dt-bindings: gpio: Convert exar,xra1403 to DT schema

Convert XRA1403 16-bit GPIO Expander binding to DT schema format. It's a
straight forward conversion.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250714202813.3010879-1-robh@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/exar,xra1403.yaml b/Documentation/devicetree/bindings/gpio/exar,xra1403.yaml
new file mode 100644 (file)
index 0000000..053134f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/exar,xra1403.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/exar,xra1403.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: XRA1403 16-bit GPIO Expander with Reset Input
+
+maintainers:
+  - Nandor Han <nandor.han@ge.com>
+
+description: >
+  The XRA1403 is an 16-bit GPIO expander with an SPI interface. Features
+  available:
+
+    - Individually programmable inputs:
+        - Internal pull-up resistors
+        - Polarity inversion
+        - Individual interrupt enable
+        - Rising edge and/or Falling edge interrupt
+        - Input filter
+    - Individually programmable outputs:
+        - Output Level Control
+        - Output Three-State Control
+
+properties:
+  compatible:
+    const: exar,xra1403
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  reset-gpios:
+    description: Control line for the device reset.
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@2 {
+            compatible = "exar,xra1403";
+            reg = <2>;
+            spi-max-frequency = <1000000>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+        };
+    };

diff --git a/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt b/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt
deleted file mode 100644 (file)
index e13cc39..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-GPIO Driver for XRA1403 16-BIT GPIO Expander With Reset Input from EXAR
-
-The XRA1403 is an 16-bit GPIO expander with an SPI interface. Features available:
-       - Individually programmable inputs:
-               - Internal pull-up resistors
-               - Polarity inversion
-               - Individual interrupt enable
-               - Rising edge and/or Falling edge interrupt
-               - Input filter
-       - Individually programmable outputs
-               - Output Level Control
-               - Output Three-State Control
-
-Properties
-----------
-Check documentation for SPI and GPIO controllers regarding properties needed to configure the node.
-
-       - compatible = "exar,xra1403".
-       - reg - SPI id of the device.
-       - gpio-controller - marks the node as gpio.
-       - #gpio-cells - should be two where the first cell is the pin number
-               and the second one is used for optional parameters.
-
-Optional properties:
--------------------
-       - reset-gpios: in case available used to control the device reset line.
-       - interrupt-controller - marks the node as interrupt controller.
-       - #interrupt-cells - should be two and represents the number of cells
-               needed to encode interrupt source.
-
-Example
---------
-
-       gpioxra0: gpio@2 {
-               compatible = "exar,xra1403";
-               reg = <2>;
-
-               gpio-controller;
-               #gpio-cells = <2>;
-
-               interrupt-controller;
-               #interrupt-cells = <2>;
-
-               reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-               spi-max-frequency = <1000000>;
-       };