tests: OCV with OCI override on STA

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>

diff --git a/tests/hwsim/test_ocv.py b/tests/hwsim/test_ocv.py
index 5456f3ba045921494665273589ea61c0ab1bae18..80bdd7a5c0a5b8618d47874e14cf2ad95abe8b5f 100644 (file)
--- a/tests/hwsim/test_ocv.py
+++ b/tests/hwsim/test_ocv.py
@@ -903,3 +903,92 @@ def test_wpa2_ocv_auto_enable_pmf(dev, apdev):
                        ieee80211w="2")
         dev[0].request("REMOVE_NETWORK all")
         dev[0].wait_disconnected()
+
+def test_wpa2_ocv_sta_override_eapol(dev, apdev):
+    """OCV on 2.4 GHz and STA override EAPOL-Key msg 2/4"""
+    params = {"channel": "1",
+              "ieee80211w": "2",
+              "ocv": "1"}
+    hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+    dev[0].set("oci_freq_override_eapol", "2462")
+    dev[0].connect(ssid, psk=passphrase, scan_freq="2412", ocv="1",
+                   ieee80211w="2", wait_connect=False)
+    ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED",
+                            "CTRL-EVENT-DISCONNECTED"], timeout=15)
+    dev[0].request("DISCONNECT")
+    if ev is None:
+        raise Exception("No connection result reported")
+    if "CTRL-EVENT-CONNECTED" in ev:
+        raise Exception("Unexpected connection")
+    if "reason=15" not in ev:
+        raise Exception("Unexpected disconnection reason: " + ev)
+
+    ev = hapd.wait_event(["OCV-FAILURE"], timeout=1)
+    if ev is None:
+        raise Exception("OCV failure for EAPOL-Key msg 2/4 not reported")
+    if "addr=" + dev[0].own_addr() not in ev:
+        raise Exception("Unexpected OCV failure addr: " + ev)
+    if "frame=eapol-key-m2" not in ev:
+        raise Exception("Unexpected OCV failure frame: " + ev)
+    if "error=primary channel mismatch" not in ev:
+        raise Exception("Unexpected OCV failure error: " + ev)
+
+def test_wpa2_ocv_sta_override_sa_query_req(dev, apdev):
+    """OCV on 2.4 GHz and STA override SA Query Request"""
+    params = {"channel": "1",
+              "ieee80211w": "2",
+              "ocv": "1"}
+    hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+    dev[0].connect(ssid, psk=passphrase, scan_freq="2412", ocv="1",
+                   ieee80211w="2")
+    hapd.wait_sta()
+    dev[0].set("oci_freq_override_saquery_req", "2462")
+    if "OK" not in dev[0].request("UNPROT_DEAUTH"):
+        raise Exception("Triggering SA Query from the STA failed")
+    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=3)
+    if ev is None:
+        raise Exception("Disconnection after failed SA Query not reported")
+    dev[0].set("oci_freq_override_saquery_req", "0")
+    dev[0].wait_connected()
+    if "OK" not in dev[0].request("UNPROT_DEAUTH"):
+        raise Exception("Triggering SA Query from the STA failed")
+    ev = hapd.wait_event(["OCV-FAILURE"], timeout=3)
+    if ev is None:
+        raise Exception("OCV failure for SA Query Request not reported")
+    if "addr=" + dev[0].own_addr() not in ev:
+        raise Exception("Unexpected OCV failure addr: " + ev)
+    if "frame=saqueryreq" not in ev:
+        raise Exception("Unexpected OCV failure frame: " + ev)
+    if "error=primary channel mismatch" not in ev:
+        raise Exception("Unexpected OCV failure error: " + ev)
+    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=3)
+    if ev is not None:
+        raise Exception("SA Query from the STA failed")
+
+def test_wpa2_ocv_sta_override_sa_query_resp(dev, apdev):
+    """OCV on 2.4 GHz and STA override SA Query Response"""
+    params = {"channel": "1",
+              "ieee80211w": "2",
+              "ocv": "1"}
+    hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+    dev[0].connect(ssid, psk=passphrase, scan_freq="2412", ocv="1",
+                   ieee80211w="2")
+    dev[0].set("oci_freq_override_saquery_resp", "2462")
+    hapd.wait_sta()
+    if "OK" not in hapd.request("SA_QUERY " + dev[0].own_addr()):
+        raise Exception("SA_QUERY failed")
+    ev = hapd.wait_event(["OCV-FAILURE"], timeout=3)
+    if ev is None:
+        raise Exception("OCV failure for SA Query Response not reported")
+    if "addr=" + dev[0].own_addr() not in ev:
+        raise Exception("Unexpected OCV failure addr: " + ev)
+    if "frame=saqueryresp" not in ev:
+        raise Exception("Unexpected OCV failure frame: " + ev)
+    if "error=primary channel mismatch" not in ev:
+        if "error=did not receive mandatory OCI" in ev:
+            # This is not correct, but do not report this as test failure for
+            # now since the issue seems to be in mac80211 not allowing
+            # wpa_supplicant to process the SA Query Request frame.
+            logger.info("Unexpected OCV failure error: " + ev)
+        else:
+            raise Exception("Unexpected OCV failure error: " + ev)