dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types

Update the bindings to allow setting per-line interrupt-types.

Some Interrupt Router instances can only work with a specific trigger
type (edge or level), while others act as simple passthroughs that
preserve the source interrupt type unchanged.

Make "ti,intr-trigger-type" property optional, with its absence
indicating that the router acts as a passthrough. When absent,
"#interrupt-cells" must be 2 to allow each interrupt source to specify
its trigger type per-line.

Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260123-ul-driver-i2c-j722s-v4-1-b08625c487d5@ti.com

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
index c99cc7323c711de6bada10ed3adb8078d88d003a..de45f0c4b1d1641a08279d074b30fdab880099cd 100644 (file)
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
@@ -15,8 +15,7 @@ allOf:
 description: |
   The Interrupt Router (INTR) module provides a mechanism to mux M
   interrupt inputs to N interrupt outputs, where all M inputs are selectable
-  to be driven per N output. An Interrupt Router can either handle edge
-  triggered or level triggered interrupts and that is fixed in hardware.
+  to be driven per N output.
 
                                    Interrupt Router
                                +----------------------+
@@ -64,9 +63,14 @@ properties:
   interrupt-controller: true
 
   '#interrupt-cells':
-    const: 1
+    enum: [1, 2]
     description: |
-      The 1st cell should contain interrupt router input hw number.
+      Number of cells in interrupt specifier. Depends on ti,intr-trigger-type:
+      - If ti,intr-trigger-type is present: must be 1
+        The 1st cell should contain interrupt router input hw number.
+      - If ti,intr-trigger-type is absent: must be 2
+        The 1st cell should contain interrupt router input hw number.
+        The 2nd cell should contain interrupt trigger type (preserved by router).
 
   ti,interrupt-ranges:
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
@@ -82,9 +86,22 @@ properties:
         - description: |
             "limit" specifies the limit for translation
 
+if:
+  required:
+    - ti,intr-trigger-type
+then:
+  properties:
+    '#interrupt-cells':
+      const: 1
+      description: Interrupt ID only. Interrupt type is specified globally
+else:
+  properties:
+    '#interrupt-cells':
+      const: 2
+      description: Interrupt ID and corresponding interrupt type
+
 required:
   - compatible
-  - ti,intr-trigger-type
   - interrupt-controller
   - '#interrupt-cells'
   - ti,sci
@@ -105,3 +122,14 @@ examples:
         ti,sci-dev-id = <131>;
         ti,interrupt-ranges = <0 360 32>;
     };
+
+  - |
+    interrupt-controller {
+        compatible = "ti,sci-intr";
+        interrupt-controller;
+        interrupt-parent = <&gic500>;
+        #interrupt-cells = <2>;
+        ti,sci = <&dmsc>;
+        ti,sci-dev-id = <131>;
+        ti,interrupt-ranges = <0 360 32>;
+    };