tty/serial: at91: maxburst was missing for dma transfers

commit a8d4e01637902311c5643b69a5c80e2805f04054 upstream.

Maxburst was not set when doing the dma slave configuration. This value
is checked by the recently introduced xdmac. It causes an error when
doing the slave configuration and so prevents from using dma.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 4e959c43f6804d12f8677d916e1f050bdc740457..6afce7eb3d74b689880a19b53c0a4b70f43244e4 100644 (file)
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -880,6 +880,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
        config.direction = DMA_MEM_TO_DEV;
        config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
        config.dst_addr = port->mapbase + ATMEL_US_THR;
+       config.dst_maxburst = 1;
 
        ret = dmaengine_slave_config(atmel_port->chan_tx,
                                     &config);
@@ -1059,6 +1060,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
        config.direction = DMA_DEV_TO_MEM;
        config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
        config.src_addr = port->mapbase + ATMEL_US_RHR;
+       config.src_maxburst = 1;
 
        ret = dmaengine_slave_config(atmel_port->chan_rx,
                                     &config);