define KernelPackage/spi-stm32-ospi
SUBMENU=$(SPI_MENU)
TITLE:=STMicroelectronics STM32 OCTO SPI controller
- DEPENDS:=@LINUX_6_18 \
- @TARGET_stm32
+ DEPENDS:=@TARGET_stm32
KCONFIG:=CONFIG_SPI_STM32_OSPI \
CONFIG_SPI_MEM=y
FILES:=$(LINUX_DIR)/drivers/spi/spi-stm32-ospi.ko
define KernelPackage/spi-stm32-qspi
SUBMENU=$(SPI_MENU)
TITLE:=STMicroelectronics STM32 QUAD SPI controller
- DEPENDS:=@LINUX_6_18 \
- @TARGET_stm32
+ DEPENDS:=@TARGET_stm32
KCONFIG:=CONFIG_SPI_STM32_QSPI \
CONFIG_SPI_MEM=y
FILES:=$(LINUX_DIR)/drivers/spi/spi-stm32-qspi.ko
KCONFIG:=CONFIG_VIDEO_STM32_CSI
FILES:=$(LINUX_DIR)/drivers/media/platform/st/stm32/stm32-csi.ko
AUTOLOAD:=$(call AutoProbe,stm32-csi)
- $(call AddDepends/video,@LINUX_6_18 @TARGET_stm32 +kmod-video-async +kmod-video-fwnode)
+ $(call AddDepends/video,@TARGET_stm32 +kmod-video-async +kmod-video-fwnode)
endef
$(eval $(call KernelPackage,stm32-csi))
define KernelPackage/stm32-omm
SUBMENU:=$(OTHER_MENU)
TITLE:=STM32 Octo Memory Manager
- DEPENDS:=@LINUX_6_18 \
- @TARGET_stm32 \
+ DEPENDS:=@TARGET_stm32 \
+kmod-spi-stm32-ospi
KCONFIG:=CONFIG_STM32_OMM
FILES:=$(LINUX_DIR)/drivers/memory/stm32_omm.ko
+++ /dev/null
-From 92483a156238078562d187f527de6b358cb53a08 Mon Sep 17 00:00:00 2001
-From: Valentin Caron <valentin.caron@foss.st.com>
-Date: Tue, 27 Aug 2024 16:04:48 +0200
-Subject: [PATCH] ARM: dts: stm32: rtc, add pin to provide LSCO on
- stm32mp13
-
-Declare pin for LSCO in stm32-pinctrl provider node to reserve this pin
-for RTC OUT2_RMP, in stm32mp13-pinctrl.dtsi.
-
-Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
-Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
----
- arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
-+++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
-@@ -595,6 +595,13 @@
- };
-
- /omit-if-no-ref/
-+ rtc_rsvd_pins_a: rtc-rsvd-0 {
-+ pins {
-+ pinmux = <STM32_PINMUX('I', 1, ANALOG)>; /* RTC_OUT2_RMP */
-+ };
-+ };
-+
-+ /omit-if-no-ref/
- sai1a_pins_a: sai1a-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 4, AF12)>, /* SAI1_SCK_A */
+++ /dev/null
-From d6e424f926397e682fc44a952d5b3a1e34b2cd73 Mon Sep 17 00:00:00 2001
-From: Valentin Caron <valentin.caron@foss.st.com>
-Date: Tue, 27 Aug 2024 16:04:50 +0200
-Subject: [PATCH] ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on
- stm32mp135f-dk
-
-On stm32mp135f-dk board, WLAN/BT module LPO_IN pin is wired to
-RTC OUT2_RMP pin.
-
-Provide a pinctrl configuration to enable LSCO on OUT2_RMP.
-
-Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
-Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
----
- arch/arm/boot/dts/st/stm32mp135f-dk.dts | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
-+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
-@@ -346,7 +346,14 @@
- };
-
- &rtc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rtc_rsvd_pins_a>;
- status = "okay";
-+
-+ rtc_lsco_pins_a: rtc-lsco-0 {
-+ pins = "out2_rmp";
-+ function = "lsco";
-+ };
- };
-
- &scmi_regu {
+++ /dev/null
-From 6b44fdef4c7ad112e17d7cbd64d7d522a426d6e4 Mon Sep 17 00:00:00 2001
-From: Christophe Roullier <christophe.roullier@foss.st.com>
-Date: Tue, 27 Aug 2024 16:04:52 +0200
-Subject: [PATCH] ARM: dts: stm32: add support of WLAN/BT on stm32mp135f-dk
-
-Add support of WLAN/BT Murata Type 1DX module:
-- usart2 is used for Bluetooth interface
-- sdmmc2 is used for WLAN (sdio) interface
-
-Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
-Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
-Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
----
- arch/arm/boot/dts/st/stm32mp135f-dk.dts | 45 +++++++++++++++++++++++++
- 1 file changed, 45 insertions(+)
-
---- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
-+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
-@@ -121,6 +121,19 @@
- };
- };
- };
-+
-+ v3v3_ao: v3v3-ao {
-+ compatible = "regulator-fixed";
-+ regulator-name = "v3v3_ao";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ wifi_pwrseq: wifi-pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&mcp23017 11 GPIO_ACTIVE_LOW>;
-+ };
- };
-
- &adc_1 {
-@@ -392,6 +405,30 @@
- status = "okay";
- };
-
-+/* Wifi */
-+&sdmmc2 {
-+ pinctrl-names = "default", "opendrain", "sleep";
-+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_clk_pins_a>;
-+ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_clk_pins_a>;
-+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
-+ non-removable;
-+ cap-sdio-irq;
-+ st,neg-edge;
-+ bus-width = <4>;
-+ vmmc-supply = <&v3v3_ao>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ brcmf: bcrmf@1 {
-+ reg = <1>;
-+ compatible = "brcm,bcm4329-fmac";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rtc_lsco_pins_a>;
-+ };
-+};
-+
- &spi5 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi5_pins_a>;
-@@ -498,6 +535,14 @@
- pinctrl-2 = <&usart2_idle_pins_a>;
- uart-has-rtscts;
- status = "okay";
-+
-+ bluetooth {
-+ shutdown-gpios = <&mcp23017 13 GPIO_ACTIVE_HIGH>;
-+ compatible = "brcm,bcm43438-bt";
-+ max-speed = <3000000>;
-+ vbat-supply = <&v3v3_ao>;
-+ vddio-supply = <&v3v3_ao>;
-+ };
- };
-
- &usbh_ehci {
+++ /dev/null
-From d6b0d7a941c4fc9241d9cca66db5d8ff9d81cc8b Mon Sep 17 00:00:00 2001
-From: Valentin Caron <valentin.caron@foss.st.com>
-Date: Tue, 27 Aug 2024 16:04:47 +0200
-Subject: [PATCH] ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp15
-
-Declare pin for LSCO in stm32-pinctrl provider node to reserve this pin
-for RTC OUT2_RMP, in stm32mp15-pinctrl.dtsi.
-
-Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
-Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
----
- arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
-+++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
-@@ -1697,6 +1697,13 @@
- };
-
- /omit-if-no-ref/
-+ rtc_rsvd_pins_a: rtc-rsvd-0 {
-+ pins {
-+ pinmux = <STM32_PINMUX('I', 8, ANALOG)>; /* RTC_OUT2_RMP */
-+ };
-+ };
-+
-+ /omit-if-no-ref/
- sai2a_pins_a: sai2a-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+++ /dev/null
-From c24e7ae60d3e97799998466a4220ef6ffa0e4c94 Mon Sep 17 00:00:00 2001
-From: Valentin Caron <valentin.caron@foss.st.com>
-Date: Tue, 27 Aug 2024 16:04:49 +0200
-Subject: [PATCH] ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on
- stm32mp157c-dk2
-
-On stm32mp157c-dk2 board, WLAN/BT module LPO_IN pin is wired to
-RTC OUT2_RMP pin.
-
-Provide a pinctrl configuration to enable LSCO on OUT2_RMP.
-
-Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
-Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
----
- arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
-+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
-@@ -84,6 +84,16 @@
- };
- };
-
-+&rtc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rtc_rsvd_pins_a>;
-+
-+ rtc_lsco_pins_a: rtc-lsco-0 {
-+ pins = "out2_rmp";
-+ function = "lsco";
-+ };
-+};
-+
- &usart2 {
- pinctrl-names = "default", "sleep", "idle";
- pinctrl-0 = <&usart2_pins_c>;
+++ /dev/null
-From 315fe7667c03c1f853e1a7038c28f23621a44a3d Mon Sep 17 00:00:00 2001
-From: Christophe Roullier <christophe.roullier@foss.st.com>
-Date: Tue, 27 Aug 2024 16:04:51 +0200
-Subject: [PATCH] ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2
-
-Add support of WLAN/BT Murata Type 1DX module:
-- usart2 is used for Bluetooth interface
-- sdmmc2 is used for WLAN (sdio) interface
-
-Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
-Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
-Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
----
- arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 41 +++++++++++++++++++++++-
- 1 file changed, 40 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
-+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
-@@ -24,6 +24,11 @@
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ wifi_pwrseq: wifi-pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>;
-+ };
- };
-
- &cryp1 {
-@@ -94,10 +99,44 @@
- };
- };
-
-+/* Wifi */
-+&sdmmc2 {
-+ pinctrl-names = "default", "opendrain", "sleep";
-+ pinctrl-0 = <&sdmmc2_b4_pins_a>;
-+ pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
-+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
-+ non-removable;
-+ cap-sdio-irq;
-+ st,neg-edge;
-+ bus-width = <4>;
-+ vmmc-supply = <&v3v3>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ brcmf: bcrmf@1 {
-+ reg = <1>;
-+ compatible = "brcm,bcm4329-fmac";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rtc_lsco_pins_a>;
-+ };
-+};
-+
-+/* Bluetooth */
- &usart2 {
- pinctrl-names = "default", "sleep", "idle";
- pinctrl-0 = <&usart2_pins_c>;
- pinctrl-1 = <&usart2_sleep_pins_c>;
- pinctrl-2 = <&usart2_idle_pins_c>;
-- status = "disabled";
-+ uart-has-rtscts;
-+ status = "okay";
-+
-+ bluetooth {
-+ shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
-+ compatible = "brcm,bcm43438-bt";
-+ max-speed = <3000000>;
-+ vbat-supply = <&v3v3>;
-+ vddio-supply = <&v3v3>;
-+ };
- };
+++ /dev/null
-From 7bfe3404a02923ca3858abf56b18a098b4be33b2 Mon Sep 17 00:00:00 2001
-From: Christophe Roullier <christophe.roullier@st.com>
-Date: Wed, 10 Nov 2021 17:39:40 +0100
-Subject: [PATCH] net: ethernet: stmmac: stm32: support the phy-supply
- regulator binding
-
-Configure the phy regulator if defined by the "phy-supply" DT phandle.
-
-Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
----
- .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 51 ++++++++++++++++++-
- 1 file changed, 50 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
-@@ -14,6 +14,7 @@
- #include <linux/of_net.h>
- #include <linux/phy.h>
- #include <linux/platform_device.h>
-+#include <linux/regulator/consumer.h>
- #include <linux/pm_wakeirq.h>
- #include <linux/regmap.h>
- #include <linux/slab.h>
-@@ -103,6 +104,7 @@ struct stm32_dwmac {
- u32 mode_reg; /* MAC glue-logic mode register */
- u32 mode_mask;
- struct regmap *regmap;
-+ struct regulator *regulator;
- u32 speed;
- const struct stm32_ops *ops;
- struct device *dev;
-@@ -443,6 +445,16 @@ static int stm32_dwmac_parse_data(struct
- }
- }
-
-+ dwmac->regulator = devm_regulator_get_optional(dev, "phy");
-+ if (IS_ERR(dwmac->regulator)) {
-+ if (PTR_ERR(dwmac->regulator) == -EPROBE_DEFER) {
-+ dev_dbg(dev, "phy regulator is not available yet, deferred probing\n");
-+ return -EPROBE_DEFER;
-+ }
-+ dev_dbg(dev, "no regulator found\n");
-+ dwmac->regulator = NULL;
-+ }
-+
- return err;
- }
-
-@@ -508,6 +520,28 @@ static int stm32mp1_parse_data(struct st
- return err;
- }
-
-+static int phy_power_on(struct stm32_dwmac *bsp_priv, bool enable)
-+{
-+ int ret;
-+ struct device *dev = bsp_priv->dev;
-+
-+ if (!bsp_priv->regulator)
-+ return 0;
-+
-+ if (enable) {
-+ ret = regulator_enable(bsp_priv->regulator);
-+ if (ret)
-+ dev_err(dev, "fail to enable phy-supply\n");
-+ } else {
-+ ret = regulator_disable(bsp_priv->regulator);
-+ if (ret)
-+ dev_err(dev, "fail to disable phy-supply\n");
-+ }
-+
-+ return ret;
-+}
-+
-+
- static int stm32_dwmac_probe(struct platform_device *pdev)
- {
- struct plat_stmmacenet_data *plat_dat;
-@@ -549,12 +583,18 @@ static int stm32_dwmac_probe(struct plat
- if (ret)
- return ret;
-
-- ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
-+ ret = phy_power_on(plat_dat->bsp_priv, true);
- if (ret)
- goto err_clk_disable;
-
-+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
-+ if (ret)
-+ goto err_gmac_powerdown;
-+
- return 0;
-
-+err_gmac_powerdown:
-+ phy_power_on(plat_dat->bsp_priv, false);
- err_clk_disable:
- stm32_dwmac_clk_disable(dwmac, false);
-
-@@ -575,6 +615,8 @@ static void stm32_dwmac_remove(struct pl
- dev_pm_clear_wake_irq(&pdev->dev);
- device_init_wakeup(&pdev->dev, false);
- }
-+
-+ phy_power_on(priv->plat->bsp_priv, false);
- }
-
- static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
+++ /dev/null
-From 63c84f846ec5b794a6c90a1c5813cdb0ae75daf6 Mon Sep 17 00:00:00 2001
-From: Thomas Richard <thomas.richard@bootlin.com>
-Date: Thu, 26 Sep 2024 16:48:52 +0200
-Subject: [PATCH] ARM: dts: stm32: add ethernet2 for STM32MP135F-DK board
-
-This patch is based on the stm32mp135f-dk devicetree from 6.6 ST kernel.
-
-Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
----
- arch/arm/boot/dts/st/stm32mp135f-dk.dts | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
-+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
-@@ -20,6 +20,7 @@
-
- aliases {
- ethernet0 = ðernet1;
-+ ethernet1 = ðernet2;
- serial0 = &uart4;
- serial1 = &usart1;
- serial2 = &uart8;
-@@ -208,6 +209,30 @@
- };
- };
-
-+ðernet2 {
-+ status = "okay";
-+ pinctrl-0 = <ð2_rmii_pins_a>;
-+ pinctrl-1 = <ð2_rmii_sleep_pins_a>;
-+ pinctrl-names = "default", "sleep";
-+ phy-mode = "rmii";
-+ phy-handle = <&phy0_eth2>;
-+ st,ext-phyclk;
-+ phy-supply = <&scmi_v3v3_sw>;
-+
-+ mdio1 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "snps,dwmac-mdio";
-+ phy0_eth2: ethernet-phy@0 {
-+ compatible = "ethernet-phy-id0007.c131";
-+ reset-gpios = <&mcp23017 10 GPIO_ACTIVE_LOW>;
-+ reg = <0>;
-+ };
-+ };
-+};
-+
-+
-+
- &i2c1 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_pins_a>;
+++ /dev/null
-From 6e10eb83e20e3a31bef8580bb4197240b0a28888 Mon Sep 17 00:00:00 2001
-From: Thomas Richard <thomas.richard@bootlin.com>
-Date: Thu, 17 Oct 2024 19:51:32 +0200
-Subject: [PATCH] ARM: dts: stm32: add missing eth_wake_irq interrupt for the
- ethernet on STM32MP157
-
-Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
----
- arch/arm/boot/dts/st/stm32mp151.dtsi | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/st/stm32mp151.dtsi
-+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
-@@ -1721,8 +1721,10 @@
- compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
- reg = <0x5800a000 0x2000>;
- reg-names = "stmmaceth";
-- interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-names = "macirq";
-+ interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
-+ <&exti 70 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq",
-+ "eth_wake_irq";
- clock-names = "stmmaceth",
- "mac-clk-tx",
- "mac-clk-rx",
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_FORCE_MAX_ORDER=12
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_STM32=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_754327=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_ERRATA_798181=y
-CONFIG_ARM_ERRATA_814220=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_GROUP_RELOCS=y
-# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PAN=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_PSCI_CPUIDLE=y
-CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_SCMI_CPUFREQ=y
-# CONFIG_ARM_SCMI_DEBUG_COUNTERS is not set
-CONFIG_ARM_SCMI_HAVE_MSG=y
-CONFIG_ARM_SCMI_HAVE_SHMEM=y
-CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
-CONFIG_ARM_SCMI_PERF_DOMAIN=y
-# CONFIG_ARM_SCMI_POWER_CONTROL is not set
-CONFIG_ARM_SCMI_POWER_DOMAIN=y
-CONFIG_ARM_SCMI_PROTOCOL=y
-# CONFIG_ARM_SCMI_RAW_MODE_SUPPORT is not set
-CONFIG_ARM_SCMI_TRANSPORT_OPTEE=y
-CONFIG_ARM_SCMI_TRANSPORT_SMC=y
-# CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE is not set
-CONFIG_ARM_SMCCC_SOC_ID=y
-CONFIG_ARM_SMC_WATCHDOG=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_PM=y
-CONFIG_BOUNCE=y
-CONFIG_BUFFER_HEAD=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_STM32=y
-CONFIG_CLK_ICST=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=64
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-# CONFIG_CMA_SYSFS is not set
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_SCMI=y
-CONFIG_COMMON_CLK_STM32MP=y
-CONFIG_COMMON_CLK_STM32MP135=y
-CONFIG_COMMON_CLK_STM32MP157=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTEXT_TRACKING=y
-CONFIG_CONTEXT_TRACKING_IDLE=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_ISOLATION=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MITIGATIONS=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_GF128MUL=y
-CONFIG_CRYPTO_LIB_UTILS=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEVFREQ_GOV_PASSIVE=y
-# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
-# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
-CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
-# CONFIG_DEVFREQ_GOV_USERSPACE is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_NEED_SYNC=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS_HELPERS=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_GENPD=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DWMAC_DWC_QOS_ETH=y
-CONFIG_DWMAC_GENERIC=y
-CONFIG_DWMAC_STM32=y
-CONFIG_DW_DMAC=y
-CONFIG_DW_DMAC_CORE=y
-CONFIG_EDAC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ELF_CORE=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-CONFIG_EXT4_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FUNCTION_ALIGNMENT=0
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_CACHE=y
-# CONFIG_FW_LOADER_USER_HELPER is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_DEVICES=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_SYSCON=y
-# CONFIG_GPIO_SYSFS is not set
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CORE_SYNC=y
-CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OPTEE=y
-CONFIG_HW_RANDOM_STM32=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DEMUX_PINCTRL=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_GPIO=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_MUX_PINCTRL=y
-CONFIG_I2C_SLAVE=y
-# CONFIG_I2C_SLAVE_TESTUNIT is not set
-CONFIG_I2C_SMBUS=y
-# CONFIG_I2C_STM32F4 is not set
-CONFIG_I2C_STM32F7=y
-CONFIG_INPUT=y
-# CONFIG_INPUT_STPMIC1_ONKEY is not set
-# CONFIG_IOMMUFD is not set
-# CONFIG_IOMMU_DEBUGFS is not set
-CONFIG_IOMMU_IO_PGTABLE=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-CONFIG_IOMMU_IO_PGTABLE_LPAE=y
-# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQSTACKS=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KMAP_LOCAL=y
-CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
-# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_LRU_GEN is not set
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_STM32MP13=y
-CONFIG_MACH_STM32MP157=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAGIC_SYSRQ_SERIAL=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-# CONFIG_MDIO_GPIO is not set
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_STM32_LPTIMER is not set
-# CONFIG_MFD_STM32_TIMERS is not set
-CONFIG_MFD_STPMIC1=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=16
-CONFIG_MMC_STM32_SDMMC=y
-CONFIG_MMU_LAZY_TLB_REFCOUNT=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SRCU_NMI_SAFE=y
-CONFIG_NEON=y
-CONFIG_NET_DEVMEM=y
-CONFIG_NET_EGRESS=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_INGRESS=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_XGRESS=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=2
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_OVERLAY=y
-CONFIG_OF_RESOLVE=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OPTEE=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_POOL_STATS=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PCS_XPCS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PER_VMA_LOCK=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_LEDS=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_STM32_USBPHYC is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_MCP23S08=y
-CONFIG_PINCTRL_MCP23S08_I2C=y
-# CONFIG_PINCTRL_SCMI is not set
-CONFIG_PINCTRL_STM32=y
-CONFIG_PINCTRL_STM32MP135=y
-CONFIG_PINCTRL_STM32MP157=y
-# CONFIG_PL353_SMC is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_DEVFREQ=y
-CONFIG_PM_DEVFREQ_EVENT=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_SYSCON_POWEROFF=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ARM_SCMI=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_REGULATOR_STM32_BOOSTER is not set
-CONFIG_REGULATOR_STM32_PWR=y
-# CONFIG_REGULATOR_STM32_VREFBUF is not set
-CONFIG_REGULATOR_STPMIC1=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_SCMI=y
-CONFIG_RESET_SIMPLE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_OPTEE is not set
-CONFIG_RTC_DRV_STM32=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCSI=y
-CONFIG_SCSI_COMMON=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_STM32=y
-CONFIG_SERIAL_STM32_CONSOLE=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SMSC_PHY=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SOC_BUS=y
-CONFIG_SOFTIRQ_ON_OWN_STACK=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FILE_CACHE=y
-# CONFIG_SQUASHFS_FILE_DIRECT is not set
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_ZLIB=y
-CONFIG_STM32MP_EXTI=y
-CONFIG_STM32_DMA=y
-# CONFIG_STM32_DMA3 is not set
-CONFIG_STM32_DMAMUX=y
-CONFIG_STM32_FIREWALL=y
-# CONFIG_STM32_FMC2_EBI is not set
-CONFIG_STM32_MDMA=y
-CONFIG_STM32_WATCHDOG=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STPMIC1_WATCHDOG is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TEE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_TRUSTED_FOUNDATIONS=y
-# CONFIG_UCLAMP_TASK is not set
-# CONFIG_UEVENT_HELPER is not set
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USELIB=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VMAP_STACK=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
projects / thirdparty / openwrt.git / commitdiff
