regulator: bd71828: rename IC specific entities

The new ROHM BD72720 PMIC has similarities with the BD71828. It makes
sense to support the regulator control for both PMICs using the same
driver. It is often more clear to have the IC specific functions and
globals named starting with the chip-name. So, as a preparatory step,
prefix the BD71828 specific functions and globals with the bd71828.

It would be tempting to try also removing the chip ID from those
functions which will be common for both PMICs. I have bad experiences on
this as it tends to lead to problems when yet another IC is being
supported with the same driver, and we will have some functions used for
all, some for two of the three, and some for just one. At this point
I used to start inventing wildcards like BD718XX or BD7272X. This
approach is pretty much always failing as we tend to eventually have
something like BD73900 - where all the wildcard stuff will break down.

So, my approach these days is to:
 - keep the original chip-id prefix for anything that had it already
   (and avoid the churn).
 - use same prefix for all things that are used by multiple ICs -
   typically the chip-ID of the first chip. This typically matches also
   the driver and file names.
 - use specific chip-ID as a prefix for anything which is specific to
   just one chip.

As a preparatory step to adding the BD72720, add bd71828 prefix to all
commonly usable functions and globals.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/df5c98c6392c3b52cd41e3d98d60b65a1585b2dd.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

diff --git a/drivers/regulator/bd71828-regulator.c b/drivers/regulator/bd71828-regulator.c
index 87de87793fa18f7aabe8b03b475fd5d8bdb97504..8c006bff89a8f3bd83249f5a0527d33121816311 100644 (file)
--- a/drivers/regulator/bd71828-regulator.c
+++ b/drivers/regulator/bd71828-regulator.c
@@ -28,7 +28,7 @@ struct bd71828_regulator_data {
        int reg_init_amnt;
 };
 
-static const struct reg_init buck1_inits[] = {
+static const struct reg_init bd71828_buck1_inits[] = {
        /*
         * DVS Buck voltages can be changed by register values or via GPIO.
         * Use register accesses by default.
@@ -40,7 +40,7 @@ static const struct reg_init buck1_inits[] = {
        },
 };
 
-static const struct reg_init buck2_inits[] = {
+static const struct reg_init bd71828_buck2_inits[] = {
        {
                .reg = BD71828_REG_PS_CTRL_1,
                .mask = BD71828_MASK_DVS_BUCK2_CTRL,
@@ -48,7 +48,7 @@ static const struct reg_init buck2_inits[] = {
        },
 };
 
-static const struct reg_init buck6_inits[] = {
+static const struct reg_init bd71828_buck6_inits[] = {
        {
                .reg = BD71828_REG_PS_CTRL_1,
                .mask = BD71828_MASK_DVS_BUCK6_CTRL,
@@ -56,7 +56,7 @@ static const struct reg_init buck6_inits[] = {
        },
 };
 
-static const struct reg_init buck7_inits[] = {
+static const struct reg_init bd71828_buck7_inits[] = {
        {
                .reg = BD71828_REG_PS_CTRL_1,
                .mask = BD71828_MASK_DVS_BUCK7_CTRL,
@@ -102,9 +102,9 @@ static int buck_set_hw_dvs_levels(struct device_node *np,
        return rohm_regulator_set_dvs_levels(&data->dvs, np, desc, cfg->regmap);
 }
 
-static int ldo6_parse_dt(struct device_node *np,
-                        const struct regulator_desc *desc,
-                        struct regulator_config *cfg)
+static int bd71828_ldo6_parse_dt(struct device_node *np,
+                                const struct regulator_desc *desc,
+                                struct regulator_config *cfg)
 {
        int ret, i;
        uint32_t uv = 0;
@@ -212,8 +212,8 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
                         */
                        .lpsr_on_mask = BD71828_MASK_LPSR_EN,
                },
-               .reg_inits = buck1_inits,
-               .reg_init_amnt = ARRAY_SIZE(buck1_inits),
+               .reg_inits = bd71828_buck1_inits,
+               .reg_init_amnt = ARRAY_SIZE(bd71828_buck1_inits),
        },
        {
                .desc = {
@@ -253,8 +253,8 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
                        .lpsr_reg = BD71828_REG_BUCK2_SUSP_VOLT,
                        .lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
                },
-               .reg_inits = buck2_inits,
-               .reg_init_amnt = ARRAY_SIZE(buck2_inits),
+               .reg_inits = bd71828_buck2_inits,
+               .reg_init_amnt = ARRAY_SIZE(bd71828_buck2_inits),
        },
        {
                .desc = {
@@ -399,8 +399,8 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
                        .lpsr_reg = BD71828_REG_BUCK6_SUSP_VOLT,
                        .lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
                },
-               .reg_inits = buck6_inits,
-               .reg_init_amnt = ARRAY_SIZE(buck6_inits),
+               .reg_inits = bd71828_buck6_inits,
+               .reg_init_amnt = ARRAY_SIZE(bd71828_buck6_inits),
        },
        {
                .desc = {
@@ -440,8 +440,8 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
                        .lpsr_reg = BD71828_REG_BUCK7_SUSP_VOLT,
                        .lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
                },
-               .reg_inits = buck7_inits,
-               .reg_init_amnt = ARRAY_SIZE(buck7_inits),
+               .reg_inits = bd71828_buck7_inits,
+               .reg_init_amnt = ARRAY_SIZE(bd71828_buck7_inits),
        },
        {
                .desc = {
@@ -633,7 +633,7 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
                         * LDO6 only supports enable/disable for all states.
                         * Voltage for LDO6 is fixed.
                         */
-                       .of_parse_cb = ldo6_parse_dt,
+                       .of_parse_cb = bd71828_ldo6_parse_dt,
                },
        }, {
                .desc = {