dt-bindings: gpio: Convert altr,pio-1.0 to DT schema

Convert the altr,pio-1.0 binding to DT schema format. It's a
straight forward conversion.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250714202905.3012386-1-robh@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/altr-pio-1.0.yaml b/Documentation/devicetree/bindings/gpio/altr-pio-1.0.yaml
new file mode 100644 (file)
index 0000000..18afed3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/altr-pio-1.0.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/altr-pio-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera GPIO controller
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+  - Marek Vasut <marex@denx.de>
+  - Mathieu Malaterre <malat@debian.org>
+  - Tien Hock Loh <thloh@altera.com>
+
+properties:
+  compatible:
+    const: altr,pio-1.0
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      First cell is the GPIO offset number. Second cell is reserved and
+      currently unused.
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  altr,ngpio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Width of the GPIO bank.
+    default: 32
+
+  altr,interrupt-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Specifies the interrupt trigger type synthesized by hardware.
+      Values defined in <dt-bindings/interrupt-controller/irq.h>.
+    enum: [1, 2, 3, 4]
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@ff200000 {
+        compatible = "altr,pio-1.0";
+        reg = <0xff200000 0x10>;
+        interrupts = <45 4>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        altr,ngpio = <32>;
+        altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
+    };

diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
deleted file mode 100644 (file)
index 2a80e27..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Altera GPIO controller bindings
-
-Required properties:
-- compatible:
-  - "altr,pio-1.0"
-- reg: Physical base address and length of the controller's registers.
-- #gpio-cells : Should be 2
-  - The first cell is the gpio offset number.
-  - The second cell is reserved and is currently unused.
-- gpio-controller : Marks the device node as a GPIO controller.
-- interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
-  - The first cell is the GPIO offset number within the GPIO controller.
-  - The second cell is the interrupt trigger type and level flags.
-- interrupts: Specify the interrupt.
-- altr,interrupt-type: Specifies the interrupt trigger type the GPIO
-  hardware is synthesized. This field is required if the Altera GPIO controller
-  used has IRQ enabled as the interrupt type is not software controlled,
-  but hardware synthesized. Required if GPIO is used as an interrupt
-  controller. The value is defined in <dt-bindings/interrupt-controller/irq.h>
-  Only the following flags are supported:
-    IRQ_TYPE_EDGE_RISING
-    IRQ_TYPE_EDGE_FALLING
-    IRQ_TYPE_EDGE_BOTH
-    IRQ_TYPE_LEVEL_HIGH
-
-Optional properties:
-- altr,ngpio: Width of the GPIO bank. This defines how many pins the
-  GPIO device has. Ranges between 1-32. Optional and defaults to 32 if not
-  specified.
-
-Example:
-
-gpio_altr: gpio@ff200000 {
-       compatible = "altr,pio-1.0";
-       reg = <0xff200000 0x10>;
-       interrupts = <0 45 4>;
-       altr,ngpio = <32>;
-       altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
-       #gpio-cells = <2>;
-       gpio-controller;
-       #interrupt-cells = <2>;
-       interrupt-controller;
-};