arm64: dts: qcom: sm8750: Add Soundwire nodes

Add Soundwire controllers on SM8750, fully compatible with earlier
SM8650 generation.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250526-sm8750-audio-part-2-v3-1-74429c686bb1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 69cb60dfbd9773454febef948198fa23b63775f7..ed44ee4e8c3961216c66d11ae3f46e1599011ee0 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -2253,6 +2253,36 @@
                        #sound-dai-cells = <1>;
                };
 
+               swr3: soundwire@6ab0000 {
+                       compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+                       reg = <0x0 0x06ab0000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&lpass_wsa2macro>;
+                       clock-names = "iface";
+                       label = "WSA2";
+
+                       pinctrl-0 = <&wsa2_swr_active>;
+                       pinctrl-names = "default";
+
+                       qcom,din-ports = <4>;
+                       qcom,dout-ports = <9>;
+
+                       qcom,ports-sinterval =          /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
+                       qcom,ports-offset1 =            /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
+                       qcom,ports-offset2 =            /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+                       qcom,ports-hstart =             /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+                       qcom,ports-hstop =              /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+                       qcom,ports-word-length =        /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
+                       qcom,ports-block-pack-mode =    /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
+                       qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+                       qcom,ports-lane-control =       /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+                       #address-cells = <2>;
+                       #size-cells = <0>;
+                       #sound-dai-cells = <1>;
+                       status = "disabled";
+               };
+
                lpass_rxmacro: codec@6ac0000 {
                        compatible = "qcom,sm8750-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
                        reg = <0x0 0x06ac0000 0x0 0x1000>;
@@ -2270,6 +2300,36 @@
                        #sound-dai-cells = <1>;
                };
 
+               swr1: soundwire@6ad0000 {
+                       compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+                       reg = <0x0 0x06ad0000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&lpass_rxmacro>;
+                       clock-names = "iface";
+                       label = "RX";
+
+                       pinctrl-0 = <&rx_swr_active>;
+                       pinctrl-names = "default";
+
+                       qcom,din-ports = <1>;
+                       qcom,dout-ports = <11>;
+
+                       qcom,ports-sinterval =          /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0x31 0xff 0xff 0xff>;
+                       qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+                       qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+                       qcom,ports-hstart =             /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0x00 0xff 0xff 0xff>;
+                       qcom,ports-hstop =              /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0x0f 0xff 0xff 0xff>;
+                       qcom,ports-word-length =        /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0x18 0xff 0xff 0xff>;
+                       qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+                       qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+                       qcom,ports-lane-control =       /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+                       #address-cells = <2>;
+                       #size-cells = <0>;
+                       #sound-dai-cells = <1>;
+                       status = "disabled";
+               };
+
                lpass_txmacro: codec@6ae0000 {
                        compatible = "qcom,sm8750-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
                        reg = <0x0 0x06ae0000 0x0 0x1000>;
@@ -2304,6 +2364,36 @@
                        #sound-dai-cells = <1>;
                };
 
+               swr0: soundwire@6b10000 {
+                       compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+                       reg = <0x0 0x06b10000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&lpass_wsamacro>;
+                       clock-names = "iface";
+                       label = "WSA";
+
+                       pinctrl-0 = <&wsa_swr_active>;
+                       pinctrl-names = "default";
+
+                       qcom,din-ports = <4>;
+                       qcom,dout-ports = <9>;
+
+                       qcom,ports-sinterval =          /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
+                       qcom,ports-offset1 =            /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
+                       qcom,ports-offset2 =            /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+                       qcom,ports-hstart =             /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+                       qcom,ports-hstop =              /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+                       qcom,ports-word-length =        /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
+                       qcom,ports-block-pack-mode =    /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
+                       qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+                       qcom,ports-lane-control =       /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+                       #address-cells = <2>;
+                       #size-cells = <0>;
+                       #sound-dai-cells = <1>;
+                       status = "disabled";
+               };
+
                lpass_ag_noc: interconnect@7e40000 {
                        compatible = "qcom,sm8750-lpass-ag-noc";
                        reg = <0x0 0x07e40000 0x0 0xe080>;
@@ -2325,6 +2415,38 @@
                        #interconnect-cells = <2>;
                };
 
+               swr2: soundwire@7630000 {
+                       compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+                       reg = <0x0 0x07630000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "core", "wakeup";
+                       clocks = <&lpass_txmacro>;
+                       clock-names = "iface";
+                       label = "TX";
+
+                       pinctrl-0 = <&tx_swr_active>;
+                       pinctrl-names = "default";
+
+                       qcom,din-ports = <4>;
+                       qcom,dout-ports = <0>;
+
+                       qcom,ports-sinterval-low =      /bits/ 8 <0x01 0x01 0x03 0x03>;
+                       qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x01 0x01>;
+                       qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x00 0x00>;
+                       qcom,ports-hstart =             /bits/ 8 <0xff 0xff 0xff 0xff>;
+                       qcom,ports-hstop =              /bits/ 8 <0xff 0xff 0xff 0xff>;
+                       qcom,ports-word-length =        /bits/ 8 <0xff 0xff 0xff 0xff>;
+                       qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0xff 0xff 0xff>;
+                       qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff>;
+                       qcom,ports-lane-control =       /bits/ 8 <0x01 0x02 0x00 0x00>;
+
+                       #address-cells = <2>;
+                       #size-cells = <0>;
+                       #sound-dai-cells = <1>;
+                       status = "disabled";
+               };
+
                lpass_vamacro: codec@7660000 {
                        compatible = "qcom,sm8750-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
                        reg = <0x0 0x07660000 0x0 0x2000>;