Delete shairport-sync.conf~

Included by mhistake!

diff --git a/scripts/shairport-sync.conf~ b/scripts/shairport-sync.conf~
deleted file mode 100644 (file)
index 8a4dbf7..0000000
--- a/scripts/shairport-sync.conf~
+++ /dev/null
@@ -1,81 +0,0 @@
-// Sample Configuration File for Shairport Sync
-// Commented out settings are generally the defaults, except where noted.
-
-// General Settings
-general =
-{
-//     name = "Shairport Sync Player"; // This is the name the service will advertise to iTunes. The default is "Shairport Sync on <hostname>"
-//     password = "secret"; // comment out this line if you want to have no password
-//     interpolation = "basic"; // aka "stuffing". Default is "basic", alternative is "soxr". Use "soxr" only if you have a reasonably fast processor.
-//     output_backend = "alsa"; // Run "shairport-sync -h" to get a list of all output_backends, e.g. "alsa", "pipe", "stdout". The default is the first one.
-//     mdns_backend = "avahi"; // Run "shairport-sync -h" to get a list of all mdns_backends. The default is the first one.
-//     port = 5000; // Listen for service requests on this port
-//     udp_port_base = 6001; // start allocating UDP ports from this port number when needed
-//     udp_port_range = 100; // look for free ports in this number of places, starting at the UDP port base (only three are needed).
-//     statistics = "no"; // set to "yes" to print statistics in the log
-//     drift = 88; // allow this number of frames of drift away from exact synchronisation before attempting to correct it
-//     resync_threshold = 2205; // a synchronisation error greater than this will cause resynchronisation; 0 disables it
-//     log_verbosity = 0; // "0" means no debug verbosity, "3" is most verbose.
-//  ignore_volume_control = "no"; // set this to "yes" if you want the volume to be at 100% no matter what the source's volume control is set to.
-};
-
-// How to deal with metadata, including artwork
-metadata =
-{
-//     enabled = "no"; // et to yes to get Shairport Sync to solicit metadata from the source and to pass it on via a pipe
-//     include_cover_art = "no"; // set to "yes" to get Shairport Sync to solicit cover art from the source and pass it via the pipe. You must also set "enabled" to "yes".
-//     pipe_name = "/tmp/shairport-sync-metadata";
-};
-
-// Advanced parameters for controlling how a Shairport Sync runs
-sessioncontrol = 
-{
-//     run_this_before_play_begins = "/full/path/to/application and args"; // make sure the application has executable permission. It it's a script, include the #!... stuff on the first line
-//     run_this_after_play_ends = "/full/path/to/application and args"; // make sure the application has executable permission. It it's a script, include the #!... stuff on the first line
-//     wait_for_completion = "no"; // set to "yes" to get Shairport Sync to wait until the "run_this..." applications have terminated before continuing
-//     allow_session_interruption = "no"; // set to "yes" to allow another device to interrupt Shairport Sync while it's playing from an existing audio source
-//     session_timeout = 120; // wait for this number of seconds after a source disappears before terminating the session and becoming available again.
-};
-
-//
-// Back End Settings
-//
-
-// These are parameters for the "alsa" audio back end, the only back end that supports synchronised audio.
-alsa =
-{
-//  output_device = "default"; // the name of the alsa output device. Use "alsamixer" or "aplay" to find out the names of devices, mixers, etc.
-//  mixer_control_name = "PCM"; // the name of the mixer to use to adjust output volume. If not specified, volume in adjusted in software.
-//  mixer_device = "default"; // the mixer_device default is whatever the output_device is. Normally you wouldn't have to use this.
-//  audio_backend_latency_offset = 0; // Set this offset to compensate for a fixed delay in the audio back end. E.g. if the output device delays by 100 ms, set this to -4410.
-//  audio_backend_buffer_desired_length = 6615; // If set too small, buffer underflow occurs on low-powered machines. Too long and the response times with software mixer become annoying.
-};
-
-// These are parameters for the "pipe" audio back end, a back end that directs raw CD-style audio output to a pipe. No interpolation is done.
-pipe =
-{
-//  name = "/path/to/pipe"; // there is no default pipe name for the output
-//  audio_backend_latency_offset = 0; // Set this offset to compensate for a fixed delay in the audio back end. E.g. if the output device delays by 100 ms, set this to -4410.
-//  audio_backend_buffer_desired_length = 44100; // Having started to send audio at the right time, send all subsequent audio this many frames ahead of time, creating a buffer this size.
-};
-
-// These are parameters for the "stdout" audio back end, a back end that directs raw CD-style audio output to stdout. No interpolation is done.
-stdout =
-{
-//  audio_backend_latency_offset = 0; // Set this offset to compensate for a fixed delay in the audio back end. E.g. if the output device delays by 100 ms, set this to -4410.
-//  audio_backend_buffer_desired_length = 44100; // Having started to send audio at the right time, send all subsequent audio this many frames ahead of time, creating a buffer this size.
-};
-
-// The following static latency settings are deprecated -- do not use them for new installations. Shairport Sync now sets latencies automatically.
-// To compensate for a delay in the output device using the alsa/stdio/pipe "audio_backend_latency_offset" setting.
-
-// Static latencies for different sources. These have been estimated from listening tests.
-latencies =
-{
-//     default = 88200; // used for unrecognised sources and for iTunes up to and including iTunes 9.X.
-//     itunes = 99400; // used for iTunes 10 or later
-//     airplay = 88200;
-//     forkedDaapd = 99400;
-};
-
-