+(4.2.5p249-RC) 2009/11/28 Released by Harlan Stenn <stenn@ntp.org>
* [Bug 1400] An empty KOD DB file causes sntp to coredump.
* sntp: documentation cleanup.
* sntp: clean up some error messages.
/*
* EDIT THIS FILE WITH CAUTION (ntpd-opts.c)
*
- * It has been AutoGen-ed November 26, 2009 at 05:30:58 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:21:41 AM by AutoGen 5.10
* From the definitions ntpd-opts.def
* and the template file options
*
*/
tSCC zPROGNAME[] = "NTPD";
tSCC zUsageTitle[] =
-"ntpd - NTP daemon program - Ver. 4.2.5p248-RC\n\
+"ntpd - NTP daemon program - Ver. 4.2.5p249-RC\n\
USAGE: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]...\n";
#define zRcName NULL
#define apzHomeList NULL
/*
* EDIT THIS FILE WITH CAUTION (ntpd-opts.h)
*
- * It has been AutoGen-ed November 26, 2009 at 05:30:57 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:21:40 AM by AutoGen 5.10
* From the definitions ntpd-opts.def
* and the template file options
*
} teOptIndex;
#define OPTION_CT 35
-#define NTPD_VERSION "4.2.5p248-RC"
-#define NTPD_FULL_VERSION "ntpd - NTP daemon program - Ver. 4.2.5p248-RC"
+#define NTPD_VERSION "4.2.5p249-RC"
+#define NTPD_FULL_VERSION "ntpd - NTP daemon program - Ver. 4.2.5p249-RC"
/*
* Interface defines for all options. Replace "n" with the UPPER_CASED
#
# EDIT THIS FILE WITH CAUTION (ntpd-opts.texi)
#
-# It has been AutoGen-ed November 26, 2009 at 05:31:40 AM by AutoGen 5.10
+# It has been AutoGen-ed November 28, 2009 at 05:22:01 AM by AutoGen 5.10
# From the definitions ntpd-opts.def
# and the template file aginfo.tpl
@end ignore
@exampleindent 0
@example
-ntpd - NTP daemon program - Ver. 4.2.5p247-RC
-USAGE: ntpd [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
- Flg Arg Option-Name Description
- -4 no ipv4 Force IPv4 DNS name resolution
- - prohibits these options:
- ipv6
- -6 no ipv6 Force IPv6 DNS name resolution
- - prohibits these options:
- ipv4
- -a no authreq Require crypto authentication
- - prohibits these options:
- authnoreq
- -A no authnoreq Do not require crypto authentication
- - prohibits these options:
- authreq
- -b no bcastsync Allow us to sync to broadcast servers
- -c Str configfile configuration file name
- -d no debug-level Increase output debug message level
- - may appear multiple times
- -D Str set-debug-level Set the output debug message level
- - may appear multiple times
- -f Str driftfile frequency drift file name
- -g no panicgate Allow the first adjustment to be Big
- - may appear multiple times
- -i --- jaildir built without --enable-clockctl or --enable-linuxcaps
- -I Str interface Listen on an interface name or address
- - may appear multiple times
- -k Str keyfile path to symmetric keys
- -l Str logfile path to the log file
- -L no novirtualips Do not listen to virtual interfaces
- -n no nofork Do not fork
- -N no nice Run at high priority
- -p Str pidfile path to the PID file
- -P Num priority Process priority
- -q no quit Set the time and quit
- -r Str propagationdelay Broadcast/propagation delay
- Str saveconfigquit Save parsed configuration and quit
- -s Str statsdir Statistics file location
- -t Str trustedkey Trusted key number
- - may appear multiple times
- -u --- user built without --enable-clockctl or --enable-linuxcaps
- -U Num updateinterval interval in seconds between scans for new or dropped interfaces
- Str var make ARG an ntp variable (RW)
- - may appear multiple times
- Str dvar make ARG an ntp variable (RW|DEF)
- - may appear multiple times
- -x no slew Slew up to 600 seconds
- opt version Output version information and exit
- -? no help Display extended usage information and exit
- -! no more-help Extended usage information passed thru pager
-
-Options are specified by doubled hyphens and their name
-or by a single hyphen and the flag character.
-
-The following option preset mechanisms are supported:
- - examining environment variables named NTPD_*
-
-
-
-please send bug reports to: http://bugs.ntp.org, bugs@@ntp.org
+ntpd is unavailable - no --help
@end example
@exampleindent 4
-.TH NTPD 1 2009-11-26 "( 4.2.5p248-RC)" "Programmer's Manual"
+.TH NTPD 1 2009-11-28 "( 4.2.5p249-RC)" "Programmer's Manual"
.\" EDIT THIS FILE WITH CAUTION (ntpd.1)
.\"
-.\" It has been AutoGen-ed November 26, 2009 at 05:30:59 AM by AutoGen 5.10
+.\" It has been AutoGen-ed November 28, 2009 at 05:21:42 AM by AutoGen 5.10
.\" From the definitions ntpd-opts.def
.\" and the template file agman1.tpl
.\"
/*
* EDIT THIS FILE WITH CAUTION (ntpdc-opts.c)
*
- * It has been AutoGen-ed November 26, 2009 at 05:32:19 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:22:45 AM by AutoGen 5.10
* From the definitions ntpdc-opts.def
* and the template file options
*
*/
tSCC zPROGNAME[] = "NTPDC";
tSCC zUsageTitle[] =
-"ntpdc - vendor-specific NTP query program - Ver. 4.2.5p248-RC\n\
+"ntpdc - vendor-specific NTP query program - Ver. 4.2.5p249-RC\n\
USAGE: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]\n";
tSCC zRcName[] = ".ntprc";
tSCC* apzHomeList[] = {
/*
* EDIT THIS FILE WITH CAUTION (ntpdc-opts.h)
*
- * It has been AutoGen-ed November 26, 2009 at 05:32:18 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:22:44 AM by AutoGen 5.10
* From the definitions ntpdc-opts.def
* and the template file options
*
} teOptIndex;
#define OPTION_CT 15
-#define NTPDC_VERSION "4.2.5p248-RC"
-#define NTPDC_FULL_VERSION "ntpdc - vendor-specific NTP query program - Ver. 4.2.5p248-RC"
+#define NTPDC_VERSION "4.2.5p249-RC"
+#define NTPDC_FULL_VERSION "ntpdc - vendor-specific NTP query program - Ver. 4.2.5p249-RC"
/*
* Interface defines for all options. Replace "n" with the UPPER_CASED
#
# EDIT THIS FILE WITH CAUTION (ntpdc-opts.texi)
#
-# It has been AutoGen-ed November 26, 2009 at 05:32:43 AM by AutoGen 5.10
+# It has been AutoGen-ed November 28, 2009 at 05:23:10 AM by AutoGen 5.10
# From the definitions ntpdc-opts.def
# and the template file aginfo.tpl
@end ignore
@exampleindent 0
@example
-ntpdc - vendor-specific NTP query program - Ver. 4.2.5p247-RC
-USAGE: ntpdc [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [ host ...]
- Flg Arg Option-Name Description
- -4 no ipv4 Force IPv4 DNS name resolution
- - prohibits these options:
- ipv6
- -6 no ipv6 Force IPv6 DNS name resolution
- - prohibits these options:
- ipv4
- -c Str command run a command and exit
- - may appear multiple times
- -l no listpeers Print a list of the peers
- - prohibits these options:
- command
- -p no peers Print a list of the peers
- - prohibits these options:
- command
- -s no showpeers Show a list of the peers
- - prohibits these options:
- command
- -i no interactive Force ntpq to operate in interactive mode
- - prohibits these options:
- command
- listpeers
- peers
- showpeers
- -d no debug-level Increase output debug message level
- - may appear multiple times
- -D Str set-debug-level Set the output debug message level
- - may appear multiple times
- -n no numeric numeric host addresses
- opt version Output version information and exit
- -? no help Display extended usage information and exit
- -! no more-help Extended usage information passed thru pager
- -> opt save-opts Save the option state to a config file
- -< Str load-opts Load options from a config file
- - disabled as --no-load-opts
- - may appear multiple times
-
-Options are specified by doubled hyphens and their name
-or by a single hyphen and the flag character.
-
-The following option preset mechanisms are supported:
- - reading file /users/stenn/.ntprc
- - reading file /deacon/backroom/snaps/ntp-dev/ntpdc/.ntprc
- - examining environment variables named NTPDC_*
-
-The
-[= prog-name =]
-utility program is used to query an NTP daemon about its
-current state and to request changes in that state.
-It uses NTP mode 7 control message formats described in the source code.
-The program may
-be run either in interactive mode or controlled using command line
-arguments.
-Extensive state and statistics information is available
-through the
-[= prog-name =]
-interface.
-In addition, nearly all the
-configuration options which can be specified at startup using
-ntpd's configuration file may also be specified at run time using
-[= prog-name =] .
-
-please send bug reports to: http://bugs.ntp.org, bugs@@ntp.org
+ntpdc is unavailable - no --help
@end example
@exampleindent 4
-.TH NTPDC 1 2009-11-26 "( 4.2.5p248-RC)" "Programmer's Manual"
+.TH NTPDC 1 2009-11-28 "( 4.2.5p249-RC)" "Programmer's Manual"
.\" EDIT THIS FILE WITH CAUTION (ntpdc.1)
.\"
-.\" It has been AutoGen-ed November 26, 2009 at 05:32:20 AM by AutoGen 5.10
+.\" It has been AutoGen-ed November 28, 2009 at 05:22:46 AM by AutoGen 5.10
.\" From the definitions ntpdc-opts.def
.\" and the template file agman1.tpl
.\"
/*
* EDIT THIS FILE WITH CAUTION (ntpq-opts.c)
*
- * It has been AutoGen-ed November 26, 2009 at 05:32:54 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:23:23 AM by AutoGen 5.10
* From the definitions ntpq-opts.def
* and the template file options
*
*/
tSCC zPROGNAME[] = "NTPQ";
tSCC zUsageTitle[] =
-"ntpq - standard NTP query program - Ver. 4.2.5p248-RC\n\
+"ntpq - standard NTP query program - Ver. 4.2.5p249-RC\n\
USAGE: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]\n";
tSCC zRcName[] = ".ntprc";
tSCC* apzHomeList[] = {
/*
* EDIT THIS FILE WITH CAUTION (ntpq-opts.h)
*
- * It has been AutoGen-ed November 26, 2009 at 05:32:54 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:23:22 AM by AutoGen 5.10
* From the definitions ntpq-opts.def
* and the template file options
*
} teOptIndex;
#define OPTION_CT 14
-#define NTPQ_VERSION "4.2.5p248-RC"
-#define NTPQ_FULL_VERSION "ntpq - standard NTP query program - Ver. 4.2.5p248-RC"
+#define NTPQ_VERSION "4.2.5p249-RC"
+#define NTPQ_FULL_VERSION "ntpq - standard NTP query program - Ver. 4.2.5p249-RC"
/*
* Interface defines for all options. Replace "n" with the UPPER_CASED
#
# EDIT THIS FILE WITH CAUTION (ntpq-opts.texi)
#
-# It has been AutoGen-ed November 26, 2009 at 05:33:17 AM by AutoGen 5.10
+# It has been AutoGen-ed November 28, 2009 at 05:23:46 AM by AutoGen 5.10
# From the definitions ntpq-opts.def
# and the template file aginfo.tpl
@end ignore
@exampleindent 0
@example
-ntpq - standard NTP query program - Ver. 4.2.5p247-RC
-USAGE: ntpq [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [ host ...]
- Flg Arg Option-Name Description
- -4 no ipv4 Force IPv4 DNS name resolution
- - prohibits these options:
- ipv6
- -6 no ipv6 Force IPv6 DNS name resolution
- - prohibits these options:
- ipv4
- -c Str command run a command and exit
- - may appear multiple times
- -d no debug-level Increase output debug message level
- - may appear multiple times
- -D Str set-debug-level Set the output debug message level
- - may appear multiple times
- -p no peers Print a list of the peers
- - prohibits these options:
- interactive
- -i no interactive Force ntpq to operate in interactive mode
- - prohibits these options:
- command
- peers
- -n no numeric numeric host addresses
- no old-rv Always output status line with readvar
- opt version Output version information and exit
- -? no help Display extended usage information and exit
- -! no more-help Extended usage information passed thru pager
- -> opt save-opts Save the option state to a config file
- -< Str load-opts Load options from a config file
- - disabled as --no-load-opts
- - may appear multiple times
-
-Options are specified by doubled hyphens and their name
-or by a single hyphen and the flag character.
-
-The following option preset mechanisms are supported:
- - reading file /users/stenn/.ntprc
- - reading file /deacon/backroom/snaps/ntp-dev/ntpq/.ntprc
- - examining environment variables named NTPQ_*
-
-The
-[= prog-name =]
-utility program is used to query NTP servers which
-implement the standard NTP mode 6 control message formats defined
-in Appendix B of the NTPv3 specification RFC1305, requesting
-information about current state and/or changes in that state.
-The same formats are used in NTPv4, although some of the
-variables have changed and new ones added.
-
-please send bug reports to: http://bugs.ntp.org, bugs@@ntp.org
+ntpq is unavailable - no --help
@end example
@exampleindent 4
-.TH NTPQ 1 2009-11-26 "( 4.2.5p248-RC)" "Programmer's Manual"
+.TH NTPQ 1 2009-11-28 "( 4.2.5p249-RC)" "Programmer's Manual"
.\" EDIT THIS FILE WITH CAUTION (ntpq.1)
.\"
-.\" It has been AutoGen-ed November 26, 2009 at 05:32:55 AM by AutoGen 5.10
+.\" It has been AutoGen-ed November 28, 2009 at 05:23:24 AM by AutoGen 5.10
.\" From the definitions ntpq-opts.def
.\" and the template file agman1.tpl
.\"
/*
* EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.c)
*
- * It has been AutoGen-ed November 26, 2009 at 05:33:32 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:24:08 AM by AutoGen 5.10
* From the definitions ntpsnmpd-opts.def
* and the template file options
*
*/
tSCC zPROGNAME[] = "NTPSNMPD";
tSCC zUsageTitle[] =
-"ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.5p248-RC\n\
+"ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.5p249-RC\n\
USAGE: %s [ -<flag> | --<name> ]...\n";
tSCC zRcName[] = ".ntprc";
tSCC* apzHomeList[] = {
/*
* EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.h)
*
- * It has been AutoGen-ed November 26, 2009 at 05:33:31 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:24:07 AM by AutoGen 5.10
* From the definitions ntpsnmpd-opts.def
* and the template file options
*
} teOptIndex;
#define OPTION_CT 7
-#define NTPSNMPD_VERSION "4.2.5p248-RC"
-#define NTPSNMPD_FULL_VERSION "ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.5p248-RC"
+#define NTPSNMPD_VERSION "4.2.5p249-RC"
+#define NTPSNMPD_FULL_VERSION "ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.5p249-RC"
/*
* Interface defines for all options. Replace "n" with the UPPER_CASED
#
# EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.texi)
#
-# It has been AutoGen-ed November 26, 2009 at 05:33:43 AM by AutoGen 5.10
+# It has been AutoGen-ed November 28, 2009 at 05:24:21 AM by AutoGen 5.10
# From the definitions ntpsnmpd-opts.def
# and the template file aginfo.tpl
@end ignore
@exampleindent 0
@example
-ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.5p247-RC
-USAGE: ntpsnmpd [ -<flag> | --<name> ]...
- Flg Arg Option-Name Description
- -n no nofork Do not fork
- -p no syslog Log to syslog()
- opt version Output version information and exit
- -? no help Display extended usage information and exit
- -! no more-help Extended usage information passed thru pager
- -> opt save-opts Save the option state to a config file
- -< Str load-opts Load options from a config file
- - disabled as --no-load-opts
- - may appear multiple times
-
-Options are specified by doubled hyphens and their name
-or by a single hyphen and the flag character.
-
-The following option preset mechanisms are supported:
- - reading file /users/stenn/.ntprc
- - reading file /deacon/backroom/snaps/ntp-dev/ntpsnmpd/.ntprc
- - examining environment variables named NTPSNMPD_*
-
-please send bug reports to: http://bugs.ntp.org, bugs@@ntp.org
+ntpsnmpd is unavailable - no --help
@end example
@exampleindent 4
-.TH NTPSNMPD 1 2009-11-26 "( 4.2.5p248-RC)" "Programmer's Manual"
+.TH NTPSNMPD 1 2009-11-28 "( 4.2.5p249-RC)" "Programmer's Manual"
.\" EDIT THIS FILE WITH CAUTION (ntpsnmpd.1)
.\"
-.\" It has been AutoGen-ed November 26, 2009 at 05:33:33 AM by AutoGen 5.10
+.\" It has been AutoGen-ed November 28, 2009 at 05:24:09 AM by AutoGen 5.10
.\" From the definitions ntpsnmpd-opts.def
.\" and the template file agman1.tpl
.\"
# - Numeric values increment
# - empty 'increments' to 1
# - NEW 'increments' to empty
-point=248
+point=249
# Special. Normally unused. A suffix.
#special=ag
special=
/*
* EDIT THIS FILE WITH CAUTION (sntp-opts.c)
*
- * It has been AutoGen-ed November 26, 2009 at 05:38:25 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:27:55 AM by AutoGen 5.10
* From the definitions sntp-opts.def
* and the template file options
*
"Specify the number of seconds to wait for broadcasts";
tSCC zTimeout_NAME[] = "TIMEOUT";
tSCC zTimeout_Name[] = "timeout";
+#define zTimeoutDefaultArg ((char const*)68)
#define TIMEOUT_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
/* equivalenced to */ NO_EQUIVALENT,
/* min, max, act ct */ 0, 1, 0,
/* opt state flags */ TIMEOUT_FLAGS, 0,
- /* last opt argumnt */ { NULL },
+ /* last opt argumnt */ { zTimeoutDefaultArg },
/* arg list/cookie */ NULL,
/* must/cannot opts */ NULL, NULL,
/* option proc */ optionNumericVal,
*/
tSCC zPROGNAME[] = "SNTP";
tSCC zUsageTitle[] =
-"sntp - standard SNTP program - Ver. 4.2.5p248-RC\n\
+"sntp - standard SNTP program - Ver. 4.2.5p249-RC\n\
USAGE: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... hostname-or-IP ...\n";
tSCC zRcName[] = ".ntprc";
tSCC* apzHomeList[] = {
to query an NTP or SNTP server and either\n\
display the time\n\
or\n\
-set the local system's time (given suitable privilege).\n\
+set the local system's time (given suitable privilege).\n\n\
It can be\n\
run interactively from the command line or as a\n\
.I cron\n\
job.\n\n\
-NTP and SNTP are defined by draft-ietf-ntp-ntpv4-proto-11, which\n\
+NTP and SNTP are defined by draft-ietf-ntp-ntpv4-proto-13, which\n\
obsoletes RFC 4330 and RFC 1305.\n";
tSCC zFullVersion[] = SNTP_FULL_VERSION;
/* extracted from /usr/local/gnu/share/autogen/optcode.tpl near line 495 */
/*
* EDIT THIS FILE WITH CAUTION (sntp-opts.h)
*
- * It has been AutoGen-ed November 26, 2009 at 05:38:25 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:27:55 AM by AutoGen 5.10
* From the definitions sntp-opts.def
* and the template file options
*
} teOptIndex;
#define OPTION_CT 17
-#define SNTP_VERSION "4.2.5p248-RC"
-#define SNTP_FULL_VERSION "sntp - standard SNTP program - Ver. 4.2.5p248-RC"
+#define SNTP_VERSION "4.2.5p249-RC"
+#define SNTP_FULL_VERSION "sntp - standard SNTP program - Ver. 4.2.5p249-RC"
/*
* Interface defines for all options. Replace "n" with the UPPER_CASED
#
# EDIT THIS FILE WITH CAUTION (sntp-opts.texi)
#
-# It has been AutoGen-ed November 26, 2009 at 05:38:30 AM by AutoGen 5.10
+# It has been AutoGen-ed November 28, 2009 at 05:28:05 AM by AutoGen 5.10
# From the definitions sntp-opts.def
# and the template file aginfo.tpl
@end ignore
display the time
or
set the local system's time (given suitable privilege).
+
It can be
run interactively from the command line or as a
.I cron
job.
-NTP and SNTP are defined by draft-ietf-ntp-ntpv4-proto-11, which
+NTP and SNTP are defined by draft-ietf-ntp-ntpv4-proto-13, which
obsoletes RFC 4330 and RFC 1305.
This section was generated by @strong{AutoGen},
@exampleindent 0
@example
-sntp - standard SNTP program - Ver. 4.2.5p247-RC
-USAGE: sntp [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... ...
- Flg Arg Option-Name Description
- -4 no ipv4 Force IPv4 DNS name resolution
- - prohibits these options:
- ipv6
- -6 no ipv6 Force IPv6 DNS name resolution
- - prohibits these options:
- ipv4
- -d no normalverbose Normal verbose
- -K Str kod KoD history filename
- -p no syslog Logging with syslog
- - prohibits these options:
- filelog
- -l Str filelog Logging to specified logfile
- - prohibits these options:
- syslog
- -s no settod Set (step) the time with settimeofday()
- - prohibits these options:
- adjtime
- -j no adjtime Set (slew) the time with adjtime()
- - prohibits these options:
- settod
- -b Str broadcast Use broadcasts to the address specified for synchronisation
- -t Num timeout Specify the number of seconds to wait for broadcasts
- -a Num authentication Enable authentication with the key keyno. This option is used as -a keyno
- -k Str keyfile Specify a keyfile. SNTP will look in this file for the key specified with -a
- opt version Output version information and exit
- -? no help Display extended usage information and exit
- -! no more-help Extended usage information passed thru pager
- -> opt save-opts Save the option state to a config file
- -< Str load-opts Load options from a config file
- - disabled as --no-load-opts
- - may appear multiple times
-
-Options are specified by doubled hyphens and their name
-or by a single hyphen and the flag character.
-
-The following option preset mechanisms are supported:
- - reading file /users/stenn/.ntprc
- - reading file /deacon/backroom/snaps/ntp-dev/sntp/.ntprc
- - examining environment variables named SNTP_*
-
-.I sntp
-can be used as a SNTP client to query a NTP or SNTP server and either display
-the time or set the local system's time (given suitable privilege). It can be
-run as an interactive command or in a
-.I cron
-job.
-NTP is the Network Time Protocol (RFC 1305) and SNTP is the
-Simple Network Time Protocol (RFC 2030, which supersedes RFC 1769).
-
-please send bug reports to: http://bugs.ntp.org, bugs@@ntp.org
+sntp is unavailable - no --help
@end example
@exampleindent 4
-.TH SNTP 1 2009-11-26 "( 4.2.5p248-RC)" "Programmer's Manual"
+.TH SNTP 1 2009-11-28 "( 4.2.5p249-RC)" "Programmer's Manual"
.\" EDIT THIS FILE WITH CAUTION (sntp.1)
.\"
-.\" It has been AutoGen-ed November 26, 2009 at 05:38:30 AM by AutoGen 5.10
+.\" It has been AutoGen-ed November 28, 2009 at 05:28:06 AM by AutoGen 5.10
.\" From the definitions sntp-opts.def
.\" and the template file agman1.tpl
.\"
run as an interactive command or in a
.I cron
job.
-NTP is the Network Time Protocol (RFC 1305) and SNTP is the
-Simple Network Time Protocol (RFC 2030, which supersedes RFC 1769).
-.SS Options
-.PP
-.I sntp
-recognizes the following options:
-.TP
-.B \-v
-indicates that diagnostic messages for non-fatal errors and a limited amount of
-tracing should be written to standard error. Fatal ones always produce a
-diagnostic. This option should be set when there is a suspected problem with
-the server, network or the source.
-.TP
-.B \-V
-requests more and less comprehensible output, mainly for investigating problems
-with apparently inconsistent timestamps. This option should be set when the
-program fails with a message indicating that is the trouble.
-.TP
-.B \-W
-requests very verbose debugging output, and will interfere with the timing
-when writing to the terminal (because of line buffered output from C). Note
-that the times produced by this are the corrections needed, and not the error
-in the local clock. This option should be set only when debugging the source.
-.TP
-.B \-r
-indicates that the system clock should be reset by
-.IR settod .
-Naturally, this will work only if the user has enough privilege.
-.TP
-.B \-a
-indicates that the system clock should be reset by
-.IR adjtime .
-Naturally, this will work only if the user has enough privilege.
+
+NTP (the Network Time Protocol) and SNTP (the Simple Network Time Protocol)
+are defined and described by
+draft-ietf-ntp-ntpv4-proto-13,
+which should become a full RFC any month now.
+
.PP
The default is to write the estimated correct local date and time (i.e. not
UTC) to the standard output in a format like
.BR "'1996 Oct 15 20:17:25.123 + 4.567 +/- 0.089 secs'" ,
where the
.B "'+ 4.567 +/- 0.089 secs'"
-indicates the estimated error in the time on the local system.
-.TP
-.BI \-l " lockfile"
-sets the name of the lock file to ensure that there is only
-one copy of
-.I sntp
-running at once. The default is installation-dependent, but will usually be
-.IR /etc/sntp.pid .
-.TP
-.BI \-c " count"
-sets the maximum number of NTP packets required to
-.IR count .
-Acceptable values are from 1 to 25 if a NTP host is specified and from 5 to 25
-otherwise, and the default is 5. If the maximum isn't enough, the system needs
-a better consistency algorithm than this program uses.
-.TP
-.B \-4
-force IPv4 DNS resolution.
-.TP
-.B \-6
-force IPv6 DNS resolution.
-.PP
-.B address(es)
-are the DNS names or IP numbers of hosts to use for the challenge and response
-protocol; if no names are given, the program waits for broadcasts. Polling a
-server is vastly more reliable than listening to broadcasts. Note that a
-single component numeric address is not allowed, to avoid ambiguities. If
-more than one name is give, they will be used in a round-robin fashion.
-.PP
-Constraints:
-.IP
-.BR delay / count "),"
-and
-.B count
-must be less than half of
-.BR delay .
-.IP
-In update mode,
-.B maxerr
-must be less than
+indicates the local clock is 4.567 seconds behind the correct time
+(so 4.567 seconds must be added to the local clock to get it to be correct),
+and the time of
+'1996 Oct 15 20:17:25.123'
+is believed to be correct to within
++/- 0.089
+seconds.
.SH USAGE
The simplest use of this program is as an unprivileged command to check the
current time and error in the local clock. For example:
.BR \-t " \fInumber\fP, " \--timeout "=" \fInumber\fP
Specify the number of seconds to wait for broadcasts.
This option takes an integer number as its argument.
+The default \fInumber\fP for this option is:
+.ti +4
+ 68
.sp
When waiting for a broadcast packet SNTP will wait the number
of seconds specified before giving up. Default 68 seconds.
<title>Sntp User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="Sntp User's Manual">
-<meta name="generator" content="makeinfo 4.6">
+<meta name="generator" content="makeinfo 4.13">
+<link title="Top" rel="top" href="#Top">
+<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
<style type="text/css"><!--
pre.display { font-family:inherit }
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">Sntp User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-Node: <a name="Top">Top</a>,
-Next: <a rel="next" accesskey="n" href="#sntp%20Description">sntp Description</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-Description">sntp Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">Simple Network Time Protocol User Manual</h2>
clock. Run as root, it can correct the system clock to this offset as
well. It can be run as an interactive command or from a cron job.
- <p>This document applies to version 4.2.5p248-RC of sntp.
+ <p>This document applies to version 4.2.5p249-RC of sntp.
<p>The program implements the SNTP protocol as defined by the draft NTPv4
IETF specification.
-
-<div class="shortcontents">
+ <div class="shortcontents">
<h2>Short Contents</h2>
<ul>
<a href="#Top">Simple Network Time Protocol User Manual</a>
</div>
<ul class="menu">
-<li><a accesskey="1" href="#sntp%20Description">sntp Description</a>: Description
-
-<p>* sntp Invocation:: Invoking sntp
-</p><li><a accesskey="2" href="#Usage">Usage</a>: Usage
+<li><a accesskey="1" href="#sntp-Description">sntp Description</a>: Description
+* sntp Invocation:: Invoking sntp
+<li><a accesskey="2" href="#Usage">Usage</a>: Usage
</ul>
<div class="node">
+<a name="sntp-Description"></a>
<p><hr>
-Node: <a name="sntp%20Description">sntp Description</a>,
Next: <a rel="next" accesskey="n" href="#Usage">Usage</a>,
Previous: <a rel="previous" accesskey="p" href="#Top">Top</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
+<!-- node-name, next, previous, up -->
<h3 class="section">Description</h3>
<p>By default, sntp writes the local data and time (i.e., not UTC) to the
standard output in the format:
<pre class="example"> 1996 Oct 15 20:17:25.123 + 4.567 +/- 0.089 secs
- </pre>
-
+</pre>
<p>where the + 4.567 +/- 0.089 secs indicates the time offset and
error bound of the system clock relative to the server clock.
+<!-- @include sntp-opts.texi -->
<div class="node">
+<a name="Usage"></a>
<p><hr>
-Node: <a name="Usage">Usage</a>,
-Previous: <a rel="previous" accesskey="p" href="#sntp%20Description">sntp Description</a>,
+Previous: <a rel="previous" accesskey="p" href="#sntp-Description">sntp Description</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
+<!-- node-name, next, previous, up -->
<h3 class="section">Usage</h3>
<p>The simplest use of this program is as an unprivileged command to
For example:
<pre class="example"> sntp ntpserver.somewhere
- </pre>
-
+</pre>
<p>With suitable privilege, it can be run as a command or in a
<code>crom</code> job to reset the local clock from a reliable server, like
the <code>ntpdate</code> and <code>rdate</code> commands.
For example:
<pre class="example"> sntp -a ntpserver.somewhere
- </pre>
-
+</pre>
</body></html>
+
/*
* EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.c)
*
- * It has been AutoGen-ed November 26, 2009 at 05:38:43 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:28:21 AM by AutoGen 5.10
* From the definitions ntp-keygen-opts.def
* and the template file options
*
*/
tSCC zPROGNAME[] = "NTP_KEYGEN";
tSCC zUsageTitle[] =
-"ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.5p248-RC\n\
+"ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.5p249-RC\n\
USAGE: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]...\n";
tSCC zRcName[] = ".ntprc";
tSCC* apzHomeList[] = {
/*
* EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.h)
*
- * It has been AutoGen-ed November 26, 2009 at 05:38:42 AM by AutoGen 5.10
+ * It has been AutoGen-ed November 28, 2009 at 05:28:20 AM by AutoGen 5.10
* From the definitions ntp-keygen-opts.def
* and the template file options
*
} teOptIndex;
#define OPTION_CT 23
-#define NTP_KEYGEN_VERSION "4.2.5p248-RC"
-#define NTP_KEYGEN_FULL_VERSION "ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.5p248-RC"
+#define NTP_KEYGEN_VERSION "4.2.5p249-RC"
+#define NTP_KEYGEN_FULL_VERSION "ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.5p249-RC"
/*
* Interface defines for all options. Replace "n" with the UPPER_CASED
#
# EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.texi)
#
-# It has been AutoGen-ed November 26, 2009 at 05:38:56 AM by AutoGen 5.10
+# It has been AutoGen-ed November 28, 2009 at 05:28:36 AM by AutoGen 5.10
# From the definitions ntp-keygen-opts.def
# and the template file aginfo.tpl
@end ignore
@exampleindent 0
@example
-Using OpenSSL version 90704f
-ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.5p247-RC
-USAGE: ntp-keygen [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
- Flg Arg Option-Name Description
- -c Str certificate certificate scheme
- -d no debug-level Increase output debug message level
- - may appear multiple times
- -D Str set-debug-level Set the output debug message level
- - may appear multiple times
- -e no id-key Write IFF or GQ identity keys
- -G no gq-params Generate GQ parameters and keys
- -H no host-key generate RSA host key
- -I no iffkey generate IFF parameters
- -i Str issuer-name set issuer name
- -M no md5key generate MD5 keys
- -m Num modulus modulus
- - it must be: 256 to 2048
- -P no pvt-cert generate PC private certificate
- -p Str pvt-passwd output private password
- -q Str get-pvt-passwd input private password
- -S Str sign-key generate sign key (RSA or DSA)
- -s Str subject-name set subject name
- -T no trusted-cert trusted certificate (TC scheme)
- -V Num mv-params generate <num> MV parameters
- -v Num mv-keys update <num> MV keys
- opt version Output version information and exit
- -? no help Display extended usage information and exit
- -! no more-help Extended usage information passed thru pager
- -> opt save-opts Save the option state to a config file
- -< Str load-opts Load options from a config file
- - disabled as --no-load-opts
- - may appear multiple times
-
-Options are specified by doubled hyphens and their name
-or by a single hyphen and the flag character.
-
-The following option preset mechanisms are supported:
- - reading file /users/stenn/.ntprc
- - reading file /deacon/backroom/snaps/ntp-dev/util/.ntprc
- - examining environment variables named NTP_KEYGEN_*
-
-If there is no new host key, look for an existing one.
-If one is not found, create it.
-
-please send bug reports to: http://bugs.ntp.org, bugs@@ntp.org
+ntp-keygen is unavailable - no --help
@end example
@exampleindent 4
-.TH NTP-KEYGEN 1 2009-11-26 "(ntp 4.2.5p248-RC)" "Programmer's Manual"
+.TH NTP-KEYGEN 1 2009-11-28 "(ntp 4.2.5p249-RC)" "Programmer's Manual"
.\" EDIT THIS FILE WITH CAUTION (ntp-keygen.1)
.\"
-.\" It has been AutoGen-ed November 26, 2009 at 05:38:44 AM by AutoGen 5.10
+.\" It has been AutoGen-ed November 28, 2009 at 05:28:22 AM by AutoGen 5.10
.\" From the definitions ntp-keygen-opts.def
.\" and the template file agman1.tpl
.\"
projects / thirdparty / ntp.git / commitdiff
