Documentation/driver-api/cxl: device hotplug section

Describe cxl memory device hotplug implications, in particular how the
platform CEDT CFMWS must be described to support successful hot-add of
memory devices.

Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alejandro Lucero Palau <alucerop@amd.com>
Link: https://patch.msgid.link/20251219170538.1675743-3-gourry@gourry.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>

diff --git a/Documentation/driver-api/cxl/index.rst b/Documentation/driver-api/cxl/index.rst
index c1106a68b67c6ede81052f0b569c7bb1cc2e4f47..5a734988a5afd167142f5119d617b4fff96d515f 100644 (file)
--- a/Documentation/driver-api/cxl/index.rst
+++ b/Documentation/driver-api/cxl/index.rst
@@ -30,6 +30,7 @@ that have impacts on each other.  The docs here break up configurations steps.
    platform/acpi
    platform/cdat
    platform/example-configs
+   platform/device-hotplug
 
 .. toctree::
    :maxdepth: 2

diff --git a/Documentation/driver-api/cxl/platform/bios-and-efi.rst b/Documentation/driver-api/cxl/platform/bios-and-efi.rst
index 9034c206cf8e27d674ca3e916885516089d3226d..a4b44c018f0936e35ee9c8c9d8e1627af9b4230b 100644 (file)
--- a/Documentation/driver-api/cxl/platform/bios-and-efi.rst
+++ b/Documentation/driver-api/cxl/platform/bios-and-efi.rst
@@ -49,6 +49,9 @@ up without requiring CXL driver support.  These platform vendors should
 test their configurations with the existing CXL driver and provide driver
 support for their auto-configurations if features like RAS are required.
 
+Platforms requiring boot-time programming and/or locking of CXL fabric
+components may prevent features, such as device hot-plug, from working.
+
 UEFI Settings
 =============
 If your platform supports it, the :code:`uefisettings` command can be used to

diff --git a/Documentation/driver-api/cxl/platform/device-hotplug.rst b/Documentation/driver-api/cxl/platform/device-hotplug.rst
new file mode 100644 (file)
index 0000000..e4a065f
--- /dev/null
+++ b/Documentation/driver-api/cxl/platform/device-hotplug.rst
@@ -0,0 +1,130 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+CXL Device Hotplug
+==================
+
+Device hotplug refers to *physical* hotplug of a device (addition or removal
+of a physical device from the machine).
+
+BIOS/EFI software is expected to configure sufficient resources **at boot
+time** to allow hotplugged devices to be configured by software (such as
+proximity domains, HPA regions, and host-bridge configurations).
+
+BIOS/EFI is not expected (**nor suggested**) to configure hotplugged
+devices at hotplug time (i.e. HDM decoders should be left unprogrammed).
+
+This document covers some examples of those resources, but should not
+be considered exhaustive.
+
+Hot-Remove
+==========
+Hot removal of a device typically requires careful removal of software
+constructs (memory regions, associated drivers) which manage these devices.
+
+Hard-removing a CXL.mem device without carefully tearing down driver stacks
+is likely to cause the system to machine-check (or at least SIGBUS if memory
+access is limited to user space).
+
+Memory Device Hot-Add
+=====================
+A device present at boot may be associated with a CXL Fixed Memory Window
+reported in :doc:`CEDT<acpi/cedt>`.  That CFMWS may match the size of the
+device, but the construction of the CEDT CFMWS is platform-defined.
+
+Hot-adding a memory device requires this pre-defined, **static** CFMWS to
+have sufficient HPA space to describe that device.
+
+There are a few common scenarios to consider.
+
+Single-Endpoint Memory Device Present at Boot
+---------------------------------------------
+A device present at boot likely had its capacity reported in the
+:doc:`CEDT<acpi/cedt>`.  If a device is removed and a new device hotplugged,
+the capacity of the new device will be limited to the original CFMWS capacity.
+
+Adding capacity larger than the original device will cause memory region
+creation to fail if the region size is greater than the CFMWS size.
+
+The CFMWS is **static** and cannot be adjusted.  Platforms which may expect
+different sized devices to be hotplugged must allocate sufficient CFMWS space
+**at boot time** to cover all future expected devices.
+
+Multi-Endpoint Memory Device Present at Boot
+--------------------------------------------
+Non-switch-based Multi-Endpoint devices are outside the scope of what the
+CXL specification describes, but they are technically possible. We describe
+them here for instructive reasons only - this does not imply Linux support.
+
+A hot-plug capable CXL memory device, such as one which presents multiple
+expanders as a single large-capacity device, should report the **maximum
+possible capacity** for the device at boot. ::
+
+                  HB0
+                  RP0
+                   |
+     [Multi-Endpoint Memory Device]
+              _____|_____
+             |          |
+        [Endpoint0]   [Empty]
+
+
+Limiting the size to the capacity preset at boot will limit hot-add support
+to replacing capacity that was present at boot.
+
+No CXL Device Present at Boot
+-----------------------------
+When no CXL memory device is present on boot, some platforms omit the CFMWS
+in the :doc:`CEDT<acpi/cedt>`.  When this occurs, hot-add is not possible.
+
+This describes the base case for any given device not being present at boot.
+If a future possible device is not described in the CEDT at boot, hot-add
+of that device is either limited or not possible.
+
+For a platform to support hot-add of a full memory device, it must allocate
+a CEDT CFMWS region with sufficient memory capacity to cover all future
+potentially added capacity (along with any relevant CEDT CHBS entry).
+
+To support memory hotplug directly on the host bridge/root port, or on a switch
+downstream of the host bridge, a platform must construct a CEDT CFMWS at boot
+with sufficient resources to support the max possible (or expected) hotplug
+memory capacity. ::
+
+         HB0                 HB1
+      RP0    RP1             RP2
+       |      |               |
+     Empty  Empty            USP
+                      ________|________
+                      |    |    |     |
+                     DSP  DSP  DSP   DSP
+                      |    |    |    |
+                         All  Empty
+
+For example, a BIOS/EFI may expose an option to configure a CEDT CFMWS with
+a pre-configured amount of memory capacity (per host bridge, or host bridge
+interleave set), even if no device is attached to Root Ports or Downstream
+Ports at boot (as depicted in the figure above).
+
+
+Interleave Sets
+===============
+
+Host Bridge Interleave
+----------------------
+Host-bridge interleaved memory regions are defined **statically** in the
+:doc:`CEDT<acpi/cedt>`.  To apply cross-host-bridge interleave, a CFMWS entry
+describing that interleave must have been provided **at boot**.  Hotplugged
+devices cannot add host-bridge interleave capabilities at hotplug time.
+
+See the :doc:`Flexible CEDT Configuration<example-configurations/flexible>`
+example to see how a platform can provide this kind of flexibility regarding
+hotplugged memory devices.  BIOS/EFI software should consider options to
+present flexible CEDT configurations with hotplug support.
+
+HDM Interleave
+--------------
+Decoder-applied interleave can flexibly handle hotplugged devices, as decoders
+can be re-programmed after hotplug.
+
+To add or remove a device to/from an existing HDM-applied interleaved region,
+that region must be torn down an re-created.