/*
* Generated by bindkeys.pl 1.3.104.2 2010/06/20 23:46:24 tbox Exp
- * From bind.keys 1.5.42.1 2010/06/20 07:32:24 marka Exp
+ * From bind.keys 1.5.42.2 2011/01/04 19:14:48 each Exp
*/
#define TRUSTED_KEYS "\
+# The bind.keys file is used to override built-in DNSSEC trust anchors\n\
+# which are included as part of BIND 9. As of the current release (BIND\n\
+# 9.7), the only trust anchor it sets is the one for the ISC DNSSEC\n\
+# Lookaside Validation zone (\"dlv.isc.org\"). Trust anchors for any other\n\
+# zones MUST be configured elsewhere; if they are configured here, they\n\
+# will not be recognized or used by named.\n\
+#\n\
+# This file also contains a copy of the trust anchor for the DNS root zone\n\
+# (\".\"). However, named does not use it; it is provided here for\n\
+# informational purposes only. To switch on DNSSEC validation at the\n\
+# root, the root key below can be copied into named.conf.\n\
+#\n\
+# The built-in DLV trust anchor in this file is used directly by named.\n\
+# However, it is not activated unless specifically switched on. To use\n\
+# the DLV key, set \"dnssec-lookaside auto;\" in the named.conf options.\n\
+# Without this option being set, the key in this file is ignored.\n\
+#\n\
+# This file is NOT expected to be user-configured.\n\
+#\n\
+# These keys are current as of January 2011. If any key fails to\n\
+# initialize correctly, it may have expired. In that event you should\n\
+# replace this file with a current version. The latest version of\n\
+# bind.keys can always be obtained from ISC at https://www.isc.org/bind-keys.\n\
+\n\
trusted-keys {\n\
- # NOTE: This key is current as of October 2009.\n\
- # If it fails to initialize correctly, it may have expired;\n\
- # see https://www.isc.org/solutions/dlv for a replacement.\n\
- dlv.isc.org. 257 3 5 \"BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2 brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+ 1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5 ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt TDN0YUuWrBNh\";\n\
+ # ISC DLV: See https://www.isc.org/solutions/dlv for details.\n\
+ # NOTE: This key is activated by setting \"dnssec-lookaside auto;\"\n\
+ # in named.conf.\n\
+ dlv.isc.org. 257 3 5 \"BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2\n\
+ brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+\n\
+ 1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5\n\
+ ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk\n\
+ Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM\n\
+ QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt\n\
+ TDN0YUuWrBNh\";\n\
+\n\
+ # ROOT KEY: See https://data.iana.org/root-anchors/root-anchors.xml\n\
+ # for current trust anchor information.\n\
+ # NOTE: This key is activated by setting \"dnssec-validation auto;\"\n\
+ # in named.conf.\n\
+ . initial-key 257 3 8 \"AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjF\n\
+ FVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoX\n\
+ bfDaUeVPQuYEhg37NZWAJQ9VnMVDxP/VHL496M/QZxkjf5/Efucp2gaD\n\
+ X6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEheX7ICJBBtuA6G3LQpz\n\
+ W5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ57relS\n\
+ Qageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulq\n\
+ QxA+Uk1ihz0=\";\n\
};\n\
"
#define MANAGED_KEYS "\
+# The bind.keys file is used to override built-in DNSSEC trust anchors\n\
+# which are included as part of BIND 9. As of the current release (BIND\n\
+# 9.7), the only trust anchor it sets is the one for the ISC DNSSEC\n\
+# Lookaside Validation zone (\"dlv.isc.org\"). Trust anchors for any other\n\
+# zones MUST be configured elsewhere; if they are configured here, they\n\
+# will not be recognized or used by named.\n\
+#\n\
+# This file also contains a copy of the trust anchor for the DNS root zone\n\
+# (\".\"). However, named does not use it; it is provided here for\n\
+# informational purposes only. To switch on DNSSEC validation at the\n\
+# root, the root key below can be copied into named.conf.\n\
+#\n\
+# The built-in DLV trust anchor in this file is used directly by named.\n\
+# However, it is not activated unless specifically switched on. To use\n\
+# the DLV key, set \"dnssec-lookaside auto;\" in the named.conf options.\n\
+# Without this option being set, the key in this file is ignored.\n\
+#\n\
+# This file is NOT expected to be user-configured.\n\
+#\n\
+# These keys are current as of January 2011. If any key fails to\n\
+# initialize correctly, it may have expired. In that event you should\n\
+# replace this file with a current version. The latest version of\n\
+# bind.keys can always be obtained from ISC at https://www.isc.org/bind-keys.\n\
+\n\
managed-keys {\n\
- # NOTE: This key is current as of October 2009.\n\
- # If it fails to initialize correctly, it may have expired;\n\
- # see https://www.isc.org/solutions/dlv for a replacement.\n\
- dlv.isc.org. initial-key 257 3 5 \"BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2 brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+ 1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5 ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt TDN0YUuWrBNh\";\n\
+ # ISC DLV: See https://www.isc.org/solutions/dlv for details.\n\
+ # NOTE: This key is activated by setting \"dnssec-lookaside auto;\"\n\
+ # in named.conf.\n\
+ dlv.isc.org. initial-key 257 3 5 \"BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2\n\
+ brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+\n\
+ 1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5\n\
+ ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk\n\
+ Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM\n\
+ QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt\n\
+ TDN0YUuWrBNh\";\n\
+\n\
+ # ROOT KEY: See https://data.iana.org/root-anchors/root-anchors.xml\n\
+ # for current trust anchor information.\n\
+ # NOTE: This key is activated by setting \"dnssec-validation auto;\"\n\
+ # in named.conf.\n\
+ . initial-key 257 3 8 \"AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjF\n\
+ FVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoX\n\
+ bfDaUeVPQuYEhg37NZWAJQ9VnMVDxP/VHL496M/QZxkjf5/Efucp2gaD\n\
+ X6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEheX7ICJBBtuA6G3LQpz\n\
+ W5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ57relS\n\
+ Qageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulq\n\
+ QxA+Uk1ihz0=\";\n\
};\n\
"