arch: arm: dts: k3-am67a-beagley-ai-u-boot: Mark main_gpio1 as bootph-all

main_gpio1 controls the voltage for the SDcard from 3.3v to 1.8v.
This is required for proper operation of SDcard through various boot
stages.

Fixes the following seen in the boot log:
failed to set vqmmc-voltage to 3.3V

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>

diff --git a/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi b/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi
index 6c52038cdcafe93a38e1a9734005d3fbc86fc865..6330ca93fc748ee84c41884612d160b2ec2bbee2 100644 (file)
--- a/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi
+++ b/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi
@@ -53,6 +53,10 @@
        status = "disabled";
 };
 
+&main_gpio1 {
+       bootph-all;
+};
+
 #if IS_ENABLED(CONFIG_TARGET_J722S_R5_BEAGLEY_AI)
 
 &binman {