arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640

TechNexion TEVI OV5640 camera is a 5MP camera that can be used with
J722S EVM through the 22-pin CSI-RX connector. Add a reference overlay
for quad TEVI OV5640 modules on J722S EVM.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250509091911.2442934-5-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 281a282fcbfbcc1d37dfa71c284c84c308e2e7b7..c6171de9fe880320ef8e9dd0bd879c912010f0fe 100644 (file)
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo
 
 # Boards with J784s4 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
@@ -228,6 +229,8 @@ k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
        k3-j721s2-evm-pcie1-ep.dtbo
 k3-j722s-evm-csi2-quad-rpi-cam-imx219-dtbs := k3-j722s-evm.dtb \
        k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo
+k3-j722s-evm-csi2-quad-tevi-ov5640-dtbs := k3-j722s-evm.dtb \
+       k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo
 k3-j742s2-evm-usb0-type-a-dtbs := k3-j742s2-evm.dtb \
        k3-j784s4-j742s2-evm-usb0-type-a.dtbo
 k3-j784s4-evm-pcie0-pcie1-ep-dtbs := k3-j784s4-evm.dtb \
@@ -267,6 +270,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
        k3-j721e-sk-csi2-dual-imx219.dtb \
        k3-j721s2-evm-pcie1-ep.dtb \
        k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtb \
+       k3-j722s-evm-csi2-quad-tevi-ov5640.dtb \
        k3-j742s2-evm-usb0-type-a.dtb \
        k3-j784s4-evm-pcie0-pcie1-ep.dtb \
        k3-j784s4-evm-quad-port-eth-exp1.dtb \

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso
new file mode 100644 (file)
index 0000000..575113d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DT Overlay for 4 x TEVI OV5640 MIPI Camera module on J722S-EVM board.
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&main_pmx0 {
+       cam0_reset_pins_default: cam0-default-reset-pins {
+               pinctrl-single,pins = <
+                       J722S_IOPAD(0x03c, PIN_OUTPUT, 7) /* (R22) GPIO0_15 */
+               >;
+       };
+
+       cam1_reset_pins_default: cam1-default-reset-pins {
+               pinctrl-single,pins = <
+                       J722S_IOPAD(0x044, PIN_OUTPUT, 7) /* (R26) GPIO0_17 */
+               >;
+       };
+
+       cam2_reset_pins_default: cam2-default-reset-pins {
+               pinctrl-single,pins = <
+                       J722S_IOPAD(0x04c, PIN_OUTPUT, 7) /* (T25) GPIO0_19 */
+               >;
+       };
+
+       cam3_reset_pins_default: cam3-default-reset-pins {
+               pinctrl-single,pins = <
+                       J722S_IOPAD(0x054, PIN_OUTPUT, 7) /* (T21) GPIO0_21 */
+               >;
+       };
+};
+
+&{/} {
+       clk_ov5640_fixed: clock-24000000 {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <24000000>;
+       };
+
+       reg_2p8v: regulator-2p8v {
+               compatible = "regulator-fixed";
+               regulator-name = "2P8V";
+               regulator-min-microvolt = <2800000>;
+               regulator-max-microvolt = <2800000>;
+               vin-supply = <&vsys_3v3_exp>;
+               regulator-always-on;
+       };
+
+       reg_1p8v: regulator-1p8v {
+               compatible = "regulator-fixed";
+               regulator-name = "1P8V";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&vsys_3v3_exp>;
+               regulator-always-on;
+       };
+
+       reg_3p3v: regulator-3p3v {
+               compatible = "regulator-fixed";
+               regulator-name = "3P3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&vsys_3v3_exp>;
+               regulator-always-on;
+       };
+};
+
+&csi01_mux {
+       idle-state = <1>;
+};
+
+&csi23_mux {
+       idle-state = <1>;
+};
+
+&pca9543_0 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       /* CAM0 I2C */
+       i2c@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+
+               ov5640_0: camera@3c {
+                       compatible = "ovti,ov5640";
+                       reg = <0x3c>;
+                       clocks = <&clk_ov5640_fixed>;
+                       clock-names = "xclk";
+
+                       AVDD-supply = <&reg_2p8v>;
+                       DOVDD-supply = <&reg_1p8v>;
+                       DVDD-supply = <&reg_3p3v>;
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&cam0_reset_pins_default>;
+
+                       reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>;
+
+                       port {
+                               csi2_cam0: endpoint {
+                                       remote-endpoint = <&csi2rx0_in_sensor>;
+                                       clock-lanes = <0>;
+                                       data-lanes = <1 2>;
+                               };
+                       };
+               };
+       };
+
+       /* CAM1 I2C */
+       i2c@1 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <1>;
+
+               ov5640_1: camera@3c {
+                       compatible = "ovti,ov5640";
+                       reg = <0x3c>;
+                       clocks = <&clk_ov5640_fixed>;
+                       clock-names = "xclk";
+
+                       AVDD-supply = <&reg_2p8v>;
+                       DOVDD-supply = <&reg_1p8v>;
+                       DVDD-supply = <&reg_3p3v>;
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&cam1_reset_pins_default>;
+
+                       reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>;
+
+                       port {
+                               csi2_cam1: endpoint {
+                                       remote-endpoint = <&csi2rx1_in_sensor>;
+                                       clock-lanes = <0>;
+                                       data-lanes = <1 2>;
+                               };
+                       };
+               };
+       };
+};
+
+&pca9543_1 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       /* CAM0 I2C */
+       i2c@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+
+               ov5640_2: camera@3c {
+                       compatible = "ovti,ov5640";
+                       reg = <0x3c>;
+                       clocks = <&clk_ov5640_fixed>;
+                       clock-names = "xclk";
+
+                       AVDD-supply = <&reg_2p8v>;
+                       DOVDD-supply = <&reg_1p8v>;
+                       DVDD-supply = <&reg_3p3v>;
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&cam2_reset_pins_default>;
+
+                       reset-gpios = <&main_gpio0 19 GPIO_ACTIVE_HIGH>;
+
+                       port {
+                               csi2_cam2: endpoint {
+                                       remote-endpoint = <&csi2rx2_in_sensor>;
+                                       clock-lanes = <0>;
+                                       data-lanes = <1 2>;
+                               };
+                       };
+               };
+       };
+
+       /* CAM1 I2C */
+       i2c@1 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <1>;
+
+               ov5640_3: camera@3c {
+                       compatible = "ovti,ov5640";
+                       reg = <0x3c>;
+                       clocks = <&clk_ov5640_fixed>;
+                       clock-names = "xclk";
+
+                       AVDD-supply = <&reg_2p8v>;
+                       DOVDD-supply = <&reg_1p8v>;
+                       DVDD-supply = <&reg_3p3v>;
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&cam3_reset_pins_default>;
+
+                       reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+
+                       port {
+                               csi2_cam3: endpoint {
+                                       remote-endpoint = <&csi2rx3_in_sensor>;
+                                       clock-lanes = <0>;
+                                       data-lanes = <1 2>;
+                               };
+                       };
+               };
+       };
+};
+
+&cdns_csi2rx0 {
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               csi0_port0: port@0 {
+                       reg = <0>;
+                       status = "okay";
+
+                       csi2rx0_in_sensor: endpoint {
+                               remote-endpoint = <&csi2_cam0>;
+                               bus-type = <4>; /* CSI2 DPHY */
+                               clock-lanes = <0>;
+                               data-lanes = <1 2>;
+                       };
+               };
+       };
+};
+
+&cdns_csi2rx1 {
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               csi1_port0: port@0 {
+                       reg = <0>;
+                       status = "okay";
+
+                       csi2rx1_in_sensor: endpoint {
+                               remote-endpoint = <&csi2_cam1>;
+                               bus-type = <4>; /* CSI2 DPHY */
+                               clock-lanes = <0>;
+                               data-lanes = <1 2>;
+                       };
+               };
+       };
+};
+
+&cdns_csi2rx2 {
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               csi2_port0: port@0 {
+                       reg = <0>;
+                       status = "okay";
+
+                       csi2rx2_in_sensor: endpoint {
+                               remote-endpoint = <&csi2_cam2>;
+                               bus-type = <4>; /* CSI2 DPHY */
+                               clock-lanes = <0>;
+                               data-lanes = <1 2>;
+                       };
+               };
+       };
+};
+
+&cdns_csi2rx3 {
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               csi3_port0: port@0 {
+                       reg = <0>;
+                       status = "okay";
+
+                       csi2rx3_in_sensor: endpoint {
+                               remote-endpoint = <&csi2_cam3>;
+                               bus-type = <4>; /* CSI2 DPHY */
+                               clock-lanes = <0>;
+                               data-lanes = <1 2>;
+                       };
+               };
+       };
+};
+
+&ti_csi2rx0 {
+       status = "okay";
+};
+
+&dphy0 {
+       status = "okay";
+};
+
+&ti_csi2rx1 {
+       status = "okay";
+};
+
+&dphy1 {
+       status = "okay";
+};
+
+&ti_csi2rx2 {
+       status = "okay";
+};
+
+&dphy2 {
+       status = "okay";
+};
+
+&ti_csi2rx3 {
+       status = "okay";
+};
+
+&dphy3 {
+       status = "okay";
+};