gpio: gpio-ltc4283: Add support for the LTC4283 Swap Controller

The LTC4283 device has up to 8 pins that can be configured as GPIOs.

Note that PGIO pins are not set as GPIOs by default so if they are
configured to be used as GPIOs we need to make sure to initialize them
to a sane default. They are set as inputs by default.

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260502-ltc4283-support-v13-3-1c206542e652@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/MAINTAINERS b/MAINTAINERS
index b55a902181cdda47a71d5dd821037f11b70de30d..3b9d66ce05d089d46d1179f6c32e8ecfb4786a90 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15254,9 +15254,11 @@ F:     drivers/hwmon/ltc4282.c
 
 LTC4283 HARDWARE MONITOR AND GPIO DRIVER
 M:     Nuno Sá <nuno.sa@analog.com>
+L:     linux-gpio@vger.kernel.org
 L:     linux-hwmon@vger.kernel.org
 S:     Supported
 F:     Documentation/devicetree/bindings/hwmon/adi,ltc4283.yaml
+F:     drivers/gpio/gpio-ltc4283.c
 F:     drivers/hwmon/ltc4283.c
 
 LTC4286 HARDWARE MONITOR DRIVER

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 020e51e30317a8574638bbe31365a3cf49591641..9b6e0a34eff609bca522dd7bd6b932ddfaf4ac45 100644 (file)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1783,6 +1783,21 @@ config GPIO_WM8994
 
 endmenu
 
+menu "Auxiliary Bus GPIO drivers"
+       depends on AUXILIARY_BUS
+
+config GPIO_LTC4283
+       tristate "Analog Devices LTC4283 GPIO support"
+       depends on SENSORS_LTC4283
+       help
+         If you say yes here you want the GPIO function available in Analog
+         Devices LTC4283 Negative Voltage Hot Swap Controller.
+
+         This driver can also be built as a module. If so, the module will
+         be called gpio-ltc4283.
+
+endmenu
+
 menu "PCI GPIO expanders"
        depends on PCI
 

diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index b267598b517de089cf6339d837264f1d09e275c0..6e2367cab94fb2c02c10c512cc28d79ef48a7659 100644 (file)
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_GPIO_LP873X)           += gpio-lp873x.o
 obj-$(CONFIG_GPIO_LP87565)             += gpio-lp87565.o
 obj-$(CONFIG_GPIO_LPC18XX)             += gpio-lpc18xx.o
 obj-$(CONFIG_GPIO_LPC32XX)             += gpio-lpc32xx.o
+obj-$(CONFIG_GPIO_LTC4283)             += gpio-ltc4283.o
 obj-$(CONFIG_GPIO_MACSMC)              += gpio-macsmc.o
 obj-$(CONFIG_GPIO_MADERA)              += gpio-madera.o
 obj-$(CONFIG_GPIO_MAX3191X)            += gpio-max3191x.o

diff --git a/drivers/gpio/gpio-ltc4283.c b/drivers/gpio/gpio-ltc4283.c
new file mode 100644 (file)
index 0000000..6609443
--- /dev/null
+++ b/drivers/gpio/gpio-ltc4283.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices LTC4283 GPIO driver
+ *
+ * Copyright 2025 Analog Devices Inc.
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define LTC4283_PINS_MAX                       8
+#define LTC4283_PGIOX_START_NR                 4
+#define LTC4283_INPUT_STATUS                   0x02
+#define LTC4283_PGIO_CONFIG                    0x10
+#define   LTC4283_PGIO_CFG_MASK(pin) \
+       GENMASK(((pin) - LTC4283_PGIOX_START_NR) * 2 + 1, (((pin) - LTC4283_PGIOX_START_NR) * 2))
+#define LTC4283_PGIO_CONFIG_2                  0x11
+
+#define LTC4283_ADIO_CONFIG                    0x12
+/* starts at bit 4 */
+#define   LTC4283_ADIOX_CONFIG_MASK(pin)       BIT((pin) + 4)
+#define LTC4283_PGIO_DIR_IN                    3
+#define LTC4283_PGIO_DIR_OUT                   2
+
+struct ltc4283_gpio {
+       struct gpio_chip gpio_chip;
+       struct regmap *regmap;
+};
+
+static int ltc4283_pgio_get_direction(const struct ltc4283_gpio *st, unsigned int off)
+{
+       unsigned int val;
+       int ret;
+
+       ret = regmap_read(st->regmap, LTC4283_PGIO_CONFIG, &val);
+       if (ret)
+               return ret;
+
+       val = field_get(LTC4283_PGIO_CFG_MASK(off), val);
+       if (val == LTC4283_PGIO_DIR_IN)
+               return GPIO_LINE_DIRECTION_IN;
+
+       return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int ltc4283_gpio_get_direction(struct gpio_chip *gc, unsigned int off)
+{
+       struct ltc4283_gpio *st = gpiochip_get_data(gc);
+       unsigned int val;
+       int ret;
+
+       if (off >= LTC4283_PGIOX_START_NR)
+               return ltc4283_pgio_get_direction(st, off);
+
+       ret = regmap_read(st->regmap, LTC4283_ADIO_CONFIG, &val);
+       if (ret)
+               return ret;
+
+       if (val & LTC4283_ADIOX_CONFIG_MASK(off))
+               return GPIO_LINE_DIRECTION_IN;
+
+       return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int ltc4283_gpio_direction_set(const struct ltc4283_gpio *st,
+                                     unsigned int off, bool input)
+{
+       if (off >= LTC4283_PGIOX_START_NR) {
+               unsigned int val = LTC4283_PGIO_DIR_OUT;
+
+               if (input)
+                       val = LTC4283_PGIO_DIR_IN;
+
+               val = field_prep(LTC4283_PGIO_CFG_MASK(off), val);
+               return regmap_update_bits(st->regmap, LTC4283_PGIO_CONFIG,
+                                         LTC4283_PGIO_CFG_MASK(off), val);
+       }
+
+       return regmap_update_bits(st->regmap, LTC4283_ADIO_CONFIG,
+                                 LTC4283_ADIOX_CONFIG_MASK(off),
+                                 field_prep(LTC4283_ADIOX_CONFIG_MASK(off), input));
+}
+
+static int __ltc4283_gpio_set_value(const struct ltc4283_gpio *st,
+                                   unsigned int off, int val)
+{
+       u32 reg = off < LTC4283_PGIOX_START_NR ? LTC4283_ADIO_CONFIG : LTC4283_PGIO_CONFIG_2;
+
+       return regmap_update_bits(st->regmap, reg, BIT(off),
+                                 field_prep(BIT(off), !!val));
+}
+
+static int ltc4283_gpio_direction_input(struct gpio_chip *gc, unsigned int off)
+{
+       struct ltc4283_gpio *st = gpiochip_get_data(gc);
+
+       return ltc4283_gpio_direction_set(st, off, true);
+}
+
+static int ltc4283_gpio_direction_output(struct gpio_chip *gc, unsigned int off, int val)
+{
+       struct ltc4283_gpio *st = gpiochip_get_data(gc);
+       int ret;
+
+       ret = ltc4283_gpio_direction_set(st, off, false);
+       if (ret)
+               return ret;
+
+       return __ltc4283_gpio_set_value(st, off, val);
+}
+
+static int ltc4283_gpio_get_value(struct gpio_chip *gc, unsigned int off)
+{
+       struct ltc4283_gpio *st = gpiochip_get_data(gc);
+       unsigned int val, reg;
+       int ret, dir;
+
+       dir = ltc4283_gpio_get_direction(gc, off);
+       if (dir < 0)
+               return dir;
+
+       if (dir == GPIO_LINE_DIRECTION_IN) {
+               ret = regmap_read(st->regmap, LTC4283_INPUT_STATUS, &val);
+               if (ret)
+                       return ret;
+
+               /* ADIO1 is at bit 3. */
+               if (off < LTC4283_PGIOX_START_NR)
+                       return !!(val & BIT(3 - off));
+
+               /* PGIO1 is at bit 7. */
+               return !!(val & BIT(7 - (off - LTC4283_PGIOX_START_NR)));
+       }
+
+       if (off < LTC4283_PGIOX_START_NR)
+               reg = LTC4283_ADIO_CONFIG;
+       else
+               reg = LTC4283_PGIO_CONFIG_2;
+
+       ret = regmap_read(st->regmap, reg, &val);
+       if (ret)
+               return ret;
+
+       return !!(val & BIT(off));
+}
+
+static int ltc4283_gpio_set_value(struct gpio_chip *gc, unsigned int off, int val)
+{
+       struct ltc4283_gpio *st = gpiochip_get_data(gc);
+
+       return __ltc4283_gpio_set_value(st, off, val);
+}
+
+static int ltc4283_init_valid_mask(struct gpio_chip *gc, unsigned long *valid_mask,
+                                  unsigned int ngpios)
+{
+       unsigned long *mask = dev_get_platdata(gc->parent);
+
+       bitmap_copy(valid_mask, mask, ngpios);
+       return 0;
+}
+
+static int ltc4283_gpio_probe(struct auxiliary_device *adev,
+                             const struct auxiliary_device_id *id)
+{
+       struct device *dev = &adev->dev;
+       struct ltc4283_gpio *st;
+       struct gpio_chip *gc;
+
+       st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+       if (!st)
+               return -ENOMEM;
+
+       st->regmap = dev_get_regmap(dev->parent, NULL);
+       if (!st->regmap)
+               return dev_err_probe(dev, -ENODEV,
+                                    "Failed to get regmap\n");
+
+       gc = &st->gpio_chip;
+       gc->parent = dev;
+       gc->get_direction = ltc4283_gpio_get_direction;
+       gc->direction_input = ltc4283_gpio_direction_input;
+       gc->direction_output = ltc4283_gpio_direction_output;
+       gc->get = ltc4283_gpio_get_value;
+       gc->set = ltc4283_gpio_set_value;
+       gc->init_valid_mask = ltc4283_init_valid_mask;
+       gc->can_sleep = true;
+
+       gc->base = -1;
+       gc->ngpio = LTC4283_PINS_MAX;
+       gc->label = adev->name;
+       gc->owner = THIS_MODULE;
+
+       return devm_gpiochip_add_data(dev, &st->gpio_chip, st);
+}
+
+static const struct auxiliary_device_id ltc4283_aux_id_table[] = {
+       { "ltc4283.gpio" },
+       { }
+};
+MODULE_DEVICE_TABLE(auxiliary, ltc4283_aux_id_table);
+
+static struct auxiliary_driver ltc4283_gpio_driver = {
+       .probe = ltc4283_gpio_probe,
+       .id_table = ltc4283_aux_id_table,
+};
+module_auxiliary_driver(ltc4283_gpio_driver);
+
+MODULE_AUTHOR("Nuno Sá <nuno.sa@analog.com>");
+MODULE_DESCRIPTION("GPIO LTC4283 Driver");
+MODULE_LICENSE("GPL");