ipq40xx: wpj419: use reset-gpios property for phy reset

The old GPIO based phy reset (phy-reset-gpio) will be removed form
the ipq40xx mdio driver in the future.

Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>

diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
index b6eb99278b67c31ef2ad9f7da776d84e4a86aa2e..e75d07606ad9f89588787e80a333cc3e4df1c4ff 100644 (file)
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
@@ -236,9 +236,10 @@
 
                mdio@90000 {
                        status = "okay";
-                       phy-reset-gpio = <&tlmm 47 0>;
                        pinctrl-0 = <&mdio_pins>;
                        pinctrl-names = "default";
+                       reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+                       reset-delay-us = <5000>;
                };
 
                ess-psgmii@98000 {