#
if [ $# -lt 6 ]; then
-cat <<EOF
+ cat <<EOF
Usage: test_dfree_quota.sh SERVER DOMAIN USERNAME PASSWORD LOCAL_PATH SMBCLIENT SMBCQUOTAS SMBCACLS
EOF
-exit 1;
+ exit 1
fi
SERVER=$1
DOMAIN=$2
USERNAME=$3
PASSWORD=$4
-ENVDIR=`dirname $5`
+ENVDIR=$(dirname $5)
WORKDIR=$5/dfree
smbclient=$6
smbcquotas=$7
CONFFILE=$ENVDIR/lib/dfq.conf
-incdir=`dirname $0`/../../../testprogs/blackbox
+incdir=$(dirname $0)/../../../testprogs/blackbox
. $incdir/subunit.sh
-sighup_smbd() {
- kill -HUP -`cat $ENVDIR/pid/smbd.pid`
+sighup_smbd()
+{
+ kill -HUP -$(cat $ENVDIR/pid/smbd.pid)
}
-conf_lines() {
- local uid
- local gid
- uid=$(id -u $USERNAME)
- gid=$(id -g $USERNAME)
- uid1=$(id -u user1)
- uid2=$(id -u user2)
-cat <<ABC
+conf_lines()
+{
+ local uid
+ local gid
+ uid=$(id -u $USERNAME)
+ gid=$(id -g $USERNAME)
+ uid1=$(id -u user1)
+ uid2=$(id -u user2)
+ cat <<ABC
conf1:df:block size = 512:disk free = 10:disk size = 20
conf2:df:block size = 1024:disk free = 10:disk size = 20
conf3:df:block size = 4096:disk free = 750:disk size = 281474976710656
ABC
}
-setup_1_conf() {
- conf_name="$1"
- subdir="$2"
- absdir=`readlink -f $WORKDIR/$subdir`
- conf_lines | sed -rn "s/^$conf_name:(.*)/\1/p" | tr ":" "\n" | \
- awk -F '=' -v atdir=$absdir 'NF==1 {section=$1} NF==2 {sub(/\s*$/, "", $1); printf "\tfake_dfq:%s/%s/%s =%s\n", section, $1, atdir, $2}'
+setup_1_conf()
+{
+ conf_name="$1"
+ subdir="$2"
+ absdir=$(readlink -f $WORKDIR/$subdir)
+ conf_lines | sed -rn "s/^$conf_name:(.*)/\1/p" | tr ":" "\n" |
+ awk -F '=' -v atdir=$absdir 'NF==1 {section=$1} NF==2 {sub(/\s*$/, "", $1); printf "\tfake_dfq:%s/%s/%s =%s\n", section, $1, atdir, $2}'
}
-setup_conf() {
- rm $CONFFILE
- touch $CONFFILE
+setup_conf()
+{
+ rm $CONFFILE
+ touch $CONFFILE
- until [ -z "$1" ]
- do
- setup_1_conf $1 $2 >> $CONFFILE
- shift
- shift
- done
- sighup_smbd
- #let it load...
- sleep .5
+ until [ -z "$1" ]; do
+ setup_1_conf $1 $2 >>$CONFFILE
+ shift
+ shift
+ done
+ sighup_smbd
+ #let it load...
+ sleep .5
}
-
-test_smbclient_dfree() {
+test_smbclient_dfree()
+{
name="$1"
- share="$2"
- dir="$3"
- confs="$4"
- expected="$5"
- shift
- shift
- shift
- shift
- subunit_start_test "$name"
- setup_conf $confs
- output=$($VALGRIND $smbclient //$SERVER/$share -c "cd $dir; l" $@ 2>&1)
- status=$?
- if [ "$status" = "0" ]; then
+ share="$2"
+ dir="$3"
+ confs="$4"
+ expected="$5"
+ shift
+ shift
+ shift
+ shift
+ subunit_start_test "$name"
+ setup_conf $confs
+ output=$($VALGRIND $smbclient //$SERVER/$share -c "cd $dir; l" $@ 2>&1)
+ status=$?
+ if [ "$status" = "0" ]; then
received=$(echo "$output" | awk '/blocks of size/ {print $1, $5, $6}')
if [ "$expected" = "$received" ]; then
subunit_pass_test "$name"
# Issue two queries to different directories in one session to test
# caching effects
-test_smbclient_dfree_2() {
+test_smbclient_dfree_2()
+{
name="$1"
share="$2"
dir1="$3"
subunit_start_test "$name"
setup_conf $confs
output=$($VALGRIND $smbclient //$SERVER/$share \
- -c "cd $dir1; du; cd ..; cd $dir2 ; du" $@ 2>&1)
+ -c "cd $dir1; du; cd ..; cd $dir2 ; du" $@ 2>&1)
status=$?
if [ "$status" = "0" ]; then
- received=$(echo "$output" | \
- awk '/blocks of size/ {print $1, $5, $6}' | \
- tr '\n' ' ')
+ received=$(echo "$output" |
+ awk '/blocks of size/ {print $1, $5, $6}' |
+ tr '\n' ' ')
if [ "$expected" = "$received" ]; then
subunit_pass_test "$name"
else
return $status
}
-test_smbcquotas() {
+test_smbcquotas()
+{
name="$1"
- conf="$2"
- user="$3"
- expected="$4"
- proto="$5"
+ conf="$2"
+ user="$3"
+ expected="$4"
+ proto="$5"
+ shift
+ shift
+ shift
+ shift
shift
- shift
- shift
- shift
- shift
subunit_start_test "$name"
- setup_conf "$conf" "."
- if [ "$proto" = "smb2" ]; then
- mproto="-m SMB2"
- else
- mproto="-m SMB1"
- fi
+ setup_conf "$conf" "."
+ if [ "$proto" = "smb2" ]; then
+ mproto="-m SMB2"
+ else
+ mproto="-m SMB1"
+ fi
output=$($VALGRIND $smbcquotas $mproto //$SERVER/dfq $@ 2>/dev/null | tr '\\' '/')
status=$?
if [ $protocol != "SMB3" ] && [ $protocol != "NT1" ]; then
echo "unsupported protocol $protocol" | subunit_fail_test "Test dfree quota"
- failed=`expr $failed + 1`
+ failed=$(expr $failed + 1)
fi
if [ $protocol = "NT1" ]; then
setup_conf
#basic quota test (SMB1 only)
- test_smbcquotas "Test user quota" confq1 $USERNAME "40960/4096000/3072000" "smb1" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=NT1 || failed=`expr $failed + 1`
+ test_smbcquotas "Test user quota" confq1 $USERNAME "40960/4096000/3072000" "smb1" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=NT1 || failed=$(expr $failed + 1)
exit $failed
fi
#basic disk-free tests
-test_smbclient_dfree "Test dfree share root SMB3 no quota" dfq "." "conf1 ." "10 1024. 5" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
-test_smbclient_dfree "Test dfree subdir SMB3 no quota" dfq "subdir1" "conf1 . conf2 subdir1" "20 1024. 10" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
-test_smbclient_dfree "Test large disk" dfq "." "conf3 ." "1125899906842624 1024. 3000" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+test_smbclient_dfree "Test dfree share root SMB3 no quota" dfq "." "conf1 ." "10 1024. 5" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
+test_smbclient_dfree "Test dfree subdir SMB3 no quota" dfq "subdir1" "conf1 . conf2 subdir1" "20 1024. 10" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
+test_smbclient_dfree "Test large disk" dfq "." "conf3 ." "1125899906842624 1024. 3000" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
#basic quota test (SMB2 only)
-test_smbcquotas "Test user quota" confq1 $USERNAME "40960/4096000/3072000" "smb2" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB2 || failed=`expr $failed + 1`
+test_smbcquotas "Test user quota" confq1 $USERNAME "40960/4096000/3072000" "smb2" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB2 || failed=$(expr $failed + 1)
# Test dfree cache through queries in two different directories
test_smbclient_dfree_2 "Test dfree cache" dfq_cache "." "subdir1" \
- "conf1 . conf2 subdir1" "10 1024. 5 20 1024. 10 " \
- -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 \
- || failed=`expr $failed + 1`
+ "conf1 . conf2 subdir1" "10 1024. 5 20 1024. 10 " \
+ -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 ||
+ failed=$(expr $failed + 1)
#quota limit > disk size, remaining quota > disk free
-test_smbclient_dfree "Test dfree share root df vs quota case 1" dfq "." "confdfq1 ." "80 1024. 40" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+test_smbclient_dfree "Test dfree share root df vs quota case 1" dfq "." "confdfq1 ." "80 1024. 40" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
#quota limit > disk size, remaining quota < disk free
-test_smbclient_dfree "Test dfree share root df vs quota case 2" dfq "." "confdfq2 ." "80 1024. 12" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+test_smbclient_dfree "Test dfree share root df vs quota case 2" dfq "." "confdfq2 ." "80 1024. 12" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
#quota limit < disk size, remaining quota > disk free
-test_smbclient_dfree "Test dfree share root df vs quota case 3" dfq "." "confdfq3 ." "160 1024. 40" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+test_smbclient_dfree "Test dfree share root df vs quota case 3" dfq "." "confdfq3 ." "160 1024. 40" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
#quota limit < disk size, remaining quota < disk free
-test_smbclient_dfree "Test dfree share root df vs quota case 4" dfq "." "confdfq4 ." "160 1024. 12" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
-test_smbclient_dfree "Test dfree subdir df vs quota case 4" dfq "subdir1" "confdfq4 subdir1" "160 1024. 12" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+test_smbclient_dfree "Test dfree share root df vs quota case 4" dfq "." "confdfq4 ." "160 1024. 12" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
+test_smbclient_dfree "Test dfree subdir df vs quota case 4" dfq "subdir1" "confdfq4 subdir1" "160 1024. 12" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
#quota-->disk free special cases
-test_smbclient_dfree "Test quota->dfree soft limit" dfq "subdir1" "slimit subdir1" "168 1024. 0" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
-test_smbclient_dfree "Test quota->dfree hard limit" dfq "subdir1" "hlimit subdir1" "180 1024. 0" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
-test_smbclient_dfree "Test quota->dfree inode soft limit" dfq "subdir1" "islimit subdir1" "148 1024. 0" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
-test_smbclient_dfree "Test quota->dfree inode hard limit" dfq "subdir1" "ihlimit subdir1" "148 1024. 0" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
-test_smbclient_dfree "Test quota->dfree err try group" dfq "subdir1" "trygrp1 subdir1" "240 1024. 20" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
-test_smbclient_dfree "Test quota->dfree no-quota try group" dfq "subdir1" "trygrp2 subdir1" "240 1024. 16" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+test_smbclient_dfree "Test quota->dfree soft limit" dfq "subdir1" "slimit subdir1" "168 1024. 0" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
+test_smbclient_dfree "Test quota->dfree hard limit" dfq "subdir1" "hlimit subdir1" "180 1024. 0" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
+test_smbclient_dfree "Test quota->dfree inode soft limit" dfq "subdir1" "islimit subdir1" "148 1024. 0" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
+test_smbclient_dfree "Test quota->dfree inode hard limit" dfq "subdir1" "ihlimit subdir1" "148 1024. 0" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
+test_smbclient_dfree "Test quota->dfree err try group" dfq "subdir1" "trygrp1 subdir1" "240 1024. 20" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
+test_smbclient_dfree "Test quota->dfree no-quota try group" dfq "subdir1" "trygrp2 subdir1" "240 1024. 16" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
# sgid on directory
test_smbclient_dfree "Test quota on sgid directory" dfq "subdir1" \
- "sgid subdir1" "200 1024. 40" -U$USERNAME%$PASSWORD \
- --option=clientmaxprotocol=SMB3 \
- || failed=`expr $failed + 1`
+ "sgid subdir1" "200 1024. 40" -U$USERNAME%$PASSWORD \
+ --option=clientmaxprotocol=SMB3 ||
+ failed=$(expr $failed + 1)
#block size different in quota and df systems
-test_smbclient_dfree "Test quota->dfree different block size" dfq "subdir1" "blksize subdir1" "307200 1024. 307200" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+test_smbclient_dfree "Test quota->dfree different block size" dfq "subdir1" "blksize subdir1" "307200 1024. 307200" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
#quota configured but not enforced
-test_smbclient_dfree "Test dfree share root quota not enforced" dfq "." "notenforce ." "320 1024. 40" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+test_smbclient_dfree "Test dfree share root quota not enforced" dfq "." "notenforce ." "320 1024. 40" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
#FS quota not implemented (NFS case)
-test_smbclient_dfree "Test dfree share root FS quota not implemented" dfq "." "nfs ." "160 1024. 12" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+test_smbclient_dfree "Test dfree share root FS quota not implemented" dfq "." "nfs ." "160 1024. 12" -U$USERNAME%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
#test for dfree when owner is inherited
#setup two folders with different owners
rm -rf $WORKDIR/subdir3/*
-for d in / subdir3
-do
- $VALGRIND $smbcacls -U$USERNAME%$PASSWORD -D "ACL:$SERVER\user1:ALLOWED/0x0/FULL" //$SERVER/dfq $d > /dev/null 2>&1
- $VALGRIND $smbcacls -U$USERNAME%$PASSWORD -a "ACL:$SERVER\user1:ALLOWED/0x0/FULL" //$SERVER/dfq $d || failed=`expr $failed + 1`
- $VALGRIND $smbcacls -U$USERNAME%$PASSWORD -D "ACL:$SERVER\user2:ALLOWED/0x0/FULL" //$SERVER/dfq $d > /dev/null 2>&1
- $VALGRIND $smbcacls -U$USERNAME%$PASSWORD -a "ACL:$SERVER\user2:ALLOWED/0x0/FULL" //$SERVER/dfq $d || failed=`expr $failed + 1`
+for d in / subdir3; do
+ $VALGRIND $smbcacls -U$USERNAME%$PASSWORD -D "ACL:$SERVER\user1:ALLOWED/0x0/FULL" //$SERVER/dfq $d >/dev/null 2>&1
+ $VALGRIND $smbcacls -U$USERNAME%$PASSWORD -a "ACL:$SERVER\user1:ALLOWED/0x0/FULL" //$SERVER/dfq $d || failed=$(expr $failed + 1)
+ $VALGRIND $smbcacls -U$USERNAME%$PASSWORD -D "ACL:$SERVER\user2:ALLOWED/0x0/FULL" //$SERVER/dfq $d >/dev/null 2>&1
+ $VALGRIND $smbcacls -U$USERNAME%$PASSWORD -a "ACL:$SERVER\user2:ALLOWED/0x0/FULL" //$SERVER/dfq $d || failed=$(expr $failed + 1)
done
-$VALGRIND $smbclient //$SERVER/dfq -c "cd subdir3; mkdir user1" -Uuser1%$PASSWORD --option=clientmaxprotocol=SMB3 > /dev/null 2>&1 || failed=`expr $failed + 1`
-$VALGRIND $smbclient //$SERVER/dfq -c "cd subdir3; mkdir user2" -Uuser2%$PASSWORD --option=clientmaxprotocol=SMB3 > /dev/null 2>&1 || failed=`expr $failed + 1`
+$VALGRIND $smbclient //$SERVER/dfq -c "cd subdir3; mkdir user1" -Uuser1%$PASSWORD --option=clientmaxprotocol=SMB3 >/dev/null 2>&1 || failed=$(expr $failed + 1)
+$VALGRIND $smbclient //$SERVER/dfq -c "cd subdir3; mkdir user2" -Uuser2%$PASSWORD --option=clientmaxprotocol=SMB3 >/dev/null 2>&1 || failed=$(expr $failed + 1)
#test quotas
test_smbclient_dfree "Test dfree without inherit owner - user1 at user1" \
- dfq "subdir3/user1" "confdfqp subdir3/user1 confdfqp subdir3/user2" "160 1024. 16" \
- -Uuser1%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+ dfq "subdir3/user1" "confdfqp subdir3/user1 confdfqp subdir3/user2" "160 1024. 16" \
+ -Uuser1%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
test_smbclient_dfree "Test dfree without inherit owner - user1 at user2" \
- dfq "subdir3/user2" "confdfqp subdir3/user1 confdfqp subdir3/user2" "160 1024. 16" \
- -Uuser1%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+ dfq "subdir3/user2" "confdfqp subdir3/user1 confdfqp subdir3/user2" "160 1024. 16" \
+ -Uuser1%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
test_smbclient_dfree "Test dfree with inherit owner - user1 at user1" \
- dfq_owner "subdir3/user1" "confdfqp subdir3/user1 confdfqp subdir3/user2" "160 1024. 16" \
- -Uuser1%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+ dfq_owner "subdir3/user1" "confdfqp subdir3/user1 confdfqp subdir3/user2" "160 1024. 16" \
+ -Uuser1%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
test_smbclient_dfree "Test dfree with inherit owner - user1 at user2" \
- dfq_owner "subdir3/user2" "confdfqp subdir3/user1 confdfqp subdir3/user2" "164 1024. 20" \
- -Uuser1%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=`expr $failed + 1`
+ dfq_owner "subdir3/user2" "confdfqp subdir3/user1 confdfqp subdir3/user2" "164 1024. 20" \
+ -Uuser1%$PASSWORD --option=clientmaxprotocol=SMB3 || failed=$(expr $failed + 1)
setup_conf
exit $failed
projects / thirdparty / samba.git / commitdiff
