+(4.3.92) 2016/04/27 Released by Harlan Stenn <stenn@ntp.org>
From ntp-4.2.8p7:
* [Sec 2901] KoD packets must have non-zero transmit timestamps. HStenn.
* [Sec 2936] Skeleton Key: Any system knowing the trusted key can serve
#
# EDIT THIS FILE WITH CAUTION (invoke-ntp.conf.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:04:08 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:58:36 AM by AutoGen 5.18.5
# From the definitions ntp.conf.def
# and the template file agtexi-file.tpl
@end ignore
If the Basic Socket Interface Extensions for IPv6 (RFC-2553)
is detected, support for the IPv6 address family is generated
in addition to the default support of the IPv4 address family.
-In a few cases, including the reslist billboard generated
-by ntpdc, IPv6 addresses are automatically generated.
+In a few cases, including the
+@code{reslist}
+billboard generated
+by
+@code{ntpq(1ntpqmdoc)}
+or
+@code{ntpdc(1ntpdcmdoc)},
+IPv6 addresses are automatically generated.
IPv6 addresses can be identified by the presence of colons
@quotedblleft{}:@quotedblright{}
in the address field.
equivalent classes for that address family.
@table @asis
@item @code{pool} @kbd{address} @code{[@code{burst}]} @code{[@code{iburst}]} @code{[@code{version} @kbd{version}]} @code{[@code{prefer}]} @code{[@code{minpoll} @kbd{minpoll}]} @code{[@code{maxpoll} @kbd{maxpoll}]}
-@item @code{server} @kbd{address} @code{[@code{key} @kbd{key} @kbd{|} @code{autokey}]} @code{[@code{burst}]} @code{[@code{iburst}]} @code{[@code{version} @kbd{version}]} @code{[@code{prefer}]} @code{[@code{minpoll} @kbd{minpoll}]} @code{[@code{maxpoll} @kbd{maxpoll}]}
-@item @code{peer} @kbd{address} @code{[@code{key} @kbd{key} @kbd{|} @code{autokey}]} @code{[@code{version} @kbd{version}]} @code{[@code{prefer}]} @code{[@code{minpoll} @kbd{minpoll}]} @code{[@code{maxpoll} @kbd{maxpoll}]}
-@item @code{broadcast} @kbd{address} @code{[@code{key} @kbd{key} @kbd{|} @code{autokey}]} @code{[@code{version} @kbd{version}]} @code{[@code{prefer}]} @code{[@code{minpoll} @kbd{minpoll}]} @code{[@code{ttl} @kbd{ttl}]}
+@item @code{server} @kbd{address} @code{[@code{key} @kbd{key} @kbd{|} @code{autokey}]} @code{[@code{burst}]} @code{[@code{iburst}]} @code{[@code{version} @kbd{version}]} @code{[@code{prefer}]} @code{[@code{minpoll} @kbd{minpoll}]} @code{[@code{maxpoll} @kbd{maxpoll}]} @code{[@code{true}]}
+@item @code{peer} @kbd{address} @code{[@code{key} @kbd{key} @kbd{|} @code{autokey}]} @code{[@code{version} @kbd{version}]} @code{[@code{prefer}]} @code{[@code{minpoll} @kbd{minpoll}]} @code{[@code{maxpoll} @kbd{maxpoll}]} @code{[@code{true}]} @code{[@code{xleave}]}
+@item @code{broadcast} @kbd{address} @code{[@code{key} @kbd{key} @kbd{|} @code{autokey}]} @code{[@code{version} @kbd{version}]} @code{[@code{prefer}]} @code{[@code{minpoll} @kbd{minpoll}]} @code{[@code{ttl} @kbd{ttl}]} @code{[@code{xleave}]}
@item @code{manycastclient} @kbd{address} @code{[@code{key} @kbd{key} @kbd{|} @code{autokey}]} @code{[@code{version} @kbd{version}]} @code{[@code{prefer}]} @code{[@code{minpoll} @kbd{minpoll}]} @code{[@code{maxpoll} @kbd{maxpoll}]} @code{[@code{ttl} @kbd{ttl}]}
@end table
instead of the usual one.
The packet spacing is normally 2 s;
however, the spacing between the first and second packets
-can be changed with the calldelay command to allow
+can be changed with the
+@code{calldelay}
+command to allow
additional time for a modem or ISDN call to complete.
This is designed to improve timekeeping quality
with the
instead of the usual one.
The packet spacing is normally 2 s;
however, the spacing between the first two packets can be
-changed with the calldelay command to allow
+changed with the
+@code{calldelay}
+command to allow
additional time for a modem or ISDN call to complete.
This is designed to speed the initial synchronization
acquisition with the
@item @code{noselect}
Marks the server as unused, except for display purposes.
The server is discarded by the selection algroithm.
+@item @code{preempt}
+Says the association can be preempted.
+@item @code{true}
+Marks the server as a truechimer.
+Use this option only for testing.
@item @code{prefer}
Marks the server as preferred.
All other things being equal,
provided in
@file{/usr/share/doc/ntp})
for further information.
+@item @code{true}
+Forces the association to always survive the selection and clustering algorithms.
+This option should almost certainly
+@emph{only}
+be used while testing an association.
@item @code{ttl} @kbd{ttl}
This option is used only with broadcast server and manycast
client modes.
packets.
Versions 1-4 are the choices, with version 4 the
default.
+@item @code{xleave}
+Valid in
+@code{peer}
+and
+@code{broadcast}
+modes only, this flag enables interleave mode.
@end table
@subsubsection Auxiliary Commands
@table @asis
commands and also by remote
configuration commands sent by a
@code{ntpdc(1ntpdcmdoc)}
-program running in
+program running on
another machine.
If this flag is enabled, which is the default
case, new broadcast client and symmetric passive associations and
all of which are bound together by the protocol specifically
to deflect masquerade attacks.
For this reason Autokey
-includes the source and destinatino IP addresses in message digest
+includes the source and destination IP addresses in message digest
computations and so the same addresses must be available
at both the server and client.
For this reason operation
@file{ntpkey_key_}@kbd{hostname}
in the keys directory.
@item @code{iffpar} @kbd{file}
-Specifies the location of the optional IFF parameters file.This
-overrides the link
+Specifies the location of the optional IFF parameters file.
+This overrides the link
@file{ntpkey_iff_}@kbd{hostname}
in the keys directory.
@item @code{leap} @kbd{file}
in the keys directory.
@item @code{mvpar} @kbd{file}
Specifies the location of the optional MV parameters file.
-This
-overrides the link
+This overrides the link
@file{ntpkey_mv_}@kbd{hostname}
in the keys directory.
@item @code{pw} @kbd{password}
Statistic files are managed using file generation sets
and scripts in the
@file{./scripts}
-directory of this distribution.
+directory of the source code distribution.
Using
these facilities and
@sc{unix}
the number of links of this file is one, it is renamed appending a
dot, the letter
@code{C},
-and the pid of the ntpd server process.
+and the pid of the
+@code{ntpd(1ntpdmdoc)}
+server process.
When the
number of links is greater than one, the file is unlinked.
This
by a determined cracker.
Clients can be denied service because they are explicitly
-included in the restrict list created by the restrict command
+included in the restrict list created by the
+@code{restrict}
+command
or implicitly as the result of cryptographic or rate limit
violations.
Cryptographic violations include certificate
Some violations cause denied service
only for the offending packet, others cause denied service
for a timed period and others cause the denied service for
-an indefinate period.
+an indefinite period.
When a client or network is denied access
-for an indefinate period, the only way at present to remove
+for an indefinite period, the only way at present to remove
the restrictions is by restarting the server.
@subsubsection The Kiss-of-Death Packet
Ordinarily, packets denied service are simply dropped with no
and a kiss-o'-death packet returned if enabled.
The default
minimum average and minimum are 5 and 2, respectively.
-The monitor subcommand specifies the probability of discard
+The
+@code{monitor}
+subcommand specifies the probability of discard
for packets that overflow the rate-control window.
@item @code{restrict} @code{address} @code{[@code{mask} @kbd{mask}]} @code{[@kbd{flag} @kbd{...}]}
The
last one, the packet is dropped.
@item @code{limited}
Deny service if the packet spacing violates the lower limits specified
-in the discard command.
+in the
+@code{discard}
+command.
A history of clients is kept using the
monitoring capability of
@code{ntpd(1ntpdmdoc)}.
@item @code{notrap}
Decline to provide mode 6 control message trap service to matching
hosts.
-The trap service is a subsystem of the ntpdq control message
+The trap service is a subsystem of the
+@code{ntpq(1ntpqmdoc)}
+control message
protocol which is intended for use by remote event logging programs.
@item @code{notrust}
Deny service unless the packet is cryptographically authenticated.
as well and is highly recommended, especially for broadcast modes.
A persistent manycast client association is configured
-using the manycastclient command, which is similar to the
-server command but with a multicast (IPv4 class
+using the
+@code{manycastclient}
+command, which is similar to the
+@code{server}
+command but with a multicast (IPv4 class
@code{D}
or IPv6 prefix
@code{FF})
@code{maxpolll}
value specified in this command.
Initially, the TTL is
-set at the minimum hops specified by the ttl command.
+set at the minimum hops specified by the
+@code{ttl}
+command.
At each retransmission the TTL is increased until reaching
the maximum hops specified by this command or a sufficient
number client associations have been found.
otherwise, should be avoided.
@item @code{dscp} @kbd{value}
This option specifies the Differentiated Services Control Point (DSCP) value,
-a 6-bit code. The default value is 46, signifying Expedited Forwarding.
+a 6-bit code.
+The default value is 46, signifying Expedited Forwarding.
@item @code{enable} @code{[@code{auth} | @code{bclient} | @code{calibrate} | @code{kernel} | @code{mode7} | @code{monitor} | @code{ntp} | @code{stats} | @code{unpeer_crypto_early} | @code{unpeer_crypto_nak_early} | @code{unpeer_digest_early}]}
@item @code{disable} @code{[@code{auth} | @code{bclient} | @code{calibrate} | @code{kernel} | @code{mode7} | @code{monitor} | @code{ntp} | @code{stats} | @code{unpeer_crypto_early} | @code{unpeer_crypto_nak_early} | @code{unpeer_digest_early}]}
Provides a way to enable or disable various server options.
message class may also be followed by the
@code{all}
keyword to enable/disable all
-messages of the respective message class.Thus, a minimal log configuration
+messages of the respective message class.
+Thus, a minimal log configuration
could look like this:
@verbatim
logconfig =syncstatus +sysevents
be used instead of the default system
@code{syslog(3)}
facility.
-This is the same operation as the -l command line option.
+This is the same operation as the
+@code{-l}
+command line option.
@item @code{setvar} @kbd{variable} @code{[@code{default}]}
This command adds an additional system variable.
These
function.
Defaults to 50 4k pages (200 4k pages in OpenBSD).
@item @code{filenum} @kbd{Nfiledescriptors}
-Specifies the maximum number of file descriptors ntpd may have open at once. Defaults to the system default.
+Specifies the maximum number of file descriptors ntpd may have open at once.
+Defaults to the system default.
@end table
@item @code{trap} @kbd{host_address} @code{[@code{port} @kbd{port_number}]} @code{[@code{interface} @kbd{interface_address}]}
This command configures a trap receiver at the given host
#
# EDIT THIS FILE WITH CAUTION (invoke-ntp.keys.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:04:11 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:58:39 AM by AutoGen 5.18.5
# From the definitions ntp.keys.def
# and the template file agtexi-file.tpl
@end ignore
#
# EDIT THIS FILE WITH CAUTION (invoke-ntpd.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:04:13 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:58:41 AM by AutoGen 5.18.5
# From the definitions ntpd-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntpd - NTP daemon program - Ver. 4.3.91
+ntpd - NTP daemon program - Ver. 4.3.92
Usage: ntpd [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... \
[ <server1> ... <serverN> ]
Flg Arg Option-Name Description
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp.conf 5man "24 Jan 2016" "4.3.91" "File Formats"
+.TH ntp.conf 5man "27 Apr 2016" "4.3.92" "File Formats"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-sdaqBh/ag-FdaiAh)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-GSaioH/ag-SSaanH)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:03:54 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:23 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agman-cmd.tpl
.SH NAME
If the Basic Socket Interface Extensions for IPv6 (RFC-2553)
is detected, support for the IPv6 address family is generated
in addition to the default support of the IPv4 address family.
-In a few cases, including the reslist billboard generated
-by ntpdc, IPv6 addresses are automatically generated.
+In a few cases, including the
+\f\*[B-Font]reslist\f[]
+billboard generated
+by
+\fCntpq\f[]\fR(1ntpqmdoc)\f[]
+or
+\fCntpdc\f[]\fR(1ntpdcmdoc)\f[],
+IPv6 addresses are automatically generated.
IPv6 addresses can be identified by the presence of colons
\*[Lq]\&:\*[Rq]
in the address field.
.TP 7
.NOP \f\*[B-Font]pool\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]burst\f[]] [\f\*[B-Font]iburst\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]]
.TP 7
-.NOP \f\*[B-Font]server\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]burst\f[]] [\f\*[B-Font]iburst\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]]
+.NOP \f\*[B-Font]server\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]burst\f[]] [\f\*[B-Font]iburst\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]] [\f\*[B-Font]true\f[]]
.TP 7
-.NOP \f\*[B-Font]peer\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]]
+.NOP \f\*[B-Font]peer\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]] [\f\*[B-Font]true\f[]] [\f\*[B-Font]xleave\f[]]
.TP 7
-.NOP \f\*[B-Font]broadcast\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]ttl\f[] \f\*[I-Font]ttl\f[]]
+.NOP \f\*[B-Font]broadcast\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]ttl\f[] \f\*[I-Font]ttl\f[]] [\f\*[B-Font]xleave\f[]]
.TP 7
.NOP \f\*[B-Font]manycastclient\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]] [\f\*[B-Font]ttl\f[] \f\*[I-Font]ttl\f[]]
.PP
instead of the usual one.
The packet spacing is normally 2 s;
however, the spacing between the first and second packets
-can be changed with the calldelay command to allow
+can be changed with the
+\f\*[B-Font]calldelay\f[]
+command to allow
additional time for a modem or ISDN call to complete.
This is designed to improve timekeeping quality
with the
instead of the usual one.
The packet spacing is normally 2 s;
however, the spacing between the first two packets can be
-changed with the calldelay command to allow
+changed with the
+\f\*[B-Font]calldelay\f[]
+command to allow
additional time for a modem or ISDN call to complete.
This is designed to speed the initial synchronization
acquisition with the
Marks the server as unused, except for display purposes.
The server is discarded by the selection algroithm.
.TP 7
+.NOP \f\*[B-Font]preempt\f[]
+Says the association can be preempted.
+.TP 7
+.NOP \f\*[B-Font]true\f[]
+Marks the server as a truechimer.
+Use this option only for testing.
+.TP 7
.NOP \f\*[B-Font]prefer\f[]
Marks the server as preferred.
All other things being equal,
\fI/usr/share/doc/ntp\f[])
for further information.
.TP 7
+.NOP \f\*[B-Font]true\f[]
+Forces the association to always survive the selection and clustering algorithms.
+This option should almost certainly
+\fIonly\f[]
+be used while testing an association.
+.TP 7
.NOP \f\*[B-Font]ttl\f[] \f\*[I-Font]ttl\f[]
This option is used only with broadcast server and manycast
client modes.
packets.
Versions 1-4 are the choices, with version 4 the
default.
+.TP 7
+.NOP \f\*[B-Font]xleave\f[]
+Valid in
+\f\*[B-Font]peer\f[]
+and
+\f\*[B-Font]broadcast\f[]
+modes only, this flag enables interleave mode.
.PP
.SS Auxiliary Commands
.TP 7
commands and also by remote
configuration commands sent by a
\fCntpdc\f[]\fR(1ntpdcmdoc)\f[]
-program running in
+program running on
another machine.
If this flag is enabled, which is the default
case, new broadcast client and symmetric passive associations and
all of which are bound together by the protocol specifically
to deflect masquerade attacks.
For this reason Autokey
-includes the source and destinatino IP addresses in message digest
+includes the source and destination IP addresses in message digest
computations and so the same addresses must be available
at both the server and client.
For this reason operation
in the keys directory.
.TP 7
.NOP \f\*[B-Font]iffpar\f[] \f\*[I-Font]file\f[]
-Specifies the location of the optional IFF parameters file.This
-overrides the link
+Specifies the location of the optional IFF parameters file.
+This overrides the link
\fIntpkey_iff_\f[]\f\*[I-Font]hostname\f[]
in the keys directory.
.TP 7
.TP 7
.NOP \f\*[B-Font]mvpar\f[] \f\*[I-Font]file\f[]
Specifies the location of the optional MV parameters file.
-This
-overrides the link
+This overrides the link
\fIntpkey_mv_\f[]\f\*[I-Font]hostname\f[]
in the keys directory.
.TP 7
Statistic files are managed using file generation sets
and scripts in the
\fI./scripts\f[]
-directory of this distribution.
+directory of the source code distribution.
Using
these facilities and
UNIX
the number of links of this file is one, it is renamed appending a
dot, the letter
\f\*[B-Font]C\f[],
-and the pid of the ntpd server process.
+and the pid of the
+\fCntpd\f[]\fR(1ntpdmdoc)\f[]
+server process.
When the
number of links is greater than one, the file is unlinked.
This
.ne 2
Clients can be denied service because they are explicitly
-included in the restrict list created by the restrict command
+included in the restrict list created by the
+\f\*[B-Font]restrict\f[]
+command
or implicitly as the result of cryptographic or rate limit
violations.
Cryptographic violations include certificate
Some violations cause denied service
only for the offending packet, others cause denied service
for a timed period and others cause the denied service for
-an indefinate period.
+an indefinite period.
When a client or network is denied access
-for an indefinate period, the only way at present to remove
+for an indefinite period, the only way at present to remove
the restrictions is by restarting the server.
.SS The Kiss-of-Death Packet
Ordinarily, packets denied service are simply dropped with no
and a kiss-o'-death packet returned if enabled.
The default
minimum average and minimum are 5 and 2, respectively.
-The monitor subcommand specifies the probability of discard
+The
+\f\*[B-Font]monitor\f[]
+subcommand specifies the probability of discard
for packets that overflow the rate-control window.
.TP 7
.NOP \f\*[B-Font]restrict\f[] \f\*[B-Font]address\f[] [\f\*[B-Font]mask\f[] \f\*[I-Font]mask\f[]] [\f\*[I-Font]flag\f[] \f\*[I-Font]...\f[]]
.TP 7
.NOP \f\*[B-Font]limited\f[]
Deny service if the packet spacing violates the lower limits specified
-in the discard command.
+in the
+\f\*[B-Font]discard\f[]
+command.
A history of clients is kept using the
monitoring capability of
\fCntpd\f[]\fR(1ntpdmdoc)\f[].
.NOP \f\*[B-Font]notrap\f[]
Decline to provide mode 6 control message trap service to matching
hosts.
-The trap service is a subsystem of the ntpdq control message
+The trap service is a subsystem of the
+\fCntpq\f[]\fR(1ntpqmdoc)\f[]
+control message
protocol which is intended for use by remote event logging programs.
.TP 7
.NOP \f\*[B-Font]notrust\f[]
.ne 2
A persistent manycast client association is configured
-using the manycastclient command, which is similar to the
-server command but with a multicast (IPv4 class
+using the
+\f\*[B-Font]manycastclient\f[]
+command, which is similar to the
+\f\*[B-Font]server\f[]
+command but with a multicast (IPv4 class
\f\*[B-Font]D\f[]
or IPv6 prefix
\f\*[B-Font]FF\f[])
\f\*[B-Font]maxpolll\f[]
value specified in this command.
Initially, the TTL is
-set at the minimum hops specified by the ttl command.
+set at the minimum hops specified by the
+\f\*[B-Font]ttl\f[]
+command.
At each retransmission the TTL is increased until reaching
the maximum hops specified by this command or a sufficient
number client associations have been found.
.TP 7
.NOP \f\*[B-Font]dscp\f[] \f\*[I-Font]value\f[]
This option specifies the Differentiated Services Control Point (DSCP) value,
-a 6-bit code. The default value is 46, signifying Expedited Forwarding.
+a 6-bit code.
+The default value is 46, signifying Expedited Forwarding.
.TP 7
.NOP \f\*[B-Font]enable\f[] [\f\*[B-Font]auth\f[] | \f\*[B-Font]bclient\f[] | \f\*[B-Font]calibrate\f[] | \f\*[B-Font]kernel\f[] | \f\*[B-Font]mode7\f[] | \f\*[B-Font]monitor\f[] | \f\*[B-Font]ntp\f[] | \f\*[B-Font]stats\f[] | \f\*[B-Font]unpeer_crypto_early\f[] | \f\*[B-Font]unpeer_crypto_nak_early\f[] | \f\*[B-Font]unpeer_digest_early\f[]]
.TP 7
message class may also be followed by the
\f\*[B-Font]all\f[]
keyword to enable/disable all
-messages of the respective message class.Thus, a minimal log configuration
+messages of the respective message class.
+Thus, a minimal log configuration
could look like this:
.br
.in +4
be used instead of the default system
\fCsyslog\f[]\fR(3)\f[]
facility.
-This is the same operation as the \-l command line option.
+This is the same operation as the
+\f\*[B-Font]\-l\f[]
+command line option.
.TP 7
.NOP \f\*[B-Font]setvar\f[] \f\*[I-Font]variable\f[] [\f\*[B-Font]default\f[]]
This command adds an additional system variable.
Defaults to 50 4k pages (200 4k pages in OpenBSD).
.TP 7
.NOP \f\*[B-Font]filenum\f[] \f\*[I-Font]Nfiledescriptors\f[]
-Specifies the maximum number of file descriptors ntpd may have open at once. Defaults to the system default.
+Specifies the maximum number of file descriptors ntpd may have open at once.
+Defaults to the system default.
.RE
.TP 7
.NOP \f\*[B-Font]trap\f[] \f\*[I-Font]host_address\f[] [\f\*[B-Font]port\f[] \f\*[I-Font]port_number\f[]] [\f\*[B-Font]interface\f[] \f\*[I-Font]interface_address\f[]]
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTP_CONF 5mdoc File Formats
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:16 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:44 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
If the Basic Socket Interface Extensions for IPv6 (RFC\-2553)
is detected, support for the IPv6 address family is generated
in addition to the default support of the IPv4 address family.
-In a few cases, including the reslist billboard generated
-by ntpdc, IPv6 addresses are automatically generated.
+In a few cases, including the
+.Cm reslist
+billboard generated
+by
+.Xr ntpq 1ntpqmdoc
+or
+.Xr ntpdc 1ntpdcmdoc ,
+IPv6 addresses are automatically generated.
IPv6 addresses can be identified by the presence of colons
.Dq \&:
in the address field.
.Op Cm prefer
.Op Cm minpoll Ar minpoll
.Op Cm maxpoll Ar maxpoll
+.Op Cm true
.Xc
.It Xo Ic peer Ar address
.Op Cm key Ar key \&| Cm autokey
.Op Cm prefer
.Op Cm minpoll Ar minpoll
.Op Cm maxpoll Ar maxpoll
+.Op Cm true
+.Op Cm xleave
.Xc
.It Xo Ic broadcast Ar address
.Op Cm key Ar key \&| Cm autokey
.Op Cm prefer
.Op Cm minpoll Ar minpoll
.Op Cm ttl Ar ttl
+.Op Cm xleave
.Xc
.It Xo Ic manycastclient Ar address
.Op Cm key Ar key \&| Cm autokey
instead of the usual one.
The packet spacing is normally 2 s;
however, the spacing between the first and second packets
-can be changed with the calldelay command to allow
+can be changed with the
+.Ic calldelay
+command to allow
additional time for a modem or ISDN call to complete.
This is designed to improve timekeeping quality
with the
instead of the usual one.
The packet spacing is normally 2 s;
however, the spacing between the first two packets can be
-changed with the calldelay command to allow
+changed with the
+.Ic calldelay
+command to allow
additional time for a modem or ISDN call to complete.
This is designed to speed the initial synchronization
acquisition with the
.It Cm noselect
Marks the server as unused, except for display purposes.
The server is discarded by the selection algroithm.
+.It Cm preempt
+Says the association can be preempted.
+.It Cm true
+Marks the server as a truechimer.
+Use this option only for testing.
.It Cm prefer
Marks the server as preferred.
All other things being equal,
provided in
.Pa /usr/share/doc/ntp )
for further information.
+.It Cm true
+Forces the association to always survive the selection and clustering algorithms.
+This option should almost certainly
+.Em only
+be used while testing an association.
.It Cm ttl Ar ttl
This option is used only with broadcast server and manycast
client modes.
packets.
Versions 1\-4 are the choices, with version 4 the
default.
+.It Cm xleave
+Valid in
+.Cm peer
+and
+.Cm broadcast
+modes only, this flag enables interleave mode.
.El
.Ss Auxiliary Commands
.Bl -tag -width indent
commands and also by remote
configuration commands sent by a
.Xr ntpdc 1ntpdcmdoc
-program running in
+program running on
another machine.
If this flag is enabled, which is the default
case, new broadcast client and symmetric passive associations and
all of which are bound together by the protocol specifically
to deflect masquerade attacks.
For this reason Autokey
-includes the source and destinatino IP addresses in message digest
+includes the source and destination IP addresses in message digest
computations and so the same addresses must be available
at both the server and client.
For this reason operation
.Pa ntpkey_key_ Ns Ar hostname
in the keys directory.
.It Cm iffpar Ar file
-Specifies the location of the optional IFF parameters file.This
-overrides the link
+Specifies the location of the optional IFF parameters file.
+This overrides the link
.Pa ntpkey_iff_ Ns Ar hostname
in the keys directory.
.It Cm leap Ar file
in the keys directory.
.It Cm mvpar Ar file
Specifies the location of the optional MV parameters file.
-This
-overrides the link
+This overrides the link
.Pa ntpkey_mv_ Ns Ar hostname
in the keys directory.
.It Cm pw Ar password
Statistic files are managed using file generation sets
and scripts in the
.Pa ./scripts
-directory of this distribution.
+directory of the source code distribution.
Using
these facilities and
.Ux
the number of links of this file is one, it is renamed appending a
dot, the letter
.Cm C ,
-and the pid of the ntpd server process.
+and the pid of the
+.Xr ntpd 1ntpdmdoc
+server process.
When the
number of links is greater than one, the file is unlinked.
This
by a determined cracker.
.Pp
Clients can be denied service because they are explicitly
-included in the restrict list created by the restrict command
+included in the restrict list created by the
+.Ic restrict
+command
or implicitly as the result of cryptographic or rate limit
violations.
Cryptographic violations include certificate
Some violations cause denied service
only for the offending packet, others cause denied service
for a timed period and others cause the denied service for
-an indefinate period.
+an indefinite period.
When a client or network is denied access
-for an indefinate period, the only way at present to remove
+for an indefinite period, the only way at present to remove
the restrictions is by restarting the server.
.Ss The Kiss\-of\-Death Packet
Ordinarily, packets denied service are simply dropped with no
and a kiss\-o'\-death packet returned if enabled.
The default
minimum average and minimum are 5 and 2, respectively.
-The monitor subcommand specifies the probability of discard
+The
+.Ic monitor
+subcommand specifies the probability of discard
for packets that overflow the rate\-control window.
.It Xo Ic restrict address
.Op Cm mask Ar mask
last one, the packet is dropped.
.It Cm limited
Deny service if the packet spacing violates the lower limits specified
-in the discard command.
+in the
+.Ic discard
+command.
A history of clients is kept using the
monitoring capability of
.Xr ntpd 1ntpdmdoc .
.It Cm notrap
Decline to provide mode 6 control message trap service to matching
hosts.
-The trap service is a subsystem of the ntpdq control message
+The trap service is a subsystem of the
+.Xr ntpq 1ntpqmdoc
+control message
protocol which is intended for use by remote event logging programs.
.It Cm notrust
Deny service unless the packet is cryptographically authenticated.
as well and is highly recommended, especially for broadcast modes.
.Pp
A persistent manycast client association is configured
-using the manycastclient command, which is similar to the
-server command but with a multicast (IPv4 class
+using the
+.Ic manycastclient
+command, which is similar to the
+.Ic server
+command but with a multicast (IPv4 class
.Cm D
or IPv6 prefix
.Cm FF )
.Cm maxpolll
value specified in this command.
Initially, the TTL is
-set at the minimum hops specified by the ttl command.
+set at the minimum hops specified by the
+.Ic ttl
+command.
At each retransmission the TTL is increased until reaching
the maximum hops specified by this command or a sufficient
number client associations have been found.
otherwise, should be avoided.
.It Ic dscp Ar value
This option specifies the Differentiated Services Control Point (DSCP) value,
-a 6\-bit code. The default value is 46, signifying Expedited Forwarding.
+a 6\-bit code.
+The default value is 46, signifying Expedited Forwarding.
.It Xo Ic enable
.Oo
.Cm auth | Cm bclient |
message class may also be followed by the
.Cm all
keyword to enable/disable all
-messages of the respective message class.Thus, a minimal log configuration
+messages of the respective message class.
+Thus, a minimal log configuration
could look like this:
.Bd -literal
logconfig =syncstatus +sysevents
be used instead of the default system
.Xr syslog 3
facility.
-This is the same operation as the \-l command line option.
+This is the same operation as the
+.Fl l
+command line option.
.It Ic setvar Ar variable Op Cm default
This command adds an additional system variable.
These
function.
Defaults to 50 4k pages (200 4k pages in OpenBSD).
.It Cm filenum Ar Nfiledescriptors
-Specifies the maximum number of file descriptors ntpd may have open at once. Defaults to the system default.
+Specifies the maximum number of file descriptors ntpd may have open at once.
+Defaults to the system default.
.El
.It Xo Ic trap Ar host_address
.Op Cm port Ar port_number
<p>This document describes the configuration file for the NTP Project's
<code>ntpd</code> program.
- <p>This document applies to version 4.3.91 of <code>ntp.conf</code>.
+ <p>This document applies to version 4.3.92 of <code>ntp.conf</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp.conf 5 "24 Jan 2016" "4.3.91" "File Formats"
+.TH ntp.conf 5 "27 Apr 2016" "4.3.92" "File Formats"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-sdaqBh/ag-FdaiAh)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-GSaioH/ag-SSaanH)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:03:54 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:23 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agman-cmd.tpl
.SH NAME
If the Basic Socket Interface Extensions for IPv6 (RFC-2553)
is detected, support for the IPv6 address family is generated
in addition to the default support of the IPv4 address family.
-In a few cases, including the reslist billboard generated
-by ntpdc, IPv6 addresses are automatically generated.
+In a few cases, including the
+\f\*[B-Font]reslist\f[]
+billboard generated
+by
+\fCntpq\f[]\fR(@NTPQ_MS@)\f[]
+or
+\fCntpdc\f[]\fR(@NTPDC_MS@)\f[],
+IPv6 addresses are automatically generated.
IPv6 addresses can be identified by the presence of colons
\*[Lq]\&:\*[Rq]
in the address field.
.TP 7
.NOP \f\*[B-Font]pool\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]burst\f[]] [\f\*[B-Font]iburst\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]]
.TP 7
-.NOP \f\*[B-Font]server\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]burst\f[]] [\f\*[B-Font]iburst\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]]
+.NOP \f\*[B-Font]server\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]burst\f[]] [\f\*[B-Font]iburst\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]] [\f\*[B-Font]true\f[]]
.TP 7
-.NOP \f\*[B-Font]peer\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]]
+.NOP \f\*[B-Font]peer\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]] [\f\*[B-Font]true\f[]] [\f\*[B-Font]xleave\f[]]
.TP 7
-.NOP \f\*[B-Font]broadcast\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]ttl\f[] \f\*[I-Font]ttl\f[]]
+.NOP \f\*[B-Font]broadcast\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]ttl\f[] \f\*[I-Font]ttl\f[]] [\f\*[B-Font]xleave\f[]]
.TP 7
.NOP \f\*[B-Font]manycastclient\f[] \f\*[I-Font]address\f[] [\f\*[B-Font]key\f[] \f\*[I-Font]key\f[] \f\*[I-Font]\&|\f[] \f\*[B-Font]autokey\f[]] [\f\*[B-Font]version\f[] \f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]] [\f\*[B-Font]minpoll\f[] \f\*[I-Font]minpoll\f[]] [\f\*[B-Font]maxpoll\f[] \f\*[I-Font]maxpoll\f[]] [\f\*[B-Font]ttl\f[] \f\*[I-Font]ttl\f[]]
.PP
instead of the usual one.
The packet spacing is normally 2 s;
however, the spacing between the first and second packets
-can be changed with the calldelay command to allow
+can be changed with the
+\f\*[B-Font]calldelay\f[]
+command to allow
additional time for a modem or ISDN call to complete.
This is designed to improve timekeeping quality
with the
instead of the usual one.
The packet spacing is normally 2 s;
however, the spacing between the first two packets can be
-changed with the calldelay command to allow
+changed with the
+\f\*[B-Font]calldelay\f[]
+command to allow
additional time for a modem or ISDN call to complete.
This is designed to speed the initial synchronization
acquisition with the
Marks the server as unused, except for display purposes.
The server is discarded by the selection algroithm.
.TP 7
+.NOP \f\*[B-Font]preempt\f[]
+Says the association can be preempted.
+.TP 7
+.NOP \f\*[B-Font]true\f[]
+Marks the server as a truechimer.
+Use this option only for testing.
+.TP 7
.NOP \f\*[B-Font]prefer\f[]
Marks the server as preferred.
All other things being equal,
\fI/usr/share/doc/ntp\f[])
for further information.
.TP 7
+.NOP \f\*[B-Font]true\f[]
+Forces the association to always survive the selection and clustering algorithms.
+This option should almost certainly
+\fIonly\f[]
+be used while testing an association.
+.TP 7
.NOP \f\*[B-Font]ttl\f[] \f\*[I-Font]ttl\f[]
This option is used only with broadcast server and manycast
client modes.
packets.
Versions 1-4 are the choices, with version 4 the
default.
+.TP 7
+.NOP \f\*[B-Font]xleave\f[]
+Valid in
+\f\*[B-Font]peer\f[]
+and
+\f\*[B-Font]broadcast\f[]
+modes only, this flag enables interleave mode.
.PP
.SS Auxiliary Commands
.TP 7
commands and also by remote
configuration commands sent by a
\fCntpdc\f[]\fR(@NTPDC_MS@)\f[]
-program running in
+program running on
another machine.
If this flag is enabled, which is the default
case, new broadcast client and symmetric passive associations and
all of which are bound together by the protocol specifically
to deflect masquerade attacks.
For this reason Autokey
-includes the source and destinatino IP addresses in message digest
+includes the source and destination IP addresses in message digest
computations and so the same addresses must be available
at both the server and client.
For this reason operation
in the keys directory.
.TP 7
.NOP \f\*[B-Font]iffpar\f[] \f\*[I-Font]file\f[]
-Specifies the location of the optional IFF parameters file.This
-overrides the link
+Specifies the location of the optional IFF parameters file.
+This overrides the link
\fIntpkey_iff_\f[]\f\*[I-Font]hostname\f[]
in the keys directory.
.TP 7
.TP 7
.NOP \f\*[B-Font]mvpar\f[] \f\*[I-Font]file\f[]
Specifies the location of the optional MV parameters file.
-This
-overrides the link
+This overrides the link
\fIntpkey_mv_\f[]\f\*[I-Font]hostname\f[]
in the keys directory.
.TP 7
Statistic files are managed using file generation sets
and scripts in the
\fI./scripts\f[]
-directory of this distribution.
+directory of the source code distribution.
Using
these facilities and
UNIX
the number of links of this file is one, it is renamed appending a
dot, the letter
\f\*[B-Font]C\f[],
-and the pid of the ntpd server process.
+and the pid of the
+\fCntpd\f[]\fR(@NTPD_MS@)\f[]
+server process.
When the
number of links is greater than one, the file is unlinked.
This
.ne 2
Clients can be denied service because they are explicitly
-included in the restrict list created by the restrict command
+included in the restrict list created by the
+\f\*[B-Font]restrict\f[]
+command
or implicitly as the result of cryptographic or rate limit
violations.
Cryptographic violations include certificate
Some violations cause denied service
only for the offending packet, others cause denied service
for a timed period and others cause the denied service for
-an indefinate period.
+an indefinite period.
When a client or network is denied access
-for an indefinate period, the only way at present to remove
+for an indefinite period, the only way at present to remove
the restrictions is by restarting the server.
.SS The Kiss-of-Death Packet
Ordinarily, packets denied service are simply dropped with no
and a kiss-o'-death packet returned if enabled.
The default
minimum average and minimum are 5 and 2, respectively.
-The monitor subcommand specifies the probability of discard
+The
+\f\*[B-Font]monitor\f[]
+subcommand specifies the probability of discard
for packets that overflow the rate-control window.
.TP 7
.NOP \f\*[B-Font]restrict\f[] \f\*[B-Font]address\f[] [\f\*[B-Font]mask\f[] \f\*[I-Font]mask\f[]] [\f\*[I-Font]flag\f[] \f\*[I-Font]...\f[]]
.TP 7
.NOP \f\*[B-Font]limited\f[]
Deny service if the packet spacing violates the lower limits specified
-in the discard command.
+in the
+\f\*[B-Font]discard\f[]
+command.
A history of clients is kept using the
monitoring capability of
\fCntpd\f[]\fR(@NTPD_MS@)\f[].
.NOP \f\*[B-Font]notrap\f[]
Decline to provide mode 6 control message trap service to matching
hosts.
-The trap service is a subsystem of the ntpdq control message
+The trap service is a subsystem of the
+\fCntpq\f[]\fR(@NTPQ_MS@)\f[]
+control message
protocol which is intended for use by remote event logging programs.
.TP 7
.NOP \f\*[B-Font]notrust\f[]
.ne 2
A persistent manycast client association is configured
-using the manycastclient command, which is similar to the
-server command but with a multicast (IPv4 class
+using the
+\f\*[B-Font]manycastclient\f[]
+command, which is similar to the
+\f\*[B-Font]server\f[]
+command but with a multicast (IPv4 class
\f\*[B-Font]D\f[]
or IPv6 prefix
\f\*[B-Font]FF\f[])
\f\*[B-Font]maxpolll\f[]
value specified in this command.
Initially, the TTL is
-set at the minimum hops specified by the ttl command.
+set at the minimum hops specified by the
+\f\*[B-Font]ttl\f[]
+command.
At each retransmission the TTL is increased until reaching
the maximum hops specified by this command or a sufficient
number client associations have been found.
.TP 7
.NOP \f\*[B-Font]dscp\f[] \f\*[I-Font]value\f[]
This option specifies the Differentiated Services Control Point (DSCP) value,
-a 6-bit code. The default value is 46, signifying Expedited Forwarding.
+a 6-bit code.
+The default value is 46, signifying Expedited Forwarding.
.TP 7
.NOP \f\*[B-Font]enable\f[] [\f\*[B-Font]auth\f[] | \f\*[B-Font]bclient\f[] | \f\*[B-Font]calibrate\f[] | \f\*[B-Font]kernel\f[] | \f\*[B-Font]mode7\f[] | \f\*[B-Font]monitor\f[] | \f\*[B-Font]ntp\f[] | \f\*[B-Font]stats\f[] | \f\*[B-Font]unpeer_crypto_early\f[] | \f\*[B-Font]unpeer_crypto_nak_early\f[] | \f\*[B-Font]unpeer_digest_early\f[]]
.TP 7
message class may also be followed by the
\f\*[B-Font]all\f[]
keyword to enable/disable all
-messages of the respective message class.Thus, a minimal log configuration
+messages of the respective message class.
+Thus, a minimal log configuration
could look like this:
.br
.in +4
be used instead of the default system
\fCsyslog\f[]\fR(3)\f[]
facility.
-This is the same operation as the \-l command line option.
+This is the same operation as the
+\f\*[B-Font]\-l\f[]
+command line option.
.TP 7
.NOP \f\*[B-Font]setvar\f[] \f\*[I-Font]variable\f[] [\f\*[B-Font]default\f[]]
This command adds an additional system variable.
Defaults to 50 4k pages (200 4k pages in OpenBSD).
.TP 7
.NOP \f\*[B-Font]filenum\f[] \f\*[I-Font]Nfiledescriptors\f[]
-Specifies the maximum number of file descriptors ntpd may have open at once. Defaults to the system default.
+Specifies the maximum number of file descriptors ntpd may have open at once.
+Defaults to the system default.
.RE
.TP 7
.NOP \f\*[B-Font]trap\f[] \f\*[I-Font]host_address\f[] [\f\*[B-Font]port\f[] \f\*[I-Font]port_number\f[]] [\f\*[B-Font]interface\f[] \f\*[I-Font]interface_address\f[]]
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTP_CONF 5 File Formats
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:16 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:44 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
If the Basic Socket Interface Extensions for IPv6 (RFC\-2553)
is detected, support for the IPv6 address family is generated
in addition to the default support of the IPv4 address family.
-In a few cases, including the reslist billboard generated
-by ntpdc, IPv6 addresses are automatically generated.
+In a few cases, including the
+.Cm reslist
+billboard generated
+by
+.Xr ntpq @NTPQ_MS@
+or
+.Xr ntpdc @NTPDC_MS@ ,
+IPv6 addresses are automatically generated.
IPv6 addresses can be identified by the presence of colons
.Dq \&:
in the address field.
.Op Cm prefer
.Op Cm minpoll Ar minpoll
.Op Cm maxpoll Ar maxpoll
+.Op Cm true
.Xc
.It Xo Ic peer Ar address
.Op Cm key Ar key \&| Cm autokey
.Op Cm prefer
.Op Cm minpoll Ar minpoll
.Op Cm maxpoll Ar maxpoll
+.Op Cm true
+.Op Cm xleave
.Xc
.It Xo Ic broadcast Ar address
.Op Cm key Ar key \&| Cm autokey
.Op Cm prefer
.Op Cm minpoll Ar minpoll
.Op Cm ttl Ar ttl
+.Op Cm xleave
.Xc
.It Xo Ic manycastclient Ar address
.Op Cm key Ar key \&| Cm autokey
instead of the usual one.
The packet spacing is normally 2 s;
however, the spacing between the first and second packets
-can be changed with the calldelay command to allow
+can be changed with the
+.Ic calldelay
+command to allow
additional time for a modem or ISDN call to complete.
This is designed to improve timekeeping quality
with the
instead of the usual one.
The packet spacing is normally 2 s;
however, the spacing between the first two packets can be
-changed with the calldelay command to allow
+changed with the
+.Ic calldelay
+command to allow
additional time for a modem or ISDN call to complete.
This is designed to speed the initial synchronization
acquisition with the
.It Cm noselect
Marks the server as unused, except for display purposes.
The server is discarded by the selection algroithm.
+.It Cm preempt
+Says the association can be preempted.
+.It Cm true
+Marks the server as a truechimer.
+Use this option only for testing.
.It Cm prefer
Marks the server as preferred.
All other things being equal,
provided in
.Pa /usr/share/doc/ntp )
for further information.
+.It Cm true
+Forces the association to always survive the selection and clustering algorithms.
+This option should almost certainly
+.Em only
+be used while testing an association.
.It Cm ttl Ar ttl
This option is used only with broadcast server and manycast
client modes.
packets.
Versions 1\-4 are the choices, with version 4 the
default.
+.It Cm xleave
+Valid in
+.Cm peer
+and
+.Cm broadcast
+modes only, this flag enables interleave mode.
.El
.Ss Auxiliary Commands
.Bl -tag -width indent
commands and also by remote
configuration commands sent by a
.Xr ntpdc @NTPDC_MS@
-program running in
+program running on
another machine.
If this flag is enabled, which is the default
case, new broadcast client and symmetric passive associations and
all of which are bound together by the protocol specifically
to deflect masquerade attacks.
For this reason Autokey
-includes the source and destinatino IP addresses in message digest
+includes the source and destination IP addresses in message digest
computations and so the same addresses must be available
at both the server and client.
For this reason operation
.Pa ntpkey_key_ Ns Ar hostname
in the keys directory.
.It Cm iffpar Ar file
-Specifies the location of the optional IFF parameters file.This
-overrides the link
+Specifies the location of the optional IFF parameters file.
+This overrides the link
.Pa ntpkey_iff_ Ns Ar hostname
in the keys directory.
.It Cm leap Ar file
in the keys directory.
.It Cm mvpar Ar file
Specifies the location of the optional MV parameters file.
-This
-overrides the link
+This overrides the link
.Pa ntpkey_mv_ Ns Ar hostname
in the keys directory.
.It Cm pw Ar password
Statistic files are managed using file generation sets
and scripts in the
.Pa ./scripts
-directory of this distribution.
+directory of the source code distribution.
Using
these facilities and
.Ux
the number of links of this file is one, it is renamed appending a
dot, the letter
.Cm C ,
-and the pid of the ntpd server process.
+and the pid of the
+.Xr ntpd @NTPD_MS@
+server process.
When the
number of links is greater than one, the file is unlinked.
This
by a determined cracker.
.Pp
Clients can be denied service because they are explicitly
-included in the restrict list created by the restrict command
+included in the restrict list created by the
+.Ic restrict
+command
or implicitly as the result of cryptographic or rate limit
violations.
Cryptographic violations include certificate
Some violations cause denied service
only for the offending packet, others cause denied service
for a timed period and others cause the denied service for
-an indefinate period.
+an indefinite period.
When a client or network is denied access
-for an indefinate period, the only way at present to remove
+for an indefinite period, the only way at present to remove
the restrictions is by restarting the server.
.Ss The Kiss\-of\-Death Packet
Ordinarily, packets denied service are simply dropped with no
and a kiss\-o'\-death packet returned if enabled.
The default
minimum average and minimum are 5 and 2, respectively.
-The monitor subcommand specifies the probability of discard
+The
+.Ic monitor
+subcommand specifies the probability of discard
for packets that overflow the rate\-control window.
.It Xo Ic restrict address
.Op Cm mask Ar mask
last one, the packet is dropped.
.It Cm limited
Deny service if the packet spacing violates the lower limits specified
-in the discard command.
+in the
+.Ic discard
+command.
A history of clients is kept using the
monitoring capability of
.Xr ntpd @NTPD_MS@ .
.It Cm notrap
Decline to provide mode 6 control message trap service to matching
hosts.
-The trap service is a subsystem of the ntpdq control message
+The trap service is a subsystem of the
+.Xr ntpq @NTPQ_MS@
+control message
protocol which is intended for use by remote event logging programs.
.It Cm notrust
Deny service unless the packet is cryptographically authenticated.
as well and is highly recommended, especially for broadcast modes.
.Pp
A persistent manycast client association is configured
-using the manycastclient command, which is similar to the
-server command but with a multicast (IPv4 class
+using the
+.Ic manycastclient
+command, which is similar to the
+.Ic server
+command but with a multicast (IPv4 class
.Cm D
or IPv6 prefix
.Cm FF )
.Cm maxpolll
value specified in this command.
Initially, the TTL is
-set at the minimum hops specified by the ttl command.
+set at the minimum hops specified by the
+.Ic ttl
+command.
At each retransmission the TTL is increased until reaching
the maximum hops specified by this command or a sufficient
number client associations have been found.
otherwise, should be avoided.
.It Ic dscp Ar value
This option specifies the Differentiated Services Control Point (DSCP) value,
-a 6\-bit code. The default value is 46, signifying Expedited Forwarding.
+a 6\-bit code.
+The default value is 46, signifying Expedited Forwarding.
.It Xo Ic enable
.Oo
.Cm auth | Cm bclient |
message class may also be followed by the
.Cm all
keyword to enable/disable all
-messages of the respective message class.Thus, a minimal log configuration
+messages of the respective message class.
+Thus, a minimal log configuration
could look like this:
.Bd -literal
logconfig =syncstatus +sysevents
be used instead of the default system
.Xr syslog 3
facility.
-This is the same operation as the \-l command line option.
+This is the same operation as the
+.Fl l
+command line option.
.It Ic setvar Ar variable Op Cm default
This command adds an additional system variable.
These
function.
Defaults to 50 4k pages (200 4k pages in OpenBSD).
.It Cm filenum Ar Nfiledescriptors
-Specifies the maximum number of file descriptors ntpd may have open at once. Defaults to the system default.
+Specifies the maximum number of file descriptors ntpd may have open at once.
+Defaults to the system default.
.El
.It Xo Ic trap Ar host_address
.Op Cm port Ar port_number
-.TH ntp.keys 5man "24 Jan 2016" "4.3.91" "File Formats"
+.TH ntp.keys 5man "27 Apr 2016" "4.3.92" "File Formats"
.\"
.\" EDIT THIS FILE WITH CAUTION (ntp.man)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:00 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:28 AM by AutoGen 5.18.5
.\" From the definitions ntp.keys.def
.\" and the template file agman-file.tpl
.Sh NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTP_KEYS 5mdoc File Formats
.Os SunOS 5.10
.\" EDIT THIS FILE WITH CAUTION (ntp.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:19 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:47 AM by AutoGen 5.18.5
.\" From the definitions ntp.keys.def
.\" and the template file agmdoc-file.tpl
.Sh NAME
<p>This document describes the symmetric key file for the NTP Project's
<code>ntpd</code> program.
- <p>This document applies to version 4.3.91 of <code>ntp.keys</code>.
+ <p>This document applies to version 4.3.92 of <code>ntp.keys</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
-.TH ntp.keys 5 "24 Jan 2016" "4.3.91" "File Formats"
+.TH ntp.keys 5 "27 Apr 2016" "4.3.92" "File Formats"
.\"
.\" EDIT THIS FILE WITH CAUTION (ntp.man)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:00 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:28 AM by AutoGen 5.18.5
.\" From the definitions ntp.keys.def
.\" and the template file agman-file.tpl
.Sh NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTP_KEYS 5 File Formats
.Os SunOS 5.10
.\" EDIT THIS FILE WITH CAUTION (ntp.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:19 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:47 AM by AutoGen 5.18.5
.\" From the definitions ntp.keys.def
.\" and the template file agmdoc-file.tpl
.Sh NAME
/*
* EDIT THIS FILE WITH CAUTION (ntpd-opts.c)
*
- * It has been AutoGen-ed January 24, 2016 at 12:01:51 PM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 11:56:23 AM by AutoGen 5.18.5
* From the definitions ntpd-opts.def
* and the template file options
*
* static const strings for ntpd options
*/
static char const ntpd_opt_strs[3126] =
-/* 0 */ "ntpd 4.3.91\n"
+/* 0 */ "ntpd 4.3.92\n"
"Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
/* 2899 */ "output version information and exit\0"
/* 2935 */ "version\0"
/* 2943 */ "NTPD\0"
-/* 2948 */ "ntpd - NTP daemon program - Ver. 4.3.91\n"
+/* 2948 */ "ntpd - NTP daemon program - Ver. 4.3.92\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \\\n"
"\t\t[ <server1> ... <serverN> ]\n\0"
/* 3078 */ "http://bugs.ntp.org, bugs@ntp.org\0"
/* 3112 */ "\n\0"
-/* 3114 */ "ntpd 4.3.91";
+/* 3114 */ "ntpd 4.3.92";
/**
* ipv4 option description with
translate option names.
*/
/* referenced via ntpdOptions.pzCopyright */
- puts(_("ntpd 4.3.91\n\
+ puts(_("ntpd 4.3.92\n\
Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("output version information and exit"));
/* referenced via ntpdOptions.pzUsageTitle */
- puts(_("ntpd - NTP daemon program - Ver. 4.3.91\n\
+ puts(_("ntpd - NTP daemon program - Ver. 4.3.92\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \\\n\
\t\t[ <server1> ... <serverN> ]\n"));
puts(_("\n"));
/* referenced via ntpdOptions.pzFullVersion */
- puts(_("ntpd 4.3.91"));
+ puts(_("ntpd 4.3.92"));
/* referenced via ntpdOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (ntpd-opts.h)
*
- * It has been AutoGen-ed January 24, 2016 at 12:01:50 PM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 11:56:22 AM by AutoGen 5.18.5
* From the definitions ntpd-opts.def
* and the template file options
*
/** count of all options for ntpd */
#define OPTION_CT 38
/** ntpd version */
-#define NTPD_VERSION "4.3.91"
+#define NTPD_VERSION "4.3.92"
/** Full ntpd version text */
-#define NTPD_FULL_VERSION "ntpd 4.3.91"
+#define NTPD_FULL_VERSION "ntpd 4.3.92"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpd 1ntpdman "24 Jan 2016" "4.3.91" "User Commands"
+.TH ntpd 1ntpdman "27 Apr 2016" "4.3.92" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-FEaOUi/ag-SEaGTi)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-SWaGHI/ag-4WayGI)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:04 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:31 AM by AutoGen 5.18.5
.\" From the definitions ntpd-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPD 1ntpdmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpd-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:21 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:49 AM by AutoGen 5.18.5
.\" From the definitions ntpd-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
symmetric and broadcast modes, and with both symmetric-key and public-key
cryptography.
- <p>This document applies to version 4.3.91 of <code>ntpd</code>.
+ <p>This document applies to version 4.3.92 of <code>ntpd</code>.
<ul class="menu">
<li><a accesskey="1" href="#ntpd-Description">ntpd Description</a>: Description
used to select the program, defaulting to <span class="file">more</span>. Both will exit
with a status code of 0.
-<pre class="example">ntpd - NTP daemon program - Ver. 4.3.90
+<pre class="example">ntpd - NTP daemon program - Ver. 4.3.91
Usage: ntpd [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \
[ <server1> ... <serverN> ]
Flg Arg Option-Name Description
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpd @NTPD_MS@ "24 Jan 2016" "4.3.91" "User Commands"
+.TH ntpd @NTPD_MS@ "27 Apr 2016" "4.3.92" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-FEaOUi/ag-SEaGTi)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-SWaGHI/ag-4WayGI)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:04 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:31 AM by AutoGen 5.18.5
.\" From the definitions ntpd-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPD @NTPD_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpd-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:21 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:58:49 AM by AutoGen 5.18.5
.\" From the definitions ntpd-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntpdc.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:04:46 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:59:13 AM by AutoGen 5.18.5
# From the definitions ntpdc-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntpdc - vendor-specific NTPD control program - Ver. 4.3.91
+ntpdc - vendor-specific NTPD control program - Ver. 4.3.92
Usage: ntpdc [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [ host ...]
Flg Arg Option-Name Description
-4 no ipv4 Force IPv4 DNS name resolution
/*
* EDIT THIS FILE WITH CAUTION (ntpdc-opts.c)
*
- * It has been AutoGen-ed January 24, 2016 at 12:04:32 PM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 11:58:58 AM by AutoGen 5.18.5
* From the definitions ntpdc-opts.def
* and the template file options
*
* static const strings for ntpdc options
*/
static char const ntpdc_opt_strs[1908] =
-/* 0 */ "ntpdc 4.3.91\n"
+/* 0 */ "ntpdc 4.3.92\n"
"Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
/* 1693 */ "no-load-opts\0"
/* 1706 */ "no\0"
/* 1709 */ "NTPDC\0"
-/* 1715 */ "ntpdc - vendor-specific NTPD control program - Ver. 4.3.91\n"
+/* 1715 */ "ntpdc - vendor-specific NTPD control program - Ver. 4.3.92\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]\n\0"
/* 1844 */ "$HOME\0"
/* 1850 */ ".\0"
/* 1852 */ ".ntprc\0"
/* 1859 */ "http://bugs.ntp.org, bugs@ntp.org\0"
/* 1893 */ "\n\0"
-/* 1895 */ "ntpdc 4.3.91";
+/* 1895 */ "ntpdc 4.3.92";
/**
* ipv4 option description with
translate option names.
*/
/* referenced via ntpdcOptions.pzCopyright */
- puts(_("ntpdc 4.3.91\n\
+ puts(_("ntpdc 4.3.92\n\
Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("load options from a config file"));
/* referenced via ntpdcOptions.pzUsageTitle */
- puts(_("ntpdc - vendor-specific NTPD control program - Ver. 4.3.91\n\
+ puts(_("ntpdc - vendor-specific NTPD control program - Ver. 4.3.92\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]\n"));
/* referenced via ntpdcOptions.pzExplain */
puts(_("\n"));
/* referenced via ntpdcOptions.pzFullVersion */
- puts(_("ntpdc 4.3.91"));
+ puts(_("ntpdc 4.3.92"));
/* referenced via ntpdcOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (ntpdc-opts.h)
*
- * It has been AutoGen-ed January 24, 2016 at 12:04:31 PM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 11:58:58 AM by AutoGen 5.18.5
* From the definitions ntpdc-opts.def
* and the template file options
*
/** count of all options for ntpdc */
#define OPTION_CT 15
/** ntpdc version */
-#define NTPDC_VERSION "4.3.91"
+#define NTPDC_VERSION "4.3.92"
/** Full ntpdc version text */
-#define NTPDC_FULL_VERSION "ntpdc 4.3.91"
+#define NTPDC_FULL_VERSION "ntpdc 4.3.92"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpdc 1ntpdcman "24 Jan 2016" "4.3.91" "User Commands"
+.TH ntpdc 1ntpdcman "27 Apr 2016" "4.3.92" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-P8aOKk/ag-18aGJk)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-djaixK/ag-pjaawK)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:42 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:59:09 AM by AutoGen 5.18.5
.\" From the definitions ntpdc-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPDC 1ntpdcmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpdc-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:49 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:59:16 AM by AutoGen 5.18.5
.\" From the definitions ntpdc-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
clock. Run as root, it can correct the system clock to this offset as
well. It can be run as an interactive command or from a cron job.
- <p>This document applies to version 4.3.91 of <code>ntpdc</code>.
+ <p>This document applies to version 4.3.92 of <code>ntpdc</code>.
<p>The program implements the SNTP protocol as defined by RFC 5905, the NTPv4
IETF specification.
used to select the program, defaulting to <span class="file">more</span>. Both will exit
with a status code of 0.
-<pre class="example">ntpdc - vendor-specific NTPD control program - Ver. 4.3.91
+<pre class="example">ntpdc - vendor-specific NTPD control program - Ver. 4.3.92
Usage: ntpdc [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]
Flg Arg Option-Name Description
-4 no ipv4 Force IPv4 DNS name resolution
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpdc @NTPDC_MS@ "24 Jan 2016" "4.3.91" "User Commands"
+.TH ntpdc @NTPDC_MS@ "27 Apr 2016" "4.3.92" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-P8aOKk/ag-18aGJk)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-djaixK/ag-pjaawK)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:42 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:59:09 AM by AutoGen 5.18.5
.\" From the definitions ntpdc-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPDC @NTPDC_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpdc-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:04:49 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:59:16 AM by AutoGen 5.18.5
.\" From the definitions ntpdc-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntpq.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:05:21 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:59:47 AM by AutoGen 5.18.5
# From the definitions ntpq-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
* ntpq numeric:: numeric option (-n)
* ntpq old-rv:: old-rv option
* ntpq peers:: peers option (-p)
+* ntpq refid:: refid option (-r)
* ntpq wide:: wide option (-w)
* ntpq config:: presetting/configuring ntpq
* ntpq exit status:: exit status
@exampleindent 0
@example
-ntpq - standard NTP query program - Ver. 4.3.91
+ntpq - standard NTP query program - Ver. 4.3.92
Usage: ntpq [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [ host ...]
Flg Arg Option-Name Description
-4 no ipv4 Force IPv4 DNS name resolution
no old-rv Always output status line with readvar
-p no peers Print a list of the peers
- prohibits the option 'interactive'
+ -r KWd refid Set default display type for S2+ refids
-w no wide Display the full 'remote' value
opt version output version information and exit
-? no help display extended usage information and exit
- reading file ./.ntprc
- examining environment variables named NTPQ_*
+The valid "refid" option keywords are:
+ hash ipv4
+ or an integer from 0 through 1
+
Please send bug reports to: <http://bugs.ntp.org, bugs@@ntp.org>
@end example
@exampleindent 4
Print a list of the peers known to the server as well as a summary
of their state. This is equivalent to the 'peers' interactive command.
+@node ntpq refid
+@subsection refid option (-r)
+@cindex ntpq-refid
+
+This is the ``set default display type for s2+ refids'' option.
+This option takes a keyword argument.
+
+@noindent
+This option has some usage constraints. It:
+@itemize @bullet
+@item
+This option takes a keyword as its argument.
+The argument sets an enumeration value that can be tested by comparing the option value macro (OPT_VALUE_REFID).
+The available keywords are:
+@example
+ hash ipv4
+@end example
+
+or their numeric equivalent.@end itemize
+
+Set the default display format for S2+ refids.
@node ntpq wide
@subsection wide option (-w)
@cindex ntpq-wide
/*
* EDIT THIS FILE WITH CAUTION (ntpq-opts.c)
*
- * It has been AutoGen-ed January 24, 2016 at 12:04:52 PM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 11:59:19 AM by AutoGen 5.18.5
* From the definitions ntpq-opts.def
* and the template file options
*
/**
* static const strings for ntpq options
*/
-static char const ntpq_opt_strs[1922] =
-/* 0 */ "ntpq 4.3.91\n"
+static char const ntpq_opt_strs[1979] =
+/* 0 */ "ntpq 4.3.92\n"
"Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
/* 1403 */ "Print a list of the peers\0"
/* 1429 */ "PEERS\0"
/* 1435 */ "peers\0"
-/* 1441 */ "Display the full 'remote' value\0"
-/* 1473 */ "WIDE\0"
-/* 1478 */ "wide\0"
-/* 1483 */ "display extended usage information and exit\0"
-/* 1527 */ "help\0"
-/* 1532 */ "extended usage information passed thru pager\0"
-/* 1577 */ "more-help\0"
-/* 1587 */ "output version information and exit\0"
-/* 1623 */ "version\0"
-/* 1631 */ "save the option state to a config file\0"
-/* 1670 */ "save-opts\0"
-/* 1680 */ "load options from a config file\0"
-/* 1712 */ "LOAD_OPTS\0"
-/* 1722 */ "no-load-opts\0"
-/* 1735 */ "no\0"
-/* 1738 */ "NTPQ\0"
-/* 1743 */ "ntpq - standard NTP query program - Ver. 4.3.91\n"
+/* 1441 */ "Set default display type for S2+ refids\0"
+/* 1481 */ "REFID\0"
+/* 1487 */ "refid\0"
+/* 1493 */ "Display the full 'remote' value\0"
+/* 1525 */ "WIDE\0"
+/* 1530 */ "wide\0"
+/* 1535 */ "display extended usage information and exit\0"
+/* 1579 */ "help\0"
+/* 1584 */ "extended usage information passed thru pager\0"
+/* 1629 */ "more-help\0"
+/* 1639 */ "output version information and exit\0"
+/* 1675 */ "version\0"
+/* 1683 */ "save the option state to a config file\0"
+/* 1722 */ "save-opts\0"
+/* 1732 */ "load options from a config file\0"
+/* 1764 */ "LOAD_OPTS\0"
+/* 1774 */ "no-load-opts\0"
+/* 1787 */ "no\0"
+/* 1790 */ "NTPQ\0"
+/* 1795 */ "ntpq - standard NTP query program - Ver. 4.3.92\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]\n\0"
-/* 1861 */ "$HOME\0"
-/* 1867 */ ".\0"
-/* 1869 */ ".ntprc\0"
-/* 1876 */ "http://bugs.ntp.org, bugs@ntp.org\0"
-/* 1910 */ "ntpq 4.3.91";
+/* 1913 */ "$HOME\0"
+/* 1919 */ ".\0"
+/* 1921 */ ".ntprc\0"
+/* 1928 */ "http://bugs.ntp.org, bugs@ntp.org\0"
+/* 1962 */ "ntpq 4.3.92\0"
+/* 1974 */ "hash";
/**
* ipv4 option description with
/** Compiled in flag settings for the peers option */
#define PEERS_FLAGS (OPTST_DISABLED)
+/**
+ * refid option description:
+ */
+/** Descriptive text for the refid option */
+#define REFID_DESC (ntpq_opt_strs+1441)
+/** Upper-cased name for the refid option */
+#define REFID_NAME (ntpq_opt_strs+1481)
+/** Name string for the refid option */
+#define REFID_name (ntpq_opt_strs+1487)
+/** The compiled in default value for the refid option argument */
+#define REFID_DFT_ARG ((char const*)REFID_IPV4)
+/** Compiled in flag settings for the refid option */
+#define REFID_FLAGS (OPTST_DISABLED \
+ | OPTST_SET_ARGTYPE(OPARG_TYPE_ENUMERATION))
+
/**
* wide option description:
*/
/** Descriptive text for the wide option */
-#define WIDE_DESC (ntpq_opt_strs+1441)
+#define WIDE_DESC (ntpq_opt_strs+1493)
/** Upper-cased name for the wide option */
-#define WIDE_NAME (ntpq_opt_strs+1473)
+#define WIDE_NAME (ntpq_opt_strs+1525)
/** Name string for the wide option */
-#define WIDE_name (ntpq_opt_strs+1478)
+#define WIDE_name (ntpq_opt_strs+1530)
/** Compiled in flag settings for the wide option */
#define WIDE_FLAGS (OPTST_DISABLED)
/*
* Help/More_Help/Version option descriptions:
*/
-#define HELP_DESC (ntpq_opt_strs+1483)
-#define HELP_name (ntpq_opt_strs+1527)
+#define HELP_DESC (ntpq_opt_strs+1535)
+#define HELP_name (ntpq_opt_strs+1579)
#ifdef HAVE_WORKING_FORK
-#define MORE_HELP_DESC (ntpq_opt_strs+1532)
-#define MORE_HELP_name (ntpq_opt_strs+1577)
+#define MORE_HELP_DESC (ntpq_opt_strs+1584)
+#define MORE_HELP_name (ntpq_opt_strs+1629)
#define MORE_HELP_FLAGS (OPTST_IMM | OPTST_NO_INIT)
#else
#define MORE_HELP_DESC HELP_DESC
# define VER_FLAGS (OPTST_SET_ARGTYPE(OPARG_TYPE_STRING) | \
OPTST_ARG_OPTIONAL | OPTST_IMM | OPTST_NO_INIT)
#endif
-#define VER_DESC (ntpq_opt_strs+1587)
-#define VER_name (ntpq_opt_strs+1623)
-#define SAVE_OPTS_DESC (ntpq_opt_strs+1631)
-#define SAVE_OPTS_name (ntpq_opt_strs+1670)
-#define LOAD_OPTS_DESC (ntpq_opt_strs+1680)
-#define LOAD_OPTS_NAME (ntpq_opt_strs+1712)
-#define NO_LOAD_OPTS_name (ntpq_opt_strs+1722)
-#define LOAD_OPTS_pfx (ntpq_opt_strs+1735)
+#define VER_DESC (ntpq_opt_strs+1639)
+#define VER_name (ntpq_opt_strs+1675)
+#define SAVE_OPTS_DESC (ntpq_opt_strs+1683)
+#define SAVE_OPTS_name (ntpq_opt_strs+1722)
+#define LOAD_OPTS_DESC (ntpq_opt_strs+1732)
+#define LOAD_OPTS_NAME (ntpq_opt_strs+1764)
+#define NO_LOAD_OPTS_name (ntpq_opt_strs+1774)
+#define LOAD_OPTS_pfx (ntpq_opt_strs+1787)
#define LOAD_OPTS_name (NO_LOAD_OPTS_name + 3)
/**
* Declare option callback procedures
optionResetOpt, optionStackArg, optionTimeDate,
optionTimeVal, optionUnstackArg, optionVendorOption;
static tOptProc
- doOptDebug_Level, doUsageOpt;
+ doOptDebug_Level, doOptRefid, doUsageOpt;
#define VER_PROC ntpOptionPrintVersion
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/* desc, NAME, name */ PEERS_DESC, PEERS_NAME, PEERS_name,
/* disablement strs */ NULL, NULL },
- { /* entry idx, value */ 9, VALUE_OPT_WIDE,
- /* equiv idx, value */ 9, VALUE_OPT_WIDE,
+ { /* entry idx, value */ 9, VALUE_OPT_REFID,
+ /* equiv idx, value */ 9, VALUE_OPT_REFID,
+ /* equivalenced to */ NO_EQUIVALENT,
+ /* min, max, act ct */ 0, 1, 0,
+ /* opt state flags */ REFID_FLAGS, 0,
+ /* last opt argumnt */ { REFID_DFT_ARG },
+ /* arg list/cookie */ NULL,
+ /* must/cannot opts */ NULL, NULL,
+ /* option proc */ doOptRefid,
+ /* desc, NAME, name */ REFID_DESC, REFID_NAME, REFID_name,
+ /* disablement strs */ NULL, NULL },
+
+ { /* entry idx, value */ 10, VALUE_OPT_WIDE,
+ /* equiv idx, value */ 10, VALUE_OPT_WIDE,
/* equivalenced to */ NO_EQUIVALENT,
/* min, max, act ct */ 0, 1, 0,
/* opt state flags */ WIDE_FLAGS, 0,
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/** Reference to the upper cased version of ntpq. */
-#define zPROGNAME (ntpq_opt_strs+1738)
+#define zPROGNAME (ntpq_opt_strs+1790)
/** Reference to the title line for ntpq usage. */
-#define zUsageTitle (ntpq_opt_strs+1743)
+#define zUsageTitle (ntpq_opt_strs+1795)
/** ntpq configuration file name. */
-#define zRcName (ntpq_opt_strs+1869)
+#define zRcName (ntpq_opt_strs+1921)
/** Directories to search for ntpq config files. */
static char const * const apzHomeList[3] = {
- ntpq_opt_strs+1861,
- ntpq_opt_strs+1867,
+ ntpq_opt_strs+1913,
+ ntpq_opt_strs+1919,
NULL };
/** The ntpq program bug email address. */
-#define zBugsAddr (ntpq_opt_strs+1876)
+#define zBugsAddr (ntpq_opt_strs+1928)
/** Clarification/explanation of what ntpq does. */
#define zExplain (NULL)
/** Extra detail explaining what ntpq does. */
#define zDetail (NULL)
/** The full version string for ntpq. */
-#define zFullVersion (ntpq_opt_strs+1910)
+#define zFullVersion (ntpq_opt_strs+1962)
/* extracted from optcode.tlib near line 364 */
#if defined(ENABLE_NLS)
(void)pOptDesc;
(void)pOptions;
}
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+/**
+ * Code to handle the refid option.
+ * Set the default display format for S2+ refids.
+ * @param[in] pOptions the ntpq options data structure
+ * @param[in,out] pOptDesc the option descriptor for this option.
+ */
+static void
+doOptRefid(tOptions* pOptions, tOptDesc* pOptDesc)
+{
+
+/* extracted from optmain.tlib near line 945 */
+ static char const * const names[2] = {
+ ntpq_opt_strs+1974, ntpq_opt_strs+1043 };
+
+ if (pOptions <= OPTPROC_EMIT_LIMIT) {
+ (void) optionEnumerationVal(pOptions, pOptDesc, names, 2);
+ return; /* protect AutoOpts client code from internal callbacks */
+ }
+
+ pOptDesc->optArg.argEnum =
+ optionEnumerationVal(pOptions, pOptDesc, names, 2);
+}
/* extracted from optmain.tlib near line 1250 */
/**
NO_EQUIVALENT, /* '-#' option index */
NO_EQUIVALENT /* index of default opt */
},
- 15 /* full option count */, 10 /* user option count */,
+ 16 /* full option count */, 11 /* user option count */,
ntpq_full_usage, ntpq_short_usage,
NULL, NULL,
PKGDATADIR, ntpq_packager_info
translate option names.
*/
/* referenced via ntpqOptions.pzCopyright */
- puts(_("ntpq 4.3.91\n\
+ puts(_("ntpq 4.3.92\n\
Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
/* referenced via ntpqOptions.pOptDesc->pzText */
puts(_("Print a list of the peers"));
+ /* referenced via ntpqOptions.pOptDesc->pzText */
+ puts(_("Set default display type for S2+ refids"));
+
/* referenced via ntpqOptions.pOptDesc->pzText */
puts(_("Display the full 'remote' value"));
puts(_("load options from a config file"));
/* referenced via ntpqOptions.pzUsageTitle */
- puts(_("ntpq - standard NTP query program - Ver. 4.3.91\n\
+ puts(_("ntpq - standard NTP query program - Ver. 4.3.92\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]\n"));
/* referenced via ntpqOptions.pzFullVersion */
- puts(_("ntpq 4.3.91"));
+ puts(_("ntpq 4.3.92"));
/* referenced via ntpqOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (ntpq-opts.h)
*
- * It has been AutoGen-ed January 24, 2016 at 12:04:52 PM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 11:59:19 AM by AutoGen 5.18.5
* From the definitions ntpq-opts.def
* and the template file options
*
INDEX_OPT_NUMERIC = 6,
INDEX_OPT_OLD_RV = 7,
INDEX_OPT_PEERS = 8,
- INDEX_OPT_WIDE = 9,
- INDEX_OPT_VERSION = 10,
- INDEX_OPT_HELP = 11,
- INDEX_OPT_MORE_HELP = 12,
- INDEX_OPT_SAVE_OPTS = 13,
- INDEX_OPT_LOAD_OPTS = 14
+ INDEX_OPT_REFID = 9,
+ INDEX_OPT_WIDE = 10,
+ INDEX_OPT_VERSION = 11,
+ INDEX_OPT_HELP = 12,
+ INDEX_OPT_MORE_HELP = 13,
+ INDEX_OPT_SAVE_OPTS = 14,
+ INDEX_OPT_LOAD_OPTS = 15
} teOptIndex;
/** count of all options for ntpq */
-#define OPTION_CT 15
+#define OPTION_CT 16
/** ntpq version */
-#define NTPQ_VERSION "4.3.91"
+#define NTPQ_VERSION "4.3.92"
/** Full ntpq version text */
-#define NTPQ_FULL_VERSION "ntpq 4.3.91"
+#define NTPQ_FULL_VERSION "ntpq 4.3.92"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
# warning undefining PEERS due to option name conflict
# undef PEERS
# endif
+# ifdef REFID
+# warning undefining REFID due to option name conflict
+# undef REFID
+# endif
# ifdef WIDE
# warning undefining WIDE due to option name conflict
# undef WIDE
# undef NUMERIC
# undef OLD_RV
# undef PEERS
+# undef REFID
# undef WIDE
#endif /* NO_OPTION_NAME_WARNINGS */
#define VALUE_OPT_NUMERIC 'n'
#define VALUE_OPT_OLD_RV 0x1001
#define VALUE_OPT_PEERS 'p'
+#define VALUE_OPT_REFID 'r'
+
+typedef enum {
+ REFID_HASH, REFID_IPV4
+} te_Refid;
+#define OPT_REFID_VAL2STR(_v) optionKeywordName(&DESC(REFID), (_v))
+#define OPT_VALUE_REFID (DESC(REFID).optArg.argEnum)
#define VALUE_OPT_WIDE 'w'
/** option flag (value) for help-value option */
#define VALUE_OPT_HELP '?'
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpq 1ntpqman "24 Jan 2016" "4.3.91" "User Commands"
+.TH ntpq 1ntpqman "27 Apr 2016" "4.3.92" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-9fayVl/ag-jgaqUl)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-fnayIL/ag-rnaqHL)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:05:16 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:59:42 AM by AutoGen 5.18.5
.\" From the definitions ntpq-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
Print a list of the peers known to the server as well as a summary
of their state. This is equivalent to the 'peers' interactive command.
.TP
+.NOP \f\*[B-Font]\-r\f[] \f\*[I-Font]keyword\f[], \f\*[B-Font]\-\-refid\f[]=\f\*[I-Font]keyword\f[]
+Set default display type for S2+ refids.
+This option takes a keyword as its argument. The argument sets an enumeration value that can
+be tested by comparing them against the option value macro.
+The available keywords are:
+.in +4
+.nf
+.na
+hash ipv4
+.fi
+or their numeric equivalent.
+.in -4
+.sp
+The default
+\f\*[I-Font]keyword\f[]
+for this option is:
+.ti +4
+ ipv4
+.sp
+Set the default display format for S2+ refids.
+.TP
.NOP \f\*[B-Font]\-w\f[], \f\*[B-Font]\-\-wide\f[]
Display the full 'remote' value.
.sp
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPQ 1ntpqmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpq-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:05:23 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:59:49 AM by AutoGen 5.18.5
.\" From the definitions ntpq-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
.sp
Print a list of the peers known to the server as well as a summary
of their state. This is equivalent to the 'peers' interactive command.
+.It Fl r Ar keyword , Fl \-refid Ns = Ns Ar keyword
+Set default display type for S2+ refids.
+This option takes a keyword as its argument. The argument sets an enumeration value that can
+be tested by comparing them against the option value macro.
+The available keywords are:
+.in +4
+.nf
+.na
+hash ipv4
+.fi
+or their numeric equivalent.
+.in -4
+.sp
+The default
+.Ar keyword
+for this option is:
+.ti +4
+ ipv4
+.sp
+Set the default display format for S2+ refids.
.It Fl w , Fl \-wide
Display the full 'remote' value.
.sp
and determine the performance of
<code>ntpd</code>, the NTP daemon.
- <p>This document applies to version 4.3.91 of <code>ntpq</code>.
+ <p>This document applies to version 4.3.92 of <code>ntpq</code>.
<ul class="menu">
<li><a accesskey="1" href="#ntpq-Description">ntpq Description</a>
used to select the program, defaulting to <span class="file">more</span>. Both will exit
with a status code of 0.
-<pre class="example">ntpq - standard NTP query program - Ver. 4.3.90
+<pre class="example">ntpq - standard NTP query program - Ver. 4.3.91
Usage: ntpq [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]
Flg Arg Option-Name Description
-4 no ipv4 Force IPv4 DNS name resolution
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpq @NTPQ_MS@ "24 Jan 2016" "4.3.91" "User Commands"
+.TH ntpq @NTPQ_MS@ "27 Apr 2016" "4.3.92" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-9fayVl/ag-jgaqUl)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-fnayIL/ag-rnaqHL)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:05:16 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:59:42 AM by AutoGen 5.18.5
.\" From the definitions ntpq-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
Print a list of the peers known to the server as well as a summary
of their state. This is equivalent to the 'peers' interactive command.
.TP
+.NOP \f\*[B-Font]\-r\f[] \f\*[I-Font]keyword\f[], \f\*[B-Font]\-\-refid\f[]=\f\*[I-Font]keyword\f[]
+Set default display type for S2+ refids.
+This option takes a keyword as its argument. The argument sets an enumeration value that can
+be tested by comparing them against the option value macro.
+The available keywords are:
+.in +4
+.nf
+.na
+hash ipv4
+.fi
+or their numeric equivalent.
+.in -4
+.sp
+The default
+\f\*[I-Font]keyword\f[]
+for this option is:
+.ti +4
+ ipv4
+.sp
+Set the default display format for S2+ refids.
+.TP
.NOP \f\*[B-Font]\-w\f[], \f\*[B-Font]\-\-wide\f[]
Display the full 'remote' value.
.sp
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPQ @NTPQ_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpq-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:05:23 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:59:49 AM by AutoGen 5.18.5
.\" From the definitions ntpq-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
.sp
Print a list of the peers known to the server as well as a summary
of their state. This is equivalent to the 'peers' interactive command.
+.It Fl r Ar keyword , Fl \-refid Ns = Ns Ar keyword
+Set default display type for S2+ refids.
+This option takes a keyword as its argument. The argument sets an enumeration value that can
+be tested by comparing them against the option value macro.
+The available keywords are:
+.in +4
+.nf
+.na
+hash ipv4
+.fi
+or their numeric equivalent.
+.in -4
+.sp
+The default
+.Ar keyword
+for this option is:
+.ti +4
+ ipv4
+.sp
+Set the default display format for S2+ refids.
.It Fl w , Fl \-wide
Display the full 'remote' value.
.sp
#
# EDIT THIS FILE WITH CAUTION (invoke-ntpsnmpd.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:05:37 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 12:00:03 PM by AutoGen 5.18.5
# From the definitions ntpsnmpd-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntpsnmpd - NTP SNMP MIB agent - Ver. 4.3.91
+ntpsnmpd - NTP SNMP MIB agent - Ver. 4.3.92
Usage: ntpsnmpd [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
Flg Arg Option-Name Description
-n no nofork Do not fork
/*
* EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.c)
*
- * It has been AutoGen-ed January 24, 2016 at 12:05:26 PM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 11:59:52 AM by AutoGen 5.18.5
* From the definitions ntpsnmpd-opts.def
* and the template file options
*
* static const strings for ntpsnmpd options
*/
static char const ntpsnmpd_opt_strs[1607] =
-/* 0 */ "ntpsnmpd 4.3.91\n"
+/* 0 */ "ntpsnmpd 4.3.92\n"
"Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
/* 1413 */ "no-load-opts\0"
/* 1426 */ "no\0"
/* 1429 */ "NTPSNMPD\0"
-/* 1438 */ "ntpsnmpd - NTP SNMP MIB agent - Ver. 4.3.91\n"
+/* 1438 */ "ntpsnmpd - NTP SNMP MIB agent - Ver. 4.3.92\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]...\n\0"
/* 1540 */ "$HOME\0"
/* 1546 */ ".\0"
/* 1548 */ ".ntprc\0"
/* 1555 */ "http://bugs.ntp.org, bugs@ntp.org\0"
/* 1589 */ "\n\0"
-/* 1591 */ "ntpsnmpd 4.3.91";
+/* 1591 */ "ntpsnmpd 4.3.92";
/**
* nofork option description:
translate option names.
*/
/* referenced via ntpsnmpdOptions.pzCopyright */
- puts(_("ntpsnmpd 4.3.91\n\
+ puts(_("ntpsnmpd 4.3.92\n\
Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("load options from a config file"));
/* referenced via ntpsnmpdOptions.pzUsageTitle */
- puts(_("ntpsnmpd - NTP SNMP MIB agent - Ver. 4.3.91\n\
+ puts(_("ntpsnmpd - NTP SNMP MIB agent - Ver. 4.3.92\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]...\n"));
/* referenced via ntpsnmpdOptions.pzExplain */
puts(_("\n"));
/* referenced via ntpsnmpdOptions.pzFullVersion */
- puts(_("ntpsnmpd 4.3.91"));
+ puts(_("ntpsnmpd 4.3.92"));
/* referenced via ntpsnmpdOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.h)
*
- * It has been AutoGen-ed January 24, 2016 at 12:05:26 PM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 11:59:51 AM by AutoGen 5.18.5
* From the definitions ntpsnmpd-opts.def
* and the template file options
*
/** count of all options for ntpsnmpd */
#define OPTION_CT 8
/** ntpsnmpd version */
-#define NTPSNMPD_VERSION "4.3.91"
+#define NTPSNMPD_VERSION "4.3.92"
/** Full ntpsnmpd version text */
-#define NTPSNMPD_FULL_VERSION "ntpsnmpd 4.3.91"
+#define NTPSNMPD_FULL_VERSION "ntpsnmpd 4.3.92"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpsnmpd 1ntpsnmpdman "24 Jan 2016" "4.3.91" "User Commands"
+.TH ntpsnmpd 1ntpsnmpdman "27 Apr 2016" "4.3.92" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-Hsay3m/ag-Tsaq2m)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-pmaOQM/ag-BmaGPM)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:05:33 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:59:59 AM by AutoGen 5.18.5
.\" From the definitions ntpsnmpd-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPSNMPD 1ntpsnmpdmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:05:39 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 12:00:05 PM by AutoGen 5.18.5
.\" From the definitions ntpsnmpd-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<p>The <code>ntpsnmpd</code> utility program is used to monitor NTP daemon <code>ntpd</code>
operations and determine performance. It uses the standard NTP mode 6 control
- <p>This document applies to version 4.3.91 of <code>ntpsnmpd</code>.
+ <p>This document applies to version 4.3.92 of <code>ntpsnmpd</code>.
<ul class="menu">
<li><a accesskey="1" href="#ntpsnmpd-Description">ntpsnmpd Description</a>: Description
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpsnmpd @NTPSNMPD_MS@ "24 Jan 2016" "4.3.91" "User Commands"
+.TH ntpsnmpd @NTPSNMPD_MS@ "27 Apr 2016" "4.3.92" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-Hsay3m/ag-Tsaq2m)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-pmaOQM/ag-BmaGPM)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:05:33 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:59:59 AM by AutoGen 5.18.5
.\" From the definitions ntpsnmpd-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPSNMPD @NTPSNMPD_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpsnmpd-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:05:39 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 12:00:05 PM by AutoGen 5.18.5
.\" From the definitions ntpsnmpd-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
# - Numeric values increment
# - empty 'increments' to 0 for dev, 1 for stable
# - NEW 'increments' to empty
-point=91
+point=92
### betapoint is normally modified by script.
# ntp-stable Beta number (betapoint)
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH calc_tickadj 1calc_tickadjman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH calc_tickadj 1calc_tickadjman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-iuaGp4/ag-uuaOo4)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-PKaiOx/ag-1KaqNx)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 11:59:45 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:20 AM by AutoGen 5.18.5
.\" From the definitions calc_tickadj-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt CALC_TICKADJ 1calc_tickadjmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (calc_tickadj-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 11:59:47 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:22 AM by AutoGen 5.18.5
.\" From the definitions calc_tickadj-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<h2 class="unnumbered">calc_tickadj User's Manual</h2>
<p>This document describes the use of the NTP Project's <code>calc_tickadj</code> program.
-This document applies to version 4.3.91 of <code>calc_tickadj</code>.
+This document applies to version 4.3.92 of <code>calc_tickadj</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH calc_tickadj 1calc_tickadjman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH calc_tickadj 1calc_tickadjman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-iuaGp4/ag-uuaOo4)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-PKaiOx/ag-1KaqNx)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 11:59:45 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:20 AM by AutoGen 5.18.5
.\" From the definitions calc_tickadj-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt CALC_TICKADJ 1calc_tickadjmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (calc_tickadj-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 11:59:47 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:22 AM by AutoGen 5.18.5
.\" From the definitions calc_tickadj-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-calc_tickadj.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 11:59:49 AM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:54:24 AM by AutoGen 5.18.5
# From the definitions calc_tickadj-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
#
# EDIT THIS FILE WITH CAUTION (invoke-plot_summary.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:00:36 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:55:11 AM by AutoGen 5.18.5
# From the definitions plot_summary-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-plot_summary - plot statistics generated by summary script - Ver. 4.3.91
+plot_summary - plot statistics generated by summary script - Ver. 4.3.92
USAGE: plot_summary [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
--directory=str Where the summary files are
#
# EDIT THIS FILE WITH CAUTION (invoke-summary.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:00:42 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:55:16 AM by AutoGen 5.18.5
# From the definitions summary-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-summary - compute various stastics from NTP stat files - Ver. 4.3.91
+summary - compute various stastics from NTP stat files - Ver. 4.3.92
USAGE: summary [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
--directory=str Directory containing stat files
#
# EDIT THIS FILE WITH CAUTION (invoke-ntp-wait.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 11:59:58 AM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:54:34 AM by AutoGen 5.18.5
# From the definitions ntp-wait-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.3.91
+ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.3.92
USAGE: ntp-wait [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
-n, --tries=num Number of times to check ntpd
# EDIT THIS FILE WITH CAUTION (ntp-wait-opts)
#
-# It has been AutoGen-ed January 24, 2016 at 11:59:53 AM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:54:28 AM by AutoGen 5.18.5
# From the definitions ntp-wait-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.3.91
+ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.3.92
USAGE: ntp-wait [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
-n, --tries=num Number of times to check ntpd
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp-wait 1ntp-waitman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH ntp-wait 1ntp-waitman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-7RaGP5/ag-iSaOO5)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-KZaicz/ag-YZaqbz)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 11:59:55 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:30 AM by AutoGen 5.18.5
.\" From the definitions ntp-wait-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTP_WAIT 1ntp-waitmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp-wait-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:01 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:36 AM by AutoGen 5.18.5
.\" From the definitions ntp-wait-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
and only then start any applicaitons (like database servers) that require
accurate and stable time.
- <p>This document applies to version 4.3.91 of <code>ntp-wait</code>.
+ <p>This document applies to version 4.3.92 of <code>ntp-wait</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
used to select the program, defaulting to <span class="file">more</span>. Both will exit
with a status code of 0.
-<pre class="example">ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.3.91
+<pre class="example">ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.3.92
USAGE: ntp-wait [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
-n, --tries=num Number of times to check ntpd
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp-wait @NTP_WAIT_MS@ "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH ntp-wait @NTP_WAIT_MS@ "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-7RaGP5/ag-iSaOO5)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-KZaicz/ag-YZaqbz)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 11:59:55 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:30 AM by AutoGen 5.18.5
.\" From the definitions ntp-wait-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTP_WAIT @NTP_WAIT_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp-wait-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:01 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:36 AM by AutoGen 5.18.5
.\" From the definitions ntp-wait-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntpsweep.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:00:05 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:54:40 AM by AutoGen 5.18.5
# From the definitions ntpsweep-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntpsweep - Print various informations about given ntp servers - Ver. 4.3.91
+ntpsweep - Print various informations about given ntp servers - Ver. 4.3.92
USAGE: ntpsweep [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [hostfile]
-l, --host-list=str Host to execute actions on
# EDIT THIS FILE WITH CAUTION (ntpsweep-opts)
#
-# It has been AutoGen-ed January 24, 2016 at 12:00:03 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:54:38 AM by AutoGen 5.18.5
# From the definitions ntpsweep-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-ntpsweep - Print various informations about given ntp servers - Ver. 4.3.91
+ntpsweep - Print various informations about given ntp servers - Ver. 4.3.92
USAGE: ntpsweep [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [hostfile]
-l, --host-list=str Host to execute actions on
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpsweep 1ntpsweepman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH ntpsweep 1ntpsweepman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-eRayLa/ag-rRaGKa)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-A1aiEA/ag-N1aqDA)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:07 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:42 AM by AutoGen 5.18.5
.\" From the definitions ntpsweep-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPSWEEP 1ntpsweepmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpsweep-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:10 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:45 AM by AutoGen 5.18.5
.\" From the definitions ntpsweep-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<p>This document describes the use of the NTP Project's <code>ntpsweep</code> program.
- <p>This document applies to version 4.3.91 of <code>ntpsweep</code>.
+ <p>This document applies to version 4.3.92 of <code>ntpsweep</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
used to select the program, defaulting to <span class="file">more</span>. Both will exit
with a status code of 0.
-<pre class="example">ntpsweep - Print various informations about given ntp servers - Ver. 4.3.91
+<pre class="example">ntpsweep - Print various informations about given ntp servers - Ver. 4.3.92
USAGE: ntpsweep [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [hostfile]
-l, --host-list=str Host to execute actions on
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntpsweep 1ntpsweepman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH ntpsweep 1ntpsweepman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-eRayLa/ag-rRaGKa)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-A1aiEA/ag-N1aqDA)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:07 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:42 AM by AutoGen 5.18.5
.\" From the definitions ntpsweep-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPSWEEP 1ntpsweepmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntpsweep-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:10 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:45 AM by AutoGen 5.18.5
.\" From the definitions ntpsweep-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntptrace.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:00:18 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:54:52 AM by AutoGen 5.18.5
# From the definitions ntptrace-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntptrace - Trace peers of an NTP server - Ver. 4.3.91
+ntptrace - Trace peers of an NTP server - Ver. 4.3.92
USAGE: ntptrace [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [host]
-n, --numeric Print IP addresses instead of hostnames
# EDIT THIS FILE WITH CAUTION (ntptrace-opts)
#
-# It has been AutoGen-ed January 24, 2016 at 12:00:12 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:54:47 AM by AutoGen 5.18.5
# From the definitions ntptrace-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-ntptrace - Trace peers of an NTP server - Ver. 4.3.91
+ntptrace - Trace peers of an NTP server - Ver. 4.3.92
USAGE: ntptrace [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [host]
-n, --numeric Print IP addresses instead of hostnames
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntptrace 1ntptraceman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH ntptrace 1ntptraceman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-IBaa.b/ag-VBai9b)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-SIaqWB/ag-4IayVB)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:14 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:49 AM by AutoGen 5.18.5
.\" From the definitions ntptrace-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPTRACE 1ntptracemdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntptrace-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:20 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:54 AM by AutoGen 5.18.5
.\" From the definitions ntptrace-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<h2 class="unnumbered">Simple Network Time Protocol User Manual</h2>
<p>This document describes the use of the NTP Project's <code>ntptrace</code> program.
-This document applies to version 4.3.91 of <code>ntptrace</code>.
+This document applies to version 4.3.92 of <code>ntptrace</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
used to select the program, defaulting to <span class="file">more</span>. Both will exit
with a status code of 0.
-<pre class="example">ntptrace - Trace peers of an NTP server - Ver. 4.3.91
+<pre class="example">ntptrace - Trace peers of an NTP server - Ver. 4.3.92
USAGE: ntptrace [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [host]
-n, --numeric Print IP addresses instead of hostnames
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntptrace @NTPTRACE_MS@ "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH ntptrace @NTPTRACE_MS@ "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-IBaa.b/ag-VBai9b)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-SIaqWB/ag-4IayVB)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:14 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:49 AM by AutoGen 5.18.5
.\" From the definitions ntptrace-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTPTRACE @NTPTRACE_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntptrace-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:20 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:54 AM by AutoGen 5.18.5
.\" From the definitions ntptrace-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
# EDIT THIS FILE WITH CAUTION (plot_summary-opts)
#
-# It has been AutoGen-ed January 24, 2016 at 12:00:32 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:55:07 AM by AutoGen 5.18.5
# From the definitions plot_summary-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-plot_summary - plot statistics generated by summary script - Ver. 4.3.91
+plot_summary - plot statistics generated by summary script - Ver. 4.3.92
USAGE: plot_summary [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
--directory=str Where the summary files are
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH plot_summary 1plot_summaryman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH plot_summary 1plot_summaryman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-XtaWZe/ag-.ta4Ye)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-ftaWLE/ag-sta4KE)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:38 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:55:13 AM by AutoGen 5.18.5
.\" From the definitions plot_summary-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt PLOT_SUMMARY 1plot_summarymdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (plot_summary-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:40 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:55:14 AM by AutoGen 5.18.5
.\" From the definitions plot_summary-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<h2 class="unnumbered">Plot_summary User Manual</h2>
<p>This document describes the use of the NTP Project's <code>plot_summary</code> program.
-This document applies to version 4.3.91 of <code>plot_summary</code>.
+This document applies to version 4.3.92 of <code>plot_summary</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
used to select the program, defaulting to <span class="file">more</span>. Both will exit
with a status code of 0.
-<pre class="example">plot_summary - plot statistics generated by summary script - Ver. 4.3.91
+<pre class="example">plot_summary - plot statistics generated by summary script - Ver. 4.3.92
USAGE: plot_summary [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
--directory=str Where the summary files are
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH plot_summary 1plot_summaryman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH plot_summary 1plot_summaryman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-XtaWZe/ag-.ta4Ye)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-ftaWLE/ag-sta4KE)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:38 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:55:13 AM by AutoGen 5.18.5
.\" From the definitions plot_summary-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt PLOT_SUMMARY 1plot_summarymdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (plot_summary-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:40 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:55:14 AM by AutoGen 5.18.5
.\" From the definitions plot_summary-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
# EDIT THIS FILE WITH CAUTION (summary-opts)
#
-# It has been AutoGen-ed January 24, 2016 at 12:00:34 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:55:09 AM by AutoGen 5.18.5
# From the definitions summary-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-summary - compute various stastics from NTP stat files - Ver. 4.3.91
+summary - compute various stastics from NTP stat files - Ver. 4.3.92
USAGE: summary [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
--directory=str Directory containing stat files
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH summary 1summaryman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH summary 1summaryman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-IOaybf/ag-VOaGaf)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-HNayZE/ag-UNaGYE)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:44 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:55:18 AM by AutoGen 5.18.5
.\" From the definitions summary-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt SUMMARY 1summarymdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (summary-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:45 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:55:20 AM by AutoGen 5.18.5
.\" From the definitions summary-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<h2 class="unnumbered">Summary User Manual</h2>
<p>This document describes the use of the NTP Project's <code>summary</code> program.
-This document applies to version 4.3.91 of <code>summary</code>.
+This document applies to version 4.3.92 of <code>summary</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
used to select the program, defaulting to <span class="file">more</span>. Both will exit
with a status code of 0.
-<pre class="example">summary - compute various stastics from NTP stat files - Ver. 4.3.91
+<pre class="example">summary - compute various stastics from NTP stat files - Ver. 4.3.92
USAGE: summary [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
--directory=str Directory containing stat files
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH summary 1summaryman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH summary 1summaryman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-IOaybf/ag-VOaGaf)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-HNayZE/ag-UNaGYE)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:44 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:55:18 AM by AutoGen 5.18.5
.\" From the definitions summary-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt SUMMARY 1summarymdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (summary-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:45 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:55:20 AM by AutoGen 5.18.5
.\" From the definitions summary-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-update-leap.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:00:26 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:55:00 AM by AutoGen 5.18.5
# From the definitions update-leap-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
# EDIT THIS FILE WITH CAUTION (update-leap-opts)
#
-# It has been AutoGen-ed January 24, 2016 at 12:00:32 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:55:06 AM by AutoGen 5.18.5
# From the definitions update-leap-opts.def
# and the template file perlopt
'help|?', 'more-help'));
$usage = <<'USAGE';
-update-leap - leap-seconds file manager/updater - Ver. 4.3.91
+update-leap - leap-seconds file manager/updater - Ver. 4.3.92
USAGE: update-leap [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
-s, --source-url=str The URL of the master copy of the leapseconds file
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH update-leap 1update-leapman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH update-leap 1update-leapman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-qBaOZc/ag-DBaWYc)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-.ta4LC/ag-luaaLC)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:22 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:56 AM by AutoGen 5.18.5
.\" From the definitions update-leap-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt UPDATE_LEAP 1update-leapmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (update-leap-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:30 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:55:05 AM by AutoGen 5.18.5
.\" From the definitions update-leap-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
<p>This document describes the use of the NTP Project's <code>update-leap</code> program.
- <p>This document applies to version 4.3.91 of <code>update-leap</code>.
+ <p>This document applies to version 4.3.92 of <code>update-leap</code>.
<div class="shortcontents">
<h2>Short Contents</h2>
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH update-leap 1update-leapman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH update-leap 1update-leapman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-qBaOZc/ag-DBaWYc)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-.ta4LC/ag-luaaLC)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:22 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:54:56 AM by AutoGen 5.18.5
.\" From the definitions update-leap-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt UPDATE_LEAP 1update-leapmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (update-leap-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:00:30 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:55:05 AM by AutoGen 5.18.5
.\" From the definitions update-leap-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-sntp.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 11:56:38 AM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 11:51:22 AM by AutoGen 5.18.5
# From the definitions sntp-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-sntp - standard Simple Network Time Protocol client program - Ver. 4.3.91
+sntp - standard Simple Network Time Protocol client program - Ver. 4.3.92
Usage: sntp [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... \
[ hostname-or-IP ...]
Flg Arg Option-Name Description
/*
* EDIT THIS FILE WITH CAUTION (sntp-opts.c)
*
- * It has been AutoGen-ed January 24, 2016 at 11:55:58 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 11:50:50 AM by AutoGen 5.18.5
* From the definitions sntp-opts.def
* and the template file options
*
* static const strings for sntp options
*/
static char const sntp_opt_strs[2546] =
-/* 0 */ "sntp 4.3.91\n"
+/* 0 */ "sntp 4.3.92\n"
"Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
/* 2297 */ "LOAD_OPTS\0"
/* 2307 */ "no-load-opts\0"
/* 2320 */ "SNTP\0"
-/* 2325 */ "sntp - standard Simple Network Time Protocol client program - Ver. 4.3.91\n"
+/* 2325 */ "sntp - standard Simple Network Time Protocol client program - Ver. 4.3.92\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \\\n"
"\t\t[ hostname-or-IP ...]\n\0"
/* 2483 */ "$HOME\0"
/* 2491 */ ".ntprc\0"
/* 2498 */ "http://bugs.ntp.org, bugs@ntp.org\0"
/* 2532 */ "\n\0"
-/* 2534 */ "sntp 4.3.91";
+/* 2534 */ "sntp 4.3.92";
/**
* ipv4 option description with
translate option names.
*/
/* referenced via sntpOptions.pzCopyright */
- puts(_("sntp 4.3.91\n\
+ puts(_("sntp 4.3.92\n\
Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("load options from a config file"));
/* referenced via sntpOptions.pzUsageTitle */
- puts(_("sntp - standard Simple Network Time Protocol client program - Ver. 4.3.91\n\
+ puts(_("sntp - standard Simple Network Time Protocol client program - Ver. 4.3.92\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \\\n\
\t\t[ hostname-or-IP ...]\n"));
puts(_("\n"));
/* referenced via sntpOptions.pzFullVersion */
- puts(_("sntp 4.3.91"));
+ puts(_("sntp 4.3.92"));
/* referenced via sntpOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (sntp-opts.h)
*
- * It has been AutoGen-ed January 24, 2016 at 11:55:57 AM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 11:50:50 AM by AutoGen 5.18.5
* From the definitions sntp-opts.def
* and the template file options
*
/** count of all options for sntp */
#define OPTION_CT 23
/** sntp version */
-#define SNTP_VERSION "4.3.91"
+#define SNTP_VERSION "4.3.92"
/** Full sntp version text */
-#define SNTP_FULL_VERSION "sntp 4.3.91"
+#define SNTP_FULL_VERSION "sntp 4.3.92"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH sntp 1sntpman "24 Jan 2016" "4.3.91" "User Commands"
+.TH sntp 1sntpman "27 Apr 2016" "4.3.92" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-iKayeL/ag-uKaqdL)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-RfaaAe/ag-3fa4ye)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 11:56:34 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:51:18 AM by AutoGen 5.18.5
.\" From the definitions sntp-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt SNTP 1sntpmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (sntp-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 11:56:41 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:51:25 AM by AutoGen 5.18.5
.\" From the definitions sntp-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
clock. Run as root, it can correct the system clock to this offset as
well. It can be run as an interactive command or from a cron job.
- <p>This document applies to version 4.3.91 of <code>sntp</code>.
+ <p>This document applies to version 4.3.92 of <code>sntp</code>.
<p>The program implements the SNTP protocol as defined by RFC 5905, the NTPv4
IETF specification.
used to select the program, defaulting to <span class="file">more</span>. Both will exit
with a status code of 0.
-<pre class="example">sntp - standard Simple Network Time Protocol client program - Ver. 4.3.91
+<pre class="example">sntp - standard Simple Network Time Protocol client program - Ver. 4.3.92
Usage: sntp [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \
[ hostname-or-IP ...]
Flg Arg Option-Name Description
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH sntp @SNTP_MS@ "24 Jan 2016" "4.3.91" "User Commands"
+.TH sntp @SNTP_MS@ "27 Apr 2016" "4.3.92" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-iKayeL/ag-uKaqdL)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-RfaaAe/ag-3fa4ye)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 11:56:34 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:51:18 AM by AutoGen 5.18.5
.\" From the definitions sntp-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt SNTP @SNTP_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (sntp-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 11:56:41 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 11:51:25 AM by AutoGen 5.18.5
.\" From the definitions sntp-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
#
# EDIT THIS FILE WITH CAUTION (invoke-ntp-keygen.texi)
#
-# It has been AutoGen-ed January 24, 2016 at 12:06:01 PM by AutoGen 5.18.5
+# It has been AutoGen-ed April 27, 2016 at 12:00:25 PM by AutoGen 5.18.5
# From the definitions ntp-keygen-opts.def
# and the template file agtexi-cmd.tpl
@end ignore
@exampleindent 0
@example
-ntp-keygen (ntp) - Create a NTP host key - Ver. 4.3.91
+ntp-keygen (ntp) - Create a NTP host key - Ver. 4.3.92
Usage: ntp-keygen [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]...
Flg Arg Option-Name Description
-b Num imbits identity modulus bits
/*
* EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.c)
*
- * It has been AutoGen-ed January 24, 2016 at 12:05:46 PM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 12:00:10 PM by AutoGen 5.18.5
* From the definitions ntp-keygen-opts.def
* and the template file options
*
* static const strings for ntp-keygen options
*/
static char const ntp_keygen_opt_strs[2416] =
-/* 0 */ "ntp-keygen (ntp) 4.3.91\n"
+/* 0 */ "ntp-keygen (ntp) 4.3.92\n"
"Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n"
"This is free software. It is licensed for use, modification and\n"
"redistribution under the terms of the NTP License, copies of which\n"
/* 2201 */ "no-load-opts\0"
/* 2214 */ "no\0"
/* 2217 */ "NTP_KEYGEN\0"
-/* 2228 */ "ntp-keygen (ntp) - Create a NTP host key - Ver. 4.3.91\n"
+/* 2228 */ "ntp-keygen (ntp) - Create a NTP host key - Ver. 4.3.92\n"
"Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]...\n\0"
/* 2341 */ "$HOME\0"
/* 2347 */ ".\0"
/* 2349 */ ".ntprc\0"
/* 2356 */ "http://bugs.ntp.org, bugs@ntp.org\0"
/* 2390 */ "\n\0"
-/* 2392 */ "ntp-keygen (ntp) 4.3.91";
+/* 2392 */ "ntp-keygen (ntp) 4.3.92";
/**
* imbits option description:
translate option names.
*/
/* referenced via ntp_keygenOptions.pzCopyright */
- puts(_("ntp-keygen (ntp) 4.3.91\n\
+ puts(_("ntp-keygen (ntp) 4.3.92\n\
Copyright (C) 1992-2016 The University of Delaware and Network Time Foundation, all rights reserved.\n\
This is free software. It is licensed for use, modification and\n\
redistribution under the terms of the NTP License, copies of which\n\
puts(_("load options from a config file"));
/* referenced via ntp_keygenOptions.pzUsageTitle */
- puts(_("ntp-keygen (ntp) - Create a NTP host key - Ver. 4.3.91\n\
+ puts(_("ntp-keygen (ntp) - Create a NTP host key - Ver. 4.3.92\n\
Usage: %s [ -<flag> [<val>] | --<name>[{=| }<val>] ]...\n"));
/* referenced via ntp_keygenOptions.pzExplain */
puts(_("\n"));
/* referenced via ntp_keygenOptions.pzFullVersion */
- puts(_("ntp-keygen (ntp) 4.3.91"));
+ puts(_("ntp-keygen (ntp) 4.3.92"));
/* referenced via ntp_keygenOptions.pzFullUsage */
puts(_("<<<NOT-FOUND>>>"));
/*
* EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.h)
*
- * It has been AutoGen-ed January 24, 2016 at 12:05:45 PM by AutoGen 5.18.5
+ * It has been AutoGen-ed April 27, 2016 at 12:00:09 PM by AutoGen 5.18.5
* From the definitions ntp-keygen-opts.def
* and the template file options
*
/** count of all options for ntp-keygen */
#define OPTION_CT 26
/** ntp-keygen version */
-#define NTP_KEYGEN_VERSION "4.3.91"
+#define NTP_KEYGEN_VERSION "4.3.92"
/** Full ntp-keygen version text */
-#define NTP_KEYGEN_FULL_VERSION "ntp-keygen (ntp) 4.3.91"
+#define NTP_KEYGEN_FULL_VERSION "ntp-keygen (ntp) 4.3.92"
/**
* Interface defines for all options. Replace "n" with the UPPER_CASED
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp-keygen 1ntp-keygenman "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH ntp-keygen 1ntp-keygenman "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-JiaOto/ag-ViaGso)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-3NaikO/ag-dOaajO)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:05:57 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 12:00:21 PM by AutoGen 5.18.5
.\" From the definitions ntp-keygen-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTP_KEYGEN 1ntp-keygenmdoc User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:06:04 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 12:00:28 PM by AutoGen 5.18.5
.\" From the definitions ntp-keygen-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
printable ASCII format so they can be embedded as MIME attachments in
mail to other sites.
- <p>This document applies to version 4.3.91 of <code>ntp-keygen</code>.
+ <p>This document applies to version 4.3.92 of <code>ntp-keygen</code>.
<div class="node">
<p><hr>
used to select the program, defaulting to <span class="file">more</span>. Both will exit
with a status code of 0.
-<pre class="example">ntp-keygen (ntp) - Create a NTP host key - Ver. 4.3.90
+<pre class="example">ntp-keygen (ntp) - Create a NTP host key - Ver. 4.3.91
Usage: ntp-keygen [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
Flg Arg Option-Name Description
-b Num imbits identity modulus bits
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp-keygen @NTP_KEYGEN_MS@ "24 Jan 2016" "ntp (4.3.91)" "User Commands"
+.TH ntp-keygen @NTP_KEYGEN_MS@ "27 Apr 2016" "ntp (4.3.92)" "User Commands"
.\"
-.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-JiaOto/ag-ViaGso)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-3NaikO/ag-dOaajO)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:05:57 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 12:00:21 PM by AutoGen 5.18.5
.\" From the definitions ntp-keygen-opts.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 24 2016
+.Dd April 27 2016
.Dt NTP_KEYGEN @NTP_KEYGEN_MS@ User Commands
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp-keygen-opts.mdoc)
.\"
-.\" It has been AutoGen-ed January 24, 2016 at 12:06:04 PM by AutoGen 5.18.5
+.\" It has been AutoGen-ed April 27, 2016 at 12:00:28 PM by AutoGen 5.18.5
.\" From the definitions ntp-keygen-opts.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
projects / thirdparty / ntp.git / commitdiff
