The tests/hwsim framework has obsoleted these separate configuration
files for manual mac80211_hwsim testing.
Signed-off-by: Jouni Malinen <j@w1.fi>
+++ /dev/null
-interface=wlan0
-driver=nl80211
-
-hw_mode=g
-channel=1
-ssid=mac80211 test
-
-wpa=2
-wpa_key_mgmt=WPA-PSK
-wpa_pairwise=CCMP
-wpa_passphrase=12345678
+++ /dev/null
-# WPA2-Personal (PSK) with CCMP, AP and single client
-
-modprobe mac80211_hwsim
-
-hostapd hostapd.conf
-
-wpa_supplicant -Dwext -iwlan1 -c wpa_supplicant.conf
+++ /dev/null
-ctrl_interface=/var/run/wpa_supplicant
-
-network={
- ssid="mac80211 test"
- psk="12345678"
- key_mgmt=WPA-PSK
- proto=WPA2
- pairwise=CCMP
- group=CCMP
-}
+++ /dev/null
-02:00:00:00:01:00 1
-02:00:00:00:02:00 2
+++ /dev/null
-interface=wlan0
-driver=nl80211
-
-hw_mode=g
-channel=1
-ssid=mac80211 test
-
-dynamic_vlan=2
-vlan_file=hostapd.vlan
-
-macaddr_acl=0
-accept_mac_file=hostapd.accept
+++ /dev/null
-# Plaintext connection, two clients, different VLANs
-
-modprobe mac80211_hwsim radios=3
-
-hostapd hostapd.conf
-
-ifconfig wlan1 up
-iwconfig wlan1 essid "mac80211 test"
-
-ifconfig wlan2 up
-iwconfig wlan2 essid "mac80211 test"
-
-# Expected results:
-# STA1(wlan1) is bound to vlan1
-# STA2(wlan2) is bound to vlan2