Revert "update nl80211.h"

This reverts commit 73e5583c5c9ae8cfc466773cfda8431c268b41e8.

Fucked up stuff there.

diff --git a/nl80211.h b/nl80211.h
index 1ce3775e9e26e60b654617b0c884c6b78bb3d1b5..c08709fe36fc93f842cb4a6e0149741e0f6efaa6 100644 (file)
--- a/nl80211.h
+++ b/nl80211.h
@@ -804,30 +804,6 @@ enum nl80211_commands {
  * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
  *     means support for per-station GTKs.
  *
- * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
- *     This can be used to mask out antennas which are not attached or should
- *     not be used for transmitting. If an antenna is not selected in this
- *     bitmap the hardware is not allowed to transmit on this antenna.
- *
- *     Each bit represents one antenna, starting with antenna 1 at the first
- *     bit. Depending on which antennas are selected in the bitmap, 802.11n
- *     drivers can derive which chainmasks to use (if all antennas belonging to
- *     a particular chain are disabled this chain should be disabled) and if
- *     a chain has diversity antennas wether diversity should be used or not.
- *     HT capabilities (STBC, TX Beamforming, Antenna selection) can be
- *     derived from the available chains after applying the antenna mask.
- *     Non-802.11n drivers can derive wether to use diversity or not.
- *     Drivers may reject configurations or RX/TX mask combinations they cannot
- *     support by returning -EINVAL.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
- *     This can be used to mask out antennas which are not attached or should
- *     not be used for receiving. If an antenna is not selected in this bitmap
- *     the hardware should not be configured to receive on this antenna.
- *     For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX.
- *
- * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
- *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -997,11 +973,6 @@ enum nl80211_attrs {
 
        NL80211_ATTR_SUPPORT_IBSS_RSN,
 
-       NL80211_ATTR_WIPHY_ANTENNA_TX,
-       NL80211_ATTR_WIPHY_ANTENNA_RX,
-
-       NL80211_ATTR_MCAST_RATE,
-
        /* add attributes here, update the policy in nl80211.c */
 
        __NL80211_ATTR_AFTER_LAST,
@@ -1161,7 +1132,6 @@ enum nl80211_rate_info {
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
- * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
  *     containing info as possible, see &enum nl80211_sta_info_txrate.
  * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
@@ -1179,7 +1149,6 @@ enum nl80211_sta_info {
        NL80211_STA_INFO_PLID,
        NL80211_STA_INFO_PLINK_STATE,
        NL80211_STA_INFO_SIGNAL,
-       NL80211_STA_INFO_SIGNAL_AVG,
        NL80211_STA_INFO_TX_BITRATE,
        NL80211_STA_INFO_RX_PACKETS,
        NL80211_STA_INFO_TX_PACKETS,
@@ -1338,11 +1307,7 @@ enum nl80211_bitrate_attr {
  *     wireless core it thinks its knows the regulatory domain we should be in.
  * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
  *     802.11 country information element with regulatory information it
- *     thinks we should consider. cfg80211 only processes the country
- *     code from the IE, and relies on the regulatory domain information
- *     structure pased by userspace (CRDA) from our wireless-regdb.
- *     If a channel is enabled but the country code indicates it should
- *     be disabled we disable the channel and re-enable it upon disassociation.
+ *     thinks we should consider.
  */
 enum nl80211_reg_initiator {
        NL80211_REGDOM_SET_BY_CORE,
@@ -1448,16 +1413,6 @@ enum nl80211_reg_rule_flags {
  * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
  * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
  * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
- *     spent on this channel
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
- *     channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
- *     channel was sensed busy
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
- *     receiving data
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
- *     transmitting data
  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
  *     currently defined
  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -1467,11 +1422,6 @@ enum nl80211_survey_info {
        NL80211_SURVEY_INFO_FREQUENCY,
        NL80211_SURVEY_INFO_NOISE,
        NL80211_SURVEY_INFO_IN_USE,
-       NL80211_SURVEY_INFO_CHANNEL_TIME,
-       NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
-       NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
-       NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
-       NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
 
        /* keep last */
        __NL80211_SURVEY_INFO_AFTER_LAST,