};
chosen {
- u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci;
+ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci, &ufshc;
};
dmc {
bootph-some-ram;
};
+#ifdef CONFIG_SPL_UFS_SUPPORT
+&gpio4 {
+ /* This is specifically for GPIO4_D0, which is the only 1.2V capable
+ * pin on RK3576 available for use as the UFS device reset, thus
+ * &gpio4 is required for booting from UFS on RK3576.
+ */
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+#endif
+
&ioc_grf {
bootph-all;
};
bootph-some-ram;
};
+&pcfg_pull_down {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
&pcfg_pull_none {
bootph-all;
};
bootph-pre-ram;
};
+&ufshc {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&ufs_refclk {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&ufs_rstgpio {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
&xin24m {
bootph-all;
};
BROM_BOOTSOURCE_SPINOR = 3,
BROM_BOOTSOURCE_SPINAND = 4,
BROM_BOOTSOURCE_SD = 5,
+ BROM_BOOTSOURCE_UFS = 7,
BROM_BOOTSOURCE_I2C = 8,
BROM_BOOTSOURCE_SPI = 9,
BROM_BOOTSOURCE_USB = 10,
[BROM_BOOTSOURCE_FSPI0] = "/soc/spi@2a340000/flash@0",
[BROM_BOOTSOURCE_FSPI1_M1] = "/soc/spi@2a300000/flash@0",
[BROM_BOOTSOURCE_SD] = "/soc/mmc@2a310000",
+ [BROM_BOOTSOURCE_UFS] = "/soc/ufshc@2a2d0000",
};
static struct mm_region rk3576_mem_map[] = {
if (!uclass_find_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent))
return BOOT_DEVICE_SPI;
+ if (!uclass_find_device_by_of_offset(UCLASS_UFS, node, &parent))
+ return BOOT_DEVICE_UFS;
+
return -1;
}
return -ENODEV;
}
+ if (boot_device == BOOT_DEVICE_UFS) {
+ ret = uclass_find_device(UCLASS_UFS, 0, &dev);
+ if (ret) {
+ debug("%s: could not find device for UFS: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ return ofnode_get_path(dev_ofnode(dev), buf, buflen);
+ }
+
#if CONFIG_IS_ENABLED(BLK)
dev_num = (boot_device == BOOT_DEVICE_MMC1) ? 0 : 1;