blu='\e[1;34m'; \
std='\e[m'; \
}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+# Restructured Text title and section.
+am__rst_title = sed 's/.*/ & /;h;s/./=/g;p;x;p;g;p;s/.*//'
+am__rst_section = sed 'p;s/./=/g;p;g'
+# Put stdin (possibly several lines separated by ". ") in a box.
+am__text_box = $(AWK) '{ \
+ n = split($$0, lines, "\\. "); max = 0; \
+ for (i = 1; i <= n; ++i) \
+ if (max < length(lines[i])) \
+ max = length(lines[i]); \
+ for (i = 0; i < max; ++i) line = line "="; \
+ print line; \
+ for (i = 1; i <= n; ++i) if (lines[i]) print lines[i];\
+ print line; \
+}'
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL). This contradicts POSIX. Work around the problem
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# To be inserted before the command running the test. Creates the
+# directory for the log if needed. Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log, and passes
+# TESTS_ENVIRONMENT. Save and restore TERM around use of
+# TESTS_ENVIRONMENT, in case that unsets it.
+am__check_pre = \
+$(am__sh_e_setup); \
+$(am__vpath_adj_setup) $(am__vpath_adj) \
+srcdir=$(srcdir); export srcdir; \
+rm -f $@-t; \
+trap 'st=$$?; rm -f '\''$(abs_builddir)/$@-t'\''; (exit $$st); exit $$st' \
+ 1 2 13 15; \
+am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`; \
+test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?; \
+if test -f "./$$f"; then dir=./; \
+elif test -f "$$f"; then dir=; \
+else dir="$(srcdir)/"; fi; \
+tst=$$dir$$f; log='$@'; __SAVED_TERM=$$TERM; \
+$(TESTS_ENVIRONMENT)
+TEST_SUITE_LOG = test-suite.log
+TEST_SUITE_HTML = $(TEST_SUITE_LOG:.log=.html)
+am__test_logs1 = $(TESTS:=.log)
+TEST_LOGS = $(am__test_logs1:.pl.log=.log)
+PL_LOG_COMPILE = $(PL_LOG_COMPILER) $(AM_PL_LOG_FLAGS) $(PL_LOG_FLAGS)
+TEST_LOGS_TMP = $(TEST_LOGS:.log=.log-t)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-TESTS_ENVIRONMENT = $(PERL) -Mstrict -I ../.. -I $(top_srcdir)/lib -w
+PL_LOG_COMPILER = $(PERL)
+PL_LOG_FLAGS = -Mstrict -I ../.. -I $(top_srcdir)/lib -w
+TEST_EXTENSIONS = .pl
TESTS = \
Condition.pl \
Condition-t.pl \
all: all-am
.SUFFIXES:
+.SUFFIXES: .html .log .pl
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
CTAGS:
-check-TESTS: $(TESTS)
- @failed=0; all=0; xfail=0; xpass=0; skip=0; \
- srcdir=$(srcdir); export srcdir; \
- list=' $(TESTS) '; \
- $(am__tty_colors); \
- if test -n "$$list"; then \
- for tst in $$list; do \
- if test -f ./$$tst; then dir=./; \
- elif test -f $$tst; then dir=; \
- else dir="$(srcdir)/"; fi; \
- if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *[\ \ ]$$tst[\ \ ]*) \
- xpass=`expr $$xpass + 1`; \
- failed=`expr $$failed + 1`; \
- col=$$red; res=XPASS; \
- ;; \
- *) \
- col=$$grn; res=PASS; \
- ;; \
- esac; \
- elif test $$? -ne 77; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *[\ \ ]$$tst[\ \ ]*) \
- xfail=`expr $$xfail + 1`; \
- col=$$lgn; res=XFAIL; \
- ;; \
- *) \
- failed=`expr $$failed + 1`; \
- col=$$red; res=FAIL; \
- ;; \
- esac; \
- else \
- skip=`expr $$skip + 1`; \
- col=$$blu; res=SKIP; \
- fi; \
- echo "$${col}$$res$${std}: $$tst"; \
- done; \
- if test "$$all" -eq 1; then \
- tests="test"; \
- All=""; \
- else \
- tests="tests"; \
- All="All "; \
- fi; \
- if test "$$failed" -eq 0; then \
- if test "$$xfail" -eq 0; then \
- banner="$$All$$all $$tests passed"; \
- else \
- if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
- banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
- fi; \
- else \
- if test "$$xpass" -eq 0; then \
- banner="$$failed of $$all $$tests failed"; \
- else \
- if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
- banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
- fi; \
- fi; \
- dashes="$$banner"; \
- skipped=""; \
- if test "$$skip" -ne 0; then \
- if test "$$skip" -eq 1; then \
- skipped="($$skip test was not run)"; \
- else \
- skipped="($$skip tests were not run)"; \
- fi; \
- test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
- dashes="$$skipped"; \
- fi; \
- report=""; \
- if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
- report="Please report to $(PACKAGE_BUGREPORT)"; \
- test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
- dashes="$$report"; \
- fi; \
- dashes=`echo "$$dashes" | sed s/./=/g`; \
- if test "$$failed" -eq 0; then \
- echo "$$grn$$dashes"; \
- else \
- echo "$$red$$dashes"; \
- fi; \
- echo "$$banner"; \
- test -z "$$skipped" || echo "$$skipped"; \
- test -z "$$report" || echo "$$report"; \
- echo "$$dashes$$std"; \
- test "$$failed" -eq 0; \
- else :; fi
+# To be appended to the command running the test. Handle the stdout
+# and stderr redirection, and catch the exit status.
+am__check_post = \
+>$@-t 2>&1; \
+estatus=$$?; \
+if test -n '$(DISABLE_HARD_ERRORS)' \
+ && test $$estatus -eq 99; then \
+ estatus=1; \
+fi; \
+TERM=$$__SAVED_TERM; export TERM; \
+$(am__tty_colors); \
+xfailed=PASS; \
+case " $(XFAIL_TESTS) " in \
+ *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
+ xfailed=XFAIL;; \
+esac; \
+case $$estatus:$$xfailed in \
+ 0:XFAIL) col=$$red; res=XPASS;; \
+ 0:*) col=$$grn; res=PASS ;; \
+ 77:*) col=$$blu; res=SKIP ;; \
+ 99:*) col=$$red; res=FAIL ;; \
+ *:XFAIL) col=$$lgn; res=XFAIL;; \
+ *:*) col=$$red; res=FAIL ;; \
+esac; \
+echo "$${col}$$res$${std}: $$f"; \
+echo "$$res: $$f (exit: $$estatus)" | \
+ $(am__rst_section) >$@; \
+cat $@-t >>$@; \
+rm -f $@-t
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+ @$(am__sh_e_setup); \
+ list='$(TEST_LOGS)'; \
+ results=`for f in $$list; do \
+ read line < $$f && echo "$$line" || echo FAIL; \
+ done`; \
+ all=`echo "$$results" | sed '/^$$/d' | wc -l | sed -e 's/^[ ]*//'`; \
+ fail=`echo "$$results" | grep -c '^FAIL'`; \
+ pass=`echo "$$results" | grep -c '^PASS'`; \
+ skip=`echo "$$results" | grep -c '^SKIP'`; \
+ xfail=`echo "$$results" | grep -c '^XFAIL'`; \
+ xpass=`echo "$$results" | grep -c '^XPASS'`; \
+ failures=`expr $$fail + $$xpass`; \
+ all=`expr $$all - $$skip`; \
+ if test "$$all" -eq 1; then tests=test; All=; \
+ else tests=tests; All="All "; fi; \
+ case fail=$$fail:xpass=$$xpass:xfail=$$xfail in \
+ fail=0:xpass=0:xfail=0) \
+ msg="$$All$$all $$tests passed. "; \
+ exit=true;; \
+ fail=0:xpass=0:xfail=*) \
+ msg="$$All$$all $$tests behaved as expected"; \
+ if test "$$xfail" -eq 1; then xfailures=failure; \
+ else xfailures=failures; fi; \
+ msg="$$msg ($$xfail expected $$xfailures). "; \
+ exit=true;; \
+ fail=*:xpass=0:xfail=*) \
+ msg="$$fail of $$all $$tests failed. "; \
+ exit=false;; \
+ fail=*:xpass=*:xfail=*) \
+ msg="$$failures of $$all $$tests did not behave as expected"; \
+ if test "$$xpass" -eq 1; then xpasses=pass; \
+ else xpasses=passes; fi; \
+ msg="$$msg ($$xpass unexpected $$xpasses). "; \
+ exit=false;; \
+ *) \
+ echo >&2 "incorrect case"; exit 4;; \
+ esac; \
+ if test "$$skip" -ne 0; then \
+ if test "$$skip" -eq 1; then \
+ msg="$$msg($$skip test was not run). "; \
+ else \
+ msg="$$msg($$skip tests were not run). "; \
+ fi; \
+ fi; \
+ { \
+ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
+ $(am__rst_title); \
+ echo "$$msg"; \
+ echo; \
+ echo ".. contents:: :depth: 2"; \
+ echo; \
+ for f in $$list; do \
+ read line < $$f; \
+ case $$line in \
+ PASS:*|XFAIL:*);; \
+ *) echo; cat $$f;; \
+ esac; \
+ done; \
+ } >$(TEST_SUITE_LOG).tmp; \
+ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
+ if test -n '$(LAZY_TEST_SUITE)'; then \
+ msg="$${msg}(tests were rerun lazily). "; \
+ fi; \
+ if test "$$failures" -ne 0; then \
+ msg="$${msg}See $(subdir)/$(TEST_SUITE_LOG). "; \
+ if test -n "$(PACKAGE_BUGREPORT)"; then \
+ msg="$${msg}Please report to $(PACKAGE_BUGREPORT). "; \
+ fi; \
+ fi; \
+ $(am__tty_colors); \
+ if $$exit; then \
+ echo $(ECHO_N) "$$grn$(ECHO_C)"; \
+ else \
+ echo $(ECHO_N) "$$red$(ECHO_C)"; \
+ fi; \
+ echo "$$msg" | $(am__text_box); \
+ echo $(ECHO_N) "$$std$(ECHO_C)"; \
+ test x"$$VERBOSE" = x || $$exit || cat $(TEST_SUITE_LOG); \
+ $$exit
+
+# Run all the tests.
+check-TESTS:
+ @list='$(TEST_LOGS)'; if test -z '$(LAZY_TEST_SUITE)' \
+ && test -n "$$list"; then \
+ rm -f $$list; \
+ fi
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set_logs=; if test "X$(TEST_LOGS)" = X.log; then \
+ set_logs=TEST_LOGS=; \
+ fi; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) $$set_logs
+
+.log.html:
+ @list='$(RST2HTML) $$RST2HTML rst2html rst2html.py'; \
+ for r2h in $$list; do \
+ if ($$r2h --version) >/dev/null 2>&1; then \
+ R2H=$$r2h; \
+ fi; \
+ done; \
+ if test -z "$$R2H"; then \
+ echo >&2 "cannot find rst2html, cannot create $@"; \
+ exit 2; \
+ fi; \
+ $$R2H $< >$@.tmp
+ @mv $@.tmp $@
+
+# Be sure to run check-TESTS first, and then to convert the result.
+# Beware of concurrent executions. And expect check-TESTS to fail.
+check-html:
+ @if $(MAKE) $(AM_MAKEFLAGS) check-TESTS; then :; else \
+ rv=$$?; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_HTML); \
+ exit $$rv; \
+ fi
+.pl.log:
+ @p='$<'; $(am__check_pre) $(PL_LOG_COMPILE) "$$tst" $(am__check_post)
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
+ -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+ -test -z "$(TEST_LOGS_TMP)" || rm -f $(TEST_LOGS_TMP)
+ -test -z "$(TEST_SUITE_HTML)" || rm -f $(TEST_SUITE_HTML)
+ -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
clean-generic:
uninstall-am:
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am check check-TESTS check-am clean clean-generic \
- distclean distclean-generic distdir dvi dvi-am html html-am \
- info info-am install install-am install-data install-data-am \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
- uninstall-am
+.MAKE: check-TESTS check-am check-html install-am install-strip
+
+.PHONY: all all-am check check-TESTS check-am check-html clean \
+ clean-generic distclean distclean-generic distdir dvi dvi-am \
+ html html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
projects / thirdparty / automake.git / commitdiff
