arm64: dts: rockchip: Add OneThing Edge Cube series

The OneThing Edge Cube (OEC) series features the RK3566 SoC, 8GB
eMMC storage, and supports one SATA interface, one Gigabit Ethernet
port, and one USB 3.0 port.

Other than the difference in RAM capacity, the OEC and OEC-turbo are
identical in all other specifications.

  Specification:
    - Rockchip RK3566
    - LPDDR4X 2GB (OEC) / 4GB (OEC-turbo)
    - eMMC 8GB
    - Gigabit Ethernet port x 1
    - USB 3.0 port x 1
    - USB-C 2.0 port x 1
    - 12V DC Power supply
    - SATA 3.0 connector x 1

These devices do not have a PMIC, and their hardware circuit design
is highly similar to that of the rk3566-box-demo[1]. Hardware schematics
are not available at this time, with the vendor firmware dts available
for reference[2].

Ethernet, USB 3.0 and SATA 3.0 ports tested, all working well.

[1] https://elixir.bootlin.com/linux/v6.18.6/source/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
[2] https://archive.org/download/wxy-oec-RK3566-4G-dump/wxy-oec-RK3566-4G-dump.dts

Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260214021719.620752-4-jerrysteve1101@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 4d384f153c134c932b23983ff2736c0040b08273..71a7ab8e7223be194742f0c79e165710b31b092b 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-odroid-m1s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-onething-edge-cube.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v2.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-onething-edge-cube.dts b/arch/arm64/boot/dts/rockchip/rk3566-onething-edge-cube.dts
new file mode 100644 (file)
index 0000000..b57bf7b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-onething-edge-cube.dts
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3566.dtsi"
+
+/ {
+       model = "OneThing Edge Cube (OEC)/OEC Turbo";
+       compatible = "onething,edge-cube", "rockchip,rk3566";
+
+       aliases {
+               ethernet0 = &gmac1;
+               mmc0 = &sdhci;
+       };
+
+       chosen: chosen {
+               stdout-path = "serial2:1500000n8";
+       };
+
+       gmac1_clkin: external-gmac1-clock {
+               compatible = "fixed-clock";
+               clock-frequency = <125000000>;
+               clock-output-names = "gmac1_clkin";
+               #clock-cells = <0>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               rgb_led_b: led-0 {
+                       color = <LED_COLOR_ID_BLUE>;
+                       default-state = "off";
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&rgb_led_b_enable_l>;
+               };
+
+               rgb_led_g: led-1 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       default-state = "on";
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&rgb_led_g_enable_l>;
+               };
+
+               rgb_led_r: led-2 {
+                       color = <LED_COLOR_ID_RED>;
+                       default-state = "off";
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&rgb_led_r_enable_l>;
+               };
+       };
+
+       vcc_1v8: regulator-vcc-1v8 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_1v8";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       vcc_3v3: regulator-vcc-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_3v3";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       vcc12v0_dcin: regulator-vcc12v0-dcin {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc12v0_dcin";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <12000000>;
+               regulator-max-microvolt = <12000000>;
+       };
+
+       vcc3v3_sys: regulator-vcc3v3-sys {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3_sys";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&vcc12v0_dcin>;
+       };
+
+       vcc5v0_sys: regulator-vcc5v0-sys {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc5v0_sys";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&vcc12v0_dcin>;
+       };
+
+       vcc5v0_usb_host: regulator-vcc5v0-usb-host {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vcc5v0_usb_host_en>;
+               regulator-name = "vcc5v0_usb_host";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       vdd_cpu: regulator-vdd-cpu {
+               compatible = "pwm-regulator";
+               pwms = <&pwm0 0 5000 PWM_POLARITY_INVERTED>;
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-name = "vdd_cpu";
+               regulator-min-microvolt = <800000>;
+               regulator-max-microvolt = <1200000>;
+               regulator-settling-time-up-us = <250>;
+               pwm-supply = <&vcc5v0_sys>;
+       };
+
+       vdd_fixed: regulator-vdd-fixed {
+               compatible = "regulator-fixed";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-name = "vdd_fixed";
+               regulator-min-microvolt = <950000>;
+               regulator-max-microvolt = <950000>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       vdd_logic: regulator-vdd-logic {
+               compatible = "pwm-regulator";
+               pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+               regulator-name = "vdd_logic";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <800000>;
+               regulator-max-microvolt = <1100000>;
+               regulator-settling-time-up-us = <250>;
+               pwm-supply = <&vcc5v0_sys>;
+       };
+};
+
+
+/* No hardware video output port */
+&display_subsystem {
+       status = "disabled";
+};
+
+&combphy1 {
+       status = "okay";
+};
+
+&combphy2 {
+       status = "okay";
+};
+
+&cpu0 {
+       cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+       cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+       cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+       cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+       assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+       assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+       clock_in_out = "input";
+       phy-handle = <&rgmii_phy1>;
+       phy-mode = "rgmii-id";
+       pinctrl-names = "default";
+       pinctrl-0 = <&gmac1m1_miim
+                   &gmac1m1_tx_bus2
+                   &gmac1m1_rx_bus2
+                   &gmac1m1_rgmii_clk
+                   &gmac1m1_rgmii_bus
+                   &gmac1m1_clkinout>;
+       status = "okay";
+};
+
+&gpu {
+       status = "okay";
+};
+
+&mdio1 {
+       rgmii_phy1: ethernet-phy@1 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <0x1>;
+               reset-assert-us = <20000>;
+               reset-deassert-us = <100000>;
+               reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&pinctrl {
+       gmac {
+               eth_phy_reset_pin: eth-phy-reset-pin {
+                       rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       leds {
+               rgb_led_b_enable_l: rgb-led-b-enable-l {
+                       rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               rgb_led_g_enable_l: rgb-led-g-enable-l {
+                       rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               rgb_led_r_enable_l: rgb-led-r-enable-l {
+                       rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       usb {
+               vcc5v0_usb_host_en: vcc5v0-usb-host-en {
+                       rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
+&pmu_io_domains {
+       pmuio1-supply = <&vcc_3v3>;
+       pmuio2-supply = <&vcc_3v3>;
+       vccio1-supply = <&vcc_1v8>;
+       vccio3-supply = <&vcc_3v3>;
+       vccio4-supply = <&vcc_1v8>;
+       vccio5-supply = <&vcc_3v3>;
+       vccio6-supply = <&vcc_1v8>;
+       vccio7-supply = <&vcc_3v3>;
+       status = "okay";
+};
+
+&pwm0 {
+       status = "okay";
+};
+
+&pwm1 {
+       status = "okay";
+};
+
+&saradc {
+       vref-supply = <&vcc_1v8>;
+       status = "okay";
+};
+
+&sata2 {
+       status = "okay";
+};
+
+&sdhci {
+       bus-width = <8>;
+       cap-mmc-highspeed;
+       mmc-hs200-1_8v;
+       no-sd;
+       no-sdio;
+       non-removable;
+       pinctrl-names = "default";
+       pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+       status = "okay";
+};
+
+&tsadc {
+       rockchip,hw-tshut-mode = <1>;
+       rockchip,hw-tshut-polarity = <0>;
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&usb_host0_ehci {
+       status = "okay";
+};
+
+&usb_host0_ohci {
+       status = "okay";
+};
+
+&usb_host1_ehci {
+       status = "okay";
+};
+
+&usb_host1_ohci {
+       status = "okay";
+};
+
+&usb_host1_xhci  {
+       status = "okay";
+};
+
+&usb2phy0 {
+       status = "okay";
+};
+
+&usb2phy0_host {
+       phy-supply = <&vcc5v0_usb_host>;
+       status = "okay";
+};
+
+&usb2phy0_otg {
+       status = "okay";
+};
+
+&usb2phy1 {
+       status = "okay";
+};
+
+&usb2phy1_host {
+       phy-supply = <&vcc5v0_usb_host>;
+       status = "okay";
+};
+
+&usb2phy1_otg {
+       phy-supply = <&vcc5v0_usb_host>;
+       status = "okay";
+};