testing: Add libipsec scenarios that exchange raw ESP packets

diff --git a/testing/tests/libipsec/host2host-cert-raw/description.txt b/testing/tests/libipsec/host2host-cert-raw/description.txt
new file mode 100644 (file)
index 0000000..3c2ee91
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/description.txt
@@ -0,0 +1,11 @@
+A connection between the hosts <b>moon</b> and <b>sun</b> is set up.
+The authentication is based on <b>X.509 certificates</b> and the <b>kernel-libipsec</b>
+plugin is used for userland IPsec ESP encryption. In this scenario, UDP encapsulation
+isn't enforced by the plugin as sending of raw ESP packets is enabled.
+<b>Firewall marks</b> are used to make the direct ESP connection possible and
+still allow IKE traffic to flow freely between the two hosts.
+<p/>
+Upon the successful establishment of the IPsec tunnel, an updown script automatically
+inserts iptables-based firewall rules that let pass the traffic tunneled via the
+<b>ipsec0</b> tun interface. In order to test both host-to-host tunnel and firewall,
+<b>moon</b> pings <b>sun</b>.

diff --git a/testing/tests/libipsec/host2host-cert-raw/evaltest.dat b/testing/tests/libipsec/host2host-cert-raw/evaltest.dat
new file mode 100644 (file)
index 0000000..6bcf6e9
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/evaltest.dat
@@ -0,0 +1,5 @@
+moon::ping -c 1 PH_IP_SUN::64 bytes from PH_IP_SUN: icmp_.eq=1::YES
+moon::swanctl --list-sas --raw 2> /dev/null::host-host.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=500 local-id=moon.strongswan.org remote-host=192.168.0.2 remote-port=500 remote-id=sun.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=CURVE_25519.*child-sas.*host-host.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128.*local-ts=\[192.168.0.1/32] remote-ts=\[192.168.0.2/32]::YES
+sun::swanctl --list-sas --raw 2> /dev/null::host-host.*version=2 state=ESTABLISHED local-host=192.168.0.2 local-port=500 local-id=sun.strongswan.org remote-host=192.168.0.1 remote-port=500 remote-id=moon.strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=CURVE_25519.*child-sas.*host-host.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128.*local-ts=\[192.168.0.2/32] remote-ts=\[192.168.0.1/32]::YES
+sun::tcpdump::IP moon.strongswan.org > sun.strongswan.org: ESP::YES
+sun::tcpdump::IP sun.strongswan.org > moon.strongswan.org: ESP::YES

diff --git a/testing/tests/libipsec/host2host-cert-raw/hosts/moon/etc/strongswan.conf b/testing/tests/libipsec/host2host-cert-raw/hosts/moon/etc/strongswan.conf
new file mode 100644 (file)
index 0000000..ac1b855
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/hosts/moon/etc/strongswan.conf
@@ -0,0 +1,24 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+swanctl {
+  load = pem pkcs1 x509 revocation constraints pubkey openssl random
+}
+
+charon-systemd {
+  load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac kdf vici kernel-libipsec kernel-netlink socket-default updown
+
+  multiple_authentication = no
+
+  plugins {
+    kernel-netlink {
+      fwmark = !0x42
+    }
+    socket-default {
+      fwmark = 0x42
+    }
+    kernel-libipsec {
+      allow_peer_ts = yes
+      raw_esp = yes
+    }
+  }
+}

diff --git a/testing/tests/libipsec/host2host-cert-raw/hosts/moon/etc/swanctl/swanctl.conf b/testing/tests/libipsec/host2host-cert-raw/hosts/moon/etc/swanctl/swanctl.conf
new file mode 100755 (executable)
index 0000000..f5553c0
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/hosts/moon/etc/swanctl/swanctl.conf
@@ -0,0 +1,26 @@
+connections {
+
+   host-host {
+      local_addrs  = 192.168.0.1
+      remote_addrs = 192.168.0.2
+
+      local {
+         auth = pubkey
+         certs = moonCert.pem
+         id = moon.strongswan.org
+      }
+      remote {
+         auth = pubkey
+         id = sun.strongswan.org
+      }
+      children {
+         host-host {
+            updown = /etc/updown
+            esp_proposals = aes128-sha256-x25519
+         }
+      }
+      version = 2
+      mobike = no
+      proposals = aes128-sha256-x25519
+   }
+}

diff --git a/testing/tests/libipsec/host2host-cert-raw/hosts/moon/etc/updown b/testing/tests/libipsec/host2host-cert-raw/hosts/moon/etc/updown
new file mode 100755 (executable)
index 0000000..c56509b
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/hosts/moon/etc/updown
@@ -0,0 +1,59 @@
+#!/bin/sh
+
+TUN_NAME=ipsec0
+
+# use protocol specific options to set ports
+case "$PLUTO_MY_PROTOCOL" in
+1)     # ICMP
+       ICMP_TYPE_OPTION="--icmp-type"
+       ;;
+58)    # ICMPv6
+       ICMP_TYPE_OPTION="--icmpv6-type"
+       ;;
+*)
+       ;;
+esac
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               S_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+               D_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+       else
+               S_MY_PORT="--sport $PLUTO_MY_PORT"
+               D_MY_PORT="--dport $PLUTO_MY_PORT"
+       fi
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               # the syntax is --icmp[v6]-type type[/code], so add it to the existing option
+               S_MY_PORT="$S_MY_PORT/$PLUTO_PEER_PORT"
+               D_MY_PORT="$D_MY_PORT/$PLUTO_PEER_PORT"
+       else
+               S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+               D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+       fi
+fi
+
+case "$PLUTO_VERB" in
+up-host)
+       iptables -I OUTPUT 1 -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       iptables -I INPUT 1 -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+down-host)
+       iptables -D OUTPUT -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       iptables -D INPUT -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+esac

diff --git a/testing/tests/libipsec/host2host-cert-raw/hosts/sun/etc/strongswan.conf b/testing/tests/libipsec/host2host-cert-raw/hosts/sun/etc/strongswan.conf
new file mode 100644 (file)
index 0000000..ac1b855
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/hosts/sun/etc/strongswan.conf
@@ -0,0 +1,24 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+swanctl {
+  load = pem pkcs1 x509 revocation constraints pubkey openssl random
+}
+
+charon-systemd {
+  load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac kdf vici kernel-libipsec kernel-netlink socket-default updown
+
+  multiple_authentication = no
+
+  plugins {
+    kernel-netlink {
+      fwmark = !0x42
+    }
+    socket-default {
+      fwmark = 0x42
+    }
+    kernel-libipsec {
+      allow_peer_ts = yes
+      raw_esp = yes
+    }
+  }
+}

diff --git a/testing/tests/libipsec/host2host-cert-raw/hosts/sun/etc/swanctl/swanctl.conf b/testing/tests/libipsec/host2host-cert-raw/hosts/sun/etc/swanctl/swanctl.conf
new file mode 100755 (executable)
index 0000000..cf11e75
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/hosts/sun/etc/swanctl/swanctl.conf
@@ -0,0 +1,26 @@
+connections {
+
+   host-host {
+      local_addrs  = 192.168.0.2
+      remote_addrs = 192.168.0.1
+
+      local {
+         auth = pubkey
+         certs = sunCert.pem
+         id = sun.strongswan.org
+      }
+      remote {
+         auth = pubkey
+         id = moon.strongswan.org
+      }
+      children {
+         host-host {
+            updown = /etc/updown
+            esp_proposals = aes128-sha256-x25519
+         }
+      }
+      version = 2
+      mobike = no
+      proposals = aes128-sha256-x25519
+   }
+}

diff --git a/testing/tests/libipsec/host2host-cert-raw/hosts/sun/etc/updown b/testing/tests/libipsec/host2host-cert-raw/hosts/sun/etc/updown
new file mode 100755 (executable)
index 0000000..c56509b
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/hosts/sun/etc/updown
@@ -0,0 +1,59 @@
+#!/bin/sh
+
+TUN_NAME=ipsec0
+
+# use protocol specific options to set ports
+case "$PLUTO_MY_PROTOCOL" in
+1)     # ICMP
+       ICMP_TYPE_OPTION="--icmp-type"
+       ;;
+58)    # ICMPv6
+       ICMP_TYPE_OPTION="--icmpv6-type"
+       ;;
+*)
+       ;;
+esac
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               S_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+               D_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+       else
+               S_MY_PORT="--sport $PLUTO_MY_PORT"
+               D_MY_PORT="--dport $PLUTO_MY_PORT"
+       fi
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               # the syntax is --icmp[v6]-type type[/code], so add it to the existing option
+               S_MY_PORT="$S_MY_PORT/$PLUTO_PEER_PORT"
+               D_MY_PORT="$D_MY_PORT/$PLUTO_PEER_PORT"
+       else
+               S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+               D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+       fi
+fi
+
+case "$PLUTO_VERB" in
+up-host)
+       iptables -I OUTPUT 1 -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       iptables -I INPUT 1 -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+down-host)
+       iptables -D OUTPUT -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       iptables -D INPUT -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+esac

diff --git a/testing/tests/libipsec/host2host-cert-raw/posttest.dat b/testing/tests/libipsec/host2host-cert-raw/posttest.dat
new file mode 100644 (file)
index 0000000..557ee30
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/posttest.dat
@@ -0,0 +1,7 @@
+moon::swanctl --terminate --ike host-host 2> /dev/null
+moon::systemctl stop strongswan
+sun::systemctl stop strongswan
+moon::iptables-restore < /etc/iptables.flush
+sun::iptables-restore < /etc/iptables.flush
+moon::sysctl --pattern net.ipv4.conf.all.rp_filter --system
+sun::sysctl --pattern net.ipv4.conf.all.rp_filter --system

diff --git a/testing/tests/libipsec/host2host-cert-raw/pretest.dat b/testing/tests/libipsec/host2host-cert-raw/pretest.dat
new file mode 100644 (file)
index 0000000..624728e
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/pretest.dat
@@ -0,0 +1,9 @@
+moon::sysctl -w net.ipv4.conf.all.rp_filter=2
+sun::sysctl -w net.ipv4.conf.all.rp_filter=2
+moon::iptables-restore < /etc/iptables.rules
+sun::iptables-restore < /etc/iptables.rules
+moon::systemctl start strongswan
+sun::systemctl start strongswan
+sun::expect-connection host-host
+moon::expect-connection host-host
+moon::swanctl --initiate --child host-host 2> /dev/null

diff --git a/testing/tests/libipsec/host2host-cert-raw/test.conf b/testing/tests/libipsec/host2host-cert-raw/test.conf
new file mode 100644 (file)
index 0000000..52d886d
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert-raw/test.conf
@@ -0,0 +1,25 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# guest instances used for this test
+
+# All guest instances that are required for this test
+#
+VIRTHOSTS="moon winnetou sun"
+
+# Corresponding block diagram
+#
+DIAGRAM="m-w-s.png"
+
+# Guest instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="sun"
+
+# Guest instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon sun"
+
+# charon controlled by swanctl
+#
+SWANCTL=1

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/description.txt b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/description.txt
similarity index 100%
rename from testing/tests/libipsec/net2net-cert-ipv6/description.txt
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/description.txt

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/evaltest.dat b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/evaltest.dat
similarity index 85%
rename from testing/tests/libipsec/net2net-cert-ipv6/evaltest.dat
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/evaltest.dat
index cdb8ead3c1e8386c86f4962a025b34888975f6e1..b92e71683454b41b871370b8df5390395f537c8f 100644 (file)
--- a/testing/tests/libipsec/net2net-cert-ipv6/evaltest.dat
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/evaltest.dat
@@ -1,5 +1,5 @@
 alice::ping6 -c 3 -W 1 -i 0.2 -s 8184 -p deadbeef ip6-bob.strongswan.org::8192 bytes from ip6-bob.strongswan.org.*: icmp_seq=3::YES
-moon ::swanctl --list-sas --raw 2> /dev/null::gw-gw.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.2 remote-port=4500 remote-id=sun.strongswan.org initiator=yes.*nat-remote=yes nat-any=yes encr-alg=AES_CBC encr-keysize=256 integ-alg=HMAC_SHA2_384_192 prf-alg=PRF_HMAC_SHA2_384 dh-group=ECP_384.*child-sas.*net-net.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP encap=yes.*encr-alg=AES_GCM_16 encr-keysize=256.*local-ts=\[fec1::/16\[ipv6-icmp]] remote-ts=\[fec2::/16\[ipv6-icmp]]::YES
-sun  ::swanctl --list-sas --raw 2> /dev/null::gw-gw.*version=2 state=ESTABLISHED local-host=192.168.0.2 local-port=4500 local-id=sun.strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org.*nat-remote=yes nat-any=yes encr-alg=AES_CBC encr-keysize=256 integ-alg=HMAC_SHA2_384_192 prf-alg=PRF_HMAC_SHA2_384 dh-group=ECP_384.*child-sas.*net-net.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP encap=yes.*encr-alg=AES_GCM_16 encr-keysize=256.*local-ts=\[fec2::/16\[ipv6-icmp]] remote-ts=\[fec1::/16\[ipv6-icmp]]::YES
+moon ::swanctl --list-sas --raw 2> /dev/null::gw-gw.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.2 remote-port=4500 remote-id=sun.strongswan.org initiator=yes.*nat-remote=yes nat-any=yes encr-alg=AES_CBC encr-keysize=256 integ-alg=HMAC_SHA2_384_192 prf-alg=PRF_HMAC_SHA2_384 dh-group=ECP_384.*child-sas.*net-net.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP encap=yes.*encr-alg=AES_GCM_16 encr-keysize=256.*local-ts=\[fec1:\:/16\[ipv6-icmp]] remote-ts=\[fec2:\:/16\[ipv6-icmp]]::YES
+sun  ::swanctl --list-sas --raw 2> /dev/null::gw-gw.*version=2 state=ESTABLISHED local-host=192.168.0.2 local-port=4500 local-id=sun.strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org.*nat-remote=yes nat-any=yes encr-alg=AES_CBC encr-keysize=256 integ-alg=HMAC_SHA2_384_192 prf-alg=PRF_HMAC_SHA2_384 dh-group=ECP_384.*child-sas.*net-net.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP encap=yes.*encr-alg=AES_GCM_16 encr-keysize=256.*local-ts=\[fec2:\:/16\[ipv6-icmp]] remote-ts=\[fec1:\:/16\[ipv6-icmp]]::YES
 sun::tcpdump::IP moon.strongswan.org.\(4500\|ipsec-nat-t\) > sun.strongswan.org.\(4500\|ipsec-nat-t\): UDP-encap: ESP::YES
 sun::tcpdump::IP sun.strongswan.org.\(4500\|ipsec-nat-t\) > moon.strongswan.org.\(4500\|ipsec-nat-t\): UDP-encap: ESP::YES

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/strongswan.conf b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/moon/etc/strongswan.conf
similarity index 100%
rename from testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/strongswan.conf
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/moon/etc/strongswan.conf

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/swanctl/swanctl.conf b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/moon/etc/swanctl/swanctl.conf
similarity index 100%
rename from testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/swanctl/swanctl.conf
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/moon/etc/swanctl/swanctl.conf

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/updown b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/moon/etc/updown
similarity index 100%
rename from testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/updown
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/moon/etc/updown

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/strongswan.conf b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/sun/etc/strongswan.conf
similarity index 100%
rename from testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/strongswan.conf
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/sun/etc/strongswan.conf

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/swanctl/swanctl.conf b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/sun/etc/swanctl/swanctl.conf
similarity index 100%
rename from testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/swanctl/swanctl.conf
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/sun/etc/swanctl/swanctl.conf

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/updown b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/sun/etc/updown
similarity index 100%
rename from testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/updown
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/hosts/sun/etc/updown

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/posttest.dat b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/posttest.dat
similarity index 100%
rename from testing/tests/libipsec/net2net-cert-ipv6/posttest.dat
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/posttest.dat

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/pretest.dat b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/pretest.dat
similarity index 100%
rename from testing/tests/libipsec/net2net-cert-ipv6/pretest.dat
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/pretest.dat

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/test.conf b/testing/tests/libipsec/net2net-cert-ip6-in-ip4/test.conf
similarity index 100%
rename from testing/tests/libipsec/net2net-cert-ipv6/test.conf
rename to testing/tests/libipsec/net2net-cert-ip6-in-ip4/test.conf

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/description.txt b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/description.txt
new file mode 100644 (file)
index 0000000..1461b5e
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/description.txt
@@ -0,0 +1,11 @@
+An IPv6 ESP tunnel connection between the gateways <b>moon</b> and <b>sun</b> is set up.
+It connects the two IPv6 subnets hiding behind their respective gateways.
+The authentication is based on <b>X.509 certificates</b> and the <b>kernel-libipsec</b>
+plugin is used for userland IPsec ESP encryption. In this scenario, UDP encapsulation
+isn't enforced by the plugin as sending of raw ESP packets is enabled.
+<p/>
+Upon the successful establishment of the IPsec tunnel, an updown script automatically
+inserts iptables-based firewall rules that let pass the traffic tunneled via the
+<b>ipsec0</b> tun interface. In order to test both tunnel and firewall, client <b>alice</b>
+behind gateway <b>moon</b> sends an IPv6 ICMP request to client <b>bob</b> behind <b>sun</b>
+using the ping6 command.

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/evaltest.dat b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/evaltest.dat
new file mode 100644 (file)
index 0000000..34e90c7
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/evaltest.dat
@@ -0,0 +1,5 @@
+alice::ping6 -c 1 -p deadbeef ip6-bob.strongswan.org::64 bytes from ip6-bob.strongswan.org.*: icmp_seq=1::YES
+moon::swanctl --list-sas --raw 2> /dev/null::gw-gw.*version=2 state=ESTABLISHED local-host=fec0:\:1 local-port=500 local-id=moon.strongswan.org remote-host=fec0:\:2 remote-port=500 remote-id=sun.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=CURVE_25519.*child-sas.*net-net.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[fec1:\:/16] remote-ts=\[fec2:\:/16]::YES
+sun ::swanctl --list-sas --raw 2> /dev/null::gw-gw.*version=2 state=ESTABLISHED local-host=fec0:\:2 local-port=500 local-id=sun.strongswan.org remote-host=fec0:\:1 remote-port=500 remote-id=moon.strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=CURVE_25519.*child-sas.*net-net.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[fec2:\:/16] remote-ts=\[fec1:\:/16]::YES
+sun::tcpdump::IP6 ip6-moon.strongswan.org > ip6-sun.strongswan.org: ESP::YES
+sun::tcpdump::IP6 ip6-sun.strongswan.org > ip6-moon.strongswan.org: ESP::YES

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/moon/etc/strongswan.conf b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/moon/etc/strongswan.conf
new file mode 100644 (file)
index 0000000..e2c90b0
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/moon/etc/strongswan.conf
@@ -0,0 +1,15 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+swanctl {
+  load = pem pkcs1 x509 revocation constraints pubkey openssl random
+}
+
+charon-systemd {
+  load = random nonce aes sha1 sha2 gcm pem pkcs1 curve25519 gmp x509 curl revocation hmac kdf vici kernel-libipsec kernel-netlink socket-default updown
+  multiple_authentication = no
+  plugins {
+    kernel-libipsec {
+      raw_esp = yes
+    }
+  }
+}

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/moon/etc/swanctl/swanctl.conf b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/moon/etc/swanctl/swanctl.conf
new file mode 100755 (executable)
index 0000000..070310c
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/moon/etc/swanctl/swanctl.conf
@@ -0,0 +1,36 @@
+connections {
+
+   gw-gw {
+      local_addrs  = fec0::1
+      remote_addrs = fec0::2
+
+      local {
+         auth = pubkey
+         certs = moonCert.pem
+         id = moon.strongswan.org
+      }
+      remote {
+         auth = pubkey
+         id = sun.strongswan.org
+      }
+      children {
+         net-net {
+            local_ts  = fec1::0/16
+            remote_ts = fec2::0/16
+
+            updown = /etc/updown
+            esp_proposals = aes128gcm128-x25519
+         }
+      }
+      version = 2
+      mobike = no
+      proposals = aes128-sha256-x25519
+   }
+}
+
+authorities {
+   strongswan {
+      cacert = strongswanCert.pem
+      crl_uris = http://ip6-winnetou.strongswan.org/strongswan.crl
+   }
+}
\ No newline at end of file

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/moon/etc/updown b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/moon/etc/updown
new file mode 100755 (executable)
index 0000000..40b8fd3
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/moon/etc/updown
@@ -0,0 +1,59 @@
+#!/bin/sh
+
+TUN_NAME=ipsec0
+
+# use protocol specific options to set ports
+case "$PLUTO_MY_PROTOCOL" in
+1)     # ICMP
+       ICMP_TYPE_OPTION="--icmp-type"
+       ;;
+58)    # ICMPv6
+       ICMP_TYPE_OPTION="--icmpv6-type"
+       ;;
+*)
+       ;;
+esac
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               S_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+               D_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+       else
+               S_MY_PORT="--sport $PLUTO_MY_PORT"
+               D_MY_PORT="--dport $PLUTO_MY_PORT"
+       fi
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               # the syntax is --icmp[v6]-type type[/code], so add it to the existing option
+               S_MY_PORT="$S_MY_PORT/$PLUTO_PEER_PORT"
+               D_MY_PORT="$D_MY_PORT/$PLUTO_PEER_PORT"
+       else
+               S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+               D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+       fi
+fi
+
+case "$PLUTO_VERB" in
+up-client-v6)
+       ip6tables -I FORWARD 1 -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       ip6tables -I FORWARD 1 -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+down-client-v6)
+       ip6tables -D FORWARD -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       ip6tables -D FORWARD -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+esac

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/sun/etc/strongswan.conf b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/sun/etc/strongswan.conf
new file mode 100644 (file)
index 0000000..fa2a2a4
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/sun/etc/strongswan.conf
@@ -0,0 +1,15 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+swanctl {
+  load = pem pkcs1 x509 revocation constraints pubkey openssl random
+}
+
+charon-systemd {
+  load = random nonce aes sha1 sha2 gcm pem pkcs1 curve25519 gmp x509 curl revocation hmac kdf vici ker_nel-libipsec kernel-netlink socket-default updown
+  multiple_authentication = no
+  plugins {
+    kernel-libipsec {
+      raw_esp = yes
+    }
+  }
+}

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/sun/etc/swanctl/swanctl.conf b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/sun/etc/swanctl/swanctl.conf
new file mode 100755 (executable)
index 0000000..6d3bb72
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/sun/etc/swanctl/swanctl.conf
@@ -0,0 +1,37 @@
+connections {
+
+   gw-gw {
+      local_addrs  = fec0::2
+      remote_addrs = fec0::1
+
+      local {
+         auth = pubkey
+         certs = sunCert.pem
+         id = sun.strongswan.org
+      }
+      remote {
+         auth = pubkey
+         id = moon.strongswan.org
+      }
+      children {
+         net-net {
+            local_ts  = fec2::0/16
+            remote_ts = fec1::0/16
+
+            updown = /etc/updown
+            updown = /usr/local/libexec/ipsec/_updown iptables
+            esp_proposals = aes128gcm128-x25519
+         }
+      }
+      version = 2
+      mobike = no
+      proposals = aes128-sha256-x25519
+   }
+}
+
+authorities {
+   strongswan {
+      cacert = strongswanCert.pem
+      crl_uris = http://ip6-winnetou.strongswan.org/strongswan.crl
+   }
+}
\ No newline at end of file

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/sun/etc/updown b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/sun/etc/updown
new file mode 100755 (executable)
index 0000000..40b8fd3
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/hosts/sun/etc/updown
@@ -0,0 +1,59 @@
+#!/bin/sh
+
+TUN_NAME=ipsec0
+
+# use protocol specific options to set ports
+case "$PLUTO_MY_PROTOCOL" in
+1)     # ICMP
+       ICMP_TYPE_OPTION="--icmp-type"
+       ;;
+58)    # ICMPv6
+       ICMP_TYPE_OPTION="--icmpv6-type"
+       ;;
+*)
+       ;;
+esac
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               S_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+               D_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+       else
+               S_MY_PORT="--sport $PLUTO_MY_PORT"
+               D_MY_PORT="--dport $PLUTO_MY_PORT"
+       fi
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               # the syntax is --icmp[v6]-type type[/code], so add it to the existing option
+               S_MY_PORT="$S_MY_PORT/$PLUTO_PEER_PORT"
+               D_MY_PORT="$D_MY_PORT/$PLUTO_PEER_PORT"
+       else
+               S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+               D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+       fi
+fi
+
+case "$PLUTO_VERB" in
+up-client-v6)
+       ip6tables -I FORWARD 1 -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       ip6tables -I FORWARD 1 -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+down-client-v6)
+       ip6tables -D FORWARD -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       ip6tables -D FORWARD -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+esac

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/posttest.dat b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/posttest.dat
new file mode 100644 (file)
index 0000000..7428186
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/posttest.dat
@@ -0,0 +1,11 @@
+moon::swanctl --terminate --ike gw-gw 2> /dev/null
+moon::systemctl stop strongswan
+sun::systemctl stop strongswan
+alice::"ip route del fec2:\:/16 via fec1:\:1"
+moon::"ip route del fec2:\:/16 via fec0:\:2"
+sun::"ip route del fec1:\:/16 via fec0:\:1"
+bob::"ip route del fec1:\:/16 via fec2:\:1"
+moon::iptables-restore < /etc/iptables.flush
+sun::iptables-restore < /etc/iptables.flush
+moon::ip6tables-restore < /etc/ip6tables.flush
+sun::ip6tables-restore < /etc/ip6tables.flush

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/pretest.dat b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/pretest.dat
new file mode 100644 (file)
index 0000000..4ae22dc
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/pretest.dat
@@ -0,0 +1,13 @@
+moon::iptables-restore < /etc/iptables.drop
+sun::iptables-restore < /etc/iptables.drop
+moon::ip6tables-restore < /etc/ip6tables.rules
+sun::ip6tables-restore < /etc/ip6tables.rules
+alice::"ip route add fec2:\:/16 via fec1:\:1"
+moon::"ip route add fec2:\:/16 via fec0:\:2"
+sun::"ip route add fec1:\:/16 via fec0:\:1"
+bob::"ip route add fec1:\:/16 via fec2:\:1"
+moon::systemctl start strongswan
+sun::systemctl start strongswan
+moon::expect-connection gw-gw
+sun::expect-connection gw-gw
+moon::swanctl --initiate --child net-net 2> /dev/null

diff --git a/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/test.conf b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/test.conf
new file mode 100644 (file)
index 0000000..5906883
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ip6-in-ip6-raw/test.conf
@@ -0,0 +1,29 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# guest instances used for this test
+
+# All guest instances that are required for this test
+#
+VIRTHOSTS="alice moon winnetou sun bob"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-w-s-b-ip6.png"
+
+# Guest instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="sun"
+
+# Guest instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon sun"
+
+# IP protocol used by IPsec is IPv6
+#
+IPV6=1
+
+# charon controlled by swanctl
+#
+SWANCTL=1

diff --git a/testing/tests/libipsec/net2net-cert-raw/description.txt b/testing/tests/libipsec/net2net-cert-raw/description.txt
new file mode 100644 (file)
index 0000000..240f6e8
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/description.txt
@@ -0,0 +1,9 @@
+A connection between the subnets behind the gateways <b>moon</b> and <b>sun</b> is set up.
+The authentication is based on <b>X.509 certificates</b> and the <b>kernel-libipsec</b>
+plugin is used for userland IPsec ESP encryption. In this scenario, UDP encapsulation
+isn't enforced by the plugin as sending of raw ESP packets is enabled.
+<p/>
+Upon the successful establishment of the IPsec tunnel, an updown script automatically
+inserts iptables-based firewall rules that let pass the traffic tunneled via the
+<b>ipsec0</b> tun interface. In order to test both tunnel and firewall, client <b>alice</b>
+behind gateway <b>moon</b> pings client <b>bob</b> located behind gateway <b>sun</b>.

diff --git a/testing/tests/libipsec/net2net-cert-raw/evaltest.dat b/testing/tests/libipsec/net2net-cert-raw/evaltest.dat
new file mode 100644 (file)
index 0000000..1b4b3fb
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/evaltest.dat
@@ -0,0 +1,5 @@
+alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
+moon:: swanctl --list-sas --raw 2> /dev/null::gw-gw.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=500 local-id=moon.strongswan.org remote-host=192.168.0.2 remote-port=500 remote-id=sun.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=CURVE_25519.*child-sas.*net-net.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.1.0.0/16] remote-ts=\[10.2.0.0/16]::YES
+sun::swanctl --list-sas --raw 2> /dev/null::gw-gw.*version=2 state=ESTABLISHED local-host=192.168.0.2 local-port=500 local-id=sun.strongswan.org remote-host=192.168.0.1 remote-port=500 remote-id=moon.strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=CURVE_25519.*child-sas.*net-net.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.2.0.0/16] remote-ts=\[10.1.0.0/16]::YES
+sun::tcpdump::IP moon.strongswan.org > sun.strongswan.org: ESP::YES
+sun::tcpdump::IP sun.strongswan.org > moon.strongswan.org: ESP::YES

diff --git a/testing/tests/libipsec/net2net-cert-raw/hosts/moon/etc/strongswan.conf b/testing/tests/libipsec/net2net-cert-raw/hosts/moon/etc/strongswan.conf
new file mode 100644 (file)
index 0000000..e2c90b0
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/hosts/moon/etc/strongswan.conf
@@ -0,0 +1,15 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+swanctl {
+  load = pem pkcs1 x509 revocation constraints pubkey openssl random
+}
+
+charon-systemd {
+  load = random nonce aes sha1 sha2 gcm pem pkcs1 curve25519 gmp x509 curl revocation hmac kdf vici kernel-libipsec kernel-netlink socket-default updown
+  multiple_authentication = no
+  plugins {
+    kernel-libipsec {
+      raw_esp = yes
+    }
+  }
+}

diff --git a/testing/tests/libipsec/net2net-cert-raw/hosts/moon/etc/swanctl/swanctl.conf b/testing/tests/libipsec/net2net-cert-raw/hosts/moon/etc/swanctl/swanctl.conf
new file mode 100755 (executable)
index 0000000..b063e60
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/hosts/moon/etc/swanctl/swanctl.conf
@@ -0,0 +1,29 @@
+connections {
+
+   gw-gw {
+      local_addrs  = 192.168.0.1
+      remote_addrs = 192.168.0.2
+
+      local {
+         auth = pubkey
+         certs = moonCert.pem
+         id = moon.strongswan.org
+      }
+      remote {
+         auth = pubkey
+         id = sun.strongswan.org
+      }
+      children {
+         net-net {
+            local_ts  = 10.1.0.0/16
+            remote_ts = 10.2.0.0/16
+
+            updown = /etc/updown
+            esp_proposals = aes128gcm128-x25519
+         }
+      }
+      version = 2
+      mobike = no
+      proposals = aes128-sha256-x25519
+   }
+}

diff --git a/testing/tests/libipsec/net2net-cert-raw/hosts/moon/etc/updown b/testing/tests/libipsec/net2net-cert-raw/hosts/moon/etc/updown
new file mode 100755 (executable)
index 0000000..682ccc7
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/hosts/moon/etc/updown
@@ -0,0 +1,59 @@
+#!/bin/sh
+
+TUN_NAME=ipsec0
+
+# use protocol specific options to set ports
+case "$PLUTO_MY_PROTOCOL" in
+1)     # ICMP
+       ICMP_TYPE_OPTION="--icmp-type"
+       ;;
+58)    # ICMPv6
+       ICMP_TYPE_OPTION="--icmpv6-type"
+       ;;
+*)
+       ;;
+esac
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               S_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+               D_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+       else
+               S_MY_PORT="--sport $PLUTO_MY_PORT"
+               D_MY_PORT="--dport $PLUTO_MY_PORT"
+       fi
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               # the syntax is --icmp[v6]-type type[/code], so add it to the existing option
+               S_MY_PORT="$S_MY_PORT/$PLUTO_PEER_PORT"
+               D_MY_PORT="$D_MY_PORT/$PLUTO_PEER_PORT"
+       else
+               S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+               D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+       fi
+fi
+
+case "$PLUTO_VERB" in
+up-client)
+       iptables -I FORWARD 1 -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       iptables -I FORWARD 1 -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+down-client)
+       iptables -D FORWARD -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       iptables -D FORWARD -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+esac

diff --git a/testing/tests/libipsec/net2net-cert-raw/hosts/sun/etc/strongswan.conf b/testing/tests/libipsec/net2net-cert-raw/hosts/sun/etc/strongswan.conf
new file mode 100644 (file)
index 0000000..fa2a2a4
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/hosts/sun/etc/strongswan.conf
@@ -0,0 +1,15 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+swanctl {
+  load = pem pkcs1 x509 revocation constraints pubkey openssl random
+}
+
+charon-systemd {
+  load = random nonce aes sha1 sha2 gcm pem pkcs1 curve25519 gmp x509 curl revocation hmac kdf vici ker_nel-libipsec kernel-netlink socket-default updown
+  multiple_authentication = no
+  plugins {
+    kernel-libipsec {
+      raw_esp = yes
+    }
+  }
+}

diff --git a/testing/tests/libipsec/net2net-cert-raw/hosts/sun/etc/swanctl/swanctl.conf b/testing/tests/libipsec/net2net-cert-raw/hosts/sun/etc/swanctl/swanctl.conf
new file mode 100755 (executable)
index 0000000..3622955
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/hosts/sun/etc/swanctl/swanctl.conf
@@ -0,0 +1,30 @@
+connections {
+
+   gw-gw {
+      local_addrs  = 192.168.0.2
+      remote_addrs = 192.168.0.1
+
+      local {
+         auth = pubkey
+         certs = sunCert.pem
+         id = sun.strongswan.org
+      }
+      remote {
+         auth = pubkey
+         id = moon.strongswan.org
+      }
+      children {
+         net-net {
+            local_ts  = 10.2.0.0/16
+            remote_ts = 10.1.0.0/16
+
+            updown = /etc/updown
+            updown = /usr/local/libexec/ipsec/_updown iptables
+            esp_proposals = aes128gcm128-x25519
+         }
+      }
+      version = 2
+      mobike = no
+      proposals = aes128-sha256-x25519
+   }
+}

diff --git a/testing/tests/libipsec/net2net-cert-raw/hosts/sun/etc/updown b/testing/tests/libipsec/net2net-cert-raw/hosts/sun/etc/updown
new file mode 100755 (executable)
index 0000000..682ccc7
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/hosts/sun/etc/updown
@@ -0,0 +1,59 @@
+#!/bin/sh
+
+TUN_NAME=ipsec0
+
+# use protocol specific options to set ports
+case "$PLUTO_MY_PROTOCOL" in
+1)     # ICMP
+       ICMP_TYPE_OPTION="--icmp-type"
+       ;;
+58)    # ICMPv6
+       ICMP_TYPE_OPTION="--icmpv6-type"
+       ;;
+*)
+       ;;
+esac
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               S_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+               D_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+       else
+               S_MY_PORT="--sport $PLUTO_MY_PORT"
+               D_MY_PORT="--dport $PLUTO_MY_PORT"
+       fi
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+       if [ -n "$ICMP_TYPE_OPTION" ]
+       then
+               # the syntax is --icmp[v6]-type type[/code], so add it to the existing option
+               S_MY_PORT="$S_MY_PORT/$PLUTO_PEER_PORT"
+               D_MY_PORT="$D_MY_PORT/$PLUTO_PEER_PORT"
+       else
+               S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+               D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+       fi
+fi
+
+case "$PLUTO_VERB" in
+up-client)
+       iptables -I FORWARD 1 -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       iptables -I FORWARD 1 -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+down-client)
+       iptables -D FORWARD -o $TUN_NAME -p $PLUTO_PEER_PROTOCOL \
+           -s $PLUTO_MY_CLIENT $S_MY_PORT \
+           -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+       iptables -D FORWARD -i $TUN_NAME -p $PLUTO_MY_PROTOCOL \
+           -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+           -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+       ;;
+esac

diff --git a/testing/tests/libipsec/net2net-cert-raw/posttest.dat b/testing/tests/libipsec/net2net-cert-raw/posttest.dat
new file mode 100644 (file)
index 0000000..cc6a5bf
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/posttest.dat
@@ -0,0 +1,5 @@
+moon::swanctl --terminate --ike gw-gw 2> /dev/null
+moon::systemctl stop strongswan
+sun::systemctl stop strongswan
+moon::iptables-restore < /etc/iptables.flush
+sun::iptables-restore < /etc/iptables.flush

diff --git a/testing/tests/libipsec/net2net-cert-raw/pretest.dat b/testing/tests/libipsec/net2net-cert-raw/pretest.dat
new file mode 100644 (file)
index 0000000..2d3c8c1
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/pretest.dat
@@ -0,0 +1,7 @@
+moon::iptables-restore < /etc/iptables.rules
+sun::iptables-restore < /etc/iptables.rules
+moon::systemctl start strongswan
+sun::systemctl start strongswan
+moon::expect-connection gw-gw
+sun::expect-connection gw-gw
+moon::swanctl --initiate --child net-net 2> /dev/null

diff --git a/testing/tests/libipsec/net2net-cert-raw/test.conf b/testing/tests/libipsec/net2net-cert-raw/test.conf
new file mode 100644 (file)
index 0000000..87abc76
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-raw/test.conf
@@ -0,0 +1,25 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# guest instances used for this test
+
+# All guest instances that are required for this test
+#
+VIRTHOSTS="alice moon winnetou sun bob"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-w-s-b.png"
+
+# Guest instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="sun"
+
+# Guest instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon sun"
+
+# charon controlled by swanctl
+#
+SWANCTL=1