arm64: dts: rockchip: fix rk809 interrupt pin on rk3566-roc-pc

The RK809 PMIC interrupt pin on the Firefly ROC-RK3566-PC (Station M2)
is physically connected to GPIO0_A3 (RK_PA3) according to the board's
schematic.

Currently, the PMIC node incorrectly specifies RK_PA7 for the interrupt,
which prevents the PMIC from correctly signaling interrupts. (Note that
the pinctrl node 'pmic_int' correctly configures RK_PA3).

Fix this by updating the interrupts property to use RK_PA3.

Fixes: 30ac9b4e25d8 ("arm64: dts: rockchip: add dts for Firefly Station M2 rk3566")
Signed-off-by: Weixin Guo <2298701336@qq.com>
Link: https://patch.msgid.link/tencent_5035EEE630C845B1B51DEA4284DE23DCCE06@qq.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 7e499064e0357994ca106e7e60443ab2f6439616..985770e3a5e2cc90675d8006128f2bd69d58d6c3 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -245,7 +245,7 @@
                compatible = "rockchip,rk809";
                reg = <0x20>;
                interrupt-parent = <&gpio0>;
-               interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+               interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
                clock-output-names = "rk808-clkout1", "rk808-clkout2";
                assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
                assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;