arm64: dts: freescale: imx93-tqma9352-mba93xxla-mini: Add WLAN/BT overlay

This overlay enables the LWB5+ M.2 wlan module from ezurio.

Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 28b51282fd57e6e149428f9e635c9aed45343d2d..0858471420c321b96afcae8a11dd1a05bc676f4e 100644 (file)
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -492,6 +492,10 @@ imx93-tqma9352-mba91xxca-rgb-cdtech-dc44-dtbs := imx93-tqma9352-mba91xxca.dtb im
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca-rgb-cdtech-dc44.dtb
 
+imx93-tqma9352-mba93xxla-mini-ezurio-wlan-dtbs += imx93-tqma9352-mba93xxla-mini.dtb imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93w-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb

diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtso b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtso
new file mode 100644 (file)
index 0000000..12a14d8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtso
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2025-2026 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Martin Schmiedel
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+&lpuart7 {
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm4329-bt";
+               vbat-supply = <&reg_3v3>;
+               vddio-supply = <&reg_3v3>;
+               shutdown-gpios = <&expander0 5 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&usdhc3 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       brcmf_sdio: wifi@1 {
+               compatible = "brcm,bcm4329-fmac";
+               reg = <1>;
+               reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+       };
+};