#power-domain-cells = <1>;
};
+ mdss: display-subsystem@ae00000 {
+ compatible = "qcom,qcs8300-mdss";
+ reg = <0x0 0x0ae00000 0x0 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_MDP_CLK>;
+
+ resets = <&dispcc MDSS_DISP_CC_MDSS_CORE_BCR>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem",
+ "cpu-cfg";
+
+ power-domains = <&dispcc MDSS_DISP_CC_MDSS_CORE_GDSC>;
+
+ iommus = <&apps_smmu 0x1000 0x402>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdss_mdp: display-controller@ae01000 {
+ compatible = "qcom,qcs8300-dpu", "qcom,sa8775p-dpu";
+ reg = <0x0 0x0ae01000 0x0 0x8f000>,
+ <0x0 0x0aeb0000 0x0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ interrupts-extended = <&mdss 0>;
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-575000000 {
+ opp-hz = /bits/ 64 <575000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ mdss_dp0_phy: phy@aec2a00 {
+ compatible = "qcom,qcs8300-edp-phy", "qcom,sa8775p-edp-phy";
+
+ reg = <0x0 0x0aec2a00 0x0 0x19c>,
+ <0x0 0x0aec2200 0x0 0xec>,
+ <0x0 0x0aec2600 0x0 0xec>,
+ <0x0 0x0aec2000 0x0 0x1c8>;
+
+ clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux",
+ "cfg_ahb";
+
+ power-domains = <&rpmhpd RPMHPD_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss_dp0: displayport-controller@af54000 {
+ compatible = "qcom,qcs8300-dp", "qcom,sa8775p-dp";
+
+ reg = <0x0 0x0af54000 0x0 0x200>,
+ <0x0 0x0af54200 0x0 0x200>,
+ <0x0 0x0af55000 0x0 0xc00>,
+ <0x0 0x0af56000 0x0 0x09c>,
+ <0x0 0x0af57000 0x0 0x09c>,
+ <0x0 0x0af58000 0x0 0x09c>,
+ <0x0 0x0af59000 0x0 0x09c>,
+ <0x0 0x0af5a000 0x0 0x23c>,
+ <0x0 0x0af5b000 0x0 0x23c>;
+
+ interrupts-extended = <&mdss 12>;
+
+ clocks = <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel",
+ "stream_1_pixel",
+ "stream_2_pixel",
+ "stream_3_pixel";
+ assigned-clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
+ <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dp0_phy 0>,
+ <&mdss_dp0_phy 1>,
+ <&mdss_dp0_phy 1>,
+ <&mdss_dp0_phy 1>,
+ <&mdss_dp0_phy 1>;
+ phys = <&mdss_dp0_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp0_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp0_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+
dispcc: clock-controller@af00000 {
compatible = "qcom,sa8775p-dispcc0";
reg = <0x0 0x0af00000 0x0 0x20000>;
<&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>,
- <0>, <0>, <0>, <0>,
+ <&mdss_dp0_phy 0>,
+ <&mdss_dp0_phy 1>,
+ <0>, <0>,
<0>, <0>, <0>, <0>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
#clock-cells = <1>;
projects / thirdparty / kernel / linux.git / commitdiff
