--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+ compatible = "tplink,archer-ax80-v1", "mediatek,mt7986a";
+ model = "TP-Link Archer AX80V1";
+
+ aliases {
+ serial0 = &uart0;
+ led-boot = &led_B;
+ led-failsafe = &led_R;
+ led-running = &led_B;
+ led-upgrade = &led_G;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ reg = <0 0x40000000 0 0x20000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ button-ledswitch {
+ label = "ledswitch";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wifi {
+ label = "wlan";
+ linux,code = <KEY_WLAN>;
+ gpios = <&pio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&auxadc {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "2500base-x";
+ phy-handle = <&phy6>;
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <1500000>;
+ reset-post-delay-us = <1000000>;
+
+ phy6: phy@6 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <6>;
+ };
+
+ switch@1f {
+ compatible = "mediatek,mt7531";
+ reg = <31>;
+ reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ lp55231: led-controller@32 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,lp55231";
+ reg = <0x32>;
+ status = "okay";
+ clock-mode = /bits/ 8 <1>;
+
+ led_B: led@0 {
+ chan-name = "B";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ reg = <0>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led_G: led@3 {
+ chan-name = "G";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ reg = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_R: led@6 {
+ chan-name = "R";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ reg = <6>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ };
+};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_flash_pins>;
+ status = "okay";
+
+ spi_nand_flash: flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+
+ spi-max-frequency = <52000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+
+ spi-cal-enable;
+ spi-cal-mode = "read-data";
+ spi-cal-datalen = <7>;
+ spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>;
+ spi-cal-addrlen = <5>;
+ spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x200000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "u-boot-env";
+ reg = <0x200000 0x100000>;
+ };
+
+ partition@300000 {
+ label = "ubi0";
+ reg = <0x300000 0x3200000>;
+ };
+
+ partition@3500000 {
+ label = "ubi1";
+ reg = <0x3500000 0x3200000>;
+ };
+
+ partition@6700000 {
+ label = "userconfig";
+ reg = <0x6700000 0x800000>;
+ };
+
+ factory:partition@6f00000 {
+ label = "tp_data";
+ reg = <0x6f00000 0x400000>;
+ };
+
+ partition@7300000 {
+ label = "mali_data";
+ reg = <0x7300000 0x800000>;
+ };
+ };
+ };
+};
+
+&pio {
+ spi_flash_pins: spi-flash-pins-33-to-38 {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ conf-pu {
+ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+ drive-strength = <8>;
+ mediatek,pull-up-adv = <0>; /* bias-disable */
+ };
+ conf-pd {
+ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+ drive-strength = <8>;
+ mediatek,pull-down-adv = <0>; /* bias-disable */
+ };
+ };
+ wf_2g_5g_pins: wf_2g_5g-pins {
+ mux {
+ function = "wifi";
+ groups = "wf_2g", "wf_5g";
+ };
+ conf {
+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+ "WF1_TOP_CLK", "WF1_TOP_DATA";
+ drive-strength = <4>;
+ };
+ };
+};
+
+&trng {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&ssusb {
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_5v>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wf_2g_5g_pins>;
+};
projects / thirdparty / openwrt.git / commitdiff
