nxp: imx95_evk: Drop init_uart_clk

Rely on serial driver calling clk_enable to enable the lpuart clk, no
need to do init_uart_clk in board_early_init_f().

Also remove board_early_init_f(), because it is empty now.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/board/nxp/imx95_evk/imx95_evk.c b/board/nxp/imx95_evk/imx95_evk.c
index ca1d916deab072476ca2147086c3af161efddb33..620a69b53e5a44fc2a631bf5af4c13dbca735e7f 100644 (file)
--- a/board/nxp/imx95_evk/imx95_evk.c
+++ b/board/nxp/imx95_evk/imx95_evk.c
@@ -7,14 +7,6 @@
 #include <asm/arch/clock.h>
 #include <asm/mach-imx/sys_proto.h>
 
-int board_early_init_f(void)
-{
-       /* UART1: A55, UART2: M33, UART3: M7 */
-       init_uart_clk(0);
-
-       return 0;
-}
-
 int board_late_init(void)
 {
        if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC))

diff --git a/board/nxp/imx95_evk/spl.c b/board/nxp/imx95_evk/spl.c
index 752d7f916b6743d38d2abe1393c8cef167b3cb03..761a1a4a0f6b9f5d72bcbfcc7cd1aac43dd0dae1 100644 (file)
--- a/board/nxp/imx95_evk/spl.c
+++ b/board/nxp/imx95_evk/spl.c
@@ -67,8 +67,6 @@ void board_init_f(ulong dummy)
 
        arch_cpu_init();
 
-       board_early_init_f();
-
        preloader_console_init();
 
        debug("SOC: 0x%x\n", gd->arch.soc_rev);

diff --git a/configs/imx95_15x15_evk_defconfig b/configs/imx95_15x15_evk_defconfig
index 11d91e25c3c06e81323c31d2dc4533c43b73f54b..38a855417d0f4514340007e280ff517055d7e3a8 100644 (file)
--- a/configs/imx95_15x15_evk_defconfig
+++ b/configs/imx95_15x15_evk_defconfig
@@ -38,7 +38,6 @@ CONFIG_BOOTCOMMAND="bootflow scan -l; run bsp_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx95-15x15-evk.dtb"
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
-CONFIG_BOARD_EARLY_INIT_F=y
 # CONFIG_BOARD_INIT is not set
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_PCI_INIT_R=y

diff --git a/configs/imx95_evk.config b/configs/imx95_evk.config
index a803e61dad497c845ca0768e9bf7c242ee4dc1c1..3db583cce5978d12ae8789364076caa0cfb10497 100644 (file)
--- a/configs/imx95_evk.config
+++ b/configs/imx95_evk.config
@@ -37,7 +37,6 @@ CONFIG_BOOTCOMMAND="bootflow scan -l; run bsp_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx95-19x19-evk.dtb"
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
-CONFIG_BOARD_EARLY_INIT_F=y
 # CONFIG_BOARD_INIT is not set
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_PCI_INIT_R=y