--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
+// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
+// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
+
+#include "qcom-ipq4018-mf287_common.dtsi"
+
+/ {
+ model = "ZTE MF287";
+ compatible = "zte,mf287";
+
+ /*
+ * This node is used to restart modem module to avoid anomalous
+ * behaviours on initial communication.
+ */
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&key_reset {
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+};
+
+&key_wps {
+ gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+};
+
+&led_status {
+ gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
+ <&tlmm 59 GPIO_ACTIVE_HIGH>,
+ <&tlmm 1 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "0:QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "0:CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "0:APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "0:APPSBL";
+ reg = <0xf0000 0xc0000>;
+ read-only;
+ };
+
+ partition@1b0000 {
+ label = "0:reserved1";
+ reg = <0x1b0000 0x50000>;
+ read-only;
+ };
+ };
+ };
+
+ spi-nand@1 { /* flash@1 ? */
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "fota-flag";
+ reg = <0x0 0x140000>;
+ read-only;
+ };
+
+ partition@140000 {
+ label = "ART";
+ reg = <0x140000 0x140000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@280000 {
+ label = "mac";
+ reg = <0x280000 0x140000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_mac_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+ };
+
+ partition@3c0000 {
+ label = "cfg-param";
+ reg = <0x3c0000 0x600000>;
+ read-only;
+ };
+
+ partition@9c0000 {
+ label = "oops";
+ reg = <0x9c0000 0x140000>;
+ };
+
+ partition@b00000 {
+ label = "web";
+ reg = <0xb00000 0x800000>;
+ };
+
+ partition@1300000 {
+ label = "rootfs";
+ reg = <0x1300000 0x2200000>;
+ };
+
+ partition@3500000 {
+ label = "data";
+ reg = <0x3500000 0x1900000>;
+ };
+
+ partition@4e00000 {
+ label = "fota";
+ reg = <0x4e00000 0x3200000>;
+ };
+ };
+ };
+
+ zigbee@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "silabs,em3581";
+ reg = <2>;
+ spi-max-frequency = <12000000>;
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio54", "gpio59", "gpio1";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&wifi0 {
+ qcom,ath10k-calibration-variant = "zte,mf287";
+};
+
+&wifi1{
+ qcom,ath10k-calibration-variant = "zte,mf287";
+};
define Device/zte_mf287_common
$(call Device/zte_mf28x_common)
- DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
SOC := qcom-ipq4018
# The recovery image is used to return back to stock (an initramfs-based image
# that can be flashed to the device via sysupgrade
define Device/zte_mf287plus
$(call Device/zte_mf287_common)
+ DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
DEVICE_MODEL := MF287Plus
- DEVICE_ALT0_VENDOR := ZTE
- DEVICE_ALT0_MODEL := MF287
endef
TARGET_DEVICES += zte_mf287plus
+define Device/zte_mf287
+ $(call Device/zte_mf287_common)
+ DEVICE_PACKAGES += ipq-wifi-zte_mf287
+ DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+ DEVICE_MODEL := MF287
+endef
+TARGET_DEVICES += zte_mf287
+
define Device/zte_mf287pro
$(call Device/zte_mf287_common)
+ DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
DEVICE_MODEL := MF287Pro
endef
projects / thirdparty / openwrt.git / commitdiff
