--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * IEEE 802.11 mesh definitions
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright (c) 2005, Devicescape Software, Inc.
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH
+ * Copyright (c) 2016 - 2017 Intel Deutschland GmbH
+ * Copyright (c) 2018 - 2025 Intel Corporation
+ */
+
+#ifndef LINUX_IEEE80211_MESH_H
+#define LINUX_IEEE80211_MESH_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#define IEEE80211_MAX_MESH_ID_LEN 32
+
+struct ieee80211s_hdr {
+ u8 flags;
+ u8 ttl;
+ __le32 seqnum;
+ u8 eaddr1[ETH_ALEN];
+ u8 eaddr2[ETH_ALEN];
+} __packed __aligned(2);
+
+/* Mesh flags */
+#define MESH_FLAGS_AE_A4 0x1
+#define MESH_FLAGS_AE_A5_A6 0x2
+#define MESH_FLAGS_AE 0x3
+#define MESH_FLAGS_PS_DEEP 0x4
+
+/**
+ * enum ieee80211_preq_flags - mesh PREQ element flags
+ *
+ * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield
+ */
+enum ieee80211_preq_flags {
+ IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2,
+};
+
+/**
+ * enum ieee80211_preq_target_flags - mesh PREQ element per target flags
+ *
+ * @IEEE80211_PREQ_TO_FLAG: target only subfield
+ * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield
+ */
+enum ieee80211_preq_target_flags {
+ IEEE80211_PREQ_TO_FLAG = 1<<0,
+ IEEE80211_PREQ_USN_FLAG = 1<<2,
+};
+
+/**
+ * struct ieee80211_mesh_chansw_params_ie - mesh channel switch parameters IE
+ * @mesh_ttl: Time To Live
+ * @mesh_flags: Flags
+ * @mesh_reason: Reason Code
+ * @mesh_pre_value: Precedence Value
+ *
+ * This structure represents the payload of the "Mesh Channel Switch
+ * Parameters element" as described in IEEE Std 802.11-2020 section
+ * 9.4.2.102.
+ */
+struct ieee80211_mesh_chansw_params_ie {
+ u8 mesh_ttl;
+ u8 mesh_flags;
+ __le16 mesh_reason;
+ __le16 mesh_pre_value;
+} __packed;
+
+/**
+ * struct ieee80211_meshconf_ie - Mesh Configuration element
+ * @meshconf_psel: Active Path Selection Protocol Identifier
+ * @meshconf_pmetric: Active Path Selection Metric Identifier
+ * @meshconf_congest: Congestion Control Mode Identifier
+ * @meshconf_synch: Synchronization Method Identifier
+ * @meshconf_auth: Authentication Protocol Identifier
+ * @meshconf_form: Mesh Formation Info
+ * @meshconf_cap: Mesh Capability (see &enum mesh_config_capab_flags)
+ *
+ * This structure represents the payload of the "Mesh Configuration
+ * element" as described in IEEE Std 802.11-2020 section 9.4.2.97.
+ */
+struct ieee80211_meshconf_ie {
+ u8 meshconf_psel;
+ u8 meshconf_pmetric;
+ u8 meshconf_congest;
+ u8 meshconf_synch;
+ u8 meshconf_auth;
+ u8 meshconf_form;
+ u8 meshconf_cap;
+} __packed;
+
+/**
+ * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags
+ *
+ * @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish
+ * additional mesh peerings with other mesh STAs
+ * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs
+ * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure
+ * is ongoing
+ * @IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL: STA is in deep sleep mode or has
+ * neighbors in deep sleep mode
+ *
+ * Enumerates the "Mesh Capability" as described in IEEE Std
+ * 802.11-2020 section 9.4.2.97.7.
+ */
+enum mesh_config_capab_flags {
+ IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01,
+ IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08,
+ IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20,
+ IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL = 0x40,
+};
+
+#define IEEE80211_MESHCONF_FORM_CONNECTED_TO_GATE 0x1
+
+/*
+ * mesh channel switch parameters element's flag indicator
+ *
+ */
+#define WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT BIT(0)
+#define WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR BIT(1)
+#define WLAN_EID_CHAN_SWITCH_PARAM_REASON BIT(2)
+
+/**
+ * struct ieee80211_rann_ie - RANN (root announcement) element
+ * @rann_flags: Flags
+ * @rann_hopcount: Hop Count
+ * @rann_ttl: Element TTL
+ * @rann_addr: Root Mesh STA Address
+ * @rann_seq: HWMP Sequence Number
+ * @rann_interval: Interval
+ * @rann_metric: Metric
+ *
+ * This structure represents the payload of the "RANN element" as
+ * described in IEEE Std 802.11-2020 section 9.4.2.111.
+ */
+struct ieee80211_rann_ie {
+ u8 rann_flags;
+ u8 rann_hopcount;
+ u8 rann_ttl;
+ u8 rann_addr[ETH_ALEN];
+ __le32 rann_seq;
+ __le32 rann_interval;
+ __le32 rann_metric;
+} __packed;
+
+enum ieee80211_rann_flags {
+ RANN_FLAG_IS_GATE = 1 << 0,
+};
+
+/* Mesh action codes */
+enum ieee80211_mesh_actioncode {
+ WLAN_MESH_ACTION_LINK_METRIC_REPORT,
+ WLAN_MESH_ACTION_HWMP_PATH_SELECTION,
+ WLAN_MESH_ACTION_GATE_ANNOUNCEMENT,
+ WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION,
+ WLAN_MESH_ACTION_MCCA_SETUP_REQUEST,
+ WLAN_MESH_ACTION_MCCA_SETUP_REPLY,
+ WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST,
+ WLAN_MESH_ACTION_MCCA_ADVERTISEMENT,
+ WLAN_MESH_ACTION_MCCA_TEARDOWN,
+ WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST,
+ WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE,
+};
+
+/**
+ * enum ieee80211_mesh_sync_method - mesh synchronization method identifier
+ *
+ * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method
+ * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method
+ * that will be specified in a vendor specific information element
+ */
+enum ieee80211_mesh_sync_method {
+ IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1,
+ IEEE80211_SYNC_METHOD_VENDOR = 255,
+};
+
+/**
+ * enum ieee80211_mesh_path_protocol - mesh path selection protocol identifier
+ *
+ * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
+ * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
+ * be specified in a vendor specific information element
+ */
+enum ieee80211_mesh_path_protocol {
+ IEEE80211_PATH_PROTOCOL_HWMP = 1,
+ IEEE80211_PATH_PROTOCOL_VENDOR = 255,
+};
+
+/**
+ * enum ieee80211_mesh_path_metric - mesh path selection metric identifier
+ *
+ * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
+ * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
+ * specified in a vendor specific information element
+ */
+enum ieee80211_mesh_path_metric {
+ IEEE80211_PATH_METRIC_AIRTIME = 1,
+ IEEE80211_PATH_METRIC_VENDOR = 255,
+};
+
+/**
+ * enum ieee80211_root_mode_identifier - root mesh STA mode identifier
+ *
+ * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode
+ *
+ * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default)
+ * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than
+ * this value
+ * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports
+ * the proactive PREQ with proactive PREP subfield set to 0
+ * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA
+ * supports the proactive PREQ with proactive PREP subfield set to 1
+ * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports
+ * the proactive RANN
+ */
+enum ieee80211_root_mode_identifier {
+ IEEE80211_ROOTMODE_NO_ROOT = 0,
+ IEEE80211_ROOTMODE_ROOT = 1,
+ IEEE80211_PROACTIVE_PREQ_NO_PREP = 2,
+ IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3,
+ IEEE80211_PROACTIVE_RANN = 4,
+};
+
+#endif /* LINUX_IEEE80211_MESH_H */
#define IEEE80211_MAX_SSID_LEN 32
-#define IEEE80211_MAX_MESH_ID_LEN 32
-
#define IEEE80211_FIRST_TSPEC_TSID 8
#define IEEE80211_NUM_TIDS 16
return le16_get_bits(hdr->seq_ctrl, IEEE80211_SCTL_SEQ);
}
-struct ieee80211s_hdr {
- u8 flags;
- u8 ttl;
- __le32 seqnum;
- u8 eaddr1[ETH_ALEN];
- u8 eaddr2[ETH_ALEN];
-} __packed __aligned(2);
-
-/* Mesh flags */
-#define MESH_FLAGS_AE_A4 0x1
-#define MESH_FLAGS_AE_A5_A6 0x2
-#define MESH_FLAGS_AE 0x3
-#define MESH_FLAGS_PS_DEEP 0x4
-
-/**
- * enum ieee80211_preq_flags - mesh PREQ element flags
- *
- * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield
- */
-enum ieee80211_preq_flags {
- IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2,
-};
-
-/**
- * enum ieee80211_preq_target_flags - mesh PREQ element per target flags
- *
- * @IEEE80211_PREQ_TO_FLAG: target only subfield
- * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield
- */
-enum ieee80211_preq_target_flags {
- IEEE80211_PREQ_TO_FLAG = 1<<0,
- IEEE80211_PREQ_USN_FLAG = 1<<2,
-};
-
/**
* struct ieee80211_quiet_ie - Quiet element
* @count: Quiet Count
u8 sec_chan_offs;
} __packed;
-/**
- * struct ieee80211_mesh_chansw_params_ie - mesh channel switch parameters IE
- * @mesh_ttl: Time To Live
- * @mesh_flags: Flags
- * @mesh_reason: Reason Code
- * @mesh_pre_value: Precedence Value
- *
- * This structure represents the payload of the "Mesh Channel Switch
- * Parameters element" as described in IEEE Std 802.11-2020 section
- * 9.4.2.102.
- */
-struct ieee80211_mesh_chansw_params_ie {
- u8 mesh_ttl;
- u8 mesh_flags;
- __le16 mesh_reason;
- __le16 mesh_pre_value;
-} __packed;
-
/**
* struct ieee80211_wide_bw_chansw_ie - wide bandwidth channel switch IE
* @new_channel_width: New Channel Width
};
} __packed;
-/**
- * struct ieee80211_meshconf_ie - Mesh Configuration element
- * @meshconf_psel: Active Path Selection Protocol Identifier
- * @meshconf_pmetric: Active Path Selection Metric Identifier
- * @meshconf_congest: Congestion Control Mode Identifier
- * @meshconf_synch: Synchronization Method Identifier
- * @meshconf_auth: Authentication Protocol Identifier
- * @meshconf_form: Mesh Formation Info
- * @meshconf_cap: Mesh Capability (see &enum mesh_config_capab_flags)
- *
- * This structure represents the payload of the "Mesh Configuration
- * element" as described in IEEE Std 802.11-2020 section 9.4.2.97.
- */
-struct ieee80211_meshconf_ie {
- u8 meshconf_psel;
- u8 meshconf_pmetric;
- u8 meshconf_congest;
- u8 meshconf_synch;
- u8 meshconf_auth;
- u8 meshconf_form;
- u8 meshconf_cap;
-} __packed;
-
-/**
- * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags
- *
- * @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish
- * additional mesh peerings with other mesh STAs
- * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs
- * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure
- * is ongoing
- * @IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL: STA is in deep sleep mode or has
- * neighbors in deep sleep mode
- *
- * Enumerates the "Mesh Capability" as described in IEEE Std
- * 802.11-2020 section 9.4.2.97.7.
- */
-enum mesh_config_capab_flags {
- IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01,
- IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08,
- IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20,
- IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL = 0x40,
-};
-
-#define IEEE80211_MESHCONF_FORM_CONNECTED_TO_GATE 0x1
-
-/*
- * mesh channel switch parameters element's flag indicator
- *
- */
-#define WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT BIT(0)
-#define WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR BIT(1)
-#define WLAN_EID_CHAN_SWITCH_PARAM_REASON BIT(2)
-
-/**
- * struct ieee80211_rann_ie - RANN (root announcement) element
- * @rann_flags: Flags
- * @rann_hopcount: Hop Count
- * @rann_ttl: Element TTL
- * @rann_addr: Root Mesh STA Address
- * @rann_seq: HWMP Sequence Number
- * @rann_interval: Interval
- * @rann_metric: Metric
- *
- * This structure represents the payload of the "RANN element" as
- * described in IEEE Std 802.11-2020 section 9.4.2.111.
- */
-struct ieee80211_rann_ie {
- u8 rann_flags;
- u8 rann_hopcount;
- u8 rann_ttl;
- u8 rann_addr[ETH_ALEN];
- __le32 rann_seq;
- __le32 rann_interval;
- __le32 rann_metric;
-} __packed;
-
-enum ieee80211_rann_flags {
- RANN_FLAG_IS_GATE = 1 << 0,
-};
-
enum ieee80211_ht_chanwidth_values {
IEEE80211_HT_CHANWIDTH_20MHZ = 0,
IEEE80211_HT_CHANWIDTH_ANY = 1,
WLAN_SP_MGK_ACK = 5,
};
-/* Mesh action codes */
-enum ieee80211_mesh_actioncode {
- WLAN_MESH_ACTION_LINK_METRIC_REPORT,
- WLAN_MESH_ACTION_HWMP_PATH_SELECTION,
- WLAN_MESH_ACTION_GATE_ANNOUNCEMENT,
- WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION,
- WLAN_MESH_ACTION_MCCA_SETUP_REQUEST,
- WLAN_MESH_ACTION_MCCA_SETUP_REPLY,
- WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST,
- WLAN_MESH_ACTION_MCCA_ADVERTISEMENT,
- WLAN_MESH_ACTION_MCCA_TEARDOWN,
- WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST,
- WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE,
-};
-
/* Unprotected WNM action codes */
enum ieee80211_unprotected_wnm_actioncode {
WLAN_UNPROTECTED_WNM_ACTION_TIM = 0,
/* BSS Coex IE information field bits */
#define WLAN_BSS_COEX_INFORMATION_REQUEST BIT(0)
-/**
- * enum ieee80211_mesh_sync_method - mesh synchronization method identifier
- *
- * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method
- * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method
- * that will be specified in a vendor specific information element
- */
-enum ieee80211_mesh_sync_method {
- IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1,
- IEEE80211_SYNC_METHOD_VENDOR = 255,
-};
-
-/**
- * enum ieee80211_mesh_path_protocol - mesh path selection protocol identifier
- *
- * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
- * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
- * be specified in a vendor specific information element
- */
-enum ieee80211_mesh_path_protocol {
- IEEE80211_PATH_PROTOCOL_HWMP = 1,
- IEEE80211_PATH_PROTOCOL_VENDOR = 255,
-};
-
-/**
- * enum ieee80211_mesh_path_metric - mesh path selection metric identifier
- *
- * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
- * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
- * specified in a vendor specific information element
- */
-enum ieee80211_mesh_path_metric {
- IEEE80211_PATH_METRIC_AIRTIME = 1,
- IEEE80211_PATH_METRIC_VENDOR = 255,
-};
-
-/**
- * enum ieee80211_root_mode_identifier - root mesh STA mode identifier
- *
- * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode
- *
- * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default)
- * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than
- * this value
- * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports
- * the proactive PREQ with proactive PREP subfield set to 0
- * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA
- * supports the proactive PREQ with proactive PREP subfield set to 1
- * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports
- * the proactive RANN
- */
-enum ieee80211_root_mode_identifier {
- IEEE80211_ROOTMODE_NO_ROOT = 0,
- IEEE80211_ROOTMODE_ROOT = 1,
- IEEE80211_PROACTIVE_PREQ_NO_PREP = 2,
- IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3,
- IEEE80211_PROACTIVE_RANN = 4,
-};
-
/*
* IEEE 802.11-2007 7.3.2.9 Country information element
*
#define NAN_DEV_CAPA_NDPE_SUPPORTED 0x08
#define NAN_DEV_CAPA_S3_SUPPORTED 0x10
+#include "ieee80211-mesh.h"
+
#endif /* LINUX_IEEE80211_H */
projects / thirdparty / kernel / linux.git / commitdiff
