dt-bindings: gpio: Convert lantiq,gpio-mm-lantiq to DT schema

Convert the Lantiq SoC External Bus memory mapped GPIO binding to DT
schema format. It's a straight forward conversion.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250714202837.3011521-1-robh@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt b/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt
deleted file mode 100644 (file)
index f93d514..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Lantiq SoC External Bus memory mapped GPIO controller
-
-By attaching hardware latches to the EBU it is possible to create output
-only gpios. This driver configures a special memory address, which when
-written to outputs 16 bit to the latches.
-
-The node describing the memory mapped GPIOs needs to be a child of the node
-describing the "lantiq,localbus".
-
-Required properties:
-- compatible : Should be "lantiq,gpio-mm-lantiq"
-- reg : Address and length of the register set for the device
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify optional parameters (currently
-  unused).
-- gpio-controller : Marks the device node as a gpio controller.
-
-Optional properties:
-- lantiq,shadow : The default value that we shall assume as already set on the
-  shift register cascade.
-
-Example:
-
-localbus@0 {
-       #address-cells = <2>;
-       #size-cells = <1>;
-       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-               1 0 0x4000000 0x4000010>; /* addsel1 */
-       compatible = "lantiq,localbus", "simple-bus";
-
-       gpio_mm0: gpio@4000000 {
-               compatible = "lantiq,gpio-mm";
-               reg = <1 0x0 0x10>;
-               gpio-controller;
-               #gpio-cells = <2>;
-               lantiq,shadow = <0x77f>
-       };
-}

diff --git a/Documentation/devicetree/bindings/gpio/lantiq,gpio-mm-lantiq.yaml b/Documentation/devicetree/bindings/gpio/lantiq,gpio-mm-lantiq.yaml
new file mode 100644 (file)
index 0000000..eaf53a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/lantiq,gpio-mm-lantiq.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/lantiq,gpio-mm-lantiq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq SoC External Bus memory mapped GPIO controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description: |
+  By attaching hardware latches to the EBU it is possible to create output
+  only gpios. This driver configures a special memory address, which when
+  written to outputs 16 bit to the latches.
+
+  The node describing the memory mapped GPIOs needs to be a child of the node
+  describing the "lantiq,localbus".
+
+properties:
+  compatible:
+    enum:
+      - lantiq,gpio-mm-lantiq
+      - lantiq,gpio-mm
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  lantiq,shadow:
+    description: The default value that we shall assume as already set on the shift register cascade.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@4000000 {
+        compatible = "lantiq,gpio-mm-lantiq";
+        reg = <0x4000000 0x10>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        lantiq,shadow = <0x77f>;
+    };