Sync with wireless-next.git include/uapi/linux/nl80211.h

This brings in nl80211 definitions as of 2023-03-30.

Signed-off-by: Jouni Malinen <j@w1.fi>

diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 9a0ac0363f1fc9665cd29f8f6c42fd035b165185..c59fec406da5e304c96231b6d3e57fab78e163db 100644 (file)
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -2794,6 +2794,17 @@ enum nl80211_commands {
  * @NL80211_ATTR_HW_TIMESTAMP_ENABLED: Indicates whether HW timestamping should
  *     be enabled or not (flag attribute).
  *
+ * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for
+ *     reduced neighbor report (RNR) elements. This attribute can be used
+ *     only when NL80211_MBSSID_CONFIG_ATTR_EMA is enabled.
+ *     Userspace is responsible for splitting the RNR into multiple
+ *     elements such that each element excludes the non-transmitting
+ *     profiles already included in the MBSSID element
+ *     (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon
+ *     will be generated by adding MBSSID and RNR elements at the same
+ *     index. If the userspace includes more RNR elements than number of
+ *     MBSSID elements then these will be added in every EMA beacon.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3328,6 +3339,8 @@ enum nl80211_attrs {
        NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS,
        NL80211_ATTR_HW_TIMESTAMP_ENABLED,
 
+       NL80211_ATTR_EMA_RNR_ELEMS,
+
        /* add attributes here, update the policy in nl80211.c */
 
        __NL80211_ATTR_AFTER_LAST,
@@ -4048,6 +4061,10 @@ enum nl80211_band_iftype_attr {
  * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
  *     the allowed channel bandwidth configurations.
  *     Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
+ * @NL80211_BAND_ATTR_S1G_MCS_NSS_SET: S1G capabilities, supported S1G-MCS and NSS
+ *     set subfield, as in the S1G information IE, 5 bytes
+ * @NL80211_BAND_ATTR_S1G_CAPA: S1G capabilities information subfield as in the
+ *     S1G information IE, 10 bytes
  * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
  * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
  */
@@ -4068,6 +4085,9 @@ enum nl80211_band_attr {
        NL80211_BAND_ATTR_EDMG_CHANNELS,
        NL80211_BAND_ATTR_EDMG_BW_CONFIG,
 
+       NL80211_BAND_ATTR_S1G_MCS_NSS_SET,
+       NL80211_BAND_ATTR_S1G_CAPA,
+
        /* keep last */
        __NL80211_BAND_ATTR_AFTER_LAST,
        NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
@@ -6544,7 +6564,9 @@ enum nl80211_timeout_reason {
  *     channels on which APs are expected to be found. Note that when not set,
  *     the scan logic would scan all 6GHz channels, but since transmission of
  *     probe requests on non PSC channels is limited, it is highly likely that
- *     these channels would passively be scanned.
+ *     these channels would passively be scanned. Also note that when the flag
+ *     is set, in addition to the colocated APs, PSC channels would also be
+ *     scanned if the user space has asked for it.
  */
 enum nl80211_scan_flags {
        NL80211_SCAN_FLAG_LOW_PRIORITY                          = 1<<0,