MBO: Add global operating class definitions

Add definitions for global operating classes. These definitions will be
used to construct supported operating classes information element.

The operating classes definitions used locally for P2P module will be
removed and included in the general operating classes definitions.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>

diff --git a/src/common/ieee802_11_common.c b/src/common/ieee802_11_common.c
index 34fa968cc3929cdf7d68e1116eabfe8db115a639..932cb099e45ac68196822cb8aa429b0795785f44 100644 (file)
--- a/src/common/ieee802_11_common.c
+++ b/src/common/ieee802_11_common.c
@@ -1174,6 +1174,46 @@ struct wpabuf * mb_ies_by_info(struct mb_ies_info *info)
 }
 
 
+const struct oper_class_map global_op_class[] = {
+       { HOSTAPD_MODE_IEEE80211G, 81, 1, 13, 1, BW20, P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211G, 82, 14, 14, 1, BW20, NO_P2P_SUPP },
+
+       /* Do not enable HT40 on 2.4 GHz for P2P use for now */
+       { HOSTAPD_MODE_IEEE80211G, 83, 1, 9, 1, BW40PLUS, NO_P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211G, 84, 5, 13, 1, BW40MINUS, NO_P2P_SUPP },
+
+       { HOSTAPD_MODE_IEEE80211A, 115, 36, 48, 4, BW20, P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 116, 36, 44, 8, BW40PLUS, P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 117, 40, 48, 8, BW40MINUS, P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 118, 52, 64, 4, BW20, NO_P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 119, 52, 60, 8, BW40PLUS, NO_P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 120, 56, 64, 8, BW40MINUS, NO_P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 121, 100, 140, 4, BW20, NO_P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 122, 100, 132, 8, BW40PLUS, NO_P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 123, 104, 136, 8, BW40MINUS, NO_P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 124, 149, 161, 4, BW20, P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 125, 149, 169, 4, BW20, P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 126, 149, 157, 8, BW40PLUS, P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 127, 153, 161, 8, BW40MINUS, P2P_SUPP },
+
+       /*
+        * IEEE P802.11ac/D7.0 Table E-4 actually talks about channel center
+        * frequency index 42, 58, 106, 122, 138, 155 with channel spacing of
+        * 80 MHz, but currently use the following definition for simplicity
+        * (these center frequencies are not actual channels, which makes
+        * wpas_p2p_allow_channel() fail). wpas_p2p_verify_80mhz() should take
+        * care of removing invalid channels.
+        */
+       { HOSTAPD_MODE_IEEE80211A, 128, 36, 161, 4, BW80, P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 129, 50, 114, 16, BW160, P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211A, 130, 36, 161, 4, BW80P80, P2P_SUPP },
+       { HOSTAPD_MODE_IEEE80211AD, 180, 1, 4, 1, BW2160, P2P_SUPP },
+       { -1, 0, 0, 0, 0, BW20, NO_P2P_SUPP }
+};
+
+size_t global_op_class_size = ARRAY_SIZE(global_op_class);
+
+
 /**
  * get_ie - Fetch a specified information element from IEs buffer
  * @ies: Information elements buffer

diff --git a/src/common/ieee802_11_common.h b/src/common/ieee802_11_common.h
index b87eeec73ae4a6e6fa8ba74dad2b2c1caf629a02..2ca7abb5c01dabbb8e3c7219615149e7fac5f8a8 100644 (file)
--- a/src/common/ieee802_11_common.h
+++ b/src/common/ieee802_11_common.h
@@ -9,6 +9,8 @@
 #ifndef IEEE802_11_COMMON_H
 #define IEEE802_11_COMMON_H
 
+#include "defs.h"
+
 #define MAX_NOF_MB_IES_SUPPORTED 5
 
 struct mb_ies_info {
@@ -126,6 +128,19 @@ struct wpabuf * mb_ies_by_info(struct mb_ies_info *info);
 
 const char * fc2str(u16 fc);
 
+struct oper_class_map {
+       enum hostapd_hw_mode mode;
+       u8 op_class;
+       u8 min_chan;
+       u8 max_chan;
+       u8 inc;
+       enum { BW20, BW40PLUS, BW40MINUS, BW80, BW2160, BW160, BW80P80 } bw;
+       enum { P2P_SUPP, NO_P2P_SUPP } p2p;
+};
+
+extern const struct oper_class_map global_op_class[];
+extern size_t global_op_class_size;
+
 const u8 * get_ie(const u8 *ies, size_t len, u8 eid);
 
 size_t mbo_add_ie(u8 *buf, size_t len, const u8 *attr, size_t attr_len);

diff --git a/wpa_supplicant/p2p_supplicant.c b/wpa_supplicant/p2p_supplicant.c
index 5f5b91b5935ff2f122a85539a756839a7d0c7278..d2746678ff10819db4100368c69715608558079e 100644 (file)
--- a/wpa_supplicant/p2p_supplicant.c
+++ b/wpa_supplicant/p2p_supplicant.c
@@ -3324,45 +3324,6 @@ static int has_channel(struct wpa_global *global,
 }
 
 
-struct p2p_oper_class_map {
-       enum hostapd_hw_mode mode;
-       u8 op_class;
-       u8 min_chan;
-       u8 max_chan;
-       u8 inc;
-       enum { BW20, BW40PLUS, BW40MINUS, BW80, BW2160, BW160, BW80P80 } bw;
-};
-
-static const struct p2p_oper_class_map op_class[] = {
-       { HOSTAPD_MODE_IEEE80211G, 81, 1, 13, 1, BW20 },
-#if 0 /* Do not enable HT40 on 2 GHz for now */
-       { HOSTAPD_MODE_IEEE80211G, 83, 1, 9, 1, BW40PLUS },
-       { HOSTAPD_MODE_IEEE80211G, 84, 5, 13, 1, BW40MINUS },
-#endif
-       { HOSTAPD_MODE_IEEE80211A, 115, 36, 48, 4, BW20 },
-       { HOSTAPD_MODE_IEEE80211A, 124, 149, 161, 4, BW20 },
-       { HOSTAPD_MODE_IEEE80211A, 125, 149, 169, 4, BW20 },
-       { HOSTAPD_MODE_IEEE80211A, 116, 36, 44, 8, BW40PLUS },
-       { HOSTAPD_MODE_IEEE80211A, 117, 40, 48, 8, BW40MINUS },
-       { HOSTAPD_MODE_IEEE80211A, 126, 149, 157, 8, BW40PLUS },
-       { HOSTAPD_MODE_IEEE80211A, 127, 153, 161, 8, BW40MINUS },
-
-       /*
-        * IEEE P802.11ac/D7.0 Table E-4 actually talks about channel center
-        * frequency index 42, 58, 106, 122, 138, 155 with channel spacing of
-        * 80 MHz, but currently use the following definition for simplicity
-        * (these center frequencies are not actual channels, which makes
-        * has_channel() fail). wpas_p2p_verify_80mhz() should take care of
-        * removing invalid channels.
-        */
-       { HOSTAPD_MODE_IEEE80211A, 128, 36, 161, 4, BW80 },
-       { HOSTAPD_MODE_IEEE80211A, 130, 36, 161, 4, BW80P80 },
-       { HOSTAPD_MODE_IEEE80211A, 129, 50, 114, 16, BW160 },
-       { HOSTAPD_MODE_IEEE80211AD, 180, 1, 4, 1, BW2160 },
-       { -1, 0, 0, 0, 0, BW20 }
-};
-
-
 static int wpas_p2p_get_center_80mhz(struct wpa_supplicant *wpa_s,
                                     struct hostapd_hw_modes *mode,
                                     u8 channel)
@@ -3539,11 +3500,14 @@ static int wpas_p2p_setup_channels(struct wpa_supplicant *wpa_s,
 
        cla = cli_cla = 0;
 
-       for (op = 0; op_class[op].op_class; op++) {
-               const struct p2p_oper_class_map *o = &op_class[op];
+       for (op = 0; global_op_class[op].op_class; op++) {
+               const struct oper_class_map *o = &global_op_class[op];
                u8 ch;
                struct p2p_reg_class *reg = NULL, *cli_reg = NULL;
 
+               if (o->p2p == NO_P2P_SUPP)
+                       continue;
+
                mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, o->mode);
                if (mode == NULL)
                        continue;
@@ -3598,10 +3562,13 @@ int wpas_p2p_get_ht40_mode(struct wpa_supplicant *wpa_s,
        int op;
        enum chan_allowed ret;
 
-       for (op = 0; op_class[op].op_class; op++) {
-               const struct p2p_oper_class_map *o = &op_class[op];
+       for (op = 0; global_op_class[op].op_class; op++) {
+               const struct oper_class_map *o = &global_op_class[op];
                u8 ch;
 
+               if (o->p2p == NO_P2P_SUPP)
+                       continue;
+
                for (ch = o->min_chan; ch <= o->max_chan; ch += o->inc) {
                        if (o->mode != HOSTAPD_MODE_IEEE80211A ||
                            (o->bw != BW40PLUS && o->bw != BW40MINUS) ||