Add QCA vendor sub-command and attribute for spectral scan completion

Add a new QCA vendor sub-command
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_COMPLETE which will be used as a
netlink event to indicate the completion of a spectral scan request.
This event can also be sent incase of the spectral scan request timeout.

To be able to configure the timeout the value, add a new vendor
attribute QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETION_TIMEOUT in
enum qca_wlan_vendor_attr_spectral_scan.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>

diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index 05fe0983785e0efa1bee04f82093f0d419bb473a..09c8b2434da5f82dcb1ee3df87f1cd8b5f9ac883 100644 (file)
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -1053,6 +1053,10 @@ enum qca_radiotap_vendor_ids {
  *     adjust transmit power. The attributes used with this subcommand are
  *     defined in enum qca_wlan_vendor_attr_adjust_tx_power.
  *
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_COMPLETE: Event indication from the
+ *     driver to notify user application about the spectral scan completion.
+ *     The attributes used with this subcommand are defined in
+ *     enum qca_wlan_vendor_attr_spectral_scan_complete.
  */
 enum qca_nl80211_vendor_subcmds {
        QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -1278,6 +1282,7 @@ enum qca_nl80211_vendor_subcmds {
        QCA_NL80211_VENDOR_SUBCMD_FLOW_POLICY = 239,
        QCA_NL80211_VENDOR_SUBCMD_DISASSOC_PEER = 240,
        QCA_NL80211_VENDOR_SUBCMD_ADJUST_TX_POWER = 241,
+       QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_COMPLETE = 242,
 };
 
 /* Compatibility defines for previously used subcmd names.
@@ -7769,6 +7774,14 @@ enum qca_wlan_vendor_attr_spectral_scan {
         * the driver should configure the default transport mode to netlink.
         */
        QCA_WLAN_VENDOR_ATTR_SPECTRAL_DATA_TRANSPORT_MODE = 33,
+       /* Spectral scan completion timeout. u32 attribute. This
+        * attribute is used to configure a timeout value (in us). The
+        * timeout value would be from the beginning of a spectral
+        * scan. This is an optional attribute. If this attribute is
+        * not populated, the driver would internally derive the
+        * timeout value.
+        */
+       QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETION_TIMEOUT = 34,
 
        QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST,
        QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_MAX =
@@ -16971,4 +16984,43 @@ enum qca_wlan_vendor_spectral_data_transport_mode {
        QCA_WLAN_VENDOR_SPECTRAL_DATA_TRANSPORT_RELAY = 1,
 };
 
+/* enum qca_wlan_vendor_spectral_scan_complete_status - Attribute
+ * values for QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETE_STATUS to
+ * indicate the completion status for a spectral scan.
+ *
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_COMPLETE_STATUS_SUCCESSFUL:
+ * Indicates a successful completion of the scan.
+ *
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_COMPLETE_STATUS_TIMEOUT: Indicates
+ * a timeout has occured while processing the spectral reports.
+ */
+enum qca_wlan_vendor_spectral_scan_complete_status {
+       QCA_WLAN_VENDOR_SPECTRAL_SCAN_COMPLETE_STATUS_SUCCESSFUL = 0,
+       QCA_WLAN_VENDOR_SPECTRAL_SCAN_COMPLETE_STATUS_TIMEOUT = 1,
+};
+
+/* enum qca_wlan_vendor_attr_spectral_scan_complete - Definition of
+ * attributes for @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_COMPLETE
+ * to indicate scan status and samples received from hardware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETE_INVALID: Invalid attribute
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETE_STATUS: u32 attribute.
+ * Indicates completion status, either the scan is successful or a timeout
+ * is issued by the driver.
+ * See enum qca_wlan_vendor_spectral_scan_complete_status.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETE_RECEIVED_SAMPLES: u32
+ * attribute. Number of spectral samples received after the scan has started.
+ */
+enum qca_wlan_vendor_attr_spectral_scan_complete {
+       QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETE_INVALID = 0,
+       QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETE_STATUS = 1,
+       QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETE_RECEIVED_SAMPLES = 2,
+
+       QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETE_AFTER_LAST,
+       QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETE_MAX =
+       QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETE_AFTER_LAST - 1,
+};
+
 #endif /* QCA_VENDOR_H */