F: include/hw/misc/unimp.h
F: hw/misc/unimp.c
+Empty slot
+M: Artyom Tarasenko <atar4qemu@gmail.com>
+R: Philippe Mathieu-Daudé <f4bug@amsat.org>
+S: Maintained
+F: include/hw/misc/empty_slot.h
+F: hw/misc/empty_slot.c
+
Standard VGA
M: Gerd Hoffmann <kraxel@redhat.com>
S: Maintained
common-obj-$(CONFIG_SOFTMMU) += clock-vmstate.o
obj-$(CONFIG_SOFTMMU) += machine-qmp-cmds.o
-common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
common-obj-$(CONFIG_XILINX_AXI) += stream.o
common-obj-$(CONFIG_PTIMER) += ptimer.o
common-obj-$(CONFIG_FITLOADER) += loader-fit.o
clock_set(const char *clk, uint64_t old, uint64_t new) "'%s', ns=%"PRIu64"->%"PRIu64
clock_propagate(const char *clk) "'%s'"
clock_update(const char *clk, const char *src, uint64_t val, int cb) "'%s', src='%s', ns=%"PRIu64", cb=%d"
-
-# empty_slot.c
-empty_slot_read(uint64_t addr, unsigned width, uint64_t value, unsigned size, const char *name) "rd addr:0x%04"PRIx64" data:0x%0*"PRIx64" size %u [%s]"
-empty_slot_write(uint64_t addr, unsigned width, uint64_t value, unsigned size, const char *name) "wr addr:0x%04"PRIx64" data:0x%0*"PRIx64" size %u [%s]"
#include "sysemu/runstate.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
-#include "hw/empty_slot.h"
+#include "hw/misc/empty_slot.h"
#include "sysemu/kvm.h"
#include "hw/semihosting/semihost.h"
#include "hw/mips/cps.h"
common-obj-$(CONFIG_PCA9552) += pca9552.o
common-obj-$(CONFIG_UNIMP) += unimp.o
+common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
common-obj-$(CONFIG_FW_CFG_DMA) += vmcoreinfo.o
# ARM devices
#include "qemu/osdep.h"
#include "hw/sysbus.h"
-#include "qemu/module.h"
#include "hw/qdev-properties.h"
-#include "hw/empty_slot.h"
+#include "hw/misc/empty_slot.h"
#include "trace.h"
#define TYPE_EMPTY_SLOT "empty_slot"
dc->realize = empty_slot_realize;
device_class_set_props(dc, empty_slot_properties);
+ set_bit(DEVICE_CATEGORY_MISC, dc->categories);
}
static const TypeInfo empty_slot_info = {
ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = 0x%02x"
ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= 0x%02x"
+# empty_slot.c
+empty_slot_read(uint64_t addr, unsigned width, uint64_t value, unsigned size, const char *name) "rd addr:0x%04"PRIx64" data:0x%0*"PRIx64" size %u [%s]"
+empty_slot_write(uint64_t addr, unsigned width, uint64_t value, unsigned size, const char *name) "wr addr:0x%04"PRIx64" data:0x%0*"PRIx64" size %u [%s]"
+
# slavio_misc.c
slavio_misc_update_irq_raise(void) "Raise IRQ"
slavio_misc_update_irq_lower(void) "Lower IRQ"
#include "hw/nvram/chrp_nvram.h"
#include "hw/nvram/fw_cfg.h"
#include "hw/char/escc.h"
-#include "hw/empty_slot.h"
+#include "hw/misc/empty_slot.h"
#include "hw/misc/unimp.h"
#include "hw/irq.h"
#include "hw/loader.h"
+++ /dev/null
-#ifndef HW_EMPTY_SLOT_H
-#define HW_EMPTY_SLOT_H
-
-#include "exec/hwaddr.h"
-
-/* empty_slot.c */
-void empty_slot_init(hwaddr addr, uint64_t slot_size);
-
-#endif
--- /dev/null
+/*
+ * QEMU Empty Slot
+ *
+ * The empty_slot device emulates known to a bus but not connected devices.
+ *
+ * Copyright (c) 2010 Artyom Tarasenko
+ *
+ * This code is licensed under the GNU GPL v2 or (at your option) any later
+ * version.
+ */
+
+#ifndef HW_EMPTY_SLOT_H
+#define HW_EMPTY_SLOT_H
+
+#include "exec/hwaddr.h"
+
+void empty_slot_init(hwaddr addr, uint64_t slot_size);
+
+#endif