--- /dev/null
+ Common UNIX Printing System License Agreement
+
+ Copyright 2007 by Apple Inc.
+ 1 Infinite Loop
+ Cupertino, CA 95014 USA
+
+ WWW: http://www.cups.org/
+
+
+INTRODUCTION
+
+The Common UNIX Printing System(tm), ("CUPS(tm)"), is provided
+under the GNU General Public License ("GPL") and GNU Library
+General Public License ("LGPL"), Version 2, with exceptions for
+Apple operating systems and the OpenSSL toolkit. A copy of the
+exceptions and licenses follow this introduction.
+
+The GNU LGPL applies to the CUPS and CUPS Imaging libraries
+located in the "cups" and "filter" subdirectories of the CUPS
+source distribution and in the "cups" include directory and
+library files in the binary distributions. The GNU GPL applies to
+the remainder of the CUPS distribution, including the "pdftops"
+filter which is based upon Xpdf.
+
+For those not familiar with the GNU GPL, the license basically
+allows you to:
+
+ - Use the CUPS software at no charge.
+ - Distribute verbatim copies of the software in source or
+ binary form.
+ - Sell verbatim copies of the software for a media fee, or
+ sell support for the software.
+
+What this license *does not* allow you to do is make changes or
+add features to CUPS and then sell a binary distribution without
+source code. You must provide source for any changes or additions
+to the software, and all code must be provided under the GPL or
+LGPL as appropriate. The only exceptions to this are the portions
+of the CUPS software covered by the Apple operating system
+license exceptions outlined later in this license agreement.
+
+The GNU LGPL relaxes the "link-to" restriction, allowing you to
+develop applications that use the CUPS and CUPS Imaging libraries
+under other licenses and/or conditions as appropriate for your
+application, driver, or filter.
+
+
+LICENSE EXCEPTIONS
+
+In addition, as the copyright holder of CUPS, Apple Inc. grants
+the following special exceptions:
+
+ 1. Apple Operating System Development License Exception;
+
+ a. Software that is developed by any person or entity
+ for an Apple Operating System ("Apple OS-Developed
+ Software"), including but not limited to Apple and
+ third party printer drivers, filters, and backends
+ for an Apple Operating System, that is linked to the
+ CUPS imaging library or based on any sample filters
+ or backends provided with CUPS shall not be
+ considered to be a derivative work or collective work
+ based on the CUPS program and is exempt from the
+ mandatory source code release clauses of the GNU GPL.
+ You may therefore distribute linked combinations of
+ the CUPS imaging library with Apple OS-Developed
+ Software without releasing the source code of the
+ Apple OS-Developed Software. You may also use sample
+ filters and backends provided with CUPS to develop
+ Apple OS-Developed Software without releasing the
+ source code of the Apple OS-Developed Software.
+
+ b. An Apple Operating System means any operating system
+ software developed and/or marketed by Apple Computer,
+ Inc., including but not limited to all existing
+ releases and versions of Apple's Darwin, Mac OS X,
+ and Mac OS X Server products and all follow-on
+ releases and future versions thereof.
+
+ c. This exception is only available for Apple
+ OS-Developed Software and does not apply to software
+ that is distributed for use on other operating
+ systems.
+
+ d. All CUPS software that falls under this license
+ exception have the following text at the top of each
+ source file:
+
+ This file is subject to the Apple OS-Developed
+ Software exception.
+
+ 2. OpenSSL Toolkit License Exception;
+
+ a. Apple Inc. explicitly allows the compilation and
+ distribution of the CUPS software with the OpenSSL
+ Toolkit.
+
+No developer is required to provide these exceptions in a
+derived work.
+
+
+KERBEROS SUPPORT CODE
+
+The Kerberos support code ("KSC") is copyright 2006 by Jelmer
+Vernooij and is provided 'as-is', without any express or implied
+warranty. In no event will the author or Apple Inc. be held
+liable for any damages arising from the use of the KSC.
+
+Sources files containing KSC have the following text at the top
+of each source file:
+
+ This file contains Kerberos support code, copyright 2006 by
+ Jelmer Vernooij.
+
+The KSC copyright and license apply only to Kerberos-related
+feature code in CUPS. Such code is typically conditionally
+compiled based on the present of the HAVE_GSSAPI preprocessor
+definition.
+
+Permission is granted to anyone to use the KSC for any purpose,
+including commercial applications, and to alter it and
+redistribute it freely, subject to the following restrictions:
+
+ 1. The origin of the KSC must not be misrepresented; you
+ must not claim that you wrote the original software. If
+ you use the KSC in a product, an acknowledgment in the
+ product documentation would be appreciated but is not
+ required.
+
+ 2. Altered source versions must be plainly marked as such,
+ and must not be misrepresented as being the original
+ software.
+
+ 3. This notice may not be removed or altered from any source
+ distribution.
+
+
+TRADEMARKS
+
+Apple Inc. has trademarked the Common UNIX Printing System, CUPS,
+and CUPS logo. You may use these names and logos in any direct port
+or binary distribution of CUPS. Please contact Apple Inc. for written
+permission to use them in derivative products. Our intention is to
+protect the value of these trademarks and ensure that any derivative
+product meets the same high-quality standards as the original.
+\f
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+\f
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+\f
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+\f
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+\f
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ Appendix: How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) 19yy <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19yy name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
+\f
+ GNU LIBRARY GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ [This is the first released version of the library GPL. It is
+ numbered 2 because it goes with version 2 of the ordinary GPL.]
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+ This license, the Library General Public License, applies to some
+specially designated Free Software Foundation software, and to any
+other libraries whose authors decide to use it. You can use it for
+your libraries, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if
+you distribute copies of the library, or if you modify it.
+
+ For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you. You must make sure that they, too, receive or can get the source
+code. If you link a program with the library, you must provide
+complete object files to the recipients so that they can relink them
+with the library, after making changes to the library and recompiling
+it. And you must show them these terms so they know their rights.
+
+ Our method of protecting your rights has two steps: (1) copyright
+the library, and (2) offer you this license which gives you legal
+permission to copy, distribute and/or modify the library.
+
+ Also, for each distributor's protection, we want to make certain
+that everyone understands that there is no warranty for this free
+library. If the library is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original
+version, so that any problems introduced by others will not reflect on
+the original authors' reputations.
+\f
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that companies distributing free
+software will individually obtain patent licenses, thus in effect
+transforming the program into proprietary software. To prevent this,
+we have made it clear that any patent must be licensed for everyone's
+free use or not licensed at all.
+
+ Most GNU software, including some libraries, is covered by the ordinary
+GNU General Public License, which was designed for utility programs. This
+license, the GNU Library General Public License, applies to certain
+designated libraries. This license is quite different from the ordinary
+one; be sure to read it in full, and don't assume that anything in it is
+the same as in the ordinary license.
+
+ The reason we have a separate public license for some libraries is that
+they blur the distinction we usually make between modifying or adding to a
+program and simply using it. Linking a program with a library, without
+changing the library, is in some sense simply using the library, and is
+analogous to running a utility program or application program. However, in
+a textual and legal sense, the linked executable is a combined work, a
+derivative of the original library, and the ordinary General Public License
+treats it as such.
+
+ Because of this blurred distinction, using the ordinary General
+Public License for libraries did not effectively promote software
+sharing, because most developers did not use the libraries. We
+concluded that weaker conditions might promote sharing better.
+
+ However, unrestricted linking of non-free programs would deprive the
+users of those programs of all benefit from the free status of the
+libraries themselves. This Library General Public License is intended to
+permit developers of non-free programs to use free libraries, while
+preserving your freedom as a user of such programs to change the free
+libraries that are incorporated in them. (We have not seen how to achieve
+this as regards changes in header files, but we have achieved it as regards
+changes in the actual functions of the Library.) The hope is that this
+will lead to faster development of free libraries.
+
+ The precise terms and conditions for copying, distribution and
+modification follow. Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library". The
+former contains code derived from the library, while the latter only
+works together with the library.
+
+ Note that it is possible for a library to be covered by the ordinary
+General Public License rather than by this special one.
+\f
+ GNU LIBRARY GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License Agreement applies to any software library which
+contains a notice placed by the copyright holder or other authorized
+party saying it may be distributed under the terms of this Library
+General Public License (also called "this License"). Each licensee is
+addressed as "you".
+
+ A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+ The "Library", below, refers to any such software library or work
+which has been distributed under these terms. A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language. (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+ "Source code" for a work means the preferred form of the work for
+making modifications to it. For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+ Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it). Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+ 1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+ You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+\f
+ 2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) The modified work must itself be a software library.
+
+ b) You must cause the files modified to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ c) You must cause the whole of the work to be licensed at no
+ charge to all third parties under the terms of this License.
+
+ d) If a facility in the modified Library refers to a function or a
+ table of data to be supplied by an application program that uses
+ the facility, other than as an argument passed when the facility
+ is invoked, then you must make a good faith effort to ensure that,
+ in the event an application does not supply such function or
+ table, the facility still operates, and performs whatever part of
+ its purpose remains meaningful.
+
+ (For example, a function in a library to compute square roots has
+ a purpose that is entirely well-defined independent of the
+ application. Therefore, Subsection 2d requires that any
+ application-supplied function or table used by this function must
+ be optional: if the application does not supply it, the square
+ root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library. To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License. (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.) Do not make any other change in
+these notices.
+\f
+ Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+ This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+ 4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+ If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library". Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+ However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library". The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+ When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library. The
+threshold for this to be true is not precisely defined by law.
+
+ If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work. (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+ Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+\f
+ 6. As an exception to the Sections above, you may also compile or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+ You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License. You must supply a copy of this License. If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License. Also, you must do one
+of these things:
+
+ a) Accompany the work with the complete corresponding
+ machine-readable source code for the Library including whatever
+ changes were used in the work (which must be distributed under
+ Sections 1 and 2 above); and, if the work is an executable linked
+ with the Library, with the complete machine-readable "work that
+ uses the Library", as object code and/or source code, so that the
+ user can modify the Library and then relink to produce a modified
+ executable containing the modified Library. (It is understood
+ that the user who changes the contents of definitions files in the
+ Library will not necessarily be able to recompile the application
+ to use the modified definitions.)
+
+ b) Accompany the work with a written offer, valid for at
+ least three years, to give the same user the materials
+ specified in Subsection 6a, above, for a charge no more
+ than the cost of performing this distribution.
+
+ c) If distribution of the work is made by offering access to copy
+ from a designated place, offer equivalent access to copy the above
+ specified materials from the same place.
+
+ d) Verify that the user has already received a copy of these
+ materials or that you have already sent this user a copy.
+
+ For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it. However, as a special exception,
+the source code distributed need not include anything that is normally
+distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+ It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system. Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+\f
+ 7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+ a) Accompany the combined library with a copy of the same work
+ based on the Library, uncombined with any other library
+ facilities. This must be distributed under the terms of the
+ Sections above.
+
+ b) Give prominent notice with the combined library of the fact
+ that part of it is a work based on the Library, and explaining
+ where to find the accompanying uncombined form of the same work.
+
+ 8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License. Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License. However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+ 9. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Library or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+ 10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+\f
+ 11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all. For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded. In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+ 13. The Free Software Foundation may publish revised and/or new
+versions of the Library General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation. If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+\f
+ 14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission. For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this. Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+ NO WARRANTY
+
+ 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ Appendix: How to Apply These Terms to Your New Libraries
+
+ If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change. You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+ To apply these terms, attach the following notices to the library. It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the library's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Library General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this library; if not, write to the Free
+ Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the
+ library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+ <signature of Ty Coon>, 1 April 1990
+ Ty Coon, President of Vice
+
+That's all there is to it!
--- /dev/null
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.61.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+if test "x$CONFIG_SHELL" = x; then
+ if (eval ":") 2>/dev/null; then
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+
+ if test $as_have_required = yes && (eval ":
+(as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=\$LINENO
+ as_lineno_2=\$LINENO
+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+ :
+else
+ as_candidate_shells=
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ case $as_dir in
+ /*)
+ for as_base in sh bash ksh sh5; do
+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ done;;
+ esac
+done
+IFS=$as_save_IFS
+
+
+ for as_shell in $as_candidate_shells $SHELL; do
+ # Try only shells that exist, to save several forks.
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+ CONFIG_SHELL=$as_shell
+ as_have_required=yes
+ if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+ (exit $1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+ break
+fi
+
+fi
+
+ done
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ done
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+ if test $as_have_required = no; then
+ echo This script requires a shell more modern than all the
+ echo shells that I found on your system. Please install a
+ echo modern shell, or manually run the script under such a
+ echo shell if you do have one.
+ { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+ echo Please tell autoconf@gnu.org about your system,
+ echo including any error possibly output before this
+ echo message
+}
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+exec 7<&0 </dev/null 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+
+ac_unique_file="Makefile.in"
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+CPPFLAGS
+ac_ct_CC
+EXEEXT
+OBJEXT
+RM
+LIBOBJS
+LTLIBOBJS'
+ac_subst_files=''
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute directory names.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ { echo "$as_me: error: Working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ { echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$0" ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+ { (exit 1); exit 1; }; }
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-debug turn on debugging, default=no
+ --disable-largefile omit support for large files
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" || continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.61
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.61. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args '$ac_arg'"
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -n "$CONFIG_SITE"; then
+ set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+ set x "$ac_default_prefix/share/config.site" \
+ "$ac_default_prefix/etc/config.site"
+fi
+shift
+for ac_site_file
+do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+#
+# "$Id: compiler.m4 142 2006-08-17 14:50:46Z mike $"
+#
+# Common compiler stuff for autoconf...
+#
+
+CFLAGS="${CFLAGS:=}"
+LDFLAGS="${LDFLAGS:=}"
+LIBS="${LIBS:=}"
+
+# Check whether --enable-debug was given.
+if test "${enable_debug+set}" = set; then
+ enableval=$enable_debug; if test x$enable_debug = xyes; then
+ CFLAGS="-g $CFLAGS"
+ LDFLAGS="-g $LDFLAGS"
+ fi
+fi
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO: checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+#
+# List of possible output files, starting from the most likely.
+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+# only as a last resort. b.out is created by i960 compilers.
+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+#
+# The IRIX 6 linker writes into existing files which may not be
+# executable, retaining their permissions. Remove them first so a
+# subsequent execution test works.
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+
+{ echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6; }
+if test -z "$ac_file"; then
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+fi
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6; }
+
+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_compiler_gnu=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ CFLAGS=""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c89=$ac_arg
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+ xno)
+ { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+# Extract the first word of "rm", so it can be a program name with args.
+set dummy rm; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_path_RM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $RM in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_RM="$RM" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_RM="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+RM=$ac_cv_path_RM
+if test -n "$RM"; then
+ { echo "$as_me:$LINENO: result: $RM" >&5
+echo "${ECHO_T}$RM" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+
+
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then
+ enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+ { echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5
+echo $ECHO_N "checking for special C compiler options needed for large files... $ECHO_C" >&6; }
+if test "${ac_cv_sys_largefile_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_sys_largefile_CC=no
+ if test "$GCC" != yes; then
+ ac_save_CC=$CC
+ while :; do
+ # IRIX 6.2 and later do not support large files by default,
+ # so use the C compiler's -n32 option if that helps.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext
+ CC="$CC -n32"
+ rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_sys_largefile_CC=' -n32'; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext
+ break
+ done
+ CC=$ac_save_CC
+ rm -f conftest.$ac_ext
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5
+echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6; }
+ if test "$ac_cv_sys_largefile_CC" != no; then
+ CC=$CC$ac_cv_sys_largefile_CC
+ fi
+
+ { echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6; }
+if test "${ac_cv_sys_file_offset_bits+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_sys_file_offset_bits=no; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_sys_file_offset_bits=64; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_file_offset_bits=unknown
+ break
+done
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5
+echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -f conftest*
+ if test $ac_cv_sys_file_offset_bits = unknown; then
+ { echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5
+echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6; }
+if test "${ac_cv_sys_large_files+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_sys_large_files=no; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_sys_large_files=1; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_large_files=unknown
+ break
+done
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5
+echo "${ECHO_T}$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -f conftest*
+ fi
+fi
+
+
+if test -n "$GCC"; then
+ CFLAGS="-Wshadow -Winline $CFLAGS"
+ CFLAGS="-Wall -Wunused -Wno-char-subscripts -Wno-format-y2k $CFLAGS"
+fi
+
+
+#
+# End of "$Id: compiler.m4 142 2006-08-17 14:50:46Z mike $".
+#
+
+
+{ echo "$as_me:$LINENO: checking for library containing socket" >&5
+echo $ECHO_N "checking for library containing socket... $ECHO_C" >&6; }
+if test "${ac_cv_search_socket+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char socket ();
+int
+main ()
+{
+return socket ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' socket; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ ac_cv_search_socket=$ac_res
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext
+ if test "${ac_cv_search_socket+set}" = set; then
+ break
+fi
+done
+if test "${ac_cv_search_socket+set}" = set; then
+ :
+else
+ ac_cv_search_socket=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_search_socket" >&5
+echo "${ECHO_T}$ac_cv_search_socket" >&6; }
+ac_res=$ac_cv_search_socket
+if test "$ac_res" != no; then
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+{ echo "$as_me:$LINENO: checking for library containing gethostbyname" >&5
+echo $ECHO_N "checking for library containing gethostbyname... $ECHO_C" >&6; }
+if test "${ac_cv_search_gethostbyname+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gethostbyname ();
+int
+main ()
+{
+return gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' nsl; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ ac_cv_search_gethostbyname=$ac_res
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext
+ if test "${ac_cv_search_gethostbyname+set}" = set; then
+ break
+fi
+done
+if test "${ac_cv_search_gethostbyname+set}" = set; then
+ :
+else
+ ac_cv_search_gethostbyname=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_search_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_search_gethostbyname" >&6; }
+ac_res=$ac_cv_search_gethostbyname
+if test "$ac_res" != no; then
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+t clear
+:clear
+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+ g
+ s/^\n//
+ s/\n/ /g
+ p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+
+# Save the log message, to keep $[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.61. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+# Files that config.status was made for.
+config_files="$ac_config_files"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.61,
+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2006 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --he | --h | --help | --hel | -h )
+ echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ CONFIG_SHELL=$SHELL
+ export CONFIG_SHELL
+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+#
+# Set up the sed scripts for CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+CC!$CC$ac_delim
+CFLAGS!$CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+CPPFLAGS!$CPPFLAGS$ac_delim
+ac_ct_CC!$ac_ct_CC$ac_delim
+EXEEXT!$EXEEXT$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+RM!$RM$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 47; then
+ break
+ elif $ac_last_try; then
+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+ ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
+_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in :F $CONFIG_FILES
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ ac_file_inputs="$ac_file_inputs $ac_f"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input="Generated from "`IFS=:
+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ fi
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin";;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir="$ac_dir"
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out"; rm -f "$tmp/out";;
+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+ esac
+ ;;
+
+
+
+ esac
+
+done # for ac_tag
+
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+
+
+#
+# End of "$Id: configure.in 7095 2007-11-30 22:36:46Z mike $".
+#
projects / thirdparty / cups.git / commitdiff
