--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+#include "mt7987a.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Hiveton H5000M";
+ compatible = "hiveton,h5000m", "mediatek,mt7987a", "mediatek,mt7987";
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_amber;
+ led-upgrade = &led_status_amber;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0x11000000 \
+ root=PARTLABEL=rootfs rootwait pci=pcie_bus_perf";
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ };
+
+ button-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ };
+ };
+
+ /*
+ * LED Indicator Layout
+ * -------------------
+ * Total of 5 LED indicators, viewed from front with antenna facing up (left to right):
+ *
+ * LED 1: 5G Module indicator
+ * LED 2: Built-in 2.5G Ethernet port indicator (configurable in system)
+ * LED 3: User-definable (configurable in system)
+ * LED 4: User-definable (configurable in system)
+ * LED 5: Power indicator
+ *
+ * Note:
+ * - LEDs 1 and 5 are hardware-controlled and cannot be modified via software
+ * - In vendor firmware, LEDs 3 and 4 are used as WiFi link activity indicators
+ * for dual-band (2.4GHz/5GHz) respectively
+ */
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_amber: led-3 {
+ function = LED_FUNCTION_WLAN_2GHZ;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_blue: led-4 {
+ function = LED_FUNCTION_WLAN_5GHZ;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&pio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_usb_5v: regulator-usb-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-5v";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+ð {
+ status = "okay";
+};
+
+&fan {
+ pwms = <&pwm 1 50000 0>;
+ status = "okay";
+};
+
+&gmac0 {
+ phy-mode = "2500base-x";
+ phy-handle = <&phy0>;
+ status = "okay";
+};
+
+&gmac1 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ status = "okay";
+};
+
+&mdio {
+ /* RTL8221B-VB-CG 2.5Gbps PHY (away from power) eth0 */
+ phy0: phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <1>;
+ reset-gpios = <&pio 42 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <100000>;
+ reset-deassert-us = <100000>;
+ interrupt-parent = <&pio>;
+ interrupts = <41 IRQ_TYPE_LEVEL_LOW>;
+ realtek,aldps-enable;
+ };
+
+ /* built-in 2.5G Ethernet PHY (near power) eth1 */
+ phy1: phy@15 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <15>;
+ pinctrl-names = "i2p5gbe-led";
+ pinctrl-0 = <&i2p5gbe_led0_pins>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc_pins_default>;
+ pinctrl-1 = <&mmc_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <48000000>;
+ cap-mmc-highspeed;
+ vmmc-supply = <®_3p3v>;
+ non-removable;
+ status = "okay";
+
+ card@0 {
+ compatible = "mmc-card";
+ reg = <0>;
+
+ block {
+ compatible = "block-device";
+
+ partitions {
+ block-partition-factory {
+ partname = "factory";
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x1e00>;
+ };
+ };
+ };
+ };
+ };
+ };
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ reset-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ mt7992@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ieee80211-freq-limit = <2400000 2500000>,
+ <5170000 5835000>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "disabled";
+};
+
+&pio {
+ pwm_fan_pins: pwm-fan-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm1_0";
+ };
+ };
+};
+
+&pwm {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_fan_pins>;
+};
+
+&ssusb {
+ status = "okay";
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_usb_5v>;
+};
+
+&tphyu3port0 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
projects / thirdparty / openwrt.git / commitdiff
