]> git.ipfire.org Git - thirdparty/kernel/stable.git/commitdiff
arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
authorAleksandrs Vinarskis <alex.vinarskis@gmail.com>
Fri, 23 May 2025 13:15:08 +0000 (15:15 +0200)
committerBjorn Andersson <andersson@kernel.org>
Wed, 18 Jun 2025 04:08:31 +0000 (23:08 -0500)
Initial support for Asus Zenbook A14. Particular moddel exists
in X1-26-100, X1P-42-100 (UX3407QA) and X1E-78-100 (UX3407RA).

Mostly similar to other X1-based laptops. Notable differences are:
* Wifi/Bluetooth combo being Qualcomm FastConnect 6900 on UX3407QA
  and Qualcomm FastConnect 7800 on UX3407RA
* USB Type-C retimers are Parade PS8833, appear to behave identical
  to Parade PS8830
* gpio90 is TZ protected

Working:
* Keyboard
* Touchpad
* NVME
* Lid switch
* Camera LED
* eDP (FHD OLED, SDC420D) with brightness control
* Bluetooth, WiFi (WCN6855)
* USB Type-A port
* USB Type-C ports in USB2/USB3/DP (both orientations)
* aDSP/cDPS firmware loading, battery info
* Sleep/suspend, nothing visibly broken on resume

Out of scope of this series:
* Audio (Speakers/microphones/headphone jack)
* Camera (OmniVision OV02C10)
* HDMI (Parade PS185HDM)
* EC

Add dtsi and create two configurations for UX3407QA, UX3407RA.
Tested on UX3407QA with X1-26-100.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20250523131605.6624-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arch/arm64/boot/dts/qcom/Makefile
arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi [new file with mode: 0644]
arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts [new file with mode: 0644]
arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts [new file with mode: 0644]

index dd6b272ae492b9e2c8994a632bfed349e5c0a031..03a3027ee3a7878baedc3a1f4dd04b248ecfa290 100644 (file)
@@ -310,6 +310,8 @@ x1e78100-lenovo-thinkpad-t14s-oled-el2-dtbs := x1e78100-lenovo-thinkpad-t14s-ole
 dtb-$(CONFIG_ARCH_QCOM)        += x1e78100-lenovo-thinkpad-t14s-oled.dtb x1e78100-lenovo-thinkpad-t14s-oled-el2.dtb
 x1e80100-asus-vivobook-s15-el2-dtbs    := x1e80100-asus-vivobook-s15.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-asus-vivobook-s15.dtb x1e80100-asus-vivobook-s15-el2.dtb
+x1e80100-asus-zenbook-a14-el2-dtbs     := x1e80100-asus-zenbook-a14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-asus-zenbook-a14.dtb x1e80100-asus-zenbook-a14-el2.dtb
 x1e80100-crd-el2-dtbs  := x1e80100-crd.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-crd.dtb x1e80100-crd-el2.dtb
 x1e80100-dell-xps13-9345-el2-dtbs      := x1e80100-dell-xps13-9345.dtb x1-el2.dtbo
@@ -326,5 +328,7 @@ x1e80100-microsoft-romulus15-el2-dtbs       := x1e80100-microsoft-romulus15.dtb x1-el2
 dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-microsoft-romulus15.dtb x1e80100-microsoft-romulus15-el2.dtb
 x1e80100-qcp-el2-dtbs  := x1e80100-qcp.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-qcp.dtb x1e80100-qcp-el2.dtb
+x1p42100-asus-zenbook-a14-el2-dtbs     := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)        += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
 x1p42100-crd-el2-dtbs  := x1p42100-crd.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)        += x1p42100-crd.dtb x1p42100-crd-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
new file mode 100644 (file)
index 0000000..65c41d9
--- /dev/null
@@ -0,0 +1,1306 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100-pmics.dtsi"
+
+/ {
+       model = "ASUS Zenbook A14";
+       chassis-type = "laptop";
+
+       aliases {
+               serial0 = &uart21;
+               serial1 = &uart14;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               pinctrl-0 = <&hall_int_n_default>;
+               pinctrl-names = "default";
+
+               switch-lid {
+                       label = "lid";
+                       gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+                       linux,input-type = <EV_SW>;
+                       linux,code = <SW_LID>;
+                       wakeup-source;
+                       wakeup-event-action = <EV_ACT_DEASSERTED>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               pinctrl-0 = <&cam_indicator_en>;
+               pinctrl-names = "default";
+
+               led-camera-indicator {
+                       label = "white:camera-indicator";
+                       function = LED_FUNCTION_INDICATOR;
+                       color = <LED_COLOR_ID_WHITE>;
+                       gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "none";
+                       default-state = "off";
+                       /* Reuse as a panic indicator until we get a "camera on" trigger */
+                       panic-indicator;
+               };
+       };
+
+       pmic-glink {
+               compatible = "qcom,x1e80100-pmic-glink",
+                            "qcom,sm8550-pmic-glink",
+                            "qcom,pmic-glink";
+               orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+                                   <&tlmm 123 GPIO_ACTIVE_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               /* Left-side display-adjacent port */
+               connector@0 {
+                       compatible = "usb-c-connector";
+                       reg = <0>;
+                       power-role = "dual";
+                       data-role = "dual";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+
+                                       pmic_glink_ss0_hs_in: endpoint {
+                                               remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+                                       };
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+
+                                       pmic_glink_ss0_ss_in: endpoint {
+                                               remote-endpoint = <&retimer_ss0_ss_out>;
+                                       };
+                               };
+
+                               port@2 {
+                                       reg = <2>;
+
+                                       pmic_glink_ss0_con_sbu_in: endpoint {
+                                               remote-endpoint = <&retimer_ss0_con_sbu_out>;
+                                       };
+                               };
+                       };
+               };
+
+               /* Left-side user-adjacent port */
+               connector@1 {
+                       compatible = "usb-c-connector";
+                       reg = <1>;
+                       power-role = "dual";
+                       data-role = "dual";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+
+                                       pmic_glink_ss1_hs_in: endpoint {
+                                               remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+                                       };
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+
+                                       pmic_glink_ss1_ss_in: endpoint {
+                                               remote-endpoint = <&retimer_ss1_ss_out>;
+                                       };
+                               };
+
+                               port@2 {
+                                       reg = <2>;
+
+                                       pmic_glink_ss1_con_sbu_in: endpoint {
+                                               remote-endpoint = <&retimer_ss1_con_sbu_out>;
+                                       };
+                               };
+                       };
+               };
+       };
+
+       reserved-memory {
+               linux,cma {
+                       compatible = "shared-dma-pool";
+                       size = <0x0 0x8000000>;
+                       reusable;
+                       linux,cma-default;
+               };
+       };
+
+       vreg_edp_3p3: regulator-edp-3p3 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_EDP_3P3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&edp_reg_en>;
+               pinctrl-names = "default";
+
+               regulator-boot-on;
+       };
+
+       vreg_misc_3p3: regulator-misc-3p3 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_MISC_3P3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&misc_3p3_reg_en>;
+               pinctrl-names = "default";
+
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       vreg_nvme: regulator-nvme {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_NVME_3P3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&nvme_reg_en>;
+               pinctrl-names = "default";
+
+               regulator-boot-on;
+       };
+
+       vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_RTMR0_1P15";
+               regulator-min-microvolt = <1150000>;
+               regulator-max-microvolt = <1150000>;
+
+               gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+               pinctrl-names = "default";
+
+               regulator-boot-on;
+       };
+
+       vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_RTMR0_1P8";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+
+               gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&usb0_1p8_reg_en>;
+               pinctrl-names = "default";
+
+               regulator-boot-on;
+       };
+
+       vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_RTMR0_3P3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&usb0_3p3_reg_en>;
+               pinctrl-names = "default";
+
+               regulator-boot-on;
+       };
+
+       vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_RTMR1_1P15";
+               regulator-min-microvolt = <1150000>;
+               regulator-max-microvolt = <1150000>;
+
+               gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+               pinctrl-names = "default";
+
+               regulator-boot-on;
+       };
+
+       vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_RTMR1_1P8";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+
+               gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+               pinctrl-names = "default";
+
+               regulator-boot-on;
+       };
+
+       vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_RTMR1_3P3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+               pinctrl-names = "default";
+
+               regulator-boot-on;
+       };
+
+       vreg_vph_pwr: regulator-vph-pwr {
+               compatible = "regulator-fixed";
+
+               regulator-name = "vph_pwr";
+               regulator-min-microvolt = <3700000>;
+               regulator-max-microvolt = <3700000>;
+
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
+       vreg_wcn_0p95: regulator-wcn-0p95 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_WCN_0P95";
+               regulator-min-microvolt = <950000>;
+               regulator-max-microvolt = <950000>;
+
+               vin-supply = <&vreg_wcn_3p3>;
+       };
+
+       vreg_wcn_1p9: regulator-wcn-1p9 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_WCN_1P9";
+               regulator-min-microvolt = <1900000>;
+               regulator-max-microvolt = <1900000>;
+
+               vin-supply = <&vreg_wcn_3p3>;
+       };
+
+       vreg_wcn_3p3: regulator-wcn-3p3 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_WCN_3P3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&wcn_sw_en>;
+               pinctrl-names = "default";
+
+               regulator-boot-on;
+       };
+};
+
+&apps_rsc {
+       regulators-0 {
+               compatible = "qcom,pm8550-rpmh-regulators";
+               qcom,pmic-id = "b";
+
+               vdd-bob1-supply = <&vreg_vph_pwr>;
+               vdd-bob2-supply = <&vreg_vph_pwr>;
+               vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+               vdd-l2-l13-l14-supply = <&vreg_bob1>;
+               vdd-l5-l16-supply = <&vreg_bob1>;
+               vdd-l6-l7-supply = <&vreg_bob2>;
+               vdd-l8-l9-supply = <&vreg_bob1>;
+               vdd-l12-supply = <&vreg_s5j_1p2>;
+               vdd-l15-supply = <&vreg_s4c_1p8>;
+               vdd-l17-supply = <&vreg_bob2>;
+
+               vreg_bob1: bob1 {
+                       regulator-name = "vreg_bob1";
+                       regulator-min-microvolt = <3008000>;
+                       regulator-max-microvolt = <3960000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_bob2: bob2 {
+                       regulator-name = "vreg_bob2";
+                       regulator-min-microvolt = <2504000>;
+                       regulator-max-microvolt = <3008000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l2b_3p0: ldo2 {
+                       regulator-name = "vreg_l2b_3p0";
+                       regulator-min-microvolt = <3072000>;
+                       regulator-max-microvolt = <3072000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l4b_1p8: ldo4 {
+                       regulator-name = "vreg_l4b_1p8";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l6b_1p8: ldo6 {
+                       regulator-name = "vreg_l6b_1p8";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2960000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l8b_3p0: ldo8 {
+                       regulator-name = "vreg_l8b_3p0";
+                       regulator-min-microvolt = <3072000>;
+                       regulator-max-microvolt = <3072000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l9b_2p9: ldo9 {
+                       regulator-name = "vreg_l9b_2p9";
+                       regulator-min-microvolt = <2960000>;
+                       regulator-max-microvolt = <2960000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l10b_1p8: ldo10 {
+                       regulator-name = "vreg_l10b_1p8";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l12b_1p2: ldo12 {
+                       regulator-name = "vreg_l12b_1p2";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-always-on;
+               };
+
+               vreg_l13b_3p0: ldo13 {
+                       regulator-name = "vreg_l13b_3p0";
+                       regulator-min-microvolt = <3072000>;
+                       regulator-max-microvolt = <3072000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l14b_3p0: ldo14 {
+                       regulator-name = "vreg_l14b_3p0";
+                       regulator-min-microvolt = <3072000>;
+                       regulator-max-microvolt = <3072000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l15b_1p8: ldo15 {
+                       regulator-name = "vreg_l15b_1p8";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-always-on;
+               };
+
+               vreg_l17b_2p5: ldo17 {
+                       regulator-name = "vreg_l17b_2p5";
+                       regulator-min-microvolt = <2504000>;
+                       regulator-max-microvolt = <2504000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+
+       regulators-1 {
+               compatible = "qcom,pm8550ve-rpmh-regulators";
+               qcom,pmic-id = "c";
+
+               vdd-l1-supply = <&vreg_s5j_1p2>;
+               vdd-l2-supply = <&vreg_s1f_0p7>;
+               vdd-l3-supply = <&vreg_s1f_0p7>;
+               vdd-s4-supply = <&vreg_vph_pwr>;
+
+               vreg_s4c_1p8: smps4 {
+                       regulator-name = "vreg_s4c_1p8";
+                       regulator-min-microvolt = <1856000>;
+                       regulator-max-microvolt = <2000000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l1c_1p2: ldo1 {
+                       regulator-name = "vreg_l1c_1p2";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l2c_0p8: ldo2 {
+                       regulator-name = "vreg_l2c_0p8";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <880000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l3c_0p9: ldo3 {
+                       regulator-name = "vreg_l3c_0p9";
+                       regulator-min-microvolt = <912000>;
+                       regulator-max-microvolt = <912000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+
+       regulators-2 {
+               compatible = "qcom,pmc8380-rpmh-regulators";
+               qcom,pmic-id = "d";
+
+               vdd-l1-supply = <&vreg_s1f_0p7>;
+               vdd-l2-supply = <&vreg_s1f_0p7>;
+               vdd-l3-supply = <&vreg_s4c_1p8>;
+               vdd-s1-supply = <&vreg_vph_pwr>;
+
+               vreg_l1d_0p8: ldo1 {
+                       regulator-name = "vreg_l1d_0p8";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <880000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l2d_0p9: ldo2 {
+                       regulator-name = "vreg_l2d_0p9";
+                       regulator-min-microvolt = <912000>;
+                       regulator-max-microvolt = <912000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l3d_1p8: ldo3 {
+                       regulator-name = "vreg_l3d_1p8";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+
+       regulators-3 {
+               compatible = "qcom,pmc8380-rpmh-regulators";
+               qcom,pmic-id = "e";
+
+               vdd-l2-supply = <&vreg_s1f_0p7>;
+               vdd-l3-supply = <&vreg_s5j_1p2>;
+
+               vreg_l2e_0p8: ldo2 {
+                       regulator-name = "vreg_l2e_0p8";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <880000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l3e_1p2: ldo3 {
+                       regulator-name = "vreg_l3e_1p2";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+
+       regulators-4 {
+               compatible = "qcom,pmc8380-rpmh-regulators";
+               qcom,pmic-id = "f";
+
+               vdd-l1-supply = <&vreg_s5j_1p2>;
+               vdd-l2-supply = <&vreg_s5j_1p2>;
+               vdd-l3-supply = <&vreg_s5j_1p2>;
+               vdd-s1-supply = <&vreg_vph_pwr>;
+
+               vreg_s1f_0p7: smps1 {
+                       regulator-name = "vreg_s1f_0p7";
+                       regulator-min-microvolt = <700000>;
+                       regulator-max-microvolt = <1100000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+
+       regulators-6 {
+               compatible = "qcom,pm8550ve-rpmh-regulators";
+               qcom,pmic-id = "i";
+
+               vdd-l1-supply = <&vreg_s4c_1p8>;
+               vdd-l2-supply = <&vreg_s5j_1p2>;
+               vdd-l3-supply = <&vreg_s1f_0p7>;
+               vdd-s1-supply = <&vreg_vph_pwr>;
+               vdd-s2-supply = <&vreg_vph_pwr>;
+
+               vreg_s1i_0p9: smps1 {
+                       regulator-name = "vreg_s1i_0p9";
+                       regulator-min-microvolt = <900000>;
+                       regulator-max-microvolt = <920000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_s2i_1p0: smps2 {
+                       regulator-name = "vreg_s2i_1p0";
+                       regulator-min-microvolt = <1000000>;
+                       regulator-max-microvolt = <1100000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l1i_1p8: ldo1 {
+                       regulator-name = "vreg_l1i_1p8";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l2i_1p2: ldo2 {
+                       regulator-name = "vreg_l2i_1p2";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l3i_0p8: ldo3 {
+                       regulator-name = "vreg_l3i_0p8";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <880000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+
+       regulators-7 {
+               compatible = "qcom,pm8550ve-rpmh-regulators";
+               qcom,pmic-id = "j";
+
+               vdd-l1-supply = <&vreg_s1f_0p7>;
+               vdd-l2-supply = <&vreg_s5j_1p2>;
+               vdd-l3-supply = <&vreg_s1f_0p7>;
+               vdd-s5-supply = <&vreg_vph_pwr>;
+
+               vreg_s5j_1p2: smps5 {
+                       regulator-name = "vreg_s5j_1p2";
+                       regulator-min-microvolt = <1256000>;
+                       regulator-max-microvolt = <1304000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l1j_0p9: ldo1 {
+                       regulator-name = "vreg_l1j_0p9";
+                       regulator-min-microvolt = <912000>;
+                       regulator-max-microvolt = <912000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l2j_1p2: ldo2 {
+                       regulator-name = "vreg_l2j_1p2";
+                       regulator-min-microvolt = <1256000>;
+                       regulator-max-microvolt = <1256000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l3j_0p8: ldo3 {
+                       regulator-name = "vreg_l3j_0p8";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <880000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+};
+
+&gpu {
+       status = "okay";
+};
+
+&i2c0 {
+       clock-frequency = <400000>;
+
+       status = "okay";
+
+       /* ELAN, 04F3:3315 */
+       touchpad@15 {
+               compatible = "hid-over-i2c";
+               reg = <0x15>;
+
+               hid-descr-addr = <0x1>;
+               interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+               pinctrl-0 = <&tpad_default>;
+               pinctrl-names = "default";
+
+               wakeup-source;
+       };
+};
+
+&i2c3 {
+       clock-frequency = <400000>;
+
+       status = "okay";
+
+       /* Left-side display-adjacent port */
+       typec-mux@8 {
+               compatible = "parade,ps8833", "parade,ps8830";
+               reg = <0x08>;
+
+               clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+               vdd-supply = <&vreg_rtmr0_1p15>;
+               vdd33-supply = <&vreg_rtmr0_3p3>;
+               vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+               vddar-supply = <&vreg_rtmr0_1p15>;
+               vddat-supply = <&vreg_rtmr0_1p15>;
+               vddio-supply = <&vreg_rtmr0_1p8>;
+
+               reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+               pinctrl-0 = <&rtmr0_default>;
+               pinctrl-names = "default";
+
+               retimer-switch;
+               orientation-switch;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               retimer_ss0_ss_out: endpoint {
+                                       remote-endpoint = <&pmic_glink_ss0_ss_in>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               retimer_ss0_ss_in: endpoint {
+                                       remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+                               };
+                       };
+
+                       port@2 {
+                               reg = <2>;
+
+                               retimer_ss0_con_sbu_out: endpoint {
+                                       remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+                               };
+                       };
+               };
+       };
+};
+
+&i2c4 {
+       clock-frequency = <400000>;
+
+       status = "okay";
+
+       /* ASUSTeK, 0B05:4543 */
+       hdtl@17 {
+               compatible = "hid-over-i2c";
+               reg = <0x17>;
+
+               hid-descr-addr = <0x1>;
+               interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>;
+
+               pinctrl-0 = <&hdtl_default>;
+               pinctrl-names = "default";
+
+               wakeup-source;
+       };
+};
+
+&i2c5 {
+       clock-frequency = <400000>;
+
+       status = "okay";
+
+       eusb6_repeater: redriver@4f {
+               compatible = "nxp,ptn3222";
+               reg = <0x4f>;
+               #phy-cells = <0>;
+
+               vdd3v3-supply = <&vreg_l13b_3p0>;
+               vdd1v8-supply = <&vreg_l4b_1p8>;
+
+               reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+               pinctrl-0 = <&eusb6_reset_n>;
+               pinctrl-names = "default";
+       };
+
+       /* EC @0x5b */
+};
+
+&i2c7 {
+       clock-frequency = <400000>;
+
+       status = "okay";
+
+       /* Left-side user-adjacent port */
+       typec-mux@8 {
+               compatible = "parade,ps8833", "parade,ps8830";
+               reg = <0x08>;
+
+               clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+               vdd-supply = <&vreg_rtmr1_1p15>;
+               vdd33-supply = <&vreg_rtmr1_3p3>;
+               vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+               vddar-supply = <&vreg_rtmr1_1p15>;
+               vddat-supply = <&vreg_rtmr1_1p15>;
+               vddio-supply = <&vreg_rtmr1_1p8>;
+
+               reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+               pinctrl-0 = <&rtmr1_default>;
+               pinctrl-names = "default";
+
+               retimer-switch;
+               orientation-switch;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               retimer_ss1_ss_out: endpoint {
+                                       remote-endpoint = <&pmic_glink_ss1_ss_in>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               retimer_ss1_ss_in: endpoint {
+                                       remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+                               };
+                       };
+
+                       port@2 {
+                               reg = <2>;
+
+                               retimer_ss1_con_sbu_out: endpoint {
+                                       remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+                               };
+                       };
+               };
+       };
+};
+
+&i2c8 {
+       clock-frequency = <400000>;
+
+       status = "okay";
+
+       /* ASUSTeK, 0B05:0220 */
+       keyboard@15 {
+               compatible = "hid-over-i2c";
+               reg = <0x15>;
+
+               hid-descr-addr = <0x1>;
+               interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+               pinctrl-0 = <&kybd_default>;
+               pinctrl-names = "default";
+
+               wakeup-source;
+       };
+};
+
+&mdss {
+       status = "okay";
+};
+
+&mdss_dp0 {
+       status = "okay";
+};
+
+&mdss_dp0_out {
+       data-lanes = <0 1>;
+       link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+       status = "okay";
+};
+
+&mdss_dp1_out {
+       data-lanes = <0 1>;
+       link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+       /delete-property/ #sound-dai-cells;
+
+       status = "okay";
+
+       aux-bus {
+               panel {
+                       compatible = "edp-panel";
+                       enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+                       power-supply = <&vreg_edp_3p3>;
+
+                       pinctrl-0 = <&edp_bl_en>;
+                       pinctrl-names = "default";
+
+                       port {
+                               edp_panel_in: endpoint {
+                                       remote-endpoint = <&mdss_dp3_out>;
+                               };
+                       };
+               };
+       };
+
+       ports {
+               port@1 {
+                       reg = <1>;
+
+                       mdss_dp3_out: endpoint {
+                               data-lanes = <0 1 2 3>;
+                               link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+                               remote-endpoint = <&edp_panel_in>;
+                       };
+               };
+       };
+};
+
+&mdss_dp3_phy {
+       vdda-phy-supply = <&vreg_l3j_0p8>;
+       vdda-pll-supply = <&vreg_l2j_1p2>;
+
+       status = "okay";
+};
+
+&pcie4 {
+       perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+       wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+       pinctrl-0 = <&pcie4_default>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&pcie4_phy {
+       vdda-phy-supply = <&vreg_l3i_0p8>;
+       vdda-pll-supply = <&vreg_l3e_1p2>;
+
+       status = "okay";
+};
+
+&pcie6a {
+       perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+       wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+       vddpe-3v3-supply = <&vreg_nvme>;
+
+       pinctrl-0 = <&pcie6a_default>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&pcie6a_phy {
+       vdda-phy-supply = <&vreg_l1d_0p8>;
+       vdda-pll-supply = <&vreg_l2j_1p2>;
+
+       status = "okay";
+};
+
+&pm8550_gpios {
+       rtmr0_default: rtmr0-reset-n-active-state {
+               pins = "gpio10";
+               function = "normal";
+               power-source = <1>;
+               bias-disable;
+               input-disable;
+               output-enable;
+       };
+
+       usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+               pins = "gpio11";
+               function = "normal";
+               power-source = <1>;
+               bias-disable;
+               input-disable;
+               output-enable;
+       };
+};
+
+&pm8550ve_8_gpios {
+       misc_3p3_reg_en: misc-3p3-reg-en-state {
+               pins = "gpio6";
+               function = "normal";
+               power-source = <1>;
+               bias-disable;
+               input-disable;
+               output-enable;
+               drive-push-pull;
+               qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+       };
+};
+
+&pm8550ve_9_gpios {
+       usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+               pins = "gpio8";
+               function = "normal";
+               power-source = <1>;
+               bias-disable;
+               input-disable;
+               output-enable;
+       };
+};
+
+&pmc8380_3_gpios {
+       edp_bl_en: edp-bl-en-state {
+               pins = "gpio4";
+               function = "normal";
+               power-source = <1>;
+               input-disable;
+               output-enable;
+       };
+};
+
+&pmc8380_5_gpios {
+       usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+               pins = "gpio8";
+               function = "normal";
+               power-source = <1>;
+               bias-disable;
+               input-disable;
+               output-enable;
+       };
+};
+
+&qupv3_0 {
+       status = "okay";
+};
+
+&qupv3_1 {
+       status = "okay";
+};
+
+&qupv3_2 {
+       status = "okay";
+};
+
+&smb2360_0 {
+       status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+       vdd18-supply = <&vreg_l3d_1p8>;
+       vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+       status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+       vdd18-supply = <&vreg_l3d_1p8>;
+       vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&spi10 {
+       status = "disabled";
+
+       /* Unknown device */
+};
+
+&tlmm {
+       gpio-reserved-ranges = <44 4>,  /* SPI11, TZ Protected */
+                              <90 1>;  /* Unknown, TZ Protected */
+
+       cam_indicator_en: cam-indicator-en-state {
+               pins = "gpio110";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       edp_reg_en: edp-reg-en-state {
+               pins = "gpio70";
+               function = "gpio";
+               drive-strength = <16>;
+               bias-disable;
+       };
+
+       eusb6_reset_n: eusb6-reset-n-state {
+               pins = "gpio184";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               output-low;
+       };
+
+       hall_int_n_default: hall-int-n-state {
+               pins = "gpio92";
+               function = "gpio";
+               bias-disable;
+       };
+
+       hdtl_default: hdtl-default-state {
+               pins = "gpio95";
+               function = "gpio";
+       };
+
+       kybd_default: kybd-default-state {
+               pins = "gpio67";
+               function = "gpio";
+               bias-pull-up;
+       };
+
+       nvme_reg_en: nvme-reg-en-state {
+               pins = "gpio18";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       pcie4_default: pcie4-default-state {
+               clkreq-n-pins {
+                       pins = "gpio147";
+                       function = "pcie4_clk";
+                       drive-strength = <2>;
+                       bias-pull-up;
+               };
+
+               perst-n-pins {
+                       pins = "gpio146";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-disable;
+               };
+
+               wake-n-pins {
+                       pins = "gpio148";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-pull-up;
+               };
+       };
+
+       pcie6a_default: pcie6a-default-state {
+               clkreq-n-pins {
+                       pins = "gpio153";
+                       function = "pcie6a_clk";
+                       drive-strength = <2>;
+                       bias-pull-up;
+               };
+
+               perst-n-pins {
+                       pins = "gpio152";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-disable;
+               };
+
+               wake-n-pins {
+                       pins = "gpio154";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-pull-up;
+               };
+       };
+
+       rtmr1_default: rtmr1-reset-n-active-state {
+               pins = "gpio176";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       tpad_default: tpad-default-state {
+               pins = "gpio3";
+               function = "gpio";
+               bias-disable;
+       };
+
+       usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+               pins = "gpio188";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+               pins = "gpio175";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+               pins = "gpio186";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       wcn_bt_en: wcn-bt-en-state {
+               pins = "gpio116";
+               function = "gpio";
+               drive-strength = <16>;
+               bias-disable;
+       };
+
+       wcn_sw_en: wcn-sw-en-state {
+               pins = "gpio214";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       wcn_wlan_en: wcn-wlan-en-state {
+               pins = "gpio117";
+               function = "gpio";
+               drive-strength = <8>;
+               bias-disable;
+       };
+};
+
+&uart21 {
+       compatible = "qcom,geni-debug-uart";
+
+       status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+       vdd-supply = <&vreg_l3j_0p8>;
+       vdda12-supply = <&vreg_l2j_1p2>;
+
+       phys = <&smb2360_0_eusb2_repeater>;
+
+       status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+       vdda-phy-supply = <&vreg_l2j_1p2>;
+       vdda-pll-supply = <&vreg_l1j_0p9>;
+
+       status = "okay";
+};
+
+&usb_1_ss0 {
+       status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+       dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+       remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+       remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+       vdd-supply = <&vreg_l3j_0p8>;
+       vdda12-supply = <&vreg_l2j_1p2>;
+
+       phys = <&smb2360_1_eusb2_repeater>;
+
+       status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+       vdda-phy-supply = <&vreg_l2j_1p2>;
+       vdda-pll-supply = <&vreg_l2d_0p9>;
+
+       status = "okay";
+};
+
+&usb_1_ss1 {
+       status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+       dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+       remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+       remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_mp {
+       status = "okay";
+};
+
+&usb_mp_hsphy0 {
+       vdd-supply = <&vreg_l2e_0p8>;
+       vdda12-supply = <&vreg_l3e_1p2>;
+
+       status = "okay";
+};
+
+&usb_mp_hsphy1 {
+       vdd-supply = <&vreg_l2e_0p8>;
+       vdda12-supply = <&vreg_l3e_1p2>;
+
+       phys = <&eusb6_repeater>;
+
+       status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+       vdda-phy-supply = <&vreg_l3e_1p2>;
+       vdda-pll-supply = <&vreg_l3c_0p9>;
+
+       status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+       vdda-phy-supply = <&vreg_l3e_1p2>;
+       vdda-pll-supply = <&vreg_l3c_0p9>;
+
+       status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts
new file mode 100644 (file)
index 0000000..5b254d8
--- /dev/null
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-asus-zenbook-a14.dtsi"
+
+/ {
+       model = "ASUS Zenbook A14 (UX3407RA)";
+       compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100";
+};
+
+&gpu_zap_shader {
+       firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn";
+};
+
+&remoteproc_adsp {
+       firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn",
+                       "qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf";
+
+       status = "okay";
+};
+
+&remoteproc_cdsp {
+       firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qccdsp8380.mbn",
+                       "qcom/x1e80100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf";
+
+       status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts
new file mode 100644 (file)
index 0000000..86b1621
--- /dev/null
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "x1p42100.dtsi"
+#include "x1-asus-zenbook-a14.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+       model = "ASUS Zenbook A14 (UX3407QA)";
+       compatible = "asus,zenbook-a14-ux3407qa", "qcom,x1p42100";
+
+       wcn6855-pmu {
+               compatible = "qcom,wcn6855-pmu";
+
+               vddaon-supply = <&vreg_wcn_0p95>;
+               vddio-supply = <&vreg_wcn_1p9>;
+               vddpcie1p3-supply = <&vreg_wcn_1p9>;
+               vddpcie1p9-supply = <&vreg_wcn_1p9>;
+               vddpmu-supply = <&vreg_wcn_0p95>;
+               vddpmucx-supply = <&vreg_wcn_0p95>;
+               vddpmumx-supply = <&vreg_wcn_0p95>;
+               vddrfa0p95-supply = <&vreg_wcn_0p95>;
+               vddrfa1p3-supply = <&vreg_wcn_1p9>;
+               vddrfa1p9-supply = <&vreg_wcn_1p9>;
+
+               bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+               wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+
+               pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>;
+               pinctrl-names = "default";
+
+               regulators {
+                       vreg_pmu_rfa_cmn_0p8: ldo0 {
+                               regulator-name = "vreg_pmu_rfa_cmn_0p8";
+                       };
+
+                       vreg_pmu_aon_0p8: ldo1 {
+                               regulator-name = "vreg_pmu_aon_0p8";
+                       };
+
+                       vreg_pmu_wlcx_0p8: ldo2 {
+                               regulator-name = "vreg_pmu_wlcx_0p8";
+                       };
+
+                       vreg_pmu_wlmx_0p8: ldo3 {
+                               regulator-name = "vreg_pmu_wlmx_0p8";
+                       };
+
+                       vreg_pmu_btcmx_0p8: ldo4 {
+                               regulator-name = "vreg_pmu_btcmx_0p8";
+                       };
+
+                       vreg_pmu_pcie_1p8: ldo5 {
+                               regulator-name = "vreg_pmu_pcie_1p8";
+                       };
+
+                       vreg_pmu_pcie_0p9: ldo6 {
+                               regulator-name = "vreg_pmu_pcie_0p9";
+                       };
+
+                       vreg_pmu_rfa_0p8: ldo7 {
+                               regulator-name = "vreg_pmu_rfa_0p8";
+                       };
+
+                       vreg_pmu_rfa_1p2: ldo8 {
+                               regulator-name = "vreg_pmu_rfa_1p2";
+                       };
+
+                       vreg_pmu_rfa_1p7: ldo9 {
+                               regulator-name = "vreg_pmu_rfa_1p7";
+                       };
+               };
+       };
+};
+
+&gpu_zap_shader {
+       firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn";
+};
+
+&pcie4_port0 {
+       wifi@0 {
+               compatible = "pci17cb,1103";
+               reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+               vddaon-supply = <&vreg_pmu_aon_0p8>;
+               vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+               vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+               vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+               vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+               vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+               vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+               vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+               vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+
+               qcom,calibration-variant = "UX3407Q";
+       };
+};
+
+&remoteproc_adsp {
+       firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn",
+                       "qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf";
+
+       status = "okay";
+};
+
+&remoteproc_cdsp {
+       firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn",
+                       "qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf";
+
+       status = "okay";
+};
+
+&uart14 {
+       status = "okay";
+
+       bluetooth {
+               compatible = "qcom,wcn6855-bt";
+
+               vddaon-supply = <&vreg_pmu_aon_0p8>;
+               vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+               vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+               vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+               vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+               vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+               vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+               vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+
+               max-speed = <3000000>;
+       };
+};