arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT

PMIC_nINT is low level triggered, but the current PAD settings is
PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured
as PULL UP with PULL Enable, no need SION. Correct it.

Fixes: 562d222f23f0f ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index 7e46537a22a01d6e66305394edcddd73fdf660da..cb28cf1cdd23fa945906e6f26f6036ceca496c5a 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -1001,7 +1001,7 @@
        pinctrl_pmic: pmic-grp {
                fsl,pins = <
                        /* PMIC_nINT */
-                       MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03             0x40000090
+                       MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03             0x1c0
                >;
        };