arc: introduce arch_zone_limits_init()

Move calculations of zone limits to a dedicated arch_zone_limits_init()
function.

Later MM core will use this function as an architecture specific callback
during nodes and zones initialization and thus there won't be a need to
call free_area_init() from every architecture.

Link: https://lkml.kernel.org/r/20260111082105.290734-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index a73cc94f806e70b689d185ca6c9b073a0bff9549..ff7974d380119163d5aeebcea08914abbbeba62a 100644 (file)
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -75,6 +75,25 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
                base, TO_MB(size), !in_use ? "Not used":"");
 }
 
+void __init arch_zone_limits_init(unsigned long *max_zone_pfn)
+{
+       /*----------------- node/zones setup --------------------------*/
+       max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
+
+#ifdef CONFIG_HIGHMEM
+       /*
+        * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+        * For HIGHMEM without PAE max_high_pfn should be less than
+        * min_low_pfn to guarantee that these two regions don't overlap.
+        * For PAE case highmem is greater than lowmem, so it is natural
+        * to use max_high_pfn.
+        *
+        * In both cases, holes should be handled by pfn_valid().
+        */
+       max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
+#endif
+}
+
 /*
  * First memory setup routine called from setup_arch()
  * 1. setup swapper's mm @init_mm
@@ -122,9 +141,6 @@ void __init setup_arch_memory(void)
 
        memblock_dump_all();
 
-       /*----------------- node/zones setup --------------------------*/
-       max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
-
 #ifdef CONFIG_HIGHMEM
        /*
         * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
@@ -139,21 +155,11 @@ void __init setup_arch_memory(void)
        min_high_pfn = PFN_DOWN(high_mem_start);
        max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
 
-       /*
-        * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
-        * For HIGHMEM without PAE max_high_pfn should be less than
-        * min_low_pfn to guarantee that these two regions don't overlap.
-        * For PAE case highmem is greater than lowmem, so it is natural
-        * to use max_high_pfn.
-        *
-        * In both cases, holes should be handled by pfn_valid().
-        */
-       max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
-
        arch_pfn_offset = min(min_low_pfn, min_high_pfn);
        kmap_init();
 #endif /* CONFIG_HIGHMEM */
 
+       arch_zone_limits_init(max_zone_pfn);
        free_area_init(max_zone_pfn);
 }