---
NTP 4.2.8p4
-Focus: XXX
+Focus: Security, Bug fies, enhancements.
-Severity: MEDIUM
+Severity: HIGH
+
+In addition to bug fixes and enhancements, this release fixes the
+following 13 low-, medium-, and high-severity vulnerabilities:
+
+* Incomplete vallen (value length) checks in ntp_crypto.c, leading
+ to potential crashes or potential code injection/information leakage.
+
+ References: Sec 2899, Sec 2671, CVE-2015-
+ Affects: All ntp-4 releases up to, but not including 4.2.8p4,
+ and 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:H/Au:M/C:N/I:N/A:C) Base Score: 4.6
+ Summary: The fix for CVE-2014-9750 was incomplete in that there were
+ certain code paths where a packet with particular autokey operations
+ that contained malicious data was not always being completely
+ validated. Receipt of these packets can cause ntpd to crash.
+ Mitigation:
+ Don't use autokey.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page
+ Monitor your ntpd instances.
+ Credit: This weakness was discovered by Tenable Network Security.
+
+* Clients that receive a KoD should validate the origin timestamp field.
+
+ References: Sec 2901 / CVE-2015-
+ Affects: All ntp-4 releases up to, but not including 4.2.8p4,
+ and 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:M/Au:N/C:N/I:N/A:P) Base Score: 4.3-5.0 at worst
+ Summary: An ntpd client that honors Kiss-of-Death responses will honor
+ KoD messages that have been forged by an attacker, causing it to
+ delay or stop querying its servers for time updates. Also, an
+ attacker can forge packets that claim to be from the target and
+ send them to servers often enough that a server that implements
+ KoD rate limiting will send the target machine a KoD response to
+ attempt to reduce the rate of incoming packets, or it may also
+ trigger a firewall block at the server for packets from the target
+ machine. For either of these attacks to succeed, the attacker must
+ know what servers the target is communicating with. An attacker
+ can be anywhere on the Internet and can frequently learn the
+ identity of the target's time source by sending the target a
+ time query.
+ Mitigation:
+ Implement BCP-38.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download Page
+ or the NTP Public Services Project Download Page
+ If you can't upgrade, restrict who can query ntpd to learn who
+ its servers are, and what IPs are allowed to ask your system
+ for the time. This mitigation is heavy-handed.
+ Monitor your ntpd instances.
+ Note:
+ 4.2.8p4 protects against the first attack. For the second attack,
+ all we can do is warn when it is happening, which we do in 4.2.8p4.
+ Credit: This weakness was discovered by Aanchal Malhotra,
+ Issac E. Cohen, and Sharon Goldberg of Boston University.
+
+* configuration directives to change "pidfile" and "driftfile" should
+ only be allowed locally.
+
+ References: Sec 2902 / CVE-2015-5196
+ Affects: All ntp-4 releases up to, but not including 4.2.8p4,
+ and 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:H/Au:M/C:N/I:C/A:C) Base Score: 6.2 worst case
+ Summary: If ntpd is configured to allow for remote configuration,
+ and if the (possibly spoofed) source IP address is allowed to
+ send remote configuration requests, and if the attacker knows
+ the remote configuration password, it's possible for an attacker
+ to use the "pidfile" or "driftfile" directives to potentially
+ overwrite other files.
+ Mitigation:
+ Implement BCP-38.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page
+ If you cannot upgrade, don't enable remote configuration.
+ If you must enable remote configuration and cannot upgrade,
+ remote configuration of NTF's ntpd requires:
+ - an explicitly configured trustedkey, and you should also
+ configure a controlkey.
+ - access from a permitted IP. You choose the IPs.
+ - authentication. Don't disable it. Practice secure key safety.
+ Monitor your ntpd instances.
+ Credit: This weakness was discovered by Miroslav Lichvar of Red Hat.
+
+* Slow memory leak in CRYPTO_ASSOC
+
+ References: Sec 2909 / CVE-2015-7701
+ Affects: All ntp-4 releases that use autokey up to, but not
+ including 4.2.8p4, and 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:H/Au:M/C:N/I:N/A:C) Base Score: 0.0 best/usual case,
+ 4.6 otherwise
+ Summary: If ntpd is configured to use autokey, then an attacker can
+ send packets to ntpd that will, after several days of ongoing
+ attack, cause it to run out of memory.
+ Mitigation:
+ Don't use autokey.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page
+ Monitor your ntpd instances.
+ Credit: This weakness was discovered by Tenable Network Security.
+
+* mode 7 loop counter underrun
+
+ References: Sec 2913 / CVE-2015-7848 / TALOS-CAN-0052
+ Affects: All ntp-4 releases up to, but not including 4.2.8p4,
+ and 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:H/Au:M/C:N/I:N/A:C) Base Score: 4.6
+ Summary: If ntpd is configured to enable mode 7 packets, and if the
+ use of mode 7 packets is not properly protected thru the use of
+ the available mode 7 authentication and restriction mechanisms,
+ and if the (possibly spoofed) source IP address is allowed to
+ send mode 7 queries, then an attacker can send a crafted packet
+ to ntpd that will cause it to crash.
+ Mitigation:
+ Implement BCP-38.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page.
+ If you are unable to upgrade:
+ In ntp-4.2.8, mode 7 is disabled by default. Don't enable it.
+ If you must enable mode 7:
+ configure the use of a requestkey to control who can issue
+ mode 7 requests.
+ configure restrict noquery to further limit mode 7 requests
+ to trusted sources.
+ Monitor your ntpd instances.
+Credit: This weakness was discovered by Aleksandar Nikolic of Cisco Talos.
+
+* memory corruption in password store
+
+ References: Sec 2916 / CVE-2015-7849 / TALOS-CAN-0054
+ Affects: All ntp-4 releases up to, but not including 4.2.8p4, and 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:H/Au:M/C:N/I:C/A:C) Base Score: 6.8, worst case
+ Summary: If ntpd is configured to allow remote configuration, and if
+ the (possibly spoofed) source IP address is allowed to send
+ remote configuration requests, and if the attacker knows the
+ remote configuration password or if ntpd was configured to
+ disable authentication, then an attacker can send a set of
+ packets to ntpd that may cause a crash or theoretically
+ perform a code injection attack.
+ Mitigation:
+ Implement BCP-38.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page.
+ If you are unable to upgrade, remote configuration of NTF's
+ ntpd requires:
+ an explicitly configured "trusted" key. Only configure
+ this if you need it.
+ access from a permitted IP address. You choose the IPs.
+ authentication. Don't disable it. Practice secure key safety.
+ Monitor your ntpd instances.
+ Credit: This weakness was discovered by Yves Younan of Cisco Talos.
+
+* Infinite loop if extended logging enabled and the logfile and
+ keyfile are the same.
+
+ References: Sec 2917 / CVE-2015-7850 / TALOS-CAN-0055
+ Affects: All ntp-4 releases up to, but not including 4.2.8p4,
+ and 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:H/Au:M/C:N/I:N/A:C) Base Score: 4.6, worst case
+ Summary: If ntpd is configured to allow remote configuration, and if
+ the (possibly spoofed) source IP address is allowed to send
+ remote configuration requests, and if the attacker knows the
+ remote configuration password or if ntpd was configured to
+ disable authentication, then an attacker can send a set of
+ packets to ntpd that will cause it to crash and/or create a
+ potentially huge log file. Specifically, the attacker could
+ enable extended logging, point the key file at the log file,
+ and cause what amounts to an infinite loop.
+ Mitigation:
+ Implement BCP-38.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page.
+ If you are unable to upgrade, remote configuration of NTF's ntpd
+ requires:
+ an explicitly configured "trusted" key. Only configure this
+ if you need it.
+ access from a permitted IP address. You choose the IPs.
+ authentication. Don't disable it. Practice secure key safety.
+ Monitor your ntpd instances.
+ Credit: This weakness was discovered by Yves Younan of Cisco Talos.
+
+* Potential path traversal vulnerability in the config file saving of
+ ntpd on VMS.
+
+ References: Sec 2918 / CVE-2015-7851 / TALOS-CAN-0062
+ Affects: All ntp-4 releases running under VMS up to, but not
+ including 4.2.8p4, and 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:H/Au:M/C:N/I:P/A:C) Base Score: 5.2, worst case
+ Summary: If ntpd is configured to allow remote configuration, and if
+ the (possibly spoofed) IP address is allowed to send remote
+ configuration requests, and if the attacker knows the remote
+ configuration password or if ntpd was configured to disable
+ authentication, then an attacker can send a set of packets to
+ ntpd that may cause ntpd to overwrite files.
+ Mitigation:
+ Implement BCP-38.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page.
+ If you are unable to upgrade, remote configuration of NTF's ntpd
+ requires:
+ an explicitly configured "trusted" key. Only configure
+ this if you need it.
+ access from permitted IP addresses. You choose the IPs.
+ authentication. Don't disable it. Practice key security safety.
+ Monitor your ntpd instances.
+ Credit: This weakness was discovered by Yves Younan of Cisco Talos.
+
+* ntpq atoascii() potential memory corruption
+
+ References: Sec 2919 / CVE-2015-7852 / TALOS-CAN-0063
+ Affects: All ntp-4 releases running up to, but not including 4.2.8p4,
+ and 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:H/Au:N/C:N/I:P/A:P) Base Score: 4.0, worst case
+ Summary: If an attacker can figure out the precise moment that ntpq
+ is listening for data and the port number it is listening on or
+ if the attacker can provide a malicious instance ntpd that
+ victims will connect to then an attacker can send a set of
+ crafted mode 6 response packets that, if received by ntpq,
+ can cause ntpq to crash.
+ Mitigation:
+ Implement BCP-38.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page.
+ If you are unable to upgrade and you run ntpq against a server
+ and ntpq crashes, try again using raw mode. Build or get a
+ patched ntpq and see if that fixes the problem. Report new
+ bugs in ntpq or abusive servers appropriately.
+ If you use ntpq in scripts, make sure ntpq does what you expect
+ in your scripts.
+ Credit: This weakness was discovered by Yves Younan and
+ Aleksander Nikolich of Cisco Talos.
+
+* Invalid length data provided by a custom refclock driver could cause
+ a buffer overflow.
+
+ References: Sec 2920 / CVE-2015-7853 / TALOS-CAN-0064
+ Affects: Potentially all ntp-4 releases running up to, but not
+ including 4.2.8p4, and 4.3.0 up to, but not including 4.3.XX
+ that have custom refclocks
+ CVSS: (AV:L/AC:H/Au:M/C:C/I:C/A:C) Base Score: 0.0 usual case,
+ 5.9 unusual worst case
+ Summary: A negative value for the datalen parameter will overflow a
+ data buffer. NTF's ntpd driver implementations always set this
+ value to 0 and are therefore not vulnerable to this weakness.
+ If you are running a custom refclock driver in ntpd and that
+ driver supplies a negative value for datalen (no custom driver
+ of even minimal competence would do this) then ntpd would
+ overflow a data buffer. It is even hypothetically possible
+ in this case that instead of simply crashing ntpd the attacker
+ could effect a code injection attack.
+ Mitigation:
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page.
+ If you are unable to upgrade:
+ If you are running custom refclock drivers, make sure
+ the signed datalen value is either zero or positive.
+ Monitor your ntpd instances.
+ Credit: This weakness was discovered by Yves Younan of Cisco Talos.
+
+* Password Length Memory Corruption Vulnerability
+
+ References: Sec 2921 / CVE-2015-7854 / TALOS-CAN-0065
+ Affects: All ntp-4 releases up to, but not including 4.2.8p4, and
+ 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:H/Au:M/C:C/I:C/A:C) Base Score: 0.0 best case,
+ 1.7 usual case, 6.8, worst case
+ Summary: If ntpd is configured to allow remote configuration, and if
+ the (possibly spoofed) source IP address is allowed to send
+ remote configuration requests, and if the attacker knows the
+ remote configuration password or if ntpd was (foolishly)
+ configured to disable authentication, then an attacker can
+ send a set of packets to ntpd that may cause it to crash,
+ with the hypothetical possibility of a small code injection.
+ Mitigation:
+ Implement BCP-38.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page.
+ If you are unable to upgrade, remote configuration of NTF's
+ ntpd requires:
+ an explicitly configured "trusted" key. Only configure
+ this if you need it.
+ access from a permitted IP address. You choose the IPs.
+ authentication. Don't disable it. Practice secure key safety.
+ Monitor your ntpd instances.
+ Credit: This weakness was discovered by Yves Younan and
+ Aleksander Nikolich of Cisco Talos.
+
+* decodenetnum() will ASSERT botch instead of returning FAIL on some
+ bogus values.
+
+ References: Sec 2922 / CVE-2015-7855
+ Affects: All ntp-4 releases up to, but not including 4.2.8p4, and
+ 4.3.0 up to, but not including 4.3.XX
+ CVSS: (AV:N/AC:H/Au:M/C:N/I:N/A:C) Base Score: 4.6, worst case
+ Summary: If ntpd is fed a crafted mode 6 or mode 7 packet containing
+ an unusually long data value where a network address is expected,
+ the decodenetnum() function will abort with an assertion failure
+ instead of simply returning a failure condition.
+ Mitigation:
+ Implement BCP-38.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page.
+ If you are unable to upgrade:
+ mode 7 is disabled by default. Don't enable it.
+ Use restrict noquery to limit who can send mode 6
+ and mode 7 requests.
+ Configure and use the controlkey and requestkey
+ authentication directives to limit who can
+ send mode 6 and mode 7 requests.
+ Monitor your ntpd instances.
+ Credit: This weakness was discovered by John D "Doug" Birdwell of IDA.org.
+
+* NAK to the Future: Symmetric association authentication bypass via
+ crypto-NAK.
+
+ References: Sec 2941 / CVE-2015-XXX
+ Affects: All ntp-4 releases between 4.2.5p186 up to but not including
+ 4.2.8p4, and 4.3.0 up to but not including 4.3.XX
+ CVSS: (AV:N/AC:L/Au:N/C:N/I:P/A:P) Base Score: 6.4
+ Summary: Crypto-NAK packets can be used to cause ntpd to accept time
+ from unauthenticated ephemeral symmetric peers by bypassing the
+ authentication required to mobilize peer associations. This
+ vulnerability appears to have been introduced in ntp-4.2.5p186
+ when the code handling mobilization of new passive symmetric
+ associations (lines 1103-1165) was refactored.
+ Mitigation:
+ Implement BCP-38.
+ Upgrade to 4.2.8p4, or later, from the NTP Project Download
+ Page or the NTP Public Services Project Download Page.
+ If you are unable to upgrade:
+ Apply the patch to the bottom of the "authentic" check
+ block around line 1136 of ntp_proto.c.
+ Monitor your ntpd instances.
+ Credit: This weakness was discovered by Stephen Gray <stepgray@cisco.com>.
Backward-Incompatible changes:
* [Bug 2817] Default on Linux is now "rlimit memlock -1".
- While the general default of 32M is still the case, under Linux
- the default value has been changed to -1 (do not lock ntpd into
+While the general default of 32M is still the case, under Linux
+the default value has been changed to -1 (do not lock ntpd into
memory). A value of 0 means "lock ntpd into memory with whatever
memory it needs." If your ntp.conf file has an explicit "rlimit memlock"
value in it, that value will continue to be used.
#
# EDIT THIS FILE WITH CAUTION (invoke-ntp.conf.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 06:06:51 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:24:27 AM by AutoGen 5.18.5
# From the definitions ntp.conf.def
# and the template file agtexi-file.tpl
@end ignore
#
# EDIT THIS FILE WITH CAUTION (invoke-ntp.keys.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 06:06:56 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:24:28 AM by AutoGen 5.18.5
# From the definitions ntp.keys.def
# and the template file agtexi-file.tpl
@end ignore
#
# EDIT THIS FILE WITH CAUTION (invoke-ntpd.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 06:07:00 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:24:30 AM by AutoGen 5.18.5
# From the definitions ntpd-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntpd - NTP daemon program - Ver. 4.2.8p4-RC1
+ntpd - NTP daemon program - Ver. 4.2.8p4-sec-RC2
Usage: ntpd [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... \
[ <server1> ... <serverN> ]
Flg Arg Option-Name Description
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp.conf 5man "06 Oct 2015" "4.2.8p4-RC1" "File Formats"
+.TH ntp.conf 5man "17 Oct 2015" "4.2.8p4-sec-RC2" "File Formats"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-1Va40z/ag-GWaWZz)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:06:17 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:31 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTP_CONF 5mdoc File Formats
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:07:05 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:18 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>NTP Configuration File User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="NTP Configuration File User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">NTP Configuration File User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#ntp_002econf-Description">ntp.conf Description</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002econf-Description">ntp.conf Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">NTP's Configuration File User Manual</h2>
<p>This document describes the configuration file for the NTP Project's
<code>ntpd</code> program.
- <p>This document applies to version 4.2.8p4-RC1 of <code>ntp.conf</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>ntp.conf</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
</ul>
<div class="node">
+<a name="ntp.conf-Description"></a>
+<a name="ntp_002econf-Description"></a>
<p><hr>
-
<a name="ntp_002econf-Description"></a>Previous: <a rel="previous" accesskey="p" href="#Top">Top</a>,
+Previous: <a rel="previous" accesskey="p" href="#Top">Top</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
by default <code>ntp.conf</code>.
<div class="node">
-<p><hr>
+<a name="ntp.conf-Notes"></a>
<a name="ntp_002econf-Notes"></a>
-<br>
+<p><hr>
+
+
</div>
<h3 class="section">Notes about ntp.conf</h3>
daemon in order to specify the synchronization sources,
modes and other related information.
Usually, it is installed in the
-<span class="file">/etc</span>
+<samp><span class="file">/etc</span></samp>
directory,
but could be installed elsewhere
(see the daemon's
<span class="sc">unix</span>
configuration files.
Comments begin with a
-#
+‘#’
character and extend to the end of the line;
blank lines are ignored.
Configuration commands consist of an initial keyword
page
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>)
+<samp><span class="file">/usr/share/doc/ntp</span></samp>)
contains an extended discussion of these options.
In addition to the discussion of general
<a href="#Configuration-Options">Configuration Options</a>,
<code>manycastclient</code>
commands.
<div class="node">
-<p><hr>
<a name="Configuration-Support"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">Configuration Support</h4>
In a few cases, including the reslist billboard generated
by ntpdc, IPv6 addresses are automatically generated.
IPv6 addresses can be identified by the presence of colons
-:
+“:”
in the address field.
IPv6 addresses can be used almost everywhere where
IPv4 addresses can be used,
page
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>).
+<samp><span class="file">/usr/share/doc/ntp</span></samp>).
<dl>
<dt><code>pool</code><dd>For type s addresses, this command mobilizes a persistent
client mode association with a number of remote servers.
page
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>)
+<samp><span class="file">/usr/share/doc/ntp</span></samp>)
for further information.
<br><dt><code>ttl</code> <kbd>ttl</kbd><dd>This option is used only with broadcast server and manycast
client modes.
is 5.
</dl>
<div class="node">
-<p><hr>
<a name="Authentication-Support"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">Authentication Support</h4>
Keys and
related information are specified in a key
file, usually called
-<span class="file">ntp.keys</span>,
+<samp><span class="file">ntp.keys</span></samp>,
which must be distributed and stored using
secure means beyond the scope of the NTP protocol itself.
Besides the keys used
in the
<code>keysdir</code>
command or default
-<span class="file">/usr/local/etc</span>.
+<samp><span class="file">/usr/local/etc</span></samp>.
Following are the subcommands:
<dl>
<dt><code>cert</code> <kbd>file</kbd><dd>Specifies the location of the required host public certificate file.
This overrides the link
-<span class="file">ntpkey_cert_</span><kbd>hostname</kbd>
+<samp><span class="file">ntpkey_cert_</span></samp><kbd>hostname</kbd>
in the keys directory.
<br><dt><code>gqpar</code> <kbd>file</kbd><dd>Specifies the location of the optional GQ parameters file.
This
overrides the link
-<span class="file">ntpkey_gq_</span><kbd>hostname</kbd>
+<samp><span class="file">ntpkey_gq_</span></samp><kbd>hostname</kbd>
in the keys directory.
<br><dt><code>host</code> <kbd>file</kbd><dd>Specifies the location of the required host key file.
This overrides
the link
-<span class="file">ntpkey_key_</span><kbd>hostname</kbd>
+<samp><span class="file">ntpkey_key_</span></samp><kbd>hostname</kbd>
in the keys directory.
<br><dt><code>iffpar</code> <kbd>file</kbd><dd>Specifies the location of the optional IFF parameters file.This
overrides the link
-<span class="file">ntpkey_iff_</span><kbd>hostname</kbd>
+<samp><span class="file">ntpkey_iff_</span></samp><kbd>hostname</kbd>
in the keys directory.
<br><dt><code>leap</code> <kbd>file</kbd><dd>Specifies the location of the optional leapsecond file.
This overrides the link
-<span class="file">ntpkey_leap</span>
+<samp><span class="file">ntpkey_leap</span></samp>
in the keys directory.
<br><dt><code>mvpar</code> <kbd>file</kbd><dd>Specifies the location of the optional MV parameters file.
This
overrides the link
-<span class="file">ntpkey_mv_</span><kbd>hostname</kbd>
+<samp><span class="file">ntpkey_mv_</span></samp><kbd>hostname</kbd>
in the keys directory.
<br><dt><code>pw</code> <kbd>password</kbd><dd>Specifies the password to decrypt files containing private keys and
identity parameters.
<br><dt><code>sign</code> <kbd>file</kbd><dd>Specifies the location of the optional sign key file.
This overrides
the link
-<span class="file">ntpkey_sign_</span><kbd>hostname</kbd>
+<samp><span class="file">ntpkey_sign_</span></samp><kbd>hostname</kbd>
in the keys directory.
If this file is
not found, the host key is also the sign key.
<br><dt><code>keysdir</code> <kbd>path</kbd><dd>This command specifies the default directory path for
cryptographic keys, parameters and certificates.
The default is
-<span class="file">/usr/local/etc/</span>.
+<samp><span class="file">/usr/local/etc/</span></samp>.
<br><dt><code>requestkey</code> <kbd>key</kbd><dd>Specifies the key identifier to use with the
<code>ntpdc(1ntpdcmdoc)</code>
utility program, which uses a
The identity key is missing, corrupt or bogus.
</dl>
<div class="node">
-<p><hr>
<a name="Monitoring-Support"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">Monitoring Support</h4>
supported.
Statistic files are managed using file generation sets
and scripts in the
-<span class="file">./scripts</span>
+<samp><span class="file">./scripts</span></samp>
directory of this distribution.
Using
these facilities and
received from a clock driver appends a line of the following form to
the file generation set named
<code>clockstats</code>:
-<pre class="verbatim">
- 49213 525.624 127.127.4.1 93 226 00:08:29.606 D
+<pre class="verbatim"> 49213 525.624 127.127.4.1 93 226 00:08:29.606 D
</pre>
<p>The first two fields show the date (Modified Julian Day) and time
Each message received by the protocol module appends a line of the
following form to the file generation set named
<code>cryptostats</code>:
-<pre class="verbatim">
- 49213 525.624 127.127.4.1 message
+<pre class="verbatim"> 49213 525.624 127.127.4.1 message
</pre>
<p>The first two fields show the date (Modified Julian Day) and time
update of the local clock outputs a line of the following form to
the file generation set named
<code>loopstats</code>:
-<pre class="verbatim">
- 50935 75440.031 0.000006019 13.778190 0.000351733 0.0133806
+<pre class="verbatim"> 50935 75440.031 0.000006019 13.778190 0.000351733 0.0133806
</pre>
<p>The first two fields show the date (Modified Julian Day) and
line of the following form to the current element of a file
generation set named
<code>peerstats</code>:
-<pre class="verbatim">
- 48773 10847.650 127.127.4.1 9714 -0.001605376 0.000000000 0.001424877 0.000958674
+<pre class="verbatim"> 48773 10847.650 127.127.4.1 9714 -0.001605376 0.000000000 0.001424877 0.000958674
</pre>
<p>The first two fields show the date (Modified Julian Day) and
received from a peer or clock driver appends a line of the
following form to the file generation set named
<code>rawstats</code>:
-<pre class="verbatim">
- 50928 2132.543 128.4.1.1 128.4.1.20 3102453281.584327000 3102453281.58622800031 02453332.540806000 3102453332.541458000
+<pre class="verbatim"> 50928 2132.543 128.4.1.1 128.4.1.20 3102453281.584327000 3102453281.58622800031 02453332.540806000 3102453332.541458000
</pre>
<p>The first two fields show the date (Modified Julian Day) and
hour a line of the following form is appended to the file generation
set named
<code>sysstats</code>:
-<pre class="verbatim">
- 50928 2132.543 36000 81965 0 9546 56 71793 512 540 10 147
+<pre class="verbatim"> 50928 2132.543 36000 81965 0 9546 56 71793 512 540 10 147
</pre>
<p>The first two fields show the date (Modified Julian Day) and time
option explained above.
<br><dt><code>filename</code><dd>This string is directly concatenated to the prefix mentioned
above (no intervening
-/).
+‘/’).
This can be modified using
the file argument to the
<kbd>filegen</kbd>
statement.
No
-<span class="file">..</span>
+<samp><span class="file">..</span></samp>
elements are
allowed in this component to prevent filenames referring to
parts outside the filesystem hierarchy denoted by
<code>ntpd(1ntpdmdoc)</code>
server incarnations.
The set member filename is built by appending a
-.
+‘.’
to concatenated
<kbd>prefix</kbd>
and
defined as the period between 00:00 and 24:00 UTC.
The file set
member suffix consists of a
-.
+‘.’
and a day specification in
the form
<code>YYYYMMdd</code>.
</dl>
</dl>
<div class="node">
-<p><hr>
<a name="Access-Control-Support"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">Access Control Support</h4>
page
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>).
+<samp><span class="file">/usr/share/doc/ntp</span></samp>).
<p>The restriction facility was implemented in conformance
with the access policies for the original NSFnet backbone
NTP server is unrestricted).
</dl>
<div class="node">
-<p><hr>
<a name="Automatic-NTP-Configuration-Options"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">Automatic NTP Configuration Options</h4>
multiples of 32 starting at 31.
</dl>
<div class="node">
-<p><hr>
<a name="Reference-Clock-Support"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">Reference Clock Support</h4>
page
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>).
+<samp><span class="file">/usr/share/doc/ntp</span></samp>).
Additional information can be found in the pages linked
there, including the
"Debugging Hints for Reference Clock Drivers"
pages
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>).
+<samp><span class="file">/usr/share/doc/ntp</span></samp>).
In addition, support for a PPS
signal is available as described in the
"Pulse-per-second (PPS) Signal Interfacing"
page
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>).
+<samp><span class="file">/usr/share/doc/ntp</span></samp>).
Many
drivers support special line discipline/streams modules which can
significantly improve the accuracy using the driver.
page
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>).
+<samp><span class="file">/usr/share/doc/ntp</span></samp>).
<p>A reference clock will generally (though not always) be a radio
timecode receiver which is synchronized to a source of standard
"Mitigation Rules and the prefer Keyword"
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>)
+<samp><span class="file">/usr/share/doc/ntp</span></samp>)
page.
The
<code>minpoll</code>
page
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>)
+<samp><span class="file">/usr/share/doc/ntp</span></samp>)
for further information.
<br><dt><code>mode</code> <kbd>int</kbd><dd>Specifies a mode number which is interpreted in a
device-specific fashion.
page
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>).
+<samp><span class="file">/usr/share/doc/ntp</span></samp>).
<br><dt><code>time2</code> <kbd>secs</kbd><dd>Specifies a fixed-point decimal number in seconds, which is
interpreted in a driver-dependent way.
See the descriptions of
page
(available as part of the HTML documentation
provided in
-<span class="file">/usr/share/doc/ntp</span>).
+<samp><span class="file">/usr/share/doc/ntp</span></samp>).
<br><dt><code>stratum</code> <kbd>int</kbd><dd>Specifies the stratum number assigned to the driver, an integer
between 0 and 15.
This number overrides the default stratum number
</dl>
</dl>
<div class="node">
-<p><hr>
<a name="Miscellaneous-Options"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">Miscellaneous Options</h4>
All
<kbd>configkeyword</kbd>
keywords can be prefixed with
-=,
-+
+‘=’,
+‘+’
and
--,
+‘-’,
where
-=
+‘=’
sets the
<code>syslog(3)</code>
priority mask,
-+
+‘+’
adds and
--
+‘-’
removes
messages.
<code>syslog(3)</code>
keyword to enable/disable all
messages of the respective message class.Thus, a minimal log configuration
could look like this:
-<pre class="verbatim">
- logconfig =syncstatus +sysevents
+<pre class="verbatim"> logconfig =syncstatus +sysevents
</pre>
<p>This would just list the synchronizations state of
and the major system events.
For a simple reference server, the
following minimum message configuration could be useful:
-<pre class="verbatim">
- logconfig =syncall +clockall
+<pre class="verbatim"> logconfig =syncall +clockall
</pre>
<p>This configuration will list all clock information and
</ul>
<div class="node">
-<p><hr>
+<a name="ntp.conf-Files"></a>
<a name="ntp_002econf-Files"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">ntp.conf Files</h4>
<dl>
-<dt><span class="file">/etc/ntp.conf</span><dd>the default name of the configuration file
-<br><dt><span class="file">ntp.keys</span><dd>private MD5 keys
-<br><dt><span class="file">ntpkey</span><dd>RSA private key
-<br><dt><span class="file">ntpkey_</span><kbd>host</kbd><dd>RSA public key
-<br><dt><span class="file">ntp_dh</span><dd>Diffie-Hellman agreement parameters
+<dt><samp><span class="file">/etc/ntp.conf</span></samp><dd>the default name of the configuration file
+<br><dt><samp><span class="file">ntp.keys</span></samp><dd>private MD5 keys
+<br><dt><samp><span class="file">ntpkey</span></samp><dd>RSA private key
+<br><dt><samp><span class="file">ntpkey_</span></samp><kbd>host</kbd><dd>RSA public key
+<br><dt><samp><span class="file">ntp_dh</span></samp><dd>Diffie-Hellman agreement parameters
</dl>
<div class="node">
-<p><hr>
+<a name="ntp.conf-See-Also"></a>
<a name="ntp_002econf-See-Also"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">ntp.conf See Also</h4>
at
<code>http://www.ntp.org/</code>.
A snapshot of this documentation is available in HTML format in
-<span class="file">/usr/share/doc/ntp</span>.
+<samp><span class="file">/usr/share/doc/ntp</span></samp>.
<br>
<p><br>
David L. Mills, <em>Network Time Protocol (Version 4)</em>, RFC5905
<div class="node">
-<p><hr>
+<a name="ntp.conf-Bugs"></a>
<a name="ntp_002econf-Bugs"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">ntp.conf Bugs</h4>
detected.
<p>The
-<span class="file">ntpkey_</span><kbd>host</kbd>
+<samp><span class="file">ntpkey_</span></samp><kbd>host</kbd>
files are really digital
certificates.
These should be obtained via secure directory
services when they become universally available.
<div class="node">
-<p><hr>
+<a name="ntp.conf-Notes"></a>
<a name="ntp_002econf-Notes"></a>
-<br>
+<p><hr>
+
+
</div>
<h4 class="subsection">ntp.conf Notes</h4>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp.conf 5 "06 Oct 2015" "4.2.8p4-RC1" "File Formats"
+.TH ntp.conf 5 "17 Oct 2015" "4.2.8p4-sec-RC2" "File Formats"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-1Va40z/ag-GWaWZz)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:06:17 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:31 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTP_CONF 5 File Formats
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:07:05 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:18 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
-.TH ntp.keys 5man "06 Oct 2015" "4.2.8p4-RC1" "File Formats"
+.TH ntp.keys 5man "17 Oct 2015" "4.2.8p4-sec-RC2" "File Formats"
.\"
.\" EDIT THIS FILE WITH CAUTION (ntp.man)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:06:26 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:33 AM by AutoGen 5.18.5
.\" From the definitions ntp.keys.def
.\" and the template file agman-file.tpl
.Sh NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTP_KEYS 5mdoc File Formats
-.Os SunOS 5.10
+.Os Linux 3.2.0-4-686-pae
.\" EDIT THIS FILE WITH CAUTION (ntp.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:07:10 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:22 AM by AutoGen 5.18.5
.\" From the definitions ntp.keys.def
.\" and the template file agmdoc-file.tpl
.Sh NAME
<title>NTP Symmetric Key</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="NTP Symmetric Key">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">NTP Symmetric Key</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#ntp_002ekeys-Description">ntp.keys Description</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002ekeys-Description">ntp.keys Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">NTP's Symmetric Key File User Manual</h2>
<p>This document describes the symmetric key file for the NTP Project's
<code>ntpd</code> program.
- <p>This document applies to version 4.2.8p4-RC1 of <code>ntp.keys</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>ntp.keys</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
</ul>
<div class="node">
+<a name="ntp.keys-Description"></a>
+<a name="ntp_002ekeys-Description"></a>
<p><hr>
-
<a name="ntp_002ekeys-Description"></a>Previous: <a rel="previous" accesskey="p" href="#Top">Top</a>,
+Previous: <a rel="previous" accesskey="p" href="#Top">Top</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
be specified in a configuration file, by default <code>/etc/ntp.keys</code>.
<div class="node">
-<p><hr>
+<a name="ntp.keys-Notes"></a>
<a name="ntp_002ekeys-Notes"></a>
-<br>
+<p><hr>
+
+
</div>
<h3 class="section">Notes about ntp.keys</h3>
</ul>
<div class="node">
+<a name="ntp.keys-Files"></a>
+<a name="ntp_002ekeys-Files"></a>
<p><hr>
-
<a name="ntp_002ekeys-Files"></a>Next: <a rel="next" accesskey="n" href="#ntp_002ekeys-See-Also">ntp.keys See Also</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002ekeys-See-Also">ntp.keys See Also</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002ekeys-Notes">ntp.keys Notes</a>
-<br>
+
</div>
<h4 class="subsection">ntp.keys Files</h4>
<dl>
-<dt><span class="file">/etc/ntp.keys</span><dd>the default name of the configuration file
+<dt><samp><span class="file">/etc/ntp.keys</span></samp><dd>the default name of the configuration file
</dl>
<div class="node">
+<a name="ntp.keys-See-Also"></a>
+<a name="ntp_002ekeys-See-Also"></a>
<p><hr>
-
<a name="ntp_002ekeys-See-Also"></a>Next: <a rel="next" accesskey="n" href="#ntp_002ekeys-Notes">ntp.keys Notes</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002ekeys-Notes">ntp.keys Notes</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002ekeys-Files">ntp.keys Files</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002ekeys-Notes">ntp.keys Notes</a>
-<br>
+
</div>
<h4 class="subsection">ntp.keys See Also</h4>
<code>ntpdc(1ntpdcmdoc)</code>,
<code>sntp(1sntpmdoc)</code>
<div class="node">
+<a name="ntp.keys-Notes"></a>
+<a name="ntp_002ekeys-Notes"></a>
<p><hr>
-
<a name="ntp_002ekeys-Notes"></a>Previous: <a rel="previous" accesskey="p" href="#ntp_002ekeys-See-Also">ntp.keys See Also</a>,
+Previous: <a rel="previous" accesskey="p" href="#ntp_002ekeys-See-Also">ntp.keys See Also</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002ekeys-Notes">ntp.keys Notes</a>
-<br>
+
</div>
<h4 class="subsection">ntp.keys Notes</h4>
-.TH ntp.keys 5 "06 Oct 2015" "4.2.8p4-RC1" "File Formats"
+.TH ntp.keys 5 "17 Oct 2015" "4.2.8p4-sec-RC2" "File Formats"
.\"
.\" EDIT THIS FILE WITH CAUTION (ntp.man)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:06:26 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:33 AM by AutoGen 5.18.5
.\" From the definitions ntp.keys.def
.\" and the template file agman-file.tpl
.Sh NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTP_KEYS 5 File Formats
-.Os SunOS 5.10
+.Os Linux 3.2.0-4-686-pae
.\" EDIT THIS FILE WITH CAUTION (ntp.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:07:10 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:22 AM by AutoGen 5.18.5
.\" From the definitions ntp.keys.def
.\" and the template file agmdoc-file.tpl
.Sh NAME
/*
* EDIT THIS FILE WITH CAUTION (ntpd-opts.c)
*
- * It has been AutoGen-ed October 6, 2015 at 06:02:27 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:22:57 AM by AutoGen 5.18.5
* From the definitions ntpd-opts.def
* and the template file options
*
#endif
extern FILE * option_usage_fp;
#define zCopyright (ntpd_opt_strs+0)
-#define zLicenseDescrip (ntpd_opt_strs+344)
+#define zLicenseDescrip (ntpd_opt_strs+348)
/*
* global included definitions
/**
* static const strings for ntpd options
*/
-static char const ntpd_opt_strs[3141] =
-/* 0 */ "ntpd 4.2.8p4-RC1\n"
+static char const ntpd_opt_strs[3153] =
+/* 0 */ "ntpd 4.2.8p4-sec-RC2\n"
"Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
"can be seen at:\n"
" <http://ntp.org/license>\n"
" <http://opensource.org/licenses/ntp-license.php>\n\0"
-/* 344 */ "Permission to use, copy, modify, and distribute this software and its\n"
+/* 348 */ "Permission to use, copy, modify, and distribute this software and its\n"
"documentation for any purpose with or without fee is hereby granted,\n"
"provided that the above copyright notice appears in all copies and that\n"
"both the copyright notice and this permission notice appear in supporting\n"
"Time Foundation makes no representations about the suitability this\n"
"software for any purpose. It is provided \"as is\" without express or\n"
"implied warranty.\n\0"
-/* 1012 */ "Force IPv4 DNS name resolution\0"
-/* 1043 */ "IPV4\0"
-/* 1048 */ "ipv4\0"
-/* 1053 */ "Force IPv6 DNS name resolution\0"
-/* 1084 */ "IPV6\0"
-/* 1089 */ "ipv6\0"
-/* 1094 */ "Require crypto authentication\0"
-/* 1124 */ "AUTHREQ\0"
-/* 1132 */ "authreq\0"
-/* 1140 */ "Do not require crypto authentication\0"
-/* 1177 */ "AUTHNOREQ\0"
-/* 1187 */ "authnoreq\0"
-/* 1197 */ "Allow us to sync to broadcast servers\0"
-/* 1235 */ "BCASTSYNC\0"
-/* 1245 */ "bcastsync\0"
-/* 1255 */ "configuration file name\0"
-/* 1279 */ "CONFIGFILE\0"
-/* 1290 */ "configfile\0"
-/* 1301 */ "Increase debug verbosity level\0"
-/* 1332 */ "DEBUG_LEVEL\0"
-/* 1344 */ "debug-level\0"
-/* 1356 */ "Set the debug verbosity level\0"
-/* 1386 */ "SET_DEBUG_LEVEL\0"
-/* 1402 */ "set-debug-level\0"
-/* 1418 */ "frequency drift file name\0"
-/* 1444 */ "DRIFTFILE\0"
-/* 1454 */ "driftfile\0"
-/* 1464 */ "Allow the first adjustment to be Big\0"
-/* 1501 */ "PANICGATE\0"
-/* 1511 */ "panicgate\0"
-/* 1521 */ "Step any initial offset correction.\0"
-/* 1557 */ "FORCE_STEP_ONCE\0"
-/* 1573 */ "force-step-once\0"
-/* 1589 */ "Jail directory\0"
-/* 1604 */ "JAILDIR\0"
-/* 1612 */ "jaildir\0"
-/* 1620 */ "built without --enable-clockctl or --enable-linuxcaps or --enable-solarisprivs\0"
-/* 1699 */ "Listen on an interface name or address\0"
-/* 1738 */ "INTERFACE\0"
-/* 1748 */ "interface\0"
-/* 1758 */ "path to symmetric keys\0"
-/* 1781 */ "KEYFILE\0"
-/* 1789 */ "keyfile\0"
-/* 1797 */ "path to the log file\0"
-/* 1818 */ "LOGFILE\0"
-/* 1826 */ "logfile\0"
-/* 1834 */ "Do not listen to virtual interfaces\0"
-/* 1870 */ "NOVIRTUALIPS\0"
-/* 1883 */ "novirtualips\0"
-/* 1896 */ "Modify Multimedia Timer (Windows only)\0"
-/* 1935 */ "MODIFYMMTIMER\0"
-/* 1949 */ "modifymmtimer\0"
-/* 1963 */ "Do not fork\0"
-/* 1975 */ "NOFORK\0"
-/* 1982 */ "nofork\0"
-/* 1989 */ "Run at high priority\0"
-/* 2010 */ "NICE\0"
-/* 2015 */ "nice\0"
-/* 2020 */ "path to the PID file\0"
-/* 2041 */ "PIDFILE\0"
-/* 2049 */ "pidfile\0"
-/* 2057 */ "Process priority\0"
-/* 2074 */ "PRIORITY\0"
-/* 2083 */ "priority\0"
-/* 2092 */ "Set the time and quit\0"
-/* 2114 */ "QUIT\0"
-/* 2119 */ "quit\0"
-/* 2124 */ "Broadcast/propagation delay\0"
-/* 2152 */ "PROPAGATIONDELAY\0"
-/* 2169 */ "propagationdelay\0"
-/* 2186 */ "Save parsed configuration and quit\0"
-/* 2221 */ "SAVECONFIGQUIT\0"
-/* 2236 */ "saveconfigquit\0"
-/* 2251 */ "Statistics file location\0"
-/* 2276 */ "STATSDIR\0"
-/* 2285 */ "statsdir\0"
-/* 2294 */ "Trusted key number\0"
-/* 2313 */ "TRUSTEDKEY\0"
-/* 2324 */ "trustedkey\0"
-/* 2335 */ "Run as userid (or userid:groupid)\0"
-/* 2369 */ "USER\0"
-/* 2374 */ "user\0"
-/* 2379 */ "interval in seconds between scans for new or dropped interfaces\0"
-/* 2443 */ "UPDATEINTERVAL\0"
-/* 2458 */ "updateinterval\0"
-/* 2473 */ "make ARG an ntp variable (RW)\0"
-/* 2503 */ "VAR\0"
-/* 2507 */ "var\0"
-/* 2511 */ "make ARG an ntp variable (RW|DEF)\0"
-/* 2545 */ "DVAR\0"
-/* 2550 */ "dvar\0"
-/* 2555 */ "Seconds to wait for first clock sync\0"
-/* 2592 */ "WAIT_SYNC\0"
-/* 2602 */ "wait-sync\0"
-/* 2612 */ "Slew up to 600 seconds\0"
-/* 2635 */ "SLEW\0"
-/* 2640 */ "slew\0"
-/* 2645 */ "Use CPU cycle counter (Windows only)\0"
-/* 2682 */ "USEPCC\0"
-/* 2689 */ "usepcc\0"
-/* 2696 */ "Force CPU cycle counter use (Windows only)\0"
-/* 2739 */ "PCCFREQ\0"
-/* 2747 */ "pccfreq\0"
-/* 2755 */ "Register with mDNS as a NTP server\0"
-/* 2790 */ "MDNS\0"
-/* 2795 */ "mdns\0"
-/* 2800 */ "display extended usage information and exit\0"
-/* 2844 */ "help\0"
-/* 2849 */ "extended usage information passed thru pager\0"
-/* 2894 */ "more-help\0"
-/* 2904 */ "output version information and exit\0"
-/* 2940 */ "version\0"
-/* 2948 */ "NTPD\0"
-/* 2953 */ "ntpd - NTP daemon program - Ver. 4.2.8p4-RC1\n"
+/* 1016 */ "Force IPv4 DNS name resolution\0"
+/* 1047 */ "IPV4\0"
+/* 1052 */ "ipv4\0"
+/* 1057 */ "Force IPv6 DNS name resolution\0"
+/* 1088 */ "IPV6\0"
+/* 1093 */ "ipv6\0"
+/* 1098 */ "Require crypto authentication\0"
+/* 1128 */ "AUTHREQ\0"
+/* 1136 */ "authreq\0"
+/* 1144 */ "Do not require crypto authentication\0"
+/* 1181 */ "AUTHNOREQ\0"
+/* 1191 */ "authnoreq\0"
+/* 1201 */ "Allow us to sync to broadcast servers\0"
+/* 1239 */ "BCASTSYNC\0"
+/* 1249 */ "bcastsync\0"
+/* 1259 */ "configuration file name\0"
+/* 1283 */ "CONFIGFILE\0"
+/* 1294 */ "configfile\0"
+/* 1305 */ "Increase debug verbosity level\0"
+/* 1336 */ "DEBUG_LEVEL\0"
+/* 1348 */ "debug-level\0"
+/* 1360 */ "Set the debug verbosity level\0"
+/* 1390 */ "SET_DEBUG_LEVEL\0"
+/* 1406 */ "set-debug-level\0"
+/* 1422 */ "frequency drift file name\0"
+/* 1448 */ "DRIFTFILE\0"
+/* 1458 */ "driftfile\0"
+/* 1468 */ "Allow the first adjustment to be Big\0"
+/* 1505 */ "PANICGATE\0"
+/* 1515 */ "panicgate\0"
+/* 1525 */ "Step any initial offset correction.\0"
+/* 1561 */ "FORCE_STEP_ONCE\0"
+/* 1577 */ "force-step-once\0"
+/* 1593 */ "Jail directory\0"
+/* 1608 */ "JAILDIR\0"
+/* 1616 */ "jaildir\0"
+/* 1624 */ "built without --enable-clockctl or --enable-linuxcaps or --enable-solarisprivs\0"
+/* 1703 */ "Listen on an interface name or address\0"
+/* 1742 */ "INTERFACE\0"
+/* 1752 */ "interface\0"
+/* 1762 */ "path to symmetric keys\0"
+/* 1785 */ "KEYFILE\0"
+/* 1793 */ "keyfile\0"
+/* 1801 */ "path to the log file\0"
+/* 1822 */ "LOGFILE\0"
+/* 1830 */ "logfile\0"
+/* 1838 */ "Do not listen to virtual interfaces\0"
+/* 1874 */ "NOVIRTUALIPS\0"
+/* 1887 */ "novirtualips\0"
+/* 1900 */ "Modify Multimedia Timer (Windows only)\0"
+/* 1939 */ "MODIFYMMTIMER\0"
+/* 1953 */ "modifymmtimer\0"
+/* 1967 */ "Do not fork\0"
+/* 1979 */ "NOFORK\0"
+/* 1986 */ "nofork\0"
+/* 1993 */ "Run at high priority\0"
+/* 2014 */ "NICE\0"
+/* 2019 */ "nice\0"
+/* 2024 */ "path to the PID file\0"
+/* 2045 */ "PIDFILE\0"
+/* 2053 */ "pidfile\0"
+/* 2061 */ "Process priority\0"
+/* 2078 */ "PRIORITY\0"
+/* 2087 */ "priority\0"
+/* 2096 */ "Set the time and quit\0"
+/* 2118 */ "QUIT\0"
+/* 2123 */ "quit\0"
+/* 2128 */ "Broadcast/propagation delay\0"
+/* 2156 */ "PROPAGATIONDELAY\0"
+/* 2173 */ "propagationdelay\0"
+/* 2190 */ "Save parsed configuration and quit\0"
+/* 2225 */ "SAVECONFIGQUIT\0"
+/* 2240 */ "saveconfigquit\0"
+/* 2255 */ "Statistics file location\0"
+/* 2280 */ "STATSDIR\0"
+/* 2289 */ "statsdir\0"
+/* 2298 */ "Trusted key number\0"
+/* 2317 */ "TRUSTEDKEY\0"
+/* 2328 */ "trustedkey\0"
+/* 2339 */ "Run as userid (or userid:groupid)\0"
+/* 2373 */ "USER\0"
+/* 2378 */ "user\0"
+/* 2383 */ "interval in seconds between scans for new or dropped interfaces\0"
+/* 2447 */ "UPDATEINTERVAL\0"
+/* 2462 */ "updateinterval\0"
+/* 2477 */ "make ARG an ntp variable (RW)\0"
+/* 2507 */ "VAR\0"
+/* 2511 */ "var\0"
+/* 2515 */ "make ARG an ntp variable (RW|DEF)\0"
+/* 2549 */ "DVAR\0"
+/* 2554 */ "dvar\0"
+/* 2559 */ "Seconds to wait for first clock sync\0"
+/* 2596 */ "WAIT_SYNC\0"
+/* 2606 */ "wait-sync\0"
+/* 2616 */ "Slew up to 600 seconds\0"
+/* 2639 */ "SLEW\0"
+/* 2644 */ "slew\0"
+/* 2649 */ "Use CPU cycle counter (Windows only)\0"
+/* 2686 */ "USEPCC\0"
+/* 2693 */ "usepcc\0"
+/* 2700 */ "Force CPU cycle counter use (Windows only)\0"
+/* 2743 */ "PCCFREQ\0"
+/* 2751 */ "pccfreq\0"
+/* 2759 */ "Register with mDNS as a NTP server\0"
+/* 2794 */ "MDNS\0"
+/* 2799 */ "mdns\0"
+/* 2804 */ "display extended usage information and exit\0"
+/* 2848 */ "help\0"
+/* 2853 */ "extended usage information passed thru pager\0"
+/* 2898 */ "more-help\0"
+/* 2908 */ "output version information and exit\0"
+/* 2944 */ "version\0"
+/* 2952 */ "NTPD\0"
+/* 2957 */ "ntpd - NTP daemon program - Ver. 4.2.8p4-sec-RC2\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \\\n"
"\t\t[ <server1> ... <serverN> ]\n\0"
-/* 3088 */ "http://bugs.ntp.org, bugs@ntp.org\0"
-/* 3122 */ "\n\0"
-/* 3124 */ "ntpd 4.2.8p4-RC1";
+/* 3096 */ "http://bugs.ntp.org, bugs@ntp.org\0"
+/* 3130 */ "\n\0"
+/* 3132 */ "ntpd 4.2.8p4-sec-RC2";
/**
* ipv4 option description with
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the ipv4 option */
-#define IPV4_DESC (ntpd_opt_strs+1012)
+#define IPV4_DESC (ntpd_opt_strs+1016)
/** Upper-cased name for the ipv4 option */
-#define IPV4_NAME (ntpd_opt_strs+1043)
+#define IPV4_NAME (ntpd_opt_strs+1047)
/** Name string for the ipv4 option */
-#define IPV4_name (ntpd_opt_strs+1048)
+#define IPV4_name (ntpd_opt_strs+1052)
/** Other options that appear in conjunction with the ipv4 option */
static int const aIpv4CantList[] = {
INDEX_OPT_IPV6, NO_EQUIVALENT };
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the ipv6 option */
-#define IPV6_DESC (ntpd_opt_strs+1053)
+#define IPV6_DESC (ntpd_opt_strs+1057)
/** Upper-cased name for the ipv6 option */
-#define IPV6_NAME (ntpd_opt_strs+1084)
+#define IPV6_NAME (ntpd_opt_strs+1088)
/** Name string for the ipv6 option */
-#define IPV6_name (ntpd_opt_strs+1089)
+#define IPV6_name (ntpd_opt_strs+1093)
/** Other options that appear in conjunction with the ipv6 option */
static int const aIpv6CantList[] = {
INDEX_OPT_IPV4, NO_EQUIVALENT };
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the authreq option */
-#define AUTHREQ_DESC (ntpd_opt_strs+1094)
+#define AUTHREQ_DESC (ntpd_opt_strs+1098)
/** Upper-cased name for the authreq option */
-#define AUTHREQ_NAME (ntpd_opt_strs+1124)
+#define AUTHREQ_NAME (ntpd_opt_strs+1128)
/** Name string for the authreq option */
-#define AUTHREQ_name (ntpd_opt_strs+1132)
+#define AUTHREQ_name (ntpd_opt_strs+1136)
/** Other options that appear in conjunction with the authreq option */
static int const aAuthreqCantList[] = {
INDEX_OPT_AUTHNOREQ, NO_EQUIVALENT };
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the authnoreq option */
-#define AUTHNOREQ_DESC (ntpd_opt_strs+1140)
+#define AUTHNOREQ_DESC (ntpd_opt_strs+1144)
/** Upper-cased name for the authnoreq option */
-#define AUTHNOREQ_NAME (ntpd_opt_strs+1177)
+#define AUTHNOREQ_NAME (ntpd_opt_strs+1181)
/** Name string for the authnoreq option */
-#define AUTHNOREQ_name (ntpd_opt_strs+1187)
+#define AUTHNOREQ_name (ntpd_opt_strs+1191)
/** Other options that appear in conjunction with the authnoreq option */
static int const aAuthnoreqCantList[] = {
INDEX_OPT_AUTHREQ, NO_EQUIVALENT };
* bcastsync option description:
*/
/** Descriptive text for the bcastsync option */
-#define BCASTSYNC_DESC (ntpd_opt_strs+1197)
+#define BCASTSYNC_DESC (ntpd_opt_strs+1201)
/** Upper-cased name for the bcastsync option */
-#define BCASTSYNC_NAME (ntpd_opt_strs+1235)
+#define BCASTSYNC_NAME (ntpd_opt_strs+1239)
/** Name string for the bcastsync option */
-#define BCASTSYNC_name (ntpd_opt_strs+1245)
+#define BCASTSYNC_name (ntpd_opt_strs+1249)
/** Compiled in flag settings for the bcastsync option */
#define BCASTSYNC_FLAGS (OPTST_DISABLED)
* configfile option description:
*/
/** Descriptive text for the configfile option */
-#define CONFIGFILE_DESC (ntpd_opt_strs+1255)
+#define CONFIGFILE_DESC (ntpd_opt_strs+1259)
/** Upper-cased name for the configfile option */
-#define CONFIGFILE_NAME (ntpd_opt_strs+1279)
+#define CONFIGFILE_NAME (ntpd_opt_strs+1283)
/** Name string for the configfile option */
-#define CONFIGFILE_name (ntpd_opt_strs+1290)
+#define CONFIGFILE_name (ntpd_opt_strs+1294)
/** Compiled in flag settings for the configfile option */
#define CONFIGFILE_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* debug-level option description:
*/
/** Descriptive text for the debug-level option */
-#define DEBUG_LEVEL_DESC (ntpd_opt_strs+1301)
+#define DEBUG_LEVEL_DESC (ntpd_opt_strs+1305)
/** Upper-cased name for the debug-level option */
-#define DEBUG_LEVEL_NAME (ntpd_opt_strs+1332)
+#define DEBUG_LEVEL_NAME (ntpd_opt_strs+1336)
/** Name string for the debug-level option */
-#define DEBUG_LEVEL_name (ntpd_opt_strs+1344)
+#define DEBUG_LEVEL_name (ntpd_opt_strs+1348)
/** Compiled in flag settings for the debug-level option */
#define DEBUG_LEVEL_FLAGS (OPTST_DISABLED)
* set-debug-level option description:
*/
/** Descriptive text for the set-debug-level option */
-#define SET_DEBUG_LEVEL_DESC (ntpd_opt_strs+1356)
+#define SET_DEBUG_LEVEL_DESC (ntpd_opt_strs+1360)
/** Upper-cased name for the set-debug-level option */
-#define SET_DEBUG_LEVEL_NAME (ntpd_opt_strs+1386)
+#define SET_DEBUG_LEVEL_NAME (ntpd_opt_strs+1390)
/** Name string for the set-debug-level option */
-#define SET_DEBUG_LEVEL_name (ntpd_opt_strs+1402)
+#define SET_DEBUG_LEVEL_name (ntpd_opt_strs+1406)
/** Compiled in flag settings for the set-debug-level option */
#define SET_DEBUG_LEVEL_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
* driftfile option description:
*/
/** Descriptive text for the driftfile option */
-#define DRIFTFILE_DESC (ntpd_opt_strs+1418)
+#define DRIFTFILE_DESC (ntpd_opt_strs+1422)
/** Upper-cased name for the driftfile option */
-#define DRIFTFILE_NAME (ntpd_opt_strs+1444)
+#define DRIFTFILE_NAME (ntpd_opt_strs+1448)
/** Name string for the driftfile option */
-#define DRIFTFILE_name (ntpd_opt_strs+1454)
+#define DRIFTFILE_name (ntpd_opt_strs+1458)
/** Compiled in flag settings for the driftfile option */
#define DRIFTFILE_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* panicgate option description:
*/
/** Descriptive text for the panicgate option */
-#define PANICGATE_DESC (ntpd_opt_strs+1464)
+#define PANICGATE_DESC (ntpd_opt_strs+1468)
/** Upper-cased name for the panicgate option */
-#define PANICGATE_NAME (ntpd_opt_strs+1501)
+#define PANICGATE_NAME (ntpd_opt_strs+1505)
/** Name string for the panicgate option */
-#define PANICGATE_name (ntpd_opt_strs+1511)
+#define PANICGATE_name (ntpd_opt_strs+1515)
/** Compiled in flag settings for the panicgate option */
#define PANICGATE_FLAGS (OPTST_DISABLED)
* force_step_once option description:
*/
/** Descriptive text for the force_step_once option */
-#define FORCE_STEP_ONCE_DESC (ntpd_opt_strs+1521)
+#define FORCE_STEP_ONCE_DESC (ntpd_opt_strs+1525)
/** Upper-cased name for the force_step_once option */
-#define FORCE_STEP_ONCE_NAME (ntpd_opt_strs+1557)
+#define FORCE_STEP_ONCE_NAME (ntpd_opt_strs+1561)
/** Name string for the force_step_once option */
-#define FORCE_STEP_ONCE_name (ntpd_opt_strs+1573)
+#define FORCE_STEP_ONCE_name (ntpd_opt_strs+1577)
/** Compiled in flag settings for the force_step_once option */
#define FORCE_STEP_ONCE_FLAGS (OPTST_DISABLED)
*/
#ifdef HAVE_DROPROOT
/** Descriptive text for the jaildir option */
-#define JAILDIR_DESC (ntpd_opt_strs+1589)
+#define JAILDIR_DESC (ntpd_opt_strs+1593)
/** Upper-cased name for the jaildir option */
-#define JAILDIR_NAME (ntpd_opt_strs+1604)
+#define JAILDIR_NAME (ntpd_opt_strs+1608)
/** Name string for the jaildir option */
-#define JAILDIR_name (ntpd_opt_strs+1612)
+#define JAILDIR_name (ntpd_opt_strs+1616)
/** Compiled in flag settings for the jaildir option */
#define JAILDIR_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
#define JAILDIR_FLAGS (OPTST_OMITTED | OPTST_NO_INIT)
#define JAILDIR_NAME NULL
/** Descriptive text for the jaildir option */
-#define JAILDIR_DESC (ntpd_opt_strs+1620)
-#define JAILDIR_name (ntpd_opt_strs+1612)
+#define JAILDIR_DESC (ntpd_opt_strs+1624)
+#define JAILDIR_name (ntpd_opt_strs+1616)
#endif /* HAVE_DROPROOT */
/**
* interface option description:
*/
/** Descriptive text for the interface option */
-#define INTERFACE_DESC (ntpd_opt_strs+1699)
+#define INTERFACE_DESC (ntpd_opt_strs+1703)
/** Upper-cased name for the interface option */
-#define INTERFACE_NAME (ntpd_opt_strs+1738)
+#define INTERFACE_NAME (ntpd_opt_strs+1742)
/** Name string for the interface option */
-#define INTERFACE_name (ntpd_opt_strs+1748)
+#define INTERFACE_name (ntpd_opt_strs+1752)
/** Compiled in flag settings for the interface option */
#define INTERFACE_FLAGS (OPTST_DISABLED | OPTST_STACKED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* keyfile option description:
*/
/** Descriptive text for the keyfile option */
-#define KEYFILE_DESC (ntpd_opt_strs+1758)
+#define KEYFILE_DESC (ntpd_opt_strs+1762)
/** Upper-cased name for the keyfile option */
-#define KEYFILE_NAME (ntpd_opt_strs+1781)
+#define KEYFILE_NAME (ntpd_opt_strs+1785)
/** Name string for the keyfile option */
-#define KEYFILE_name (ntpd_opt_strs+1789)
+#define KEYFILE_name (ntpd_opt_strs+1793)
/** Compiled in flag settings for the keyfile option */
#define KEYFILE_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* logfile option description:
*/
/** Descriptive text for the logfile option */
-#define LOGFILE_DESC (ntpd_opt_strs+1797)
+#define LOGFILE_DESC (ntpd_opt_strs+1801)
/** Upper-cased name for the logfile option */
-#define LOGFILE_NAME (ntpd_opt_strs+1818)
+#define LOGFILE_NAME (ntpd_opt_strs+1822)
/** Name string for the logfile option */
-#define LOGFILE_name (ntpd_opt_strs+1826)
+#define LOGFILE_name (ntpd_opt_strs+1830)
/** Compiled in flag settings for the logfile option */
#define LOGFILE_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* novirtualips option description:
*/
/** Descriptive text for the novirtualips option */
-#define NOVIRTUALIPS_DESC (ntpd_opt_strs+1834)
+#define NOVIRTUALIPS_DESC (ntpd_opt_strs+1838)
/** Upper-cased name for the novirtualips option */
-#define NOVIRTUALIPS_NAME (ntpd_opt_strs+1870)
+#define NOVIRTUALIPS_NAME (ntpd_opt_strs+1874)
/** Name string for the novirtualips option */
-#define NOVIRTUALIPS_name (ntpd_opt_strs+1883)
+#define NOVIRTUALIPS_name (ntpd_opt_strs+1887)
/** Compiled in flag settings for the novirtualips option */
#define NOVIRTUALIPS_FLAGS (OPTST_DISABLED)
*/
#ifdef SYS_WINNT
/** Descriptive text for the modifymmtimer option */
-#define MODIFYMMTIMER_DESC (ntpd_opt_strs+1896)
+#define MODIFYMMTIMER_DESC (ntpd_opt_strs+1900)
/** Upper-cased name for the modifymmtimer option */
-#define MODIFYMMTIMER_NAME (ntpd_opt_strs+1935)
+#define MODIFYMMTIMER_NAME (ntpd_opt_strs+1939)
/** Name string for the modifymmtimer option */
-#define MODIFYMMTIMER_name (ntpd_opt_strs+1949)
+#define MODIFYMMTIMER_name (ntpd_opt_strs+1953)
/** Compiled in flag settings for the modifymmtimer option */
#define MODIFYMMTIMER_FLAGS (OPTST_DISABLED)
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the nofork option */
-#define NOFORK_DESC (ntpd_opt_strs+1963)
+#define NOFORK_DESC (ntpd_opt_strs+1967)
/** Upper-cased name for the nofork option */
-#define NOFORK_NAME (ntpd_opt_strs+1975)
+#define NOFORK_NAME (ntpd_opt_strs+1979)
/** Name string for the nofork option */
-#define NOFORK_name (ntpd_opt_strs+1982)
+#define NOFORK_name (ntpd_opt_strs+1986)
/** Other options that appear in conjunction with the nofork option */
static int const aNoforkCantList[] = {
INDEX_OPT_WAIT_SYNC, NO_EQUIVALENT };
* nice option description:
*/
/** Descriptive text for the nice option */
-#define NICE_DESC (ntpd_opt_strs+1989)
+#define NICE_DESC (ntpd_opt_strs+1993)
/** Upper-cased name for the nice option */
-#define NICE_NAME (ntpd_opt_strs+2010)
+#define NICE_NAME (ntpd_opt_strs+2014)
/** Name string for the nice option */
-#define NICE_name (ntpd_opt_strs+2015)
+#define NICE_name (ntpd_opt_strs+2019)
/** Compiled in flag settings for the nice option */
#define NICE_FLAGS (OPTST_DISABLED)
* pidfile option description:
*/
/** Descriptive text for the pidfile option */
-#define PIDFILE_DESC (ntpd_opt_strs+2020)
+#define PIDFILE_DESC (ntpd_opt_strs+2024)
/** Upper-cased name for the pidfile option */
-#define PIDFILE_NAME (ntpd_opt_strs+2041)
+#define PIDFILE_NAME (ntpd_opt_strs+2045)
/** Name string for the pidfile option */
-#define PIDFILE_name (ntpd_opt_strs+2049)
+#define PIDFILE_name (ntpd_opt_strs+2053)
/** Compiled in flag settings for the pidfile option */
#define PIDFILE_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* priority option description:
*/
/** Descriptive text for the priority option */
-#define PRIORITY_DESC (ntpd_opt_strs+2057)
+#define PRIORITY_DESC (ntpd_opt_strs+2061)
/** Upper-cased name for the priority option */
-#define PRIORITY_NAME (ntpd_opt_strs+2074)
+#define PRIORITY_NAME (ntpd_opt_strs+2078)
/** Name string for the priority option */
-#define PRIORITY_name (ntpd_opt_strs+2083)
+#define PRIORITY_name (ntpd_opt_strs+2087)
/** Compiled in flag settings for the priority option */
#define PRIORITY_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the quit option */
-#define QUIT_DESC (ntpd_opt_strs+2092)
+#define QUIT_DESC (ntpd_opt_strs+2096)
/** Upper-cased name for the quit option */
-#define QUIT_NAME (ntpd_opt_strs+2114)
+#define QUIT_NAME (ntpd_opt_strs+2118)
/** Name string for the quit option */
-#define QUIT_name (ntpd_opt_strs+2119)
+#define QUIT_name (ntpd_opt_strs+2123)
/** Other options that appear in conjunction with the quit option */
static int const aQuitCantList[] = {
INDEX_OPT_SAVECONFIGQUIT,
* propagationdelay option description:
*/
/** Descriptive text for the propagationdelay option */
-#define PROPAGATIONDELAY_DESC (ntpd_opt_strs+2124)
+#define PROPAGATIONDELAY_DESC (ntpd_opt_strs+2128)
/** Upper-cased name for the propagationdelay option */
-#define PROPAGATIONDELAY_NAME (ntpd_opt_strs+2152)
+#define PROPAGATIONDELAY_NAME (ntpd_opt_strs+2156)
/** Name string for the propagationdelay option */
-#define PROPAGATIONDELAY_name (ntpd_opt_strs+2169)
+#define PROPAGATIONDELAY_name (ntpd_opt_strs+2173)
/** Compiled in flag settings for the propagationdelay option */
#define PROPAGATIONDELAY_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
*/
#ifdef SAVECONFIG
/** Descriptive text for the saveconfigquit option */
-#define SAVECONFIGQUIT_DESC (ntpd_opt_strs+2186)
+#define SAVECONFIGQUIT_DESC (ntpd_opt_strs+2190)
/** Upper-cased name for the saveconfigquit option */
-#define SAVECONFIGQUIT_NAME (ntpd_opt_strs+2221)
+#define SAVECONFIGQUIT_NAME (ntpd_opt_strs+2225)
/** Name string for the saveconfigquit option */
-#define SAVECONFIGQUIT_name (ntpd_opt_strs+2236)
+#define SAVECONFIGQUIT_name (ntpd_opt_strs+2240)
/** Other options that appear in conjunction with the saveconfigquit option */
static int const aSaveconfigquitCantList[] = {
INDEX_OPT_QUIT,
* statsdir option description:
*/
/** Descriptive text for the statsdir option */
-#define STATSDIR_DESC (ntpd_opt_strs+2251)
+#define STATSDIR_DESC (ntpd_opt_strs+2255)
/** Upper-cased name for the statsdir option */
-#define STATSDIR_NAME (ntpd_opt_strs+2276)
+#define STATSDIR_NAME (ntpd_opt_strs+2280)
/** Name string for the statsdir option */
-#define STATSDIR_name (ntpd_opt_strs+2285)
+#define STATSDIR_name (ntpd_opt_strs+2289)
/** Compiled in flag settings for the statsdir option */
#define STATSDIR_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* trustedkey option description:
*/
/** Descriptive text for the trustedkey option */
-#define TRUSTEDKEY_DESC (ntpd_opt_strs+2294)
+#define TRUSTEDKEY_DESC (ntpd_opt_strs+2298)
/** Upper-cased name for the trustedkey option */
-#define TRUSTEDKEY_NAME (ntpd_opt_strs+2313)
+#define TRUSTEDKEY_NAME (ntpd_opt_strs+2317)
/** Name string for the trustedkey option */
-#define TRUSTEDKEY_name (ntpd_opt_strs+2324)
+#define TRUSTEDKEY_name (ntpd_opt_strs+2328)
/** Compiled in flag settings for the trustedkey option */
#define TRUSTEDKEY_FLAGS (OPTST_DISABLED | OPTST_STACKED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
*/
#ifdef HAVE_DROPROOT
/** Descriptive text for the user option */
-#define USER_DESC (ntpd_opt_strs+2335)
+#define USER_DESC (ntpd_opt_strs+2339)
/** Upper-cased name for the user option */
-#define USER_NAME (ntpd_opt_strs+2369)
+#define USER_NAME (ntpd_opt_strs+2373)
/** Name string for the user option */
-#define USER_name (ntpd_opt_strs+2374)
+#define USER_name (ntpd_opt_strs+2378)
/** Compiled in flag settings for the user option */
#define USER_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
#define USER_FLAGS (OPTST_OMITTED | OPTST_NO_INIT)
#define USER_NAME NULL
/** Descriptive text for the user option */
-#define USER_DESC (ntpd_opt_strs+1620)
-#define USER_name (ntpd_opt_strs+2374)
+#define USER_DESC (ntpd_opt_strs+1624)
+#define USER_name (ntpd_opt_strs+2378)
#endif /* HAVE_DROPROOT */
/**
* updateinterval option description:
*/
/** Descriptive text for the updateinterval option */
-#define UPDATEINTERVAL_DESC (ntpd_opt_strs+2379)
+#define UPDATEINTERVAL_DESC (ntpd_opt_strs+2383)
/** Upper-cased name for the updateinterval option */
-#define UPDATEINTERVAL_NAME (ntpd_opt_strs+2443)
+#define UPDATEINTERVAL_NAME (ntpd_opt_strs+2447)
/** Name string for the updateinterval option */
-#define UPDATEINTERVAL_name (ntpd_opt_strs+2458)
+#define UPDATEINTERVAL_name (ntpd_opt_strs+2462)
/** Compiled in flag settings for the updateinterval option */
#define UPDATEINTERVAL_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
* var option description:
*/
/** Descriptive text for the var option */
-#define VAR_DESC (ntpd_opt_strs+2473)
+#define VAR_DESC (ntpd_opt_strs+2477)
/** Upper-cased name for the var option */
-#define VAR_NAME (ntpd_opt_strs+2503)
+#define VAR_NAME (ntpd_opt_strs+2507)
/** Name string for the var option */
-#define VAR_name (ntpd_opt_strs+2507)
+#define VAR_name (ntpd_opt_strs+2511)
/** Compiled in flag settings for the var option */
#define VAR_FLAGS (OPTST_DISABLED | OPTST_STACKED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* dvar option description:
*/
/** Descriptive text for the dvar option */
-#define DVAR_DESC (ntpd_opt_strs+2511)
+#define DVAR_DESC (ntpd_opt_strs+2515)
/** Upper-cased name for the dvar option */
-#define DVAR_NAME (ntpd_opt_strs+2545)
+#define DVAR_NAME (ntpd_opt_strs+2549)
/** Name string for the dvar option */
-#define DVAR_name (ntpd_opt_strs+2550)
+#define DVAR_name (ntpd_opt_strs+2554)
/** Compiled in flag settings for the dvar option */
#define DVAR_FLAGS (OPTST_DISABLED | OPTST_STACKED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
*/
#ifdef HAVE_WORKING_FORK
/** Descriptive text for the wait-sync option */
-#define WAIT_SYNC_DESC (ntpd_opt_strs+2555)
+#define WAIT_SYNC_DESC (ntpd_opt_strs+2559)
/** Upper-cased name for the wait-sync option */
-#define WAIT_SYNC_NAME (ntpd_opt_strs+2592)
+#define WAIT_SYNC_NAME (ntpd_opt_strs+2596)
/** Name string for the wait-sync option */
-#define WAIT_SYNC_name (ntpd_opt_strs+2602)
+#define WAIT_SYNC_name (ntpd_opt_strs+2606)
/** Other options that appear in conjunction with the wait-sync option */
static int const aWait_SyncCantList[] = {
INDEX_OPT_NOFORK,
* slew option description:
*/
/** Descriptive text for the slew option */
-#define SLEW_DESC (ntpd_opt_strs+2612)
+#define SLEW_DESC (ntpd_opt_strs+2616)
/** Upper-cased name for the slew option */
-#define SLEW_NAME (ntpd_opt_strs+2635)
+#define SLEW_NAME (ntpd_opt_strs+2639)
/** Name string for the slew option */
-#define SLEW_name (ntpd_opt_strs+2640)
+#define SLEW_name (ntpd_opt_strs+2644)
/** Compiled in flag settings for the slew option */
#define SLEW_FLAGS (OPTST_DISABLED)
*/
#ifdef SYS_WINNT
/** Descriptive text for the usepcc option */
-#define USEPCC_DESC (ntpd_opt_strs+2645)
+#define USEPCC_DESC (ntpd_opt_strs+2649)
/** Upper-cased name for the usepcc option */
-#define USEPCC_NAME (ntpd_opt_strs+2682)
+#define USEPCC_NAME (ntpd_opt_strs+2686)
/** Name string for the usepcc option */
-#define USEPCC_name (ntpd_opt_strs+2689)
+#define USEPCC_name (ntpd_opt_strs+2693)
/** Compiled in flag settings for the usepcc option */
#define USEPCC_FLAGS (OPTST_DISABLED)
*/
#ifdef SYS_WINNT
/** Descriptive text for the pccfreq option */
-#define PCCFREQ_DESC (ntpd_opt_strs+2696)
+#define PCCFREQ_DESC (ntpd_opt_strs+2700)
/** Upper-cased name for the pccfreq option */
-#define PCCFREQ_NAME (ntpd_opt_strs+2739)
+#define PCCFREQ_NAME (ntpd_opt_strs+2743)
/** Name string for the pccfreq option */
-#define PCCFREQ_name (ntpd_opt_strs+2747)
+#define PCCFREQ_name (ntpd_opt_strs+2751)
/** Compiled in flag settings for the pccfreq option */
#define PCCFREQ_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
*/
#ifdef HAVE_DNSREGISTRATION
/** Descriptive text for the mdns option */
-#define MDNS_DESC (ntpd_opt_strs+2755)
+#define MDNS_DESC (ntpd_opt_strs+2759)
/** Upper-cased name for the mdns option */
-#define MDNS_NAME (ntpd_opt_strs+2790)
+#define MDNS_NAME (ntpd_opt_strs+2794)
/** Name string for the mdns option */
-#define MDNS_name (ntpd_opt_strs+2795)
+#define MDNS_name (ntpd_opt_strs+2799)
/** Compiled in flag settings for the mdns option */
#define MDNS_FLAGS (OPTST_DISABLED)
/*
* Help/More_Help/Version option descriptions:
*/
-#define HELP_DESC (ntpd_opt_strs+2800)
-#define HELP_name (ntpd_opt_strs+2844)
+#define HELP_DESC (ntpd_opt_strs+2804)
+#define HELP_name (ntpd_opt_strs+2848)
#ifdef HAVE_WORKING_FORK
-#define MORE_HELP_DESC (ntpd_opt_strs+2849)
-#define MORE_HELP_name (ntpd_opt_strs+2894)
+#define MORE_HELP_DESC (ntpd_opt_strs+2853)
+#define MORE_HELP_name (ntpd_opt_strs+2898)
#define MORE_HELP_FLAGS (OPTST_IMM | OPTST_NO_INIT)
#else
#define MORE_HELP_DESC HELP_DESC
# define VER_FLAGS (OPTST_SET_ARGTYPE(OPARG_TYPE_STRING) | \
OPTST_ARG_OPTIONAL | OPTST_IMM | OPTST_NO_INIT)
#endif
-#define VER_DESC (ntpd_opt_strs+2904)
-#define VER_name (ntpd_opt_strs+2940)
+#define VER_DESC (ntpd_opt_strs+2908)
+#define VER_name (ntpd_opt_strs+2944)
/**
* Declare option callback procedures
*/
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/** Reference to the upper cased version of ntpd. */
-#define zPROGNAME (ntpd_opt_strs+2948)
+#define zPROGNAME (ntpd_opt_strs+2952)
/** Reference to the title line for ntpd usage. */
-#define zUsageTitle (ntpd_opt_strs+2953)
+#define zUsageTitle (ntpd_opt_strs+2957)
/** There is no ntpd configuration file. */
#define zRcName NULL
/** There are no directories to search for ntpd config files. */
#define apzHomeList NULL
/** The ntpd program bug email address. */
-#define zBugsAddr (ntpd_opt_strs+3088)
+#define zBugsAddr (ntpd_opt_strs+3096)
/** Clarification/explanation of what ntpd does. */
-#define zExplain (ntpd_opt_strs+3122)
+#define zExplain (ntpd_opt_strs+3130)
/** Extra detail explaining what ntpd does. */
#define zDetail (NULL)
/** The full version string for ntpd. */
-#define zFullVersion (ntpd_opt_strs+3124)
+#define zFullVersion (ntpd_opt_strs+3132)
/* extracted from optcode.tlib near line 364 */
#if defined(ENABLE_NLS)
translate option names.
*/
/* referenced via ntpdOptions.pzCopyright */
- puts(_("ntpd 4.2.8p4-RC1\n\
+ puts(_("ntpd 4.2.8p4-sec-RC2\n\
Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("output version information and exit"));
/* referenced via ntpdOptions.pzUsageTitle */
- puts(_("ntpd - NTP daemon program - Ver. 4.2.8p4-RC1\n\
+ puts(_("ntpd - NTP daemon program - Ver. 4.2.8p4-sec-RC2\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \\\n\
\t\t[ <server1> ... <serverN> ]\n"));
puts(_("\n"));
/* referenced via ntpdOptions.pzFullVersion */
- puts(_("ntpd 4.2.8p4-RC1"));
+ puts(_("ntpd 4.2.8p4-sec-RC2"));
/* referenced via ntpdOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (ntpd-opts.h)
*
- * It has been AutoGen-ed October 6, 2015 at 06:02:26 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:22:57 AM by AutoGen 5.18.5
* From the definitions ntpd-opts.def
* and the template file options
*
/** count of all options for ntpd */
#define OPTION_CT 38
/** ntpd version */
-#define NTPD_VERSION "4.2.8p4-RC1"
+#define NTPD_VERSION "4.2.8p4-sec-RC2"
/** Full ntpd version text */
-#define NTPD_FULL_VERSION "ntpd 4.2.8p4-RC1"
+#define NTPD_FULL_VERSION "ntpd 4.2.8p4-sec-RC2"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpd 1ntpdman "06 Oct 2015" "4.2.8p4-RC1" "User Commands"
+.TH ntpd 1ntpdman "17 Oct 2015" "4.2.8p4-sec-RC2" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-XGaqiB/ag-sHaihB)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:06:33 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:35 AM by AutoGen 5.18.5
.\" From the definitions ntpd-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPD 1ntpdmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpd-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:07:13 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:24 AM by AutoGen 5.18.5
.\" From the definitions ntpd-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>ntpd: Network Time Protocol (NTP) Daemon User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="ntpd: Network Time Protocol (NTP) Daemon User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">ntpd: Network Time Protocol (NTP) Daemon User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#ntpd-Description">ntpd Description</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-Description">ntpd Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">ntpd: Network Time Protocol (NTP) Daemon User Manual</h2>
symmetric and broadcast modes, and with both symmetric-key and public-key
cryptography.
- <p>This document applies to version 4.2.8p4-RC1 of <code>ntpd</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>ntpd</code>.
<ul class="menu">
<li><a accesskey="1" href="#ntpd-Description">ntpd Description</a>: Description
</ul>
<div class="node">
-<p><hr>
<a name="ntpd-Description"></a>
-<br>
+<p><hr>
+
+
</div>
<!-- node-name, next, previous, up -->
the daemon times out and exits without setting the clock.
<div class="node">
-<p><hr>
<a name="ntpd-Invocation"></a>
-<br>
+<p><hr>
+
+
</div>
<h3 class="section">Invoking ntpd</h3>
This software is released under the NTP license, <http://ntp.org/license>.
<ul class="menu">
-<li><a accesskey="1" href="#ntpd-usage">ntpd usage</a>: ntpd help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#ntpd-usage">ntpd usage</a>: ntpd help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#ntpd-ipv4">ntpd ipv4</a>: ipv4 option (-4)
<li><a accesskey="3" href="#ntpd-ipv6">ntpd ipv6</a>: ipv6 option (-6)
<li><a accesskey="4" href="#ntpd-authreq">ntpd authreq</a>: authreq option (-a)
</ul>
<div class="node">
+<a name="ntpd-usage"></a>
<p><hr>
-
<a name="ntpd-usage"></a>Next: <a rel="next" accesskey="n" href="#ntpd-ipv4">ntpd ipv4</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-ipv4">ntpd ipv4</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">ntpd help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">ntpd help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-ntpd-help-3"></a>
This is the automatically generated usage text for ntpd.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
-<pre class="example">ntpd - NTP daemon program - Ver. 4.2.8p3
+<pre class="example">ntpd - NTP daemon program - Ver. 4.2.8p4-RC1
Usage: ntpd [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \
[ <server1> ... <serverN> ]
Flg Arg Option-Name Description
Please send bug reports to: <http://bugs.ntp.org, bugs@ntp.org>
</pre>
<div class="node">
+<a name="ntpd-ipv4"></a>
<p><hr>
-
<a name="ntpd-ipv4"></a>Next: <a rel="next" accesskey="n" href="#ntpd-ipv6">ntpd ipv6</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-ipv6">ntpd ipv6</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-usage">ntpd usage</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ipv4 option (-4)</h4>
<p>Force DNS resolution of following host names on the command line
to the IPv4 namespace.
<div class="node">
+<a name="ntpd-ipv6"></a>
<p><hr>
-
<a name="ntpd-ipv6"></a>Next: <a rel="next" accesskey="n" href="#ntpd-authreq">ntpd authreq</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-authreq">ntpd authreq</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-ipv4">ntpd ipv4</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ipv6 option (-6)</h4>
<p>Force DNS resolution of following host names on the command line
to the IPv6 namespace.
<div class="node">
+<a name="ntpd-authreq"></a>
<p><hr>
-
<a name="ntpd-authreq"></a>Next: <a rel="next" accesskey="n" href="#ntpd-authnoreq">ntpd authnoreq</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-authnoreq">ntpd authnoreq</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-ipv6">ntpd ipv6</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">authreq option (-a)</h4>
multicast client and symmetric passive associations.
This is the default.
<div class="node">
+<a name="ntpd-authnoreq"></a>
<p><hr>
-
<a name="ntpd-authnoreq"></a>Next: <a rel="next" accesskey="n" href="#ntpd-configfile">ntpd configfile</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-configfile">ntpd configfile</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-authreq">ntpd authreq</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">authnoreq option (-A)</h4>
multicast client and symmetric passive associations.
This is almost never a good idea.
<div class="node">
+<a name="ntpd-configfile"></a>
<p><hr>
-
<a name="ntpd-configfile"></a>Next: <a rel="next" accesskey="n" href="#ntpd-driftfile">ntpd driftfile</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-driftfile">ntpd driftfile</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-authnoreq">ntpd authnoreq</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">configfile option (-c)</h4>
This is the “configuration file name” option.
This option takes a string argument.
The name and path of the configuration file,
-<span class="file">/etc/ntp.conf</span>
+<samp><span class="file">/etc/ntp.conf</span></samp>
by default.
<div class="node">
+<a name="ntpd-driftfile"></a>
<p><hr>
-
<a name="ntpd-driftfile"></a>Next: <a rel="next" accesskey="n" href="#ntpd-panicgate">ntpd panicgate</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-panicgate">ntpd panicgate</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-configfile">ntpd configfile</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">driftfile option (-f)</h4>
This is the “frequency drift file name” option.
This option takes a string argument.
The name and path of the frequency file,
-<span class="file">/etc/ntp.drift</span>
+<samp><span class="file">/etc/ntp.drift</span></samp>
by default.
This is the same operation as the
<code>driftfile</code> <kbd>driftfile</kbd>
configuration specification in the
-<span class="file">/etc/ntp.conf</span>
+<samp><span class="file">/etc/ntp.conf</span></samp>
file.
<div class="node">
+<a name="ntpd-panicgate"></a>
<p><hr>
-
<a name="ntpd-panicgate"></a>Next: <a rel="next" accesskey="n" href="#ntpd-force_002dstep_002donce">ntpd force-step-once</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-force_002dstep_002donce">ntpd force-step-once</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-driftfile">ntpd driftfile</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">panicgate option (-g)</h4>
<code>tinker</code>
configuration file directive for other options.
<div class="node">
+<a name="ntpd-force-step-once"></a>
+<a name="ntpd-force_002dstep_002donce"></a>
<p><hr>
-
<a name="ntpd-force_002dstep_002donce"></a>Next: <a rel="next" accesskey="n" href="#ntpd-jaildir">ntpd jaildir</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-jaildir">ntpd jaildir</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-panicgate">ntpd panicgate</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">force-step-once option (-G)</h4>
applications requiring monotonic time are running.
See the <code>tinker</code> configuration file directive for other options.
<div class="node">
+<a name="ntpd-jaildir"></a>
<p><hr>
-
<a name="ntpd-jaildir"></a>Next: <a rel="next" accesskey="n" href="#ntpd-interface">ntpd interface</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-interface">ntpd interface</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-force_002dstep_002donce">ntpd force-step-once</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">jaildir option (-i)</h4>
<code>--enable-clockctl</code>) or Linux (configure with
<code>--enable-linuxcaps</code>) or Solaris (configure with <code>--enable-solarisprivs</code>).
<div class="node">
+<a name="ntpd-interface"></a>
<p><hr>
-
<a name="ntpd-interface"></a>Next: <a rel="next" accesskey="n" href="#ntpd-keyfile">ntpd keyfile</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-keyfile">ntpd keyfile</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-jaildir">ntpd jaildir</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">interface option (-I)</h4>
<p><a name="index-ntpd_002dinterface-13"></a>
This is the “listen on an interface name or address” option.
-This option takes a string argument <span class="file">iface</span>.
+This option takes a string argument <samp><span class="file">iface</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
This option is deprecated. Please consider using the configuration file
<code>interface</code> command, which is more versatile.
<div class="node">
+<a name="ntpd-keyfile"></a>
<p><hr>
-
<a name="ntpd-keyfile"></a>Next: <a rel="next" accesskey="n" href="#ntpd-logfile">ntpd logfile</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-logfile">ntpd logfile</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-interface">ntpd interface</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">keyfile option (-k)</h4>
This is the “path to symmetric keys” option.
This option takes a string argument.
Specify the name and path of the symmetric key file.
-<span class="file">/etc/ntp.keys</span>
+<samp><span class="file">/etc/ntp.keys</span></samp>
is the default.
This is the same operation as the
<code>keys</code> <kbd>keyfile</kbd>
configuration file directive.
<div class="node">
+<a name="ntpd-logfile"></a>
<p><hr>
-
<a name="ntpd-logfile"></a>Next: <a rel="next" accesskey="n" href="#ntpd-novirtualips">ntpd novirtualips</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-novirtualips">ntpd novirtualips</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-keyfile">ntpd keyfile</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">logfile option (-l)</h4>
<code>logfile</code> <kbd>logfile</kbd>
configuration file directive.
<div class="node">
+<a name="ntpd-novirtualips"></a>
<p><hr>
-
<a name="ntpd-novirtualips"></a>Next: <a rel="next" accesskey="n" href="#ntpd-modifymmtimer">ntpd modifymmtimer</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-modifymmtimer">ntpd modifymmtimer</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-logfile">ntpd logfile</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">novirtualips option (-L)</h4>
consider using the configuration file <code>interface</code> command, which
is more versatile.
<div class="node">
+<a name="ntpd-modifymmtimer"></a>
<p><hr>
-
<a name="ntpd-modifymmtimer"></a>Next: <a rel="next" accesskey="n" href="#ntpd-nice">ntpd nice</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-nice">ntpd nice</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-novirtualips">ntpd novirtualips</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">modifymmtimer option (-M)</h4>
ensures the resolution does not change while ntpd is running,
avoiding timekeeping glitches associated with changes.
<div class="node">
+<a name="ntpd-nice"></a>
<p><hr>
-
<a name="ntpd-nice"></a>Next: <a rel="next" accesskey="n" href="#ntpd-pidfile">ntpd pidfile</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-pidfile">ntpd pidfile</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-modifymmtimer">ntpd modifymmtimer</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">nice option (-N)</h4>
<code>ntpd</code>
at the highest priority.
<div class="node">
+<a name="ntpd-pidfile"></a>
<p><hr>
-
<a name="ntpd-pidfile"></a>Next: <a rel="next" accesskey="n" href="#ntpd-priority">ntpd priority</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-priority">ntpd priority</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-nice">ntpd nice</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">pidfile option (-p)</h4>
<code>pidfile</code> <kbd>pidfile</kbd>
configuration file directive.
<div class="node">
+<a name="ntpd-priority"></a>
<p><hr>
-
<a name="ntpd-priority"></a>Next: <a rel="next" accesskey="n" href="#ntpd-quit">ntpd quit</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-quit">ntpd quit</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-pidfile">ntpd pidfile</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">priority option (-P)</h4>
<code>sched_setscheduler(SCHED_FIFO)</code>
priority.
<div class="node">
+<a name="ntpd-quit"></a>
<p><hr>
-
<a name="ntpd-quit"></a>Next: <a rel="next" accesskey="n" href="#ntpd-propagationdelay">ntpd propagationdelay</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-propagationdelay">ntpd propagationdelay</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-priority">ntpd priority</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">quit option (-q)</h4>
options can be used with this option.
Note: The kernel time discipline is disabled with this option.
<div class="node">
+<a name="ntpd-propagationdelay"></a>
<p><hr>
-
<a name="ntpd-propagationdelay"></a>Next: <a rel="next" accesskey="n" href="#ntpd-saveconfigquit">ntpd saveconfigquit</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-saveconfigquit">ntpd saveconfigquit</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-quit">ntpd quit</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">propagationdelay option (-r)</h4>
This option takes a string argument.
Specify the default propagation delay from the broadcast/multicast server to this client. This is necessary only if the delay cannot be computed automatically by the protocol.
<div class="node">
+<a name="ntpd-saveconfigquit"></a>
<p><hr>
-
<a name="ntpd-saveconfigquit"></a>Next: <a rel="next" accesskey="n" href="#ntpd-statsdir">ntpd statsdir</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-statsdir">ntpd statsdir</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-propagationdelay">ntpd propagationdelay</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">saveconfigquit option</h4>
equivalent to the given filename and exit. This option was
designed for automated testing.
<div class="node">
+<a name="ntpd-statsdir"></a>
<p><hr>
-
<a name="ntpd-statsdir"></a>Next: <a rel="next" accesskey="n" href="#ntpd-trustedkey">ntpd trustedkey</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-trustedkey">ntpd trustedkey</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-saveconfigquit">ntpd saveconfigquit</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">statsdir option (-s)</h4>
<code>statsdir</code> <kbd>statsdir</kbd>
configuration file directive.
<div class="node">
+<a name="ntpd-trustedkey"></a>
<p><hr>
-
<a name="ntpd-trustedkey"></a>Next: <a rel="next" accesskey="n" href="#ntpd-user">ntpd user</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-user">ntpd user</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-statsdir">ntpd statsdir</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">trustedkey option (-t)</h4>
<p><a name="index-ntpd_002dtrustedkey-25"></a>
This is the “trusted key number” option.
-This option takes a string argument <span class="file">tkey</span>.
+This option takes a string argument <samp><span class="file">tkey</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
<p>Add the specified key number to the trusted key list.
<div class="node">
+<a name="ntpd-user"></a>
<p><hr>
-
<a name="ntpd-user"></a>Next: <a rel="next" accesskey="n" href="#ntpd-updateinterval">ntpd updateinterval</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-updateinterval">ntpd updateinterval</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-trustedkey">ntpd trustedkey</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">user option (-u)</h4>
<code>--enable-clockctl</code>) or Linux (configure with
<code>--enable-linuxcaps</code>) or Solaris (configure with <code>--enable-solarisprivs</code>).
<div class="node">
+<a name="ntpd-updateinterval"></a>
<p><hr>
-
<a name="ntpd-updateinterval"></a>Next: <a rel="next" accesskey="n" href="#ntpd-wait_002dsync">ntpd wait-sync</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-wait_002dsync">ntpd wait-sync</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-user">ntpd user</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">updateinterval option (-U)</h4>
has been detected by the system.
Use 0 to disable scanning. 60 seconds is the minimum time between scans.
<div class="node">
+<a name="ntpd-wait-sync"></a>
+<a name="ntpd-wait_002dsync"></a>
<p><hr>
-
<a name="ntpd-wait_002dsync"></a>Next: <a rel="next" accesskey="n" href="#ntpd-slew">ntpd slew</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-slew">ntpd slew</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-updateinterval">ntpd updateinterval</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">wait-sync option (-w)</h4>
This provides the option for a script starting <code>ntpd</code> to easily
wait for the first set of the clock before proceeding.
<div class="node">
+<a name="ntpd-slew"></a>
<p><hr>
-
<a name="ntpd-slew"></a>Next: <a rel="next" accesskey="n" href="#ntpd-usepcc">ntpd usepcc</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-usepcc">ntpd usepcc</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-wait_002dsync">ntpd wait-sync</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">slew option (-x)</h4>
configuration file directive for other options.
Note: The kernel time discipline is disabled with this option.
<div class="node">
+<a name="ntpd-usepcc"></a>
<p><hr>
-
<a name="ntpd-usepcc"></a>Next: <a rel="next" accesskey="n" href="#ntpd-pccfreq">ntpd pccfreq</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-pccfreq">ntpd pccfreq</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-slew">ntpd slew</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">usepcc option</h4>
they have the same frequency, the CPU counter (RDTSC on x86) is
used directly, saving the overhead of a system call.
<div class="node">
+<a name="ntpd-pccfreq"></a>
<p><hr>
-
<a name="ntpd-pccfreq"></a>Next: <a rel="next" accesskey="n" href="#ntpd-mdns">ntpd mdns</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-mdns">ntpd mdns</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-usepcc">ntpd usepcc</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">pccfreq option</h4>
The CPU counter (RDTSC on x86) is used unconditionally with the
given frequency (in Hz).
<div class="node">
+<a name="ntpd-mdns"></a>
<p><hr>
-
<a name="ntpd-mdns"></a>Next: <a rel="next" accesskey="n" href="#ntpd-config">ntpd config</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-config">ntpd config</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-pccfreq">ntpd pccfreq</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">mdns option (-m)</h4>
the server to be discovered via mDNS client lookup.
<div class="node">
+<a name="ntpd-config"></a>
<p><hr>
-
<a name="ntpd-config"></a>Next: <a rel="next" accesskey="n" href="#ntpd-exit-status">ntpd exit status</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-exit-status">ntpd exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-mdns">ntpd mdns</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">presetting/configuring ntpd</h4>
Only the first letter of the argument is examined:
<dl>
-<dt><span class="samp">version</span><dd>Only print the version. This is the default.
-<br><dt><span class="samp">copyright</span><dd>Name the copyright usage licensing terms.
-<br><dt><span class="samp">verbose</span><dd>Print the full copyright usage licensing terms.
+<dt>‘<samp><span class="samp">version</span></samp>’<dd>Only print the version. This is the default.
+<br><dt>‘<samp><span class="samp">copyright</span></samp>’<dd>Name the copyright usage licensing terms.
+<br><dt>‘<samp><span class="samp">verbose</span></samp>’<dd>Print the full copyright usage licensing terms.
</dl>
<div class="node">
+<a name="ntpd-exit-status"></a>
<p><hr>
-
<a name="ntpd-exit-status"></a>Next: <a rel="next" accesskey="n" href="#ntpd-Usage">ntpd Usage</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-Usage">ntpd Usage</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-config">ntpd config</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpd exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
</dl>
<div class="node">
+<a name="ntpd-Usage"></a>
<p><hr>
-
<a name="ntpd-Usage"></a>Next: <a rel="next" accesskey="n" href="#ntpd-Files">ntpd Files</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-Files">ntpd Files</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-exit-status">ntpd exit status</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpd Usage</h4>
<div class="node">
+<a name="ntpd-Files"></a>
<p><hr>
-
<a name="ntpd-Files"></a>Next: <a rel="next" accesskey="n" href="#ntpd-See-Also">ntpd See Also</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-See-Also">ntpd See Also</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-Usage">ntpd Usage</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpd Files</h4>
<div class="node">
+<a name="ntpd-See-Also"></a>
<p><hr>
-
<a name="ntpd-See-Also"></a>Next: <a rel="next" accesskey="n" href="#ntpd-Bugs">ntpd Bugs</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-Bugs">ntpd Bugs</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-Files">ntpd Files</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpd See Also</h4>
<div class="node">
+<a name="ntpd-Bugs"></a>
<p><hr>
-
<a name="ntpd-Bugs"></a>Next: <a rel="next" accesskey="n" href="#ntpd-Notes">ntpd Notes</a>,
+Next: <a rel="next" accesskey="n" href="#ntpd-Notes">ntpd Notes</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpd-See-Also">ntpd See Also</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpd Bugs</h4>
<div class="node">
+<a name="ntpd-Notes"></a>
<p><hr>
-
<a name="ntpd-Notes"></a>Previous: <a rel="previous" accesskey="p" href="#ntpd-Bugs">ntpd Bugs</a>,
+Previous: <a rel="previous" accesskey="p" href="#ntpd-Bugs">ntpd Bugs</a>,
Up: <a rel="up" accesskey="u" href="#ntpd-Invocation">ntpd Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpd Notes</h4>
<div class="node">
-<p><hr>
<a name="Usage"></a>
-<br>
+<p><hr>
+
+
</div>
<!-- node-name, next, previous, up -->
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpd @NTPD_MS@ "06 Oct 2015" "4.2.8p4-RC1" "User Commands"
+.TH ntpd @NTPD_MS@ "17 Oct 2015" "4.2.8p4-sec-RC2" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-XGaqiB/ag-sHaihB)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:06:33 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:35 AM by AutoGen 5.18.5
.\" From the definitions ntpd-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPD @NTPD_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpd-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:07:13 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:24 AM by AutoGen 5.18.5
.\" From the definitions ntpd-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntpdc.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 06:07:53 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:24:54 AM by AutoGen 5.18.5
# From the definitions ntpdc-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p4-RC1
+ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p4-sec-RC2
Usage: ntpdc [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [ host ...]
Flg Arg Option-Name Description
-4 no ipv4 Force IPv4 DNS name resolution
/*
* EDIT THIS FILE WITH CAUTION (ntpdc-opts.c)
*
- * It has been AutoGen-ed October 6, 2015 at 06:07:31 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:24:41 AM by AutoGen 5.18.5
* From the definitions ntpdc-opts.def
* and the template file options
*
#endif
extern FILE * option_usage_fp;
#define zCopyright (ntpdc_opt_strs+0)
-#define zLicenseDescrip (ntpdc_opt_strs+345)
+#define zLicenseDescrip (ntpdc_opt_strs+349)
/*
* global included definitions
/**
* static const strings for ntpdc options
*/
-static char const ntpdc_opt_strs[1923] =
-/* 0 */ "ntpdc 4.2.8p4-RC1\n"
+static char const ntpdc_opt_strs[1935] =
+/* 0 */ "ntpdc 4.2.8p4-sec-RC2\n"
"Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
"can be seen at:\n"
" <http://ntp.org/license>\n"
" <http://opensource.org/licenses/ntp-license.php>\n\0"
-/* 345 */ "Permission to use, copy, modify, and distribute this software and its\n"
+/* 349 */ "Permission to use, copy, modify, and distribute this software and its\n"
"documentation for any purpose with or without fee is hereby granted,\n"
"provided that the above copyright notice appears in all copies and that\n"
"both the copyright notice and this permission notice appear in supporting\n"
"Time Foundation makes no representations about the suitability this\n"
"software for any purpose. It is provided \"as is\" without express or\n"
"implied warranty.\n\0"
-/* 1013 */ "Force IPv4 DNS name resolution\0"
-/* 1044 */ "IPV4\0"
-/* 1049 */ "ipv4\0"
-/* 1054 */ "Force IPv6 DNS name resolution\0"
-/* 1085 */ "IPV6\0"
-/* 1090 */ "ipv6\0"
-/* 1095 */ "run a command and exit\0"
-/* 1118 */ "COMMAND\0"
-/* 1126 */ "command\0"
-/* 1134 */ "Increase debug verbosity level\0"
-/* 1165 */ "DEBUG_LEVEL\0"
-/* 1177 */ "debug-level\0"
-/* 1189 */ "Set the debug verbosity level\0"
-/* 1219 */ "SET_DEBUG_LEVEL\0"
-/* 1235 */ "set-debug-level\0"
-/* 1251 */ "Force ntpq to operate in interactive mode\0"
-/* 1293 */ "INTERACTIVE\0"
-/* 1305 */ "interactive\0"
-/* 1317 */ "Print a list of the peers\0"
-/* 1343 */ "LISTPEERS\0"
-/* 1353 */ "listpeers\0"
-/* 1363 */ "numeric host addresses\0"
-/* 1386 */ "NUMERIC\0"
-/* 1394 */ "numeric\0"
-/* 1402 */ "PEERS\0"
-/* 1408 */ "peers\0"
-/* 1414 */ "Show a list of the peers\0"
-/* 1439 */ "SHOWPEERS\0"
-/* 1449 */ "showpeers\0"
-/* 1459 */ "display extended usage information and exit\0"
-/* 1503 */ "help\0"
-/* 1508 */ "extended usage information passed thru pager\0"
-/* 1553 */ "more-help\0"
-/* 1563 */ "output version information and exit\0"
-/* 1599 */ "version\0"
-/* 1607 */ "save the option state to a config file\0"
-/* 1646 */ "save-opts\0"
-/* 1656 */ "load options from a config file\0"
-/* 1688 */ "LOAD_OPTS\0"
-/* 1698 */ "no-load-opts\0"
-/* 1711 */ "no\0"
-/* 1714 */ "NTPDC\0"
-/* 1720 */ "ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p4-RC1\n"
+/* 1017 */ "Force IPv4 DNS name resolution\0"
+/* 1048 */ "IPV4\0"
+/* 1053 */ "ipv4\0"
+/* 1058 */ "Force IPv6 DNS name resolution\0"
+/* 1089 */ "IPV6\0"
+/* 1094 */ "ipv6\0"
+/* 1099 */ "run a command and exit\0"
+/* 1122 */ "COMMAND\0"
+/* 1130 */ "command\0"
+/* 1138 */ "Increase debug verbosity level\0"
+/* 1169 */ "DEBUG_LEVEL\0"
+/* 1181 */ "debug-level\0"
+/* 1193 */ "Set the debug verbosity level\0"
+/* 1223 */ "SET_DEBUG_LEVEL\0"
+/* 1239 */ "set-debug-level\0"
+/* 1255 */ "Force ntpq to operate in interactive mode\0"
+/* 1297 */ "INTERACTIVE\0"
+/* 1309 */ "interactive\0"
+/* 1321 */ "Print a list of the peers\0"
+/* 1347 */ "LISTPEERS\0"
+/* 1357 */ "listpeers\0"
+/* 1367 */ "numeric host addresses\0"
+/* 1390 */ "NUMERIC\0"
+/* 1398 */ "numeric\0"
+/* 1406 */ "PEERS\0"
+/* 1412 */ "peers\0"
+/* 1418 */ "Show a list of the peers\0"
+/* 1443 */ "SHOWPEERS\0"
+/* 1453 */ "showpeers\0"
+/* 1463 */ "display extended usage information and exit\0"
+/* 1507 */ "help\0"
+/* 1512 */ "extended usage information passed thru pager\0"
+/* 1557 */ "more-help\0"
+/* 1567 */ "output version information and exit\0"
+/* 1603 */ "version\0"
+/* 1611 */ "save the option state to a config file\0"
+/* 1650 */ "save-opts\0"
+/* 1660 */ "load options from a config file\0"
+/* 1692 */ "LOAD_OPTS\0"
+/* 1702 */ "no-load-opts\0"
+/* 1715 */ "no\0"
+/* 1718 */ "NTPDC\0"
+/* 1724 */ "ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p4-sec-RC2\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]\n\0"
-/* 1854 */ "$HOME\0"
-/* 1860 */ ".\0"
-/* 1862 */ ".ntprc\0"
-/* 1869 */ "http://bugs.ntp.org, bugs@ntp.org\0"
-/* 1903 */ "\n\0"
-/* 1905 */ "ntpdc 4.2.8p4-RC1";
+/* 1862 */ "$HOME\0"
+/* 1868 */ ".\0"
+/* 1870 */ ".ntprc\0"
+/* 1877 */ "http://bugs.ntp.org, bugs@ntp.org\0"
+/* 1911 */ "\n\0"
+/* 1913 */ "ntpdc 4.2.8p4-sec-RC2";
/**
* ipv4 option description with
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the ipv4 option */
-#define IPV4_DESC (ntpdc_opt_strs+1013)
+#define IPV4_DESC (ntpdc_opt_strs+1017)
/** Upper-cased name for the ipv4 option */
-#define IPV4_NAME (ntpdc_opt_strs+1044)
+#define IPV4_NAME (ntpdc_opt_strs+1048)
/** Name string for the ipv4 option */
-#define IPV4_name (ntpdc_opt_strs+1049)
+#define IPV4_name (ntpdc_opt_strs+1053)
/** Other options that appear in conjunction with the ipv4 option */
static int const aIpv4CantList[] = {
INDEX_OPT_IPV6, NO_EQUIVALENT };
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the ipv6 option */
-#define IPV6_DESC (ntpdc_opt_strs+1054)
+#define IPV6_DESC (ntpdc_opt_strs+1058)
/** Upper-cased name for the ipv6 option */
-#define IPV6_NAME (ntpdc_opt_strs+1085)
+#define IPV6_NAME (ntpdc_opt_strs+1089)
/** Name string for the ipv6 option */
-#define IPV6_name (ntpdc_opt_strs+1090)
+#define IPV6_name (ntpdc_opt_strs+1094)
/** Other options that appear in conjunction with the ipv6 option */
static int const aIpv6CantList[] = {
INDEX_OPT_IPV4, NO_EQUIVALENT };
* command option description:
*/
/** Descriptive text for the command option */
-#define COMMAND_DESC (ntpdc_opt_strs+1095)
+#define COMMAND_DESC (ntpdc_opt_strs+1099)
/** Upper-cased name for the command option */
-#define COMMAND_NAME (ntpdc_opt_strs+1118)
+#define COMMAND_NAME (ntpdc_opt_strs+1122)
/** Name string for the command option */
-#define COMMAND_name (ntpdc_opt_strs+1126)
+#define COMMAND_name (ntpdc_opt_strs+1130)
/** Compiled in flag settings for the command option */
#define COMMAND_FLAGS (OPTST_DISABLED | OPTST_STACKED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* debug-level option description:
*/
/** Descriptive text for the debug-level option */
-#define DEBUG_LEVEL_DESC (ntpdc_opt_strs+1134)
+#define DEBUG_LEVEL_DESC (ntpdc_opt_strs+1138)
/** Upper-cased name for the debug-level option */
-#define DEBUG_LEVEL_NAME (ntpdc_opt_strs+1165)
+#define DEBUG_LEVEL_NAME (ntpdc_opt_strs+1169)
/** Name string for the debug-level option */
-#define DEBUG_LEVEL_name (ntpdc_opt_strs+1177)
+#define DEBUG_LEVEL_name (ntpdc_opt_strs+1181)
/** Compiled in flag settings for the debug-level option */
#define DEBUG_LEVEL_FLAGS (OPTST_DISABLED)
* set-debug-level option description:
*/
/** Descriptive text for the set-debug-level option */
-#define SET_DEBUG_LEVEL_DESC (ntpdc_opt_strs+1189)
+#define SET_DEBUG_LEVEL_DESC (ntpdc_opt_strs+1193)
/** Upper-cased name for the set-debug-level option */
-#define SET_DEBUG_LEVEL_NAME (ntpdc_opt_strs+1219)
+#define SET_DEBUG_LEVEL_NAME (ntpdc_opt_strs+1223)
/** Name string for the set-debug-level option */
-#define SET_DEBUG_LEVEL_name (ntpdc_opt_strs+1235)
+#define SET_DEBUG_LEVEL_name (ntpdc_opt_strs+1239)
/** Compiled in flag settings for the set-debug-level option */
#define SET_DEBUG_LEVEL_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the interactive option */
-#define INTERACTIVE_DESC (ntpdc_opt_strs+1251)
+#define INTERACTIVE_DESC (ntpdc_opt_strs+1255)
/** Upper-cased name for the interactive option */
-#define INTERACTIVE_NAME (ntpdc_opt_strs+1293)
+#define INTERACTIVE_NAME (ntpdc_opt_strs+1297)
/** Name string for the interactive option */
-#define INTERACTIVE_name (ntpdc_opt_strs+1305)
+#define INTERACTIVE_name (ntpdc_opt_strs+1309)
/** Other options that appear in conjunction with the interactive option */
static int const aInteractiveCantList[] = {
INDEX_OPT_COMMAND,
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the listpeers option */
-#define LISTPEERS_DESC (ntpdc_opt_strs+1317)
+#define LISTPEERS_DESC (ntpdc_opt_strs+1321)
/** Upper-cased name for the listpeers option */
-#define LISTPEERS_NAME (ntpdc_opt_strs+1343)
+#define LISTPEERS_NAME (ntpdc_opt_strs+1347)
/** Name string for the listpeers option */
-#define LISTPEERS_name (ntpdc_opt_strs+1353)
+#define LISTPEERS_name (ntpdc_opt_strs+1357)
/** Other options that appear in conjunction with the listpeers option */
static int const aListpeersCantList[] = {
INDEX_OPT_COMMAND, NO_EQUIVALENT };
* numeric option description:
*/
/** Descriptive text for the numeric option */
-#define NUMERIC_DESC (ntpdc_opt_strs+1363)
+#define NUMERIC_DESC (ntpdc_opt_strs+1367)
/** Upper-cased name for the numeric option */
-#define NUMERIC_NAME (ntpdc_opt_strs+1386)
+#define NUMERIC_NAME (ntpdc_opt_strs+1390)
/** Name string for the numeric option */
-#define NUMERIC_name (ntpdc_opt_strs+1394)
+#define NUMERIC_name (ntpdc_opt_strs+1398)
/** Compiled in flag settings for the numeric option */
#define NUMERIC_FLAGS (OPTST_DISABLED)
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the peers option */
-#define PEERS_DESC (ntpdc_opt_strs+1317)
+#define PEERS_DESC (ntpdc_opt_strs+1321)
/** Upper-cased name for the peers option */
-#define PEERS_NAME (ntpdc_opt_strs+1402)
+#define PEERS_NAME (ntpdc_opt_strs+1406)
/** Name string for the peers option */
-#define PEERS_name (ntpdc_opt_strs+1408)
+#define PEERS_name (ntpdc_opt_strs+1412)
/** Other options that appear in conjunction with the peers option */
static int const aPeersCantList[] = {
INDEX_OPT_COMMAND, NO_EQUIVALENT };
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the showpeers option */
-#define SHOWPEERS_DESC (ntpdc_opt_strs+1414)
+#define SHOWPEERS_DESC (ntpdc_opt_strs+1418)
/** Upper-cased name for the showpeers option */
-#define SHOWPEERS_NAME (ntpdc_opt_strs+1439)
+#define SHOWPEERS_NAME (ntpdc_opt_strs+1443)
/** Name string for the showpeers option */
-#define SHOWPEERS_name (ntpdc_opt_strs+1449)
+#define SHOWPEERS_name (ntpdc_opt_strs+1453)
/** Other options that appear in conjunction with the showpeers option */
static int const aShowpeersCantList[] = {
INDEX_OPT_COMMAND, NO_EQUIVALENT };
/*
* Help/More_Help/Version option descriptions:
*/
-#define HELP_DESC (ntpdc_opt_strs+1459)
-#define HELP_name (ntpdc_opt_strs+1503)
+#define HELP_DESC (ntpdc_opt_strs+1463)
+#define HELP_name (ntpdc_opt_strs+1507)
#ifdef HAVE_WORKING_FORK
-#define MORE_HELP_DESC (ntpdc_opt_strs+1508)
-#define MORE_HELP_name (ntpdc_opt_strs+1553)
+#define MORE_HELP_DESC (ntpdc_opt_strs+1512)
+#define MORE_HELP_name (ntpdc_opt_strs+1557)
#define MORE_HELP_FLAGS (OPTST_IMM | OPTST_NO_INIT)
#else
#define MORE_HELP_DESC HELP_DESC
# define VER_FLAGS (OPTST_SET_ARGTYPE(OPARG_TYPE_STRING) | \
OPTST_ARG_OPTIONAL | OPTST_IMM | OPTST_NO_INIT)
#endif
-#define VER_DESC (ntpdc_opt_strs+1563)
-#define VER_name (ntpdc_opt_strs+1599)
-#define SAVE_OPTS_DESC (ntpdc_opt_strs+1607)
-#define SAVE_OPTS_name (ntpdc_opt_strs+1646)
-#define LOAD_OPTS_DESC (ntpdc_opt_strs+1656)
-#define LOAD_OPTS_NAME (ntpdc_opt_strs+1688)
-#define NO_LOAD_OPTS_name (ntpdc_opt_strs+1698)
-#define LOAD_OPTS_pfx (ntpdc_opt_strs+1711)
+#define VER_DESC (ntpdc_opt_strs+1567)
+#define VER_name (ntpdc_opt_strs+1603)
+#define SAVE_OPTS_DESC (ntpdc_opt_strs+1611)
+#define SAVE_OPTS_name (ntpdc_opt_strs+1650)
+#define LOAD_OPTS_DESC (ntpdc_opt_strs+1660)
+#define LOAD_OPTS_NAME (ntpdc_opt_strs+1692)
+#define NO_LOAD_OPTS_name (ntpdc_opt_strs+1702)
+#define LOAD_OPTS_pfx (ntpdc_opt_strs+1715)
#define LOAD_OPTS_name (NO_LOAD_OPTS_name + 3)
/**
* Declare option callback procedures
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/** Reference to the upper cased version of ntpdc. */
-#define zPROGNAME (ntpdc_opt_strs+1714)
+#define zPROGNAME (ntpdc_opt_strs+1718)
/** Reference to the title line for ntpdc usage. */
-#define zUsageTitle (ntpdc_opt_strs+1720)
+#define zUsageTitle (ntpdc_opt_strs+1724)
/** ntpdc configuration file name. */
-#define zRcName (ntpdc_opt_strs+1862)
+#define zRcName (ntpdc_opt_strs+1870)
/** Directories to search for ntpdc config files. */
static char const * const apzHomeList[3] = {
- ntpdc_opt_strs+1854,
- ntpdc_opt_strs+1860,
+ ntpdc_opt_strs+1862,
+ ntpdc_opt_strs+1868,
NULL };
/** The ntpdc program bug email address. */
-#define zBugsAddr (ntpdc_opt_strs+1869)
+#define zBugsAddr (ntpdc_opt_strs+1877)
/** Clarification/explanation of what ntpdc does. */
-#define zExplain (ntpdc_opt_strs+1903)
+#define zExplain (ntpdc_opt_strs+1911)
/** Extra detail explaining what ntpdc does. */
#define zDetail (NULL)
/** The full version string for ntpdc. */
-#define zFullVersion (ntpdc_opt_strs+1905)
+#define zFullVersion (ntpdc_opt_strs+1913)
/* extracted from optcode.tlib near line 364 */
#if defined(ENABLE_NLS)
translate option names.
*/
/* referenced via ntpdcOptions.pzCopyright */
- puts(_("ntpdc 4.2.8p4-RC1\n\
+ puts(_("ntpdc 4.2.8p4-sec-RC2\n\
Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("load options from a config file"));
/* referenced via ntpdcOptions.pzUsageTitle */
- puts(_("ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p4-RC1\n\
+ puts(_("ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p4-sec-RC2\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]\n"));
/* referenced via ntpdcOptions.pzExplain */
puts(_("\n"));
/* referenced via ntpdcOptions.pzFullVersion */
- puts(_("ntpdc 4.2.8p4-RC1"));
+ puts(_("ntpdc 4.2.8p4-sec-RC2"));
/* referenced via ntpdcOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (ntpdc-opts.h)
*
- * It has been AutoGen-ed October 6, 2015 at 06:07:30 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:24:41 AM by AutoGen 5.18.5
* From the definitions ntpdc-opts.def
* and the template file options
*
/** count of all options for ntpdc */
#define OPTION_CT 15
/** ntpdc version */
-#define NTPDC_VERSION "4.2.8p4-RC1"
+#define NTPDC_VERSION "4.2.8p4-sec-RC2"
/** Full ntpdc version text */
-#define NTPDC_FULL_VERSION "ntpdc 4.2.8p4-RC1"
+#define NTPDC_FULL_VERSION "ntpdc 4.2.8p4-sec-RC2"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpdc 1ntpdcman "06 Oct 2015" "4.2.8p4-RC1" "User Commands"
+.TH ntpdc 1ntpdcman "17 Oct 2015" "4.2.8p4-sec-RC2" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-aTai.C/ag-qTaa9C)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:07:47 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:55 AM by AutoGen 5.18.5
.\" From the definitions ntpdc-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPDC 1ntpdcmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpdc-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:07:57 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:51 AM by AutoGen 5.18.5
.\" From the definitions ntpdc-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>ntpdc: NTPD Control User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="ntpdc: NTPD Control User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">ntpdc: NTPD Control User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-Description">ntpdc Description</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-Description">ntpdc Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">ntpdc: NTPD Control User Manual</h2>
clock. Run as root, it can correct the system clock to this offset as
well. It can be run as an interactive command or from a cron job.
- <p>This document applies to version 4.2.8p4-RC1 of <code>ntpdc</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>ntpdc</code>.
<p>The program implements the SNTP protocol as defined by RFC 5905, the NTPv4
IETF specification.
</ul>
<div class="node">
-<p><hr>
<a name="ntpdc-Description"></a>
-<br>
+<p><hr>
+
+
</div>
<!-- node-name, next, previous, up -->
error bound of the system clock relative to the server clock.
<div class="node">
-<p><hr>
<a name="ntpdc-Invocation"></a>
-<br>
+<p><hr>
+
+
</div>
<h3 class="section">Invoking ntpdc</h3>
This software is released under the NTP license, <http://ntp.org/license>.
<ul class="menu">
-<li><a accesskey="1" href="#ntpdc-usage">ntpdc usage</a>: ntpdc help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#ntpdc-usage">ntpdc usage</a>: ntpdc help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#ntpdc-ipv4">ntpdc ipv4</a>: ipv4 option (-4)
<li><a accesskey="3" href="#ntpdc-ipv6">ntpdc ipv6</a>: ipv6 option (-6)
<li><a accesskey="4" href="#ntpdc-command">ntpdc command</a>: command option (-c)
</ul>
<div class="node">
+<a name="ntpdc-usage"></a>
<p><hr>
-
<a name="ntpdc-usage"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-ipv4">ntpdc ipv4</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-ipv4">ntpdc ipv4</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">ntpdc help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">ntpdc help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-ntpdc-help-3"></a>
This is the automatically generated usage text for ntpdc.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
-<pre class="example">ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p4-RC1
+<pre class="example">ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p4-sec-RC2
Usage: ntpdc [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]
Flg Arg Option-Name Description
-4 no ipv4 Force IPv4 DNS name resolution
Please send bug reports to: <http://bugs.ntp.org, bugs@ntp.org>
</pre>
<div class="node">
+<a name="ntpdc-ipv4"></a>
<p><hr>
-
<a name="ntpdc-ipv4"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-ipv6">ntpdc ipv6</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-ipv6">ntpdc ipv6</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-usage">ntpdc usage</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ipv4 option (-4)</h4>
<p>Force DNS resolution of following host names on the command line
to the IPv4 namespace.
<div class="node">
+<a name="ntpdc-ipv6"></a>
<p><hr>
-
<a name="ntpdc-ipv6"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-command">ntpdc command</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-command">ntpdc command</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-ipv4">ntpdc ipv4</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ipv6 option (-6)</h4>
<p>Force DNS resolution of following host names on the command line
to the IPv6 namespace.
<div class="node">
+<a name="ntpdc-command"></a>
<p><hr>
-
<a name="ntpdc-command"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-interactive">ntpdc interactive</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-interactive">ntpdc interactive</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-ipv6">ntpdc ipv6</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">command option (-c)</h4>
<p><a name="index-ntpdc_002dcommand-6"></a>
This is the “run a command and exit” option.
-This option takes a string argument <span class="file">cmd</span>.
+This option takes a string argument <samp><span class="file">cmd</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
and is added to the list of commands to be executed on the specified
host(s).
<div class="node">
+<a name="ntpdc-interactive"></a>
<p><hr>
-
<a name="ntpdc-interactive"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-listpeers">ntpdc listpeers</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-listpeers">ntpdc listpeers</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-command">ntpdc command</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">interactive option (-i)</h4>
<p>Force ntpq to operate in interactive mode. Prompts will be written
to the standard output and commands read from the standard input.
<div class="node">
+<a name="ntpdc-listpeers"></a>
<p><hr>
-
<a name="ntpdc-listpeers"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-numeric">ntpdc numeric</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-numeric">ntpdc numeric</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-interactive">ntpdc interactive</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">listpeers option (-l)</h4>
<p>Print a list of the peers known to the server as well as a summary of
their state. This is equivalent to the 'listpeers' interactive command.
<div class="node">
+<a name="ntpdc-numeric"></a>
<p><hr>
-
<a name="ntpdc-numeric"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-peers">ntpdc peers</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-peers">ntpdc peers</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-listpeers">ntpdc listpeers</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">numeric option (-n)</h4>
Output all host addresses in dotted-quad numeric format rather than
converting to the canonical host names.
<div class="node">
+<a name="ntpdc-peers"></a>
<p><hr>
-
<a name="ntpdc-peers"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-showpeers">ntpdc showpeers</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-showpeers">ntpdc showpeers</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-numeric">ntpdc numeric</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">peers option (-p)</h4>
<p>Print a list of the peers known to the server as well as a summary
of their state. This is equivalent to the 'peers' interactive command.
<div class="node">
+<a name="ntpdc-showpeers"></a>
<p><hr>
-
<a name="ntpdc-showpeers"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-config">ntpdc config</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-config">ntpdc config</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-peers">ntpdc peers</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">showpeers option (-s)</h4>
of their state. This is equivalent to the 'dmpeers' interactive command.
<div class="node">
+<a name="ntpdc-config"></a>
<p><hr>
-
<a name="ntpdc-config"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-exit-status">ntpdc exit status</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-exit-status">ntpdc exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-showpeers">ntpdc showpeers</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">presetting/configuring ntpdc</h4>
<li>$PWD
</ul>
The environment variables <code>HOME</code>, and <code>PWD</code>
-are expanded and replaced when <span class="file">ntpdc</span> runs.
+are expanded and replaced when <samp><span class="file">ntpdc</span></samp> runs.
For any of these that are plain files, they are simply processed.
-For any that are directories, then a file named <span class="file">.ntprc</span> is searched for
+For any that are directories, then a file named <samp><span class="file">.ntprc</span></samp> is searched for
within that directory and processed.
<p>Configuration files may be in a wide variety of formats.
Only the first letter of the argument is examined:
<dl>
-<dt><span class="samp">version</span><dd>Only print the version. This is the default.
-<br><dt><span class="samp">copyright</span><dd>Name the copyright usage licensing terms.
-<br><dt><span class="samp">verbose</span><dd>Print the full copyright usage licensing terms.
+<dt>‘<samp><span class="samp">version</span></samp>’<dd>Only print the version. This is the default.
+<br><dt>‘<samp><span class="samp">copyright</span></samp>’<dd>Name the copyright usage licensing terms.
+<br><dt>‘<samp><span class="samp">verbose</span></samp>’<dd>Print the full copyright usage licensing terms.
</dl>
<div class="node">
+<a name="ntpdc-exit-status"></a>
<p><hr>
-
<a name="ntpdc-exit-status"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-Usage">ntpdc Usage</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-Usage">ntpdc Usage</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-config">ntpdc config</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpdc exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
-<br><dt><span class="samp">66 (EX_NOINPUT)</span><dd>A specified configuration file could not be loaded.
-<br><dt><span class="samp">70 (EX_SOFTWARE)</span><dd>libopts had an internal operational error. Please report
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
+<br><dt>‘<samp><span class="samp">66 (EX_NOINPUT)</span></samp>’<dd>A specified configuration file could not be loaded.
+<br><dt>‘<samp><span class="samp">70 (EX_SOFTWARE)</span></samp>’<dd>libopts had an internal operational error. Please report
it to autogen-users@lists.sourceforge.net. Thank you.
</dl>
<div class="node">
+<a name="ntpdc-Usage"></a>
<p><hr>
-
<a name="ntpdc-Usage"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-See-Also">ntpdc See Also</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-See-Also">ntpdc See Also</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-exit-status">ntpdc exit status</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpdc Usage</h4>
<div class="node">
+<a name="ntpdc-See-Also"></a>
<p><hr>
-
<a name="ntpdc-See-Also"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-Authors">ntpdc Authors</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-Authors">ntpdc Authors</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-Usage">ntpdc Usage</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpdc See Also</h4>
<div class="node">
+<a name="ntpdc-Authors"></a>
<p><hr>
-
<a name="ntpdc-Authors"></a>Next: <a rel="next" accesskey="n" href="#ntpdc-Bugs">ntpdc Bugs</a>,
+Next: <a rel="next" accesskey="n" href="#ntpdc-Bugs">ntpdc Bugs</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpdc-See-Also">ntpdc See Also</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpdc Authors</h4>
<div class="node">
+<a name="ntpdc-Bugs"></a>
<p><hr>
-
<a name="ntpdc-Bugs"></a>Previous: <a rel="previous" accesskey="p" href="#ntpdc-Authors">ntpdc Authors</a>,
+Previous: <a rel="previous" accesskey="p" href="#ntpdc-Authors">ntpdc Authors</a>,
Up: <a rel="up" accesskey="u" href="#ntpdc-Invocation">ntpdc Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpdc Bugs</h4>
<div class="node">
-<p><hr>
<a name="Usage"></a>
-<br>
+<p><hr>
+
+
</div>
<!-- node-name, next, previous, up -->
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpdc @NTPDC_MS@ "06 Oct 2015" "4.2.8p4-RC1" "User Commands"
+.TH ntpdc @NTPDC_MS@ "17 Oct 2015" "4.2.8p4-sec-RC2" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-aTai.C/ag-qTaa9C)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:07:47 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:55 AM by AutoGen 5.18.5
.\" From the definitions ntpdc-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPDC @NTPDC_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpdc-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:07:57 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:24:51 AM by AutoGen 5.18.5
.\" From the definitions ntpdc-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntpq.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 06:10:26 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:25:38 AM by AutoGen 5.18.5
# From the definitions ntpq-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntpq - standard NTP query program - Ver. 4.2.8p4-RC1
+ntpq - standard NTP query program - Ver. 4.2.8p4-sec-RC2
Usage: ntpq [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [ host ...]
Flg Arg Option-Name Description
-4 no ipv4 Force IPv4 DNS name resolution
/*
* EDIT THIS FILE WITH CAUTION (ntpq-opts.c)
*
- * It has been AutoGen-ed October 6, 2015 at 06:08:04 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:24:57 AM by AutoGen 5.18.5
* From the definitions ntpq-opts.def
* and the template file options
*
#endif
extern FILE * option_usage_fp;
#define zCopyright (ntpq_opt_strs+0)
-#define zLicenseDescrip (ntpq_opt_strs+344)
+#define zLicenseDescrip (ntpq_opt_strs+348)
/*
* global included definitions
/**
* static const strings for ntpq options
*/
-static char const ntpq_opt_strs[1937] =
-/* 0 */ "ntpq 4.2.8p4-RC1\n"
+static char const ntpq_opt_strs[1949] =
+/* 0 */ "ntpq 4.2.8p4-sec-RC2\n"
"Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
"can be seen at:\n"
" <http://ntp.org/license>\n"
" <http://opensource.org/licenses/ntp-license.php>\n\0"
-/* 344 */ "Permission to use, copy, modify, and distribute this software and its\n"
+/* 348 */ "Permission to use, copy, modify, and distribute this software and its\n"
"documentation for any purpose with or without fee is hereby granted,\n"
"provided that the above copyright notice appears in all copies and that\n"
"both the copyright notice and this permission notice appear in supporting\n"
"Time Foundation makes no representations about the suitability this\n"
"software for any purpose. It is provided \"as is\" without express or\n"
"implied warranty.\n\0"
-/* 1012 */ "Force IPv4 DNS name resolution\0"
-/* 1043 */ "IPV4\0"
-/* 1048 */ "ipv4\0"
-/* 1053 */ "Force IPv6 DNS name resolution\0"
-/* 1084 */ "IPV6\0"
-/* 1089 */ "ipv6\0"
-/* 1094 */ "run a command and exit\0"
-/* 1117 */ "COMMAND\0"
-/* 1125 */ "command\0"
-/* 1133 */ "Increase debug verbosity level\0"
-/* 1164 */ "DEBUG_LEVEL\0"
-/* 1176 */ "debug-level\0"
-/* 1188 */ "Set the debug verbosity level\0"
-/* 1218 */ "SET_DEBUG_LEVEL\0"
-/* 1234 */ "set-debug-level\0"
-/* 1250 */ "Force ntpq to operate in interactive mode\0"
-/* 1292 */ "INTERACTIVE\0"
-/* 1304 */ "interactive\0"
-/* 1316 */ "numeric host addresses\0"
-/* 1339 */ "NUMERIC\0"
-/* 1347 */ "numeric\0"
-/* 1355 */ "Always output status line with readvar\0"
-/* 1394 */ "OLD_RV\0"
-/* 1401 */ "old-rv\0"
-/* 1408 */ "Print a list of the peers\0"
-/* 1434 */ "PEERS\0"
-/* 1440 */ "peers\0"
-/* 1446 */ "Display the full 'remote' value\0"
-/* 1478 */ "WIDE\0"
-/* 1483 */ "wide\0"
-/* 1488 */ "display extended usage information and exit\0"
-/* 1532 */ "help\0"
-/* 1537 */ "extended usage information passed thru pager\0"
-/* 1582 */ "more-help\0"
-/* 1592 */ "output version information and exit\0"
-/* 1628 */ "version\0"
-/* 1636 */ "save the option state to a config file\0"
-/* 1675 */ "save-opts\0"
-/* 1685 */ "load options from a config file\0"
-/* 1717 */ "LOAD_OPTS\0"
-/* 1727 */ "no-load-opts\0"
-/* 1740 */ "no\0"
-/* 1743 */ "NTPQ\0"
-/* 1748 */ "ntpq - standard NTP query program - Ver. 4.2.8p4-RC1\n"
+/* 1016 */ "Force IPv4 DNS name resolution\0"
+/* 1047 */ "IPV4\0"
+/* 1052 */ "ipv4\0"
+/* 1057 */ "Force IPv6 DNS name resolution\0"
+/* 1088 */ "IPV6\0"
+/* 1093 */ "ipv6\0"
+/* 1098 */ "run a command and exit\0"
+/* 1121 */ "COMMAND\0"
+/* 1129 */ "command\0"
+/* 1137 */ "Increase debug verbosity level\0"
+/* 1168 */ "DEBUG_LEVEL\0"
+/* 1180 */ "debug-level\0"
+/* 1192 */ "Set the debug verbosity level\0"
+/* 1222 */ "SET_DEBUG_LEVEL\0"
+/* 1238 */ "set-debug-level\0"
+/* 1254 */ "Force ntpq to operate in interactive mode\0"
+/* 1296 */ "INTERACTIVE\0"
+/* 1308 */ "interactive\0"
+/* 1320 */ "numeric host addresses\0"
+/* 1343 */ "NUMERIC\0"
+/* 1351 */ "numeric\0"
+/* 1359 */ "Always output status line with readvar\0"
+/* 1398 */ "OLD_RV\0"
+/* 1405 */ "old-rv\0"
+/* 1412 */ "Print a list of the peers\0"
+/* 1438 */ "PEERS\0"
+/* 1444 */ "peers\0"
+/* 1450 */ "Display the full 'remote' value\0"
+/* 1482 */ "WIDE\0"
+/* 1487 */ "wide\0"
+/* 1492 */ "display extended usage information and exit\0"
+/* 1536 */ "help\0"
+/* 1541 */ "extended usage information passed thru pager\0"
+/* 1586 */ "more-help\0"
+/* 1596 */ "output version information and exit\0"
+/* 1632 */ "version\0"
+/* 1640 */ "save the option state to a config file\0"
+/* 1679 */ "save-opts\0"
+/* 1689 */ "load options from a config file\0"
+/* 1721 */ "LOAD_OPTS\0"
+/* 1731 */ "no-load-opts\0"
+/* 1744 */ "no\0"
+/* 1747 */ "NTPQ\0"
+/* 1752 */ "ntpq - standard NTP query program - Ver. 4.2.8p4-sec-RC2\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]\n\0"
-/* 1871 */ "$HOME\0"
-/* 1877 */ ".\0"
-/* 1879 */ ".ntprc\0"
-/* 1886 */ "http://bugs.ntp.org, bugs@ntp.org\0"
-/* 1920 */ "ntpq 4.2.8p4-RC1";
+/* 1879 */ "$HOME\0"
+/* 1885 */ ".\0"
+/* 1887 */ ".ntprc\0"
+/* 1894 */ "http://bugs.ntp.org, bugs@ntp.org\0"
+/* 1928 */ "ntpq 4.2.8p4-sec-RC2";
/**
* ipv4 option description with
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the ipv4 option */
-#define IPV4_DESC (ntpq_opt_strs+1012)
+#define IPV4_DESC (ntpq_opt_strs+1016)
/** Upper-cased name for the ipv4 option */
-#define IPV4_NAME (ntpq_opt_strs+1043)
+#define IPV4_NAME (ntpq_opt_strs+1047)
/** Name string for the ipv4 option */
-#define IPV4_name (ntpq_opt_strs+1048)
+#define IPV4_name (ntpq_opt_strs+1052)
/** Other options that appear in conjunction with the ipv4 option */
static int const aIpv4CantList[] = {
INDEX_OPT_IPV6, NO_EQUIVALENT };
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the ipv6 option */
-#define IPV6_DESC (ntpq_opt_strs+1053)
+#define IPV6_DESC (ntpq_opt_strs+1057)
/** Upper-cased name for the ipv6 option */
-#define IPV6_NAME (ntpq_opt_strs+1084)
+#define IPV6_NAME (ntpq_opt_strs+1088)
/** Name string for the ipv6 option */
-#define IPV6_name (ntpq_opt_strs+1089)
+#define IPV6_name (ntpq_opt_strs+1093)
/** Other options that appear in conjunction with the ipv6 option */
static int const aIpv6CantList[] = {
INDEX_OPT_IPV4, NO_EQUIVALENT };
* command option description:
*/
/** Descriptive text for the command option */
-#define COMMAND_DESC (ntpq_opt_strs+1094)
+#define COMMAND_DESC (ntpq_opt_strs+1098)
/** Upper-cased name for the command option */
-#define COMMAND_NAME (ntpq_opt_strs+1117)
+#define COMMAND_NAME (ntpq_opt_strs+1121)
/** Name string for the command option */
-#define COMMAND_name (ntpq_opt_strs+1125)
+#define COMMAND_name (ntpq_opt_strs+1129)
/** Compiled in flag settings for the command option */
#define COMMAND_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* debug-level option description:
*/
/** Descriptive text for the debug-level option */
-#define DEBUG_LEVEL_DESC (ntpq_opt_strs+1133)
+#define DEBUG_LEVEL_DESC (ntpq_opt_strs+1137)
/** Upper-cased name for the debug-level option */
-#define DEBUG_LEVEL_NAME (ntpq_opt_strs+1164)
+#define DEBUG_LEVEL_NAME (ntpq_opt_strs+1168)
/** Name string for the debug-level option */
-#define DEBUG_LEVEL_name (ntpq_opt_strs+1176)
+#define DEBUG_LEVEL_name (ntpq_opt_strs+1180)
/** Compiled in flag settings for the debug-level option */
#define DEBUG_LEVEL_FLAGS (OPTST_DISABLED)
* set-debug-level option description:
*/
/** Descriptive text for the set-debug-level option */
-#define SET_DEBUG_LEVEL_DESC (ntpq_opt_strs+1188)
+#define SET_DEBUG_LEVEL_DESC (ntpq_opt_strs+1192)
/** Upper-cased name for the set-debug-level option */
-#define SET_DEBUG_LEVEL_NAME (ntpq_opt_strs+1218)
+#define SET_DEBUG_LEVEL_NAME (ntpq_opt_strs+1222)
/** Name string for the set-debug-level option */
-#define SET_DEBUG_LEVEL_name (ntpq_opt_strs+1234)
+#define SET_DEBUG_LEVEL_name (ntpq_opt_strs+1238)
/** Compiled in flag settings for the set-debug-level option */
#define SET_DEBUG_LEVEL_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the interactive option */
-#define INTERACTIVE_DESC (ntpq_opt_strs+1250)
+#define INTERACTIVE_DESC (ntpq_opt_strs+1254)
/** Upper-cased name for the interactive option */
-#define INTERACTIVE_NAME (ntpq_opt_strs+1292)
+#define INTERACTIVE_NAME (ntpq_opt_strs+1296)
/** Name string for the interactive option */
-#define INTERACTIVE_name (ntpq_opt_strs+1304)
+#define INTERACTIVE_name (ntpq_opt_strs+1308)
/** Other options that appear in conjunction with the interactive option */
static int const aInteractiveCantList[] = {
INDEX_OPT_COMMAND,
* numeric option description:
*/
/** Descriptive text for the numeric option */
-#define NUMERIC_DESC (ntpq_opt_strs+1316)
+#define NUMERIC_DESC (ntpq_opt_strs+1320)
/** Upper-cased name for the numeric option */
-#define NUMERIC_NAME (ntpq_opt_strs+1339)
+#define NUMERIC_NAME (ntpq_opt_strs+1343)
/** Name string for the numeric option */
-#define NUMERIC_name (ntpq_opt_strs+1347)
+#define NUMERIC_name (ntpq_opt_strs+1351)
/** Compiled in flag settings for the numeric option */
#define NUMERIC_FLAGS (OPTST_DISABLED)
* old-rv option description:
*/
/** Descriptive text for the old-rv option */
-#define OLD_RV_DESC (ntpq_opt_strs+1355)
+#define OLD_RV_DESC (ntpq_opt_strs+1359)
/** Upper-cased name for the old-rv option */
-#define OLD_RV_NAME (ntpq_opt_strs+1394)
+#define OLD_RV_NAME (ntpq_opt_strs+1398)
/** Name string for the old-rv option */
-#define OLD_RV_name (ntpq_opt_strs+1401)
+#define OLD_RV_name (ntpq_opt_strs+1405)
/** Compiled in flag settings for the old-rv option */
#define OLD_RV_FLAGS (OPTST_DISABLED)
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the peers option */
-#define PEERS_DESC (ntpq_opt_strs+1408)
+#define PEERS_DESC (ntpq_opt_strs+1412)
/** Upper-cased name for the peers option */
-#define PEERS_NAME (ntpq_opt_strs+1434)
+#define PEERS_NAME (ntpq_opt_strs+1438)
/** Name string for the peers option */
-#define PEERS_name (ntpq_opt_strs+1440)
+#define PEERS_name (ntpq_opt_strs+1444)
/** Other options that appear in conjunction with the peers option */
static int const aPeersCantList[] = {
INDEX_OPT_INTERACTIVE, NO_EQUIVALENT };
* wide option description:
*/
/** Descriptive text for the wide option */
-#define WIDE_DESC (ntpq_opt_strs+1446)
+#define WIDE_DESC (ntpq_opt_strs+1450)
/** Upper-cased name for the wide option */
-#define WIDE_NAME (ntpq_opt_strs+1478)
+#define WIDE_NAME (ntpq_opt_strs+1482)
/** Name string for the wide option */
-#define WIDE_name (ntpq_opt_strs+1483)
+#define WIDE_name (ntpq_opt_strs+1487)
/** Compiled in flag settings for the wide option */
#define WIDE_FLAGS (OPTST_DISABLED)
/*
* Help/More_Help/Version option descriptions:
*/
-#define HELP_DESC (ntpq_opt_strs+1488)
-#define HELP_name (ntpq_opt_strs+1532)
+#define HELP_DESC (ntpq_opt_strs+1492)
+#define HELP_name (ntpq_opt_strs+1536)
#ifdef HAVE_WORKING_FORK
-#define MORE_HELP_DESC (ntpq_opt_strs+1537)
-#define MORE_HELP_name (ntpq_opt_strs+1582)
+#define MORE_HELP_DESC (ntpq_opt_strs+1541)
+#define MORE_HELP_name (ntpq_opt_strs+1586)
#define MORE_HELP_FLAGS (OPTST_IMM | OPTST_NO_INIT)
#else
#define MORE_HELP_DESC HELP_DESC
# define VER_FLAGS (OPTST_SET_ARGTYPE(OPARG_TYPE_STRING) | \
OPTST_ARG_OPTIONAL | OPTST_IMM | OPTST_NO_INIT)
#endif
-#define VER_DESC (ntpq_opt_strs+1592)
-#define VER_name (ntpq_opt_strs+1628)
-#define SAVE_OPTS_DESC (ntpq_opt_strs+1636)
-#define SAVE_OPTS_name (ntpq_opt_strs+1675)
-#define LOAD_OPTS_DESC (ntpq_opt_strs+1685)
-#define LOAD_OPTS_NAME (ntpq_opt_strs+1717)
-#define NO_LOAD_OPTS_name (ntpq_opt_strs+1727)
-#define LOAD_OPTS_pfx (ntpq_opt_strs+1740)
+#define VER_DESC (ntpq_opt_strs+1596)
+#define VER_name (ntpq_opt_strs+1632)
+#define SAVE_OPTS_DESC (ntpq_opt_strs+1640)
+#define SAVE_OPTS_name (ntpq_opt_strs+1679)
+#define LOAD_OPTS_DESC (ntpq_opt_strs+1689)
+#define LOAD_OPTS_NAME (ntpq_opt_strs+1721)
+#define NO_LOAD_OPTS_name (ntpq_opt_strs+1731)
+#define LOAD_OPTS_pfx (ntpq_opt_strs+1744)
#define LOAD_OPTS_name (NO_LOAD_OPTS_name + 3)
/**
* Declare option callback procedures
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/** Reference to the upper cased version of ntpq. */
-#define zPROGNAME (ntpq_opt_strs+1743)
+#define zPROGNAME (ntpq_opt_strs+1747)
/** Reference to the title line for ntpq usage. */
-#define zUsageTitle (ntpq_opt_strs+1748)
+#define zUsageTitle (ntpq_opt_strs+1752)
/** ntpq configuration file name. */
-#define zRcName (ntpq_opt_strs+1879)
+#define zRcName (ntpq_opt_strs+1887)
/** Directories to search for ntpq config files. */
static char const * const apzHomeList[3] = {
- ntpq_opt_strs+1871,
- ntpq_opt_strs+1877,
+ ntpq_opt_strs+1879,
+ ntpq_opt_strs+1885,
NULL };
/** The ntpq program bug email address. */
-#define zBugsAddr (ntpq_opt_strs+1886)
+#define zBugsAddr (ntpq_opt_strs+1894)
/** Clarification/explanation of what ntpq does. */
#define zExplain (NULL)
/** Extra detail explaining what ntpq does. */
#define zDetail (NULL)
/** The full version string for ntpq. */
-#define zFullVersion (ntpq_opt_strs+1920)
+#define zFullVersion (ntpq_opt_strs+1928)
/* extracted from optcode.tlib near line 364 */
#if defined(ENABLE_NLS)
translate option names.
*/
/* referenced via ntpqOptions.pzCopyright */
- puts(_("ntpq 4.2.8p4-RC1\n\
+ puts(_("ntpq 4.2.8p4-sec-RC2\n\
Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("load options from a config file"));
/* referenced via ntpqOptions.pzUsageTitle */
- puts(_("ntpq - standard NTP query program - Ver. 4.2.8p4-RC1\n\
+ puts(_("ntpq - standard NTP query program - Ver. 4.2.8p4-sec-RC2\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]\n"));
/* referenced via ntpqOptions.pzFullVersion */
- puts(_("ntpq 4.2.8p4-RC1"));
+ puts(_("ntpq 4.2.8p4-sec-RC2"));
/* referenced via ntpqOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (ntpq-opts.h)
*
- * It has been AutoGen-ed October 6, 2015 at 06:08:03 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:24:57 AM by AutoGen 5.18.5
* From the definitions ntpq-opts.def
* and the template file options
*
/** count of all options for ntpq */
#define OPTION_CT 15
/** ntpq version */
-#define NTPQ_VERSION "4.2.8p4-RC1"
+#define NTPQ_VERSION "4.2.8p4-sec-RC2"
/** Full ntpq version text */
-#define NTPQ_FULL_VERSION "ntpq 4.2.8p4-RC1"
+#define NTPQ_FULL_VERSION "ntpq 4.2.8p4-sec-RC2"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpq 1ntpqman "06 Oct 2015" "4.2.8p4-RC1" "User Commands"
+.TH ntpq 1ntpqman "17 Oct 2015" "4.2.8p4-sec-RC2" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-1da4iE/ag-ceaWhE)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:09:39 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:25:40 AM by AutoGen 5.18.5
.\" From the definitions ntpq-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPQ 1ntpqmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpq-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:10:30 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:25:33 AM by AutoGen 5.18.5
.\" From the definitions ntpq-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>ntpq: Network Time Protocol Query User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="ntpq: Network Time Protocol Query User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#ntpq-Description">ntpq Description</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-Description">ntpq Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">ntpq: Network Time Protocol Query User Manual</h2>
and determine the performance of
<code>ntpd</code>, the NTP daemon.
- <p>This document applies to version 4.2.8p4-RC1 of <code>ntpq</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>ntpq</code>.
<ul class="menu">
<li><a accesskey="1" href="#ntpq-Description">ntpq Description</a>
</ul>
<div class="node">
+<a name="ntpq-Description"></a>
<p><hr>
-
<a name="ntpq-Description"></a>Next: <a rel="next" accesskey="n" href="#Usage">Usage</a>,
+Next: <a rel="next" accesskey="n" href="#Usage">Usage</a>,
Previous: <a rel="previous" accesskey="p" href="#Top">Top</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
<p>For examples and usage, see the <a href="debug.html">NTP Debugging Techniques</a> page.
<div class="node">
-<p><hr>
<a name="ntpq-Invocation"></a>
-<br>
+<p><hr>
+
+
</div>
<h3 class="section">Invoking ntpq</h3>
These are described following.
<dl>
<dt><code>?</code> <code>[</code><kbd>command_keyword</kbd><code>]</code><br><dt><code>help</code> <code>[</code><kbd>command_keyword</kbd><code>]</code><dd>A
-?
+‘?’
by itself will print a list of all the command
keywords known to this incarnation of
<code>ntpq</code>
A
-?
+‘?’
followed by a command keyword will print function and usage
information about the command.
This command is probably a better
page.
<br><dt><code>addvars</code> <kbd>variable_name</kbd><code>[=value]</code> <code>...</code><br><dt><code>rmvars</code> <kbd>variable_name</kbd> <code>...</code><br><dt><code>clearvars</code><br><dt><code>showvars</code><dd>The data carried by NTP mode 6 messages consists of a list of
items of the form
-variable_name=value,
+‘variable_name=value’,
where the
-=value
+‘=value’
is ignored, and can be omitted,
in requests to the server to read variables.
The
does not authenticate requests unless
they are write requests.
The command
-authenticate yes
+‘authenticate yes’
causes
<code>ntpq</code>
to send authentication with all requests it
<code>peer</code>
display.
The command
-authenticate
+‘authenticate’
causes
<code>ntpq</code>
to display whether or not
<code>ntpq</code>
thinks should have a decodable value but didn't are
marked with a trailing
-?.
+‘?’.
<br><dt><code>debug</code> <code>[more | less | off]</code><dd>With no argument, displays the current debug level.
Otherwise, the debug level is changed to the indicated level.
<br><dt><code>delay</code> <kbd>milliseconds</kbd><dd>Specify a time interval to be added to timestamps included in
<dl>
<dt><code>associations</code><dd>Display a list of mobilized associations in the form:
<pre class="example"> ind assid status conf reach auth condition last_event cnt
- </pre>
+</pre>
<dl>
<dt>Sy String Ta Sy Description<br><dt><code>ind</code> <code>Ta</code> <code>index</code> <code>on</code> <code>this</code> <code>list</code><br><dt><code>assid</code> <code>Ta</code> <code>association</code> <code>ID</code><br><dt><code>status</code> <code>Ta</code> <code>peer</code> <code>status</code> <code>word</code><br><dt><code>conf</code> <code>Ta</code> <code>yes</code>: <code>persistent,</code> <code>no</code>: <code>ephemeral</code><br><dt><code>reach</code> <code>Ta</code> <code>yes</code>: <code>reachable,</code> <code>no</code>: <code>unreachable</code><br><dt><code>auth</code> <code>Ta</code> <code>ok</code>, <code>yes</code>, <code>bad</code> <code>and</code> <code>none</code><br><dt><code>condition</code> <code>Ta</code> <code>selection</code> <code>status</code> <code>(see</code> <code>the</code> <code>select</code> <code>field</code> <code>of</code> <code>the</code> <code>peer</code> <code>status</code> <code>word)</code><br><dt><code>last_event</code> <code>Ta</code> <code>event</code> <code>report</code> <code>(see</code> <code>the</code> <code>event</code> <code>field</code> <code>of</code> <code>the</code> <code>peer</code> <code>status</code> <code>word)</code><br><dt><code>cnt</code> <code>Ta</code> <code>event</code> <code>count</code> <code>(see</code> <code>the</code> <code>count</code> <code>field</code> <code>of</code> <code>the</code> <code>peer</code> <code>status</code> <code>word)</code><dd></dl>
<br><dt><code>authinfo</code><dd>Display the authentication statistics.
except that it uses previously stored data rather than making a new query.
<br><dt><code>peers</code><dd>Display a list of peers in the form:
<pre class="example"> [tally]remote refid st t when pool reach delay offset jitter
- </pre>
+</pre>
<dl>
<dt>Variable<dd>Description
<br><dt><code>[tally]</code><dd>single-character code indicating current value of the
</dl>
<br><dt><code>apeers</code><dd>Display a list of peers in the form:
<pre class="example"> [tally]remote refid assid st t when pool reach delay offset jitter
- </pre>
+</pre>
<p>where the output is just like the
<code>peers</code>
command except that the
This software is released under the NTP license, <http://ntp.org/license>.
<ul class="menu">
-<li><a accesskey="1" href="#ntpq-usage">ntpq usage</a>: ntpq help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#ntpq-usage">ntpq usage</a>: ntpq help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#ntpq-ipv4">ntpq ipv4</a>: ipv4 option (-4)
<li><a accesskey="3" href="#ntpq-ipv6">ntpq ipv6</a>: ipv6 option (-6)
<li><a accesskey="4" href="#ntpq-command">ntpq command</a>: command option (-c)
</ul>
<div class="node">
+<a name="ntpq-usage"></a>
<p><hr>
-
<a name="ntpq-usage"></a>Next: <a rel="next" accesskey="n" href="#ntpq-ipv4">ntpq ipv4</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-ipv4">ntpq ipv4</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">ntpq help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">ntpq help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-ntpq-help-3"></a>
This is the automatically generated usage text for ntpq.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
-<pre class="example">ntpq - standard NTP query program - Ver. 4.2.8p3
+<pre class="example">ntpq - standard NTP query program - Ver. 4.2.8p4-RC1
Usage: ntpq [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]
Flg Arg Option-Name Description
-4 no ipv4 Force IPv4 DNS name resolution
Please send bug reports to: <http://bugs.ntp.org, bugs@ntp.org>
</pre>
<div class="node">
+<a name="ntpq-ipv4"></a>
<p><hr>
-
<a name="ntpq-ipv4"></a>Next: <a rel="next" accesskey="n" href="#ntpq-ipv6">ntpq ipv6</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-ipv6">ntpq ipv6</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpq-usage">ntpq usage</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ipv4 option (-4)</h4>
<p>Force DNS resolution of following host names on the command line
to the IPv4 namespace.
<div class="node">
+<a name="ntpq-ipv6"></a>
<p><hr>
-
<a name="ntpq-ipv6"></a>Next: <a rel="next" accesskey="n" href="#ntpq-command">ntpq command</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-command">ntpq command</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpq-ipv4">ntpq ipv4</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ipv6 option (-6)</h4>
<p>Force DNS resolution of following host names on the command line
to the IPv6 namespace.
<div class="node">
+<a name="ntpq-command"></a>
<p><hr>
-
<a name="ntpq-command"></a>Next: <a rel="next" accesskey="n" href="#ntpq-interactive">ntpq interactive</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-interactive">ntpq interactive</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpq-ipv6">ntpq ipv6</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
<h4 class="subsection">command option (-c)</h4>
<p><a name="index-ntpq_002dcommand-6"></a>
This is the “run a command and exit” option.
-This option takes a string argument <span class="file">cmd</span>.
+This option takes a string argument <samp><span class="file">cmd</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
and is added to the list of commands to be executed on the specified
host(s).
<div class="node">
+<a name="ntpq-interactive"></a>
<p><hr>
-
<a name="ntpq-interactive"></a>Next: <a rel="next" accesskey="n" href="#ntpq-numeric">ntpq numeric</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-numeric">ntpq numeric</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpq-command">ntpq command</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
<h4 class="subsection">interactive option (-i)</h4>
Prompts will be written to the standard output and
commands read from the standard input.
<div class="node">
+<a name="ntpq-numeric"></a>
<p><hr>
-
<a name="ntpq-numeric"></a>Next: <a rel="next" accesskey="n" href="#ntpq-old_002drv">ntpq old-rv</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-old_002drv">ntpq old-rv</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpq-interactive">ntpq interactive</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
<h4 class="subsection">numeric option (-n)</h4>
Output all host addresses in dotted-quad numeric format rather than
converting to the canonical host names.
<div class="node">
+<a name="ntpq-old-rv"></a>
+<a name="ntpq-old_002drv"></a>
<p><hr>
-
<a name="ntpq-old_002drv"></a>Next: <a rel="next" accesskey="n" href="#ntpq-peers">ntpq peers</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-peers">ntpq peers</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpq-numeric">ntpq numeric</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
<h4 class="subsection">old-rv option</h4>
preset this option in a script will enable both older and
newer <code>ntpq</code> to behave identically in this regard.
<div class="node">
+<a name="ntpq-peers"></a>
<p><hr>
-
<a name="ntpq-peers"></a>Next: <a rel="next" accesskey="n" href="#ntpq-wide">ntpq wide</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-wide">ntpq wide</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpq-old_002drv">ntpq old-rv</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
<h4 class="subsection">peers option (-p)</h4>
<p>Print a list of the peers known to the server as well as a summary
of their state. This is equivalent to the 'peers' interactive command.
<div class="node">
+<a name="ntpq-wide"></a>
<p><hr>
-
<a name="ntpq-wide"></a>Next: <a rel="next" accesskey="n" href="#ntpq-config">ntpq config</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-config">ntpq config</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpq-peers">ntpq peers</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
<h4 class="subsection">wide option (-w)</h4>
and continue the data display properly indented on the next line.
<div class="node">
+<a name="ntpq-config"></a>
<p><hr>
-
<a name="ntpq-config"></a>Next: <a rel="next" accesskey="n" href="#ntpq-exit-status">ntpq exit status</a>,
+Next: <a rel="next" accesskey="n" href="#ntpq-exit-status">ntpq exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpq-wide">ntpq wide</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
<h4 class="subsection">presetting/configuring ntpq</h4>
<li>$PWD
</ul>
The environment variables <code>HOME</code>, and <code>PWD</code>
-are expanded and replaced when <span class="file">ntpq</span> runs.
+are expanded and replaced when <samp><span class="file">ntpq</span></samp> runs.
For any of these that are plain files, they are simply processed.
-For any that are directories, then a file named <span class="file">.ntprc</span> is searched for
+For any that are directories, then a file named <samp><span class="file">.ntprc</span></samp> is searched for
within that directory and processed.
<p>Configuration files may be in a wide variety of formats.
Only the first letter of the argument is examined:
<dl>
-<dt><span class="samp">version</span><dd>Only print the version. This is the default.
-<br><dt><span class="samp">copyright</span><dd>Name the copyright usage licensing terms.
-<br><dt><span class="samp">verbose</span><dd>Print the full copyright usage licensing terms.
+<dt>‘<samp><span class="samp">version</span></samp>’<dd>Only print the version. This is the default.
+<br><dt>‘<samp><span class="samp">copyright</span></samp>’<dd>Name the copyright usage licensing terms.
+<br><dt>‘<samp><span class="samp">verbose</span></samp>’<dd>Print the full copyright usage licensing terms.
</dl>
<div class="node">
+<a name="ntpq-exit-status"></a>
<p><hr>
-
<a name="ntpq-exit-status"></a>Previous: <a rel="previous" accesskey="p" href="#ntpq-config">ntpq config</a>,
+Previous: <a rel="previous" accesskey="p" href="#ntpq-config">ntpq config</a>,
Up: <a rel="up" accesskey="u" href="#ntpq-Invocation">ntpq Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpq exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
-<br><dt><span class="samp">66 (EX_NOINPUT)</span><dd>A specified configuration file could not be loaded.
-<br><dt><span class="samp">70 (EX_SOFTWARE)</span><dd>libopts had an internal operational error. Please report
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
+<br><dt>‘<samp><span class="samp">66 (EX_NOINPUT)</span></samp>’<dd>A specified configuration file could not be loaded.
+<br><dt>‘<samp><span class="samp">70 (EX_SOFTWARE)</span></samp>’<dd>libopts had an internal operational error. Please report
it to autogen-users@lists.sourceforge.net. Thank you.
</dl>
<div class="node">
+<a name="Usage"></a>
<p><hr>
-
<a name="Usage"></a>Next: <a rel="next" accesskey="n" href="#Internal-Commands">Internal Commands</a>,
+Next: <a rel="next" accesskey="n" href="#Internal-Commands">Internal Commands</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpq-Description">ntpq Description</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
<br></td></tr></table>
<div class="node">
+<a name="Internal-Commands"></a>
<p><hr>
-
<a name="Internal-Commands"></a>Next: <a rel="next" accesskey="n" href="#Control-Message-Commands">Control Message Commands</a>,
+Next: <a rel="next" accesskey="n" href="#Control-Message-Commands">Control Message Commands</a>,
Previous: <a rel="previous" accesskey="p" href="#Usage">Usage</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
<p>Interactive format commands consist of a keyword followed by zero to four arguments. Only enough characters of the full keyword to uniquely identify the command need be typed. The output of a command is normally sent to the standard output, but optionally the output of individual commands may be sent to a file by appending a <code>></code>, followed by a file name, to the command line. A number of interactive format commands are executed entirely within the <code>ntpq</code> program itself and do not result in NTP mode-6 requests being sent to a server. These are described following.
<dl>
-<dt><code><a name="help"></a> ? [</code><kbd>command_keyword</kbd><code>]</code><dt><code>help [</code><kbd>command_keyword</kbd><code>]</code><dd>A <code>?</code> by itself will print a list of all the command keywords known to <code>ntpq</code>. A <code>?</code> followed by a command keyword will print function and usage information about the command.
+<dt><code><a name="help"></a>? [</code><kbd>command_keyword</kbd><code>]</code><dt><code>help [</code><kbd>command_keyword</kbd><code>]</code><dd>A <code>?</code> by itself will print a list of all the command keywords known to <code>ntpq</code>. A <code>?</code> followed by a command keyword will print function and usage information about the command.
- <br><dt><code><a name="addvars"></a> >addvars </code><kbd>name</kbd><code> [ = </code><kbd>value</kbd><code>] [...]</code><dt><code>rmvars </code><kbd>name</kbd><code> [...]</code><dt><code>clearvars</dt></code><dd>The arguments to these commands consist of a list of items of the form
+ <br><dt><code><a name="addvars"></a>>addvars </code><kbd>name</kbd><code> [ = </code><kbd>value</kbd><code>] [...]</code><dt><code>rmvars </code><kbd>name</kbd><code> [...]</code><dt><code>clearvars</dt></code><dd>The arguments to these commands consist of a list of items of the form
<kbd>name</kbd><code> = </code><kbd>value</kbd>, where the <code>= </code><kbd>value</kbd> is ignored,
and can be omitted in read requests.
<code>ntpq</code> maintains an internal list in which data to be included
from the list,
while the <code>clearlist</code> command removes all variables from the list.
- <br><dt><code><a name="cooked"></a> cooked</code><dd>Display server messages in prettyprint format.
+ <br><dt><code><a name="cooked"></a>cooked</code><dd>Display server messages in prettyprint format.
- <br><dt><code><a name="debug"></a> debug more | less | off</code><dd>Turns internal query program debugging on and off.
+ <br><dt><code><a name="debug"></a>debug more | less | off</code><dd>Turns internal query program debugging on and off.
- <br><dt><code><a name="delay"></a> delay </code><kbd>milliseconds</kbd><dd>Specify a time interval to be added to timestamps included in requests which require authentication. This is used to enable (unreliable) server reconfiguration over long delay network paths or between machines whose clocks are unsynchronized. Actually the server does not now require timestamps in authenticated requests, so this command may be obsolete.
+ <br><dt><code><a name="delay"></a>delay </code><kbd>milliseconds</kbd><dd>Specify a time interval to be added to timestamps included in requests which require authentication. This is used to enable (unreliable) server reconfiguration over long delay network paths or between machines whose clocks are unsynchronized. Actually the server does not now require timestamps in authenticated requests, so this command may be obsolete.
- <br><dt><code><a name="host"></a> host </code><kbd>name</kbd><dd>Set the host to which future queries will be sent.
+ <br><dt><code><a name="host"></a>host </code><kbd>name</kbd><dd>Set the host to which future queries will be sent.
The name may be either a DNS name or a numeric address.
- <br><dt><code><a name="hostnames"></a> hostnames [yes | no]</code><dd>If <code>yes</code> is specified, host names are printed in information displays.
+ <br><dt><code><a name="hostnames"></a>hostnames [yes | no]</code><dd>If <code>yes</code> is specified, host names are printed in information displays.
If <code>no</code> is specified, numeric addresses are printed instead.
The default is <code>yes</code>,
unless modified using the command line <code>-n</code> switch.
- <br><dt><code><a name="keyid"></a> keyid </code><kbd>keyid</kbd><dd>This command specifies the key number to be used
+ <br><dt><code><a name="keyid"></a>keyid </code><kbd>keyid</kbd><dd>This command specifies the key number to be used
to authenticate configuration requests.
This must correspond to a key ID configured in <code>ntp.conf</code> for this purpose.
- <br><dt><code><a name="keytype"></a> keytype</code><dd>Specify the digest algorithm to use for authenticated requests,
+ <br><dt><code><a name="keytype"></a>keytype</code><dd>Specify the digest algorithm to use for authenticated requests,
with default <code>MD5</code>.
If the OpenSSL library is installed,
digest can be be any message digest algorithm supported by the library.
The current selections are: <code>MD2</code>, <code>MD4</code>, <code>MD5</code>, <code>MDC2</code>, <code>RIPEMD160</code>, <code>SHA</code> and <code>SHA1</code>.
- <br><dt><code><a name="ntpversion"></a> ntpversion 1 | 2 | 3 | 4</code><dd>Sets the NTP version number which <code>ntpq</code> claims in packets.
+ <br><dt><code><a name="ntpversion"></a>ntpversion 1 | 2 | 3 | 4</code><dd>Sets the NTP version number which <code>ntpq</code> claims in packets.
Defaults to 2.
Note that mode-6 control messages (and modes, for that matter)
didn't exist in NTP version 1.
- <br><dt><code><a name="passwd"></a> passwd</code><dd>This command prompts for a password to authenticate requests.
+ <br><dt><code><a name="passwd"></a>passwd</code><dd>This command prompts for a password to authenticate requests.
The password must correspond to the key ID configured in <code>ntp.conf</code> for this purpose.
- <br><dt><code><a name="quit"></a> quit</code><dd>Exit <code>ntpq</code>.
+ <br><dt><code><a name="quit"></a>quit</code><dd>Exit <code>ntpq</code>.
- <br><dt><code><a name="raw"></a> raw</code><dd>Display server messages as received and without reformatting.
+ <br><dt><code><a name="raw"></a>raw</code><dd>Display server messages as received and without reformatting.
- <br><dt><code><a name="timeout"></a> timeout </code><kbd>millseconds</kbd><dd>Specify a timeout period for responses to server queries.
+ <br><dt><code><a name="timeout"></a>timeout </code><kbd>millseconds</kbd><dd>Specify a timeout period for responses to server queries.
The default is about 5000 milliseconds.
Note that since <code>ntpq</code> retries each query once after a timeout
the total waiting time for a timeout will be twice the timeout value set.
</dl>
<div class="node">
+<a name="Control-Message-Commands"></a>
<p><hr>
-
<a name="Control-Message-Commands"></a>Next: <a rel="next" accesskey="n" href="#Status-Words-and-Kiss-Codes">Status Words and Kiss Codes</a>,
+Next: <a rel="next" accesskey="n" href="#Status-Words-and-Kiss-Codes">Status Words and Kiss Codes</a>,
Previous: <a rel="previous" accesskey="p" href="#Internal-Commands">Internal Commands</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
<br></td></tr></table>
- <br><dt><code><a name="cv"></a>
clockvar </code><kbd>assocID</kbd><code> [</code><kbd>name</kbd><code> [ = </code><kbd>value</kbd><code> [...]] [...]]</code><dt><code>cv </code><kbd>assocID</kbd><code> [</code><kbd>name</kbd><code> [ = </code><kbd>value</kbd><code> [...] ][...]]</code><dd>Display a list of <a href="#clock">clock variables</a> for those associations supporting a reference clock.
+ <br><dt><code><a name="cv"></a>clockvar </code><kbd>assocID</kbd><code> [</code><kbd>name</kbd><code> [ = </code><kbd>value</kbd><code> [...]] [...]]</code><dt><code>cv </code><kbd>assocID</kbd><code> [</code><kbd>name</kbd><code> [ = </code><kbd>value</kbd><code> [...] ][...]]</code><dd>Display a list of <a href="#clock">clock variables</a> for those associations supporting a reference clock.
- <br><dt><code><a name="_003aconfig"></a> :config [...]</code><dd>Send the remainder of the command line, including whitespace, to the server
+ <br><dt><code><a name="g_t_003aconfig"></a>:config [...]</code><dd>Send the remainder of the command line, including whitespace, to the server
as a run-time configuration command in the same format
as the configuration file.
This command is experimental until further notice and clarification.
Authentication is of course required.
- <br><dt><code><a name="config_002dfrom_002dfile"></a> config-from-file </code><kbd>filename</kbd><dd>Send the each line of <kbd>filename</kbd> to the server as
+ <br><dt><code><a name="config_002dfrom_002dfile"></a>config-from-file </code><kbd>filename</kbd><dd>Send the each line of <kbd>filename</kbd> to the server as
run-time configuration commands in the same format as the configuration file.
This command is experimental until further notice and clarification.
Authentication is required.
- <br><dt><code><a name="ifstats"></a> ifstats</code><dd>Display statistics for each local network address.
+ <br><dt><code><a name="ifstats"></a>ifstats</code><dd>Display statistics for each local network address.
Authentication is required.
- <br><dt><code><a name="iostats"></a> iostats</code><dd>Display network and reference clock I/O statistics.
+ <br><dt><code><a name="iostats"></a>iostats</code><dd>Display network and reference clock I/O statistics.
- <br><dt><code><a name="kerninfo"></a> kerninfo</code><dd>Display kernel loop and PPS statistics.
+ <br><dt><code><a name="kerninfo"></a>kerninfo</code><dd>Display kernel loop and PPS statistics.
As with other ntpq output, times are in milliseconds.
The precision value displayed is in milliseconds as well,
unlike the precision system variable.
- <br><dt><code><a name="lassoc"></a> lassociations</code><dd>Perform the same function as the associations command,
+ <br><dt><code><a name="lassoc"></a>lassociations</code><dd>Perform the same function as the associations command,
except display mobilized and unmobilized associations.
- <br><dt><code><a name="monstats"></a> monstats</code><dd>Display monitor facility statistics.
+ <br><dt><code><a name="monstats"></a>monstats</code><dd>Display monitor facility statistics.
- <br><dt><code><a name="mrulist"></a> mrulist [limited | kod | mincount=</code><kbd>count</kbd><code> | laddr=</code><kbd>localaddr</kbd><code> | sort=</code><kbd>sortorder</kbd><code> | resany=</code><kbd>hexmask</kbd><code> | resall=</code><kbd>hexmask</kbd><code>]</code><dd>Obtain and print traffic counts collected and maintained by
+ <br><dt><code><a name="mrulist"></a>mrulist [limited | kod | mincount=</code><kbd>count</kbd><code> | laddr=</code><kbd>localaddr</kbd><code> | sort=</code><kbd>sortorder</kbd><code> | resany=</code><kbd>hexmask</kbd><code> | resall=</code><kbd>hexmask</kbd><code>]</code><dd>Obtain and print traffic counts collected and maintained by
the monitor facility.
With the exception of <code>sort=</code><kbd>sortorder</kbd>,
the options filter the list returned by <code>ntpd</code>.
<br></td></tr></table>
- <br><dt><code><a name="mreadvar"></a> mreadvar </code><kbd>assocID</kbd> <kbd>assocID</kbd><code> [ </code><kbd>variable_name</kbd><code> [ = </code><kbd>value</kbd><code>[ ... ]</code><dt><code><a name="mrv"></a> mrv </code><kbd>assocID</kbd> <kbd>assocID</kbd><code> [ </code><kbd>variable_name</kbd><code> [ = </code><kbd>value</kbd><code>[ ... ]</code><dd>Perform the same function as the <code>readvar</code> command,
+ <br><dt><code><a name="mreadvar"></a>mreadvar </code><kbd>assocID</kbd> <kbd>assocID</kbd><code> [ </code><kbd>variable_name</kbd><code> [ = </code><kbd>value</kbd><code>[ ... ]</code><dt><code><a name="mrv"></a>mrv </code><kbd>assocID</kbd> <kbd>assocID</kbd><code> [ </code><kbd>variable_name</kbd><code> [ = </code><kbd>value</kbd><code>[ ... ]</code><dd>Perform the same function as the <code>readvar</code> command,
except for a range of association IDs.
This range is determined from the association list cached by
the most recent <code>associations</code> command.
- <br><dt><code><a name="passoc"></a> passociations</code><dd>Perform the same function as the <code>associations command</code>, except that
+ <br><dt><code><a name="passoc"></a>passociations</code><dd>Perform the same function as the <code>associations command</code>, except that
it uses previously stored data rather than making a new query.
- <br><dt><code><a name="pe"></a> peers</code><dd>Display a list of peers in the form:
+ <br><dt><code><a name="pe"></a>peers</code><dd>Display a list of peers in the form:
<br>
<code>[tally]remote refid st t when pool reach delay offset jitter</code>
<br></td></tr></table>
- <br><dt><code><a name="rv"></a> readvar </code><kbd>assocID</kbd> <kbd>name</kbd><code> [ = </code><kbd>value</kbd><code> ] [,...]</code><dt><code>rv </code><kbd>assocID</kbd><code> [ </code><kbd>name</kbd><code> ] [,...]</code><dd>Display the specified variables.
+ <br><dt><code><a name="rv"></a>readvar </code><kbd>assocID</kbd> <kbd>name</kbd><code> [ = </code><kbd>value</kbd><code> ] [,...]</code><dt><code>rv </code><kbd>assocID</kbd><code> [ </code><kbd>name</kbd><code> ] [,...]</code><dd>Display the specified variables.
If <kbd>assocID</kbd> is zero,
the variables are from the <a href="#system">system variables</a> name space,
otherwise they are from the <a href="#peer">peer variables</a> name space.
where YYYY is the year, MM the month of year, DD the day of month and
TTTT the time of day.
- <br><dt><code><a name="saveconfig"></a> saveconfig </code><kbd>filename</kbd><dd>Write the current configuration, including any runtime modifications
+ <br><dt><code><a name="saveconfig"></a>saveconfig </code><kbd>filename</kbd><dd>Write the current configuration, including any runtime modifications
given with <code>:config</code> or <code>config-from-file</code>,
to the ntpd host's file <kbd>filename</kbd>.
This command will be rejected by the server unless
The filename used is stored in system variable <code>savedconfig</code>.
Authentication is required.
- <br><dt><code><a name="writevar"></a> writevar </code><kbd>assocID</kbd> <kbd>name</kbd><code> = </code><kbd>value</kbd><code> [,...]</code><dd>Write the specified variables.
+ <br><dt><code><a name="writevar"></a>writevar </code><kbd>assocID</kbd> <kbd>name</kbd><code> = </code><kbd>value</kbd><code> [,...]</code><dd>Write the specified variables.
If the <kbd>assocID</kbd> is zero, the variables are from the
<a href="#system">system variables</a> name space, otherwise they are from the
<a href="#peer">peer variables</a> name space.
The <kbd>assocID</kbd> is required,
as the same name can occur in both spaces.
- <br><dt><code><a name="sysinfo"></a> sysinfo</code><dd>Display operational summary.
+ <br><dt><code><a name="sysinfo"></a>sysinfo</code><dd>Display operational summary.
- <br><dt><code><a name="sysstats"></a> sysstats</code><dd>Print statistics counters maintained in the protocol module.
+ <br><dt><code><a name="sysstats"></a>sysstats</code><dd>Print statistics counters maintained in the protocol module.
</dl>
<div class="node">
+<a name="Status-Words-and-Kiss-Codes"></a>
<p><hr>
-
<a name="Status-Words-and-Kiss-Codes"></a>Next: <a rel="next" accesskey="n" href="#System-Variables">System Variables</a>,
+Next: <a rel="next" accesskey="n" href="#System-Variables">System Variables</a>,
Previous: <a rel="previous" accesskey="p" href="#Control-Message-Commands">Control Message Commands</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
in the reference identifier field in various billboards.
<div class="node">
+<a name="System-Variables"></a>
<p><hr>
-
<a name="System-Variables"></a>Next: <a rel="next" accesskey="n" href="#Peer-Variables">Peer Variables</a>,
+Next: <a rel="next" accesskey="n" href="#Peer-Variables">Peer Variables</a>,
Previous: <a rel="previous" accesskey="p" href="#Status-Words-and-Kiss-Codes">Status Words and Kiss Codes</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
<br></td></tr></table>
<div class="node">
+<a name="Peer-Variables"></a>
<p><hr>
-
<a name="Peer-Variables"></a>Next: <a rel="next" accesskey="n" href="#Clock-Variables">Clock Variables</a>,
+Next: <a rel="next" accesskey="n" href="#Clock-Variables">Clock Variables</a>,
Previous: <a rel="previous" accesskey="p" href="#System-Variables">System Variables</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
<br></td></tr></table>
<div class="node">
+<a name="Clock-Variables"></a>
<p><hr>
-
<a name="Clock-Variables"></a>Previous: <a rel="previous" accesskey="p" href="#Peer-Variables">Peer Variables</a>,
+Previous: <a rel="previous" accesskey="p" href="#Peer-Variables">Peer Variables</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpq @NTPQ_MS@ "06 Oct 2015" "4.2.8p4-RC1" "User Commands"
+.TH ntpq @NTPQ_MS@ "17 Oct 2015" "4.2.8p4-sec-RC2" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-1da4iE/ag-ceaWhE)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:09:39 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:25:40 AM by AutoGen 5.18.5
.\" From the definitions ntpq-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPQ @NTPQ_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpq-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:10:30 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:25:33 AM by AutoGen 5.18.5
.\" From the definitions ntpq-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntpsnmpd.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 06:15:50 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:25:53 AM by AutoGen 5.18.5
# From the definitions ntpsnmpd-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p4-RC1
+ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p4-sec-RC2
Usage: ntpsnmpd [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
Flg Arg Option-Name Description
-n no nofork Do not fork
/*
* EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.c)
*
- * It has been AutoGen-ed October 6, 2015 at 06:11:02 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:25:42 AM by AutoGen 5.18.5
* From the definitions ntpsnmpd-opts.def
* and the template file options
*
#endif
extern FILE * option_usage_fp;
#define zCopyright (ntpsnmpd_opt_strs+0)
-#define zLicenseDescrip (ntpsnmpd_opt_strs+348)
+#define zLicenseDescrip (ntpsnmpd_opt_strs+352)
#ifndef NULL
/**
* static const strings for ntpsnmpd options
*/
-static char const ntpsnmpd_opt_strs[1622] =
-/* 0 */ "ntpsnmpd 4.2.8p4-RC1\n"
+static char const ntpsnmpd_opt_strs[1634] =
+/* 0 */ "ntpsnmpd 4.2.8p4-sec-RC2\n"
"Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
"can be seen at:\n"
" <http://ntp.org/license>\n"
" <http://opensource.org/licenses/ntp-license.php>\n\0"
-/* 348 */ "Permission to use, copy, modify, and distribute this software and its\n"
+/* 352 */ "Permission to use, copy, modify, and distribute this software and its\n"
"documentation for any purpose with or without fee is hereby granted,\n"
"provided that the above copyright notice appears in all copies and that\n"
"both the copyright notice and this permission notice appear in supporting\n"
"Time Foundation makes no representations about the suitability this\n"
"software for any purpose. It is provided \"as is\" without express or\n"
"implied warranty.\n\0"
-/* 1016 */ "Do not fork\0"
-/* 1028 */ "NOFORK\0"
-/* 1035 */ "nofork\0"
-/* 1042 */ "Log to syslog()\0"
-/* 1058 */ "SYSLOG\0"
-/* 1065 */ "syslog\0"
-/* 1072 */ "The socket address ntpsnmpd uses to connect to net-snmpd\0"
-/* 1129 */ "AGENTXSOCKET\0"
-/* 1142 */ "agentxsocket\0"
-/* 1155 */ "unix:/var/agentx/master\0"
-/* 1179 */ "display extended usage information and exit\0"
-/* 1223 */ "help\0"
-/* 1228 */ "extended usage information passed thru pager\0"
-/* 1273 */ "more-help\0"
-/* 1283 */ "output version information and exit\0"
-/* 1319 */ "version\0"
-/* 1327 */ "save the option state to a config file\0"
-/* 1366 */ "save-opts\0"
-/* 1376 */ "load options from a config file\0"
-/* 1408 */ "LOAD_OPTS\0"
-/* 1418 */ "no-load-opts\0"
-/* 1431 */ "no\0"
-/* 1434 */ "NTPSNMPD\0"
-/* 1443 */ "ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p4-RC1\n"
+/* 1020 */ "Do not fork\0"
+/* 1032 */ "NOFORK\0"
+/* 1039 */ "nofork\0"
+/* 1046 */ "Log to syslog()\0"
+/* 1062 */ "SYSLOG\0"
+/* 1069 */ "syslog\0"
+/* 1076 */ "The socket address ntpsnmpd uses to connect to net-snmpd\0"
+/* 1133 */ "AGENTXSOCKET\0"
+/* 1146 */ "agentxsocket\0"
+/* 1159 */ "unix:/var/agentx/master\0"
+/* 1183 */ "display extended usage information and exit\0"
+/* 1227 */ "help\0"
+/* 1232 */ "extended usage information passed thru pager\0"
+/* 1277 */ "more-help\0"
+/* 1287 */ "output version information and exit\0"
+/* 1323 */ "version\0"
+/* 1331 */ "save the option state to a config file\0"
+/* 1370 */ "save-opts\0"
+/* 1380 */ "load options from a config file\0"
+/* 1412 */ "LOAD_OPTS\0"
+/* 1422 */ "no-load-opts\0"
+/* 1435 */ "no\0"
+/* 1438 */ "NTPSNMPD\0"
+/* 1447 */ "ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p4-sec-RC2\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]...\n\0"
-/* 1550 */ "$HOME\0"
-/* 1556 */ ".\0"
-/* 1558 */ ".ntprc\0"
-/* 1565 */ "http://bugs.ntp.org, bugs@ntp.org\0"
-/* 1599 */ "\n\0"
-/* 1601 */ "ntpsnmpd 4.2.8p4-RC1";
+/* 1558 */ "$HOME\0"
+/* 1564 */ ".\0"
+/* 1566 */ ".ntprc\0"
+/* 1573 */ "http://bugs.ntp.org, bugs@ntp.org\0"
+/* 1607 */ "\n\0"
+/* 1609 */ "ntpsnmpd 4.2.8p4-sec-RC2";
/**
* nofork option description:
*/
/** Descriptive text for the nofork option */
-#define NOFORK_DESC (ntpsnmpd_opt_strs+1016)
+#define NOFORK_DESC (ntpsnmpd_opt_strs+1020)
/** Upper-cased name for the nofork option */
-#define NOFORK_NAME (ntpsnmpd_opt_strs+1028)
+#define NOFORK_NAME (ntpsnmpd_opt_strs+1032)
/** Name string for the nofork option */
-#define NOFORK_name (ntpsnmpd_opt_strs+1035)
+#define NOFORK_name (ntpsnmpd_opt_strs+1039)
/** Compiled in flag settings for the nofork option */
#define NOFORK_FLAGS (OPTST_DISABLED)
* syslog option description:
*/
/** Descriptive text for the syslog option */
-#define SYSLOG_DESC (ntpsnmpd_opt_strs+1042)
+#define SYSLOG_DESC (ntpsnmpd_opt_strs+1046)
/** Upper-cased name for the syslog option */
-#define SYSLOG_NAME (ntpsnmpd_opt_strs+1058)
+#define SYSLOG_NAME (ntpsnmpd_opt_strs+1062)
/** Name string for the syslog option */
-#define SYSLOG_name (ntpsnmpd_opt_strs+1065)
+#define SYSLOG_name (ntpsnmpd_opt_strs+1069)
/** Compiled in flag settings for the syslog option */
#define SYSLOG_FLAGS (OPTST_DISABLED)
* agentXSocket option description:
*/
/** Descriptive text for the agentXSocket option */
-#define AGENTXSOCKET_DESC (ntpsnmpd_opt_strs+1072)
+#define AGENTXSOCKET_DESC (ntpsnmpd_opt_strs+1076)
/** Upper-cased name for the agentXSocket option */
-#define AGENTXSOCKET_NAME (ntpsnmpd_opt_strs+1129)
+#define AGENTXSOCKET_NAME (ntpsnmpd_opt_strs+1133)
/** Name string for the agentXSocket option */
-#define AGENTXSOCKET_name (ntpsnmpd_opt_strs+1142)
+#define AGENTXSOCKET_name (ntpsnmpd_opt_strs+1146)
/** The compiled in default value for the agentXSocket option argument */
-#define AGENTXSOCKET_DFT_ARG (ntpsnmpd_opt_strs+1155)
+#define AGENTXSOCKET_DFT_ARG (ntpsnmpd_opt_strs+1159)
/** Compiled in flag settings for the agentXSocket option */
#define AGENTXSOCKET_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
/*
* Help/More_Help/Version option descriptions:
*/
-#define HELP_DESC (ntpsnmpd_opt_strs+1179)
-#define HELP_name (ntpsnmpd_opt_strs+1223)
+#define HELP_DESC (ntpsnmpd_opt_strs+1183)
+#define HELP_name (ntpsnmpd_opt_strs+1227)
#ifdef HAVE_WORKING_FORK
-#define MORE_HELP_DESC (ntpsnmpd_opt_strs+1228)
-#define MORE_HELP_name (ntpsnmpd_opt_strs+1273)
+#define MORE_HELP_DESC (ntpsnmpd_opt_strs+1232)
+#define MORE_HELP_name (ntpsnmpd_opt_strs+1277)
#define MORE_HELP_FLAGS (OPTST_IMM | OPTST_NO_INIT)
#else
#define MORE_HELP_DESC HELP_DESC
# define VER_FLAGS (OPTST_SET_ARGTYPE(OPARG_TYPE_STRING) | \
OPTST_ARG_OPTIONAL | OPTST_IMM | OPTST_NO_INIT)
#endif
-#define VER_DESC (ntpsnmpd_opt_strs+1283)
-#define VER_name (ntpsnmpd_opt_strs+1319)
-#define SAVE_OPTS_DESC (ntpsnmpd_opt_strs+1327)
-#define SAVE_OPTS_name (ntpsnmpd_opt_strs+1366)
-#define LOAD_OPTS_DESC (ntpsnmpd_opt_strs+1376)
-#define LOAD_OPTS_NAME (ntpsnmpd_opt_strs+1408)
-#define NO_LOAD_OPTS_name (ntpsnmpd_opt_strs+1418)
-#define LOAD_OPTS_pfx (ntpsnmpd_opt_strs+1431)
+#define VER_DESC (ntpsnmpd_opt_strs+1287)
+#define VER_name (ntpsnmpd_opt_strs+1323)
+#define SAVE_OPTS_DESC (ntpsnmpd_opt_strs+1331)
+#define SAVE_OPTS_name (ntpsnmpd_opt_strs+1370)
+#define LOAD_OPTS_DESC (ntpsnmpd_opt_strs+1380)
+#define LOAD_OPTS_NAME (ntpsnmpd_opt_strs+1412)
+#define NO_LOAD_OPTS_name (ntpsnmpd_opt_strs+1422)
+#define LOAD_OPTS_pfx (ntpsnmpd_opt_strs+1435)
#define LOAD_OPTS_name (NO_LOAD_OPTS_name + 3)
/**
* Declare option callback procedures
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/** Reference to the upper cased version of ntpsnmpd. */
-#define zPROGNAME (ntpsnmpd_opt_strs+1434)
+#define zPROGNAME (ntpsnmpd_opt_strs+1438)
/** Reference to the title line for ntpsnmpd usage. */
-#define zUsageTitle (ntpsnmpd_opt_strs+1443)
+#define zUsageTitle (ntpsnmpd_opt_strs+1447)
/** ntpsnmpd configuration file name. */
-#define zRcName (ntpsnmpd_opt_strs+1558)
+#define zRcName (ntpsnmpd_opt_strs+1566)
/** Directories to search for ntpsnmpd config files. */
static char const * const apzHomeList[3] = {
- ntpsnmpd_opt_strs+1550,
- ntpsnmpd_opt_strs+1556,
+ ntpsnmpd_opt_strs+1558,
+ ntpsnmpd_opt_strs+1564,
NULL };
/** The ntpsnmpd program bug email address. */
-#define zBugsAddr (ntpsnmpd_opt_strs+1565)
+#define zBugsAddr (ntpsnmpd_opt_strs+1573)
/** Clarification/explanation of what ntpsnmpd does. */
-#define zExplain (ntpsnmpd_opt_strs+1599)
+#define zExplain (ntpsnmpd_opt_strs+1607)
/** Extra detail explaining what ntpsnmpd does. */
#define zDetail (NULL)
/** The full version string for ntpsnmpd. */
-#define zFullVersion (ntpsnmpd_opt_strs+1601)
+#define zFullVersion (ntpsnmpd_opt_strs+1609)
/* extracted from optcode.tlib near line 364 */
#if defined(ENABLE_NLS)
translate option names.
*/
/* referenced via ntpsnmpdOptions.pzCopyright */
- puts(_("ntpsnmpd 4.2.8p4-RC1\n\
+ puts(_("ntpsnmpd 4.2.8p4-sec-RC2\n\
Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("load options from a config file"));
/* referenced via ntpsnmpdOptions.pzUsageTitle */
- puts(_("ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p4-RC1\n\
+ puts(_("ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p4-sec-RC2\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]...\n"));
/* referenced via ntpsnmpdOptions.pzExplain */
puts(_("\n"));
/* referenced via ntpsnmpdOptions.pzFullVersion */
- puts(_("ntpsnmpd 4.2.8p4-RC1"));
+ puts(_("ntpsnmpd 4.2.8p4-sec-RC2"));
/* referenced via ntpsnmpdOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.h)
*
- * It has been AutoGen-ed October 6, 2015 at 06:11:02 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:25:42 AM by AutoGen 5.18.5
* From the definitions ntpsnmpd-opts.def
* and the template file options
*
/** count of all options for ntpsnmpd */
#define OPTION_CT 8
/** ntpsnmpd version */
-#define NTPSNMPD_VERSION "4.2.8p4-RC1"
+#define NTPSNMPD_VERSION "4.2.8p4-sec-RC2"
/** Full ntpsnmpd version text */
-#define NTPSNMPD_FULL_VERSION "ntpsnmpd 4.2.8p4-RC1"
+#define NTPSNMPD_FULL_VERSION "ntpsnmpd 4.2.8p4-sec-RC2"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpsnmpd 1ntpsnmpdman "06 Oct 2015" "4.2.8p4-RC1" "User Commands"
+.TH ntpsnmpd 1ntpsnmpdman "17 Oct 2015" "4.2.8p4-sec-RC2" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-tYaOrF/ag-FYaGqF)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:15:38 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:25:54 AM by AutoGen 5.18.5
.\" From the definitions ntpsnmpd-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPSNMPD 1ntpsnmpdmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:16:06 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:25:50 AM by AutoGen 5.18.5
.\" From the definitions ntpsnmpd-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>ntpsnmpd: Network Time Protocol SNMP Daemon User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="ntpsnmpd: Network Time Protocol SNMP Daemon User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#ntpsnmpd-Description">ntpsnmpd Description</a>,
+Next: <a rel="next" accesskey="n" href="#ntpsnmpd-Description">ntpsnmpd Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">ntpsnmpd: Network Time Protocol Query User Manual</h2>
<p>The <code>ntpsnmpd</code> utility program is used to monitor NTP daemon <code>ntpd</code>
operations and determine performance. It uses the standard NTP mode 6 control
- <p>This document applies to version 4.2.8p4-RC1 of <code>ntpsnmpd</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>ntpsnmpd</code>.
<ul class="menu">
<li><a accesskey="1" href="#ntpsnmpd-Description">ntpsnmpd Description</a>: Description
</ul>
<div class="node">
+<a name="ntpsnmpd-Description"></a>
<p><hr>
-
<a name="ntpsnmpd-Description"></a>Next: <a rel="next" accesskey="n" href="#Usage">Usage</a>,
+Next: <a rel="next" accesskey="n" href="#Usage">Usage</a>,
Previous: <a rel="previous" accesskey="p" href="#Top">Top</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
<p>The <code>ntpsnmpd</code> utility program provides an SNMP MIB agent for <code>ntpd</code>.
<div class="node">
+<a name="Usage"></a>
<p><hr>
-
<a name="Usage"></a>Previous: <a rel="previous" accesskey="p" href="#ntpsnmpd-Description">ntpsnmpd Description</a>,
+Previous: <a rel="previous" accesskey="p" href="#ntpsnmpd-Description">ntpsnmpd Description</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpsnmpd @NTPSNMPD_MS@ "06 Oct 2015" "4.2.8p4-RC1" "User Commands"
+.TH ntpsnmpd @NTPSNMPD_MS@ "17 Oct 2015" "4.2.8p4-sec-RC2" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-tYaOrF/ag-FYaGqF)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:15:38 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:25:54 AM by AutoGen 5.18.5
.\" From the definitions ntpsnmpd-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPSNMPD @NTPSNMPD_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:16:06 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:25:50 AM by AutoGen 5.18.5
.\" From the definitions ntpsnmpd-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
# Special. Normally unused. A suffix.
#special=ag
-special=
+special=sec
# prerelease can be empty, 'beta', or 'rc'.
prerelease=rc
# - - prerelease is emptied
# else (not in RC)
# - rcpoint is empty and unused (for now).
-rcpoint=1
+rcpoint=2
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH calc_tickadj 1calc_tickadjman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH calc_tickadj 1calc_tickadjman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-Z6aGoq/ag-a7aOnq)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:19 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:35 AM by AutoGen 5.18.5
.\" From the definitions calc_tickadj-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt CALC_TICKADJ 1calc_tickadjmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (calc_tickadj-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:22 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:33 AM by AutoGen 5.18.5
.\" From the definitions calc_tickadj-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>calc_tickadj User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="calc_tickadj User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">calc_tickadj User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#calc_005ftickadj-Description">calc_tickadj Description</a>,
+Next: <a rel="next" accesskey="n" href="#calc_005ftickadj-Description">calc_tickadj Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">calc_tickadj User's Manual</h2>
<p>This document describes the use of the NTP Project's <code>calc_tickadj</code> program.
-This document applies to version 4.2.8p4-RC1 of <code>calc_tickadj</code>.
+This document applies to version 4.2.8p4-sec-RC2 of <code>calc_tickadj</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
</ul>
<div class="node">
+<a name="calc_tickadj-Invocation"></a>
+<a name="calc_005ftickadj-Invocation"></a>
<p><hr>
-
<a name="calc_005ftickadj-Invocation"></a>Previous: <a rel="previous" accesskey="p" href="#calc_005ftickadj-Description">calc_tickadj Description</a>,
+Previous: <a rel="previous" accesskey="p" href="#calc_005ftickadj-Description">calc_tickadj Description</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<h3 class="section">Invoking calc_tickadj</h3>
using the <code>agtexi-cmd</code> template and the option descriptions for the <code>calc_tickadj</code> program.
<ul class="menu">
-<li><a accesskey="1" href="#calc_005ftickadj-usage">calc_tickadj usage</a>: calc_tickadj help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#calc_005ftickadj-usage">calc_tickadj usage</a>: calc_tickadj help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#calc_005ftickadj-drift_002dfile">calc_tickadj drift-file</a>: drift-file option (-d)
<li><a accesskey="3" href="#calc_005ftickadj-tick">calc_tickadj tick</a>: tick option (-t)
<li><a accesskey="4" href="#calc_005ftickadj-exit-status">calc_tickadj exit status</a>: exit status
</ul>
<div class="node">
+<a name="calc_tickadj-usage"></a>
+<a name="calc_005ftickadj-usage"></a>
<p><hr>
-
<a name="calc_005ftickadj-usage"></a>Next: <a rel="next" accesskey="n" href="#calc_005ftickadj-drift_002dfile">calc_tickadj drift-file</a>,
+Next: <a rel="next" accesskey="n" href="#calc_005ftickadj-drift_002dfile">calc_tickadj drift-file</a>,
Up: <a rel="up" accesskey="u" href="#calc_005ftickadj-Invocation">calc_tickadj Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">calc_tickadj help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">calc_tickadj help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-calc_005ftickadj-help-3"></a>
This is the automatically generated usage text for calc_tickadj.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
<pre class="example">calc_tickadj - Calculates "optimal" value for tick given ntp drift file. - Ver. 4.2.7p467
hyphen and the flag character.
</pre>
<div class="node">
+<a name="calc_tickadj-drift-file"></a>
+<a name="calc_005ftickadj-drift_002dfile"></a>
<p><hr>
-
<a name="calc_005ftickadj-drift_002dfile"></a>Next: <a rel="next" accesskey="n" href="#calc_005ftickadj-tick">calc_tickadj tick</a>,
+Next: <a rel="next" accesskey="n" href="#calc_005ftickadj-tick">calc_tickadj tick</a>,
Previous: <a rel="previous" accesskey="p" href="#calc_005ftickadj-usage">calc_tickadj usage</a>,
Up: <a rel="up" accesskey="u" href="#calc_005ftickadj-Invocation">calc_tickadj Invocation</a>
-<br>
+
</div>
<h4 class="subsection">drift-file option (-d)</h4>
This option takes a string argument.
Use the specified drift file for calculations
<div class="node">
+<a name="calc_tickadj-tick"></a>
+<a name="calc_005ftickadj-tick"></a>
<p><hr>
-
<a name="calc_005ftickadj-tick"></a>Next: <a rel="next" accesskey="n" href="#calc_005ftickadj-exit-status">calc_tickadj exit status</a>,
+Next: <a rel="next" accesskey="n" href="#calc_005ftickadj-exit-status">calc_tickadj exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#calc_005ftickadj-drift_002dfile">calc_tickadj drift-file</a>,
Up: <a rel="up" accesskey="u" href="#calc_005ftickadj-Invocation">calc_tickadj Invocation</a>
-<br>
+
</div>
<h4 class="subsection">tick option (-t)</h4>
This option takes a number argument.
The current tick which to adjustment will be calculated
<div class="node">
+<a name="calc_tickadj-exit-status"></a>
+<a name="calc_005ftickadj-exit-status"></a>
<p><hr>
-
<a name="calc_005ftickadj-exit-status"></a>Previous: <a rel="previous" accesskey="p" href="#calc_005ftickadj-tick">calc_tickadj tick</a>,
+Previous: <a rel="previous" accesskey="p" href="#calc_005ftickadj-tick">calc_tickadj tick</a>,
Up: <a rel="up" accesskey="u" href="#calc_005ftickadj-Invocation">calc_tickadj Invocation</a>
-<br>
+
</div>
<h4 class="subsection">calc_tickadj exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
</dl>
</body></html>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH calc_tickadj 1calc_tickadjman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH calc_tickadj 1calc_tickadjman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-Z6aGoq/ag-a7aOnq)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:19 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:35 AM by AutoGen 5.18.5
.\" From the definitions calc_tickadj-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt CALC_TICKADJ 1calc_tickadjmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (calc_tickadj-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:22 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:33 AM by AutoGen 5.18.5
.\" From the definitions calc_tickadj-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-calc_tickadj.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 05:58:24 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:21:37 AM by AutoGen 5.18.5
# From the definitions calc_tickadj-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
#
# EDIT THIS FILE WITH CAUTION (invoke-plot_summary.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 05:59:09 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:22:03 AM by AutoGen 5.18.5
# From the definitions plot_summary-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-plot_summary - plot statistics generated by summary script - Ver. 4.2.8p4-RC1
+plot_summary - plot statistics generated by summary script - Ver. 4.2.8p4-sec-RC2
USAGE: plot_summary [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
--directory=str Where the summary files are
#
# EDIT THIS FILE WITH CAUTION (invoke-summary.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 05:59:14 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:22:07 AM by AutoGen 5.18.5
# From the definitions summary-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-summary - compute various stastics from NTP stat files - Ver. 4.2.8p4-RC1
+summary - compute various stastics from NTP stat files - Ver. 4.2.8p4-sec-RC2
USAGE: summary [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
--directory=str Directory containing stat files
#
# EDIT THIS FILE WITH CAUTION (invoke-ntp-wait.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 05:58:32 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:21:41 AM by AutoGen 5.18.5
# From the definitions ntp-wait-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p4-RC1
+ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p4-sec-RC2
USAGE: ntp-wait [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
-n, --tries=num Number of times to check ntpd
# EDIT THIS FILE WITH CAUTION (ntp-wait-opts)
#
-# It has been AutoGen-ed October 6, 2015 at 05:58:26 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:21:38 AM by AutoGen 5.18.5
# From the definitions ntp-wait-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p4-RC1
+ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p4-sec-RC2
USAGE: ntp-wait [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
-n, --tries=num Number of times to check ntpd
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp-wait 1ntp-waitman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH ntp-wait 1ntp-waitman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-xqayOr/ag-KqaGNr)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:28 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:43 AM by AutoGen 5.18.5
.\" From the definitions ntp-wait-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTP_WAIT 1ntp-waitmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp-wait-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:34 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:39 AM by AutoGen 5.18.5
.\" From the definitions ntp-wait-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>Ntp-wait User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="Ntp-wait User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">Ntp-wait User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dwait-Description">ntp-wait Description</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dwait-Description">ntp-wait Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<p>This document describes the use of the NTP Project's <code>ntp-wait</code> program.
and only then start any applicaitons (like database servers) that require
accurate and stable time.
- <p>This document applies to version 4.2.8p4-RC1 of <code>ntp-wait</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>ntp-wait</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
</ul>
<div class="node">
-<p><hr>
+<a name="ntp-wait-Invocation"></a>
<a name="ntp_002dwait-Invocation"></a>
-<br>
+<p><hr>
+
+
</div>
<h3 class="section">0.1 Invoking ntp-wait</h3>
using the <code>agtexi-cmd</code> template and the option descriptions for the <code>ntp-wait</code> program.
<ul class="menu">
-<li><a accesskey="1" href="#ntp_002dwait-usage">ntp-wait usage</a>: ntp-wait help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#ntp_002dwait-usage">ntp-wait usage</a>: ntp-wait help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#ntp_002dwait-tries">ntp-wait tries</a>: tries option (-n)
<li><a accesskey="3" href="#ntp_002dwait-sleep">ntp-wait sleep</a>: sleep option (-s)
<li><a accesskey="4" href="#ntp_002dwait-verbose">ntp-wait verbose</a>: verbose option (-v)
</ul>
<div class="node">
+<a name="ntp-wait-usage"></a>
+<a name="ntp_002dwait-usage"></a>
<p><hr>
-
<a name="ntp_002dwait-usage"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dwait-tries">ntp-wait tries</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dwait-tries">ntp-wait tries</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dwait-Invocation">ntp-wait Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">0.1.1 ntp-wait help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">0.1.1 ntp-wait help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-ntp_002dwait-help-3"></a>
This is the automatically generated usage text for ntp-wait.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
-<pre class="example">ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p4-RC1
+<pre class="example">ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p4-sec-RC2
USAGE: ntp-wait [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
-n, --tries=num Number of times to check ntpd
hyphen and the flag character.
</pre>
<div class="node">
+<a name="ntp-wait-tries"></a>
+<a name="ntp_002dwait-tries"></a>
<p><hr>
-
<a name="ntp_002dwait-tries"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dwait-sleep">ntp-wait sleep</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dwait-sleep">ntp-wait sleep</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dwait-usage">ntp-wait usage</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dwait-Invocation">ntp-wait Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.2 tries option (-n)</h4>
The maximum number of times we will check <code>ntpd</code> to see if
it has been able to synchronize and stabilize the system clock.
<div class="node">
+<a name="ntp-wait-sleep"></a>
+<a name="ntp_002dwait-sleep"></a>
<p><hr>
-
<a name="ntp_002dwait-sleep"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dwait-verbose">ntp-wait verbose</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dwait-verbose">ntp-wait verbose</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dwait-tries">ntp-wait tries</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dwait-Invocation">ntp-wait Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.3 sleep option (-s)</h4>
<p><a name="index-ntp_002dwait_002dsleep-5"></a>
This is the “how long to sleep between tries” option.
-This option takes a number argument <span class="file">secs-between-tries</span>.
- We will sleep for <span class="file">secs-between-tries</span> after each query
+This option takes a number argument <samp><span class="file">secs-between-tries</span></samp>.
+ We will sleep for <samp><span class="file">secs-between-tries</span></samp> after each query
of <code>ntpd</code> that returns "the time is not yet stable".
<div class="node">
+<a name="ntp-wait-verbose"></a>
+<a name="ntp_002dwait-verbose"></a>
<p><hr>
-
<a name="ntp_002dwait-verbose"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dwait-exit-status">ntp-wait exit status</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dwait-exit-status">ntp-wait exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dwait-sleep">ntp-wait sleep</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dwait-Invocation">ntp-wait Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.4 verbose option (-v)</h4>
By default, <code>ntp-wait</code> is silent.
With this option, <code>ntp-wait</code> will provide status information.
<div class="node">
+<a name="ntp-wait-exit-status"></a>
+<a name="ntp_002dwait-exit-status"></a>
<p><hr>
-
<a name="ntp_002dwait-exit-status"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dwait-Authors">ntp-wait Authors</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dwait-Authors">ntp-wait Authors</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dwait-verbose">ntp-wait verbose</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dwait-Invocation">ntp-wait Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.5 ntp-wait exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
</dl>
<div class="node">
+<a name="ntp-wait-Authors"></a>
+<a name="ntp_002dwait-Authors"></a>
<p><hr>
-
<a name="ntp_002dwait-Authors"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dwait-Notes">ntp-wait Notes</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dwait-Notes">ntp-wait Notes</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dwait-exit-status">ntp-wait exit status</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dwait-Invocation">ntp-wait Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.6 ntp-wait Authors</h4>
<div class="node">
+<a name="ntp-wait-Notes"></a>
+<a name="ntp_002dwait-Notes"></a>
<p><hr>
-
<a name="ntp_002dwait-Notes"></a>Previous: <a rel="previous" accesskey="p" href="#ntp_002dwait-Authors">ntp-wait Authors</a>,
+Previous: <a rel="previous" accesskey="p" href="#ntp_002dwait-Authors">ntp-wait Authors</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dwait-Invocation">ntp-wait Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.7 ntp-wait Notes</h4>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp-wait @NTP_WAIT_MS@ "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH ntp-wait @NTP_WAIT_MS@ "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-xqayOr/ag-KqaGNr)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:28 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:43 AM by AutoGen 5.18.5
.\" From the definitions ntp-wait-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTP_WAIT @NTP_WAIT_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp-wait-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:34 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:39 AM by AutoGen 5.18.5
.\" From the definitions ntp-wait-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntpsweep.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 05:58:38 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:21:47 AM by AutoGen 5.18.5
# From the definitions ntpsweep-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p4-RC1
+ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p4-sec-RC2
USAGE: ntpsweep [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [hostfile]
-l, --host-list=str Host to execute actions on
# EDIT THIS FILE WITH CAUTION (ntpsweep-opts)
#
-# It has been AutoGen-ed October 6, 2015 at 05:58:36 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:21:44 AM by AutoGen 5.18.5
# From the definitions ntpsweep-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p4-RC1
+ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p4-sec-RC2
USAGE: ntpsweep [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [hostfile]
-l, --host-list=str Host to execute actions on
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpsweep 1ntpsweepman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH ntpsweep 1ntpsweepman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-Lmaqet/ag-Xmaydt)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:40 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:48 AM by AutoGen 5.18.5
.\" From the definitions ntpsweep-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPSWEEP 1ntpsweepmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpsweep-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:44 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:45 AM by AutoGen 5.18.5
.\" From the definitions ntpsweep-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>ntpsweep User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="ntpsweep User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">ntpsweep User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#ntpsweep-Description">ntpsweep Description</a>,
+Next: <a rel="next" accesskey="n" href="#ntpsweep-Description">ntpsweep Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<p>This document describes the use of the NTP Project's <code>ntpsweep</code> program.
- <p>This document applies to version 4.2.8p4-RC1 of <code>ntpsweep</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>ntpsweep</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
</ul>
<div class="node">
-<p><hr>
<a name="ntpsweep-Invocation"></a>
-<br>
+<p><hr>
+
+
</div>
<h3 class="section">0.1 Invoking ntpsweep</h3>
using the <code>agtexi-cmd</code> template and the option descriptions for the <code>ntpsweep</code> program.
<ul class="menu">
-<li><a accesskey="1" href="#ntpsweep-usage">ntpsweep usage</a>: ntpsweep help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#ntpsweep-usage">ntpsweep usage</a>: ntpsweep help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#ntpsweep-host_002dlist">ntpsweep host-list</a>: host-list option (-l)
<li><a accesskey="3" href="#ntpsweep-peers">ntpsweep peers</a>: peers option (-p)
<li><a accesskey="4" href="#ntpsweep-maxlevel">ntpsweep maxlevel</a>: maxlevel option (-m)
</ul>
<div class="node">
+<a name="ntpsweep-usage"></a>
<p><hr>
-
<a name="ntpsweep-usage"></a>Next: <a rel="next" accesskey="n" href="#ntpsweep-host_002dlist">ntpsweep host-list</a>,
+Next: <a rel="next" accesskey="n" href="#ntpsweep-host_002dlist">ntpsweep host-list</a>,
Up: <a rel="up" accesskey="u" href="#ntpsweep-Invocation">ntpsweep Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">0.1.1 ntpsweep help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">0.1.1 ntpsweep help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-ntpsweep-help-3"></a>
This is the automatically generated usage text for ntpsweep.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
-<pre class="example">ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p4-RC1
+<pre class="example">ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p4-sec-RC2
USAGE: ntpsweep [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [hostfile]
-l, --host-list=str Host to execute actions on
hyphen and the flag character.
</pre>
<div class="node">
+<a name="ntpsweep-host-list"></a>
+<a name="ntpsweep-host_002dlist"></a>
<p><hr>
-
<a name="ntpsweep-host_002dlist"></a>Next: <a rel="next" accesskey="n" href="#ntpsweep-peers">ntpsweep peers</a>,
+Next: <a rel="next" accesskey="n" href="#ntpsweep-peers">ntpsweep peers</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpsweep-usage">ntpsweep usage</a>,
Up: <a rel="up" accesskey="u" href="#ntpsweep-Invocation">ntpsweep Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.2 host-list option (-l)</h4>
<p>Use this option to specify the host on which this script operates.
May appear multiple times.
<div class="node">
+<a name="ntpsweep-peers"></a>
<p><hr>
-
<a name="ntpsweep-peers"></a>Next: <a rel="next" accesskey="n" href="#ntpsweep-maxlevel">ntpsweep maxlevel</a>,
+Next: <a rel="next" accesskey="n" href="#ntpsweep-maxlevel">ntpsweep maxlevel</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpsweep-host_002dlist">ntpsweep host-list</a>,
Up: <a rel="up" accesskey="u" href="#ntpsweep-Invocation">ntpsweep Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.3 peers option (-p)</h4>
<p><a name="index-ntpsweep_002dpeers-5"></a>
This is the “recursively list all peers a host synchronizes to” option.
-This option has no <span class="samp">doc</span> documentation.
+This option has no ‘<samp><span class="samp">doc</span></samp>’ documentation.
<div class="node">
+<a name="ntpsweep-maxlevel"></a>
<p><hr>
-
<a name="ntpsweep-maxlevel"></a>Next: <a rel="next" accesskey="n" href="#ntpsweep-strip">ntpsweep strip</a>,
+Next: <a rel="next" accesskey="n" href="#ntpsweep-strip">ntpsweep strip</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpsweep-peers">ntpsweep peers</a>,
Up: <a rel="up" accesskey="u" href="#ntpsweep-Invocation">ntpsweep Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.4 maxlevel option (-m)</h4>
<p><a name="index-ntpsweep_002dmaxlevel-6"></a>
This is the “traverse peers up to this level (4 is a reasonable number)” option.
This option takes a number argument.
-This option has no <span class="samp">doc</span> documentation.
+This option has no ‘<samp><span class="samp">doc</span></samp>’ documentation.
<div class="node">
+<a name="ntpsweep-strip"></a>
<p><hr>
-
<a name="ntpsweep-strip"></a>Next: <a rel="next" accesskey="n" href="#ntpsweep-host">ntpsweep host</a>,
+Next: <a rel="next" accesskey="n" href="#ntpsweep-host">ntpsweep host</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpsweep-maxlevel">ntpsweep maxlevel</a>,
Up: <a rel="up" accesskey="u" href="#ntpsweep-Invocation">ntpsweep Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.5 strip option (-s)</h4>
<p><a name="index-ntpsweep_002dstrip-7"></a>
This is the “strip this string from hostnames” option.
This option takes a string argument.
-This option has no <span class="samp">doc</span> documentation.
+This option has no ‘<samp><span class="samp">doc</span></samp>’ documentation.
<div class="node">
+<a name="ntpsweep-host"></a>
<p><hr>
-
<a name="ntpsweep-host"></a>Next: <a rel="next" accesskey="n" href="#ntpsweep-exit-status">ntpsweep exit status</a>,
+Next: <a rel="next" accesskey="n" href="#ntpsweep-exit-status">ntpsweep exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#ntpsweep-strip">ntpsweep strip</a>,
Up: <a rel="up" accesskey="u" href="#ntpsweep-Invocation">ntpsweep Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.6 host option (-h)</h4>
<p><a name="index-ntpsweep_002dhost-8"></a>
This is the “specify a single host” option.
This option takes a string argument.
-This option has no <span class="samp">doc</span> documentation.
+This option has no ‘<samp><span class="samp">doc</span></samp>’ documentation.
<p><strong>NOTE</strong><strong>: THIS OPTION IS DEPRECATED</strong>
<div class="node">
+<a name="ntpsweep-exit-status"></a>
<p><hr>
-
<a name="ntpsweep-exit-status"></a>Previous: <a rel="previous" accesskey="p" href="#ntpsweep-host">ntpsweep host</a>,
+Previous: <a rel="previous" accesskey="p" href="#ntpsweep-host">ntpsweep host</a>,
Up: <a rel="up" accesskey="u" href="#ntpsweep-Invocation">ntpsweep Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.7 ntpsweep exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
</dl>
</body></html>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpsweep 1ntpsweepman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH ntpsweep 1ntpsweepman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-Lmaqet/ag-Xmaydt)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:40 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:48 AM by AutoGen 5.18.5
.\" From the definitions ntpsweep-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPSWEEP 1ntpsweepmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpsweep-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:44 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:45 AM by AutoGen 5.18.5
.\" From the definitions ntpsweep-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntptrace.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 05:58:51 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:21:52 AM by AutoGen 5.18.5
# From the definitions ntptrace-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntptrace - Trace peers of an NTP server - Ver. 4.2.8p4-RC1
+ntptrace - Trace peers of an NTP server - Ver. 4.2.8p4-sec-RC2
USAGE: ntptrace [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [host]
-n, --numeric Print IP addresses instead of hostnames
# EDIT THIS FILE WITH CAUTION (ntptrace-opts)
#
-# It has been AutoGen-ed October 6, 2015 at 05:58:45 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:21:49 AM by AutoGen 5.18.5
# From the definitions ntptrace-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-ntptrace - Trace peers of an NTP server - Ver. 4.2.8p4-RC1
+ntptrace - Trace peers of an NTP server - Ver. 4.2.8p4-sec-RC2
USAGE: ntptrace [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [host]
-n, --numeric Print IP addresses instead of hostnames
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntptrace 1ntptraceman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH ntptrace 1ntptraceman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-F6aywu/ag-S6aGvu)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:47 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:54 AM by AutoGen 5.18.5
.\" From the definitions ntptrace-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPTRACE 1ntptracemdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntptrace-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:53 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:50 AM by AutoGen 5.18.5
.\" From the definitions ntptrace-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>Ntptrace User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="Ntptrace User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">Ntptrace User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#ntptrace-Description">ntptrace Description</a>,
+Next: <a rel="next" accesskey="n" href="#ntptrace-Description">ntptrace Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">Simple Network Time Protocol User Manual</h2>
<p>This document describes the use of the NTP Project's <code>ntptrace</code> program.
-This document applies to version 4.2.8p4-RC1 of <code>ntptrace</code>.
+This document applies to version 4.2.8p4-sec-RC2 of <code>ntptrace</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
</ul>
<div class="node">
+<a name="ntptrace-Invocation"></a>
<p><hr>
-
<a name="ntptrace-Invocation"></a>Previous: <a rel="previous" accesskey="p" href="#ntptrace-Description">ntptrace Description</a>,
+Previous: <a rel="previous" accesskey="p" href="#ntptrace-Description">ntptrace Description</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<h3 class="section">Invoking ntptrace</h3>
using the <code>agtexi-cmd</code> template and the option descriptions for the <code>ntptrace</code> program.
<ul class="menu">
-<li><a accesskey="1" href="#ntptrace-usage">ntptrace usage</a>: ntptrace help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#ntptrace-usage">ntptrace usage</a>: ntptrace help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#ntptrace-numeric">ntptrace numeric</a>: numeric option (-n)
<li><a accesskey="3" href="#ntptrace-max_002dhosts">ntptrace max-hosts</a>: max-hosts option (-m)
<li><a accesskey="4" href="#ntptrace-host">ntptrace host</a>: host option (-r)
</ul>
<div class="node">
+<a name="ntptrace-usage"></a>
<p><hr>
-
<a name="ntptrace-usage"></a>Next: <a rel="next" accesskey="n" href="#ntptrace-numeric">ntptrace numeric</a>,
+Next: <a rel="next" accesskey="n" href="#ntptrace-numeric">ntptrace numeric</a>,
Up: <a rel="up" accesskey="u" href="#ntptrace-Invocation">ntptrace Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">ntptrace help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">ntptrace help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-ntptrace-help-3"></a>
This is the automatically generated usage text for ntptrace.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
-<pre class="example">ntptrace - Trace peers of an NTP server - Ver. 4.2.8p4-RC1
+<pre class="example">ntptrace - Trace peers of an NTP server - Ver. 4.2.8p4-sec-RC2
USAGE: ntptrace [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [host]
-n, --numeric Print IP addresses instead of hostnames
hyphen and the flag character.
</pre>
<div class="node">
+<a name="ntptrace-numeric"></a>
<p><hr>
-
<a name="ntptrace-numeric"></a>Next: <a rel="next" accesskey="n" href="#ntptrace-max_002dhosts">ntptrace max-hosts</a>,
+Next: <a rel="next" accesskey="n" href="#ntptrace-max_002dhosts">ntptrace max-hosts</a>,
Previous: <a rel="previous" accesskey="p" href="#ntptrace-usage">ntptrace usage</a>,
Up: <a rel="up" accesskey="u" href="#ntptrace-Invocation">ntptrace Invocation</a>
-<br>
+
</div>
<h4 class="subsection">numeric option (-n)</h4>
Output hosts as dotted-quad numeric format rather than converting to
the canonical host names.
<div class="node">
+<a name="ntptrace-max-hosts"></a>
+<a name="ntptrace-max_002dhosts"></a>
<p><hr>
-
<a name="ntptrace-max_002dhosts"></a>Next: <a rel="next" accesskey="n" href="#ntptrace-host">ntptrace host</a>,
+Next: <a rel="next" accesskey="n" href="#ntptrace-host">ntptrace host</a>,
Previous: <a rel="previous" accesskey="p" href="#ntptrace-numeric">ntptrace numeric</a>,
Up: <a rel="up" accesskey="u" href="#ntptrace-Invocation">ntptrace Invocation</a>
-<br>
+
</div>
<h4 class="subsection">max-hosts option (-m)</h4>
<p><a name="index-ntptrace_002dmax_002dhosts-5"></a>
This is the “maximum number of peers to trace” option.
This option takes a number argument.
-This option has no <span class="samp">doc</span> documentation.
+This option has no ‘<samp><span class="samp">doc</span></samp>’ documentation.
<div class="node">
+<a name="ntptrace-host"></a>
<p><hr>
-
<a name="ntptrace-host"></a>Next: <a rel="next" accesskey="n" href="#ntptrace-exit-status">ntptrace exit status</a>,
+Next: <a rel="next" accesskey="n" href="#ntptrace-exit-status">ntptrace exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#ntptrace-max_002dhosts">ntptrace max-hosts</a>,
Up: <a rel="up" accesskey="u" href="#ntptrace-Invocation">ntptrace Invocation</a>
-<br>
+
</div>
<h4 class="subsection">host option (-r)</h4>
<p><a name="index-ntptrace_002dhost-6"></a>
This is the “single remote host” option.
This option takes a string argument.
-This option has no <span class="samp">doc</span> documentation.
+This option has no ‘<samp><span class="samp">doc</span></samp>’ documentation.
<div class="node">
+<a name="ntptrace-exit-status"></a>
<p><hr>
-
<a name="ntptrace-exit-status"></a>Previous: <a rel="previous" accesskey="p" href="#ntptrace-host">ntptrace host</a>,
+Previous: <a rel="previous" accesskey="p" href="#ntptrace-host">ntptrace host</a>,
Up: <a rel="up" accesskey="u" href="#ntptrace-Invocation">ntptrace Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntptrace exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
</dl>
</body></html>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntptrace @NTPTRACE_MS@ "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH ntptrace @NTPTRACE_MS@ "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-F6aywu/ag-S6aGvu)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:47 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:54 AM by AutoGen 5.18.5
.\" From the definitions ntptrace-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTPTRACE @NTPTRACE_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntptrace-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:53 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:50 AM by AutoGen 5.18.5
.\" From the definitions ntptrace-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
# EDIT THIS FILE WITH CAUTION (plot_summary-opts)
#
-# It has been AutoGen-ed October 6, 2015 at 05:59:05 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:22:01 AM by AutoGen 5.18.5
# From the definitions plot_summary-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-plot_summary - plot statistics generated by summary script - Ver. 4.2.8p4-RC1
+plot_summary - plot statistics generated by summary script - Ver. 4.2.8p4-sec-RC2
USAGE: plot_summary [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
--directory=str Where the summary files are
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH plot_summary 1plot_summaryman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH plot_summary 1plot_summaryman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-1Maamx/ag-cNailx)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:59:11 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:22:04 AM by AutoGen 5.18.5
.\" From the definitions plot_summary-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt PLOT_SUMMARY 1plot_summarymdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (plot_summary-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:59:12 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:22:05 AM by AutoGen 5.18.5
.\" From the definitions plot_summary-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>Plot_summary User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="Plot_summary User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">Plot_summary User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#plot_005fsummary-Description">plot_summary Description</a>,
+Next: <a rel="next" accesskey="n" href="#plot_005fsummary-Description">plot_summary Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">Plot_summary User Manual</h2>
<p>This document describes the use of the NTP Project's <code>plot_summary</code> program.
-This document applies to version 4.2.8p4-RC1 of <code>plot_summary</code>.
+This document applies to version 4.2.8p4-sec-RC2 of <code>plot_summary</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
</ul>
<div class="node">
+<a name="plot_summary-Invocation"></a>
+<a name="plot_005fsummary-Invocation"></a>
<p><hr>
-
<a name="plot_005fsummary-Invocation"></a>Previous: <a rel="previous" accesskey="p" href="#plot_005fsummary-Description">plot_summary Description</a>,
+Previous: <a rel="previous" accesskey="p" href="#plot_005fsummary-Description">plot_summary Description</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<h3 class="section">Invoking plot_summary</h3>
using the <code>agtexi-cmd</code> template and the option descriptions for the <code>plot_summary</code> program.
<ul class="menu">
-<li><a accesskey="1" href="#plot_005fsummary-usage">plot_summary usage</a>: plot_summary help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#plot_005fsummary-usage">plot_summary usage</a>: plot_summary help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#plot_005fsummary-directory">plot_summary directory</a>: directory option
<li><a accesskey="3" href="#plot_005fsummary-identifier">plot_summary identifier</a>: identifier option
<li><a accesskey="4" href="#plot_005fsummary-peer">plot_summary peer</a>: peer option
</ul>
<div class="node">
+<a name="plot_summary-usage"></a>
+<a name="plot_005fsummary-usage"></a>
<p><hr>
-
<a name="plot_005fsummary-usage"></a>Next: <a rel="next" accesskey="n" href="#plot_005fsummary-directory">plot_summary directory</a>,
+Next: <a rel="next" accesskey="n" href="#plot_005fsummary-directory">plot_summary directory</a>,
Up: <a rel="up" accesskey="u" href="#plot_005fsummary-Invocation">plot_summary Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">plot_summary help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">plot_summary help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-plot_005fsummary-help-3"></a>
This is the automatically generated usage text for plot_summary.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
-<pre class="example">plot_summary - plot statistics generated by summary script - Ver. 4.2.8p4-RC1
+<pre class="example">plot_summary - plot statistics generated by summary script - Ver. 4.2.8p4-sec-RC2
USAGE: plot_summary [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
--directory=str Where the summary files are
hyphen and the flag character.
</pre>
<div class="node">
+<a name="plot_summary-directory"></a>
+<a name="plot_005fsummary-directory"></a>
<p><hr>
-
<a name="plot_005fsummary-directory"></a>Next: <a rel="next" accesskey="n" href="#plot_005fsummary-identifier">plot_summary identifier</a>,
+Next: <a rel="next" accesskey="n" href="#plot_005fsummary-identifier">plot_summary identifier</a>,
Previous: <a rel="previous" accesskey="p" href="#plot_005fsummary-usage">plot_summary usage</a>,
Up: <a rel="up" accesskey="u" href="#plot_005fsummary-Invocation">plot_summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">directory option</h4>
The directory where the <code>plot_summary</code> will search for the
*_summary files generated by <code>summary</code> script.
<div class="node">
+<a name="plot_summary-identifier"></a>
+<a name="plot_005fsummary-identifier"></a>
<p><hr>
-
<a name="plot_005fsummary-identifier"></a>Next: <a rel="next" accesskey="n" href="#plot_005fsummary-peer">plot_summary peer</a>,
+Next: <a rel="next" accesskey="n" href="#plot_005fsummary-peer">plot_summary peer</a>,
Previous: <a rel="previous" accesskey="p" href="#plot_005fsummary-directory">plot_summary directory</a>,
Up: <a rel="up" accesskey="u" href="#plot_005fsummary-Invocation">plot_summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">identifier option</h4>
Where does the plotted data come from, default to string "host" plus
current hostname
<div class="node">
+<a name="plot_summary-peer"></a>
+<a name="plot_005fsummary-peer"></a>
<p><hr>
-
<a name="plot_005fsummary-peer"></a>Next: <a rel="next" accesskey="n" href="#plot_005fsummary-plot_002dterm">plot_summary plot-term</a>,
+Next: <a rel="next" accesskey="n" href="#plot_005fsummary-plot_002dterm">plot_summary plot-term</a>,
Previous: <a rel="previous" accesskey="p" href="#plot_005fsummary-identifier">plot_summary identifier</a>,
Up: <a rel="up" accesskey="u" href="#plot_005fsummary-Invocation">plot_summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">peer option</h4>
<p>By default the peer_summary plots are not generated. Use this option to
specify list of peers if you want to generate plots for them.
<div class="node">
+<a name="plot_summary-plot-term"></a>
+<a name="plot_005fsummary-plot_002dterm"></a>
<p><hr>
-
<a name="plot_005fsummary-plot_002dterm"></a>Next: <a rel="next" accesskey="n" href="#plot_005fsummary-output_002dfile">plot_summary output-file</a>,
+Next: <a rel="next" accesskey="n" href="#plot_005fsummary-output_002dfile">plot_summary output-file</a>,
Previous: <a rel="previous" accesskey="p" href="#plot_005fsummary-peer">plot_summary peer</a>,
Up: <a rel="up" accesskey="u" href="#plot_005fsummary-Invocation">plot_summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">plot-term option</h4>
<code>dumb</code> is it's not'. See output from -e "set
terminal") for the list of avalaible options.
<div class="node">
+<a name="plot_summary-output-file"></a>
+<a name="plot_005fsummary-output_002dfile"></a>
<p><hr>
-
<a name="plot_005fsummary-output_002dfile"></a>Next: <a rel="next" accesskey="n" href="#plot_005fsummary-exit-status">plot_summary exit status</a>,
+Next: <a rel="next" accesskey="n" href="#plot_005fsummary-exit-status">plot_summary exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#plot_005fsummary-plot_002dterm">plot_summary plot-term</a>,
Up: <a rel="up" accesskey="u" href="#plot_005fsummary-Invocation">plot_summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">output-file option</h4>
This option takes a str argument.
Output file for <code>gnuplot</code>, default to stdout.
<div class="node">
+<a name="plot_summary-exit-status"></a>
+<a name="plot_005fsummary-exit-status"></a>
<p><hr>
-
<a name="plot_005fsummary-exit-status"></a>Previous: <a rel="previous" accesskey="p" href="#plot_005fsummary-output_002dfile">plot_summary output-file</a>,
+Previous: <a rel="previous" accesskey="p" href="#plot_005fsummary-output_002dfile">plot_summary output-file</a>,
Up: <a rel="up" accesskey="u" href="#plot_005fsummary-Invocation">plot_summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">plot_summary exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
</dl>
</body></html>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH plot_summary 1plot_summaryman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH plot_summary 1plot_summaryman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-1Maamx/ag-cNailx)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:59:11 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:22:04 AM by AutoGen 5.18.5
.\" From the definitions plot_summary-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt PLOT_SUMMARY 1plot_summarymdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (plot_summary-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:59:12 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:22:05 AM by AutoGen 5.18.5
.\" From the definitions plot_summary-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
# EDIT THIS FILE WITH CAUTION (summary-opts)
#
-# It has been AutoGen-ed October 6, 2015 at 05:59:07 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:22:02 AM by AutoGen 5.18.5
# From the definitions summary-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-summary - compute various stastics from NTP stat files - Ver. 4.2.8p4-RC1
+summary - compute various stastics from NTP stat files - Ver. 4.2.8p4-sec-RC2
USAGE: summary [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
--directory=str Directory containing stat files
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH summary 1summaryman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH summary 1summaryman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-B7aOzx/ag-O7aWyx)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:59:16 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:22:08 AM by AutoGen 5.18.5
.\" From the definitions summary-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt SUMMARY 1summarymdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (summary-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:59:18 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:22:09 AM by AutoGen 5.18.5
.\" From the definitions summary-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>Summary User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="Summary User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">Summary User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#summary-Description">summary Description</a>,
+Next: <a rel="next" accesskey="n" href="#summary-Description">summary Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">Summary User Manual</h2>
<p>This document describes the use of the NTP Project's <code>summary</code> program.
-This document applies to version 4.2.8p4-RC1 of <code>summary</code>.
+This document applies to version 4.2.8p4-sec-RC2 of <code>summary</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
</ul>
<div class="node">
+<a name="summary-Invocation"></a>
<p><hr>
-
<a name="summary-Invocation"></a>Previous: <a rel="previous" accesskey="p" href="#summary-Description">summary Description</a>,
+Previous: <a rel="previous" accesskey="p" href="#summary-Description">summary Description</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<h3 class="section">Invoking summary</h3>
using the <code>agtexi-cmd</code> template and the option descriptions for the <code>summary</code> program.
<ul class="menu">
-<li><a accesskey="1" href="#summary-usage">summary usage</a>: summary help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#summary-usage">summary usage</a>: summary help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#summary-directory">summary directory</a>: directory option
<li><a accesskey="3" href="#summary-end_002ddate">summary end-date</a>: end-date option
<li><a accesskey="4" href="#summary-output_002ddirectory">summary output-directory</a>: output-directory option
</ul>
<div class="node">
+<a name="summary-usage"></a>
<p><hr>
-
<a name="summary-usage"></a>Next: <a rel="next" accesskey="n" href="#summary-directory">summary directory</a>,
+Next: <a rel="next" accesskey="n" href="#summary-directory">summary directory</a>,
Up: <a rel="up" accesskey="u" href="#summary-Invocation">summary Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">summary help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">summary help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-summary-help-3"></a>
This is the automatically generated usage text for summary.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
-<pre class="example">summary - compute various stastics from NTP stat files - Ver. 4.2.8p4-RC1
+<pre class="example">summary - compute various stastics from NTP stat files - Ver. 4.2.8p4-sec-RC2
USAGE: summary [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
--directory=str Directory containing stat files
hyphen and the flag character.
</pre>
<div class="node">
+<a name="summary-directory"></a>
<p><hr>
-
<a name="summary-directory"></a>Next: <a rel="next" accesskey="n" href="#summary-end_002ddate">summary end-date</a>,
+Next: <a rel="next" accesskey="n" href="#summary-end_002ddate">summary end-date</a>,
Previous: <a rel="previous" accesskey="p" href="#summary-usage">summary usage</a>,
Up: <a rel="up" accesskey="u" href="#summary-Invocation">summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">directory option</h4>
The directory where <code>ntpd</code> will search for .stat files generated
by <code>ntpd</code>.
<div class="node">
+<a name="summary-end-date"></a>
+<a name="summary-end_002ddate"></a>
<p><hr>
-
<a name="summary-end_002ddate"></a>Next: <a rel="next" accesskey="n" href="#summary-output_002ddirectory">summary output-directory</a>,
+Next: <a rel="next" accesskey="n" href="#summary-output_002ddirectory">summary output-directory</a>,
Previous: <a rel="previous" accesskey="p" href="#summary-directory">summary directory</a>,
Up: <a rel="up" accesskey="u" href="#summary-Invocation">summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">end-date option</h4>
option. Defaults to today minus one day (Use <code>date -u +%Y%m%d</code>)
to get the timestamp.
<div class="node">
+<a name="summary-output-directory"></a>
+<a name="summary-output_002ddirectory"></a>
<p><hr>
-
<a name="summary-output_002ddirectory"></a>Next: <a rel="next" accesskey="n" href="#summary-start_002ddate">summary start-date</a>,
+Next: <a rel="next" accesskey="n" href="#summary-start_002ddate">summary start-date</a>,
Previous: <a rel="previous" accesskey="p" href="#summary-end_002ddate">summary end-date</a>,
Up: <a rel="up" accesskey="u" href="#summary-Invocation">summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">output-directory option</h4>
This option takes a str argument.
The output directory <code>summary</code> will write all output files to.
<div class="node">
+<a name="summary-start-date"></a>
+<a name="summary-start_002ddate"></a>
<p><hr>
-
<a name="summary-start_002ddate"></a>Next: <a rel="next" accesskey="n" href="#summary-exit-status">summary exit status</a>,
+Next: <a rel="next" accesskey="n" href="#summary-exit-status">summary exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#summary-output_002ddirectory">summary output-directory</a>,
Up: <a rel="up" accesskey="u" href="#summary-Invocation">summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">start-date option</h4>
Process all files with the date suffix more or equal to value of
this option. Defaults to 197000101.
<div class="node">
+<a name="summary-exit-status"></a>
<p><hr>
-
<a name="summary-exit-status"></a>Previous: <a rel="previous" accesskey="p" href="#summary-start_002ddate">summary start-date</a>,
+Previous: <a rel="previous" accesskey="p" href="#summary-start_002ddate">summary start-date</a>,
Up: <a rel="up" accesskey="u" href="#summary-Invocation">summary Invocation</a>
-<br>
+
</div>
<h4 class="subsection">summary exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
</dl>
</body></html>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH summary 1summaryman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH summary 1summaryman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-B7aOzx/ag-O7aWyx)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:59:16 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:22:08 AM by AutoGen 5.18.5
.\" From the definitions summary-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt SUMMARY 1summarymdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (summary-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:59:18 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:22:09 AM by AutoGen 5.18.5
.\" From the definitions summary-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-update-leap.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 05:58:58 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:21:57 AM by AutoGen 5.18.5
# From the definitions update-leap-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
# EDIT THIS FILE WITH CAUTION (update-leap-opts)
#
-# It has been AutoGen-ed October 6, 2015 at 05:59:04 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:22:01 AM by AutoGen 5.18.5
# From the definitions update-leap-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-update-leap - leap-seconds file manager/updater - Ver. 4.2.8p4-RC1
+update-leap - leap-seconds file manager/updater - Ver. 4.2.8p4-sec-RC2
USAGE: update-leap [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
-s, --source-url=str The URL of the master copy of the leapseconds file
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH update-leap 1update-leapman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH update-leap 1update-leapman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-KSaamv/ag-XSailv)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:55 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:22:00 AM by AutoGen 5.18.5
.\" From the definitions update-leap-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt UPDATE_LEAP 1update-leapmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (update-leap-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:59:03 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:55 AM by AutoGen 5.18.5
.\" From the definitions update-leap-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>update-leap User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="update-leap User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">update-leap User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#update_002dleap-Description">update-leap Description</a>,
+Next: <a rel="next" accesskey="n" href="#update_002dleap-Description">update-leap Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<p>This document describes the use of the NTP Project's <code>update-leap</code> program.
- <p>This document applies to version 4.2.8p4-RC1 of <code>update-leap</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>update-leap</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
</ul>
<div class="node">
-<p><hr>
+<a name="update-leap-Invocation"></a>
<a name="update_002dleap-Invocation"></a>
-<br>
+<p><hr>
+
+
</div>
<h3 class="section">0.1 Invoking update-leap</h3>
using the <code>agtexi-cmd</code> template and the option descriptions for the <code>update-leap</code> program.
<ul class="menu">
-<li><a accesskey="1" href="#update_002dleap-usage">update-leap usage</a>: update-leap help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#update_002dleap-usage">update-leap usage</a>: update-leap help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#update_002dleap-source_002durl">update-leap source-url</a>: source-url option (-s)
<li><a accesskey="3" href="#update_002dleap-ipv4">update-leap ipv4</a>: ipv4 option (-4)
<li><a accesskey="4" href="#update_002dleap-destination">update-leap destination</a>: destination option (-d)
</ul>
<div class="node">
+<a name="update-leap-usage"></a>
+<a name="update_002dleap-usage"></a>
<p><hr>
-
<a name="update_002dleap-usage"></a>Next: <a rel="next" accesskey="n" href="#update_002dleap-source_002durl">update-leap source-url</a>,
+Next: <a rel="next" accesskey="n" href="#update_002dleap-source_002durl">update-leap source-url</a>,
Up: <a rel="up" accesskey="u" href="#update_002dleap-Invocation">update-leap Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">0.1.1 update-leap help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">0.1.1 update-leap help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-update_002dleap-help-3"></a>
This is the automatically generated usage text for update-leap.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
<pre class="example"> update-leap
Version $VERSION
</pre>
<div class="node">
+<a name="update-leap-source-url"></a>
+<a name="update_002dleap-source_002durl"></a>
<p><hr>
-
<a name="update_002dleap-source_002durl"></a>Next: <a rel="next" accesskey="n" href="#update_002dleap-ipv4">update-leap ipv4</a>,
+Next: <a rel="next" accesskey="n" href="#update_002dleap-ipv4">update-leap ipv4</a>,
Previous: <a rel="previous" accesskey="p" href="#update_002dleap-usage">update-leap usage</a>,
Up: <a rel="up" accesskey="u" href="#update_002dleap-Invocation">update-leap Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.2 source-url option (-s)</h4>
Specify the URL of the master copy to download
$LEAPSRC
<div class="node">
+<a name="update-leap-ipv4"></a>
+<a name="update_002dleap-ipv4"></a>
<p><hr>
-
<a name="update_002dleap-ipv4"></a>Next: <a rel="next" accesskey="n" href="#update_002dleap-destination">update-leap destination</a>,
+Next: <a rel="next" accesskey="n" href="#update_002dleap-destination">update-leap destination</a>,
Previous: <a rel="previous" accesskey="p" href="#update_002dleap-source_002durl">update-leap source-url</a>,
Up: <a rel="up" accesskey="u" href="#update_002dleap-Invocation">update-leap Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.3 ipv4 option (-4)</h4>
doc = <<- _EndOfDoc_
Prefer IPv4 or IPv6 (as specified) addresses, but use either.
<div class="node">
+<a name="update-leap-destination"></a>
+<a name="update_002dleap-destination"></a>
<p><hr>
-
<a name="update_002dleap-destination"></a>Next: <a rel="next" accesskey="n" href="#update_002dleap-expiration">update-leap expiration</a>,
+Next: <a rel="next" accesskey="n" href="#update_002dleap-expiration">update-leap expiration</a>,
Previous: <a rel="previous" accesskey="p" href="#update_002dleap-ipv4">update-leap ipv4</a>,
Up: <a rel="up" accesskey="u" href="#update_002dleap-Invocation">update-leap Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.4 destination option (-d)</h4>
<p><a name="index-update_002dleap_002ddestination-6"></a>
This is the “filename on the local system” option.
-This option takes a string argument <span class="file">float</span>.
+This option takes a string argument <samp><span class="file">float</span></samp>.
The name to use to store the leapfile on the local system.
$LEAPFILE
<div class="node">
+<a name="update-leap-expiration"></a>
+<a name="update_002dleap-expiration"></a>
<p><hr>
-
<a name="update_002dleap-expiration"></a>Next: <a rel="next" accesskey="n" href="#update_002dleap-ntp_002dconf_002dfile">update-leap ntp-conf-file</a>,
+Next: <a rel="next" accesskey="n" href="#update_002dleap-ntp_002dconf_002dfile">update-leap ntp-conf-file</a>,
Previous: <a rel="previous" accesskey="p" href="#update_002dleap-destination">update-leap destination</a>,
Up: <a rel="up" accesskey="u" href="#update_002dleap-Invocation">update-leap Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.5 expiration option (-e)</h4>
imply more frequent refreshes.
"$PREFETCH"
<div class="node">
+<a name="update-leap-ntp-conf-file"></a>
+<a name="update_002dleap-ntp_002dconf_002dfile"></a>
<p><hr>
-
<a name="update_002dleap-ntp_002dconf_002dfile"></a>Next: <a rel="next" accesskey="n" href="#update_002dleap-force_002dupdate">update-leap force-update</a>,
+Next: <a rel="next" accesskey="n" href="#update_002dleap-force_002dupdate">update-leap force-update</a>,
Previous: <a rel="previous" accesskey="p" href="#update_002dleap-expiration">update-leap expiration</a>,
Up: <a rel="up" accesskey="u" href="#update_002dleap-Invocation">update-leap Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.6 ntp-conf-file option (-f)</h4>
present and to default leapfile)
/etc/ntp.conf
<div class="node">
+<a name="update-leap-force-update"></a>
+<a name="update_002dleap-force_002dupdate"></a>
<p><hr>
-
<a name="update_002dleap-force_002dupdate"></a>Next: <a rel="next" accesskey="n" href="#update_002dleap-exit-status">update-leap exit status</a>,
+Next: <a rel="next" accesskey="n" href="#update_002dleap-exit-status">update-leap exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#update_002dleap-ntp_002dconf_002dfile">update-leap ntp-conf-file</a>,
Up: <a rel="up" accesskey="u" href="#update_002dleap-Invocation">update-leap Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.7 force-update option (-F)</h4>
This is the “force update of the leapfile” option.
Force update even if current file is OK and not close to expiring.
<div class="node">
+<a name="update-leap-exit-status"></a>
+<a name="update_002dleap-exit-status"></a>
<p><hr>
-
<a name="update_002dleap-exit-status"></a>Next: <a rel="next" accesskey="n" href="#update_002dleap-Usage">update-leap Usage</a>,
+Next: <a rel="next" accesskey="n" href="#update_002dleap-Usage">update-leap Usage</a>,
Previous: <a rel="previous" accesskey="p" href="#update_002dleap-force_002dupdate">update-leap force-update</a>,
Up: <a rel="up" accesskey="u" href="#update_002dleap-Invocation">update-leap Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.8 update-leap exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
</dl>
<div class="node">
+<a name="update-leap-Usage"></a>
+<a name="update_002dleap-Usage"></a>
<p><hr>
-
<a name="update_002dleap-Usage"></a>Next: <a rel="next" accesskey="n" href="#update_002dleap-Authors">update-leap Authors</a>,
+Next: <a rel="next" accesskey="n" href="#update_002dleap-Authors">update-leap Authors</a>,
Previous: <a rel="previous" accesskey="p" href="#update_002dleap-exit-status">update-leap exit status</a>,
Up: <a rel="up" accesskey="u" href="#update_002dleap-Invocation">update-leap Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.9 update-leap Usage</h4>
<div class="node">
+<a name="update-leap-Authors"></a>
+<a name="update_002dleap-Authors"></a>
<p><hr>
-
<a name="update_002dleap-Authors"></a>Previous: <a rel="previous" accesskey="p" href="#update_002dleap-Usage">update-leap Usage</a>,
+Previous: <a rel="previous" accesskey="p" href="#update_002dleap-Usage">update-leap Usage</a>,
Up: <a rel="up" accesskey="u" href="#update_002dleap-Invocation">update-leap Invocation</a>
-<br>
+
</div>
<h4 class="subsection">0.1.10 update-leap Authors</h4>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH update-leap 1update-leapman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH update-leap 1update-leapman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-KSaamv/ag-XSailv)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:58:55 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:22:00 AM by AutoGen 5.18.5
.\" From the definitions update-leap-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt UPDATE_LEAP 1update-leapmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (update-leap-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:59:03 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:55 AM by AutoGen 5.18.5
.\" From the definitions update-leap-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-sntp.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 05:55:22 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:18:11 AM by AutoGen 5.18.5
# From the definitions sntp-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p4-RC1
+sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p4-sec-RC2
Usage: sntp [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... \
[ hostname-or-IP ...]
Flg Arg Option-Name Description
/*
* EDIT THIS FILE WITH CAUTION (sntp-opts.c)
*
- * It has been AutoGen-ed October 6, 2015 at 05:54:01 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:17:04 AM by AutoGen 5.18.5
* From the definitions sntp-opts.def
* and the template file options
*
#endif
extern FILE * option_usage_fp;
#define zCopyright (sntp_opt_strs+0)
-#define zLicenseDescrip (sntp_opt_strs+344)
+#define zLicenseDescrip (sntp_opt_strs+348)
/*
* global included definitions
/**
* static const strings for sntp options
*/
-static char const sntp_opt_strs[2561] =
-/* 0 */ "sntp 4.2.8p4-RC1\n"
+static char const sntp_opt_strs[2573] =
+/* 0 */ "sntp 4.2.8p4-sec-RC2\n"
"Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
"can be seen at:\n"
" <http://ntp.org/license>\n"
" <http://opensource.org/licenses/ntp-license.php>\n\0"
-/* 344 */ "Permission to use, copy, modify, and distribute this software and its\n"
+/* 348 */ "Permission to use, copy, modify, and distribute this software and its\n"
"documentation for any purpose with or without fee is hereby granted,\n"
"provided that the above copyright notice appears in all copies and that\n"
"both the copyright notice and this permission notice appear in supporting\n"
"Time Foundation makes no representations about the suitability this\n"
"software for any purpose. It is provided \"as is\" without express or\n"
"implied warranty.\n\0"
-/* 1012 */ "Force IPv4 DNS name resolution\0"
-/* 1043 */ "IPV4\0"
-/* 1048 */ "ipv4\0"
-/* 1053 */ "Force IPv6 DNS name resolution\0"
-/* 1084 */ "IPV6\0"
-/* 1089 */ "ipv6\0"
-/* 1094 */ "Enable authentication with the key auth-keynumber\0"
-/* 1144 */ "AUTHENTICATION\0"
-/* 1159 */ "authentication\0"
-/* 1174 */ "Listen to the address specified for broadcast time sync\0"
-/* 1230 */ "BROADCAST\0"
-/* 1240 */ "broadcast\0"
-/* 1250 */ "Concurrently query all IPs returned for host-name\0"
-/* 1300 */ "CONCURRENT\0"
-/* 1311 */ "concurrent\0"
-/* 1322 */ "Increase debug verbosity level\0"
-/* 1353 */ "DEBUG_LEVEL\0"
-/* 1365 */ "debug-level\0"
-/* 1377 */ "Set the debug verbosity level\0"
-/* 1407 */ "SET_DEBUG_LEVEL\0"
-/* 1423 */ "set-debug-level\0"
-/* 1439 */ "The gap (in milliseconds) between time requests\0"
-/* 1487 */ "GAP\0"
-/* 1491 */ "gap\0"
-/* 1495 */ "KoD history filename\0"
-/* 1516 */ "KOD\0"
-/* 1520 */ "kod\0"
-/* 1524 */ "/var/db/ntp-kod\0"
-/* 1540 */ "Look in this file for the key specified with -a\0"
-/* 1588 */ "KEYFILE\0"
-/* 1596 */ "keyfile\0"
-/* 1604 */ "Log to specified logfile\0"
-/* 1629 */ "LOGFILE\0"
-/* 1637 */ "logfile\0"
-/* 1645 */ "Adjustments less than steplimit msec will be slewed\0"
-/* 1697 */ "STEPLIMIT\0"
-/* 1707 */ "steplimit\0"
-/* 1717 */ "Send int as our NTP protocol version\0"
-/* 1754 */ "NTPVERSION\0"
-/* 1765 */ "ntpversion\0"
-/* 1776 */ "Use the NTP Reserved Port (port 123)\0"
-/* 1813 */ "USERESERVEDPORT\0"
-/* 1829 */ "usereservedport\0"
-/* 1845 */ "OK to 'step' the time with settimeofday(2)\0"
-/* 1888 */ "STEP\0"
-/* 1893 */ "step\0"
-/* 1898 */ "OK to 'slew' the time with adjtime(2)\0"
-/* 1936 */ "SLEW\0"
-/* 1941 */ "slew\0"
-/* 1946 */ "The number of seconds to wait for responses\0"
-/* 1990 */ "TIMEOUT\0"
-/* 1998 */ "timeout\0"
-/* 2006 */ "Wait for pending replies (if not setting the time)\0"
-/* 2057 */ "WAIT\0"
-/* 2062 */ "no-wait\0"
-/* 2070 */ "no\0"
-/* 2073 */ "display extended usage information and exit\0"
-/* 2117 */ "help\0"
-/* 2122 */ "extended usage information passed thru pager\0"
-/* 2167 */ "more-help\0"
-/* 2177 */ "output version information and exit\0"
-/* 2213 */ "version\0"
-/* 2221 */ "save the option state to a config file\0"
-/* 2260 */ "save-opts\0"
-/* 2270 */ "load options from a config file\0"
-/* 2302 */ "LOAD_OPTS\0"
-/* 2312 */ "no-load-opts\0"
-/* 2325 */ "SNTP\0"
-/* 2330 */ "sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p4-RC1\n"
+/* 1016 */ "Force IPv4 DNS name resolution\0"
+/* 1047 */ "IPV4\0"
+/* 1052 */ "ipv4\0"
+/* 1057 */ "Force IPv6 DNS name resolution\0"
+/* 1088 */ "IPV6\0"
+/* 1093 */ "ipv6\0"
+/* 1098 */ "Enable authentication with the key auth-keynumber\0"
+/* 1148 */ "AUTHENTICATION\0"
+/* 1163 */ "authentication\0"
+/* 1178 */ "Listen to the address specified for broadcast time sync\0"
+/* 1234 */ "BROADCAST\0"
+/* 1244 */ "broadcast\0"
+/* 1254 */ "Concurrently query all IPs returned for host-name\0"
+/* 1304 */ "CONCURRENT\0"
+/* 1315 */ "concurrent\0"
+/* 1326 */ "Increase debug verbosity level\0"
+/* 1357 */ "DEBUG_LEVEL\0"
+/* 1369 */ "debug-level\0"
+/* 1381 */ "Set the debug verbosity level\0"
+/* 1411 */ "SET_DEBUG_LEVEL\0"
+/* 1427 */ "set-debug-level\0"
+/* 1443 */ "The gap (in milliseconds) between time requests\0"
+/* 1491 */ "GAP\0"
+/* 1495 */ "gap\0"
+/* 1499 */ "KoD history filename\0"
+/* 1520 */ "KOD\0"
+/* 1524 */ "kod\0"
+/* 1528 */ "/var/db/ntp-kod\0"
+/* 1544 */ "Look in this file for the key specified with -a\0"
+/* 1592 */ "KEYFILE\0"
+/* 1600 */ "keyfile\0"
+/* 1608 */ "Log to specified logfile\0"
+/* 1633 */ "LOGFILE\0"
+/* 1641 */ "logfile\0"
+/* 1649 */ "Adjustments less than steplimit msec will be slewed\0"
+/* 1701 */ "STEPLIMIT\0"
+/* 1711 */ "steplimit\0"
+/* 1721 */ "Send int as our NTP protocol version\0"
+/* 1758 */ "NTPVERSION\0"
+/* 1769 */ "ntpversion\0"
+/* 1780 */ "Use the NTP Reserved Port (port 123)\0"
+/* 1817 */ "USERESERVEDPORT\0"
+/* 1833 */ "usereservedport\0"
+/* 1849 */ "OK to 'step' the time with settimeofday(2)\0"
+/* 1892 */ "STEP\0"
+/* 1897 */ "step\0"
+/* 1902 */ "OK to 'slew' the time with adjtime(2)\0"
+/* 1940 */ "SLEW\0"
+/* 1945 */ "slew\0"
+/* 1950 */ "The number of seconds to wait for responses\0"
+/* 1994 */ "TIMEOUT\0"
+/* 2002 */ "timeout\0"
+/* 2010 */ "Wait for pending replies (if not setting the time)\0"
+/* 2061 */ "WAIT\0"
+/* 2066 */ "no-wait\0"
+/* 2074 */ "no\0"
+/* 2077 */ "display extended usage information and exit\0"
+/* 2121 */ "help\0"
+/* 2126 */ "extended usage information passed thru pager\0"
+/* 2171 */ "more-help\0"
+/* 2181 */ "output version information and exit\0"
+/* 2217 */ "version\0"
+/* 2225 */ "save the option state to a config file\0"
+/* 2264 */ "save-opts\0"
+/* 2274 */ "load options from a config file\0"
+/* 2306 */ "LOAD_OPTS\0"
+/* 2316 */ "no-load-opts\0"
+/* 2329 */ "SNTP\0"
+/* 2334 */ "sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p4-sec-RC2\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \\\n"
"\t\t[ hostname-or-IP ...]\n\0"
-/* 2493 */ "$HOME\0"
-/* 2499 */ ".\0"
-/* 2501 */ ".ntprc\0"
-/* 2508 */ "http://bugs.ntp.org, bugs@ntp.org\0"
-/* 2542 */ "\n\0"
-/* 2544 */ "sntp 4.2.8p4-RC1";
+/* 2501 */ "$HOME\0"
+/* 2507 */ ".\0"
+/* 2509 */ ".ntprc\0"
+/* 2516 */ "http://bugs.ntp.org, bugs@ntp.org\0"
+/* 2550 */ "\n\0"
+/* 2552 */ "sntp 4.2.8p4-sec-RC2";
/**
* ipv4 option description with
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the ipv4 option */
-#define IPV4_DESC (sntp_opt_strs+1012)
+#define IPV4_DESC (sntp_opt_strs+1016)
/** Upper-cased name for the ipv4 option */
-#define IPV4_NAME (sntp_opt_strs+1043)
+#define IPV4_NAME (sntp_opt_strs+1047)
/** Name string for the ipv4 option */
-#define IPV4_name (sntp_opt_strs+1048)
+#define IPV4_name (sntp_opt_strs+1052)
/** Other options that appear in conjunction with the ipv4 option */
static int const aIpv4CantList[] = {
INDEX_OPT_IPV6, NO_EQUIVALENT };
* "Must also have options" and "Incompatible options":
*/
/** Descriptive text for the ipv6 option */
-#define IPV6_DESC (sntp_opt_strs+1053)
+#define IPV6_DESC (sntp_opt_strs+1057)
/** Upper-cased name for the ipv6 option */
-#define IPV6_NAME (sntp_opt_strs+1084)
+#define IPV6_NAME (sntp_opt_strs+1088)
/** Name string for the ipv6 option */
-#define IPV6_name (sntp_opt_strs+1089)
+#define IPV6_name (sntp_opt_strs+1093)
/** Other options that appear in conjunction with the ipv6 option */
static int const aIpv6CantList[] = {
INDEX_OPT_IPV4, NO_EQUIVALENT };
* authentication option description:
*/
/** Descriptive text for the authentication option */
-#define AUTHENTICATION_DESC (sntp_opt_strs+1094)
+#define AUTHENTICATION_DESC (sntp_opt_strs+1098)
/** Upper-cased name for the authentication option */
-#define AUTHENTICATION_NAME (sntp_opt_strs+1144)
+#define AUTHENTICATION_NAME (sntp_opt_strs+1148)
/** Name string for the authentication option */
-#define AUTHENTICATION_name (sntp_opt_strs+1159)
+#define AUTHENTICATION_name (sntp_opt_strs+1163)
/** Compiled in flag settings for the authentication option */
#define AUTHENTICATION_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
* broadcast option description:
*/
/** Descriptive text for the broadcast option */
-#define BROADCAST_DESC (sntp_opt_strs+1174)
+#define BROADCAST_DESC (sntp_opt_strs+1178)
/** Upper-cased name for the broadcast option */
-#define BROADCAST_NAME (sntp_opt_strs+1230)
+#define BROADCAST_NAME (sntp_opt_strs+1234)
/** Name string for the broadcast option */
-#define BROADCAST_name (sntp_opt_strs+1240)
+#define BROADCAST_name (sntp_opt_strs+1244)
/** Compiled in flag settings for the broadcast option */
#define BROADCAST_FLAGS (OPTST_DISABLED | OPTST_STACKED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* concurrent option description:
*/
/** Descriptive text for the concurrent option */
-#define CONCURRENT_DESC (sntp_opt_strs+1250)
+#define CONCURRENT_DESC (sntp_opt_strs+1254)
/** Upper-cased name for the concurrent option */
-#define CONCURRENT_NAME (sntp_opt_strs+1300)
+#define CONCURRENT_NAME (sntp_opt_strs+1304)
/** Name string for the concurrent option */
-#define CONCURRENT_name (sntp_opt_strs+1311)
+#define CONCURRENT_name (sntp_opt_strs+1315)
/** Compiled in flag settings for the concurrent option */
#define CONCURRENT_FLAGS (OPTST_DISABLED | OPTST_STACKED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* debug-level option description:
*/
/** Descriptive text for the debug-level option */
-#define DEBUG_LEVEL_DESC (sntp_opt_strs+1322)
+#define DEBUG_LEVEL_DESC (sntp_opt_strs+1326)
/** Upper-cased name for the debug-level option */
-#define DEBUG_LEVEL_NAME (sntp_opt_strs+1353)
+#define DEBUG_LEVEL_NAME (sntp_opt_strs+1357)
/** Name string for the debug-level option */
-#define DEBUG_LEVEL_name (sntp_opt_strs+1365)
+#define DEBUG_LEVEL_name (sntp_opt_strs+1369)
/** Compiled in flag settings for the debug-level option */
#define DEBUG_LEVEL_FLAGS (OPTST_DISABLED)
* set-debug-level option description:
*/
/** Descriptive text for the set-debug-level option */
-#define SET_DEBUG_LEVEL_DESC (sntp_opt_strs+1377)
+#define SET_DEBUG_LEVEL_DESC (sntp_opt_strs+1381)
/** Upper-cased name for the set-debug-level option */
-#define SET_DEBUG_LEVEL_NAME (sntp_opt_strs+1407)
+#define SET_DEBUG_LEVEL_NAME (sntp_opt_strs+1411)
/** Name string for the set-debug-level option */
-#define SET_DEBUG_LEVEL_name (sntp_opt_strs+1423)
+#define SET_DEBUG_LEVEL_name (sntp_opt_strs+1427)
/** Compiled in flag settings for the set-debug-level option */
#define SET_DEBUG_LEVEL_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
* gap option description:
*/
/** Descriptive text for the gap option */
-#define GAP_DESC (sntp_opt_strs+1439)
+#define GAP_DESC (sntp_opt_strs+1443)
/** Upper-cased name for the gap option */
-#define GAP_NAME (sntp_opt_strs+1487)
+#define GAP_NAME (sntp_opt_strs+1491)
/** Name string for the gap option */
-#define GAP_name (sntp_opt_strs+1491)
+#define GAP_name (sntp_opt_strs+1495)
/** The compiled in default value for the gap option argument */
#define GAP_DFT_ARG ((char const*)50)
/** Compiled in flag settings for the gap option */
* kod option description:
*/
/** Descriptive text for the kod option */
-#define KOD_DESC (sntp_opt_strs+1495)
+#define KOD_DESC (sntp_opt_strs+1499)
/** Upper-cased name for the kod option */
-#define KOD_NAME (sntp_opt_strs+1516)
+#define KOD_NAME (sntp_opt_strs+1520)
/** Name string for the kod option */
-#define KOD_name (sntp_opt_strs+1520)
+#define KOD_name (sntp_opt_strs+1524)
/** The compiled in default value for the kod option argument */
-#define KOD_DFT_ARG (sntp_opt_strs+1524)
+#define KOD_DFT_ARG (sntp_opt_strs+1528)
/** Compiled in flag settings for the kod option */
#define KOD_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_FILE))
* keyfile option description:
*/
/** Descriptive text for the keyfile option */
-#define KEYFILE_DESC (sntp_opt_strs+1540)
+#define KEYFILE_DESC (sntp_opt_strs+1544)
/** Upper-cased name for the keyfile option */
-#define KEYFILE_NAME (sntp_opt_strs+1588)
+#define KEYFILE_NAME (sntp_opt_strs+1592)
/** Name string for the keyfile option */
-#define KEYFILE_name (sntp_opt_strs+1596)
+#define KEYFILE_name (sntp_opt_strs+1600)
/** Compiled in flag settings for the keyfile option */
#define KEYFILE_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_FILE))
* logfile option description:
*/
/** Descriptive text for the logfile option */
-#define LOGFILE_DESC (sntp_opt_strs+1604)
+#define LOGFILE_DESC (sntp_opt_strs+1608)
/** Upper-cased name for the logfile option */
-#define LOGFILE_NAME (sntp_opt_strs+1629)
+#define LOGFILE_NAME (sntp_opt_strs+1633)
/** Name string for the logfile option */
-#define LOGFILE_name (sntp_opt_strs+1637)
+#define LOGFILE_name (sntp_opt_strs+1641)
/** Compiled in flag settings for the logfile option */
#define LOGFILE_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_FILE))
* steplimit option description:
*/
/** Descriptive text for the steplimit option */
-#define STEPLIMIT_DESC (sntp_opt_strs+1645)
+#define STEPLIMIT_DESC (sntp_opt_strs+1649)
/** Upper-cased name for the steplimit option */
-#define STEPLIMIT_NAME (sntp_opt_strs+1697)
+#define STEPLIMIT_NAME (sntp_opt_strs+1701)
/** Name string for the steplimit option */
-#define STEPLIMIT_name (sntp_opt_strs+1707)
+#define STEPLIMIT_name (sntp_opt_strs+1711)
/** Compiled in flag settings for the steplimit option */
#define STEPLIMIT_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
* ntpversion option description:
*/
/** Descriptive text for the ntpversion option */
-#define NTPVERSION_DESC (sntp_opt_strs+1717)
+#define NTPVERSION_DESC (sntp_opt_strs+1721)
/** Upper-cased name for the ntpversion option */
-#define NTPVERSION_NAME (sntp_opt_strs+1754)
+#define NTPVERSION_NAME (sntp_opt_strs+1758)
/** Name string for the ntpversion option */
-#define NTPVERSION_name (sntp_opt_strs+1765)
+#define NTPVERSION_name (sntp_opt_strs+1769)
/** The compiled in default value for the ntpversion option argument */
#define NTPVERSION_DFT_ARG ((char const*)4)
/** Compiled in flag settings for the ntpversion option */
* usereservedport option description:
*/
/** Descriptive text for the usereservedport option */
-#define USERESERVEDPORT_DESC (sntp_opt_strs+1776)
+#define USERESERVEDPORT_DESC (sntp_opt_strs+1780)
/** Upper-cased name for the usereservedport option */
-#define USERESERVEDPORT_NAME (sntp_opt_strs+1813)
+#define USERESERVEDPORT_NAME (sntp_opt_strs+1817)
/** Name string for the usereservedport option */
-#define USERESERVEDPORT_name (sntp_opt_strs+1829)
+#define USERESERVEDPORT_name (sntp_opt_strs+1833)
/** Compiled in flag settings for the usereservedport option */
#define USERESERVEDPORT_FLAGS (OPTST_DISABLED)
* step option description:
*/
/** Descriptive text for the step option */
-#define STEP_DESC (sntp_opt_strs+1845)
+#define STEP_DESC (sntp_opt_strs+1849)
/** Upper-cased name for the step option */
-#define STEP_NAME (sntp_opt_strs+1888)
+#define STEP_NAME (sntp_opt_strs+1892)
/** Name string for the step option */
-#define STEP_name (sntp_opt_strs+1893)
+#define STEP_name (sntp_opt_strs+1897)
/** Compiled in flag settings for the step option */
#define STEP_FLAGS (OPTST_DISABLED)
* slew option description:
*/
/** Descriptive text for the slew option */
-#define SLEW_DESC (sntp_opt_strs+1898)
+#define SLEW_DESC (sntp_opt_strs+1902)
/** Upper-cased name for the slew option */
-#define SLEW_NAME (sntp_opt_strs+1936)
+#define SLEW_NAME (sntp_opt_strs+1940)
/** Name string for the slew option */
-#define SLEW_name (sntp_opt_strs+1941)
+#define SLEW_name (sntp_opt_strs+1945)
/** Compiled in flag settings for the slew option */
#define SLEW_FLAGS (OPTST_DISABLED)
* timeout option description:
*/
/** Descriptive text for the timeout option */
-#define TIMEOUT_DESC (sntp_opt_strs+1946)
+#define TIMEOUT_DESC (sntp_opt_strs+1950)
/** Upper-cased name for the timeout option */
-#define TIMEOUT_NAME (sntp_opt_strs+1990)
+#define TIMEOUT_NAME (sntp_opt_strs+1994)
/** Name string for the timeout option */
-#define TIMEOUT_name (sntp_opt_strs+1998)
+#define TIMEOUT_name (sntp_opt_strs+2002)
/** The compiled in default value for the timeout option argument */
#define TIMEOUT_DFT_ARG ((char const*)5)
/** Compiled in flag settings for the timeout option */
* wait option description:
*/
/** Descriptive text for the wait option */
-#define WAIT_DESC (sntp_opt_strs+2006)
+#define WAIT_DESC (sntp_opt_strs+2010)
/** Upper-cased name for the wait option */
-#define WAIT_NAME (sntp_opt_strs+2057)
+#define WAIT_NAME (sntp_opt_strs+2061)
/** disablement name for the wait option */
-#define NOT_WAIT_name (sntp_opt_strs+2062)
+#define NOT_WAIT_name (sntp_opt_strs+2066)
/** disablement prefix for the wait option */
-#define NOT_WAIT_PFX (sntp_opt_strs+2070)
+#define NOT_WAIT_PFX (sntp_opt_strs+2074)
/** Name string for the wait option */
#define WAIT_name (NOT_WAIT_name + 3)
/** Compiled in flag settings for the wait option */
/*
* Help/More_Help/Version option descriptions:
*/
-#define HELP_DESC (sntp_opt_strs+2073)
-#define HELP_name (sntp_opt_strs+2117)
+#define HELP_DESC (sntp_opt_strs+2077)
+#define HELP_name (sntp_opt_strs+2121)
#ifdef HAVE_WORKING_FORK
-#define MORE_HELP_DESC (sntp_opt_strs+2122)
-#define MORE_HELP_name (sntp_opt_strs+2167)
+#define MORE_HELP_DESC (sntp_opt_strs+2126)
+#define MORE_HELP_name (sntp_opt_strs+2171)
#define MORE_HELP_FLAGS (OPTST_IMM | OPTST_NO_INIT)
#else
#define MORE_HELP_DESC HELP_DESC
# define VER_FLAGS (OPTST_SET_ARGTYPE(OPARG_TYPE_STRING) | \
OPTST_ARG_OPTIONAL | OPTST_IMM | OPTST_NO_INIT)
#endif
-#define VER_DESC (sntp_opt_strs+2177)
-#define VER_name (sntp_opt_strs+2213)
-#define SAVE_OPTS_DESC (sntp_opt_strs+2221)
-#define SAVE_OPTS_name (sntp_opt_strs+2260)
-#define LOAD_OPTS_DESC (sntp_opt_strs+2270)
-#define LOAD_OPTS_NAME (sntp_opt_strs+2302)
-#define NO_LOAD_OPTS_name (sntp_opt_strs+2312)
-#define LOAD_OPTS_pfx (sntp_opt_strs+2070)
+#define VER_DESC (sntp_opt_strs+2181)
+#define VER_name (sntp_opt_strs+2217)
+#define SAVE_OPTS_DESC (sntp_opt_strs+2225)
+#define SAVE_OPTS_name (sntp_opt_strs+2264)
+#define LOAD_OPTS_DESC (sntp_opt_strs+2274)
+#define LOAD_OPTS_NAME (sntp_opt_strs+2306)
+#define NO_LOAD_OPTS_name (sntp_opt_strs+2316)
+#define LOAD_OPTS_pfx (sntp_opt_strs+2074)
#define LOAD_OPTS_name (NO_LOAD_OPTS_name + 3)
/**
* Declare option callback procedures
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/** Reference to the upper cased version of sntp. */
-#define zPROGNAME (sntp_opt_strs+2325)
+#define zPROGNAME (sntp_opt_strs+2329)
/** Reference to the title line for sntp usage. */
-#define zUsageTitle (sntp_opt_strs+2330)
+#define zUsageTitle (sntp_opt_strs+2334)
/** sntp configuration file name. */
-#define zRcName (sntp_opt_strs+2501)
+#define zRcName (sntp_opt_strs+2509)
/** Directories to search for sntp config files. */
static char const * const apzHomeList[3] = {
- sntp_opt_strs+2493,
- sntp_opt_strs+2499,
+ sntp_opt_strs+2501,
+ sntp_opt_strs+2507,
NULL };
/** The sntp program bug email address. */
-#define zBugsAddr (sntp_opt_strs+2508)
+#define zBugsAddr (sntp_opt_strs+2516)
/** Clarification/explanation of what sntp does. */
-#define zExplain (sntp_opt_strs+2542)
+#define zExplain (sntp_opt_strs+2550)
/** Extra detail explaining what sntp does. */
#define zDetail (NULL)
/** The full version string for sntp. */
-#define zFullVersion (sntp_opt_strs+2544)
+#define zFullVersion (sntp_opt_strs+2552)
/* extracted from optcode.tlib near line 364 */
#if defined(ENABLE_NLS)
translate option names.
*/
/* referenced via sntpOptions.pzCopyright */
- puts(_("sntp 4.2.8p4-RC1\n\
+ puts(_("sntp 4.2.8p4-sec-RC2\n\
Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("load options from a config file"));
/* referenced via sntpOptions.pzUsageTitle */
- puts(_("sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p4-RC1\n\
+ puts(_("sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p4-sec-RC2\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \\\n\
\t\t[ hostname-or-IP ...]\n"));
puts(_("\n"));
/* referenced via sntpOptions.pzFullVersion */
- puts(_("sntp 4.2.8p4-RC1"));
+ puts(_("sntp 4.2.8p4-sec-RC2"));
/* referenced via sntpOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (sntp-opts.h)
*
- * It has been AutoGen-ed October 6, 2015 at 05:54:00 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:17:04 AM by AutoGen 5.18.5
* From the definitions sntp-opts.def
* and the template file options
*
/** count of all options for sntp */
#define OPTION_CT 23
/** sntp version */
-#define SNTP_VERSION "4.2.8p4-RC1"
+#define SNTP_VERSION "4.2.8p4-sec-RC2"
/** Full sntp version text */
-#define SNTP_FULL_VERSION "sntp 4.2.8p4-RC1"
+#define SNTP_FULL_VERSION "sntp 4.2.8p4-sec-RC2"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH sntp 1sntpman "06 Oct 2015" "4.2.8p4-RC1" "User Commands"
+.TH sntp 1sntpman "17 Oct 2015" "4.2.8p4-sec-RC2" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-i2ayF3/ag-u2aqE3)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:55:18 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:32 AM by AutoGen 5.18.5
.\" From the definitions sntp-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt SNTP 1sntpmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (sntp-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:55:25 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:18:08 AM by AutoGen 5.18.5
.\" From the definitions sntp-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>Sntp User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="Sntp User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">Sntp User's Manual</h1>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#sntp-Description">sntp Description</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-Description">sntp Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">Simple Network Time Protocol User Manual</h2>
clock. Run as root, it can correct the system clock to this offset as
well. It can be run as an interactive command or from a cron job.
- <p>This document applies to version 4.2.8p4-RC1 of <code>sntp</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>sntp</code>.
<p>The program implements the SNTP protocol as defined by RFC 5905, the NTPv4
IETF specification.
</ul>
<div class="node">
-<p><hr>
<a name="sntp-Description"></a>
-<br>
+<p><hr>
+
+
</div>
<!-- node-name, next, previous, up -->
error bound of the system clock relative to the server clock.
<div class="node">
-<p><hr>
<a name="sntp-Invocation"></a>
-<br>
+<p><hr>
+
+
</div>
<h3 class="section">Invoking sntp</h3>
This software is released under the NTP license, <http://ntp.org/license>.
<ul class="menu">
-<li><a accesskey="1" href="#sntp-usage">sntp usage</a>: sntp help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#sntp-usage">sntp usage</a>: sntp help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#sntp-ipv4">sntp ipv4</a>: ipv4 option (-4)
<li><a accesskey="3" href="#sntp-ipv6">sntp ipv6</a>: ipv6 option (-6)
<li><a accesskey="4" href="#sntp-authentication">sntp authentication</a>: authentication option (-a)
</ul>
<div class="node">
+<a name="sntp-usage"></a>
<p><hr>
-
<a name="sntp-usage"></a>Next: <a rel="next" accesskey="n" href="#sntp-ipv4">sntp ipv4</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-ipv4">sntp ipv4</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">sntp help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">sntp help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-sntp-help-3"></a>
This is the automatically generated usage text for sntp.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
-<pre class="example">sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p4-RC1
+<pre class="example">sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p4-sec-RC2
Usage: sntp [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \
[ hostname-or-IP ...]
Flg Arg Option-Name Description
Please send bug reports to: <http://bugs.ntp.org, bugs@ntp.org>
</pre>
<div class="node">
+<a name="sntp-ipv4"></a>
<p><hr>
-
<a name="sntp-ipv4"></a>Next: <a rel="next" accesskey="n" href="#sntp-ipv6">sntp ipv6</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-ipv6">sntp ipv6</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-usage">sntp usage</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ipv4 option (-4)</h4>
<p>Force DNS resolution of the following host names on the command line
to the IPv4 namespace.
<div class="node">
+<a name="sntp-ipv6"></a>
<p><hr>
-
<a name="sntp-ipv6"></a>Next: <a rel="next" accesskey="n" href="#sntp-authentication">sntp authentication</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-authentication">sntp authentication</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-ipv4">sntp ipv4</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ipv6 option (-6)</h4>
<p>Force DNS resolution of the following host names on the command line
to the IPv6 namespace.
<div class="node">
+<a name="sntp-authentication"></a>
<p><hr>
-
<a name="sntp-authentication"></a>Next: <a rel="next" accesskey="n" href="#sntp-broadcast">sntp broadcast</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-broadcast">sntp broadcast</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-ipv6">sntp ipv6</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">authentication option (-a)</h4>
<p><a name="index-sntp_002dauthentication-6"></a>
This is the “enable authentication with the key <var>auth-keynumber</var>” option.
-This option takes a number argument <span class="file">auth-keynumber</span>.
+This option takes a number argument <samp><span class="file">auth-keynumber</span></samp>.
Enable authentication using the key specified in this option's
-argument. The argument of this option is the <span class="option">keyid</span>, a
-number specified in the <span class="option">keyfile</span> as this key's identifier.
-See the <span class="option">keyfile</span> option (<span class="option">-k</span>) for more details.
+argument. The argument of this option is the <samp><span class="option">keyid</span></samp>, a
+number specified in the <samp><span class="option">keyfile</span></samp> as this key's identifier.
+See the <samp><span class="option">keyfile</span></samp> option (<samp><span class="option">-k</span></samp>) for more details.
<div class="node">
+<a name="sntp-broadcast"></a>
<p><hr>
-
<a name="sntp-broadcast"></a>Next: <a rel="next" accesskey="n" href="#sntp-concurrent">sntp concurrent</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-concurrent">sntp concurrent</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-authentication">sntp authentication</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">broadcast option (-b)</h4>
<p><a name="index-sntp_002dbroadcast-7"></a>
This is the “listen to the address specified for broadcast time sync” option.
-This option takes a string argument <span class="file">broadcast-address</span>.
+This option takes a string argument <samp><span class="file">broadcast-address</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
<p>If specified <code>sntp</code> will listen to the specified address
for NTP broadcasts. The default maximum wait time
-can (and probably should) be modified with <span class="option">-t</span>.
+can (and probably should) be modified with <samp><span class="option">-t</span></samp>.
<div class="node">
+<a name="sntp-concurrent"></a>
<p><hr>
-
<a name="sntp-concurrent"></a>Next: <a rel="next" accesskey="n" href="#sntp-gap">sntp gap</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-gap">sntp gap</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-broadcast">sntp broadcast</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">concurrent option (-c)</h4>
<p><a name="index-sntp_002dconcurrent-8"></a>
This is the “concurrently query all ips returned for host-name” option.
-This option takes a string argument <span class="file">host-name</span>.
+This option takes a string argument <samp><span class="file">host-name</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
<code>ntpd</code>, and therefore <code>sntp</code> will send queries to these IPs
one after another, with a 2-second gap in between each query.
- <p>The <span class="option">-c</span> or <span class="option">--concurrent</span> flag says that any IPs
+ <p>The <samp><span class="option">-c</span></samp> or <samp><span class="option">--concurrent</span></samp> flag says that any IPs
returned for the DNS lookup of the supplied host-name are on
different machines, so we can send concurrent queries.
<div class="node">
+<a name="sntp-gap"></a>
<p><hr>
-
<a name="sntp-gap"></a>Next: <a rel="next" accesskey="n" href="#sntp-kod">sntp kod</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-kod">sntp kod</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-concurrent">sntp concurrent</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">gap option (-g)</h4>
<p><a name="index-sntp_002dgap-9"></a>
This is the “the gap (in milliseconds) between time requests” option.
-This option takes a number argument <span class="file">milliseconds</span>.
+This option takes a number argument <samp><span class="file">milliseconds</span></samp>.
Since we're only going to use the first valid response we get and
there is benefit to specifying a good number of servers to query,
separate the queries we send out by the specified number of
milliseconds.
<div class="node">
+<a name="sntp-kod"></a>
<p><hr>
-
<a name="sntp-kod"></a>Next: <a rel="next" accesskey="n" href="#sntp-keyfile">sntp keyfile</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-keyfile">sntp keyfile</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-gap">sntp gap</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">kod option (-K)</h4>
<p><a name="index-sntp_002dkod-10"></a>
This is the “kod history filename” option.
-This option takes a file argument <span class="file">file-name</span>.
+This option takes a file argument <samp><span class="file">file-name</span></samp>.
Specifies the filename to be used for the persistent history of KoD
responses received from servers. If the file does not exist, a
warning message will be displayed. The file will not be created.
<div class="node">
+<a name="sntp-keyfile"></a>
<p><hr>
-
<a name="sntp-keyfile"></a>Next: <a rel="next" accesskey="n" href="#sntp-logfile">sntp logfile</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-logfile">sntp logfile</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-kod">sntp kod</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">keyfile option (-k)</h4>
<p><a name="index-sntp_002dkeyfile-11"></a>
-This is the “look in this file for the key specified with <span class="option">-a</span>” option.
-This option takes a file argument <span class="file">file-name</span>.
+This is the “look in this file for the key specified with <samp><span class="option">-a</span></samp>” option.
+This option takes a file argument <samp><span class="file">file-name</span></samp>.
This option specifies the keyfile.
-<code>sntp</code> will search for the key specified with <span class="option">-a</span>
-<span class="file">keyno</span> in this file. See <span class="command">ntp.keys(5)</span> for more
+<code>sntp</code> will search for the key specified with <samp><span class="option">-a</span></samp>
+<samp><span class="file">keyno</span></samp> in this file. See <samp><span class="command">ntp.keys(5)</span></samp> for more
information.
<div class="node">
+<a name="sntp-logfile"></a>
<p><hr>
-
<a name="sntp-logfile"></a>Next: <a rel="next" accesskey="n" href="#sntp-steplimit">sntp steplimit</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-steplimit">sntp steplimit</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-keyfile">sntp keyfile</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">logfile option (-l)</h4>
<p><a name="index-sntp_002dlogfile-12"></a>
This is the “log to specified logfile” option.
-This option takes a file argument <span class="file">file-name</span>.
+This option takes a file argument <samp><span class="file">file-name</span></samp>.
This option causes the client to write log messages to the specified
-<span class="file">logfile</span>.
+<samp><span class="file">logfile</span></samp>.
<div class="node">
+<a name="sntp-steplimit"></a>
<p><hr>
-
<a name="sntp-steplimit"></a>Next: <a rel="next" accesskey="n" href="#sntp-ntpversion">sntp ntpversion</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-ntpversion">sntp ntpversion</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-logfile">sntp logfile</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">steplimit option (-M)</h4>
<p><a name="index-sntp_002dsteplimit-13"></a>
This is the “adjustments less than <var>steplimit</var> msec will be slewed” option.
This option takes a number argument.
-If the time adjustment is less than <span class="file">steplimit</span> milliseconds,
-slew the amount using <span class="command">adjtime(2)</span>. Otherwise, step the
-correction using <span class="command">settimeofday(2)</span>. The default value is 0,
+If the time adjustment is less than <samp><span class="file">steplimit</span></samp> milliseconds,
+slew the amount using <samp><span class="command">adjtime(2)</span></samp>. Otherwise, step the
+correction using <samp><span class="command">settimeofday(2)</span></samp>. The default value is 0,
which means all adjustments will be stepped. This is a feature, as
different situations demand different values.
<div class="node">
+<a name="sntp-ntpversion"></a>
<p><hr>
-
<a name="sntp-ntpversion"></a>Next: <a rel="next" accesskey="n" href="#sntp-usereservedport">sntp usereservedport</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-usereservedport">sntp usereservedport</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-steplimit">sntp steplimit</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntpversion option (-o)</h4>
This is the “send <var>int</var> as our ntp protocol version” option.
This option takes a number argument.
When sending requests to a remote server, tell them we are running
-NTP protocol version <span class="file">ntpversion</span> .
+NTP protocol version <samp><span class="file">ntpversion</span></samp> .
<div class="node">
+<a name="sntp-usereservedport"></a>
<p><hr>
-
<a name="sntp-usereservedport"></a>Next: <a rel="next" accesskey="n" href="#sntp-timeout">sntp timeout</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-timeout">sntp timeout</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-ntpversion">sntp ntpversion</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">usereservedport option (-r)</h4>
Use port 123, which is reserved for NTP, for our network
communications.
<div class="node">
+<a name="sntp-timeout"></a>
<p><hr>
-
<a name="sntp-timeout"></a>Next: <a rel="next" accesskey="n" href="#sntp-wait">sntp wait</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-wait">sntp wait</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-usereservedport">sntp usereservedport</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">timeout option (-t)</h4>
<p><a name="index-sntp_002dtimeout-16"></a>
This is the “the number of seconds to wait for responses” option.
-This option takes a number argument <span class="file">seconds</span>.
+This option takes a number argument <samp><span class="file">seconds</span></samp>.
When waiting for a reply, <code>sntp</code> will wait the number
of seconds specified before giving up. The default should be
more than enough for a unicast response. If <code>sntp</code> is
only waiting for a broadcast response a longer timeout is
likely needed.
<div class="node">
+<a name="sntp-wait"></a>
<p><hr>
-
<a name="sntp-wait"></a>Next: <a rel="next" accesskey="n" href="#sntp-config">sntp config</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-config">sntp config</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-timeout">sntp timeout</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">wait option</h4>
<p>If we are not setting the time, wait for all pending responses.
<div class="node">
+<a name="sntp-config"></a>
<p><hr>
-
<a name="sntp-config"></a>Next: <a rel="next" accesskey="n" href="#sntp-exit-status">sntp exit status</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-exit-status">sntp exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-wait">sntp wait</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">presetting/configuring sntp</h4>
<li>$PWD
</ul>
The environment variables <code>HOME</code>, and <code>PWD</code>
-are expanded and replaced when <span class="file">sntp</span> runs.
+are expanded and replaced when <samp><span class="file">sntp</span></samp> runs.
For any of these that are plain files, they are simply processed.
-For any that are directories, then a file named <span class="file">.ntprc</span> is searched for
+For any that are directories, then a file named <samp><span class="file">.ntprc</span></samp> is searched for
within that directory and processed.
<p>Configuration files may be in a wide variety of formats.
Only the first letter of the argument is examined:
<dl>
-<dt><span class="samp">version</span><dd>Only print the version. This is the default.
-<br><dt><span class="samp">copyright</span><dd>Name the copyright usage licensing terms.
-<br><dt><span class="samp">verbose</span><dd>Print the full copyright usage licensing terms.
+<dt>‘<samp><span class="samp">version</span></samp>’<dd>Only print the version. This is the default.
+<br><dt>‘<samp><span class="samp">copyright</span></samp>’<dd>Name the copyright usage licensing terms.
+<br><dt>‘<samp><span class="samp">verbose</span></samp>’<dd>Print the full copyright usage licensing terms.
</dl>
<div class="node">
+<a name="sntp-exit-status"></a>
<p><hr>
-
<a name="sntp-exit-status"></a>Next: <a rel="next" accesskey="n" href="#sntp-Usage">sntp Usage</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-Usage">sntp Usage</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-config">sntp config</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">sntp exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
-<br><dt><span class="samp">66 (EX_NOINPUT)</span><dd>A specified configuration file could not be loaded.
-<br><dt><span class="samp">70 (EX_SOFTWARE)</span><dd>libopts had an internal operational error. Please report
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
+<br><dt>‘<samp><span class="samp">66 (EX_NOINPUT)</span></samp>’<dd>A specified configuration file could not be loaded.
+<br><dt>‘<samp><span class="samp">70 (EX_SOFTWARE)</span></samp>’<dd>libopts had an internal operational error. Please report
it to autogen-users@lists.sourceforge.net. Thank you.
</dl>
<div class="node">
+<a name="sntp-Usage"></a>
<p><hr>
-
<a name="sntp-Usage"></a>Next: <a rel="next" accesskey="n" href="#sntp-Authors">sntp Authors</a>,
+Next: <a rel="next" accesskey="n" href="#sntp-Authors">sntp Authors</a>,
Previous: <a rel="previous" accesskey="p" href="#sntp-exit-status">sntp exit status</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">sntp Usage</h4>
<div class="node">
+<a name="sntp-Authors"></a>
<p><hr>
-
<a name="sntp-Authors"></a>Previous: <a rel="previous" accesskey="p" href="#sntp-Usage">sntp Usage</a>,
+Previous: <a rel="previous" accesskey="p" href="#sntp-Usage">sntp Usage</a>,
Up: <a rel="up" accesskey="u" href="#sntp-Invocation">sntp Invocation</a>
-<br>
+
</div>
<h4 class="subsection">sntp Authors</h4>
<div class="node">
-<p><hr>
<a name="Usage"></a>
-<br>
+<p><hr>
+
+
</div>
<!-- node-name, next, previous, up -->
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH sntp @SNTP_MS@ "06 Oct 2015" "4.2.8p4-RC1" "User Commands"
+.TH sntp @SNTP_MS@ "17 Oct 2015" "4.2.8p4-sec-RC2" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-i2ayF3/ag-u2aqE3)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:55:18 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:21:32 AM by AutoGen 5.18.5
.\" From the definitions sntp-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt SNTP @SNTP_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (sntp-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 05:55:25 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:18:08 AM by AutoGen 5.18.5
.\" From the definitions sntp-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntp-keygen.texi)
#
-# It has been AutoGen-ed October 6, 2015 at 06:18:09 AM by AutoGen 5.18.5
+# It has been AutoGen-ed October 17, 2015 at 06:26:07 AM by AutoGen 5.18.5
# From the definitions ntp-keygen-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p4-RC1
+ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p4-sec-RC2
Usage: ntp-keygen [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
Flg Arg Option-Name Description
-b Num imbits identity modulus bits
/*
* EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.c)
*
- * It has been AutoGen-ed October 6, 2015 at 06:17:13 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:25:57 AM by AutoGen 5.18.5
* From the definitions ntp-keygen-opts.def
* and the template file options
*
#endif
extern FILE * option_usage_fp;
#define zCopyright (ntp_keygen_opt_strs+0)
-#define zLicenseDescrip (ntp_keygen_opt_strs+356)
+#define zLicenseDescrip (ntp_keygen_opt_strs+360)
/*
* global included definitions
/**
* static const strings for ntp-keygen options
*/
-static char const ntp_keygen_opt_strs[2431] =
-/* 0 */ "ntp-keygen (ntp) 4.2.8p4-RC1\n"
+static char const ntp_keygen_opt_strs[2443] =
+/* 0 */ "ntp-keygen (ntp) 4.2.8p4-sec-RC2\n"
"Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
"can be seen at:\n"
" <http://ntp.org/license>\n"
" <http://opensource.org/licenses/ntp-license.php>\n\0"
-/* 356 */ "Permission to use, copy, modify, and distribute this software and its\n"
+/* 360 */ "Permission to use, copy, modify, and distribute this software and its\n"
"documentation for any purpose with or without fee is hereby granted,\n"
"provided that the above copyright notice appears in all copies and that\n"
"both the copyright notice and this permission notice appear in supporting\n"
"Time Foundation makes no representations about the suitability this\n"
"software for any purpose. It is provided \"as is\" without express or\n"
"implied warranty.\n\0"
-/* 1024 */ "identity modulus bits\0"
-/* 1046 */ "IMBITS\0"
-/* 1053 */ "imbits\0"
-/* 1060 */ "certificate scheme\0"
-/* 1079 */ "CERTIFICATE\0"
-/* 1091 */ "certificate\0"
-/* 1103 */ "privatekey cipher\0"
-/* 1121 */ "CIPHER\0"
-/* 1128 */ "cipher\0"
-/* 1135 */ "Increase debug verbosity level\0"
-/* 1166 */ "DEBUG_LEVEL\0"
-/* 1178 */ "debug-level\0"
-/* 1190 */ "Set the debug verbosity level\0"
-/* 1220 */ "SET_DEBUG_LEVEL\0"
-/* 1236 */ "set-debug-level\0"
-/* 1252 */ "Write IFF or GQ identity keys\0"
-/* 1282 */ "ID_KEY\0"
-/* 1289 */ "id-key\0"
-/* 1296 */ "Generate GQ parameters and keys\0"
-/* 1328 */ "GQ_PARAMS\0"
-/* 1338 */ "gq-params\0"
-/* 1348 */ "generate RSA host key\0"
-/* 1370 */ "HOST_KEY\0"
-/* 1379 */ "host-key\0"
-/* 1388 */ "generate IFF parameters\0"
-/* 1412 */ "IFFKEY\0"
-/* 1419 */ "iffkey\0"
-/* 1426 */ "set Autokey group name\0"
-/* 1449 */ "IDENT\0"
-/* 1455 */ "ident\0"
-/* 1461 */ "set certificate lifetime\0"
-/* 1486 */ "LIFETIME\0"
-/* 1495 */ "lifetime\0"
-/* 1504 */ "generate MD5 keys\0"
-/* 1522 */ "MD5KEY\0"
-/* 1529 */ "md5key\0"
-/* 1536 */ "modulus\0"
-/* 1544 */ "MODULUS\0"
-/* 1552 */ "generate PC private certificate\0"
-/* 1584 */ "PVT_CERT\0"
-/* 1593 */ "pvt-cert\0"
-/* 1602 */ "local private password\0"
-/* 1625 */ "PASSWORD\0"
-/* 1634 */ "password\0"
-/* 1643 */ "export IFF or GQ group keys with password\0"
-/* 1685 */ "EXPORT_PASSWD\0"
-/* 1699 */ "export-passwd\0"
-/* 1713 */ "generate sign key (RSA or DSA)\0"
-/* 1744 */ "SIGN_KEY\0"
-/* 1753 */ "sign-key\0"
-/* 1762 */ "set host and optionally group name\0"
-/* 1797 */ "SUBJECT_NAME\0"
-/* 1810 */ "subject-name\0"
-/* 1823 */ "trusted certificate (TC scheme)\0"
-/* 1855 */ "TRUSTED_CERT\0"
-/* 1868 */ "trusted-cert\0"
-/* 1881 */ "generate <num> MV parameters\0"
-/* 1910 */ "MV_PARAMS\0"
-/* 1920 */ "mv-params\0"
-/* 1930 */ "update <num> MV keys\0"
-/* 1951 */ "MV_KEYS\0"
-/* 1959 */ "mv-keys\0"
-/* 1967 */ "display extended usage information and exit\0"
-/* 2011 */ "help\0"
-/* 2016 */ "extended usage information passed thru pager\0"
-/* 2061 */ "more-help\0"
-/* 2071 */ "output version information and exit\0"
-/* 2107 */ "version\0"
-/* 2115 */ "save the option state to a config file\0"
-/* 2154 */ "save-opts\0"
-/* 2164 */ "load options from a config file\0"
-/* 2196 */ "LOAD_OPTS\0"
-/* 2206 */ "no-load-opts\0"
-/* 2219 */ "no\0"
-/* 2222 */ "NTP_KEYGEN\0"
-/* 2233 */ "ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p4-RC1\n"
+/* 1028 */ "identity modulus bits\0"
+/* 1050 */ "IMBITS\0"
+/* 1057 */ "imbits\0"
+/* 1064 */ "certificate scheme\0"
+/* 1083 */ "CERTIFICATE\0"
+/* 1095 */ "certificate\0"
+/* 1107 */ "privatekey cipher\0"
+/* 1125 */ "CIPHER\0"
+/* 1132 */ "cipher\0"
+/* 1139 */ "Increase debug verbosity level\0"
+/* 1170 */ "DEBUG_LEVEL\0"
+/* 1182 */ "debug-level\0"
+/* 1194 */ "Set the debug verbosity level\0"
+/* 1224 */ "SET_DEBUG_LEVEL\0"
+/* 1240 */ "set-debug-level\0"
+/* 1256 */ "Write IFF or GQ identity keys\0"
+/* 1286 */ "ID_KEY\0"
+/* 1293 */ "id-key\0"
+/* 1300 */ "Generate GQ parameters and keys\0"
+/* 1332 */ "GQ_PARAMS\0"
+/* 1342 */ "gq-params\0"
+/* 1352 */ "generate RSA host key\0"
+/* 1374 */ "HOST_KEY\0"
+/* 1383 */ "host-key\0"
+/* 1392 */ "generate IFF parameters\0"
+/* 1416 */ "IFFKEY\0"
+/* 1423 */ "iffkey\0"
+/* 1430 */ "set Autokey group name\0"
+/* 1453 */ "IDENT\0"
+/* 1459 */ "ident\0"
+/* 1465 */ "set certificate lifetime\0"
+/* 1490 */ "LIFETIME\0"
+/* 1499 */ "lifetime\0"
+/* 1508 */ "generate MD5 keys\0"
+/* 1526 */ "MD5KEY\0"
+/* 1533 */ "md5key\0"
+/* 1540 */ "modulus\0"
+/* 1548 */ "MODULUS\0"
+/* 1556 */ "generate PC private certificate\0"
+/* 1588 */ "PVT_CERT\0"
+/* 1597 */ "pvt-cert\0"
+/* 1606 */ "local private password\0"
+/* 1629 */ "PASSWORD\0"
+/* 1638 */ "password\0"
+/* 1647 */ "export IFF or GQ group keys with password\0"
+/* 1689 */ "EXPORT_PASSWD\0"
+/* 1703 */ "export-passwd\0"
+/* 1717 */ "generate sign key (RSA or DSA)\0"
+/* 1748 */ "SIGN_KEY\0"
+/* 1757 */ "sign-key\0"
+/* 1766 */ "set host and optionally group name\0"
+/* 1801 */ "SUBJECT_NAME\0"
+/* 1814 */ "subject-name\0"
+/* 1827 */ "trusted certificate (TC scheme)\0"
+/* 1859 */ "TRUSTED_CERT\0"
+/* 1872 */ "trusted-cert\0"
+/* 1885 */ "generate <num> MV parameters\0"
+/* 1914 */ "MV_PARAMS\0"
+/* 1924 */ "mv-params\0"
+/* 1934 */ "update <num> MV keys\0"
+/* 1955 */ "MV_KEYS\0"
+/* 1963 */ "mv-keys\0"
+/* 1971 */ "display extended usage information and exit\0"
+/* 2015 */ "help\0"
+/* 2020 */ "extended usage information passed thru pager\0"
+/* 2065 */ "more-help\0"
+/* 2075 */ "output version information and exit\0"
+/* 2111 */ "version\0"
+/* 2119 */ "save the option state to a config file\0"
+/* 2158 */ "save-opts\0"
+/* 2168 */ "load options from a config file\0"
+/* 2200 */ "LOAD_OPTS\0"
+/* 2210 */ "no-load-opts\0"
+/* 2223 */ "no\0"
+/* 2226 */ "NTP_KEYGEN\0"
+/* 2237 */ "ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p4-sec-RC2\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]...\n\0"
-/* 2351 */ "$HOME\0"
-/* 2357 */ ".\0"
-/* 2359 */ ".ntprc\0"
-/* 2366 */ "http://bugs.ntp.org, bugs@ntp.org\0"
-/* 2400 */ "\n\0"
-/* 2402 */ "ntp-keygen (ntp) 4.2.8p4-RC1";
+/* 2359 */ "$HOME\0"
+/* 2365 */ ".\0"
+/* 2367 */ ".ntprc\0"
+/* 2374 */ "http://bugs.ntp.org, bugs@ntp.org\0"
+/* 2408 */ "\n\0"
+/* 2410 */ "ntp-keygen (ntp) 4.2.8p4-sec-RC2";
/**
* imbits option description:
*/
#ifdef AUTOKEY
/** Descriptive text for the imbits option */
-#define IMBITS_DESC (ntp_keygen_opt_strs+1024)
+#define IMBITS_DESC (ntp_keygen_opt_strs+1028)
/** Upper-cased name for the imbits option */
-#define IMBITS_NAME (ntp_keygen_opt_strs+1046)
+#define IMBITS_NAME (ntp_keygen_opt_strs+1050)
/** Name string for the imbits option */
-#define IMBITS_name (ntp_keygen_opt_strs+1053)
+#define IMBITS_name (ntp_keygen_opt_strs+1057)
/** Compiled in flag settings for the imbits option */
#define IMBITS_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
*/
#ifdef AUTOKEY
/** Descriptive text for the certificate option */
-#define CERTIFICATE_DESC (ntp_keygen_opt_strs+1060)
+#define CERTIFICATE_DESC (ntp_keygen_opt_strs+1064)
/** Upper-cased name for the certificate option */
-#define CERTIFICATE_NAME (ntp_keygen_opt_strs+1079)
+#define CERTIFICATE_NAME (ntp_keygen_opt_strs+1083)
/** Name string for the certificate option */
-#define CERTIFICATE_name (ntp_keygen_opt_strs+1091)
+#define CERTIFICATE_name (ntp_keygen_opt_strs+1095)
/** Compiled in flag settings for the certificate option */
#define CERTIFICATE_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
*/
#ifdef AUTOKEY
/** Descriptive text for the cipher option */
-#define CIPHER_DESC (ntp_keygen_opt_strs+1103)
+#define CIPHER_DESC (ntp_keygen_opt_strs+1107)
/** Upper-cased name for the cipher option */
-#define CIPHER_NAME (ntp_keygen_opt_strs+1121)
+#define CIPHER_NAME (ntp_keygen_opt_strs+1125)
/** Name string for the cipher option */
-#define CIPHER_name (ntp_keygen_opt_strs+1128)
+#define CIPHER_name (ntp_keygen_opt_strs+1132)
/** Compiled in flag settings for the cipher option */
#define CIPHER_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
* debug-level option description:
*/
/** Descriptive text for the debug-level option */
-#define DEBUG_LEVEL_DESC (ntp_keygen_opt_strs+1135)
+#define DEBUG_LEVEL_DESC (ntp_keygen_opt_strs+1139)
/** Upper-cased name for the debug-level option */
-#define DEBUG_LEVEL_NAME (ntp_keygen_opt_strs+1166)
+#define DEBUG_LEVEL_NAME (ntp_keygen_opt_strs+1170)
/** Name string for the debug-level option */
-#define DEBUG_LEVEL_name (ntp_keygen_opt_strs+1178)
+#define DEBUG_LEVEL_name (ntp_keygen_opt_strs+1182)
/** Compiled in flag settings for the debug-level option */
#define DEBUG_LEVEL_FLAGS (OPTST_DISABLED)
* set-debug-level option description:
*/
/** Descriptive text for the set-debug-level option */
-#define SET_DEBUG_LEVEL_DESC (ntp_keygen_opt_strs+1190)
+#define SET_DEBUG_LEVEL_DESC (ntp_keygen_opt_strs+1194)
/** Upper-cased name for the set-debug-level option */
-#define SET_DEBUG_LEVEL_NAME (ntp_keygen_opt_strs+1220)
+#define SET_DEBUG_LEVEL_NAME (ntp_keygen_opt_strs+1224)
/** Name string for the set-debug-level option */
-#define SET_DEBUG_LEVEL_name (ntp_keygen_opt_strs+1236)
+#define SET_DEBUG_LEVEL_name (ntp_keygen_opt_strs+1240)
/** Compiled in flag settings for the set-debug-level option */
#define SET_DEBUG_LEVEL_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
*/
#ifdef AUTOKEY
/** Descriptive text for the id-key option */
-#define ID_KEY_DESC (ntp_keygen_opt_strs+1252)
+#define ID_KEY_DESC (ntp_keygen_opt_strs+1256)
/** Upper-cased name for the id-key option */
-#define ID_KEY_NAME (ntp_keygen_opt_strs+1282)
+#define ID_KEY_NAME (ntp_keygen_opt_strs+1286)
/** Name string for the id-key option */
-#define ID_KEY_name (ntp_keygen_opt_strs+1289)
+#define ID_KEY_name (ntp_keygen_opt_strs+1293)
/** Compiled in flag settings for the id-key option */
#define ID_KEY_FLAGS (OPTST_DISABLED)
*/
#ifdef AUTOKEY
/** Descriptive text for the gq-params option */
-#define GQ_PARAMS_DESC (ntp_keygen_opt_strs+1296)
+#define GQ_PARAMS_DESC (ntp_keygen_opt_strs+1300)
/** Upper-cased name for the gq-params option */
-#define GQ_PARAMS_NAME (ntp_keygen_opt_strs+1328)
+#define GQ_PARAMS_NAME (ntp_keygen_opt_strs+1332)
/** Name string for the gq-params option */
-#define GQ_PARAMS_name (ntp_keygen_opt_strs+1338)
+#define GQ_PARAMS_name (ntp_keygen_opt_strs+1342)
/** Compiled in flag settings for the gq-params option */
#define GQ_PARAMS_FLAGS (OPTST_DISABLED)
*/
#ifdef AUTOKEY
/** Descriptive text for the host-key option */
-#define HOST_KEY_DESC (ntp_keygen_opt_strs+1348)
+#define HOST_KEY_DESC (ntp_keygen_opt_strs+1352)
/** Upper-cased name for the host-key option */
-#define HOST_KEY_NAME (ntp_keygen_opt_strs+1370)
+#define HOST_KEY_NAME (ntp_keygen_opt_strs+1374)
/** Name string for the host-key option */
-#define HOST_KEY_name (ntp_keygen_opt_strs+1379)
+#define HOST_KEY_name (ntp_keygen_opt_strs+1383)
/** Compiled in flag settings for the host-key option */
#define HOST_KEY_FLAGS (OPTST_DISABLED)
*/
#ifdef AUTOKEY
/** Descriptive text for the iffkey option */
-#define IFFKEY_DESC (ntp_keygen_opt_strs+1388)
+#define IFFKEY_DESC (ntp_keygen_opt_strs+1392)
/** Upper-cased name for the iffkey option */
-#define IFFKEY_NAME (ntp_keygen_opt_strs+1412)
+#define IFFKEY_NAME (ntp_keygen_opt_strs+1416)
/** Name string for the iffkey option */
-#define IFFKEY_name (ntp_keygen_opt_strs+1419)
+#define IFFKEY_name (ntp_keygen_opt_strs+1423)
/** Compiled in flag settings for the iffkey option */
#define IFFKEY_FLAGS (OPTST_DISABLED)
*/
#ifdef AUTOKEY
/** Descriptive text for the ident option */
-#define IDENT_DESC (ntp_keygen_opt_strs+1426)
+#define IDENT_DESC (ntp_keygen_opt_strs+1430)
/** Upper-cased name for the ident option */
-#define IDENT_NAME (ntp_keygen_opt_strs+1449)
+#define IDENT_NAME (ntp_keygen_opt_strs+1453)
/** Name string for the ident option */
-#define IDENT_name (ntp_keygen_opt_strs+1455)
+#define IDENT_name (ntp_keygen_opt_strs+1459)
/** Compiled in flag settings for the ident option */
#define IDENT_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
*/
#ifdef AUTOKEY
/** Descriptive text for the lifetime option */
-#define LIFETIME_DESC (ntp_keygen_opt_strs+1461)
+#define LIFETIME_DESC (ntp_keygen_opt_strs+1465)
/** Upper-cased name for the lifetime option */
-#define LIFETIME_NAME (ntp_keygen_opt_strs+1486)
+#define LIFETIME_NAME (ntp_keygen_opt_strs+1490)
/** Name string for the lifetime option */
-#define LIFETIME_name (ntp_keygen_opt_strs+1495)
+#define LIFETIME_name (ntp_keygen_opt_strs+1499)
/** Compiled in flag settings for the lifetime option */
#define LIFETIME_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
* md5key option description:
*/
/** Descriptive text for the md5key option */
-#define MD5KEY_DESC (ntp_keygen_opt_strs+1504)
+#define MD5KEY_DESC (ntp_keygen_opt_strs+1508)
/** Upper-cased name for the md5key option */
-#define MD5KEY_NAME (ntp_keygen_opt_strs+1522)
+#define MD5KEY_NAME (ntp_keygen_opt_strs+1526)
/** Name string for the md5key option */
-#define MD5KEY_name (ntp_keygen_opt_strs+1529)
+#define MD5KEY_name (ntp_keygen_opt_strs+1533)
/** Compiled in flag settings for the md5key option */
#define MD5KEY_FLAGS (OPTST_DISABLED)
*/
#ifdef AUTOKEY
/** Descriptive text for the modulus option */
-#define MODULUS_DESC (ntp_keygen_opt_strs+1536)
+#define MODULUS_DESC (ntp_keygen_opt_strs+1540)
/** Upper-cased name for the modulus option */
-#define MODULUS_NAME (ntp_keygen_opt_strs+1544)
+#define MODULUS_NAME (ntp_keygen_opt_strs+1548)
/** Name string for the modulus option */
-#define MODULUS_name (ntp_keygen_opt_strs+1536)
+#define MODULUS_name (ntp_keygen_opt_strs+1540)
/** Compiled in flag settings for the modulus option */
#define MODULUS_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
*/
#ifdef AUTOKEY
/** Descriptive text for the pvt-cert option */
-#define PVT_CERT_DESC (ntp_keygen_opt_strs+1552)
+#define PVT_CERT_DESC (ntp_keygen_opt_strs+1556)
/** Upper-cased name for the pvt-cert option */
-#define PVT_CERT_NAME (ntp_keygen_opt_strs+1584)
+#define PVT_CERT_NAME (ntp_keygen_opt_strs+1588)
/** Name string for the pvt-cert option */
-#define PVT_CERT_name (ntp_keygen_opt_strs+1593)
+#define PVT_CERT_name (ntp_keygen_opt_strs+1597)
/** Compiled in flag settings for the pvt-cert option */
#define PVT_CERT_FLAGS (OPTST_DISABLED)
*/
#ifdef AUTOKEY
/** Descriptive text for the password option */
-#define PASSWORD_DESC (ntp_keygen_opt_strs+1602)
+#define PASSWORD_DESC (ntp_keygen_opt_strs+1606)
/** Upper-cased name for the password option */
-#define PASSWORD_NAME (ntp_keygen_opt_strs+1625)
+#define PASSWORD_NAME (ntp_keygen_opt_strs+1629)
/** Name string for the password option */
-#define PASSWORD_name (ntp_keygen_opt_strs+1634)
+#define PASSWORD_name (ntp_keygen_opt_strs+1638)
/** Compiled in flag settings for the password option */
#define PASSWORD_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
*/
#ifdef AUTOKEY
/** Descriptive text for the export-passwd option */
-#define EXPORT_PASSWD_DESC (ntp_keygen_opt_strs+1643)
+#define EXPORT_PASSWD_DESC (ntp_keygen_opt_strs+1647)
/** Upper-cased name for the export-passwd option */
-#define EXPORT_PASSWD_NAME (ntp_keygen_opt_strs+1685)
+#define EXPORT_PASSWD_NAME (ntp_keygen_opt_strs+1689)
/** Name string for the export-passwd option */
-#define EXPORT_PASSWD_name (ntp_keygen_opt_strs+1699)
+#define EXPORT_PASSWD_name (ntp_keygen_opt_strs+1703)
/** Compiled in flag settings for the export-passwd option */
#define EXPORT_PASSWD_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
*/
#ifdef AUTOKEY
/** Descriptive text for the sign-key option */
-#define SIGN_KEY_DESC (ntp_keygen_opt_strs+1713)
+#define SIGN_KEY_DESC (ntp_keygen_opt_strs+1717)
/** Upper-cased name for the sign-key option */
-#define SIGN_KEY_NAME (ntp_keygen_opt_strs+1744)
+#define SIGN_KEY_NAME (ntp_keygen_opt_strs+1748)
/** Name string for the sign-key option */
-#define SIGN_KEY_name (ntp_keygen_opt_strs+1753)
+#define SIGN_KEY_name (ntp_keygen_opt_strs+1757)
/** Compiled in flag settings for the sign-key option */
#define SIGN_KEY_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
*/
#ifdef AUTOKEY
/** Descriptive text for the subject-name option */
-#define SUBJECT_NAME_DESC (ntp_keygen_opt_strs+1762)
+#define SUBJECT_NAME_DESC (ntp_keygen_opt_strs+1766)
/** Upper-cased name for the subject-name option */
-#define SUBJECT_NAME_NAME (ntp_keygen_opt_strs+1797)
+#define SUBJECT_NAME_NAME (ntp_keygen_opt_strs+1801)
/** Name string for the subject-name option */
-#define SUBJECT_NAME_name (ntp_keygen_opt_strs+1810)
+#define SUBJECT_NAME_name (ntp_keygen_opt_strs+1814)
/** Compiled in flag settings for the subject-name option */
#define SUBJECT_NAME_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_STRING))
*/
#ifdef AUTOKEY
/** Descriptive text for the trusted-cert option */
-#define TRUSTED_CERT_DESC (ntp_keygen_opt_strs+1823)
+#define TRUSTED_CERT_DESC (ntp_keygen_opt_strs+1827)
/** Upper-cased name for the trusted-cert option */
-#define TRUSTED_CERT_NAME (ntp_keygen_opt_strs+1855)
+#define TRUSTED_CERT_NAME (ntp_keygen_opt_strs+1859)
/** Name string for the trusted-cert option */
-#define TRUSTED_CERT_name (ntp_keygen_opt_strs+1868)
+#define TRUSTED_CERT_name (ntp_keygen_opt_strs+1872)
/** Compiled in flag settings for the trusted-cert option */
#define TRUSTED_CERT_FLAGS (OPTST_DISABLED)
*/
#ifdef AUTOKEY
/** Descriptive text for the mv-params option */
-#define MV_PARAMS_DESC (ntp_keygen_opt_strs+1881)
+#define MV_PARAMS_DESC (ntp_keygen_opt_strs+1885)
/** Upper-cased name for the mv-params option */
-#define MV_PARAMS_NAME (ntp_keygen_opt_strs+1910)
+#define MV_PARAMS_NAME (ntp_keygen_opt_strs+1914)
/** Name string for the mv-params option */
-#define MV_PARAMS_name (ntp_keygen_opt_strs+1920)
+#define MV_PARAMS_name (ntp_keygen_opt_strs+1924)
/** Compiled in flag settings for the mv-params option */
#define MV_PARAMS_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
*/
#ifdef AUTOKEY
/** Descriptive text for the mv-keys option */
-#define MV_KEYS_DESC (ntp_keygen_opt_strs+1930)
+#define MV_KEYS_DESC (ntp_keygen_opt_strs+1934)
/** Upper-cased name for the mv-keys option */
-#define MV_KEYS_NAME (ntp_keygen_opt_strs+1951)
+#define MV_KEYS_NAME (ntp_keygen_opt_strs+1955)
/** Name string for the mv-keys option */
-#define MV_KEYS_name (ntp_keygen_opt_strs+1959)
+#define MV_KEYS_name (ntp_keygen_opt_strs+1963)
/** Compiled in flag settings for the mv-keys option */
#define MV_KEYS_FLAGS (OPTST_DISABLED \
| OPTST_SET_ARGTYPE(OPARG_TYPE_NUMERIC))
/*
* Help/More_Help/Version option descriptions:
*/
-#define HELP_DESC (ntp_keygen_opt_strs+1967)
-#define HELP_name (ntp_keygen_opt_strs+2011)
+#define HELP_DESC (ntp_keygen_opt_strs+1971)
+#define HELP_name (ntp_keygen_opt_strs+2015)
#ifdef HAVE_WORKING_FORK
-#define MORE_HELP_DESC (ntp_keygen_opt_strs+2016)
-#define MORE_HELP_name (ntp_keygen_opt_strs+2061)
+#define MORE_HELP_DESC (ntp_keygen_opt_strs+2020)
+#define MORE_HELP_name (ntp_keygen_opt_strs+2065)
#define MORE_HELP_FLAGS (OPTST_IMM | OPTST_NO_INIT)
#else
#define MORE_HELP_DESC HELP_DESC
# define VER_FLAGS (OPTST_SET_ARGTYPE(OPARG_TYPE_STRING) | \
OPTST_ARG_OPTIONAL | OPTST_IMM | OPTST_NO_INIT)
#endif
-#define VER_DESC (ntp_keygen_opt_strs+2071)
-#define VER_name (ntp_keygen_opt_strs+2107)
-#define SAVE_OPTS_DESC (ntp_keygen_opt_strs+2115)
-#define SAVE_OPTS_name (ntp_keygen_opt_strs+2154)
-#define LOAD_OPTS_DESC (ntp_keygen_opt_strs+2164)
-#define LOAD_OPTS_NAME (ntp_keygen_opt_strs+2196)
-#define NO_LOAD_OPTS_name (ntp_keygen_opt_strs+2206)
-#define LOAD_OPTS_pfx (ntp_keygen_opt_strs+2219)
+#define VER_DESC (ntp_keygen_opt_strs+2075)
+#define VER_name (ntp_keygen_opt_strs+2111)
+#define SAVE_OPTS_DESC (ntp_keygen_opt_strs+2119)
+#define SAVE_OPTS_name (ntp_keygen_opt_strs+2158)
+#define LOAD_OPTS_DESC (ntp_keygen_opt_strs+2168)
+#define LOAD_OPTS_NAME (ntp_keygen_opt_strs+2200)
+#define NO_LOAD_OPTS_name (ntp_keygen_opt_strs+2210)
+#define LOAD_OPTS_pfx (ntp_keygen_opt_strs+2223)
#define LOAD_OPTS_name (NO_LOAD_OPTS_name + 3)
/**
* Declare option callback procedures
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/** Reference to the upper cased version of ntp-keygen. */
-#define zPROGNAME (ntp_keygen_opt_strs+2222)
+#define zPROGNAME (ntp_keygen_opt_strs+2226)
/** Reference to the title line for ntp-keygen usage. */
-#define zUsageTitle (ntp_keygen_opt_strs+2233)
+#define zUsageTitle (ntp_keygen_opt_strs+2237)
/** ntp-keygen configuration file name. */
-#define zRcName (ntp_keygen_opt_strs+2359)
+#define zRcName (ntp_keygen_opt_strs+2367)
/** Directories to search for ntp-keygen config files. */
static char const * const apzHomeList[3] = {
- ntp_keygen_opt_strs+2351,
- ntp_keygen_opt_strs+2357,
+ ntp_keygen_opt_strs+2359,
+ ntp_keygen_opt_strs+2365,
NULL };
/** The ntp-keygen program bug email address. */
-#define zBugsAddr (ntp_keygen_opt_strs+2366)
+#define zBugsAddr (ntp_keygen_opt_strs+2374)
/** Clarification/explanation of what ntp-keygen does. */
-#define zExplain (ntp_keygen_opt_strs+2400)
+#define zExplain (ntp_keygen_opt_strs+2408)
/** Extra detail explaining what ntp-keygen does. */
#define zDetail (NULL)
/** The full version string for ntp-keygen. */
-#define zFullVersion (ntp_keygen_opt_strs+2402)
+#define zFullVersion (ntp_keygen_opt_strs+2410)
/* extracted from optcode.tlib near line 364 */
#if defined(ENABLE_NLS)
translate option names.
*/
/* referenced via ntp_keygenOptions.pzCopyright */
- puts(_("ntp-keygen (ntp) 4.2.8p4-RC1\n\
+ puts(_("ntp-keygen (ntp) 4.2.8p4-sec-RC2\n\
Copyright (C) 1992-2015 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("load options from a config file"));
/* referenced via ntp_keygenOptions.pzUsageTitle */
- puts(_("ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p4-RC1\n\
+ puts(_("ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p4-sec-RC2\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]...\n"));
/* referenced via ntp_keygenOptions.pzExplain */
puts(_("\n"));
/* referenced via ntp_keygenOptions.pzFullVersion */
- puts(_("ntp-keygen (ntp) 4.2.8p4-RC1"));
+ puts(_("ntp-keygen (ntp) 4.2.8p4-sec-RC2"));
/* referenced via ntp_keygenOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.h)
*
- * It has been AutoGen-ed October 6, 2015 at 06:17:12 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed October 17, 2015 at 06:25:57 AM by AutoGen 5.18.5
* From the definitions ntp-keygen-opts.def
* and the template file options
*
/** count of all options for ntp-keygen */
#define OPTION_CT 26
/** ntp-keygen version */
-#define NTP_KEYGEN_VERSION "4.2.8p4-RC1"
+#define NTP_KEYGEN_VERSION "4.2.8p4-sec-RC2"
/** Full ntp-keygen version text */
-#define NTP_KEYGEN_FULL_VERSION "ntp-keygen (ntp) 4.2.8p4-RC1"
+#define NTP_KEYGEN_FULL_VERSION "ntp-keygen (ntp) 4.2.8p4-sec-RC2"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp-keygen 1ntp-keygenman "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH ntp-keygen 1ntp-keygenman "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-EraaUG/ag-Rra4SG)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:18:04 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:26:08 AM by AutoGen 5.18.5
.\" From the definitions ntp-keygen-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTP_KEYGEN 1ntp-keygenmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:18:12 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:26:04 AM by AutoGen 5.18.5
.\" From the definitions ntp-keygen-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<title>Ntp-keygen User's Manual</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="Ntp-keygen User's Manual">
-<meta name="generator" content="makeinfo 4.7">
+<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<meta http-equiv="Content-Style-Type" content="text/css">
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
- span.sc { font-variant:small-caps }
- span.roman { font-family: serif; font-weight: normal; }
+ span.sc { font-variant:small-caps }
+ span.roman { font-family:serif; font-weight:normal; }
+ span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
+
</div>
<h2 class="unnumbered">Top</h2>
</ul>
<div class="node">
+<a name="Top"></a>
<p><hr>
-
<a name="Top"></a>Next: <a rel="next" accesskey="n" href="#Description">Description</a>,
+Next: <a rel="next" accesskey="n" href="#Description">Description</a>,
Previous: <a rel="previous" accesskey="p" href="#dir">(dir)</a>,
Up: <a rel="up" accesskey="u" href="#dir">(dir)</a>
-<br>
+
</div>
<h2 class="unnumbered">NTP Key Generation Program User Manual</h2>
printable ASCII format so they can be embedded as MIME attachments in
mail to other sites.
- <p>This document applies to version 4.2.8p4-RC1 of <code>ntp-keygen</code>.
+ <p>This document applies to version 4.2.8p4-sec-RC2 of <code>ntp-keygen</code>.
<div class="node">
+<a name="Description"></a>
<p><hr>
-
<a name="Description"></a>Next: <a rel="next" accesskey="n" href="#Running-the-Program">Running the Program</a>,
+Next: <a rel="next" accesskey="n" href="#Running-the-Program">Running the Program</a>,
Previous: <a rel="previous" accesskey="p" href="#Top">Top</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
as described in the <a href="#Cryptographic-Data-Files">Cryptographic Data Files</a> section below.
<div class="node">
+<a name="Running-the-Program"></a>
<p><hr>
-
<a name="Running-the-Program"></a>Next: <a rel="next" accesskey="n" href="#Random-Seed-File">Random Seed File</a>,
+Next: <a rel="next" accesskey="n" href="#Random-Seed-File">Random Seed File</a>,
Previous: <a rel="previous" accesskey="p" href="#Description">Description</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
Autokey Public-Key Authentication page.
<div class="node">
-<p><hr>
+<a name="ntp-keygen-Invocation"></a>
<a name="ntp_002dkeygen-Invocation"></a>
-<br>
+<p><hr>
+
+
</div>
<h3 class="section">Invoking ntp-keygen</h3>
The symmetric keys file, normally called
<kbd>ntp.keys</kbd>,
is usually installed in
-<span class="file">/etc</span>.
+<samp><span class="file">/etc</span></samp>.
Other files and links are usually installed in
-<span class="file">/usr/local/etc</span>,
+<samp><span class="file">/usr/local/etc</span></samp>,
which is normally in a shared filesystem in
NFS-mounted networks and cannot be changed by shared clients.
The location of the keys directory can be changed by the
<kbd>keysdir</kbd>
configuration command in such cases.
Normally, this is in
-<span class="file">/etc</span>.
+<samp><span class="file">/etc</span></samp>.
<p>This program directs commentary and error messages to the standard
error stream
<kbd>ntpkey</kbd>
and include the file type, generating host and filestamp,
as described in the
-Cryptographic Data Files
+“Cryptographic Data Files”
section below.
<h5 class="subsubsection">Running the Program</h5>
<p>To test and gain experience with Autokey concepts, log in as root and
change to the keys directory, usually
-<span class="file">/usr/local/etc</span>
+<samp><span class="file">/usr/local/etc</span></samp>
When run for the first time, or if all files with names beginning with
<kbd>ntpkey</kbd>
have been removed, use the
certificate should be re-generated.
<p>Additional information on trusted groups and identity schemes is on the
-Autokey Public-Key Authentication
+“Autokey Public-Key Authentication”
page.
<p>The
and generation date and time as comments.
<p>All files are installed by default in the keys directory
-<span class="file">/usr/local/etc</span>,
+<samp><span class="file">/usr/local/etc</span></samp>,
which is normally in a shared filesystem
in NFS-mounted networks.
The actual location of the keys directory
program is logged in directly as root.
The recommended procedure is change to the keys directory,
usually
-<span class="file">/usr/local/etc</span>,
+<samp><span class="file">/usr/local/etc</span></samp>,
then run the program.
When run for the first time,
or if all
to the shared keys directory, even as root.
In this case, NFS clients can specify the files in another
directory such as
-<span class="file">/etc</span>
+<samp><span class="file">/etc</span></samp>
using the
<code>keysdir</code>
command.
while the trusted name is used for the identity files.
<p>All files are installed by default in the keys directory
-<span class="file">/usr/local/etc</span>,
+<samp><span class="file">/usr/local/etc</span></samp>,
which is normally in a shared filesystem
in NFS-mounted networks.
The actual location of the keys directory
program is logged in directly as root.
The recommended procedure is change to the keys directory,
usually
-<span class="file">/usr/local/etc</span>,
+<samp><span class="file">/usr/local/etc</span></samp>,
then run the program.
When run for the first time,
or if all
to the shared keys directory, even as root.
In this case, NFS clients can specify the files in another
directory such as
-<span class="file">/etc</span>
+<samp><span class="file">/etc</span></samp>
using the
<code>keysdir</code>
command.
<code>-P</code>
<code>-p</code> <kbd>password</kbd>
to generate the host key file
-<span class="file">ntpkey_RSAkey_</span><kbd>alice.filestamp</kbd>
+<samp><span class="file">ntpkey_RSAkey_</span></samp><kbd>alice.filestamp</kbd>
and trusted private certificate file
-<span class="file">ntpkey_RSA-MD5_cert_</span><kbd>alice.filestamp</kbd>.
+<samp><span class="file">ntpkey_RSA-MD5_cert_</span></samp><kbd>alice.filestamp</kbd>.
Copy both files to all group hosts;
they replace the files which would be generated in other schemes.
On each host bob install a soft link from the generic name
-<span class="file">ntpkey_host_</span><kbd>bob</kbd>
+<samp><span class="file">ntpkey_host_</span></samp><kbd>bob</kbd>
to the host key file and soft link
-<span class="file">ntpkey_cert_</span><kbd>bob</kbd>
+<samp><span class="file">ntpkey_cert_</span></samp><kbd>bob</kbd>
to the private certificate file.
Note the generic links are on bob, but point to files generated
by trusted host alice.
<code>-I</code>
<code>-p</code> <kbd>password</kbd>
to produce her parameter file
-<span class="file">ntpkey_IFFpar_</span><kbd>alice.filestamp</kbd>,
+<samp><span class="file">ntpkey_IFFpar_</span></samp><kbd>alice.filestamp</kbd>,
which includes both server and client keys.
Copy this file to all group hosts that operate as both servers
and clients and install a soft link from the generic
-<span class="file">ntpkey_iff_</span><kbd>alice</kbd>
+<samp><span class="file">ntpkey_iff_</span></samp><kbd>alice</kbd>
to this file.
If there are no hosts restricted to operate only as clients,
there is nothing further to do.
and pipe the output to a file or mail program.
Copy or mail this file to all restricted clients.
On these clients install a soft link from the generic
-<span class="file">ntpkey_iff_</span><kbd>alice</kbd>
+<samp><span class="file">ntpkey_iff_</span></samp><kbd>alice</kbd>
to this file.
To further protect the integrity of the keys,
each file can be encrypted with a secret password.
<code>-G</code>
<code>-p</code> <kbd>password</kbd>
to produce her parameter file
-<span class="file">ntpkey_GQpar_</span><kbd>alice.filestamp</kbd>,
+<samp><span class="file">ntpkey_GQpar_</span></samp><kbd>alice.filestamp</kbd>,
which includes both server and client keys.
Copy this file to all group hosts and install a soft link
from the generic
-<span class="file">ntpkey_gq_</span><kbd>alice</kbd>
+<samp><span class="file">ntpkey_gq_</span></samp><kbd>alice</kbd>
to this file.
In addition, on each host bob install a soft link
from generic
-<span class="file">ntpkey_gq_</span><kbd>bob</kbd>
+<samp><span class="file">ntpkey_gq_</span></samp><kbd>bob</kbd>
to this file.
As the GQ scheme updates the GQ parameters file and certificate
at the same time, keys and certificates can be regenerated as needed.
<kbd>n</kbd>
is the number of revokable keys (typically 5) to produce
the parameter file
-<span class="file">ntpkeys_MVpar_</span><kbd>trish.filestamp</kbd>
+<samp><span class="file">ntpkeys_MVpar_</span></samp><kbd>trish.filestamp</kbd>
and client key files
-<span class="file">ntpkeys_MVkeyd_</span><kbd>trish.filestamp</kbd>
+<samp><span class="file">ntpkeys_MVkeyd_</span></samp><kbd>trish.filestamp</kbd>
where
<kbd>d</kbd>
is the key number (0 <
<kbd>n</kbd>).
Copy the parameter file to alice and install a soft link
from the generic
-<span class="file">ntpkey_mv_</span><kbd>alice</kbd>
+<samp><span class="file">ntpkey_mv_</span></samp><kbd>alice</kbd>
to this file.
Copy one of the client key files to alice for later distribution
to her clients.
since they all work the same way.
Alice copies the client key file to all of her cliens.
On client bob install a soft link from generic
-<span class="file">ntpkey_mvkey_</span><kbd>bob</kbd>
+<samp><span class="file">ntpkey_mvkey_</span></samp><kbd>bob</kbd>
to the client key file.
As the MV scheme is independent of keys and certificates,
these files can be refreshed as needed.
which is a printable ASCII string 16 characters or less in length.
Each character is chosen from the 93 printable characters
in the range 0x21 through 0x7f excluding space and the
-#
+‘#’
character.
<p>Note that the keys used by the
<p>The
<code>ntp-keygen</code>
program generates a MD5 symmetric keys file
-<span class="file">ntpkey_MD5key_</span><kbd>hostname.filestamp</kbd>.
+<samp><span class="file">ntpkey_MD5key_</span></samp><kbd>hostname.filestamp</kbd>.
Since the file contains private shared keys,
it should be visible only to root and distributed by secure means
to other subnet hosts.
The NTP daemon loads the file
-<span class="file">ntp.keys</span>,
+<samp><span class="file">ntp.keys</span></samp>,
so
<code>ntp-keygen</code>
installs a soft link from this name to the generated file.
This software is released under the NTP license, <http://ntp.org/license>.
<ul class="menu">
-<li><a accesskey="1" href="#ntp_002dkeygen-usage">ntp-keygen usage</a>: ntp-keygen help/usage (<span class="option">--help</span>)
+<li><a accesskey="1" href="#ntp_002dkeygen-usage">ntp-keygen usage</a>: ntp-keygen help/usage (<samp><span class="option">--help</span></samp>)
<li><a accesskey="2" href="#ntp_002dkeygen-imbits">ntp-keygen imbits</a>: imbits option (-b)
<li><a accesskey="3" href="#ntp_002dkeygen-certificate">ntp-keygen certificate</a>: certificate option (-c)
<li><a accesskey="4" href="#ntp_002dkeygen-cipher">ntp-keygen cipher</a>: cipher option (-C)
</ul>
<div class="node">
+<a name="ntp-keygen-usage"></a>
+<a name="ntp_002dkeygen-usage"></a>
<p><hr>
-
<a name="ntp_002dkeygen-usage"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-imbits">ntp-keygen imbits</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-imbits">ntp-keygen imbits</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
-<h4 class="subsection">ntp-keygen help/usage (<span class="option">--help</span>)</h4>
+<h4 class="subsection">ntp-keygen help/usage (<samp><span class="option">--help</span></samp>)</h4>
<p><a name="index-ntp_002dkeygen-help-3"></a>
This is the automatically generated usage text for ntp-keygen.
<p>The text printed is the same whether selected with the <code>help</code> option
-(<span class="option">--help</span>) or the <code>more-help</code> option (<span class="option">--more-help</span>). <code>more-help</code> will print
+(<samp><span class="option">--help</span></samp>) or the <code>more-help</code> option (<samp><span class="option">--more-help</span></samp>). <code>more-help</code> will print
the usage text by passing it through a pager program.
<code>more-help</code> is disabled on platforms without a working
<code>fork(2)</code> function. The <code>PAGER</code> environment variable is
-used to select the program, defaulting to <span class="file">more</span>. Both will exit
+used to select the program, defaulting to <samp><span class="file">more</span></samp>. Both will exit
with a status code of 0.
-<pre class="example">ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p3
+<pre class="example">ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p4-RC1
Usage: ntp-keygen [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
Flg Arg Option-Name Description
-b Num imbits identity modulus bits
Please send bug reports to: <http://bugs.ntp.org, bugs@ntp.org>
</pre>
<div class="node">
+<a name="ntp-keygen-imbits"></a>
+<a name="ntp_002dkeygen-imbits"></a>
<p><hr>
-
<a name="ntp_002dkeygen-imbits"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-certificate">ntp-keygen certificate</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-certificate">ntp-keygen certificate</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-usage">ntp-keygen usage</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">imbits option (-b)</h4>
<p><a name="index-ntp_002dkeygen_002dimbits-4"></a>
This is the “identity modulus bits” option.
-This option takes a number argument <span class="file">imbits</span>.
+This option takes a number argument <samp><span class="file">imbits</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
<p>The number of bits in the identity modulus. The default is 256.
<div class="node">
+<a name="ntp-keygen-certificate"></a>
+<a name="ntp_002dkeygen-certificate"></a>
<p><hr>
-
<a name="ntp_002dkeygen-certificate"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-cipher">ntp-keygen cipher</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-cipher">ntp-keygen cipher</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-imbits">ntp-keygen imbits</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">certificate option (-c)</h4>
<p><a name="index-ntp_002dkeygen_002dcertificate-5"></a>
This is the “certificate scheme” option.
-This option takes a string argument <span class="file">scheme</span>.
+This option takes a string argument <samp><span class="file">scheme</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
schemes must be used with a DSA sign key. The default without
this option is RSA-MD5.
<div class="node">
+<a name="ntp-keygen-cipher"></a>
+<a name="ntp_002dkeygen-cipher"></a>
<p><hr>
-
<a name="ntp_002dkeygen-cipher"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-id_002dkey">ntp-keygen id-key</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-id_002dkey">ntp-keygen id-key</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-certificate">ntp-keygen certificate</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">cipher option (-C)</h4>
<p><a name="index-ntp_002dkeygen_002dcipher-6"></a>
This is the “privatekey cipher” option.
-This option takes a string argument <span class="file">cipher</span>.
+This option takes a string argument <samp><span class="file">cipher</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
equivalent to "<code>-C des-ede3-cbc". The openssl tool lists ciphers
available in "openssl -h" output.
</code><div class="node">
+<a name="ntp-keygen-id-key"></a>
+<a name="ntp_002dkeygen-id_002dkey"></a>
<p><hr>
-
<a name="ntp_002dkeygen-id_002dkey"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-gq_002dparams">ntp-keygen gq-params</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-gq_002dparams">ntp-keygen gq-params</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-cipher">ntp-keygen cipher</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">id-key option (-e)</h4>
<p>Write the IFF or GQ client keys to the standard output. This is
intended for automatic key distribution by mail.
<div class="node">
+<a name="ntp-keygen-gq-params"></a>
+<a name="ntp_002dkeygen-gq_002dparams"></a>
<p><hr>
-
<a name="ntp_002dkeygen-gq_002dparams"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-host_002dkey">ntp-keygen host-key</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-host_002dkey">ntp-keygen host-key</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-id_002dkey">ntp-keygen id-key</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">gq-params option (-G)</h4>
<p>Generate parameters and keys for the GQ identification scheme,
obsoleting any that may exist.
<div class="node">
+<a name="ntp-keygen-host-key"></a>
+<a name="ntp_002dkeygen-host_002dkey"></a>
<p><hr>
-
<a name="ntp_002dkeygen-host_002dkey"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-iffkey">ntp-keygen iffkey</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-iffkey">ntp-keygen iffkey</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-gq_002dparams">ntp-keygen gq-params</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">host-key option (-H)</h4>
<p>Generate new host keys, obsoleting any that may exist.
<div class="node">
+<a name="ntp-keygen-iffkey"></a>
+<a name="ntp_002dkeygen-iffkey"></a>
<p><hr>
-
<a name="ntp_002dkeygen-iffkey"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-ident">ntp-keygen ident</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-ident">ntp-keygen ident</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-host_002dkey">ntp-keygen host-key</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">iffkey option (-I)</h4>
<p>Generate parameters for the IFF identification scheme, obsoleting
any that may exist.
<div class="node">
+<a name="ntp-keygen-ident"></a>
+<a name="ntp_002dkeygen-ident"></a>
<p><hr>
-
<a name="ntp_002dkeygen-ident"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-lifetime">ntp-keygen lifetime</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-lifetime">ntp-keygen lifetime</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-iffkey">ntp-keygen iffkey</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ident option (-i)</h4>
<p><a name="index-ntp_002dkeygen_002dident-11"></a>
This is the “set autokey group name” option.
-This option takes a string argument <span class="file">group</span>.
+This option takes a string argument <samp><span class="file">group</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
<p>'crypto ident' or 'server ident' configuration in
ntpd's configuration file.
</code><div class="node">
+<a name="ntp-keygen-lifetime"></a>
+<a name="ntp_002dkeygen-lifetime"></a>
<p><hr>
-
<a name="ntp_002dkeygen-lifetime"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-md5key">ntp-keygen md5key</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-md5key">ntp-keygen md5key</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-ident">ntp-keygen ident</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">lifetime option (-l)</h4>
<p><a name="index-ntp_002dkeygen_002dlifetime-12"></a>
This is the ``set certificate lifetime'' option.
-This option takes a number argument <span class="file">lifetime</span>.
+This option takes a number argument <samp><span class="file">lifetime</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
<p>Set the certificate expiration to lifetime days from now.
<div class="node">
+<a name="ntp-keygen-md5key"></a>
+<a name="ntp_002dkeygen-md5key"></a>
<p><hr>
-
<a name="ntp_002dkeygen-md5key"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-modulus">ntp-keygen modulus</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-modulus">ntp-keygen modulus</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-lifetime">ntp-keygen lifetime</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">md5key option (-M)</h4>
This is the ``generate md5 keys'' option.
Generate MD5 keys, obsoleting any that may exist.
<div class="node">
+<a name="ntp-keygen-modulus"></a>
+<a name="ntp_002dkeygen-modulus"></a>
<p><hr>
-
<a name="ntp_002dkeygen-modulus"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-pvt_002dcert">ntp-keygen pvt-cert</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-pvt_002dcert">ntp-keygen pvt-cert</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-md5key">ntp-keygen md5key</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">modulus option (-m)</h4>
<p><a name="index-ntp_002dkeygen_002dmodulus-14"></a>
This is the ``modulus'' option.
-This option takes a number argument <span class="file">modulus</span>.
+This option takes a number argument <samp><span class="file">modulus</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
<p>The number of bits in the prime modulus. The default is 512.
<div class="node">
+<a name="ntp-keygen-pvt-cert"></a>
+<a name="ntp_002dkeygen-pvt_002dcert"></a>
<p><hr>
-
<a name="ntp_002dkeygen-pvt_002dcert"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-password">ntp-keygen password</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-password">ntp-keygen password</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-modulus">ntp-keygen modulus</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">pvt-cert option (-P)</h4>
<p>Generate a private certificate. By default, the program generates
public certificates.
<div class="node">
+<a name="ntp-keygen-password"></a>
+<a name="ntp_002dkeygen-password"></a>
<p><hr>
-
<a name="ntp_002dkeygen-password"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-export_002dpasswd">ntp-keygen export-passwd</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-export_002dpasswd">ntp-keygen export-passwd</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-pvt_002dcert">ntp-keygen pvt-cert</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">password option (-p)</h4>
<p><a name="index-ntp_002dkeygen_002dpassword-16"></a>
This is the ``local private password'' option.
-This option takes a string argument <span class="file">passwd</span>.
+This option takes a string argument <samp><span class="file">passwd</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
configuration command. The default password is the local
hostname.
<div class="node">
+<a name="ntp-keygen-export-passwd"></a>
+<a name="ntp_002dkeygen-export_002dpasswd"></a>
<p><hr>
-
<a name="ntp_002dkeygen-export_002dpasswd"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-sign_002dkey">ntp-keygen sign-key</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-sign_002dkey">ntp-keygen sign-key</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-password">ntp-keygen password</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">export-passwd option (-q)</h4>
<p><a name="index-ntp_002dkeygen_002dexport_002dpasswd-17"></a>
This is the ``export iff or gq group keys with password'' option.
-This option takes a string argument <span class="file">passwd</span>.
+This option takes a string argument <samp><span class="file">passwd</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
"crypto pw password" configuration command. See also the option
--id-key (-e) for unencrypted exports.
<div class="node">
+<a name="ntp-keygen-sign-key"></a>
+<a name="ntp_002dkeygen-sign_002dkey"></a>
<p><hr>
-
<a name="ntp_002dkeygen-sign_002dkey"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-subject_002dname">ntp-keygen subject-name</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-subject_002dname">ntp-keygen subject-name</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-export_002dpasswd">ntp-keygen export-passwd</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">sign-key option (-S)</h4>
<p><a name="index-ntp_002dkeygen_002dsign_002dkey-18"></a>
This is the ``generate sign key (rsa or dsa)'' option.
-This option takes a string argument <span class="file">sign</span>.
+This option takes a string argument <samp><span class="file">sign</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
that may exist. By default, the program uses the host key as the
sign key.
<div class="node">
+<a name="ntp-keygen-subject-name"></a>
+<a name="ntp_002dkeygen-subject_002dname"></a>
<p><hr>
-
<a name="ntp_002dkeygen-subject_002dname"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-trusted_002dcert">ntp-keygen trusted-cert</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-trusted_002dcert">ntp-keygen trusted-cert</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-sign_002dkey">ntp-keygen sign-key</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">subject-name option (-s)</h4>
<p><a name="index-ntp_002dkeygen_002dsubject_002dname-19"></a>
This is the ``set host and optionally group name'' option.
-This option takes a string argument <span class="file">host@group</span>.
+This option takes a string argument <samp><span class="file">host@group</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
if not provided, the host name are also used in the file names
of IFF, GQ, and MV client parameter files.
</code><div class="node">
+<a name="ntp-keygen-trusted-cert"></a>
+<a name="ntp_002dkeygen-trusted_002dcert"></a>
<p><hr>
-
<a name="ntp_002dkeygen-trusted_002dcert"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-mv_002dparams">ntp-keygen mv-params</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-mv_002dparams">ntp-keygen mv-params</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-subject_002dname">ntp-keygen subject-name</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">trusted-cert option (-T)</h4>
<p>Generate a trusted certificate. By default, the program generates
a non-trusted certificate.
<div class="node">
+<a name="ntp-keygen-mv-params"></a>
+<a name="ntp_002dkeygen-mv_002dparams"></a>
<p><hr>
-
<a name="ntp_002dkeygen-mv_002dparams"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-mv_002dkeys">ntp-keygen mv-keys</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-mv_002dkeys">ntp-keygen mv-keys</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-trusted_002dcert">ntp-keygen trusted-cert</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">mv-params option (-V)</h4>
<p><a name="index-ntp_002dkeygen_002dmv_002dparams-21"></a>
This is the ``generate <num> mv parameters'' option.
-This option takes a number argument <span class="file">num</span>.
+This option takes a number argument <samp><span class="file">num</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
<p>Generate parameters and keys for the Mu-Varadharajan (MV)
identification scheme.
<div class="node">
+<a name="ntp-keygen-mv-keys"></a>
+<a name="ntp_002dkeygen-mv_002dkeys"></a>
<p><hr>
-
<a name="ntp_002dkeygen-mv_002dkeys"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-config">ntp-keygen config</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-config">ntp-keygen config</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-mv_002dparams">ntp-keygen mv-params</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">mv-keys option (-v)</h4>
<p><a name="index-ntp_002dkeygen_002dmv_002dkeys-22"></a>
This is the ``update <num> mv keys'' option.
-This option takes a number argument <span class="file">num</span>.
+This option takes a number argument <samp><span class="file">num</span></samp>.
<p class="noindent">This option has some usage constraints. It:
<ul>
<li>must be compiled in by defining <code>AUTOKEY</code> during the compilation.
</ul>
- <p>This option has no <span class="samp">doc</span> documentation.
+ <p>This option has no ‘<samp><span class="samp">doc</span></samp>’ documentation.
<div class="node">
+<a name="ntp-keygen-config"></a>
+<a name="ntp_002dkeygen-config"></a>
<p><hr>
-
<a name="ntp_002dkeygen-config"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-exit-status">ntp-keygen exit status</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-exit-status">ntp-keygen exit status</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-mv_002dkeys">ntp-keygen mv-keys</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">presetting/configuring ntp-keygen</h4>
<li>$PWD
</ul>
The environment variables <code>HOME</code>, and <code>PWD</code>
-are expanded and replaced when <span class="file">ntp-keygen</span> runs.
+are expanded and replaced when <samp><span class="file">ntp-keygen</span></samp> runs.
For any of these that are plain files, they are simply processed.
-For any that are directories, then a file named <span class="file">.ntprc</span> is searched for
+For any that are directories, then a file named <samp><span class="file">.ntprc</span></samp> is searched for
within that directory and processed.
<p>Configuration files may be in a wide variety of formats.
Only the first letter of the argument is examined:
<dl>
-<dt><span class="samp">version</span><dd>Only print the version. This is the default.
-<br><dt><span class="samp">copyright</span><dd>Name the copyright usage licensing terms.
-<br><dt><span class="samp">verbose</span><dd>Print the full copyright usage licensing terms.
+<dt>‘<samp><span class="samp">version</span></samp>’<dd>Only print the version. This is the default.
+<br><dt>‘<samp><span class="samp">copyright</span></samp>’<dd>Name the copyright usage licensing terms.
+<br><dt>‘<samp><span class="samp">verbose</span></samp>’<dd>Print the full copyright usage licensing terms.
</dl>
<div class="node">
+<a name="ntp-keygen-exit-status"></a>
+<a name="ntp_002dkeygen-exit-status"></a>
<p><hr>
-
<a name="ntp_002dkeygen-exit-status"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-Usage">ntp-keygen Usage</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-Usage">ntp-keygen Usage</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-config">ntp-keygen config</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntp-keygen exit status</h4>
<p>One of the following exit values will be returned:
<dl>
-<dt><span class="samp">0 (EXIT_SUCCESS)</span><dd>Successful program execution.
-<br><dt><span class="samp">1 (EXIT_FAILURE)</span><dd>The operation failed or the command syntax was not valid.
-<br><dt><span class="samp">66 (EX_NOINPUT)</span><dd>A specified configuration file could not be loaded.
-<br><dt><span class="samp">70 (EX_SOFTWARE)</span><dd>libopts had an internal operational error. Please report
+<dt>‘<samp><span class="samp">0 (EXIT_SUCCESS)</span></samp>’<dd>Successful program execution.
+<br><dt>‘<samp><span class="samp">1 (EXIT_FAILURE)</span></samp>’<dd>The operation failed or the command syntax was not valid.
+<br><dt>‘<samp><span class="samp">66 (EX_NOINPUT)</span></samp>’<dd>A specified configuration file could not be loaded.
+<br><dt>‘<samp><span class="samp">70 (EX_SOFTWARE)</span></samp>’<dd>libopts had an internal operational error. Please report
it to autogen-users@lists.sourceforge.net. Thank you.
</dl>
<div class="node">
+<a name="ntp-keygen-Usage"></a>
+<a name="ntp_002dkeygen-Usage"></a>
<p><hr>
-
<a name="ntp_002dkeygen-Usage"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-Notes">ntp-keygen Notes</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-Notes">ntp-keygen Notes</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-exit-status">ntp-keygen exit status</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntp-keygen Usage</h4>
<div class="node">
+<a name="ntp-keygen-Notes"></a>
+<a name="ntp_002dkeygen-Notes"></a>
<p><hr>
-
<a name="ntp_002dkeygen-Notes"></a>Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-Bugs">ntp-keygen Bugs</a>,
+Next: <a rel="next" accesskey="n" href="#ntp_002dkeygen-Bugs">ntp-keygen Bugs</a>,
Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-Usage">ntp-keygen Usage</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntp-keygen Notes</h4>
<div class="node">
+<a name="ntp-keygen-Bugs"></a>
+<a name="ntp_002dkeygen-Bugs"></a>
<p><hr>
-
<a name="ntp_002dkeygen-Bugs"></a>Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-Notes">ntp-keygen Notes</a>,
+Previous: <a rel="previous" accesskey="p" href="#ntp_002dkeygen-Notes">ntp-keygen Notes</a>,
Up: <a rel="up" accesskey="u" href="#ntp_002dkeygen-Invocation">ntp-keygen Invocation</a>
-<br>
+
</div>
<h4 class="subsection">ntp-keygen Bugs</h4>
<div class="node">
+<a name="Random-Seed-File"></a>
<p><hr>
-
<a name="Random-Seed-File"></a>Next: <a rel="next" accesskey="n" href="#Cryptographic-Data-Files">Cryptographic Data Files</a>,
+Next: <a rel="next" accesskey="n" href="#Cryptographic-Data-Files">Cryptographic Data Files</a>,
Previous: <a rel="previous" accesskey="p" href="#Running-the-Program">Running the Program</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
with a message to the system log.
<div class="node">
+<a name="Cryptographic-Data-Files"></a>
<p><hr>
-
<a name="Cryptographic-Data-Files"></a>Previous: <a rel="previous" accesskey="p" href="#Random-Seed-File">Random Seed File</a>,
+Previous: <a rel="previous" accesskey="p" href="#Random-Seed-File">Random Seed File</a>,
Up: <a rel="up" accesskey="u" href="#Top">Top</a>
-<br>
+
</div>
<!-- node-name, next, previous, up -->
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp-keygen @NTP_KEYGEN_MS@ "06 Oct 2015" "ntp (4.2.8p4-RC1)" "User Commands"
+.TH ntp-keygen @NTP_KEYGEN_MS@ "17 Oct 2015" "ntp (4.2.8p4-sec-RC2)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-EraaUG/ag-Rra4SG)
+.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:18:04 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:26:08 AM by AutoGen 5.18.5
.\" From the definitions ntp-keygen-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd October 6 2015
+.Dd October 17 2015
.Dt NTP_KEYGEN @NTP_KEYGEN_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.mdoc)
.\"
-.\" It has been AutoGen-ed October 6, 2015 at 06:18:12 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed October 17, 2015 at 06:26:04 AM by AutoGen 5.18.5
.\" From the definitions ntp-keygen-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
projects / thirdparty / ntp.git / commitdiff
