arm64: dts: rockchip: configure hdmirx in Rock 5 ITX

The Radxa Rock 5 ITX board exposes an HDMI input exactly the same way as
the Rock 5B, but this was not reflected in its DTS.

Change the rk3588-rock-5-itx to configure and enable the hdmi_receiver
and hdmi_receiver_cma nodes.

The hot-plug detection (HPD) pin keeps the hdmirx_det name rather than
the hdmirx_hpd name used in other boards since that is what matches the
official schematics (HDMIIRX_DET_L).

The configurations were confirmed to be identical on the downstream
Radxa kernel, and this has been tested to work on a Rock 5 ITX board
running kernel 6.19.3.

Signed-off-by: Pedro Alves <pta2002@pta2002.com>
Link: https://patch.msgid.link/20260323-radxa-r5-itx-hdmirx-v2-1-c52501909577@pta2002.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
index de154adb14974823306adf9b16ce72bf49f715af..f7dd01d6fa0ab3acf2577d57c292e547394223a9 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
@@ -367,6 +367,18 @@
        status = "okay";
 };
 
+&hdmi_receiver_cma {
+       status = "okay";
+};
+
+&hdmi_receiver {
+       pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_det>;
+       pinctrl-names = "default";
+       hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+
+       status = "okay";
+};
+
 &hdptxphy1 {
        status = "okay";
 };