mediatek: filogic: add support for WAVLINK WL-WN573HX3

The WL-WN573HX3 is an AX3000 outdoor Access Point by WAVLINK,
also sold in Europe as 7Links WLR-1300 (ZX-5612).

Specifications:

- MT7981B + MT7976 AX3000 2x2 DBDC (160 MHz)
- 16 MiB SPI NOR, 256 MiB RAM
- Gigabit ethernet port, 802.3af PoE
- IP67 outdoor case for wall or pole mounting with
    four single band RP-SMA fiberglass antennas (8 dBi)

Installation:

- OEM Web UI is at 192.168.30.1 which will forward to
    http://netlogin.link (using a captive portal)
- login with default password `admin`
- skip setup wizard by navigating directly to
    http://netlogin.link/html/meshUpgrade.html
- upload WN573HX3-sysupgrade.bin
- reset to factory defaults to discard OEM UCI settings

MAC address assignment:

LAN         80:xx:xx:76:xx:25  hw 0x44e
WLAN 2.4G   80:xx:xx:76:xx:27  factory 0x04 (label MAC)
WLAN 5G	    82:xx:xx:46:xx:27
pair key    8a:xx:xx:76:xx:27  also on label, not used by OpenWrt

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>

diff --git a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
index 1025d1f1e1343c1239fe46bf039afde25471d43c..421f02938ae4813c3ee1ac12a896ae1af64a6069 100644 (file)
--- a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
+++ b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
@@ -3,7 +3,8 @@ set_preinit_iface() {
        cudy,m3000-v1|\
        cudy,tr3000-v1|\
        glinet,gl-mt3000|\
-       openembed,som7981)
+       openembed,som7981|\
+       wavlink,wl-wn573hx3)
                ip link set eth1 up
                ifname=eth1
                ;;

diff --git a/target/linux/mediatek/dts/mt7981b-wavlink-wl-wn573hx3.dts b/target/linux/mediatek/dts/mt7981b-wavlink-wl-wn573hx3.dts
new file mode 100644 (file)
index 0000000..ff22224
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7981b-wavlink-wl-wn573hx3.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "mt7981.dtsi"
+
+/ {
+       model = "WAVLINK WL-WN573HX3";
+       compatible = "wavlink,wl-wn573hx3", "mediatek,mt7981";
+
+       aliases {
+               label-mac-device = &wifi;
+
+               led-boot = &led_status_blue;
+               led-failsafe = &led_status_blue;
+               led-running = &led_status_blue;
+               led-upgrade = &led_status_blue;
+
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               button-reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led-0 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_LAN;
+                       gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_status_blue: led-1 {
+                       color = <LED_COLOR_ID_BLUE>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
+
+&eth {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mdio_pins>;
+
+       status = "okay";
+
+       gmac1: mac@1 {
+               compatible = "mediatek,eth-mac";
+               reg = <1>;
+               phy-mode = "gmii";
+               phy-handle = <&int_gbe_phy>;
+               nvmem-cells = <&macaddr_hw_44e 0>;
+               nvmem-cell-names = "mac-address";
+       };
+};
+
+&spi0 {
+       status = "disabled";
+};
+
+&spi2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi2_flash_pins>;
+       status = "okay";
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+
+               spi-max-frequency = <52000000>;
+               spi-tx-bus-width = <4>;
+               spi-rx-bus-width = <4>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@00000 {
+                               label = "bl2";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@50000 {
+                               label = "factory";
+                               reg = <0x50000 0xb0000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x1000>;
+                                       };
+                               };
+                       };
+
+                       partition@100000 {
+                               label = "fip";
+                               reg = <0x100000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@f0000 {
+                               compatible = "denx,fit";
+                               label = "firmware";
+                               reg = <0x180000 0xe00000>;
+                       };
+
+                       partition@f80000 {
+                               label = "hw";
+                               reg = <0xf80000 0x80000>;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_hw_44e: macaddr@44e {
+                                               compatible = "mac-base";
+                                               reg = <0x44e 0x11>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
+                       };
+               };
+       };
+};
+
+&pio {
+       spi2_flash_pins: spi2-pins {
+               mux {
+                       function = "spi";
+                       groups = "spi2", "spi2_wp_hold";
+               };
+
+               conf-pu {
+                       pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+                       drive-strength = <8>;
+                       bias-pull-up = <103>;
+               };
+
+               conf-pd {
+                       pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+                       drive-strength = <8>;
+                       bias-pull-down = <103>;
+               };
+       };
+};
+
+&wifi {
+       status = "okay";
+
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
+};

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 58ee1ad6196b1f19ce7532dc9ff85a75c445b622..e22bea3dd7c7bcd1c253d7a842ca7072c21f8553 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -44,7 +44,8 @@ bananapi,bpi-r4-poe)
        ucidef_set_led_netdev "lan2" "lan2" "mt7530-0:02:green:lan" "lan2" "link tx rx"
        ucidef_set_led_netdev "lan3" "lan3" "mt7530-0:03:green:lan" "lan3" "link tx rx"
        ;;
-cudy,re3000-v1)
+cudy,re3000-v1|\
+wavlink,wl-wn573hx3)
        ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" "link tx rx"
        ;;
 cudy,wr3000-v1)

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index c81e70e19b8ddab2d43213071a761ccb4b448139..82c3efcbc7c18844c4665a438e72c28a5ac5a00e 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -88,6 +88,7 @@ mediatek_setup_interfaces()
        cudy,re3000-v1|\
        netgear,wax220|\
        ubnt,unifi-6-plus|\
+       wavlink,wl-wn573hx3|\
        zyxel,nwa50ax-pro)
                ucidef_set_interface_lan "eth0"
                ;;

diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index 22e6e45436b2de1fa7202e48bc3e7795dde03d21..228c9bae804993fe32f793b49905e486ca9eb679 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -186,6 +186,10 @@ case "$board" in
                addr=$(mtd_get_mac_binary "Factory" 0x4)
                [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
                ;;
+       wavlink,wl-wn573hx3)
+               addr=$(mtd_get_mac_binary factory 0x04)
+               [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr -0x300000) > /sys${DEVPATH}/macaddress
+               ;;
        zyxel,nwa50ax-pro)
                hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"
                [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress

diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index c40fe825c2312434be687679b7539748a9d62c54..c48b6ce60da8ef58af72068133f529d74df2788d 100755 (executable)
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -132,7 +132,8 @@ platform_do_upgrade() {
                ;;
        cudy,re3000-v1|\
        cudy,wr3000-v1|\
-       yuncore,ax835)
+       yuncore,ax835|\
+       wavlink,wl-wn573hx3)
                default_do_upgrade "$1"
                ;;
        dlink,aquila-pro-ai-m30-a1|\

diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index b2edaa389ded18a774b4b4ff0b4e2be27107a5c2..3eb930f6d6f45fcdf610d0d80960c071f20ac7a6 100644 (file)
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -1678,6 +1678,24 @@ define Device/wavlink_wl-wn586x3
 endef
 TARGET_DEVICES += wavlink_wl-wn586x3
 
+define Device/wavlink_wl-wn573hx3
+  DEVICE_VENDOR := WAVLINK
+  DEVICE_MODEL := WL-WN573HX3
+  DEVICE_ALT0_VENDOR := 7Links
+  DEVICE_ALT0_MODEL := WLR-1300
+  DEVICE_DTS := mt7981b-wavlink-wl-wn573hx3
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_LOADADDR := 0x47000000
+  IMAGE_SIZE := 14336k
+  KERNEL := kernel-bin | lzma | \
+       fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
+  SUPPORTED_DEVICES += mediatek,mt7981-spim-nor-rfb
+  IMAGES = WN573HX3-sysupgrade.bin
+  IMAGE/WN573HX3-sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += wavlink_wl-wn573hx3
+
 define Device/xiaomi_mi-router-ax3000t
   DEVICE_VENDOR := Xiaomi
   DEVICE_MODEL := Mi Router AX3000T