ARM: stm32: Add STM32MP13xx PMIC initialization for DDR3 DRAM type

The STM32MP13xx PMIC initialization for DDR3 DRAM type is similar
to the STM32MP15xx PMIC initialization, except the VTT rail is not
enabled. Fill in the STM32MP13xx support.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>

diff --git a/board/st/common/stpmic1.c b/board/st/common/stpmic1.c
index 45c2bb5bceacbc77989a9ddbf65ea792934d96b6..b46f89dacb973723da793652c861bd050761d803 100644 (file)
--- a/board/st/common/stpmic1.c
+++ b/board/st/common/stpmic1.c
@@ -14,8 +14,19 @@
 #include <power/pmic.h>
 #include <power/stpmic1.h>
 
+static bool is_stm32mp13xx(void)
+{
+       if (!IS_ENABLED(CONFIG_STM32MP13X))
+               return false;
+
+       return of_machine_is_compatible("st,stm32mp131") ||
+              of_machine_is_compatible("st,stm32mp133") ||
+              of_machine_is_compatible("st,stm32mp135");
+}
+
 int board_ddr_power_init(enum ddr_type ddr_type)
 {
+       bool is_mp13 = is_stm32mp13xx();
        struct udevice *dev;
        bool buck3_at_1800000v = false;
        int ret;
@@ -30,18 +41,21 @@ int board_ddr_power_init(enum ddr_type ddr_type)
        switch (ddr_type) {
        case STM32MP_DDR3:
                /* VTT = Set LDO3 to sync mode */
-               ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
-               if (ret < 0)
-                       return ret;
-
-               ret &= ~STPMIC1_LDO3_MODE;
-               ret &= ~STPMIC1_LDO12356_VOUT_MASK;
-               ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL);
-
-               ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
-                                    ret);
-               if (ret < 0)
-                       return ret;
+               if (!is_mp13) {
+                       /* Enable VTT only on STM32MP15xx */
+                       ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
+                       if (ret < 0)
+                               return ret;
+
+                       ret &= ~STPMIC1_LDO3_MODE;
+                       ret &= ~STPMIC1_LDO12356_VOUT_MASK;
+                       ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL);
+
+                       ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+                                            ret);
+                       if (ret < 0)
+                               return ret;
+               }
 
                /* VDD_DDR = Set BUCK2 to 1.35V */
                ret = pmic_clrsetbits(dev,
@@ -69,11 +83,14 @@ int board_ddr_power_init(enum ddr_type ddr_type)
                mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
 
                /* Enable VTT = LDO3 */
-               ret = pmic_clrsetbits(dev,
-                                     STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
-                                     STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
-               if (ret < 0)
-                       return ret;
+               if (!is_mp13) {
+                       /* Enable VTT only on STM32MP15xx */
+                       ret = pmic_clrsetbits(dev,
+                                             STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+                                             STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
+                       if (ret < 0)
+                               return ret;
+               }
 
                mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);