/sbin/kmodloader
[ ! -f /etc/config/wireless ] && {
- # compat for brcm47xx and mvebu
+ # compat for bcm47xx and mvebu
sleep 1
}
CATEGORY:=Kernel modules
DEPENDS:=@(PACKAGE_kmod-brcm-wl||PACKAGE_kmod-brcm-wl-mini)
SUBMENU:=Proprietary BCM43xx WiFi driver
- SUBMENUDEP:=(TARGET_brcm47xx||TARGET_brcm63xx)
+ SUBMENUDEP:=(TARGET_bcm47xx||TARGET_brcm63xx)
endef
define KernelPackage/brcm-wl/Default
$(call Package/broadcom-wl/Default)
SECTION:=kernel
- DEPENDS:=@(TARGET_brcm47xx||TARGET_brcm63xx) +wireless-tools
+ DEPENDS:=@(TARGET_bcm47xx||TARGET_brcm63xx) +wireless-tools
TITLE:=Kernel driver for BCM43xx chipsets
FILES:=$(PKG_BUILD_DIR)/driver$(1)/wl.ko $(PKG_BUILD_DIR)/glue/wl_glue.ko
AUTOLOAD:=$(call AutoProbe,wl)
define KernelPackage/b44
TITLE:=Broadcom 44xx driver
KCONFIG:=CONFIG_B44
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx_mips74k +!TARGET_brcm47xx:kmod-ssb +kmod-mii +kmod-libphy
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx_mips74k +!TARGET_bcm47xx:kmod-ssb +kmod-mii +kmod-libphy
SUBMENU:=$(NETWORK_DEVICES_MENU)
FILES:=$(LINUX_DIR)/drivers/net/ethernet/broadcom/b44.ko
AUTOLOAD:=$(call AutoLoad,19,b44,1)
TITLE:=Broadcom Tigon3 Gigabit Ethernet
KCONFIG:=CONFIG_TIGON3 \
CONFIG_TIGON3_HWMON=n
- DEPENDS:=+!TARGET_brcm47xx:kmod-libphy +kmod-ptp
+ DEPENDS:=+!TARGET_bcm47xx:kmod-libphy +kmod-ptp
SUBMENU:=$(NETWORK_DEVICES_MENU)
FILES:=$(LINUX_DIR)/drivers/net/ethernet/broadcom/tg3.ko
AUTOLOAD:=$(call AutoLoad,19,tg3,1)
define KernelPackage/ssb
SUBMENU:=$(OTHER_MENU)
TITLE:=Silicon Sonics Backplane glue code
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_brcm63xx
KCONFIG:=\
CONFIG_SSB \
CONFIG_SSB_B43_PCI_BRIDGE=y \
define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
TITLE:=BCMA support
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm53xx
KCONFIG:=\
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
TITLE:=Support for OHCI controllers
DEPENDS:= \
+TARGET_bcm53xx:kmod-usb-bcma \
- +TARGET_brcm47xx:kmod-usb-bcma \
- +TARGET_brcm47xx:kmod-usb-ssb
+ +TARGET_bcm47xx:kmod-usb-bcma \
+ +TARGET_bcm47xx:kmod-usb-ssb
KCONFIG:= \
CONFIG_USB_OHCI \
CONFIG_USB_OHCI_HCD \
define KernelPackage/usb-bcma
TITLE:=Support for BCMA USB controllers
- DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx||TARGET_bcm53xx
+ DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx||TARGET_bcm53xx
HIDDEN:=1
KCONFIG:=CONFIG_USB_HCD_BCMA
FILES:= \
define KernelPackage/usb-ssb
TITLE:=Support for SSB USB controllers
- DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx
+ DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx
HIDDEN:=1
KCONFIG:=CONFIG_USB_HCD_SSB
FILES:= \
define KernelPackage/usb2
TITLE:=Support for USB2 controllers
DEPENDS:=\
- +TARGET_brcm47xx:kmod-usb-bcma \
- +TARGET_brcm47xx:kmod-usb-ssb \
+ +TARGET_bcm47xx:kmod-usb-bcma \
+ +TARGET_bcm47xx:kmod-usb-ssb \
+TARGET_bcm53xx:kmod-usb-bcma \
+TARGET_bcm53xx:kmod-phy-bcm-ns-usb2 \
+TARGET_ath79:kmod-phy-ath79-usb \
config PACKAGE_B43_USE_SSB
select PACKAGE_kmod-ssb
tristate
- depends on !TARGET_brcm47xx && !TARGET_brcm63xx
+ depends on !TARGET_bcm47xx && !TARGET_brcm63xx
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
config PACKAGE_B43_USE_BCMA
select PACKAGE_kmod-bcma
tristate
- depends on !TARGET_brcm47xx && !TARGET_bcm53xx
+ depends on !TARGET_bcm47xx && !TARGET_bcm53xx
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
config B43_FW_SQUASH_COREREVS
string "Core revisions to include"
depends on B43_FW_SQUASH
- default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
- default "16,28,29,30" if TARGET_brcm47xx_mips74k
+ default "5,6,7,8,9,10,11,13,15" if TARGET_bcm47xx_legacy
+ default "16,28,29,30" if TARGET_bcm47xx_mips74k
default "5,6,7,8,9,10,11,13,15,16,28,29,30"
help
This is a comma seperated list of core revision numbers.
config B43_FW_SQUASH_PHYTYPES
string "PHY types to include"
depends on B43_FW_SQUASH
- default "G,N,LP" if TARGET_brcm47xx_legacy
- default "N,HT" if TARGET_brcm47xx_mips74k
+ default "G,N,LP" if TARGET_bcm47xx_legacy
+ default "N,HT" if TARGET_bcm47xx_mips74k
default "G,N,LP,HT"
help
This is a comma seperated list of PHY types:
This allows choosing buses that b43 should support.
config PACKAGE_B43_BUSES_BCMA_AND_SSB
- depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+ depends on !TARGET_bcm47xx_legacy && !TARGET_bcm47xx_mips74k && !TARGET_bcm53xx
bool "BCMA and SSB"
config PACKAGE_B43_BUSES_BCMA
- depends on !TARGET_brcm47xx_legacy
+ depends on !TARGET_bcm47xx_legacy
bool "BCMA only"
config PACKAGE_B43_BUSES_SSB
- depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+ depends on !TARGET_bcm47xx_mips74k && !TARGET_bcm53xx
bool "SSB only"
endchoice
config PACKAGE_B43_PHY_G
bool "Enable support for G-PHYs"
- default n if TARGET_brcm47xx_mips74k
+ default n if TARGET_bcm47xx_mips74k
default y
help
Enable support for G-PHY. This includes support for the following devices:
config PACKAGE_B43_PHY_LP
bool "Enable support for LP-PHYs"
- default n if TARGET_brcm47xx_mips74k
+ default n if TARGET_bcm47xx_mips74k
default y
help
Enable support for LP-PHY. This includes support for the following devices:
config PACKAGE_B43_PHY_HT
bool "Enable support for HT-PHYs"
- default n if TARGET_brcm47xx_legacy
+ default n if TARGET_bcm47xx_legacy
default y
help
Enable support for HT-PHY. This includes support for the following devices:
URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
KCONFIG:= \
CONFIG_HW_RANDOM=y
- DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb @!TARGET_brcm47xx_mips74k +b43legacy-firmware
+ DEPENDS+= +kmod-mac80211 +!(TARGET_bcm47xx||TARGET_brcm63xx):kmod-ssb @!TARGET_bcm47xx_mips74k +b43legacy-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko
AUTOLOAD:=$(call AutoProbe,b43legacy)
MENU:=1
$(call KernelPackage/mac80211/Default)
TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
- DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
+ DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_bcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko
AUTOLOAD:=$(call AutoProbe,brcmsmac)
MENU:=1
define KernelPackage/rtc-rv5c386a
SUBMENU:=Other modules
- DEPENDS:=@TARGET_brcm47xx @!IN_SDK
+ DEPENDS:=@TARGET_bcm47xx @!IN_SDK
TITLE:=Driver for RTC RV5C386A (used in WL-700gE and WL-HDD)
AUTOLOAD:=$(call AutoLoad,70,rtc)
FILES:=$(PKG_BUILD_DIR)/rtc.ko
obj.ath79 = $(obj.seama)
obj.gemini = $(obj.wrgg)
obj.brcm = trx.o
-obj.brcm47xx = $(obj.brcm)
+obj.bcm47xx = $(obj.brcm)
obj.bcm53xx = $(obj.brcm) $(obj.seama)
obj.brcm63xx = imagetag.o
obj.ramips = $(obj.seama) $(obj.tpl) $(obj.wrg)
#include <stdbool.h>
-#if defined(target_brcm47xx) || defined(target_bcm53xx)
+#if defined(target_bcm47xx) || defined(target_bcm53xx)
#define target_brcm 1
#endif
CATEGORY:=Base system
TITLE:=Userspace port of the Broadcom NVRAM manipulation tool
MAINTAINER:=Jo-Philipp Wich <xm@subsignal.org>
- DEPENDS:=@(TARGET_brcm47xx||TARGET_bcm53xx||TARGET_ar71xx||TARGET_ath79)
+ DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm53xx||TARGET_ar71xx||TARGET_ath79)
endef
define Package/nvram/description
define Package/nvram/install
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/nvram $(1)/usr/sbin/
-ifneq ($(CONFIG_TARGET_brcm47xx),)
+ifneq ($(CONFIG_TARGET_bcm47xx),)
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/nvram.init $(1)/etc/init.d/nvram
endif
CATEGORY:=Base system
TITLE:=Utility for opening (analyzing) TRX firmware images
MAINTAINER:=Rafał Miłecki <zajec5@gmail.com>
- DEPENDS:=@(TARGET_brcm47xx||TARGET_bcm53xx)
+ DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm53xx)
endef
define Package/otrx/description
include $(TOPDIR)/rules.mk
ARCH:=mipsel
-BOARD:=brcm47xx
+BOARD:=bcm47xx
BOARDNAME:=Broadcom BCM47xx/53xx (MIPS)
FEATURES:=squashfs usb
SUBTARGETS:=generic mips74k legacy
#!/bin/sh
-do_sysinfo_brcm47xx() {
+do_sysinfo_bcm47xx() {
local boardtype="$(nvram get boardtype)"
local boardnum="$(nvram get boardnum)"
local model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)"
echo "$model" > /tmp/sysinfo/model
}
-boot_hook_add preinit_main do_sysinfo_brcm47xx
+boot_hook_add preinit_main do_sysinfo_bcm47xx
esac
}
-brcm47xx_identify() {
+bcm47xx_identify() {
local magic
magic=$(get_magic_long "$1")
platform_check_image() {
[ "$#" -gt 1 ] && return 1
- local file_type=$(brcm47xx_identify "$1")
+ local file_type=$(bcm47xx_identify "$1")
local magic
local error=0
}
platform_do_upgrade() {
- local file_type=$(brcm47xx_identify "$1")
+ local file_type=$(bcm47xx_identify "$1")
local trx="$1"
local cmd=""
define KernelPackage/bgmac
TITLE:=Broadcom bgmac driver
KCONFIG:=CONFIG_BGMAC CONFIG_BGMAC_BCMA
- DEPENDS:=@TARGET_brcm47xx @!TARGET_brcm47xx_legacy
+ DEPENDS:=@TARGET_bcm47xx @!TARGET_bcm47xx_legacy
SUBMENU:=$(NETWORK_DEVICES_MENU)
FILES:= \
$(LINUX_DIR)/drivers/net/ethernet/broadcom/bgmac-bcma.ko \
-This generic GPIO watchdog is used on Huawei E970 (brcm47xx)
+This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
-This generic GPIO watchdog is used on Huawei E970 (brcm47xx)
+This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
projects / thirdparty / openwrt.git / commitdiff
