scsi: hisi_sas: Fix rescan after deleting a disk

[ Upstream commit e9dedc13bb11bc553754abecb322e5e41d1b4fef ]

Removing an ATA device via sysfs means that the device may not be found
through re-scanning:

root@ubuntu:/home/john# lsscsi
[0:0:0:0] disk SanDisk LT0200MO P404 /dev/sda
[0:0:1:0] disk ATA HGST HUS724040AL A8B0 /dev/sdb
[0:0:8:0] enclosu 12G SAS Expander RevB -
root@ubuntu:/home/john# echo 1 > /sys/block/sdb/device/delete
root@ubuntu:/home/john# echo "- - -" > /sys/class/scsi_host/host0/scan
root@ubuntu:/home/john# lsscsi
[0:0:0:0] disk SanDisk LT0200MO P404 /dev/sda
[0:0:8:0] enclosu 12G SAS Expander RevB -
root@ubuntu:/home/john#

The problem is that the rescan of the device may conflict with the device
in being re-initialized, as follows:

 - In the rescan we call hisi_sas_slave_alloc() in store_scan() ->
   sas_user_scan() -> [__]scsi_scan_target() -> scsi_probe_and_add_lunc()
   -> scsi_alloc_sdev() -> hisi_sas_slave_alloc() -> hisi_sas_init_device()
   In hisi_sas_init_device() we issue an IT nexus reset for ATA devices

 - That IT nexus causes the remote PHY to go down and this triggers a bcast
   event

 - In parallel libsas processes the bcast event, finds that the phy is down
   and marks the device as gone

The hard reset issued in hisi_sas_init_device() is unncessary - as
described in the code comment - so remove it. Also set dev status as
HISI_SAS_DEV_NORMAL as the hisi_sas_init_device() call.

Link: https://lore.kernel.org/r/1652354134-171343-4-git-send-email-john.garry@huawei.com
Fixes: 36c6b7613ef1 ("scsi: hisi_sas: Initialise devices in .slave_alloc callback")
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index ebf5ec38891bb5508fb10d06a3b8c5cfa0efaf35..2fbeb151aadbeca851318fd1b13e06a8cadb604f 100644 (file)
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -680,8 +680,6 @@ static int hisi_sas_init_device(struct domain_device *device)
        struct hisi_sas_tmf_task tmf_task;
        int retry = HISI_SAS_DISK_RECOVER_CNT;
        struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
-       struct device *dev = hisi_hba->dev;
-       struct sas_phy *local_phy;
 
        switch (device->dev_type) {
        case SAS_END_DEVICE:
@@ -702,30 +700,18 @@ static int hisi_sas_init_device(struct domain_device *device)
        case SAS_SATA_PM_PORT:
        case SAS_SATA_PENDING:
                /*
-                * send HARD RESET to clear previous affiliation of
-                * STP target port
+                * If an expander is swapped when a SATA disk is attached then
+                * we should issue a hard reset to clear previous affiliation
+                * of STP target port, see SPL (chapter 6.19.4).
+                *
+                * However we don't need to issue a hard reset here for these
+                * reasons:
+                * a. When probing the device, libsas/libata already issues a
+                * hard reset in sas_probe_sata() -> ata_sas_async_probe().
+                * Note that in hisi_sas_debug_I_T_nexus_reset() we take care
+                * to issue a hard reset by checking the dev status (== INIT).
+                * b. When resetting the controller, this is simply unnecessary.
                 */
-               local_phy = sas_get_local_phy(device);
-               if (!scsi_is_sas_phy_local(local_phy) &&
-                   !test_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags)) {
-                       unsigned long deadline = ata_deadline(jiffies, 20000);
-                       struct sata_device *sata_dev = &device->sata_dev;
-                       struct ata_host *ata_host = sata_dev->ata_host;
-                       struct ata_port_operations *ops = ata_host->ops;
-                       struct ata_port *ap = sata_dev->ap;
-                       struct ata_link *link;
-                       unsigned int classes;
-
-                       ata_for_each_link(link, ap, EDGE)
-                               rc = ops->hardreset(link, &classes,
-                                                   deadline);
-               }
-               sas_put_local_phy(local_phy);
-               if (rc) {
-                       dev_warn(dev, "SATA disk hardreset fail: %d\n", rc);
-                       return rc;
-               }
-
                while (retry-- > 0) {
                        rc = hisi_sas_softreset_ata_disk(device);
                        if (!rc)
@@ -741,15 +727,19 @@ static int hisi_sas_init_device(struct domain_device *device)
 
 int hisi_sas_slave_alloc(struct scsi_device *sdev)
 {
-       struct domain_device *ddev;
+       struct domain_device *ddev = sdev_to_domain_dev(sdev);
+       struct hisi_sas_device *sas_dev = ddev->lldd_dev;
        int rc;
 
        rc = sas_slave_alloc(sdev);
        if (rc)
                return rc;
-       ddev = sdev_to_domain_dev(sdev);
 
-       return hisi_sas_init_device(ddev);
+       rc = hisi_sas_init_device(ddev);
+       if (rc)
+               return rc;
+       sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+       return 0;
 }
 EXPORT_SYMBOL_GPL(hisi_sas_slave_alloc);
 
@@ -799,7 +789,6 @@ static int hisi_sas_dev_found(struct domain_device *device)
        dev_info(dev, "dev[%d:%x] found\n",
                sas_dev->device_id, sas_dev->dev_type);
 
-       sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
        return 0;
 
 err_out: