+++ /dev/null
-* ARC HS Performance Counters
-
-The ARC HS can be configured with a pipeline performance monitor for counting
-CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to up to 32 counters.
-It also supports overflow interrupts.
-
-Required properties:
-
-- compatible : should contain
- "snps,archs-pct"
-
-Example:
-
-pmu {
- compatible = "snps,archs-pct";
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arc/snps,archs-pct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARC HS Performance Counters
+
+maintainers:
+ - Aryabhatta Dey <aryabhattadey35@gmail.com>
+
+description:
+ The ARC HS can be configured with a pipeline performance monitor for counting
+ CPU and cache events like cache misses and hits. Like conventional PCT there
+ are 100+ hardware conditions dynamically mapped to up to 32 counters.
+ It also supports overflow interrupts.
+
+properties:
+ compatible:
+ const: snps,archs-pct
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
properties:
compatible:
- items:
- - const: amlogic,meson-gx-ao-secure
- - const: syscon
-
+ oneOf:
+ - items:
+ - const: amlogic,meson-gx-ao-secure
+ - const: syscon
+ - items:
+ - enum:
+ - amlogic,a4-ao-secure
+ - amlogic,c3-ao-secure
+ - amlogic,s4-ao-secure
+ - amlogic,t7-ao-secure
+ - const: amlogic,meson-gx-ao-secure
+ - const: syscon
reg:
maxItems: 1
The Coresight dummy source component is for the specific coresight source
devices kernel don't have permission to access or configure. For some SOCs,
there would be Coresight source trace components on sub-processor which
- are conneted to AP processor via debug bus. For these devices, a dummy driver
+ are connected to AP processor via debug bus. For these devices, a dummy driver
is needed to register them as Coresight source devices, so that paths can be
created in the driver. It provides Coresight API for operations on dummy
source devices, such as enabling and disabling them. It also provides the
title: ARM Corstone1000
maintainers:
- - Vishnu Banavath <vishnu.banavath@arm.com>
- - Rui Miguel Silva <rui.silva@linaro.org>
+ - Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
+ - Hugues Kamba Mpiana <hugues.kambampiana@arm.com>
description: |+
ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that
- aspeed,ast2600-evb-a1
- asus,x4tf-bmc
- facebook,bletchley-bmc
+ - facebook,catalina-bmc
- facebook,cloudripper-bmc
- facebook,elbert-bmc
- facebook,fuji-bmc
- facebook,harma-bmc
- facebook,minerva-cmc
- facebook,yosemite4-bmc
+ - ibm,blueridge-bmc
- ibm,everest-bmc
+ - ibm,fuji-bmc
- ibm,rainier-bmc
- ibm,system1-bmc
- ibm,tacoma-bmc
shared across all System Controller members.
PIT64B Timer required properties:
-- compatible: Should be "microchip,sam9x60-pit64b"
+- compatible: Should be "microchip,sam9x60-pit64b" or
+ "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for PIT64B timer
- clocks: Should contain the available clock sources for PIT64B timer.
"atmel,at91sam9g45-ddramc",
"atmel,sama5d3-ddramc",
"microchip,sam9x60-ddramc",
- "microchip,sama7g5-uddrc"
+ "microchip,sama7g5-uddrc",
+ "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc".
- reg: Should contain registers location and length
Examples:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cirrus/cirrus,ep9301.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP93xx platforms
+
+description:
+ The EP93xx SoC is a ARMv4T-based with 200 MHz ARM9 CPU.
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: The TS-7250 is a compact, full-featured Single Board
+ Computer (SBC) based upon the Cirrus EP9302 ARM9 CPU
+ items:
+ - const: technologic,ts7250
+ - const: cirrus,ep9301
+
+ - description: The Liebherr BK3 is a derivate from ts7250 board
+ items:
+ - const: liebherr,bk3
+ - const: cirrus,ep9301
+
+ - description: EDB302 is an evaluation board by Cirrus Logic,
+ based on a Cirrus Logic EP9302 CPU
+ items:
+ - const: cirrus,edb9302
+ - const: cirrus,ep9301
+
+additionalProperties: true
- const: kontron,sl-imx6ull # Kontron SL i.MX6ULL SoM
- const: fsl,imx6ull
- - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board
+ - description: TQ-Systems TQMa6ULLx SoM on MBa6ULx board
items:
- enum:
- - tq,imx6ull-tqma6ull2-mba6ulx
- - const: tq,imx6ull-tqma6ull2 # MCIMX6Y2
+ - tq,imx6ull-tqma6ull2-mba6ulx # TQMa6ULL socketable SoM with MCIMX6Y2 on MBa6ULx EVK
+ - const: tq,imx6ull-tqma6ull2 # TQMa6ULL socketable SoM with MCIMX6Y2
- const: fsl,imx6ull
- - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board
+ - description: TQ-Systems TQMa6ULLxL SoM on MBa6ULx[L] board
items:
- enum:
- - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter
- - tq,imx6ull-tqma6ull2l-mba6ulxl
- - const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant
+ - tq,imx6ull-tqma6ull2l-mba6ulx # TQMa6ULLxL LGA SoM with socketable Adapter on MBa6ULx EVK
+ - tq,imx6ull-tqma6ull2l-mba6ulxl # TQMa6ULLxL LGA SoM on MBa6ULxL gateway board
+ - const: tq,imx6ull-tqma6ull2l # TQMa6ULLxL LGA SoM with MCIMX6Y2
- const: fsl,imx6ull
- description: Seeed Stuido i.MX6ULL SoM on dev boards
- fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board
- fsl,imx8mm-evk # i.MX8MM EVK Board
- fsl,imx8mm-evkb # i.MX8MM EVKB Board
+ - gateworks,imx8mm-gw75xx-0x # i.MX8MM Gateworks Board
- gateworks,imx8mm-gw7904
- - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks Board
- gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit
- gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit
- gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit
- toradex,verdin-imx8mm # Verdin iMX8M Mini Modules
- toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Modules without Wi-Fi / BT
- toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Modules
- - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module
- prt,prt8mm # i.MX8MM Protonic PRT8MM Board
- const: fsl,imx8mm
- gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board
- - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board
+ - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board
- skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
- skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel
- skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
- const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
- const: fsl,imx8mp
+ - description: Variscite VAR-SOM-MX8M Plus based boards
+ items:
+ - const: variscite,var-som-mx8mp-symphony
+ - const: variscite,var-som-mx8mp
+ - const: fsl,imx8mp
+
- description: i.MX8MQ based Boards
items:
- enum:
- enum:
- fsl,imx93-9x9-qsb # i.MX93 9x9 QSB Board
- fsl,imx93-11x11-evk # i.MX93 11x11 EVK Board
+ - fsl,imx93-14x14-evk # i.MX93 14x14 EVK Board
- const: fsl,imx93
- description: i.MX95 based Boards
- const: variscite,var-som-mx93
- const: fsl,imx93
+ - description: Kontron OSM-S i.MX93 SoM based boards
+ items:
+ - const: kontron,imx93-bl-osm-s # Kontron BL i.MX93 OSM-S board
+ - const: kontron,imx93-osm-s # Kontron OSM-S i.MX93 SoM
+ - const: fsl,imx93
+
- description:
Freescale Vybrid Platform Device Tree Bindings
- fsl,ls2080a-rdb
- const: fsl,ls2080a
+ - description: LS2081A based Boards
+ items:
+ - enum:
+ - fsl,ls2081a-rdb
+ - const: fsl,ls2081a
+
- description: LS2088A based Boards
items:
- enum:
+++ /dev/null
-Mediatek bdpsys controller
-============================
-
-The Mediatek bdpsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
- - "mediatek,mt2701-bdpsys", "syscon"
- - "mediatek,mt2712-bdpsys", "syscon"
- - "mediatek,mt7623-bdpsys", "mediatek,mt2701-bdpsys", "syscon"
-- #clock-cells: Must be 1
-
-The bdpsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-bdpsys: clock-controller@1c000000 {
- compatible = "mediatek,mt2701-bdpsys", "syscon";
- reg = <0 0x1c000000 0 0x1000>;
- #clock-cells = <1>;
-};
+++ /dev/null
-MediaTek CAMSYS controller
-============================
-
-The MediaTek camsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt6765-camsys", "syscon"
- - "mediatek,mt6779-camsys", "syscon"
- - "mediatek,mt8183-camsys", "syscon"
-- #clock-cells: Must be 1
-
-The camsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-camsys: camsys@1a000000 {
- compatible = "mediatek,mt8183-camsys", "syscon";
- reg = <0 0x1a000000 0 0x1000>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek imgsys controller
-============================
-
-The Mediatek imgsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt2701-imgsys", "syscon"
- - "mediatek,mt2712-imgsys", "syscon"
- - "mediatek,mt6765-imgsys", "syscon"
- - "mediatek,mt6779-imgsys", "syscon"
- - "mediatek,mt6797-imgsys", "syscon"
- - "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
- - "mediatek,mt8167-imgsys", "syscon"
- - "mediatek,mt8173-imgsys", "syscon"
- - "mediatek,mt8183-imgsys", "syscon"
-- #clock-cells: Must be 1
-
-The imgsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-imgsys: clock-controller@15000000 {
- compatible = "mediatek,mt8173-imgsys", "syscon";
- reg = <0 0x15000000 0 0x1000>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek ipesys controller
-============================
-
-The Mediatek ipesys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt6779-ipesys", "syscon"
-- #clock-cells: Must be 1
-
-The ipesys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ipesys: clock-controller@1b000000 {
- compatible = "mediatek,mt6779-ipesys", "syscon";
- reg = <0 0x1b000000 0 0x1000>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek IPU controller
-============================
-
-The Mediatek ipu controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt8183-ipu_conn", "syscon"
- - "mediatek,mt8183-ipu_adl", "syscon"
- - "mediatek,mt8183-ipu_core0", "syscon"
- - "mediatek,mt8183-ipu_core1", "syscon"
-- #clock-cells: Must be 1
-
-The ipu controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ipu_conn: syscon@19000000 {
- compatible = "mediatek,mt8183-ipu_conn", "syscon";
- reg = <0 0x19000000 0 0x1000>;
- #clock-cells = <1>;
-};
-
-ipu_adl: syscon@19010000 {
- compatible = "mediatek,mt8183-ipu_adl", "syscon";
- reg = <0 0x19010000 0 0x1000>;
- #clock-cells = <1>;
-};
-
-ipu_core0: syscon@19180000 {
- compatible = "mediatek,mt8183-ipu_core0", "syscon";
- reg = <0 0x19180000 0 0x1000>;
- #clock-cells = <1>;
-};
-
-ipu_core1: syscon@19280000 {
- compatible = "mediatek,mt8183-ipu_core1", "syscon";
- reg = <0 0x19280000 0 0x1000>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek jpgdecsys controller
-============================
-
-The Mediatek jpgdecsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
- - "mediatek,mt2712-jpgdecsys", "syscon"
-- #clock-cells: Must be 1
-
-The jpgdecsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-jpgdecsys: syscon@19000000 {
- compatible = "mediatek,mt2712-jpgdecsys", "syscon";
- reg = <0 0x19000000 0 0x1000>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek mcucfg controller
-============================
-
-The Mediatek mcucfg controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt2712-mcucfg", "syscon"
- - "mediatek,mt8183-mcucfg", "syscon"
-- #clock-cells: Must be 1
-
-The mcucfg controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-mcucfg: syscon@10220000 {
- compatible = "mediatek,mt2712-mcucfg", "syscon";
- reg = <0 0x10220000 0 0x1000>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek mfgcfg controller
-============================
-
-The Mediatek mfgcfg controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt2712-mfgcfg", "syscon"
- - "mediatek,mt6779-mfgcfg", "syscon"
- - "mediatek,mt8167-mfgcfg", "syscon"
- - "mediatek,mt8183-mfgcfg", "syscon"
-- #clock-cells: Must be 1
-
-The mfgcfg controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-mfgcfg: syscon@13000000 {
- compatible = "mediatek,mt2712-mfgcfg", "syscon";
- reg = <0 0x13000000 0 0x1000>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek mipi0a (mipi_rx_ana_csi0a) controller
-============================
-
-The Mediatek mipi0a controller provides various clocks
-to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt6765-mipi0a", "syscon"
-- #clock-cells: Must be 1
-
-The mipi0a controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-The mipi0a controller also uses the common power domain from
-Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
-The available power domains are defined in dt-bindings/power/mt*-power.h.
-
-Example:
-
-mipi0a: clock-controller@11c10000 {
- compatible = "mediatek,mt6765-mipi0a", "syscon";
- reg = <0 0x11c10000 0 0x1000>;
- power-domains = <&scpsys MT6765_POWER_DOMAIN_CAM>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek vcodecsys controller
-============================
-
-The Mediatek vcodecsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt6765-vcodecsys", "syscon"
-- #clock-cells: Must be 1
-
-The vcodecsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-The vcodecsys controller also uses the common power domain from
-Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
-The available power domains are defined in dt-bindings/power/mt*-power.h.
-
-Example:
-
-venc_gcon: clock-controller@17000000 {
- compatible = "mediatek,mt6765-vcodecsys", "syscon";
- reg = <0 0x17000000 0 0x10000>;
- power-domains = <&scpsys MT6765_POWER_DOMAIN_VCODEC>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek vdecsys controller
-============================
-
-The Mediatek vdecsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt2701-vdecsys", "syscon"
- - "mediatek,mt2712-vdecsys", "syscon"
- - "mediatek,mt6779-vdecsys", "syscon"
- - "mediatek,mt6797-vdecsys", "syscon"
- - "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
- - "mediatek,mt8167-vdecsys", "syscon"
- - "mediatek,mt8173-vdecsys", "syscon"
- - "mediatek,mt8183-vdecsys", "syscon"
-- #clock-cells: Must be 1
-
-The vdecsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-vdecsys: clock-controller@16000000 {
- compatible = "mediatek,mt8173-vdecsys", "syscon";
- reg = <0 0x16000000 0 0x1000>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek vencltsys controller
-============================
-
-The Mediatek vencltsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
- - "mediatek,mt8173-vencltsys", "syscon"
-- #clock-cells: Must be 1
-
-The vencltsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-vencltsys: clock-controller@19000000 {
- compatible = "mediatek,mt8173-vencltsys", "syscon";
- reg = <0 0x19000000 0 0x1000>;
- #clock-cells = <1>;
-};
+++ /dev/null
-Mediatek vencsys controller
-============================
-
-The Mediatek vencsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt2712-vencsys", "syscon"
- - "mediatek,mt6779-vencsys", "syscon"
- - "mediatek,mt6797-vencsys", "syscon"
- - "mediatek,mt8173-vencsys", "syscon"
- - "mediatek,mt8183-vencsys", "syscon"
-- #clock-cells: Must be 1
-
-The vencsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-vencsys: clock-controller@18000000 {
- compatible = "mediatek,mt8173-vencsys", "syscon";
- reg = <0 0x18000000 0 0x1000>;
- #clock-cells = <1>;
-};
- const: qcom,msm8926
- const: qcom,msm8226
+ - items:
+ - enum:
+ - wingtech,wt82918hd
+ - const: qcom,msm8929
+
- items:
- enum:
- huawei,kiwi
- samsung,a7
- sony,kanuti-tulip
- square,apq8039-t2
+ - wingtech,wt82918
+ - wingtech,wt82918hdhw39
- const: qcom,msm8939
- items:
- samsung,grandprimelte
- samsung,gt510
- samsung,gt58
+ - samsung,j3ltetw
- samsung,j5
- samsung,j5x
- samsung,rossa
- samsung,serranove
- thwc,uf896
- thwc,ufi001c
+ - wingtech,wt86518
+ - wingtech,wt86528
- wingtech,wt88047
- yiming,uz801-v3
- const: qcom,msm8916
- items:
- enum:
- lg,bullhead
+ - lg,h815
- microsoft,talkman
- xiaomi,libra
- const: qcom,msm8992
- qcom,sm8650-qrd
- const: qcom,sm8650
+ - items:
+ - enum:
+ - lenovo,thinkpad-t14s
+ - const: qcom,x1e78100
+ - const: qcom,x1e80100
+
- items:
- enum:
- asus,vivobook-s15
- lenovo,yoga-slim7x
+ - microsoft,romulus13
+ - microsoft,romulus15
- qcom,x1e80100-crd
- qcom,x1e80100-qcp
- const: qcom,x1e80100
- const: coolpi,pi-cm5
- const: rockchip,rk3588
+ - description: Cool Pi CM5 GenBook
+ items:
+ - enum:
+ - coolpi,pi-cm5-genbook
+ - const: coolpi,pi-cm5
+ - const: rockchip,rk3588
+
- description: Cool Pi 4 Model B
items:
- const: coolpi,pi-4b
- const: engicam,px30-core
- const: rockchip,px30
+ - description: Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard
+ items:
+ - const: firefly,px30-jd4-core-mb
+ - const: firefly,px30-jd4-core
+ - const: rockchip,px30
+
- description: Firefly Firefly-RK3288
items:
- enum:
- friendlyarm,nanopi-r2c
- friendlyarm,nanopi-r2c-plus
- friendlyarm,nanopi-r2s
+ - friendlyarm,nanopi-r2s-plus
- const: rockchip,rk3328
- description: FriendlyElec NanoPi4 series boards
- friendlyarm,nanopi-r6s
- const: rockchip,rk3588s
- - description: FriendlyElec NanoPC T6
+ - description: FriendlyElec NanoPC T6 series boards
items:
- - const: friendlyarm,nanopc-t6
+ - enum:
+ - friendlyarm,nanopc-t6
+ - friendlyarm,nanopc-t6-lts
- const: rockchip,rk3588
- description: FriendlyElec CM3588-based boards
- const: friendlyarm,cm3588
- const: rockchip,rk3588
+ - description: GameForce Ace
+ items:
+ - const: gameforce,ace
+ - const: rockchip,rk3588s
+
- description: GameForce Chi
items:
- const: gameforce,chi
- description: Hardkernel Odroid M1
items:
- - const: rockchip,rk3568-odroid-m1
+ - const: hardkernel,odroid-m1
- const: rockchip,rk3568
+ - description: Hardkernel Odroid M1S
+ items:
+ - const: hardkernel,odroid-m1s
+ - const: rockchip,rk3566
+
+ - description: Hardkernel Odroid M2
+ items:
+ - const: hardkernel,odroid-m2
+ - const: rockchip,rk3588s
+
- description: Hugsun X99 TV Box
items:
- const: hugsun,x99
- const: leez,p710
- const: rockchip,rk3399
+ - description: LCKFB Taishan Pi RK3566
+ items:
+ - const: lckfb,tspi-rk3566
+ - const: rockchip,rk3566
+
- description: Lunzn FastRhino R66S / R68S
items:
- enum:
- rockchip,rk3368-pmu
- rockchip,rk3399-pmu
- rockchip,rk3568-pmu
+ - rockchip,rk3576-pmu
- rockchip,rk3588-pmu
- rockchip,rv1126-pmu
- rockchip,rk3368-pmu
- rockchip,rk3399-pmu
- rockchip,rk3568-pmu
+ - rockchip,rk3576-pmu
- rockchip,rk3588-pmu
- rockchip,rv1126-pmu
- const: syscon
- description: ST STM32MP151 based Boards
items:
- enum:
+ - prt,mecio1r0 # Protonic MECIO1r0
+ - prt,mect1s # Protonic MECT1S
- prt,prtt1a # Protonic PRTT1A
- prt,prtt1c # Protonic PRTT1C
- prt,prtt1s # Protonic PRTT1S
- const: dh,stm32mp151a-dhcor-som
- const: st,stm32mp151
+ - description: ST STM32MP153 based Boards
+ items:
+ - enum:
+ - prt,mecio1r1 # Protonic MECIO1r1
+ - const: st,stm32mp153
+
- description: DH STM32MP153 DHCOM SoM based Boards
items:
- const: dh,stm32mp153c-dhcom-drc02
- const: anbernic,rg35xx-2024
- const: allwinner,sun50i-h700
+ - description: Anbernic RG35XX H
+ items:
+ - const: anbernic,rg35xx-h
+ - const: allwinner,sun50i-h700
+
- description: Anbernic RG35XX Plus
items:
- const: anbernic,rg35xx-plus
- const: allwinner,sun50i-h700
- - description: Anbernic RG35XX H
+ - description: Anbernic RG35XX SP
items:
- - const: anbernic,rg35xx-h
+ - const: anbernic,rg35xx-sp
- const: allwinner,sun50i-h700
- description: Amarula A64 Relic
- nvidia,norrin
- const: nvidia,tegra132
- const: nvidia,tegra124
+ - items:
+ - const: google,nyan-blaze-rev10
+ - const: google,nyan-blaze-rev9
+ - const: google,nyan-blaze-rev8
+ - const: google,nyan-blaze-rev7
+ - const: google,nyan-blaze-rev6
+ - const: google,nyan-blaze-rev5
+ - const: google,nyan-blaze-rev4
+ - const: google,nyan-blaze-rev3
+ - const: google,nyan-blaze-rev2
+ - const: google,nyan-blaze-rev1
+ - const: google,nyan-blaze-rev0
+ - const: google,nyan-blaze
+ - const: google,nyan
+ - const: nvidia,tegra124
+ - items:
+ - const: google,nyan-big-rev10
+ - const: google,nyan-big-rev9
+ - const: google,nyan-big-rev8
+ - const: google,nyan-big-rev7
+ - const: google,nyan-big-rev6
+ - const: google,nyan-big-rev5
+ - const: google,nyan-big-rev4
+ - const: google,nyan-big-rev3
+ - const: google,nyan-big-rev2
+ - const: google,nyan-big-rev1
+ - const: google,nyan-big-rev0
+ - const: google,nyan-big
+ - const: google,nyan
+ - const: nvidia,tegra124
+ - items:
+ - const: google,nyan-big-rev7
+ - const: google,nyan-big-rev6
+ - const: google,nyan-big-rev5
+ - const: google,nyan-big-rev4
+ - const: google,nyan-big-rev3
+ - const: google,nyan-big-rev2
+ - const: google,nyan-big-rev1
+ - const: google,nyan-big-rev0
+ - const: google,nyan-big
+ - const: google,nyan
+ - const: nvidia,tegra124
- items:
- enum:
- nvidia,darcy
- description: K3 J722S SoC and Boards
items:
- enum:
+ - beagle,am67a-beagley-ai
- ti,j722s-evm
- const: ti,j722s
- marvell,armada-3700-ahci
- marvell,armada-8k-ahci
- marvell,berlin2q-ahci
+ - qcom,apq8064-ahci
+ - qcom,ipq806x-ahci
- socionext,uniphier-pro4-ahci
- socionext,uniphier-pxs2-ahci
- socionext,uniphier-pxs3-ahci
- marvell,armada-8k-ahci
- marvell,berlin2-ahci
- marvell,berlin2q-ahci
+ - qcom,apq8064-ahci
+ - qcom,ipq806x-ahci
- socionext,uniphier-pro4-ahci
- socionext,uniphier-pxs2-ahci
- socionext,uniphier-pxs3-ahci
clocks:
minItems: 1
- maxItems: 3
+ maxItems: 5
clock-names:
minItems: 1
- maxItems: 3
+ maxItems: 5
interrupts:
maxItems: 1
allOf:
- $ref: ahci-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,apq8064-ahci
+ - qcom,ipq806x-ahci
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ clock-names:
+ items:
+ - const: slave_iface
+ - const: iface
+ - const: core
+ - const: rxoob
+ - const: pmalive
+ required:
+ - phys
+ - phy-names
+ - clocks
+ - clock-names
+
- if:
properties:
compatible:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cirrus,ep9312-pata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP9312 PATA controller
+
+maintainers:
+ - Damien Le Moal <dlemoal@kernel.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9312-pata
+ - items:
+ - const: cirrus,ep9315-pata
+ - const: cirrus,ep9312-pata
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ ide@800a0000 {
+ compatible = "cirrus,ep9312-pata";
+ reg = <0x800a0000 0x38>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ide_default_pins>;
+ };
- fsl,imx53-ahci
- fsl,imx6q-ahci
- fsl,imx6qp-ahci
+ - fsl,imx8qm-ahci
reg:
maxItems: 1
maxItems: 1
clocks:
+ minItems: 2
items:
- description: sata clock
- description: sata reference clock
- description: ahb clock
clock-names:
+ minItems: 2
items:
- const: sata
- const: sata_ref
$ref: /schemas/types.yaml#/definitions/flag
description: if present, disable spread-spectrum clocking on the SATA link.
+ phys:
+ items:
+ - description: phandle to SATA PHY.
+ Since "REXT" pin is only present for first lane of i.MX8QM PHY, it's
+ calibration result will be stored, passed through second lane, and
+ shared with all three lanes PHY. The first two lanes PHY are used as
+ calibration PHYs, although only the third lane PHY is used by SATA.
+ - description: phandle to the first lane PHY of i.MX8QM.
+ - description: phandle to the second lane PHY of i.MX8QM.
+
+ phy-names:
+ items:
+ - const: sata-phy
+ - const: cali-phy0
+ - const: cali-phy1
+
+ power-domains:
+ maxItems: 1
+
required:
- compatible
- reg
- clocks
- clock-names
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx53-ahci
+ - fsl,imx6q-ahci
+ - fsl,imx6qp-ahci
+ then:
+ properties:
+ clock-names:
+ minItems: 3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-ahci
+ then:
+ properties:
+ clock-names:
+ minItems: 2
+
additionalProperties: false
examples:
+++ /dev/null
-* Qualcomm AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible : compatible list, must contain "generic-ahci"
-- interrupts : <interrupt mapping for SATA IRQ>
-- reg : <registers mapping>
-- phys : Must contain exactly one entry as specified
- in phy-bindings.txt
-- phy-names : Must be "sata-phy"
-
-Required properties for "qcom,ipq806x-ahci" compatible:
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : Shall be:
- "slave_iface" - Fabric port AHB clock for SATA
- "iface" - AHB clock
- "core" - core clock
- "rxoob" - RX out-of-band clock
- "pmalive" - Power Module Alive clock
-- assigned-clocks : Shall be:
- SATA_RXOOB_CLK
- SATA_PMALIVE_CLK
-- assigned-clock-rates : Shall be:
- 100Mhz (100000000) for SATA_RXOOB_CLK
- 100Mhz (100000000) for SATA_PMALIVE_CLK
-
-Example:
- sata@29000000 {
- compatible = "qcom,ipq806x-ahci", "generic-ahci";
- reg = <0x29000000 0x180>;
-
- interrupts = <0 209 0x0>;
-
- clocks = <&gcc SFAB_SATA_S_H_CLK>,
- <&gcc SATA_H_CLK>,
- <&gcc SATA_A_CLK>,
- <&gcc SATA_RXOOB_CLK>,
- <&gcc SATA_PMALIVE_CLK>;
- clock-names = "slave_iface", "iface", "core",
- "rxoob", "pmalive";
- assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
- assigned-clock-rates = <100000000>, <100000000>;
-
- phys = <&sata_phy>;
- phy-names = "sata-phy";
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/board/fsl,bcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Board Control and Status
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,mpc8360mds-bcsr
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ board@f8000000 {
+ compatible = "fsl,mpc8360mds-bcsr";
+ reg = <0xf8000000 0x8000>;
+ };
+
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/board/fsl,fpga-qixis-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale on-board FPGA connected on I2C bus
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,bsc9132qds-fpga
+ - const: fsl,fpga-qixis-i2c
+ - items:
+ - enum:
+ - fsl,ls1028aqds-fpga
+ - fsl,lx2160aqds-fpga
+ - const: fsl,fpga-qixis-i2c
+ - const: simple-mfd
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ mux-controller:
+ $ref: /schemas/mux/reg-mux.yaml
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ board-control@66 {
+ compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+ reg = <0x66>;
+ };
+ };
+
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ board-control@66 {
+ compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c",
+ "simple-mfd";
+ reg = <0x66>;
+
+ mux-controller {
+ compatible = "reg-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x54 0xf0>; /* 0: reg 0x54, bits 7:4 */
+ };
+ };
+ };
+
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/board/fsl,fpga-qixis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale on-board FPGA/CPLD
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: fsl,p1022ds-fpga
+ - const: fsl,fpga-ngpixis
+ - items:
+ - enum:
+ - fsl,ls1088aqds-fpga
+ - fsl,ls1088ardb-fpga
+ - fsl,ls2080aqds-fpga
+ - fsl,ls2080ardb-fpga
+ - const: fsl,fpga-qixis
+ - items:
+ - enum:
+ - fsl,ls1043aqds-fpga
+ - fsl,ls1043ardb-fpga
+ - fsl,ls1046aqds-fpga
+ - fsl,ls1046ardb-fpga
+ - fsl,ls208xaqds-fpga
+ - const: fsl,fpga-qixis
+ - const: simple-mfd
+ - enum:
+ - fsl,ls1043ardb-cpld
+ - fsl,ls1046ardb-cpld
+ - fsl,t1040rdb-cpld
+ - fsl,t1042rdb-cpld
+ - fsl,t1042rdb_pi-cpld
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ maxItems: 1
+
+patternProperties:
+ '^mdio-mux@[a-f0-9,]+$':
+ $ref: /schemas/net/mdio-mux-mmioreg.yaml
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ board-control@3 {
+ compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0x30>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW 0 0>;
+ };
+
+ - |
+ board-control@3 {
+ compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis";
+ reg = <0x3 0x10000>;
+ };
+
+++ /dev/null
-Freescale Reference Board Bindings
-
-This document describes device tree bindings for various devices that
-exist on some Freescale reference boards.
-
-* Board Control and Status (BCSR)
-
-Required properties:
-
- - compatible : Should be "fsl,<board>-bcsr"
- - reg : Offset and length of the register set for the device
-
-Example:
-
- bcsr@f8000000 {
- compatible = "fsl,mpc8360mds-bcsr";
- reg = <f8000000 8000>;
- };
-
-* Freescale on-board FPGA
-
-This is the memory-mapped registers for on board FPGA.
-
-Required properties:
-- compatible: should be a board-specific string followed by a string
- indicating the type of FPGA. Example:
- "fsl,<board>-fpga", "fsl,fpga-pixis", or
- "fsl,<board>-fpga", "fsl,fpga-qixis"
-- reg: should contain the address and the length of the FPGA register set.
-
-Optional properties:
-- interrupts: should specify event (wakeup) IRQ.
-
-Example (P1022DS):
-
- board-control@3,0 {
- compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
- reg = <3 0 0x30>;
- interrupt-parent = <&mpic>;
- interrupts = <8 8 0 0>;
- };
-
-Example (LS2080A-RDB):
-
- cpld@3,0 {
- compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis";
- reg = <0x3 0 0x10000>;
- };
-
-* Freescale on-board FPGA connected on I2C bus
-
-Some Freescale boards like BSC9132QDS have on board FPGA connected on
-the i2c bus.
-
-Required properties:
-- compatible: Should be a board-specific string followed by a string
- indicating the type of FPGA. Example:
- "fsl,<board>-fpga", "fsl,fpga-qixis-i2c"
-- reg: Should contain the address of the FPGA
-
-Example:
- fpga: fpga@66 {
- compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
- reg = <0x66>;
- };
-
-* Freescale on-board CPLD
-
-Some Freescale boards like T1040RDB have an on board CPLD connected.
-
-Required properties:
-- compatible: Should be a board-specific string like "fsl,<board>-cpld"
- Example:
- "fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
-- reg: should describe CPLD registers
-
-Example:
- cpld@3,0 {
- compatible = "fsl,t1040rdb-cpld";
- reg = <3 0 0x300>;
- };
+++ /dev/null
-Qualcomm External Bus Interface 2 (EBI2)
-
-The EBI2 contains two peripheral blocks: XMEM and LCDC. The XMEM handles any
-external memory (such as NAND or other memory-mapped peripherals) whereas
-LCDC handles LCD displays.
-
-As it says it connects devices to an external bus interface, meaning address
-lines (up to 9 address lines so can only address 1KiB external memory space),
-data lines (16 bits), OE (output enable), ADV (address valid, used on some
-NOR flash memories), WE (write enable). This on top of 6 different chip selects
-(CS0 thru CS5) so that in theory 6 different devices can be connected.
-
-Apparently this bus is clocked at 64MHz. It has dedicated pins on the package
-and the bus can only come out on these pins, however if some of the pins are
-unused they can be left unconnected or remuxed to be used as GPIO or in some
-cases other orthogonal functions as well.
-
-Also CS1 and CS2 has -A and -B signals. Why they have that is unclear to me.
-
-The chip selects have the following memory range assignments. This region of
-memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big.
-
-Chip Select Physical address base
-CS0 GPIO134 0x1a800000-0x1b000000 (8MB)
-CS1 GPIO39 (A) / GPIO123 (B) 0x1b000000-0x1b800000 (8MB)
-CS2 GPIO40 (A) / GPIO124 (B) 0x1b800000-0x1c000000 (8MB)
-CS3 GPIO133 0x1d000000-0x25000000 (128 MB)
-CS4 GPIO132 0x1c800000-0x1d000000 (8MB)
-CS5 GPIO131 0x1c000000-0x1c800000 (8MB)
-
-The APQ8060 Qualcomm Application Processor User Guide, 80-N7150-14 Rev. A,
-August 6, 2012 contains some incomplete documentation of the EBI2.
-
-FIXME: the manual mentions "write precharge cycles" and "precharge cycles".
-We have not been able to figure out which bit fields these correspond to
-in the hardware, or what valid values exist. The current hypothesis is that
-this is something just used on the FAST chip selects and that the SLOW
-chip selects are understood fully. There is also a "byte device enable"
-flag somewhere for 8bit memories.
-
-FIXME: The chipselects have SLOW and FAST configuration registers. It's a bit
-unclear what this means, if they are mutually exclusive or can be used
-together, or if some chip selects are hardwired to be FAST and others are SLOW
-by design.
-
-The XMEM registers are totally undocumented but could be partially decoded
-because the Cypress AN49576 Antioch Westbridge apparently has suspiciously
-similar register layout, see: http://www.cypress.com/file/105771/download
-
-Required properties:
-- compatible: should be one of:
- "qcom,msm8660-ebi2"
- "qcom,apq8060-ebi2"
-- #address-cells: should be <2>: the first cell is the chipselect,
- the second cell is the offset inside the memory range
-- #size-cells: should be <1>
-- ranges: should be set to:
- ranges = <0 0x0 0x1a800000 0x00800000>,
- <1 0x0 0x1b000000 0x00800000>,
- <2 0x0 0x1b800000 0x00800000>,
- <3 0x0 0x1d000000 0x08000000>,
- <4 0x0 0x1c800000 0x00800000>,
- <5 0x0 0x1c000000 0x00800000>;
-- reg: two ranges of registers: EBI2 config and XMEM config areas
-- reg-names: should be "ebi2", "xmem"
-- clocks: two clocks, EBI_2X and EBI
-- clock-names: should be "ebi2x", "ebi2"
-
-Optional subnodes:
-- Nodes inside the EBI2 will be considered device nodes.
-
-The following optional properties are properties that can be tagged onto
-any device subnode. We are assuming that there can be only ONE device per
-chipselect subnode, else the properties will become ambiguous.
-
-Optional properties arrays for SLOW chip selects:
-- qcom,xmem-recovery-cycles: recovery cycles is the time the memory continues to
- drive the data bus after OE is de-asserted, in order to avoid contention on
- the data bus. They are inserted when reading one CS and switching to another
- CS or read followed by write on the same CS. Valid values 0 thru 15. Minimum
- value is actually 1, so a value of 0 will still yield 1 recovery cycle.
-- qcom,xmem-write-hold-cycles: write hold cycles, these are extra cycles
- inserted after every write minimum 1. The data out is driven from the time
- WE is asserted until CS is asserted. With a hold of 1 (value = 0), the CS
- stays active for 1 extra cycle etc. Valid values 0 thru 15.
-- qcom,xmem-write-delta-cycles: initial latency for write cycles inserted for
- the first write to a page or burst memory. Valid values 0 thru 255.
-- qcom,xmem-read-delta-cycles: initial latency for read cycles inserted for the
- first read to a page or burst memory. Valid values 0 thru 255.
-- qcom,xmem-write-wait-cycles: number of wait cycles for every write access, 0=1
- cycle. Valid values 0 thru 15.
-- qcom,xmem-read-wait-cycles: number of wait cycles for every read access, 0=1
- cycle. Valid values 0 thru 15.
-
-Optional properties arrays for FAST chip selects:
-- qcom,xmem-address-hold-enable: this is a boolean property stating that we
- shall hold the address for an extra cycle to meet hold time requirements
- with ADV assertion.
-- qcom,xmem-adv-to-oe-recovery-cycles: the number of cycles elapsed before an OE
- assertion, with respect to the cycle where ADV (address valid) is asserted.
- 2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3.
-- qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a
- read transfer. For a single read transfer this will be the time from CS
- assertion to OE assertion. Valid values 0 thru 15.
-
-
-Example:
-
-ebi2@1a100000 {
- compatible = "qcom,apq8060-ebi2";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0x0 0x1a800000 0x00800000>,
- <1 0x0 0x1b000000 0x00800000>,
- <2 0x0 0x1b800000 0x00800000>,
- <3 0x0 0x1d000000 0x08000000>,
- <4 0x0 0x1c800000 0x00800000>,
- <5 0x0 0x1c000000 0x00800000>;
- reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
- reg-names = "ebi2", "xmem";
- clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
- clock-names = "ebi2x", "ebi2";
- /* Make sure to set up the pin control for the EBI2 */
- pinctrl-names = "default";
- pinctrl-0 = <&foo_ebi2_pins>;
-
- foo-ebi2@2,0 {
- compatible = "foo";
- reg = <2 0x0 0x100>;
- (...)
- qcom,xmem-recovery-cycles = <0>;
- qcom,xmem-write-hold-cycles = <3>;
- qcom,xmem-write-delta-cycles = <31>;
- qcom,xmem-read-delta-cycles = <28>;
- qcom,xmem-write-wait-cycles = <9>;
- qcom,xmem-read-wait-cycles = <9>;
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ebi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm External Bus Interface 2 (EBI2)
+
+description: |
+ The EBI2 contains two peripheral blocks: XMEM and LCDC. The XMEM handles any
+ external memory (such as NAND or other memory-mapped peripherals) whereas
+ LCDC handles LCD displays.
+
+ As it says it connects devices to an external bus interface, meaning address
+ lines (up to 9 address lines so can only address 1KiB external memory space),
+ data lines (16 bits), OE (output enable), ADV (address valid, used on some
+ NOR flash memories), WE (write enable). This on top of 6 different chip selects
+ (CS0 thru CS5) so that in theory 6 different devices can be connected.
+
+ Apparently this bus is clocked at 64MHz. It has dedicated pins on the package
+ and the bus can only come out on these pins, however if some of the pins are
+ unused they can be left unconnected or remuxed to be used as GPIO or in some
+ cases other orthogonal functions as well.
+
+ Also CS1 and CS2 has -A and -B signals. Why they have that is unclear to me.
+
+ The chip selects have the following memory range assignments. This region of
+ memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big.
+
+ Chip Select Physical address base
+ CS0 GPIO134 0x1a800000-0x1b000000 (8MB)
+ CS1 GPIO39 (A) / GPIO123 (B) 0x1b000000-0x1b800000 (8MB)
+ CS2 GPIO40 (A) / GPIO124 (B) 0x1b800000-0x1c000000 (8MB)
+ CS3 GPIO133 0x1d000000-0x25000000 (128 MB)
+ CS4 GPIO132 0x1c800000-0x1d000000 (8MB)
+ CS5 GPIO131 0x1c000000-0x1c800000 (8MB)
+
+ The APQ8060 Qualcomm Application Processor User Guide, 80-N7150-14 Rev. A,
+ August 6, 2012 contains some incomplete documentation of the EBI2.
+
+ FIXME: the manual mentions "write precharge cycles" and "precharge cycles".
+ We have not been able to figure out which bit fields these correspond to
+ in the hardware, or what valid values exist. The current hypothesis is that
+ this is something just used on the FAST chip selects and that the SLOW
+ chip selects are understood fully. There is also a "byte device enable"
+ flag somewhere for 8bit memories.
+
+ FIXME: The chipselects have SLOW and FAST configuration registers. It's a bit
+ unclear what this means, if they are mutually exclusive or can be used
+ together, or if some chip selects are hardwired to be FAST and others are SLOW
+ by design.
+
+ The XMEM registers are totally undocumented but could be partially decoded
+ because the Cypress AN49576 Antioch Westbridge apparently has suspiciously
+ similar register layout, see: http://www.cypress.com/file/105771/download
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,apq8060-ebi2
+ - qcom,msm8660-ebi2
+
+ reg:
+ items:
+ - description: EBI2 config region
+ - description: XMEM config region
+
+ reg-names:
+ items:
+ - const: ebi2
+ - const: xmem
+
+ ranges: true
+
+ clocks:
+ items:
+ - description: EBI_2X clock
+ - description: EBI clock
+
+ clock-names:
+ items:
+ - const: ebi2x
+ - const: ebi2
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ranges
+ - clocks
+ - clock-names
+ - '#address-cells'
+ - '#size-cells'
+
+patternProperties:
+ "^.*@[0-5],[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ reg:
+ maxItems: 1
+
+ # SLOW chip selects
+ qcom,xmem-recovery-cycles:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The time the memory continues to drive the data bus after OE
+ is de-asserted, in order to avoid contention on the data bus.
+ They are inserted when reading one CS and switching to another
+ CS or read followed by write on the same CS. Minimum value is
+ actually 1, so a value of 0 will still yield 1 recovery cycle.
+ minimum: 0
+ maximum: 15
+
+ qcom,xmem-write-hold-cycles:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The extra cycles inserted after every write minimum 1. The
+ data out is driven from the time WE is asserted until CS is
+ asserted. With a hold of 1 (value = 0), the CS stays active
+ for 1 extra cycle, etc.
+ minimum: 0
+ maximum: 15
+
+ qcom,xmem-write-delta-cycles:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The initial latency for write cycles inserted for the first
+ write to a page or burst memory.
+ minimum: 0
+ maximum: 255
+
+ qcom,xmem-read-delta-cycles:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The initial latency for read cycles inserted for the first
+ read to a page or burst memory.
+ minimum: 0
+ maximum: 255
+
+ qcom,xmem-write-wait-cycles:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The number of wait cycles for every write access.
+ minimum: 0
+ maximum: 15
+
+ qcom,xmem-read-wait-cycles:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The number of wait cycles for every read access.
+ minimum: 0
+ maximum: 15
+
+
+ # FAST chip selects
+ qcom,xmem-address-hold-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ Holds the address for an extra cycle to meet hold time
+ requirements with ADV assertion, when set to 1.
+ enum: [ 0, 1 ]
+
+ qcom,xmem-adv-to-oe-recovery-cycles:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The number of cycles elapsed before an OE assertion, with
+ respect to the cycle where ADV (address valid) is asserted.
+ minimum: 0
+ maximum: 3
+
+ qcom,xmem-read-hold-cycles:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The length in cycles of the first segment of a read transfer.
+ For a single read transfer this will be the time from CS
+ assertion to OE assertion.
+ minimum: 0
+ maximum: 15
+
+ required:
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8660.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ external-bus@1a100000 {
+ compatible = "qcom,msm8660-ebi2";
+ reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+ reg-names = "ebi2", "xmem";
+ ranges = <0 0x0 0x1a800000 0x00800000>,
+ <1 0x0 0x1b000000 0x00800000>,
+ <2 0x0 0x1b800000 0x00800000>,
+ <3 0x0 0x1d000000 0x08000000>,
+ <4 0x0 0x1c800000 0x00800000>,
+ <5 0x0 0x1c000000 0x00800000>;
+
+ clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+ clock-names = "ebi2x", "ebi2";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ethernet@2,0 {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ reg = <2 0x0 0x100>;
+
+ interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
+ <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+
+ phy-mode = "mii";
+ reg-io-width = <2>;
+ smsc,force-external-phy;
+ smsc,irq-push-pull;
+
+ /* SLOW chipselect config */
+ qcom,xmem-recovery-cycles = <0>;
+ qcom,xmem-write-hold-cycles = <3>;
+ qcom,xmem-write-delta-cycles = <31>;
+ qcom,xmem-read-delta-cycles = <28>;
+ qcom,xmem-write-wait-cycles = <9>;
+ qcom,xmem-read-wait-cycles = <9>;
+ };
+ };
items:
- description: input top pll
- description: input mclk pll
+ - description: input fix pll
clock-names:
items:
- const: top
- const: mclk
+ - const: fix
"#clock-cells":
const: 1
compatible = "amlogic,c3-pll-clkc";
reg = <0x0 0x8000 0x0 0x1a4>;
clocks = <&scmi_clk 2>,
- <&scmi_clk 5>;
- clock-names = "top", "mclk";
+ <&scmi_clk 5>,
+ <&scmi_clk 12>;
+ clock-names = "top", "mclk", "fix";
#clock-cells = <1>;
};
};
- atmel,sama5d3-pmc
- atmel,sama5d4-pmc
- microchip,sam9x60-pmc
+ - microchip,sam9x7-pmc
- microchip,sama7g5-pmc
- const: syscon
contains:
enum:
- microchip,sam9x60-pmc
+ - microchip,sam9x7-pmc
- microchip,sama7g5-pmc
then:
properties:
- atmel,sama5d4-sckc
- microchip,sam9x60-sckc
- items:
- - const: microchip,sama7g5-sckc
+ - enum:
+ - microchip,sam9x7-sckc
+ - microchip,sama7g5-sckc
- const: microchip,sam9x60-sckc
reg:
"#reset-cells":
const: 1
- clocks: true
+ clocks:
+ minItems: 3
+ maxItems: 4
- clock-names: true
+ clock-names:
+ minItems: 3
+ maxItems: 4
additionalProperties: false
minItems: 1
maxItems: 19
- clocks: true
- assigned-clocks: true
- assigned-clock-parents: true
+ clocks:
+ minItems: 1
+ maxItems: 19
additionalProperties: false
- compatible
- reg
- '#clock-cells'
- - idt,shutdown
- - idt,output-enable-active
allOf:
- if:
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
for the full list of i.MX8MP IMX8MP_CLK_AUDIOMIX_ clock IDs.
+ '#reset-cells':
+ const: 1
+
required:
- compatible
- reg
- mediatek,mt2701-apmixedsys
- mediatek,mt2712-apmixedsys
- mediatek,mt6765-apmixedsys
- - mediatek,mt6779-apmixedsys
+ - mediatek,mt6779-apmixed
- mediatek,mt6795-apmixedsys
- mediatek,mt7629-apmixedsys
- mediatek,mt8167-apmixedsys
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
+$id: http://devicetree.org/schemas/clock/mediatek,infracfg.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Infrastructure System Configuration Controller
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/mediatek,mt6795-sys-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: MediaTek System Clock Controller for MT6795
-
-maintainers:
- - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
- - Chun-Jie Chen <chun-jie.chen@mediatek.com>
-
-description:
- The Mediatek system clock controller provides various clocks and system
- configuration like reset and bus protection on MT6795.
-
-properties:
- compatible:
- items:
- - enum:
- - mediatek,mt6795-apmixedsys
- - mediatek,mt6795-infracfg
- - mediatek,mt6795-pericfg
- - mediatek,mt6795-topckgen
- - const: syscon
-
- reg:
- maxItems: 1
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
-required:
- - compatible
- - reg
- - '#clock-cells'
-
-additionalProperties: false
-
-examples:
- - |
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- topckgen: clock-controller@10000000 {
- compatible = "mediatek,mt6795-topckgen", "syscon";
- reg = <0 0x10000000 0 0x1000>;
- #clock-cells = <1>;
- };
- };
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-clock.yaml#
+$id: http://devicetree.org/schemas/clock/mediatek,mt8186-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Functional Clock Controller for MT8186
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#
+$id: http://devicetree.org/schemas/clock/mediatek,mt8186-sys-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek System Clock Controller for MT8186
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-clock.yaml#
+$id: http://devicetree.org/schemas/clock/mediatek,mt8192-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Functional Clock Controller for MT8192
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-sys-clock.yaml#
+$id: http://devicetree.org/schemas/clock/mediatek,mt8192-sys-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek System Clock Controller for MT8192
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-clock.yaml#
+$id: http://devicetree.org/schemas/clock/mediatek,mt8195-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Functional Clock Controller for MT8195
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-sys-clock.yaml#
+$id: http://devicetree.org/schemas/clock/mediatek,mt8195-sys-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek System Clock Controller for MT8195
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#
+$id: http://devicetree.org/schemas/clock/mediatek,pericfg.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Peripheral Configuration Controller
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Clock controller syscon's
+
+maintainers:
+ - Matthias Brugger <matthias.bgg@gmail.com>
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+ The MediaTek clock controller syscon's provide various clocks to the system.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2701-bdpsys
+ - mediatek,mt2701-imgsys
+ - mediatek,mt2701-vdecsys
+ - mediatek,mt2712-bdpsys
+ - mediatek,mt2712-imgsys
+ - mediatek,mt2712-jpgdecsys
+ - mediatek,mt2712-mcucfg
+ - mediatek,mt2712-mfgcfg
+ - mediatek,mt2712-vdecsys
+ - mediatek,mt2712-vencsys
+ - mediatek,mt6765-camsys
+ - mediatek,mt6765-imgsys
+ - mediatek,mt6765-mipi0a
+ - mediatek,mt6765-vcodecsys
+ - mediatek,mt6779-camsys
+ - mediatek,mt6779-imgsys
+ - mediatek,mt6779-ipesys
+ - mediatek,mt6779-mfgcfg
+ - mediatek,mt6779-vdecsys
+ - mediatek,mt6779-vencsys
+ - mediatek,mt6797-imgsys
+ - mediatek,mt6797-vdecsys
+ - mediatek,mt6797-vencsys
+ - mediatek,mt8167-imgsys
+ - mediatek,mt8167-mfgcfg
+ - mediatek,mt8167-vdecsys
+ - mediatek,mt8173-imgsys
+ - mediatek,mt8173-vdecsys
+ - mediatek,mt8173-vencltsys
+ - mediatek,mt8173-vencsys
+ - mediatek,mt8183-camsys
+ - mediatek,mt8183-imgsys
+ - mediatek,mt8183-ipu_conn
+ - mediatek,mt8183-ipu_adl
+ - mediatek,mt8183-ipu_core0
+ - mediatek,mt8183-ipu_core1
+ - mediatek,mt8183-mcucfg
+ - mediatek,mt8183-mfgcfg
+ - mediatek,mt8183-vdecsys
+ - mediatek,mt8183-vencsys
+ - const: syscon
+ - items:
+ - const: mediatek,mt7623-bdpsys
+ - const: mediatek,mt2701-bdpsys
+ - const: syscon
+ - items:
+ - const: mediatek,mt7623-imgsys
+ - const: mediatek,mt2701-imgsys
+ - const: syscon
+ - items:
+ - const: mediatek,mt7623-vdecsys
+ - const: mediatek,mt2701-vdecsys
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@11220000 {
+ compatible = "mediatek,mt2701-bdpsys", "syscon";
+ reg = <0x11220000 0x2000>;
+ #clock-cells = <1>;
+ };
- nxp,imx95-lvds-csr
- nxp,imx95-display-csr
- nxp,imx95-camera-csr
+ - nxp,imx95-netcmix-blk-ctrl
- nxp,imx95-vpu-csr
- const: syscon
+++ /dev/null
-NXP LPC32xx Clock Controller
-
-Required properties:
-- compatible: should be "nxp,lpc3220-clk"
-- reg: should contain clock controller registers location and length
-- #clock-cells: must be 1, the cell holds id of a clock provided by the
- clock controller
-- clocks: phandles of external oscillators, the list must contain one
- 32768 Hz oscillator and may have one optional high frequency oscillator
-- clock-names: list of external oscillator clock names, must contain
- "xtal_32k" and may have optional "xtal"
-
-Examples:
-
- /* System Control Block */
- scb {
- compatible = "simple-bus";
- ranges = <0x0 0x040004000 0x00001000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- clk: clock-controller@0 {
- compatible = "nxp,lpc3220-clk";
- reg = <0x00 0x114>;
- #clock-cells = <1>;
-
- clocks = <&xtal_32k>, <&xtal>;
- clock-names = "xtal_32k", "xtal";
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,lpc3220-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx Clock Controller
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+ compatible:
+ const: nxp,lpc3220-clk
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: External 32768 Hz oscillator.
+ - description: Optional high frequency oscillator.
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: xtal_32k
+ - const: xtal
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@0 {
+ compatible = "nxp,lpc3220-clk";
+ reg = <0x00 0x114>;
+ #clock-cells = <1>;
+ clocks = <&xtal_32k>, <&xtal>;
+ clock-names = "xtal_32k", "xtal";
+ };
+++ /dev/null
-NXP LPC32xx USB Clock Controller
-
-Required properties:
-- compatible: should be "nxp,lpc3220-usb-clk"
-- reg: should contain clock controller registers location and length
-- #clock-cells: must be 1, the cell holds id of a clock provided by the
- USB clock controller
-
-Examples:
-
- usb {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x31020000 0x00001000>;
-
- usbclk: clock-controller@f00 {
- compatible = "nxp,lpc3220-usb-clk";
- reg = <0xf00 0x100>;
- #clock-cells = <1>;
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,lpc3220-usb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx USB Clock Controller
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+ compatible:
+ const: nxp,lpc3220-usb-clk
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@f00 {
+ compatible = "nxp,lpc3220-usb-clk";
+ reg = <0xf00 0x100>;
+ #clock-cells = <1>;
+ };
- qcom,ipq6018-a53pll
- qcom,ipq8074-a53pll
- qcom,ipq9574-a73pll
+ - qcom,msm8226-a7pll
- qcom,msm8916-a53pll
- qcom,msm8939-a53pll
operating-points-v2: true
+ opp-table:
+ type: object
+
required:
- compatible
- reg
- description: USB PCIE wrapper pipe clock source
'#power-domain-cells': false
+ '#interconnect-cells':
+ const: 1
required:
- compatible
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcs404-turingcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Turing Clock & Reset Controller on QCS404
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+ compatible:
+ const: qcom,qcs404-turingcc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+ clock-controller@800000 {
+ compatible = "qcom,qcs404-turingcc";
+ reg = <0x00800000 0x30000>;
+ clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
- |
rpm {
rpm-requests {
- compatible = "qcom,rpm-msm8916";
+ compatible = "qcom,rpm-msm8916", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
clock-controller {
properties:
compatible:
- enum:
- - qcom,sc8280xp-lpassaudiocc
- - qcom,sc8280xp-lpasscc
+ oneOf:
+ - enum:
+ - qcom,sc8280xp-lpassaudiocc
+ - qcom,sc8280xp-lpasscc
+ - items:
+ - const: qcom,x1e80100-lpassaudiocc
+ - const: qcom,sc8280xp-lpassaudiocc
+ - items:
+ - const: qcom,x1e80100-lpasscc
+ - const: qcom,sc8280xp-lpasscc
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm4450-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM4450
+
+maintainers:
+ - Ajit Pandey <quic_ajipan@quicinc.com>
+ - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+ Qualcomm camera clock control module provides the clocks, resets and power
+ domains on SM4450
+
+ See also:: include/dt-bindings/clock/qcom,sm4450-camcc.h
+
+properties:
+ compatible:
+ const: qcom,sm4450-camcc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Camera AHB clock source from GCC
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,sm4450-gcc.h>
+ clock-controller@ade0000 {
+ compatible = "qcom,sm4450-camcc";
+ reg = <0x0ade0000 0x20000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_CAMERA_AHB_CLK>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm4450-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM4450
+
+maintainers:
+ - Ajit Pandey <quic_ajipan@quicinc.com>
+ - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+ Qualcomm display clock control module provides the clocks, resets and power
+ domains on SM4450
+
+ See also:: include/dt-bindings/clock/qcom,sm4450-dispcc.h
+
+properties:
+ compatible:
+ const: qcom,sm4450-dispcc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board active XO source
+ - description: Display AHB clock source from GCC
+ - description: sleep clock source
+ - description: Byte clock from DSI PHY0
+ - description: Pixel clock from DSI PHY0
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,sm4450-gcc.h>
+ clock-controller@af00000 {
+ compatible = "qcom,sm4450-dispcc";
+ reg = <0x0af00000 0x20000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&sleep_clk>,
+ <&dsi0_phy_pll_out_byteclk>,
+ <&dsi0_phy_pll_out_dsiclk>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8150-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM8150
+
+maintainers:
+ - Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+
+description: |
+ Qualcomm camera clock control module provides the clocks, resets and
+ power domains on SM8150.
+
+ See also:: include/dt-bindings/clock/qcom,sm8150-camcc.h
+
+properties:
+ compatible:
+ const: qcom,sm8150-camcc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Camera AHB clock from GCC
+
+ power-domains:
+ maxItems: 1
+ description:
+ A phandle and PM domain specifier for the MMCX power domain.
+
+ required-opps:
+ maxItems: 1
+ description:
+ A phandle to an OPP node describing required MMCX performance point.
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - required-opps
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ clock-controller@ad00000 {
+ compatible = "qcom,sm8150-camcc";
+ reg = <0x0ad00000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_CAMERA_AHB_CLK>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
include/dt-bindings/clock/qcom,sm8650-camcc.h
include/dt-bindings/clock/qcom,x1e80100-camcc.h
-allOf:
- - $ref: qcom,gcc.yaml#
-
properties:
compatible:
enum:
- compatible
- clocks
- power-domains
- - required-opps
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-camcc
+ - qcom,sm8450-camcc
+ - qcom,sm8550-camcc
+ - qcom,x1e80100-camcc
+ then:
+ required:
+ - required-opps
unevaluatedProperties: false
domains on Qualcomm SoCs.
See also::
+ include/dt-bindings/clock/qcom,sm4450-gpucc.h
include/dt-bindings/clock/qcom,sm8450-gpucc.h
include/dt-bindings/clock/qcom,sm8550-gpucc.h
include/dt-bindings/reset/qcom,sm8450-gpucc.h
properties:
compatible:
enum:
+ - qcom,sm4450-gpucc
- qcom,sm8450-gpucc
- qcom,sm8550-gpucc
- qcom,sm8650-gpucc
- compatible
- clocks
- power-domains
- - required-opps
- '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8450-videocc
+ - qcom,sm8550-videocc
+ then:
+ required:
+ - required-opps
unevaluatedProperties: false
+++ /dev/null
-Qualcomm Turing Clock & Reset Controller Binding
-------------------------------------------------
-
-Required properties :
-- compatible: shall contain "qcom,qcs404-turingcc".
-- reg: shall contain base register location and length.
-- clocks: ahb clock for the TuringCC
-- #clock-cells: from common clock binding, shall contain 1.
-- #reset-cells: from common reset binding, shall contain 1.
-
-Example:
- turingcc: clock-controller@800000 {
- compatible = "qcom,qcs404-turingcc";
- reg = <0x00800000 0x30000>;
- clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
-
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
reg:
maxItems: 1
- clocks: true
+ clocks:
+ minItems: 1
+ maxItems: 3
'#clock-cells':
const: 1
- clock-output-names: true
+ clock-output-names:
+ minItems: 3
+ maxItems: 17
renesas,mode:
description: Board-specific settings of the MD_CK* bits on R-Mobile A1
- renesas,r8a7745-cpg-mssr # RZ/G1E
- renesas,r8a77470-cpg-mssr # RZ/G1C
- renesas,r8a774a1-cpg-mssr # RZ/G2M
+ - renesas,r8a774a3-cpg-mssr # RZ/G2M v3.0
- renesas,r8a774b1-cpg-mssr # RZ/G2N
- renesas,r8a774c0-cpg-mssr # RZ/G2E
- renesas,r8a774e1-cpg-mssr # RZ/G2H
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,rzv2h-cpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) Clock Pulse Generator (CPG)
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+ On Renesas RZ/V2H(P) SoCs, the CPG (Clock Pulse Generator) handles generation
+ and control of clock signals for the IP modules, generation and control of resets,
+ and control over booting, low power consumption and power supply domains.
+
+properties:
+ compatible:
+ const: renesas,r9a09g057-cpg
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: AUDIO_EXTAL clock input
+ - description: RTXIN clock input
+ - description: QEXTAL clock input
+
+ clock-names:
+ items:
+ - const: audio_extal
+ - const: rtxin
+ - const: qextal
+
+ '#clock-cells':
+ description: |
+ - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+ and a core clock reference, as defined in
+ <dt-bindings/clock/renesas,r9a09g057-cpg.h>,
+ - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+ a module number. The module number is calculated as the CLKON register
+ offset index multiplied by 16, plus the actual bit in the register
+ used to turn the CLK ON. For example, for CGC_GIC_0_GICCLK, the
+ calculation is (1 * 16 + 3) = 0x13.
+ const: 2
+
+ '#power-domain-cells':
+ const: 0
+
+ '#reset-cells':
+ description:
+ The single reset specifier cell must be the reset number. The reset number
+ is calculated as the reset register offset index multiplied by 16, plus the
+ actual bit in the register used to reset the specific IP block. For example,
+ for SYS_0_PRESETN, the calculation is (3 * 16 + 0) = 0x30.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#power-domain-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@10420000 {
+ compatible = "renesas,r9a09g057-cpg";
+ reg = <0x10420000 0x10000>;
+ clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>;
+ clock-names = "audio_extal", "rtxin", "qextal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3576-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3576 Family Clock and Reset Control Module
+
+maintainers:
+ - Elaine Zhang <zhangqing@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+ - Detlev Casanova <detlev.casanova@collabora.com>
+
+description:
+ The RK3576 clock controller generates the clock and also implements a reset
+ controller for SoC peripherals. For example it provides SCLK_UART2 and
+ PCLK_UART2, as well as SRST_P_UART2 and SRST_S_UART2 for the second UART
+ module.
+
+properties:
+ compatible:
+ const: rockchip,rk3576-cru
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: xin24m
+ - const: xin32k
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@27200000 {
+ compatible = "rockchip,rk3576-cru";
+ reg = <0xfd7c0000 0x5c000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
- const: xin24m
- const: xin32k
- assigned-clocks: true
-
- assigned-clock-rates: true
-
rockchip,grf:
$ref: /schemas/types.yaml#/definitions/phandle
description: >
- samsung,exynosautov9-cmu-top
- samsung,exynosautov9-cmu-busmc
- samsung,exynosautov9-cmu-core
+ - samsung,exynosautov9-cmu-dpum
- samsung,exynosautov9-cmu-fsys0
- samsung,exynosautov9-cmu-fsys1
- samsung,exynosautov9-cmu-fsys2
- const: oscclk
- const: dout_clkcmu_core_bus
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov9-cmu-dpum
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: DPU Main bus clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: bus
+
- if:
properties:
compatible:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov920-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung ExynosAuto v920 SoC clock controller
+
+maintainers:
+ - Sunyeal Hong <sunyeal.hong@samsung.com>
+ - Chanwoo Choi <cw00.choi@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+ ExynosAuto v920 clock controller is comprised of several CMU units, generating
+ clocks for different domains. Those CMU units are modeled as separate device
+ tree nodes, and might depend on each other. Root clocks in that clock tree are
+ two external clocks:: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+ The external OSCCLK must be defined as fixed-rate clock in dts.
+
+ CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+ dividers; all other clocks of function blocks (other CMUs) are usually
+ derived from CMU_TOP.
+
+ Each clock is assigned an identifier and client nodes can use this identifier
+ to specify the clock which they consume. All clocks available for usage
+ in clock consumer nodes are defined as preprocessor macros in
+ 'include/dt-bindings/clock/samsung,exynosautov920.h' header.
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynosautov920-cmu-top
+ - samsung,exynosautov920-cmu-peric0
+ - samsung,exynosautov920-cmu-peric1
+ - samsung,exynosautov920-cmu-misc
+ - samsung,exynosautov920-cmu-hsi0
+ - samsung,exynosautov920-cmu-hsi1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+
+ "#clock-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov920-cmu-top
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (38.4 MHz)
+
+ clock-names:
+ items:
+ - const: oscclk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynosautov920-cmu-peric0
+ - samsung,exynosautov920-cmu-peric1
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (38.4 MHz)
+ - description: CMU_PERICn NOC clock (from CMU_TOP)
+ - description: CMU_PERICn IP clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: noc
+ - const: ip
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - samsung,exynosautov920-cmu-misc
+ - samsung,exynosautov920-cmu-hsi0
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (38.4 MHz)
+ - description: CMU_MISC/CMU_HSI0 NOC clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: noc
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov920-cmu-hsi1
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (38.4 MHz)
+ - description: CMU_HSI1 NOC clock (from CMU_TOP)
+ - description: CMU_HSI1 USBDRD clock (from CMU_TOP)
+ - description: CMU_HSI1 MMC_CARD clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: noc
+ - const: usbdrd
+ - const: mmc_card
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clocks
+ - clock-names
+ - reg
+
+additionalProperties: false
+
+examples:
+ # Clock controller node for CMU_PERIC0
+ - |
+ #include <dt-bindings/clock/samsung,exynosautov920.h>
+
+ cmu_peric0: clock-controller@10800000 {
+ compatible = "samsung,exynosautov920-cmu-peric0";
+ reg = <0x10800000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_PERIC0_NOC>,
+ <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
+ clock-names = "oscclk",
+ "noc",
+ "ip";
+ };
+
+...
- st,stm32mp1-rcc
- st,stm32mp13-rcc
- const: syscon
- clocks: true
- clock-names: true
+
+ clocks:
+ minItems: 1
+ maxItems: 5
+
+ clock-names:
+ minItems: 1
+ maxItems: 5
reg:
maxItems: 1
This property is required in idle state nodes of device tree meant
for RISC-V systems. For more details on the suspend_type parameter
- refer the SBI specifiation v0.3 (or higher) [7].
+ refer the SBI specification v0.3 (or higher) [7].
local-timer-stop:
description:
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/cpu/nvidia,tegra186-ccplex-cluster.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NVIDIA Tegra186 CCPLEX Cluster
-
-maintainers:
- - Thierry Reding <thierry.reding@gmail.com>
- - Jon Hunter <jonathanh@nvidia.com>
-
-properties:
- compatible:
- const: nvidia,tegra186-ccplex-cluster
-
- reg:
- maxItems: 1
-
- nvidia,bpmp:
- description: phandle to the BPMP used to query CPU frequency tables
- $ref: /schemas/types.yaml#/definitions/phandle
-
-additionalProperties: false
-
-required:
- - compatible
- - reg
- - nvidia,bpmp
-
-examples:
- - |
- ccplex@e000000 {
- compatible = "nvidia,tegra186-ccplex-cluster";
- reg = <0x0e000000 0x400000>;
- nvidia,bpmp = <&bpmp>;
- };
- const: fsl,sec-v4.0-rtic
reg:
- maxItems: 1
+ items:
+ - description: RTIC control and status register space.
+ - description: RTIC recoverable error indication register space.
+ minItems: 1
ranges:
maxItems: 1
- qcom,prng-ee # 8996 and later using EE
- items:
- enum:
+ - qcom,sa8255p-trng
- qcom,sa8775p-trng
- qcom,sc7280-trng
- qcom,sm8450-trng
reference to a valid DPI output or input endpoint node.
port@2:
- $ref: /schemas/graph.yaml#/properties/port
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description: |
eDP/DP output port. The remote endpoint phandle should be a
reference to a valid eDP panel input endpoint node. This port is
optional, treated as DP panel if not defined
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ toshiba,pre-emphasis:
+ description:
+ Display port output Pre-Emphasis settings for both DP lanes.
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 2
+ maxItems: 2
+ items:
+ enum:
+ - 0 # No pre-emphasis
+ - 1 # 3.5dB pre-emphasis
+ - 2 # 6dB pre-emphasis
+
oneOf:
- required:
- port@0
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/elgin,jg10309-01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elgin JG10309-01 SPI-controlled display
+
+maintainers:
+ - Fabio Estevam <festevam@gmail.com>
+
+description: |
+ The Elgin JG10309-01 SPI-controlled display is used on the RV1108-Elgin-r1
+ board and is a custom display.
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: elgin,jg10309-01
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 24000000
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+required:
+ - compatible
+ - reg
+ - spi-cpha
+ - spi-cpol
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0 {
+ compatible = "elgin,jg10309-01";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ spi-cpha;
+ spi-cpol;
+ };
+ };
- const: disp_axi
minItems: 1
+ dmas:
+ items:
+ - description: DMA specifier for the RX DMA channel.
+
+ dma-names:
+ items:
+ - const: rx
+
interrupts:
items:
- description: LCDIF DMA interrupt
interrupts:
maxItems: 1
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx28-lcdif
+ then:
+ properties:
+ dmas: false
+ dma-names: false
+
examples:
- |
#include <dt-bindings/clock/imx6sx-clock.h>
description:
This binding extends the data mapping defined in lvds-data-mapping.yaml.
It supports reversing the bit order on the formats defined there in order
- to accomodate for even more specialized data formats, since a variety of
+ to accommodate for even more specialized data formats, since a variety of
data formats and layouts is used to drive LVDS displays.
properties:
- const: default
- const: sleep
+ power-domains:
+ description: |
+ The MediaTek DPI module is typically associated with one of the
+ following multimedia power domains:
+ POWER_DOMAIN_DISPLAY
+ POWER_DOMAIN_VDOSYS
+ POWER_DOMAIN_MM
+ The specific power domain used varies depending on the SoC design.
+
+ It is recommended to explicitly add the appropriate power domain
+ property to the DPI node in the device tree.
+ maxItems: 1
+
port:
$ref: /schemas/graph.yaml#/properties/port
description:
description: A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle. See
Documentation/devicetree/bindings/power/power-domain.yaml for details.
+ maxItems: 1
mediatek,gce-client-reg:
description:
clocks:
items:
- description: SPLIT Clock
+ - description: Used for interfacing with the HDMI RX signal source.
+ - description: Paired with receiving HDMI RX metadata.
+ minItems: 1
required:
- compatible
const: mediatek,mt8195-mdp3-split
then:
+ properties:
+ clocks:
+ minItems: 3
+
required:
- mediatek,gce-client-reg
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8173-disp-split
+
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
additionalProperties: false
examples:
- qcom,hdmi-tx-8974
- qcom,hdmi-tx-8994
- qcom,hdmi-tx-8996
+ - qcom,hdmi-tx-8998
clocks:
minItems: 1
- maxItems: 5
+ maxItems: 8
clock-names:
minItems: 1
- maxItems: 5
+ maxItems: 8
reg:
minItems: 1
properties:
clocks:
minItems: 5
+ maxItems: 5
clock-names:
items:
- const: mdp_core
- const: extp
hdmi-mux-supplies: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,hdmi-tx-8998
+ then:
+ properties:
+ clocks:
+ minItems: 8
+ maxItems: 8
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: iface
+ - const: core
+ - const: alt_iface
+ - const: extp
+ - const: bus
+ - const: mnoc
+ - const: iface_mmss
+
additionalProperties: false
examples:
maintainers:
- Manuel Traut <manut@mecka.net>
-allOf:
- - $ref: panel-common.yaml#
-
properties:
compatible:
enum:
# BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
- boe,th101mb31ig002-28a
+ # The Starry-er88577 is a 10.1" WXGA TFT-LCD panel
+ - starry,er88577
reg:
maxItems: 1
backlight: true
enable-gpios: true
+ reset-gpios: true
power-supply: true
port: true
rotation: true
- enable-gpios
- power-supply
+allOf:
+ - $ref: panel-common.yaml#
+ - if:
+ properties:
+ compatible:
+ # The Starry-er88577 is a 10.1" WXGA TFT-LCD panel
+ const: starry,er88577
+ then:
+ properties:
+ reset-gpios: false
+ else:
+ required:
+ - reset-gpios
+
additionalProperties: false
examples:
reg = <0>;
backlight = <&backlight_lcd0>;
enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
rotation = <90>;
power-supply = <&vcc_3v3>;
port {
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-ll2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-LL2 DSI Display Panel
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: boe,tv101wum-ll2
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ backlight: true
+ reset-gpios: true
+ vsp-supply: true
+ vsn-supply: true
+ port: true
+ rotation: true
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - vsp-supply
+ - vsn-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "boe,tv101wum-ll2";
+ reg = <0>;
+
+ vsn-supply = <&vsn_lcd>;
+ vsp-supply = <&vsp_lcd>;
+
+ reset-gpios = <&pio 45 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with
a MIPI-DSI video interface.
-allOf:
- - $ref: panel-common.yaml#
-
properties:
compatible:
items:
- enum:
- hannstar,hsd060bhw4
+ - microchip,ac40t08a-mipi-panel
- powkiddy,x55-panel
- const: himax,hx8394
required:
- compatible
- reg
- - reset-gpios
- backlight
- port
- vcc-supply
additionalProperties: false
+allOf:
+ - $ref: panel-common.yaml#
+ - if:
+ not:
+ properties:
+ compatible:
+ enum:
+ - microchip,ac40t08a-mipi-panel
+ then:
+ required:
+ - reset-gpios
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
compatible:
items:
- enum:
+ - densitron,dmt028vghmcmi-1d
- ortustech,com35h3p70ulc
- const: ilitek,ili9806e
- enum:
- chongzhou,cz101b4001
- kingdisplay,kd101ne3-40ti
+ - melfas,lmfbx101117480
- radxa,display-10hd-ad001
- radxa,display-8hd-ad002
- const: jadard,jd9365da-h3
- port@0
- port@1
- backlight: true
- enable-gpios: true
- power-supply: true
-
-additionalProperties: false
+unevaluatedProperties: false
required:
- compatible
- innolux,at070tn92
# Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel
- innolux,g070ace-l01
+ # Innolux G070ACE-LH3 7" WVGA (800x480) TFT LCD panel with WLED backlight
+ - innolux,g070ace-lh3
# Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
- innolux,g070y2-l01
# Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel
- okaya,rs800480t-7x0gp
# Olimex 4.3" TFT LCD panel
- olimex,lcd-olinuxino-43-ts
+ # On Tat Industrial Company 5" DPI TFT panel.
+ - ontat,kd50g21-40nt-a1
# On Tat Industrial Company 7" DPI TFT panel.
- ontat,yx700wv03
# OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel
which has built-in ST7701 chip.
-allOf:
- - $ref: panel-common.yaml#
-
properties:
compatible:
items:
- enum:
- anbernic,rg-arc-panel
+ - anbernic,rg28xx-panel
- densitron,dmt028vghmcmi-1a
- elida,kd50t048a
- techstar,ts8550b
- const: sitronix,st7701
reg:
- description: DSI virtual channel used by that screen
+ description: DSI / SPI channel used by that screen
maxItems: 1
VCC-supply:
IOVCC-supply:
description: I/O system regulator
+ dc-gpios:
+ maxItems: 1
+ description:
+ Controller data/command selection (D/CX) in 4-line SPI mode.
+ If not set, the controller is in 3-line SPI mode.
+ Disallowed for DSI.
+
port: true
reset-gpios: true
rotation: true
- port
- reset-gpios
-additionalProperties: false
+allOf:
+ - $ref: panel-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ # SPI connected panels
+ enum:
+ - anbernic,rg28xx-panel
+ then:
+ $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ # DSI or SPI without D/CX pin
+ enum:
+ - anbernic,rg-arc-panel
+ - anbernic,rg28xx-panel
+ - densitron,dmt028vghmcmi-1a
+ - elida,kd50t048a
+ - techstar,ts8550b
+ then:
+ required:
+ - dc-gpios
+ else:
+ properties:
+ dc-gpios: false
+
+unevaluatedProperties: false
examples:
- |
};
};
};
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "anbernic,rg28xx-panel", "sitronix,st7701";
+ reg = <0>;
+ spi-max-frequency = <3125000>;
+ VCC-supply = <®_lcd>;
+ IOVCC-supply = <®_lcd>;
+ reset-gpios = <&pio 8 14 GPIO_ACTIVE_HIGH>; /* LCD-RST: PI14 */
+ backlight = <&backlight>;
+
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <&tcon_lcd0_out_lcd>;
+ };
+ };
+ };
+ };
compatible:
oneOf:
- enum:
+ - renesas,r9a07g043u-du # RZ/G2UL
- renesas,r9a07g044-du # RZ/G2{L,LC}
- items:
- enum:
$ref: /schemas/graph.yaml#/properties/port
unevaluatedProperties: false
- required:
- - port@0
-
unevaluatedProperties: false
renesas,vsps:
additionalProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a07g043u-du
+ then:
+ properties:
+ ports:
+ properties:
+ port@0:
+ description: DPI
+
+ required:
+ - port@0
+ else:
+ properties:
+ ports:
+ properties:
+ port@0:
+ description: DSI
+ port@1:
+ description: DPI
+
+ required:
+ - port@0
+ - port@1
+
examples:
# RZ/G2L DU
- |
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/cirrus,ep9301-dma-m2m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx SoC DMA controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-dma-m2m
+ - items:
+ - enum:
+ - cirrus,ep9302-dma-m2m
+ - cirrus,ep9307-dma-m2m
+ - cirrus,ep9312-dma-m2m
+ - cirrus,ep9315-dma-m2m
+ - const: cirrus,ep9301-dma-m2m
+
+ reg:
+ items:
+ - description: m2m0 channel registers
+ - description: m2m1 channel registers
+
+ clocks:
+ items:
+ - description: m2m0 channel gate clock
+ - description: m2m1 channel gate clock
+
+ clock-names:
+ items:
+ - const: m2m0
+ - const: m2m1
+
+ interrupts:
+ items:
+ - description: m2m0 channel interrupt
+ - description: m2m1 channel interrupt
+
+ '#dma-cells':
+ const: 2
+ description: |
+ The first cell is the unique device channel number as indicated by this
+ table for ep93xx:
+
+ 10: SPI controller
+ 11: IDE controller
+
+ The second cell is the DMA direction line number:
+
+ 1: Memory to device
+ 2: Device to memory
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+ dma-controller@80000100 {
+ compatible = "cirrus,ep9301-dma-m2m";
+ reg = <0x80000100 0x0040>,
+ <0x80000140 0x0040>;
+ clocks = <&syscon EP93XX_CLK_M2M0>,
+ <&syscon EP93XX_CLK_M2M1>;
+ clock-names = "m2m0", "m2m1";
+ interrupt-parent = <&vic0>;
+ interrupts = <17>, <18>;
+ #dma-cells = <2>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/cirrus,ep9301-dma-m2p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx SoC M2P DMA controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-dma-m2p
+ - items:
+ - enum:
+ - cirrus,ep9302-dma-m2p
+ - cirrus,ep9307-dma-m2p
+ - cirrus,ep9312-dma-m2p
+ - cirrus,ep9315-dma-m2p
+ - const: cirrus,ep9301-dma-m2p
+
+ reg:
+ items:
+ - description: m2p0 channel registers
+ - description: m2p1 channel registers
+ - description: m2p2 channel registers
+ - description: m2p3 channel registers
+ - description: m2p4 channel registers
+ - description: m2p5 channel registers
+ - description: m2p6 channel registers
+ - description: m2p7 channel registers
+ - description: m2p8 channel registers
+ - description: m2p9 channel registers
+
+ clocks:
+ items:
+ - description: m2p0 channel gate clock
+ - description: m2p1 channel gate clock
+ - description: m2p2 channel gate clock
+ - description: m2p3 channel gate clock
+ - description: m2p4 channel gate clock
+ - description: m2p5 channel gate clock
+ - description: m2p6 channel gate clock
+ - description: m2p7 channel gate clock
+ - description: m2p8 channel gate clock
+ - description: m2p9 channel gate clock
+
+ clock-names:
+ items:
+ - const: m2p0
+ - const: m2p1
+ - const: m2p2
+ - const: m2p3
+ - const: m2p4
+ - const: m2p5
+ - const: m2p6
+ - const: m2p7
+ - const: m2p8
+ - const: m2p9
+
+ interrupts:
+ items:
+ - description: m2p0 channel interrupt
+ - description: m2p1 channel interrupt
+ - description: m2p2 channel interrupt
+ - description: m2p3 channel interrupt
+ - description: m2p4 channel interrupt
+ - description: m2p5 channel interrupt
+ - description: m2p6 channel interrupt
+ - description: m2p7 channel interrupt
+ - description: m2p8 channel interrupt
+ - description: m2p9 channel interrupt
+
+ '#dma-cells':
+ const: 2
+ description: |
+ The first cell is the unique device channel number as indicated by this
+ table for ep93xx:
+
+ 0: I2S channel 1
+ 1: I2S channel 2 (unused)
+ 2: AC97 channel 1 (unused)
+ 3: AC97 channel 2 (unused)
+ 4: AC97 channel 3 (unused)
+ 5: I2S channel 3 (unused)
+ 6: UART1 (unused)
+ 7: UART2 (unused)
+ 8: UART3 (unused)
+ 9: IRDA (unused)
+
+ The second cell is the DMA direction line number:
+
+ 1: Memory to device
+ 2: Device to memory
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+ dma-controller@80000000 {
+ compatible = "cirrus,ep9301-dma-m2p";
+ reg = <0x80000000 0x0040>,
+ <0x80000040 0x0040>,
+ <0x80000080 0x0040>,
+ <0x800000c0 0x0040>,
+ <0x80000240 0x0040>,
+ <0x80000200 0x0040>,
+ <0x800002c0 0x0040>,
+ <0x80000280 0x0040>,
+ <0x80000340 0x0040>,
+ <0x80000300 0x0040>;
+ clocks = <&syscon EP93XX_CLK_M2P0>,
+ <&syscon EP93XX_CLK_M2P1>,
+ <&syscon EP93XX_CLK_M2P2>,
+ <&syscon EP93XX_CLK_M2P3>,
+ <&syscon EP93XX_CLK_M2P4>,
+ <&syscon EP93XX_CLK_M2P5>,
+ <&syscon EP93XX_CLK_M2P6>,
+ <&syscon EP93XX_CLK_M2P7>,
+ <&syscon EP93XX_CLK_M2P8>,
+ <&syscon EP93XX_CLK_M2P9>;
+ clock-names = "m2p0", "m2p1",
+ "m2p2", "m2p3",
+ "m2p4", "m2p5",
+ "m2p6", "m2p7",
+ "m2p8", "m2p9";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+ #dma-cells = <2>;
+ };
- description: DMA Error interrupt
minItems: 1
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: ahb
+
"#dma-cells":
const: 1
- reg
- interrupts
- "#dma-cells"
+ - clocks
+ - clock-names
additionalProperties: false
examples:
- |
+ #include <dt-bindings/clock/imx27-clock.h>
+
dma-controller@10001000 {
compatible = "fsl,imx27-dma";
reg = <0x10001000 0x1000>;
interrupts = <32 33>;
#dma-cells = <1>;
dma-channels = <16>;
+ clocks = <&clks IMX27_CLK_DMA_IPG_GATE>, <&clks IMX27_CLK_DMA_AHB_GATE>;
+ clock-names = "ipg", "ahb";
};
allOf:
- $ref: dma-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qxp-dma-apbh
+ then:
+ required:
+ - power-domains
+ else:
+ properties:
+ power-domains: false
properties:
compatible:
- fsl,imx6q-dma-apbh
- fsl,imx6sx-dma-apbh
- fsl,imx7d-dma-apbh
+ - fsl,imx8qxp-dma-apbh
- const: fsl,imx28-dma-apbh
- enum:
- fsl,imx23-dma-apbh
dma-channels:
enum: [4, 8, 16]
+ power-domains:
+ maxItems: 1
+
required:
- compatible
- reg
properties:
compatible:
- enum:
- - fsl,ls1021a-qdma
- - fsl,ls1028a-qdma
- - fsl,ls1043a-qdma
- - fsl,ls1046a-qdma
+ oneOf:
+ - const: fsl,ls1021a-qdma
+ - items:
+ - enum:
+ - fsl,ls1028a-qdma
+ - fsl,ls1043a-qdma
+ - fsl,ls1046a-qdma
+ - const: fsl,ls1021a-qdma
reg:
items:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/loongson,ls1b-apbdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 APB DMA Controller
+
+maintainers:
+ - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+ Loongson-1 APB DMA controller provides 3 independent channels for
+ peripherals such as NAND, audio playback and capture.
+
+properties:
+ compatible:
+ oneOf:
+ - const: loongson,ls1b-apbdma
+ - items:
+ - enum:
+ - loongson,ls1a-apbdma
+ - loongson,ls1c-apbdma
+ - const: loongson,ls1b-apbdma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: NAND interrupt
+ - description: Audio playback interrupt
+ - description: Audio capture interrupt
+
+ interrupt-names:
+ items:
+ - const: ch0
+ - const: ch1
+ - const: ch2
+
+ '#dma-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ dma-controller@1fd01160 {
+ compatible = "loongson,ls1b-apbdma";
+ reg = <0x1fd01160 0x4>;
+ interrupt-parent = <&intc0>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>,
+ <14 IRQ_TYPE_EDGE_RISING>,
+ <15 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ch0", "ch1", "ch2";
+ #dma-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/marvell,xor-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell XOR v2 engines
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+
+properties:
+ compatible:
+ oneOf:
+ - const: marvell,xor-v2
+ - items:
+ - enum:
+ - marvell,armada-7k-xor
+ - const: marvell,xor-v2
+
+ reg:
+ items:
+ - description: DMA registers
+ - description: global registers
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: core
+ - const: reg
+
+ msi-parent:
+ description:
+ Phandle to the MSI-capable interrupt controller used for
+ interrupts.
+ maxItems: 1
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - msi-parent
+ - dma-coherent
+
+additionalProperties: false
+
+examples:
+ - |
+ xor0@6a0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+ clocks = <&ap_clk 0>, <&ap_clk 1>;
+ clock-names = "core", "reg";
+ msi-parent = <&gic_v2m0>;
+ dma-coherent;
+ };
+++ /dev/null
-* Marvell XOR v2 engines
-
-Required properties:
-- compatible: one of the following values:
- "marvell,armada-7k-xor"
- "marvell,xor-v2"
-- reg: Should contain registers location and length (two sets)
- the first set is the DMA registers
- the second set is the global registers
-- msi-parent: Phandle to the MSI-capable interrupt controller used for
- interrupts.
-
-Optional properties:
-- clocks: Optional reference to the clocks used by the XOR engine.
-- clock-names: mandatory if there is a second clock, in this case the
- name must be "core" for the first clock and "reg" for the second
- one
-
-
-Example:
-
- xor0@400000 {
- compatible = "marvell,xor-v2";
- reg = <0x400000 0x1000>,
- <0x410000 0x1000>;
- msi-parent = <&gic_v2m0>;
- dma-coherent;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nxp,lpc3220-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA multiplexer for LPC32XX SoC (DMA request router)
+
+maintainers:
+ - J.M.B. Downing <jonathan.downing@nautel.com>
+ - Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
+
+allOf:
+ - $ref: dma-router.yaml#
+
+properties:
+ compatible:
+ const: nxp,lpc3220-dmamux
+
+ reg:
+ maxItems: 1
+
+ dma-masters:
+ description: phandle to a dma node compatible with arm,pl080
+ maxItems: 1
+
+ "#dma-cells":
+ const: 3
+ description: |
+ First two cells same as for device pointed in dma-masters.
+ Third cell represents mux value for the request.
+
+required:
+ - compatible
+ - reg
+ - dma-masters
+
+additionalProperties: false
+
+examples:
+ - |
+ dma-router@7c {
+ compatible = "nxp,lpc3220-dmamux";
+ reg = <0x7c 0x8>;
+ dma-masters = <&dma>;
+ #dma-cells = <3>;
+ };
+
+...
- renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five
- renesas,r9a07g044-dmac # RZ/G2{L,LC}
- renesas,r9a07g054-dmac # RZ/V2L
+ - renesas,r9a08g045-dmac # RZ/G3S
- const: renesas,rz-dmac
reg:
memcpy channels in eDMA.
Notes:
-When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request
+When requesting channel via ti,dra7-dma-crossbar, the DMA client must request
the DMA event number as crossbar ID (input to the DMA crossbar).
For ti,am335x-edma-crossbar: the meaning of parameters of dmas for clients:
const: 1
compatible:
- const: xlnx,zynqmp-dma-1.0
+ enum:
+ - amd,versal2-dma-1.0
+ - xlnx,zynqmp-dma-1.0
reg:
description: memory map for gdma/adma module access
- const: atmel,24c02
- items:
- enum:
+ - giantec,gt24c04a
- onnn,cat24c04
- onnn,cat24c05
- rohm,br24g04
GPIO pin (output) used to control VBUS. If skipped, no such control
takes place.
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node to link the usb controller for the dual role switch.
+
required:
- compatible
- interrupts
interrupt-parent = <&msmgpio>;
interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
};
};
+++ /dev/null
-USB GPIO Extcon device
-
-This is a virtual device used to generate USB cable states from the USB ID pin
-connected to a GPIO pin.
-
-Required properties:
-- compatible: Should be "linux,extcon-usb-gpio"
-
-Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
-- id-gpio: gpio for USB ID pin. See gpio binding.
-- vbus-gpio: gpio for USB VBUS pin.
-
-Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
- extcon_usb1 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
- }
-
- &omap_dwc3_1 {
- extcon = <&extcon_usb1>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/linux,extcon-usb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB GPIO Extcon device
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ This is a virtual device used to generate USB cable states from the USB ID pin
+ connected to a GPIO pin.
+
+properties:
+ compatible:
+ const: linux,extcon-usb-gpio
+
+ id-gpios:
+ description: gpio for USB ID pin. See gpio binding.
+ vbus-gpios:
+ description: gpio for USB VBUS pin.
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+ };
[0] https://developer.arm.com/documentation/den0056/latest
+anyOf:
+ - $ref: /schemas/firmware/nxp,imx95-scmi.yaml
+
properties:
$nodename:
const: scmi
atomic mode of operation, even if requested.
default: 0
+ arm,max-rx-timeout-ms:
+ description:
+ An optional time value, expressed in milliseconds, representing the
+ transport maximum timeout value for the receive channel. The value should
+ be a non-zero value if set.
+ minimum: 1
+
arm,smc-id:
$ref: /schemas/types.yaml#/definitions/uint32
description:
required:
- '#power-domain-cells'
+ protocol@12:
+ $ref: '#/$defs/protocol-node'
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ const: 0x12
+
protocol@13:
$ref: '#/$defs/protocol-node'
unevaluatedProperties: false
required:
- reg
-additionalProperties: false
+unevaluatedProperties: false
$defs:
protocol-node:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2024 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/nxp,imx95-scmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX95 System Control and Management Interface(SCMI) Vendor Protocols Extension
+
+maintainers:
+ - Peng Fan <peng.fan@nxp.com>
+
+properties:
+ protocol@81:
+ $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ const: 0x81
+
+ protocol@84:
+ $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ const: 0x84
+
+ nxp,ctrl-ids:
+ description:
+ Each entry consists of 2 integers, represents the ctrl id and the value
+ items:
+ items:
+ - description: the ctrl id index
+ enum: [0, 1, 2, 3, 4, 5, 6, 7, 0x8000, 0x8001, 0x8002, 0x8003,
+ 0x8004, 0x8005, 0x8006, 0x8007]
+ - description: the value assigned to the ctrl id
+ minItems: 1
+ maxItems: 16
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+
+additionalProperties: true
allOf:
- $ref: gnss-common.yaml#
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
properties:
compatible:
GPIO line, this is used.
maxItems: 1
- current-speed:
- description: The baudrate in bits per second of the device as it comes
- online, current active speed.
- $ref: /schemas/types.yaml#/definitions/uint32
-
additionalProperties: true
examples:
allOf:
- $ref: gnss-common.yaml#
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
properties:
compatible:
allOf:
- $ref: gnss-common.yaml#
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
properties:
compatible:
allOf:
- $ref: gnss-common.yaml#
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
maintainers:
- Johan Hovold <johan@kernel.org>
patternProperties:
"^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
type: object
-
- properties:
- gpio-hog: true
- gpios: true
- output-high: true
- output-low: true
- line-name: true
-
required:
- gpio-hog
- - gpios
-
- additionalProperties: false
required:
- compatible
patternProperties:
"^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+ type: object
required:
- gpio-hog
patternProperties:
"^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
type: object
- properties:
- gpio-hog: true
- gpios: true
- input: true
- output-high: true
- output-low: true
- line-name: true
-
required:
- gpio-hog
- - gpios
-
- additionalProperties: false
required:
- compatible
gpio-ranges: true
+ gpio-reserved-ranges: true
+
gpio-line-names:
description: strings describing the names of each gpio line.
minItems: 1
reg-names = "data", "dir", "intr";
gpio-controller;
#gpio-cells = <2>;
- interrupt-controller;
- interrupt-parent = <&vic1>;
- interrupts = <27>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
};
gpio@80840004 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupt-parent = <&vic1>;
interrupts = <27>;
};
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts-extended = <&vic0 19>, <&vic0 20>,
<&vic0 21>, <&vic0 22>,
<&vic1 15>, <&vic1 16>,
patternProperties:
"^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
type: object
- properties:
- gpio-hog: true
- gpios: true
- input: true
- output-high: true
- output-low: true
- line-name: true
-
required:
- gpio-hog
- - gpios
-
- additionalProperties: false
required:
- compatible
+++ /dev/null
-NXP LPC32xx SoC GPIO controller
-
-Required properties:
-- compatible: must be "nxp,lpc3220-gpio"
-- reg: Physical base address and length of the controller's registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be 3:
- 1) bank:
- 0: GPIO P0
- 1: GPIO P1
- 2: GPIO P2
- 3: GPIO P3
- 4: GPI P3
- 5: GPO P3
- 2) pin number
- 3) optional parameters:
- - bit 0 specifies polarity (0 for normal, 1 for inverted)
-- reg: Index of the GPIO group
-
-Example:
-
- gpio: gpio@40028000 {
- compatible = "nxp,lpc3220-gpio";
- reg = <0x40028000 0x1000>;
- gpio-controller;
- #gpio-cells = <3>; /* bank, pin, flags */
- };
-
- leds {
- compatible = "gpio-leds";
-
- led0 {
- gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
-
- led1 {
- gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */
- linux,default-trigger = "timer";
- default-state = "off";
- };
- };
patternProperties:
"^.+-hog(-[0-9]+)?$":
type: object
-
- additionalProperties: false
-
- properties:
- gpio-hog: true
- gpios: true
- input: true
- output-high: true
- output-low: true
- line-name: true
-
required:
- gpio-hog
- - gpios
allOf:
- if:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nxp,lpc3220-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC3220 SoC GPIO controller
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+ compatible:
+ const: nxp,lpc3220-gpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 3
+ description: |
+ 1) bank:
+ 0: GPIO P0
+ 1: GPIO P1
+ 2: GPIO P2
+ 3: GPIO P3
+ 4: GPI P3
+ 5: GPO P3
+ 2) pin number
+ 3) flags:
+ - bit 0 specifies polarity (0 for normal, 1 for inverted)
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@40028000 {
+ compatible = "nxp,lpc3220-gpio";
+ reg = <0x40028000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <3>; /* bank, pin, flags */
+ };
patternProperties:
"^.+-hog(-[0-9]+)?$":
type: object
- properties:
- gpio-hog: true
- gpios: true
- input: true
- output-high: true
- output-low: true
- line-name: true
-
required:
- gpio-hog
- - gpios
-
- additionalProperties: false
required:
- compatible
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/sprd,hwspinlock-r3p0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum hardware spinlock
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+ compatible:
+ const: sprd,hwspinlock-r3p0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: enable
+
+ '#hwlock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#hwlock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sprd,sc9860-clk.h>
+
+ hwlock@40500000 {
+ compatible = "sprd,hwspinlock-r3p0";
+ reg = <0x40500000 0x1000>;
+ clocks = <&aon_gate CLK_SPLK_EB>;
+ clock-names = "enable";
+ #hwlock-cells = <1>;
+ };
+...
+++ /dev/null
-SPRD Hardware Spinlock Device Binding
--------------------------------------
-
-Required properties :
-- compatible : should be "sprd,hwspinlock-r3p0".
-- reg : the register address of hwspinlock.
-- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
- hwlock, so the number of cells should be <1> here.
-- clock-names : Must contain "enable".
-- clocks : Must contain a phandle entry for the clock in clock-names, see the
- common clock bindings.
-
-Please look at the generic hwlock binding for usage information for consumers,
-"Documentation/devicetree/bindings/hwlock/hwlock.txt"
-
-Example of hwlock provider:
- hwspinlock@40500000 {
- compatible = "sprd,hwspinlock-r3p0";
- reg = <0 0x40500000 0 0x1000>;
- #hwlock-cells = <1>;
- clock-names = "enable";
- clocks = <&clk_aon_apb_gates0 22>;
- };
the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
uses a logic high output for 100% duty cycle.
$ref: /schemas/types.yaml#/definitions/uint32-array
+ deprecated: true
minItems: 3
maxItems: 3
items:
enum: [0, 1]
default: 1
+ "#pwm-cells":
+ const: 4
+ description: |
+ Number of cells in a PWM specifier.
+ - 0: The PWM channel
+ - 1: The PWM period in nanoseconds
+ - 90909091 (11 Hz)
+ - 71428571 (14 Hz)
+ - 45454545 (22 Hz)
+ - 34482759 (29 Hz)
+ - 28571429 (35 Hz)
+ - 22727273 (44 Hz)
+ - 17241379 (58 Hz)
+ - 11363636 (88 Hz)
+ - 44444 (22 kHz)
+ - 2: PWM flags 0 or PWM_POLARITY_INVERTED
+ - 3: The default PWM duty cycle in nanoseconds
+
patternProperties:
"^adi,bypass-attenuator-in[0-4]$":
description: |
- smbalert#
- gpio
+ "^fan-[0-9]+$":
+ $ref: fan-common.yaml#
+ unevaluatedProperties: false
+
required:
- compatible
- reg
examples:
- |
+ #include <dt-bindings/pwm/pwm.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
- hwmon@2e {
+ pwm: hwmon@2e {
compatible = "adi,adt7476";
reg = <0x2e>;
adi,bypass-attenuator-in0 = <1>;
adi,bypass-attenuator-in1 = <0>;
- adi,pwm-active-state = <1 0 1>;
adi,pin10-function = "smbalert#";
adi,pin14-function = "tach4";
+ #pwm-cells = <4>;
+
+ /* PWMs at 22.5 kHz frequency, 50% duty*/
+ fan-0 {
+ pwms = <&pwm 0 44444 0 22222>;
+ };
+
+ fan-1 {
+ pwms = <&pwm 2 44444 0 22222>;
+ };
};
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc2978.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Octal Digital Power-supply monitor/supervisor/sequencer/margin controller.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc2972
+ - lltc,ltc2974
+ - lltc,ltc2975
+ - lltc,ltc2977
+ - lltc,ltc2978
+ - lltc,ltc2979
+ - lltc,ltc2980
+ - lltc,ltc3880
+ - lltc,ltc3882
+ - lltc,ltc3883
+ - lltc,ltc3884
+ - lltc,ltc3886
+ - lltc,ltc3887
+ - lltc,ltc3889
+ - lltc,ltc7880
+ - lltc,ltm2987
+ - lltc,ltm4664
+ - lltc,ltm4675
+ - lltc,ltm4676
+ - lltc,ltm4677
+ - lltc,ltm4678
+ - lltc,ltm4680
+ - lltc,ltm4686
+ - lltc,ltm4700
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+ description: |
+ list of regulators provided by this controller.
+ Valid names of regulators depend on number of supplies supported per device:
+ * ltc2972 vout0 - vout1
+ * ltc2974, ltc2975 : vout0 - vout3
+ * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
+ * ltc2978 : vout0 - vout7
+ * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
+ * ltc7880 : vout0 - vout1
+ * ltc3883 : vout0
+ * ltm4664 : vout0 - vout1
+ * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
+ * ltm4680, ltm4686 : vout0 - vout1
+ * ltm4700 : vout0 - vout1
+
+ patternProperties:
+ "^vout[0-7]$":
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@5e {
+ compatible = "lltc,ltc2978";
+ reg = <0x5e>;
+
+ regulators {
+ vout0 {
+ regulator-name = "FPGA-2.5V";
+ };
+ vout2 {
+ regulator-name = "FPGA-1.5V";
+ };
+ };
+ };
+ };
+
+++ /dev/null
-ltc2978
-
-Required properties:
-- compatible: should contain one of:
- * "lltc,ltc2972"
- * "lltc,ltc2974"
- * "lltc,ltc2975"
- * "lltc,ltc2977"
- * "lltc,ltc2978"
- * "lltc,ltc2979"
- * "lltc,ltc2980"
- * "lltc,ltc3880"
- * "lltc,ltc3882"
- * "lltc,ltc3883"
- * "lltc,ltc3884"
- * "lltc,ltc3886"
- * "lltc,ltc3887"
- * "lltc,ltc3889"
- * "lltc,ltc7880"
- * "lltc,ltm2987"
- * "lltc,ltm4664"
- * "lltc,ltm4675"
- * "lltc,ltm4676"
- * "lltc,ltm4677"
- * "lltc,ltm4678"
- * "lltc,ltm4680"
- * "lltc,ltm4686"
- * "lltc,ltm4700"
-- reg: I2C slave address
-
-Optional properties:
-- regulators: A node that houses a sub-node for each regulator controlled by
- the device. Each sub-node is identified using the node's name, with valid
- values listed below. The content of each sub-node is defined by the
- standard binding for regulators; see regulator.txt.
-
-Valid names of regulators depend on number of supplies supported per device:
- * ltc2972 vout0 - vout1
- * ltc2974, ltc2975 : vout0 - vout3
- * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
- * ltc2978 : vout0 - vout7
- * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
- * ltc7880 : vout0 - vout1
- * ltc3883 : vout0
- * ltm4664 : vout0 - vout1
- * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
- * ltm4680, ltm4686 : vout0 - vout1
- * ltm4700 : vout0 - vout1
-
-Example:
-ltc2978@5e {
- compatible = "lltc,ltc2978";
- reg = <0x5e>;
- regulators {
- vout0 {
- regulator-name = "FPGA-2.5V";
- };
- vout2 {
- regulator-name = "FPGA-1.5V";
- };
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Maxim MAX31790 Fan Controller
+
+maintainers:
+ - Guenter Roeck <linux@roeck-us.net>
+ - Chanh Nguyen <chanh@os.amperecomputing.com>
+
+description: >
+ The MAX31790 controls the speeds of up to six fans using six
+ independent PWM outputs. The desired fan speeds (or PWM duty cycles)
+ are written through the I2C interface.
+
+ Datasheets:
+ https://datasheets.maximintegrated.com/en/ds/MAX31790.pdf
+
+properties:
+ compatible:
+ const: maxim,max31790
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 1
+
+patternProperties:
+ "^fan-[0-9]+$":
+ $ref: fan-common.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwm_provider: fan-controller@20 {
+ compatible = "maxim,max31790";
+ reg = <0x20>;
+ clocks = <&sys_clk>;
+ resets = <&reset 0>;
+ #pwm-cells = <1>;
+
+ fan-0 {
+ pwms = <&pwm_provider 1>;
+ };
+
+ fan-1 {
+ pwms = <&pwm_provider 2>;
+ };
+ };
+ };
+
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sophgo,sg2042-hwmon-mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 onboard MCU support
+
+maintainers:
+ - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+ compatible:
+ const: sophgo,sg2042-hwmon-mcu
+
+ reg:
+ maxItems: 1
+
+ "#thermal-sensor-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - "#thermal-sensor-cells"
+
+allOf:
+ - $ref: /schemas/thermal/thermal-sensor.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@17 {
+ compatible = "sophgo,sg2042-hwmon-mcu";
+ reg = <0x17>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
description: frequency of the bus clock in Hz defaults to 100 kHz when not
specified
- multi-master:
- type: boolean
- description:
- states that there is another master active on this bus
-
required:
- reg
- compatible
- rockchip,rk3308-i2c
- rockchip,rk3328-i2c
- rockchip,rk3568-i2c
+ - rockchip,rk3576-i2c
- rockchip,rk3588-i2c
- rockchip,rv1126-i2c
- const: rockchip,rk3399-i2c
+++ /dev/null
-I2C for Spreadtrum platforms
-
-Required properties:
-- compatible: Should be "sprd,sc9860-i2c".
-- reg: Specify the physical base address of the controller and length
- of memory mapped region.
-- interrupts: Should contain I2C interrupt.
-- clock-names: Should contain following entries:
- "i2c" for I2C clock,
- "source" for I2C source (parent) clock,
- "enable" for I2C module enable clock.
-- clocks: Should contain a clock specifier for each entry in clock-names.
-- clock-frequency: Contains desired I2C bus clock frequency in Hz.
-- #address-cells: Should be 1 to describe address cells for I2C device address.
-- #size-cells: Should be 0 means no size cell for I2C device address.
-
-Optional properties:
-- Child nodes conforming to I2C bus binding
-
-Examples:
-i2c0: i2c@70500000 {
- compatible = "sprd,sc9860-i2c";
- reg = <0 0x70500000 0 0x1000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c", "source", "enable";
- clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
-};
-
items:
- const: i2c
+ power-domains:
+ maxItems: 1
+
dmas:
items:
- description: DMA channel for the reception FIFO
- nvidia,tegra30-i2c
then:
properties:
+ clocks:
+ minItems: 2
clock-names:
items:
- const: div-clk
properties:
compatible:
contains:
- const: nvidia,tegra114-i2c
- then:
- properties:
- clock-names:
- items:
- - const: div-clk
-
- - if:
- properties:
- compatible:
- contains:
- const: nvidia,tegra210-i2c
+ enum:
+ - nvidia,tegra114-i2c
+ - nvidia,tegra210-i2c
then:
properties:
+ clocks:
+ maxItems: 1
clock-names:
items:
- const: div-clk
const: nvidia,tegra210-i2c-vi
then:
properties:
+ clocks:
+ minItems: 2
clock-names:
items:
- const: div-clk
power-domains:
items:
- description: phandle to the VENC power domain
+ else:
+ properties:
+ power-domains: false
unevaluatedProperties: false
then:
properties:
clocks:
+ minItems: 4
maxItems: 4
clock-names:
items:
- renesas,riic-r9a07g054 # RZ/V2L
- const: renesas,riic-rz # RZ/A or RZ/G2L
+ - items:
+ - const: renesas,riic-r9a08g045 # RZ/G3S
+ - const: renesas,riic-r9a09g057 # RZ/V2H(P)
+
- const: renesas,riic-r9a09g057 # RZ/V2H(P)
reg:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/sprd,sc9860-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC9860 I2C controller
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: sprd,sc9860-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: I2C clock
+ - description: I2C source (parent) clock
+ - description: I2C module enable clock
+
+ clock-names:
+ items:
+ - const: i2c
+ - const: source
+ - const: enable
+
+ clock-frequency: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c@70500000 {
+ compatible = "sprd,sc9860-i2c";
+ reg = <0x70500000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
+ clock-names = "i2c", "source", "enable";
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/tsd,mule-i2c-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Theobroma Systems Mule I2C multiplexer
+
+maintainers:
+ - Farouk Bouabid <farouk.bouabid@cherry.de>
+ - Quentin Schulz <quentin.schulz@cherry.de>
+
+description: |
+ Theobroma Systems Mule is an MCU that emulates a set of I2C devices, among
+ which devices that are reachable through an I2C-mux. The devices on the mux
+ can be selected by writing the appropriate device number to an I2C config
+ register.
+
+
+ +--------------------------------------------------+
+ | Mule |
+ 0x18| +---------------+ |
+ -------->|Config register|----+ |
+ | +---------------+ | |
+ | V_ |
+ | | \ +--------+ |
+ | | \-------->| dev #0 | |
+ | | | +--------+ |
+ 0x6f| | M |-------->| dev #1 | |
+ ---------------------------->| U | +--------+ |
+ | | X |-------->| dev #2 | |
+ | | | +--------+ |
+ | | /-------->| dev #3 | |
+ | |__/ +--------+ |
+ +--------------------------------------------------+
+
+
+allOf:
+ - $ref: /schemas/i2c/i2c-mux.yaml#
+
+properties:
+ compatible:
+ const: tsd,mule-i2c-mux
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c-mux {
+ compatible = "tsd,mule-i2c-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@6f {
+ compatible = "isil,isl1208";
+ reg = <0x6f>;
+ };
+ };
+ };
+...
+
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL380/382 3-Axis Digital Accelerometer
+
+maintainers:
+ - Ramona Gradinariu <ramona.gradinariu@analog.com>
+ - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+ The ADXL380/ADXL382 is a low noise density, low power, 3-axis
+ accelerometer with selectable measurement ranges. The ADXL380
+ supports the ±4 g, ±8 g, and ±16 g ranges, and the ADXL382 supports
+ ±15 g, ±30 g, and ±60 g ranges.
+
+ https://www.analog.com/en/products/adxl380.html
+
+properties:
+ compatible:
+ enum:
+ - adi,adxl380
+ - adi,adxl382
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - enum: [INT0, INT1]
+ - const: INT1
+
+ vddio-supply: true
+
+ vsupply-supply: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - vddio-supply
+ - vsupply-supply
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ accelerometer@54 {
+ compatible = "adi,adxl380";
+ reg = <0x54>;
+ vddio-supply = <&vddio>;
+ vsupply-supply = <&vsupply>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "INT0";
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ accelerometer@0 {
+ compatible = "adi,adxl380";
+ reg = <0>;
+ spi-max-frequency = <8000000>;
+ vddio-supply = <&vddio>;
+ vsupply-supply = <&vsupply>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "INT0";
+ };
+ };
- kionix,kxcj91008
- kionix,kxtj21009
- kionix,kxtf9
+ - kionix,kx022-1020
- kionix,kx023-1025
reg:
- st,irq{1,2}-disable: disable IRQ 1/2
- st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition
- st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition
- - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition
+ - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready condition
- st,irq{1,2}-click: raise IRQ 1/2 on click condition
- st,irq-open-drain: consider IRQ lines open-drain
- st,irq-active-low: make IRQ lines active low
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4000 and similar Analog to Digital Converters
+
+maintainers:
+ - Marcelo Schmitt <marcelo.schmitt@analog.com>
+
+description: |
+ Analog Devices AD4000 family of Analog to Digital Converters with SPI support.
+ Specifications can be found at:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: adi,ad4000
+ - items:
+ - enum:
+ - adi,ad4004
+ - adi,ad4008
+ - const: adi,ad4000
+
+ - const: adi,ad4001
+ - items:
+ - enum:
+ - adi,ad4005
+ - const: adi,ad4001
+
+ - const: adi,ad4002
+ - items:
+ - enum:
+ - adi,ad4006
+ - adi,ad4010
+ - const: adi,ad4002
+
+ - const: adi,ad4003
+ - items:
+ - enum:
+ - adi,ad4007
+ - adi,ad4011
+ - const: adi,ad4003
+
+ - const: adi,ad4020
+ - items:
+ - enum:
+ - adi,ad4021
+ - adi,ad4022
+ - const: adi,ad4020
+
+ - const: adi,adaq4001
+
+ - const: adi,adaq4003
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 102040816 # for VIO > 2.7 V, 81300813 for VIO > 1.7 V
+
+ adi,sdi-pin:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ high, low, cs, sdi ]
+ default: sdi
+ description:
+ Describes how the ADC SDI pin is wired. A value of "sdi" indicates that
+ the ADC SDI is connected to host SDO. "high" indicates that the ADC SDI
+ pin is hard-wired to logic high (VIO). "low" indicates that it is
+ hard-wired low (GND). "cs" indicates that the ADC SDI pin is connected to
+ the host CS line.
+
+ '#daisy-chained-devices': true
+
+ vdd-supply:
+ description: A 1.8V supply that powers the chip (VDD).
+
+ vio-supply:
+ description:
+ A 1.8V to 5.5V supply for the digital inputs and outputs (VIO).
+
+ ref-supply:
+ description:
+ A 2.5 to 5V supply for the external reference voltage (REF).
+
+ cnv-gpios:
+ description:
+ When provided, this property indicates the GPIO that is connected to the
+ CNV pin.
+ maxItems: 1
+
+ adi,high-z-input:
+ type: boolean
+ description:
+ High-Z mode allows the amplifier and RC filter in front of the ADC to be
+ chosen based on the signal bandwidth of interest, rather than the settling
+ requirements of the switched capacitor SAR ADC inputs.
+
+ adi,gain-milli:
+ description: |
+ The hardware gain applied to the ADC input (in milli units).
+ The gain provided by the ADC input scaler is defined by the hardware
+ connections between chip pins OUT+, R1K-, R1K1-, R1K+, R1K1+, and OUT-.
+ If not present, default to 1000 (no actual gain applied).
+ $ref: /schemas/types.yaml#/definitions/uint16
+ enum: [454, 909, 1000, 1900]
+ default: 1000
+
+ interrupts:
+ description:
+ The SDO pin can also function as a busy indicator. This node should be
+ connected to an interrupt that is triggered when the SDO line goes low
+ while the SDI line is high and the CNV line is low ("3-wire" mode) or the
+ SDI line is low and the CNV line is high ("4-wire" mode); or when the SDO
+ line goes high while the SDI and CNV lines are high (chain mode),
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vio-supply
+ - ref-supply
+
+allOf:
+ # The configuration register can only be accessed if SDI is connected to MOSI
+ - if:
+ required:
+ - adi,sdi-pin
+ then:
+ properties:
+ adi,high-z-input: false
+ # chain mode has lower SCLK max rate
+ - if:
+ required:
+ - '#daisy-chained-devices'
+ then:
+ properties:
+ spi-max-frequency:
+ maximum: 50000000 # for VIO > 2.7 V, 40000000 for VIO > 1.7 V
+ # Gain property only applies to ADAQ devices
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ enum:
+ - adi,adaq4001
+ - adi,adaq4003
+ then:
+ properties:
+ adi,gain-milli: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ adc@0 {
+ compatible = "adi,ad4020";
+ reg = <0>;
+ spi-max-frequency = <71000000>;
+ vdd-supply = <&supply_1_8V>;
+ vio-supply = <&supply_1_8V>;
+ ref-supply = <&supply_5V>;
+ adi,sdi-pin = "cs";
+ cnv-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH>;
+ };
+ };
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ adc@0 {
+ compatible = "adi,adaq4003";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ vdd-supply = <&supply_1_8V>;
+ vio-supply = <&supply_1_8V>;
+ ref-supply = <&supply_5V>;
+ adi,high-z-input;
+ adi,gain-milli = /bits/ 16 <454>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4695.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Easy Drive Multiplexed SAR Analog to Digital Converters
+
+maintainers:
+ - Michael Hennerich <Michael.Hennerich@analog.com>
+ - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+ A family of similar multi-channel analog to digital converters with SPI bus.
+
+ * https://www.analog.com/en/products/ad4695.html
+ * https://www.analog.com/en/products/ad4696.html
+ * https://www.analog.com/en/products/ad4697.html
+ * https://www.analog.com/en/products/ad4698.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,ad4695
+ - adi,ad4696
+ - adi,ad4697
+ - adi,ad4698
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 80000000
+
+ spi-cpol: true
+ spi-cpha: true
+
+ spi-rx-bus-width:
+ minimum: 1
+ maximum: 4
+
+ avdd-supply:
+ description: Analog power supply.
+
+ vio-supply:
+ description: I/O pin power supply.
+
+ ldo-in-supply:
+ description: Internal LDO Input. Mutually exclusive with vdd-supply.
+
+ vdd-supply:
+ description: Core power supply. Mutually exclusive with ldo-in-supply.
+
+ ref-supply:
+ description:
+ External reference voltage. Mutually exclusive with refin-supply.
+
+ refin-supply:
+ description:
+ Internal reference buffer input. Mutually exclusive with ref-supply.
+
+ com-supply:
+ description: Common voltage supply for pseudo-differential analog inputs.
+
+ adi,no-ref-current-limit:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When this flag is present, the REF Overvoltage Reduced Current protection
+ is disabled.
+
+ adi,no-ref-high-z:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable this flag if the ref-supply requires Reference Input High-Z Mode
+ to be disabled for proper operation.
+
+ cnv-gpios:
+ description: The Convert Input (CNV). If omitted, CNV is tied to SPI CS.
+ maxItems: 1
+
+ reset-gpios:
+ description: The Reset Input (RESET). Should be configured GPIO_ACTIVE_LOW.
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: Signal coming from the BSY_ALT_GP0 pin (ALERT or BUSY).
+ - description: Signal coming from the GP2 pin (ALERT).
+ - description: Signal coming from the GP3 pin (BUSY).
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: gp0
+ - const: gp2
+ - const: gp3
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ The first cell is the GPn number: 0 to 3.
+ The second cell takes standard GPIO flags.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^in(?:[13579]|1[135])-supply$":
+ description:
+ Optional voltage supply for odd numbered channels when they are used as
+ the negative input for a pseudo-differential channel.
+
+ "^channel@[0-9a-f]$":
+ type: object
+ $ref: adc.yaml
+ unevaluatedProperties: false
+ description:
+ Describes each individual channel. In addition the properties defined
+ below, bipolar from adc.yaml is also supported.
+
+ properties:
+ reg:
+ maximum: 15
+
+ common-mode-channel:
+ description:
+ Describes the common mode channel for single channels. 0xFF is REFGND
+ and OxFE is COM. Macros are available for these values in
+ dt-bindings/iio/adi,ad4695.h. Values 1 to 15 correspond to INx inputs.
+ Only odd numbered INx inputs can be used as common mode channels.
+ enum: [1, 3, 5, 7, 9, 11, 13, 15, 0xFE, 0xFF]
+ default: 0xFF
+
+ adi,no-high-z:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable this flag if the input pin requires the Analog Input High-Z
+ Mode to be disabled for proper operation.
+
+ required:
+ - reg
+
+ allOf:
+ # bipolar mode can't be used with REFGND
+ - if:
+ properties:
+ common-mode-channel:
+ const: 0xFF
+ then:
+ properties:
+ bipolar: false
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - vio-supply
+
+allOf:
+ - oneOf:
+ - required:
+ - ldo-in-supply
+ - required:
+ - vdd-supply
+
+ - oneOf:
+ - required:
+ - ref-supply
+ - required:
+ - refin-supply
+
+ # the internal reference buffer always requires high-z mode
+ - if:
+ required:
+ - refin-supply
+ then:
+ properties:
+ adi,no-ref-high-z: false
+
+ # limit channels for 8-channel chips
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad4697
+ - adi,ad4698
+ then:
+ patternProperties:
+ "^in(?:9|1[135])-supply$": false
+ "^channel@[0-7]$":
+ properties:
+ reg:
+ maximum: 7
+ common-mode-channel:
+ enum: [1, 3, 5, 7, 0xFE, 0xFF]
+ "^channel@[8-9a-f]$": false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/iio/adi,ad4695.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad4695";
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+ spi-max-frequency = <80000000>;
+ avdd-supply = <&power_supply>;
+ ldo-in-supply = <&power_supply>;
+ vio-supply = <&io_supply>;
+ refin-supply = <&supply_5V>;
+ com-supply = <&supply_2V5>;
+ in3-supply = <&supply_2V5>;
+ reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Pseudo-differential channel between IN0 and REFGND. */
+ channel@0 {
+ reg = <0>;
+ };
+
+ /* Pseudo-differential channel between IN1 and COM. */
+ channel@1 {
+ reg = <1>;
+ common-mode-channel = <AD4695_COMMON_MODE_COM>;
+ bipolar;
+ };
+
+ /* Pseudo-differential channel between IN2 and IN3. */
+ channel@2 {
+ reg = <2>;
+ common-mode-channel = <3>;
+ bipolar;
+ };
+ };
+ };
clocks:
maxItems: 1
- description: phandle to the master clock (mclk)
+ description:
+ Optionally, either a crystal can be attached externally between MCLK1 and
+ MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
+ pin. If absent, internal 4.92MHz clock is used, which can be made
+ available on MCLK2 pin.
clock-names:
- items:
- - const: mclk
+ enum:
+ - xtal
+ - mclk
+
+ "#clock-cells":
+ const: 0
+ description:
+ If present when internal clock is used, configured as clock provider.
interrupts:
maxItems: 1
required:
- compatible
- reg
- - clocks
- - clock-names
- interrupts
- dvdd-supply
- avdd-supply
then:
patternProperties:
"^channel@[0-9a-f]+$": false
+ - if:
+ anyOf:
+ - required:
+ - clocks
+ - required:
+ - clock-names
+ then:
+ properties:
+ "#clock-cells": false
+ required:
+ - clocks
+ - clock-names
unevaluatedProperties: false
spi-max-frequency = <1000000>;
spi-cpol;
spi-cpha;
- clocks = <&ad7192_mclk>;
- clock-names = "mclk";
+ #clock-cells = <0>;
interrupts = <25 0x2>;
interrupt-parent = <&gpio>;
aincom-supply = <&aincom>;
* https://www.analog.com/en/products/ad7381.html
* https://www.analog.com/en/products/ad7383.html
* https://www.analog.com/en/products/ad7384.html
+ * https://www.analog.com/en/products/ad7386.html
+ * https://www.analog.com/en/products/ad7387.html
+ * https://www.analog.com/en/products/ad7388.html
* https://www.analog.com/en/products/ad7380-4.html
* https://www.analog.com/en/products/ad7381-4.html
* https://www.analog.com/en/products/ad7383-4.html
* https://www.analog.com/en/products/ad7384-4.html
+ * https://www.analog.com/en/products/ad7386-4.html
+ * https://www.analog.com/en/products/ad7387-4.html
+ * https://www.analog.com/en/products/ad7388-4.html
+
$ref: /schemas/spi/spi-peripheral-props.yaml#
- adi,ad7381
- adi,ad7383
- adi,ad7384
+ - adi,ad7386
+ - adi,ad7387
+ - adi,ad7388
- adi,ad7380-4
- adi,ad7381-4
- adi,ad7383-4
- adi,ad7384-4
+ - adi,ad7386-4
+ - adi,ad7387-4
+ - adi,ad7388-4
reg:
maxItems: 1
A 2.5V to 3.3V supply for the external reference voltage. When omitted,
the internal 2.5V reference is used.
+ refin-supply:
+ description:
+ A 2.5V to 3.3V supply for external reference voltage, for ad7380-4 only.
+
aina-supply:
description:
The common mode voltage supply for the AINA- pin on pseudo-differential
ainc-supply: false
aind-supply: false
+ # ad7380-4 uses refin-supply as external reference.
+ # All other chips from ad738x family use refio as optional external reference.
+ # When refio-supply is omitted, internal reference is used.
+ - if:
+ properties:
+ compatible:
+ enum:
+ - adi,ad7380-4
+ then:
+ properties:
+ refio-supply: false
+ required:
+ - refin-supply
+ else:
+ properties:
+ refin-supply: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
avcc-supply: true
+ vdrive-supply:
+ description:
+ Determines the voltage level at which the interface logic pins will
+ operate.
+
+ refin-supply:
+ description:
+ The voltage supply for optional external reference voltage.
+
interrupts:
+ description:
+ The BUSY pin falling edge indicates that the conversion is over, and thus
+ new data is available.
maxItems: 1
adi,conversion-start-gpios:
description:
- Must be the device tree identifier of the CONVST pin.
- This logic input is used to initiate conversions on the analog
- input channels. As the line is active high, it should be marked
- GPIO_ACTIVE_HIGH.
- maxItems: 1
+ Must be the device tree identifier of the CONVST pin(s). This logic input
+ is used to initiate conversions on the analog input channels. As the line
+ is active high, it should be marked GPIO_ACTIVE_HIGH.
+ minItems: 1
+ maxItems: 2
reset-gpios:
description:
- Must be the device tree identifier of the RESET pin. If specified,
- it will be asserted during driver probe. As the line is active high,
- it should be marked GPIO_ACTIVE_HIGH.
+ Must be the device tree identifier of the RESET pin. If specified, it will
+ be asserted during driver probe. On the AD7606x, as the line is active
+ high, it should be marked GPIO_ACTIVE_HIGH. On the AD7616, as the line is
+ active low, it should be marked GPIO_ACTIVE_LOW.
maxItems: 1
standby-gpios:
description:
- Must be the device tree identifier of the STBY pin. This pin is used
- to place the AD7606 into one of two power-down modes, Standby mode or
+ Must be the device tree identifier of the STBY pin. This pin is used to
+ place the AD7606 into one of two power-down modes, Standby mode or
Shutdown mode. As the line is active low, it should be marked
GPIO_ACTIVE_LOW.
maxItems: 1
adi,first-data-gpios:
description:
- Must be the device tree identifier of the FRSTDATA pin.
- The FRSTDATA output indicates when the first channel, V1, is
- being read back on either the parallel, byte or serial interface.
- As the line is active high, it should be marked GPIO_ACTIVE_HIGH.
+ Must be the device tree identifier of the FRSTDATA pin. The FRSTDATA
+ output indicates when the first channel, V1, is being read back on either
+ the parallel, byte or serial interface. As the line is active high, it
+ should be marked GPIO_ACTIVE_HIGH.
maxItems: 1
adi,range-gpios:
description:
- Must be the device tree identifier of the RANGE pin. The polarity on
- this pin determines the input range of the analog input channels. If
- this pin is tied to a logic high, the analog input range is ±10V for
- all channels. If this pin is tied to a logic low, the analog input range
+ Must be the device tree identifier of the RANGE pin. The state on this
+ pin determines the input range of the analog input channels. If this pin
+ is tied to a logic high, the analog input range is ±10V for all channels.
+ On the AD760X, if this pin is tied to a logic low, the analog input range
is ±5V for all channels. As the line is active high, it should be marked
- GPIO_ACTIVE_HIGH.
- maxItems: 1
+ GPIO_ACTIVE_HIGH. On the AD7616, there are 2 pins, and if the 2 pins are
+ tied to a logic high, software mode is enabled, otherwise one of the 3
+ possible range values is selected.
+ minItems: 1
+ maxItems: 2
adi,oversampling-ratio-gpios:
description:
- Must be the device tree identifier of the over-sampling
- mode pins. As the line is active high, it should be marked
- GPIO_ACTIVE_HIGH.
+ Must be the device tree identifier of the over-sampling mode pins. As the
+ line is active high, it should be marked GPIO_ACTIVE_HIGH. On the AD7606X
+ parts that support it, if all 3 pins are tied to a logic high, software
+ mode is enabled.
maxItems: 3
adi,sw-mode:
description:
- Software mode of operation, so far available only for ad7616 and ad7606b.
- It is enabled when all three oversampling mode pins are connected to
- high level. The device is configured by the corresponding registers. If the
- adi,oversampling-ratio-gpios property is defined, then the driver will set the
- oversampling gpios to high. Otherwise, it is assumed that the pins are hardwired
- to VDD.
+ Software mode of operation, so far available only for AD7616 and AD7606B.
+ It is enabled when all three oversampling mode pins are connected to high
+ level for the AD7606B, or both the range selection are connected to high
+ level for the AD7616. The device is configured by the corresponding
+ registers. If the adi,oversampling-ratio-gpios property is defined, then
+ the driver will set the oversampling gpios to high. Otherwise, it is
+ assumed that the pins are hardwired to VDD.
type: boolean
required:
- reg
- spi-cpha
- avcc-supply
+ - vdrive-supply
- interrupts
- adi,conversion-start-gpios
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: adi,ad7616
+ then:
+ properties:
+ adi,first-data-gpios: false
+ standby-gpios: false
+ adi,range-gpios:
+ maxItems: 2
+ else:
+ properties:
+ adi,range-gpios:
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad7605-4
+ - adi,ad7616
+ then:
+ properties:
+ adi,oversampling-ratio-gpios: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad7605-4
+ - adi,ad7606-4
+ - adi,ad7606-6
+ - adi,ad7606-8
+ then:
+ properties:
+ adi,sw-mode: false
+ else:
+ properties:
+ adi,conversion-start-gpios:
+ maxItems: 1
+
unevaluatedProperties: false
examples:
spi-cpha;
avcc-supply = <&adc_vref>;
+ vdrive-supply = <&vdd_supply>;
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpio>;
<&gpio 23 GPIO_ACTIVE_HIGH>,
<&gpio 26 GPIO_ACTIVE_HIGH>;
standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- adi,sw-mode;
};
};
...
- adi,ad9265
- adi,ad9434
- adi,ad9467
+ - adi,ad9643
+ - adi,ad9649
+ - adi,ad9652
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1921.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1921 High-Side Power/Current Monitor with Anaog Output
+
+maintainers:
+ - Matteo Martelli <matteomartelli3@gmail.com>
+
+description: |
+ The PAC1921 is a power/current monitoring device with an analog output
+ and I2C/SMBus interface.
+
+ Datasheet can be found here:
+ https://ww1.microchip.com/downloads/en/DeviceDoc/PAC1921-Data-Sheet-DS20005293E.pdf
+
+properties:
+ compatible:
+ const: microchip,pac1921
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+
+ "#io-channel-cells":
+ const: 1
+
+ shunt-resistor-micro-ohms:
+ description:
+ Value in micro Ohms of the shunt resistor connected between
+ the SENSE+ and SENSE- inputs, across which the current is measured.
+ Value is needed to compute the scaling of the measured current.
+
+ label:
+ description: Unique name to identify which device this is.
+
+ read-integrate-gpios:
+ description:
+ READ/INT input pin to control the current state of the device, either in
+ the INTEGRATE state when driven high, or in the READ state when driven low.
+ When not connected the pin is floating and it can be overridden by the
+ INT_EN register bit after asserting the READ/INT_OVR register bit.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - shunt-resistor-micro-ohms
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@4c {
+ compatible = "microchip,pac1921";
+ reg = <0x4c>;
+ vdd-supply = <&vdd>;
+ #io-channel-cells = <1>;
+ label = "vbat";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+ };
+...
- const: rockchip,rk3066-tsadc
- const: rockchip,rk3399-saradc
- const: rockchip,rk3588-saradc
+ - items:
+ - const: rockchip,rk3576-saradc
+ - const: rockchip,rk3588-saradc
- items:
- enum:
- rockchip,px30-saradc
- sd-modulator
- ads1201
+ '#io-backend-cells':
+ const: 0
+
'#io-channel-cells':
const: 0
+ vref-supply:
+ description: Phandle to the vref input analog reference voltage.
+
+dependencies:
+ vref-supply: [ '#io-backend-cells' ]
+
required:
- compatible
- - '#io-channel-cells'
+
+anyOf:
+ - required: ['#io-backend-cells']
+ - required: ['#io-channel-cells']
additionalProperties: false
examples:
- |
- ads1202: adc {
+ // Backend binding example. SD modulator configured as an IIO backend device
+ ads1201_0: adc {
+ compatible = "sd-modulator";
+ vref-supply = <&vdd_adc>;
+ #io-backend-cells = <0>;
+ };
+
+ - |
+ // Legacy binding example. SD modulator configured as an IIO channel provider
+ ads1201_1: adc {
compatible = "sd-modulator";
#io-channel-cells = <0>;
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/sophgo,cv1800b-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Sophgo CV1800B SoC 3 channels Successive Approximation Analog to
+ Digital Converters
+
+maintainers:
+ - Thomas Bonnefille <thomas.bonnefille@bootlin.com>
+
+description:
+ Datasheet at https://github.com/sophgo/sophgo-doc/releases
+
+properties:
+ compatible:
+ const: sophgo,cv1800b-saradc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^channel@[0-2]$":
+ $ref: adc.yaml
+
+ properties:
+ reg:
+ items:
+ - minimum: 0
+ maximum: 2
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sophgo,cv1800.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ adc@30f0000 {
+ compatible = "sophgo,cv1800b-saradc";
+ reg = <0x030f0000 0x1000>;
+ clocks = <&clk CLK_SARADC>;
+ interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ };
+ };
It's not present on stm32f4.
It's required on stm32h7 and stm32mp1.
- clock-names: true
+ clock-names:
+ minItems: 1
+ maxItems: 2
st,max-clk-rate-hz:
description:
items:
minimum: 0
maximum: 7
+ deprecated: true
st,adc-channel-names:
description: List of single-ended channel names.
+ deprecated: true
st,filter-order:
description: |
"#io-channel-cells":
const: 1
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
st,adc-channel-types:
description: |
Single-ended channel input type.
items:
enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ deprecated: true
st,adc-channel-clk-src:
description: |
items:
enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ deprecated: true
st,adc-alt-channel:
description:
If not set, channel n is connected to SPI input n.
If set, channel n is connected to SPI input n + 1.
type: boolean
+ deprecated: true
st,filter0-sync:
description:
- compatible
- reg
- interrupts
- - st,adc-channels
- - st,adc-channel-names
- st,filter-order
- "#io-channel-cells"
+ patternProperties:
+ "^channel@[0-7]$":
+ type: object
+ $ref: adc.yaml
+ unevaluatedProperties: false
+ description: Represents the external channels which are connected to the DFSDM.
+
+ properties:
+ reg:
+ maximum: 7
+
+ label:
+ description:
+ Unique name to identify which channel this is.
+
+ st,adc-channel-type:
+ description: |
+ Single-ended channel input type.
+ - "SPI_R": SPI with data on rising edge (default)
+ - "SPI_F": SPI with data on falling edge
+ - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
+ - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
+
+ st,adc-channel-clk-src:
+ description: |
+ Conversion clock source.
+ - "CLKIN": external SPI clock (CLKIN x)
+ - "CLKOUT": internal SPI clock (CLKOUT) (default)
+ - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
+ - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
+
+ st,adc-alt-channel:
+ description:
+ Must be defined if two sigma delta modulators are
+ connected on same SPI input.
+ If not set, channel n is connected to SPI input n.
+ If set, channel n is connected to SPI input n + 1.
+ type: boolean
+
+ io-backends:
+ description:
+ Used to pipe external sigma delta modulator or internal ADC backend to DFSDM channel.
+ maxItems: 1
+
+ required:
+ - reg
+
allOf:
- if:
properties:
description:
From common IIO binding. Used to pipe external sigma delta
modulator or internal ADC output to DFSDM channel.
+ deprecated: true
- required:
- - io-channels
+ if:
+ required:
+ - st,adc-channels
+ then:
+ required:
+ - io-channels
+
+ patternProperties:
+ "^channel@[0-7]$":
+ required:
+ - io-backends
- if:
properties:
#address-cells = <1>;
#size-cells = <0>;
+ // Example 1: Audio use case with generic binding
dfsdm0: filter@0 {
compatible = "st,stm32-dfsdm-dmic";
reg = <0>;
dmas = <&dmamux1 101 0x400 0x01>;
dma-names = "rx";
#io-channel-cells = <1>;
- st,adc-channels = <1>;
- st,adc-channel-names = "dmic0";
- st,adc-channel-types = "SPI_R";
- st,adc-channel-clk-src = "CLKOUT";
+ #address-cells = <1>;
+ #size-cells = <0>;
st,filter-order = <5>;
+ channel@1 {
+ reg = <1>;
+ label = "dmic0";
+ st,adc-channel-type = "SPI_R";
+ st,adc-channel-clk-src = "CLKOUT";
+ st,adc-alt-channel;
+ };
+
asoc_pdm0: dfsdm-dai {
compatible = "st,stm32h7-dfsdm-dai";
#sound-dai-cells = <0>;
};
};
- dfsdm_pdm1: filter@1 {
+ // Example 2: Analog use case with generic binding
+ dfsdm1: filter@1 {
compatible = "st,stm32-dfsdm-adc";
reg = <1>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmamux1 102 0x400 0x01>;
dma-names = "rx";
- #io-channel-cells = <1>;
- st,adc-channels = <2 3>;
- st,adc-channel-names = "in2", "in3";
- st,adc-channel-types = "SPI_R", "SPI_R";
- st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F";
- io-channels = <&sd_adc2 &sd_adc3>;
st,filter-order = <1>;
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@2 {
+ reg = <2>;
+ label = "in2";
+ st,adc-channel-type = "SPI_F";
+ st,adc-channel-clk-src = "CLKOUT";
+ st,adc-alt-channel;
+ io-backends = <&sd_adc2>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ label = "in3";
+ st,adc-channel-type = "SPI_R";
+ st,adc-channel-clk-src = "CLKOUT";
+ io-backends = <&sd_adc3>;
+ };
};
};
3 | batt_dischrg_i
4 | ts_v
+ AXP717
+ ------
+ 0 | batt_v
+ 1 | ts_v
+ 2 | vbus_v
+ 3 | vsys_v
+ 4 | pmic_temp
+ 5 | batt_chrg_i
+ 6 | vmid_v
+ 7 | bkup_batt_v
+
AXP813
------
0 | pmic_temp
oneOf:
- const: x-powers,axp209-adc
- const: x-powers,axp221-adc
+ - const: x-powers,axp717-adc
- const: x-powers,axp813-adc
- items:
$id: http://devicetree.org/schemas/iio/dac/adi,ad5686.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Analog Devices AD5360 and similar DACs
+title: Analog Devices AD5360 and similar SPI DACs
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
properties:
compatible:
- oneOf:
- - description: SPI devices
- enum:
- - adi,ad5310r
- - adi,ad5672r
- - adi,ad5674r
- - adi,ad5676
- - adi,ad5676r
- - adi,ad5679r
- - adi,ad5681r
- - adi,ad5682r
- - adi,ad5683
- - adi,ad5683r
- - adi,ad5684
- - adi,ad5684r
- - adi,ad5685r
- - adi,ad5686
- - adi,ad5686r
- - description: I2C devices
- enum:
- - adi,ad5311r
- - adi,ad5337r
- - adi,ad5338r
- - adi,ad5671r
- - adi,ad5675r
- - adi,ad5691r
- - adi,ad5692r
- - adi,ad5693
- - adi,ad5693r
- - adi,ad5694
- - adi,ad5694r
- - adi,ad5695r
- - adi,ad5696
- - adi,ad5696r
-
+ enum:
+ - adi,ad5310r
+ - adi,ad5672r
+ - adi,ad5674r
+ - adi,ad5676
+ - adi,ad5676r
+ - adi,ad5679r
+ - adi,ad5681r
+ - adi,ad5682r
+ - adi,ad5683
+ - adi,ad5683r
+ - adi,ad5684
+ - adi,ad5684r
+ - adi,ad5685r
+ - adi,ad5686
+ - adi,ad5686r
reg:
maxItems: 1
$id: http://devicetree.org/schemas/iio/dac/adi,ad5696.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Analog Devices AD5696 and similar multi-channel DACs
+title: Analog Devices AD5696 and similar I2C multi-channel DACs
maintainers:
- Michael Auchter <michael.auchter@ni.com>
compatible:
enum:
- adi,ad5311r
+ - adi,ad5337r
- adi,ad5338r
- adi,ad5671r
- adi,ad5675r
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2664.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2664 DAC
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@analog.com>
+ - Kim Seer Paller <kimseer.paller@analog.com>
+
+description: |
+ Analog Devices LTC2664 4 channel, 12-/16-Bit, +-10V DAC
+ https://www.analog.com/media/en/technical-documentation/data-sheets/2664fa.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ltc2664
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 50000000
+
+ vcc-supply:
+ description: Analog Supply Voltage Input.
+
+ v-pos-supply:
+ description: Positive Supply Voltage Input.
+
+ v-neg-supply:
+ description: Negative Supply Voltage Input.
+
+ iovcc-supply:
+ description: Digital Input/Output Supply Voltage.
+
+ ref-supply:
+ description:
+ Reference Input/Output. The voltage at the REF pin sets the full-scale
+ range of all channels. If not provided the internal reference is used and
+ also provided on the VREF pin.
+
+ reset-gpios:
+ description:
+ Active-low Asynchronous Clear Input. A logic low at this level-triggered
+ input clears the part to the reset code and range determined by the
+ hardwired option chosen using the MSPAN pins. The control registers are
+ cleared to zero.
+ maxItems: 1
+
+ adi,manual-span-operation-config:
+ description:
+ This property must mimic the MSPAN pin configurations. By tying the MSPAN
+ pins (MSP2, MSP1 and MSP0) to GND and/or VCC, any output range can be
+ hardware-configured with different mid-scale or zero-scale reset options.
+ The hardware configuration is latched during power on reset for proper
+ operation.
+ 0 - MPS2=GND, MPS1=GND, MSP0=GND (+-10V, reset to 0V)
+ 1 - MPS2=GND, MPS1=GND, MSP0=VCC (+-5V, reset to 0V)
+ 2 - MPS2=GND, MPS1=VCC, MSP0=GND (+-2.5V, reset to 0V)
+ 3 - MPS2=GND, MPS1=VCC, MSP0=VCC (0V to 10, reset to 0V)
+ 4 - MPS2=VCC, MPS1=GND, MSP0=GND (0V to 10V, reset to 5V)
+ 5 - MPS2=VCC, MPS1=GND, MSP0=VCC (0V to 5V, reset to 0V)
+ 6 - MPS2=VCC, MPS1=VCC, MSP0=GND (0V to 5V, reset to 2.5V)
+ 7 - MPS2=VCC, MPS1=VCC, MSP0=VCC (0V to 5V, reset to 0V, enables SoftSpan)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 7
+
+ io-channels:
+ description:
+ ADC channel to monitor voltages and temperature at the MUXOUT pin.
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^channel@[0-3]$":
+ $ref: dac.yaml
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ description: The channel number representing the DAC output channel.
+ maximum: 3
+
+ adi,toggle-mode:
+ description:
+ Set the channel as a toggle enabled channel. Toggle operation enables
+ fast switching of a DAC output between two different DAC codes without
+ any SPI transaction.
+ type: boolean
+
+ output-range-microvolt:
+ description:
+ This property is only allowed when SoftSpan is enabled. If not present,
+ [0, 5000000] is the default output range.
+ oneOf:
+ - items:
+ - const: 0
+ - enum: [5000000, 10000000]
+ - items:
+ - const: -5000000
+ - const: 5000000
+ - items:
+ - const: -10000000
+ - const: 10000000
+ - items:
+ - const: -2500000
+ - const: 2500000
+
+ required:
+ - reg
+
+ allOf:
+ - if:
+ not:
+ properties:
+ adi,manual-span-operation-config:
+ const: 7
+ then:
+ patternProperties:
+ "^channel@[0-3]$":
+ properties:
+ output-range-microvolt: false
+
+required:
+ - compatible
+ - reg
+ - spi-max-frequency
+ - vcc-supply
+ - iovcc-supply
+ - v-pos-supply
+ - v-neg-supply
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dac@0 {
+ compatible = "adi,ltc2664";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ vcc-supply = <&vcc>;
+ iovcc-supply = <&vcc>;
+ ref-supply = <&vref>;
+ v-pos-supply = <&vpos>;
+ v-neg-supply = <&vneg>;
+
+ io-channels = <&adc 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@0 {
+ reg = <0>;
+ adi,toggle-mode;
+ output-range-microvolt = <(-10000000) 10000000>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ output-range-microvolt= <0 10000000>;
+ };
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2672.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2672 DAC
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@analog.com>
+ - Kim Seer Paller <kimseer.paller@analog.com>
+
+description: |
+ Analog Devices LTC2672 5 channel, 12-/16-Bit, 300mA DAC
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2672.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ltc2672
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 50000000
+
+ vcc-supply:
+ description: Analog Supply Voltage Input.
+
+ v-neg-supply:
+ description: Negative Supply Voltage Input.
+
+ vdd0-supply:
+ description: Positive Supply Voltage Input for DAC OUT0.
+
+ vdd1-supply:
+ description: Positive Supply Voltage Input for DAC OUT1.
+
+ vdd2-supply:
+ description: Positive Supply Voltage Input for DAC OUT2.
+
+ vdd3-supply:
+ description: Positive Supply Voltage Input for DAC OUT3.
+
+ vdd4-supply:
+ description: Positive Supply Voltage Input for DAC OUT4.
+
+ iovcc-supply:
+ description: Digital Input/Output Supply Voltage.
+
+ ref-supply:
+ description:
+ Reference Input/Output. The voltage at the REF pin sets the full-scale
+ range of all channels. If not provided the internal reference is used and
+ also provided on the VREF pin.
+
+ reset-gpios:
+ description:
+ Active Low Asynchronous Clear Input. A logic low at this level triggered
+ input clears the device to the default reset code and output range, which
+ is zero-scale with the outputs off. The control registers are cleared to
+ zero.
+ maxItems: 1
+
+ adi,rfsadj-ohms:
+ description:
+ If FSADJ is tied to VCC, an internal RFSADJ (20 kΩ) is selected, which
+ results in nominal output ranges. When an external resistor of 19 kΩ to
+ 41 kΩ can be used instead by connecting the resistor between FSADJ and GND
+ it controls the scaling of the ranges, and the internal resistor is
+ automatically disconnected.
+ minimum: 19000
+ maximum: 41000
+ default: 20000
+
+ io-channels:
+ description:
+ ADC channel to monitor voltages and currents at the MUX pin.
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^channel@[0-4]$":
+ $ref: dac.yaml
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ description: The channel number representing the DAC output channel.
+ maximum: 4
+
+ adi,toggle-mode:
+ description:
+ Set the channel as a toggle enabled channel. Toggle operation enables
+ fast switching of a DAC output between two different DAC codes without
+ any SPI transaction.
+ type: boolean
+
+ output-range-microamp:
+ items:
+ - const: 0
+ - enum: [3125000, 6250000, 12500000, 25000000, 50000000, 100000000,
+ 200000000, 300000000]
+
+ required:
+ - reg
+ - output-range-microamp
+
+required:
+ - compatible
+ - reg
+ - spi-max-frequency
+ - vcc-supply
+ - iovcc-supply
+ - v-neg-supply
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dac@0 {
+ compatible = "adi,ltc2672";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ vcc-supply = <&vcc>;
+ iovcc-supply = <&vcc>;
+ ref-supply = <&vref>;
+ v-neg-supply = <&vneg>;
+
+ io-channels = <&adc 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@0 {
+ reg = <0>;
+ adi,toggle-mode;
+ output-range-microamp = <0 3125000>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ output-range-microamp = <0 6250000>;
+ };
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IIO Common Properties for DAC Channels
+
+maintainers:
+ - Jonathan Cameron <jic23@kernel.org>
+
+description:
+ A few properties are defined in a common way for DAC channels.
+
+properties:
+ $nodename:
+ pattern: "^channel(@[0-9a-f]+)?$"
+ description:
+ A channel index should match reg.
+
+ reg:
+ maxItems: 1
+
+ label:
+ description: Unique name to identify which channel this is.
+
+ output-range-microamp:
+ maxItems: 2
+ minItems: 2
+ description:
+ Specify the channel output full scale range in microamperes.
+
+ output-range-microvolt:
+ maxItems: 2
+ minItems: 2
+ description:
+ Specify the channel output full scale range in microvolts.
+
+anyOf:
+ - oneOf:
+ - required:
+ - reg
+ - output-range-microamp
+ - required:
+ - reg
+ - output-range-microvolt
+ - required:
+ - reg
+
+additionalProperties: true
applications.
https://www.analog.com/en/products/adf4377.html
+ https://www.analog.com/en/products/adf4378.html
properties:
compatible:
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adf4378
+ then:
+ properties:
+ clk2-enable-gpios: false
unevaluatedProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/sciosense,ens210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ScioSense ENS210 temperature and humidity sensor
+
+maintainers:
+ - Joshua Felmeden <jfelmeden@thegoodpenguin.co.uk>
+
+description: |
+ Temperature and Humidity sensor.
+
+ Datasheet:
+ https://www.sciosense.com/wp-content/uploads/2024/04/ENS21x-Datasheet.pdf
+ https://www.sciosense.com/wp-content/uploads/2023/12/ENS210-Datasheet.pdf
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - sciosense,ens210a
+ - sciosense,ens211
+ - sciosense,ens212
+ - sciosense,ens213a
+ - sciosense,ens215
+ - const: sciosense,ens210
+ - const: sciosense,ens210
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@43 {
+ compatible = "sciosense,ens210";
+ reg = <0x43>;
+ };
+ };
+...
+
properties:
compatible:
- const: liteon,ltrf216a
+ enum:
+ - liteon,ltr308
+ - liteon,ltrf216a
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bh1745.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BH1745 colour sensor
+
+maintainers:
+ - Mudit Sharma <muditsharma.info@gmail.com>
+
+description:
+ BH1745 is an I2C colour sensor with red, green, blue and clear
+ channels. It has a programmable active low interrupt pin.
+ Interrupt occurs when the signal from the selected interrupt
+ source channel crosses set interrupt threshold high/low level.
+
+properties:
+ compatible:
+ const: rohm,bh1745
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ colour-sensor@38 {
+ compatible = "rohm,bh1745";
+ reg = <0x38>;
+ interrupt-parent = <&gpio>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vdd>;
+ };
+ };
+
+...
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/iio/light/rohm,bu27034.yaml#
+$id: http://devicetree.org/schemas/iio/light/rohm,bu27034anuc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: ROHM BU27034 ambient light sensor
+title: ROHM BU27034ANUC ambient light sensor
maintainers:
- Matti Vaittinen <mazziesaccount@gmail.com>
description: |
- ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes
+ ROHM BU27034ANUC is an ambient light sensor with 2 channels and 2 photo diodes
capable of detecting a very wide range of illuminance. Typical application
is adjusting LCD and backlight power of TVs and mobile phones.
- https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf
properties:
compatible:
- const: rohm,bu27034
+ const: rohm,bu27034anuc
reg:
maxItems: 1
#size-cells = <0>;
light-sensor@38 {
- compatible = "rohm,bu27034";
+ compatible = "rohm,bu27034anuc";
reg = <0x38>;
vdd-supply = <&vdd>;
};
properties:
compatible:
- enum:
- - sensortek,stk3310
- - sensortek,stk3311
- - sensortek,stk3335
+ oneOf:
+ - enum:
+ - sensortek,stk3310
+ - sensortek,stk3311
+ - sensortek,stk3335
+ - items:
+ - enum:
+ - sensortek,stk3013
+ - const: sensortek,stk3310
reg:
maxItems: 1
- asahi-kasei,ak09911
- asahi-kasei,ak09912
- asahi-kasei,ak09916
+ - items:
+ # ak09918 is register compatible with ak09912.
+ - const: asahi-kasei,ak09918
+ - const: asahi-kasei,ak09912
- enum:
- ak8975
- ak8963
- ak09911
- ak09912
- - ak09916
deprecated: true
reg:
interrupts:
maxItems: 1
+ mount-matrix:
+ description: an optional 3x3 mounting rotation matrix.
+
additionalProperties: false
required:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/sensirion,sdp500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: sdp500/sdp510 pressure sensor with I2C bus interface
+
+maintainers:
+ - Petar Stoykov <petar.stoykov@prodrive-technologies.com>
+
+description: |
+ Pressure sensor from Sensirion with I2C bus interface.
+ There is no software difference between sdp500 and sdp510.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: sensirion,sdp510
+ - const: sensirion,sdp500
+ - const: sensirion,sdp500
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pressure@40 {
+ compatible = "sensirion,sdp500";
+ reg = <0x40>;
+ vdd-supply = <&foo>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/awinic,aw96103.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic's AW96103 capacitive proximity sensor and similar
+
+maintainers:
+ - Wang Shuaijie <wangshuaijie@awinic.com>
+
+description: |
+ Awinic's AW96103/AW96105 proximity sensor.
+ The specific absorption rate (SAR) is a metric that measures
+ the degree of absorption of electromagnetic radiation emitted by
+ wireless devices, such as mobile phones and tablets, by human tissue.
+ In mobile phone applications, the proximity sensor is primarily
+ used to detect the proximity of the human body to the phone. When the
+ phone approaches the human body, it will actively reduce the transmit
+ power of the antenna to keep the SAR within a safe range. Therefore,
+ we also refer to the proximity sensor as a SAR sensor.
+
+properties:
+ compatible:
+ enum:
+ - awinic,aw96103
+ - awinic,aw96105
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Generated by the device to announce that a close/far
+ proximity event has happened.
+ maxItems: 1
+
+ vcc-supply: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ proximity@12 {
+ compatible = "awinic,aw96103";
+ reg = <0x12>;
+ interrupt-parent = <&gpio>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ vcc-supply = <&pp1800_prox>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TYHX HX9023S capacitive proximity sensor
+
+maintainers:
+ - Yasin Lee <yasin.lee.x@gmail.com>
+
+description: |
+ TYHX HX9023S proximity sensor. Datasheet can be found here:
+ http://www.tianyihexin.com/ueditor/php/upload/file/20240614/1718336303992081.pdf
+
+properties:
+ compatible:
+ const: tyhx,hx9023s
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Generated by device to announce preceding read request has finished
+ and data is available or that a close/far proximity event has happened.
+ maxItems: 1
+
+ vdd-supply: true
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^channel@[0-4]$":
+ $ref: /schemas/iio/adc/adc.yaml
+ type: object
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 4
+ description: The channel number.
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ proximity@2a {
+ compatible = "tyhx,hx9023s";
+ reg = <0x2a>;
+ interrupt-parent = <&pio>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pp1800_prox>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ single-channel = <0>;
+ };
+ channel@1 {
+ reg = <1>;
+ single-channel = <1>;
+ };
+ channel@2 {
+ reg = <2>;
+ single-channel = <2>;
+ };
+ channel@3 {
+ reg = <3>;
+ diff-channels = <1 0>;
+ };
+ channel@4 {
+ reg = <4>;
+ diff-channels = <2 0>;
+ };
+ };
+ };
- description: Legacy compatibles used on Macintosh devices
enum:
+ - AAPL,3500
+ - AAPL,7500
+ - AAPL,8500
+ - AAPL,9500
+ - AAPL,accelerometer_1
+ - AAPL,e411
+ - AAPL,Gossamer
+ - AAPL,PowerBook1998
+ - AAPL,ShinerESB
- adm1030
+ - amd-0137
+ - B5221
- bmac+
+ - burgundy
+ - cobalt
+ - cy28508
+ - daca
+ - fcu
+ - gatwick
+ - gmac
+ - heathrow
+ - heathrow-ata
- heathrow-media-bay
+ - i2sbus
+ - i2s-modem
+ - iMac
+ - K2-GMAC
+ - k2-i2c
+ - K2-Keylargo
+ - K2-UATA
+ - kauai-ata
+ - Keylargo
+ - keylargo-ata
- keylargo-media-bay
- lm87cimt
- MAC,adm1030
- MAC,ds1775
+ - MacRISC
+ - MacRISC2
+ - MacRISC3
+ - MacRISC4
- max6690
+ - ohare
- ohare-media-bay
- ohare-swim3
+ - PowerBook1,1
+ - PowerBook2,1
+ - PowerBook2,2
+ - PowerBook3,1
+ - PowerBook3,2
+ - PowerBook3,3
+ - PowerBook3,4
+ - PowerBook3,5
+ - PowerBook4,1
+ - PowerBook4,2
+ - PowerBook4,3
+ - PowerBook5,1
+ - PowerBook5,2
+ - PowerBook5,3
+ - PowerBook5,4
+ - PowerBook5,5
+ - PowerBook5,6
+ - PowerBook5,7
+ - PowerBook5,8
+ - PowerBook5,9
+ - PowerBook6,3
+ - PowerBook6,5
+ - PowerBook6,7
+ - PowerMac10,1
+ - PowerMac10,2
+ - PowerMac1,1
+ - PowerMac11,2
+ - PowerMac12,1
+ - PowerMac2,1
+ - PowerMac2,2
+ - PowerMac3,1
+ - PowerMac3,4
+ - PowerMac3,5
+ - PowerMac3,6
+ - PowerMac4,1
+ - PowerMac4,2
+ - PowerMac4,4
+ - PowerMac4,5
+ - PowerMac7,2
+ - PowerMac7,3
+ - PowerMac8,1
+ - PowerMac8,2
+ - PowerMac9,1
+ - paddington
+ - RackMac1,1
+ - RackMac1,2
+ - RackMac3,1
+ - screamer
+ - shasta-ata
+ - sms
+ - smu-rpm-fans
- smu-sat
+ - smu-sensors
+ - snapper
- swim3
+ - tumbler
+ - u3-agp
+ - u3-dart
+ - u3-ht
+ - u4-dart
+ - u4-pcie
+ - U4-pcie
+ - uni-n-i2c
+ - uni-north
- description: Legacy compatibles used on other PowerPC devices
enum:
+ - 1682m-gizmo
+ - 1682m-gpio
- 1682m-rng
+ - 1682m-sdc
+ - amcc,ppc440epx-rng
+ - amcc,ppc460ex-bcsr
+ - amcc,ppc460ex-crypto
+ - amcc,ppc460ex-rng
+ - amcc,ppc460sx-crypto
+ - amcc,ppc4xx-crypto
+ - amcc,sata-460ex
+ - CBEA,platform-open-pic
+ - CBEA,platform-spider-pic
+ - direct-mapped
+ - display
+ - gpio-mdio
+ - hawk-bridge
+ - hawk-pci
+ - IBM,CBEA
- IBM,lhca
- IBM,lhea
- IBM,lhea-ethernet
+ - ibm,axon-msic
+ - Momentum,Apache
+ - Momentum,Maple
+ - mai-logic,articia-s
+ - mpc10x-pci
- mpc5200b-fec-phy
- mpc5200-serial
- mpc5200-sram
+ - nintendo,flipper
+ - nintendo,flipper-exi
+ - nintendo,flipper-pi
+ - nintendo,flipper-pic
+ - nintendo,hollywood
+ - nintendo,hollywood-pic
+ - nintendo,latte-exi
+ - nintendo,latte-srnprot
- ohci-be
- ohci-bigendian
- ohci-le
+ - PA6T-1682M
+ - pasemi,1682m-iob
+ - pasemi,localbus
+ - pasemi,localbus-nand
+ - pasemi,nemo
+ - pasemi,pwrficient
+ - pasemi,pwrficient-rng
+ - pasemi,rootbus
+ - pasemi,sdc
+ - soc
+ - sony,ps3
+ - sti,platform-spider-pic
- description: Legacy compatibles used on SPARC devices
enum:
- bq4802
- ds1287
+ - i2cpcf,8584
- isa-m5819p
- isa-m5823p
- m5819
+ - qcn
- sab82532
+ - su
+ - sun4v
- SUNW,bbc-beep
- SUNW,bbc-i2c
- SUNW,CS4231
- compat1
- compat2
- compat3
+ - gpio-mockup
+ - gpio-simulator
+ - gpio-virtuser
- linux,spi-loopback-test
- mailbox-test
- regulator-virtual-consumer
+ - test-device
- description:
Devices on MIPS platform, without any DTS users. These are
interrupt-controller:
description:
This property applies if either keypad,num-rows lower than 8 or
- keypad,num-columns lower than 10.
+ keypad,num-columns lower than 10. This property is optional if
+ keypad,num-rows or keypad,num-columns are not specified as the
+ device is then configured to be used purely for gpio during which
+ interrupts may or may not be utilized.
'#interrupt-cells':
const: 2
minItems: 1
maxItems: 2
+dependencies:
+ keypad,num-rows:
+ - linux,keymap
+ - keypad,num-columns
+ keypad,num-columns:
+ - linux,keymap
+ - keypad,num-rows
+ linux,keymap:
+ - keypad,num-rows
+ - keypad,num-columns
+ - interrupts
+ interrupt-controller:
+ - interrupts
+
required:
- compatible
- reg
- - interrupts
- - keypad,num-rows
- - keypad,num-columns
- - linux,keymap
unevaluatedProperties: false
>;
};
};
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio@34 {
+ compatible = "adi,adp5588";
+ reg = <0x34>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+
...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cirrus,ep9307-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus ep93xx keypad
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+allOf:
+ - $ref: /schemas/input/matrix-keymap.yaml#
+
+description:
+ The KPP is designed to interface with a keypad matrix with 2-point contact
+ or 3-point contact keys. The KPP is designed to simplify the software task
+ of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
+ and decoding one or multiple keys pressed simultaneously on a keypad.
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9307-keypad
+ - items:
+ - enum:
+ - cirrus,ep9312-keypad
+ - cirrus,ep9315-keypad
+ - const: cirrus,ep9307-keypad
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ debounce-delay-ms:
+ description: |
+ Time in microseconds that key must be pressed or
+ released for state change interrupt to trigger.
+
+ cirrus,prescale:
+ description: row/column counter pre-scaler load value
+ $ref: /schemas/types.yaml#/definitions/uint16
+ maximum: 1023
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+ keypad@800f0000 {
+ compatible = "cirrus,ep9307-keypad";
+ reg = <0x800f0000 0x0c>;
+ interrupt-parent = <&vic0>;
+ interrupts = <29>;
+ clocks = <&eclk EP93XX_CLK_KEYPAD>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_default_pins>;
+ linux,keymap = <KEY_UP>,
+ <KEY_DOWN>,
+ <KEY_VOLUMEDOWN>,
+ <KEY_HOME>,
+ <KEY_RIGHT>,
+ <KEY_LEFT>,
+ <KEY_ENTER>,
+ <KEY_VOLUMEUP>,
+ <KEY_F6>,
+ <KEY_F8>,
+ <KEY_F9>,
+ <KEY_F10>,
+ <KEY_F1>,
+ <KEY_F2>,
+ <KEY_F3>,
+ <KEY_POWER>;
+ };
- enum:
- elan,ekth5015m
- const: elan,ekth6915
- - const: elan,ekth6915
+ - enum:
+ - elan,ekth6915
+ - elan,ekth6a12nay
reg:
const: 0x10
- qcom,pmi632-vib
- items:
- enum:
+ - qcom,pm6150-vib
- qcom,pm7250b-vib
- qcom,pm7325b-vib
- qcom,pm7550ba-vib
+++ /dev/null
-Rotary encoder DT bindings
-
-Required properties:
-- gpios: a spec for at least two GPIOs to be used, most significant first
-
-Optional properties:
-- linux,axis: the input subsystem axis to map to this rotary encoder.
- Defaults to 0 (ABS_X / REL_X)
-- rotary-encoder,steps: Number of steps in a full turnaround of the
- encoder. Only relevant for absolute axis. Defaults to 24 which is a
- typical value for such devices.
-- rotary-encoder,relative-axis: register a relative axis rather than an
- absolute one. Relative axis will only generate +1/-1 events on the input
- device, hence no steps need to be passed.
-- rotary-encoder,rollover: Automatic rollover when the rotary value becomes
- greater than the specified steps or smaller than 0. For absolute axis only.
-- rotary-encoder,steps-per-period: Number of steps (stable states) per period.
- The values have the following meaning:
- 1: Full-period mode (default)
- 2: Half-period mode
- 4: Quarter-period mode
-- wakeup-source: Boolean, rotary encoder can wake up the system.
-- rotary-encoder,encoding: String, the method used to encode steps.
- Supported are "gray" (the default and more common) and "binary".
-
-Deprecated properties:
-- rotary-encoder,half-period: Makes the driver work on half-period mode.
- This property is deprecated. Instead, a 'steps-per-period ' value should
- be used, such as "rotary-encoder,steps-per-period = <2>".
-
-See Documentation/input/devices/rotary-encoder.rst for more information.
-
-Example:
-
- rotary@0 {
- compatible = "rotary-encoder";
- gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */
- linux,axis = <0>; /* REL_X */
- rotary-encoder,encoding = "gray";
- rotary-encoder,relative-axis;
- };
-
- rotary@1 {
- compatible = "rotary-encoder";
- gpios = <&gpio 21 0>, <&gpio 22 0>;
- linux,axis = <1>; /* ABS_Y */
- rotary-encoder,steps = <24>;
- rotary-encoder,encoding = "binary";
- rotary-encoder,rollover;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/rotary-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rotary encoder
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ See Documentation/input/devices/rotary-encoder.rst for more information.
+
+properties:
+ compatible:
+ const: rotary-encoder
+
+ gpios:
+ minItems: 2
+
+ linux,axis:
+ default: 0
+ description:
+ the input subsystem axis to map to this rotary encoder.
+ Defaults to 0 (ABS_X / REL_X)
+
+ rotary-encoder,steps:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 24
+ description:
+ Number of steps in a full turnaround of the
+ encoder. Only relevant for absolute axis. Defaults to 24 which is a
+ typical value for such devices.
+
+ rotary-encoder,relative-axis:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ register a relative axis rather than an
+ absolute one. Relative axis will only generate +1/-1 events on the input
+ device, hence no steps need to be passed.
+
+ rotary-encoder,rollover:
+ $ref: /schemas/types.yaml#/definitions/int32
+ description:
+ Automatic rollover when the rotary value becomes
+ greater than the specified steps or smaller than 0. For absolute axis only.
+
+ rotary-encoder,steps-per-period:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 1
+ enum: [1, 2, 4]
+ description: |
+ Number of steps (stable states) per period.
+ The values have the following meaning:
+ 1: Full-period mode (default)
+ 2: Half-period mode
+ 4: Quarter-period mode
+
+ wakeup-source: true
+
+ rotary-encoder,encoding:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: the method used to encode steps.
+ enum: [gray, binary]
+
+ rotary-encoder,half-period:
+ $ref: /schemas/types.yaml#/definitions/flag
+ deprecated: true
+ description:
+ Makes the driver work on half-period mode.
+ This property is deprecated. Instead, a 'steps-per-period ' value should
+ be used, such as "rotary-encoder,steps-per-period = <2>".
+
+required:
+ - compatible
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ rotary {
+ compatible = "rotary-encoder";
+ gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */
+ linux,axis = <0>; /* REL_X */
+ rotary-encoder,encoding = "gray";
+ rotary-encoder,relative-axis;
+ };
+
+++ /dev/null
-* Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
-
-Required properties:
-- compatible : for SPI slave, use "adi,ad7879"
- for I2C slave, use "adi,ad7879-1"
-- reg : SPI chipselect/I2C slave address
- See spi-bus.txt for more SPI slave properties
-- interrupts : touch controller interrupt
-- touchscreen-max-pressure : maximum reported pressure
-- adi,resistance-plate-x : total resistance of X-plate (for pressure
- calculation)
-Optional properties:
-- touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
-- adi,first-conversion-delay : 0-12: In 128us steps (starting with 128us)
- 13 : 2.560ms
- 14 : 3.584ms
- 15 : 4.096ms
- This property has to be a '/bits/ 8' value
-- adi,acquisition-time : 0: 2us
- 1: 4us
- 2: 8us
- 3: 16us
- This property has to be a '/bits/ 8' value
-- adi,median-filter-size : 0: disabled
- 1: 4 measurements
- 2: 8 measurements
- 3: 16 measurements
- This property has to be a '/bits/ 8' value
-- adi,averaging : 0: 2 middle values (1 if median disabled)
- 1: 4 middle values
- 2: 8 middle values
- 3: 16 values
- This property has to be a '/bits/ 8' value
-- adi,conversion-interval: : 0 : convert one time only
- 1-255: 515us + val * 35us (up to 9.440ms)
- This property has to be a '/bits/ 8' value
-- gpio-controller : Switch AUX/VBAT/GPIO pin to GPIO mode
-
-Example:
-
- touchscreen0@2c {
- compatible = "adi,ad7879-1";
- reg = <0x2c>;
- interrupt-parent = <&gpio1>;
- interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
- touchscreen-max-pressure = <4096>;
- adi,resistance-plate-x = <120>;
- adi,first-conversion-delay = /bits/ 8 <3>;
- adi,acquisition-time = /bits/ 8 <1>;
- adi,median-filter-size = /bits/ 8 <2>;
- adi,averaging = /bits/ 8 <1>;
- adi,conversion-interval = /bits/ 8 <255>;
- };
-
- touchscreen1@1 {
- compatible = "adi,ad7879";
- spi-max-frequency = <5000000>;
- reg = <1>;
- spi-cpol;
- spi-cpha;
- gpio-controller;
- interrupt-parent = <&gpio1>;
- interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
- touchscreen-max-pressure = <4096>;
- adi,resistance-plate-x = <120>;
- adi,first-conversion-delay = /bits/ 8 <3>;
- adi,acquisition-time = /bits/ 8 <1>;
- adi,median-filter-size = /bits/ 8 <2>;
- adi,averaging = /bits/ 8 <1>;
- adi,conversion-interval = /bits/ 8 <255>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/adi,ad7879.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ description: |
+ for SPI slave, use "adi,ad7879"
+ for I2C slave, use "adi,ad7879-1"
+ enum:
+ - adi,ad7879
+ - adi,ad7879-1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ touchscreen-max-pressure:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum reported pressure
+
+ adi,resistance-plate-x:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: total resistance of X-plate (for pressure calculation)
+
+ touchscreen-swapped-x-y:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: X and Y axis are swapped (boolean)
+
+ adi,first-conversion-delay:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 0
+ minimum: 0
+ maximum: 15
+ description: |
+ 0-12: In 128us steps (starting with 128us)
+ 13 : 2.560ms
+ 14 : 3.584ms
+ 15 : 4.096ms
+ This property has to be a '/bits/ 8' value
+
+ adi,acquisition-time:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 0
+ enum: [0, 1, 2, 3]
+ description: |
+ 0: 2us
+ 1: 4us
+ 2: 8us
+ 3: 16us
+ This property has to be a '/bits/ 8' value
+
+ adi,median-filter-size:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 0
+ enum: [0, 1, 2, 3]
+ description: |
+ 0: disabled
+ 1: 4 measurements
+ 2: 8 measurements
+ 3: 16 measurements
+ This property has to be a '/bits/ 8' value
+
+ adi,averaging:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 0
+ enum: [0, 1, 2, 3]
+ description: |
+ 0: 2 middle values (1 if median disabled)
+ 1: 4 middle values
+ 2: 8 middle values
+ 3: 16 values
+ This property has to be a '/bits/ 8' value
+
+ adi,conversion-interval:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 0
+ description: |
+ 0 : convert one time only
+ 1-255: 515us + val * 35us (up to 9.440ms)
+ This property has to be a '/bits/ 8' value
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen0@2c {
+ compatible = "adi,ad7879-1";
+ reg = <0x2c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-max-pressure = <4096>;
+ adi,resistance-plate-x = <120>;
+ adi,first-conversion-delay = /bits/ 8 <3>;
+ adi,acquisition-time = /bits/ 8 <1>;
+ adi,median-filter-size = /bits/ 8 <2>;
+ adi,averaging = /bits/ 8 <1>;
+ adi,conversion-interval = /bits/ 8 <255>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen1@1 {
+ compatible = "adi,ad7879";
+ reg = <1>;
+ spi-max-frequency = <5000000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-max-pressure = <4096>;
+ adi,resistance-plate-x = <120>;
+ adi,first-conversion-delay = /bits/ 8 <3>;
+ adi,acquisition-time = /bits/ 8 <1>;
+ adi,median-filter-size = /bits/ 8 <2>;
+ adi,averaging = /bits/ 8 <1>;
+ adi,conversion-interval = /bits/ 8 <255>;
+ };
+ };
+++ /dev/null
-Device tree bindings for TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046
-SPI driven touch screen controllers.
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in
-
- Documentation/devicetree/bindings/spi/spi-bus.txt
-
-must be specified.
-
-Additional required properties:
-
- compatible Must be one of the following, depending on the
- model:
- "ti,tsc2046"
- "ti,ads7843"
- "ti,ads7845"
- "ti,ads7846"
- "ti,ads7873"
-
- interrupts An interrupt node describing the IRQ line the chip's
- !PENIRQ pin is connected to.
- vcc-supply A regulator node for the supply voltage.
-
-
-Optional properties:
-
- ti,vref-delay-usecs vref supply delay in usecs, 0 for
- external vref (u16).
- ti,vref-mv The VREF voltage, in millivolts (u16).
- Set to 0 to use internal references
- (ADS7846).
- ti,keep-vref-on set to keep vref on for differential
- measurements as well
- ti,settle-delay-usec Settling time of the analog signals;
- a function of Vcc and the capacitance
- on the X/Y drivers. If set to non-zero,
- two samples are taken with settle_delay
- us apart, and the second one is used.
- ~150 uSec with 0.01uF caps (u16).
- ti,penirq-recheck-delay-usecs If set to non-zero, after samples are
- taken this delay is applied and penirq
- is rechecked, to help avoid false
- events. This value is affected by the
- material used to build the touch layer
- (u16).
- ti,x-plate-ohms Resistance of the X-plate,
- in Ohms (u16).
- ti,y-plate-ohms Resistance of the Y-plate,
- in Ohms (u16).
- ti,x-min Minimum value on the X axis (u16).
- ti,y-min Minimum value on the Y axis (u16).
- ti,debounce-tol Tolerance used for filtering (u16).
- ti,debounce-rep Additional consecutive good readings
- required after the first two (u16).
- ti,pendown-gpio-debounce Platform specific debounce time for the
- pendown-gpio (u32).
- pendown-gpio GPIO handle describing the pin the !PENIRQ
- line is connected to.
- ti,hsync-gpios GPIO line to poll for hsync
- wakeup-source use any event on touchscreen as wakeup event.
- (Legacy property support: "linux,wakeup")
- touchscreen-size-x General touchscreen binding, see [1].
- touchscreen-size-y General touchscreen binding, see [1].
- touchscreen-max-pressure General touchscreen binding, see [1].
- touchscreen-min-pressure General touchscreen binding, see [1].
- touchscreen-average-samples General touchscreen binding, see [1].
- touchscreen-inverted-x General touchscreen binding, see [1].
- touchscreen-inverted-y General touchscreen binding, see [1].
- touchscreen-swapped-x-y General touchscreen binding, see [1].
-
-[1] All general touchscreen properties are described in
- Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
-
-Deprecated properties:
-
- ti,swap-xy swap x and y axis
- ti,x-max Maximum value on the X axis (u16).
- ti,y-max Maximum value on the Y axis (u16).
- ti,pressure-min Minimum reported pressure value
- (threshold) - u16.
- ti,pressure-max Maximum reported pressure value (u16).
- ti,debounce-max Max number of additional readings per
- sample (u16).
-
-Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
-
- spi_controller {
- tsc2046@0 {
- reg = <0>; /* CS0 */
- compatible = "ti,tsc2046";
- interrupt-parent = <&gpio1>;
- interrupts = <8 0>; /* BOOT6 / GPIO 8 */
- spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio1 8 0>;
- vcc-supply = <®_vcc3>;
-
- ti,x-min = /bits/ 16 <0>;
- ti,x-max = /bits/ 16 <8000>;
- ti,y-min = /bits/ 16 <0>;
- ti,y-max = /bits/ 16 <4800>;
- ti,x-plate-ohms = /bits/ 16 <40>;
- ti,pressure-max = /bits/ 16 <255>;
-
- wakeup-source;
- };
- };
#address-cells = <1>;
#size-cells = <0>;
- touch@56 {
+ touchscreen@56 {
compatible = "azoteq,iqs7210a";
reg = <0x56>;
irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
#address-cells = <1>;
#size-cells = <0>;
- touch@56 {
+ touchscreen@56 {
compatible = "azoteq,iqs7211e";
reg = <0x56>;
irq-gpios = <&gpio 4 (GPIO_ACTIVE_LOW |
+++ /dev/null
-* Toradex Colibri VF50 Touchscreen driver
-
-Required Properties:
-- compatible must be toradex,vf50-touchscreen
-- io-channels: adc channels being used by the Colibri VF50 module
- IIO ADC for Y-, X-, Y+, X+ connections
-- xp-gpios: FET gate driver for input of X+
-- xm-gpios: FET gate driver for input of X-
-- yp-gpios: FET gate driver for input of Y+
-- ym-gpios: FET gate driver for input of Y-
-- interrupts: pen irq interrupt for touch detection, signal from X plate
-- pinctrl-names: "idle", "default"
-- pinctrl-0: pinctrl node for pen/touch detection, pinctrl must provide
- pull-up resistor on X+, X-.
-- pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
-- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
-
-Example:
-
- touchctrl: vf50_touchctrl {
- compatible = "toradex,vf50-touchscreen";
- io-channels = <&adc1 0>,<&adc0 0>,
- <&adc0 1>,<&adc1 2>;
- xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
- yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&gpio0>;
- interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "idle","default";
- pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
- pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
- vf50-ts-min-pressure = <200>;
- };
i2c {
#address-cells = <1>;
#size-cells = <0>;
- edt-ft5x06@38 {
+ touchscreen@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&gpio2>;
i2c {
#address-cells = <1>;
#size-cells = <0>;
- gt928@5d {
+ touchscreen@5d {
compatible = "goodix,gt928";
reg = <0x5d>;
interrupt-parent = <&gpio>;
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,ads7843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI's SPI driven touch screen controllers
+
+maintainers:
+ - Alexander Stein <alexander.stein@ew.tq-group.com>
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+ - Marek Vasut <marex@denx.de>
+
+description:
+ TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046 SPI driven touch screen
+ controllers.
+
+properties:
+ compatible:
+ enum:
+ - ti,ads7843
+ - ti,ads7845
+ - ti,ads7846
+ - ti,ads7873
+ - ti,tsc2046
+
+ interrupts:
+ maxItems: 1
+
+ pendown-gpio:
+ maxItems: 1
+ description:
+ GPIO handle describing the pin the !PENIRQ line is connected to.
+
+ vcc-supply:
+ description:
+ A regulator node for the supply voltage.
+
+ wakeup-source: true
+
+ ti,debounce-max:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Max number of additional readings per sample.
+
+ ti,debounce-rep:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Additional consecutive good readings required after the first two.
+
+ ti,debounce-tol:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Tolerance used for filtering.
+
+ ti,hsync-gpios:
+ maxItems: 1
+ description:
+ GPIO line to poll for hsync.
+
+ ti,keep-vref-on:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set to keep Vref on for differential measurements as well.
+
+ ti,pendown-gpio-debounce:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Platform specific debounce time for the pendown-gpio.
+
+ ti,penirq-recheck-delay-usecs:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ If set to non-zero, after samples are taken this delay is applied and
+ penirq is rechecked, to help avoid false events. This value is
+ affected by the material used to build the touch layer.
+
+ ti,pressure-max:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Maximum reported pressure value.
+
+ ti,pressure-min:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Minimum reported pressure value (threshold).
+
+ ti,settle-delay-usec:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Settling time of the analog signals; a function of Vcc and the
+ capacitance on the X/Y drivers. If set to non-zero, two samples are
+ taken with settle_delay us apart, and the second one is used. ~150
+ uSec with 0.01uF caps.
+
+ ti,swap-xy:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Swap x and y axis.
+
+ ti,vref-delay-usecs:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Vref supply delay in usecs, 0 for external Vref.
+
+ ti,vref-mv:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ The VREF voltage, in millivolts.
+ Set to 0 to use internal references (ADS7846).
+
+ ti,x-plate-ohms:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Resistance of the X-plate, in Ohms.
+
+ ti,x-max:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Maximum value on the X axis.
+
+ ti,x-min:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Minimum value on the X axis.
+
+ ti,y-plate-ohms:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Resistance of the Y-plate, in Ohms.
+
+ ti,y-max:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Maximum value on the Y axis.
+
+ ti,y-min:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description:
+ Minimum value on the Y axis.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: touchscreen.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi{
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@0 {
+ compatible = "ti,tsc2046";
+ reg = <0>; /* CS0 */
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 0>; /* BOOT6 / GPIO 8 */
+ pendown-gpio = <&gpio1 8 0>;
+ spi-max-frequency = <1000000>;
+ vcc-supply = <®_vcc3>;
+ wakeup-source;
+
+ ti,pressure-max = /bits/ 16 <255>;
+ ti,x-max = /bits/ 16 <8000>;
+ ti,x-min = /bits/ 16 <0>;
+ ti,x-plate-ohms = /bits/ 16 <40>;
+ ti,y-max = /bits/ 16 <4800>;
+ ti,y-min = /bits/ 16 <0>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/toradex,vf50-touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toradex Colibri VF50 Touchscreen
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+ - Sanchayan Maity <maitysanchayan@gmail.com>
+
+properties:
+ compatible:
+ const: toradex,vf50-touchscreen
+
+ interrupts:
+ maxItems: 1
+
+ io-channels:
+ maxItems: 4
+ description:
+ adc channels being used by the Colibri VF50 module
+ IIO ADC for Y-, X-, Y+, X+ connections
+
+ xp-gpios:
+ description: FET gate driver for input of X+
+
+ xm-gpios:
+ description: FET gate driver for input of X-
+
+ yp-gpios:
+ description: FET gate driver for input of Y+
+
+ ym-gpios:
+ description: FET gate driver for input of Y-
+
+ vf50-ts-min-pressure:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 50
+ maximum: 2000
+ description: pressure level at which to stop measuring X/Y values
+
+required:
+ - compatible
+ - io-channels
+ - xp-gpios
+ - xm-gpios
+ - yp-gpios
+ - ym-gpios
+ - interrupts
+ - vf50-ts-min-pressure
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ touchscreen {
+ compatible = "toradex,vf50-touchscreen";
+ interrupt-parent = <&gpio0>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ io-channels = <&adc1 0>, <&adc0 0>, <&adc0 1>, <&adc1 2>;
+ xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "idle", "default";
+ pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+ pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
+ vf50-ts-min-pressure = <200>;
+ };
allOf:
- $ref: touchscreen.yaml#
+ - $ref: ../input.yaml#
properties:
$nodename:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2]
+ linux,keycodes:
+ description:
+ This property specifies an array of keycodes assigned to the
+ touch-keys that can be present in some touchscreen configurations.
+ If the touch-keys are enabled, controller firmware will assign some
+ touch sense lines to those keys.
+ minItems: 1
+ maxItems: 8
+
touchscreen-size-x: true
touchscreen-size-y: true
touchscreen-fuzz-x: true
$id: http://devicetree.org/schemas/interconnect/qcom,msm8939.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm MSM8939 Network-On-Chip interconnect
+title: Qualcomm MSM8937/MSM8939/MSM8976 Network-On-Chip interconnect
maintainers:
- Konrad Dybcio <konradybcio@kernel.org>
-description: |
- The Qualcomm MSM8939 interconnect providers support adjusting the
- bandwidth requirements between the various NoC fabrics.
+description:
+ The Qualcomm MSM8937/MSM8939/MSM8976 interconnect providers support
+ adjusting the bandwidth requirements between the various NoC fabrics.
allOf:
- $ref: qcom,rpm-common.yaml#
properties:
compatible:
enum:
+ - qcom,msm8937-bimc
+ - qcom,msm8937-pcnoc
+ - qcom,msm8937-snoc
- qcom,msm8939-bimc
- qcom,msm8939-pcnoc
- qcom,msm8939-snoc
+ - qcom,msm8976-bimc
+ - qcom,msm8976-pcnoc
+ - qcom,msm8976-snoc
reg:
maxItems: 1
properties:
compatible:
- const: qcom,msm8939-snoc-mm
+ enum:
+ - qcom,msm8937-snoc-mm
+ - qcom,msm8939-snoc-mm
+ - qcom,msm8976-snoc-mm
required:
- compatible
compatible = "qcom,msm8939-snoc";
reg = <0x00580000 0x14000>;
#interconnect-cells = <1>;
- };
-
- bimc: interconnect@400000 {
- compatible = "qcom,msm8939-bimc";
- reg = <0x00400000 0x62000>;
- #interconnect-cells = <1>;
snoc_mm: interconnect-snoc {
compatible = "qcom,msm8939-snoc-mm";
The Qualcomm MSM8953 interconnect providers support adjusting the
bandwidth requirements between the various NoC fabrics.
- See also:
- - dt-bindings/interconnect/qcom,msm8953.h
+ See also: include/dt-bindings/interconnect/qcom,msm8953.h
properties:
compatible:
- items:
- enum:
- qcom,qcm2290-cpu-bwmon
+ - qcom,sa8775p-cpu-bwmon
- qcom,sc7180-cpu-bwmon
- qcom,sc7280-cpu-bwmon
- qcom,sc8280xp-cpu-bwmon
- const: qcom,sdm845-bwmon # BWMON v4, unified register space
- items:
- enum:
+ - qcom,sa8775p-llcc-bwmon
- qcom,sc7180-llcc-bwmon
- qcom,sc8280xp-llcc-bwmon
- qcom,sm6350-cpu-bwmon
- qcom,sdx65-system-noc
- qcom,sm8150-aggre1-noc
- qcom,sm8150-aggre2-noc
- - qcom,sm8150-camnoc-noc
+ - qcom,sm8150-camnoc-virt
- qcom,sm8150-compute-noc
- qcom,sm8150-config-noc
- qcom,sm8150-dc-noc
properties:
compatible:
enum:
+ - qcom,sc8180x-camnoc-virt
+ - qcom,sc8180x-mc-virt
+ - qcom,sc8180x-qup-virt
- qcom,sdx65-mc-virt
- qcom,sm8250-qup-virt
then:
This device also represents the FIQ interrupt sources on platforms using AIC,
which do not go through a discrete interrupt controller.
+ IPIs may be performed via MMIO registers on all variants of AIC. Starting
+ from A11, system registers may also be used for "fast" IPIs. Starting from
+ M1, even faster IPIs within the same cluster may be achieved by writing to
+ a "local" fast IPI register as opposed to using the "global" fast IPI
+ register.
+
allOf:
- $ref: /schemas/interrupt-controller.yaml#
properties:
compatible:
items:
- - const: apple,t8103-aic
+ - enum:
+ - apple,s5l8960x-aic
+ - apple,t7000-aic
+ - apple,s8000-aic
+ - apple,t8010-aic
+ - apple,t8015-aic
+ - apple,t8103-aic
- const: apple,aic
interrupt-controller: true
The 4th cell is a phandle to a node describing a set of CPUs this
interrupt is affine to. The interrupt must be a PPI, and the node
pointed must be a subnode of the "ppi-partitions" subnode. For
- interrupt types other than PPI or PPIs that are not partitionned,
+ interrupt types other than PPI or PPIs that are not partitioned,
this cell must be zero. See the "ppi-partitions" node description
below.
+++ /dev/null
-Aspeed Vectored Interrupt Controller
-
-These bindings are for the Aspeed interrupt controller. The AST2400 and
-AST2500 SoC families include a legacy register layout before a re-designed
-layout, but the bindings do not prescribe the use of one or the other.
-
-Required properties:
-
-- compatible : "aspeed,ast2400-vic"
- "aspeed,ast2500-vic"
-
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value shall be 1.
-
-Example:
-
- vic: interrupt-controller@1e6c0080 {
- compatible = "aspeed,ast2400-vic";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x1e6c0080 0x80>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2400-vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed Vectored Interrupt Controller
+
+maintainers:
+ - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+description:
+ The AST2400 and AST2500 SoC families include a legacy register layout before
+ a redesigned layout, but the bindings do not prescribe the use of one or the
+ other.
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-vic
+ - aspeed,ast2500-vic
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+ description:
+ Specifies the number of cells needed to encode an interrupt source. It
+ must be 1 as the VIC has no configuration options for interrupt sources.
+ The single cell defines the interrupt number.
+
+ valid-sources:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 2
+ description:
+ A bitmap of supported sources for the implementation.
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@1e6c0080 {
+ compatible = "aspeed,ast2400-vic";
+ reg = <0x1e6c0080 0x80>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-sources = <0xffffffff 0x0007ffff>;
+ };
+
+...
+++ /dev/null
-BCM2836 per-CPU interrupt controller
-
-The BCM2836 has a per-cpu interrupt controller for the timer, PMU
-events, and SMP IPIs. One of the CPUs may receive interrupts for the
-peripheral (GPU) events, which chain to the BCM2835-style interrupt
-controller.
-
-Required properties:
-
-- compatible: Should be "brcm,bcm2836-l1-intc"
-- reg: Specifies base physical address and size of the
- registers
-- interrupt-controller: Identifies the node as an interrupt controller
-- #interrupt-cells: Specifies the number of cells needed to encode an
- interrupt source. The value shall be 2
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-The interrupt sources are as follows:
-
-0: CNTPSIRQ
-1: CNTPNSIRQ
-2: CNTHPIRQ
-3: CNTVIRQ
-8: GPU_FAST
-9: PMU_FAST
-
-Example:
-
-local_intc: local_intc {
- compatible = "brcm,bcm2836-l1-intc";
- reg = <0x40000000 0x100>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&local_intc>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm2836-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2836 per-CPU interrupt controller
+
+maintainers:
+ - Stefan Wahren <wahrenst@gmx.net>
+ - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description:
+ The BCM2836 has a per-cpu interrupt controller for the timer, PMU
+ events, and SMP IPIs. One of the CPUs may receive interrupts for the
+ peripheral (GPU) events, which chain to the BCM2835-style interrupt
+ controller.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ const: brcm,bcm2836-l1-intc
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ local_intc: interrupt-controller@40000000 {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x40000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&local_intc>;
+ };
+...
- enum:
- fsl,imx8m-irqsteer
- fsl,imx8mp-irqsteer
+ - fsl,imx8qm-irqsteer
- fsl,imx8qxp-irqsteer
- const: fsl,imx-irqsteer
contains:
enum:
- fsl,imx8mp-irqsteer
+ - fsl,imx8qm-irqsteer
- fsl,imx8qxp-irqsteer
then:
required:
enum:
- fsl,ls1043a-extirq
- fsl,ls1046a-extirq
- - fsl,ls1088a-extirq
- - fsl,ls2080a-extirq
- - fsl,lx2160a-extirq
then:
properties:
interrupt-map:
- const: 0xf
- const: 0
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,ls1088a-extirq
+ - fsl,ls2080a-extirq
+ - fsl,lx2160a-extirq
+# The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
+# function to parser interrupt-map. So it doesn't consider '#address-size'
+# in parent interrupt controller, such as GIC.
+#
+# When dt-binding verify interrupt-map, item data matrix is spitted at
+# incorrect position. Remove interrupt-map restriction because it always
+# wrong.
+
+ then:
+ properties:
+ interrupt-map-mask:
+ items:
+ - const: 0xf
+ - const: 0
+
additionalProperties: false
examples:
items:
- enum:
- qcom,qdu1000-pdc
+ - qcom,sa8255p-pdc
- qcom,sa8775p-pdc
- qcom,sc7180-pdc
- qcom,sc7280-pdc
- allwinner,sun20i-d1-plic
- sophgo,cv1800b-plic
- sophgo,cv1812h-plic
+ - sophgo,sg2002-plic
- sophgo,sg2042-plic
- thead,th1520-plic
- const: thead,c900-plic
items:
- enum:
- qcom,qcm2290-smmu-500
+ - qcom,qcs8300-smmu-500
- qcom,qdu1000-smmu-500
+ - qcom,sa8255p-smmu-500
- qcom,sa8775p-smmu-500
- qcom,sc7180-smmu-500
- qcom,sc7280-smmu-500
items:
- enum:
- qcom,qcm2290-smmu-500
+ - qcom,sa8255p-smmu-500
- qcom,sa8775p-smmu-500
- qcom,sc7280-smmu-500
- qcom,sc8180x-smmu-500
- cavium,smmu-v2
- marvell,ap806-smmu-500
- nvidia,smmu-500
+ - qcom,qcs8300-smmu-500
- qcom,qdu1000-smmu-500
+ - qcom,sa8255p-smmu-500
- qcom,sc7180-smmu-500
- qcom,sdm670-smmu-500
- qcom,sdm845-smmu-500
IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number)
And the minimum output current formula:
IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number)
- where max-current-switch-number is determinated by led configuration
+ where max-current-switch-number is determined by led configuration
and depends on how leds are physically connected to the led driver.
allOf:
# LED indicates NAND memory activity (deprecated),
# in new implementations use "mtd"
- nand-disk
+ # LED indicates network activity
+ - netdev
# No trigger assigned to the LED. This is the default mode
# if trigger is absent
- none
+++ /dev/null
-* Texas Instruments - LM3692x Highly Efficient White LED Driver
-
-The LM3692x is an ultra-compact, highly efficient,
-white-LED driver designed for LCD display backlighting.
-
-The main difference between the LM36922 and LM36923 is the number of
-LED strings it supports. The LM36922 supports two strings while the LM36923
-supports three strings.
-
-Required properties:
- - compatible:
- "ti,lm36922"
- "ti,lm36923"
- - reg : I2C slave address
- - #address-cells : 1
- - #size-cells : 0
-
-Optional properties:
- - enable-gpios : gpio pin to enable/disable the device.
- - vled-supply : LED supply
- - ti,ovp-microvolt: Overvoltage protection in
- micro-volt, can be 17000000, 21000000, 25000000 or
- 29000000. If ti,ovp-microvolt is not specified it
- defaults to 29000000.
-
-Required child properties:
- - reg : 0 - Will enable all LED sync paths
- 1 - Will enable the LED1 sync
- 2 - Will enable the LED2 sync
- 3 - Will enable the LED3 sync (LM36923 only)
-
-Optional child properties:
- - function : see Documentation/devicetree/bindings/leds/common.txt
- - color : see Documentation/devicetree/bindings/leds/common.txt
- - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
- - linux,default-trigger :
- see Documentation/devicetree/bindings/leds/common.txt
- - led-max-microamp :
- see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-#include <dt-bindings/leds/common.h>
-
-led-controller@36 {
- compatible = "ti,lm3692x";
- reg = <0x36>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- vled-supply = <&vbatt>;
- ti,ovp-microvolt = <29000000>;
-
- led@0 {
- reg = <0>;
- function = LED_FUNCTION_BACKLIGHT;
- color = <LED_COLOR_ID_WHITE>;
- linux,default-trigger = "backlight";
- led-max-microamp = <20000>;
- };
-}
-
-For more product information please see the link below:
-https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
+++ /dev/null
-LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
-
-The SC27xx breathing light controller supports to 3 outputs:
-red LED, green LED and blue LED. Each LED can work at normal
-PWM mode or breath light mode.
-
-Required properties:
-- compatible: Should be "sprd,sc2731-bltc".
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- reg: Specify the controller address.
-
-Required child properties:
-- reg: Port this LED is connected to.
-
-Optional child properties:
-- function: See Documentation/devicetree/bindings/leds/common.txt.
-- color: See Documentation/devicetree/bindings/leds/common.txt.
-- label: See Documentation/devicetree/bindings/leds/common.txt (deprecated).
-
-Examples:
-
-led-controller@200 {
- compatible = "sprd,sc2731-bltc";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x200>;
-
- led@0 {
- color = <LED_COLOR_ID_RED>;
- reg = <0x0>;
- };
-
- led@1 {
- color = <LED_COLOR_ID_GREEN>;
- reg = <0x1>;
- };
-
- led@2 {
- color = <LED_COLOR_ID_BLUE>;
- reg = <0x2>;
- };
-};
- Marek Vasut <marex@denx.de>
description:
- The NXP PCA9952/PCA9955B are programmable LED controllers connected via I2C
- that can drive 16 separate lines. Each of them can be individually switched
+ The NXP PCA995x family are programmable LED controllers connected via I2C
+ that can drive separate lines. Each of them can be individually switched
on and off, and brightness can be controlled via individual PWM.
Datasheets are available at
https://www.nxp.com/docs/en/data-sheet/PCA9952_PCA9955.pdf
https://www.nxp.com/docs/en/data-sheet/PCA9955B.pdf
+ https://www.nxp.com/docs/en/data-sheet/PCA9956B.pdf
properties:
compatible:
enum:
- nxp,pca9952
- nxp,pca9955b
+ - nxp,pca9956b
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/sprd,sc2731-bltc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 PMIC breathing light controller
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+ The SC2731 breathing light controller supports up to 3 outputs:
+ red LED, green LED and blue LED. Each LED can work at normal PWM mode
+ or breath light mode.
+
+properties:
+ compatible:
+ const: sprd,sc2731-bltc
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^led@[0-2]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 2
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@200 {
+ compatible = "sprd,sc2731-bltc";
+ reg = <0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <0x1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <0x2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti.lm36922.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - LM3692x Highly Efficient White LED Driver
+
+maintainers:
+ - Dan Murphy <dmurphy@ti.com>
+
+description: |
+ The LM3692x is an ultra-compact, highly efficient,
+ white-LED driver designed for LCD display backlighting.
+
+ The main difference between the LM36922 and LM36923 is the number of
+ LED strings it supports. The LM36922 supports two strings while the LM36923
+ supports three strings.
+
+ For more product information please see the link below:
+ https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
+
+properties:
+ compatible:
+ enum:
+ - ti,lm36922
+ - ti,lm36923
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ enable-gpios:
+ description: gpio pin to enable/disable the device.
+
+ vled-supply:
+ description: LED supply
+
+ ti,ovp-microvolt:
+ description: Overvoltage protection.
+ default: 29000000
+ enum: [17000000, 21000000, 25000000, 29000000]
+
+patternProperties:
+ '^led@[0-3]$':
+ type: object
+ $ref: common.yaml
+ properties:
+ reg:
+ enum: [0, 1, 2, 3]
+ description: |
+ 0 - Will enable all LED sync paths
+ 1 - Will enable the LED1 sync
+ 2 - Will enable the LED2 sync
+ 3 - Will enable the LED3 sync (LM36923 only)
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,lm36922
+ then:
+ properties:
+ led@3: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@36 {
+ compatible = "ti,lm36922";
+ reg = <0x36>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+ ti,ovp-microvolt = <29000000>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_BACKLIGHT;
+ color = <LED_COLOR_ID_WHITE>;
+ linux,default-trigger = "backlight";
+ led-max-microamp = <20000>;
+ };
+ };
+ };
+
number of completion messages for which FlexRM will inject
one MSI interrupt to CPU.
- The 3nd cell contains MSI timer value representing time for
+ The 3rd cell contains MSI timer value representing time for
which FlexRM will wait to accumulate N completion messages
where N is the value specified by 2nd cell above. If FlexRM
does not get required number of completion messages in time
properties:
compatible:
- enum:
- - mediatek,mt8195-adsp-mbox
- - mediatek,mt8186-adsp-mbox
+ oneOf:
+ - enum:
+ - mediatek,mt8186-adsp-mbox
+ - mediatek,mt8195-adsp-mbox
+ - items:
+ - enum:
+ - mediatek,mt8188-adsp-mbox
+ - const: mediatek,mt8186-adsp-mbox
+
"#mbox-cells":
const: 0
compatible:
items:
- enum:
+ - qcom,qcs8300-ipcc
- qcom,qdu1000-ipcc
+ - qcom,sa8255p-ipcc
- qcom,sa8775p-ipcc
- qcom,sc7280-ipcc
- qcom,sc8280xp-ipcc
- items:
- enum:
- amlogic,gxbb-vdec # GXBB (S905)
- - amlogic,gxl-vdec # GXL (S905X, S905D)
+ - amlogic,gxl-vdec # GXL (S905D, S905W, S905X, S905Y)
+ - amlogic,gxlx-vdec # GXLX (S905L)
- amlogic,gxm-vdec # GXM (S912)
- const: amlogic,gx-vdec
- enum:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023-2024 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,og01a1b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OG01A1B Image Sensor
+
+maintainers:
+ - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+description:
+ The OmniVision OG01A1B is black and white CMOS 1.3 Megapixel (1280x1024)
+ image sensor controlled over an I2C-compatible SCCB bus.
+ The sensor transmits images on a MIPI CSI-2 output interface with one or
+ two data lanes.
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: ovti,og01a1b
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ reset-gpios:
+ description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
+ maxItems: 1
+
+ strobe-gpios:
+ description: Input GPIO connected to strobe pad of the sensor.
+ maxItems: 1
+
+ avdd-supply:
+ description: Analogue circuit voltage supply.
+
+ dovdd-supply:
+ description: I/O circuit voltage supply.
+
+ dvdd-supply:
+ description: Digital circuit voltage supply.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+ description:
+ Output port node, single endpoint describing the CSI-2 transmitter.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [1, 2]
+
+ link-frequencies: true
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@60 {
+ compatible = "ovti,og01a1b";
+ reg = <0x60>;
+ clocks = <&clk 0>;
+ reset-gpios = <&gpio 117 GPIO_ACTIVE_LOW>;
+ avdd-supply = <&vreg_3v3>;
+ dovdd-supply = <&vreg_1p8>;
+ dvdd-supply = <&vreg_1p2>;
+
+ port {
+ og01a1b_ep: endpoint {
+ remote-endpoint = <&csiphy_ep>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <500000000>;
+ };
+ };
+ };
+ };
+...
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
+
i2c {
#address-cells = <1>;
#size-cells = <0>;
ovdd-supply = <&camera_vddo_1v8>;
dvdd-supply = <&camera_vddd_1v2>;
+ reset-gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
+
port {
imx335: endpoint {
remote-endpoint = <&cam>;
can be connected to CMOS image sensors from various vendors, supporting both
MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2
or parallel. The hardware is capable of transmitting and receiving MIPI
- interlaved data strams with data types or multiple virtual channel
+ interleaved data streams with data types or multiple virtual channel
identifiers.
allOf:
- const: vcodec_bus
iommus:
+ minItems: 1
maxItems: 2
interconnects:
- renesas,fcpf # FCP for FDP
- items:
- enum:
+ - renesas,r9a07g043u-fcpvd # RZ/G2UL
- renesas,r9a07g044-fcpvd # RZ/G2{L,LC}
- renesas,r9a07g054-fcpvd # RZ/V2L
- const: renesas,fcpv # Generic FCP for VSP fallback
compatible:
contains:
enum:
+ - renesas,r9a07g043u-fcpvd
- renesas,r9a07g044-fcpvd
- renesas,r9a07g054-fcpvd
then:
- renesas,vin-r8a77980 # R-Car V3H
- renesas,vin-r8a77990 # R-Car E3
- renesas,vin-r8a77995 # R-Car D3
+ - items:
+ - enum:
- renesas,vin-r8a779a0 # R-Car V3U
- renesas,vin-r8a779g0 # R-Car V4H
+ - renesas,vin-r8a779h0 # R-Car V4M
+ - const: renesas,rcar-gen4-vin # Generic R-Car Gen4
reg:
maxItems: 1
- renesas,vsp2 # R-Car Gen3 and RZ/G2
- items:
- enum:
+ - renesas,r9a07g043u-vsp2 # RZ/G2UL
- renesas,r9a07g054-vsp2 # RZ/V2L
- const: renesas,r9a07g044-vsp2 # RZ/G2L fallback
compatible:
enum:
- rockchip,rk3568-vepu
+ - rockchip,rk3588-vepu121
reg:
maxItems: 1
- rockchip,rk3568-vpu
- rockchip,rk3588-av1-vpu
- items:
- - const: rockchip,rk3188-vpu
+ - enum:
+ - rockchip,rk3128-vpu
+ - rockchip,rk3188-vpu
- const: rockchip,rk3066-vpu
- items:
- const: rockchip,rk3228-vpu
- const: rockchip,rk3399-vpu
+ - items:
+ - const: rockchip,rk3588-vpu121
+ - const: rockchip,rk3568-vpu
reg:
maxItems: 1
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 2
description: |
- An array specyfing minimum image size in pixels at the FIMC input and
+ An array specifying minimum image size in pixels at the FIMC input and
output DMA, in the first and second cell respectively. Default value
is <16 16>.
properties:
fsl,weim-cs-timing:
items:
- items:
- - description: CSxU
- - description: CSxL
+ - description: CSxU
+ - description: CSxL
- if:
properties:
compatible:
properties:
fsl,weim-cs-timing:
items:
- items:
- - description: CSCRxU
- - description: CSCRxL
- - description: CSCRxA
+ - description: CSCRxU
+ - description: CSCRxL
+ - description: CSCRxA
- if:
properties:
compatible:
properties:
fsl,weim-cs-timing:
items:
- items:
- - description: CSxGCR1
- - description: CSxGCR2
- - description: CSxRCR1
- - description: CSxRCR2
- - description: CSxWCR1
- - description: CSxWCR2
+ - description: CSxGCR1
+ - description: CSxGCR2
+ - description: CSxRCR1
+ - description: CSxRCR2
+ - description: CSxWCR1
+ - description: CSxWCR2
additionalProperties: false
- const: dirmap
- const: wbuf
- clocks: true
+ clocks:
+ minItems: 1
+ maxItems: 2
interrupts:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/adi,adp5585.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5585 Keypad Decoder and I/O Expansion
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+ The ADP5585 is a 10/11 input/output port expander with a built in keypad
+ matrix decoder, programmable logic, reset generator, and PWM generator.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - adi,adp5585-00 # Default
+ - adi,adp5585-01 # 11 GPIOs
+ - adi,adp5585-02 # No pull-up resistors by default on special pins
+ - adi,adp5585-03 # Alternate I2C address
+ - adi,adp5585-04 # Pull-down resistors on all pins by default
+ - const: adi,adp5585
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply: true
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-reserved-ranges: true
+
+ "#pwm-cells":
+ const: 3
+
+patternProperties:
+ "-hog(-[0-9]+)?$":
+ type: object
+
+ required:
+ - gpio-hog
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+ - "#pwm-cells"
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: adi,adp5585-01
+ then:
+ properties:
+ gpio-reserved-ranges: false
+ else:
+ properties:
+ gpio-reserved-ranges:
+ maxItems: 1
+ items:
+ items:
+ - const: 5
+ - const: 1
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ io-expander@34 {
+ compatible = "adi,adp5585-00", "adi,adp5585";
+ reg = <0x34>;
+
+ vdd-supply = <®_3v3>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-reserved-ranges = <5 1>;
+
+ #pwm-cells = <3>;
+ };
+ };
+
+...
"#interrupt-cells":
const: 2
+ mediatek,hp-pull-down:
+ description:
+ Earphone driver positive output stage short to
+ the audio reference ground.
+ type: boolean
+
+ mediatek,micbias0-microvolt:
+ description: Selects MIC Bias 0 output voltage.
+ enum: [1700000, 1800000, 1900000, 2000000,
+ 2100000, 2500000, 2600000, 2700000]
+ default: 1700000
+
+ mediatek,micbias1-microvolt:
+ description: Selects MIC Bias 1 output voltage.
+ enum: [1700000, 1800000, 1900000, 2000000,
+ 2100000, 2500000, 2600000, 2700000]
+ default: 1700000
+
regulators:
type: object
$ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
interrupt-controller;
#interrupt-cells = <2>;
+ mediatek,micbias0-microvolt = <1700000>;
+ mediatek,micbias1-microvolt = <1700000>;
+
regulators {
mt6357_vproc_reg: buck-vproc {
regulator-name = "vproc";
- qcom,msm8998-tcsr
- qcom,qcm2290-tcsr
- qcom,qcs404-tcsr
+ - qcom,sa8775p-tcsr
- qcom,sc7180-tcsr
- qcom,sc7280-tcsr
- qcom,sc8280xp-tcsr
description:
The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
for fatal IRQs which will cause the PMIC to shut down power outputs.
- In many systems this will shut down the SoC contolling the PMIC and
+ In many systems this will shut down the SoC controlling the PMIC and
connecting/handling the errb can be omitted. However, there are cases
where the SoC is not powered by the PMIC or has a short time backup
energy to handle shutdown of critical hardware. In that case it may be
samsung,s2mps11-wrstbi-ground:
description: |
Indicates that WRSTBI pin of PMIC is pulled down. When the system is
- suspended it will always go down thus triggerring unwanted buck warm
+ suspended it will always go down thus triggering unwanted buck warm
reset (setting buck voltages to default values).
type: boolean
- rockchip,rk3368-qos
- rockchip,rk3399-qos
- rockchip,rk3568-qos
+ - rockchip,rk3576-qos
- rockchip,rk3588-qos
- rockchip,rv1126-qos
- st,spear1340-misc
- ti,am625-dss-oldi-io-ctrl
- ti,am62p-cpsw-mac-efuse
- ti,am654-dss-oldi-io-ctrl
+ - ti,j784s4-acspcie-proxy-ctrl
- ti,j784s4-pcie-ctrl
- ti,keystone-pllctrl
required:
- rockchip,rk3368-qos
- rockchip,rk3399-qos
- rockchip,rk3568-qos
+ - rockchip,rk3576-qos
- rockchip,rk3588-qos
- rockchip,rv1126-qos
- st,spear1340-misc
The TWL6040s are 8-channel high quality low-power audio codecs providing audio,
vibra and GPO functionality on OMAP4+ platforms.
-They are connected ot the host processor via i2c for commands, McPDM for audio
+They are connected to the host processor via i2c for commands, McPDM for audio
data and commands.
Required properties:
Defines the work frequency of DC-DC in kHz.
patternProperties:
- "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo)$":
+ "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo|boost)$":
$ref: /schemas/regulator/regulator.yaml#
type: object
unevaluatedProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/aspeed,ast2400-cvic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed Coprocessor Vectored Interrupt Controller
+
+maintainers:
+ - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+description:
+ The Aspeed AST2400 and AST2500 SoCs have a controller that provides interrupts
+ to the ColdFire coprocessor. It's not a normal interrupt controller and it
+ would be rather inconvenient to create an interrupt tree for it, as it
+ somewhat shares some of the same sources as the main ARM interrupt controller
+ but with different numbers.
+
+ The AST2500 also supports a software generated interrupt.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - aspeed,ast2400-cvic
+ - aspeed,ast2500-cvic
+ - const: aspeed,cvic
+
+ reg:
+ maxItems: 1
+
+ valid-sources:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 1
+ description:
+ A bitmap of supported sources for the implementation.
+
+ copro-sw-interrupts:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description:
+ A list of interrupt numbers that can be used as software interrupts from
+ the ARM to the coprocessor.
+
+required:
+ - compatible
+ - reg
+ - valid-sources
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@1e6c2000 {
+ compatible = "aspeed,ast2500-cvic", "aspeed,cvic";
+ reg = <0x1e6c2000 0x80>;
+ valid-sources = <0xffffffff>;
+ copro-sw-interrupts = <1>;
+ };
+++ /dev/null
-* ASPEED AST2400 and AST2500 coprocessor interrupt controller
-
-This file describes the bindings for the interrupt controller present
-in the AST2400 and AST2500 BMC SoCs which provides interrupt to the
-ColdFire coprocessor.
-
-It is not a normal interrupt controller and it would be rather
-inconvenient to create an interrupt tree for it as it somewhat shares
-some of the same sources as the main ARM interrupt controller but with
-different numbers.
-
-The AST2500 supports a SW generated interrupt
-
-Required properties:
-- reg: address and length of the register for the device.
-- compatible: "aspeed,cvic" and one of:
- "aspeed,ast2400-cvic"
- or
- "aspeed,ast2500-cvic"
-
-- valid-sources: One cell, bitmap of supported sources for the implementation
-
-Optional properties;
-- copro-sw-interrupts: List of interrupt numbers that can be used as
- SW interrupts from the ARM to the coprocessor.
- (AST2500 only)
-
-Example:
-
- cvic: copro-interrupt-controller@1e6c2000 {
- compatible = "aspeed,ast2500-cvic";
- valid-sources = <0xffffffff>;
- copro-sw-interrupts = <1>;
- reg = <0x1e6c2000 0x80>;
- };
msi-parent:
deprecated: true
- $ref: /schemas/types.yaml#/definitions/phandle
+ maxItems: 1
description:
Describes the MSI controller node handling message
interrupts for the MC. When there is no translation
- mdsp
- sdsp
- cdsp
+ - cdsp1
memory-region:
maxItems: 1
iommus:
minItems: 1
- maxItems: 3
+ maxItems: 10
qcom,nsessions:
$ref: /schemas/types.yaml#/definitions/uint32
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/atmel,sama5d2-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SDHCI controller
+
+maintainers:
+ - Aubin Constans <aubin.constans@microchip.com>
+ - Nicolas Ferre <nicolas.ferre@microchip.com>
+
+description:
+ Bindings for the SDHCI controller found in Atmel/Microchip SoCs.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - atmel,sama5d2-sdhci
+ - microchip,sam9x60-sdhci
+ - items:
+ - enum:
+ - microchip,sam9x7-sdhci
+ - microchip,sama7g5-sdhci
+ - const: microchip,sam9x60-sdhci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: hclock
+ - description: multclk
+ - description: baseclk
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: hclock
+ - const: multclk
+ - const: baseclk
+ minItems: 2
+
+ microchip,sdcal-inverted:
+ type: boolean
+ description:
+ When present, polarity on the SDCAL SoC pin is inverted. The default
+ polarity for this signal is described in the datasheet. For instance on
+ SAMA5D2, the pin is usually tied to the GND with a resistor and a
+ capacitor (see "SDMMC I/O Calibration" chapter).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: sdhci-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - atmel,sama5d2-sdhci
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ clock-names:
+ minItems: 3
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/at91.h>
+ mmc@a0000000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xa0000000 0x300>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ assigned-clocks = <&sdmmc0_gclk>;
+ assigned-clock-rates = <480000000>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/nuvoton,ma35d1-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 SD/SDIO/MMC Controller
+
+maintainers:
+ - Shan-Chun Hung <shanchun1218@gmail.com>
+
+allOf:
+ - $ref: sdhci-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,ma35d1-sdhci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: state_uhs
+
+ pinctrl-0:
+ description:
+ Should contain default/high speed pin ctrl.
+ maxItems: 1
+
+ pinctrl-1:
+ description:
+ Should contain uhs mode pin ctrl.
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ nuvoton,sys:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to access GCR (Global Control Register) registers.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - pinctrl-names
+ - pinctrl-0
+ - resets
+ - nuvoton,sys
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+ #include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ mmc@40190000 {
+ compatible = "nuvoton,ma35d1-sdhci";
+ reg = <0x0 0x40190000 0x0 0x2000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk SDH1_GATE>;
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&pinctrl_sdhci1>;
+ pinctrl-1 = <&pinctrl_sdhci1_uhs>;
+ resets = <&sys MA35D1_RESET_SDH1>;
+ nuvoton,sys = <&sys>;
+ vqmmc-supply = <&sdhci1_vqmmc_regulator>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ };
+ };
- renesas,sdhi-r7s9210 # SH-Mobile AG5
- renesas,sdhi-r8a73a4 # R-Mobile APE6
- renesas,sdhi-r8a7740 # R-Mobile A1
+ - renesas,sdhi-r9a09g057 # RZ/V2H(P)
- renesas,sdhi-sh73a0 # R-Mobile APE6
- items:
- enum:
minItems: 1
maxItems: 3
- clocks: true
+ clocks:
+ minItems: 1
+ maxItems: 4
- clock-names: true
+ clock-names:
+ minItems: 1
+ maxItems: 4
dmas:
minItems: 4
properties:
compatible:
contains:
- const: renesas,rzg2l-sdhi
+ enum:
+ - renesas,sdhi-r9a09g057
+ - renesas,rzg2l-sdhi
then:
properties:
clocks:
- rockchip,rv1108-dw-mshc
- rockchip,rv1126-dw-mshc
- const: rockchip,rk3288-dw-mshc
+ # for Rockchip RK3576 with phase tuning inside the controller
+ - const: rockchip,rk3576-dw-mshc
reg:
maxItems: 1
+++ /dev/null
-* Atmel SDHCI controller
-
-This file documents the differences between the core properties in
-Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the
-sdhci-of-at91 driver.
-
-Required properties:
-- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci"
- or "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci".
-- clocks: Phandlers to the clocks.
-- clock-names: Must be "hclock", "multclk", "baseclk" for
- "atmel,sama5d2-sdhci".
- Must be "hclock", "multclk" for "microchip,sam9x60-sdhci".
- Must be "hclock", "multclk" for "microchip,sam9x7-sdhci".
-
-Optional properties:
-- assigned-clocks: The same with "multclk".
-- assigned-clock-rates The rate of "multclk" in order to not rely on the
- gck configuration set by previous components.
-- microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is
- inverted. The default polarity for this signal is described in the datasheet.
- For instance on SAMA5D2, the pin is usually tied to the GND with a resistor
- and a capacitor (see "SDMMC I/O Calibration" chapter).
-
-Example:
-
-mmc0: sdio-host@a0000000 {
- compatible = "atmel,sama5d2-sdhci";
- reg = <0xa0000000 0x300>;
- interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
- clock-names = "hclock", "multclk", "baseclk";
- assigned-clocks = <&sdmmc0_gclk>;
- assigned-clock-rates = <480000000>;
-};
- Ulf Hansson <ulf.hansson@linaro.org>
- Jisheng Zhang <Jisheng.Zhang@synaptics.com>
-allOf:
- - $ref: mmc-controller.yaml#
-
properties:
compatible:
- enum:
- - rockchip,rk3568-dwcmshc
- - rockchip,rk3588-dwcmshc
- - snps,dwcmshc-sdhci
- - sophgo,cv1800b-dwcmshc
- - sophgo,sg2002-dwcmshc
- - thead,th1520-dwcmshc
+ oneOf:
+ - items:
+ - const: rockchip,rk3576-dwcmshc
+ - const: rockchip,rk3588-dwcmshc
+ - enum:
+ - rockchip,rk3568-dwcmshc
+ - rockchip,rk3588-dwcmshc
+ - snps,dwcmshc-sdhci
+ - sophgo,cv1800b-dwcmshc
+ - sophgo,sg2002-dwcmshc
+ - sophgo,sg2042-dwcmshc
+ - thead,th1520-dwcmshc
reg:
maxItems: 1
clocks:
minItems: 1
- items:
- - description: core clock
- - description: bus clock for optional
- - description: axi clock for rockchip specified
- - description: block clock for rockchip specified
- - description: timer clock for rockchip specified
-
+ maxItems: 5
clock-names:
minItems: 1
- items:
- - const: core
- - const: bus
- - const: axi
- - const: block
- - const: timer
+ maxItems: 5
+
+ power-domains:
+ maxItems: 1
resets:
maxItems: 5
description: Specify the number of delay for tx sampling.
$ref: /schemas/types.yaml#/definitions/uint8
-
required:
- compatible
- reg
- clocks
- clock-names
+allOf:
+ - $ref: mmc-controller.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: sophgo,sg2042-dwcmshc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: core clock
+ - description: bus clock
+ - description: timer clock
+ clock-names:
+ items:
+ - const: core
+ - const: bus
+ - const: timer
+ else:
+ properties:
+ clocks:
+ minItems: 1
+ items:
+ - description: core clock
+ - description: bus clock for optional
+ - description: axi clock for rockchip specified
+ - description: block clock for rockchip specified
+ - description: timer clock for rockchip specified
+ clock-names:
+ minItems: 1
+ items:
+ - const: core
+ - const: bus
+ - const: axi
+ - const: block
+ - const: timer
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3576-dwcmshc
+
+ then:
+ required:
+ - power-domains
+
+ else:
+ properties:
+ power-domains: false
+
unevaluatedProperties: false
examples:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/technologic,nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Technologic Systems NAND controller
+
+maintainers:
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: nand-controller.yaml
+
+properties:
+ compatible:
+ oneOf:
+ - const: technologic,ts7200-nand
+ - items:
+ - enum:
+ - technologic,ts7300-nand
+ - technologic,ts7260-nand
+ - technologic,ts7250-nand
+ - const: technologic,ts7200-nand
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ nand-controller@60000000 {
+ compatible = "technologic,ts7200-nand";
+ reg = <0x60000000 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ nand@0 {
+ reg = <0>;
+ };
+ };
GPIO connection to R/B signal from NAND chip
maxItems: 1
-patternProperties:
- "@[0-9a-f]+$":
- $ref: /schemas/mtd/partitions/partition.yaml
-
allOf:
- $ref: /schemas/memory-controllers/ti,gpmc-child.yaml
+ - $ref: mtd.yaml#
required:
- compatible
- const: timing-adjustment
amlogic,tx-delay-ns:
- $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 2, 4, 6]
+ default: 2
description:
- The internal RGMII TX clock delay (provided by this driver) in
- nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns.
- When phy-mode is set to "rgmii" then the TX delay should be
- explicitly configured. When not configured a fallback of 2ns is
- used. When the phy-mode is set to either "rgmii-id" or "rgmii-txid"
- the TX clock delay is already provided by the PHY. In that case
- this property should be set to 0ns (which disables the TX clock
- delay in the MAC to prevent the clock from going off because both
- PHY and MAC are adding a delay).
- Any configuration is ignored when the phy-mode is set to "rmii".
+ The internal RGMII TX clock delay (provided by this driver)
+ in nanoseconds. When phy-mode is set to "rgmii" then the TX
+ delay should be explicitly configured. When the phy-mode is
+ set to either "rgmii-id" or "rgmii-txid" the TX clock delay
+ is already provided by the PHY. In that case this property
+ should be set to 0ns (which disables the TX clock delay in
+ the MAC to prevent the clock from going off because both
+ PHY and MAC are adding a delay). Any configuration is
+ ignored when the phy-mode is set to "rmii".
amlogic,rx-delay-ns:
deprecated: true
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/amlogic,w155s2-bt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Bluetooth chips
+
+description:
+ The W155S2 is an Amlogic Bluetooth and Wi-Fi combo chip. It works on
+ the standard H4 protocol via a 4-wire UART interface, with baud rates
+ up to 4 Mbps.
+
+maintainers:
+ - Yang Li <yang.li@amlogic.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,w265s1-bt
+ - amlogic,w265p1-bt
+ - const: amlogic,w155s2-bt
+ - enum:
+ - amlogic,w155s2-bt
+ - amlogic,w265s2-bt
+
+ clocks:
+ maxItems: 1
+ description: clock provided to the controller (32.768KHz)
+
+ enable-gpios:
+ maxItems: 1
+
+ vddio-supply:
+ description: VDD_IO supply regulator handle
+
+ firmware-name:
+ maxItems: 1
+ description: specify the path of firmware bin to load
+
+required:
+ - compatible
+ - clocks
+ - enable-gpios
+ - vddio-supply
+ - firmware-name
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ bluetooth {
+ compatible = "amlogic,w155s2-bt";
+ clocks = <&extclk>;
+ enable-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ vddio-supply = <&wcn_3v3>;
+ firmware-name = "amlogic/aml_w155s2_bt_uart.bin";
+ };
+
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/net/broadcom-bluetooth.yaml#
+$id: http://devicetree.org/schemas/net/bluetooth/brcm,bluetooth.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom Bluetooth Chips
items:
- const: host-wakeup
- max-speed: true
- current-speed: true
-
required:
- compatible
dependencies:
brcm,requires-autobaud-mode: [ shutdown-gpios ]
-if:
- not:
- properties:
- compatible:
- contains:
- enum:
- - brcm,bcm20702a1
- - brcm,bcm4329-bt
- - brcm,bcm4330-bt
-then:
- properties:
- reset-gpios: false
-
-additionalProperties: false
+allOf:
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,bcm20702a1
+ - brcm,bcm4329-bt
+ - brcm,bcm4330-bt
+ then:
+ properties:
+ reset-gpios: false
+
+unevaluatedProperties: false
examples:
- |
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/net/marvell-bluetooth.yaml#
+$id: http://devicetree.org/schemas/net/bluetooth/marvell,88w8897.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Marvell Bluetooth chips
- mrvl,88w8897
- mrvl,88w8997
- max-speed:
- description: see Documentation/devicetree/bindings/serial/serial.yaml
+ max-speed: true
required:
- compatible
allOf:
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
- if:
properties:
compatible:
description: VDD_RFA_CMN supply regulator handle
vddrfa0p8-supply:
- description: VDD_RFA_0P8 suppply regulator handle
+ description: VDD_RFA_0P8 supply regulator handle
vddrfa1p7-supply:
description: VDD_RFA_1P7 supply regulator handle
vddwlmx-supply:
description: VDD_WLMX supply regulator handle
- max-speed:
- description: see Documentation/devicetree/bindings/serial/serial.yaml
+ max-speed: true
firmware-name:
description: specify the name of nvm firmware to load
allOf:
- $ref: bluetooth-controller.yaml#
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
- if:
properties:
compatible:
- qcom,wcn6855-bt
then:
required:
- - enable-gpios
- - swctrl-gpios
- - vddio-supply
- - vddbtcxmx-supply
- vddrfacmn-supply
+ - vddaon-supply
+ - vddwlcx-supply
+ - vddwlmx-supply
+ - vddbtcmx-supply
- vddrfa0p8-supply
- vddrfa1p2-supply
- - vddrfa1p7-supply
+ - vddrfa1p8-supply
- if:
properties:
compatible:
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml#
+$id: http://devicetree.org/schemas/net/bluetooth/realtek,bluetooth.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS Bluetooth
required:
- compatible
+allOf:
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
additionalProperties: false
examples:
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/net/ti,bluetooth.yaml#
+$id: http://devicetree.org/schemas/net/bluetooth/ti,bluetooth.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments Bluetooth Chips
required:
- compatible
+allOf:
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
additionalProperties: false
examples:
- brcm,asp-v2.1-mdio
- brcm,asp-v2.2-mdio
- brcm,unimac-mdio
+ - brcm,bcm6846-mdio
reg:
minItems: 1
compatible:
oneOf:
- enum:
+ - fsl,imx95-flexcan
- fsl,imx93-flexcan
- fsl,imx8qm-flexcan
- fsl,imx8mp-flexcan
- fsl,imx6ul-flexcan
- fsl,imx6sx-flexcan
- const: fsl,imx6q-flexcan
- - items:
- - const: fsl,imx95-flexcan
- - const: fsl,imx93-flexcan
- items:
- enum:
- fsl,ls1028ar1-flexcan
node then controller is assumed to be little endian. If this property is
present then controller is assumed to be big endian.
+ can-transceiver:
+ $ref: can-transceiver.yaml#
+ unevaluatedProperties: false
+
fsl,stop-mode:
description: |
Register bits of stop mode control.
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/can/microchip,mcp2510.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP251X stand-alone CAN controller
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+ compatible:
+ enum:
+ - microchip,mcp2510
+ - microchip,mcp2515
+ - microchip,mcp25625
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator that powers the CAN controller.
+
+ xceiver-supply:
+ description: Regulator that powers the CAN transceiver.
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ can@1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk24m>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <®5v0>;
+ xceiver-supply = <®5v0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+++ /dev/null
-* Microchip MCP251X stand-alone CAN controller device tree bindings
-
-Required properties:
- - compatible: Should be one of the following:
- - "microchip,mcp2510" for MCP2510.
- - "microchip,mcp2515" for MCP2515.
- - "microchip,mcp25625" for MCP25625.
- - reg: SPI chip select.
- - clocks: The clock feeding the CAN controller.
- - interrupts: Should contain IRQ line for the CAN controller.
-
-Optional properties:
- - vdd-supply: Regulator that powers the CAN controller.
- - xceiver-supply: Regulator that powers the CAN transceiver.
- - gpio-controller: Indicates this device is a GPIO controller.
- - #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity.
-
-Example:
- can0: can@1 {
- compatible = "microchip,mcp2515";
- reg = <1>;
- clocks = <&clk24m>;
- interrupt-parent = <&gpio4>;
- interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <®5v0>;
- xceiver-supply = <®5v0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
- enum:
- renesas,r8a779a0-canfd # R-Car V3U
- renesas,r8a779g0-canfd # R-Car V4H
+ - renesas,r8a779h0-canfd # R-Car V4M
- const: renesas,rcar-gen4-canfd # R-Car Gen4
- items:
maxItems: 1
- if:
- not:
- properties:
- compatible:
- contains:
- const: renesas,rcar-gen4-canfd
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a779h0-canfd
then:
patternProperties:
- "^channel[2-7]$": false
+ "^channel[5-7]$": false
+ else:
+ if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: renesas,rcar-gen4-canfd
+ then:
+ patternProperties:
+ "^channel[2-7]$": false
unevaluatedProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/rockchip,rk3568v2-canfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Rockchip CAN-FD controller
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3568v2-canfd
+ - items:
+ - const: rockchip,rk3568v3-canfd
+ - const: rockchip,rk3568v2-canfd
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: baud
+ - const: pclk
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: core
+ - const: apb
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3568-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ can@fe570000 {
+ compatible = "rockchip,rk3568v2-canfd";
+ reg = <0x0 0xfe570000 0x0 0x1000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_CAN0>, <&cru PCLK_CAN0>;
+ clock-names = "baud", "pclk";
+ resets = <&cru SRST_CAN0>, <&cru SRST_P_CAN0>;
+ reset-names = "core", "apb";
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cirrus,ep9301-eth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx SoC Ethernet Controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-eth
+ - items:
+ - enum:
+ - cirrus,ep9302-eth
+ - cirrus,ep9307-eth
+ - cirrus,ep9312-eth
+ - cirrus,ep9315-eth
+ - const: cirrus,ep9301-eth
+
+ reg:
+ items:
+ - description: The physical base address and size of IO range
+
+ interrupts:
+ items:
+ - description: Combined signal for various interrupt events
+
+ phy-handle: true
+
+ mdio:
+ $ref: mdio.yaml#
+ unevaluatedProperties: false
+ description: optional node for embedded MDIO controller
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - phy-handle
+
+additionalProperties: false
+
+examples:
+ - |
+ ethernet@80010000 {
+ compatible = "cirrus,ep9301-eth";
+ reg = <0x80010000 0x10000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <7>;
+ phy-handle = <&phy0>;
+ };
Built-in switch of the MT7988 SoC
const: mediatek,mt7988-switch
+ - description:
+ Built-in switch of the Airoha EN7581 SoC
+ const: airoha,en7581-switch
+
reg:
maxItems: 1
- if:
properties:
compatible:
- const: mediatek,mt7988-switch
+ enum:
+ - mediatek,mt7988-switch
+ - airoha,en7581-switch
then:
$ref: "#/$defs/mt7530-dsa-port"
properties:
- microchip,ksz8794
- microchip,ksz8795
- microchip,ksz8863
+ - microchip,ksz8864 # 4-port version of KSZ8895 family switch
- microchip,ksz8873
+ - microchip,ksz8895 # 5-port version of KSZ8895 family switch
- microchip,ksz9477
- microchip,ksz9897
- microchip,ksz9896
Set if the output SYNCLKO clock should be disabled. Do not mix with
microchip,synclko-125.
+ microchip,pme-active-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates if the PME pin polarity is active-high.
+
microchip,io-drive-strength-microamp:
description:
IO Pad Drive Strength
allOf:
- $ref: dsa.yaml#/$defs/ethernet-ports
+patternProperties:
+ "^(ethernet-)?ports$":
+ additionalProperties: true
+ patternProperties:
+ "^(ethernet-)?port@6$":
+ allOf:
+ - if:
+ properties:
+ phy-mode:
+ contains:
+ enum:
+ - rgmii
+ then:
+ properties:
+ rx-internal-delay-ps:
+ $ref: "#/$defs/internal-delay-ps"
+ tx-internal-delay-ps:
+ $ref: "#/$defs/internal-delay-ps"
+
# This checks if reg is a chipselect so the device is on an SPI
# bus, the if-clause will fail if reg is a tuple such as for a
# platform device.
- compatible
- reg
+$defs:
+ internal-delay-ps:
+ description:
+ Disable tunable delay lines using 0 ps, or enable them and select
+ the phase between 1400 ps and 2000 ps in increments of 300 ps.
+ default: 2000
+ enum:
+ [0, 1400, 1700, 2000]
+
unevaluatedProperties: false
examples:
reg = <6>;
ethernet = <&gmac1>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
fixed-link {
speed = <1000>;
full-duplex;
ethernet-port@6 {
reg = <6>;
ethernet = <&enet0>;
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,cpm-enet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Network for cpm enet
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,cpm1-scc-enet
+ - fsl,cpm2-scc-enet
+ - fsl,cpm1-fec-enet
+ - fsl,cpm2-fcc-enet
+ - fsl,qe-enet
+ - items:
+ - enum:
+ - fsl,mpc8272-fcc-enet
+ - const: fsl,cpm2-fcc-enet
+
+ reg:
+ minItems: 1
+ maxItems: 3
+
+ interrupts:
+ maxItems: 1
+
+ fsl,cpm-command:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: cpm command
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet@11300 {
+ compatible = "fsl,mpc8272-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <20 8>;
+ interrupt-parent = <&pic>;
+ phy-handle = <&phy0>;
+ fsl,cpm-command = <0x12000300>;
+ };
+
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,cpm-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale CPM MDIO Device
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,pq1-fec-mdio
+ - fsl,cpm2-mdio-bitbang
+ - items:
+ - const: fsl,mpc8272ads-mdio-bitbang
+ - const: fsl,mpc8272-mdio-bitbang
+ - const: fsl,cpm2-mdio-bitbang
+
+ reg:
+ maxItems: 1
+
+ fsl,mdio-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: pin of port C controlling mdio data
+
+ fsl,mdc-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: pin of port C controlling mdio clock
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: mdio.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mdio@10d40 {
+ compatible = "fsl,mpc8272ads-mdio-bitbang",
+ "fsl,mpc8272-mdio-bitbang",
+ "fsl,cpm2-mdio-bitbang";
+ reg = <0x10d40 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fsl,mdio-pin = <12>;
+ fsl,mdc-pin = <13>;
+ };
+
maxItems: 1
description: The DPMAC number
- phy-handle: true
-
- phy-connection-type: true
-
- phy-mode: true
-
pcs-handle:
maxItems: 1
description:
A reference to a node representing a PCS PHY device found on
the internal MDIO bus.
- managed: true
-
phys:
description: A reference to the SerDes lane(s)
maxItems: 1
required:
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
+++ /dev/null
-* Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver
-
-Required properties:
-- compatible: Should contain "maxim,ds26522".
-- reg: SPI CS.
-- spi-max-frequency: SPI clock.
-
-Example:
- slic@1 {
- compatible = "maxim,ds26522";
- reg = <1>;
- spi-max-frequency = <2000000>; /* input clock */
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/maxim,ds26522.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ items:
+ - const: maxim,ds26522
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ transceiver@1 {
+ compatible = "maxim,ds26522";
+ reg = <1>;
+ spi-max-frequency = <2000000>; /* input clock */
+ };
+ };
properties:
$nodename:
- pattern: "^mdio(@.*)?"
+ pattern: '^mdio(-(bus|external))?(@.+|-([0-9]+))?$'
"#address-cells":
const: 1
reg:
maxItems: 1
- clocks: true
- clock-names: true
+ clocks:
+ minItems: 2
+ maxItems: 24
+
+ clock-names:
+ minItems: 2
+ maxItems: 24
interrupts:
minItems: 1
then:
properties:
interrupts:
+ minItems: 3
maxItems: 3
clocks:
then:
properties:
interrupts:
+ minItems: 3
maxItems: 3
clocks:
then:
properties:
interrupts:
+ minItems: 3
maxItems: 3
clocks:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan8650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN8650/1 10BASE-T1S MACPHY Ethernet Controllers
+
+maintainers:
+ - Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
+
+description:
+ The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet
+ PHY to enable 10BASE‑T1S networks. The Ethernet Media Access Controller
+ (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible
+ with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver
+ integrated into the LAN8650/1. The communication between the Host and
+ the MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial
+ Interface (TC6).
+
+allOf:
+ - $ref: /schemas/net/ethernet-controller.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: microchip,lan8650
+ - items:
+ - const: microchip,lan8651
+ - const: microchip,lan8650
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Interrupt from MAC-PHY asserted in the event of Receive Chunks
+ Available, Transmit Chunk Credits Available and Extended Status
+ Event.
+ maxItems: 1
+
+ spi-max-frequency:
+ minimum: 15000000
+ maximum: 25000000
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "microchip,lan8651", "microchip,lan8650";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð0_pins>;
+ interrupt-parent = <&gpio>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ local-mac-address = [04 05 06 01 02 03];
+ spi-max-frequency = <15000000>;
+ };
+ };
'#pse-cells':
const: 1
+ reset-gpios:
+ maxItems: 1
+
channels:
description: each set of 8 ports can be assigned to one physical
channels or two for PoE4. This parameter describes the configuration
- renesas,r9a08g045-gbeth # RZ/G3S
- const: renesas,rzg2l-gbeth # RZ/{G2L,G2UL,V2L} family
- reg: true
+ reg:
+ minItems: 1
+ items:
+ - description: MAC register block
+ - description: Stream buffer
- interrupts: true
+ interrupts:
+ minItems: 1
+ maxItems: 29
- interrupt-names: true
+ interrupt-names:
+ minItems: 1
+ maxItems: 29
- clocks: true
+ clocks:
+ minItems: 1
+ maxItems: 3
- clock-names: true
+ clock-names:
+ minItems: 1
+ maxItems: 3
iommus:
maxItems: 1
then:
properties:
reg:
- items:
- - description: MAC register block
- - description: Stream buffer
+ minItems: 2
else:
properties:
reg:
- items:
- - description: MAC register block
+ maxItems: 1
- if:
properties:
- rockchip,rk3368-gmac
- rockchip,rk3399-gmac
- rockchip,rk3568-gmac
+ - rockchip,rk3576-gmac
- rockchip,rk3588-gmac
- rockchip,rv1108-gmac
- rockchip,rv1126-gmac
- items:
- enum:
- rockchip,rk3568-gmac
+ - rockchip,rk3576-gmac
- rockchip,rk3588-gmac
- rockchip,rv1126-gmac
- const: snps,dwmac-4.20a
- rockchip,rk3328-gmac
- rockchip,rk3366-gmac
- rockchip,rk3368-gmac
+ - rockchip,rk3576-gmac
- rockchip,rk3588-gmac
- rockchip,rk3399-gmac
- rockchip,rv1108-gmac
minItems: 1
maxItems: 4
- clock-names: true
+ clock-names:
+ minItems: 1
+ maxItems: 4
resets:
minItems: 1
maxItems: 2
- reset-names: true
+ reset-names:
+ minItems: 1
+ maxItems: 2
socionext,syscon-phy-mode:
$ref: /schemas/types.yaml#/definitions/phandle-array
reset-gpios:
maxItems: 1
+ bootloader-backdoor-gpios:
+ maxItems: 1
+ description: |
+ gpios to enable bootloader backdoor in cc1352p7 bootloader to allow
+ flashing new firmware.
+
vdds-supply: true
required:
clocks = <&sclk_hf 0>, <&sclk_lf 25>;
clock-names = "sclk_hf", "sclk_lf";
reset-gpios = <&pio 35 GPIO_ACTIVE_LOW>;
+ bootloader-backdoor-gpios = <&pio 36 GPIO_ACTIVE_LOW>;
vdds-supply = <&vdds>;
};
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/marvell,sd8787.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices
+
+maintainers:
+ - Brian Norris <briannorris@chromium.org>
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ This node provides properties for describing the Marvell SDIO/PCIE wireless device.
+ The node is expected to be specified as a child node to the SDIO/PCIE controller that
+ connects the device to the system.
+
+properties:
+ compatible:
+ enum:
+ - marvell,sd8787
+ - marvell,sd8897
+ - marvell,sd8978
+ - marvell,sd8997
+ - nxp,iw416
+ - pci11ab,2b42
+ - pci1b4b,2b42
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source: true
+
+ marvell,caldata-txpwrlimit-2g:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: Calibration data for the 2GHz band.
+ maxItems: 566
+
+ marvell,caldata-txpwrlimit-5g-sub0:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: Calibration data for sub-band 0 in the 5GHz band.
+ maxItems: 502
+
+ marvell,caldata-txpwrlimit-5g-sub1:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: Calibration data for sub-band 1 in the 5GHz band.
+ maxItems: 688
+
+ marvell,caldata-txpwrlimit-5g-sub2:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: Calibration data for sub-band 2 in the 5GHz band.
+ maxItems: 750
+
+ marvell,caldata-txpwrlimit-5g-sub3:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: Calibration data for sub-band 3 in the 5GHz band.
+ maxItems: 502
+
+ marvell,wakeup-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Provides the pin number for the wakeup pin from the device's point of
+ view. The wakeup pin is used for the device to wake the host system
+ from sleep. This property is only necessary if the wakeup pin is
+ wired in a non-standard way, such that the default pin assignments
+ are invalid.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ mmc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "marvell,sd8897";
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+ marvell,wakeup-pin = <3>;
+ };
+ };
+
+++ /dev/null
-Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices
-------
-
-This node provides properties for controlling the Marvell SDIO/PCIE wireless device.
-The node is expected to be specified as a child node to the SDIO/PCIE controller that
-connects the device to the system.
-
-Required properties:
-
- - compatible : should be one of the following:
- * "marvell,sd8787"
- * "marvell,sd8897"
- * "marvell,sd8978"
- * "marvell,sd8997"
- * "nxp,iw416"
- * "pci11ab,2b42"
- * "pci1b4b,2b42"
-
-Optional properties:
-
- - marvell,caldata* : A series of properties with marvell,caldata prefix,
- represent calibration data downloaded to the device during
- initialization. This is an array of unsigned 8-bit values.
- the properties should follow below property name and
- corresponding array length:
- "marvell,caldata-txpwrlimit-2g" (length = 566).
- "marvell,caldata-txpwrlimit-5g-sub0" (length = 502).
- "marvell,caldata-txpwrlimit-5g-sub1" (length = 688).
- "marvell,caldata-txpwrlimit-5g-sub2" (length = 750).
- "marvell,caldata-txpwrlimit-5g-sub3" (length = 502).
- - marvell,wakeup-pin : a wakeup pin number of wifi chip which will be configured
- to firmware. Firmware will wakeup the host using this pin
- during suspend/resume.
- - interrupts : interrupt pin number to the cpu. driver will request an irq based on
- this interrupt number. during system suspend, the irq will be enabled
- so that the wifi chip can wakeup host platform under certain condition.
- during system resume, the irq will be disabled to make sure
- unnecessary interrupt is not received.
- - vmmc-supply: a phandle of a regulator, supplying VCC to the card
- - mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*"
- for documentation of MMC power sequence bindings.
-
-Example:
-
-Tx power limit calibration data is configured in below example.
-The calibration data is an array of unsigned values, the length
-can vary between hw versions.
-IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured
-so that firmware can wakeup host using this device side pin.
-
-&mmc3 {
- vmmc-supply = <&wlan_en_reg>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- cap-power-off-card;
- keep-power-in-suspend;
-
- #address-cells = <1>;
- #size-cells = <0>;
- mwifiex: wifi@1 {
- compatible = "marvell,sd8897";
- reg = <1>;
- interrupt-parent = <&pio>;
- interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
-
- marvell,caldata_00_txpwrlimit_2g_cfg_set = /bits/ 8 <
- 0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01>;
- marvell,wakeup-pin = <3>;
- };
-};
and length of the AXI DMA controller IO space, unless
axistream-connected is specified, in which case the reg
attribute of the node referenced by it is used.
+ minItems: 1
maxItems: 2
interrupts:
- gmii
- rgmii
- sgmii
- - 1000BaseX
+ - 1000base-x
xlnx,phy-type:
description:
clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
phy-mode = "mii";
- reg = <0x00 0x40000000 0x00 0x40000>;
+ reg = <0x40000000 0x40000>;
xlnx,rxcsum = <0x2>;
xlnx,rxmem = <0x800>;
xlnx,txcsum = <0x2>;
allOf:
- $ref: nvmem.yaml#
+ - $ref: nvmem-deprecated-cells.yaml
properties:
compatible:
description: |
This binding represents the on-chip eFuse OTP controller found on
i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
- i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93 SoCs.
+ i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93/5 SoCs.
allOf:
- $ref: nvmem.yaml#
- fsl,imx8mq-ocotp
- fsl,imx8mm-ocotp
- fsl,imx93-ocotp
+ - fsl,imx95-ocotp
- const: syscon
- items:
- enum:
- $ref: fixed-layout.yaml
- $ref: kontron,sl28-vpd.yaml
- $ref: onie,tlv-layout.yaml
+ - $ref: u-boot,env.yaml
properties:
compatible: true
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
-$id: http://devicetree.org/schemas/nvmem/u-boot,env.yaml#
+$id: http://devicetree.org/schemas/nvmem/layouts/u-boot,env.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: U-Boot environment variables
+title: U-Boot environment variables layout
description: |
U-Boot uses environment variables to store device parameters and
This binding allows marking storage device (as containing env data) and
specifying used format.
- Right now only flash partition case is covered but it may be extended to e.g.
- UBI volumes in the future.
-
Variables can be defined as NVMEM device subnodes.
maintainers:
const: brcm,env
reg:
+ description: Partition offset and size for env on top of MTD
maxItems: 1
bootcmd:
description: The first argument is a MAC address offset.
const: 1
+allOf:
+ - if:
+ properties:
+ $nodename:
+ not:
+ contains:
+ pattern: "^partition@[0-9a-f]+$"
+ then:
+ properties:
+ reg: false
+
additionalProperties: false
examples:
};
};
};
+ - |
+ partition@0 {
+ reg = <0x0 0x100000>;
+ label = "ubi";
+ compatible = "linux,ubi";
+
+ volumes {
+ ubi-volume-u-boot-env {
+ volname = "env";
+
+ nvmem-layout {
+ compatible = "u-boot,env";
+
+ ethaddr {
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+ };
+ };
allOf:
- $ref: nvmem.yaml#
+ - $ref: nvmem-deprecated-cells.yaml#
properties:
compatible:
patternProperties:
"^.*@[0-9a-f]+$":
type: object
+ $ref: layouts/fixed-cell.yaml
+ unevaluatedProperties: false
properties:
st,non-secure-otp:
the hardware description for the scheme mentioned above.
maintainers:
- - Nishanth Menon <nm@ti.com>
+ - Dhruva Gole <d-gole@ti.com>
allOf:
- $ref: opp-v2-base.yaml#
+++ /dev/null
-* Altera PCIe MSI controller
-
-Required properties:
-- compatible: should contain "altr,msi-1.0"
-- reg: specifies the physical base address of the controller and
- the length of the memory mapped region.
-- reg-names: must include the following entries:
- "csr": CSR registers
- "vector_slave": vectors slave port region
-- interrupts: specifies the interrupt source of the parent interrupt
- controller. The format of the interrupt specifier depends on the
- parent interrupt controller.
-- num-vectors: number of vectors, range 1 to 32.
-- msi-controller: indicates that this is MSI controller node
-
-
-Example
-msi0: msi@0xFF200000 {
- compatible = "altr,msi-1.0";
- reg = <0xFF200000 0x00000010
- 0xFF200010 0x00000080>;
- reg-names = "csr", "vector_slave";
- interrupt-parent = <&hps_0_arm_gic_0>;
- interrupts = <0 42 4>;
- msi-controller;
- num-vectors = <32>;
-};
+++ /dev/null
-* Altera PCIe controller
-
-Required properties:
-- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0"
-- reg: a list of physical base address and length for TXS and CRA.
- For "altr,pcie-root-port-2.0", additional HIP base address and length.
-- reg-names: must include the following entries:
- "Txs": TX slave port region
- "Cra": Control register access region
- "Hip": Hard IP region (if "altr,pcie-root-port-2.0")
-- interrupts: specifies the interrupt source of the parent interrupt
- controller. The format of the interrupt specifier depends
- on the parent interrupt controller.
-- device_type: must be "pci"
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- #interrupt-cells: set to <1>
-- ranges: describes the translation of addresses for root ports and
- standard PCI regions.
-- interrupt-map-mask and interrupt-map: standard PCI properties to define the
- mapping of the PCIe interface to interrupt numbers.
-
-Optional properties:
-- msi-parent: Link to the hardware entity that serves as the MSI controller
- for this PCIe controller.
-- bus-range: PCI bus numbers covered
-
-Example
- pcie_0: pcie@c00000000 {
- compatible = "altr,pcie-root-port-1.0";
- reg = <0xc0000000 0x20000000>,
- <0xff220000 0x00004000>;
- reg-names = "Txs", "Cra";
- interrupt-parent = <&hps_0_arm_gic_0>;
- interrupts = <0 40 4>;
- interrupt-controller;
- #interrupt-cells = <1>;
- bus-range = <0x0 0xFF>;
- device_type = "pci";
- msi-parent = <&msi_to_gic_gen_0>;
- #address-cells = <3>;
- #size-cells = <2>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_0 1>,
- <0 0 0 2 &pcie_0 2>,
- <0 0 0 3 &pcie_0 3>,
- <0 0 0 4 &pcie_0 4>;
- ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
- 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2015, 2024, Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/altr,msi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera PCIe MSI controller
+
+maintainers:
+ - Matthew Gerlach <matthew.gerlach@linux.intel.com>
+
+properties:
+ compatible:
+ enum:
+ - altr,msi-1.0
+
+ reg:
+ items:
+ - description: CSR registers
+ - description: Vectors slave port region
+
+ reg-names:
+ items:
+ - const: csr
+ - const: vector_slave
+
+ interrupts:
+ maxItems: 1
+
+ msi-controller: true
+
+ num-vectors:
+ description: number of vectors
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - msi-controller
+ - num-vectors
+
+allOf:
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ msi@ff200000 {
+ compatible = "altr,msi-1.0";
+ reg = <0xff200000 0x00000010>,
+ <0xff200010 0x00000080>;
+ reg-names = "csr", "vector_slave";
+ interrupt-parent = <&hps_0_arm_gic_0>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ msi-controller;
+ num-vectors = <32>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2015, 2019, 2024, Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/altr,pcie-root-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera PCIe Root Port
+
+maintainers:
+ - Matthew Gerlach <matthew.gerlach@linux.intel.com>
+
+properties:
+ compatible:
+ enum:
+ - altr,pcie-root-port-1.0
+ - altr,pcie-root-port-2.0
+
+ reg:
+ items:
+ - description: TX slave port region
+ - description: Control register access region
+ - description: Hard IP region
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: Txs
+ - const: Cra
+ - const: Hip
+ minItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ interrupt-map-mask:
+ items:
+ - const: 0
+ - const: 0
+ - const: 0
+ - const: 7
+
+ interrupt-map:
+ maxItems: 4
+
+ "#interrupt-cells":
+ const: 1
+
+ msi-parent: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - "#interrupt-cells"
+ - interrupt-controller
+ - interrupt-map
+ - interrupt-map-mask
+
+allOf:
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - altr,pcie-root-port-1.0
+ then:
+ properties:
+ reg:
+ maxItems: 2
+
+ reg-names:
+ maxItems: 2
+
+ else:
+ properties:
+ reg:
+ minItems: 3
+
+ reg-names:
+ minItems: 3
+
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pcie_0: pcie@c00000000 {
+ compatible = "altr,pcie-root-port-1.0";
+ reg = <0xc0000000 0x20000000>,
+ <0xff220000 0x00004000>;
+ reg-names = "Txs", "Cra";
+ interrupt-parent = <&hps_0_arm_gic_0>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ bus-range = <0x0 0xff>;
+ device_type = "pci";
+ msi-parent = <&msi_to_gic_gen_0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_0 0 0 0 1>,
+ <0 0 0 2 &pcie_0 0 0 0 2>,
+ <0 0 0 3 &pcie_0 0 0 0 3>,
+ <0 0 0 4 &pcie_0 0 0 0 4>;
+ ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000>,
+ <0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
+ };
title: Brcmstb PCIe Host Controller
maintainers:
- - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ - Jim Quinlan <james.quinlan@broadcom.com>
properties:
compatible:
- brcm,bcm2711-pcie # The Raspberry Pi 4
- brcm,bcm4908-pcie
- brcm,bcm7211-pcie # Broadcom STB version of RPi4
- - brcm,bcm7278-pcie # Broadcom 7278 Arm
- brcm,bcm7216-pcie # Broadcom 7216 Arm
- - brcm,bcm7445-pcie # Broadcom 7445 Arm
+ - brcm,bcm7278-pcie # Broadcom 7278 Arm
- brcm,bcm7425-pcie # Broadcom 7425 MIPs
- brcm,bcm7435-pcie # Broadcom 7435 MIPs
+ - brcm,bcm7445-pcie # Broadcom 7445 Arm
+ - brcm,bcm7712-pcie # Broadcom STB sibling of Rpi 5
reg:
maxItems: 1
minItems: 1
maxItems: 3
+ resets:
+ minItems: 1
+ maxItems: 3
+
+ reset-names:
+ minItems: 1
+ maxItems: 3
+
required:
- compatible
- reg
then:
properties:
resets:
- items:
- - description: reset controller handling the PERST# signal
+ maxItems: 1
reset-names:
items:
then:
properties:
resets:
+ maxItems: 1
+
+ reset-names:
items:
- - description: phandle pointing to the RESCAL reset controller
+ - const: rescal
+
+ required:
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm7712-pcie
+ then:
+ properties:
+ resets:
+ minItems: 3
+ maxItems: 3
reset-names:
items:
- const: rescal
+ - const: bridge
+ - const: swinit
required:
- resets
then:
properties:
reg:
- minItems: 2
- maxItems: 2
+ minItems: 4
+ maxItems: 4
reg-names:
items:
- const: dbi
- const: addr_space
+ - const: dbi2
+ - const: atu
- if:
properties:
pcie_ep: pcie-ep@33800000 {
compatible = "fsl,imx8mp-pcie-ep";
- reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
- reg-names = "dbi", "addr_space";
+ reg = <0x33800000 0x100000>,
+ <0x18000000 0x8000000>,
+ <0x33900000 0x100000>,
+ <0x33b00000 0x100000>;
+ reg-names = "dbi", "addr_space", "dbi2", "atu";
clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
<&clk IMX8MP_CLK_HSIO_AXI>,
<&clk IMX8MP_CLK_PCIE_ROOT>;
- fsl,imx8mm-pcie
- fsl,imx8mp-pcie
- fsl,imx95-pcie
+ - fsl,imx8q-pcie
clocks:
minItems: 3
- const: pcie_bus
- const: pcie_aux
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,imx8q-pcie
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: dbi
+ - const: mstr
+ - const: slv
+
unevaluatedProperties: false
examples:
properties:
compatible:
- enum:
- - fsl,ls1021a-pcie
- - fsl,ls2080a-pcie
- - fsl,ls2085a-pcie
- - fsl,ls2088a-pcie
- - fsl,ls1088a-pcie
- - fsl,ls1046a-pcie
- - fsl,ls1043a-pcie
- - fsl,ls1012a-pcie
- - fsl,ls1028a-pcie
- - fsl,lx2160a-pcie
-
+ oneOf:
+ - enum:
+ - fsl,ls1012a-pcie
+ - fsl,ls1021a-pcie
+ - fsl,ls1028a-pcie
+ - fsl,ls1043a-pcie
+ - fsl,ls1046a-pcie
+ - fsl,ls1088a-pcie
+ - fsl,ls2080a-pcie
+ - fsl,ls2085a-pcie
+ - fsl,ls2088a-pcie
+ - items:
+ - const: fsl,lx2160ar2-pcie
+ - const: fsl,ls2088a-pcie
reg:
maxItems: 2
- const: config
fsl,pcie-scfg:
- $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description: A phandle to the SCFG device node. The second entry is the
physical PCIe controller index starting from '0'. This is used to get
SCFG PEXN registers.
+ items:
+ items:
+ - description: A phandle to the SCFG device node
+ - description: PCIe controller index starting from '0'
+ maxItems: 1
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
minItems: 1
maxItems: 2
+ num-viewport:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Number of outbound view ports configured in hardware. It's the same as
+ the number of outbound AT windows.
+ maximum: 256
+
required:
- compatible
- reg
minItems: 3
maxItems: 4
- clocks: true
+ clocks:
+ maxItems: 5
clock-names:
items:
As described in IEEE Std 1275-1994, but must provide at least a
definition of non-prefetchable memory. One or both of prefetchable Memory
and IO Space may also be provided.
- minItems: 1
- maxItems: 3
dma-coherent: true
iommu-map: true
- mediatek,mt8195-pcie
- const: mediatek,mt8192-pcie
- const: mediatek,mt8192-pcie
+ - const: airoha,en7581-pcie
reg:
maxItems: 1
resets:
minItems: 1
- maxItems: 2
+ maxItems: 3
reset-names:
minItems: 1
- maxItems: 2
+ maxItems: 3
items:
- enum: [ phy, mac ]
+ enum: [ phy, mac, phy-lane0, phy-lane1, phy-lane2 ]
clocks:
- minItems: 4
+ minItems: 1
maxItems: 6
clock-names:
- minItems: 4
+ minItems: 1
maxItems: 6
assigned-clocks:
const: mediatek,mt8192-pcie
then:
properties:
+ clocks:
+ minItems: 4
+
clock-names:
items:
- const: pl_250m
- const: tl_32k
- const: peri_26m
- const: top_133m
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+
- if:
properties:
compatible:
- mediatek,mt8195-pcie
then:
properties:
+ clocks:
+ minItems: 4
+
clock-names:
items:
- const: pl_250m
- const: tl_32k
- const: peri_26m
- const: peri_mem
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+
- if:
properties:
compatible:
- mediatek,mt7986-pcie
then:
properties:
+ clocks:
+ minItems: 4
+
clock-names:
items:
- const: pl_250m
- const: peri_26m
- const: top_133m
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ const: airoha,en7581-pcie
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: sys-ck
+
+ resets:
+ minItems: 3
+
+ reset-names:
+ items:
+ - const: phy-lane0
+ - const: phy-lane1
+ - const: phy-lane2
+
unevaluatedProperties: false
examples:
Common properties for PCI Endpoint Controller Nodes.
maintainers:
- - Kishon Vijay Abraham I <kishon@ti.com>
+ - Kishon Vijay Abraham I <kishon@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
properties:
$nodename:
default: 1
maximum: 16
+ linux,pci-domain:
+ description:
+ If present this property assigns a fixed PCI domain number to a PCI
+ Endpoint Controller, otherwise an unstable (across boots) unique number
+ will be assigned. It is required to either not set this property at all
+ or set it for all PCI endpoint controllers in the system, otherwise
+ potentially conflicting domain numbers may be assigned to endpoint
+ controllers. The domain number for each endpoint controller in the system
+ must be unique.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
required:
- compatible
interrupts:
minItems: 1
- maxItems: 8
+ maxItems: 9
interrupt-names:
minItems: 1
- maxItems: 8
+ maxItems: 9
iommu-map:
minItems: 1
description: GPIO controlled connection to WAKE# signal
maxItems: 1
+ vddpe-3v3-supply:
+ description: PCIe endpoint power supply
+
required:
- reg
- reg-names
phy-names = "pciephy";
max-link-speed = <3>;
num-lanes = <2>;
+ linux,pci-domain = <0>;
};
- const: aggre1 # Aggre NoC PCIe1 AXI clock
interrupts:
- maxItems: 1
+ minItems: 8
+ maxItems: 8
interrupt-names:
items:
- - const: msi
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
resets:
maxItems: 1
items:
- const: pci
- vddpe-3v3-supply:
- description: PCIe endpoint power supply
-
allOf:
- $ref: qcom,pcie-common.yaml#
dma-coherent;
- interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
items:
- const: pci
- vddpe-3v3-supply:
- description: A phandle to the PCIe endpoint power supply
-
required:
- interconnects
- interconnect-names
- const: aggre1 # Aggre NoC PCIe1 AXI clock
interrupts:
- minItems: 8
- maxItems: 8
+ minItems: 9
+ maxItems: 9
interrupt-names:
items:
- const: msi5
- const: msi6
- const: msi7
+ - const: global
operating-points-v2: true
opp-table:
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0", "msi1", "msi2", "msi3",
- "msi4", "msi5", "msi6", "msi7";
+ "msi4", "msi5", "msi6", "msi7", "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
vdda_refclk-supply:
description: A phandle to the core analog power supply for IC which generates reference clock
+ vddpe-3v3-supply:
+ description: A phandle to the PCIe endpoint power supply
+
phys:
maxItems: 1
- enum:
- renesas,r8a779f0-pcie-ep # R-Car S4-8
- renesas,r8a779g0-pcie-ep # R-Car V4H
+ - renesas,r8a779h0-pcie-ep # R-Car V4M
- const: renesas,rcar-gen4-pcie-ep # R-Car Gen4
reg:
- enum:
- renesas,r8a779f0-pcie # R-Car S4-8
- renesas,r8a779g0-pcie # R-Car V4H
+ - renesas,r8a779h0-pcie # R-Car V4M
- const: renesas,rcar-gen4-pcie # R-Car Gen4
reg:
interrupts:
maxItems: 1
- clocks: true
+ clocks:
+ minItems: 1
+ maxItems: 3
- clock-names: true
+ clock-names:
+ minItems: 1
+ maxItems: 3
resets:
maxItems: 1
minItems: 1
maxItems: 2
- clock-names: true
+ clock-names:
+ minItems: 1
+ maxItems: 2
resets:
minItems: 1
maxItems: 2
- reset-names: true
+ reset-names:
+ minItems: 1
+ maxItems: 2
num-ib-windows:
const: 16
- const: reg
- const: cfg
+ ti,syscon-acspcie-proxy-ctrl:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: Phandle to the ACSPCIE Proxy Control Register
+ - description: Bitmask corresponding to the PAD IO Buffer
+ output enable fields (Active Low).
+ description: Specifier for enabling the ACSPCIE PAD outputs to drive
+ the reference clock to the Endpoint device.
+
ti,syscon-pcie-ctrl:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
interrupt-map:
maxItems: 4
+ phys:
+ minItems: 1
+ maxItems: 4
+ description: One phy per logical lane, in order
+
power-domains:
maxItems: 1
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/xlnx-zynqmp-power.h>
soc {
#address-cells = <2>;
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
msi-parent = <&nwl_pcie>;
+ phys = <&psgtr 0 PHY_TYPE_PCIE 0 0>;
power-domains = <&zynqmp_firmware PD_PCIE>;
iommus = <&smmu 0x4d0>;
pcie_intc: legacy-interrupt-controller {
properties:
compatible:
- const: xlnx,xdma-host-3.00
+ enum:
+ - xlnx,xdma-host-3.00
+ - xlnx,qdma-host-3.00
reg:
- maxItems: 1
+ items:
+ - description: configuration region and XDMA bridge register.
+ - description: QDMA bridge register.
+ minItems: 1
+
+ reg-names:
+ items:
+ - const: cfg
+ - const: breg
+ minItems: 1
ranges:
maxItems: 2
- "#interrupt-cells"
- interrupt-controller
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,qdma-host-3.00
+then:
+ properties:
+ reg:
+ minItems: 2
+ reg-names:
+ minItems: 2
+ required:
+ - reg-names
+else:
+ properties:
+ reg:
+ maxItems: 1
+ reg-names:
+ maxItems: 1
+
unevaluatedProperties: false
examples:
- arm,cmn-600
- arm,cmn-650
- arm,cmn-700
+ - arm,cmn-s3
- arm,ci-700
reg:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,ni.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm NI (Network-on-Chip Interconnect) Performance Monitors
+
+maintainers:
+ - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+ compatible:
+ const: arm,ni-700
+
+ reg:
+ items:
+ - description: Complete configuration register space
+
+ interrupts:
+ minItems: 1
+ maxItems: 32
+ description: Overflow interrupts, one per clock domain, in order of domain ID
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
3-tuple setting for each (up to 3) supported link
speed on the host. Range is 0 to 273000 in unit of
uV. Default is 0.
-- apm,tx-pre-cursor2 : 2st pre-cursor emphasis taps control. Two set of
+- apm,tx-pre-cursor2 : 2nd pre-cursor emphasis taps control. Two set of
3-tuple setting for each (up to 3) supported link
speed on the host. Range is 0 to 127400 in unit uV.
Default is 0x0.
maximum: 119
default: 100
+ nxp,sim:
+ description:
+ The system integration module (SIM) provides system control and chip
+ configuration registers.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
required:
- compatible
- reg
required:
- fsl,anatop
+ - if:
+ properties:
+ compatible:
+ const: fsl,imx7ulp-usbphy
+ then:
+ required:
+ - nxp,sim
+ else:
+ properties:
+ nxp,sim: false
+
additionalProperties: false
examples:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi3798cv200-combphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon STB PCIE/SATA/USB3 PHY
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+
+properties:
+ compatible:
+ const: hisilicon,hi3798cv200-combphy
+
+ reg:
+ maxItems: 1
+
+ '#phy-cells':
+ description: The cell contains the PHY mode
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ hisilicon,fixed-mode:
+ description: If the phy device doesn't support mode select but a fixed mode
+ setting, the property should be present to specify the particular mode.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 2, 4] # SATA, PCIE, USB3
+
+ hisilicon,mode-select-bits:
+ description: If the phy device support mode select, this property should be
+ present to specify the register bits in peripheral controller.
+ items:
+ - description: register_offset
+ - description: bit shift
+ - description: bit mask
+
+required:
+ - compatible
+ - reg
+ - '#phy-cells'
+ - clocks
+ - resets
+
+oneOf:
+ - required: ['hisilicon,fixed-mode']
+ - required: ['hisilicon,mode-select-bits']
+
+additionalProperties: false
+
+...
description:
One instance of the T-PHY on MT7988 suffers from a performance
problem in 10GBase-R mode which needs a work-around in the driver.
- This flag enables a work-around ajusting an analog phy setting and
+ This flag enables a work-around adjusting an analog phy setting and
is required for XFI Port0 of the MT7988 SoC to be in compliance with
the SFP specification.
The force mode is used to manually switch the shared phy mode between
USB3 and PCIe, when USB3 phy type is selected by the consumer, and
force-mode is set, will cause phy's power and pipe toggled and force
- phy as USB3 mode which switched from default PCIe mode. But perfer to
+ phy as USB3 mode which switched from default PCIe mode. But prefer to
use the property "mediatek,syscon-type" for newer SoCs that support it.
type: boolean
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nuvoton,ma35d1-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 USB2 phy
+
+maintainers:
+ - Hui-Ping Chen <hpchen0nvt@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,ma35d1-usb2-phy
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ nuvoton,sys:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to syscon for checking the PHY clock status.
+
+required:
+ - compatible
+ - "#phy-cells"
+ - clocks
+ - nuvoton,sys
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+
+ usb_phy: usb-phy {
+ compatible = "nuvoton,ma35d1-usb2-phy";
+ clocks = <&clk USBD_GATE>;
+ nuvoton,sys = <&sys>;
+ #phy-cells = <0>;
+ };
+++ /dev/null
-HiSilicon STB PCIE/SATA/USB3 PHY
-
-Required properties:
-- compatible: Should be "hisilicon,hi3798cv200-combphy"
-- reg: Should be the address space for COMBPHY configuration and state
- registers in peripheral controller, e.g. PERI_COMBPHY0_CFG and
- PERI_COMBPHY0_STATE for COMBPHY0 Hi3798CV200 SoC.
-- #phy-cells: Should be 1. The cell number is used to select the phy mode
- as defined in <dt-bindings/phy/phy.h>.
-- clocks: The phandle to clock provider and clock specifier pair.
-- resets: The phandle to reset controller and reset specifier pair.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Optional properties:
-- hisilicon,fixed-mode: If the phy device doesn't support mode select
- but a fixed mode setting, the property should be present to specify
- the particular mode.
-- hisilicon,mode-select-bits: If the phy device support mode select,
- this property should be present to specify the register bits in
- peripheral controller, as a 3 integers tuple:
- <register_offset bit_shift bit_mask>.
-
-Notes:
-- Between hisilicon,fixed-mode and hisilicon,mode-select-bits, one and only
- one of them should be present.
-- The device node should be a child of peripheral controller that contains
- COMBPHY configuration/state and PERI_CTRL register used to select PHY mode.
- Refer to arm/hisilicon/hisilicon.txt for the parent peripheral controller
- bindings.
-
-Examples:
-
-perictrl: peripheral-controller@8a20000 {
- compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
- "simple-mfd";
- reg = <0x8a20000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x8a20000 0x1000>;
-
- combphy0: phy@850 {
- compatible = "hisilicon,hi3798cv200-combphy";
- reg = <0x850 0x8>;
- #phy-cells = <1>;
- clocks = <&crg HISTB_COMBPHY0_CLK>;
- resets = <&crg 0x188 4>;
- hisilicon,fixed-mode = <PHY_TYPE_USB3>;
- };
-
- combphy1: phy@858 {
- compatible = "hisilicon,hi3798cv200-combphy";
- reg = <0x858 0x8>;
- #phy-cells = <1>;
- clocks = <&crg HISTB_COMBPHY1_CLK>;
- resets = <&crg 0x188 12>;
- hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
- };
-};
compatible:
enum:
- qcom,hdmi-phy-8996
+ - qcom,hdmi-phy-8998
reg:
maxItems: 6
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SATA PHY Controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description:
+ The Qualcomm SATA PHY describes on-chip SATA Physical layer controllers.
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq806x-sata-phy
+ - qcom,apq8064-sata-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: cfg
+
+ '#phy-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+ sata_phy: sata-phy@1b400000 {
+ compatible = "qcom,ipq806x-sata-phy";
+ reg = <0x1b400000 0x200>;
+
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+
+ #phy-cells = <0>;
+ };
+
- qcom,sm8650-qmp-gen4x2-pcie-phy
- qcom,x1e80100-qmp-gen3x2-pcie-phy
- qcom,x1e80100-qmp-gen4x2-pcie-phy
+ - qcom,x1e80100-qmp-gen4x4-pcie-phy
reg:
minItems: 1
contains:
enum:
- qcom,sc8280xp-qmp-gen3x4-pcie-phy
+ - qcom,x1e80100-qmp-gen4x4-pcie-phy
then:
properties:
reg:
- qcom,sm8550-qmp-gen4x2-pcie-phy
- qcom,sm8650-qmp-gen3x2-pcie-phy
- qcom,sm8650-qmp-gen4x2-pcie-phy
- - qcom,x1e80100-qmp-gen3x2-pcie-phy
- - qcom,x1e80100-qmp-gen4x2-pcie-phy
then:
properties:
clocks:
- qcom,sc8280xp-qmp-gen3x1-pcie-phy
- qcom,sc8280xp-qmp-gen3x2-pcie-phy
- qcom,sc8280xp-qmp-gen3x4-pcie-phy
+ - qcom,x1e80100-qmp-gen3x2-pcie-phy
+ - qcom,x1e80100-qmp-gen4x2-pcie-phy
+ - qcom,x1e80100-qmp-gen4x4-pcie-phy
then:
properties:
clocks:
- qcom,sm8550-qmp-gen4x2-pcie-phy
- qcom,sm8650-qmp-gen4x2-pcie-phy
- qcom,x1e80100-qmp-gen4x2-pcie-phy
+ - qcom,x1e80100-qmp-gen4x4-pcie-phy
then:
properties:
resets:
qcom,tune-usb2-amplitude:
$ref: /schemas/types.yaml#/definitions/uint8
- description: High-Speed trasmit amplitude
+ description: High-Speed transmit amplitude
minimum: 0
maximum: 15
default: 8
+++ /dev/null
-Qualcomm's APQ8016/MSM8916 USB transceiver controller
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: Should contain "qcom,usb-8x16-phy".
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: USB PHY base address and length of the register map
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: See clock-bindings.txt section "consumers". List of
- two clock specifiers for interface and core controller
- clocks.
-
-- clock-names:
- Usage: required
- Value type: <string>
- Definition: Must contain "iface" and "core" strings.
-
-- vddcx-supply:
- Usage: required
- Value type: <phandle>
- Definition: phandle to the regulator VDCCX supply node.
-
-- v1p8-supply:
- Usage: required
- Value type: <phandle>
- Definition: phandle to the regulator 1.8V supply node.
-
-- v3p3-supply:
- Usage: required
- Value type: <phandle>
- Definition: phandle to the regulator 3.3V supply node.
-
-- resets:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: See reset.txt section "consumers". PHY reset specifier.
-
-- reset-names:
- Usage: required
- Value type: <string>
- Definition: Must contain "phy" string.
-
-- switch-gpio:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: Some boards are using Dual SPDT USB Switch, witch is
- controlled by GPIO to de/multiplex D+/D- USB lines
- between connectors.
-
-Example:
- usb_phy: phy@78d9000 {
- compatible = "qcom,usb-8x16-phy";
- reg = <0x78d9000 0x400>;
-
- vddcx-supply = <&pm8916_s1_corner>;
- v1p8-supply = <&pm8916_l7>;
- v3p3-supply = <&pm8916_l13>;
-
- clocks = <&gcc GCC_USB_HS_AHB_CLK>,
- <&gcc GCC_USB_HS_SYSTEM_CLK>;
- clock-names = "iface", "core";
-
- resets = <&gcc GCC_USB2A_PHY_BCR>;
- reset-names = "phy";
-
- // D+/D- lines: 1 - Routed to HUB, 0 - Device connector
- switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
- };
-
+++ /dev/null
-Qualcomm APQ8064 SATA PHY Controller
-------------------------------------
-
-SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
-Each SATA PHY controller should have its own node.
-
-Required properties:
-- compatible: compatible list, contains "qcom,apq8064-sata-phy".
-- reg: offset and length of the SATA PHY register set;
-- #phy-cells: must be zero
-- clocks: a list of phandles and clock-specifier pairs, one for each entry in
- clock-names.
-- clock-names: must be "cfg" for phy config clock.
-
-Example:
- sata_phy: sata-phy@1b400000 {
- compatible = "qcom,apq8064-sata-phy";
- reg = <0x1b400000 0x200>;
-
- clocks = <&gcc SATA_PHY_CFG_CLK>;
- clock-names = "cfg";
-
- #phy-cells = <0>;
- };
+++ /dev/null
-Qualcomm IPQ806x SATA PHY Controller
-------------------------------------
-
-SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
-Each SATA PHY controller should have its own node.
-
-Required properties:
-- compatible: compatible list, contains "qcom,ipq806x-sata-phy"
-- reg: offset and length of the SATA PHY register set;
-- #phy-cells: must be zero
-- clocks: must be exactly one entry
-- clock-names: must be "cfg"
-
-Example:
- sata_phy: sata-phy@1b400000 {
- compatible = "qcom,ipq806x-sata-phy";
- reg = <0x1b400000 0x200>;
-
- clocks = <&gcc SATA_PHY_CFG_CLK>;
- clock-names = "cfg";
-
- #phy-cells = <0>;
- };
compatible:
oneOf:
- items:
- - const: renesas,usb2-phy-r8a77470 # RZ/G1C
+ - enum:
+ - renesas,usb2-phy-r8a77470 # RZ/G1C
+ - renesas,usb2-phy-r9a08g045 # RZ/G3S
- items:
- enum:
- const: ref
- const: apb
+ "#clock-cells":
+ const: 0
+
"#phy-cells":
const: 0
minItems: 1
maxItems: 2
- clock-names: true
+ clock-names:
+ minItems: 1
+ maxItems: 6
resets:
minItems: 2
maxItems: 6
- reset-names: true
+ reset-names:
+ minItems: 2
+ maxItems: 6
allOf:
- if:
minItems: 1
maxItems: 2
- clock-names: true
+ clock-names:
+ minItems: 1
+ maxItems: 2
resets:
minItems: 1
maxItems: 2
- reset-names: true
+ reset-names:
+ minItems: 1
+ maxItems: 2
socionext,syscon:
$ref: /schemas/types.yaml#/definitions/phandle
minItems: 2
maxItems: 3
- clock-names: true
+ clock-names:
+ minItems: 2
+ maxItems: 3
resets:
maxItems: 2
- reset-names: true
+ reset-names:
+ maxItems: 2
vbus-supply:
description: A phandle to the regulator for USB VBUS
minItems: 2
maxItems: 3
- clock-names: true
+ clock-names:
+ minItems: 2
+ maxItems: 3
resets:
maxItems: 2
- reset-names: true
+ reset-names:
+ maxItems: 2
vbus-supply:
description: A phandle to the regulator for USB VBUS, only for USB host
+++ /dev/null
-* Atmel AT91 Pinmux Controller
-
-The AT91 Pinmux Controller, enables the IC
-to share one PAD to several functional blocks. The sharing is done by
-multiplexing the PAD input/output signals. For each PAD there are up to
-8 muxing options (called periph modes). Since different modules require
-different PAD settings (like pull up, keeper, etc) the controller controls
-also the PAD settings parameters.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Atmel AT91 pin configuration node is a node of a group of pins which can be
-used for a specific device or function. This node represents both mux and config
-of the pins in that group. The 'pins' selects the function mode(also named pin
-mode) this pin can work on and the 'config' configures various pad settings
-such as pull-up, multi drive, etc.
-
-Required properties for iomux controller:
-- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
- or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl"
- or "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl"
-- atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
- configured in this periph mode. All the periph and bank need to be describe.
-
-How to create such array:
-
-Each column will represent the possible peripheral of the pinctrl
-Each line will represent a pio bank
-
-Take an example on the 9260
-Peripheral: 2 ( A and B)
-Bank: 3 (A, B and C)
-=>
-
- /* A B */
- 0xffffffff 0xffc00c3b /* pioA */
- 0xffffffff 0x7fff3ccf /* pioB */
- 0xffffffff 0x007fffff /* pioC */
-
-For each peripheral/bank we will describe in a u32 if a pin can be
-configured in it by putting 1 to the pin bit (1 << pin)
-
-Let's take the pioA on peripheral B
-From the datasheet Table 10-2.
-Peripheral B
-PA0 MCDB0
-PA1 MCCDB
-PA2
-PA3 MCDB3
-PA4 MCDB2
-PA5 MCDB1
-PA6
-PA7
-PA8
-PA9
-PA10 ETX2
-PA11 ETX3
-PA12
-PA13
-PA14
-PA15
-PA16
-PA17
-PA18
-PA19
-PA20
-PA21
-PA22 ETXER
-PA23 ETX2
-PA24 ETX3
-PA25 ERX2
-PA26 ERX3
-PA27 ERXCK
-PA28 ECRS
-PA29 ECOL
-PA30 RXD4
-PA31 TXD4
-
-=> 0xffc00c3b
-
-Required properties for pin configuration node:
-- atmel,pins: 4 integers array, represents a group of pins mux and config
- setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
- The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
- PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
-
-Bits used for CONFIG:
-PULL_UP (1 << 0): indicate this pin needs a pull up.
-MULTIDRIVE (1 << 1): indicate this pin needs to be configured as multi-drive.
- Multi-drive is equivalent to open-drain type output.
-DEGLITCH (1 << 2): indicate this pin needs deglitch.
-PULL_DOWN (1 << 3): indicate this pin needs a pull down.
-DIS_SCHMIT (1 << 4): indicate this pin needs to the disable schmitt trigger.
-DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the
- following values:
- 00 - No change (reset state value kept)
- 01 - Low
- 10 - Medium
- 11 - High
-OUTPUT (1 << 7): indicate this pin need to be configured as an output.
-OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low)
-SLEWRATE (1 << 9): slew rate of the pin: 0 = disable, 1 = enable
-DEBOUNCE (1 << 16): indicate this pin needs debounce.
-DEBOUNCE_VAL (0x3fff << 17): debounce value.
-
-NOTE:
-Some requirements for using atmel,at91rm9200-pinctrl binding:
-1. We have pin function node defined under at91 controller node to represent
- what pinmux functions this SoC supports.
-2. The driver can use the function node's name and pin configuration node's
- name describe the pin function and group hierarchy.
- For example, Linux at91 pinctrl driver takes the function node's name
- as the function name and pin configuration node's name as group name to
- create the map table.
-3. Each pin configuration node should have a phandle, devices can set pins
- configurations by referring to the phandle of that pin configuration node.
-4. The gpio controller must be describe in the pinctrl simple-bus.
-
-For each bank the required properties are:
-- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or
- "microchip,sam9x60-gpio"
- or "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"
-- reg: physical base address and length of the controller's registers
-- interrupts: interrupt outputs from the controller
-- interrupt-controller: marks the device node as an interrupt controller
-- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt
- for more details.
-- gpio-controller
-- #gpio-cells: should be 2; the first cell is the GPIO number and the second
- cell specifies GPIO flags as defined in <dt-bindings/gpio/gpio.h>.
-- clocks: bank clock
-
-Examples:
-
-pinctrl@fffff400 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
- reg = <0xfffff400 0x600>;
-
- pioA: gpio@fffff400 {
- compatible = "atmel,at91sam9x5-gpio";
- reg = <0xfffff400 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
- };
-
- atmel,mux-mask = <
- /* A B */
- 0xffffffff 0xffc00c3b /* pioA */
- 0xffffffff 0x7fff3ccf /* pioB */
- 0xffffffff 0x007fffff /* pioC */
- >;
-
- /* shared pinctrl settings */
- dbgu {
- pinctrl_dbgu: dbgu-0 {
- atmel,pins =
- <1 14 0x1 0x0 /* PB14 periph A */
- 1 15 0x1 0x1>; /* PB15 periph A with pullup */
- };
- };
-};
-
-dbgu: serial@fffff200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffff200 0x200>;
- interrupts = <1 4 7>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dbgu>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/atmel,at91rm9200-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIO3 Pinmux Controller
+
+maintainers:
+ - Manikandan Muralidharan <manikandan.m@microchip.com>
+
+description:
+ The AT91 Pinmux Controller, enables the IC to share one PAD to several
+ functional blocks. The sharing is done by multiplexing the PAD input/output
+ signals. For each PAD there are up to 8 muxing options (called periph modes).
+ Since different modules require different PAD settings (like pull up, keeper,
+ etc) the controller controls also the PAD settings parameters.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - atmel,at91rm9200-pinctrl
+ - atmel,at91sam9x5-pinctrl
+ - atmel,sama5d3-pinctrl
+ - microchip,sam9x60-pinctrl
+ - const: simple-mfd
+ - items:
+ - enum:
+ - microchip,sam9x7-pinctrl
+ - const: microchip,sam9x60-pinctrl
+ - const: simple-mfd
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ ranges: true
+
+ atmel,mux-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ Array of mask (periph per bank) to describe if a pin can be
+ configured in this periph mode. All the periph and bank need to
+ be described.
+
+ #How to create such array:
+
+ Each column will represent the possible peripheral of the pinctrl
+ Each line will represent a pio bank
+
+ #Example:
+
+ In at91sam9260.dtsi,
+ Peripheral: 2 ( A and B)
+ Bank: 3 (A, B and C)
+
+ # A B
+ 0xffffffff 0xffc00c3b # pioA
+ 0xffffffff 0x7fff3ccf # pioB
+ 0xffffffff 0x007fffff # pioC
+
+ For each peripheral/bank we will describe in a u32 if a pin can be
+ configured in it by putting 1 to the pin bit (1 << pin)
+
+ Let's take the pioA on peripheral B whose value is 0xffc00c3b
+ From the datasheet Table 10-2.
+ Peripheral B
+ PA0 MCDB0
+ PA1 MCCDB
+ PA2
+ PA3 MCDB3
+ PA4 MCDB2
+ PA5 MCDB1
+ PA6
+ PA7
+ PA8
+ PA9
+ PA10 ETX2
+ PA11 ETX3
+ PA12
+ PA13
+ PA14
+ PA15
+ PA16
+ PA17
+ PA18
+ PA19
+ PA20
+ PA21
+ PA22 ETXER
+ PA23 ETX2
+ PA24 ETX3
+ PA25 ERX2
+ PA26 ERX3
+ PA27 ERXCK
+ PA28 ECRS
+ PA29 ECOL
+ PA30 RXD4
+ PA31 TXD4
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+ - atmel,mux-mask
+
+patternProperties:
+ 'gpio@[0-9a-f]+$':
+ $ref: /schemas/gpio/atmel,at91rm9200-gpio.yaml
+ unevaluatedProperties: false
+
+additionalProperties:
+ type: object
+ additionalProperties:
+ type: object
+ additionalProperties: false
+
+ properties:
+ atmel,pins:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ Each entry consists of 4 integers and represents the pins
+ mux and config setting.The format is
+ atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
+ Supported pin number and mux varies for different SoCs, and
+ are defined in <include/dt-bindings/pinctrl/at91.h>.
+ items:
+ items:
+ - description:
+ Pin bank
+ - description:
+ Pin bank index
+ - description:
+ Peripheral function
+ - description:
+ Pad configuration
+
+examples:
+ - |
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/at91.h>
+
+ pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
+ ranges = <0xfffff400 0xfffff400 0x600>;
+
+ atmel,mux-mask = <
+ /* A B */
+ 0xffffffff 0xffc00c3b /* pioA */
+ 0xffffffff 0x7fff3ccf /* pioB */
+ 0xffffffff 0x007fffff /* pioC */
+ >;
+
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+ };
+ };
+...
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mobileye EyeQ5 pin controller
-
-description: >
- The EyeQ5 pin controller handles the two pin banks of the system. It belongs
- to a system-controller block called OLB.
-
- Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin
- muxing supports two functions for each pin: first is GPIO, second is
- pin-dependent.
-
- Pins and groups are bijective.
-
-maintainers:
- - Grégory Clement <gregory.clement@bootlin.com>
- - Théo Lebrun <theo.lebrun@bootlin.com>
- - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
-
-$ref: pinctrl.yaml#
-
-properties:
- compatible:
- enum:
- - mobileye,eyeq5-pinctrl
-
- reg:
- maxItems: 1
-
-patternProperties:
- "-pins?$":
- type: object
- description: Pin muxing configuration.
- $ref: pinmux-node.yaml#
- additionalProperties: false
- properties:
- pins: true
- function:
- enum: [gpio,
- # Bank A
- timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
- spi1, refclk0,
- # Bank B
- timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
- bias-disable: true
- bias-pull-down: true
- bias-pull-up: true
- drive-strength: true
- required:
- - pins
- - function
- allOf:
- - if:
- properties:
- function:
- const: gpio
- then:
- properties:
- pins:
- items: # PA0 - PA28, PB0 - PB22
- pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
- - if:
- properties:
- function:
- const: timer0
- then:
- properties:
- pins:
- items:
- enum: [PA0, PA1]
- - if:
- properties:
- function:
- const: timer1
- then:
- properties:
- pins:
- items:
- enum: [PA2, PA3]
- - if:
- properties:
- function:
- const: timer2
- then:
- properties:
- pins:
- items:
- enum: [PA4, PA5]
- - if:
- properties:
- function:
- const: timer5
- then:
- properties:
- pins:
- items:
- enum: [PA6, PA7, PA8, PA9]
- - if:
- properties:
- function:
- const: uart0
- then:
- properties:
- pins:
- items:
- enum: [PA10, PA11]
- - if:
- properties:
- function:
- const: uart1
- then:
- properties:
- pins:
- items:
- enum: [PA12, PA13]
- - if:
- properties:
- function:
- const: can0
- then:
- properties:
- pins:
- items:
- enum: [PA14, PA15]
- - if:
- properties:
- function:
- const: can1
- then:
- properties:
- pins:
- items:
- enum: [PA16, PA17]
- - if:
- properties:
- function:
- const: spi0
- then:
- properties:
- pins:
- items:
- enum: [PA18, PA19, PA20, PA21, PA22]
- - if:
- properties:
- function:
- const: spi1
- then:
- properties:
- pins:
- items:
- enum: [PA23, PA24, PA25, PA26, PA27]
- - if:
- properties:
- function:
- const: refclk0
- then:
- properties:
- pins:
- items:
- enum: [PA28]
- - if:
- properties:
- function:
- const: timer3
- then:
- properties:
- pins:
- items:
- enum: [PB0, PB1]
- - if:
- properties:
- function:
- const: timer4
- then:
- properties:
- pins:
- items:
- enum: [PB2, PB3]
- - if:
- properties:
- function:
- const: timer6
- then:
- properties:
- pins:
- items:
- enum: [PB4, PB5, PB6, PB7]
- - if:
- properties:
- function:
- const: uart2
- then:
- properties:
- pins:
- items:
- enum: [PB8, PB9]
- - if:
- properties:
- function:
- const: can2
- then:
- properties:
- pins:
- items:
- enum: [PB10, PB11]
- - if:
- properties:
- function:
- const: spi2
- then:
- properties:
- pins:
- items:
- enum: [PB12, PB13, PB14, PB15, PB16]
- - if:
- properties:
- function:
- const: spi3
- then:
- properties:
- pins:
- items:
- enum: [PB17, PB18, PB19, PB20, PB21]
- - if:
- properties:
- function:
- const: mclk0
- then:
- properties:
- pins:
- items:
- enum: [PB22]
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
One or more groups of pins to mux to a certain function
items:
enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
- smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
- smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
- smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
- spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
- spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
- bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
- r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
- fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
- fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
- pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
- ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
- smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
- sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
- mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
- scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
- smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
- spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
- wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
- hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
- bu4b, bu5, bu5b, bu6, gpo187 ]
+ smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4b, smb4c, smb15,
+ smb16, smb17, smb18, smb19, smb20, smb21, smb22, smb23,
+ smb23b, smb4d, smb14, smb5, smb4, smb3, spi0cs1, spi0cs2,
+ spi0cs3, spi1cs0, spi1cs1, spi1cs2, spi1cs3, spi1cs23, smb3c,
+ smb3b, bmcuart0a, uart1, jtag2, bmcuart1, uart2, sg1mdio,
+ bmcuart0b, r1err, r1md, r1oen, r2oen, rmii3, r3oen, smb3d,
+ fanin0, fanin1, fanin2, fanin3, fanin4, fanin5, fanin6,
+ fanin7, fanin8, fanin9, fanin10, fanin11, fanin12, fanin13,
+ fanin14, fanin15, pwm0, pwm1, pwm2, pwm3, r2, r2err, r2md,
+ r3rxer, ga20kbc, smb5d, lpc, espi, rg2, ddr, i3c0, i3c1,
+ i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2, smb2c, smb2b, smb1c,
+ smb1b, smb8, smb9, smb10, smb11, sd1, sd1pwr, pwm4, pwm5,
+ pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd,
+ mmcrst, clkout, serirq, scipme, smi, smb6, smb6b, smb6c,
+ smb6d, smb7, smb7b, smb7c, smb7d, spi1, faninx, r1, spi3,
+ spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c,
+ smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13,
+ spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
+ hgpio5, hgpio6, hgpio7, bu4, bu4b, bu5, bu5b, bu6, gpo187 ]
function:
description:
The function that a group of pins is muxed to
- enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
- smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
- smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
- smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
- spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
- spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
- bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
- r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
- fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
+ enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, smb5b,
+ smb5c, lkgpo0, pspi, jm1, jm2, smb4b, smb4c, smb15, smb16,
+ smb17, smb18, smb19, smb20, smb21, smb22, smb23, smb23b, smb4d,
+ smb14, smb5, smb4, smb3, spi0cs1, spi0cs2, spi0cs3, spi1cs0,
+ spi1cs1, spi1cs2, spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a,
+ uart1, jtag2, bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md,
+ r1oen, r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2,
+ fanin3, fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
- mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
- scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
- smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
- spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
- wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
- hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
- bu4b, bu5, bu5b, bu6, gpo187 ]
+ mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, scipme, smi,
+ smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c, smb7d, spi1,
+ faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi,
+ smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2,
+ smb12, smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2,
+ hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4, bu4b, bu5, bu5b,
+ bu6, gpo187 ]
dependencies:
groups: [ function ]
type: boolean
description: disable schmitt-trigger mode
+ input-schmitt-microvolt:
+ description: threshold strength for schmitt-trigger
+
input-debounce:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: Takes the debounce time in usec as argument or 0 to disable
+++ /dev/null
-Qualcomm APQ8064 TLMM block
-
-Required properties:
-- compatible: "qcom,apq8064-pinctrl"
-- reg: Should be the base address and length of the TLMM block.
-- interrupts: Should be the parent IRQ of the TLMM block.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
- The first cell is the gpio pin number and the
- second cell is used for optional parameters.
-- gpio-ranges: see ../gpio/gpio.txt
-
-Optional properties:
-
-- gpio-reserved-ranges: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Qualcomm's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
- output-low, output-high.
-
-Non-empty subnodes must specify the 'pins' property.
-
-Valid values for pins are:
- gpio0-gpio89
-
-Valid values for function are:
- cam_mclk, codec_mic_i2s, codec_spkr_i2s, gp_clk_0a, gp_clk_0b, gp_clk_1a,
- gp_clk_1b, gp_clk_2a, gp_clk_2b, gpio, gsbi1, gsbi2, gsbi3, gsbi4,
- gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6,
- gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1,
- gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm,
- riva_wlan, sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic, ps_hold
-
-Example:
-
- msmgpio: pinctrl@800000 {
- compatible = "qcom,apq8064-pinctrl";
- reg = <0x800000 0x4000>;
-
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 16 0x4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&gsbi5_uart_default>;
- gpio-ranges = <&msmgpio 0 0 90>;
-
- gsbi5_uart_default: gsbi5_uart_default {
- mux {
- pins = "gpio51", "gpio52";
- function = "gsbi5";
- };
-
- tx {
- pins = "gpio51";
- drive-strength = <4>;
- bias-disable;
- };
-
- rx {
- pins = "gpio52";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,apq8064-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. APQ8064 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm APQ8064 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,apq8064-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-apq8064-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-apq8064-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-apq8064-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-8][0-9])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc3_clk, sdc3_cmd, sdc3_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ cam_mclk, codec_mic_i2s, codec_spkr_i2s, gp_clk_0a,
+ gp_clk_0b, gp_clk_1a, gp_clk_1b, gp_clk_2a, gp_clk_2b,
+ gpio, gsbi1, gsbi2, gsbi3, gsbi4, gsbi4_cam_i2c,
+ gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3,
+ gsbi6, gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3,
+ gsbi7, gsbi7_spi_cs1, gsbi7_spi_cs2, gsbi7_spi_cs3,
+ gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm, riva_wlan,
+ sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic,
+ ps_hold ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@800000 {
+ compatible = "qcom,apq8064-pinctrl";
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 90>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart-state {
+ rx-pins {
+ pins = "gpio52";
+ function = "gsbi5";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio51";
+ function = "gsbi5";
+ bias-disable;
+ };
+ };
+ };
+++ /dev/null
-Qualcomm APQ8084 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MSM8960 platform.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be "qcom,apq8084-pinctrl"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the base address and size of the TLMM register space.
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
- Usage: required
- Value type: <none>
- Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 2. Specifying the pin number and flags, as defined
- in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
- Usage: required
- Value type: <none>
- Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 2. Specifying the pin number and flags, as defined
- in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
- Usage: required
- Definition: see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
- Usage: optional
- Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
- Usage: required
- Value type: <string-array>
- Definition: List of gpio pins affected by the properties specified in
- this subnode. Valid pins are:
- gpio0-gpio146,
- sdc1_clk,
- sdc1_cmd,
- sdc1_data
- sdc2_clk,
- sdc2_cmd,
- sdc2_data
-
-- function:
- Usage: required
- Value type: <string>
- Definition: Specify the alternative function to be configured for the
- specified pins. Functions are only valid for gpio pins.
- Valid values are:
- adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
- blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
- blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
- blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5,
- blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
- blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3,
- blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8,
- blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
- blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
- blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
- blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
- cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
- edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt, gcc_vtt,i
- gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio,
- hdmi_cec, hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic,
- ldo_en, ldo_update, mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst,
- pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
- qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
- sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
- spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s, tsif1,
- tsif2, uim, uim_batt_alarm
-
-- bias-disable:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configured as pull up.
-
-- output-high:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are configured in output mode, driven
- high.
- Not valid for sdc pins.
-
-- output-low:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are configured in output mode, driven
- low.
- Not valid for sdc pins.
-
-- drive-strength:
- Usage: optional
- Value type: <u32>
- Definition: Selects the drive strength for the specified pins, in mA.
- Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
- tlmm: pinctrl@fd510000 {
- compatible = "qcom,apq8084-pinctrl";
- reg = <0xfd510000 0x4000>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 147>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 208 0>;
-
- uart2: uart2-default {
- mux {
- pins = "gpio4", "gpio5";
- function = "blsp_uart2";
- };
-
- tx {
- pins = "gpio4";
- drive-strength = <4>;
- bias-disable;
- };
-
- rx {
- pins = "gpio5";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,apq8084-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. APQ8084 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm APQ8084 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,apq8084-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-apq8084-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-apq8084-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-apq8084-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-6])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+ sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+ blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+ blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
+ blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3,
+ blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
+ blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6,
+ blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
+ blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3,
+ blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2,
+ blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6,
+ blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10,
+ blsp_uart11, blsp_uart12, blsp_uim1, blsp_uim2,
+ blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7,
+ blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11,
+ blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
+ cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+ cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3,
+ gcc_obt, gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2,
+ gp0_clk, gp1_clk, gpio, hdmi_cec, hdmi_ddc, hdmi_dtest,
+ hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update,
+ mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst, pci_e1,
+ pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
+ qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
+ sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
+ spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s,
+ tsif1, tsif2, uim, uim_batt_alarm ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,apq8084-pinctrl";
+ reg = <0xfd510000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 147>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart-state {
+ rx-pins {
+ pins = "gpio5";
+ function = "blsp_uart2";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio4";
+ function = "blsp_uart2";
+ bias-disable;
+ };
+ };
+ };
+++ /dev/null
-Qualcomm Atheros IPQ4019 TLMM block
-
-This is the Top Level Mode Multiplexor block found on the Qualcomm IPQ8019
-platform, it provides pinctrl, pinmux, pinconf, and gpiolib facilities.
-
-Required properties:
-- compatible: "qcom,ipq4019-pinctrl"
-- reg: Should be the base address and length of the TLMM block.
-- interrupts: Should be the parent IRQ of the TLMM block.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
- The first cell is the gpio pin number and the
- second cell is used for optional parameters.
-- gpio-ranges: see ../gpio/gpio.txt
-
-Optional properties:
-
-- gpio-reserved-ranges: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
- drive-strength.
-
-Non-empty subnodes must specify the 'pins' property.
-Note that not all properties are valid for all pins.
-
-
-Valid values for qcom,pins are:
- gpio0-gpio99
- Supports mux, bias and drive-strength
-
-Valid values for qcom,function are:
-aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0, blsp_spi1, blsp_uart0,
-blsp_uart1, chip_rst, gpio, i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx,
-jtag, led0, led1, led2, led3, led4, led5, led6, led7, led8, led9, led10, led11,
-mdc, mdio, pcie, pmu, prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1,
-smart2, smart3, tm, wifi0, wifi1
-
-Example:
-
- tlmm: pinctrl@1000000 {
- compatible = "qcom,ipq4019-pinctrl";
- reg = <0x1000000 0x300000>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 100>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 208 0>;
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq4019-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ4019 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ4019 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,ipq4019-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq4019-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq4019-tlmm-state"
+ additionalProperties: false
+
+ "-hog(-[0-9]+)?$":
+ type: object
+ required:
+ - gpio-hog
+
+$defs:
+ qcom-ipq4019-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-9][0-9])$"
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0,
+ blsp_spi1, blsp_uart0, blsp_uart1, chip_rst, gpio,
+ i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx,
+ jtag, led0, led1, led2, led3, led4, led5, led6, led7,
+ led8, led9, led10, led11, mdc, mdio, pcie, pmu,
+ prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1,
+ smart2, smart3, tm, wifi0, wifi1 ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq4019-pinctrl";
+ reg = <0x01000000 0x300000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart-state {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+++ /dev/null
-Qualcomm IPQ8064 TLMM block
-
-Required properties:
-- compatible: "qcom,ipq8064-pinctrl"
-- reg: Should be the base address and length of the TLMM block.
-- interrupts: Should be the parent IRQ of the TLMM block.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
- The first cell is the gpio pin number and the
- second cell is used for optional parameters.
-- gpio-ranges: see ../gpio/gpio.txt
-
-Optional properties:
-
-- gpio-reserved-ranges: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Qualcomm's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
- output-low, output-high.
-
-Non-empty subnodes must specify the 'pins' property.
-
-Valid values for qcom,pins are:
- gpio0-gpio68
- Supports mux, bias, and drive-strength
-
- sdc3_clk, sdc3_cmd, sdc3_data
- Supports bias and drive-strength
-
-
-Valid values for function are:
- mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5,
- gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1,
- spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata,
- pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt,
- pcie1_clk_req, pcie2_rst, pcie2_prsnt, pcie2_pwren_n, pcie2_pwren,
- pcie2_pwrflt, pcie2_clk_req, pcie3_rst, pcie3_prsnt, pcie3_pwren_n,
- pcie3_pwren, pcie3_pwrflt, pcie3_clk_req, ps_hold
-
-Example:
-
- pinmux: pinctrl@800000 {
- compatible = "qcom,ipq8064-pinctrl";
- reg = <0x800000 0x4000>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinmux 0 0 69>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 32 0x4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&gsbi5_uart_default>;
-
- gsbi5_uart_default: gsbi5_uart_default {
- mux {
- pins = "gpio18", "gpio19";
- function = "gsbi5";
- };
-
- tx {
- pins = "gpio18";
- drive-strength = <4>;
- bias-disable;
- };
-
- rx {
- pins = "gpio19";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8064-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ8064 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ8064 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,ipq8064-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq8064-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq8064-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-ipq8064-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-8])$"
+ - enum: [ sdc3_clk, sdc3_cmd, sdc3_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5,
+ gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1,
+ spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata,
+ pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt,
+ pcie1_clk_req, pcie2_rst, pcie2_prsnt, pcie2_pwren_n, pcie2_pwren,
+ pcie2_pwrflt, pcie2_clk_req, pcie3_rst, pcie3_prsnt, pcie3_pwren_n,
+ pcie3_pwren, pcie3_pwrflt, pcie3_clk_req, ps_hold ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@800000 {
+ compatible = "qcom,ipq8064-pinctrl";
+ reg = <0x00800000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 69>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart-state {
+ rx-pins {
+ pins = "gpio19";
+ function = "gsbi5";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio18";
+ function = "gsbi5";
+ bias-disable;
+ };
+ };
+ };
additionalProperties: false
"-hog(-[0-9]+)?$":
+ type: object
required:
- gpio-hog
additionalProperties: false
"-hog(-[0-9]+)?$":
+ type: object
required:
- gpio-hog
- renesas,pfc-r8a7745 # RZ/G1E
- renesas,pfc-r8a77470 # RZ/G1C
- renesas,pfc-r8a774a1 # RZ/G2M
+ - renesas,pfc-r8a774a3 # RZ/G2M v3.0
- renesas,pfc-r8a774b1 # RZ/G2N
- renesas,pfc-r8a774c0 # RZ/G2E
- renesas,pfc-r8a774e1 # RZ/G2H
- rockchip,rk3368-pinctrl
- rockchip,rk3399-pinctrl
- rockchip,rk3568-pinctrl
+ - rockchip,rk3576-pinctrl
- rockchip,rk3588-pinctrl
- rockchip,rv1108-pinctrl
- rockchip,rv1126-pinctrl
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sophgo,cv1800-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800 Pin Controller
+
+maintainers:
+ - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+ compatible:
+ enum:
+ - sophgo,cv1800b-pinctrl
+ - sophgo,cv1812h-pinctrl
+ - sophgo,sg2000-pinctrl
+ - sophgo,sg2002-pinctrl
+
+ reg:
+ items:
+ - description: pinctrl for system domain
+ - description: pinctrl for rtc domain
+
+ reg-names:
+ items:
+ - const: sys
+ - const: rtc
+
+ resets:
+ maxItems: 1
+
+patternProperties:
+ '-cfg$':
+ type: object
+ description:
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl groups available on the machine.
+
+ additionalProperties: false
+
+ patternProperties:
+ '-pins$':
+ type: object
+ description: |
+ Each subnode will list the pins it needs, and how they should
+ be configured, with regard to muxer configuration, bias, input
+ enable/disable, input schmitt trigger, slew-rate, drive strength
+ and bus hold state. In addition, all pins in the same subnode
+ should have the same power domain. For configuration detail,
+ refer to https://github.com/sophgo/sophgo-doc/.
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ pinmux:
+ description: |
+ The list of GPIOs and their mux settings that properties in the
+ node apply to. This should be set using the GPIOMUX or GPIOMUX2
+ macro.
+
+ bias-pull-up:
+ type: boolean
+
+ bias-pull-down:
+ type: boolean
+
+ drive-strength-microamp:
+ description: typical current when output high level.
+
+ input-schmitt-microvolt:
+ description: typical threshold for schmitt trigger.
+
+ power-source:
+ description: power supplies at X mV.
+ enum: [ 1800, 3300 ]
+
+ slew-rate:
+ description: slew rate for output buffer (0 is fast, 1 is slow)
+ enum: [ 0, 1 ]
+
+ bias-bus-hold: true
+
+ required:
+ - pinmux
+ - power-source
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
+
+ pinctrl@3001000 {
+ compatible = "sophgo,cv1800b-pinctrl";
+ reg = <0x03001000 0x1000>,
+ <0x05027000 0x1000>;
+ reg-names = "sys", "rtc";
+
+ uart0_cfg: uart0-cfg {
+ uart0-pins {
+ pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+ <PINMUX(PIN_UART0_RX, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <10800>;
+ input-schmitt-microvolt = <0>;
+ power-source = <3300>;
+ slew-rate = <0>;
+ };
+ };
+ };
+
+...
- Alexandre TORGUE <alexandre.torgue@foss.st.com>
description: |
- STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware
+ STMicroelectronics's STM32 MCUs integrate a GPIO and Pin mux/config hardware
controller. It controls the input/output settings on the available pins and
also provides ability to multiplex and configure the output of various
on-chip controllers onto these pads.
This macro is available here:
- include/dt-bindings/pinctrl/stm32-pinfunc.h
Some examples of using macro:
- /* GPIO A9 set as alernate function 2 */
+ /* GPIO A9 set as alternate function 2 */
... {
pinmux = <STM32_PINMUX('A', 9, AF2)>;
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/platform/microsoft,surface-sam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Surface System Aggregator Module (SAM, SSAM)
+
+maintainers:
+ - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+ Surface devices use a standardized embedded controller to let the
+ operating system interface with various hardware functions. The
+ specific functionalities are modeled as subdevices and matched on
+ five levels: domain, category, target, instance and function.
+
+properties:
+ compatible:
+ const: microsoft,surface-sam
+
+ interrupts:
+ maxItems: 1
+
+ current-speed: true
+
+required:
+ - compatible
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ uart {
+ embedded-controller {
+ compatible = "microsoft,surface-sam";
+
+ interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>;
+
+ pinctrl-0 = <&ssam_state>;
+ pinctrl-names = "default";
+
+ current-speed = <4000000>;
+ };
+ };
- renesas,r8a7745-sysc # RZ/G1E
- renesas,r8a77470-sysc # RZ/G1C
- renesas,r8a774a1-sysc # RZ/G2M
+ - renesas,r8a774a3-sysc # RZ/G2M v3.0
- renesas,r8a774b1-sysc # RZ/G2N
- renesas,r8a774c0-sysc # RZ/G2E
- renesas,r8a774e1-sysc # RZ/G2H
- rockchip,rk3368-power-controller
- rockchip,rk3399-power-controller
- rockchip,rk3568-power-controller
+ - rockchip,rk3576-power-controller
- rockchip,rk3588-power-controller
- rockchip,rv1126-power-controller
- rockchip,rk3188-io-voltage-domain
- rockchip,rk3228-io-voltage-domain
- rockchip,rk3288-io-voltage-domain
+ - rockchip,rk3308-io-voltage-domain
- rockchip,rk3328-io-voltage-domain
- rockchip,rk3368-io-voltage-domain
- rockchip,rk3368-pmu-io-voltage-domain
- $ref: "#/$defs/rk3188"
- $ref: "#/$defs/rk3228"
- $ref: "#/$defs/rk3288"
+ - $ref: "#/$defs/rk3308"
- $ref: "#/$defs/rk3328"
- $ref: "#/$defs/rk3368"
- $ref: "#/$defs/rk3368-pmu"
wifi-supply:
description: The supply connected to APIO3_VDD. Also known as SDIO0.
+ rk3308:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3308-io-voltage-domain
+
+ then:
+ properties:
+ vccio0-supply:
+ description: The supply connected to VCCIO0.
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+ vccio5-supply:
+ description: The supply connected to VCCIO5.
+
rk3328:
if:
properties:
battery-detect-gpios:
maxItems: 1
+ interrupts:
+ maxItems: 1
+
io-channels:
items:
- description: Battery Temperature ADC
- compatible
- reg
- battery-detect-gpios
+ - interrupts
- io-channels
- io-channel-names
- nvmem-cells
compatible = "sprd,sc2731-fgu";
reg = <0xa00>;
battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&sc2731_pmic>;
+ interrupts = <4>;
io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
io-channel-names = "bat-temp", "charge-vol";
nvmem-cells = <&fgu_calib>;
- const: x-powers,axp202-battery-power-supply
- const: x-powers,axp209-battery-power-supply
- const: x-powers,axp221-battery-power-supply
+ - const: x-powers,axp717-battery-power-supply
- items:
- const: x-powers,axp803-battery-power-supply
- const: x-powers,axp813-battery-power-supply
- const: x-powers,axp813-battery-power-supply
+ monitored-battery:
+ description:
+ Specifies the phandle of an optional simple-battery connected to
+ this gauge.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
required:
- compatible
- Chen-Yu Tsai <wens@csie.org>
- Sebastian Reichel <sre@kernel.org>
-allOf:
- - $ref: power-supply.yaml#
-
properties:
compatible:
oneOf:
- x-powers,axp202-usb-power-supply
- x-powers,axp221-usb-power-supply
- x-powers,axp223-usb-power-supply
+ - x-powers,axp717-usb-power-supply
- x-powers,axp813-usb-power-supply
- items:
- const: x-powers,axp803-usb-power-supply
- const: x-powers,axp813-usb-power-supply
+ input-current-limit-microamp:
+ description:
+ Optional value to clamp the maximum input current limit to for
+ the device. If omitted, the programmed value from the EFUSE will
+ be used.
+ minimum: 100000
+ maximum: 4000000
required:
- compatible
+allOf:
+ - $ref: power-supply.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - x-powers,axp192-usb-power-supply
+ then:
+ properties:
+ input-current-limit-microamp:
+ enum: [100000, 500000]
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - x-powers,axp202-usb-power-supply
+ - x-powers,axp223-usb-power-supply
+ then:
+ properties:
+ input-current-limit-microamp:
+ enum: [100000, 500000, 900000]
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - x-powers,axp221-usb-power-supply
+ then:
+ properties:
+ input-current-limit-microamp:
+ enum: [500000, 900000]
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - x-powers,axp717-usb-power-supply
+ then:
+ properties:
+ input-current-limit-microamp:
+ description: Maximum input current in increments of 50000 uA.
+ minimum: 100000
+ maximum: 3250000
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - x-powers,axp813-usb-power-supply
+ then:
+ properties:
+ input-current-limit-microamp:
+ enum: [100000, 500000, 900000, 1500000, 2000000, 2500000,
+ 3000000, 3500000, 4000000]
+
additionalProperties: false
2. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt
3. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
Documentation/devicetree/bindings/mfd/tc3589x.txt
- Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
-4. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+ Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
+4. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
5. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml
6. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
properties:
compatible:
- enum:
- - fsl,etsec-ptp
- - fsl,fman-ptp-timer
- - fsl,dpaa2-ptp
- - fsl,enetc-ptp
+ oneOf:
+ - enum:
+ - fsl,etsec-ptp
+ - fsl,fman-ptp-timer
+ - fsl,dpaa2-ptp
+ - items:
+ - const: pci1957,ee02
+ - const: fsl,enetc-ptp
reg:
maxItems: 1
- compatible
- reg
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,enetc-ptp
+ then:
+ $ref: /schemas/pci/pci-device.yaml
+
additionalProperties: false
examples:
- description: Module Clock
- description: Bus Clock
- # Even though it only applies to subschemas under the conditionals,
- # not listing them here will trigger a warning because of the
- # additionalsProperties set to false.
- clock-names: true
+ clock-names:
+ minItems: 1
+ items:
+ - const: mod
+ - const: bus
resets:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/cirrus,ep9301-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx PWM controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-pwm
+ - items:
+ - enum:
+ - cirrus,ep9302-pwm
+ - cirrus,ep9307-pwm
+ - cirrus,ep9312-pwm
+ - cirrus,ep9315-pwm
+ - const: cirrus,ep9301-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SoC PWM clock
+
+ "#pwm-cells":
+ const: 3
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+ pwm@80910000 {
+ compatible = "cirrus,ep9301-pwm";
+ reg = <0x80910000 0x10>;
+ clocks = <&syscon EP93XX_CLK_PWM>;
+ #pwm-cells = <3>;
+ };
- enum:
- amlogic,meson8-pwm-v2
- amlogic,meson-s4-pwm
+ - items:
+ - enum:
+ - amlogic,meson-a1-pwm
+ - const: amlogic,meson-s4-pwm
- items:
- enum:
- amlogic,meson8b-pwm-v2
minItems: 1
maxItems: 2
+ power-domains:
+ maxItems: 1
+
"#pwm-cells":
const: 3
required:
- clocks
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,meson-a1-pwm
+ then:
+ required:
+ - power-domains
+
additionalProperties: false
examples:
- renesas,pwm-r8a77995 # R-Car D3
- renesas,pwm-r8a779a0 # R-Car V3U
- renesas,pwm-r8a779g0 # R-Car V4H
+ - renesas,pwm-r8a779h0 # R-Car V4M
- const: renesas,pwm-rcar
reg:
- renesas,tpu-r8a77980 # R-Car V3H
- renesas,tpu-r8a779a0 # R-Car V3U
- renesas,tpu-r8a779g0 # R-Car V4H
+ - renesas,tpu-r8a779h0 # R-Car V4M
- const: renesas,tpu
reg:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6397-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6397 Regulator
+
+maintainers:
+ - Sen Chu <sen.chu@mediatek.com>
+ - Macpaul Lin <macpaul.lin@mediatek.com>
+
+description:
+ Regulator node of the PMIC. This node should under the PMIC's device node.
+ All voltage regulators provided by the PMIC are described as sub-nodes of
+ this node.
+
+properties:
+ compatible:
+ items:
+ - const: mediatek,mt6397-regulator
+
+patternProperties:
+ "^(buck_)?v(core|drm|gpu|io18|pca(7|15)|sramca(7|15))$":
+ description: Buck regulators
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6397-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(tcxo|(a|io)28)$":
+ description: LDOs with fixed 2.8V output and 0~100/10mV tuning
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes: false
+ unevaluatedProperties: false
+
+ "^(ldo_)?vusb$":
+ description: LDOs with fixed 3.0V output and 0~100/10mV tuning
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes: false
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(cama|emc3v3|gp[123456]|ibr|mc|mch)$":
+ description: LDOs with variable output and 0~100/10mV tuning
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes: false
+ unevaluatedProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mt6397_regulators: regulators {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-name = "vpca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <200>;
+ };
+
+ mt6397_vpca7_reg: buck_vpca7 {
+ regulator-name = "vpca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vsramca15_reg: buck_vsramca15 {
+ regulator-name = "vsramca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vsramca7_reg: buck_vsramca7 {
+ regulator-name = "vsramca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vcore_reg: buck_vcore {
+ regulator-name = "vcore";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vgpu_reg: buck_vgpu {
+ regulator-name = "vgpu";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vdrm_reg: buck_vdrm {
+ regulator-name = "vdrm";
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <500>;
+ };
+
+ mt6397_vio18_reg: buck_vio18 {
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2120000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <500>;
+ };
+
+ mt6397_vtcxo_reg: ldo_vtcxo {
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ };
+
+ mt6397_va28_reg: ldo_va28 {
+ regulator-name = "va28";
+ /* fixed output 2.8 V */
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vcama_reg: ldo_vcama {
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vio28_reg: ldo_vio28 {
+ regulator-name = "vio28";
+ /* fixed output 2.8 V */
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6397_usb_reg: ldo_vusb {
+ regulator-name = "vusb";
+ /* fixed output 3.3 V */
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vmc_reg: ldo_vmc {
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vmch_reg: ldo_vmch {
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+ regulator-name = "vemc_3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp1_reg: ldo_vgp1 {
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1220000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6397_vgp2_reg: ldo_vgp2 {
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp3_reg: ldo_vgp3 {
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp5_reg: ldo_vgp5 {
+ regulator-name = "vgp5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp6_reg: ldo_vgp6 {
+ regulator-name = "vgp6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vibr_reg: ldo_vibr {
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
reg:
maxItems: 1
+ lvin-supply:
+ description: Input supply phandle for LDO1 and LDO2
+
+ pvin1-supply:
+ description: Input supply phandle for VDD_IO (BUCK1)
+
+ pvin2-supply:
+ description: Input supply phandle for VDD_DDR (BUCK2)
+
+ pvin3-supply:
+ description: Input supply phandle for VDD_CORE (BUCK3)
+
+ pvin4-supply:
+ description: Input supply phandle for VDD_OTHER (BUCK4)
+
regulators:
type: object
additionalProperties: false
pmic@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
+ lvin-supply = <®_5v>;
+ pvin1-supply = <®_5v>;
+ pvin2-supply = <®_5v>;
+ pvin3-supply = <®_5v>;
+ pvin4-supply = <®_5v>;
regulators {
VDD_IO {
+++ /dev/null
-Mediatek MT6397 Regulator
-
-Required properties:
-- compatible: "mediatek,mt6397-regulator"
-- mt6397regulator: List of regulators provided by this controller. It is named
- according to its regulator type, buck_<name> and ldo_<name>.
- The definition for each of these nodes is defined using the standard binding
- for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
-
-The valid names for regulators are::
-BUCK:
- buck_vpca15, buck_vpca7, buck_vsramca15, buck_vsramca7, buck_vcore, buck_vgpu,
- buck_vdrm, buck_vio18
-LDO:
- ldo_vtcxo, ldo_va28, ldo_vcama, ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch,
- ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6,
- ldo_vibr
-
-BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to
-values specified in dt-bindings/regulator/mediatek,mt6397-regulator.h
-
-Example:
- pmic {
- compatible = "mediatek,mt6397";
-
- mt6397regulator: mt6397regulator {
- compatible = "mediatek,mt6397-regulator";
-
- mt6397_vpca15_reg: buck_vpca15 {
- regulator-compatible = "buck_vpca15";
- regulator-name = "vpca15";
- regulator-min-microvolt = < 850000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <12500>;
- regulator-enable-ramp-delay = <200>;
- };
-
- mt6397_vpca7_reg: buck_vpca7 {
- regulator-compatible = "buck_vpca7";
- regulator-name = "vpca7";
- regulator-min-microvolt = < 850000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <12500>;
- regulator-enable-ramp-delay = <115>;
- };
-
- mt6397_vsramca15_reg: buck_vsramca15 {
- regulator-compatible = "buck_vsramca15";
- regulator-name = "vsramca15";
- regulator-min-microvolt = < 850000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <12500>;
- regulator-enable-ramp-delay = <115>;
-
- };
-
- mt6397_vsramca7_reg: buck_vsramca7 {
- regulator-compatible = "buck_vsramca7";
- regulator-name = "vsramca7";
- regulator-min-microvolt = < 850000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <12500>;
- regulator-enable-ramp-delay = <115>;
-
- };
-
- mt6397_vcore_reg: buck_vcore {
- regulator-compatible = "buck_vcore";
- regulator-name = "vcore";
- regulator-min-microvolt = < 850000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <12500>;
- regulator-enable-ramp-delay = <115>;
- };
-
- mt6397_vgpu_reg: buck_vgpu {
- regulator-compatible = "buck_vgpu";
- regulator-name = "vgpu";
- regulator-min-microvolt = < 700000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <12500>;
- regulator-enable-ramp-delay = <115>;
- };
-
- mt6397_vdrm_reg: buck_vdrm {
- regulator-compatible = "buck_vdrm";
- regulator-name = "vdrm";
- regulator-min-microvolt = < 800000>;
- regulator-max-microvolt = <1400000>;
- regulator-ramp-delay = <12500>;
- regulator-enable-ramp-delay = <500>;
- };
-
- mt6397_vio18_reg: buck_vio18 {
- regulator-compatible = "buck_vio18";
- regulator-name = "vio18";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2120000>;
- regulator-ramp-delay = <12500>;
- regulator-enable-ramp-delay = <500>;
- };
-
- mt6397_vtcxo_reg: ldo_vtcxo {
- regulator-compatible = "ldo_vtcxo";
- regulator-name = "vtcxo";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-enable-ramp-delay = <90>;
- };
-
- mt6397_va28_reg: ldo_va28 {
- regulator-compatible = "ldo_va28";
- regulator-name = "va28";
- /* fixed output 2.8 V */
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vcama_reg: ldo_vcama {
- regulator-compatible = "ldo_vcama";
- regulator-name = "vcama";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2800000>;
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vio28_reg: ldo_vio28 {
- regulator-compatible = "ldo_vio28";
- regulator-name = "vio28";
- /* fixed output 2.8 V */
- regulator-enable-ramp-delay = <240>;
- };
-
- mt6397_usb_reg: ldo_vusb {
- regulator-compatible = "ldo_vusb";
- regulator-name = "vusb";
- /* fixed output 3.3 V */
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vmc_reg: ldo_vmc {
- regulator-compatible = "ldo_vmc";
- regulator-name = "vmc";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vmch_reg: ldo_vmch {
- regulator-compatible = "ldo_vmch";
- regulator-name = "vmch";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vemc_3v3_reg: ldo_vemc3v3 {
- regulator-compatible = "ldo_vemc3v3";
- regulator-name = "vemc_3v3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vgp1_reg: ldo_vgp1 {
- regulator-compatible = "ldo_vgp1";
- regulator-name = "vcamd";
- regulator-min-microvolt = <1220000>;
- regulator-max-microvolt = <3300000>;
- regulator-enable-ramp-delay = <240>;
- };
-
- mt6397_vgp2_reg: ldo_vgp2 {
- egulator-compatible = "ldo_vgp2";
- regulator-name = "vcamio";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3300000>;
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vgp3_reg: ldo_vgp3 {
- regulator-compatible = "ldo_vgp3";
- regulator-name = "vcamaf";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vgp4_reg: ldo_vgp4 {
- regulator-compatible = "ldo_vgp4";
- regulator-name = "vgp4";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vgp5_reg: ldo_vgp5 {
- regulator-compatible = "ldo_vgp5";
- regulator-name = "vgp5";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3000000>;
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vgp6_reg: ldo_vgp6 {
- regulator-compatible = "ldo_vgp6";
- regulator-name = "vgp6";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-enable-ramp-delay = <218>;
- };
-
- mt6397_vibr_reg: ldo_vibr {
- regulator-compatible = "ldo_vibr";
- regulator-name = "vibr";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-enable-ramp-delay = <218>;
- };
- };
- };
compatible:
enum:
- qcom,qca6390-pmu
+ - qcom,wcn6855-pmu
- qcom,wcn7850-pmu
vdd-supply:
bt-enable-gpios:
maxItems: 1
- description: GPIO line enabling the ATH11K Bluetooth module supplied by the PMU
+ description: GPIO line enabling the Bluetooth module supplied by the PMU
+
+ swctrl-gpios:
+ maxItems: 1
+ description: GPIO line indicating the state of the clock supply to the BT module
clocks:
maxItems: 1
- vddpcie1p3-supply
- vddpcie1p9-supply
- vddio-supply
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,wcn6855-pmu
+ then:
+ required:
+ - vddio-supply
+ - vddaon-supply
+ - vddpmu-supply
+ - vddrfa0p95-supply
+ - vddrfa1p3-supply
+ - vddrfa1p9-supply
+ - vddpcie1p3-supply
+ - vddpcie1p9-supply
- if:
properties:
compatible:
Each SCP core has own cache memory. The SRAM and L1TCM are shared by
cores. The power of cache, SRAM and L1TCM power should be enabled
before booting SCP cores. The size of cache, SRAM, and L1TCM are varied
- on differnt SoCs.
+ on different SoCs.
The SCP cores do not use an MMU, but has a set of registers to
control the translations between 32-bit CPU addresses into system bus
qcom,rpm-msg-ram = <&rpm_msg_ram>;
rpm-requests {
- compatible = "qcom,rpm-msm8996";
+ compatible = "qcom,rpm-msm8996", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
/* ... */
qcom,smd-edge = <15>;
rpm-requests {
- compatible = "qcom,rpm-msm8916";
+ compatible = "qcom,rpm-msm8916", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
/* ... */
};
mboxes = <&apcs_glb 0>;
rpm-requests {
- compatible = "qcom,rpm-qcm2290";
+ compatible = "qcom,rpm-qcm2290", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
/* ... */
};
properties:
compatible:
enum:
+ - qcom,sdx75-mpss-pas
- qcom,sm8550-adsp-pas
- qcom,sm8550-cdsp-pas
- qcom,sm8550-mpss-pas
properties:
compatible:
enum:
+ - qcom,sdx75-mpss-pas
- qcom,sm8650-mpss-pas
then:
properties:
properties:
compatible:
enum:
+ - qcom,sdx75-mpss-pas
- qcom,sm8550-mpss-pas
- qcom,sm8650-mpss-pas
then:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-m4f-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 M4F processor subsystems
+
+maintainers:
+ - Hari Nagalla <hnagalla@ti.com>
+ - Mathieu Poirier <mathieu.poirier@linaro.org>
+
+description: |
+ Some K3 family SoCs have Arm Cortex M4F cores. AM64x is a SoC in K3
+ family with a M4F core. Typically safety oriented applications may use
+ the M4F core in isolation without an IPC. Where as some industrial and
+ home automation applications, may use the M4F core as a remote processor
+ with IPC communications.
+
+$ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,am64-m4fss
+
+ power-domains:
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ reg:
+ items:
+ - description: IRAM internal memory region
+ - description: DRAM internal memory region
+
+ reg-names:
+ items:
+ - const: iram
+ - const: dram
+
+ resets:
+ maxItems: 1
+
+ firmware-name:
+ maxItems: 1
+ description: Name of firmware to load for the M4F core
+
+ mboxes:
+ description:
+ OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+ communication with the remote processor. This property should match
+ with the sub-mailbox node used in the firmware image.
+ maxItems: 1
+
+ memory-region:
+ description:
+ phandle to the reserved memory nodes to be associated with the
+ remoteproc device. Optional memory regions available for firmware
+ specific purposes.
+ (see reserved-memory/reserved-memory.yaml in dtschema project)
+ maxItems: 8
+ items:
+ - description: regions used for DMA allocations like vrings, vring buffers
+ and memory dedicated to firmware's specific purposes.
+ additionalItems: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,sci-proc-ids
+ - resets
+ - firmware-name
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9cb00000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_m4fss_memory_region: m4f-memory@9cc00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9cc00000 0x00 0xe00000>;
+ no-map;
+ };
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mailbox0_cluster0: mailbox-0 {
+ #mbox-cells = <1>;
+ };
+
+ remoteproc@5000000 {
+ compatible = "ti,am64-m4fss";
+ reg = <0x00 0x5000000 0x00 0x30000>,
+ <0x00 0x5040000 0x00 0x10000>;
+ reg-names = "iram", "dram";
+ resets = <&k3_reset 9 1>;
+ firmware-name = "am62-mcu-m4f0_0-fw";
+ mboxes = <&mailbox0_cluster0>, <&mbox_m4_0>;
+ memory-region = <&mcu_m4fss_dma_memory_region>,
+ <&mcu_m4fss_memory_region>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <9>;
+ ti,sci-proc-ids = <0x18 0xff>;
+ };
+ };
patternProperties:
"^r(.*)@[0-9a-f]+$":
type: object
+ additionalProperties: false
description: |
The RPU is located in the Low Power Domain of the Processor Subsystem.
Each processor includes separate L1 instruction and data caches and
- amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
- amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
- amlogic,c3-reset # Reset Controller on C3 and compatible SoCs
+ - amlogic,t7-reset
reg:
maxItems: 1
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/reset/mobileye,eyeq5-reset.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mobileye EyeQ5 reset controller
-
-description:
- The EyeQ5 reset driver handles three reset domains. Its registers live in a
- shared region called OLB.
-
-maintainers:
- - Grégory Clement <gregory.clement@bootlin.com>
- - Théo Lebrun <theo.lebrun@bootlin.com>
- - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
-
-properties:
- compatible:
- const: mobileye,eyeq5-reset
-
- reg:
- maxItems: 3
-
- reg-names:
- items:
- - const: d0
- - const: d1
- - const: d2
-
- "#reset-cells":
- const: 2
- description:
- The first cell is the domain (0 to 2 inclusive) and the second one is the
- reset index inside that domain.
-
-required:
- - compatible
- - reg
- - reg-names
- - "#reset-cells"
-
-additionalProperties: false
- renesas,r8a7745-rst # RZ/G1E
- renesas,r8a77470-rst # RZ/G1C
- renesas,r8a774a1-rst # RZ/G2M
+ - renesas,r8a774a3-rst # RZ/G2M v3.0
- renesas,r8a774b1-rst # RZ/G2N
- renesas,r8a774c0-rst # RZ/G2E
- renesas,r8a774e1-rst # RZ/G2H
minItems: 1
maxItems: 2
- clock-names: true
+ clock-names:
+ minItems: 1
+ maxItems: 2
resets:
minItems: 1
maxItems: 2
- reset-names: true
+ reset-names:
+ minItems: 1
+ maxItems: 2
allOf:
- if:
memory types as ratified in the 20191213 version of the privileged
ISA specification.
+ - const: svvptc
+ description:
+ The standard Svvptc supervisor-level extension for
+ address-translation cache behaviour with respect to invalid entries
+ as ratified at commit 4a69197e5617 ("Update to ratified state") of
+ riscv-svvptc.
+
- const: zacas
description: |
The Zacas extension for Atomic Compare-and-Swap (CAS) instructions
- enum:
- sophgo,huashan-pi
- const: sophgo,cv1812h
+ - items:
+ - enum:
+ - sipeed,licheerv-nano-b
+ - const: sipeed,licheerv-nano
+ - const: sophgo,sg2002
- items:
- enum:
- milkv,pioneer
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/rockchip,rk3568-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3568 TRNG
+
+description: True Random Number Generator on Rockchip RK3568 SoC
+
+maintainers:
+ - Aurelien Jarno <aurelien@aurel32.net>
+ - Daniel Golle <daniel@makrotopia.org>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3568-rng
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: TRNG clock
+ - description: TRNG AHB clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: ahb
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3568-cru.h>
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rng@fe388000 {
+ compatible = "rockchip,rk3568-rng";
+ reg = <0x0 0xfe388000 0x0 0x4000>;
+ clocks = <&cru CLK_TRNG_NS>, <&cru HCLK_TRNG_NS>;
+ clock-names = "core", "ahb";
+ resets = <&cru SRST_TRNG_NS>;
+ };
+ };
+
+...
minItems: 1
description:
phandle to rcpm node, Please refer
- Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+ Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
interrupts:
maxItems: 1
+ "#clock-cells":
+ const: 0
+
trickle-resistor-ohms:
enum:
- 3000
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/sprd,sc2731-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 Real Time Clock
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+ compatible:
+ const: sprd,sc2731-rtc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: rtc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@280 {
+ compatible = "sprd,sc2731-rtc";
+ reg = <0x280>;
+ interrupt-parent = <&sc2731_pmic>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+...
+++ /dev/null
-Spreadtrum SC27xx Real Time Clock
-
-Required properties:
-- compatible: should be "sprd,sc2731-rtc".
-- reg: address offset of rtc register.
-- interrupts: rtc alarm interrupt.
-
-Example:
-
- sc2731_pmic: pmic@0 {
- compatible = "sprd,sc2731";
- reg = <0>;
- spi-max-frequency = <26000000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- rtc@280 {
- compatible = "sprd,sc2731-rtc";
- reg = <0x280>;
- interrupt-parent = <&sc2731_pmic>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
override default rtc_ck parent clock phandle of the new parent clock of rtc_ck
maxItems: 1
+patternProperties:
+ "^rtc-[a-z]+-[0-9]+$":
+ type: object
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+ description: |
+ Configuration of STM32 RTC pins description. STM32 RTC is able to output
+ some signals on specific pins:
+ - LSCO (Low Speed Clock Output) that allow to output LSE clock on a pin.
+ - Alarm out that allow to send a pulse on a pin when alarm A of the RTC
+ expires.
+ additionalProperties: false
+ properties:
+ function:
+ enum:
+ - lsco
+ - alarm-a
+ pins:
+ enum:
+ - out1
+ - out2
+ - out2_rmp
+
allOf:
- if:
properties:
clock-names: false
+ patternProperties:
+ "^rtc-[a-z]+-[0-9]+$": false
+
required:
- st,syscfg
minItems: 2
maxItems: 2
+ patternProperties:
+ "^rtc-[a-z]+-[0-9]+$": false
+
required:
- clock-names
- st,syscfg
- dallas,ds1672
# Extremely Accurate I²C RTC with Integrated Crystal and SRAM
- dallas,ds3232
+ # SD2405AL Real-Time Clock
+ - dfrobot,sd2405al
# EM Microelectronic EM3027 RTC
- emmicro,em3027
# I2C-BUS INTERFACE REAL TIME CLOCK MODULE
- epson,rx8010
# I2C-BUS INTERFACE REAL TIME CLOCK MODULE
- - epson,rx8025
- epson,rx8035
# I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
- epson,rx8111
- epson,rx8581
# Android Goldfish Real-time Clock
- google,goldfish-rtc
- # Intersil ISL1208 Low Power RTC with Battery Backed SRAM
- - isil,isl1208
- # Intersil ISL1218 Low Power RTC with Battery Backed SRAM
- - isil,isl1218
# Mvebu Real-time Clock
- marvell,orion-rtc
# Maxim DS1742/DS1743 Real-time Clock
- microcrystal,rv8523
# NXP LPC32xx SoC Real-time Clock
- nxp,lpc3220-rtc
- # Real-time Clock Module
- - pericom,pt7c4338
# I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
- ricoh,r2025sd
# I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
clock-frequency: true
current-speed: true
overrun-throttle-ms: true
+ wakeup-source: true
required:
- compatible
- const: atmel,at91sam9260-dbgu
- const: atmel,at91sam9260-usart
- items:
- - const: microchip,sam9x60-usart
+ - enum:
+ - microchip,sam9x60-usart
+ - microchip,sam9x7-usart
- const: atmel,at91sam9260-usart
- items:
- const: microchip,sam9x60-dbgu
- const: microchip,sam9x60-usart
- const: atmel,at91sam9260-dbgu
- const: atmel,at91sam9260-usart
+ - items:
+ - const: microchip,sam9x7-dbgu
+ - const: atmel,at91sam9260-dbgu
+ - const: microchip,sam9x7-usart
+ - const: atmel,at91sam9260-usart
reg:
maxItems: 1
- mediatek,mt7622-uart
- mediatek,mt7623-uart
- mediatek,mt7629-uart
+ - mediatek,mt7981-uart
- mediatek,mt7986-uart
- mediatek,mt7988-uart
- mediatek,mt8127-uart
we use nvidia,adjust-baud-rates.
As an example, consider there is deviation observed in TX for baud rates as listed below. 0
- to 9600 has 1% deviation 9600 to 115200 2% deviation. This slight deviation is expcted and
+ to 9600 has 1% deviation 9600 to 115200 2% deviation. This slight deviation is expected and
Tegra UART is expected to handle it. Due to the issue stated above, baud rate on Tegra UART
should be set equal to or above deviation observed for avoiding frame errors. Property
should be set like this:
- items:
- enum:
- renesas,scif-r8a774a1 # RZ/G2M
+ - renesas,scif-r8a774a3 # RZ/G2M v3.0
- renesas,scif-r8a774b1 # RZ/G2N
- renesas,scif-r8a774c0 # RZ/G2E
- renesas,scif-r8a774e1 # RZ/G2H
maxItems: 5
clock-names:
- description: N = 0 is allowed for SoCs without internal baud clock mux.
minItems: 2
- items:
- - const: uart
- - pattern: '^clk_uart_baud[0-3]$'
- - pattern: '^clk_uart_baud[0-3]$'
- - pattern: '^clk_uart_baud[0-3]$'
- - pattern: '^clk_uart_baud[0-3]$'
+ maxItems: 5
dmas:
items:
compatible:
contains:
enum:
- - samsung,s5pv210-uart
+ - samsung,s3c6400-uart
then:
properties:
clocks:
- minItems: 2
+ minItems: 3
maxItems: 3
+
+ clock-names:
+ items:
+ - const: uart
+ - const: clk_uart_baud2
+ - const: clk_uart_baud3
+
+ else:
+ properties:
clock-names:
minItems: 2
items:
- const: uart
- - pattern: '^clk_uart_baud[0-1]$'
- - pattern: '^clk_uart_baud[0-1]$'
+ - const: clk_uart_baud0
+ - const: clk_uart_baud1
+ - const: clk_uart_baud2
+ - const: clk_uart_baud3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,s5pv210-uart
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+
+ clock-names:
+ minItems: 3
+ maxItems: 3
- if:
properties:
properties:
clocks:
maxItems: 2
+
clock-names:
- items:
- - const: uart
- - const: clk_uart_baud0
+ maxItems: 2
- if:
properties:
properties:
reg-io-width: false
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ maxItems: 2
+
unevaluatedProperties: false
examples:
<&clocks SCLK_UART>;
samsung,uart-fifosize = <16>;
};
+ - |
+ #include <dt-bindings/clock/google,gs101.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ serial_0: serial@10a00000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10a00000 0xc0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart0_bus>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <256>;
+ };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/serial-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial-attached Devices
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+ - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description:
+ Devices connected over serial/UART, expressed as children of a serial
+ controller, might need similar properties, e.g. for configuring the baud
+ rate.
+
+properties:
+ max-speed:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The maximum baud rate the device operates at.
+ This should only be present if the maximum is less than the slave
+ device can support. For example, a particular board has some
+ signal quality issue or the host processor can't support higher
+ baud rates.
+
+ current-speed:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The current baud rate the device operates at.
+ This should only be present in case a driver has no chance to know
+ the baud rate of the slave device.
+ Examples:
+ * device supports auto-baud
+ * the rate is setup by a bootloader and there is no way to reset
+ the device
+ * device baud rate is configured by its firmware but there is no
+ way to request the actual settings
+
+additionalProperties: true
TX FIFO threshold configuration (in bytes).
patternProperties:
- "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$":
+ "^(bluetooth|bluetooth-gnss|embedded-controller|gnss|gps|mcu|onewire)$":
if:
type: object
then:
+ additionalProperties: true
+ $ref: serial-peripheral-props.yaml#
description:
Serial attached devices shall be a child node of the host UART device
the slave device is attached to. It is expected that the attached
description:
Compatible of the device connected to the serial port.
- max-speed:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- The maximum baud rate the device operates at.
- This should only be present if the maximum is less than the slave
- device can support. For example, a particular board has some
- signal quality issue or the host processor can't support higher
- baud rates.
-
- current-speed:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- The current baud rate the device operates at.
- This should only be present in case a driver has no chance to know
- the baud rate of the slave device.
- Examples:
- * device supports auto-baud
- * the rate is setup by a bootloader and there is no way to reset
- the device
- * device baud rate is configured by its firmware but there is no
- way to request the actual settings
-
required:
- compatible
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2711-avs-monitor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AVS Monitor
+
+maintainers:
+ - Stefan Wahren <wahrenst@gmx.net>
+
+properties:
+ compatible:
+ items:
+ - const: brcm,bcm2711-avs-monitor
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ thermal:
+ $ref: /schemas/thermal/brcm,avs-ro-thermal.yaml
+ description: Broadcom AVS ring oscillator thermal
+
+required:
+ - compatible
+ - reg
+ - thermal
+
+additionalProperties: false
+
+examples:
+ - |
+ avs-monitor@7d5d2000 {
+ compatible = "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd";
+ reg = <0x7d5d2000 0xf00>;
+
+ thermal: thermal {
+ compatible = "brcm,bcm2711-thermal";
+ #thermal-sensor-cells = <0>;
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/cirrus/cirrus,ep9301-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP93xx Platforms System Controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+description: |
+ Central resources are controlled by a set of software-locked registers,
+ which can be used to prevent accidental accesses. Syscon generates
+ the various bus and peripheral clocks and controls the system startup
+ configuration.
+
+ The System Controller (Syscon) provides:
+ - Clock control
+ - Power management
+ - System configuration management
+
+ Syscon registers are common for all EP93xx SoC's, through some actual peripheral
+ may be missing depending on actual SoC model.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - cirrus,ep9302-syscon
+ - cirrus,ep9307-syscon
+ - cirrus,ep9312-syscon
+ - cirrus,ep9315-syscon
+ - const: cirrus,ep9301-syscon
+ - const: syscon
+ - items:
+ - const: cirrus,ep9301-syscon
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ clocks:
+ items:
+ - description: reference clock
+
+patternProperties:
+ '^pins-':
+ type: object
+ description: pin node
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+
+ properties:
+ function:
+ enum: [ spi, ac97, i2s, pwm, keypad, pata, lcd, gpio ]
+
+ groups:
+ enum: [ ssp, ac97, i2s_on_ssp, i2s_on_ac97, pwm1, gpio1agrp,
+ gpio2agrp, gpio3agrp, gpio4agrp, gpio6agrp, gpio7agrp,
+ rasteronsdram0grp, rasteronsdram3grp, keypadgrp, idegrp ]
+
+ required:
+ - function
+ - groups
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@80930000 {
+ compatible = "cirrus,ep9301-syscon", "syscon";
+ reg = <0x80930000 0x1000>;
+
+ #clock-cells = <1>;
+ clocks = <&xtali>;
+
+ spi_default_pins: pins-spi {
+ function = "spi";
+ groups = "ssp";
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-tsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC QE Time-slot assigner (TSA) controller
+
+maintainers:
+ - Herve Codina <herve.codina@bootlin.com>
+
+description:
+ The TSA is the time-slot assigner that can be found on some PowerQUICC SoC.
+ Its purpose is to route some TDM time-slots to other internal serial
+ controllers.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,mpc8321-tsa
+ - const: fsl,qe-tsa
+
+ reg:
+ items:
+ - description: SI (Serial Interface) register base
+ - description: SI RAM base
+
+ reg-names:
+ items:
+ - const: si_regs
+ - const: si_ram
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ '^tdm@[0-3]$':
+ description:
+ The TDM managed by this controller
+ type: object
+
+ additionalProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 3
+ description:
+ The TDM number for this TDM, 0 for TDMa, 1 for TDMb, 2 for TDMc and 3
+ for TDMd.
+
+ fsl,common-rxtx-pins:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The hardware can use four dedicated pins for Tx clock, Tx sync, Rx
+ clock and Rx sync or use only two pins, Tx/Rx clock and Tx/Rx sync.
+ Without the 'fsl,common-rxtx-pins' property, the four pins are used.
+ With the 'fsl,common-rxtx-pins' property, two pins are used.
+
+ clocks:
+ minItems: 2
+ items:
+ - description: Receive sync clock
+ - description: Receive data clock
+ - description: Transmit sync clock
+ - description: Transmit data clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: rsync
+ - const: rclk
+ - const: tsync
+ - const: tclk
+
+ fsl,rx-frame-sync-delay-bits:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Receive frame sync delay in number of bits.
+ Indicates the delay between the Rx sync and the first bit of the Rx
+ frame.
+
+ fsl,tx-frame-sync-delay-bits:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Transmit frame sync delay in number of bits.
+ Indicates the delay between the Tx sync and the first bit of the Tx
+ frame.
+
+ fsl,clock-falling-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Data is sent on falling edge of the clock (and received on the rising
+ edge). If not present, data is sent on the rising edge (and received
+ on the falling edge).
+
+ fsl,fsync-rising-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Frame sync pulses are sampled with the rising edge of the channel
+ clock. If not present, pulses are sampled with the falling edge.
+
+ fsl,fsync-active-low:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Frame sync signals are active on low logic level.
+ If not present, sync signals are active on high level.
+
+ fsl,double-speed-clock:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The channel clock is twice the data rate.
+
+ patternProperties:
+ '^fsl,[rt]x-ts-routes$':
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ A list of tuple that indicates the Tx or Rx time-slots routes.
+ items:
+ items:
+ - description:
+ The number of time-slots
+ minimum: 1
+ maximum: 64
+ - description: |
+ The source (Tx) or destination (Rx) serial interface
+ (dt-bindings/soc/qe-fsl,tsa.h defines these values)
+ - 0: No destination
+ - 1: UCC1
+ - 2: UCC2
+ - 3: UCC3
+ - 4: UCC4
+ - 5: UCC5
+ enum: [0, 1, 2, 3, 4, 5]
+ minItems: 1
+ maxItems: 64
+
+ allOf:
+ # If fsl,common-rxtx-pins is present, only 2 clocks are needed.
+ # Else, the 4 clocks must be present.
+ - if:
+ required:
+ - fsl,common-rxtx-pins
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+ clock-names:
+ maxItems: 2
+ else:
+ properties:
+ clocks:
+ minItems: 4
+ clock-names:
+ minItems: 4
+
+ required:
+ - reg
+ - clocks
+ - clock-names
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/qe-fsl,tsa.h>
+
+ tsa@ae0 {
+ compatible = "fsl,mpc8321-tsa", "fsl,qe-tsa";
+ reg = <0xae0 0x10>,
+ <0xc00 0x200>;
+ reg-names = "si_regs", "si_ram";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tdm@0 {
+ /* TDMa */
+ reg = <0>;
+
+ clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
+ clock-names = "rsync", "rclk";
+
+ fsl,common-rxtx-pins;
+ fsl,fsync-rising-edge;
+
+ fsl,tx-ts-routes = <2 0>, /* TS 0..1 */
+ <24 FSL_QE_TSA_UCC4>, /* TS 2..25 */
+ <1 0>, /* TS 26 */
+ <5 FSL_QE_TSA_UCC3>; /* TS 27..31 */
+
+ fsl,rx-ts-routes = <2 0>, /* TS 0..1 */
+ <24 FSL_QE_TSA_UCC4>, /* 2..25 */
+ <1 0>, /* TS 26 */
+ <5 FSL_QE_TSA_UCC3>; /* TS 27..31 */
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ucc-qmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC QE QUICC Multichannel Controller (QMC)
+
+maintainers:
+ - Herve Codina <herve.codina@bootlin.com>
+
+description:
+ The QMC (QUICC Multichannel Controller) emulates up to 64 channels within one
+ serial controller using the same TDM physical interface routed from TSA.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,mpc8321-ucc-qmc
+ - const: fsl,qe-ucc-qmc
+
+ reg:
+ items:
+ - description: UCC (Unified communication controller) register base
+ - description: Dual port ram base
+
+ reg-names:
+ items:
+ - const: ucc_regs
+ - const: dpram
+
+ interrupts:
+ maxItems: 1
+ description: UCC interrupt line in the QE interrupt controller
+
+ fsl,tsa-serial:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to TSA node
+ - enum: [1, 2, 3, 4, 5]
+ description: |
+ TSA serial interface (dt-bindings/soc/qe-fsl,tsa.h defines these
+ values)
+ - 1: UCC1
+ - 2: UCC2
+ - 3: UCC3
+ - 4: UCC4
+ - 5: UCC5
+ description:
+ Should be a phandle/number pair. The phandle to TSA node and the TSA
+ serial interface to use.
+
+ fsl,soft-qmc:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Soft QMC firmware name to load. If this property is omitted, no firmware
+ are used.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ '^channel@([0-9]|[1-5][0-9]|6[0-3])$':
+ description:
+ A channel managed by this controller
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,mpc8321-ucc-qmc-hdlc
+ - const: fsl,qe-ucc-qmc-hdlc
+ - const: fsl,qmc-hdlc
+
+ reg:
+ minimum: 0
+ maximum: 63
+ description:
+ The channel number
+
+ fsl,operational-mode:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [transparent, hdlc]
+ default: transparent
+ description: |
+ The channel operational mode
+ - hdlc: The channel handles HDLC frames
+ - transparent: The channel handles raw data without any processing
+
+ fsl,reverse-data:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The bit order as seen on the channels is reversed,
+ transmitting/receiving the MSB of each octet first.
+ This flag is used only in 'transparent' mode.
+
+ fsl,tx-ts-mask:
+ $ref: /schemas/types.yaml#/definitions/uint64
+ description:
+ Channel assigned Tx time-slots within the Tx time-slots routed by the
+ TSA to this cell.
+
+ fsl,rx-ts-mask:
+ $ref: /schemas/types.yaml#/definitions/uint64
+ description:
+ Channel assigned Rx time-slots within the Rx time-slots routed by the
+ TSA to this cell.
+
+ fsl,framer:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the framer node. The framer is in charge of an E1/T1 line
+ interface connected to the TDM bus. It can be used to get the E1/T1 line
+ status such as link up/down.
+
+ allOf:
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ const: fsl,qmc-hdlc
+ then:
+ properties:
+ fsl,framer: false
+
+ required:
+ - reg
+ - fsl,tx-ts-mask
+ - fsl,rx-ts-mask
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - fsl,tsa-serial
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/qe-fsl,tsa.h>
+
+ qmc@a60 {
+ compatible = "fsl,mpc8321-ucc-qmc", "fsl,qe-ucc-qmc";
+ reg = <0x3200 0x200>,
+ <0x10000 0x1000>;
+ reg-names = "ucc_regs", "dpram";
+ interrupts = <35>;
+ interrupt-parent = <&qeic>;
+ fsl,soft-qmc = "fsl_qe_ucode_qmc_8321_11.bin";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsl,tsa-serial = <&tsa FSL_QE_TSA_UCC4>;
+
+ channel@16 {
+ /* Ch16 : First 4 even TS from all routed from TSA */
+ reg = <16>;
+ fsl,operational-mode = "transparent";
+ fsl,reverse-data;
+ fsl,tx-ts-mask = <0x00000000 0x000000aa>;
+ fsl,rx-ts-mask = <0x00000000 0x000000aa>;
+ };
+
+ channel@17 {
+ /* Ch17 : First 4 odd TS from all routed from TSA */
+ reg = <17>;
+ fsl,operational-mode = "transparent";
+ fsl,reverse-data;
+ fsl,tx-ts-mask = <0x00000000 0x00000055>;
+ fsl,rx-ts-mask = <0x00000000 0x00000055>;
+ };
+
+ channel@19 {
+ /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */
+ compatible = "fsl,mpc8321-ucc-qmc-hdlc",
+ "fsl,qe-ucc-qmc-hdlc",
+ "fsl,qmc-hdlc";
+ reg = <19>;
+ fsl,operational-mode = "hdlc";
+ fsl,tx-ts-mask = <0x00000000 0x0000ff00>;
+ fsl,rx-ts-mask = <0x00000000 0x0000ff00>;
+ fsl,framer = <&framer>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: High-Level Data Link Control(HDLC)
+
+description: HDLC part in Universal communication controllers (UCCs)
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,ucc-hdlc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ cell-index:
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ rx-clock-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ oneOf:
+ - pattern: "^brg([0-9]|1[0-6])$"
+ - pattern: "^clk([0-9]|1[0-9]|2[0-4])$"
+
+ tx-clock-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ oneOf:
+ - pattern: "^brg([0-9]|1[0-6])$"
+ - pattern: "^clk([0-9]|1[0-9]|2[0-4])$"
+
+ fsl,tdm-interface:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Specify that hdlc is based on tdm-interface
+
+ fsl,rx-sync-clock:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: rx-sync
+ enum:
+ - none
+ - rsync_pin
+ - brg9
+ - brg10
+ - brg11
+ - brg13
+ - brg14
+ - brg15
+
+ fsl,tx-sync-clock:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: tx-sync
+ enum:
+ - none
+ - tsync_pin
+ - brg9
+ - brg10
+ - brg11
+ - brg13
+ - brg14
+ - brg15
+
+ fsl,tdm-framer-type:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: required for tdm interface
+ enum: [e1, t1]
+
+ fsl,tdm-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: number of TDM ID
+
+ fsl,tx-timeslot-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ required for tdm interface.
+ time slot mask for TDM operation. Indicates which time
+ slots used for transmitting and receiving.
+
+ fsl,rx-timeslot-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ required for tdm interface.
+ time slot mask for TDM operation. Indicates which time
+ slots used for transmitting and receiving.
+
+ fsl,siram-entry-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ required for tdm interface
+ Must be 0,2,4...64. the number of TDM entry.
+
+ fsl,tdm-internal-loopback:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ optional for tdm interface
+ Internal loopback connecting on TDM layer.
+
+ fsl,hmask:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description: |
+ HDLC address recognition. Set to zero to disable
+ address filtering of packets:
+ fsl,hmask = /bits/ 16 <0x0000>;
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ communication@2000 {
+ compatible = "fsl,ucc-hdlc";
+ reg = <0x2000 0x200>;
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot-mask = <0xfffffffe>;
+ fsl,rx-timeslot-mask = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
+
+ - |
+ communication@2000 {
+ compatible = "fsl,ucc-hdlc";
+ reg = <0x2000 0x200>;
+ rx-clock-name = "brg1";
+ tx-clock-name = "brg1";
+ };
+++ /dev/null
-* Network
-
-Currently defined compatibles:
-- fsl,cpm1-scc-enet
-- fsl,cpm2-scc-enet
-- fsl,cpm1-fec-enet
-- fsl,cpm2-fcc-enet (third resource is GFEMR)
-- fsl,qe-enet
-
-Example:
-
- ethernet@11300 {
- compatible = "fsl,mpc8272-fcc-enet",
- "fsl,cpm2-fcc-enet";
- reg = <11300 20 8400 100 11390 1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <20 8>;
- interrupt-parent = <&PIC>;
- phy-handle = <&PHY0>;
- fsl,cpm-command = <12000300>;
- };
-
-* MDIO
-
-Currently defined compatibles:
-fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
-fsl,cpm2-mdio-bitbang (reg is port C registers)
-
-Properties for fsl,cpm2-mdio-bitbang:
-fsl,mdio-pin : pin of port C controlling mdio data
-fsl,mdc-pin : pin of port C controlling mdio clock
-
-Example:
- mdio@10d40 {
- compatible = "fsl,mpc8272ads-mdio-bitbang",
- "fsl,mpc8272-mdio-bitbang",
- "fsl,cpm2-mdio-bitbang";
- reg = <10d40 14>;
- #address-cells = <1>;
- #size-cells = <0>;
- fsl,mdio-pin = <12>;
- fsl,mdc-pin = <13>;
- };
-
-* HDLC
-
-Currently defined compatibles:
-- fsl,ucc-hdlc
-
-Properties for fsl,ucc-hdlc:
-- rx-clock-name
-- tx-clock-name
- Usage: required
- Value type: <string>
- Definition : Must be "brg1"-"brg16" for internal clock source,
- Must be "clk1"-"clk24" for external clock source.
-
-- fsl,tdm-interface
- Usage: optional
- Value type: <empty>
- Definition : Specify that hdlc is based on tdm-interface
-
-The property below is dependent on fsl,tdm-interface:
-- fsl,rx-sync-clock
- Usage: required
- Value type: <string>
- Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15".
-
-- fsl,tx-sync-clock
- Usage: required
- Value type: <string>
- Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15".
-
-- fsl,tdm-framer-type
- Usage: required for tdm interface
- Value type: <string>
- Definition : "e1" or "t1".Now e1 and t1 are used, other framer types
- are not supported.
-
-- fsl,tdm-id
- Usage: required for tdm interface
- Value type: <u32>
- Definition : number of TDM ID
-
-- fsl,tx-timeslot-mask
-- fsl,rx-timeslot-mask
- Usage: required for tdm interface
- Value type: <u32>
- Definition : time slot mask for TDM operation. Indicates which time
- slots used for transmitting and receiving.
-
-- fsl,siram-entry-id
- Usage: required for tdm interface
- Value type: <u32>
- Definition : Must be 0,2,4...64. the number of TDM entry.
-
-- fsl,tdm-internal-loopback
- usage: optional for tdm interface
- value type: <empty>
- Definition : Internal loopback connecting on TDM layer.
-- fsl,hmask
- usage: optional
- Value type: <u16>
- Definition: HDLC address recognition. Set to zero to disable
- address filtering of packets:
- fsl,hmask = /bits/ 16 <0x0000>;
-
-Example for tdm interface:
-
- ucc@2000 {
- compatible = "fsl,ucc-hdlc";
- rx-clock-name = "clk8";
- tx-clock-name = "clk9";
- fsl,rx-sync-clock = "rsync_pin";
- fsl,tx-sync-clock = "tsync_pin";
- fsl,tx-timeslot-mask = <0xfffffffe>;
- fsl,rx-timeslot-mask = <0xfffffffe>;
- fsl,tdm-framer-type = "e1";
- fsl,tdm-id = <0>;
- fsl,siram-entry-id = <0>;
- fsl,tdm-interface;
- };
-
-Example for hdlc without tdm interface:
-
- ucc@2000 {
- compatible = "fsl,ucc-hdlc";
- rx-clock-name = "brg1";
- tx-clock-name = "brg1";
- };
- fsl,ls1028a-scfg
- fsl,ls1043a-scfg
- fsl,ls1046a-scfg
+ - fsl,ls1088a-isc
+ - fsl,ls2080a-isc
+ - fsl,lx2160a-isc
- const: syscon
reg:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,rcpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Run Control and Power Management
+
+description:
+ The RCPM performs all device-level tasks associated with device run control
+ and power management.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,p2041-rcpm
+ - fsl,p3041-rcpm
+ - fsl,p4080-rcpm
+ - fsl,p5020-rcpm
+ - fsl,p5040-rcpm
+ - const: fsl,qoriq-rcpm-1.0
+ - items:
+ - enum:
+ - fsl,b4420-rcpm
+ - fsl,b4860-rcpm
+ - fsl,t4240-rcpm
+ - const: fsl,qoriq-rcpm-2.0
+ - items:
+ - enum:
+ - fsl,t1040-rcpm
+ - const: fsl,qoriq-rcpm-2.1
+ - items:
+ - enum:
+ - fsl,ls1012a-rcpm
+ - fsl,ls1021a-rcpm
+ - fsl,ls1028a-rcpm
+ - fsl,ls1043a-rcpm
+ - fsl,ls1046a-rcpm
+ - fsl,ls1088a-rcpm
+ - fsl,ls208xa-rcpm
+ - fsl,lx2160a-rcpm
+ - const: fsl,qoriq-rcpm-2.1+
+
+ reg:
+ maxItems: 1
+
+ "#fsl,rcpm-wakeup-cells":
+ description: |
+ The number of IPPDEXPCR register cells in the
+ fsl,rcpm-wakeup property.
+
+ Freescale RCPM Wakeup Source Device Tree Bindings
+
+ Required fsl,rcpm-wakeup property should be added to a device node if
+ the device can be used as a wakeup source.
+
+ fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
+ register cells. The number of IPPDEXPCR register cells is defined in
+ "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
+ the bit mask that should be set in IPPDEXPCR0, and the second register
+ cell is for IPPDEXPCR1, and so on.
+
+ Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a
+ mechanism for keeping certain blocks awake during STANDBY and MEM, in
+ order to use them as wake-up sources.
+
+ little-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ RCPM register block is Little Endian. Without it RCPM
+ will be Big Endian (default case).
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ global-utilities@e2000 {
+ compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
+ reg = <0xe2000 0x1000>;
+ #fsl,rcpm-wakeup-cells = <2>;
+ };
+++ /dev/null
-* Run Control and Power Management
--------------------------------------------
-The RCPM performs all device-level tasks associated with device run control
-and power management.
-
-Required properites:
- - reg : Offset and length of the register set of the RCPM block.
- - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
- fsl,rcpm-wakeup property.
- - compatible : Must contain a chip-specific RCPM block compatible string
- and (if applicable) may contain a chassis-version RCPM compatible
- string. Chip-specific strings are of the form "fsl,<chip>-rcpm",
- such as:
- * "fsl,p2041-rcpm"
- * "fsl,p5020-rcpm"
- * "fsl,t4240-rcpm"
-
- Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>",
- such as:
- * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
- * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
- * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
- * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
-
-All references to "1.0" and "2.0" refer to the QorIQ chassis version to
-which the chip complies.
-Chassis Version Example Chips
---------------- -------------------------------
-1.0 p4080, p5020, p5040, p2041, p3041
-2.0 t4240, b4860, b4420
-2.1 t1040,
-2.1+ ls1021a, ls1012a, ls1043a, ls1046a
-
-Optional properties:
- - little-endian : RCPM register block is Little Endian. Without it RCPM
- will be Big Endian (default case).
-
-Example:
-The RCPM node for T4240:
- rcpm: global-utilities@e2000 {
- compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
- reg = <0xe2000 0x1000>;
- #fsl,rcpm-wakeup-cells = <2>;
- };
-
-* Freescale RCPM Wakeup Source Device Tree Bindings
--------------------------------------------
-Required fsl,rcpm-wakeup property should be added to a device node if the device
-can be used as a wakeup source.
-
- - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
- register cells. The number of IPPDEXPCR register cells is defined in
- "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
- the bit mask that should be set in IPPDEXPCR0, and the second register
- cell is for IPPDEXPCR1, and so on.
-
- Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a
- mechanism for keeping certain blocks awake during STANDBY and MEM, in
- order to use them as wake-up sources.
-
-Example:
- lpuart0: serial@2950000 {
- compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2950000 0x0 0x1000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>;
- };
- qcom,sm8450-pmic-glink
- qcom,sm8550-pmic-glink
- const: qcom,pmic-glink
+ - items:
+ - enum:
+ - qcom,sm7325-pmic-glink
+ - const: qcom,qcm6490-pmic-glink
+ - const: qcom,pmic-glink
- items:
- enum:
- qcom,sm8650-pmic-glink
properties:
compatible:
- enum:
- - qcom,rpm-apq8084
- - qcom,rpm-ipq6018
- - qcom,rpm-ipq9574
- - qcom,rpm-mdm9607
- - qcom,rpm-msm8226
- - qcom,rpm-msm8610
- - qcom,rpm-msm8909
- - qcom,rpm-msm8916
- - qcom,rpm-msm8917
- - qcom,rpm-msm8936
- - qcom,rpm-msm8937
- - qcom,rpm-msm8952
- - qcom,rpm-msm8953
- - qcom,rpm-msm8974
- - qcom,rpm-msm8976
- - qcom,rpm-msm8994
- - qcom,rpm-msm8996
- - qcom,rpm-msm8998
- - qcom,rpm-qcm2290
- - qcom,rpm-qcs404
- - qcom,rpm-sdm660
- - qcom,rpm-sm6115
- - qcom,rpm-sm6125
- - qcom,rpm-sm6375
+ oneOf:
+ - items:
+ - enum:
+ - qcom,rpm-apq8084
+ - qcom,rpm-mdm9607
+ - qcom,rpm-msm8226
+ - qcom,rpm-msm8610
+ - qcom,rpm-msm8909
+ - qcom,rpm-msm8916
+ - qcom,rpm-msm8917
+ - qcom,rpm-msm8936
+ - qcom,rpm-msm8937
+ - qcom,rpm-msm8952
+ - qcom,rpm-msm8953
+ - qcom,rpm-msm8974
+ - qcom,rpm-msm8976
+ - qcom,rpm-msm8994
+ - const: qcom,smd-rpm
+ - items:
+ - enum:
+ - qcom,rpm-ipq6018
+ - qcom,rpm-ipq9574
+ - qcom,rpm-msm8996
+ - qcom,rpm-msm8998
+ - qcom,rpm-qcm2290
+ - qcom,rpm-qcs404
+ - qcom,rpm-sdm660
+ - qcom,rpm-sm6115
+ - qcom,rpm-sm6125
+ - qcom,rpm-sm6375
+ - const: qcom,glink-smd-rpm
clock-controller:
$ref: /schemas/clock/qcom,rpmcc.yaml#
properties:
compatible:
contains:
- enum:
- - qcom,rpm-apq8084
- - qcom,rpm-mdm9607
- - qcom,rpm-msm8226
- - qcom,rpm-msm8610
- - qcom,rpm-msm8909
- - qcom,rpm-msm8916
- - qcom,rpm-msm8917
- - qcom,rpm-msm8936
- - qcom,rpm-msm8937
- - qcom,rpm-msm8952
- - qcom,rpm-msm8953
- - qcom,rpm-msm8974
- - qcom,rpm-msm8976
- - qcom,rpm-msm8994
+ const: qcom,smd-rpm
then:
properties:
qcom,glink-channels: false
qcom,smd-edge = <15>;
rpm-requests {
- compatible = "qcom,rpm-msm8916";
+ compatible = "qcom,rpm-msm8916", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
clock-controller {
qcom,smd-edge = <15>;
rpm-requests {
- compatible = "qcom,rpm-msm8974";
+ compatible = "qcom,rpm-msm8974", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
clock-controller {
- const: hoperun,hihope-rzg2m
- const: renesas,r8a774a1
+ - description: RZ/G2M v3.0 (R8A774A3)
+ items:
+ - enum:
+ - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform
+ - const: renesas,r8a774a3
+
+ - items:
+ - enum:
+ - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
+ - const: hoperun,hihope-rzg2m
+ - const: renesas,r8a774a3
+
- description: RZ/G2N (R8A774B1)
items:
- enum:
- description: RZ/V2H(P) (R9A09G057)
items:
+ - enum:
+ - renesas,rzv2h-evk # RZ/V2H EVK
- enum:
- renesas,r9a09g057h41 # RZ/V2H
- renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support
- rockchip,rk3568-pipe-grf
- rockchip,rk3568-pipe-phy-grf
- rockchip,rk3568-usb2phy-grf
+ - rockchip,rk3576-bigcore-grf
+ - rockchip,rk3576-cci-grf
+ - rockchip,rk3576-gpu-grf
+ - rockchip,rk3576-litcore-grf
+ - rockchip,rk3576-npu-grf
+ - rockchip,rk3576-php-grf
+ - rockchip,rk3576-pipe-phy-grf
+ - rockchip,rk3576-pmu1-grf
+ - rockchip,rk3576-sdgmac-grf
+ - rockchip,rk3576-sys-grf
+ - rockchip,rk3576-usb-grf
+ - rockchip,rk3576-usbdpphy-grf
+ - rockchip,rk3576-vo0-grf
+ - rockchip,rk3576-vop-grf
- rockchip,rk3588-bigcore0-grf
- rockchip,rk3588-bigcore1-grf
- rockchip,rk3588-hdptxphy-grf
- rockchip,rk3399-pmugrf
- rockchip,rk3568-grf
- rockchip,rk3568-pmugrf
+ - rockchip,rk3576-ioc-grf
+ - rockchip,rk3576-pmu0-grf
- rockchip,rk3588-usb2phy-grf
- rockchip,rv1108-grf
- rockchip,rv1108-pmugrf
- enum:
- samsung,exynos850-usi
- reg: true
+ reg:
+ maxItems: 1
- clocks: true
+ clocks:
+ maxItems: 2
- clock-names: true
+ clock-names:
+ items:
+ - const: pclk
+ - const: ipclk
ranges: true
- description: Operating clock for UART/SPI/I2C protocol
clock-names:
- items:
- - const: pclk
- - const: ipclk
+ maxItems: 2
required:
- reg
items:
- const: ti,am654-serdes-ctrl
- const: syscon
+ - const: simple-mfd
reg:
maxItems: 1
examples:
- |
clock@4080 {
- compatible = "ti,am654-serdes-ctrl", "syscon";
+ compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd";
reg = <0x4080 0x4>;
mux-controller {
additionalProperties: false
+ ^pa-stats@[a-f0-9]+$:
+ description: |
+ PA-STATS sub-module represented as a SysCon. PA_STATS is a set of
+ registers where different statistics related to ICSSG, are dumped by
+ ICSSG firmware. This syscon sub-module will help the device to
+ access/read/write those statistics.
+
+ type: object
+
+ additionalProperties: false
+
+ properties:
+ compatible:
+ items:
+ - const: ti,pruss-pa-st
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
interrupt-controller@[a-f0-9]+$:
description: |
PRUSS INTC Node. Each PRUSS has a single interrupt controller instance
A list off component DAPM widget. Each entry is a pair of strings,
the first being the widget type, the second being the widget name
+ clocks:
+ minItems: 1
+ maxItems: 3
+ description:
+ Base PLL clocks of audio susbsytem, used to configure base clock
+ frequencies for different audio use-cases.
+
patternProperties:
"^dai-link-[0-9]+$":
type: object
A list off component DAPM widget. Each entry is a pair of strings,
the first being the widget type, the second being the widget name
+ clocks:
+ minItems: 1
+ maxItems: 3
+ description:
+ Base PLL clocks of audio susbsytem, used to configure base clock
+ frequencies for different audio use-cases.
+
patternProperties:
"^dai-link-[0-9]+$":
type: object
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs4271.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS4271 audio CODEC
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+description:
+ The CS4271 is a stereo audio codec. This device supports both the I2C
+ and the SPI bus.
+
+allOf:
+ - $ref: dai-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: cirrus,cs4271
+
+ reg:
+ maxItems: 1
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ '#sound-dai-cells':
+ const: 0
+
+ reset-gpios:
+ description:
+ This pin will be deasserted before communication to the codec starts.
+ maxItems: 1
+
+ va-supply:
+ description: Analog power supply.
+
+ vd-supply:
+ description: Digital power supply.
+
+ vl-supply:
+ description: Serial Control Port power supply.
+
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
+ cirrus,amuteb-eq-bmutec:
+ description:
+ When given, the Codec's AMUTEB=BMUTEC flag is enabled.
+ type: boolean
+
+ cirrus,enable-soft-reset:
+ description: |
+ The CS4271 requires its LRCLK and MCLK to be stable before its RESET
+ line is de-asserted. That also means that clocks cannot be changed
+ without putting the chip back into hardware reset, which also requires
+ a complete re-initialization of all registers.
+
+ One (undocumented) workaround is to assert and de-assert the PDN bit
+ in the MODE2 register. This workaround can be enabled with this DT
+ property.
+
+ Note that this is not needed in case the clocks are stable
+ throughout the entire runtime of the codec.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@0 {
+ compatible = "cirrus,cs4271";
+ reg = <0>;
+ #sound-dai-cells = <0>;
+ spi-max-frequency = <6000000>;
+ spi-cpol;
+ spi-cpha;
+ reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ port {
+ endpoint {
+ remote-endpoint = <&i2s_ep>;
+ };
+ };
+ };
+ };
+
+...
- const: sclk
- const: lrclk
+ dmas:
+ items:
+ - description: out DMA channel
+ - description: in DMA channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
required:
- compatible
- '#sound-dai-cells'
<&syscon 30>,
<&syscon 31>;
clock-names = "mclk", "sclk", "lrclk";
+ dmas = <&dma0 0 1>, <&dma0 0 2>;
+ dma-names = "tx", "rx";
};
...
+++ /dev/null
-Cirrus Logic CS4271 DT bindings
-
-This driver supports both the I2C and the SPI bus.
-
-Required properties:
-
- - compatible: "cirrus,cs4271"
-
-For required properties on SPI, please consult
-Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Required properties on I2C:
-
- - reg: the i2c address
-
-
-Optional properties:
-
- - reset-gpio: a GPIO spec to define which pin is connected to the chip's
- !RESET pin
- - cirrus,amuteb-eq-bmutec: When given, the Codec's AMUTEB=BMUTEC flag
- is enabled.
- - cirrus,enable-soft-reset:
- The CS4271 requires its LRCLK and MCLK to be stable before its RESET
- line is de-asserted. That also means that clocks cannot be changed
- without putting the chip back into hardware reset, which also requires
- a complete re-initialization of all registers.
-
- One (undocumented) workaround is to assert and de-assert the PDN bit
- in the MODE2 register. This workaround can be enabled with this DT
- property.
-
- Note that this is not needed in case the clocks are stable
- throughout the entire runtime of the codec.
-
- - vd-supply: Digital power
- - vl-supply: Logic power
- - va-supply: Analog Power
-
-Examples:
-
- codec_i2c: cs4271@10 {
- compatible = "cirrus,cs4271";
- reg = <0x10>;
- reset-gpio = <&gpio 23 0>;
- vd-supply = <&vdd_3v3_reg>;
- vl-supply = <&vdd_3v3_reg>;
- va-supply = <&vdd_3v3_reg>;
- };
-
- codec_spi: cs4271@0 {
- compatible = "cirrus,cs4271";
- reg = <0x0>;
- reset-gpio = <&gpio 23 0>;
- spi-max-frequency = <6000000>;
- };
-
+++ /dev/null
-Dialog Semiconductor DA7212/DA7213 Audio Codec bindings
-
-======
-
-Required properties:
-- compatible : Should be "dlg,da7212" or "dlg,da7213"
-- reg: Specifies the I2C slave address
-
-Optional properties:
-- clocks : phandle and clock specifier for codec MCLK.
-- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
-
-- dlg,micbias1-lvl : Voltage (mV) for Mic Bias 1
- [<1600>, <2200>, <2500>, <3000>]
-- dlg,micbias2-lvl : Voltage (mV) for Mic Bias 2
- [<1600>, <2200>, <2500>, <3000>]
-- dlg,dmic-data-sel : DMIC channel select based on clock edge.
- ["lrise_rfall", "lfall_rrise"]
-- dlg,dmic-samplephase : When to sample audio from DMIC.
- ["on_clkedge", "between_clkedge"]
-- dlg,dmic-clkrate : DMIC clock frequency (Hz).
- [<1500000>, <3000000>]
-
- - VDDA-supply : Regulator phandle for Analogue power supply
- - VDDMIC-supply : Regulator phandle for Mic Bias
- - VDDIO-supply : Regulator phandle for I/O power supply
-
-======
-
-Example:
-
- codec_i2c: da7213@1a {
- compatible = "dlg,da7213";
- reg = <0x1a>;
-
- clocks = <&clks 201>;
- clock-names = "mclk";
-
- dlg,micbias1-lvl = <2500>;
- dlg,micbias2-lvl = <2500>;
-
- dlg,dmic-data-sel = "lrise_rfall";
- dlg,dmic-samplephase = "between_clkedge";
- dlg,dmic-clkrate = <3000000>;
- };
default: 2
interrupts:
- anyOf:
- - minItems: 1
- items:
- - description: TX interrupt
- - description: RX interrupt
- - items:
- - description: common/combined interrupt
+ minItems: 1
+ maxItems: 2
interrupt-names:
oneOf:
- - minItems: 1
+ - description: TX interrupt
+ const: tx
+ - description: RX interrupt
+ const: rx
+ - description: TX and RX interrupts
items:
- const: tx
- const: rx
- - const: common
+ - description: Common/combined interrupt
+ const: common
fck_parent:
$ref: /schemas/types.yaml#/definitions/string
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dlg,da7213.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA7212/DA7213 Audio Codec
+
+maintainers:
+ - Support Opensource <support.opensource@diasemi.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - dlg,da7212
+ - dlg,da7213
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: mclk
+
+ "#sound-dai-cells":
+ const: 0
+
+ dlg,micbias1-lvl:
+ description: Voltage (mV) for Mic Bias 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1600, 2200, 2500, 3000 ]
+
+ dlg,micbias2-lvl:
+ description: Voltage (mV) for Mic Bias 2
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1600, 2200, 2500, 3000 ]
+
+ dlg,dmic-data-sel:
+ description: DMIC channel select based on clock edge
+ enum: [ lrise_rfall, lfall_rrise ]
+
+ dlg,dmic-samplephase:
+ description: When to sample audio from DMIC
+ enum: [ on_clkedge, between_clkedge ]
+
+ dlg,dmic-clkrate:
+ description: DMIC clock frequency (Hz)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1500000, 3000000 ]
+
+ VDDA-supply:
+ description: Analogue power supply
+
+ VDDIO-supply:
+ description: I/O power supply
+
+ VDDMIC-supply:
+ description: Mic Bias
+
+ VDDSP-supply:
+ description: Speaker supply
+
+ ports:
+ $ref: audio-graph-port.yaml#/definitions/ports
+
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@1a {
+ compatible = "dlg,da7213";
+ reg = <0x1a>;
+
+ clocks = <&clks 201>;
+ clock-names = "mclk";
+
+ #sound-dai-cells = <0>;
+
+ dlg,micbias1-lvl = <2500>;
+ dlg,micbias2-lvl = <2500>;
+
+ dlg,dmic-data-sel = "lrise_rfall";
+ dlg,dmic-samplephase = "between_clkedge";
+ dlg,dmic-clkrate = <3000000>;
+ };
+ };
description: |
just the value of reg 57. Bit(3) decides whether the jack polarity is inverted.
Bit(2) decides whether the button on the headset is inverted.
- Bit(1)/(0) decides the mic properity to be OMTP/CTIA or auto.
+ Bit(1)/(0) decides the mic property to be OMTP/CTIA or auto.
minimum: 0x00
maximum: 0x0f
default: 0x0f
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx-audio-es8328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX audio complex with ES8328 codec
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+ - Sascha Hauer <s.hauer@pengutronix.de>
+
+allOf:
+ - $ref: sound-card-common.yaml#
+
+properties:
+ compatible:
+ const: fsl,imx-audio-es8328
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: The user-visible name of this sound complex
+
+ ssi-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of the i.MX SSI controller
+
+ jack-gpio:
+ description: Optional GPIO for headphone jack
+ maxItems: 1
+
+ audio-amp-supply:
+ description: Power regulator for speaker amps
+
+ audio-codec:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle to the ES8328 audio codec
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list of the connections between audio components. Each entry
+ is a pair of strings, the first being the connection's sink, the second
+ being the connection's source. Valid names could be power supplies,
+ ES8328 pins, and the jacks on the board:
+
+ Power supplies:
+ * audio-amp
+
+ ES8328 pins:
+ * LOUT1
+ * LOUT2
+ * ROUT1
+ * ROUT2
+ * LINPUT1
+ * LINPUT2
+ * RINPUT1
+ * RINPUT2
+ * Mic PGA
+
+ Board connectors:
+ * Headphone
+ * Speaker
+ * Mic Jack
+
+ mux-int-port:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The internal port of the i.MX audio muxer (AUDMUX)
+ enum: [1, 2, 7]
+ default: 1
+
+ mux-ext-port:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The external port of the i.MX audio muxer (AUDMIX)
+ enum: [3, 4, 5, 6]
+ default: 3
+
+required:
+ - compatible
+ - model
+ - ssi-controller
+ - jack-gpio
+ - audio-amp-supply
+ - audio-codec
+ - audio-routing
+ - mux-int-port
+ - mux-ext-port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "fsl,imx-audio-es8328";
+ model = "imx-audio-es8328";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ jack-gpio = <&gpio5 15 0>;
+ audio-amp-supply = <®_audio_amp>;
+ audio-routing =
+ "Speaker", "LOUT2",
+ "Speaker", "ROUT2",
+ "Speaker", "audio-amp",
+ "Headphone", "ROUT1",
+ "Headphone", "LOUT1",
+ "LINPUT1", "Mic Jack",
+ "RINPUT1", "Mic Jack",
+ "Mic Jack", "Mic Bias";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,saif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Serial Audio Interface (SAIF)
+
+maintainers:
+ - Lukasz Majewski <lukma@denx.de>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+description:
+ The SAIF is based on I2S module that is used to communicate with audio codecs,
+ but only with half-duplex manner (i.e. it can either transmit or receive PCM
+ audio).
+
+properties:
+ compatible:
+ const: fsl,imx28-saif
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
+
+ "#clock-cells":
+ description: Configure the I2S device as MCLK clock provider.
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ fsl,saif-master:
+ description: Indicate that saif is a slave and its phandle points to master
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - interrupts
+ - dmas
+ - dma-names
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ saif0: saif@80042000 {
+ compatible = "fsl,imx28-saif";
+ reg = <0x80042000 2000>;
+ #sound-dai-cells = <0>;
+ interrupts = <59>;
+ dmas = <&dma_apbx 4>;
+ dma-names = "rx-tx";
+ #clock-cells = <0>;
+ clocks = <&clks 53>;
+ };
+ - |
+ saif1: saif@80046000 {
+ compatible = "fsl,imx28-saif";
+ reg = <0x80046000 2000>;
+ #sound-dai-cells = <0>;
+ interrupts = <58>;
+ dmas = <&dma_apbx 5>;
+ dma-names = "rx-tx";
+ clocks = <&clks 53>;
+ fsl,saif-master = <&saif0>;
+ };
+++ /dev/null
-Freescale i.MX audio complex with ES8328 codec
-
-Required properties:
-- compatible : "fsl,imx-audio-es8328"
-- model : The user-visible name of this sound complex
-- ssi-controller : The phandle of the i.MX SSI controller
-- jack-gpio : Optional GPIO for headphone jack
-- audio-amp-supply : Power regulator for speaker amps
-- audio-codec : The phandle of the ES8328 audio codec
-- audio-routing : A list of the connections between audio components.
- Each entry is a pair of strings, the first being the
- connection's sink, the second being the connection's
- source. Valid names could be power supplies, ES8328
- pins, and the jacks on the board:
-
- Power supplies:
- * audio-amp
-
- ES8328 pins:
- * LOUT1
- * LOUT2
- * ROUT1
- * ROUT2
- * LINPUT1
- * LINPUT2
- * RINPUT1
- * RINPUT2
- * Mic PGA
-
- Board connectors:
- * Headphone
- * Speaker
- * Mic Jack
-- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
-- mux-ext-port : The external port of the i.MX audio muxer (AUDMIX)
-
-Note: The AUDMUX port numbering should start at 1, which is consistent with
-hardware manual.
-
-Example:
-
-sound {
- compatible = "fsl,imx-audio-es8328";
- model = "imx-audio-es8328";
- ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
- jack-gpio = <&gpio5 15 0>;
- audio-amp-supply = <®_audio_amp>;
- audio-routing =
- "Speaker", "LOUT2",
- "Speaker", "ROUT2",
- "Speaker", "audio-amp",
- "Headphone", "ROUT1",
- "Headphone", "LOUT1",
- "LINPUT1", "Mic Jack",
- "RINPUT1", "Mic Jack",
- "Mic Jack", "Mic Bias";
- mux-int-port = <1>;
- mux-ext-port = <3>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt8365-afe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Audio Front End PCM controller for MT8365
+
+maintainers:
+ - Alexandre Mergnat <amergnat@baylibre.com>
+
+properties:
+ compatible:
+ const: mediatek,mt8365-afe-pcm
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: 26M clock
+ - description: mux for audio clock
+ - description: audio i2s0 mck
+ - description: audio i2s1 mck
+ - description: audio i2s2 mck
+ - description: audio i2s3 mck
+ - description: engen 1 clock
+ - description: engen 2 clock
+ - description: audio 1 clock
+ - description: audio 2 clock
+ - description: mux for i2s0
+ - description: mux for i2s1
+ - description: mux for i2s2
+ - description: mux for i2s3
+
+ clock-names:
+ items:
+ - const: top_clk26m_clk
+ - const: top_audio_sel
+ - const: audio_i2s0_m
+ - const: audio_i2s1_m
+ - const: audio_i2s2_m
+ - const: audio_i2s3_m
+ - const: engen1
+ - const: engen2
+ - const: aud1
+ - const: aud2
+ - const: i2s0_m_sel
+ - const: i2s1_m_sel
+ - const: i2s2_m_sel
+ - const: i2s3_m_sel
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ mediatek,dmic-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Indicates how many data pins are used to transmit two channels of PDM
+ signal. 1 means two wires, 0 means one wire. Default value is 0.
+ enum:
+ - 0 # one wire
+ - 1 # two wires
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mediatek,mt8365-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/mediatek,mt8365-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ audio-controller@11220000 {
+ compatible = "mediatek,mt8365-afe-pcm";
+ reg = <0 0x11220000 0 0x1000>;
+ #sound-dai-cells = <0>;
+ clocks = <&clk26m>,
+ <&topckgen CLK_TOP_AUDIO_SEL>,
+ <&topckgen CLK_TOP_AUD_I2S0_M>,
+ <&topckgen CLK_TOP_AUD_I2S1_M>,
+ <&topckgen CLK_TOP_AUD_I2S2_M>,
+ <&topckgen CLK_TOP_AUD_I2S3_M>,
+ <&topckgen CLK_TOP_AUD_ENGEN1_SEL>,
+ <&topckgen CLK_TOP_AUD_ENGEN2_SEL>,
+ <&topckgen CLK_TOP_AUD_1_SEL>,
+ <&topckgen CLK_TOP_AUD_2_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S0_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S1_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S2_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S3_SEL>;
+ clock-names = "top_clk26m_clk",
+ "top_audio_sel",
+ "audio_i2s0_m",
+ "audio_i2s1_m",
+ "audio_i2s2_m",
+ "audio_i2s3_m",
+ "engen1",
+ "engen2",
+ "aud1",
+ "aud2",
+ "i2s0_m_sel",
+ "i2s1_m_sel",
+ "i2s2_m_sel",
+ "i2s3_m_sel";
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_AUDIO>;
+ mediatek,dmic-mode = <1>;
+ };
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt8365-mt6357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8365 ASoC sound card
+
+maintainers:
+ - Alexandre Mergnat <amergnat@baylibre.com>
+
+properties:
+ compatible:
+ const: mediatek,mt8365-mt6357
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: dmic
+ - const: miso_off
+ - const: miso_on
+ - const: mosi_off
+ - const: mosi_on
+
+ mediatek,platform:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of MT8365 ASoC platform.
+
+patternProperties:
+ "^dai-link-[0-9]+$":
+ type: object
+ description:
+ Container for dai-link level properties and CODEC sub-nodes.
+
+ properties:
+ codec:
+ type: object
+ description: Holds subnode which indicates codec dai.
+
+ properties:
+ sound-dai:
+ maxItems: 1
+ description: phandle of the codec DAI
+
+ additionalProperties: false
+
+ link-name:
+ description: Indicates dai-link name and PCM stream name
+ enum:
+ - I2S_IN_BE
+ - I2S_OUT_BE
+ - PCM1_BE
+ - PDM1_BE
+ - PDM2_BE
+ - PDM3_BE
+ - PDM4_BE
+ - SPDIF_IN_BE
+ - SPDIF_OUT_BE
+ - TDM_IN_BE
+ - TDM_OUT_BE
+
+ sound-dai:
+ maxItems: 1
+ description: phandle of the CPU DAI
+
+ required:
+ - link-name
+ - sound-dai
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - pinctrl-names
+ - mediatek,platform
+
+additionalProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "mediatek,mt8365-mt6357";
+ pinctrl-names = "default",
+ "dmic",
+ "miso_off",
+ "miso_on",
+ "mosi_off",
+ "mosi_on";
+ pinctrl-0 = <&aud_default_pins>;
+ pinctrl-1 = <&aud_dmic_pins>;
+ pinctrl-2 = <&aud_miso_off_pins>;
+ pinctrl-3 = <&aud_miso_on_pins>;
+ pinctrl-4 = <&aud_mosi_off_pins>;
+ pinctrl-5 = <&aud_mosi_on_pins>;
+ mediatek,platform = <&afe>;
+
+ /* hdmi interface */
+ dai-link-0 {
+ link-name = "I2S_OUT_BE";
+ sound-dai = <&afe>;
+
+ codec {
+ sound-dai = <&it66121hdmitx>;
+ };
+ };
+ };
The Microchip Sony/Philips Digital Interface Receiver is a serial port
compliant with the IEC-60958 standard.
+allOf:
+ - $ref: dai-common.yaml#
+
properties:
"#sound-dai-cells":
const: 0
- dmas
- dma-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
+++ /dev/null
-* Freescale MXS Serial Audio Interface (SAIF)
-
-Required properties:
-- compatible: Should be "fsl,<chip>-saif"
-- reg: Should contain registers location and length
-- interrupts: Should contain ERROR interrupt number
-- dmas: DMA specifier, consisting of a phandle to DMA controller node
- and SAIF DMA channel ID.
- Refer to dma.txt and fsl-mxs-dma.txt for details.
-- dma-names: Must be "rx-tx".
-
-Optional properties:
-- fsl,saif-master: phandle to the master SAIF. It's only required for
- the slave SAIF.
-
-Note: Each SAIF controller should have an alias correctly numbered
-in "aliases" node.
-
-Example:
-
-aliases {
- saif0 = &saif0;
- saif1 = &saif1;
-};
-
-saif0: saif@80042000 {
- compatible = "fsl,imx28-saif";
- reg = <0x80042000 2000>;
- interrupts = <59>;
- dmas = <&dma_apbx 4>;
- dma-names = "rx-tx";
-};
-
-saif1: saif@80046000 {
- compatible = "fsl,imx28-saif";
- reg = <0x80046000 2000>;
- interrupts = <58>;
- dmas = <&dma_apbx 5>;
- dma-names = "rx-tx";
- fsl,saif-master = <&saif0>;
-};
+++ /dev/null
-PCM512x and TAS575x audio CODECs/amplifiers
-
-These devices support both I2C and SPI (configured with pin strapping
-on the board). The TAS575x devices only support I2C.
-
-Required properties:
-
- - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141",
- "ti,pcm5142", "ti,pcm5242", "ti,tas5754" or "ti,tas5756"
-
- - reg : the I2C address of the device for I2C, the chip select
- number for SPI.
-
- - AVDD-supply, DVDD-supply, and CPVDD-supply : power supplies for the
- device, as covered in bindings/regulator/regulator.txt
-
-Optional properties:
-
- - clocks : A clock specifier for the clock connected as SCLK. If this
- is absent the device will be configured to clock from BCLK. If pll-in
- and pll-out are specified in addition to a clock, the device is
- configured to accept clock input on a specified gpio pin.
-
- - pll-in, pll-out : gpio pins used to connect the pll using <1>
- through <6>. The device will be configured for clock input on the
- given pll-in pin and PLL output on the given pll-out pin. An
- external connection from the pll-out pin to the SCLK pin is assumed.
- Caution: the TAS-desvices only support gpios 1,2 and 3
-
-Examples:
-
- pcm5122: pcm5122@4c {
- compatible = "ti,pcm5122";
- reg = <0x4c>;
-
- AVDD-supply = <®_3v3_analog>;
- DVDD-supply = <®_1v8>;
- CPVDD-supply = <®_3v3>;
- };
-
-
- pcm5142: pcm5142@4c {
- compatible = "ti,pcm5142";
- reg = <0x4c>;
-
- AVDD-supply = <®_3v3_analog>;
- DVDD-supply = <®_1v8>;
- CPVDD-supply = <®_3v3>;
-
- clocks = <&sck>;
- pll-in = <3>;
- pll-out = <6>;
- };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,apq8016-sbc-sndcard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APQ8016 and similar sound cards
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+ - Stephan Gerhold <stephan@gerhold.net>
+
+properties:
+ compatible:
+ enum:
+ - qcom,apq8016-sbc-sndcard
+ - qcom,msm8916-qdsp6-sndcard
+
+ reg:
+ items:
+ - description: Microphone I/O mux register address
+ - description: Speaker I/O mux register address
+
+ reg-names:
+ items:
+ - const: mic-iomux
+ - const: spkr-iomux
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description:
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source. Valid names could be power supplies,
+ MicBias of codec and the jacks on the board.
+
+ aux-devs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ List of phandles pointing to auxiliary devices, such
+ as amplifiers, to be added to the sound card.
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: User visible long sound card name
+
+ pin-switches:
+ description: List of widget names for which pin switches should be created.
+ $ref: /schemas/types.yaml#/definitions/string-array
+
+ widgets:
+ description: User specified audio sound widgets.
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+patternProperties:
+ ".*-dai-link$":
+ description:
+ Each subnode represents a dai link. Subnodes of each dai links would be
+ cpu/codec dais.
+
+ type: object
+
+ properties:
+ link-name:
+ description: Indicates dai-link name and PCM stream name.
+ $ref: /schemas/types.yaml#/definitions/string
+ maxItems: 1
+
+ cpu:
+ description: Holds subnode which indicates cpu dai.
+ type: object
+ additionalProperties: false
+
+ properties:
+ sound-dai:
+ maxItems: 1
+
+ platform:
+ description: Holds subnode which indicates platform dai.
+ type: object
+ additionalProperties: false
+
+ properties:
+ sound-dai:
+ maxItems: 1
+
+ codec:
+ description: Holds subnode which indicates codec dai.
+ type: object
+ additionalProperties: false
+
+ properties:
+ sound-dai:
+ minItems: 1
+ maxItems: 8
+
+ required:
+ - link-name
+ - cpu
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - model
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,lpass.h>
+ sound@7702000 {
+ compatible = "qcom,apq8016-sbc-sndcard";
+ reg = <0x07702000 0x4>, <0x07702004 0x4>;
+ reg-names = "mic-iomux", "spkr-iomux";
+
+ model = "DB410c";
+ audio-routing =
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+
+ pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+ pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+ pinctrl-names = "default", "sleep";
+
+ quaternary-dai-link {
+ link-name = "ADV7533";
+ cpu {
+ sound-dai = <&lpass MI2S_QUATERNARY>;
+ };
+ codec {
+ sound-dai = <&adv_bridge 0>;
+ };
+ };
+
+ primary-dai-link {
+ link-name = "WCD";
+ cpu {
+ sound-dai = <&lpass MI2S_PRIMARY>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+ };
+ };
+
+ tertiary-dai-link {
+ link-name = "WCD-Capture";
+ cpu {
+ sound-dai = <&lpass MI2S_TERTIARY>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/sound/qcom,q6afe.h>
+ #include <dt-bindings/sound/qcom,q6asm.h>
+ sound@7702000 {
+ compatible = "qcom,msm8916-qdsp6-sndcard";
+ reg = <0x07702000 0x4>, <0x07702004 0x4>;
+ reg-names = "mic-iomux", "spkr-iomux";
+
+ model = "msm8916";
+ widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones";
+ pin-switches = "Speaker";
+ audio-routing =
+ "Speaker", "Speaker Amp OUT",
+ "Speaker Amp IN", "HPH_R",
+ "Headphones", "HPH_L",
+ "Headphones", "HPH_R",
+ "AMIC1", "MIC BIAS Internal1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS Internal3";
+ aux-devs = <&speaker_amp>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cdc_pdm_lines_act>;
+ pinctrl-1 = <&cdc_pdm_lines_sus>;
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ primary-dai-link {
+ link-name = "Primary MI2S";
+ cpu {
+ sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+ };
+ };
+ };
compatible:
enum:
- qcom,sc7280-lpass-wsa-macro
+ - qcom,sm8250-lpass-wsa-macro
- qcom,sm8450-lpass-wsa-macro
- qcom,sc8280xp-lpass-wsa-macro
then:
- const: dcodec
- const: fsgen
- - if:
- properties:
- compatible:
- enum:
- - qcom,sm8250-lpass-wsa-macro
- then:
- properties:
- clocks:
- minItems: 6
- clock-names:
- items:
- - const: mclk
- - const: npl
- - const: macro
- - const: dcodec
- - const: va
- - const: fsgen
-
- if:
properties:
compatible:
<&audiocc 0>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&aoncc LPASS_CDC_VA_MCLK>,
<&vamacro>;
- clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
clock-output-names = "mclk";
};
- qcom,sm8650-sndcard
- const: qcom,sm8450-sndcard
- enum:
- - qcom,apq8016-sbc-sndcard
- qcom,apq8096-sndcard
- - qcom,msm8916-qdsp6-sndcard
- qcom,qcm6490-idp-sndcard
- qcom,qcs6490-rb3gen2-sndcard
+ - qcom,qrb4210-rb2-sndcard
- qcom,qrb5165-rb5-sndcard
- qcom,sc7180-qdsp6-sndcard
- qcom,sc8280xp-sndcard
$ref: /schemas/types.yaml#/definitions/string
description: User visible long sound card name
- pin-switches:
- description: List of widget names for which pin switches should be created.
- $ref: /schemas/types.yaml#/definitions/string-array
-
- widgets:
- description: User specified audio sound widgets.
- $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-
- # Only valid for some compatibles (see allOf if below)
- reg: true
- reg-names: true
-
patternProperties:
".*-dai-link$":
description:
- compatible
- model
-allOf:
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,apq8016-sbc-sndcard
- - qcom,msm8916-qdsp6-sndcard
- then:
- properties:
- reg:
- items:
- - description: Microphone I/O mux register address
- - description: Speaker I/O mux register address
- reg-names:
- items:
- - const: mic-iomux
- - const: spkr-iomux
- required:
- - compatible
- - model
- - reg
- - reg-names
- else:
- properties:
- reg: false
- reg-names: false
-
additionalProperties: false
examples:
};
};
};
-
- - |
- #include <dt-bindings/sound/qcom,lpass.h>
- sound@7702000 {
- compatible = "qcom,apq8016-sbc-sndcard";
- reg = <0x07702000 0x4>, <0x07702004 0x4>;
- reg-names = "mic-iomux", "spkr-iomux";
-
- model = "DB410c";
- audio-routing =
- "AMIC2", "MIC BIAS Internal2",
- "AMIC3", "MIC BIAS External1";
-
- pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
- pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
- pinctrl-names = "default", "sleep";
-
- quaternary-dai-link {
- link-name = "ADV7533";
- cpu {
- sound-dai = <&lpass MI2S_QUATERNARY>;
- };
- codec {
- sound-dai = <&adv_bridge 0>;
- };
- };
-
- primary-dai-link {
- link-name = "WCD";
- cpu {
- sound-dai = <&lpass MI2S_PRIMARY>;
- };
- codec {
- sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
- };
- };
-
- tertiary-dai-link {
- link-name = "WCD-Capture";
- cpu {
- sound-dai = <&lpass MI2S_TERTIARY>;
- };
- codec {
- sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
- };
- };
- };
-
- - |
- #include <dt-bindings/sound/qcom,q6afe.h>
- #include <dt-bindings/sound/qcom,q6asm.h>
- sound@7702000 {
- compatible = "qcom,msm8916-qdsp6-sndcard";
- reg = <0x07702000 0x4>, <0x07702004 0x4>;
- reg-names = "mic-iomux", "spkr-iomux";
-
- model = "msm8916";
- widgets =
- "Speaker", "Speaker",
- "Headphone", "Headphones";
- pin-switches = "Speaker";
- audio-routing =
- "Speaker", "Speaker Amp OUT",
- "Speaker Amp IN", "HPH_R",
- "Headphones", "HPH_L",
- "Headphones", "HPH_R",
- "AMIC1", "MIC BIAS Internal1",
- "AMIC2", "MIC BIAS Internal2",
- "AMIC3", "MIC BIAS Internal3";
- aux-devs = <&speaker_amp>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cdc_pdm_lines_act>;
- pinctrl-1 = <&cdc_pdm_lines_sus>;
-
- mm1-dai-link {
- link-name = "MultiMedia1";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
- };
- };
-
- primary-dai-link {
- link-name = "Primary MI2S";
- cpu {
- sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
- };
- platform {
- sound-dai = <&q6routing>;
- };
- codec {
- sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
- };
- };
- };
reg:
maxItems: 1
+ clocks:
+ items:
+ - description: Master clock to the CODEC
+
+ clock-names:
+ items:
+ - const: mclk
+
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
required:
- compatible
- reg
description: List of necessary clock names.
# details are defined below
+ post-init-providers:
+ description: At least if rsnd is using DPCM connection on Audio-Graph-Card2,
+ fw_devlink might doesn't have enough information to break the cycle. rsnd
+ driver will not be probed in such case. Same problem might occur with
+ Multi-CPU/Codec or Codec2Codec.
+
# ports is below
port:
$ref: audio-graph-port.yaml#/definitions/port-base
reg-names:
items:
enum:
- - scu
+ - sru
- ssi
- adg
# for Gen2/Gen3
'#sound-dai-cells':
const: 0
+ port:
+ $ref: audio-graph-port.yaml#/definitions/port-base
+ description: Connection to controller providing I2S signals
+
required:
- compatible
- reg
- const: mclk_rx
- const: hclk
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
resets:
maxItems: 1
- const: samsung,odroid-xu4-audio
deprecated: true
- assigned-clock-parents: true
- assigned-clock-rates: true
- assigned-clocks: true
- clocks: true
-
cpu:
type: object
additionalProperties: false
configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud
results in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default)
+allOf:
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
properties:
compatible:
const: serial-midi
- st,odd-pwm-speed-mode:
If present, PWM speed mode run on odd speed mode (341.3 kHz) on all
- channels. If not present, normal PWM spped mode (384 kHz) will be used.
+ channels. If not present, normal PWM speed mode (384 kHz) will be used.
- st,distortion-compensation:
If present, distortion compensation variable uses DCC coefficient.
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,pcm512x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCM512x and TAS575x audio CODECs/amplifiers
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,pcm5121
+ - ti,pcm5122
+ - ti,pcm5141
+ - ti,pcm5142
+ - ti,pcm5242
+ - ti,tas5754
+ - ti,tas5756
+
+ reg:
+ maxItems: 1
+
+ AVDD-supply: true
+
+ DVDD-supply: true
+
+ CPVDD-supply: true
+
+ clocks:
+ maxItems: 1
+ description: A clock specifier for the clock connected as SCLK. If this is
+ absent the device will be configured to clock from BCLK. If pll-in and
+ pll-out are specified in addition to a clock, the device is configured to
+ accept clock input on a specified gpio pin.
+
+ '#sound-dai-cells':
+ const: 0
+
+ pll-in:
+ description: GPIO pin used to connect the pll using <1> through <6>. The
+ device will be configured for clock input on the given pll-in pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 6
+
+ pll-out:
+ description: GPIO pin used to connect the pll using <1> through <6>. The
+ device will be configured for PLL output on the given pll-out pin. An
+ external connection from the pll-out pin to the SCLK pin is assumed.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 6
+
+required:
+ - compatible
+ - reg
+ - AVDD-supply
+ - DVDD-supply
+ - CPVDD-supply
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,tas5754
+ - ti,tas5756
+
+then:
+ properties:
+ pll-in:
+ maximum: 3
+
+ pll-out:
+ maximum: 3
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@4c {
+ compatible = "ti,pcm5142";
+ reg = <0x4c>;
+ AVDD-supply = <®_3v3_analog>;
+ DVDD-supply = <®_1v8>;
+ CPVDD-supply = <®_3v3>;
+ #sound-dai-cells = <0>;
+ clocks = <&sck>;
+ pll-in = <3>;
+ pll-out = <6>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tlv320dac3100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - tlv320aic31xx Codec module
+
+maintainers:
+ - Shenghao Ding <shenghao-ding@ti.com>
+
+description: |
+ CODEC output pins:
+ * HPL
+ * HPR
+ * SPL, devices with stereo speaker amp
+ * SPR, devices with stereo speaker amp
+ * SPK, devices with mono speaker amp
+ * MICBIAS
+
+ CODEC input pins:
+ * MIC1LP, devices with ADC
+ * MIC1RP, devices with ADC
+ * MIC1LM, devices with ADC
+ * AIN1, devices without ADC
+ * AIN2, devices without ADC
+
+ The pins can be used in referring sound node's audio-routing property.
+
+properties:
+ compatible:
+ enum:
+ - ti,tlv320aic310x # - Generic TLV320AIC31xx with mono speaker amp
+ - ti,tlv320aic311x # - Generic TLV320AIC31xx with stereo speaker amp
+ - ti,tlv320aic3100 # - TLV320AIC3100 (mono speaker amp, no MiniDSP)
+ - ti,tlv320aic3110 # - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
+ - ti,tlv320aic3120 # - TLV320AIC3120 (mono speaker amp, MiniDSP)
+ - ti,tlv320aic3111 # - TLV320AIC3111 (stereo speaker amp, MiniDSP)
+ - ti,tlv320dac3100 # - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
+ - ti,tlv320dac3101 # - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
+
+ reg:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 0
+
+ HPVDD-supply: true
+
+ SPRVDD-supply: true
+
+ SPLVDD-supply: true
+
+ AVDD-supply: true
+
+ IOVDD-supply: true
+
+ DVDD-supply: true
+
+ reset-gpios:
+ description: GPIO specification for the active low RESET input.
+
+ ai31xx-micbias-vg:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 1
+ enum: [1, 2, 3]
+ description: |
+ MicBias Voltage setting
+ 1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
+ 2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
+ 3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
+
+ ai31xx-ocmv:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ output common-mode voltage setting
+ 0 - 1.35V,
+ 1 - 1.5V,
+ 2 - 1.65V,
+ 3 - 1.8V
+
+ gpio-reset:
+ description: gpio pin number used for codec reset
+ deprecated: true
+
+
+required:
+ - compatible
+ - reg
+ - HPVDD-supply
+ - SPRVDD-supply
+ - SPLVDD-supply
+ - AVDD-supply
+ - IOVDD-supply
+ - DVDD-supply
+
+allOf:
+ - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/sound/tlv320aic31xx.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sound@18 {
+ compatible = "ti,tlv320aic311x";
+ reg = <0x18>;
+
+ ai31xx-micbias-vg = <MICBIAS_2_0V>;
+ reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+
+ HPVDD-supply = <®ulator>;
+ SPRVDD-supply = <®ulator>;
+ SPLVDD-supply = <®ulator>;
+ AVDD-supply = <®ulator>;
+ IOVDD-supply = <®ulator>;
+ DVDD-supply = <®ulator>;
+ };
+ };
+
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tpa6130a2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - tpa6130a2 Codec module
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description:
+ Stereo, analog input headphone amplifier
+
+properties:
+ compatible:
+ enum:
+ - ti,tpa6130a2
+ - ti,tpa6140a2
+
+ reg:
+ maxItems: 1
+
+ Vdd-supply:
+ description: power supply regulator
+
+ power-gpio:
+ description: gpio pin to power the device
+
+required:
+ - compatible
+ - reg
+ - Vdd-supply
+
+allOf:
+ - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ amplifier@60 {
+ compatible = "ti,tpa6130a2";
+ reg = <0x60>;
+ Vdd-supply = <&vmmc2>;
+ power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+++ /dev/null
-Texas Instruments - tlv320aic31xx Codec module
-
-The tlv320aic31xx serial control bus communicates through I2C protocols
-
-Required properties:
-
-- compatible - "string" - One of:
- "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp
- "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp
- "ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP)
- "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
- "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
- "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
- "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
- "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
-
-- reg - <int> - I2C slave address
-- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
- DVDD-supply : power supplies for the device as covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Optional properties:
-
-- reset-gpios - GPIO specification for the active low RESET input.
-- ai31xx-micbias-vg - MicBias Voltage setting
- 1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
- 2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
- 3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
- If this node is not mentioned or if the value is unknown, then
- micbias is set to 2.0V.
-- ai31xx-ocmv - output common-mode voltage setting
- 0 - 1.35V,
- 1 - 1.5V,
- 2 - 1.65V,
- 3 - 1.8V
-
-Deprecated properties:
-
-- gpio-reset - gpio pin number used for codec reset
-
-CODEC output pins:
- * HPL
- * HPR
- * SPL, devices with stereo speaker amp
- * SPR, devices with stereo speaker amp
- * SPK, devices with mono speaker amp
- * MICBIAS
-
-CODEC input pins:
- * MIC1LP, devices with ADC
- * MIC1RP, devices with ADC
- * MIC1LM, devices with ADC
- * AIN1, devices without ADC
- * AIN2, devices without ADC
-
-The pins can be used in referring sound node's audio-routing property.
-
-Example:
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/tlv320aic31xx.h>
-
-tlv320aic31xx: tlv320aic31xx@18 {
- compatible = "ti,tlv320aic311x";
- reg = <0x18>;
-
- ai31xx-micbias-vg = <MICBIAS_OFF>;
-
- reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-
- HPVDD-supply = <®ulator>;
- SPRVDD-supply = <®ulator>;
- SPLVDD-supply = <®ulator>;
- AVDD-supply = <®ulator>;
- IOVDD-supply = <®ulator>;
- DVDD-supply = <®ulator>;
-};
+++ /dev/null
-Texas Instruments - tpa6130a2 Codec module
-
-The tpa6130a2 serial control bus communicates through I2C protocols
-
-Required properties:
-
-- compatible - "string" - One of:
- "ti,tpa6130a2" - TPA6130A2
- "ti,tpa6140a2" - TPA6140A2
-
-
-- reg - <int> - I2C slave address
-
-- Vdd-supply - <phandle> - power supply regulator
-
-Optional properties:
-
-- power-gpio - gpio pin to power the device
-
-Example:
-
-tpa6130a2: tpa6130a2@60 {
- compatible = "ti,tpa6130a2";
- reg = <0x60>;
- Vdd-supply = <&vmmc2>;
- power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
-};
single, dual, quad or octal wire transmission modes for
read/write access to slaves such as SPI-NOR flash.
-allOf:
- - $ref: spi-controller.yaml#
-
properties:
compatible:
- const: cdns,xspi-nor
+ enum:
+ - cdns,xspi-nor
+ - marvell,cn10-xspi-nor
reg:
items:
- description: address and length of the controller register set
- description: address and length of the Slave DMA data port
- description: address and length of the auxiliary registers
+ - description: address and length of the xfer registers
+ minItems: 3
reg-names:
items:
- const: io
- const: sdma
- const: aux
+ - const: xfer
+ minItems: 3
interrupts:
maxItems: 1
- reg
- interrupts
+allOf:
+ - $ref: spi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - marvell,cn10-xspi-nor
+ then:
+ properties:
+ reg:
+ minItems: 4
+ reg-names:
+ minItems: 4
+ else:
+ properties:
+ reg:
+ maxItems: 3
+ reg-names:
+ maxItems: 3
+
unevaluatedProperties: false
examples:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cirrus,ep9301-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx SoC SPI controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-spi
+ - items:
+ - enum:
+ - cirrus,ep9302-spi
+ - cirrus,ep9307-spi
+ - cirrus,ep9312-spi
+ - cirrus,ep9315-spi
+ - const: cirrus,ep9301-spi
+
+ reg:
+ items:
+ - description: SPI registers region
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SPI Controller reference clock source
+
+ dmas:
+ items:
+ - description: rx DMA channel
+ - description: tx DMA channel
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+ spi@808a0000 {
+ compatible = "cirrus,ep9301-spi";
+ reg = <0x808a0000 0x18>;
+ interrupt-parent = <&vic1>;
+ interrupts = <21>;
+ clocks = <&syscon EP93XX_CLK_SPI>;
+ dmas = <&dma1 10 2>, <&dma1 10 1>;
+ dma-names = "rx", "tx";
+ cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ };
- const: mediatek,mt6765-spi
- items:
- enum:
+ - mediatek,mt7981-spi-ipm
- mediatek,mt7986-spi-ipm
- mediatek,mt8188-spi-ipm
- const: mediatek,spi-ipm
compatible:
oneOf:
- items:
- - const: microchip,mpfs-qspi
+ - enum:
+ - microchip,mpfs-qspi
+ - microchip,pic64gx-qspi
- const: microchip,coreqspi-rtl-v2
- const: microchip,coreqspi-rtl-v2 # FPGA QSPI
+ - items:
+ - const: microchip,pic64gx-spi
+ - const: microchip,mpfs-spi
- const: microchip,mpfs-spi
reg:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nxp,sc18is.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP SC18IS602/SC18IS603 I2C to SPI bridge
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - nxp,sc18is602
+ - nxp,sc18is602b
+ - nxp,sc18is603
+
+ reg:
+ maxItems: 1
+
+ clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 7372000
+ description:
+ external oscillator clock frequency. The clock-frequency property is
+ relevant and needed only if the chip has an external oscillator
+ (SC18IS603).
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi@28 {
+ compatible = "nxp,sc18is603";
+ reg = <0x28>;
+ clock-frequency = <14744000>;
+ };
+ };
+
- nxp,imx8mm-fspi
- nxp,imx8mp-fspi
- nxp,imx8qxp-fspi
+ - nxp,imx8ulp-fspi
- nxp,lx2160a-fspi
- items:
- enum:
- rockchip,rk3368-spi
- rockchip,rk3399-spi
- rockchip,rk3568-spi
+ - rockchip,rk3576-spi
- rockchip,rk3588-spi
- rockchip,rv1126-spi
- const: rockchip,rk3066-spi
+++ /dev/null
-NXP SC18IS602/SCIS603
-
-Required properties:
- - compatible : Should be one of
- "nxp,sc18is602"
- "nxp,sc18is602b"
- "nxp,sc18is603"
- - reg: I2C bus address
-
-Optional properties:
- - clock-frequency : external oscillator clock frequency. If not
- specified, the SC18IS602 default frequency (7372000) will be used.
-
-The clock-frequency property is relevant and needed only if the chip has an
-external oscillator (SC18IS603).
-
-Example:
-
- sc18is603@28 {
- compatible = "nxp,sc18is603";
- reg = <0x28>;
- clock-frequency = <14744000>;
- }
clocks:
maxItems: 1
+ power-domains:
+ maxItems: 1
+
amlogic,ao-secure:
description: phandle to the ao-secure syscon
$ref: /schemas/types.yaml#/definitions/phandle
- qcom,msm8996-tsens
- qcom,msm8998-tsens
- qcom,qcm2290-tsens
+ - qcom,sa8255p-tsens
- qcom,sa8775p-tsens
- qcom,sc7180-tsens
- qcom,sc7280-tsens
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- // Example 1 (new calbiration data: for pre v1 IP):
+ // Example 1 (new calibration data: for pre v1 IP):
thermal-sensor@4a9000 {
compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
reg = <0x4a9000 0x1000>, /* TM */
+++ /dev/null
-BCM2835 System Timer
-
-The System Timer peripheral provides four 32-bit timer channels and a
-single 64-bit free running counter. Each channel has an output compare
-register, which is compared against the 32 least significant bits of the
-free running counter values, and generates an interrupt.
-
-Required properties:
-
-- compatible : should be "brcm,bcm2835-system-timer"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 4 interrupt sinks; one per timer channel.
-- clock-frequency : The frequency of the clock that drives the counter, in Hz.
-
-Example:
-
-timer {
- compatible = "brcm,bcm2835-system-timer";
- reg = <0x7e003000 0x1000>;
- interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
- clock-frequency = <1000000>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/brcm,bcm2835-system-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 System Timer
+
+maintainers:
+ - Stefan Wahren <wahrenst@gmx.net>
+ - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description:
+ The System Timer peripheral provides four 32-bit timer channels and a
+ single 64-bit free running counter. Each channel has an output compare
+ register, which is compared against the 32 least significant bits of the
+ free running counter values, and generates an interrupt.
+
+properties:
+ compatible:
+ const: brcm,bcm2835-system-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: System Timer Compare 0 match (used by VideoCore GPU)
+ - description: System Timer Compare 1 match (usable for ARM core)
+ - description: System Timer Compare 2 match (used by VideoCore GPU)
+ - description: System Timer Compare 3 match (usable for ARM core)
+
+ clock-frequency: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ timer@7e003000 {
+ compatible = "brcm,bcm2835-system-timer";
+ reg = <0x7e003000 0x1000>;
+ interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+ clock-frequency = <1000000>;
+ };
+...
+++ /dev/null
-Freescale FlexTimer Module (FTM) Timer
-
-Required properties:
-
-- compatible : should be "fsl,ftm-timer"
-- reg : Specifies base physical address and size of the register sets for the
- clock event device and clock source device.
-- interrupts : Should be the clock event device interrupt.
-- clocks : The clocks provided by the SoC to drive the timer, must contain an
- entry for each entry in clock-names.
-- clock-names : Must include the following entries:
- o "ftm-evt"
- o "ftm-src"
- o "ftm-evt-counter-en"
- o "ftm-src-counter-en"
-- big-endian: One boolean property, the big endian mode will be in use if it is
- present, or the little endian mode will be in use for all the device registers.
-
-Example:
-ftm: ftm@400b8000 {
- compatible = "fsl,ftm-timer";
- reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
- interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "ftm-evt", "ftm-src",
- "ftm-evt-counter-en", "ftm-src-counter-en";
- clocks = <&clks VF610_CLK_FTM2>,
- <&clks VF610_CLK_FTM3>,
- <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
- <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
- big-endian;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/fsl,ftm-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale FlexTimer Module (FTM) Timer
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+ compatible:
+ const: fsl,ftm-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description: The clocks provided by the SoC to drive the timer, must
+ contain an entry for each entry in clock-names.
+ minItems: 4
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: ftm-evt
+ - const: ftm-src
+ - const: ftm-evt-counter-en
+ - const: ftm-src-counter-en
+
+ big-endian: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/vf610-clock.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ ftm@400b8000 {
+ compatible = "fsl,ftm-timer";
+ reg = <0x400b8000 0x1000>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "ftm-evt", "ftm-src", "ftm-evt-counter-en", "ftm-src-counter-en";
+ clocks = <&clks VF610_CLK_FTM2>, <&clks VF610_CLK_FTM3>,
+ <&clks VF610_CLK_FTM2_EXT_FIX_EN>, <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+ big-endian;
+ };
+++ /dev/null
-* NXP LPC3220 timer
-
-The NXP LPC3220 timer is used on a wide range of NXP SoCs. This
-includes LPC32xx, LPC178x, LPC18xx and LPC43xx parts.
-
-Required properties:
-- compatible:
- Should be "nxp,lpc3220-timer".
-- reg:
- Address and length of the register set.
-- interrupts:
- Reference to the timer interrupt
-- clocks:
- Should contain a reference to timer clock.
-- clock-names:
- Should contain "timerclk".
-
-Example:
-
-timer1: timer@40085000 {
- compatible = "nxp,lpc3220-timer";
- reg = <0x40085000 0x1000>;
- interrupts = <13>;
- clocks = <&ccu1 CLK_CPU_TIMER1>;
- clock-names = "timerclk";
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,lpc3220-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC3220 timer
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+description: |
+ The NXP LPC3220 timer is used on a wide range of NXP SoCs. This includes
+ LPC32xx, LPC178x, LPC18xx and LPC43xx parts.
+
+properties:
+ compatible:
+ const: nxp,lpc3220-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: timerclk
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc32xx-clock.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ timer@4004c000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x4004c000 0x1000>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER1>;
+ clock-names = "timerclk";
+ };
- rockchip,rk3228-timer
- rockchip,rk3229-timer
- rockchip,rk3368-timer
+ - rockchip,rk3576-timer
- rockchip,rk3588-timer
- rockchip,px30-timer
- const: rockchip,rk3288-timer
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ti,da830-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DaVinci Timer
+
+maintainers:
+ - Kousik Sanagavarapu <five231003@gmail.com>
+
+description: |
+ This is a 64-bit timer found on TI's DaVinci architecture devices. The timer
+ can be configured as a general-purpose 64-bit timer, dual general-purpose
+ 32-bit timers. When configured as dual 32-bit timers, each half can operate
+ in conjunction (chain mode) or independently (unchained mode) of each other.
+
+ The timer is a free running up-counter and can generate interrupts when the
+ counter reaches preset counter values.
+
+properties:
+ compatible:
+ const: ti,da830-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 10
+
+ interrupt-names:
+ minItems: 2
+ items:
+ - const: tint12
+ - const: tint34
+ - const: cmpint0
+ - const: cmpint1
+ - const: cmpint2
+ - const: cmpint3
+ - const: cmpint4
+ - const: cmpint5
+ - const: cmpint6
+ - const: cmpint7
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ timer@20000 {
+ compatible = "ti,da830-timer";
+ reg = <0x20000 0x1000>;
+ interrupts = <21>, <22>;
+ interrupt-names = "tint12", "tint34";
+ clocks = <&pll0_auxclk>;
+ };
+
+...
+++ /dev/null
-* Device tree bindings for Texas Instruments DaVinci timer
-
-This document provides bindings for the 64-bit timer in the DaVinci
-architecture devices. The timer can be configured as a general-purpose 64-bit
-timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
-timers, each half can operate in conjunction (chain mode) or independently
-(unchained mode) of each other.
-
-The timer is a free running up-counter and can generate interrupts when the
-counter reaches preset counter values.
-
-Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
-watchdog timers.
-
-Required properties:
-
-- compatible : should be "ti,da830-timer".
-- reg : specifies base physical address and count of the registers.
-- interrupts : interrupts generated by the timer.
-- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
- "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
- "cmpint7" ("cmpintX" may be omitted if not present in the
- hardware).
-- clocks : the clock feeding the timer clock.
-
-Example:
-
- clocksource: timer@20000 {
- compatible = "ti,da830-timer";
- reg = <0x20000 0x1000>;
- interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
- <80>, <81>;
- interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
- "cmpint2", "cmpint3", "cmpint4", "cmpint5",
- "cmpint6", "cmpint7";
- clocks = <&pll0_auxclk>;
- };
# Acbel fsg032 power supply
- acbel,fsg032
# SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
- - ad,ad7414
+ - ad,ad7414 # Deprecated, use adi,ad7414
+ - adi,ad7414
# ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems
- ad,adm9240
# AD5110 - Nonvolatile Digital Potentiometer
- adi,ad5110
- # Analog Devices ADP5585 Keypad Decoder and I/O Expansion
- - adi,adp5585
- # Analog Devices ADP5585 Keypad Decoder and I/O Expansion with support for Row5
- - adi,adp5585-02
# Analog Devices ADP5589 Keypad Decoder and I/O Expansion
- adi,adp5589
# Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher
- ams,iaq-core
# Temperature monitoring of Astera Labs PT5161L PCIe retimer
- asteralabs,pt5161l
- # i2c serial eeprom (24cxx)
- - at,24c08
# i2c h/w elliptic curve crypto module
- atmel,atecc508a
# ATSHA204 - i2c h/w symmetric crypto module
- dallas,ds1631
# Total-Elapsed-Time Recorder with Alarm
- dallas,ds1682
- # Tiny Digital Thermometer and Thermostat
- - dallas,ds1775
# CPU Peripheral Monitor
- dallas,ds1780
# CPU Supervisor with Nonvolatile Memory and Programmable I/O
- dallas,ds4510
- # Digital Thermometer and Thermostat
- - dallas,ds75
# Delta AHE-50DC Open19 power shelf fan control module
- delta,ahe50dc-fan
# Delta Electronics DPS-650-AB power supply
- isil,isl29030
# Intersil ISL68137 Digital Output Configurable PWM Controller
- isil,isl68137
+ # Intersil ISL69260 PMBus Voltage Regulator
+ - isil,isl69260
# Intersil ISL69269 PMBus Voltage Regulator
- isil,isl69269
# Intersil ISL76682 Ambient Light Sensor
- maxim,ds1803-100
# 10 kOhm digital potentiometer with I2C interface
- maxim,ds3502
- # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
- - maxim,max1237
# Temperature Sensor, I2C interface
- maxim,max1619
# 3-Channel Remote Temperature Sensor
- maxim,max5484
# PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion
- maxim,max6621
- # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
- - maxim,max6625
# mCube 3-axis 8-bit digital accelerometer
- mcube,mc3230
# Measurement Specialities I2C temperature and humidity sensor
- skyworks,sky81452
# SparkFun Qwiic Joystick (COM-15168) with i2c interface
- sparkfun,qwiic-joystick
- # i2c serial eeprom (24cxx)
- - st,24c256
# Sierra Wireless mangOH Green SPI IoT interface
- swir,mangoh-iotport-spi
# Ambient Light Sensor with SMBUS/Two Wire Serial Interface
- ti,tmp121
- ti,tmp122
- ti,tmp125
- # Digital Temperature Sensor
- - ti,tmp275
# TI DC-DC converter on PMBus
- ti,tps40400
# TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus
- ti,tps544b25
- ti,tps544c20
- ti,tps544c25
+ - ti,tps546d24
# I2C Touch-Screen Controller
- ti,tsc2003
# Vicor Corporation Digital Supervisor
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,ls1028a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale layerscape SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,ls1028a-dwc3
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,ls1028a-dwc3
+ - const: snps,dwc3
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: snps,dwc3.yaml#
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ usb@fe800000 {
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+ reg = <0xfe800000 0x100000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+++ /dev/null
-MSM SoC HSUSB controllers
-
-EHCI
-
-Required properties:
-- compatible: Should contain "qcom,ehci-host"
-- regs: offset and length of the register set in the memory map
-- usb-phy: phandle for the PHY device
-
-Example EHCI controller device node:
-
- ehci: ehci@f9a55000 {
- compatible = "qcom,ehci-host";
- reg = <0xf9a55000 0x400>;
- usb-phy = <&usb_otg>;
- };
-
-USB PHY with optional OTG:
-
-Required properties:
-- compatible: Should contain:
- "qcom,usb-otg-ci" for chipsets with ChipIdea 45nm PHY
- "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY
-
-- regs: Offset and length of the register set in the memory map
-- interrupts: interrupt-specifier for the OTG interrupt.
-
-- clocks: A list of phandle + clock-specifier pairs for the
- clocks listed in clock-names
-- clock-names: Should contain the following:
- "phy" USB PHY reference clock
- "core" Protocol engine clock
- "iface" Interface bus clock
- "alt_core" Protocol engine clock for targets with asynchronous
- reset methodology. (optional)
-
-- vdccx-supply: phandle to the regulator for the vdd supply for
- digital circuit operation.
-- v1p8-supply: phandle to the regulator for the 1.8V supply
-- v3p3-supply: phandle to the regulator for the 3.3V supply
-
-- resets: A list of phandle + reset-specifier pairs for the
- resets listed in reset-names
-- reset-names: Should contain the following:
- "phy" USB PHY controller reset
- "link" USB LINK controller reset
-
-- qcom,otg-control: OTG control (VBUS and ID notifications) can be one of
- 1 - PHY control
- 2 - PMIC control
-
-Optional properties:
-- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
-
-- switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual
- SPDT USB Switch, witch is controlled by GPIO to de/multiplex
- D+/D- USB lines between connectors.
-
-- qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device
- Mode Eye Diagram test. Start address at which these values will be
- written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as
- "do not overwrite default value at this address".
- For example: qcom,phy-init-sequence = < -1 0x63 >;
- Will update only value at address ULPI_EXT_VENDOR_SPECIFIC + 1.
-
-- qcom,phy-num: Select number of pyco-phy to use, can be one of
- 0 - PHY one, default
- 1 - Second PHY
- Some platforms may have configuration to allow USB
- controller work with any of the two HSPHYs present.
-
-- qcom,vdd-levels: This property must be a list of three integer values
- (no, min, max) where each value represents either a voltage
- in microvolts or a value corresponding to voltage corner.
-
-- qcom,manual-pullup: If present, vbus is not routed to USB controller/phy
- and controller driver therefore enables pull-up explicitly
- before starting controller using usbcmd run/stop bit.
-
-- extcon: phandles to external connector devices. First phandle
- should point to external connector, which provide "USB"
- cable events, the second should point to external connector
- device, which provide "USB-HOST" cable events. If one of
- the external connector devices is not required empty <0>
- phandle should be specified.
-
-Example HSUSB OTG controller device node:
-
- usb@f9a55000 {
- compatible = "qcom,usb-otg-snps";
- reg = <0xf9a55000 0x400>;
- interrupts = <0 134 0>;
- dr_mode = "peripheral";
-
- clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
- <&gcc GCC_USB_HS_AHB_CLK>;
-
- clock-names = "phy", "core", "iface";
-
- vddcx-supply = <&pm8841_s2_corner>;
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
-
- resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>;
- reset-names = "phy", "link";
-
- qcom,otg-control = <1>;
- qcom,phy-init-sequence = < -1 0x63 >;
- qcom,vdd-levels = <1 5 7>;
- };
- qcom,sm8550-dwc3
- qcom,sm8650-dwc3
- qcom,x1e80100-dwc3
+ - qcom,x1e80100-dwc3-mp
- const: qcom,dwc3
reg:
contains:
enum:
- qcom,ipq4019-dwc3
+ - qcom,ipq5332-dwc3
then:
properties:
clocks:
contains:
enum:
- qcom,ipq5018-dwc3
- - qcom,ipq5332-dwc3
- qcom,msm8994-dwc3
- qcom,qcs404-dwc3
then:
- qcom,sc8280xp-dwc3
- qcom,sc8280xp-dwc3-mp
- qcom,x1e80100-dwc3
+ - qcom,x1e80100-dwc3-mp
then:
properties:
clocks:
contains:
enum:
- qcom,ipq5332-dwc3
+ then:
+ properties:
+ interrupts:
+ maxItems: 3
+ interrupt-names:
+ items:
+ - const: pwr_event
+ - const: dp_hs_phy_irq
+ - const: dm_hs_phy_irq
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
- qcom,x1e80100-dwc3
then:
properties:
contains:
enum:
- qcom,sc8180x-dwc3-mp
+ - qcom,x1e80100-dwc3-mp
then:
properties:
interrupts:
compatible:
oneOf:
- const: ti,j721e-usb
- - const: ti,am64-usb
- items:
- - const: ti,j721e-usb
- const: ti,am64-usb
+ - const: ti,j721e-usb
reg:
maxItems: 1
description: Devantech, Ltd.
"^dfi,.*":
description: DFI Inc.
+ "^dfrobot,.*":
+ description: DFRobot Corporation
"^dh,.*":
description: DH electronics GmbH
"^difrnce,.*":
description: Lantiq Semiconductor
"^lattice,.*":
description: Lattice Semiconductor
+ "^lckfb,.*":
+ description: Shenzhen JLC Technology Group Co., Ltd.
"^lctech,.*":
description: Shenzen LC Technology Co., Ltd.
"^leadtek,.*":
description: Terasic Inc.
"^tesla,.*":
description: Tesla, Inc.
+ "^test,.*":
+ description: Reserved for use by tests. For example, KUnit.
"^tfc,.*":
description: Three Five Corp
"^thead,.*":
description: Turing Machines, Inc.
"^tyan,.*":
description: Tyan Computer Corporation
+ "^tyhx,.*":
+ description: NanjingTianyihexin Electronics Ltd.
"^u-blox,.*":
description: u-blox
"^u-boot,.*":
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/cirrus,ep9301-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP93xx Watchdog Timer
+
+maintainers:
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-wdt
+ - items:
+ - enum:
+ - cirrus,ep9302-wdt
+ - cirrus,ep9307-wdt
+ - cirrus,ep9312-wdt
+ - cirrus,ep9315-wdt
+ - const: cirrus,ep9301-wdt
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog@80940000 {
+ compatible = "cirrus,ep9301-wdt";
+ reg = <0x80940000 0x08>;
+ };
+++ /dev/null
-Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible : Should be "ti,davinci-wdt", "ti,keystone-wdt"
-- reg : Should contain WDT registers location and length
-
-Optional properties:
-- timeout-sec : Contains the watchdog timeout in seconds
-- clocks : the clock feeding the watchdog timer.
- Needed if platform uses clocks.
- See clock-bindings.txt
-
-Documentation:
-Davinci DM646x - https://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
-Keystone - https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
-
-Examples:
-
-wdt: wdt@2320000 {
- compatible = "ti,davinci-wdt";
- reg = <0x02320000 0x80>;
- timeout-sec = <30>;
- clocks = <&clkwdtimer0>;
-};
+++ /dev/null
-* NXP LPC18xx Watchdog Timer (WDT)
-
-Required properties:
-- compatible: Should be "nxp,lpc1850-wwdt"
-- reg: Should contain WDT registers location and length
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Should contain "wdtclk" and "reg"; the watchdog counter
- clock and register interface clock respectively.
-- interrupts: Should contain WDT interrupt
-
-Examples:
-
-watchdog@40080000 {
- compatible = "nxp,lpc1850-wwdt";
- reg = <0x40080000 0x24>;
- clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
- clock-names = "wdtclk", "reg";
- interrupts = <49>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/nxp,lpc1850-wwdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC18xx Watchdog Timer (WDT)
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+ compatible:
+ const: nxp,lpc1850-wwdt
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Watchdog counter clock
+ - description: Register interface clock
+
+ clock-names:
+ items:
+ - const: wdtclk
+ - const: reg
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-cgu.h>
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ watchdog@40080000 {
+ compatible = "nxp,lpc1850-wwdt";
+ reg = <0x40080000 0x24>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+ clock-names = "wdtclk", "reg";
+ interrupts = <49>;
+ };
- qcom,apss-wdt-msm8994
- qcom,apss-wdt-qcm2290
- qcom,apss-wdt-qcs404
+ - qcom,apss-wdt-sa8255p
- qcom,apss-wdt-sa8775p
- qcom,apss-wdt-sc7180
- qcom,apss-wdt-sc7280
- renesas,r8a779h0-wdt # R-Car V4M
- const: renesas,rcar-gen4-wdt # R-Car Gen4
+ - const: renesas,r9a09g057-wdt # RZ/V2H(P)
+
reg:
maxItems: 1
required:
- compatible
- reg
- - interrupts
- clocks
allOf:
compatible:
contains:
enum:
+ - renesas,r9a09g057-wdt
- renesas,rzg2l-wdt
- renesas,rzv2m-wdt
then:
interrupts:
maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a09g057-wdt
+ then:
+ properties:
+ interrupts: false
+ interrupt-names: false
+ else:
+ required:
+ - interrupts
+
additionalProperties: false
examples:
- rockchip,rk3368-wdt
- rockchip,rk3399-wdt
- rockchip,rk3568-wdt
+ - rockchip,rk3576-wdt
- rockchip,rk3588-wdt
- rockchip,rv1108-wdt
- const: snps,dw-wdt
minItems: 1
maxItems: 2
+ interrupts:
+ maxItems: 1
+ description: Pre-timeout interrupt from the watchdog.
+
+ wakeup-source: true
+
required:
- compatible
- reg
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/ti,davinci-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DaVinci/Keystone Watchdog Timer Controller
+
+maintainers:
+ - Kousik Sanagavarapu <five231003@gmail.com>
+
+description: |
+ TI's Watchdog Timer Controller for DaVinci and Keystone Processors.
+
+ Datasheets
+
+ Davinci DM646x - https://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
+ Keystone - https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: ti,keystone-wdt
+ - const: ti,davinci-wdt
+ - items:
+ - const: ti,davinci-wdt
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ wdt: watchdog@22f0080 {
+ compatible = "ti,keystone-wdt", "ti,davinci-wdt";
+ reg = <0x022f0080 0x80>;
+ clocks = <&clkwdtimer0>;
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/zii,rave-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac RAVE Watchdog Timer
+
+maintainers:
+ - Martyn Welch <martyn.welch@collabora.co.uk>
+ - Guenter Roeck <linux@roeck-us.net>
+ - Wim Van Sebroeck <wim@iguana.be>
+
+properties:
+ compatible:
+ const: zii,rave-wdt
+
+ reg:
+ maxItems: 1
+ description: i2c slave address of device, usually 0x38
+
+ reset-duration-ms:
+ description:
+ Duration of the pulse generated when the watchdog times
+ out.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: watchdog.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ watchdog@38 {
+ compatible = "zii,rave-wdt";
+ reg = <0x38>;
+ timeout-sec = <30>;
+ reset-duration-ms = <30>;
+ };
+ };
+
+++ /dev/null
-Zodiac RAVE Watchdog Timer
-
-Required properties:
-- compatible: must be "zii,rave-wdt"
-- reg: i2c slave address of device, usually 0x38
-
-Optional Properties:
-- timeout-sec: Watchdog timeout value in seconds.
-- reset-duration-ms: Duration of the pulse generated when the watchdog times
- out. Value in milliseconds.
-
-Example:
-
- watchdog@38 {
- compatible = "zii,rave-wdt";
- reg = <0x38>;
- timeout-sec = <30>;
- reset-duration-ms = <30>;
- };
ifeq ($(ARCH),)
ALL_DTS := $(shell find src/* -name \*.dts)
+ALL_DTSO := $(shell find src/* -name \*.dtso)
ALL_DTB := $(patsubst %.dts,%.dtb,$(ALL_DTS))
+ALL_DTBO := $(patsubst %.dtso,%.dtbo,$(ALL_DTSO))
-$(ALL_DTB): ARCH=$(word 2,$(subst /, ,$@))
-$(ALL_DTB): FORCE
+$(ALL_DTB) $(ALL_DTBO): ARCH=$(word 2,$(subst /, ,$@))
+$(ALL_DTB) $(ALL_DTBO): FORCE
$(Q)$(MAKE) ARCH=$(ARCH) $@
else
ARCH_DTS := $(shell find src/$(ARCH) -name \*.dts)
+ARCH_DTSO := $(shell find src/$(ARCH) -name \*.dtso)
ARCH_DTB := $(patsubst %.dts,%.dtb,$(ARCH_DTS))
+ARCH_DTBO := $(patsubst %.dtso,%.dtbo,$(ARCH_DTSO))
src := src/$(ARCH)
obj := src/$(ARCH)
include scripts/Kbuild.include
-cmd_files := $(wildcard $(foreach f,$(ARCH_DTB),$(dir $(f)).$(notdir $(f)).cmd))
+cmd_files := $(wildcard $(foreach f,$(ARCH_DTB) $(ARCH_DTBO),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
include $(cmd_files)
$(obj)/%.dtb: $(src)/%.dts FORCE
$(call if_changed_dep,dtc)
+quiet_cmd_dtco = DTCO $@
+cmd_dtco = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+ $(DTC) -@ -O dtb -o $@ -b 0 \
+ -i $(src) $(DTC_FLAGS) \
+ -d $(depfile).dtc.tmp $(dtc-tmp) ; \
+ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
+
+$(obj)/%.dtbo: $(src)/%.dtso FORCE
+ $(call if_changed_dep,dtco)
+
PHONY += all_arch
-all_arch: $(ARCH_DTB)
+all_arch: $(ARCH_DTB) $(ARCH_DTBO)
@:
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
-o -name .pc -o -name .hg -o -name .git \) -prune -o
PHONY += clean_arch
-clean_arch: __clean-files = $(ARCH_DTB)
+clean_arch: __clean-files = $(ARCH_DTB) $(ARCH_DTBO)
clean_arch: FORCE
$(call cmd,clean)
@find . $(RCS_FIND_IGNORE) \
#define QCOM_ID_SA8540P 461
#define QCOM_ID_QCM4290 469
#define QCOM_ID_QCS4290 470
+#define QCOM_ID_SM7325 475
#define QCOM_ID_SM8450_2 480
#define QCOM_ID_SM8450_3 482
#define QCOM_ID_SC7280 487
#define QCOM_ID_SC7180P 495
#define QCOM_ID_QCM6490 497
+#define QCOM_ID_SM7325P 499
#define QCOM_ID_IPQ5000 503
#define QCOM_ID_IPQ0509 504
#define QCOM_ID_IPQ0518 505
#define QCOM_ID_QCM8550 604
#define QCOM_ID_IPQ5300 624
#define QCOM_ID_IPQ5321 650
+#define QCOM_ID_QCS8300 674
+#define QCOM_ID_QCS8275 675
/*
* The board type and revision information, used by Qualcomm bootloaders and
#define PMC_CPU (PMC_MAIN + 9)
#define PMC_MCK1 (PMC_MAIN + 10)
+/* SAM9X7 */
+#define PMC_PLLADIV2 (PMC_MAIN + 11)
+#define PMC_LVDSPLL (PMC_MAIN + 12)
+
#ifndef AT91_PMC_MOSCS
#define AT91_PMC_MOSCS 0 /* MOSCS Flag */
#define AT91_PMC_LOCKA 1 /* PLLA Lock */
#define AUD_CLKID_SYSCLK_B_DIV 175
#define AUD_CLKID_SYSCLK_A_EN 176
#define AUD_CLKID_SYSCLK_B_EN 177
+#define AUD_CLKID_EARCRX 178
+#define AUD_CLKID_EARCRX_CMDC_SEL 179
+#define AUD_CLKID_EARCRX_CMDC_DIV 180
+#define AUD_CLKID_EARCRX_CMDC 181
+#define AUD_CLKID_EARCRX_DMAC_SEL 182
+#define AUD_CLKID_EARCRX_DMAC_DIV 183
+#define AUD_CLKID_EARCRX_DMAC 184
#endif /* __AXG_AUDIO_CLKC_BINDINGS_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+#ifndef DT_BINDINGS_CIRRUS_EP93XX_CLOCK_H
+#define DT_BINDINGS_CIRRUS_EP93XX_CLOCK_H
+
+#define EP93XX_CLK_PLL1 0
+#define EP93XX_CLK_PLL2 1
+
+#define EP93XX_CLK_FCLK 2
+#define EP93XX_CLK_HCLK 3
+#define EP93XX_CLK_PCLK 4
+
+#define EP93XX_CLK_UART 5
+#define EP93XX_CLK_SPI 6
+#define EP93XX_CLK_PWM 7
+#define EP93XX_CLK_USB 8
+
+#define EP93XX_CLK_M2M0 9
+#define EP93XX_CLK_M2M1 10
+
+#define EP93XX_CLK_M2P0 11
+#define EP93XX_CLK_M2P1 12
+#define EP93XX_CLK_M2P2 13
+#define EP93XX_CLK_M2P3 14
+#define EP93XX_CLK_M2P4 15
+#define EP93XX_CLK_M2P5 16
+#define EP93XX_CLK_M2P6 17
+#define EP93XX_CLK_M2P7 18
+#define EP93XX_CLK_M2P8 19
+#define EP93XX_CLK_M2P9 20
+
+#define EP93XX_CLK_UART1 21
+#define EP93XX_CLK_UART2 22
+#define EP93XX_CLK_UART3 23
+
+#define EP93XX_CLK_ADC 24
+#define EP93XX_CLK_ADC_EN 25
+
+#define EP93XX_CLK_KEYPAD 26
+
+#define EP93XX_CLK_VIDEO 27
+
+#define EP93XX_CLK_I2S_MCLK 28
+#define EP93XX_CLK_I2S_SCLK 29
+#define EP93XX_CLK_I2S_LRCLK 30
+
+#endif /* DT_BINDINGS_CIRRUS_EP93XX_CLOCK_H */
#define CLK_GOUT_FSYS_MMC_EMBD 58
#define CLK_GOUT_FSYS_MMC_SDIO 59
#define CLK_GOUT_FSYS_USB30DRD 60
+#define CLK_MOUT_SHARED0_PLL 61
+#define CLK_MOUT_SHARED1_PLL 62
/* CMU_CORE */
#define CLK_MOUT_CORE_BUS_USER 1
#define CLK_GOUT_WDT1_PCLK 43
/* CMU_FSYS */
-#define CLK_MOUT_FSYS_BUS_USER 1
-#define CLK_MOUT_FSYS_MMC_CARD_USER 2
-#define CLK_MOUT_FSYS_MMC_EMBD_USER 3
-#define CLK_MOUT_FSYS_MMC_SDIO_USER 4
-#define CLK_MOUT_FSYS_USB30DRD_USER 4
-#define CLK_GOUT_MMC_CARD_ACLK 5
-#define CLK_GOUT_MMC_CARD_SDCLKIN 6
-#define CLK_GOUT_MMC_EMBD_ACLK 7
-#define CLK_GOUT_MMC_EMBD_SDCLKIN 8
-#define CLK_GOUT_MMC_SDIO_ACLK 9
-#define CLK_GOUT_MMC_SDIO_SDCLKIN 10
+#define CLK_MOUT_FSYS_BUS_USER 1
+#define CLK_MOUT_FSYS_MMC_CARD_USER 2
+#define CLK_MOUT_FSYS_MMC_EMBD_USER 3
+#define CLK_MOUT_FSYS_MMC_SDIO_USER 4
+#define CLK_GOUT_MMC_CARD_ACLK 5
+#define CLK_GOUT_MMC_CARD_SDCLKIN 6
+#define CLK_GOUT_MMC_EMBD_ACLK 7
+#define CLK_GOUT_MMC_EMBD_SDCLKIN 8
+#define CLK_GOUT_MMC_SDIO_ACLK 9
+#define CLK_GOUT_MMC_SDIO_SDCLKIN 10
+#define CLK_MOUT_FSYS_USB30DRD_USER 11
+#define CLK_MOUT_USB_PLL 12
+#define CLK_FOUT_USB_PLL 13
+#define CLK_FSYS_USB20PHY_CLKCORE 14
+#define CLK_FSYS_USB30DRD_ACLK_20PHYCTRL 15
+#define CLK_FSYS_USB30DRD_ACLK_30PHYCTRL_0 16
+#define CLK_FSYS_USB30DRD_ACLK_30PHYCTRL_1 17
+#define CLK_FSYS_USB30DRD_BUS_CLK_EARLY 18
+#define CLK_FSYS_USB30DRD_REF_CLK 19
#endif /* _DT_BINDINGS_CLOCK_EXYNOS_7885_H */
#define CLK_GOUT_UART_PCLK 32
#define CLK_GOUT_WDT0_PCLK 33
#define CLK_GOUT_WDT1_PCLK 34
+#define CLK_GOUT_BUSIF_TMU_PCLK 35
/* CMU_CORE */
#define CLK_MOUT_CORE_BUS_USER 1
#define IMX95_CLK_DISPMIX_ENG0_SEL 0
#define IMX95_CLK_DISPMIX_ENG1_SEL 1
+#define IMX95_CLK_NETCMIX_ENETC0_RMII 0
+#define IMX95_CLK_NETCMIX_ENETC1_RMII 1
+
#endif /* __DT_BINDINGS_CLOCK_IMX95_H */
#define PCLK_CIF 352
#define PCLK_OTP_PHY 353
-#define CLK_NR_CLKS (PCLK_OTP_PHY + 1)
-
/* pmu-clocks indices */
#define PLL_GPLL 1
#define PCLK_GPIO0_PMU 20
#define PCLK_UART0_PMU 21
-#define CLKPMU_NR_CLKS (PCLK_UART0_PMU + 1)
-
/* soft-reset indices */
#define SRST_CORE0_PO 0
#define SRST_CORE1_PO 1
#define GCC_MMSS_GPLL0_DIV_CLK 184
#define GCC_GPU_GPLL0_DIV_CLK 185
#define GCC_GPU_GPLL0_CLK 186
+#define HLOS1_VOTE_LPASS_CORE_SMMU_CLK 187
+#define HLOS1_VOTE_LPASS_ADSP_SMMU_CLK 188
+#define GCC_MSS_Q6_BIMC_AXI_CLK 189
#define PCIE_0_GDSC 0
#define UFS_GDSC 1
#define USB_30_GDSC 2
+#define LPASS_ADSP_GDSC 3
+#define LPASS_CORE_GDSC 4
#define GCC_BLSP1_QUP1_BCR 0
#define GCC_BLSP1_QUP2_BCR 1
#define GCC_USB3_SEC_CLKREF_CLK 238
#define GCC_UFS_MEM_CLKREF_EN 239
#define GCC_UFS_CARD_CLKREF_EN 240
+#define GPLL9 241
#define GCC_EMAC_BCR 0
#define GCC_GPU_BCR 1
#define GCC_VIDEO_AXI0_CLK_BCR 42
#define GCC_VIDEO_AXI1_CLK_BCR 43
#define GCC_USB3_DP_PHY_SEC_BCR 44
+#define GCC_USB3_UNIPHY_MP0_BCR 45
+#define GCC_USB3_UNIPHY_MP1_BCR 46
+#define GCC_USB3UNIPHY_PHY_MP0_BCR 47
+#define GCC_USB3UNIPHY_PHY_MP1_BCR 48
/* GCC GDSCRs */
#define EMAC_GDSC 0
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SM4450_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SM4450_H
+
+/* CAM_CC clocks */
+#define CAM_CC_BPS_AHB_CLK 0
+#define CAM_CC_BPS_AREG_CLK 1
+#define CAM_CC_BPS_CLK 2
+#define CAM_CC_BPS_CLK_SRC 3
+#define CAM_CC_CAMNOC_ATB_CLK 4
+#define CAM_CC_CAMNOC_AXI_CLK 5
+#define CAM_CC_CAMNOC_AXI_CLK_SRC 6
+#define CAM_CC_CAMNOC_AXI_HF_CLK 7
+#define CAM_CC_CAMNOC_AXI_SF_CLK 8
+#define CAM_CC_CCI_0_CLK 9
+#define CAM_CC_CCI_0_CLK_SRC 10
+#define CAM_CC_CCI_1_CLK 11
+#define CAM_CC_CCI_1_CLK_SRC 12
+#define CAM_CC_CORE_AHB_CLK 13
+#define CAM_CC_CPAS_AHB_CLK 14
+#define CAM_CC_CPHY_RX_CLK_SRC 15
+#define CAM_CC_CRE_AHB_CLK 16
+#define CAM_CC_CRE_CLK 17
+#define CAM_CC_CRE_CLK_SRC 18
+#define CAM_CC_CSI0PHYTIMER_CLK 19
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC 20
+#define CAM_CC_CSI1PHYTIMER_CLK 21
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC 22
+#define CAM_CC_CSI2PHYTIMER_CLK 23
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC 24
+#define CAM_CC_CSIPHY0_CLK 25
+#define CAM_CC_CSIPHY1_CLK 26
+#define CAM_CC_CSIPHY2_CLK 27
+#define CAM_CC_FAST_AHB_CLK_SRC 28
+#define CAM_CC_ICP_ATB_CLK 29
+#define CAM_CC_ICP_CLK 30
+#define CAM_CC_ICP_CLK_SRC 31
+#define CAM_CC_ICP_CTI_CLK 32
+#define CAM_CC_ICP_TS_CLK 33
+#define CAM_CC_MCLK0_CLK 34
+#define CAM_CC_MCLK0_CLK_SRC 35
+#define CAM_CC_MCLK1_CLK 36
+#define CAM_CC_MCLK1_CLK_SRC 37
+#define CAM_CC_MCLK2_CLK 38
+#define CAM_CC_MCLK2_CLK_SRC 39
+#define CAM_CC_MCLK3_CLK 40
+#define CAM_CC_MCLK3_CLK_SRC 41
+#define CAM_CC_OPE_0_AHB_CLK 42
+#define CAM_CC_OPE_0_AREG_CLK 43
+#define CAM_CC_OPE_0_CLK 44
+#define CAM_CC_OPE_0_CLK_SRC 45
+#define CAM_CC_PLL0 46
+#define CAM_CC_PLL0_OUT_EVEN 47
+#define CAM_CC_PLL0_OUT_ODD 48
+#define CAM_CC_PLL1 49
+#define CAM_CC_PLL1_OUT_EVEN 50
+#define CAM_CC_PLL2 51
+#define CAM_CC_PLL2_OUT_EVEN 52
+#define CAM_CC_PLL3 53
+#define CAM_CC_PLL3_OUT_EVEN 54
+#define CAM_CC_PLL4 55
+#define CAM_CC_PLL4_OUT_EVEN 56
+#define CAM_CC_SLOW_AHB_CLK_SRC 57
+#define CAM_CC_SOC_AHB_CLK 58
+#define CAM_CC_SYS_TMR_CLK 59
+#define CAM_CC_TFE_0_AHB_CLK 60
+#define CAM_CC_TFE_0_CLK 61
+#define CAM_CC_TFE_0_CLK_SRC 62
+#define CAM_CC_TFE_0_CPHY_RX_CLK 63
+#define CAM_CC_TFE_0_CSID_CLK 64
+#define CAM_CC_TFE_0_CSID_CLK_SRC 65
+#define CAM_CC_TFE_1_AHB_CLK 66
+#define CAM_CC_TFE_1_CLK 67
+#define CAM_CC_TFE_1_CLK_SRC 68
+#define CAM_CC_TFE_1_CPHY_RX_CLK 69
+#define CAM_CC_TFE_1_CSID_CLK 70
+#define CAM_CC_TFE_1_CSID_CLK_SRC 71
+
+/* CAM_CC power domains */
+#define CAM_CC_CAMSS_TOP_GDSC 0
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR 0
+#define CAM_CC_CAMNOC_BCR 1
+#define CAM_CC_CAMSS_TOP_BCR 2
+#define CAM_CC_CCI_0_BCR 3
+#define CAM_CC_CCI_1_BCR 4
+#define CAM_CC_CPAS_BCR 5
+#define CAM_CC_CRE_BCR 6
+#define CAM_CC_CSI0PHY_BCR 7
+#define CAM_CC_CSI1PHY_BCR 8
+#define CAM_CC_CSI2PHY_BCR 9
+#define CAM_CC_ICP_BCR 10
+#define CAM_CC_MCLK0_BCR 11
+#define CAM_CC_MCLK1_BCR 12
+#define CAM_CC_MCLK2_BCR 13
+#define CAM_CC_MCLK3_BCR 14
+#define CAM_CC_OPE_0_BCR 15
+#define CAM_CC_TFE_0_BCR 16
+#define CAM_CC_TFE_1_BCR 17
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM4450_H
+#define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM4450_H
+
+/* DISP_CC clocks */
+#define DISP_CC_MDSS_AHB1_CLK 0
+#define DISP_CC_MDSS_AHB_CLK 1
+#define DISP_CC_MDSS_AHB_CLK_SRC 2
+#define DISP_CC_MDSS_BYTE0_CLK 3
+#define DISP_CC_MDSS_BYTE0_CLK_SRC 4
+#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 5
+#define DISP_CC_MDSS_BYTE0_INTF_CLK 6
+#define DISP_CC_MDSS_ESC0_CLK 7
+#define DISP_CC_MDSS_ESC0_CLK_SRC 8
+#define DISP_CC_MDSS_MDP1_CLK 9
+#define DISP_CC_MDSS_MDP_CLK 10
+#define DISP_CC_MDSS_MDP_CLK_SRC 11
+#define DISP_CC_MDSS_MDP_LUT1_CLK 12
+#define DISP_CC_MDSS_MDP_LUT_CLK 13
+#define DISP_CC_MDSS_NON_GDSC_AHB_CLK 14
+#define DISP_CC_MDSS_PCLK0_CLK 15
+#define DISP_CC_MDSS_PCLK0_CLK_SRC 16
+#define DISP_CC_MDSS_ROT1_CLK 17
+#define DISP_CC_MDSS_ROT_CLK 18
+#define DISP_CC_MDSS_ROT_CLK_SRC 19
+#define DISP_CC_MDSS_RSCC_AHB_CLK 20
+#define DISP_CC_MDSS_RSCC_VSYNC_CLK 21
+#define DISP_CC_MDSS_VSYNC1_CLK 22
+#define DISP_CC_MDSS_VSYNC_CLK 23
+#define DISP_CC_MDSS_VSYNC_CLK_SRC 24
+#define DISP_CC_PLL0 25
+#define DISP_CC_PLL1 26
+#define DISP_CC_SLEEP_CLK 27
+#define DISP_CC_SLEEP_CLK_SRC 28
+#define DISP_CC_XO_CLK 29
+#define DISP_CC_XO_CLK_SRC 30
+
+/* DISP_CC power domains */
+#define DISP_CC_MDSS_CORE_GDSC 0
+#define DISP_CC_MDSS_CORE_INT2_GDSC 1
+
+/* DISP_CC resets */
+#define DISP_CC_MDSS_CORE_BCR 0
+#define DISP_CC_MDSS_CORE_INT2_BCR 1
+#define DISP_CC_MDSS_RSCC_BCR 2
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM4450_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM4450_H
+
+/* GPU_CC clocks */
+#define GPU_CC_AHB_CLK 0
+#define GPU_CC_CB_CLK 1
+#define GPU_CC_CRC_AHB_CLK 2
+#define GPU_CC_CX_FF_CLK 3
+#define GPU_CC_CX_GFX3D_CLK 4
+#define GPU_CC_CX_GFX3D_SLV_CLK 5
+#define GPU_CC_CX_GMU_CLK 6
+#define GPU_CC_CX_SNOC_DVM_CLK 7
+#define GPU_CC_CXO_AON_CLK 8
+#define GPU_CC_CXO_CLK 9
+#define GPU_CC_DEMET_CLK 10
+#define GPU_CC_DEMET_DIV_CLK_SRC 11
+#define GPU_CC_FF_CLK_SRC 12
+#define GPU_CC_FREQ_MEASURE_CLK 13
+#define GPU_CC_GMU_CLK_SRC 14
+#define GPU_CC_GX_CXO_CLK 15
+#define GPU_CC_GX_FF_CLK 16
+#define GPU_CC_GX_GFX3D_CLK 17
+#define GPU_CC_GX_GFX3D_CLK_SRC 18
+#define GPU_CC_GX_GFX3D_RDVM_CLK 19
+#define GPU_CC_GX_GMU_CLK 20
+#define GPU_CC_GX_VSENSE_CLK 21
+#define GPU_CC_HUB_AHB_DIV_CLK_SRC 22
+#define GPU_CC_HUB_AON_CLK 23
+#define GPU_CC_HUB_CLK_SRC 24
+#define GPU_CC_HUB_CX_INT_CLK 25
+#define GPU_CC_HUB_CX_INT_DIV_CLK_SRC 26
+#define GPU_CC_MEMNOC_GFX_CLK 27
+#define GPU_CC_MND1X_0_GFX3D_CLK 28
+#define GPU_CC_PLL0 29
+#define GPU_CC_PLL1 30
+#define GPU_CC_SLEEP_CLK 31
+#define GPU_CC_XO_CLK_SRC 32
+#define GPU_CC_XO_DIV_CLK_SRC 33
+
+/* GPU_CC power domains */
+#define GPU_CC_CX_GDSC 0
+#define GPU_CC_GX_GDSC 1
+
+/* GPU_CC resets */
+#define GPU_CC_ACD_BCR 0
+#define GPU_CC_CB_BCR 1
+#define GPU_CC_CX_BCR 2
+#define GPU_CC_FAST_HUB_BCR 3
+#define GPU_CC_FF_BCR 4
+#define GPU_CC_GFX3D_AON_BCR 5
+#define GPU_CC_GMU_BCR 6
+#define GPU_CC_GX_BCR 7
+#define GPU_CC_XO_BCR 8
+#define GPU_CC_GX_ACD_IROOT_BCR 9
+#define GPU_CC_RBCPR_BCR 10
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SM8150_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SM8150_H
+
+/* CAM_CC clocks */
+#define CAM_CC_PLL0 0
+#define CAM_CC_PLL0_OUT_EVEN 1
+#define CAM_CC_PLL0_OUT_ODD 2
+#define CAM_CC_PLL1 3
+#define CAM_CC_PLL1_OUT_EVEN 4
+#define CAM_CC_PLL2 5
+#define CAM_CC_PLL2_OUT_MAIN 6
+#define CAM_CC_PLL3 7
+#define CAM_CC_PLL3_OUT_EVEN 8
+#define CAM_CC_PLL4 9
+#define CAM_CC_PLL4_OUT_EVEN 10
+#define CAM_CC_BPS_AHB_CLK 11
+#define CAM_CC_BPS_AREG_CLK 12
+#define CAM_CC_BPS_AXI_CLK 13
+#define CAM_CC_BPS_CLK 14
+#define CAM_CC_BPS_CLK_SRC 15
+#define CAM_CC_CAMNOC_AXI_CLK 16
+#define CAM_CC_CAMNOC_AXI_CLK_SRC 17
+#define CAM_CC_CAMNOC_DCD_XO_CLK 18
+#define CAM_CC_CCI_0_CLK 19
+#define CAM_CC_CCI_0_CLK_SRC 20
+#define CAM_CC_CCI_1_CLK 21
+#define CAM_CC_CCI_1_CLK_SRC 22
+#define CAM_CC_CORE_AHB_CLK 23
+#define CAM_CC_CPAS_AHB_CLK 24
+#define CAM_CC_CPHY_RX_CLK_SRC 25
+#define CAM_CC_CSI0PHYTIMER_CLK 26
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC 27
+#define CAM_CC_CSI1PHYTIMER_CLK 28
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC 29
+#define CAM_CC_CSI2PHYTIMER_CLK 30
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC 31
+#define CAM_CC_CSI3PHYTIMER_CLK 32
+#define CAM_CC_CSI3PHYTIMER_CLK_SRC 33
+#define CAM_CC_CSIPHY0_CLK 34
+#define CAM_CC_CSIPHY1_CLK 35
+#define CAM_CC_CSIPHY2_CLK 36
+#define CAM_CC_CSIPHY3_CLK 37
+#define CAM_CC_FAST_AHB_CLK_SRC 38
+#define CAM_CC_FD_CORE_CLK 39
+#define CAM_CC_FD_CORE_CLK_SRC 40
+#define CAM_CC_FD_CORE_UAR_CLK 41
+#define CAM_CC_GDSC_CLK 42
+#define CAM_CC_ICP_AHB_CLK 43
+#define CAM_CC_ICP_CLK 44
+#define CAM_CC_ICP_CLK_SRC 45
+#define CAM_CC_IFE_0_AXI_CLK 46
+#define CAM_CC_IFE_0_CLK 47
+#define CAM_CC_IFE_0_CLK_SRC 48
+#define CAM_CC_IFE_0_CPHY_RX_CLK 49
+#define CAM_CC_IFE_0_CSID_CLK 50
+#define CAM_CC_IFE_0_CSID_CLK_SRC 51
+#define CAM_CC_IFE_0_DSP_CLK 52
+#define CAM_CC_IFE_1_AXI_CLK 53
+#define CAM_CC_IFE_1_CLK 54
+#define CAM_CC_IFE_1_CLK_SRC 55
+#define CAM_CC_IFE_1_CPHY_RX_CLK 56
+#define CAM_CC_IFE_1_CSID_CLK 57
+#define CAM_CC_IFE_1_CSID_CLK_SRC 58
+#define CAM_CC_IFE_1_DSP_CLK 59
+#define CAM_CC_IFE_LITE_0_CLK 60
+#define CAM_CC_IFE_LITE_0_CLK_SRC 61
+#define CAM_CC_IFE_LITE_0_CPHY_RX_CLK 62
+#define CAM_CC_IFE_LITE_0_CSID_CLK 63
+#define CAM_CC_IFE_LITE_0_CSID_CLK_SRC 64
+#define CAM_CC_IFE_LITE_1_CLK 65
+#define CAM_CC_IFE_LITE_1_CLK_SRC 66
+#define CAM_CC_IFE_LITE_1_CPHY_RX_CLK 67
+#define CAM_CC_IFE_LITE_1_CSID_CLK 68
+#define CAM_CC_IFE_LITE_1_CSID_CLK_SRC 69
+#define CAM_CC_IPE_0_AHB_CLK 70
+#define CAM_CC_IPE_0_AREG_CLK 71
+#define CAM_CC_IPE_0_AXI_CLK 72
+#define CAM_CC_IPE_0_CLK 73
+#define CAM_CC_IPE_0_CLK_SRC 74
+#define CAM_CC_IPE_1_AHB_CLK 75
+#define CAM_CC_IPE_1_AREG_CLK 76
+#define CAM_CC_IPE_1_AXI_CLK 77
+#define CAM_CC_IPE_1_CLK 78
+#define CAM_CC_JPEG_CLK 79
+#define CAM_CC_JPEG_CLK_SRC 80
+#define CAM_CC_LRME_CLK 81
+#define CAM_CC_LRME_CLK_SRC 82
+#define CAM_CC_MCLK0_CLK 83
+#define CAM_CC_MCLK0_CLK_SRC 84
+#define CAM_CC_MCLK1_CLK 85
+#define CAM_CC_MCLK1_CLK_SRC 86
+#define CAM_CC_MCLK2_CLK 87
+#define CAM_CC_MCLK2_CLK_SRC 88
+#define CAM_CC_MCLK3_CLK 89
+#define CAM_CC_MCLK3_CLK_SRC 90
+#define CAM_CC_SLOW_AHB_CLK_SRC 91
+
+/* CAM_CC power domains */
+#define TITAN_TOP_GDSC 0
+#define BPS_GDSC 1
+#define IFE_0_GDSC 2
+#define IFE_1_GDSC 3
+#define IPE_0_GDSC 4
+#define IPE_1_GDSC 5
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR 0
+#define CAM_CC_CAMNOC_BCR 1
+#define CAM_CC_CCI_BCR 2
+#define CAM_CC_CPAS_BCR 3
+#define CAM_CC_CSI0PHY_BCR 4
+#define CAM_CC_CSI1PHY_BCR 5
+#define CAM_CC_CSI2PHY_BCR 6
+#define CAM_CC_CSI3PHY_BCR 7
+#define CAM_CC_FD_BCR 8
+#define CAM_CC_ICP_BCR 9
+#define CAM_CC_IFE_0_BCR 10
+#define CAM_CC_IFE_1_BCR 11
+#define CAM_CC_IFE_LITE_0_BCR 12
+#define CAM_CC_IFE_LITE_1_BCR 13
+#define CAM_CC_IPE_0_BCR 14
+#define CAM_CC_IPE_1_BCR 15
+#define CAM_CC_JPEG_BCR 16
+#define CAM_CC_LRME_BCR 17
+#define CAM_CC_MCLK0_BCR 18
+#define CAM_CC_MCLK1_BCR 19
+#define CAM_CC_MCLK2_BCR 20
+#define CAM_CC_MCLK3_BCR 21
+
+#endif
/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
/*
- * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved
- * Copyright (c) 2023, Linaro Ltd.
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
*/
-#ifndef _DT_BINDINGS_CLK_QCOM_SM8650_DISP_CC_H
-#define _DT_BINDINGS_CLK_QCOM_SM8650_DISP_CC_H
+#ifndef _DT_BINDINGS_CLK_QCOM_SM8550_DISP_CC_H
+#define _DT_BINDINGS_CLK_QCOM_SM8550_DISP_CC_H
/* DISP_CC clocks */
#define DISP_CC_MDSS_ACCU_CLK 0
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__
+#define __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* Core Clock list */
+#define R9A09G057_SYS_0_PCLK 0
+#define R9A09G057_CA55_0_CORE_CLK0 1
+#define R9A09G057_CA55_0_CORE_CLK1 2
+#define R9A09G057_CA55_0_CORE_CLK2 3
+#define R9A09G057_CA55_0_CORE_CLK3 4
+#define R9A09G057_CA55_0_PERIPHCLK 5
+#define R9A09G057_CM33_CLK0 6
+#define R9A09G057_CST_0_SWCLKTCK 7
+#define R9A09G057_IOTOP_0_SHCLK 8
+
+#endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ */
#define HCLK_CPU 477
#define HCLK_PERI 478
-#define CLK_NR_CLKS (HCLK_PERI + 1)
-
/* soft-reset indices */
#define SRST_CORE0 0
#define SRST_CORE1 1
#define HCLK_S_CRYPTO 477
#define HCLK_PERI 478
-#define CLK_NR_CLKS (HCLK_PERI + 1)
-
/* soft-reset indices */
#define SRST_CORE0_PO 0
#define SRST_CORE1_PO 1
#define HCLK_CPU 477
#define HCLK_PERI 478
-#define CLK_NR_CLKS (HCLK_PERI + 1)
-
/* soft-reset indices */
#define SRST_CORE0 0
#define SRST_CORE1 1
#define PCLK_CAN 233
#define PCLK_OWIRE 234
-#define CLK_NR_CLKS (PCLK_OWIRE + 1)
-
/* soft-reset indices */
/* cru_softrst_con0 */
#define HCLK_RGA 340
#define HCLK_HDCP 341
-#define CLK_NR_CLKS (HCLK_HDCP + 1)
-
/* soft-reset indices */
#define SRST_CORE0_PO 0
#define SRST_CORE1_PO 1
#define HCLK_BUS 477
#define HCLK_PERI 478
-#define CLK_NR_CLKS (HCLK_PERI + 1)
-
/* soft-reset indices */
#define SRST_CORE_B0 0
#define SRST_CORE_B1 1
#define HCLK_SDIO_NOC 495
#define HCLK_SDIOAUDIO_NOC 496
-#define CLK_NR_CLKS (HCLK_SDIOAUDIO_NOC + 1)
-
/* pmu-clocks indices */
#define PLL_PPLL 1
#define PCLK_INTR_ARB_PMU 49
#define HCLK_NOC_PMU 50
-#define CLKPMU_NR_CLKS (HCLK_NOC_PMU + 1)
-
/* soft-reset indices */
/* cru_softrst_con0 */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co. Ltd.
+ * Copyright (c) 2024 Collabora Ltd.
+ *
+ * Author: Elaine Zhang <zhangqing@rock-chips.com>
+ * Author: Detlev Casanova <detlev.casanova@collabora.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3576_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3576_H
+
+/* cru-clocks indices */
+
+/* cru plls */
+#define PLL_BPLL 0
+#define PLL_LPLL 1
+#define PLL_VPLL 2
+#define PLL_AUPLL 3
+#define PLL_CPLL 4
+#define PLL_GPLL 5
+#define PLL_PPLL 6
+#define ARMCLK_L 7
+#define ARMCLK_B 8
+
+/* cru clocks */
+#define CLK_CPLL_DIV20 9
+#define CLK_CPLL_DIV10 10
+#define CLK_GPLL_DIV8 11
+#define CLK_GPLL_DIV6 12
+#define CLK_CPLL_DIV4 13
+#define CLK_GPLL_DIV4 14
+#define CLK_SPLL_DIV2 15
+#define CLK_GPLL_DIV3 16
+#define CLK_CPLL_DIV2 17
+#define CLK_GPLL_DIV2 18
+#define CLK_SPLL_DIV1 19
+#define PCLK_TOP_ROOT 20
+#define ACLK_TOP 21
+#define HCLK_TOP 22
+#define CLK_AUDIO_FRAC_0 23
+#define CLK_AUDIO_FRAC_1 24
+#define CLK_AUDIO_FRAC_2 25
+#define CLK_AUDIO_FRAC_3 26
+#define CLK_UART_FRAC_0 27
+#define CLK_UART_FRAC_1 28
+#define CLK_UART_FRAC_2 29
+#define CLK_UART1_SRC_TOP 30
+#define CLK_AUDIO_INT_0 31
+#define CLK_AUDIO_INT_1 32
+#define CLK_AUDIO_INT_2 33
+#define CLK_PDM0_SRC_TOP 34
+#define CLK_PDM1_OUT 35
+#define CLK_GMAC0_125M_SRC 36
+#define CLK_GMAC1_125M_SRC 37
+#define LCLK_ASRC_SRC_0 38
+#define LCLK_ASRC_SRC_1 39
+#define REF_CLK0_OUT_PLL 40
+#define REF_CLK1_OUT_PLL 41
+#define REF_CLK2_OUT_PLL 42
+#define REFCLKO25M_GMAC0_OUT 43
+#define REFCLKO25M_GMAC1_OUT 44
+#define CLK_CIFOUT_OUT 45
+#define CLK_GMAC0_RMII_CRU 46
+#define CLK_GMAC1_RMII_CRU 47
+#define CLK_OTPC_AUTO_RD_G 48
+#define CLK_OTP_PHY_G 49
+#define CLK_MIPI_CAMERAOUT_M0 50
+#define CLK_MIPI_CAMERAOUT_M1 51
+#define CLK_MIPI_CAMERAOUT_M2 52
+#define MCLK_PDM0_SRC_TOP 53
+#define HCLK_AUDIO_ROOT 54
+#define HCLK_ASRC_2CH_0 55
+#define HCLK_ASRC_2CH_1 56
+#define HCLK_ASRC_4CH_0 57
+#define HCLK_ASRC_4CH_1 58
+#define CLK_ASRC_2CH_0 59
+#define CLK_ASRC_2CH_1 60
+#define CLK_ASRC_4CH_0 61
+#define CLK_ASRC_4CH_1 62
+#define MCLK_SAI0_8CH_SRC 63
+#define MCLK_SAI0_8CH 64
+#define HCLK_SAI0_8CH 65
+#define HCLK_SPDIF_RX0 66
+#define MCLK_SPDIF_RX0 67
+#define HCLK_SPDIF_RX1 68
+#define MCLK_SPDIF_RX1 69
+#define MCLK_SAI1_8CH_SRC 70
+#define MCLK_SAI1_8CH 71
+#define HCLK_SAI1_8CH 72
+#define MCLK_SAI2_2CH_SRC 73
+#define MCLK_SAI2_2CH 74
+#define HCLK_SAI2_2CH 75
+#define MCLK_SAI3_2CH_SRC 76
+#define MCLK_SAI3_2CH 77
+#define HCLK_SAI3_2CH 78
+#define MCLK_SAI4_2CH_SRC 79
+#define MCLK_SAI4_2CH 80
+#define HCLK_SAI4_2CH 81
+#define HCLK_ACDCDIG_DSM 82
+#define MCLK_ACDCDIG_DSM 83
+#define CLK_PDM1 84
+#define HCLK_PDM1 85
+#define MCLK_PDM1 86
+#define HCLK_SPDIF_TX0 87
+#define MCLK_SPDIF_TX0 88
+#define HCLK_SPDIF_TX1 89
+#define MCLK_SPDIF_TX1 90
+#define CLK_SAI1_MCLKOUT 91
+#define CLK_SAI2_MCLKOUT 92
+#define CLK_SAI3_MCLKOUT 93
+#define CLK_SAI4_MCLKOUT 94
+#define CLK_SAI0_MCLKOUT 95
+#define HCLK_BUS_ROOT 96
+#define PCLK_BUS_ROOT 97
+#define ACLK_BUS_ROOT 98
+#define HCLK_CAN0 99
+#define CLK_CAN0 100
+#define HCLK_CAN1 101
+#define CLK_CAN1 102
+#define CLK_KEY_SHIFT 103
+#define PCLK_I2C1 104
+#define PCLK_I2C2 105
+#define PCLK_I2C3 106
+#define PCLK_I2C4 107
+#define PCLK_I2C5 108
+#define PCLK_I2C6 109
+#define PCLK_I2C7 110
+#define PCLK_I2C8 111
+#define PCLK_I2C9 112
+#define PCLK_WDT_BUSMCU 113
+#define TCLK_WDT_BUSMCU 114
+#define ACLK_GIC 115
+#define CLK_I2C1 116
+#define CLK_I2C2 117
+#define CLK_I2C3 118
+#define CLK_I2C4 119
+#define CLK_I2C5 120
+#define CLK_I2C6 121
+#define CLK_I2C7 122
+#define CLK_I2C8 123
+#define CLK_I2C9 124
+#define PCLK_SARADC 125
+#define CLK_SARADC 126
+#define PCLK_TSADC 127
+#define CLK_TSADC 128
+#define PCLK_UART0 129
+#define PCLK_UART2 130
+#define PCLK_UART3 131
+#define PCLK_UART4 132
+#define PCLK_UART5 133
+#define PCLK_UART6 134
+#define PCLK_UART7 135
+#define PCLK_UART8 136
+#define PCLK_UART9 137
+#define PCLK_UART10 138
+#define PCLK_UART11 139
+#define SCLK_UART0 140
+#define SCLK_UART2 141
+#define SCLK_UART3 142
+#define SCLK_UART4 143
+#define SCLK_UART5 144
+#define SCLK_UART6 145
+#define SCLK_UART7 146
+#define SCLK_UART8 147
+#define SCLK_UART9 148
+#define SCLK_UART10 149
+#define SCLK_UART11 150
+#define PCLK_SPI0 151
+#define PCLK_SPI1 152
+#define PCLK_SPI2 153
+#define PCLK_SPI3 154
+#define PCLK_SPI4 155
+#define CLK_SPI0 156
+#define CLK_SPI1 157
+#define CLK_SPI2 158
+#define CLK_SPI3 159
+#define CLK_SPI4 160
+#define PCLK_WDT0 161
+#define TCLK_WDT0 162
+#define PCLK_PWM1 163
+#define CLK_PWM1 164
+#define CLK_OSC_PWM1 165
+#define CLK_RC_PWM1 166
+#define PCLK_BUSTIMER0 167
+#define PCLK_BUSTIMER1 168
+#define CLK_TIMER0_ROOT 169
+#define CLK_TIMER0 170
+#define CLK_TIMER1 171
+#define CLK_TIMER2 172
+#define CLK_TIMER3 173
+#define CLK_TIMER4 174
+#define CLK_TIMER5 175
+#define PCLK_MAILBOX0 176
+#define PCLK_GPIO1 177
+#define DBCLK_GPIO1 178
+#define PCLK_GPIO2 179
+#define DBCLK_GPIO2 180
+#define PCLK_GPIO3 181
+#define DBCLK_GPIO3 182
+#define PCLK_GPIO4 183
+#define DBCLK_GPIO4 184
+#define ACLK_DECOM 185
+#define PCLK_DECOM 186
+#define DCLK_DECOM 187
+#define CLK_TIMER1_ROOT 188
+#define CLK_TIMER6 189
+#define CLK_TIMER7 190
+#define CLK_TIMER8 191
+#define CLK_TIMER9 192
+#define CLK_TIMER10 193
+#define CLK_TIMER11 194
+#define ACLK_DMAC0 195
+#define ACLK_DMAC1 196
+#define ACLK_DMAC2 197
+#define ACLK_SPINLOCK 198
+#define HCLK_I3C0 199
+#define HCLK_I3C1 200
+#define HCLK_BUS_CM0_ROOT 201
+#define FCLK_BUS_CM0_CORE 202
+#define CLK_BUS_CM0_RTC 203
+#define PCLK_PMU2 204
+#define PCLK_PWM2 205
+#define CLK_PWM2 206
+#define CLK_RC_PWM2 207
+#define CLK_OSC_PWM2 208
+#define CLK_FREQ_PWM1 209
+#define CLK_COUNTER_PWM1 210
+#define SAI_SCLKIN_FREQ 211
+#define SAI_SCLKIN_COUNTER 212
+#define CLK_I3C0 213
+#define CLK_I3C1 214
+#define PCLK_CSIDPHY1 215
+#define PCLK_DDR_ROOT 216
+#define PCLK_DDR_MON_CH0 217
+#define TMCLK_DDR_MON_CH0 218
+#define ACLK_DDR_ROOT 219
+#define HCLK_DDR_ROOT 220
+#define FCLK_DDR_CM0_CORE 221
+#define CLK_DDR_TIMER_ROOT 222
+#define CLK_DDR_TIMER0 223
+#define CLK_DDR_TIMER1 224
+#define TCLK_WDT_DDR 225
+#define PCLK_WDT 226
+#define PCLK_TIMER 227
+#define CLK_DDR_CM0_RTC 228
+#define ACLK_RKNN0 229
+#define ACLK_RKNN1 230
+#define HCLK_RKNN_ROOT 231
+#define CLK_RKNN_DSU0 232
+#define PCLK_NPUTOP_ROOT 233
+#define PCLK_NPU_TIMER 234
+#define CLK_NPUTIMER_ROOT 235
+#define CLK_NPUTIMER0 236
+#define CLK_NPUTIMER1 237
+#define PCLK_NPU_WDT 238
+#define TCLK_NPU_WDT 239
+#define ACLK_RKNN_CBUF 240
+#define HCLK_NPU_CM0_ROOT 241
+#define FCLK_NPU_CM0_CORE 242
+#define CLK_NPU_CM0_RTC 243
+#define HCLK_RKNN_CBUF 244
+#define HCLK_NVM_ROOT 245
+#define ACLK_NVM_ROOT 246
+#define SCLK_FSPI_X2 247
+#define HCLK_FSPI 248
+#define CCLK_SRC_EMMC 249
+#define HCLK_EMMC 250
+#define ACLK_EMMC 251
+#define BCLK_EMMC 252
+#define TCLK_EMMC 253
+#define PCLK_PHP_ROOT 254
+#define ACLK_PHP_ROOT 255
+#define PCLK_PCIE0 256
+#define CLK_PCIE0_AUX 257
+#define ACLK_PCIE0_MST 258
+#define ACLK_PCIE0_SLV 259
+#define ACLK_PCIE0_DBI 260
+#define ACLK_USB3OTG1 261
+#define CLK_REF_USB3OTG1 262
+#define CLK_SUSPEND_USB3OTG1 263
+#define ACLK_MMU0 264
+#define ACLK_SLV_MMU0 265
+#define ACLK_MMU1 266
+#define ACLK_SLV_MMU1 267
+#define PCLK_PCIE1 268
+#define CLK_PCIE1_AUX 269
+#define ACLK_PCIE1_MST 270
+#define ACLK_PCIE1_SLV 271
+#define ACLK_PCIE1_DBI 272
+#define CLK_RXOOB0 273
+#define CLK_RXOOB1 274
+#define CLK_PMALIVE0 275
+#define CLK_PMALIVE1 276
+#define ACLK_SATA0 277
+#define ACLK_SATA1 278
+#define CLK_USB3OTG1_PIPE_PCLK 279
+#define CLK_USB3OTG1_UTMI 280
+#define CLK_USB3OTG0_PIPE_PCLK 281
+#define CLK_USB3OTG0_UTMI 282
+#define HCLK_SDGMAC_ROOT 283
+#define ACLK_SDGMAC_ROOT 284
+#define PCLK_SDGMAC_ROOT 285
+#define ACLK_GMAC0 286
+#define ACLK_GMAC1 287
+#define PCLK_GMAC0 288
+#define PCLK_GMAC1 289
+#define CCLK_SRC_SDIO 290
+#define HCLK_SDIO 291
+#define CLK_GMAC1_PTP_REF 292
+#define CLK_GMAC0_PTP_REF 293
+#define CLK_GMAC1_PTP_REF_SRC 294
+#define CLK_GMAC0_PTP_REF_SRC 295
+#define CCLK_SRC_SDMMC0 296
+#define HCLK_SDMMC0 297
+#define SCLK_FSPI1_X2 298
+#define HCLK_FSPI1 299
+#define ACLK_DSMC_ROOT 300
+#define ACLK_DSMC 301
+#define PCLK_DSMC 302
+#define CLK_DSMC_SYS 303
+#define HCLK_HSGPIO 304
+#define CLK_HSGPIO_TX 305
+#define CLK_HSGPIO_RX 306
+#define ACLK_HSGPIO 307
+#define PCLK_PHPPHY_ROOT 308
+#define PCLK_PCIE2_COMBOPHY0 309
+#define PCLK_PCIE2_COMBOPHY1 310
+#define CLK_PCIE_100M_SRC 311
+#define CLK_PCIE_100M_NDUTY_SRC 312
+#define CLK_REF_PCIE0_PHY 313
+#define CLK_REF_PCIE1_PHY 314
+#define CLK_REF_MPHY_26M 315
+#define HCLK_RKVDEC_ROOT 316
+#define ACLK_RKVDEC_ROOT 317
+#define HCLK_RKVDEC 318
+#define CLK_RKVDEC_HEVC_CA 319
+#define CLK_RKVDEC_CORE 320
+#define ACLK_UFS_ROOT 321
+#define ACLK_USB_ROOT 322
+#define PCLK_USB_ROOT 323
+#define ACLK_USB3OTG0 324
+#define CLK_REF_USB3OTG0 325
+#define CLK_SUSPEND_USB3OTG0 326
+#define ACLK_MMU2 327
+#define ACLK_SLV_MMU2 328
+#define ACLK_UFS_SYS 329
+#define ACLK_VPU_ROOT 330
+#define ACLK_VPU_MID_ROOT 331
+#define HCLK_VPU_ROOT 332
+#define ACLK_JPEG_ROOT 333
+#define ACLK_VPU_LOW_ROOT 334
+#define HCLK_RGA2E_0 335
+#define ACLK_RGA2E_0 336
+#define CLK_CORE_RGA2E_0 337
+#define ACLK_JPEG 338
+#define HCLK_JPEG 339
+#define HCLK_VDPP 340
+#define ACLK_VDPP 341
+#define CLK_CORE_VDPP 342
+#define HCLK_RGA2E_1 343
+#define ACLK_RGA2E_1 344
+#define CLK_CORE_RGA2E_1 345
+#define DCLK_EBC_FRAC_SRC 346
+#define HCLK_EBC 347
+#define ACLK_EBC 348
+#define DCLK_EBC 349
+#define HCLK_VEPU0_ROOT 350
+#define ACLK_VEPU0_ROOT 351
+#define HCLK_VEPU0 352
+#define ACLK_VEPU0 353
+#define CLK_VEPU0_CORE 354
+#define ACLK_VI_ROOT 355
+#define HCLK_VI_ROOT 356
+#define PCLK_VI_ROOT 357
+#define DCLK_VICAP 358
+#define ACLK_VICAP 359
+#define HCLK_VICAP 360
+#define CLK_ISP_CORE 361
+#define CLK_ISP_CORE_MARVIN 362
+#define CLK_ISP_CORE_VICAP 363
+#define ACLK_ISP 364
+#define HCLK_ISP 365
+#define ACLK_VPSS 366
+#define HCLK_VPSS 367
+#define CLK_CORE_VPSS 368
+#define PCLK_CSI_HOST_0 369
+#define PCLK_CSI_HOST_1 370
+#define PCLK_CSI_HOST_2 371
+#define PCLK_CSI_HOST_3 372
+#define PCLK_CSI_HOST_4 373
+#define ICLK_CSIHOST01 374
+#define ICLK_CSIHOST0 375
+#define CLK_ISP_PVTPLL_SRC 376
+#define ACLK_VI_ROOT_INTER 377
+#define CLK_VICAP_I0CLK 378
+#define CLK_VICAP_I1CLK 379
+#define CLK_VICAP_I2CLK 380
+#define CLK_VICAP_I3CLK 381
+#define CLK_VICAP_I4CLK 382
+#define ACLK_VOP_ROOT 383
+#define HCLK_VOP_ROOT 384
+#define PCLK_VOP_ROOT 385
+#define HCLK_VOP 386
+#define ACLK_VOP 387
+#define DCLK_VP0_SRC 388
+#define DCLK_VP1_SRC 389
+#define DCLK_VP2_SRC 390
+#define DCLK_VP0 391
+#define DCLK_VP1 392
+#define DCLK_VP2 393
+#define PCLK_VOPGRF 394
+#define ACLK_VO0_ROOT 395
+#define HCLK_VO0_ROOT 396
+#define PCLK_VO0_ROOT 397
+#define PCLK_VO0_GRF 398
+#define ACLK_HDCP0 399
+#define HCLK_HDCP0 400
+#define PCLK_HDCP0 401
+#define CLK_TRNG0_SKP 402
+#define PCLK_DSIHOST0 403
+#define CLK_DSIHOST0 404
+#define PCLK_HDMITX0 405
+#define CLK_HDMITX0_EARC 406
+#define CLK_HDMITX0_REF 407
+#define PCLK_EDP0 408
+#define CLK_EDP0_24M 409
+#define CLK_EDP0_200M 410
+#define MCLK_SAI5_8CH_SRC 411
+#define MCLK_SAI5_8CH 412
+#define HCLK_SAI5_8CH 413
+#define MCLK_SAI6_8CH_SRC 414
+#define MCLK_SAI6_8CH 415
+#define HCLK_SAI6_8CH 416
+#define HCLK_SPDIF_TX2 417
+#define MCLK_SPDIF_TX2 418
+#define HCLK_SPDIF_RX2 419
+#define MCLK_SPDIF_RX2 420
+#define HCLK_SAI8_8CH 421
+#define MCLK_SAI8_8CH_SRC 422
+#define MCLK_SAI8_8CH 423
+#define ACLK_VO1_ROOT 424
+#define HCLK_VO1_ROOT 425
+#define PCLK_VO1_ROOT 426
+#define MCLK_SAI7_8CH_SRC 427
+#define MCLK_SAI7_8CH 428
+#define HCLK_SAI7_8CH 429
+#define HCLK_SPDIF_TX3 430
+#define HCLK_SPDIF_TX4 431
+#define HCLK_SPDIF_TX5 432
+#define MCLK_SPDIF_TX3 433
+#define CLK_AUX16MHZ_0 434
+#define ACLK_DP0 435
+#define PCLK_DP0 436
+#define PCLK_VO1_GRF 437
+#define ACLK_HDCP1 438
+#define HCLK_HDCP1 439
+#define PCLK_HDCP1 440
+#define CLK_TRNG1_SKP 441
+#define HCLK_SAI9_8CH 442
+#define MCLK_SAI9_8CH_SRC 443
+#define MCLK_SAI9_8CH 444
+#define MCLK_SPDIF_TX4 445
+#define MCLK_SPDIF_TX5 446
+#define CLK_GPU_SRC_PRE 447
+#define CLK_GPU 448
+#define PCLK_GPU_ROOT 449
+#define ACLK_CENTER_ROOT 450
+#define ACLK_CENTER_LOW_ROOT 451
+#define HCLK_CENTER_ROOT 452
+#define PCLK_CENTER_ROOT 453
+#define ACLK_DMA2DDR 454
+#define ACLK_DDR_SHAREMEM 455
+#define PCLK_DMA2DDR 456
+#define PCLK_SHAREMEM 457
+#define HCLK_VEPU1_ROOT 458
+#define ACLK_VEPU1_ROOT 459
+#define HCLK_VEPU1 460
+#define ACLK_VEPU1 461
+#define CLK_VEPU1_CORE 462
+#define CLK_JDBCK_DAP 463
+#define PCLK_MIPI_DCPHY 464
+#define CLK_32K_USB2DEBUG 465
+#define PCLK_CSIDPHY 466
+#define PCLK_USBDPPHY 467
+#define CLK_PMUPHY_REF_SRC 468
+#define CLK_USBDP_COMBO_PHY_IMMORTAL 469
+#define CLK_HDMITXHDP 470
+#define PCLK_MPHY 471
+#define CLK_REF_OSC_MPHY 472
+#define CLK_REF_UFS_CLKOUT 473
+#define HCLK_PMU1_ROOT 474
+#define HCLK_PMU_CM0_ROOT 475
+#define CLK_200M_PMU_SRC 476
+#define CLK_100M_PMU_SRC 477
+#define CLK_50M_PMU_SRC 478
+#define FCLK_PMU_CM0_CORE 479
+#define CLK_PMU_CM0_RTC 480
+#define PCLK_PMU1 481
+#define CLK_PMU1 482
+#define PCLK_PMU1WDT 483
+#define TCLK_PMU1WDT 484
+#define PCLK_PMUTIMER 485
+#define CLK_PMUTIMER_ROOT 486
+#define CLK_PMUTIMER0 487
+#define CLK_PMUTIMER1 488
+#define PCLK_PMU1PWM 489
+#define CLK_PMU1PWM 490
+#define CLK_PMU1PWM_OSC 491
+#define PCLK_PMUPHY_ROOT 492
+#define PCLK_I2C0 493
+#define CLK_I2C0 494
+#define SCLK_UART1 495
+#define PCLK_UART1 496
+#define CLK_PMU1PWM_RC 497
+#define CLK_PDM0 498
+#define HCLK_PDM0 499
+#define MCLK_PDM0 500
+#define HCLK_VAD 501
+#define CLK_OSCCHK_PVTM 502
+#define CLK_PDM0_OUT 503
+#define CLK_HPTIMER_SRC 504
+#define PCLK_PMU0_ROOT 505
+#define PCLK_PMU0 506
+#define PCLK_GPIO0 507
+#define DBCLK_GPIO0 508
+#define CLK_OSC0_PMU1 509
+#define PCLK_PMU1_ROOT 510
+#define XIN_OSC0_DIV 511
+#define ACLK_USB 512
+#define ACLK_UFS 513
+#define ACLK_SDGMAC 514
+#define HCLK_SDGMAC 515
+#define PCLK_SDGMAC 516
+#define HCLK_VO1 517
+#define HCLK_VO0 518
+#define PCLK_CCI_ROOT 519
+#define ACLK_CCI_ROOT 520
+#define HCLK_VO0VOP_CHANNEL 521
+#define ACLK_VO0VOP_CHANNEL 522
+#define ACLK_TOP_MID 523
+#define ACLK_SECURE_HIGH 524
+#define CLK_USBPHY_REF_SRC 525
+#define CLK_PHY_REF_SRC 526
+#define CLK_CPLL_REF_SRC 527
+#define CLK_AUPLL_REF_SRC 528
+#define PCLK_SECURE_NS 529
+#define HCLK_SECURE_NS 530
+#define ACLK_SECURE_NS 531
+#define PCLK_OTPC_NS 532
+#define HCLK_CRYPTO_NS 533
+#define HCLK_TRNG_NS 534
+#define CLK_OTPC_NS 535
+#define SCLK_DSU 536
+#define SCLK_DDR 537
+#define ACLK_CRYPTO_NS 538
+#define CLK_PKA_CRYPTO_NS 539
+#define ACLK_RKVDEC_ROOT_BAK 540
+#define CLK_AUDIO_FRAC_0_SRC 541
+#define CLK_AUDIO_FRAC_1_SRC 542
+#define CLK_AUDIO_FRAC_2_SRC 543
+#define CLK_AUDIO_FRAC_3_SRC 544
+#define PCLK_HDPTX_APB 545
+
+/* secure clk */
+#define CLK_STIMER0_ROOT 546
+#define CLK_STIMER1_ROOT 547
+#define PCLK_SECURE_S 548
+#define HCLK_SECURE_S 549
+#define ACLK_SECURE_S 550
+#define CLK_PKA_CRYPTO_S 551
+#define HCLK_VO1_S 552
+#define PCLK_VO1_S 553
+#define HCLK_VO0_S 554
+#define PCLK_VO0_S 555
+#define PCLK_KLAD 556
+#define HCLK_CRYPTO_S 557
+#define HCLK_KLAD 558
+#define ACLK_CRYPTO_S 559
+#define HCLK_TRNG_S 560
+#define PCLK_OTPC_S 561
+#define CLK_OTPC_S 562
+#define PCLK_WDT_S 563
+#define TCLK_WDT_S 564
+#define PCLK_HDCP0_TRNG 565
+#define PCLK_HDCP1_TRNG 566
+#define HCLK_HDCP_KEY0 567
+#define HCLK_HDCP_KEY1 568
+#define PCLK_EDP_S 569
+#define ACLK_KLAD 570
+
+#endif
#define CLK_GOUT_CORE_CCI_PCLK 4
#define CLK_GOUT_CORE_CMU_CORE_PCLK 5
+/* CMU_DPUM */
+#define CLK_MOUT_DPUM_BUS_USER 1
+#define CLK_DOUT_DPUM_BUSP 2
+#define CLK_GOUT_DPUM_ACLK_DECON 3
+#define CLK_GOUT_DPUM_ACLK_DMA 4
+#define CLK_GOUT_DPUM_ACLK_DPP 5
+#define CLK_GOUT_DPUM_SYSMMU_D0_CLK 6
+#define CLK_GOUT_DPUM_SYSMMU_D1_CLK 7
+#define CLK_GOUT_DPUM_SYSMMU_D2_CLK 8
+#define CLK_GOUT_DPUM_SYSMMU_D3_CLK 9
+
/* CMU_FSYS0 */
#define CLK_MOUT_FSYS0_BUS_USER 1
#define CLK_MOUT_FSYS0_PCIE_USER 2
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024 Samsung Electronics Co., Ltd.
+ * Author: Sunyeal Hong <sunyeal.hong@samsung.com>
+ *
+ * Device Tree binding constants for ExynosAuto v920 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H
+#define _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H
+
+/* CMU_TOP */
+#define FOUT_SHARED0_PLL 1
+#define FOUT_SHARED1_PLL 2
+#define FOUT_SHARED2_PLL 3
+#define FOUT_SHARED3_PLL 4
+#define FOUT_SHARED4_PLL 5
+#define FOUT_SHARED5_PLL 6
+#define FOUT_MMC_PLL 7
+
+/* MUX in CMU_TOP */
+#define MOUT_SHARED0_PLL 8
+#define MOUT_SHARED1_PLL 9
+#define MOUT_SHARED2_PLL 10
+#define MOUT_SHARED3_PLL 11
+#define MOUT_SHARED4_PLL 12
+#define MOUT_SHARED5_PLL 13
+#define MOUT_MMC_PLL 14
+#define MOUT_CLKCMU_CMU_BOOST 15
+#define MOUT_CLKCMU_CMU_CMUREF 16
+#define MOUT_CLKCMU_ACC_NOC 17
+#define MOUT_CLKCMU_ACC_ORB 18
+#define MOUT_CLKCMU_APM_NOC 19
+#define MOUT_CLKCMU_AUD_CPU 20
+#define MOUT_CLKCMU_AUD_NOC 21
+#define MOUT_CLKCMU_CPUCL0_SWITCH 22
+#define MOUT_CLKCMU_CPUCL0_CLUSTER 23
+#define MOUT_CLKCMU_CPUCL0_DBG 24
+#define MOUT_CLKCMU_CPUCL1_SWITCH 25
+#define MOUT_CLKCMU_CPUCL1_CLUSTER 26
+#define MOUT_CLKCMU_CPUCL2_SWITCH 27
+#define MOUT_CLKCMU_CPUCL2_CLUSTER 28
+#define MOUT_CLKCMU_DNC_NOC 29
+#define MOUT_CLKCMU_DPTX_NOC 30
+#define MOUT_CLKCMU_DPTX_DPGTC 31
+#define MOUT_CLKCMU_DPTX_DPOSC 32
+#define MOUT_CLKCMU_DPUB_NOC 33
+#define MOUT_CLKCMU_DPUB_DSIM 34
+#define MOUT_CLKCMU_DPUF0_NOC 35
+#define MOUT_CLKCMU_DPUF1_NOC 36
+#define MOUT_CLKCMU_DPUF2_NOC 37
+#define MOUT_CLKCMU_DSP_NOC 38
+#define MOUT_CLKCMU_G3D_SWITCH 39
+#define MOUT_CLKCMU_G3D_NOCP 40
+#define MOUT_CLKCMU_GNPU_NOC 41
+#define MOUT_CLKCMU_HSI0_NOC 42
+#define MOUT_CLKCMU_HSI1_NOC 43
+#define MOUT_CLKCMU_HSI1_USBDRD 44
+#define MOUT_CLKCMU_HSI1_MMC_CARD 45
+#define MOUT_CLKCMU_HSI2_NOC 46
+#define MOUT_CLKCMU_HSI2_NOC_UFS 47
+#define MOUT_CLKCMU_HSI2_UFS_EMBD 48
+#define MOUT_CLKCMU_HSI2_ETHERNET 49
+#define MOUT_CLKCMU_ISP_NOC 50
+#define MOUT_CLKCMU_M2M_NOC 51
+#define MOUT_CLKCMU_M2M_JPEG 52
+#define MOUT_CLKCMU_MFC_MFC 53
+#define MOUT_CLKCMU_MFC_WFD 54
+#define MOUT_CLKCMU_MFD_NOC 55
+#define MOUT_CLKCMU_MIF_SWITCH 56
+#define MOUT_CLKCMU_MIF_NOCP 57
+#define MOUT_CLKCMU_MISC_NOC 58
+#define MOUT_CLKCMU_NOCL0_NOC 59
+#define MOUT_CLKCMU_NOCL1_NOC 60
+#define MOUT_CLKCMU_NOCL2_NOC 61
+#define MOUT_CLKCMU_PERIC0_NOC 62
+#define MOUT_CLKCMU_PERIC0_IP 63
+#define MOUT_CLKCMU_PERIC1_NOC 64
+#define MOUT_CLKCMU_PERIC1_IP 65
+#define MOUT_CLKCMU_SDMA_NOC 66
+#define MOUT_CLKCMU_SNW_NOC 67
+#define MOUT_CLKCMU_SSP_NOC 68
+#define MOUT_CLKCMU_TAA_NOC 69
+
+/* DIV in CMU_TOP */
+#define DOUT_SHARED0_DIV1 70
+#define DOUT_SHARED0_DIV2 71
+#define DOUT_SHARED0_DIV3 72
+#define DOUT_SHARED0_DIV4 73
+#define DOUT_SHARED1_DIV1 74
+#define DOUT_SHARED1_DIV2 75
+#define DOUT_SHARED1_DIV3 76
+#define DOUT_SHARED1_DIV4 77
+#define DOUT_SHARED2_DIV1 78
+#define DOUT_SHARED2_DIV2 79
+#define DOUT_SHARED2_DIV3 80
+#define DOUT_SHARED2_DIV4 81
+#define DOUT_SHARED3_DIV1 82
+#define DOUT_SHARED3_DIV2 83
+#define DOUT_SHARED3_DIV3 84
+#define DOUT_SHARED3_DIV4 85
+#define DOUT_SHARED4_DIV1 86
+#define DOUT_SHARED4_DIV2 87
+#define DOUT_SHARED4_DIV3 88
+#define DOUT_SHARED4_DIV4 89
+#define DOUT_SHARED5_DIV1 90
+#define DOUT_SHARED5_DIV2 91
+#define DOUT_SHARED5_DIV3 92
+#define DOUT_SHARED5_DIV4 93
+#define DOUT_CLKCMU_CMU_BOOST 94
+#define DOUT_CLKCMU_ACC_NOC 95
+#define DOUT_CLKCMU_ACC_ORB 96
+#define DOUT_CLKCMU_APM_NOC 97
+#define DOUT_CLKCMU_AUD_CPU 98
+#define DOUT_CLKCMU_AUD_NOC 99
+#define DOUT_CLKCMU_CPUCL0_SWITCH 100
+#define DOUT_CLKCMU_CPUCL0_CLUSTER 101
+#define DOUT_CLKCMU_CPUCL0_DBG 102
+#define DOUT_CLKCMU_CPUCL1_SWITCH 103
+#define DOUT_CLKCMU_CPUCL1_CLUSTER 104
+#define DOUT_CLKCMU_CPUCL2_SWITCH 105
+#define DOUT_CLKCMU_CPUCL2_CLUSTER 106
+#define DOUT_CLKCMU_DNC_NOC 107
+#define DOUT_CLKCMU_DPTX_NOC 108
+#define DOUT_CLKCMU_DPTX_DPGTC 109
+#define DOUT_CLKCMU_DPTX_DPOSC 110
+#define DOUT_CLKCMU_DPUB_NOC 111
+#define DOUT_CLKCMU_DPUB_DSIM 112
+#define DOUT_CLKCMU_DPUF0_NOC 113
+#define DOUT_CLKCMU_DPUF1_NOC 114
+#define DOUT_CLKCMU_DPUF2_NOC 115
+#define DOUT_CLKCMU_DSP_NOC 116
+#define DOUT_CLKCMU_G3D_SWITCH 117
+#define DOUT_CLKCMU_G3D_NOCP 118
+#define DOUT_CLKCMU_GNPU_NOC 119
+#define DOUT_CLKCMU_HSI0_NOC 120
+#define DOUT_CLKCMU_HSI1_NOC 121
+#define DOUT_CLKCMU_HSI1_USBDRD 122
+#define DOUT_CLKCMU_HSI1_MMC_CARD 123
+#define DOUT_CLKCMU_HSI2_NOC 124
+#define DOUT_CLKCMU_HSI2_NOC_UFS 125
+#define DOUT_CLKCMU_HSI2_UFS_EMBD 126
+#define DOUT_CLKCMU_HSI2_ETHERNET 127
+#define DOUT_CLKCMU_ISP_NOC 128
+#define DOUT_CLKCMU_M2M_NOC 129
+#define DOUT_CLKCMU_M2M_JPEG 130
+#define DOUT_CLKCMU_MFC_MFC 131
+#define DOUT_CLKCMU_MFC_WFD 132
+#define DOUT_CLKCMU_MFD_NOC 133
+#define DOUT_CLKCMU_MIF_NOCP 134
+#define DOUT_CLKCMU_MISC_NOC 135
+#define DOUT_CLKCMU_NOCL0_NOC 136
+#define DOUT_CLKCMU_NOCL1_NOC 137
+#define DOUT_CLKCMU_NOCL2_NOC 138
+#define DOUT_CLKCMU_PERIC0_NOC 139
+#define DOUT_CLKCMU_PERIC0_IP 140
+#define DOUT_CLKCMU_PERIC1_NOC 141
+#define DOUT_CLKCMU_PERIC1_IP 142
+#define DOUT_CLKCMU_SDMA_NOC 143
+#define DOUT_CLKCMU_SNW_NOC 144
+#define DOUT_CLKCMU_SSP_NOC 145
+#define DOUT_CLKCMU_TAA_NOC 146
+
+/* CMU_PERIC0 */
+#define CLK_MOUT_PERIC0_IP_USER 1
+#define CLK_MOUT_PERIC0_NOC_USER 2
+#define CLK_MOUT_PERIC0_USI00_USI 3
+#define CLK_MOUT_PERIC0_USI01_USI 4
+#define CLK_MOUT_PERIC0_USI02_USI 5
+#define CLK_MOUT_PERIC0_USI03_USI 6
+#define CLK_MOUT_PERIC0_USI04_USI 7
+#define CLK_MOUT_PERIC0_USI05_USI 8
+#define CLK_MOUT_PERIC0_USI06_USI 9
+#define CLK_MOUT_PERIC0_USI07_USI 10
+#define CLK_MOUT_PERIC0_USI08_USI 11
+#define CLK_MOUT_PERIC0_USI_I2C 12
+#define CLK_MOUT_PERIC0_I3C 13
+
+#define CLK_DOUT_PERIC0_USI00_USI 14
+#define CLK_DOUT_PERIC0_USI01_USI 15
+#define CLK_DOUT_PERIC0_USI02_USI 16
+#define CLK_DOUT_PERIC0_USI03_USI 17
+#define CLK_DOUT_PERIC0_USI04_USI 18
+#define CLK_DOUT_PERIC0_USI05_USI 19
+#define CLK_DOUT_PERIC0_USI06_USI 20
+#define CLK_DOUT_PERIC0_USI07_USI 21
+#define CLK_DOUT_PERIC0_USI08_USI 22
+#define CLK_DOUT_PERIC0_USI_I2C 23
+#define CLK_DOUT_PERIC0_I3C 24
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_ADI_AD4695_H
+#define _DT_BINDINGS_ADI_AD4695_H
+
+#define AD4695_COMMON_MODE_REFGND 0xFF
+#define AD4695_COMMON_MODE_COM 0xFE
+
+#endif /* _DT_BINDINGS_ADI_AD4695_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+#ifndef INTERCONNECT_QCOM_IPQ5332_H
+#define INTERCONNECT_QCOM_IPQ5332_H
+
+#define MASTER_SNOC_PCIE3_1_M 0
+#define SLAVE_SNOC_PCIE3_1_M 1
+#define MASTER_ANOC_PCIE3_1_S 2
+#define SLAVE_ANOC_PCIE3_1_S 3
+#define MASTER_SNOC_PCIE3_2_M 4
+#define SLAVE_SNOC_PCIE3_2_M 5
+#define MASTER_ANOC_PCIE3_2_S 6
+#define SLAVE_ANOC_PCIE3_2_S 7
+#define MASTER_SNOC_USB 8
+#define SLAVE_SNOC_USB 9
+#define MASTER_NSSNOC_NSSCC 10
+#define SLAVE_NSSNOC_NSSCC 11
+#define MASTER_NSSNOC_SNOC_0 12
+#define SLAVE_NSSNOC_SNOC_0 13
+#define MASTER_NSSNOC_SNOC_1 14
+#define SLAVE_NSSNOC_SNOC_1 15
+#define MASTER_NSSNOC_ATB 16
+#define SLAVE_NSSNOC_ATB 17
+#define MASTER_NSSNOC_PCNOC_1 18
+#define SLAVE_NSSNOC_PCNOC_1 19
+#define MASTER_NSSNOC_QOSGEN_REF 20
+#define SLAVE_NSSNOC_QOSGEN_REF 21
+#define MASTER_NSSNOC_TIMEOUT_REF 22
+#define SLAVE_NSSNOC_TIMEOUT_REF 23
+#define MASTER_NSSNOC_XO_DCD 24
+#define SLAVE_NSSNOC_XO_DCD 25
+
+#define MASTER_NSSNOC_PPE 0
+#define SLAVE_NSSNOC_PPE 1
+#define MASTER_NSSNOC_PPE_CFG 2
+#define SLAVE_NSSNOC_PPE_CFG 3
+#define MASTER_NSSNOC_NSS_CSR 4
+#define SLAVE_NSSNOC_NSS_CSR 5
+#define MASTER_NSSNOC_CE_APB 6
+#define SLAVE_NSSNOC_CE_APB 7
+#define MASTER_NSSNOC_CE_AXI 8
+#define SLAVE_NSSNOC_CE_AXI 9
+
+#define MASTER_CNOC_AHB 0
+#define SLAVE_CNOC_AHB 1
+
+#endif /* INTERCONNECT_QCOM_IPQ5332_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Qualcomm MSM8937 interconnect IDs
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8937_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8937_H
+
+/* BIMC fabric */
+#define MAS_APPS_PROC 0
+#define MAS_OXILI 1
+#define MAS_SNOC_BIMC_0 2
+#define MAS_SNOC_BIMC_2 3
+#define MAS_SNOC_BIMC_1 4
+#define MAS_TCU_0 5
+#define SLV_EBI 6
+#define SLV_BIMC_SNOC 7
+
+/* PCNOC fabric */
+#define MAS_SPDM 0
+#define MAS_BLSP_1 1
+#define MAS_BLSP_2 2
+#define MAS_USB_HS1 3
+#define MAS_XI_USB_HS1 4
+#define MAS_CRYPTO 5
+#define MAS_SDCC_1 6
+#define MAS_SDCC_2 7
+#define MAS_SNOC_PCNOC 8
+#define PCNOC_M_0 9
+#define PCNOC_M_1 10
+#define PCNOC_INT_0 11
+#define PCNOC_INT_1 12
+#define PCNOC_INT_2 13
+#define PCNOC_INT_3 14
+#define PCNOC_S_0 15
+#define PCNOC_S_1 16
+#define PCNOC_S_2 17
+#define PCNOC_S_3 18
+#define PCNOC_S_4 19
+#define PCNOC_S_6 20
+#define PCNOC_S_7 21
+#define PCNOC_S_8 22
+#define SLV_SDCC_2 23
+#define SLV_SPDM 24
+#define SLV_PDM 25
+#define SLV_PRNG 26
+#define SLV_TCSR 27
+#define SLV_SNOC_CFG 28
+#define SLV_MESSAGE_RAM 29
+#define SLV_CAMERA_SS_CFG 30
+#define SLV_DISP_SS_CFG 31
+#define SLV_VENUS_CFG 32
+#define SLV_GPU_CFG 33
+#define SLV_TLMM 34
+#define SLV_BLSP_1 35
+#define SLV_BLSP_2 36
+#define SLV_PMIC_ARB 37
+#define SLV_SDCC_1 38
+#define SLV_CRYPTO_0_CFG 39
+#define SLV_USB_HS 40
+#define SLV_TCU 41
+#define SLV_PCNOC_SNOC 42
+
+/* SNOC fabric */
+#define MAS_QDSS_BAM 0
+#define MAS_BIMC_SNOC 1
+#define MAS_PCNOC_SNOC 2
+#define MAS_QDSS_ETR 3
+#define QDSS_INT 4
+#define SNOC_INT_0 5
+#define SNOC_INT_1 6
+#define SNOC_INT_2 7
+#define SLV_KPSS_AHB 8
+#define SLV_WCSS 9
+#define SLV_SNOC_BIMC_1 10
+#define SLV_IMEM 11
+#define SLV_SNOC_PCNOC 12
+#define SLV_QDSS_STM 13
+#define SLV_CATS_1 14
+#define SLV_LPASS 15
+
+/* SNOC-MM fabric */
+#define MAS_JPEG 0
+#define MAS_MDP 1
+#define MAS_VENUS 2
+#define MAS_VFE0 3
+#define MAS_VFE1 4
+#define MAS_CPP 5
+#define SLV_SNOC_BIMC_0 6
+#define SLV_SNOC_BIMC_2 7
+#define SLV_CATS_0 8
+
+#endif /* __DT_BINDINGS_INTERCONNECT_QCOM_MSM8937_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Qualcomm MSM8976 interconnect IDs
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8976_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8976_H
+
+/* BIMC fabric */
+#define MAS_APPS_PROC 0
+#define MAS_SMMNOC_BIMC 1
+#define MAS_SNOC_BIMC 2
+#define MAS_TCU_0 3
+#define SLV_EBI 4
+#define SLV_BIMC_SNOC 5
+
+/* PCNOC fabric */
+#define MAS_USB_HS2 0
+#define MAS_BLSP_1 1
+#define MAS_USB_HS1 2
+#define MAS_BLSP_2 3
+#define MAS_CRYPTO 4
+#define MAS_SDCC_1 5
+#define MAS_SDCC_2 6
+#define MAS_SDCC_3 7
+#define MAS_SNOC_PCNOC 8
+#define MAS_LPASS_AHB 9
+#define MAS_SPDM 10
+#define MAS_DEHR 11
+#define MAS_XM_USB_HS1 12
+#define PCNOC_M_0 13
+#define PCNOC_M_1 14
+#define PCNOC_INT_0 15
+#define PCNOC_INT_1 16
+#define PCNOC_INT_2 17
+#define PCNOC_S_1 18
+#define PCNOC_S_2 19
+#define PCNOC_S_3 20
+#define PCNOC_S_4 21
+#define PCNOC_S_8 22
+#define PCNOC_S_9 23
+#define SLV_TCSR 24
+#define SLV_TLMM 25
+#define SLV_CRYPTO_0_CFG 26
+#define SLV_MESSAGE_RAM 27
+#define SLV_PDM 28
+#define SLV_PRNG 29
+#define SLV_PMIC_ARB 30
+#define SLV_SNOC_CFG 31
+#define SLV_DCC_CFG 32
+#define SLV_CAMERA_SS_CFG 33
+#define SLV_DISP_SS_CFG 34
+#define SLV_VENUS_CFG 35
+#define SLV_SDCC_1 36
+#define SLV_BLSP_1 37
+#define SLV_USB_HS 38
+#define SLV_SDCC_3 39
+#define SLV_SDCC_2 40
+#define SLV_GPU_CFG 41
+#define SLV_USB_HS2 42
+#define SLV_BLSP_2 43
+#define SLV_PCNOC_SNOC 44
+
+/* SNOC fabric */
+#define MAS_QDSS_BAM 0
+#define MAS_BIMC_SNOC 1
+#define MAS_PCNOC_SNOC 2
+#define MAS_QDSS_ETR 3
+#define MAS_LPASS_PROC 4
+#define MAS_IPA 5
+#define QDSS_INT 6
+#define SNOC_INT_0 7
+#define SNOC_INT_1 8
+#define SNOC_INT_2 9
+#define SLV_KPSS_AHB 10
+#define SLV_SNOC_BIMC 11
+#define SLV_IMEM 12
+#define SLV_SNOC_PCNOC 13
+#define SLV_QDSS_STM 14
+#define SLV_CATS_0 15
+#define SLV_CATS_1 16
+#define SLV_LPASS 17
+
+/* SNOC-MM fabric */
+#define MAS_JPEG 0
+#define MAS_OXILI 1
+#define MAS_MDP0 2
+#define MAS_MDP1 3
+#define MAS_VENUS_0 4
+#define MAS_VENUS_1 5
+#define MAS_VFE_0 6
+#define MAS_VFE_1 7
+#define MAS_CPP 8
+#define MM_INT_0 9
+#define SLV_SMMNOC_BIMC 10
+
+#endif /* __DT_BINDINGS_INTERCONNECT_QCOM_MSM8976_H */
#define SLAVE_SERVICE_GEM_NOC_1 16
#define SLAVE_SERVICE_GEM_NOC_2 17
#define SLAVE_SERVICE_GEM_NOC 18
-#define MASTER_MNOC_HF_MEM_NOC_DISP 19
-#define MASTER_MNOC_SF_MEM_NOC_DISP 20
-#define SLAVE_LLCC_DISP 21
#define MASTER_CNOC_LPASS_AG_NOC 0
#define SLAVE_LPASS_CORE_CFG 1
#define MASTER_LLCC 0
#define SLAVE_EBI1 1
-#define MASTER_LLCC_DISP 2
-#define SLAVE_EBI1_DISP 3
#define MASTER_CAMNOC_HF 0
#define MASTER_CAMNOC_ICP 1
#define SLAVE_MNOC_HF_MEM_NOC 10
#define SLAVE_MNOC_SF_MEM_NOC 11
#define SLAVE_SERVICE_MNOC 12
-#define MASTER_MDP0_DISP 13
-#define MASTER_MDP1_DISP 14
-#define MASTER_ROTATOR_DISP 15
-#define SLAVE_MNOC_HF_MEM_NOC_DISP 16
-#define SLAVE_MNOC_SF_MEM_NOC_DISP 17
#define MASTER_CDSP_NOC_CFG 0
#define MASTER_CDSP_PROC 1
#define GIC_SPI 0
#define GIC_PPI 1
+#define GIC_ESPI 2
+#define GIC_EPPI 3
/*
* Interrupt specifier cell 2.
#define IPCC_CLIENT_NSP1 18
#define IPCC_CLIENT_TME 23
#define IPCC_CLIENT_WPSS 24
+#define IPCC_CLIENT_GPDSP0 31
+#define IPCC_CLIENT_GPDSP1 32
#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV1800B_H
+#define _DT_BINDINGS_PINCTRL_CV1800B_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PIN_AUD_AOUTR 1
+#define PIN_SD0_CLK 3
+#define PIN_SD0_CMD 4
+#define PIN_SD0_D0 5
+#define PIN_SD0_D1 7
+#define PIN_SD0_D2 8
+#define PIN_SD0_D3 9
+#define PIN_SD0_CD 11
+#define PIN_SD0_PWR_EN 12
+#define PIN_SPK_EN 14
+#define PIN_UART0_TX 15
+#define PIN_UART0_RX 16
+#define PIN_SPINOR_HOLD_X 17
+#define PIN_SPINOR_SCK 18
+#define PIN_SPINOR_MOSI 19
+#define PIN_SPINOR_WP_X 20
+#define PIN_SPINOR_MISO 21
+#define PIN_SPINOR_CS_X 22
+#define PIN_IIC0_SCL 23
+#define PIN_IIC0_SDA 24
+#define PIN_AUX0 25
+#define PIN_PWR_VBAT_DET 30
+#define PIN_PWR_SEQ2 31
+#define PIN_XTAL_XIN 33
+#define PIN_SD1_GPIO0 35
+#define PIN_SD1_GPIO1 36
+#define PIN_SD1_D3 38
+#define PIN_SD1_D2 39
+#define PIN_SD1_D1 40
+#define PIN_SD1_D0 41
+#define PIN_SD1_CMD 42
+#define PIN_SD1_CLK 43
+#define PIN_ADC1 44
+#define PIN_USB_VBUS_DET 45
+#define PIN_ETH_TXP 47
+#define PIN_ETH_TXM 48
+#define PIN_ETH_RXP 49
+#define PIN_ETH_RXM 50
+#define PIN_MIPIRX4N 56
+#define PIN_MIPIRX4P 57
+#define PIN_MIPIRX3N 58
+#define PIN_MIPIRX3P 59
+#define PIN_MIPIRX2N 60
+#define PIN_MIPIRX2P 61
+#define PIN_MIPIRX1N 62
+#define PIN_MIPIRX1P 63
+#define PIN_MIPIRX0N 64
+#define PIN_MIPIRX0P 65
+#define PIN_AUD_AINL_MIC 67
+
+#endif /* _DT_BINDINGS_PINCTRL_CV1800B_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV1812H_H
+#define _DT_BINDINGS_PINCTRL_CV1812H_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PINPOS(row, col) \
+ ((((row) - 'A' + 1) << 8) + ((col) - 1))
+
+#define PIN_MIPI_TXM4 PINPOS('A', 2)
+#define PIN_MIPIRX0N PINPOS('A', 4)
+#define PIN_MIPIRX3P PINPOS('A', 6)
+#define PIN_MIPIRX4P PINPOS('A', 7)
+#define PIN_VIVO_D2 PINPOS('A', 9)
+#define PIN_VIVO_D3 PINPOS('A', 10)
+#define PIN_VIVO_D10 PINPOS('A', 12)
+#define PIN_USB_VBUS_DET PINPOS('A', 13)
+#define PIN_MIPI_TXP3 PINPOS('B', 1)
+#define PIN_MIPI_TXM3 PINPOS('B', 2)
+#define PIN_MIPI_TXP4 PINPOS('B', 3)
+#define PIN_MIPIRX0P PINPOS('B', 4)
+#define PIN_MIPIRX1N PINPOS('B', 5)
+#define PIN_MIPIRX2N PINPOS('B', 6)
+#define PIN_MIPIRX4N PINPOS('B', 7)
+#define PIN_MIPIRX5N PINPOS('B', 8)
+#define PIN_VIVO_D1 PINPOS('B', 9)
+#define PIN_VIVO_D5 PINPOS('B', 10)
+#define PIN_VIVO_D7 PINPOS('B', 11)
+#define PIN_VIVO_D9 PINPOS('B', 12)
+#define PIN_USB_ID PINPOS('B', 13)
+#define PIN_ETH_RXM PINPOS('B', 15)
+#define PIN_MIPI_TXP2 PINPOS('C', 1)
+#define PIN_MIPI_TXM2 PINPOS('C', 2)
+#define PIN_CAM_PD0 PINPOS('C', 3)
+#define PIN_CAM_MCLK0 PINPOS('C', 4)
+#define PIN_MIPIRX1P PINPOS('C', 5)
+#define PIN_MIPIRX2P PINPOS('C', 6)
+#define PIN_MIPIRX3N PINPOS('C', 7)
+#define PIN_MIPIRX5P PINPOS('C', 8)
+#define PIN_VIVO_CLK PINPOS('C', 9)
+#define PIN_VIVO_D6 PINPOS('C', 10)
+#define PIN_VIVO_D8 PINPOS('C', 11)
+#define PIN_USB_VBUS_EN PINPOS('C', 12)
+#define PIN_ETH_RXP PINPOS('C', 14)
+#define PIN_GPIO_RTX PINPOS('C', 15)
+#define PIN_MIPI_TXP1 PINPOS('D', 1)
+#define PIN_MIPI_TXM1 PINPOS('D', 2)
+#define PIN_CAM_MCLK1 PINPOS('D', 3)
+#define PIN_IIC3_SCL PINPOS('D', 4)
+#define PIN_VIVO_D4 PINPOS('D', 10)
+#define PIN_ETH_TXM PINPOS('D', 14)
+#define PIN_ETH_TXP PINPOS('D', 15)
+#define PIN_MIPI_TXP0 PINPOS('E', 1)
+#define PIN_MIPI_TXM0 PINPOS('E', 2)
+#define PIN_CAM_PD1 PINPOS('E', 4)
+#define PIN_CAM_RST0 PINPOS('E', 5)
+#define PIN_VIVO_D0 PINPOS('E', 10)
+#define PIN_ADC1 PINPOS('E', 13)
+#define PIN_ADC2 PINPOS('E', 14)
+#define PIN_ADC3 PINPOS('E', 15)
+#define PIN_AUD_AOUTL PINPOS('F', 2)
+#define PIN_IIC3_SDA PINPOS('F', 4)
+#define PIN_SD1_D2 PINPOS('F', 14)
+#define PIN_AUD_AOUTR PINPOS('G', 2)
+#define PIN_SD1_D3 PINPOS('G', 13)
+#define PIN_SD1_CLK PINPOS('G', 14)
+#define PIN_SD1_CMD PINPOS('G', 15)
+#define PIN_AUD_AINL_MIC PINPOS('H', 1)
+#define PIN_RSTN PINPOS('H', 12)
+#define PIN_PWM0_BUCK PINPOS('H', 13)
+#define PIN_SD1_D1 PINPOS('H', 14)
+#define PIN_SD1_D0 PINPOS('H', 15)
+#define PIN_AUD_AINR_MIC PINPOS('J', 1)
+#define PIN_IIC2_SCL PINPOS('J', 13)
+#define PIN_IIC2_SDA PINPOS('J', 14)
+#define PIN_SD0_CD PINPOS('K', 2)
+#define PIN_SD0_D1 PINPOS('K', 3)
+#define PIN_UART2_RX PINPOS('K', 13)
+#define PIN_UART2_CTS PINPOS('K', 14)
+#define PIN_UART2_TX PINPOS('K', 15)
+#define PIN_SD0_CLK PINPOS('L', 1)
+#define PIN_SD0_D0 PINPOS('L', 2)
+#define PIN_SD0_CMD PINPOS('L', 3)
+#define PIN_CLK32K PINPOS('L', 14)
+#define PIN_UART2_RTS PINPOS('L', 15)
+#define PIN_SD0_D3 PINPOS('M', 1)
+#define PIN_SD0_D2 PINPOS('M', 2)
+#define PIN_UART0_RX PINPOS('M', 4)
+#define PIN_UART0_TX PINPOS('M', 5)
+#define PIN_JTAG_CPU_TRST PINPOS('M', 6)
+#define PIN_PWR_ON PINPOS('M', 11)
+#define PIN_PWR_GPIO2 PINPOS('M', 12)
+#define PIN_PWR_GPIO0 PINPOS('M', 13)
+#define PIN_CLK25M PINPOS('M', 14)
+#define PIN_SD0_PWR_EN PINPOS('N', 1)
+#define PIN_SPK_EN PINPOS('N', 3)
+#define PIN_JTAG_CPU_TCK PINPOS('N', 4)
+#define PIN_JTAG_CPU_TMS PINPOS('N', 6)
+#define PIN_PWR_WAKEUP1 PINPOS('N', 11)
+#define PIN_PWR_WAKEUP0 PINPOS('N', 12)
+#define PIN_PWR_GPIO1 PINPOS('N', 13)
+#define PIN_EMMC_DAT3 PINPOS('P', 1)
+#define PIN_EMMC_DAT0 PINPOS('P', 2)
+#define PIN_EMMC_DAT2 PINPOS('P', 3)
+#define PIN_EMMC_RSTN PINPOS('P', 4)
+#define PIN_AUX0 PINPOS('P', 5)
+#define PIN_IIC0_SDA PINPOS('P', 6)
+#define PIN_PWR_SEQ3 PINPOS('P', 10)
+#define PIN_PWR_VBAT_DET PINPOS('P', 11)
+#define PIN_PWR_SEQ1 PINPOS('P', 12)
+#define PIN_PWR_BUTTON1 PINPOS('P', 13)
+#define PIN_EMMC_DAT1 PINPOS('R', 2)
+#define PIN_EMMC_CMD PINPOS('R', 3)
+#define PIN_EMMC_CLK PINPOS('R', 4)
+#define PIN_IIC0_SCL PINPOS('R', 6)
+#define PIN_GPIO_ZQ PINPOS('R', 10)
+#define PIN_PWR_RSTN PINPOS('R', 11)
+#define PIN_PWR_SEQ2 PINPOS('R', 12)
+#define PIN_XTAL_XIN PINPOS('R', 13)
+
+#endif /* _DT_BINDINGS_PINCTRL_CV1812H_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Ltd.
+ *
+ * Author: Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV18XX_H
+#define _DT_BINDINGS_PINCTRL_CV18XX_H
+
+#define PIN_MUX_INVALD 0xff
+
+#define PINMUX2(pin, mux, mux2) \
+ (((pin) & 0xffff) | (((mux) & 0xff) << 16) | (((mux2) & 0xff) << 24))
+
+#define PINMUX(pin, mux) \
+ PINMUX2(pin, mux, PIN_MUX_INVALD)
+
+#endif /* _DT_BINDINGS_PINCTRL_CV18XX_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2000_H
+#define _DT_BINDINGS_PINCTRL_SG2000_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PINPOS(row, col) \
+ ((((row) - 'A' + 1) << 8) + ((col) - 1))
+
+#define PIN_MIPI_TXM4 PINPOS('A', 2)
+#define PIN_MIPIRX0N PINPOS('A', 4)
+#define PIN_MIPIRX3P PINPOS('A', 6)
+#define PIN_MIPIRX4P PINPOS('A', 7)
+#define PIN_VIVO_D2 PINPOS('A', 9)
+#define PIN_VIVO_D3 PINPOS('A', 10)
+#define PIN_VIVO_D10 PINPOS('A', 12)
+#define PIN_USB_VBUS_DET PINPOS('A', 13)
+#define PIN_MIPI_TXP3 PINPOS('B', 1)
+#define PIN_MIPI_TXM3 PINPOS('B', 2)
+#define PIN_MIPI_TXP4 PINPOS('B', 3)
+#define PIN_MIPIRX0P PINPOS('B', 4)
+#define PIN_MIPIRX1N PINPOS('B', 5)
+#define PIN_MIPIRX2N PINPOS('B', 6)
+#define PIN_MIPIRX4N PINPOS('B', 7)
+#define PIN_MIPIRX5N PINPOS('B', 8)
+#define PIN_VIVO_D1 PINPOS('B', 9)
+#define PIN_VIVO_D5 PINPOS('B', 10)
+#define PIN_VIVO_D7 PINPOS('B', 11)
+#define PIN_VIVO_D9 PINPOS('B', 12)
+#define PIN_USB_ID PINPOS('B', 13)
+#define PIN_ETH_RXM PINPOS('B', 15)
+#define PIN_MIPI_TXP2 PINPOS('C', 1)
+#define PIN_MIPI_TXM2 PINPOS('C', 2)
+#define PIN_CAM_PD0 PINPOS('C', 3)
+#define PIN_CAM_MCLK0 PINPOS('C', 4)
+#define PIN_MIPIRX1P PINPOS('C', 5)
+#define PIN_MIPIRX2P PINPOS('C', 6)
+#define PIN_MIPIRX3N PINPOS('C', 7)
+#define PIN_MIPIRX5P PINPOS('C', 8)
+#define PIN_VIVO_CLK PINPOS('C', 9)
+#define PIN_VIVO_D6 PINPOS('C', 10)
+#define PIN_VIVO_D8 PINPOS('C', 11)
+#define PIN_USB_VBUS_EN PINPOS('C', 12)
+#define PIN_ETH_RXP PINPOS('C', 14)
+#define PIN_GPIO_RTX PINPOS('C', 15)
+#define PIN_MIPI_TXP1 PINPOS('D', 1)
+#define PIN_MIPI_TXM1 PINPOS('D', 2)
+#define PIN_CAM_MCLK1 PINPOS('D', 3)
+#define PIN_IIC3_SCL PINPOS('D', 4)
+#define PIN_VIVO_D4 PINPOS('D', 10)
+#define PIN_ETH_TXM PINPOS('D', 14)
+#define PIN_ETH_TXP PINPOS('D', 15)
+#define PIN_MIPI_TXP0 PINPOS('E', 1)
+#define PIN_MIPI_TXM0 PINPOS('E', 2)
+#define PIN_CAM_PD1 PINPOS('E', 4)
+#define PIN_CAM_RST0 PINPOS('E', 5)
+#define PIN_VIVO_D0 PINPOS('E', 10)
+#define PIN_ADC1 PINPOS('E', 13)
+#define PIN_ADC2 PINPOS('E', 14)
+#define PIN_ADC3 PINPOS('E', 15)
+#define PIN_AUD_AOUTL PINPOS('F', 2)
+#define PIN_IIC3_SDA PINPOS('F', 4)
+#define PIN_SD1_D2 PINPOS('F', 14)
+#define PIN_AUD_AOUTR PINPOS('G', 2)
+#define PIN_SD1_D3 PINPOS('G', 13)
+#define PIN_SD1_CLK PINPOS('G', 14)
+#define PIN_SD1_CMD PINPOS('G', 15)
+#define PIN_AUD_AINL_MIC PINPOS('H', 1)
+#define PIN_RSTN PINPOS('H', 12)
+#define PIN_PWM0_BUCK PINPOS('H', 13)
+#define PIN_SD1_D1 PINPOS('H', 14)
+#define PIN_SD1_D0 PINPOS('H', 15)
+#define PIN_AUD_AINR_MIC PINPOS('J', 1)
+#define PIN_IIC2_SCL PINPOS('J', 13)
+#define PIN_IIC2_SDA PINPOS('J', 14)
+#define PIN_SD0_CD PINPOS('K', 2)
+#define PIN_SD0_D1 PINPOS('K', 3)
+#define PIN_UART2_RX PINPOS('K', 13)
+#define PIN_UART2_CTS PINPOS('K', 14)
+#define PIN_UART2_TX PINPOS('K', 15)
+#define PIN_SD0_CLK PINPOS('L', 1)
+#define PIN_SD0_D0 PINPOS('L', 2)
+#define PIN_SD0_CMD PINPOS('L', 3)
+#define PIN_CLK32K PINPOS('L', 14)
+#define PIN_UART2_RTS PINPOS('L', 15)
+#define PIN_SD0_D3 PINPOS('M', 1)
+#define PIN_SD0_D2 PINPOS('M', 2)
+#define PIN_UART0_RX PINPOS('M', 4)
+#define PIN_UART0_TX PINPOS('M', 5)
+#define PIN_JTAG_CPU_TRST PINPOS('M', 6)
+#define PIN_PWR_ON PINPOS('M', 11)
+#define PIN_PWR_GPIO2 PINPOS('M', 12)
+#define PIN_PWR_GPIO0 PINPOS('M', 13)
+#define PIN_CLK25M PINPOS('M', 14)
+#define PIN_SD0_PWR_EN PINPOS('N', 1)
+#define PIN_SPK_EN PINPOS('N', 3)
+#define PIN_JTAG_CPU_TCK PINPOS('N', 4)
+#define PIN_JTAG_CPU_TMS PINPOS('N', 6)
+#define PIN_PWR_WAKEUP1 PINPOS('N', 11)
+#define PIN_PWR_WAKEUP0 PINPOS('N', 12)
+#define PIN_PWR_GPIO1 PINPOS('N', 13)
+#define PIN_EMMC_DAT3 PINPOS('P', 1)
+#define PIN_EMMC_DAT0 PINPOS('P', 2)
+#define PIN_EMMC_DAT2 PINPOS('P', 3)
+#define PIN_EMMC_RSTN PINPOS('P', 4)
+#define PIN_AUX0 PINPOS('P', 5)
+#define PIN_IIC0_SDA PINPOS('P', 6)
+#define PIN_PWR_SEQ3 PINPOS('P', 10)
+#define PIN_PWR_VBAT_DET PINPOS('P', 11)
+#define PIN_PWR_SEQ1 PINPOS('P', 12)
+#define PIN_PWR_BUTTON1 PINPOS('P', 13)
+#define PIN_EMMC_DAT1 PINPOS('R', 2)
+#define PIN_EMMC_CMD PINPOS('R', 3)
+#define PIN_EMMC_CLK PINPOS('R', 4)
+#define PIN_IIC0_SCL PINPOS('R', 6)
+#define PIN_GPIO_ZQ PINPOS('R', 10)
+#define PIN_PWR_RSTN PINPOS('R', 11)
+#define PIN_PWR_SEQ2 PINPOS('R', 12)
+#define PIN_XTAL_XIN PINPOS('R', 13)
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2000_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2002_H
+#define _DT_BINDINGS_PINCTRL_SG2002_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PIN_AUD_AINL_MIC 2
+#define PIN_AUD_AOUTR 4
+#define PIN_SD0_CLK 6
+#define PIN_SD0_CMD 7
+#define PIN_SD0_D0 8
+#define PIN_SD0_D1 10
+#define PIN_SD0_D2 11
+#define PIN_SD0_D3 12
+#define PIN_SD0_CD 14
+#define PIN_SD0_PWR_EN 15
+#define PIN_SPK_EN 17
+#define PIN_UART0_TX 18
+#define PIN_UART0_RX 19
+#define PIN_EMMC_DAT2 20
+#define PIN_EMMC_CLK 21
+#define PIN_EMMC_DAT0 22
+#define PIN_EMMC_DAT3 23
+#define PIN_EMMC_CMD 24
+#define PIN_EMMC_DAT1 25
+#define PIN_JTAG_CPU_TMS 26
+#define PIN_JTAG_CPU_TCK 27
+#define PIN_IIC0_SCL 28
+#define PIN_IIC0_SDA 29
+#define PIN_AUX0 30
+#define PIN_GPIO_ZQ 35
+#define PIN_PWR_VBAT_DET 38
+#define PIN_PWR_RSTN 39
+#define PIN_PWR_SEQ1 40
+#define PIN_PWR_SEQ2 41
+#define PIN_PWR_WAKEUP0 43
+#define PIN_PWR_BUTTON1 44
+#define PIN_XTAL_XIN 45
+#define PIN_PWR_GPIO0 47
+#define PIN_PWR_GPIO1 48
+#define PIN_PWR_GPIO2 49
+#define PIN_SD1_D3 51
+#define PIN_SD1_D2 52
+#define PIN_SD1_D1 53
+#define PIN_SD1_D0 54
+#define PIN_SD1_CMD 55
+#define PIN_SD1_CLK 56
+#define PIN_PWM0_BUCK 58
+#define PIN_ADC1 59
+#define PIN_USB_VBUS_DET 60
+#define PIN_ETH_TXP 62
+#define PIN_ETH_TXM 63
+#define PIN_ETH_RXP 64
+#define PIN_ETH_RXM 65
+#define PIN_GPIO_RTX 67
+#define PIN_MIPIRX4N 72
+#define PIN_MIPIRX4P 73
+#define PIN_MIPIRX3N 74
+#define PIN_MIPIRX3P 75
+#define PIN_MIPIRX2N 76
+#define PIN_MIPIRX2P 77
+#define PIN_MIPIRX1N 78
+#define PIN_MIPIRX1P 79
+#define PIN_MIPIRX0N 80
+#define PIN_MIPIRX0P 81
+#define PIN_MIPI_TXM2 83
+#define PIN_MIPI_TXP2 84
+#define PIN_MIPI_TXM1 85
+#define PIN_MIPI_TXP1 86
+#define PIN_MIPI_TXM0 87
+#define PIN_MIPI_TXP0 88
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2002_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+#ifndef __DT_BINDINGS_POWER_RK3576_POWER_H__
+#define __DT_BINDINGS_POWER_RK3576_POWER_H__
+
+/* VD_NPU */
+#define RK3576_PD_NPU 0
+#define RK3576_PD_NPUTOP 1
+#define RK3576_PD_NPU0 2
+#define RK3576_PD_NPU1 3
+
+/* VD_GPU */
+#define RK3576_PD_GPU 4
+
+/* VD_LOGIC */
+#define RK3576_PD_NVM 5
+#define RK3576_PD_SDGMAC 6
+#define RK3576_PD_USB 7
+#define RK3576_PD_PHP 8
+#define RK3576_PD_SUBPHP 9
+#define RK3576_PD_AUDIO 10
+#define RK3576_PD_VEPU0 11
+#define RK3576_PD_VEPU1 12
+#define RK3576_PD_VPU 13
+#define RK3576_PD_VDEC 14
+#define RK3576_PD_VI 15
+#define RK3576_PD_VO0 16
+#define RK3576_PD_VO1 17
+#define RK3576_PD_VOP 18
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co. Ltd.
+ * Copyright (c) 2024 Collabora Ltd.
+ *
+ * Author: Elaine Zhang <zhangqing@rock-chips.com>
+ * Author: Detlev Casanova <detlev.casanova@collabora.com>
+ */
+
+#ifndef _DT_BINDINGS_RESET_ROCKCHIP_RK3576_H
+#define _DT_BINDINGS_RESET_ROCKCHIP_RK3576_H
+
+#define SRST_A_TOP_BIU 0
+#define SRST_P_TOP_BIU 1
+#define SRST_A_TOP_MID_BIU 2
+#define SRST_A_SECURE_HIGH_BIU 3
+#define SRST_H_TOP_BIU 4
+
+#define SRST_H_VO0VOP_CHANNEL_BIU 5
+#define SRST_A_VO0VOP_CHANNEL_BIU 6
+
+#define SRST_BISRINTF 7
+
+#define SRST_H_AUDIO_BIU 8
+#define SRST_H_ASRC_2CH_0 9
+#define SRST_H_ASRC_2CH_1 10
+#define SRST_H_ASRC_4CH_0 11
+#define SRST_H_ASRC_4CH_1 12
+#define SRST_ASRC_2CH_0 13
+#define SRST_ASRC_2CH_1 14
+#define SRST_ASRC_4CH_0 15
+#define SRST_ASRC_4CH_1 16
+#define SRST_M_SAI0_8CH 17
+#define SRST_H_SAI0_8CH 18
+#define SRST_H_SPDIF_RX0 19
+#define SRST_M_SPDIF_RX0 20
+
+#define SRST_H_SPDIF_RX1 21
+#define SRST_M_SPDIF_RX1 22
+#define SRST_M_SAI1_8CH 23
+#define SRST_H_SAI1_8CH 24
+#define SRST_M_SAI2_2CH 25
+#define SRST_H_SAI2_2CH 26
+#define SRST_M_SAI3_2CH 27
+#define SRST_H_SAI3_2CH 28
+
+#define SRST_M_SAI4_2CH 29
+#define SRST_H_SAI4_2CH 30
+#define SRST_H_ACDCDIG_DSM 31
+#define SRST_M_ACDCDIG_DSM 32
+#define SRST_PDM1 33
+#define SRST_H_PDM1 34
+#define SRST_M_PDM1 35
+#define SRST_H_SPDIF_TX0 36
+#define SRST_M_SPDIF_TX0 37
+#define SRST_H_SPDIF_TX1 38
+#define SRST_M_SPDIF_TX1 39
+
+#define SRST_A_BUS_BIU 40
+#define SRST_P_BUS_BIU 41
+#define SRST_P_CRU 42
+#define SRST_H_CAN0 43
+#define SRST_CAN0 44
+#define SRST_H_CAN1 45
+#define SRST_CAN1 46
+#define SRST_P_INTMUX2BUS 47
+#define SRST_P_VCCIO_IOC 48
+#define SRST_H_BUS_BIU 49
+#define SRST_KEY_SHIFT 50
+
+#define SRST_P_I2C1 51
+#define SRST_P_I2C2 52
+#define SRST_P_I2C3 53
+#define SRST_P_I2C4 54
+#define SRST_P_I2C5 55
+#define SRST_P_I2C6 56
+#define SRST_P_I2C7 57
+#define SRST_P_I2C8 58
+#define SRST_P_I2C9 59
+#define SRST_P_WDT_BUSMCU 60
+#define SRST_T_WDT_BUSMCU 61
+#define SRST_A_GIC 62
+#define SRST_I2C1 63
+#define SRST_I2C2 64
+#define SRST_I2C3 65
+#define SRST_I2C4 66
+
+#define SRST_I2C5 67
+#define SRST_I2C6 68
+#define SRST_I2C7 69
+#define SRST_I2C8 70
+#define SRST_I2C9 71
+#define SRST_P_SARADC 72
+#define SRST_SARADC 73
+#define SRST_P_TSADC 74
+#define SRST_TSADC 75
+#define SRST_P_UART0 76
+#define SRST_P_UART2 77
+#define SRST_P_UART3 78
+#define SRST_P_UART4 79
+#define SRST_P_UART5 80
+#define SRST_P_UART6 81
+
+#define SRST_P_UART7 82
+#define SRST_P_UART8 83
+#define SRST_P_UART9 84
+#define SRST_P_UART10 85
+#define SRST_P_UART11 86
+#define SRST_S_UART0 87
+#define SRST_S_UART2 88
+#define SRST_S_UART3 89
+#define SRST_S_UART4 90
+#define SRST_S_UART5 91
+
+#define SRST_S_UART6 92
+#define SRST_S_UART7 93
+#define SRST_S_UART8 94
+#define SRST_S_UART9 95
+#define SRST_S_UART10 96
+#define SRST_S_UART11 97
+#define SRST_P_SPI0 98
+#define SRST_P_SPI1 99
+#define SRST_P_SPI2 100
+
+#define SRST_P_SPI3 101
+#define SRST_P_SPI4 102
+#define SRST_SPI0 103
+#define SRST_SPI1 104
+#define SRST_SPI2 105
+#define SRST_SPI3 106
+#define SRST_SPI4 107
+#define SRST_P_WDT0 108
+#define SRST_T_WDT0 109
+#define SRST_P_SYS_GRF 110
+#define SRST_P_PWM1 111
+#define SRST_PWM1 112
+
+#define SRST_P_BUSTIMER0 113
+#define SRST_P_BUSTIMER1 114
+#define SRST_TIMER0 115
+#define SRST_TIMER1 116
+#define SRST_TIMER2 117
+#define SRST_TIMER3 118
+#define SRST_TIMER4 119
+#define SRST_TIMER5 120
+#define SRST_P_BUSIOC 121
+#define SRST_P_MAILBOX0 122
+#define SRST_P_GPIO1 123
+
+#define SRST_GPIO1 124
+#define SRST_P_GPIO2 125
+#define SRST_GPIO2 126
+#define SRST_P_GPIO3 127
+#define SRST_GPIO3 128
+#define SRST_P_GPIO4 129
+#define SRST_GPIO4 130
+#define SRST_A_DECOM 131
+#define SRST_P_DECOM 132
+#define SRST_D_DECOM 133
+#define SRST_TIMER6 134
+#define SRST_TIMER7 135
+#define SRST_TIMER8 136
+#define SRST_TIMER9 137
+#define SRST_TIMER10 138
+
+#define SRST_TIMER11 139
+#define SRST_A_DMAC0 140
+#define SRST_A_DMAC1 141
+#define SRST_A_DMAC2 142
+#define SRST_A_SPINLOCK 143
+#define SRST_REF_PVTPLL_BUS 144
+#define SRST_H_I3C0 145
+#define SRST_H_I3C1 146
+#define SRST_H_BUS_CM0_BIU 147
+#define SRST_F_BUS_CM0_CORE 148
+#define SRST_T_BUS_CM0_JTAG 149
+
+#define SRST_P_INTMUX2PMU 150
+#define SRST_P_INTMUX2DDR 151
+#define SRST_P_PVTPLL_BUS 152
+#define SRST_P_PWM2 153
+#define SRST_PWM2 154
+#define SRST_FREQ_PWM1 155
+#define SRST_COUNTER_PWM1 156
+#define SRST_I3C0 157
+#define SRST_I3C1 158
+
+#define SRST_P_DDR_MON_CH0 159
+#define SRST_P_DDR_BIU 160
+#define SRST_P_DDR_UPCTL_CH0 161
+#define SRST_TM_DDR_MON_CH0 162
+#define SRST_A_DDR_BIU 163
+#define SRST_DFI_CH0 164
+#define SRST_DDR_MON_CH0 165
+#define SRST_P_DDR_HWLP_CH0 166
+#define SRST_P_DDR_MON_CH1 167
+#define SRST_P_DDR_HWLP_CH1 168
+
+#define SRST_P_DDR_UPCTL_CH1 169
+#define SRST_TM_DDR_MON_CH1 170
+#define SRST_DFI_CH1 171
+#define SRST_A_DDR01_MSCH0 172
+#define SRST_A_DDR01_MSCH1 173
+#define SRST_DDR_MON_CH1 174
+#define SRST_DDR_SCRAMBLE_CH0 175
+#define SRST_DDR_SCRAMBLE_CH1 176
+#define SRST_P_AHB2APB 177
+#define SRST_H_AHB2APB 178
+#define SRST_H_DDR_BIU 179
+#define SRST_F_DDR_CM0_CORE 180
+
+#define SRST_P_DDR01_MSCH0 181
+#define SRST_P_DDR01_MSCH1 182
+#define SRST_DDR_TIMER0 183
+#define SRST_DDR_TIMER1 184
+#define SRST_T_WDT_DDR 185
+#define SRST_P_WDT 186
+#define SRST_P_TIMER 187
+#define SRST_T_DDR_CM0_JTAG 188
+#define SRST_P_DDR_GRF 189
+
+#define SRST_DDR_UPCTL_CH0 190
+#define SRST_A_DDR_UPCTL_0_CH0 191
+#define SRST_A_DDR_UPCTL_1_CH0 192
+#define SRST_A_DDR_UPCTL_2_CH0 193
+#define SRST_A_DDR_UPCTL_3_CH0 194
+#define SRST_A_DDR_UPCTL_4_CH0 195
+
+#define SRST_DDR_UPCTL_CH1 196
+#define SRST_A_DDR_UPCTL_0_CH1 197
+#define SRST_A_DDR_UPCTL_1_CH1 198
+#define SRST_A_DDR_UPCTL_2_CH1 199
+#define SRST_A_DDR_UPCTL_3_CH1 200
+#define SRST_A_DDR_UPCTL_4_CH1 201
+
+#define SRST_REF_PVTPLL_DDR 202
+#define SRST_P_PVTPLL_DDR 203
+
+#define SRST_A_RKNN0 204
+#define SRST_A_RKNN0_BIU 205
+#define SRST_L_RKNN0_BIU 206
+
+#define SRST_A_RKNN1 207
+#define SRST_A_RKNN1_BIU 208
+#define SRST_L_RKNN1_BIU 209
+
+#define SRST_NPU_DAP 210
+#define SRST_L_NPUSUBSYS_BIU 211
+#define SRST_P_NPUTOP_BIU 212
+#define SRST_P_NPU_TIMER 213
+#define SRST_NPUTIMER0 214
+#define SRST_NPUTIMER1 215
+#define SRST_P_NPU_WDT 216
+#define SRST_T_NPU_WDT 217
+
+#define SRST_A_RKNN_CBUF 218
+#define SRST_A_RVCORE0 219
+#define SRST_P_NPU_GRF 220
+#define SRST_P_PVTPLL_NPU 221
+#define SRST_NPU_PVTPLL 222
+#define SRST_H_NPU_CM0_BIU 223
+#define SRST_F_NPU_CM0_CORE 224
+#define SRST_T_NPU_CM0_JTAG 225
+#define SRST_A_RKNNTOP_BIU 226
+#define SRST_H_RKNN_CBUF 227
+#define SRST_H_RKNNTOP_BIU 228
+
+#define SRST_H_NVM_BIU 229
+#define SRST_A_NVM_BIU 230
+#define SRST_S_FSPI 231
+#define SRST_H_FSPI 232
+#define SRST_C_EMMC 233
+#define SRST_H_EMMC 234
+#define SRST_A_EMMC 235
+#define SRST_B_EMMC 236
+#define SRST_T_EMMC 237
+
+#define SRST_P_GRF 238
+#define SRST_P_PHP_BIU 239
+#define SRST_A_PHP_BIU 240
+#define SRST_P_PCIE0 241
+#define SRST_PCIE0_POWER_UP 242
+
+#define SRST_A_USB3OTG1 243
+#define SRST_A_MMU0 244
+#define SRST_A_SLV_MMU0 245
+#define SRST_A_MMU1 246
+
+#define SRST_A_SLV_MMU1 247
+#define SRST_P_PCIE1 248
+#define SRST_PCIE1_POWER_UP 249
+
+#define SRST_RXOOB0 250
+#define SRST_RXOOB1 251
+#define SRST_PMALIVE0 252
+#define SRST_PMALIVE1 253
+#define SRST_A_SATA0 254
+#define SRST_A_SATA1 255
+#define SRST_ASIC1 256
+#define SRST_ASIC0 257
+
+#define SRST_P_CSIDPHY1 258
+#define SRST_SCAN_CSIDPHY1 259
+
+#define SRST_P_SDGMAC_GRF 260
+#define SRST_P_SDGMAC_BIU 261
+#define SRST_A_SDGMAC_BIU 262
+#define SRST_H_SDGMAC_BIU 263
+#define SRST_A_GMAC0 264
+#define SRST_A_GMAC1 265
+#define SRST_P_GMAC0 266
+#define SRST_P_GMAC1 267
+#define SRST_H_SDIO 268
+
+#define SRST_H_SDMMC0 269
+#define SRST_S_FSPI1 270
+#define SRST_H_FSPI1 271
+#define SRST_A_DSMC_BIU 272
+#define SRST_A_DSMC 273
+#define SRST_P_DSMC 274
+#define SRST_H_HSGPIO 275
+#define SRST_HSGPIO 276
+#define SRST_A_HSGPIO 277
+
+#define SRST_H_RKVDEC 278
+#define SRST_H_RKVDEC_BIU 279
+#define SRST_A_RKVDEC_BIU 280
+#define SRST_RKVDEC_HEVC_CA 281
+#define SRST_RKVDEC_CORE 282
+
+#define SRST_A_USB_BIU 283
+#define SRST_P_USBUFS_BIU 284
+#define SRST_A_USB3OTG0 285
+#define SRST_A_UFS_BIU 286
+#define SRST_A_MMU2 287
+#define SRST_A_SLV_MMU2 288
+#define SRST_A_UFS_SYS 289
+
+#define SRST_A_UFS 290
+#define SRST_P_USBUFS_GRF 291
+#define SRST_P_UFS_GRF 292
+
+#define SRST_H_VPU_BIU 293
+#define SRST_A_JPEG_BIU 294
+#define SRST_A_RGA_BIU 295
+#define SRST_A_VDPP_BIU 296
+#define SRST_A_EBC_BIU 297
+#define SRST_H_RGA2E_0 298
+#define SRST_A_RGA2E_0 299
+#define SRST_CORE_RGA2E_0 300
+
+#define SRST_A_JPEG 301
+#define SRST_H_JPEG 302
+#define SRST_H_VDPP 303
+#define SRST_A_VDPP 304
+#define SRST_CORE_VDPP 305
+#define SRST_H_RGA2E_1 306
+#define SRST_A_RGA2E_1 307
+#define SRST_CORE_RGA2E_1 308
+#define SRST_H_EBC 309
+#define SRST_A_EBC 310
+#define SRST_D_EBC 311
+
+#define SRST_H_VEPU0_BIU 312
+#define SRST_A_VEPU0_BIU 313
+#define SRST_H_VEPU0 314
+#define SRST_A_VEPU0 315
+#define SRST_VEPU0_CORE 316
+
+#define SRST_A_VI_BIU 317
+#define SRST_H_VI_BIU 318
+#define SRST_P_VI_BIU 319
+#define SRST_D_VICAP 320
+#define SRST_A_VICAP 321
+#define SRST_H_VICAP 322
+#define SRST_ISP0 323
+#define SRST_ISP0_VICAP 324
+
+#define SRST_CORE_VPSS 325
+#define SRST_P_CSI_HOST_0 326
+#define SRST_P_CSI_HOST_1 327
+#define SRST_P_CSI_HOST_2 328
+#define SRST_P_CSI_HOST_3 329
+#define SRST_P_CSI_HOST_4 330
+
+#define SRST_CIFIN 331
+#define SRST_VICAP_I0CLK 332
+#define SRST_VICAP_I1CLK 333
+#define SRST_VICAP_I2CLK 334
+#define SRST_VICAP_I3CLK 335
+#define SRST_VICAP_I4CLK 336
+
+#define SRST_A_VOP_BIU 337
+#define SRST_A_VOP2_BIU 338
+#define SRST_H_VOP_BIU 339
+#define SRST_P_VOP_BIU 340
+#define SRST_H_VOP 341
+#define SRST_A_VOP 342
+#define SRST_D_VP0 343
+
+#define SRST_D_VP1 344
+#define SRST_D_VP2 345
+#define SRST_P_VOP2_BIU 346
+#define SRST_P_VOPGRF 347
+
+#define SRST_H_VO0_BIU 348
+#define SRST_P_VO0_BIU 349
+#define SRST_A_HDCP0_BIU 350
+#define SRST_P_VO0_GRF 351
+#define SRST_A_HDCP0 352
+#define SRST_H_HDCP0 353
+#define SRST_HDCP0 354
+
+#define SRST_P_DSIHOST0 355
+#define SRST_DSIHOST0 356
+#define SRST_P_HDMITX0 357
+#define SRST_HDMITX0_REF 358
+#define SRST_P_EDP0 359
+#define SRST_EDP0_24M 360
+
+#define SRST_M_SAI5_8CH 361
+#define SRST_H_SAI5_8CH 362
+#define SRST_M_SAI6_8CH 363
+#define SRST_H_SAI6_8CH 364
+#define SRST_H_SPDIF_TX2 365
+#define SRST_M_SPDIF_TX2 366
+#define SRST_H_SPDIF_RX2 367
+#define SRST_M_SPDIF_RX2 368
+
+#define SRST_H_SAI8_8CH 369
+#define SRST_M_SAI8_8CH 370
+
+#define SRST_H_VO1_BIU 371
+#define SRST_P_VO1_BIU 372
+#define SRST_M_SAI7_8CH 373
+#define SRST_H_SAI7_8CH 374
+#define SRST_H_SPDIF_TX3 375
+#define SRST_H_SPDIF_TX4 376
+#define SRST_H_SPDIF_TX5 377
+#define SRST_M_SPDIF_TX3 378
+
+#define SRST_DP0 379
+#define SRST_P_VO1_GRF 380
+#define SRST_A_HDCP1_BIU 381
+#define SRST_A_HDCP1 382
+#define SRST_H_HDCP1 383
+#define SRST_HDCP1 384
+#define SRST_H_SAI9_8CH 385
+#define SRST_M_SAI9_8CH 386
+#define SRST_M_SPDIF_TX4 387
+#define SRST_M_SPDIF_TX5 388
+
+#define SRST_GPU 389
+#define SRST_A_S_GPU_BIU 390
+#define SRST_A_M0_GPU_BIU 391
+#define SRST_P_GPU_BIU 392
+#define SRST_P_GPU_GRF 393
+#define SRST_GPU_PVTPLL 394
+#define SRST_P_PVTPLL_GPU 395
+
+#define SRST_A_CENTER_BIU 396
+#define SRST_A_DMA2DDR 397
+#define SRST_A_DDR_SHAREMEM 398
+#define SRST_A_DDR_SHAREMEM_BIU 399
+#define SRST_H_CENTER_BIU 400
+#define SRST_P_CENTER_GRF 401
+#define SRST_P_DMA2DDR 402
+#define SRST_P_SHAREMEM 403
+#define SRST_P_CENTER_BIU 404
+
+#define SRST_LINKSYM_HDMITXPHY0 405
+
+#define SRST_DP0_PIXELCLK 406
+#define SRST_PHY_DP0_TX 407
+#define SRST_DP1_PIXELCLK 408
+#define SRST_DP2_PIXELCLK 409
+
+#define SRST_H_VEPU1_BIU 410
+#define SRST_A_VEPU1_BIU 411
+#define SRST_H_VEPU1 412
+#define SRST_A_VEPU1 413
+#define SRST_VEPU1_CORE 414
+
+#define SRST_P_PHPPHY_CRU 415
+#define SRST_P_APB2ASB_SLV_CHIP_TOP 416
+#define SRST_P_PCIE2_COMBOPHY0 417
+#define SRST_P_PCIE2_COMBOPHY0_GRF 418
+#define SRST_P_PCIE2_COMBOPHY1 419
+#define SRST_P_PCIE2_COMBOPHY1_GRF 420
+
+#define SRST_PCIE0_PIPE_PHY 421
+#define SRST_PCIE1_PIPE_PHY 422
+
+#define SRST_H_CRYPTO_NS 423
+#define SRST_H_TRNG_NS 424
+#define SRST_P_OTPC_NS 425
+#define SRST_OTPC_NS 426
+
+#define SRST_P_HDPTX_GRF 427
+#define SRST_P_HDPTX_APB 428
+#define SRST_P_MIPI_DCPHY 429
+#define SRST_P_DCPHY_GRF 430
+#define SRST_P_BOT0_APB2ASB 431
+#define SRST_P_BOT1_APB2ASB 432
+#define SRST_USB2DEBUG 433
+#define SRST_P_CSIPHY_GRF 434
+#define SRST_P_CSIPHY 435
+#define SRST_P_USBPHY_GRF_0 436
+#define SRST_P_USBPHY_GRF_1 437
+#define SRST_P_USBDP_GRF 438
+#define SRST_P_USBDPPHY 439
+#define SRST_USBDP_COMBO_PHY_INIT 440
+
+#define SRST_USBDP_COMBO_PHY_CMN 441
+#define SRST_USBDP_COMBO_PHY_LANE 442
+#define SRST_USBDP_COMBO_PHY_PCS 443
+#define SRST_M_MIPI_DCPHY 444
+#define SRST_S_MIPI_DCPHY 445
+#define SRST_SCAN_CSIPHY 446
+#define SRST_P_VCCIO6_IOC 447
+#define SRST_OTGPHY_0 448
+#define SRST_OTGPHY_1 449
+#define SRST_HDPTX_INIT 450
+#define SRST_HDPTX_CMN 451
+#define SRST_HDPTX_LANE 452
+#define SRST_HDMITXHDP 453
+
+#define SRST_MPHY_INIT 454
+#define SRST_P_MPHY_GRF 455
+#define SRST_P_VCCIO7_IOC 456
+
+#define SRST_H_PMU1_BIU 457
+#define SRST_P_PMU1_NIU 458
+#define SRST_H_PMU_CM0_BIU 459
+#define SRST_PMU_CM0_CORE 460
+#define SRST_PMU_CM0_JTAG 461
+
+#define SRST_P_CRU_PMU1 462
+#define SRST_P_PMU1_GRF 463
+#define SRST_P_PMU1_IOC 464
+#define SRST_P_PMU1WDT 465
+#define SRST_T_PMU1WDT 466
+#define SRST_P_PMUTIMER 467
+#define SRST_PMUTIMER0 468
+#define SRST_PMUTIMER1 469
+#define SRST_P_PMU1PWM 470
+#define SRST_PMU1PWM 471
+
+#define SRST_P_I2C0 472
+#define SRST_I2C0 473
+#define SRST_S_UART1 474
+#define SRST_P_UART1 475
+#define SRST_PDM0 476
+#define SRST_H_PDM0 477
+
+#define SRST_M_PDM0 478
+#define SRST_H_VAD 479
+
+#define SRST_P_PMU0GRF 480
+#define SRST_P_PMU0IOC 481
+#define SRST_P_GPIO0 482
+#define SRST_DB_GPIO0 483
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+
+#ifndef __DT_BINDINGS_SOC_FSL_QE_TSA_H
+#define __DT_BINDINGS_SOC_FSL_QE_TSA_H
+
+#define FSL_QE_TSA_NU 0
+#define FSL_QE_TSA_UCC1 1
+#define FSL_QE_TSA_UCC2 2
+#define FSL_QE_TSA_UCC3 3
+#define FSL_QE_TSA_UCC4 4
+#define FSL_QE_TSA_UCC5 5
+
+#endif
gpio-keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
pal-switch {
};
/* PMU with one IRQ line per core */
- pmu: pmu@0 {
+ pmu: pmu {
compatible = "arm,arm11mpcore-pmu";
interrupt-parent = <&intc>;
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
<0x1f000100 0x100>;
};
- L2: cache-controller {
+ L2: cache-controller@1f002000 {
compatible = "arm,l220-cache";
reg = <0x1f002000 0x1000>;
interrupt-parent = <&intc_tc11mp>;
};
};
- pmu: pmu@0 {
+ pmu: pmu {
compatible = "arm,cortex-a8-pmu";
interrupt-parent = <&intc>;
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <1 14 0xf04>;
};
- pmu: pmu@0 {
+ pmu: pmu {
compatible = "arm,cortex-a9-pmu";
interrupt-parent = <&intc>;
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
*/
i2c80 = &nvme_m2_0;
i2c81 = &nvme_m2_1;
+
+ /*
+ * i2c bus 82 assigned to OCP slot
+ */
+ i2c82 = &ocpslot;
};
chosen {
reg = <0x70>;
i2c-mux-idle-disconnect;
+ ocpslot: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ ocpslot_temp: temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+
nvmeslot_0_7: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
memory-region = <&gfx_memory>;
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
serial7 = &uart8;
serial8 = &uart9;
+ /*
+ * I2C temperature alias port
+ */
+ i2c20 = &i2c4_bus70_chn0;
+ i2c21 = &i2c4_bus70_chn1;
+ i2c22 = &i2c4_bus70_chn2;
+ i2c23 = &i2c4_bus70_chn3;
+
+ /*
+ * i2c bus 30-31 assigned to OCP slot 0-1
+ */
+ i2c30 = &ocpslot_0;
+ i2c31 = &ocpslot_1;
+
+ /*
+ * i2c bus 32-33 assigned to Riser slot 0-1
+ */
+ i2c32 = &i2c_riser0;
+ i2c33 = &i2c_riser1;
+
+ /*
+ * i2c bus 38-39 assigned to FRU on Riser slot 0-1
+ */
+ i2c38 = &i2c_riser0_chn_0;
+ i2c39 = &i2c_riser1_chn_0;
+
/*
* I2C NVMe alias port
*/
};
};
+ leds {
+ compatible = "gpio-leds";
+ /*
+ * Use gpio-leds to configure GPIOW5 (bmc-ready) pin to be reseted when
+ * watchdog timeout.
+ */
+ led-bmc-ready {
+ gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+ };
+
+ led-sw-heartbeat {
+ gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-identify {
+ gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-fault {
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-fan-fault {
+ gpios = <&gpio_expander1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-psu-fault {
+ gpios = <&gpio_expander1 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
voltage_mon_reg: voltage-mon-regulator {
compatible = "regulator-fixed";
regulator-name = "ltc2497_reg";
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
+
+ ocpslot_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ ocpslot_0_temp: temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+
+ ocpslot_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+
+ ocpslot_1_temp: temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+
+ i2c_riser0: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ i2c-mux-idle-disconnect;
+
+ i2c_riser0_chn_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ };
+ };
+ };
+
+ i2c_riser1: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ i2c-mux-idle-disconnect;
+
+ i2c_riser1_chn_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ };
+ };
+ };
};
};
};
};
+&i2c10 {
+ status = "okay";
+};
+
&i2c11 {
status = "okay";
ssif-bmc@10 {
};
};
+&i2c15 {
+ status = "okay";
+ gpio_expander1: gpio-expander@22 {
+ compatible = "nxp,pca9535";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "fan-fault","psu-fault",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","";
+ };
+};
+
&adc0 {
status = "okay";
status = "okay";
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&gpio {
pin_gpio_c7 {
gpio-hog;
compatible = "st,24c128", "atmel,24c128";
reg = <0x50>;
pagesize = <16>;
- #address-cells = <1>;
- #size-cells = <1>;
- eth0_macaddress: macaddress@3f80 {
- reg = <0x3f80 6>;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
};
};
status = "okay";
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&vhub {
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Catalina BMC";
+ compatible = "facebook,catalina-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ i2c16 = &i2c1mux0ch0;
+ i2c17 = &i2c1mux0ch1;
+ i2c18 = &i2c1mux0ch2;
+ i2c19 = &i2c1mux0ch3;
+ i2c20 = &i2c1mux0ch4;
+ i2c21 = &i2c1mux0ch5;
+ i2c22 = &i2c1mux0ch6;
+ i2c23 = &i2c1mux0ch7;
+ i2c24 = &i2c0mux0ch0;
+ i2c25 = &i2c0mux0ch1;
+ i2c26 = &i2c0mux0ch2;
+ i2c27 = &i2c0mux0ch3;
+ i2c28 = &i2c0mux1ch0;
+ i2c29 = &i2c0mux1ch1;
+ i2c30 = &i2c0mux1ch2;
+ i2c31 = &i2c0mux1ch3;
+ i2c32 = &i2c0mux2ch0;
+ i2c33 = &i2c0mux2ch1;
+ i2c34 = &i2c0mux2ch2;
+ i2c35 = &i2c0mux2ch3;
+ i2c36 = &i2c0mux3ch0;
+ i2c37 = &i2c0mux3ch1;
+ i2c38 = &i2c0mux3ch2;
+ i2c39 = &i2c0mux3ch3;
+ i2c40 = &i2c0mux4ch0;
+ i2c41 = &i2c0mux4ch1;
+ i2c42 = &i2c0mux4ch2;
+ i2c43 = &i2c0mux4ch3;
+ i2c44 = &i2c0mux5ch0;
+ i2c45 = &i2c0mux5ch1;
+ i2c46 = &i2c0mux5ch2;
+ i2c47 = &i2c0mux5ch3;
+ i2c48 = &i2c30mux0ch0;
+ i2c49 = &i2c30mux0ch1;
+ i2c50 = &i2c30mux0ch2;
+ i2c51 = &i2c30mux0ch3;
+ i2c52 = &i2c30mux0ch4;
+ i2c53 = &i2c30mux0ch5;
+ i2c54 = &i2c30mux0ch6;
+ i2c55 = &i2c30mux0ch7;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ spi1_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "bmc_ready_noled";
+ gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+
+ led-3 {
+ label = "bmc_ready_cpld_noled";
+ gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+ };
+
+ p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p2v5_bmc_aux";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi4_default>;
+ use-ncsi;
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux1ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux1ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 0 IOEXP
+ io_expander7: gpio@20 {
+ compatible = "nxp,pca9535";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux1ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c30mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c30mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c30mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c30mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ i2c30mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ i2c30mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ i2c30mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ // HDD FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+ i2c30mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ power-sensor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+ };
+ };
+ };
+ i2c0mux1ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@73 {
+ compatible = "nxp,pca9546";
+ reg = <0x73>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux2ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux2ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux2ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux2ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9546";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux3ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux3ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux3ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux3ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9546";
+ reg = <0x76>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux4ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux4ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 1 IOEXP
+ io_expander8: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux4ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux4ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux5ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux5ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux5ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux5ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <500>;
+ };
+ power-sensor@42 {
+ compatible = "ti,ina238";
+ reg = <0x42>;
+ shunt-resistor = <500>;
+ };
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <500>;
+ };
+ };
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ };
+ power-sensor@43 {
+ compatible = "ti,ina238";
+ reg = <0x43>;
+ };
+ };
+ i2c1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+ i2c1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ i2c1mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+
+ power-monitor@42 {
+ compatible = "lltc,ltc4287";
+ reg = <0x42>;
+ shunt-resistor-micro-ohms = <200>;
+ };
+ power-monitor@43 {
+ compatible = "lltc,ltc4287";
+ reg = <0x43>;
+ shunt-resistor-micro-ohms = <200>;
+ };
+ };
+ i2c1mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ // PDB FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ // PDB TEMP SENSOR
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+ };
+ i2c1mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+
+ // PDB IOEXP
+ io_expander5: gpio@27 {
+ compatible = "nxp,pca9554";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP IOEXP
+ io_expander6: gpio@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ i2c1mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+
+ // FIO FRU EEPROM
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+
+ // FIO TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ // Module 0 IOEXP
+ io_expander0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ // Module 1 IOEXP
+ io_expander1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ // HMC IOEXP
+ io_expander2: gpio@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ // Module 0 EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // Module 1 EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ // BMC IOEXP on Module 0
+ io_expander3: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc@6f {
+ compatible = "nuvoton,nct3018y";
+ reg = <0x6f>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+
+ // SCM CPLD IOEXP
+ io_expander4: gpio@4f {
+ compatible = "nxp,pca9555";
+ reg = <0x4f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // SCM TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ // SCM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // BSM FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ // OCP NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ // Module 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ // Module 0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // Left CBC FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ };
+
+ // Right CBC FRU EEPROM
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+ };
+
+ // HMC FRU EEPROM
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ // PDB CPLD IOEXP 0x10
+ io_expander9: gpio@10 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x11
+ io_expander10: gpio@11 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x12
+ io_expander11: gpio@12 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x13
+ io_expander12: gpio@13 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x14
+ io_expander13: gpio@14 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x14>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x15
+ io_expander14: gpio@15 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x15>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ // OCP NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&adc0 {
+ vref-supply = <&p1v8_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref-supply = <&p2v5_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+ pinctrl_ncsi3_default: ncsi3_default {
+ function = "RMII3";
+ groups = "NCSI3";
+ };
+
+ pinctrl_ncsi4_default: ncsi4_default {
+ function = "RMII4";
+ groups = "NCSI4";
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+ "BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+ "IOEXP_INT_L","FM_ID_LED",
+ "","",
+ /*C0-C7*/ "","","","",
+ "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+ "","BMC_I2C_SSIF_ALERT_L",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","",
+ "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+ /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN",
+ "SHDN_FORCE_L","SHDN_REQ_L",
+ "","","","",
+ /*I0-I7*/ "","","","",
+ "","FLASH_WP_STATUS",
+ "FM_PDB_HEALTH_N","RUN_POWER_PG",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP",
+ "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+ "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+ /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
+ "LED_POSTCODE_2","LED_POSTCODE_3",
+ "LED_POSTCODE_4","LED_POSTCODE_5",
+ "LED_POSTCODE_6","LED_POSTCODE_7",
+ /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+ "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+ "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+ "","USBDBG_IPMI_EN_L",
+ /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+ "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+ "host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N",
+ /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+ "UART_MUX_SEL","I2C_MUX_RESET_L",
+ "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+ "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+ /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+ "CPU_BOOT_DONE","PMBUS_GNT_L",
+ "CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+ "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+ /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+ "FM_BMC_DEBUG_SW_N","UID_LED_N",
+ "SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+ "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+ "SMB_BMC_TMP_ALERT","PWR_LED_N",
+ "SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","RST_BMC_SELF_HW",
+ "FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+ "","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&io_expander0 {
+ gpio-line-names =
+ "FPGA_THERM_OVERT_L","FPGA_READY_BMC",
+ "HMC_BMC_DETECT","HMC_PGOOD",
+ "","BMC_SELF_PWR_CYCLE",
+ "FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L",
+ "EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L",
+ "BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L",
+ "NCSI_CS1_SEL","SGPIO_EN_L",
+ "B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander1 {
+ gpio-line-names =
+ "SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC",
+ "","",
+ "","",
+ "SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L",
+ "SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L",
+ "SEC_BMC_EROT_FPGA_SPI_MUX_SEL","",
+ "","",
+ "","SEC_I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander2 {
+ gpio-line-names =
+ "HMC_PRSNT_L","HMC_READY",
+ "HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL",
+ "HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L",
+ "HMC_EROT_RST_L","GLOBAL_WP_HMC",
+ "FPGA_RST_L","USB2_HUB_RST",
+ "CPU_UART_MUX_SEL","",
+ "","","","";
+};
+
+&io_expander3 {
+ gpio-line-names =
+ "RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL",
+ "SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL",
+ "BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG",
+ "","","","";
+};
+
+&io_expander4 {
+ gpio-line-names =
+ "stby_power_en_cpld","stby_power_gd_cpld","","",
+ "","","","",
+ "","","","",
+ "","","","";
+};
+
+&io_expander5 {
+ gpio-line-names =
+ "JTAG_MUX_SEL","IOX_BMC_RESET","","",
+ "","","","";
+};
+
+&io_expander6 {
+ gpio-line-names =
+ "OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+ "OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+ "","","","",
+ "OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+ "OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+ "PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+ gpio-line-names =
+ "RST_CX7_0","RST_CX7_1",
+ "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+ "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+ "CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+ "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+ "FNP_L_CX0","FNP_L_CX1",
+ "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+ gpio-line-names =
+ "SEC_RST_CX7_0","SEC_RST_CX7_1",
+ "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+ "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+ "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+ "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+ "SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+ "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+ gpio-line-names =
+ "LEAK3_DETECT_R","LEAK1_DETECT_R",
+ "LEAK2_DETECT_R","LEAK0_DETECT_R",
+ "CHASSIS3_LEAK_Q_N_PLD","CHASSIS1_LEAK_Q_N_PLD",
+ "CHASSIS2_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+ "P12V_AUX_FAN_ALERT_PLD_N","P12V_AUX_FAN_OC_PLD_N",
+ "P12V_AUX_FAN_FAULT_PLD_N","LEAK_DETECT_RMC_N_R",
+ "RSVD_RMC_GPIO3_R","SMB_RJ45_FIO_TMP_ALERT",
+ "","";
+};
+
+&io_expander10 {
+ gpio-line-names =
+ "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+ "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+ "P12V_AUX_NIC1_SENSE_ALERT_R_N",
+ "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+ "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N",
+ "P12V_AUX_NIC0_SENSE_ALERT_R_N",
+ "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+ "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+ "P52V_SENSE_ALERT_PLD_N","P48V_HS2_FAULT_N_PLD",
+ "P48V_HS1_FAULT_N_PLD","";
+};
+
+&io_expander11 {
+ gpio-line-names =
+ "FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+ "FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+ "FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+ "FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+ "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+ "PRSNT_CHASSIS2_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N",
+ "PRSNT_RJ45_FIO_N_R","PRSNT_HDDBD_POWER_CABLE_N",
+ "PRSNT_OSFP_POWER_CABLE_N","";
+};
+
+&io_expander12 {
+ gpio-line-names =
+ "RST_OCP_V3_1_R_N","NIC0_PERST_N",
+ "OCP_SFF_PERST_FROM_HOST_ISO_PLD_N","OCP_SFF_MAIN_PWR_EN",
+ "FM_OCP_SFF_PWR_GOOD_PLD","OCP_SFF_AUX_PWR_PLD_EN_R",
+ "HP_LVC3_OCP_V3_1_PWRGD_PLD","HP_OCP_V3_1_HSC_PWRGD_PLD_R",
+ "RST_OCP_V3_2_R_N","NIC1_PERST_N",
+ "OCP_V3_2_PERST_FROM_HOST_ISO_PLD_N","OCP_V3_2_MAIN_PWR_EN",
+ "FM_OCP_V3_2_PWR_GOOD_PLD","OCP_V3_2_AUX_PWR_PLD_EN_R",
+ "HP_LVC3_OCP_V3_2_PWRGD_PLD","HP_OCP_V3_2_HSC_PWRGD_PLD_R";
+};
+
+&io_expander13 {
+ gpio-line-names =
+ "NODEA_NODEB_PWOK_PLD_ISO_R","PWR_EN_NICS",
+ "PWRGD_P12V_AUX_FAN_PLD","P12V_AUX_FAN_EN_PLD",
+ "PWRGD_P3V3_AUX_PLD","PWRGD_P12V_AUX_PLD_ISO_R",
+ "FM_MAIN_PWREN_FROM_RMC_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+ "PWRGD_RMC_R","PWRGD_P12V_AUX_FAN_PLD",
+ "P12V_AUX_FAN_EN_PLD","FM_SYS_THROTTLE_N",
+ "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+ "","";
+};
+
+&io_expander14 {
+ gpio-line-names =
+ "","","","","","","","",
+ "FM_BOARD_BMC_SKU_ID3","FM_BOARD_BMC_SKU_ID2",
+ "FM_BOARD_BMC_SKU_ID1","FM_BOARD_BMC_SKU_ID0",
+ "FAB_BMC_REV_ID2","FAB_BMC_REV_ID1",
+ "FAB_BMC_REV_ID0","";
+};
&i2c12 {
status = "okay";
temperature-sensor@4f {
- compatible = "lm75";
+ compatible = "national,lm75";
reg = <0x4f>;
};
};
i2c21 = &imux21;
i2c22 = &imux22;
i2c23 = &imux23;
- i2c24 = &imux24;
- i2c25 = &imux25;
- i2c26 = &imux26;
- i2c27 = &imux27;
i2c28 = &imux28;
i2c29 = &imux29;
i2c30 = &imux30;
};
};
- spi_gpio: spi-gpio {
+ spi_gpio: spi {
status = "okay";
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
- gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
- tpmdev@0 {
+ tpm@0 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii4_default>;
use-ncsi;
- mellanox,multi-host;
};
&rtc {
#address-cells = <1>;
#size-cells = <0>;
};
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
};
&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
};
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
};
&i2c3 {
reg = <0x49>;
};
- power-monitor@22 {
- compatible = "lltc,ltc4286";
- reg = <0x22>;
- adi,vrange-low-enable;
- shunt-resistor-micro-ohms = <500>;
+ power-monitor@44 {
+ compatible = "lltc,ltc4287";
+ reg = <0x44>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+
+ power-monitor@40 {
+ compatible = "infineon,xdp710";
+ reg = <0x40>;
};
};
&i2c9 {
status = "okay";
+ mctp-controller;
+ multi-master;
+
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
gpio@30 {
compatible = "nxp,pca9555";
reg = <0x30>;
"","","","";
};
- i2c-mux@71 {
- compatible = "nxp,pca9546";
- reg = <0x71>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- imux24: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- imux25: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
- imux26: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
- imux27: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
- };
// PTTV FRU
eeprom@52 {
compatible = "atmel,24c64";
&i2c11 {
status = "okay";
+
+ gpio@30 {
+ compatible = "nxp,pca9555";
+ reg = <0x30>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ gpio@31 {
+ compatible = "nxp,pca9555";
+ reg = <0x31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "","","","",
+ "","","presence-cmm","",
+ "","","","",
+ "","","","";
+ };
+
+ // Aegis FRU
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
};
&i2c12 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ power-monitor@61 {
+ compatible = "isil,isl69260";
+ reg = <0x61>;
+ };
+ power-monitor@62 {
+ compatible = "isil,isl69260";
+ reg = <0x62>;
+ };
+ power-monitor@63 {
+ compatible = "isil,isl69260";
+ reg = <0x63>;
+ };
+ power-monitor@64 {
+ compatible = "infineon,xdpe152c4";
+ reg = <0x64>;
+ };
+ power-monitor@66 {
+ compatible = "infineon,xdpe152c4";
+ reg = <0x66>;
+ };
+ power-monitor@68 {
+ compatible = "infineon,xdpe152c4";
+ reg = <0x68>;
+ };
};
imux29: i2c@1 {
#address-cells = <1>;
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "power-button","power-host-control",
"reset-button","","led-power","","","",
- /*Q0-Q7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","power-chassis-control","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","","","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","led-identify-gate","",
/*V0-V7*/ "","","","",
- "rtc-battery-voltage-read-enable","","","",
+ "rtc-battery-voltage-read-enable","",
+ "power-chassis-good","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
&sgpiom0 {
status = "okay";
- max-ngpios = <128>;
ngpios = <128>;
bus-frequency = <2000000>;
gpio-line-names =
compatible = "facebook,minerva-cmc", "aspeed,ast2600";
aliases {
- serial5 = &uart5;
+ serial4 = &uart5;
+ serial5 = &uart6;
/*
* PCA9548 (2-0077) provides 8 channels connecting to
* 6 pcs of FCB (Fan Controller Board).
i2c19 = &imux19;
i2c20 = &imux20;
i2c21 = &imux21;
+
+ spi1 = &spi_gpio;
};
chosen {
leds {
compatible = "gpio-leds";
- led-fan-fault {
- label = "led-fan-fault";
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "power_blue";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ label = "fan_status_led";
gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
+
+ led-4 {
+ label = "fan_fault_led_n";
+ gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ spi_gpio: spi {
+ status = "okay";
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
};
};
};
};
+&mdio3 {
+ status = "okay";
+};
+
&fmc {
status = "okay";
flash@0 {
};
};
-&rtc {
- status = "okay";
-};
-
&sgpiom0 {
status = "okay";
ngpios = <128>;
shunt-resistor = <1000>;
};
- power-monitor@67 {
- compatible = "adi,ltc2945";
- reg = <0x67>;
+ power-monitor@44 {
+ compatible = "lltc,ltc4287";
+ reg = <0x44>;
+ shunt-resistor-micro-ohms = <2000>;
};
- power-monitor@68 {
- compatible = "adi,ltc2945";
- reg = <0x68>;
+ power-monitor@43 {
+ compatible = "infineon,xdp710";
+ reg = <0x43>;
};
leds_gpio: gpio@19 {
reg = <0x4b>;
};
- temperature-sensor@48 {
+ temperature-sensor@4f {
compatible = "ti,tmp75";
- reg = <0x48>;
+ reg = <0x4f>;
};
eeprom@54 {
#address-cells = <1>;
#size-cells = <0>;
};
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
};
imux17: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
};
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
};
imux18: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
};
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
};
imux19: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
};
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
};
- imux20: i2c@4 {
+ imux20: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
#address-cells = <1>;
#size-cells = <0>;
};
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
};
- imux21: i2c@5 {
+ imux21: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
#address-cells = <1>;
#size-cells = <0>;
};
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
};
};
};
&i2c9 {
status = "okay";
-};
-&i2c10 {
- status = "okay";
-};
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
-&i2c11 {
- status = "okay";
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
};
&i2c12 {
compatible = "atmel,24c128";
reg = <0x50>;
};
+
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
};
&adc0 {
pinctrl-0 = <&pinctrl_adc10_default>;
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "","","","","","","","",
- /*Q0-Q7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","power-chassis-control","","",
/*R0-R7*/ "","","","","","","","",
- /*S0-S7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","","host0-ready",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
- /*V0-V7*/ "","","","","BAT_DETECT","","","",
+ /*V0-V7*/ "","","","","BAT_DETECT","","power-chassis-good","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","BLADE_UART_SEL3","","","","","",
/*Y0-Y7*/ "","","","","","","","",
gpio-line-names =
/*"input pin","output pin"*/
/*A0 - A7*/
- "PRSNT_MTIA_BLADE0_N","PWREN_MTIA_BLADE0_EN",
- "PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN",
- "PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN",
- "PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN",
- "PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN",
- "PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN",
- "PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN",
- "PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN",
+ "PRSNT_MTIA_BLADE0_N","PWREN_MTIA_BLADE0_EN_N",
+ "PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N",
+ "PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N",
+ "PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N",
+ "PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN_N",
+ "PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N",
+ "PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N",
+ "PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N",
/*B0 - B7*/
- "PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN",
- "PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN",
- "PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN",
- "PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN",
- "PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN",
- "PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN",
- "PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN",
- "PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN",
+ "PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N",
+ "PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N",
+ "PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N",
+ "PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N",
+ "PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN_N",
+ "PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N",
+ "PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N",
+ "PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N",
/*C0 - C7*/
- "PRSNT_NW_BLADE0_N","PWREN_NW_BLADE0_EN",
- "PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN",
- "PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN",
- "PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN",
- "PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN",
- "PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN",
- "PRSNT_FCB_TOP_0_N","PWREN_MTIA_BLADE0_HSC_EN",
- "PRSNT_FCB_TOP_1_N","PWREN_MTIA_BLADE1_HSC_EN",
+ "PRSNT_NW_BLADE0_N","PWREN_NW_BLADE0_EN_N",
+ "PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N",
+ "PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N",
+ "PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N",
+ "PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N",
+ "PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N",
+ "PRSNT_FCB_TOP_0_N","PWREN_MTIA_BLADE0_HSC_EN_N",
+ "PRSNT_FCB_TOP_1_N","PWREN_MTIA_BLADE1_HSC_EN_N",
/*D0 - D7*/
- "PRSNT_FCB_MIDDLE_0_N","PWREN_MTIA_BLADE2_HSC_EN",
- "PRSNT_FCB_MIDDLE_1_N","PWREN_MTIA_BLADE3_HSC_EN",
- "PRSNT_FCB_BOTTOM_0_N","PWREN_MTIA_BLADE4_HSC_EN",
- "PRSNT_FCB_BOTTOM_1_N","PWREN_MTIA_BLADE5_HSC_EN",
- "PWRGD_MTIA_BLADE0_PWROK_L_BUF","PWREN_MTIA_BLADE6_HSC_EN",
- "PWRGD_MTIA_BLADE1_PWROK_L_BUF","PWREN_MTIA_BLADE7_HSC_EN",
- "PWRGD_MTIA_BLADE2_PWROK_L_BUF","PWREN_MTIA_BLADE8_HSC_EN",
- "PWRGD_MTIA_BLADE3_PWROK_L_BUF","PWREN_MTIA_BLADE9_HSC_EN",
+ "PRSNT_FCB_MIDDLE_0_N","PWREN_MTIA_BLADE2_HSC_EN_N",
+ "PRSNT_FCB_MIDDLE_1_N","PWREN_MTIA_BLADE3_HSC_EN_N",
+ "PRSNT_FCB_BOTTOM_1_N","PWREN_MTIA_BLADE4_HSC_EN_N",
+ "PRSNT_FCB_BOTTOM_0_N","PWREN_MTIA_BLADE5_HSC_EN_N",
+ "PWRGD_MTIA_BLADE0_PWROK_N","PWREN_MTIA_BLADE6_HSC_EN_N",
+ "PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N",
+ "PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N",
+ "PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N",
/*E0 - E7*/
- "PWRGD_MTIA_BLADE4_PWROK_L_BUF","PWREN_MTIA_BLADE10_HSC_EN",
- "PWRGD_MTIA_BLADE5_PWROK_L_BUF","PWREN_MTIA_BLADE11_HSC_EN",
- "PWRGD_MTIA_BLADE6_PWROK_L_BUF","PWREN_MTIA_BLADE12_HSC_EN",
- "PWRGD_MTIA_BLADE7_PWROK_L_BUF","PWREN_MTIA_BLADE13_HSC_EN",
- "PWRGD_MTIA_BLADE8_PWROK_L_BUF","PWREN_MTIA_BLADE14_HSC_EN",
- "PWRGD_MTIA_BLADE9_PWROK_L_BUF","PWREN_MTIA_BLADE15_HSC_EN",
- "PWRGD_MTIA_BLADE10_PWROK_L_BUF","PWREN_NW_BLADE0_HSC_EN",
- "PWRGD_MTIA_BLADE11_PWROK_L_BUF","PWREN_NW_BLADE1_HSC_EN",
+ "PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N",
+ "PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N",
+ "PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N",
+ "PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N",
+ "PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N",
+ "PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N",
+ "PWRGD_MTIA_BLADE10_PWROK_N","PWREN_NW_BLADE0_HSC_EN_N",
+ "PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N",
/*F0 - F7*/
- "PWRGD_MTIA_BLADE12_PWROK_L_BUF","PWREN_NW_BLADE2_HSC_EN",
- "PWRGD_MTIA_BLADE13_PWROK_L_BUF","PWREN_NW_BLADE3_HSC_EN",
- "PWRGD_MTIA_BLADE14_PWROK_L_BUF","PWREN_NW_BLADE4_HSC_EN",
- "PWRGD_MTIA_BLADE15_PWROK_L_BUF","PWREN_NW_BLADE5_HSC_EN",
- "PWRGD_NW_BLADE0_PWROK_L_BUF","PWREN_FCB_TOP_L_EN",
- "PWRGD_NW_BLADE1_PWROK_L_BUF","PWREN_FCB_TOP_R_EN",
- "PWRGD_NW_BLADE2_PWROK_L_BUF","PWREN_FCB_MIDDLE_L_EN",
- "PWRGD_NW_BLADE3_PWROK_L_BUF","PWREN_FCB_MIDDLE_R_EN",
+ "PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N",
+ "PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N",
+ "PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N",
+ "PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N",
+ "PWRGD_NW_BLADE0_PWROK_N","PWREN_FCB_TOP_0_EN_N",
+ "PWRGD_NW_BLADE1_PWROK_N","PWREN_FCB_TOP_1_EN_N",
+ "PWRGD_NW_BLADE2_PWROK_N","PWREN_FCB_MIDDLE_0_EN_N",
+ "PWRGD_NW_BLADE3_PWROK_N","PWREN_FCB_MIDDLE_1_EN_N",
/*G0 - G7*/
- "PWRGD_NW_BLADE4_PWROK_L_BUF","PWREN_FCB_BOTTOM_L_EN",
- "PWRGD_NW_BLADE5_PWROK_L_BUF","PWREN_FCB_BOTTOM_R_EN",
- "PWRGD_FCB_TOP_0_PWROK_L_BUF","FM_CMM_AC_CYCLE_N",
- "PWRGD_FCB_TOP_1_PWROK_L_BUF","MGMT_SFP_TX_DIS",
- "PWRGD_FCB_MIDDLE_0_PWROK_L_BUF","",
- "PWRGD_FCB_MIDDLE_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE0_1_N",
- "PWRGD_FCB_BOTTOM_0_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE2_3_N",
- "PWRGD_FCB_BOTTOM_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE4_5_N",
+ "PWRGD_NW_BLADE4_PWROK_N","PWREN_FCB_BOTTOM_1_EN_N",
+ "PWRGD_NW_BLADE5_PWROK_N","PWREN_FCB_BOTTOM_0_EN_N",
+ "PWRGD_FCB_TOP_0_PWROK_N","FM_CMM_AC_CYCLE_N",
+ "PWRGD_FCB_TOP_1_PWROK_N","MGMT_SFP_TX_DIS",
+ "PWRGD_FCB_MIDDLE_0_PWROK_N","FM_MDIO_SW_SEL",
+ "PWRGD_FCB_MIDDLE_1_PWROK_N","FM_P24V_SMPWR_EN",
+ "PWRGD_FCB_BOTTOM_1_PWROK_N","",
+ "PWRGD_FCB_BOTTOM_0_PWROK_N","",
/*H0 - H7*/
- "LEAK_DETECT_MTIA_BLADE0_N_BUF","RST_I2CRST_MTIA_BLADE6_7_N",
- "LEAK_DETECT_MTIA_BLADE1_N_BUF","RST_I2CRST_MTIA_BLADE8_9_N",
- "LEAK_DETECT_MTIA_BLADE2_N_BUF","RST_I2CRST_MTIA_BLADE10_11_N",
- "LEAK_DETECT_MTIA_BLADE3_N_BUF","RST_I2CRST_MTIA_BLADE12_13_N",
- "LEAK_DETECT_MTIA_BLADE4_N_BUF","RST_I2CRST_MTIA_BLADE14_15_N",
- "LEAK_DETECT_MTIA_BLADE5_N_BUF","RST_I2CRST_NW_BLADE0_1_2_N",
- "LEAK_DETECT_MTIA_BLADE6_N_BUF","RST_I2CRST_NW_BLADE3_4_5_N",
- "LEAK_DETECT_MTIA_BLADE7_N_BUF","RST_I2CRST_FCB_N",
+ "LEAK_DETECT_MTIA_BLADE0_N","",
+ "LEAK_DETECT_MTIA_BLADE1_N","",
+ "LEAK_DETECT_MTIA_BLADE2_N","",
+ "LEAK_DETECT_MTIA_BLADE3_N","",
+ "LEAK_DETECT_MTIA_BLADE4_N","",
+ "LEAK_DETECT_MTIA_BLADE5_N","",
+ "LEAK_DETECT_MTIA_BLADE6_N","",
+ "LEAK_DETECT_MTIA_BLADE7_N","",
/*I0 - I7*/
- "LEAK_DETECT_MTIA_BLADE8_N_BUF","RST_I2CRST_FCB_B_L_N",
- "LEAK_DETECT_MTIA_BLADE9_N_BUF","RST_I2CRST_FCB_B_R_N",
- "LEAK_DETECT_MTIA_BLADE10_N_BUF","RST_I2CRST_FCB_M_L_N",
- "LEAK_DETECT_MTIA_BLADE11_N_BUF","RST_I2CRST_FCB_M_R_N",
- "LEAK_DETECT_MTIA_BLADE12_N_BUF","RST_I2CRST_FCB_T_L_N",
- "LEAK_DETECT_MTIA_BLADE13_N_BUF","RST_I2CRST_FCB_T_R_N",
- "LEAK_DETECT_MTIA_BLADE14_N_BUF","BMC_READY",
- "LEAK_DETECT_MTIA_BLADE15_N_BUF","wFM_88E6393X_BIN_UPDATE_EN_N",
+ "LEAK_DETECT_MTIA_BLADE8_N","RST_I2CRST_FCB_BOTTOM_1_N",
+ "LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_BOTTOM_0_N",
+ "LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_MIDDLE_0_N",
+ "LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_MIDDLE_1_N",
+ "LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_TOP_0_N",
+ "LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_TOP_1_N",
+ "LEAK_DETECT_MTIA_BLADE14_N","BMC_READY",
+ "LEAK_DETECT_MTIA_BLADE15_N","FM_88E6393X_BIN_UPDATE_EN_N",
/*J0 - J7*/
- "LEAK_DETECT_NW_BLADE0_N_BUF","WATER_VALVE_CLOSED_N",
- "LEAK_DETECT_NW_BLADE1_N_BUF","",
- "LEAK_DETECT_NW_BLADE2_N_BUF","",
- "LEAK_DETECT_NW_BLADE3_N_BUF","",
- "LEAK_DETECT_NW_BLADE4_N_BUF","",
- "LEAK_DETECT_NW_BLADE5_N_BUF","",
- "MTIA_BLADE0_STATUS_LED","",
- "MTIA_BLADE1_STATUS_LED","",
+ "LEAK_DETECT_NW_BLADE0_N","WATER_VALVE_CLOSED_N",
+ "LEAK_DETECT_NW_BLADE1_N","",
+ "LEAK_DETECT_NW_BLADE2_N","",
+ "LEAK_DETECT_NW_BLADE3_N","",
+ "LEAK_DETECT_NW_BLADE4_N","",
+ "LEAK_DETECT_NW_BLADE5_N","",
+ "PWRGD_MTIA_BLADE0_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE1_HSC_PWROK_N","",
/*K0 - K7*/
- "MTIA_BLADE2_STATUS_LED","",
- "MTIA_BLADE3_STATUS_LED","",
- "MTIA_BLADE4_STATUS_LED","",
- "MTIA_BLADE5_STATUS_LED","",
- "MTIA_BLADE6_STATUS_LED","",
- "MTIA_BLADE7_STATUS_LED","",
- "MTIA_BLADE8_STATUS_LED","",
- "MTIA_BLADE9_STATUS_LED","",
+ "PWRGD_MTIA_BLADE2_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE3_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE4_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE5_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE6_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE7_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE8_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE9_HSC_PWROK_N","",
/*L0 - L7*/
- "MTIA_BLADE10_STATUS_LED","",
- "MTIA_BLADE11_STATUS_LED","",
- "MTIA_BLADE12_STATUS_LED","",
- "MTIA_BLADE13_STATUS_LED","",
- "MTIA_BLADE14_STATUS_LED","",
- "MTIA_BLADE15_STATUS_LED","",
- "NW_BLADE0_STATUS_LED","",
- "NW_BLADE1_STATUS_LED","",
+ "PWRGD_MTIA_BLADE10_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE11_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE12_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE13_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE14_HSC_PWROK_N","",
+ "PWRGD_MTIA_BLADE15_HSC_PWROK_N","",
+ "PWRGD_NW_BLADE0_HSC_PWROK_N","",
+ "PWRGD_NW_BLADE1_HSC_PWROK_N","",
/*M0 - M7*/
- "NW_BLADE2_STATUS_LED","",
- "NW_BLADE3_STATUS_LED","",
- "NW_BLADE4_STATUS_LED","",
- "NW_BLADE5_STATUS_LED","",
+ "PWRGD_NW_BLADE2_HSC_PWROK_N","",
+ "PWRGD_NW_BLADE3_HSC_PWROK_N","",
+ "PWRGD_NW_BLADE4_HSC_PWROK_N","",
+ "PWRGD_NW_BLADE5_HSC_PWROK_N","",
"RPU_READY","",
"IT_GEAR_RPU_LINK_N","",
"IT_GEAR_LEAK","",
/*N0 - N7*/
"VALVE_STS0","",
"VALVE_STS1","",
- "VALVE_STS2","",
- "VALVE_STS3","",
- "CR_TOGGLE_BOOT_BUF_N","",
- "CMM_LC_RDY_LED_N","",
- "CMM_LC_UNRDY_LED_N","",
+ "PCA9555_IRQ0_N","",
+ "PCA9555_IRQ1_N","",
+ "CR_TOGGLE_BOOT_N","",
+ "IRQ_FCB_TOP0_N","",
+ "IRQ_FCB_TOP1_N","",
"CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","",
/*O0 - O7*/
"CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","",
"BOT_BCB_CABLE_PRSNT_N","",
"TOP_BCB_CABLE_PRSNT_N","",
- "CHASSIS0_LEAK_Q_N","",
- "CHASSIS1_LEAK_Q_N","",
- "LEAK0_DETECT","",
- "LEAK1_DETECT","",
- "MGMT_SFP_PRSNT_N","",
+ "IRQ_FCB_MID0_N","",
+ "IRQ_FCB_MID1_N","",
+ "CHASSIS_LEAK0_DETECT_N","",
+ "CHASSIS_LEAK1_DETECT_N","",
+ "VALVE_RMON_A_1","",
/*P0 - P7*/
- "MGMT_SFP_TX_FAULT","",
- "MGMT_SFP_RX_LOS","",
- "","",
- "","",
- "","",
- "","",
- "","",
- "","";
+ "VALVE_RMON_A_2","",
+ "VALVE_RMON_B_1","",
+ "VALVE_RMON_B_2","",
+ "RPU_READY_SPARE","",
+ "IT_GEAR_LEAK_SPARE","",
+ "IT_GEAR_RPU_LINK_SPARE_N","",
+ "IRQ_FCB_BOT0_N","",
+ "IRQ_FCB_BOT0_N","";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-blueridge.dts"
+
+/ {
+ model = "Blueridge 4U";
+};
+
+&i2c3 {
+ power-supply@6a {
+ compatible = "ibm,cffps";
+ reg = <0x6a>;
+ };
+
+ power-supply@6b {
+ compatible = "ibm,cffps";
+ reg = <0x6b>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+ model = "Blueridge 2U";
+ compatible = "ibm,blueridge-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ i2c16 = &i2c2mux0;
+ i2c17 = &i2c2mux1;
+ i2c18 = &i2c2mux2;
+ i2c19 = &i2c2mux3;
+ i2c20 = &i2c4mux0chn0;
+ i2c21 = &i2c4mux0chn1;
+ i2c22 = &i2c4mux0chn2;
+ i2c23 = &i2c5mux0chn0;
+ i2c24 = &i2c5mux0chn1;
+ i2c25 = &i2c6mux0chn0;
+ i2c26 = &i2c6mux0chn1;
+ i2c27 = &i2c6mux0chn2;
+ i2c28 = &i2c6mux0chn3;
+ i2c29 = &i2c11mux0chn0;
+ i2c30 = &i2c11mux0chn1;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ event_log: region@b3d00000 {
+ reg = <0xb3d00000 0x100000>;
+ no-map;
+ };
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region@b4000000 {
+ reg = <0xb4000000 0x04000000>; /* 64M */
+ no-map;
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region@bf000000 {
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ no-map;
+ };
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c2>;
+ idle-state = <0>;
+ mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+ <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+
+ i2c2mux0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2mux1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2mux2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2mux3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* BMC Card fault LED at the back */
+ led-bmc-ingraham0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure ID LED at the back */
+ led-rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure fault LED at the back */
+ led-rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ /* PCIE slot power LED */
+ led-pcieslot-power {
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ event-fan0-presence {
+ gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+ label = "fan0-presence";
+ linux,code = <6>;
+ };
+
+ event-fan1-presence {
+ gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+ label = "fan1-presence";
+ linux,code = <7>;
+ };
+
+ event-fan2-presence {
+ gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+ label = "fan2-presence";
+ linux,code = <8>;
+ };
+
+ event-fan3-presence {
+ gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+ label = "fan3-presence";
+ linux,code = <9>;
+ };
+
+ event-fan4-presence {
+ gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+ label = "fan4-presence";
+ linux,code = <10>;
+ };
+
+ event-fan5-presence {
+ gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+ label = "fan5-presence";
+ linux,code = <11>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 7>;
+ };
+};
+
+&adc1 {
+ status = "okay";
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "bmc-management-ready","","","","","","checkstop","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+ "factory-reset-toggle","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
+ /*I0-I7*/ "","","","","","","bmc-secure-boot","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","usb-power","","","","",
+ /*P0-P7*/ "","","","","pcieslot-power","","","",
+ /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
+ /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","",
+ "",
+ /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+ "power-ffs-sync-history","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+
+ i2c3-mux-oe-n-hog {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+ line-name = "I2C3_MUX_OE_N";
+ output-high;
+ };
+
+ usb-power-hog {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+ clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ gpio@20 {
+ compatible = "ti,tca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "",
+ "RUSSEL_FW_I2C_ENABLE_N",
+ "RUSSEL_OPPANEL_PRESENCE_N",
+ "BLYTH_OPPANEL_PRESENCE_N",
+ "CPU_TPM_CARD_PRESENT_N",
+ "DASD_BP2_PRESENT_N",
+ "DASD_BP1_PRESENT_N",
+ "DASD_BP0_PRESENT_N";
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ power-supply@68 {
+ compatible = "ibm,cffps";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps";
+ reg = <0x69>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+ "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+ "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+ "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+ "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+ "", "", "", "", "", "";
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c4mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard0-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard0-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c4mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+
+ i2c4mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard3-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard3-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard4-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard4-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp275";
+ reg = <0x4b>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c6mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c6mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+
+ i2c6mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c6mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c7 {
+ multi-master;
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "ibm,pca9552";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "pcieslot0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "pcieslot1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "pcieslot2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "pcieslot3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "pcieslot4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "cpu1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "cpu-vrm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "lcd-russel";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@31 {
+ compatible = "ibm,pca9552";
+ reg = <0x31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@32 {
+ compatible = "ibm,pca9552";
+ reg = <0x32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm16";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm17";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm18";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm20";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm21";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm22";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm23";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm24";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm25";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm26";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm27";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm28";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm29";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm30";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm31";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@33 {
+ compatible = "ibm,pca9552";
+ reg = <0x33>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "planar";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cpu0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "dasd-pyramid0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "dasd-pyramid1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "dasd-pyramid2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "cpu0-vrm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "rtc-battery";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "base-blyth";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "pcieslot6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "pcieslot7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "pcieslot8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "pcieslot9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "pcieslot10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "pcieslot11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "tpm-wilson";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ humidity-sensor@40 {
+ compatible = "silabs,si7020";
+ reg = <0x40>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ pwm@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "front-sys-id0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "front-check-log0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "front-enc-fault1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "front-sys-pwron0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca0: led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "fan0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "fan1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "fan2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "fan3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "fan4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "fan5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ lcd-controller@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ pressure-sensor@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pmic@11 {
+ compatible = "ti,ucd90320";
+ reg = <0x11>;
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "power-config-full-load", "";
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+ "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+ "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+ "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+ "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+ "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+ "", "", "", "";
+ };
+
+};
+
+&i2c9 {
+ status = "okay";
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ temperature-sensor@4d {
+ compatible = "ti,tmp423";
+ reg = <0x4d>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ temperature-sensor@4d {
+ compatible = "ti,tmp423";
+ reg = <0x4d>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c11mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard10-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard10-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c11mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ tpm@2e {
+ compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ memory-region = <&event_log>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme16";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme17";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme18";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme20";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme21";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme22";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme23";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
status = "okay";
};
-&xdma {
- status = "okay";
- memory-region = <&vga_memory>;
-};
-
&kcs2 {
status = "okay";
aspeed,lpc-io-reg = <0xca8 0xcac>;
status = "okay";
};
-&xdma {
- status = "okay";
- memory-region = <&vga_memory>;
-};
-
&kcs2 {
status = "okay";
aspeed,lpc-io-reg = <0xca8 0xcac>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+ model = "Fuji";
+ compatible = "ibm,fuji-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c500 = &cfam4_i2c0;
+ i2c501 = &cfam4_i2c1;
+ i2c510 = &cfam4_i2c10;
+ i2c511 = &cfam4_i2c11;
+ i2c512 = &cfam4_i2c12;
+ i2c513 = &cfam4_i2c13;
+ i2c514 = &cfam4_i2c14;
+ i2c515 = &cfam4_i2c15;
+ i2c602 = &cfam5_i2c2;
+ i2c603 = &cfam5_i2c3;
+ i2c610 = &cfam5_i2c10;
+ i2c611 = &cfam5_i2c11;
+ i2c614 = &cfam5_i2c14;
+ i2c615 = &cfam5_i2c15;
+ i2c616 = &cfam5_i2c16;
+ i2c617 = &cfam5_i2c17;
+ i2c700 = &cfam6_i2c0;
+ i2c701 = &cfam6_i2c1;
+ i2c710 = &cfam6_i2c10;
+ i2c711 = &cfam6_i2c11;
+ i2c712 = &cfam6_i2c12;
+ i2c713 = &cfam6_i2c13;
+ i2c714 = &cfam6_i2c14;
+ i2c715 = &cfam6_i2c15;
+ i2c802 = &cfam7_i2c2;
+ i2c803 = &cfam7_i2c3;
+ i2c810 = &cfam7_i2c10;
+ i2c811 = &cfam7_i2c11;
+ i2c814 = &cfam7_i2c14;
+ i2c815 = &cfam7_i2c15;
+ i2c816 = &cfam7_i2c16;
+ i2c817 = &cfam7_i2c17;
+
+ i2c16 = &i2c4mux0chn0;
+ i2c17 = &i2c4mux0chn1;
+ i2c18 = &i2c4mux0chn2;
+ i2c19 = &i2c5mux0chn0;
+ i2c20 = &i2c5mux0chn1;
+ i2c21 = &i2c5mux0chn2;
+ i2c22 = &i2c5mux0chn3;
+ i2c23 = &i2c6mux0chn0;
+ i2c24 = &i2c6mux0chn1;
+ i2c25 = &i2c6mux0chn2;
+ i2c26 = &i2c6mux0chn3;
+ i2c27 = &i2c14mux0chn0;
+ i2c28 = &i2c14mux0chn1;
+ i2c29 = &i2c14mux0chn2;
+ i2c30 = &i2c14mux0chn3;
+ i2c31 = &i2c14mux1chn0;
+ i2c32 = &i2c14mux1chn1;
+ i2c33 = &i2c14mux1chn2;
+ i2c34 = &i2c14mux1chn3;
+ i2c35 = &i2c15mux0chn0;
+ i2c36 = &i2c15mux0chn1;
+ i2c37 = &i2c15mux0chn2;
+ i2c38 = &i2c15mux0chn3;
+ i2c39 = &i2c15mux1chn0;
+ i2c40 = &i2c15mux1chn1;
+ i2c41 = &i2c15mux1chn2;
+ i2c42 = &i2c15mux1chn3;
+ i2c43 = &i2c15mux2chn0;
+ i2c44 = &i2c15mux2chn1;
+ i2c45 = &i2c15mux2chn2;
+ i2c46 = &i2c15mux2chn3;
+ i2c47 = &i2c8mux0chn0;
+ i2c48 = &i2c8mux0chn1;
+
+ serial4 = &uart5;
+
+ sbefifo500 = &sbefifo500;
+ sbefifo501 = &sbefifo501;
+ sbefifo510 = &sbefifo510;
+ sbefifo511 = &sbefifo511;
+ sbefifo512 = &sbefifo512;
+ sbefifo513 = &sbefifo513;
+ sbefifo514 = &sbefifo514;
+ sbefifo515 = &sbefifo515;
+ sbefifo602 = &sbefifo602;
+ sbefifo603 = &sbefifo603;
+ sbefifo610 = &sbefifo610;
+ sbefifo611 = &sbefifo611;
+ sbefifo614 = &sbefifo614;
+ sbefifo615 = &sbefifo615;
+ sbefifo616 = &sbefifo616;
+ sbefifo617 = &sbefifo617;
+ sbefifo700 = &sbefifo700;
+ sbefifo701 = &sbefifo701;
+ sbefifo710 = &sbefifo710;
+ sbefifo711 = &sbefifo711;
+ sbefifo712 = &sbefifo712;
+ sbefifo713 = &sbefifo713;
+ sbefifo714 = &sbefifo714;
+ sbefifo715 = &sbefifo715;
+ sbefifo802 = &sbefifo802;
+ sbefifo803 = &sbefifo803;
+ sbefifo810 = &sbefifo810;
+ sbefifo811 = &sbefifo811;
+ sbefifo814 = &sbefifo814;
+ sbefifo815 = &sbefifo815;
+ sbefifo816 = &sbefifo816;
+ sbefifo817 = &sbefifo817;
+
+ scom500 = &scom500;
+ scom501 = &scom501;
+ scom510 = &scom510;
+ scom511 = &scom511;
+ scom512 = &scom512;
+ scom513 = &scom513;
+ scom514 = &scom514;
+ scom515 = &scom515;
+ scom602 = &scom602;
+ scom603 = &scom603;
+ scom610 = &scom610;
+ scom611 = &scom611;
+ scom614 = &scom614;
+ scom615 = &scom615;
+ scom616 = &scom616;
+ scom617 = &scom617;
+ scom700 = &scom700;
+ scom701 = &scom701;
+ scom710 = &scom710;
+ scom711 = &scom711;
+ scom712 = &scom712;
+ scom713 = &scom713;
+ scom714 = &scom714;
+ scom715 = &scom715;
+ scom802 = &scom802;
+ scom803 = &scom803;
+ scom810 = &scom810;
+ scom811 = &scom811;
+ scom814 = &scom814;
+ scom815 = &scom815;
+ scom816 = &scom816;
+ scom817 = &scom817;
+
+ spi50 = &cfam4_spi0;
+ spi51 = &cfam4_spi1;
+ spi52 = &cfam4_spi2;
+ spi53 = &cfam4_spi3;
+ spi60 = &cfam5_spi0;
+ spi61 = &cfam5_spi1;
+ spi62 = &cfam5_spi2;
+ spi63 = &cfam5_spi3;
+ spi70 = &cfam6_spi0;
+ spi71 = &cfam6_spi1;
+ spi72 = &cfam6_spi2;
+ spi73 = &cfam6_spi3;
+ spi80 = &cfam7_spi0;
+ spi81 = &cfam7_spi1;
+ spi82 = &cfam7_spi2;
+ spi83 = &cfam7_spi3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ event_log: region@b3d00000 {
+ reg = <0xb3d00000 0x100000>;
+ no-map;
+ };
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region@b4000000 {
+ reg = <0xb4000000 0x04000000>; /* 64M */
+ no-map;
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region@bf000000 {
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ no-map;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ event-fan0-presence {
+ gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+ label = "fan0-presence";
+ linux,code = <15>;
+ };
+
+ event-fan1-presence {
+ gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+ label = "fan1-presence";
+ linux,code = <14>;
+ };
+
+ event-fan2-presence {
+ gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+ label = "fan2-presence";
+ linux,code = <13>;
+ };
+
+ event-fan3-presence {
+ gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+ label = "fan3-presence";
+ linux,code = <12>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* RTC battery fault LED at the back */
+ led-rtc-battery {
+ gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ /* BMC Card fault LED at the back */
+ led-bmc {
+ gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure Identify LED at the back */
+ led-rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure fault LED at the back */
+ led-rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ /* PCIE slot power LED */
+ led-pcieslot-power {
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 7>;
+ };
+};
+
+&adc1 {
+ status = "okay";
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "bmc-management-ready","","","","","","checkstop","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+ "factory-reset-toggle","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","",
+ "","",
+ /*I0-I7*/ "","","","","","","bmc-secure-boot","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","usb-power","","","","",
+ /*P0-P7*/ "","","","","led-pcieslot-power","","","",
+ /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","",
+ /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+ "I2C_FLASH_MICRO_N","","",
+ /*S0-S7*/ "","","","","power-ffs-sync-history","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","BMC_3RESTART_ATTEMPT_P","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+
+ usb-power-hog {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9552";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "presence-ps0",
+ "presence-ps1",
+ "presence-ps2",
+ "presence-ps3",
+ "presence-pdb",
+ "presence-tpm",
+ "", "",
+ "presence-cp0",
+ "presence-cp1",
+ "presence-cp2",
+ "presence-cp3",
+ "presence-dasd",
+ "presence-lcd-op",
+ "presence-base-op",
+ "";
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+
+ power-supply@68 {
+ compatible = "ibm,cffps";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps";
+ reg = <0x69>;
+ };
+
+ power-supply@6b {
+ compatible = "ibm,cffps";
+ reg = <0x6b>;
+ };
+
+ power-supply@6d {
+ compatible = "ibm,cffps";
+ reg = <0x6d>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ led-controller@65 {
+ compatible = "nxp,pca9552";
+ reg = <0x65>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "presence-cable-card1",
+ "presence-cable-card2",
+ "presence-cable-card3",
+ "presence-cable-card4",
+ "presence-cable-card5",
+ "expander-cable-card1",
+ "expander-cable-card2",
+ "expander-cable-card3",
+ "expander-cable-card4",
+ "expander-cable-card5";
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c4mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c01-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c01-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c4mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c02-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c02-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c4mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c03-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c03-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ led-controller@66 {
+ compatible = "nxp,pca9552";
+ reg = <0x66>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "presence-cable-card6",
+ "presence-cable-card7",
+ "presence-cable-card8",
+ "presence-cable-card9",
+ "presence-cable-card10",
+ "presence-cable-card11",
+ "expander-cable-card6",
+ "expander-cable-card7",
+ "expander-cable-card8",
+ "expander-cable-card9",
+ "expander-cable-card10",
+ "expander-cable-card11";
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c04-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c04-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c05-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c05-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c06-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c06-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+
+ led-controller@63 {
+ compatible = "nxp,pca9551";
+ reg = <0x63>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c07-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c07-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c6mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c08-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c08-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c6mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c09-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c09-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c6mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+
+ led-controller@63 {
+ compatible = "nxp,pca9551";
+ reg = <0x63>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c10-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c10-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c6mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c11-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c11-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+
+ led-controller@65 {
+ compatible = "nxp,pca9552";
+ reg = <0x65>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "pcieslot-c01";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "pcieslot-c02";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "pcieslot-c03";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "pcieslot-c04";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "pcieslot-c05";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "pcieslot-c06";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "pcieslot-c07";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "pcieslot-c08";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "pcieslot-c09";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "pcieslot-c10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "pcieslot-c11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ led-controller@31 {
+ compatible = "ibm,pca9552";
+ reg = <0x31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@32 {
+ compatible = "ibm,pca9552";
+ reg = <0x32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm16";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm17";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm18";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm20";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm21";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm22";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm23";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm24";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm25";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm26";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm27";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm28";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm29";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm30";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm31";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@33 {
+ compatible = "ibm,pca9552";
+ reg = <0x33>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm32";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm33";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm34";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm35";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm36";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm37";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm38";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm39";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm40";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm41";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm42";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm43";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm44";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm45";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm46";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm47";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@30 {
+ compatible = "ibm,pca9552";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm48";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm49";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm50";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm51";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm52";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm53";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm54";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm55";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm56";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm57";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm58";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm59";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm60";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm61";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm62";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm63";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@34 {
+ compatible = "ibm,pca9552";
+ reg = <0x34>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "planar";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "tpm";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "cpu3-c61";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "cpu0-c14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "opencapi-connector3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "opencapi-connector4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "opencapi-connector5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "vrm4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "vrm5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "vrm6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "vrm7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "vrm12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "vrm13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "vrm14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "vrm15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@35 {
+ compatible = "ibm,pca9552";
+ reg = <0x35>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "dasd-backplane";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "power-distribution";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "cpu1-c19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "cpu2-c56";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "opencapi-connector0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "opencapi-connector1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "opencapi-connector2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "vrm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "vrm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "vrm2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "vrm3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "vrm8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "vrm9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "vrm10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "vrm11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pmic@11 {
+ compatible = "ti,ucd90320";
+ reg = <0x11>;
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+ reset-gpio = <&gpio0 ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+
+ i2c8mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c8mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ tpm@2e {
+ compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ memory-region = <&event_log>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c14 {
+ multi-master;
+ status = "okay";
+
+ lcd-controller@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ idle-state = <1>;
+
+ i2c14mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ };
+ };
+
+ i2c14mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "front-sys-id0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "front-check-log0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "front-enc-fault1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "front-sys-pwron0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c14mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwm@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "nvme8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "nvme9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "fan0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "fan1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "fan2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "fan3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca0: led-controller@61 {
+ compatible = "nxp,pca9552";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x61>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "","","","",
+ "","","","",
+ "","","","",
+ "presence-fan3",
+ "presence-fan2",
+ "presence-fan1",
+ "presence-fan0";
+ };
+ };
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c14mux1chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux1chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux1chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux1chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux1chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux2chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux2chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux2chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c15mux2chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+ clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&fsi_hub0 {
+ cfam@4,0 { /* DCM2_C0 */
+ reg = <4 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <4>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam4_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom500: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo500: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom501: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo501: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom510: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo510: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom511: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo511: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom512: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo512: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom513: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo513: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom514: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo514: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom515: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo515: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam4_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam4_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam4_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam4_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@5,0 { /* DCM2_C1 */
+ reg = <5 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <5>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam5_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom602: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo602: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom603: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo603: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom610: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo610: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom611: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo611: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom614: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo614: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom615: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo615: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom616: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo616: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom617: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo617: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam5_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam5_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam5_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam5_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@6,0 { /* DCM3_C0 */
+ reg = <6 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <6>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam6_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom700: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo700: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom701: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo701: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom710: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo710: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom711: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo711: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom712: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo712: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom713: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo713: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom714: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo714: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom715: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo715: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam6_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam6_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam6_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam6_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@7,0 { /* DCM3_C1 */
+ reg = <7 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <7>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam7_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom802: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo802: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom803: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo803: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom810: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo810: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom811: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo811: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom814: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo814: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom815: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo815: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom816: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo816: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom817: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo817: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam7_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam7_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam7_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam7_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+};
status = "okay";
};
-&xdma {
- status = "okay";
- memory-region = <&vga_memory>;
-};
-
&kcs2 {
status = "okay";
aspeed,lpc-io-reg = <0xca8 0xcac>;
reg = <6>;
temperature-sensor@4c {
- compatible = "ti,tmp423";
+ compatible = "ti,tmp432";
reg = <0x4c>;
};
};
reg = <6>;
temperature-sensor@4c {
- compatible = "ti,tmp423";
+ compatible = "ti,tmp432";
reg = <0x4c>;
};
};
};
temperature-sensor@4c {
- compatible = "ti,tmp423";
+ compatible = "ti,tmp432";
reg = <0x4c>;
};
};
memory-region = <&gfx_memory>;
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&wdt1 {
aspeed,reset-type = "none";
aspeed,external-signal;
status = "okay";
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
status = "okay";
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
status = "okay";
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&gpio {
pin_gpio_b0 {
gpio-hog;
memory-region = <&gfx_memory>;
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&ibt {
status = "okay";
};
memory-region = <&gfx_memory>;
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
memory-region = <&gfx_memory>;
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&wdt1 {
aspeed,reset-type = "none";
aspeed,external-signal;
<&pinctrl_lsirq_default>;
};
-&xdma {
- status = "okay";
- memory-region = <&vga_memory>;
-};
-
&kcs2 {
status = "okay";
aspeed,lpc-io-reg = <0xca8 0xcac>;
memory-region = <&gfx_memory>;
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&wdt1 {
aspeed,reset-type = "none";
aspeed,external-signal;
memory-region = <&video_engine_memory>;
};
-&xdma {
- status = "okay";
- memory-region = <&vga_memory>;
-};
-
#include "ibm-power9-dual.dtsi"
};
&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-
pinctrl_gpioh_unbiased: gpioi_unbiased {
pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
bias-disable;
status = "okay";
};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
reg = <0x1e6c0080 0x80>;
};
- cvic: copro-interrupt-controller@1e6c2000 {
- compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
+ cvic: interrupt-controller@1e6c2000 {
+ compatible = "aspeed,ast2400-cvic", "aspeed,cvic";
valid-sources = <0x7fffffff>;
reg = <0x1e6c2000 0x80>;
};
sram: sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x8000>; // 32K
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
video: video@1e700000 {
reg = <0x1e6c0080 0x80>;
};
- cvic: copro-interrupt-controller@1e6c2000 {
- compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
+ cvic: interrupt-controller@1e6c2000 {
+ compatible = "aspeed,ast2500-cvic", "aspeed,cvic";
valid-sources = <0xffffffff>;
copro-sw-interrupts = <1>;
reg = <0x1e6c2000 0x80>;
interrupts = <0x19>;
};
- xdma: xdma@1e6e7000 {
- compatible = "aspeed,ast2500-xdma";
- reg = <0x1e6e7000 0x100>;
- clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
- resets = <&syscon ASPEED_RESET_XDMA>;
- interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
- aspeed,pcie-device = "bmc";
- aspeed,scu = <&syscon>;
- status = "disabled";
- };
-
adc: adc@1e6e9000 {
compatible = "aspeed,ast2500-adc";
reg = <0x1e6e9000 0xb0>;
sram: sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x9000>; // 36K
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
sdmmc: sd-controller@1e740000 {
resets = <&syscon ASPEED_RESET_MII>;
};
- mac0: ftgmac@1e660000 {
+ mac0: ethernet@1e660000 {
compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
- #address-cells = <1>;
- #size-cells = <0>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
status = "disabled";
};
- mac1: ftgmac@1e680000 {
+ mac1: ethernet@1e680000 {
compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
- #address-cells = <1>;
- #size-cells = <0>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
status = "disabled";
};
- mac2: ftgmac@1e670000 {
+ mac2: ethernet@1e670000 {
compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
reg = <0x1e670000 0x180>;
- #address-cells = <1>;
- #size-cells = <0>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
status = "disabled";
};
- mac3: ftgmac@1e690000 {
+ mac3: ethernet@1e690000 {
compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
reg = <0x1e690000 0x180>;
- #address-cells = <1>;
- #size-cells = <0>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
status = "disabled";
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
};
- xdma: xdma@1e6e7000 {
- compatible = "aspeed,ast2600-xdma";
- reg = <0x1e6e7000 0x100>;
- clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
- resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
- reset-names = "device", "root-complex";
- interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
- <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
- aspeed,pcie-device = "bmc";
- aspeed,scu = <&syscon>;
- status = "disabled";
- };
-
adc0: adc@1e6e9000 {
compatible = "aspeed,ast2600-adc0";
reg = <0x1e6e9000 0x100>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+
+/ {
+ aliases {
+ i2c100 = &cfam0_i2c0;
+ i2c101 = &cfam0_i2c1;
+ i2c110 = &cfam0_i2c10;
+ i2c111 = &cfam0_i2c11;
+ i2c112 = &cfam0_i2c12;
+ i2c113 = &cfam0_i2c13;
+ i2c114 = &cfam0_i2c14;
+ i2c115 = &cfam0_i2c15;
+ i2c202 = &cfam1_i2c2;
+ i2c203 = &cfam1_i2c3;
+ i2c210 = &cfam1_i2c10;
+ i2c211 = &cfam1_i2c11;
+ i2c214 = &cfam1_i2c14;
+ i2c215 = &cfam1_i2c15;
+ i2c216 = &cfam1_i2c16;
+ i2c217 = &cfam1_i2c17;
+ i2c300 = &cfam2_i2c0;
+ i2c301 = &cfam2_i2c1;
+ i2c310 = &cfam2_i2c10;
+ i2c311 = &cfam2_i2c11;
+ i2c312 = &cfam2_i2c12;
+ i2c313 = &cfam2_i2c13;
+ i2c314 = &cfam2_i2c14;
+ i2c315 = &cfam2_i2c15;
+ i2c402 = &cfam3_i2c2;
+ i2c403 = &cfam3_i2c3;
+ i2c410 = &cfam3_i2c10;
+ i2c411 = &cfam3_i2c11;
+ i2c414 = &cfam3_i2c14;
+ i2c415 = &cfam3_i2c15;
+ i2c416 = &cfam3_i2c16;
+ i2c417 = &cfam3_i2c17;
+
+ sbefifo100 = &sbefifo100;
+ sbefifo101 = &sbefifo101;
+ sbefifo110 = &sbefifo110;
+ sbefifo111 = &sbefifo111;
+ sbefifo112 = &sbefifo112;
+ sbefifo113 = &sbefifo113;
+ sbefifo114 = &sbefifo114;
+ sbefifo115 = &sbefifo115;
+ sbefifo202 = &sbefifo202;
+ sbefifo203 = &sbefifo203;
+ sbefifo210 = &sbefifo210;
+ sbefifo211 = &sbefifo211;
+ sbefifo214 = &sbefifo214;
+ sbefifo215 = &sbefifo215;
+ sbefifo216 = &sbefifo216;
+ sbefifo217 = &sbefifo217;
+ sbefifo300 = &sbefifo300;
+ sbefifo301 = &sbefifo301;
+ sbefifo310 = &sbefifo310;
+ sbefifo311 = &sbefifo311;
+ sbefifo312 = &sbefifo312;
+ sbefifo313 = &sbefifo313;
+ sbefifo314 = &sbefifo314;
+ sbefifo315 = &sbefifo315;
+ sbefifo402 = &sbefifo402;
+ sbefifo403 = &sbefifo403;
+ sbefifo410 = &sbefifo410;
+ sbefifo411 = &sbefifo411;
+ sbefifo414 = &sbefifo414;
+ sbefifo415 = &sbefifo415;
+ sbefifo416 = &sbefifo416;
+ sbefifo417 = &sbefifo417;
+
+ scom100 = &scom100;
+ scom101 = &scom101;
+ scom110 = &scom110;
+ scom111 = &scom111;
+ scom112 = &scom112;
+ scom113 = &scom113;
+ scom114 = &scom114;
+ scom115 = &scom115;
+ scom202 = &scom202;
+ scom203 = &scom203;
+ scom210 = &scom210;
+ scom211 = &scom211;
+ scom214 = &scom214;
+ scom215 = &scom215;
+ scom216 = &scom216;
+ scom217 = &scom217;
+ scom300 = &scom300;
+ scom301 = &scom301;
+ scom310 = &scom310;
+ scom311 = &scom311;
+ scom312 = &scom312;
+ scom313 = &scom313;
+ scom314 = &scom314;
+ scom315 = &scom315;
+ scom402 = &scom402;
+ scom403 = &scom403;
+ scom410 = &scom410;
+ scom411 = &scom411;
+ scom414 = &scom414;
+ scom415 = &scom415;
+ scom416 = &scom416;
+ scom417 = &scom417;
+
+ spi10 = &cfam0_spi0;
+ spi11 = &cfam0_spi1;
+ spi12 = &cfam0_spi2;
+ spi13 = &cfam0_spi3;
+ spi20 = &cfam1_spi0;
+ spi21 = &cfam1_spi1;
+ spi22 = &cfam1_spi2;
+ spi23 = &cfam1_spi3;
+ spi30 = &cfam2_spi0;
+ spi31 = &cfam2_spi1;
+ spi32 = &cfam2_spi2;
+ spi33 = &cfam2_spi3;
+ spi40 = &cfam3_spi0;
+ spi41 = &cfam3_spi1;
+ spi42 = &cfam3_spi2;
+ spi43 = &cfam3_spi3;
+ };
+};
+
+&fsim0 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "okay";
+ bus-frequency = <100000000>;
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_i2c0: i2c-bus@0 {
+ reg = <0>; /* OMI01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom100: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo100: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c1: i2c-bus@1 {
+ reg = <1>; /* OMI23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom101: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo101: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom110: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo110: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom111: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo111: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom112: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo112: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom113: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo113: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom114: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo114: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom115: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo115: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam0_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam0_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam0_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi_hub0: fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&fsi_hub0 {
+ cfam@1,0 {
+ reg = <1 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <1>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_i2c2: i2c-bus@2 {
+ reg = <2>; /* OMI45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom202: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo202: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c3: i2c-bus@3 {
+ reg = <3>; /* OMI67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom203: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo203: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom210: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo210: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom211: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo211: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom214: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo214: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom215: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo215: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom216: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo216: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom217: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo217: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam1_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam1_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam1_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@2,0 {
+ reg = <2 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <2>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam2_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom300: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo300: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom301: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo301: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom310: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo310: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom311: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo311: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom312: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo312: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom313: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo313: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom314: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo314: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom315: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo315: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam2_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam2_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam2_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam2_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@3,0 {
+ reg = <3 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <3>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom402: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo402: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom403: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo403: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom410: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo410: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom411: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo411: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom414: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo414: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom415: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo415: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom416: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo416: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom417: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo417: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam3_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam3_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam3_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+};
model = "BCM21664 Garnet board";
compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
// SPDX-License-Identifier: GPL-2.0-only
// Copyright (C) 2014 Broadcom Corporation
-#include <dt-bindings/clock/bcm21664.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "bcm2166x-common.dtsi"
/ {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "BCM21664 SoC";
- compatible = "brcm,bcm21664";
interrupt-parent = <&gic>;
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
+};
- gic: interrupt-controller@3ff00100 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x3ff01000 0x1000>,
- <0x3ff00100 0x100>;
- };
-
- smc@3404e000 {
- compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
- reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
- };
-
- uartb: serial@3e000000 {
- compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
- reg = <0x3e000000 0x118>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uartb2: serial@3e001000 {
- compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
- reg = <0x3e001000 0x118>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uartb3: serial@3e002000 {
- compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
- reg = <0x3e002000 0x118>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- L2: cache-controller@3ff20000 {
- compatible = "arm,pl310-cache";
- reg = <0x3ff20000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
-
- brcm,resetmgr@35001f00 {
- compatible = "brcm,bcm21664-resetmgr";
- reg = <0x35001f00 0x24>;
- };
-
- timer@35006000 {
- compatible = "brcm,kona-timer";
- reg = <0x35006000 0x1c>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
- };
-
- gpio: gpio@35003000 {
- compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
- reg = <0x35003000 0x524>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- sdio1: mmc@3f180000 {
- compatible = "brcm,kona-sdhci";
- reg = <0x3f180000 0x801c>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
- status = "disabled";
- };
-
- sdio2: mmc@3f190000 {
- compatible = "brcm,kona-sdhci";
- reg = <0x3f190000 0x801c>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
- status = "disabled";
- };
-
- sdio3: mmc@3f1a0000 {
- compatible = "brcm,kona-sdhci";
- reg = <0x3f1a0000 0x801c>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
- status = "disabled";
- };
-
- sdio4: mmc@3f1b0000 {
- compatible = "brcm,kona-sdhci";
- reg = <0x3f1b0000 0x801c>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
- status = "disabled";
- };
-
- bsc1: i2c@3e016000 {
- compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
- reg = <0x3e016000 0x70>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
- status = "disabled";
- };
-
- bsc2: i2c@3e017000 {
- compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
- reg = <0x3e017000 0x70>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
- status = "disabled";
- };
-
- bsc3: i2c@3e018000 {
- compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
- reg = <0x3e018000 0x70>;
- interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
- status = "disabled";
- };
-
- bsc4: i2c@3e01c000 {
- compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
- reg = <0x3e01c000 0x70>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
- status = "disabled";
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /*
- * Fixed clocks are defined before CCUs whose
- * clocks may depend on them.
- */
-
- ref_32k_clk: ref_32k {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- };
-
- bbl_32k_clk: bbl_32k {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- };
-
- ref_13m_clk: ref_13m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
- };
-
- var_13m_clk: var_13m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
- };
-
- dft_19_5m_clk: dft_19_5m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <19500000>;
- };
-
- ref_crystal_clk: ref_crystal {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <26000000>;
- };
-
- ref_52m_clk: ref_52m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <52000000>;
- };
-
- var_52m_clk: var_52m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <52000000>;
- };
-
- usb_otg_ahb_clk: usb_otg_ahb {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <52000000>;
- };
-
- ref_96m_clk: ref_96m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <96000000>;
- };
-
- var_96m_clk: var_96m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <96000000>;
- };
-
- ref_104m_clk: ref_104m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <104000000>;
- };
-
- var_104m_clk: var_104m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <104000000>;
- };
-
- ref_156m_clk: ref_156m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <156000000>;
+&apps {
+ gic: interrupt-controller@1c01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x01c01000 0x1000>,
+ <0x01c00100 0x100>;
};
- var_156m_clk: var_156m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <156000000>;
+ L2: cache-controller@1c20000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x01c20000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
};
+};
- root_ccu: root_ccu@35001000 {
- compatible = "brcm,bcm21664-root-ccu";
- reg = <0x35001000 0x0f00>;
- #clock-cells = <1>;
- clock-output-names = "frac_1m";
- };
+&bsc1 {
+ compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
- aon_ccu: aon_ccu@35002000 {
- compatible = "brcm,bcm21664-aon-ccu";
- reg = <0x35002000 0x0f00>;
- #clock-cells = <1>;
- clock-output-names = "hub_timer";
- };
+&bsc2 {
+ compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
- master_ccu: master_ccu@3f001000 {
- compatible = "brcm,bcm21664-master-ccu";
- reg = <0x3f001000 0x0f00>;
- #clock-cells = <1>;
- clock-output-names = "sdio1",
- "sdio2",
- "sdio3",
- "sdio4",
- "sdio1_sleep",
- "sdio2_sleep",
- "sdio3_sleep",
- "sdio4_sleep";
- };
+&bsc3 {
+ compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
- slave_ccu: slave_ccu@3e011000 {
- compatible = "brcm,bcm21664-slave-ccu";
- reg = <0x3e011000 0x0f00>;
- #clock-cells = <1>;
- clock-output-names = "uartb",
- "uartb2",
- "uartb3",
- "bsc1",
- "bsc2",
- "bsc3",
- "bsc4";
- };
- };
+&bsc4 {
+ compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
- usbotg: usb@3f120000 {
- compatible = "snps,dwc2";
- reg = <0x3f120000 0x10000>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_otg_ahb_clk>;
- clock-names = "otg";
- phys = <&usbphy>;
- phy-names = "usb2-phy";
- status = "disabled";
- };
+&gpio {
+ compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+};
- usbphy: usb-phy@3f130000 {
- compatible = "brcm,kona-usb2-phy";
- reg = <0x3f130000 0x28>;
- #phy-cells = <0>;
- status = "disabled";
- };
+&smc {
+ compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common device tree for components shared between the BCM21664 and BCM23550
+ * SoCs.
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm21664.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* Hub bus */
+ hub: hub-bus@34000000 {
+ compatible = "simple-bus";
+ ranges = <0 0x34000000 0x102f83ac>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ smc: smc@4e000 {
+ /* Compatible filled by SoC DTSI */
+ reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+ };
+
+ resetmgr: reset-controller@1001f00 {
+ compatible = "brcm,bcm21664-resetmgr";
+ reg = <0x01001f00 0x24>;
+ };
+
+ gpio: gpio@1003000 {
+ /* Compatible filled by SoC DTSI */
+ reg = <0x01003000 0x524>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ timer@1006000 {
+ compatible = "brcm,kona-timer";
+ reg = <0x01006000 0x1c>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+ };
+ };
+
+ /* Slaves bus */
+ slaves: slaves-bus@3e000000 {
+ compatible = "simple-bus";
+ ranges = <0 0x3e000000 0x0001c070>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uartb: serial@0 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00000000 0x118>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uartb2: serial@1000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00001000 0x118>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uartb3: serial@2000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00002000 0x118>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ bsc1: i2c@16000 {
+ /* Compatible filled by SoC DTSI */
+ reg = <0x00016000 0x70>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+ status = "disabled";
+ };
+
+ bsc2: i2c@17000 {
+ /* Compatible filled by SoC DTSI */
+ reg = <0x00017000 0x70>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+ status = "disabled";
+ };
+
+ bsc3: i2c@18000 {
+ /* Compatible filled by SoC DTSI */
+ reg = <0x00018000 0x70>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+ status = "disabled";
+ };
+
+ bsc4: i2c@1c000 {
+ /* Compatible filled by SoC DTSI */
+ reg = <0x0001c000 0x70>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+ status = "disabled";
+ };
+ };
+
+ /* Apps bus */
+ apps: apps-bus@3e300000 {
+ compatible = "simple-bus";
+ ranges = <0 0x3e300000 0x01c02000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ usbotg: usb@e20000 {
+ compatible = "snps,dwc2";
+ reg = <0x00e20000 0x10000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_otg_ahb_clk>;
+ clock-names = "otg";
+ phys = <&usbphy>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usbphy: usb-phy@e30000 {
+ compatible = "brcm,kona-usb2-phy";
+ reg = <0x00e30000 0x28>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sdio1: mmc@e80000 {
+ compatible = "brcm,kona-sdhci";
+ reg = <0x00e80000 0x801c>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+ status = "disabled";
+ };
+
+ sdio2: mmc@e90000 {
+ compatible = "brcm,kona-sdhci";
+ reg = <0x00e90000 0x801c>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+ status = "disabled";
+ };
+
+ sdio3: mmc@ea0000 {
+ compatible = "brcm,kona-sdhci";
+ reg = <0x00ea0000 0x801c>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+ status = "disabled";
+ };
+
+ sdio4: mmc@eb0000 {
+ compatible = "brcm,kona-sdhci";
+ reg = <0x00eb0000 0x801c>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+ status = "disabled";
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * Fixed clocks are defined before CCUs whose
+ * clocks may depend on them.
+ */
+
+ ref_32k_clk: ref_32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ bbl_32k_clk: bbl_32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ref_13m_clk: ref_13m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ };
+
+ var_13m_clk: var_13m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ };
+
+ dft_19_5m_clk: dft_19_5m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <19500000>;
+ };
+
+ ref_crystal_clk: ref_crystal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ ref_52m_clk: ref_52m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <52000000>;
+ };
+
+ var_52m_clk: var_52m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <52000000>;
+ };
+
+ usb_otg_ahb_clk: usb_otg_ahb {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <52000000>;
+ };
+
+ ref_96m_clk: ref_96m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <96000000>;
+ };
+
+ var_96m_clk: var_96m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <96000000>;
+ };
+
+ ref_104m_clk: ref_104m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <104000000>;
+ };
+
+ var_104m_clk: var_104m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <104000000>;
+ };
+
+ ref_156m_clk: ref_156m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <156000000>;
+ };
+
+ var_156m_clk: var_156m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <156000000>;
+ };
+
+ root_ccu: root_ccu@35001000 {
+ compatible = "brcm,bcm21664-root-ccu";
+ reg = <0x35001000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "frac_1m";
+ };
+
+ aon_ccu: aon_ccu@35002000 {
+ compatible = "brcm,bcm21664-aon-ccu";
+ reg = <0x35002000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "hub_timer";
+ };
+
+ slave_ccu: slave_ccu@3e011000 {
+ compatible = "brcm,bcm21664-slave-ccu";
+ reg = <0x3e011000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "uartb",
+ "uartb2",
+ "uartb3",
+ "bsc1",
+ "bsc2",
+ "bsc3",
+ "bsc4";
+ };
+
+ master_ccu: master_ccu@3f001000 {
+ compatible = "brcm,bcm21664-master-ccu";
+ reg = <0x3f001000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "sdio1",
+ "sdio2",
+ "sdio3",
+ "sdio4",
+ "sdio1_sleep",
+ "sdio2_sleep",
+ "sdio3_sleep",
+ "sdio4_sleep";
+ };
+ };
+};
+// SPDX-License-Identifier: BSD-3-Clause
/*
- * BSD LICENSE
+ * Device tree for the BCM23550 SoC.
*
- * Copyright(c) 2016 Broadcom. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * Copyright (C) 2016 Broadcom
*/
-/* BCM23550 and BCM21664 have almost identical clocks */
-#include <dt-bindings/clock/bcm21664.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "bcm2166x-common.dtsi"
/ {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "BCM23550 SoC";
- compatible = "brcm,bcm23550";
interrupt-parent = <&gic>;
cpus {
clock-frequency = <1000000000>;
};
};
+};
- /* Hub bus */
- hub@34000000 {
- compatible = "simple-bus";
- ranges = <0 0x34000000 0x102f83ac>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- smc@4e000 {
- compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
- reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
- };
-
- resetmgr: reset-controller@1001f00 {
- compatible = "brcm,bcm21664-resetmgr";
- reg = <0x01001f00 0x24>;
- };
-
- gpio: gpio@1003000 {
- compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
- reg = <0x01003000 0x524>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- timer@1006000 {
- compatible = "brcm,kona-timer";
- reg = <0x01006000 0x1c>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
- };
- };
-
- /* Slaves bus */
- slaves@3e000000 {
- compatible = "simple-bus";
- ranges = <0 0x3e000000 0x0001c070>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- uartb: serial@0 {
- compatible = "snps,dw-apb-uart";
- reg = <0x00000000 0x118>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uartb2: serial@1000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x00001000 0x118>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uartb3: serial@2000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x00002000 0x118>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- bsc1: i2c@16000 {
- compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
- reg = <0x00016000 0x70>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
- status = "disabled";
- };
-
- bsc2: i2c@17000 {
- compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
- reg = <0x00017000 0x70>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
- status = "disabled";
- };
-
- bsc3: i2c@18000 {
- compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
- reg = <0x00018000 0x70>;
- interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
- status = "disabled";
- };
-
- bsc4: i2c@1c000 {
- compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
- reg = <0x0001c000 0x70>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
- status = "disabled";
- };
- };
-
- /* Apps bus */
- apps@3e300000 {
- compatible = "simple-bus";
- ranges = <0 0x3e300000 0x01b77000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- usbotg: usb@e20000 {
- compatible = "snps,dwc2";
- reg = <0x00e20000 0x10000>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_otg_ahb_clk>;
- clock-names = "otg";
- phys = <&usbphy>;
- phy-names = "usb2-phy";
- status = "disabled";
- };
-
- usbphy: usb-phy@e30000 {
- compatible = "brcm,kona-usb2-phy";
- reg = <0x00e30000 0x28>;
- #phy-cells = <0>;
- status = "disabled";
- };
-
- sdio1: mmc@e80000 {
- compatible = "brcm,kona-sdhci";
- reg = <0x00e80000 0x801c>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
- status = "disabled";
- };
-
- sdio2: mmc@e90000 {
- compatible = "brcm,kona-sdhci";
- reg = <0x00e90000 0x801c>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
- status = "disabled";
- };
-
- sdio3: mmc@ea0000 {
- compatible = "brcm,kona-sdhci";
- reg = <0x00ea0000 0x801c>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
- status = "disabled";
- };
-
- sdio4: mmc@eb0000 {
- compatible = "brcm,kona-sdhci";
- reg = <0x00eb0000 0x801c>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
- status = "disabled";
- };
-
+&apps {
cdc: cdc@1b0e000 {
compatible = "brcm,bcm23550-cdc";
reg = <0x01b0e000 0x78>;
reg = <0x01b21000 0x1000>,
<0x01b22000 0x1000>;
};
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /*
- * Fixed clocks are defined before CCUs whose
- * clocks may depend on them.
- */
-
- ref_32k_clk: ref_32k {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- };
-
- bbl_32k_clk: bbl_32k {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- };
-
- ref_13m_clk: ref_13m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
- };
-
- var_13m_clk: var_13m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
- };
-
- dft_19_5m_clk: dft_19_5m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <19500000>;
- };
-
- ref_crystal_clk: ref_crystal {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <26000000>;
- };
-
- ref_52m_clk: ref_52m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <52000000>;
- };
-
- var_52m_clk: var_52m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <52000000>;
- };
-
- usb_otg_ahb_clk: usb_otg_ahb {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <52000000>;
- };
-
- ref_96m_clk: ref_96m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <96000000>;
- };
-
- var_96m_clk: var_96m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <96000000>;
- };
-
- ref_104m_clk: ref_104m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <104000000>;
- };
-
- var_104m_clk: var_104m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <104000000>;
- };
+};
- ref_156m_clk: ref_156m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <156000000>;
- };
+&bsc1 {
+ compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
- var_156m_clk: var_156m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <156000000>;
- };
+&bsc2 {
+ compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
- root_ccu: root_ccu@35001000 {
- compatible = "brcm,bcm21664-root-ccu";
- reg = <0x35001000 0x0f00>;
- #clock-cells = <1>;
- clock-output-names = "frac_1m";
- };
+&bsc3 {
+ compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
- aon_ccu: aon_ccu@35002000 {
- compatible = "brcm,bcm21664-aon-ccu";
- reg = <0x35002000 0x0f00>;
- #clock-cells = <1>;
- clock-output-names = "hub_timer";
- };
+&bsc4 {
+ compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
- slave_ccu: slave_ccu@3e011000 {
- compatible = "brcm,bcm21664-slave-ccu";
- reg = <0x3e011000 0x0f00>;
- #clock-cells = <1>;
- clock-output-names = "uartb",
- "uartb2",
- "uartb3",
- "bsc1",
- "bsc2",
- "bsc3",
- "bsc4";
- };
+&gpio {
+ compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+};
- master_ccu: master_ccu@3f001000 {
- compatible = "brcm,bcm21664-master-ccu";
- reg = <0x3f001000 0x0f00>;
- #clock-cells = <1>;
- clock-output-names = "sdio1",
- "sdio2",
- "sdio3",
- "sdio4",
- "sdio1_sleep",
- "sdio2_sleep",
- "sdio3_sleep",
- "sdio4_sleep";
- };
- };
+&smc {
+ compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
};
};
&hdmi {
- hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+ hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>;
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
status = "okay";
};
<0x40000000 0x40000000 0x00001000>;
dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
- local_intc: local_intc@40000000 {
+ local_intc: interrupt-controller@40000000 {
compatible = "brcm,bcm2836-l1-intc";
reg = <0x40000000 0x100>;
interrupt-controller;
reg = <0x50>;
pagesize = <32>;
read-only;
- #address-cells = <1>;
- #size-cells = <1>;
- mac_address: mac-address@66 {
- reg = <0x66 0x6>;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_address: mac-address@66 {
+ reg = <0x66 0x6>;
+ };
};
};
};
reg = <0x50>;
pagesize = <32>;
read-only;
- #address-cells = <1>;
- #size-cells = <1>;
- mac_address: mac-address@66 {
- reg = <0x66 0x6>;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_address: mac-address@66 {
+ reg = <0x66 0x6>;
+ };
};
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Liebherr controller BK3.1 based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+ model = "Liebherr controller BK3.1";
+ compatible = "liebherr,bk3", "cirrus,ep9301";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* should be set from ATAGS */
+ reg = <0x00000000 0x02000000>,
+ <0x000530c0 0x01fdd000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ label = "grled";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ };
+
+ led-1 {
+ label = "rdled";
+ gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_FAULT;
+ };
+ };
+};
+
+&ebi {
+ nand-controller@60000000 {
+ compatible = "technologic,ts7200-nand";
+ reg = <0x60000000 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "System";
+ reg = <0x00000000 0x01e00000>;
+ read-only;
+ };
+
+ partition@1e00000 {
+ label = "Data";
+ reg = <0x01e00000 0x05f20000>;
+ };
+
+ partition@7d20000 {
+ label = "RedBoot";
+ reg = <0x07d20000 0x002e0000>;
+ read-only;
+ };
+ };
+ };
+ };
+};
+
+ð0 {
+ phy-handle = <&phy0>;
+};
+
+&i2s {
+ dmas = <&dma0 0 1>, <&dma0 0 2>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_on_ac97_pins>;
+ status = "okay";
+};
+
+&gpio1 {
+ /* PWM */
+ gpio-ranges = <&syscon 6 163 1>;
+};
+
+&gpio4 {
+ gpio-ranges = <&syscon 0 97 2>;
+ status = "okay";
+};
+
+&gpio6 {
+ gpio-ranges = <&syscon 0 87 2>;
+ status = "okay";
+};
+
+&gpio7 {
+ gpio-ranges = <&syscon 2 199 4>;
+ status = "okay";
+};
+
+&mdio0 {
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Device Tree file for Cirrus Logic EDB9302 board based on EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cirrus,edb9302", "cirrus,ep9301";
+ model = "cirrus,edb9302";
+
+ chosen {
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* should be set from ATAGS */
+ reg = <0x0000000 0x800000>,
+ <0x1000000 0x800000>,
+ <0x4000000 0x800000>,
+ <0x5000000 0x800000>;
+ };
+
+ sound {
+ compatible = "audio-graph-card2";
+ label = "EDB93XX";
+ links = <&i2s_port>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ label = "grled";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ };
+
+ led-1 {
+ label = "rdled";
+ gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_FAULT;
+ };
+ };
+};
+
+&adc {
+ status = "okay";
+};
+
+&ebi {
+ flash@60000000 {
+ compatible = "cfi-flash";
+ reg = <0x60000000 0x1000000>;
+ bank-width = <2>;
+ };
+};
+
+ð0 {
+ phy-handle = <&phy0>;
+};
+
+&gpio0 {
+ gpio-ranges = <&syscon 0 153 1>,
+ <&syscon 1 152 1>,
+ <&syscon 2 151 1>,
+ <&syscon 3 148 1>,
+ <&syscon 4 147 1>,
+ <&syscon 5 146 1>,
+ <&syscon 6 145 1>,
+ <&syscon 7 144 1>;
+};
+
+&gpio1 {
+ gpio-ranges = <&syscon 0 143 1>,
+ <&syscon 1 142 1>,
+ <&syscon 2 141 1>,
+ <&syscon 3 140 1>,
+ <&syscon 4 165 1>,
+ <&syscon 5 164 1>,
+ <&syscon 6 163 1>,
+ <&syscon 7 160 1>;
+};
+
+&gpio2 {
+ gpio-ranges = <&syscon 0 115 1>;
+};
+
+/* edb9302 doesn't have GPIO Port D present */
+&gpio3 {
+ status = "disabled";
+};
+
+&gpio4 {
+ gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio5 {
+ gpio-ranges = <&syscon 1 170 1>,
+ <&syscon 2 169 1>,
+ <&syscon 3 168 1>;
+};
+
+&gpio6 {
+ gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+ gpio-ranges = <&syscon 2 199 4>;
+};
+
+&i2s {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_on_ac97_pins>;
+ status = "okay";
+ i2s_port: port {
+ i2s_ep: endpoint {
+ system-clock-direction-out;
+ frame-master;
+ bitclock-master;
+ mclk-fs = <256>;
+ dai-format = "i2s";
+ convert-channels = <2>;
+ convert-sample-format = "s32_le";
+ remote-endpoint = <&codec_ep>;
+ };
+ };
+};
+
+&mdio0 {
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&spi0 {
+ cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW
+ &gpio0 7 GPIO_ACTIVE_LOW>;
+ dmas = <&dma1 10 2>, <&dma1 10 1>;
+ dma-names = "rx", "tx";
+ status = "okay";
+
+ cs4271: codec@0 {
+ compatible = "cirrus,cs4271";
+ reg = <0>;
+ #sound-dai-cells = <0>;
+ spi-max-frequency = <6000000>;
+ spi-cpol;
+ spi-cpha;
+ reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ port {
+ codec_ep: endpoint {
+ remote-endpoint = <&i2s_ep>;
+ };
+ };
+ };
+
+ at25f1024: eeprom@1 {
+ compatible = "atmel,at25";
+ reg = <1>;
+ address-width = <8>;
+ size = <0x20000>;
+ pagesize = <256>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Technologic Systems ts7250 board based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+ compatible = "technologic,ts7250", "cirrus,ep9301";
+ model = "TS-7250 SBC";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* should be set from ATAGS */
+ reg = <0x00000000 0x02000000>,
+ <0x000530c0 0x01fdd000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ label = "grled";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ };
+
+ led-1 {
+ label = "rdled";
+ gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_FAULT;
+ };
+ };
+};
+
+&ebi {
+ nand-controller@60000000 {
+ compatible = "technologic,ts7200-nand";
+ reg = <0x60000000 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "TS-BOOTROM";
+ reg = <0x00000000 0x00020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "Linux";
+ reg = <0x00020000 0x07d00000>;
+ };
+
+ partition@7d20000 {
+ label = "RedBoot";
+ reg = <0x07d20000 0x002e0000>;
+ read-only;
+ };
+ };
+ };
+ };
+
+ rtc@10800000 {
+ compatible = "st,m48t86";
+ reg = <0x10800000 0x1>,
+ <0x11700000 0x1>;
+ };
+
+ watchdog@23800000 {
+ compatible = "technologic,ts7200-wdt";
+ reg = <0x23800000 0x01>,
+ <0x23c00000 0x01>;
+ timeout-sec = <30>;
+ };
+};
+
+ð0 {
+ phy-handle = <&phy0>;
+};
+
+&gpio1 {
+ /* PWM */
+ gpio-ranges = <&syscon 6 163 1>;
+};
+
+/* ts7250 doesn't have GPIO Port D present */
+&gpio3 {
+ status = "disabled";
+};
+
+&gpio4 {
+ gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio6 {
+ gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+ gpio-ranges = <&syscon 2 199 4>;
+};
+
+&spi0 {
+ cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ dmas = <&dma1 10 2>, <&dma1 10 1>;
+ dma-names = "rx", "tx";
+ status = "okay";
+
+ tmp122: temperature-sensor@0 {
+ compatible = "ti,tmp122";
+ reg = <0>;
+ spi-max-frequency = <2000000>;
+ };
+};
+
+&mdio0 {
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cirrus Logic systems EP93XX SoC
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+/ {
+ soc: soc {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ syscon: syscon@80930000 {
+ compatible = "cirrus,ep9301-syscon", "syscon";
+ reg = <0x80930000 0x1000>;
+
+ #clock-cells = <1>;
+ clocks = <&xtali>;
+
+ spi_default_pins: pins-spi {
+ function = "spi";
+ groups = "ssp";
+ };
+
+ ac97_default_pins: pins-ac97 {
+ function = "ac97";
+ groups = "ac97";
+ };
+
+ i2s_on_ssp_pins: pins-i2sonssp {
+ function = "i2s";
+ groups = "i2s_on_ssp";
+ };
+
+ i2s_on_ac97_pins: pins-i2sonac97 {
+ function = "i2s";
+ groups = "i2s_on_ac97";
+ };
+
+ gpio1_default_pins: pins-gpio1 {
+ function = "gpio";
+ groups = "gpio1agrp";
+ };
+
+ pwm1_default_pins: pins-pwm1 {
+ function = "pwm";
+ groups = "pwm1";
+ };
+
+ gpio2_default_pins: pins-gpio2 {
+ function = "gpio";
+ groups = "gpio2agrp";
+ };
+
+ gpio3_default_pins: pins-gpio3 {
+ function = "gpio";
+ groups = "gpio3agrp";
+ };
+
+ keypad_default_pins: pins-keypad {
+ function = "keypad";
+ groups = "keypadgrp";
+ };
+
+ gpio4_default_pins: pins-gpio4 {
+ function = "gpio";
+ groups = "gpio4agrp";
+ };
+
+ gpio6_default_pins: pins-gpio6 {
+ function = "gpio";
+ groups = "gpio6agrp";
+ };
+
+ gpio7_default_pins: pins-gpio7 {
+ function = "gpio";
+ groups = "gpio7agrp";
+ };
+
+ ide_default_pins: pins-ide {
+ function = "pata";
+ groups = "idegrp";
+ };
+
+ lcd_on_dram0_pins: pins-rasteronsdram0 {
+ function = "lcd";
+ groups = "rasteronsdram0grp";
+ };
+
+ lcd_on_dram3_pins: pins-rasteronsdram3 {
+ function = "lcd";
+ groups = "rasteronsdram3grp";
+ };
+ };
+
+ adc: adc@80900000 {
+ compatible = "cirrus,ep9301-adc";
+ reg = <0x80900000 0x28>;
+ clocks = <&syscon EP93XX_CLK_ADC>;
+ interrupt-parent = <&vic0>;
+ interrupts = <30>;
+ status = "disabled";
+ };
+
+ /*
+ * The EP93XX expansion bus is a set of up to 7 each up to 16MB
+ * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+ * But since we don't require to setup it in any way, we can
+ * represent it as a simple-bus.
+ */
+ ebi: bus@80080000 {
+ compatible = "simple-bus";
+ reg = <0x80080000 0x20>;
+ native-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
+ dma0: dma-controller@80000000 {
+ compatible = "cirrus,ep9301-dma-m2p";
+ reg = <0x80000000 0x0040>,
+ <0x80000040 0x0040>,
+ <0x80000080 0x0040>,
+ <0x800000c0 0x0040>,
+ <0x80000240 0x0040>,
+ <0x80000200 0x0040>,
+ <0x800002c0 0x0040>,
+ <0x80000280 0x0040>,
+ <0x80000340 0x0040>,
+ <0x80000300 0x0040>;
+ clocks = <&syscon EP93XX_CLK_M2P0>,
+ <&syscon EP93XX_CLK_M2P1>,
+ <&syscon EP93XX_CLK_M2P2>,
+ <&syscon EP93XX_CLK_M2P3>,
+ <&syscon EP93XX_CLK_M2P4>,
+ <&syscon EP93XX_CLK_M2P5>,
+ <&syscon EP93XX_CLK_M2P6>,
+ <&syscon EP93XX_CLK_M2P7>,
+ <&syscon EP93XX_CLK_M2P8>,
+ <&syscon EP93XX_CLK_M2P9>;
+ clock-names = "m2p0", "m2p1",
+ "m2p2", "m2p3",
+ "m2p4", "m2p5",
+ "m2p6", "m2p7",
+ "m2p8", "m2p9";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>, <8>, <9>, <10>, <11>,
+ <12>, <13>, <14>, <15>, <16>;
+ #dma-cells = <2>;
+ };
+
+ dma1: dma-controller@80000100 {
+ compatible = "cirrus,ep9301-dma-m2m";
+ reg = <0x80000100 0x0040>,
+ <0x80000140 0x0040>;
+ clocks = <&syscon EP93XX_CLK_M2M0>,
+ <&syscon EP93XX_CLK_M2M1>;
+ clock-names = "m2m0", "m2m1";
+ interrupt-parent = <&vic0>;
+ interrupts = <17>, <18>;
+ #dma-cells = <2>;
+ };
+
+ eth0: ethernet@80010000 {
+ compatible = "cirrus,ep9301-eth";
+ reg = <0x80010000 0x10000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <7>;
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gpio0: gpio@80840000 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840000 0x04>,
+ <0x80840010 0x04>,
+ <0x80840090 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
+ };
+
+ gpio1: gpio@80840004 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840004 0x04>,
+ <0x80840014 0x04>,
+ <0x808400ac 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
+ };
+
+ gpio2: gpio@80840008 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840008 0x04>,
+ <0x80840018 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_default_pins>;
+ };
+
+ gpio3: gpio@8084000c {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x8084000c 0x04>,
+ <0x8084001c 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio3_default_pins>;
+ };
+
+ gpio4: gpio@80840020 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840020 0x04>,
+ <0x80840024 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio4_default_pins>;
+ };
+
+ gpio5: gpio@80840030 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840030 0x04>,
+ <0x80840034 0x04>,
+ <0x8084004c 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts-extended = <&vic0 19>, <&vic0 20>,
+ <&vic0 21>, <&vic0 22>,
+ <&vic1 15>, <&vic1 16>,
+ <&vic1 17>, <&vic1 18>;
+ };
+
+ gpio6: gpio@80840038 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840038 0x04>,
+ <0x8084003c 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio6_default_pins>;
+ };
+
+ gpio7: gpio@80840040 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840040 0x04>,
+ <0x80840044 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio7_default_pins>;
+ };
+
+ i2s: i2s@80820000 {
+ compatible = "cirrus,ep9301-i2s";
+ reg = <0x80820000 0x100>;
+ #sound-dai-cells = <0>;
+ interrupt-parent = <&vic1>;
+ interrupts = <28>;
+ clocks = <&syscon EP93XX_CLK_I2S_MCLK>,
+ <&syscon EP93XX_CLK_I2S_SCLK>,
+ <&syscon EP93XX_CLK_I2S_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ dmas = <&dma0 0 1>, <&dma0 0 2>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ ide: ide@800a0000 {
+ compatible = "cirrus,ep9312-pata";
+ reg = <0x800a0000 0x38>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ide_default_pins>;
+ status = "disabled";
+ };
+
+ vic0: interrupt-controller@800b0000 {
+ compatible = "arm,pl192-vic";
+ reg = <0x800b0000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-mask = <0x7ffffffc>;
+ valid-wakeup-mask = <0x0>;
+ };
+
+ vic1: interrupt-controller@800c0000 {
+ compatible = "arm,pl192-vic";
+ reg = <0x800c0000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-mask = <0x1fffffff>;
+ valid-wakeup-mask = <0x0>;
+ };
+
+ keypad: keypad@800f0000 {
+ compatible = "cirrus,ep9307-keypad";
+ reg = <0x800f0000 0x0c>;
+ interrupt-parent = <&vic0>;
+ interrupts = <29>;
+ clocks = <&syscon EP93XX_CLK_KEYPAD>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_default_pins>;
+ linux,keymap = <KEY_UP>,
+ <KEY_DOWN>,
+ <KEY_VOLUMEDOWN>,
+ <KEY_HOME>,
+ <KEY_RIGHT>,
+ <KEY_LEFT>,
+ <KEY_ENTER>,
+ <KEY_VOLUMEUP>,
+ <KEY_F6>,
+ <KEY_F8>,
+ <KEY_F9>,
+ <KEY_F10>,
+ <KEY_F1>,
+ <KEY_F2>,
+ <KEY_F3>,
+ <KEY_POWER>;
+ };
+
+ pwm0: pwm@80910000 {
+ compatible = "cirrus,ep9301-pwm";
+ reg = <0x80910000 0x10>;
+ clocks = <&syscon EP93XX_CLK_PWM>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@80910020 {
+ compatible = "cirrus,ep9301-pwm";
+ reg = <0x80910020 0x10>;
+ clocks = <&syscon EP93XX_CLK_PWM>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_default_pins>;
+ status = "disabled";
+ };
+
+ rtc0: rtc@80920000 {
+ compatible = "cirrus,ep9301-rtc";
+ reg = <0x80920000 0x100>;
+ };
+
+ spi0: spi@808a0000 {
+ compatible = "cirrus,ep9301-spi";
+ reg = <0x808a0000 0x18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&vic1>;
+ interrupts = <21>;
+ clocks = <&syscon EP93XX_CLK_SPI>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_default_pins>;
+ status = "disabled";
+ };
+
+ timer: timer@80810000 {
+ compatible = "cirrus,ep9301-timer";
+ reg = <0x80810000 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <19>;
+ };
+
+ uart0: serial@808c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x808c0000 0x1000>;
+ arm,primecell-periphid = <0x00041010>;
+ clocks = <&syscon EP93XX_CLK_UART1>, <&syscon EP93XX_CLK_UART>;
+ clock-names = "uartclk", "apb_pclk";
+ interrupt-parent = <&vic1>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+
+ uart1: uart@808d0000 {
+ compatible = "arm,primecell";
+ reg = <0x808d0000 0x1000>;
+ arm,primecell-periphid = <0x00041010>;
+ clocks = <&syscon EP93XX_CLK_UART2>, <&syscon EP93XX_CLK_UART>;
+ clock-names = "apb:uart2", "apb_pclk";
+ interrupt-parent = <&vic1>;
+ interrupts = <22>;
+ status = "disabled";
+ };
+
+ uart2: uart@808b0000 {
+ compatible = "arm,primecell";
+ reg = <0x808b0000 0x1000>;
+ arm,primecell-periphid = <0x00041010>;
+ clocks = <&syscon EP93XX_CLK_UART3>, <&syscon EP93XX_CLK_UART>;
+ clock-names = "apb:uart3", "apb_pclk";
+ interrupt-parent = <&vic1>;
+ interrupts = <23>;
+ status = "disabled";
+ };
+
+ usb0: usb@80020000 {
+ compatible = "generic-ohci";
+ reg = <0x80020000 0x10000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <24>;
+ clocks = <&syscon EP93XX_CLK_USB>;
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@80940000 {
+ compatible = "cirrus,ep9301-wdt";
+ reg = <0x80940000 0x08>;
+ };
+ };
+
+ xtali: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <14745600>;
+ clock-output-names = "xtali";
+ };
+};
#gpio-cells = <2>;
};
- temp: lm75@48 {
- compatible = "lm75";
+ temp: temperature-sensor@48 {
+ compatible = "national,lm75";
reg = <0x48>;
};
status = "okay";
/* U26 temperature sensor placed near SoC */
- temp1: nct75@4c {
- compatible = "lm75";
+ temp1: temperature-sensor@4c {
+ compatible = "ti,tmp75c";
reg = <0x4c>;
};
/* U27 temperature sensor placed near RTC battery */
- temp2: nct75@4d {
- compatible = "lm75";
+ temp2: temperature-sensor@4d {
+ compatible = "ti,tmp75c";
reg = <0x4d>;
};
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
- #address-cells = <1>;
- #size-cells = <0>;
i2c-analog-filter;
i2c-digital-filter;
i2c-digital-filter-width-ns = <35>;
status = "okay";
i2c0: i2c@600 {
- #address-cells = <1>;
- #size-cells = <0>;
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
status = "okay";
i2c6: i2c@600 {
- #address-cells = <1>;
- #size-cells = <0>;
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx6_default>;
};
};
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_MAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-wilc1000";
reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
mcp16502@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
+ lvin-supply = <®_5v>;
+ pvin1-supply = <®_5v>;
+ pvin2-supply = <®_5v>;
+ pvin3-supply = <®_5v>;
+ pvin4-supply = <®_5v>;
status = "okay";
lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
device_type = "memory";
reg = <0x20000000 0x20000000>;
};
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_MAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
&adc {
mcp16502@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
+ lvin-supply = <®_5v>;
+ pvin1-supply = <®_5v>;
+ pvin2-supply = <®_5v>;
+ pvin3-supply = <®_5v>;
+ pvin4-supply = <®_5v>;
status = "okay";
lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_MAIN_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
&adc {
mcp16502@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
+ lvin-supply = <®_5v>;
+ pvin1-supply = <®_5v>;
+ pvin2-supply = <®_5v>;
+ pvin3-supply = <®_5v>;
+ pvin4-supply = <®_5v>;
status = "okay";
lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
device_type = "memory";
reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */
};
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_MAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
&adc {
pmic@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
+ lvin-supply = <®_5v>;
+ pvin1-supply = <®_5v>;
+ pvin2-supply = <®_5v>;
+ pvin3-supply = <®_5v>;
+ pvin4-supply = <®_5v>;
regulators {
vdd_3v3: VDD_IO {
reg = <0x60000000 0x20000000>;
};
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_MAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sama7g5ek audio";
mcp16502@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
+ lvin-supply = <®_5v>;
+ pvin1-supply = <®_5v>;
+ pvin2-supply = <®_5v>;
+ pvin3-supply = <®_5v>;
+ pvin4-supply = <®_5v>;
status = "okay";
regulators {
i2c-digital-filter;
i2c-digital-filter-width-ns = <35>;
status = "okay";
+
+ eeprom0: eeprom@52 {
+ compatible = "microchip,24aa025e48";
+ reg = <0x52>;
+ size = <256>;
+ pagesize = <16>;
+ vcc-supply = <&vdd_3v3>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom0_eui48: eui48@fa {
+ reg = <0xfa 0x6>;
+ };
+ };
+ };
+
+ eeprom1: eeprom@53 {
+ compatible = "microchip,24aa025e48";
+ reg = <0x53>;
+ size = <256>;
+ pagesize = <16>;
+ vcc-supply = <&vdd_3v3>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom1_eui48: eui48@fa {
+ reg = <0xfa 0x6>;
+ };
+ };
+ };
};
};
&pinctrl_gmac0_txck_default
&pinctrl_gmac0_phy_irq>;
phy-mode = "rgmii-id";
+ nvmem-cells = <&eeprom0_eui48>;
+ nvmem-cell-names = "mac-address";
status = "okay";
ethernet-phy@7 {
&pinctrl_gmac1_mdio_default
&pinctrl_gmac1_phy_irq>;
phy-mode = "rmii";
+ nvmem-cells = <&eeprom1_eui48>;
+ nvmem-cell-names = "mac-address";
status = "okay"; /* Conflict with pdmc0. */
ethernet-phy@0 {
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
atmel,mux-mask = <
pinctrl: pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x600>;
atmel,mux-mask = <
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x600>;
atmel,mux-mask =
pinctrl@fffff200 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff200 0xfffff200 0xa00>;
atmel,mux-mask = <
leds {
compatible = "gpio-leds";
- ds1 {
+ led-ds1 {
label = "ds1";
gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- ds5 {
+ led-ds5 {
label = "ds5";
gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
};
leds {
compatible = "gpio-leds";
- power_blue {
+ led-power-blue {
label = "smartgw:power:blue";
gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- power_green {
+ led-power-green {
label = "smartgw:power:green";
gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- power_red {
+ led-power-red {
label = "smartgw:power:red";
gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_blue {
+ led-radio-blue {
label = "smartgw:radio:blue";
gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_green {
+ led-radio-green {
label = "smartgw:radio:green";
gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_red {
+ led-radio-red {
label = "smartgw:radio:red";
gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_blue {
+ led-internet-blue {
label = "smartgw:internet:blue";
gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_green {
+ led-internet-green {
label = "smartgw:internet:green";
gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_red {
+ led-internet-red {
label = "smartgw:internet:red";
gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- heartbeat {
+ led-heartbeat {
label = "smartgw:heartbeat";
gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- pb18 {
+ led-pb18 {
status = "disabled";
};
- pd21 {
+ led-pd21 {
status = "disabled";
};
};
pinctrl@fffff200 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff200 0xfffff200 0xa00>;
atmel,mux-mask = <
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
atmel,mux-mask = <
leds {
compatible = "gpio-leds";
- d8 {
+ led-d8 {
label = "d8";
gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
};
- d9 {
+ led-d9 {
label = "d9";
gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
- d10 {
+ led-d10 {
label = "d10";
gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
atmel,mux-mask =
pinctrl: pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
/* shared pinctrl settings */
leds {
compatible = "gpio-leds";
- pb18 {
+ led-pb18 {
label = "pb18";
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
- pd21 {
+ led-pd21 {
label = "pd21";
gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
};
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
pinctrl: pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "microchip,sam9x60-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
>;
pioA: gpio@fffff400 {
- compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
};
pioB: gpio@fffff600 {
- compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
};
pioC: gpio@fffff800 {
- compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
};
pioD: gpio@fffffa00 {
- compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
reg = <0xfffffe20 0x20>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&clk32k 0>;
+ clocks = <&clk32k 1>;
};
pit: timer@fffffe40 {
compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
reg = <0xfffffea8 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&clk32k 0>;
+ clocks = <&clk32k 1>;
};
watchdog: watchdog@ffffff80 {
pinctrl: pinctrl@fffff200 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+ compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
ranges = <0xfffff200 0xfffff200 0xa00>;
atmel,mux-mask = <
/* A B C */
pinctrl: pinctrl@fc06a000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+ compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
ranges = <0xfc068000 0xfc068000 0x100
0xfc06a000 0xfc06a000 0x4000>;
/* WARNING: revisit as pin spec has changed */
compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
reg = <0xe001d020 0x30>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk32k 0>;
+ clocks = <&clk32k 1>;
};
clk32k: clock-controller@e001d050 {
reg = <4>;
// INLET1_T
- lm75@5c {
- compatible = "ti,lm75";
+ temperature-sensor@5c {
+ compatible = "national,lm75";
reg = <0x5c>;
};
};
reg = <5>;
// OUTLET1_T
- lm75@5c {
- compatible = "ti,lm75";
+ temperature-sensor@5c {
+ compatible = "national,lm75";
reg = <0x5c>;
};
};
reg = <6>;
// OUTLET2_T
- lm75@5c {
- compatible = "ti,lm75";
+ temperature-sensor@5c {
+ compatible = "national,lm75";
reg = <0x5c>;
};
};
reg = <7>;
// OUTLET3_T
- lm75@5c {
- compatible = "ti,lm75";
+ temperature-sensor@5c {
+ compatible = "national,lm75";
reg = <0x5c>;
};
};
reg = <3>;
// M2_ZONE_T
- lm75@28 {
- compatible = "ti,lm75";
+ temperature-sensor@28 {
+ compatible = "national,lm75";
reg = <0x28>;
};
};
reg = <4>;
// BATT_ZONE_T
- lm75@29 {
- compatible = "ti,lm75";
+ temperature-sensor@29 {
+ compatible = "national,lm75";
reg = <0x29>;
};
};
reg = <5>;
// NBM1_ZONE_T
- lm75@28 {
- compatible = "ti,lm75";
+ temperature-sensor@28 {
+ compatible = "national,lm75";
reg = <0x28>;
};
};
reg = <6>;
// NBM2_ZONE_T
- lm75@29 {
- compatible = "ti,lm75";
+ temperature-sensor@29 {
+ compatible = "national,lm75";
reg = <0x29>;
};
};
clock-frequency = <100000>;
status = "okay";
lm75@48 {
- compatible = "lm75";
+ compatible = "national,lm75";
reg = <0x48>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
status = "okay";
- lm75@48 {
- compatible = "lm75";
+ temperature-sensor@48 {
+ compatible = "national,lm75";
reg = <0x48>;
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&key_pins>;
- uid {
+ button-uid {
label = "UID button";
linux,code = <KEY_HOME>;
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
- uid {
+ led-uid {
label = "UID";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
- heartbeat {
+ led-heartbeat {
label = "heartbeat";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
};
host1x@50000000 {
+ hdmi@54280000 {
+ status = "okay";
+
+ hdmi-supply = <&hdmi_5v0_sys>;
+ pll-supply = <&avdd_hdmi_pll>;
+ vdd-supply = <&avdd_hdmi>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&connector_in>;
+ };
+ };
+ };
+
dsi@54300000 {
status = "okay";
- avdd-dsi-csi-supply = <&tps65913_ldo2>;
+ avdd-dsi-csi-supply = <&avdd_dsi_csi>;
nvidia,ganged-mode = <&dsib>;
link2 = <&panel_secondary>;
- power-supply = <&vdd_lcd>;
+ power-supply = <&dvdd_1v8_lcd>;
backlight = <&backlight>;
};
};
dsi@54400000 {
status = "okay";
- avdd-dsi-csi-supply = <&tps65913_ldo2>;
+ avdd-dsi-csi-supply = <&avdd_dsi_csi>;
panel_secondary: panel@0 {
compatible = "sharp,lq101r1sx01";
};
};
+ vde@6001a000 {
+ assigned-clocks = <&tegra_car TEGRA114_CLK_VDE>;
+ assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>;
+ assigned-clock-rates = <408000000>;
+ };
+
pinmux@70000868 {
- asus_pad_ec_default: pinmux-asus-pad-ec-default {
- ec-interrupt {
- nvidia,pins = "kb_col5_pq5";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ /* WLAN SDIO pinmux */
+ sdmmc1-clk {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ sdmmc1-cmd {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ wlan-power {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ wlan-reset {
+ nvidia,pins = "gpio_x7_aud_px7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ wlan-host-wake {
+ nvidia,pins = "pu5";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ wlan-3v3-com {
+ nvidia,pins = "pu1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* UART-A pinmux */
+ uarta-cts {
+ nvidia,pins = "kb_row10_ps2";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ uarta-rts {
+ nvidia,pins = "kb_row9_ps1";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* GNSS UART-B pinmux */
+ uartb-cts {
+ nvidia,pins = "uart2_cts_n_pj5";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ uartb-rts {
+ nvidia,pins = "uart2_rts_n_pj6";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ uartb-rxd {
+ nvidia,pins = "uart2_rxd_pc3";
+ nvidia,function = "irda";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ uartb-txd {
+ nvidia,pins = "uart2_txd_pc2";
+ nvidia,function = "irda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Bluetooth UART-C pinmux */
+ uartc-cts-rxd {
+ nvidia,pins = "uart3_cts_n_pa1",
+ "uart3_rxd_pw7";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ uartc-rts-txd {
+ nvidia,pins = "uart3_rts_n_pc0",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ bt-shutdown {
+ nvidia,pins = "kb_col6_pq6",
+ "kb_col7_pq7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ bt-dev-wake {
+ nvidia,pins = "clk3_req_pee1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ bt-host-wake {
+ nvidia,pins = "pu6";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ bt-pcm-dap4-out {
+ nvidia,pins = "dap4_fs_pp4",
+ "dap4_dout_pp6",
+ "dap4_sclk_pp7";
+ nvidia,function = "i2s3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ bt-pcm-dap4-in {
+ nvidia,pins = "dap4_din_pp5";
+ nvidia,function = "i2s3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* UART-D pinmux */
+ uartd-cts {
+ nvidia,pins = "gmi_a17_pb0";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ uartd-rts {
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a19_pk7";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* MicroSD pinmux */
+ sdmmc3-clk {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ sdmmc3-data {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "kb_col4_pq4",
+ "sdmmc3_cd_n_pv2",
+ "sdmmc3_clk_lb_out_pee4",
+ "sdmmc3_clk_lb_in_pee5";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ microsd-pwr {
+ nvidia,pins = "gmi_clk_pk1";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* EMMC pinmux */
+ sdmmc4-clk-cmd {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ sdmmc4-data {
+ nvidia,pins = "sdmmc4_cmd_pt7",
+ "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* I2C pinmux */
+ gen1-i2c {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ gen2-i2c {
+ nvidia,pins = "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6";
+ nvidia,function = "i2c2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ cam-i2c {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ ddc-i2c {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwr-i2c {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* SPI pinmux */
+ spi1-out {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ spi1-in {
+ nvidia,pins = "ulpi_dir_py1";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ spi2 {
+ nvidia,pins = "ulpi_data4_po5",
+ "ulpi_data7_po0";
+ nvidia,function = "spi2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ spi4-out {
+ nvidia,pins = "gmi_ad6_pg6",
+ "gmi_wr_n_pi0";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ spi4-in {
+ nvidia,pins = "gmi_ad5_pg5",
+ "gmi_ad7_pg7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* GPIO keys pinmux */
+ hall-switch {
+ nvidia,pins = "ulpi_data4_po5";
+ nvidia,function = "spi2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ lineout-switch {
+ nvidia,pins = "gpio_x5_aud_px5";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ power-key {
+ nvidia,pins = "kb_col0_pq0";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ volume-keys {
+ nvidia,pins = "kb_row1_pr1",
+ "kb_row2_pr2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Sensors pinmux */
+ nct-irq {
+ nvidia,pins = "ulpi_data3_po4";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ mpu-irq {
+ nvidia,pins = "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* HDMI pinmux */
+ hdmi-hpd {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ hdmi-en {
+ nvidia,pins = "dap3_dout_pp2";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ hdmi-cec {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* LED pinmux */
+ backlight-pwm {
+ nvidia,pins = "gmi_ad9_ph1";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ backlight-en {
+ nvidia,pins = "gmi_ad10_ph2";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Touchscreen pinmux */
+ touch-irq {
+ nvidia,pins = "gmi_cs4_n_pk2";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ touch-rst {
+ nvidia,pins = "gmi_cs3_n_pk4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ touch-pwr {
+ nvidia,pins = "gmi_ad8_ph0";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ touch-vio {
+ nvidia,pins = "gmi_ad12_ph4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* AUDIO pinmux */
+ audio-ldo1 {
+ nvidia,pins = "sdmmc1_wp_n_pv3";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ hp-detect {
+ nvidia,pins = "kb_row7_pr7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ dap-i2s0-in {
+ nvidia,pins = "dap1_din_pn1";
+ nvidia,function = "i2s0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ dap-i2s0-out {
+ nvidia,pins = "dap1_dout_pn2",
+ "dap1_fs_pn0",
+ "dap1_sclk_pn3";
+ nvidia,function = "i2s0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ dap-i2s1-in {
+ nvidia,pins = "dap2_din_pa4";
+ nvidia,function = "i2s1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ dap-i2s1-out {
+ nvidia,pins = "dap2_dout_pa5",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3";
+ nvidia,function = "i2s1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ dap-i2s2-in {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ dap-i2s2-out {
+ nvidia,pins = "dap3_din_pp1";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ spdif-in {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ spdif-out {
+ nvidia,pins = "spdif_out_pk5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* AsusEC pinmux */
+ ec-irq {
+ nvidia,pins = "kb_col5_pq5";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ ec-req {
+ nvidia,pins = "kb_col2_pq2";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ hotplug-i2c {
+ nvidia,pins = "ulpi_data7_po0";
+ nvidia,function = "spi2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ ps2-irq {
+ nvidia,pins = "gpio_w2_aud_pw2";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ kbd-irq {
+ nvidia,pins = "gmi_cs0_n_pj0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ dvfs-pin {
+ nvidia,pins = "dvfs_pwm_px0",
+ "dvfs_clk_px2";
+ nvidia,function = "cldvfs";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Core pinmux */
+ clk-32k-out {
+ nvidia,pins = "clk_32k_out_pa0";
+ nvidia,function = "soc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ sys-clk-req {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "sysclk";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ core-pwr-req {
+ nvidia,pins = "core_pwr_req";
+ nvidia,function = "pwron";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ cpu-pwr-req {
+ nvidia,pins = "cpu_pwr_req";
+ nvidia,function = "cpu";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwr-int-n {
+ nvidia,pins = "pwr_int_n";
+ nvidia,function = "pmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ clk-32k-in {
+ nvidia,pins = "clk_32k_in";
+ nvidia,function = "clk";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ reset-out-n {
+ nvidia,pins = "reset_out_n";
+ nvidia,function = "reset_out_n";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* ULPI pinmux */
+ ulpi-data0-6 {
+ nvidia,pins = "ulpi_data0_po1",
+ "ulpi_data6_po7";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ ulpi-data1-5 {
+ nvidia,pins = "ulpi_data1_po2",
+ "ulpi_data5_po6";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ ulpi-data2-3 {
+ nvidia,pins = "ulpi_data2_po3",
+ "ulpi_data3_po4";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* PORT V */
+ pv0-gpio {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ pv1-gpio {
+ nvidia,pins = "pv1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* PORT U */
+ pu0-gpio {
+ nvidia,pins = "pu0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ pu2-gpio {
+ nvidia,pins = "pu2";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* PWM pinmux */
+ pwm0 {
+ nvidia,pins = "pu3";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm1 {
+ nvidia,pins = "pu4";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* EXTPERIPH pinmux */
+ clk1-out {
+ nvidia,pins = "clk1_out_pw4";
+ nvidia,function = "extperiph1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ clk2-out {
+ nvidia,pins = "clk2_out_pw5";
+ nvidia,function = "extperiph2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ clk3-out {
+ nvidia,pins = "clk3_out_pee0";
+ nvidia,function = "extperiph3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ clk1-req {
+ nvidia,pins = "clk1_req_pee2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* GMI pinmux */
+ gmi-wp-n {
+ nvidia,pins = "gmi_wp_n_pc7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-adv {
+ nvidia,pins = "gmi_adv_n_pk0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-ad0-ad1 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad1_pg1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ gmi-ad2-ad3 {
+ nvidia,pins = "gmi_ad2_pg2",
+ "gmi_ad3_pg3";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-iordy {
+ nvidia,pins = "gmi_iordy_pi5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-a18 {
+ nvidia,pins = "gmi_a18_pb1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-wait {
+ nvidia,pins = "gmi_wait_pi7";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ gmi-cs6-n {
+ nvidia,pins = "gmi_cs6_n_pi3";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ gmi-cs7-n {
+ nvidia,pins = "gmi_cs7_n_pi6";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-dqs-p {
+ nvidia,pins = "gmi_dqs_p_pj3";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-cs2-ad {
+ nvidia,pins = "gmi_cs2_n_pk3",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-cs4-clk {
+ nvidia,pins = "gmi_cs4_n_pk2",
+ "gmi_clk_lb";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-ad11 {
+ nvidia,pins = "gmi_ad11_ph3";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ gmi-cs1-oe {
+ nvidia,pins = "gmi_cs1_n_pj2",
+ "gmi_oe_n_pi1";
+ nvidia,function = "soc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ec-request {
- nvidia,pins = "kb_col2_pq2";
- nvidia,function = "kbc";
+ gmi-ad4 {
+ nvidia,pins = "gmi_ad4_pg4";
+ nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- };
- backlight_default: pinmux-backlight-default {
- backlight-enable {
- nvidia,pins = "gmi_ad10_ph2";
- nvidia,function = "gmi";
+ gmi-ad13 {
+ nvidia,pins = "gmi_ad13_ph5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-rst-n {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- };
- codec_default: pinmux-codec-default {
- interrupt {
- nvidia,pins = "gpio_w2_aud_pw2",
- "gpio_w3_aud_pw3";
- nvidia,function = "spi6";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ /* PORT CC */
+ pcc-gpio {
+ nvidia,pins = "pcc1", "pcc2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ldo1-en {
- nvidia,pins = "sdmmc1_wp_n_pv3";
- nvidia,function = "sdmmc1";
+ /* PORT BB */
+ pbb3-gpio {
+ nvidia,pins = "pbb3";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ pbb4-5-6-gpio {
+ nvidia,pins = "pbb4", "pbb5", "pbb6";
+ nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- };
- gpio_hall_sensor_default: pinmux-gpio-hall-sensor-default {
- ulpi_data4_po5 {
- nvidia,pins = "ulpi_data4_po5";
- nvidia,function = "spi2";
+ pbb7-gpio {
+ nvidia,pins = "pbb7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* KBC pinmux */
+ kb-r0-c1 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_col1_pq1";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- };
- gpio_keys_default: pinmux-gpio-keys-default {
- power {
- nvidia,pins = "kb_col0_pq0";
+ kb-row4 {
+ nvidia,pins = "kb_row4_pr4";
nvidia,function = "kbc";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- volume {
- nvidia,pins = "kb_row1_pr1",
- "kb_row2_pr2";
- nvidia,function = "rsvd2";
+ kb-row5 {
+ nvidia,pins = "kb_row5_pr5";
+ nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- };
- hp_det_default: pinmux-hp-det-default {
- gmi_iordy_pi5 {
- nvidia,pins = "kb_row7_pr7";
- nvidia,function = "rsvd2";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ kb-row6 {
+ nvidia,pins = "kb_row6_pr6";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- };
- imu_default: pinmux-imu-default {
- kb_row3_pr3 {
- nvidia,pins = "kb_row3_pr3";
- nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ kb-r8-c3 {
+ nvidia,pins = "kb_row8_ps0",
+ "kb_col3_pq3";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- };
- pwm_default: pinmux-pwm-default {
- gmi_ad9_ph1 {
- nvidia,pins = "gmi_ad9_ph1";
- nvidia,function = "pwm1";
+ /* VI pinmux */
+ cam-mclk {
+ nvidia,pins = "cam_mclk_pcc0",
+ "pbb0";
+ nvidia,function = "vi_alt3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- };
- /* XXX make this something more sensible */
- pwm_sleep: pinmux-pwm-sleep {
- gmi_ad9_ph1 {
- nvidia,pins = "gmi_ad9_ph1";
- nvidia,function = "pwm1";
+ /* AUD pinmux */
+ gpio-x4-aud {
+ nvidia,pins = "gpio_x4_aud_px4";
+ nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- };
- sdmmc3_default: pinmux-sdmmc3-default {
- drive_sdio3 {
- nvidia,pins = "drive_sdio3";
- nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
- nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,pull-down-strength = <22>;
- nvidia,pull-up-strength = <36>;
- nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
- nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ gpio-x1-aud {
+ nvidia,pins = "gpio_x1_aud_px1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_clk_pa6 {
- nvidia,pins = "sdmmc3_clk_pa6";
- nvidia,function = "sdmmc3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ gpio-x3-aud {
+ nvidia,pins = "gpio_x3_aud_px3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cmd_pa7 {
- nvidia,pins = "sdmmc3_cmd_pa7",
- "sdmmc3_dat0_pb7",
- "sdmmc3_dat1_pb6",
- "sdmmc3_dat2_pb5",
- "sdmmc3_dat3_pb4",
- "kb_col4_pq4",
- "sdmmc3_clk_lb_out_pee4",
- "sdmmc3_clk_lb_in_pee5",
- "sdmmc3_cd_n_pv2";
- nvidia,function = "sdmmc3";
+ gpio-x6-aud {
+ nvidia,pins = "gpio_x6_aud_px6";
+ nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- };
- sdmmc3_vdd_default: pinmux-sdmmc3-vdd-default {
- gmi_clk_pk1 {
- nvidia,pins = "gmi_clk_pk1";
- nvidia,function = "gmi";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ usb-vbus {
+ nvidia,pins = "usb_vbus_en0_pn4",
+ "usb_vbus_en1_pn5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- };
- vdd_lcd_default: pinmux-vdd-lcd-default {
- sdmmc4_clk_pcc4 {
- nvidia,pins = "sdmmc4_clk_pcc4";
- nvidia,function = "sdmmc4";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ /* GPIO power/drive control */
+ drive-sdio1 {
+ nvidia,pins = "drive_sdio1";
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,pull-down-strength = <36>;
+ nvidia,pull-up-strength = <20>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+ };
+
+ drive-sdio3 {
+ nvidia,pins = "drive_sdio3";
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,pull-down-strength = <22>;
+ nvidia,pull-up-strength = <36>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ };
+
+ drive-gma {
+ nvidia,pins = "drive_gma";
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,pull-down-strength = <2>;
+ nvidia,pull-up-strength = <2>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
};
};
};
};
serial@70006200 {
- /* Bluetooth */
+ compatible = "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart";
+ reset-names = "serial";
+ /delete-property/ reg-shift;
+ status = "okay";
+
+ nvidia,adjust-baud-rates = <0 9600 100>,
+ <9600 115200 200>,
+ <1000000 4000000 136>;
+
+ bluetooth {
+ compatible = "brcm,bcm4334-bt";
+ max-speed = <4000000>;
+
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+ clock-names = "txco";
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
+
+ device-wakeup-gpios = <&gpio TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio TEGRA_GPIO(Q, 6) GPIO_ACTIVE_LOW>;
+
+ vbat-supply = <&vdd_3v3_com>;
+ vddio-supply = <&vdd_1v8_vio>;
+ };
};
serial@70006300 {
pwm@7000a000 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pwm_default>;
- pinctrl-1 = <&pwm_sleep>;
};
i2c@7000c000 {
compatible = "asahi-kasei,ak09911";
reg = <0xc>;
- vdd-supply = <&vdd_3v3_sys>;
+ /* no DRDY (polling) */
+
+ vdd-supply = <&vdd_2v85_sen>;
+ vid-supply = <&vdd_1v8_vio>;
+
+ mount-matrix = "0", "1", "0",
+ "1", "0", "0",
+ "0", "0","-1";
};
rt5639: audio-codec@1c {
compatible = "realtek,rt5639";
reg = <0x1c>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
-
- realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&codec_default>;
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+ clock-names = "mclk";
};
temp_sensor: temperature-sensor@4c {
compatible = "onnn,nct1008";
reg = <0x4c>;
- vcc-supply = <&vdd_3v3_sys>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_EDGE_FALLING>;
+
+ vcc-supply = <&vdd_1v8_vio>;
#thermal-sensor-cells = <1>;
};
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
+ vdd-supply = <&vdd_2v85_sen>;
+ vddio-supply = <&vdd_1v8_vio>;
+
mount-matrix = "0", "-1", "0",
"1", "0", "0",
"0", "0", "1";
-
- pinctrl-names = "default";
- pinctrl-0 = <&imu_default>;
};
};
power-sensor@44 {
compatible = "ti,ina230";
reg = <0x44>;
+
+ shunt-resistor = <5000>;
};
};
compatible = "dynaimage,al3320a";
reg = <0x1c>;
- vdd-supply = <&vdd_3v3_sys>;
+ vdd-supply = <&vdd_1v8_vio>;
};
};
- i2c@7000c700 {
- /* HDMI DDC */
+ hdmi_ddc: i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <10000>;
};
i2c@7000d000 {
ti,system-power-controller;
+ palmas_gpadc: adc {
+ compatible = "ti,palmas-gpadc";
+ interrupts = <18 IRQ_TYPE_NONE>,
+ <16 IRQ_TYPE_NONE>,
+ <17 IRQ_TYPE_NONE>;
+
+ ti,channel0-current-microamp = <5>;
+ ti,channel3-current-microamp = <400>;
+ ti,enable-extended-delay;
+
+ #io-channel-cells = <1>;
+ };
+
+ palmas_extcon: extcon {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ };
+
palmas_gpio: gpio {
compatible = "ti,palmas-gpio";
gpio-controller;
#gpio-cells = <2>;
};
+ palmas_clk32kg@0 {
+ compatible = "ti,palmas-clk32kg";
+ #clock-cells = <0>;
+ };
+
pinmux {
compatible = "ti,tps65913-pinctrl";
ti,palmas-enable-dvfs1;
pmic {
compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
- ldo1-in-supply = <&tps65913_smps7>;
- ldo2-in-supply = <&tps65913_smps7>;
- ldo4-in-supply = <&tps65913_smps8>;
- ldo5-in-supply = <&tps65913_smps9>;
- ldo6-in-supply = <&tps65913_smps9>;
- ldo7-in-supply = <&tps65913_smps9>;
- ldo9-in-supply = <&tps65913_smps9>;
+ ldo1-in-supply = <&vddio_ddr>;
+ ldo2-in-supply = <&vddio_ddr>;
+ ldo4-in-supply = <&vdd_1v8_vio>;
+ ldo5-in-supply = <&vcore_emmc>;
+ ldo6-in-supply = <&vcore_emmc>;
+ ldo7-in-supply = <&vcore_emmc>;
+ ldo9-in-supply = <&vcore_emmc>;
+ ldoln-in-supply = <&vdd_smps10_out2>;
regulators {
- tps65913_smps123: smps123 {
- regulator-name = "vdd-cpu";
+ vdd_cpu: smps123 {
+ regulator-name = "vdd_cpu";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
ti,mode-sleep = <3>;
};
- tps65913_smps45: smps45 {
- regulator-name = "vdd-core";
+ vdd_core: smps45 {
+ regulator-name = "vdd_core";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
ti,roof-floor = <3>;
};
- smps6 {
- regulator-name = "va-lcd-hv";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ /* smps6 disabled */
- tps65913_smps7: smps7 {
- regulator-name = "vdd-ddr";
+ vddio_ddr: smps7 {
+ regulator-name = "vddio_ddr";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
- tps65913_smps8: smps8 {
- regulator-name = "vdd-1v8";
+ vdd_1v8_vio: smps8 {
+ regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
- tps65913_smps9: smps9 {
- regulator-name = "vdd-sd";
+ vcore_emmc: smps9 {
+ regulator-name = "vdd_emmc";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
- regulator-always-on;
+ regulator-boot-on;
};
- tps65913_smps10_out1: smps10_out1 {
- regulator-name = "vd-smps10-out1";
+ smps10_out1 {
+ regulator-name = "vd_smps10_out1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
- tps65913_smps10_out2: smps10_out2 {
- regulator-name = "vd-smps10-out2";
+ vdd_smps10_out2: smps10_out2 {
+ regulator-name = "vd_smps10_out2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
- tps65913_ldo1: ldo1 {
- regulator-name = "vdd-hdmi-pll";
+ avdd_hdmi_pll: ldo1 {
+ regulator-name = "avdd_hdmi_pll";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
+ regulator-boot-on;
ti,roof-floor = <3>;
};
- tps65913_ldo2: ldo2 {
- regulator-name = "vdd-2v8-dsi-csi";
+ avdd_dsi_csi: ldo2 {
+ regulator-name = "avdd_dsi_csi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
};
ldo3 {
- regulator-name = "vpp-fuse";
+ regulator-name = "vpp_fuse";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo4 {
- regulator-name = "vdd-1v2-cam";
+ vdd_1v2_cam: ldo4 {
+ regulator-name = "vdd_1v2_cam";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo5 {
- regulator-name = "vdd-cam";
+ avdd_2v8_cam: ldo5 {
+ regulator-name = "avdd_cam2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
- ldo6 {
- regulator-name = "vdd-dev";
+ vdd_2v85_sen: ldo6 {
+ regulator-name = "vdd_dev";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
- regulator-boot-on;
};
- ldo7 {
- regulator-name = "vdd-2v8-cam";
+ avdd_2v8_af: ldo7 {
+ regulator-name = "avdd_2v8_cam";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
- tps65913_ldo8: ldo8 {
- regulator-name = "vdd-rtc";
+ ldo8 {
+ regulator-name = "vdd_rtc";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <950000>;
regulator-always-on;
ti,enable-ldo8-tracking;
};
- tps65913_ldo9: ldo9 {
- regulator-name = "vdd-sdmmc";
- regulator-min-microvolt = <1800000>;
+ vddio_usd: ldo9 {
+ regulator-name = "vddio_usd";
+ /* min voltage of 1.8v is not stable */
+ regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
};
- tps65913_ldoln: ldoln {
- regulator-name = "vdd-hdmi";
+ avdd_hdmi: ldoln {
+ regulator-name = "avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
};
- ldousb {
- regulator-name = "vdd-usb";
+ avdd_usb: ldousb {
+ regulator-name = "avdd_usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on;
regulator-boot-on;
};
};
rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&palmas>;
- interrupts = <8 0>;
+ interrupts = <8 IRQ_TYPE_NONE>;
};
};
};
+ pmc@7000e400 {
+ status = "okay";
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <300>;
+ nvidia,cpu-pwr-off-time = <300>;
+ nvidia,core-pwr-good-time = <641 3845>;
+ nvidia,core-pwr-off-time = <2000>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+
+ /* Clear DEV_ON bit in DEV_CTRL register of TPS65913 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x58>;
+ nvidia,reg-addr = <0xA0>;
+ nvidia,reg-data = <0x00>;
+ };
+ };
+
ahub@70080000 {
- i2s@70080300 {
+ /* HIFI CODEC (i2s1) */
+ i2s@70080400 {
+ status = "okay";
+ };
+
+ /* BT SCO (i2s3) */
+ i2s@70080600 {
status = "okay";
};
};
+ brcm_wifi_pwrseq: pwrseq-wifi {
+ compatible = "mmc-pwrseq-simple";
+
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+ clock-names = "ext_clock";
+
+ reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <300>;
+ power-off-delay-us = <300>;
+ };
+
+ /* WiFi */
mmc@78000000 {
- /* WiFi */
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ assigned-clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
+ assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>;
+ assigned-clock-rates = <82000000>;
+
+ max-frequency = <82000000>;
+ keep-power-in-suspend;
+ bus-width = <4>;
+ non-removable;
+
+ sd-uhs-ddr50;
+ mmc-ddr-1_8v;
+
+ power-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+
+ nvidia,default-tap = <0x2>;
+ nvidia,default-trim = <0x2>;
+
+ mmc-pwrseq = <&brcm_wifi_pwrseq>;
+ vmmc-supply = <&vdd_3v3_com>;
+ vqmmc-supply = <&vdd_1v8_vio>;
+
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
};
/* MicroSD card */
nvidia,default-tap = <0x3>;
nvidia,default-trim = <0x3>;
- vmmc-supply = <&vdd_usd>;
- vqmmc-supply = <&tps65913_ldo9>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc3_default>;
+ vmmc-supply = <&vdd_2v9_usd>;
+ vqmmc-supply = <&vddio_usd>;
};
+ /* eMMC */
mmc@78000600 {
- /* eMMC */
+ status = "okay";
+ bus-width = <8>;
+
+ non-removable;
+ mmc-ddr-1_8v;
+
+ vmmc-supply = <&vcore_emmc>;
+ vqmmc-supply = <&vdd_1v8_vio>;
};
+ /* Peripheral USB via ASUS connector */
usb@7d000000 {
compatible = "nvidia,tegra114-udc";
status = "okay";
dr_mode = "peripheral";
-
- /* Peripheral USB via ASUS connector */
};
usb-phy@7d000000 {
status = "okay";
+ dr_mode = "peripheral";
+ vbus-supply = <&avdd_usb>;
};
+ /* Host USB via dock */
usb@7d008000 {
status = "okay";
-
- /* Host USB via dock */
};
usb-phy@7d008000 {
backlight: backlight {
compatible = "pwm-backlight";
- enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
- power-supply = <&vdd_5v0_sys>;
+ power-supply = <&vdd_3v7_bl>;
pwms = <&pwm 1 1000000>;
brightness-levels = <1 255>;
num-interpolated-steps = <254>;
default-brightness-level = <224>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&backlight_default>;
};
/* PMIC has a built-in 32KHz oscillator which is used by PMC */
clock-output-names = "pmic-oscillator";
};
- gpio-hall-sensor {
- compatible = "gpio-keys";
+ connector {
+ compatible = "hdmi-connector";
+ type = "d";
- label = "GPIO Hall Effect Sensor";
+ hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ ddc-i2c-bus = <&hdmi_ddc>;
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_hall_sensor_default>;
+ port {
+ connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
+ extcon-keys {
+ compatible = "gpio-keys";
switch-hall-sensor {
label = "Hall Effect Sensor";
linux,can-disable;
wakeup-source;
};
+
+ switch-lineout-detect {
+ label = "Audio dock line-out detect";
+ gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LINEOUT_INSERT>;
+ debounce-interval = <10>;
+ };
};
gpio-keys {
compatible = "gpio-keys";
- label = "GPIO Buttons";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_default>;
-
- button-power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- button-volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <10>;
};
- button-volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
"Speakers", "SPORN",
"Speakers", "SPOLP",
"Speakers", "SPOLN",
- "Mic Jack", "MICBIAS1",
- "IN2P", "Mic Jack";
+ "IN1P", "Mic Jack",
+ "IN1N", "Mic Jack",
+ "DMIC1", "Int Mic",
+ "DMIC2", "Int Mic";
- nvidia,i2s-controller = <&tegra_i2s0>;
+ nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&rt5639>;
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+ nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
<&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA114_CLK_EXTERN1>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&hp_det_default>;
};
vdd_5v0_sys: regulator-5v0-sys {
compatible = "regulator-fixed";
- regulator-name = "vdd_5v0";
+ regulator-name = "vdd_5v0_sys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vdd_3v3_sys: regulator-3v3-sys {
compatible = "regulator-fixed";
- regulator-name = "vdd_3v3";
+ regulator-name = "vdd_3v3_sys";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
- vdd_lcd: regulator-vdd-lcd {
+ dvdd_1v8_lcd: regulator-vdd-lcd {
compatible = "regulator-fixed";
- regulator-name = "vdd_lcd_1v8";
+ regulator-name = "dvdd_1v8_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- vin-supply = <&tps65913_smps8>;
+ regulator-boot-on;
+ gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vdd_1v8_vio>;
+ };
+
+ vdd_3v7_bl: regulator-bl-en {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v7_bl";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&vdd_lcd_default>;
+ hdmi_5v0_sys: regulator-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0_hdmi";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_smps10_out2>;
};
- vdd_usd: regulator-vdd-usd {
+ vdd_2v9_usd: regulator-vdd-usd {
compatible = "regulator-fixed";
regulator-name = "vdd_sd_slot";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
- vin-supply = <&tps65913_smps9>;
- enable-active-high;
+ regulator-boot-on;
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vcore_emmc>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc3_vdd_default>;
+ vdd_1v8_cam: regulator-cam-vio {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8_cam";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ gpio = <&palmas_gpio 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_1v8_vio>;
+ };
+
+ vdd_1v2_xusb: regulator-xusb-vio {
+ compatible = "regulator-fixed";
+ regulator-name = "avddio_1v2_xusb";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ gpio = <&palmas_gpio 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_3v3_xusb: regulator-xusb-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "hvdd_3v3_xusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpio = <&palmas_gpio 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_3v3_com: regulator-com {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_com";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_3v3_touch: regulator-touch-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_touch";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_1v8_touch: regulator-touch-vio {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8_touch";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
};
};
/dts-v1/;
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "tegra20.dtsi"
#include "tegra20-cpu-opp.dtsi"
conf_ata {
nvidia,pins = "ata", "atc", "atd", "ate",
"crtp", "dap2", "dap3", "dap4", "dta",
- "dtb", "dtc", "dtd", "dte", "gmb",
- "gme", "i2cp", "pta", "slxc", "slxd",
- "spdi", "spdo", "uda";
+ "dtb", "dtc", "dtd", "gmb", "gme",
+ "i2cp", "pta", "slxc", "slxd", "spdi",
+ "spdo", "uda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_atb {
nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
- "gma", "gmc", "gmd", "gpu", "gpu7",
- "gpv", "sdio1", "slxa", "slxk", "uac";
+ "dte", "gma", "gmc", "gmd", "gpu",
+ "gpu7", "gpv", "sdio1", "slxa", "slxk",
+ "uac";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
};
+ leds {
+ compatible = "gpio-leds";
+
+ led-ds2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ led-ds3 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>;
+ };
+ };
+
poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
clock-names = "ipg", "per";
};
- dma: dma@209000 {
+ dma: dma-controller@209000 {
compatible = "fsl,imx1-dma";
reg = <0x00209000 0x1000>;
interrupts = <61 60>;
reg = <0x10000000 0x20000>;
ranges;
- dma: dma@10001000 {
+ dma: dma-controller@10001000 {
compatible = "fsl,imx27-dma";
reg = <0x10001000 0x1000>;
interrupts = <32>;
gpio-controller;
};
- sensor2: lm75@49 {
- compatible = "lm75";
+ sensor2: temperature-sensor@49 {
+ compatible = "national,lm75b";
reg = <0x49>;
};
};
&display0 {
status = "okay";
-};
-&display0 {
port@1 {
display0_out: endpoint {
remote-endpoint = <&sii9022_in>;
&panel_dpi {
status = "disabled";
};
-
-&tve {
- status = "disabled";
-};
interrupts = <6 4>; /* PATA_DATA6, active high */
};
- sensor1: lm75@48 {
- compatible = "lm75";
+ sensor1: temperature-sensor@48 {
+ compatible = "national,lm75b";
reg = <0x48>;
};
};
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif>;
- spdif-out;
- spdif-in;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_out>, <&spdif_in>;
};
};
};
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif>;
- spdif-in;
- spdif-out;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_out>, <&spdif_in>;
};
};
ssi-controller = <&ssi1>;
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "On-board SPDIF";
- spdif-controller = <&spdif>;
- spdif-out;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_out>;
};
};
ssi-controller = <&ssi1>;
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound_spdif: sound-spdif {
compatible = "fsl,imx-audio-spdif";
- spdif-controller = <&spdif>;
- spdif-in;
- spdif-out;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_out>, <&spdif_in>;
model = "imx-spdif";
status = "disabled";
};
mux-ext-port = <3>;
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif>;
- spdif-out;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_out>;
};
};
>;
};
- pinctrl_gpmi_nand: gpmi-nand {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
ssi-controller = <&ssi1>;
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
sound_spdif: sound-spdif {
compatible = "fsl,imx-audio-spdif";
- spdif-controller = <&spdif>;
- spdif-in;
- spdif-out;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_out>, <&spdif_in>;
model = "imx-spdif";
status = "disabled";
};
vin-supply = <&v_5v0>;
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "Integrated SPDIF";
/* IMX6 doesn't implement this yet */
- spdif-controller = <&spdif>;
- spdif-out;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_out>;
};
gpio-keys {
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x4001b0b0 /* EMMY_EN */
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x4001b0b0 /* EMMY_CFG1# */
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
};
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "On-board SPDIF";
/* IMX6 doesn't implement this yet */
- spdif-controller = <&spdif>;
- spdif-out;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_out>;
};
};
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B1
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B1
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
>;
};
- pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
+ pinctrl_usdhc4_100mhz: usdhc4-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170B1
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100B1
>;
};
- pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
+ pinctrl_usdhc4_200mhz: usdhc4-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170F9
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100F9
&i2c1 {
lm75: temperature-sensor@49 {
- compatible = "national,lm75";
+ compatible = "national,lm75a";
reg = <0x49>;
vs-supply = <®_mba6_3p3v>;
};
&i2c3 {
lm75: temperature-sensor@49 {
- compatible = "national,lm75";
+ compatible = "national,lm75a";
reg = <0x49>;
vs-supply = <®_mba6_3p3v>;
};
reg = <0x68>;
};
};
-
-&iomuxc {
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
- MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
- >;
- };
-};
"AIN2R", "Line In Jack";
};
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-sabreauto-spdif",
"fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif>;
- spdif-in;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_in>;
};
backlight {
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
>;
};
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
- >;
- };
-
- pinctrl_i2c3_recovery: i2c3recoverygrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
- MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
- >;
- };
-
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
reg = <0x08>;
};
- sensor@48 {
- compatible = "national,lm75";
+ temperature-sensor@48 {
+ compatible = "national,lm75a";
reg = <0x48>;
vs-supply = <®_3p3v>;
};
reg = <0x08>;
};
- sensor@48 {
- compatible = "national,lm75";
+ temperature-sensor@48 {
+ compatible = "national,lm75a";
reg = <0x48>;
vs-supply = <®_3p3v>;
};
vcc-supply = <®_3p3v>;
};
};
+
+&iomuxc {
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+ >;
+ };
+
+ pinctrl_i2c3_recovery: i2c3recoverygrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+ >;
+ };
+};
>;
};
- pinctrl_disp0_1: disp0grp-1 {
+ pinctrl_disp0_1: disp0-1-grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
>;
};
- pinctrl_disp0_2: disp0grp-2 {
+ pinctrl_disp0_2: disp0-2-grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170F9
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100F9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhzgrp {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhzgrp {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
mux-ext-port = <3>;
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif>;
- spdif-out;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_out>;
};
reg_1p5v: regulator-1p5v {
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
fsl,pins = <
MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
fsl,pins = <
MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
fsl,pins = <
MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9
MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
fsl,pins = <
MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9
MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9
MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9
MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9
"AIN2R", "Line In Jack";
};
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif>;
- spdif-in;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_in>;
};
};
};
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx6sx-sdb-spdif",
"fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif>;
- spdif-out;
+ audio-cpu = <&spdif>;
+ audio-codec = <&spdif_out>;
};
};
};
};
+&clks {
+ assigned-clocks = <&clks IMX6SX_CLK_ENET_REF>;
+ assigned-clock-rates = <50000000>;
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
>;
};
- pinctrl_ecspi3_master: ecspi3grp1 {
+ pinctrl_ecspi3_master: ecspi3-1-grp {
fsl,pins = <
MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0
MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0
>;
};
- pinctrl_ecspi3_slave: ecspi3grp2 {
+ pinctrl_ecspi3_slave: ecspi3-2-grp {
fsl,pins = <
MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0
MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0
>;
};
- pinctrl_ecspi1_master: ecspi1grp1 {
+ pinctrl_ecspi1_master: ecspi1-1-grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0
MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0
>;
};
- pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
+ pinctrl_lcdif_dat0_17: lcdifdat0-17-grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
>;
};
- pinctrl_lcdif_clken: lcdifctrlgrp1 {
+ pinctrl_lcdif_clken: lcdifctrl-1-grp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
>;
};
- pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
+ pinctrl_lcdif_hvsync: lcdifctrl-2-grp {
fsl,pins = <
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
>;
};
- pinctrl_sai2_sleep: sai2grp-sleep {
+ pinctrl_sai2_sleep: sai2-sleep-grp {
fsl,pins = <
MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000
MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000
>;
};
- pinctrl_uart2_4wires: uart2grp-4wires {
+ pinctrl_uart2_4wires: uart2-4wires-grp {
fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
>;
};
- pinctrl_uart3_2wires: uart3grp-2wires {
+ pinctrl_uart3_2wires: uart3-2wires-grp {
fsl,pins = <
MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
>;
};
- pinctrl_usdhc1_sleep: usdhc1grp-sleep {
+ pinctrl_usdhc1_sleep: usdhc1-sleep-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x3000
MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x3000
>;
};
- pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
+ pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-sleep-grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x3000
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3000
};
pinctrl_tsc: tscgrp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
>;
};
- pinctrl_usbotg1: usbotg1 {
+ pinctrl_usbotg1: usbotg1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0
>;
>;
};
- pinctrl_usb_otg1_vbus: usb-otg1-vbus {
+ pinctrl_usb_otg1_vbus: usb-otg1-vbus-grp {
fsl,pins = <
MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x79
>;
>;
};
- pinctrl_uart2_bt: uart2grp-bt {
+ pinctrl_uart2_bt: uart2-bt-grp {
fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x17059
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x17059
>;
};
- pinctrl_usdhc2_wl: usdhc2grp-wl {
+ pinctrl_usdhc2_wl: usdhc2-wl-grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x10051
MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x10061
>;
};
- pinctrl_flexcan1: flexcan1 {
+ pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
>;
};
- pinctrl_pmic: pmic {
+ pinctrl_pmic: pmicgrp {
fsl,pins = <
/* PMIC irq */
MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099
>;
};
- pinctrl_disp0_3: disp0grp-3 {
+ pinctrl_disp0_3: disp0-3-grp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */
};
&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- pinctrl_hog: hoggrp {
- };
-
pinctrl_led: ledgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0b0b0 /* LED */
>;
};
- pinctrl_disp0_1: disp0grp-1 {
+ pinctrl_disp0_1: disp0-1-grp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */
>;
};
- pinctrl_disp0_2: disp0grp-2 {
+ pinctrl_disp0_2: disp0-2-grp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */
>;
};
- pinctrl_etnphy0_int: etnphy-intgrp-0 {
+ pinctrl_etnphy0_int: etnphy-int-0-grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 /* ETN PHY INT */
>;
};
- pinctrl_etnphy0_rst: etnphy-rstgrp-0 {
+ pinctrl_etnphy0_rst: etnphy-rst-0-grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 /* ETN PHY RESET */
>;
};
- pinctrl_etnphy1_int: etnphy-intgrp-1 {
+ pinctrl_etnphy1_int: etnphy-int-1-grp {
fsl,pins = <
MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x0b0b0 /* ETN PHY INT */
>;
};
- pinctrl_etnphy1_rst: etnphy-rstgrp-1 {
+ pinctrl_etnphy1_rst: etnphy-rst-1-grp {
fsl,pins = <
MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0b0b0 /* ETN PHY RESET */
>;
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
fsl,pins = <
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
fsl,pins = <
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
>;
};
- pinctrl_reg_vmmc: usdhc1regvmmc {
+ pinctrl_reg_vmmc: usdhc1regvmmc-grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059
>;
};
pinctrl_uart1: uart1grp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1
};
pinctrl_uart3: uart3grp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1
};
pinctrl_uart4: uart4grp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1
MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
>;
};
pinctrl_usb_otg1_id: usbotg1idgrp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
>;
};
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
>;
};
- pinctrl_usdhc1_cd: usdhc1cd {
+ pinctrl_usdhc1_cd: usdhc1cd-grp {
fsl,pins = <
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059
>;
>;
};
- pinctrl_reg_vqmmc: usdhc1regvqmmc {
+ pinctrl_reg_vqmmc: usdhc1regvqmmcgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x17059
>;
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
fsl,pins = <
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
fsl,pins = <
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
};
&iomuxc {
- pinctrl_gpmi_nand: gpmi-nand {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
>;
};
- pinctrl_lvds_transceiver: lvdstx {
+ pinctrl_lvds_transceiver: lvdstxgrp {
fsl,pins = <
MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */
MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */
};
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+ <&adc2 0>, <&adc2 1>, <&adc2 2>, <&adc2 3>;
+ };
+
reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-fixed";
regulator-name = "VCC3V3_SD1";
&i2c1 {
lm75: temperature-sensor@49 {
- compatible = "national,lm75";
+ compatible = "national,lm75a";
reg = <0x49>;
vs-supply = <®_vcc_3v3>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
- pinctrl_hog_1: hoggrp-1 {
+ pinctrl_hog_1: hoggrp {
fsl,pins = <
MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d
MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog_2>;
- pinctrl_hog_2: hoggrp-2 {
+ pinctrl_hog_2: hoggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x7d
MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d
>;
};
- pinctrl_can1: can1frp {
+ pinctrl_can1: can1frpgrp {
fsl,pins = <
MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x59
MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x59
>;
};
- pinctrl_can2: can2frp {
+ pinctrl_can2: can2frpgrp {
fsl,pins = <
MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x59
MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x59
>;
};
- pinctrl_pwm1: pwm1 {
+ pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
>;
};
- pinctrl_pwm2: pwm2 {
+ pinctrl_pwm2: pwm2grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f
>;
};
- pinctrl_pwm3: pwm3 {
+ pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f
>;
>;
};
- pinctrl_usbotg1_pwr: usbotg_pwr {
+ pinctrl_usbotg1_pwr: usbotgpwrgrp {
fsl,pins = <
MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14
>;
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
fsl,pins = <
MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
fsl,pins = <
MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
};
&iomuxc {
- imx7d-sdb {
- pinctrl_tsc2046_pendown: tsc2046_pendown {
- fsl,pins = <
- MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59
- >;
- };
-
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
- >;
- };
-
- pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
- fsl,pins = <
- MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
- >;
- };
+ pinctrl_tsc2046_pendown: tsc2046-pendowngrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
+ >;
+ };
+
+ pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
+ fsl,pins = <
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
+ >;
};
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- imx7d-sdb {
- pinctrl_brcm_reg: brcmreggrp {
- fsl,pins = <
- MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14
- >;
- };
+ pinctrl_brcm_reg: brcmreggrp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14
+ >;
+ };
- pinctrl_ecspi3: ecspi3grp {
- fsl,pins = <
- MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2
- MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2
- MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2
- MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59
- >;
- };
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2
+ MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2
+ MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2
+ MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59
+ >;
+ };
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
- MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
- MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
- MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
- MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
- MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
- MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
- MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
- MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
- MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
- MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
- MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
- MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
- MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
- >;
- };
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
+ MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+ >;
+ };
- pinctrl_enet2: enet2grp {
- fsl,pins = <
- MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
- MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
- MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
- MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
- MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
- MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
- MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
- MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
- MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
- MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
- MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
- MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
- >;
- };
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
+ MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
+ MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
+ MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
+ MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
+ MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
+ MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
+ MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
+ MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
+ MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
+ MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
+ MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
+ >;
+ };
- pinctrl_enet2_reg: enet2reggrp {
- fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14
- >;
- };
+ pinctrl_enet2_reg: enet2reggrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14
+ >;
+ };
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
- MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
- >;
- };
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
+ >;
+ };
- pinctrl_flexcan2_reg: flexcan2reggrp {
- fsl,pins = <
- MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */
- >;
- };
+ pinctrl_flexcan2_reg: flexcan2reggrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */
+ >;
+ };
- pinctrl_gpio_keys: gpio_keysgrp {
- fsl,pins = <
- MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59
- MX7D_PAD_SD2_WP__GPIO5_IO10 0x59
- >;
- };
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59
+ MX7D_PAD_SD2_WP__GPIO5_IO10 0x59
+ >;
+ };
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
- MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */
- >;
- };
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
- MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
- MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
- MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
- >;
- };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
- pinctrl_i2c4: i2c4grp {
- fsl,pins = <
- MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
- MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
- >;
- };
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
+ MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
+ >;
+ };
- pinctrl_lcdif: lcdifgrp {
- fsl,pins = <
- MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
- MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
- MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
- MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
- MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
- MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
- MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
- MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
- MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
- MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
- MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
- MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
- MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
- MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
- MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
- MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
- MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
- MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
- MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
- MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
- MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
- MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
- MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
- MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
- MX7D_PAD_LCD_CLK__LCD_CLK 0x79
- MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
- MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
- MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
- MX7D_PAD_LCD_RESET__LCD_RESET 0x79
- >;
- };
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX7D_PAD_LCD_RESET__LCD_RESET 0x79
+ >;
+ };
- pinctrl_sai1: sai1grp {
- fsl,pins = <
- MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
- MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
- MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
- MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
- MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
- >;
- };
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
- pinctrl_sai2: sai2grp {
- fsl,pins = <
- MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f
- MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f
- MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30
- MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f
- >;
- };
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f
+ MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f
+ MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30
+ MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f
+ >;
+ };
- pinctrl_sai3: sai3grp {
- fsl,pins = <
- MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f
- MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f
- MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30
- >;
- };
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f
+ MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f
+ MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30
+ >;
+ };
- pinctrl_spi4: spi4grp {
- fsl,pins = <
- MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
- MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
- MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
- >;
- };
+ pinctrl_spi4: spi4grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
+ MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
+ >;
+ };
- pinctrl_tsc2046_pendown: tsc2046_pendown {
- fsl,pins = <
- MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59
- >;
- };
+ pinctrl_tsc2046_pendown: tsc2046-pendowngrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
- MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79
- MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79
- MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79
- MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79
- >;
- };
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79
+ MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79
+ MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79
+ MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79
+ >;
+ };
- pinctrl_uart6: uart6grp {
- fsl,pins = <
- MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
- MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
- MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
- MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
- >;
- };
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
+ MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
+ MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
+ MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
+ >;
+ };
- pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
- fsl,pins = <
- MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
- MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
- MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */
- MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */
- >;
- };
+ pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */
+ MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */
+ >;
+ };
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX7D_PAD_SD1_CMD__SD1_CMD 0x59
- MX7D_PAD_SD1_CLK__SD1_CLK 0x19
- MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
- MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
- MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
- MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
- >;
- };
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ >;
+ };
- pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
- fsl,pins = <
- MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
- MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
- MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
- MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
- MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
- MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
- >;
- };
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
+ >;
+ };
- pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
- fsl,pins = <
- MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
- MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
- MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
- MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
- MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
- MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
- >;
- };
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ >;
+ };
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX7D_PAD_SD2_CMD__SD2_CMD 0x59
- MX7D_PAD_SD2_CLK__SD2_CLK 0x19
- MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
- MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
- MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
- MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
- >;
- };
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ >;
+ };
- pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
- fsl,pins = <
- MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
- MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
- MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
- MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
- MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
- MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
- >;
- };
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
+ >;
+ };
- pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
- fsl,pins = <
- MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
- MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
- MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
- MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
- MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
- MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
- >;
- };
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
+ >;
+ };
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX7D_PAD_SD3_CMD__SD3_CMD 0x59
- MX7D_PAD_SD3_CLK__SD3_CLK 0x19
- MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
- MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
- MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
- MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
- MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
- MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
- MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
- MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
- MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
- >;
- };
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
+ >;
+ };
- pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
- fsl,pins = <
- MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
- MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
- MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
- MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
- MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
- MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
- MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
- MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
- MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
- MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
- MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
- >;
- };
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
+ >;
+ };
- pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
- fsl,pins = <
- MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
- MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
- MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
- MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
- MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
- MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
- MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
- MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
- MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
- MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
- MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
- >;
- };
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
+ >;
};
};
>;
};
- pinctrl_sai3_mclk: sai3grp_mclk {
+ pinctrl_sai3_mclk: sai3-mclk-grp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x1f
>;
&iomuxc_lpsr {
pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
- fsl,phy = <
+ fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x08
>;
};
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
>;
};
- pinctrl_uart6dte: uart6dte {
+ pinctrl_uart6dte: uart6dtegrp {
fsl,pins = <
MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1
MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9
reg = <0x1d>;
};
- lm75@48 {
- compatible = "nxp,lm75";
+ temperature-sensor@48 {
+ compatible = "national,lm75b";
reg = <0x48>;
};
clock-frequency = <400000>;
sensor@49 {
- compatible = "lm75";
+ compatible = "national,lm75";
reg = <0x49>;
};
};
apb@80000000 {
- apbh@80000000 {
+ apbh-bus@80000000 {
nand-controller@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
};
};
- apbx@80040000 {
+ apbx-bus@80040000 {
lradc@80050000 {
status = "okay";
fsl,lradc-touchscreen-wires = <4>;
};
apb@80000000 {
- apbh@80000000 {
+ apbh-bus@80000000 {
ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
};
};
- apbx@80040000 {
+ apbx-bus@80040000 {
lradc@80050000 {
status = "okay";
};
};
apb@80000000 {
- apbh@80000000 {
+ apbh-bus@80000000 {
ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
};
};
- apbx@80040000 {
+ apbx-bus@80040000 {
pwm: pwm@80064000 {
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pins_a>;
};
apb@80000000 {
- apbh@80000000 {
+ apbh-bus@80000000 {
ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
};
};
- apbx@80040000 {
+ apbx-bus@80040000 {
auart0: serial@8006c000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_pins_a>;
};
apb@80000000 {
- apbh@80000000 {
+ apbh-bus@80000000 {
ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
};
};
- apbx@80040000 {
+ apbx-bus@80040000 {
i2c: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins_a>;
reg = <0x80000000 0x80000>;
ranges;
- apbh@80000000 {
+ apbh-bus@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
- apbx@80040000 {
+ apbx-bus@80040000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x04000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
apb@80000000 {
- apbh@80000000 {
+ apbh-bus@80000000 {
pinctrl@80018000 {
usb_pins_cfa10037: usb-10037@0 {
reg = <0>;
};
};
- apbx@80040000 {
+ apbx-bus@80040000 {
usbphy1: usbphy@8007e000 {
status = "okay";
};
status = "okay";
};
-&saif0 {
- pinctrl-names = "default";
- pinctrl-0 = <&saif0_pins_a>;
- #sound-dai-cells = <0>;
- assigned-clocks = <&clks 53>;
- assigned-clock-rates = <12000000>;
- status = "okay";
-};
-
-&saif1 {
- pinctrl-names = "default";
- pinctrl-0 = <&saif1_pins_a>;
- fsl,saif-master = <&saif0>;
- #sound-dai-cells = <0>;
- status = "okay";
-};
-
&spi3_pins_a {
fsl,pinmux-ids = <
MX28_PAD_AUART2_RX__SSP3_D4
flash@0 {
compatible = "jedec,spi-nor";
- spi-max-frequency = <40000000>;
+ spi-max-frequency = <20000000>;
reg = <0>;
partitions {
reg = <0x90000 0x10000>;
};
- partition@100000 {
- label = "kernel";
- reg = <0x100000 0x400000>;
+ partition@a0000 {
+ label = "rescue";
+ reg = <0xa0000 0xf40000>;
+ };
+
+ partition@fe0000 {
+ /* 1st sector for SPL boot img source data */
+ label = "spl-boot-data1";
+ reg = <0xfe0000 0x10000>;
};
- partition@500000 {
- label = "swupdate";
- reg = <0x500000 0x800000>;
+ partition@ff0000 {
+ /* 2nd sector for SPL boot img source data */
+ label = "spl-boot-data2";
+ reg = <0xff0000 0x10000>;
};
};
};
&saif0 {
pinctrl-names = "default";
pinctrl-0 = <&saif0_pins_b>;
- fsl,saif-master;
status = "okay";
};
&saif1 {
pinctrl-names = "default";
pinctrl-0 = <&saif1_pins_a>;
+ fsl,saif-master = <&saif0>;
status = "okay";
};
reg = <0x80000000 0x80000>;
ranges;
- apbh@80000000 {
+ apbh-bus@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
- apbx@80040000 {
+ apbx-bus@80040000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
- pwrkey@800 {
- compatible = "qcom,pm8941-pwrkey";
+ pon@800 {
+ compatible = "qcom,pm8941-pon";
reg = <0x800>;
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
};
pma8084_gpios: gpio@c000 {
&gsbi1_i2c {
status = "okay";
clock-frequency = <200000>;
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
eeprom@52 {
compatible = "atmel,24c128";
&gsbi3_i2c {
clock-frequency = <200000>;
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-names = "default";
status = "okay";
trackpad@10 {
};
&tlmm_pinmux {
- card_detect: card_detect {
- mux {
- pins = "gpio26";
- function = "gpio";
- bias-disable;
- };
+ card_detect: card-detect-state {
+ pins = "gpio26";
+ function = "gpio";
+ bias-disable;
};
- pcie_pins: pcie_pinmux {
- mux {
- pins = "gpio27";
- function = "gpio";
- };
- conf {
- pins = "gpio27";
- drive-strength = <12>;
- bias-disable;
- };
+ pcie_pins: pcie-state {
+ pins = "gpio27";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-disable;
};
};
};
&tlmm_pinmux {
- card_detect: card_detect {
- mux {
- pins = "gpio26";
- function = "gpio";
- bias-disable;
- };
+ card_detect: card-detect-state {
+ pins = "gpio26";
+ function = "gpio";
+ bias-disable;
};
- pcie_pins: pcie_pinmux {
- mux {
- pins = "gpio27";
- function = "gpio";
- };
- conf {
- pins = "gpio27";
- drive-strength = <12>;
- bias-disable;
- };
+ pcie_pins: pcie-state {
+ pins = "gpio27";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-disable;
};
};
// SPDX-License-Identifier: GPL-2.0
&tlmm_pinmux {
- sdc4_gpios: sdc4-gpios {
- pios {
- pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
- function = "sdc4";
- };
- };
-
- sdcc1_pins: sdcc1-pin-active {
- clk {
+ sdcc1_default_state: sdcc1-default-state {
+ clk-pins {
pins = "sdc1_clk";
- drive-strengh = <16>;
+ drive-strength = <16>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "sdc1_cmd";
- drive-strengh = <10>;
+ drive-strength = <10>;
bias-pull-up;
};
- data {
+ data-pins {
pins = "sdc1_data";
- drive-strengh = <10>;
+ drive-strength = <10>;
bias-pull-up;
};
};
- sdcc3_pins: sdcc3-pin-active {
- clk {
+ sdcc3_default_state: sdcc3-default-state {
+ clk-pins {
pins = "sdc3_clk";
- drive-strengh = <8>;
+ drive-strength = <8>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "sdc3_cmd";
- drive-strengh = <8>;
+ drive-strength = <8>;
bias-pull-up;
};
- data {
+ data-pins {
pins = "sdc3_data";
- drive-strengh = <8>;
+ drive-strength = <8>;
bias-pull-up;
};
};
- ps_hold: ps_hold {
- mux {
- pins = "gpio78";
- function = "ps_hold";
- };
+ sdc4_default_state: sdc4-default-state {
+ pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+ function = "sdc4";
};
- i2c1_pins: i2c1 {
- mux {
- pins = "gpio20", "gpio21";
- function = "gsbi1";
- };
+ gsbi1_uart_2pins: gsbi1-uart-2pins-state {
+ pins = "gpio18", "gpio19";
+ function = "gsbi1";
+ };
- pinconf {
- pins = "gpio20", "gpio21";
- drive-strength = <16>;
- bias-disable;
- };
+ gsbi1_uart_4pins: gsbi1-uart-4pins-state {
+ pins = "gpio18", "gpio19", "gpio20", "gpio21";
+ function = "gsbi1";
};
- i2c1_pins_sleep: i2c1_pins_sleep {
- mux {
- pins = "gpio20", "gpio21";
- function = "gpio";
- };
- pinconf {
- pins = "gpio20", "gpio21";
+ gsbi4_uart_pin_a: gsbi4-uart-pin-active-state {
+ rx-pins {
+ pins = "gpio11";
+ function = "gsbi4";
drive-strength = <2>;
bias-disable;
};
- };
- gsbi1_uart_2pins: gsbi1_uart_2pins {
- mux {
- pins = "gpio18", "gpio19";
- function = "gsbi1";
+ tx-pins {
+ pins = "gpio10";
+ function = "gsbi4";
+ drive-strength = <4>;
+ bias-disable;
};
};
- gsbi1_uart_4pins: gsbi1_uart_4pins {
- mux {
- pins = "gpio18", "gpio19", "gpio20", "gpio21";
- function = "gsbi1";
- };
+ gsbi6_uart_2pins: gsbi6-uart-2pins-state {
+ pins = "gpio14", "gpio15";
+ function = "gsbi6";
};
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio24", "gpio25";
- function = "gsbi2";
- };
-
- pinconf {
- pins = "gpio24", "gpio25";
- drive-strength = <16>;
- bias-disable;
- };
+ gsbi6_uart_4pins: gsbi6-uart-4pins-state {
+ pins = "gpio14", "gpio15", "gpio16", "gpio17";
+ function = "gsbi6";
};
- i2c2_pins_sleep: i2c2_pins_sleep {
- mux {
- pins = "gpio24", "gpio25";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio24", "gpio25";
- drive-strength = <2>;
- bias-disable;
- };
+ gsbi7_uart_2pins: gsbi7-uart-2pins-state {
+ pins = "gpio82", "gpio83";
+ function = "gsbi7";
};
- i2c3_pins: i2c3 {
- mux {
- pins = "gpio8", "gpio9";
- function = "gsbi3";
- };
-
- pinconf {
- pins = "gpio8", "gpio9";
- drive-strength = <16>;
- bias-disable;
- };
+ gsbi7_uart_4pins: gsbi7_uart_4pins-state {
+ pins = "gpio82", "gpio83", "gpio84", "gpio85";
+ function = "gsbi7";
};
- i2c3_pins_sleep: i2c3_pins_sleep {
- mux {
- pins = "gpio8", "gpio9";
- function = "gpio";
- };
- pinconf {
- pins = "gpio8", "gpio9";
- drive-strength = <2>;
- bias-disable;
- };
+ i2c1_default_state: i2c1-default-state {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ drive-strength = <16>;
+ bias-disable;
};
- i2c4_pins: i2c4 {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- };
-
- pinconf {
- pins = "gpio12", "gpio13";
- drive-strength = <16>;
- bias-disable;
- };
+ i2c1_sleep_state: i2c1-sleep-state {
+ pins = "gpio20", "gpio21";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- i2c4_pins_sleep: i2c4_pins_sleep {
- mux {
- pins = "gpio12", "gpio13";
- function = "gpio";
- };
- pinconf {
- pins = "gpio12", "gpio13";
- drive-strength = <2>;
- bias-disable;
- };
+ i2c2_default_state: i2c2-default-state {
+ pins = "gpio24", "gpio25";
+ function = "gsbi2";
+ drive-strength = <16>;
+ bias-disable;
};
- spi5_default: spi5_default {
- pinmux {
- pins = "gpio51", "gpio52", "gpio54";
- function = "gsbi5";
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio53";
- };
-
- pinconf {
- pins = "gpio51", "gpio52", "gpio54";
- drive-strength = <16>;
- bias-disable;
- };
-
- pinconf_cs {
- pins = "gpio53";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
+ i2c2_sleep_state: i2c2-sleep-state {
+ pins = "gpio24", "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- spi5_sleep: spi5_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio51", "gpio52", "gpio53", "gpio54";
- };
-
- pinconf {
- pins = "gpio51", "gpio52", "gpio53", "gpio54";
- drive-strength = <2>;
- bias-pull-down;
- };
+ i2c3_default_state: i2c3-default-state {
+ pins = "gpio8", "gpio9";
+ function = "gsbi3";
+ drive-strength = <16>;
+ bias-disable;
};
- i2c6_pins: i2c6 {
- mux {
- pins = "gpio16", "gpio17";
- function = "gsbi6";
- };
-
- pinconf {
- pins = "gpio16", "gpio17";
- drive-strength = <16>;
- bias-disable;
- };
+ i2c3_sleep_state: i2c3-sleep-state {
+ pins = "gpio8", "gpio9";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- i2c6_pins_sleep: i2c6_pins_sleep {
- mux {
- pins = "gpio16", "gpio17";
- function = "gpio";
- };
- pinconf {
- pins = "gpio16", "gpio17";
- drive-strength = <2>;
- bias-disable;
- };
+ i2c4_default_state: i2c4-default-state {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <16>;
+ bias-disable;
};
- gsbi4_uart_pin_a: gsbi4-uart-pin-active-state {
- rx-pins {
- pins = "gpio11";
- function = "gsbi4";
- drive-strength = <2>;
- bias-disable;
- };
-
- tx-pins {
- pins = "gpio10";
- function = "gsbi4";
- drive-strength = <4>;
- bias-disable;
- };
+ i2c4_sleep_state: i2c4-sleep-state {
+ pins = "gpio12", "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- gsbi6_uart_2pins: gsbi6_uart_2pins {
- mux {
- pins = "gpio14", "gpio15";
- function = "gsbi6";
- };
+ i2c6_default_state: i2c6-default-state {
+ pins = "gpio16", "gpio17";
+ function = "gsbi6";
+ drive-strength = <16>;
+ bias-disable;
};
- gsbi6_uart_4pins: gsbi6_uart_4pins {
- mux {
- pins = "gpio14", "gpio15", "gpio16", "gpio17";
- function = "gsbi6";
- };
+ i2c6_sleep_state: i2c6-sleep-state {
+ pins = "gpio16", "gpio17";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- gsbi7_uart_2pins: gsbi7_uart_2pins {
- mux {
- pins = "gpio82", "gpio83";
- function = "gsbi7";
- };
+ i2c7_default_state: i2c7-default-state {
+ pins = "gpio84", "gpio85";
+ function = "gsbi7";
+ drive-strength = <16>;
+ bias-disable;
};
- gsbi7_uart_4pins: gsbi7_uart_4pins {
- mux {
- pins = "gpio82", "gpio83", "gpio84", "gpio85";
- function = "gsbi7";
- };
+ i2c7_sleep_state: i2c7-sleep-state {
+ pins = "gpio84", "gpio85";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- i2c7_pins: i2c7 {
- mux {
- pins = "gpio84", "gpio85";
- function = "gsbi7";
+ spi5_default_state: spi5-default-state {
+ spi5-pins {
+ pins = "gpio51", "gpio52", "gpio54";
+ function = "gsbi5";
+ drive-strength = <16>;
+ bias-disable;
};
- pinconf {
- pins = "gpio84", "gpio85";
+ spi5-cs-pins {
+ pins = "gpio53";
+ function = "gpio";
drive-strength = <16>;
bias-disable;
+ output-high;
};
};
- i2c7_pins_sleep: i2c7_pins_sleep {
- mux {
- pins = "gpio84", "gpio85";
+ spi5_sleep_state: spi5-sleep-state {
+ spi5-pins {
+ pins = "gpio51", "gpio52", "gpio53", "gpio54";
function = "gpio";
- };
- pinconf {
- pins = "gpio84", "gpio85";
drive-strength = <2>;
- bias-disable;
+ bias-pull-down;
};
};
- riva_fm_pin_a: riva-fm-active {
+ riva_fm_pin_a: riva-fm-active-state {
pins = "gpio14", "gpio15";
function = "riva_fm";
};
- riva_bt_pin_a: riva-bt-active {
+ riva_bt_pin_a: riva-bt-active-state {
pins = "gpio16", "gpio17";
function = "riva_bt";
};
- riva_wlan_pin_a: riva-wlan-active {
+ riva_wlan_pin_a: riva-wlan-active-state {
pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
function = "riva_wlan";
bias-pull-down;
};
- hdmi_pinctrl: hdmi-pinctrl {
- mux {
- pins = "gpio70", "gpio71", "gpio72";
- function = "hdmi";
- };
-
- pinconf_ddc {
+ hdmi_pinctrl: hdmi-pinctrl-state {
+ ddc-pins {
pins = "gpio70", "gpio71";
+ function = "hdmi";
bias-pull-up;
drive-strength = <2>;
};
- pinconf_hpd {
+ hpd-pins {
pins = "gpio72";
+ function = "hdmi";
bias-pull-down;
drive-strength = <16>;
};
};
+
+ ps_hold_default_state: ps-hold-default-state {
+ pins = "gpio78";
+ function = "ps_hold";
+ };
};
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
+ pinctrl-0 = <&sdcc3_default_state>, <&sdcc3_cd_pin_a>;
status = "okay";
};
&tlmm_pinmux {
- gsbi5_uart_pin_a: gsbi5-uart-pin-active {
- rx {
+ gsbi5_uart_pin_a: gsbi5-uart-pin-active-state {
+ rx-pins {
pins = "gpio52";
function = "gsbi5";
drive-strength = <2>;
bias-pull-up;
};
- tx {
+ tx-pins {
pins = "gpio51";
function = "gsbi5";
drive-strength = <4>;
};
- sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+ sdcc3_cd_pin_a: sdcc3-cd-pin-active-state {
pins = "gpio26";
function = "gpio";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&ps_hold>;
+ pinctrl-0 = <&ps_hold_default_state>;
};
sfpb_wrapper_mutex: syscon@1200000 {
gsbi1_i2c: i2c@12460000 {
compatible = "qcom,i2c-qup-v1.1.1";
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-1 = <&i2c1_pins_sleep>;
+ pinctrl-0 = <&i2c1_default_state>;
+ pinctrl-1 = <&i2c1_sleep_state>;
pinctrl-names = "default", "sleep";
reg = <0x12460000 0x1000>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
gsbi2_i2c: i2c@124a0000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x124a0000 0x1000>;
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-1 = <&i2c2_pins_sleep>;
+ pinctrl-0 = <&i2c2_default_state>;
+ pinctrl-1 = <&i2c2_sleep_state>;
pinctrl-names = "default", "sleep";
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
ranges;
gsbi3_i2c: i2c@16280000 {
compatible = "qcom,i2c-qup-v1.1.1";
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-1 = <&i2c3_pins_sleep>;
+ pinctrl-0 = <&i2c3_default_state>;
+ pinctrl-1 = <&i2c3_sleep_state>;
pinctrl-names = "default", "sleep";
reg = <0x16280000 0x1000>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
gsbi4_i2c: i2c@16380000 {
compatible = "qcom,i2c-qup-v1.1.1";
- pinctrl-0 = <&i2c4_pins>;
- pinctrl-1 = <&i2c4_pins_sleep>;
+ pinctrl-0 = <&i2c4_default_state>;
+ pinctrl-1 = <&i2c4_sleep_state>;
pinctrl-names = "default", "sleep";
reg = <0x16380000 0x1000>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
compatible = "qcom,spi-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-0 = <&spi5_default>;
- pinctrl-1 = <&spi5_sleep>;
+ pinctrl-0 = <&spi5_default_state>;
+ pinctrl-1 = <&spi5_sleep_state>;
pinctrl-names = "default", "sleep";
clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
gsbi6_i2c: i2c@16580000 {
compatible = "qcom,i2c-qup-v1.1.1";
- pinctrl-0 = <&i2c6_pins>;
- pinctrl-1 = <&i2c6_pins_sleep>;
+ pinctrl-0 = <&i2c6_default_state>;
+ pinctrl-1 = <&i2c6_sleep_state>;
pinctrl-names = "default", "sleep";
reg = <0x16580000 0x1000>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
gsbi7_i2c: i2c@16680000 {
compatible = "qcom,i2c-qup-v1.1.1";
- pinctrl-0 = <&i2c7_pins>;
- pinctrl-1 = <&i2c7_pins_sleep>;
+ pinctrl-0 = <&i2c7_default_state>;
+ pinctrl-1 = <&i2c7_sleep_state>;
pinctrl-names = "default", "sleep";
reg = <0x16680000 0x1000>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
compatible = "qcom,apq8064-sata-phy";
status = "disabled";
reg = <0x1b400000 0x200>;
- reg-names = "phy_mem";
clocks = <&gcc SATA_PHY_CFG_CLK>;
clock-names = "cfg";
#phy-cells = <0>;
<&gcc SATA_PMALIVE_CLK>;
clock-names = "slave_iface",
"iface",
- "bus",
+ "core",
"rxoob",
- "core_pmalive";
+ "pmalive";
assigned-clocks = <&gcc SATA_RXOOB_CLK>,
<&gcc SATA_PMALIVE_CLK>;
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
- pinctrl-0 = <&sdc4_gpios>;
+ pinctrl-0 = <&sdc4_default_state>;
};
sdcc4bam: dma-controller@121c2000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
pinctrl-names = "default";
- pinctrl-0 = <&sdcc1_pins>;
+ pinctrl-0 = <&sdcc1_default_state>;
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
qcom,smd-edge = <15>;
rpm-requests {
- compatible = "qcom,rpm-apq8084";
+ compatible = "qcom,rpm-apq8084", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
regulators-0 {
};
&tlmm {
- i2c0_pins: i2c0_pinmux {
- mux_i2c {
- function = "blsp_i2c0";
- pins = "gpio58", "gpio59";
- drive-strength = <16>;
- bias-disable;
- };
+ i2c0_pins: i2c0-state {
+ function = "blsp_i2c0";
+ pins = "gpio58", "gpio59";
+ drive-strength = <16>;
+ bias-disable;
};
- mdio_pins: mdio_pinmux {
- mux_mdio {
+ mdio_pins: mdio-state {
+ mdio-pins {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
- mux_mdc {
+ mdc-pins {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
- serial0_pins: serial0_pinmux {
- mux_uart {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
+ serial0_pins: serial0-state {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
};
- spi0_pins: spi0_pinmux {
- mux_spi {
+ spi0_pins: spi0-state {
+ spi0-pins {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
- mux_cs {
+ spi0-cs-pins {
function = "gpio";
pins = "gpio54", "gpio4";
drive-strength = <2>;
};
&tlmm {
- mdio_pins: mdio_pinmux {
- pinmux_1 {
+ mdio_pins: mdio-state {
+ mdio-pins {
pins = "gpio53";
function = "mdio";
+ bias-pull-up;
};
- pinmux_2 {
+ mdc-pins {
pins = "gpio52";
function = "mdc";
- };
-
- pinconf {
- pins = "gpio52", "gpio53";
bias-pull-up;
};
};
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
+ serial_pins: serial-state{
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
};
- spi_0_pins: spi_0_pinmux {
- pin {
+ spi_0_pins: spi-0-state {
+ spi0-pins {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
- pin_cs {
+ spi0-cs-pins {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
};
&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
+ serial_pins: serial-state {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
};
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio54";
- };
- pinconf {
+ spi_0_pins: spi-0-state {
+ spi0-pins {
pins = "gpio55", "gpio56", "gpio57";
+ function = "blsp_spi0";
drive-strength = <12>;
bias-disable;
};
- pinconf_cs {
+ spi0-cs-pins {
pins = "gpio54";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
output-high;
soc {
pinctrl@1000000 {
- serial_0_pins: serial0-pinmux {
+ serial_0_pins: serial0-state {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
- serial_1_pins: serial1-pinmux {
+ serial_1_pins: serial1-state {
pins = "gpio8", "gpio9",
"gpio10", "gpio11";
function = "blsp_uart1";
bias-disable;
};
- spi_0_pins: spi-0-pinmux {
- pinmux {
+ spi_0_pins: spi-0-state {
+ spi0-pins {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
bias-disable;
};
- pinmux_cs {
+ spi0-cs-pins {
function = "gpio";
pins = "gpio12";
bias-disable;
};
};
- i2c_0_pins: i2c-0-pinmux {
+ i2c_0_pins: i2c-0-state {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
- nand_pins: nand-pins {
+ nand_pins: nand-state {
pins = "gpio53", "gpio55", "gpio56",
"gpio57", "gpio58", "gpio59",
"gpio60", "gpio62", "gpio63",
};
pinctrl@1000000 {
- serial_1_pins: serial1-pinmux {
+ serial_1_pins: serial1-state {
pins = "gpio8", "gpio9",
"gpio10", "gpio11";
function = "blsp_uart1";
bias-disable;
};
- spi_0_pins: spi-0-pinmux {
- pinmux {
+ spi_0_pins: spi-0-state {
+ spi0-pins {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
bias-disable;
};
- pinmux_cs {
+ spio-cs-pins {
function = "gpio";
pins = "gpio12";
bias-disable;
soc {
pinctrl@1000000 {
- serial_1_pins: serial1-pinmux {
+ serial_1_pins: serial1-state {
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
soc {
pinctrl@1000000 {
- serial_0_pins: serial0-pinmux {
+ serial_0_pins: serial0-state {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
- i2c_0_pins: i2c-0-pinmux {
+ i2c_0_pins: i2c-0-state {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
- nand_pins: nand-pins {
+ nand_pins: nand-state {
pins = "gpio53", "gpio55", "gpio56",
"gpio57", "gpio58", "gpio59",
"gpio60", "gpio62", "gpio63",
soc {
pinmux@800000 {
- buttons_pins: buttons_pins {
- mux {
- pins = "gpio54", "gpio65";
- drive-strength = <2>;
- bias-pull-up;
- };
+ buttons_pins: buttons-state {
+ pins = "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
};
};
};
&qcom_pinmux {
- buttons_pins: buttons_pins {
- mux {
- pins = "gpio66";
- drive-strength = <16>;
- bias-disable;
- };
+ buttons_pins: buttons-state {
+ pins = "gpio66";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
};
- leds_pins: leds_pins {
- mux {
- pins = "gpio33";
- drive-strength = <16>;
- bias-disable;
- };
+ leds_pins: leds-state {
+ pins = "gpio33";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
};
- mdio1_pins: mdio1_pins {
- mux {
- pins = "gpio10", "gpio11";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
+ mdio1_pins: mdio1-state {
+ pins = "gpio10", "gpio11";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
};
- sw0_reset_pin: sw0_reset_pin {
- mux {
- pins = "gpio16";
- drive-strength = <16>;
- function = "gpio";
- bias-disable;
- input-disable;
- };
+ sw0_reset_pin: sw0-reset-state {
+ pins = "gpio16";
+ drive-strength = <16>;
+ function = "gpio";
+ bias-disable;
+ input-disable;
};
- sw1_reset_pin: sw1_reset_pin {
- mux {
- pins = "gpio17";
- drive-strength = <16>;
- function = "gpio";
- bias-disable;
- input-disable;
- };
+ sw1_reset_pin: sw1-reset-state {
+ pins = "gpio17";
+ drive-strength = <16>;
+ function = "gpio";
+ bias-disable;
+ input-disable;
};
- usb1_pwr_en_pins: usb1_pwr_en_pins {
- mux {
- pins = "gpio4";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
+ usb1_pwr_en_pins: usb1-pwr-en-state {
+ pins = "gpio4";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
};
};
#interrupt-cells = <2>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- pcie0_pins: pcie0_pinmux {
- mux {
- pins = "gpio3";
- function = "pcie1_rst";
- drive-strength = <12>;
- bias-disable;
- };
+ pcie0_pins: pcie0-state {
+ pins = "gpio3";
+ function = "pcie1_rst";
+ drive-strength = <12>;
+ bias-disable;
};
- pcie1_pins: pcie1_pinmux {
- mux {
- pins = "gpio48";
- function = "pcie2_rst";
- drive-strength = <12>;
- bias-disable;
- };
+ pcie1_pins: pcie1-state {
+ pins = "gpio48";
+ function = "pcie2_rst";
+ drive-strength = <12>;
+ bias-disable;
};
- pcie2_pins: pcie2_pinmux {
- mux {
- pins = "gpio63";
- function = "pcie3_rst";
- drive-strength = <12>;
- bias-disable;
- };
+ pcie2_pins: pcie2-state {
+ pins = "gpio63";
+ function = "pcie3_rst";
+ drive-strength = <12>;
+ bias-disable;
};
- i2c4_pins: i2c4-default {
+ i2c4_pins: i2c4-state {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- drive-strength = <10>;
- bias-none;
- };
+ spi_pins: spi-state {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-disable;
};
- leds_pins: leds_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9",
- "gpio26", "gpio53";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- output-low;
- };
+ leds_pins: leds-state {
+ pins = "gpio7", "gpio8", "gpio9",
+ "gpio26", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-low;
};
- buttons_pins: buttons_pins {
- mux {
- pins = "gpio54";
- drive-strength = <2>;
- bias-pull-up;
- };
+ buttons_pins: buttons-state {
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-pull-up;
};
- nand_pins: nand_pins {
- mux {
+ nand_pins: nand-state {
+ nand-pins {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
bias-disable;
};
- pullups {
+ nand-pullup-pins {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
- hold {
+ nand-hold-pins {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
};
};
- mdio0_pins: mdio0-pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "mdio";
- drive-strength = <8>;
- bias-disable;
- };
+ mdio0_pins: mdio0-state {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-disable;
};
- rgmii2_pins: rgmii2-pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29",
- "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59",
- "gpio60", "gpio61", "gpio62";
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
+ rgmii2_pins: rgmii2-state {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
};
};
<&gcc SATA_A_CLK>,
<&gcc SATA_RXOOB_CLK>,
<&gcc SATA_PMALIVE_CLK>;
- clock-names = "slave_face", "iface", "core",
+ clock-names = "slave_iface", "iface", "core",
"rxoob", "pmalive";
assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
};
};
+&blsp1_i2c2 {
+ status = "okay";
+
+ magnetometer: magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+
+ vdd-supply = <&pm8226_l15>;
+ vid-supply = <&pm8226_l6>;
+ };
+
+ accelerometer: accelerometer@1e {
+ compatible = "kionix,kx022-1020";
+ reg = <0x1e>;
+
+ interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8226_l15>;
+ vddio-supply = <&pm8226_l6>;
+
+ mount-matrix = "1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "1";
+ };
+};
+
&blsp1_i2c5 {
status = "okay";
#include "qcom-msm8226-microsoft-common.dtsi"
+/* This device has no magnetometer */
+/delete-node/ &magnetometer;
+
/ {
model = "Nokia Lumia 630";
compatible = "microsoft,moneypenny", "qcom,msm8226";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <1>;
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
+ #cooling-cells = <2>;
};
CPU1: cpu@1 {
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
+ #cooling-cells = <2>;
};
CPU2: cpu@2 {
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2>;
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
+ #cooling-cells = <2>;
};
CPU3: cpu@3 {
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2>;
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
+ #cooling-cells = <2>;
};
L2: l2-cache {
reg = <0x0 0x0>;
};
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ };
+
+ opp-787200000 {
+ opp-hz = /bits/ 64 <787200000>;
+ };
+
+ /* Higher CPU frequencies need speedbin support */
+ };
+
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
+ mboxes = <&apcs 0>;
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8226";
+ compatible = "qcom,rpm-msm8226", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 10>;
+ mboxes = <&apcs 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
#interrupt-cells = <3>;
};
- apcs: syscon@f9011000 {
- compatible = "syscon";
+ apcs: mailbox@f9011000 {
+ compatible = "qcom,msm8226-apcs-kpss-global",
+ "qcom,msm8916-apcs-kpss-global", "syscon";
reg = <0xf9011000 0x1000>;
+ #mbox-cells = <1>;
+ clocks = <&a7pll>, <&gcc GPLL0_VOTE>;
+ clock-names = "pll", "aux";
+ #clock-cells = <0>;
+ };
+
+ a7pll: clock@f9016000 {
+ compatible = "qcom,msm8226-a7pll";
+ reg = <0xf9016000 0x40>;
+ #clock-cells = <0>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ operating-points-v2 = <&a7pll_opp_table>;
+
+ a7pll_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-768000000 {
+ opp-hz = /bits/ 64 <768000000>;
+ };
+
+ opp-787200000 {
+ opp-hz = /bits/ 64 <787200000>;
+ };
+
+ opp-998400000 {
+ opp-hz = /bits/ 64 <998400000>;
+ };
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ };
+
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ };
+
+ opp-1305600000 {
+ opp-hz = /bits/ 64 <1305600000>;
+ };
+
+ opp-1344000000 {
+ opp-hz = /bits/ 64 <1344000000>;
+ };
+
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ };
+
+ opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ };
+
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ };
+
+ opp-1689600000 {
+ opp-hz = /bits/ 64 <1689600000>;
+ };
+
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ };
+ };
};
saw_l2: power-manager@f9012000 {
#reset-cells = <1>;
#power-domain-cells = <1>;
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ clocks = <&xo_board>,
<&sleep_clk>;
clock-names = "xo",
"sleep_clk";
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 8>;
+ mboxes = <&apcs 8>;
qcom,smd-edge = <1>;
label = "lpass";
thermal-sensors = <&tsens 5>;
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
cpu_alert0: trip0 {
temperature = <75000>;
thermal-sensors = <&tsens 2>;
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
cpu_alert1: trip0 {
temperature = <75000>;
/* This device has touchscreen on i2c1 instead */
/delete-node/ &touchscreen;
+/* The magnetometer used on this device is currently unknown */
+/delete-node/ &magnetometer;
+
/ {
model = "Nokia Lumia 830";
compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226";
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8974";
+ compatible = "qcom,rpm-msm8974", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
};
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
};
};
+&reserved_memory {
+ ramoops@3e8e0000 {
+ compatible = "ramoops";
+ reg = <0x3e8e0000 0x200000>;
+
+ console-size = <0x100000>;
+ record-size = <0x10000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x80000>;
+ ecc-size = <8>;
+ };
+};
+
&remoteproc_adsp {
status = "okay";
cx-supply = <&pma8084_s2>;
&i2c2 {
status = "okay";
- rt5616: rt5616@1b {
- compatible = "rt5616";
+ rt5616: audio-codec@1b {
+ compatible = "realtek,rt5616";
reg = <0x1b>;
clocks = <&cru SCLK_I2S_OUT>;
clock-names = "mclk";
};
};
- acodec: acodec-ana@20030000 {
- compatible = "rk3036-codec";
+ acodec: audio-codec@20030000 {
+ compatible = "rockchip,rk3036-codec";
reg = <0x20030000 0x4000>;
- rockchip,grf = <&grf>;
clock-names = "acodec_pclk";
clocks = <&cru PCLK_ACODEC>;
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
status = "disabled";
};
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI>;
clock-names = "pclk";
- rockchip,grf = <&grf>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_ctl>;
#sound-dai-cells = <0>;
};
spi: spi@20074000 {
- compatible = "rockchip,rockchip-spi";
+ compatible = "rockchip,rk3036-spi";
reg = <0x20074000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
- clock-names = "apb-pclk","spi_pclk";
+ clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+ clock-names = "spiclk", "apb_pclk";
dmas = <&pdma 8>, <&pdma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default";
};
};
+ vpu: video-codec@10106000 {
+ compatible = "rockchip,rk3128-vpu", "rockchip,rk3066-vpu";
+ reg = <0x10106000 0x800>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vepu", "vdpu";
+ clocks = <&cru ACLK_VDPU>, <&cru HCLK_VDPU>,
+ <&cru ACLK_VEPU>, <&cru HCLK_VEPU>;
+ clock-names = "aclk_vdpu", "hclk_vdpu",
+ "aclk_vepu", "hclk_vepu";
+ iommus = <&vpu_mmu>;
+ power-domains = <&power RK3128_PD_VIDEO>;
+ };
+
+ vpu_mmu: iommu@10106800 {
+ compatible = "rockchip,iommu";
+ reg = <0x10106800 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VEPU>, <&cru HCLK_VDPU>;
+ clock-names = "aclk", "iface";
+ power-domains = <&power RK3128_PD_VIDEO>;
+ #iommu-cells = <0>;
+ };
+
vop: vop@1010e000 {
compatible = "rockchip,rk3126-vop";
reg = <0x1010e000 0x300>;
compatible = "rockchip,sfc";
reg = <0x1020c000 0x8000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_SFC>, <&cru 479>;
+ clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
clock-names = "clk_sfc", "hclk_sfc";
status = "disabled";
};
pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>;
status = "okay";
- dh2228fv: dac@0 {
- compatible = "rohm,dh2228fv";
+ display: display@0 {
+ compatible = "elgin,jg10309-01";
reg = <0>;
spi-max-frequency = <24000000>;
spi-cpha;
<0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>;
};
};
+ i2c3 {
+ /omit-if-no-ref/
+ i2c3m0_xfer: i2c3m0-xfer {
+ rockchip,pins =
+ /* i2c3_scl_m0 */
+ <3 RK_PA4 5 &pcfg_pull_none>,
+ /* i2c3_sda_m0 */
+ <3 RK_PA5 5 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ i2c3m1_xfer: i2c3m1-xfer {
+ rockchip,pins =
+ /* i2c3_scl_m1 */
+ <2 RK_PD4 7 &pcfg_pull_none>,
+ /* i2c3_sda_m1 */
+ <2 RK_PD5 7 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ i2c3m2_xfer: i2c3m2-xfer {
+ rockchip,pins =
+ /* i2c3_scl_m2 */
+ <1 RK_PD6 3 &pcfg_pull_none>,
+ /* i2c3_sda_m2 */
+ <1 RK_PD7 3 &pcfg_pull_none>;
+ };
+ };
+ i2s0 {
+ i2s0m0_lrck_tx: i2s0m0-lrck-tx {
+ rockchip,pins =
+ /* i2s0_lrck_tx_m0 */
+ <3 RK_PD3 1 &pcfg_pull_none>;
+ };
+ i2s0m0_lrck_rx: i2s0m0-lrck-rx {
+ rockchip,pins =
+ /* i2s0_lrck_rx_m0 */
+ <3 RK_PD4 1 &pcfg_pull_none>;
+ };
+ i2s0m0_mclk: i2s0m0-mclk {
+ rockchip,pins =
+ /* i2s0_mclk_m0 */
+ <3 RK_PD2 1 &pcfg_pull_none>;
+ };
+ i2s0m0_sclk_rx: i2s0m0-sclk-rx {
+ rockchip,pins =
+ /* i2s0_sclk_rx_m0 */
+ <3 RK_PD1 1 &pcfg_pull_none>;
+ };
+ i2s0m0_sclk_tx: i2s0m0-sclk-tx {
+ rockchip,pins =
+ /* i2s0_sclk_tx_m0 */
+ <3 RK_PD0 1 &pcfg_pull_none>;
+ };
+ i2s0m0_sdi0: i2s0m0-sdi0 {
+ rockchip,pins =
+ /* i2s0_sdi0_m0 */
+ <3 RK_PD6 1 &pcfg_pull_none>;
+ };
+ i2s0m0_sdo0: i2s0m0-sdo0 {
+ rockchip,pins =
+ /* i2s0_sdo0_m0 */
+ <3 RK_PD5 1 &pcfg_pull_none>;
+ };
+ i2s0m0_sdo1_sdi3: i2s0m0-sdo1-sdi3 {
+ rockchip,pins =
+ /* i2s0_sdo1_sdi3_m0 */
+ <3 RK_PD7 1 &pcfg_pull_none>;
+ };
+ i2s0m0_sdo2_sdi2: i2s0m0-sdo2-sdi2 {
+ rockchip,pins =
+ /* i2s0_sdo2_sdi2_m0 */
+ <4 RK_PA0 1 &pcfg_pull_none>;
+ };
+ i2s0m0_sdo3_sdi1: i2s0m0-sdo3-sdi1 {
+ rockchip,pins =
+ /* i2s0_sdo3_sdi1_m0 */
+ <4 RK_PA1 1 &pcfg_pull_none>;
+ };
+ i2s0m1_lrck_tx: i2s0m1-lrck-tx {
+ rockchip,pins =
+ /* i2s0_lrck_tx_m1 */
+ <3 RK_PA5 3 &pcfg_pull_none>;
+ };
+ i2s0m1_lrck_rx: i2s0m1-lrck-rx {
+ rockchip,pins =
+ /* i2s0_lrck_rx_m1 */
+ <3 RK_PB2 3 &pcfg_pull_none>;
+ };
+ i2s0m1_mclk: i2s0m1-mclk {
+ rockchip,pins =
+ /* i2s0_mclk_m1 */
+ <3 RK_PB0 3 &pcfg_pull_none>;
+ };
+ i2s0m1_sclk_rx: i2s0m1-sclk-rx {
+ rockchip,pins =
+ /* i2s0_sclk_rx_m1 */
+ <3 RK_PB1 3 &pcfg_pull_none>;
+ };
+ i2s0m1_sclk_tx: i2s0m1-sclk-tx {
+ rockchip,pins =
+ /* i2s0_sclk_tx_m1 */
+ <3 RK_PA4 3 &pcfg_pull_none>;
+ };
+ i2s0m1_sdi0: i2s0m1-sdi0 {
+ rockchip,pins =
+ /* i2s0_sdi0_m1 */
+ <3 RK_PA7 3 &pcfg_pull_none>;
+ };
+ i2s0m1_sdo0: i2s0m1-sdo0 {
+ rockchip,pins =
+ /* i2s0_sdo0_m1 */
+ <3 RK_PA6 3 &pcfg_pull_none>;
+ };
+ i2s0m1_sdo1_sdi3: i2s0m1-sdo1-sdi3 {
+ rockchip,pins =
+ /* i2s0_sdo1_sdi3_m1 */
+ <3 RK_PB3 3 &pcfg_pull_none>;
+ };
+ i2s0m1_sdo2_sdi2: i2s0m1-sdo2-sdi2 {
+ rockchip,pins =
+ /* i2s0_sdo2_sdi2_m1 */
+ <3 RK_PB4 3 &pcfg_pull_none>;
+ };
+ i2s0m1_sdo3_sdi1: i2s0m1-sdo3-sdi1 {
+ rockchip,pins =
+ /* i2s0_sdo3_sdi1_m1 */
+ <3 RK_PB5 3 &pcfg_pull_none>;
+ };
+ };
+ pwm0 {
+ /omit-if-no-ref/
+ pwm0m0_pins: pwm0m0-pins {
+ rockchip,pins =
+ /* pwm0_pin_m0 */
+ <0 RK_PB6 3 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ pwm0m1_pins: pwm0m1-pins {
+ rockchip,pins =
+ /* pwm0_pin_m1 */
+ <2 RK_PB3 5 &pcfg_pull_none>;
+ };
+ };
+ pwm1 {
+ /omit-if-no-ref/
+ pwm1m0_pins: pwm1m0-pins {
+ rockchip,pins =
+ /* pwm1_pin_m0 */
+ <0 RK_PB7 3 &pcfg_pull_none>;
+ };
+ };
pwm2 {
/omit-if-no-ref/
pwm2m0_pins: pwm2m0-pins {
/* pwm2_pin_m0 */
<0 RK_PC0 3 &pcfg_pull_none>;
};
+ /omit-if-no-ref/
+ pwm2m1_pins: pwm2m1-pins {
+ rockchip,pins =
+ /* pwm2_pin_m1 */
+ <2 RK_PB1 5 &pcfg_pull_none>;
+ };
+ };
+ pwm3 {
+ /omit-if-no-ref/
+ pwm3m0_pins: pwm3m0-pins {
+ rockchip,pins =
+ /* pwm3_pin_m0 */
+ <0 RK_PC1 3 &pcfg_pull_none>;
+ };
+ };
+ pwm4 {
+ /omit-if-no-ref/
+ pwm4m0_pins: pwm4m0-pins {
+ rockchip,pins =
+ /* pwm4_pin_m0 */
+ <0 RK_PC2 3 &pcfg_pull_none>;
+ };
+ };
+ pwm5 {
+ /omit-if-no-ref/
+ pwm5m0_pins: pwm5m0-pins {
+ rockchip,pins =
+ /* pwm5_pin_m0 */
+ <0 RK_PC3 3 &pcfg_pull_none>;
+ };
+ };
+ pwm6 {
+ /omit-if-no-ref/
+ pwm6m0_pins: pwm6m0-pins {
+ rockchip,pins =
+ /* pwm6_pin_m0 */
+ <0 RK_PB2 3 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ pwm6m1_pins: pwm6m1-pins {
+ rockchip,pins =
+ /* pwm6_pin_m1 */
+ <2 RK_PD4 5 &pcfg_pull_none>;
+ };
+ };
+ pwm7 {
+ /omit-if-no-ref/
+ pwm7m0_pins: pwm7m0-pins {
+ rockchip,pins =
+ /* pwm7_pin_m0 */
+ <0 RK_PB1 3 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ pwm7m1_pins: pwm7m1-pins {
+ rockchip,pins =
+ /* pwm7_pin_m1 */
+ <3 RK_PA0 5 &pcfg_pull_none>;
+ };
+ };
+ pwm8 {
+ /omit-if-no-ref/
+ pwm8m0_pins: pwm8m0-pins {
+ rockchip,pins =
+ /* pwm8_pin_m0 */
+ <3 RK_PA4 6 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ pwm8m1_pins: pwm8m1-pins {
+ rockchip,pins =
+ /* pwm8_pin_m1 */
+ <2 RK_PD7 5 &pcfg_pull_none>;
+ };
+ };
+ pwm9 {
+ /omit-if-no-ref/
+ pwm9m0_pins: pwm9m0-pins {
+ rockchip,pins =
+ /* pwm9_pin_m0 */
+ <3 RK_PA5 6 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ pwm9m1_pins: pwm9m1-pins {
+ rockchip,pins =
+ /* pwm9_pin_m1 */
+ <2 RK_PD6 5 &pcfg_pull_none>;
+ };
+ };
+ pwm10 {
+ /omit-if-no-ref/
+ pwm10m0_pins: pwm10m0-pins {
+ rockchip,pins =
+ /* pwm10_pin_m0 */
+ <3 RK_PA6 6 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ pwm10m1_pins: pwm10m1-pins {
+ rockchip,pins =
+ /* pwm10_pin_m1 */
+ <2 RK_PD5 5 &pcfg_pull_none>;
+ };
};
pwm11 {
/omit-if-no-ref/
/* pwm11_pin_m0 */
<3 RK_PA7 6 &pcfg_pull_none>;
};
+ /omit-if-no-ref/
+ pwm11m1_pins: pwm11m1-pins {
+ rockchip,pins =
+ /* pwm11_pin_m1 */
+ <3 RK_PA1 5 &pcfg_pull_none>;
+ };
};
rgmii {
/omit-if-no-ref/
aliases {
i2c0 = &i2c0;
i2c2 = &i2c2;
+ i2c3 = &i2c3;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
status = "disabled";
};
+ pwm0: pwm@ff430000 {
+ compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+ reg = <0xff430000 0x10>;
+ clock-names = "pwm", "pclk";
+ clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0m0_pins>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@ff430010 {
+ compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+ reg = <0xff430010 0x10>;
+ clock-names = "pwm", "pclk";
+ clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1m0_pins>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
pwm2: pwm@ff430020 {
compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
reg = <0xff430020 0x10>;
status = "disabled";
};
+ pwm3: pwm@ff430030 {
+ compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+ reg = <0xff430030 0x10>;
+ clock-names = "pwm", "pclk";
+ clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3m0_pins>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@ff440000 {
+ compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+ reg = <0xff440000 0x10>;
+ clock-names = "pwm", "pclk";
+ clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4m0_pins>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@ff440010 {
+ compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+ reg = <0xff440010 0x10>;
+ clock-names = "pwm", "pclk";
+ clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm5m0_pins>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@ff440020 {
+ compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+ reg = <0xff440020 0x10>;
+ clock-names = "pwm", "pclk";
+ clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm6m0_pins>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm7: pwm@ff440030 {
+ compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+ reg = <0xff440030 0x10>;
+ clock-names = "pwm", "pclk";
+ clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7m0_pins>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
pmucru: clock-controller@ff480000 {
compatible = "rockchip,rv1126-pmucru";
reg = <0xff480000 0x1000>;
clock-names = "apb_pclk";
};
+ i2c3: i2c@ff520000 {
+ compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+ reg = <0xff520000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m0_xfer>;
+ rockchip,grf = <&pmugrf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm8: pwm@ff550000 {
+ compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+ reg = <0xff550000 0x10>;
+ clock-names = "pwm", "pclk";
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ pinctrl-0 = <&pwm8m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm9: pwm@ff550010 {
+ compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+ reg = <0xff550010 0x10>;
+ clock-names = "pwm", "pclk";
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ pinctrl-0 = <&pwm9m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm10: pwm@ff550020 {
+ compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+ reg = <0xff550020 0x10>;
+ clock-names = "pwm", "pclk";
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ pinctrl-0 = <&pwm10m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
pwm11: pwm@ff550030 {
compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
reg = <0xff550030 0x10>;
clock-names = "pclk", "timer";
};
+ i2s0: i2s@ff800000 {
+ compatible = "rockchip,rv1126-i2s-tdm";
+ reg = <0xff800000 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru MCLK_I2S0_TX>, <&cru MCLK_I2S0_RX>, <&cru HCLK_I2S0>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ dmas = <&dmac 20>, <&dmac 19>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0m0_sclk_tx>,
+ <&i2s0m0_sclk_rx>,
+ <&i2s0m0_mclk>,
+ <&i2s0m0_lrck_tx>,
+ <&i2s0m0_lrck_rx>,
+ <&i2s0m0_sdi0>,
+ <&i2s0m0_sdo0>,
+ <&i2s0m0_sdo1_sdi3>,
+ <&i2s0m0_sdo2_sdi2>,
+ <&i2s0m0_sdo3_sdi1>;
+ resets = <&cru SRST_I2S0_TX_M>, <&cru SRST_I2S0_RX_M>;
+ reset-names = "tx-m", "rx-m";
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
vop: vop@ffb00000 {
compatible = "rockchip,rv1126-vop";
reg = <0xffb00000 0x200>, <0xffb00a00 0x400>;
/omit-if-no-ref/
eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 {
pins1 {
+ pinmux = <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+ <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+
+ pins2 {
pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
<STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
<STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
<STM32_PINMUX('E', 5, ANALOG)>, /* ETH_RGMII_TXD3 */
<STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
<STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_GTX_CLK */
- <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
- <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */
<STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
<STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
<STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD1 */
/omit-if-no-ref/
eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 {
pins1 {
+ pinmux = <STM32_PINMUX('B', 6, AF11)>, /* ETH_MDIO */
+ <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+
+ pins2 {
pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */
<STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */
<STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */
<STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */
<STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */
<STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */
- <STM32_PINMUX('B', 6, ANALOG)>, /* ETH_MDIO */
- <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
<STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
<STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
<STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
};
ðernet1 {
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <ðernet_mac1_address>;
phy-handle = <ðphy1>;
phy-mode = "rgmii-id";
pinctrl-0 = <ð1_rgmii_pins_a>;
interrupt-parent = <&gpiog>;
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
reg = <1>;
+ realtek,clkout-disable;
reset-assert-us = <15000>;
reset-deassert-us = <55000>;
reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_WAN;
+ linux,default-trigger = "netdev";
+ };
+ };
};
};
};
ðernet2 {
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <ðernet_mac2_address>;
phy-handle = <ðphy2>;
phy-mode = "rgmii-id";
pinctrl-0 = <ð2_rgmii_pins_a>;
interrupt-parent = <&gpiog>;
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
reg = <1>;
+ realtek,clkout-disable;
reset-assert-us = <15000>;
reset-deassert-us = <55000>;
reset-gpios = <&gpiog 8 GPIO_ACTIVE_LOW>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
};
};
};
<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
<STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
<STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
};
};
};
};
-&pwm5_pins_a {
- pins {
- pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
- };
+&{pwm5_pins_a/pins} {
+ pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
};
-&pwm5_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
- };
+&{pwm5_sleep_pins_a/pins} {
+ pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
};
&timers5 {
status = "okay";
};
-&sdmmc2_b4_od_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
- };
+&{sdmmc2_b4_od_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
};
-&sdmmc2_b4_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
- <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
- };
+&{sdmmc2_b4_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
};
-&sdmmc2_b4_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
- <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
- <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
- };
+&{sdmmc2_b4_sleep_pins_a/pins} {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
};
-&sdmmc2_d47_pins_a {
- pins {
- pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
- <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
- <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
- };
+&{sdmmc2_d47_pins_a/pins} {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
};
-&sdmmc2_d47_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
- <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
- <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
- };
+&{sdmmc2_d47_sleep_pins_a/pins} {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
};
&sdmmc3 {
};
};
-&sdmmc3_b4_od_pins_b {
- pins1 {
- pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
- <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
- <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
- <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
- };
+&{sdmmc3_b4_od_pins_b/pins1} {
+ pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
};
-&sdmmc3_b4_pins_b {
- pins1 {
- pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
- <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
- <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
- <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
- <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
- };
+&{sdmmc3_b4_pins_b/pins1} {
+ pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
};
-&sdmmc3_b4_sleep_pins_b {
- pins {
- pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
- <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
- <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
- <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
- <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
- <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
- };
+&{sdmmc3_b4_sleep_pins_b/pins} {
+ pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+ <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
};
&spi1 {
status = "okay";
};
-ðernet0_rmii_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
- <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
- <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
- };
- pins2 {
- pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
- <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
- <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */
- <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
- };
+&{ethernet0_rmii_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
};
-ðernet0_rmii_sleep_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
- <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
- <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
- <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
- <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
- <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
- <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
- };
+&{ethernet0_rmii_pins_a/pins2} {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+};
+
+&{ethernet0_rmii_sleep_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
};
&iwdg2 {
};
};
-&qspi_bk1_pins_a {
- pins1 {
- bias-pull-up;
- drive-push-pull;
- slew-rate = <1>;
- };
+&{qspi_bk1_pins_a/pins} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
};
&rng1 {
status = "okay";
};
-&sdmmc1_b4_od_pins_a {
- pins1 {
- bias-pull-up;
- };
- pins2 {
- bias-pull-up;
- };
+&{sdmmc1_b4_od_pins_a/pins1} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
};
-&sdmmc1_b4_pins_a {
- pins1 {
- bias-pull-up;
- };
- pins2 {
- bias-pull-up;
- };
+&{sdmmc1_b4_od_pins_a/pins2} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+};
+
+&{sdmmc1_b4_pins_a/pins1} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+};
+
+&{sdmmc1_b4_pins_a/pins2} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
};
&uart4 {
status = "okay";
};
-&uart4_idle_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-pull-up;
- };
+&{uart4_idle_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
};
-&uart4_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-pull-up;
- };
+&{uart4_idle_pins_a/pins2} {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ /delete-property/ bias-disable;
+ bias-pull-up;
};
-&uart4_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
- <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
- };
+&{uart4_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+ slew-rate = <0>;
+};
+
+&{uart4_pins_a/pins2} {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ /delete-property/ bias-disable;
+ bias-pull-up;
+};
+
+&{uart4_sleep_pins_a/pins} {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
+ <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
};
&usbh_ehci {
};
};
-&i2c1_pins_a {
- pins {
- pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
- <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
- };
+&{i2c1_pins_a/pins} {
+ pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
};
-&i2c1_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
- <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
- };
+&{i2c1_sleep_pins_a/pins} {
+ pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
};
&mdio0 {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include "stm32mp15x-mecio1-io.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Protonic MECIO1r0";
+ compatible = "prt,mecio1r0", "st,stm32mp151";
+
+ led {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ gpios = <&gpioa 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+ðernet0 {
+ assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL3_Q>;
+ assigned-clock-parents = <&rcc PLL3_Q>;
+ assigned-clock-rates = <125000000>; /* Clock PLL3 to 625Mhz in tf-a. */
+ st,eth-clk-sel;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Protonic MECT1S";
+ compatible = "prt,mect1s", "st,stm32mp151";
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ aliases {
+ serial0 = &uart4;
+ ethernet0 = ðernet0;
+ ethernet1 = ðernet1;
+ ethernet2 = ðernet2;
+ ethernet3 = ðernet3;
+ ethernet4 = ðernet4;
+ };
+
+ v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ v5v: regulator-v5v {
+ compatible = "regulator-fixed";
+ regulator-name = "v5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ led {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&clk_hse {
+ clock-frequency = <24000000>;
+};
+
+&clk_lse {
+ status = "disabled";
+};
+
+ðernet0 {
+ status = "okay";
+ pinctrl-0 = <ðernet0_rmii_pins_a>;
+ pinctrl-1 = <ðernet0_rmii_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rmii";
+ max-speed = <100>;
+ st,eth-clk-sel;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+};
+
+&{ethernet0_rmii_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */
+};
+
+&{ethernet0_rmii_pins_a/pins2} {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+};
+
+&{ethernet0_rmii_sleep_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
+};
+
+&mdio0 {
+ /* All this DP83TG720R PHYs can't be probed before switch@0 is
+ * probed so we need to use compatible with PHYid
+ */
+ /* TI DP83TG720R */
+ t1_phy0: ethernet-phy@8 {
+ compatible = "ethernet-phy-id2000.a284";
+ reg = <8>;
+ interrupts-extended = <&gpioi 5 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioh 13 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+
+ /* TI DP83TG720R */
+ t1_phy1: ethernet-phy@c {
+ compatible = "ethernet-phy-id2000.a284";
+ reg = <12>;
+ interrupts-extended = <&gpioj 0 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioh 14 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+
+ /* TI DP83TG720R */
+ t1_phy2: ethernet-phy@4 {
+ compatible = "ethernet-phy-id2000.a284";
+ reg = <4>;
+ interrupts-extended = <&gpioi 7 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+
+ /* TI DP83TG720R */
+ t1_phy3: ethernet-phy@d {
+ compatible = "ethernet-phy-id2000.a284";
+ reg = <13>;
+ interrupts-extended = <&gpioi 15 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioi 13 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <1000>;
+ };
+};
+
+&qspi {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi_clk_pins_a
+ &qspi_bk1_pins_a
+ &qspi_cs1_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a
+ &qspi_bk1_sleep_pins_a
+ &qspi_cs1_sleep_pins_a>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&{qspi_bk1_pins_a/pins} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+};
+
+&spi2 {
+ pinctrl-0 = <&spi2_pins_b>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpioj 3 GPIO_ACTIVE_LOW>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+
+ switch@0 {
+ compatible = "nxp,sja1105q";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-rx-delay-us = <1>;
+ spi-tx-delay-us = <1>;
+ spi-cpha;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet1: port@0 {
+ reg = <0>;
+ label = "t10";
+ phy-mode = "rgmii-id";
+ phy-handle = <&t1_phy0>;
+ };
+
+ ethernet2: port@1 {
+ reg = <1>;
+ label = "t11";
+ phy-mode = "rgmii-id";
+ phy-handle = <&t1_phy1>;
+ };
+
+ ethernet3: port@2 {
+ reg = <2>;
+ label = "t12";
+ phy-mode = "rgmii-id";
+ phy-handle = <&t1_phy2>;
+ };
+
+ ethernet4: port@3 {
+ reg = <3>;
+ label = "t13";
+ phy-mode = "rgmii-id";
+ phy-handle = <&t1_phy3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "cpu";
+ ethernet = <ðernet0>;
+ phy-mode = "rmii";
+
+ /* RGMII mode is not working properly, using RMII instead. */
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&usbh_ehci {
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ vbus-supply = <&v5v>;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&v3v3>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&v3v3>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include "stm32mp15x-mecio1-io.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Protonic MECIO1r1";
+ compatible = "prt,mecio1r1", "st,stm32mp153";
+
+ led {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&clk_hse {
+ clock-frequency = <24000000>;
+};
+
+&m_can1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&m_can1_pins_b>;
+ pinctrl-1 = <&m_can1_sleep_pins_b>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ aliases {
+ serial0 = &uart4;
+ ethernet0 = ðernet0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ spi4 = &spi4;
+ spi5 = &spi5;
+ spi6 = &spi6;
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xC0000000 0x10000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2@10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x1000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@10041000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10041000 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer@10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram@30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram@38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+ };
+
+ v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ v5v: regulator-v5v {
+ compatible = "regulator-fixed";
+ regulator-name = "v5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&adc {
+ /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+ pinctrl-0 = <&adc12_pins_mecsbc>;
+ pinctrl-names = "default";
+ vdd-supply = <&v3v3>;
+ vdda-supply = <&v3v3>;
+ vref-supply = <&v3v3>;
+ status = "okay";
+};
+
+&adc1 {
+ status = "okay";
+
+ channel@0 {
+ reg = <0>;
+ /* 16.5 ck_cycles sampling time */
+ st,min-sample-time-ns = <5000>;
+ label = "p24v_stp";
+ };
+
+ channel@1 {
+ reg = <1>;
+ st,min-sample-time-ns = <5000>;
+ label = "p24v_hpdcm";
+ };
+
+ channel@2 {
+ reg = <2>;
+ st,min-sample-time-ns = <5000>;
+ label = "ain0";
+ };
+
+ channel@3 {
+ reg = <3>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpdcm1_i2";
+ };
+
+ channel@5 {
+ reg = <5>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpout1_i";
+ };
+
+ channel@6 {
+ reg = <6>;
+ st,min-sample-time-ns = <5000>;
+ label = "ain1";
+ };
+
+ channel@9 {
+ reg = <9>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpout0_i";
+ };
+
+ channel@10 {
+ reg = <10>;
+ st,min-sample-time-ns = <5000>;
+ label = "phint0_ain";
+ };
+
+ channel@13 {
+ reg = <13>;
+ st,min-sample-time-ns = <5000>;
+ label = "phint1_ain";
+ };
+
+ channel@15 {
+ reg = <15>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpdcm0_i1";
+ };
+
+ channel@16 {
+ reg = <16>;
+ st,min-sample-time-ns = <5000>;
+ label = "lsin";
+ };
+
+ channel@18 {
+ reg = <18>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpdcm0_i2";
+ };
+
+ channel@19 {
+ reg = <19>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpdcm1_i1";
+ };
+};
+
+&adc2 {
+ status = "okay";
+
+ channel@2 {
+ reg = <2>;
+ /* 16.5 ck_cycles sampling time */
+ st,min-sample-time-ns = <5000>;
+ label = "ain2";
+ };
+
+ channel@6 {
+ reg = <6>;
+ st,min-sample-time-ns = <5000>;
+ label = "ain3";
+ };
+};
+
+ðernet0 {
+ status = "okay";
+ pinctrl-0 = <ðernet0_rgmii_pins_x>;
+ pinctrl-1 = <ðernet0_rgmii_sleep_pins_x>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii-id";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+ st,eth-clk-sel;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@8 {
+ reg = <8>;
+ interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpiog 10 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+ };
+};
+
+&gpiod {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "STP_RESETN", "STP_ENABLEN", "HPOUT0", "HPOUT0_ALERTN";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_d_mecsbc>;
+};
+
+&gpioe {
+ gpio-line-names = "HPOUT0_RESETN", "HPOUT1", "HPOUT1_ALERTN", "",
+ "", "", "HPOUT1_RESETN",
+ "LPOUT0", "LPOUT0_ALERTN", "GPOUT0_RESETN",
+ "LPOUT1", "LPOUT1_ALERTN", "GPOUT1_RESETN",
+ "LPOUT2", "LPOUT2_ALERTN", "GPOUT2_RESETN";
+};
+
+&gpiof {
+ gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "GPOUT3_RESETN",
+ "LPOUT4", "LPOUT4_ALERTN", "GPOUT4_RESETN",
+ "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpiog {
+ gpio-line-names = "LPOUT5", "LPOUT5_ALERTN", "", "LPOUT5_RESETN",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpioh {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "GPIO0_RESETN", "", "", "",
+ "", "", "", "";
+};
+
+&gpioi {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "HPDCM0_SLEEPN", "HPDCM1_SLEEPN", "GPIO1_RESETN", "",
+ "", "", "", "";
+};
+
+&gpioj {
+ gpio-line-names = "HSIN10", "HSIN11", "HSIN12", "HSIN13",
+ "HSIN14", "HSIN15", "", "",
+ "", "", "", "",
+ "", "RTD_RESETN", "", "";
+};
+
+&gpiok {
+ gpio-line-names = "", "", "HSIN0", "HSIN1",
+ "HSIN2", "HSIN3", "HSIN4", "HSIN5";
+};
+
+&gpioz {
+ gpio-line-names = "", "", "", "HSIN6",
+ "HSIN7", "HSIN8", "HSIN9", "";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ pinctrl-1 = <&i2c2_sleep_pins_a>;
+ status = "okay";
+
+ gpio0: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "HSIN0_BIAS", "HSIN1_BIAS", "HSIN2_BIAS", "HSIN3_BIAS",
+ "", "", "HSIN_VREF0_LVL", "HSIN_VREF1_LVL",
+ "HSIN4_BIAS", "HSIN5_BIAS", "HSIN6_BIAS", "HSIN9_BIAS",
+ "", "", "", "";
+ };
+
+ gpio1: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "HSIN8_BIAS", "HSIN9_BIAS", "HSIN10_BIAS", "HSIN11_BIAS",
+ "", "", "HSIN_VREF2_LVL", "HSIN_VREF3_LVL",
+ "HSIN12_BIAS", "HSIN13_BIAS", "HSIN14_BIAS", "HSIN15_BIAS",
+ "", "", "LSIN8_BIAS", "LSIN9_BIAS";
+ };
+};
+
+&qspi {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi_clk_pins_a
+ &qspi_bk1_pins_a
+ &qspi_cs1_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a
+ &qspi_bk1_sleep_pins_a
+ &qspi_cs1_sleep_pins_a>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <104000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&{qspi_bk1_pins_a/pins} {
+ pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+ /delete-property/ bias-disable;
+ bias-pull-up;
+};
+
+&timers1 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+
+ hpdcm0_pwm: pwm {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pwm1_pins_mecio1>;
+ pinctrl-1 = <&pwm1_sleep_pins_mecio1>;
+ status = "okay";
+ };
+};
+
+&timers8 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+
+ hpdcm1_pwm: pwm {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pwm8_pins_mecio1>;
+ pinctrl-1 = <&pwm8_sleep_pins_mecio1>;
+ status = "okay";
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&{uart4_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+};
+
+&{uart4_pins_a/pins2} {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ /delete-property/ bias-disable;
+ bias-pull-up;
+};
+
+&usbotg_hs {
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ vbus-supply = <&v5v>;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&v3v3>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&v3v3>;
+};
+
+&pinctrl {
+ adc12_pins_mecsbc: adc12-ain-mecsbc-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */
+ <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1_INP6 */
+ <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2_INP2 */
+ <STM32_PINMUX('F', 14, ANALOG)>, /* ADC2_INP6 */
+ <STM32_PINMUX('A', 0, ANALOG)>, /* ADC1_INP16 */
+ <STM32_PINMUX('A', 3, ANALOG)>, /* ADC1_INP15 */
+ <STM32_PINMUX('A', 4, ANALOG)>, /* ADC1_INP18 */
+ <STM32_PINMUX('A', 5, ANALOG)>, /* ADC1_INP19 */
+ <STM32_PINMUX('A', 6, ANALOG)>, /* ADC1_INP3 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */
+ <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */
+ <STM32_PINMUX('C', 3, ANALOG)>; /* ADC1_INP13 */
+ };
+ };
+
+ pinctrl_hog_d_mecsbc: hog-d-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, GPIO)>; /* STP_RESETn */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm1_pins_mecio1: pwm1-mecio1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
+ <STM32_PINMUX('A', 8, AF1)>; /* TIM1_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm1_sleep_pins_mecio1: pwm1-sleep-mecio1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* TIM1_CH1 */
+ <STM32_PINMUX('A', 8, ANALOG)>; /* TIM1_CH2 */
+ };
+ };
+
+ pwm8_pins_mecio1: pwm8-mecio1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, AF3)>, /* TIM8_CH1 */
+ <STM32_PINMUX('I', 6, AF3)>; /* TIM8_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_sleep_pins_mecio1: pwm8-sleep-mecio1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* TIM8_CH1 */
+ <STM32_PINMUX('I', 6, ANALOG)>; /* TIM8_CH2 */
+ };
+ };
+
+ ethernet0_rgmii_pins_x: rgmii-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('B', 13, AF11)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('B', 8, AF11)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ };
+
+ ethernet0_rgmii_sleep_pins_x: rgmii-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('B', 13, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('B', 8, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+ };
+ };
+};
sgtl5000_tx_endpoint: endpoint@0 {
reg = <0>;
remote-endpoint = <&sai2a_endpoint>;
- frame-master = <&sgtl5000_tx_endpoint>;
- bitclock-master = <&sgtl5000_tx_endpoint>;
};
sgtl5000_rx_endpoint: endpoint@1 {
reg = <1>;
remote-endpoint = <&sai2b_endpoint>;
- frame-master = <&sgtl5000_rx_endpoint>;
- bitclock-master = <&sgtl5000_rx_endpoint>;
};
};
sai2a_port: port {
sai2a_endpoint: endpoint {
remote-endpoint = <&sgtl5000_tx_endpoint>;
+ bitclock-master;
dai-format = "i2s";
- mclk-fs = <512>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <16>;
+ frame-master;
+ mclk-fs = <256>;
};
};
};
sai2b_port: port {
sai2b_endpoint: endpoint {
remote-endpoint = <&sgtl5000_rx_endpoint>;
+ bitclock-master;
dai-format = "i2s";
- mclk-fs = <512>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <16>;
+ frame-master;
+ mclk-fs = <256>;
};
};
};
reg = <0x50>;
vcc-supply = <&ldo4_reg>;
- #address-cells = <1>;
- #size-cells = <1>;
- baseboard_data: baseboard_data@0 {
- reg = <0 0x100>;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ baseboard_data: baseboard_data@0 {
+ reg = <0 0x100>;
+ };
};
};
};
cape_eeprom0: cape_eeprom0@54 {
compatible = "atmel,24c256";
reg = <0x54>;
- #address-cells = <1>;
- #size-cells = <1>;
- cape0_data: cape_data@0 {
- reg = <0 0x100>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cape0_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
};
};
cape_eeprom1: cape_eeprom1@55 {
compatible = "atmel,24c256";
reg = <0x55>;
- #address-cells = <1>;
- #size-cells = <1>;
- cape1_data: cape_data@0 {
- reg = <0 0x100>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cape1_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
};
};
cape_eeprom2: cape_eeprom2@56 {
compatible = "atmel,24c256";
reg = <0x56>;
- #address-cells = <1>;
- #size-cells = <1>;
- cape2_data: cape_data@0 {
- reg = <0 0x100>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cape2_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
};
};
cape_eeprom3: cape_eeprom3@57 {
compatible = "atmel,24c256";
reg = <0x57>;
- #address-cells = <1>;
- #size-cells = <1>;
- cape3_data: cape_data@0 {
- reg = <0 0x100>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cape3_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
};
};
};
/* Support GPIO reset on revision C3 boards */
reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
reset-assert-us = <300>;
- reset-deassert-us = <6500>;
+ reset-deassert-us = <13000>;
};
};
compatible = "atmel,24c256";
reg = <0x50>;
- #address-cells = <1>;
- #size-cells = <1>;
- baseboard_data: baseboard_data@0 {
- reg = <0 0x100>;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ baseboard_data: baseboard_data@0 {
+ reg = <0 0x100>;
+ };
};
};
};
};
temperature-sensor@48 {
- compatible = "lm75";
+ compatible = "national,lm75";
reg = <0x48>;
};
*
*/
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
/ {
model = "Phytec AM335x phyBOARD-REGOR";
compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
};
pinctrl-0 = <&uart1_rs485_pins>;
status = "okay";
linux,rs485-enabled-at-boot-time;
+ /*
+ * un-intuitively, yet with the default (active-high),
+ * am335x RTS is high on idle and gets low on active !
+ */
+ rs485-rts-active-low;
};
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound_iface_main>;
simple-audio-card,frame-master = <&sound_iface_main>;
- simple-audio-card,mclk-fs = <32>;
+ simple-audio-card,mclk-fs = <512>;
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out",
"LINE1L", "Line In",
"LINE1R", "Line In";
- simple-audio-card,cpu {
+ sound_iface_main: simple-audio-card,cpu {
sound-dai = <&mcasp0>;
};
- sound_iface_main: simple-audio-card,codec {
+ simple-audio-card,codec {
sound-dai = <&tlv320aic3007>;
- clocks = <&mcasp0_fck>;
};
};
status = "okay";
clock-frequency = <400000>;
- stlm75@49 {
+ temperature-sensor@49 {
status = "okay";
- compatible = "lm75";
+ compatible = "st,stlm75";
reg = <0x49>;
};
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 1>;
+
+ trips {
+ gpu0_crit: gpu0-crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
gpu1_thermal: gpu1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 2>;
+
+ trips {
+ gpu1_crit: gpu1-crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
};
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_vcc3v3>;
+ };
+
+ reg_gmac_2v5: gmac-2v5 {
+ /* 2V5 supply for GMAC PHY IO */
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-2v5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ vin-supply = <®_vcc3v3>;
+ };
+
+ reg_vcc5v: regulator-vcc5v {
+ /* board 5V supply from micro USB or pin headers */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
};
reg_vcc3v3: vcc3v3 {
+ /* board 3V3 supply by SY8089A */
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <®_vcc5v>;
};
vdd_cpux: gpio-regulator {
+ /* cpu voltage regulator MP2143DJ */
compatible = "regulator-gpio";
regulator-name = "vdd-cpux";
regulator-type = "voltage";
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
gpios-states = <0x1>;
states = <1100000 0>, <1300000 1>;
+ vin-supply = <®_vcc5v>;
};
wifi_pwrseq: pwrseq {
status = "okay";
};
+&pio {
+ vcc-pa-supply = <®_vcc3v3>;
+ vcc-pc-supply = <®_vcc3v3>;
+ vcc-pd-supply = <®_gmac_2v5>;
+ vcc-pf-supply = <®_vcc3v3>;
+ vcc-pg-supply = <®_vcc3v3>;
+};
+
+&r_pio {
+ vcc-pl-supply = <®_vcc3v3>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pa_pins>;
dmas = <&dma 48>, <&dma 48>;
dma-names = "rx", "tx";
resets = <&r_ccu RST_R_APB2_I2C>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
serial0 = &uart0;
};
+ battery: battery {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <1024000>;
+ voltage-max-design-microvolt = <4200000>;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
vcc-pi-supply = <®_cldo3>;
};
-&r_rsb {
+&r_i2c {
status = "okay";
- axp717: pmic@3a3 {
+ axp717: pmic@34 {
compatible = "x-powers,axp717";
- reg = <0x3a3>;
+ reg = <0x34>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&nmi_intc>;
vin3-supply = <®_vcc5v>;
vin4-supply = <®_vcc5v>;
+ axp_adc: adc {
+ compatible = "x-powers,axp717-adc";
+ #io-channel-cells = <1>;
+ };
+
+ battery_power: battery-power {
+ compatible = "x-powers,axp717-battery-power-supply";
+ monitored-battery = <&battery>;
+ };
+
regulators {
reg_dcdc1: dcdc1 {
regulator-always-on;
/* unused */
};
};
+
+ usb_power: usb-power {
+ compatible = "x-powers,axp717-usb-power-supply";
+ input-current-limit-microamp = <1500000>;
+ };
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include <dt-bindings/input/gpio-keys.h>
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+ model = "Anbernic RG35XX SP";
+ compatible = "anbernic,rg35xx-sp", "allwinner,sun50i-h700";
+
+ gpio-keys-lid {
+ compatible = "gpio-keys";
+
+ lid-switch {
+ label = "Lid Switch";
+ gpios = <&pio 4 7 GPIO_ACTIVE_LOW>; /* PE7 */
+ linux,can-disable;
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ wakeup-source;
+ };
+ };
+};
+
+&r_i2c {
+ rtc_ext: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+ watchdog@2100 {
+ compatible = "amlogic,a4-wdt", "amlogic,t7-wdt";
+ reg = <0x0 0x2100 0x0 0x10>;
+ clocks = <&xtal>;
+ };
+
uart_b: serial@7a000 {
compatible = "amlogic,a4-uart",
"amlogic,meson-s4-uart";
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
+
+ sec_ao: ao-secure@10220 {
+ compatible = "amlogic,a4-ao-secure",
+ "amlogic,meson-gx-ao-secure",
+ "syscon";
+ reg = <0x0 0x10220 0x0 0x140>;
+ amlogic,has-chip-id;
+ };
};
};
};
*/
#include "amlogic-a4-common.dtsi"
+#include <dt-bindings/power/amlogic,a5-pwrc.h>
/ {
cpus {
#address-cells = <2>;
enable-method = "psci";
};
};
+
+ sm: secure-monitor {
+ compatible = "amlogic,meson-gxbb-sm";
+
+ pwrc: power-controller {
+ compatible = "amlogic,a5-pwrc";
+ #power-domain-cells = <1>;
+ };
+ };
};
aliases {
serial0 = &uart_b;
+ spi0 = &spifc;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x10000000>;
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 9 MiB reserved for ARM Trusted Firmware */
+ secmon_reserved: secmon@7f00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x07f00000 0x0 0x900000>;
+ no-map;
+ };
+ };
+
+ main_12v: regulator-main-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_5v: regulator-vcc-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddq: regulator-vddq {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDQ";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&main_12v>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&main_12v>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddao_1v8: regulator-vddao-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ddr4_2v5: regulator-ddr4-2v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "DDR4_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_1v8: regulator-vcc-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd_1v8: regulator-vdd-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD1V8_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddio_b: regulator-vddio-3v3-b {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_B";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sdcard: regulator-sdcard {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCARD_POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&uart_b {
status = "okay";
};
+
+&nand {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x00200000>;
+ };
+ partition@200000 {
+ label = "env";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@600000 {
+ label = "system";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x01000000 0x03000000>;
+ };
+ partition@4000000 {
+ label = "media";
+ reg = <0x04000000 0x8000000>;
+ };
+ };
+};
+
+ðmac {
+ status = "okay";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
+};
+
+&spifc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&spifc_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <83000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ status = "disabled";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0 0x200000>;
+ };
+
+ partition@200000 {
+ label = "env";
+ reg = <0x200000 0x400000>;
+ };
+
+ partition@600000 {
+ label = "system";
+ reg = <0x600000 0xa00000>;
+ };
+
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x1000000 0x3000000>;
+ };
+
+ partition@4000000 {
+ label = "data";
+ reg = <0x4000000 0x8000000>;
+ };
+ };
+ };
+};
+
+&sd {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_pins>;
+ pinctrl-names = "default","clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&sdcard>;
+ vqmmc-supply = <&sdcard>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+ model = "Amlogic C308l aw419 Development Board";
+ compatible = "amlogic,aw419", "amlogic,c3";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_b;
+ spi0 = &spifc;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 9 MiB reserved for ARM Trusted Firmware */
+ secmon_reserved: secmon@7f00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x07f00000 0x0 0x900000>;
+ no-map;
+ };
+ };
+
+ main_12v: regulator-main-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_5v: regulator-vcc-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddq: regulator-vddq {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDQ";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&main_12v>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&main_12v>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddao_1v8: regulator-vddao-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ddr4_2v5: regulator-ddr4-2v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "DDR4_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_1v8: regulator-vcc-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd_1v8: regulator-vdd-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD1V8_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddio_b: regulator-vddio-3v3-b {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_B";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sdcard: regulator-sdcard {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCARD_POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&uart_b {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x00200000>;
+ };
+ partition@200000 {
+ label = "env";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@600000 {
+ label = "system";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x01000000 0x03000000>;
+ };
+ partition@4000000 {
+ label = "media";
+ reg = <0x04000000 0x8000000>;
+ };
+ };
+};
+
+ðmac {
+ status = "okay";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
+};
+
+&spifc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&spifc_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <83000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ status = "disabled";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0 0x200000>;
+ };
+
+ partition@200000 {
+ label = "env";
+ reg = <0x200000 0x400000>;
+ };
+
+ partition@600000 {
+ label = "system";
+ reg = <0x600000 0xa00000>;
+ };
+
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x1000000 0x3000000>;
+ };
+
+ partition@4000000 {
+ label = "data";
+ reg = <0x4000000 0x8000000>;
+ };
+ };
+ };
+};
+
+&sd {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_pins>;
+ pinctrl-names = "default","clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&sdcard>;
+ vqmmc-supply = <&sdcard>;
+};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/reset/amlogic,c3-reset.h>
+#include <dt-bindings/clock/amlogic,c3-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,c3-scmi-clkc.h>
+#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+#include <dt-bindings/power/amlogic,c3-pwrc.h>
+#include <dt-bindings/gpio/amlogic-c3-gpio.h>
/ {
cpus {
};
};
+ sram@7f50e00 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x07f50e00 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x07f50e00 0x100>;
+
+ scmi_shmem: sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x100>;
+ };
+ };
+
+ firmware {
+ scmi: scmi {
+ compatible = "arm,scmi-smc";
+ arm,smc-id = <0x820000C1>;
+ shmem = <&scmi_shmem>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+ clkc_periphs: clock-controller@0 {
+ compatible = "amlogic,c3-peripherals-clkc";
+ reg = <0x0 0x0 0x0 0x49c>;
+ #clock-cells = <1>;
+ clocks = <&xtal>,
+ <&scmi_clk CLKID_OSC>,
+ <&scmi_clk CLKID_FIXED_PLL_OSC>,
+ <&clkc_pll CLKID_FCLK_DIV2>,
+ <&clkc_pll CLKID_FCLK_DIV2P5>,
+ <&clkc_pll CLKID_FCLK_DIV3>,
+ <&clkc_pll CLKID_FCLK_DIV4>,
+ <&clkc_pll CLKID_FCLK_DIV5>,
+ <&clkc_pll CLKID_FCLK_DIV7>,
+ <&clkc_pll CLKID_GP0_PLL>,
+ <&scmi_clk CLKID_GP1_PLL_OSC>,
+ <&clkc_pll CLKID_HIFI_PLL>,
+ <&scmi_clk CLKID_SYS_CLK>,
+ <&scmi_clk CLKID_AXI_CLK>,
+ <&scmi_clk CLKID_SYS_PLL_DIV16>,
+ <&scmi_clk CLKID_CPU_CLK_DIV16>;
+ clock-names = "xtal_24m",
+ "oscin",
+ "fix",
+ "fdiv2",
+ "fdiv2p5",
+ "fdiv3",
+ "fdiv4",
+ "fdiv5",
+ "fdiv7",
+ "gp0",
+ "gp1",
+ "hifi",
+ "sysclk",
+ "axiclk",
+ "sysplldiv16",
+ "cpudiv16";
+ };
+
reset: reset-controller@2000 {
compatible = "amlogic,c3-reset";
reg = <0x0 0x2000 0x0 0x98>;
compatible = "amlogic,c3-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x0 0x0 0x4000 0x0 0x02de>;
- gpio: bank@4000 {
- reg = <0x0 0x4000 0x0 0x004c>,
- <0x0 0x4100 0x0 0x01de>;
+ gpio: bank@0 {
+ reg = <0x0 0x0 0x0 0x004c>,
+ <0x0 0x100 0x0 0x01de>;
reg-names = "mux", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 0 55>;
};
+
+ i2c0_pins1: i2c0-pins1 {
+ mux {
+ groups = "i2c0_sda_e",
+ "i2c0_scl_e";
+ function = "i2c0";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c0_pins2: i2c0-pins2 {
+ mux {
+ groups = "i2c0_sda_d",
+ "i2c0_scl_d";
+ function = "i2c0";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_pins1: i2c1-pins1 {
+ mux {
+ groups = "i2c1_sda_x",
+ "i2c1_scl_x";
+ function = "i2c1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_pins2: i2c1-pins2 {
+ mux {
+ groups = "i2c1_sda_d",
+ "i2c1_scl_d";
+ function = "i2c1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_pins3: i2c1-pins3 {
+ mux {
+ groups = "i2c1_sda_a",
+ "i2c1_scl_a";
+ function = "i2c1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_pins4: i2c1-pins4 {
+ mux {
+ groups = "i2c1_sda_b",
+ "i2c1_scl_b";
+ function = "i2c1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c2_pins1: i2c2-pins1 {
+ mux {
+ groups = "i2c2_sda",
+ "i2c2_scl";
+ function = "i2c2";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c3_pins1: i2c3-pins1 {
+ mux {
+ groups = "i2c3_sda_c",
+ "i2c3_scl_c";
+ function = "i2c3";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c3_pins2: i2c3-pins2 {
+ mux {
+ groups = "i2c3_sda_x",
+ "i2c3_scl_x";
+ function = "i2c3";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c3_pins3: i2c3-pins3 {
+ mux {
+ groups = "i2c3_sda_d",
+ "i2c3_scl_d";
+ function = "i2c3";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ nand_pins: nand-pins {
+ mux {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "nand_ce0",
+ "nand_ale",
+ "nand_cle",
+ "nand_wen_clk",
+ "nand_ren_wr";
+ function = "nand";
+ input-enable;
+ };
+ };
+
+ sdcard_pins: sdcard-pins {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_d1",
+ "sdcard_d2",
+ "sdcard_d3",
+ "sdcard_clk",
+ "sdcard_cmd";
+ function = "sdcard";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdcard_clk_gate_pins: sdcard-clk-cmd-pins {
+ mux {
+ groups = "GPIOC_4";
+ function = "gpio_periphs";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdio_m_clk_gate_pins: sdio-m-clk-cmd-pins {
+ mux {
+ groups = "sdio_clk";
+ function = "sdio";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdio_m_pins: sdio-m-all-pins {
+ mux {
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_clk",
+ "sdio_cmd";
+ function = "sdio";
+ input-enable;
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ spicc0_pins1: spicc0-pins1 {
+ mux {
+ groups = "spi_a_mosi_b",
+ "spi_a_miso_b",
+ "spi_a_clk_b";
+ function = "spi_a";
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ spicc0_pins2: spicc0-pins2 {
+ mux {
+ groups = "spi_a_mosi_c",
+ "spi_a_miso_c",
+ "spi_a_clk_c";
+ function = "spi_a";
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ spicc0_pins3: spicc0-pins3 {
+ mux {
+ groups = "spi_a_mosi_x",
+ "spi_a_miso_x",
+ "spi_a_clk_x";
+ function = "spi_a";
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ spicc1_pins1: spicc1-pins1 {
+ mux {
+ groups = "spi_b_mosi_d",
+ "spi_b_miso_d",
+ "spi_b_clk_d";
+ function = "spi_b";
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ spicc1_pins2: spicc1-pins2 {
+ mux {
+ groups = "spi_b_mosi_x",
+ "spi_b_miso_x",
+ "spi_b_clk_x";
+ function = "spi_b";
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ spifc_pins: spifc-pins {
+ mux {
+ groups = "spif_mo",
+ "spif_mi",
+ "spif_clk",
+ "spif_cs",
+ "spif_hold",
+ "spif_wp",
+ "spif_clk_loop";
+ function = "spif";
+ drive-strength-microamp = <4000>;
+ };
+ };
};
gpio_intc: interrupt-controller@4080 {
<10 11 12 13 14 15 16 17 18 19 20 21>;
};
+ clkc_pll: clock-controller@8000 {
+ compatible = "amlogic,c3-pll-clkc";
+ reg = <0x0 0x8000 0x0 0x1a4>;
+ #clock-cells = <1>;
+ clocks = <&scmi_clk CLKID_TOP_PLL_OSC>,
+ <&scmi_clk CLKID_MCLK_PLL_OSC>,
+ <&scmi_clk CLKID_FIXED_PLL_OSC>;
+ clock-names = "top",
+ "mclk",
+ "fix";
+ };
+
+ eth_phy: mdio-multiplexer@28000 {
+ compatible = "amlogic,g12a-mdio-mux";
+ reg = <0x0 0x28000 0x0 0xa4>;
+
+ clocks = <&clkc_periphs CLKID_SYS_ETH_PHY>,
+ <&xtal>,
+ <&clkc_pll CLKID_FCLK_50M>;
+ clock-names = "pclk", "clkin0", "clkin1";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_mdio: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ int_mdio: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ internal_ephy: ethernet_phy@8 {
+ compatible = "ethernet-phy-id0180.3301",
+ "ethernet-phy-ieee802.3-c22";
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <8>;
+ max-speed = <100>;
+ };
+ };
+ };
+
+ spicc0: spi@50000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x50000 0x0 0x44>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc_periphs CLKID_SYS_SPICC_0>,
+ <&clkc_periphs CLKID_SPICC_A>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spicc1: spi@52000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x52000 0x0 0x44>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc_periphs CLKID_SYS_SPICC_1>,
+ <&clkc_periphs CLKID_SPICC_B>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spifc: spi@56000 {
+ compatible = "amlogic,a1-spifc";
+ reg = <0x0 0x56000 0x0 0x290>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_periphs CLKID_SPIFC>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ i2c0: i2c@66000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x66000 0x0 0x24>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc_periphs CLKID_SYS_I2C_M_A>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@68000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x68000 0x0 0x24>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc_periphs CLKID_SYS_I2C_M_B>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@6a000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x6a000 0x0 0x24>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc_periphs CLKID_SYS_I2C_M_C>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@6c000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x6c000 0x0 0x24>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc_periphs CLKID_SYS_I2C_M_D>;
+ status = "disabled";
+ };
+
uart_b: serial@7a000 {
compatible = "amlogic,meson-s4-uart",
"amlogic,meson-ao-uart";
reg = <0x0 0x7a000 0x0 0x18>;
interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
- clocks = <&xtal>, <&xtal>, <&xtal>;
+ clocks = <&xtal>, <&clkc_periphs CLKID_SYS_UART_B>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
+ sec_ao: ao-secure@10220 {
+ compatible = "amlogic,c3-ao-secure",
+ "amlogic,meson-gx-ao-secure",
+ "syscon";
+ reg = <0x0 0x10220 0x0 0x140>;
+ amlogic,has-chip-id;
+ };
+
+ sdio: mmc@88000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0x88000 0x0 0x800>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&pwrc PWRC_C3_SDIOA_ID>;
+ clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>,
+ <&clkc_periphs CLKID_SD_EMMC_A>,
+ <&clkc_pll CLKID_FCLK_DIV2>;
+ clock-names = "core","clkin0", "clkin1";
+ no-mmc;
+ no-sd;
+ resets = <&reset RESET_SD_EMMC_A>;
+ status = "disabled";
+ };
+
+ sd: mmc@8a000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0x8a000 0x0 0x800>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&pwrc PWRC_C3_SDCARD_ID>;
+ clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>,
+ <&clkc_periphs CLKID_SD_EMMC_B>,
+ <&clkc_pll CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ no-mmc;
+ no-sdio;
+ resets = <&reset RESET_SD_EMMC_B>;
+ status = "disabled";
+ };
+
+ nand: nand-controller@8d000 {
+ compatible = "amlogic,meson-axg-nfc";
+ reg = <0x0 0x8d000 0x0 0x200>,
+ <0x0 0x8C000 0x0 0x4>;
+ reg-names = "nfc", "emmc";
+ interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>,
+ <&clkc_pll CLKID_FCLK_DIV2>;
+ clock-names = "core", "device";
+ status = "disabled";
+ };
+ };
+
+ ethmac: ethernet@fdc00000 {
+ compatible = "amlogic,meson-g12a-dwmac",
+ "snps,dwmac-3.70a",
+ "snps,dwmac";
+ reg = <0x0 0xfdc00000 0x0 0x10000>,
+ <0x0 0xfe024000 0x0 0x8>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ power-domains = <&pwrc PWRC_C3_ETH_ID>;
+ clocks = <&clkc_periphs CLKID_SYS_ETH_MAC>,
+ <&clkc_pll CLKID_FCLK_DIV2>,
+ <&clkc_pll CLKID_FCLK_50M>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <2048>;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
};
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
+
+ sec_ao: ao-secure@10220 {
+ compatible = "amlogic,t7-ao-secure",
+ "amlogic,meson-gx-ao-secure",
+ "syscon";
+ reg = <0x0 0x10220 0x0 0x140>;
+ amlogic,has-chip-id;
+ };
};
};
"Speaker1 Right", "SPK1 OUT_D",
"Linein AINL", "Linein",
"Linein AINR", "Linein";
+ clocks = <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_HIFI_PLL>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TODDR_B IN 1", "TDMIN_B OUT",
"TODDR_C IN 1", "TDMIN_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"Lineout", "10U2 OUTL",
"Lineout", "10U2 OUTR";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"LINPUT1", "Mic Jack",
"Mic Jack", "MICB";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_A IN 2", "FRDDR_C OUT 1",
"TDM_A Playback", "TDMOUT_A OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"Internal Speakers", "Speaker Amplifier OUTL",
"Internal Speakers", "Speaker Amplifier OUTR";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"Lineout", "U19 OUTL",
"Lineout", "U19 OUTR";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TODDR_B IN 6", "TDMIN_LB OUT",
"TODDR_C IN 6", "TDMIN_LB OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"AU2 INR", "ACODEC LORN",
"7J4-14 LEFT", "AU2 OUTL",
"7J4-11 RIGHT", "AU2 OUTR";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
"AU2 INR", "ACODEC LORN",
"Lineout", "AU2 OUTL",
"Lineout", "AU2 OUTR";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "KII-PRO";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "NANOPI-K2";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "NEXBOX-A95X";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "ODROID-C2";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "P200";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "P201";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "VEGA-S95";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "WETEK-HUB";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "WETEK-PLAY2";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
"Speaker", "9J5-2 RIGHT";
audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
"9J5-2 RIGHT", "ACODEC LORN";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
"AU2 INR", "ACODEC LORN",
"Lineout", "AU2 OUTL",
"Lineout", "AU2 OUTR";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "KHADAS-VIM";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "LIBRETECH-CC-V2";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
"AU2 INR", "ACODEC LORN",
"Lineout", "AU2 OUTL",
"Lineout", "AU2 OUTR";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
"AU2 INR", "ACODEC LORN",
"Lineout", "AU2 OUTL",
"Lineout", "AU2 OUTR";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
"AU2 INR", "ACODEC LORN",
"Lineout", "AU2 OUTL",
"Lineout", "AU2 OUTR";
+
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
};
};
-&saradc {
- compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc";
-};
-
&usb {
dr_mode = "host";
};
sound {
compatible = "amlogic,gx-sound-card";
model = "KHADAS-VIM2";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "NEXBOX-A1";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
sound {
compatible = "amlogic,gx-sound-card";
model = "RBOX-PRO";
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
"TODDR_B IN 0", "TDMIN_A OUT",
"TODDR_C IN 0", "TDMIN_A OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
<&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
<&dioo2133>;
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
no-map;
};
};
+
+ sdio_32k: sdio-32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&sdio_32k>;
+ clock-names = "ext_clock";
+ };
+
+ main_12v: regulator-main-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&main_12v>;
+ regulator-always-on;
+ };
+
+ vddio_ao1v8: regulator-vddio-ao1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ /* SY8120B1ABC DC/DC Regulator. */
+ vddcpu: regulator-vddcpu {
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU";
+ regulator-min-microvolt = <689000>;
+ regulator-max-microvolt = <1049000>;
+
+ vin-supply = <&main_12v>;
+
+ pwms = <&pwm_ij 1 1500 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ /* Voltage Duty-Cycle */
+ voltage-table = <1049000 0>,
+ <1039000 3>,
+ <1029000 6>,
+ <1019000 9>,
+ <1009000 12>,
+ <999000 14>,
+ <989000 17>,
+ <979000 20>,
+ <969000 23>,
+ <959000 26>,
+ <949000 29>,
+ <939000 31>,
+ <929000 34>,
+ <919000 37>,
+ <909000 40>,
+ <899000 43>,
+ <889000 45>,
+ <879000 48>,
+ <869000 51>,
+ <859000 54>,
+ <849000 56>,
+ <839000 59>,
+ <829000 62>,
+ <819000 65>,
+ <809000 68>,
+ <799000 70>,
+ <789000 73>,
+ <779000 76>,
+ <769000 79>,
+ <759000 81>,
+ <749000 84>,
+ <739000 87>,
+ <729000 89>,
+ <719000 92>,
+ <709000 95>,
+ <699000 98>,
+ <689000 100>;
+ };
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins1>;
+ pinctrl-names = "default";
+};
+
+&pwm_ij {
+ status = "okay";
};
&uart_b {
pinctrl-names = "default";
};
+&sdio {
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ no-sd;
+ no-mmc;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_ao1v8>;
+};
+
+&sd {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddao_3v3>;
+};
+
&nand {
status = "okay";
#address-cells = <1>;
pinctrl-0 = <&spicc0_pins_x>;
cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
};
+
+ðmac {
+ status = "okay";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
+};
#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
#include <dt-bindings/power/meson-s4-power.h>
+#include <dt-bindings/reset/amlogic,meson-s4-reset.h>
/ {
cpus {
};
};
+ sdcard_pins: sdcard-pins {
+ mux {
+ groups = "sdcard_d0_c",
+ "sdcard_d1_c",
+ "sdcard_d2_c",
+ "sdcard_d3_c",
+ "sdcard_clk_c",
+ "sdcard_cmd_c";
+ function = "sdcard";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdcard_clk_gate_pins: sdcard-clk-gate-pins {
+ mux {
+ groups = "GPIOC_4";
+ function = "gpio_periphs";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ emmc_pins: emmc-pins {
+ mux-0 {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "emmc_cmd";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ mux-1 {
+ groups = "emmc_clk";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ emmc_ds_pins: emmc-ds-pins {
+ mux {
+ groups = "emmc_nand_ds";
+ function = "emmc";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ emmc_clk_gate_pins: emmc-clk-gate-pins {
+ mux {
+ groups = "GPIOB_8";
+ function = "gpio_periphs";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdio_pins: sdio-pins {
+ mux {
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_clk",
+ "sdio_cmd";
+ function = "sdio";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdio_clk_gate_pins: sdio-clk-gate-pins {
+ mux {
+ groups = "GPIOX_4";
+ function = "gpio_periphs";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
spicc0_pins_x: spicc0-pins_x {
mux {
groups = "spi_a_mosi_x",
#reset-cells = <1>;
};
+ sec_ao: ao-secure@10220 {
+ compatible = "amlogic,s4-ao-secure",
+ "amlogic,meson-gx-ao-secure",
+ "syscon";
+ reg = <0x0 0x10220 0x0 0x140>;
+ amlogic,has-chip-id;
+ };
+
ir: ir@84040 {
compatible = "amlogic,meson-s4-ir";
reg = <0x0 0x84040 0x0 0x30>;
compatible = "snps,dwmac-mdio";
};
};
+
+ sdio: mmc@fe088000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0xfe088000 0x0 0x800>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc_periphs CLKID_SDEMMC_A>,
+ <&xtal>,
+ <&clkc_pll CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_A>;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ status = "disabled";
+ };
+
+ sd: mmc@fe08a000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0xfe08a000 0x0 0x800>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_periphs CLKID_SDEMMC_B>,
+ <&clkc_periphs CLKID_SD_EMMC_B>,
+ <&clkc_pll CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_B>;
+ status = "disabled";
+ };
+
+ emmc: mmc@fe08c000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0xfe08c000 0x0 0x800>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_periphs CLKID_NAND>,
+ <&xtal>,
+ <&clkc_pll CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_NAND_EMMC>;
+ no-sdio;
+ no-sd;
+ status = "disabled";
+ };
};
};
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"Lineout", "ACODEC LOLP",
"Lineout", "ACODEC LORP";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TODDR_B IN 1", "TDMIN_B OUT",
"TODDR_C IN 1", "TDMIN_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
compatible = "apm,xgene-mdio";
#address-cells = <1>;
#size-cells = <0>;
- menetphy: menetphy@3 {
+ menetphy: ethernet-phy@3 {
compatible = "ethernet-phy-id001c.c915";
reg = <0x3>;
};
#address-cells = <2>;
#size-cells = <2>;
- chosen { };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
aliases {
serial0 = &v2m_serial0;
#address-cells = <2>;
#size-cells = <2>;
- chosen { };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
aliases {
serial0 = &v2m_serial0;
#address-cells = <2>;
#size-cells = <2>;
- chosen { };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
aliases {
serial0 = &v2m_serial0;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "bcm2712.dtsi"
+
+/ {
+ compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
+ model = "Raspberry Pi 5";
+
+ aliases {
+ serial10 = &uart10;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial10:115200n8";
+ };
+
+ /* Will be filled by the bootloader */
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0 0 0x28000000>;
+ };
+
+ sd_io_1v8_reg: sd-io-1v8-reg {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-sd-io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-settling-time-us = <5000>;
+ gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
+ states = <1800000 1>,
+ <3300000 0>;
+ };
+
+ sd_vcc_reg: sd-vcc-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
+ * labeled "UART", i.e. the interface with the system console.
+ */
+&uart10 {
+ status = "okay";
+};
+
+/* SDIO1 is used to drive the SD card */
+&sdio1 {
+ vqmmc-supply = <&sd_io_1v8_reg>;
+ vmmc-supply = <&sd_vcc_reg>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,bcm2712";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gicv2>;
+
+ clocks {
+ /* The oscillator is the root of the clock tree. */
+ clk_osc: clk-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "osc";
+ clock-frequency = <54000000>;
+ };
+
+ clk_vpu: clk-vpu {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <750000000>;
+ clock-output-names = "vpu-clock";
+ };
+
+ clk_uart: clk-uart {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <9216000>;
+ clock-output-names = "uart-clock";
+ };
+
+ clk_emmc2: clk-emmc2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "emmc2-clock";
+ };
+ };
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Source for L1 d/i cache-line-size, cache-sets, cache-size
+ * https://developer.arm.com/documentation/100798/0401/L1-memory-system/About-the-L1-memory-system?lang=en
+ * Source for L2 cache-line-size and cache-sets:
+ * https://developer.arm.com/documentation/100798/0401/L2-memory-system/About-the-L2-memory-system?lang=en
+ * and for cache-size:
+ * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712
+ */
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x000>;
+ enable-method = "psci";
+ d-cache-size = <0x10000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ i-cache-size = <0x10000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ next-level-cache = <&l2_cache_l0>;
+
+ l2_cache_l0: l2-cache-l0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <128>;
+ cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x100>;
+ enable-method = "psci";
+ d-cache-size = <0x10000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ i-cache-size = <0x10000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ next-level-cache = <&l2_cache_l1>;
+
+ l2_cache_l1: l2-cache-l1 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <128>;
+ cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x200>;
+ enable-method = "psci";
+ d-cache-size = <0x10000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ i-cache-size = <0x10000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ next-level-cache = <&l2_cache_l2>;
+
+ l2_cache_l2: l2-cache-l2 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <128>;
+ cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x300>;
+ enable-method = "psci";
+ d-cache-size = <0x10000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ i-cache-size = <0x10000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ next-level-cache = <&l2_cache_l3>;
+
+ l2_cache_l3: l2-cache-l3 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <128>;
+ cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+ };
+
+ /* Source for cache-line-size and cache-sets:
+ * https://developer.arm.com/documentation/100453/0401/L3-cache?lang=en
+ * Source for cache-size:
+ * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712
+ */
+ l3_cache: l3-cache {
+ compatible = "cache";
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>; // 2MiB(size)/64(line-size)=32768ways/16-way set
+ cache-level = <3>;
+ cache-unified;
+ };
+ };
+
+ psci {
+ method = "smc";
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ };
+
+ rmem: reserved-memory {
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ atf@0 {
+ reg = <0x0 0x0 0x0 0x80000>;
+ no-map;
+ };
+
+ cma: linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x4000000>; /* 64MB */
+ reusable;
+ linux,cma-default;
+ alloc-ranges = <0x0 0x00000000 0x0 0x40000000>;
+ };
+ };
+
+ soc: soc@107c000000 {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x10 0x00000000 0x80000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sdio1: mmc@fff000 {
+ compatible = "brcm,bcm2712-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x00fff000 0x260>,
+ <0x00fff400 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_emmc2>;
+ clock-names = "sw_sdio";
+ mmc-ddr-3_3v;
+ };
+
+ system_timer: timer@7c003000 {
+ compatible = "brcm,bcm2835-system-timer";
+ reg = <0x7c003000 0x1000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <1000000>;
+ };
+
+ mailbox: mailbox@7c013880 {
+ compatible = "brcm,bcm2835-mbox";
+ reg = <0x7c013880 0x40>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <0>;
+ };
+
+ local_intc: interrupt-controller@7cd00000 {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x7cd00000 0x100>;
+ };
+
+ uart10: serial@7d001000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x7d001000 0x200>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_uart>, <&clk_vpu>;
+ clock-names = "uartclk", "apb_pclk";
+ arm,primecell-periphid = <0x00241011>;
+ status = "disabled";
+ };
+
+ interrupt-controller@7d517000 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d517000 0x10>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gio_aon: gpio@7d517c00 {
+ compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+ reg = <0x7d517c00 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ brcm,gpio-bank-widths = <17 6>;
+ /* The lack of 'interrupt-controller' property here is intended:
+ * don't use GIO_AON as an interrupt controller because it will
+ * clash with the firmware monitoring the PMIC interrupt via the VPU.
+ */
+ };
+
+ gicv2: interrupt-controller@7fff9000 {
+ compatible = "arm,gic-400";
+ reg = <0x7fff9000 0x1000>,
+ <0x7fffa000 0x2000>,
+ <0x7fffc000 0x2000>,
+ <0x7fffe000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
device_type = "memory";
reg = <0x0 0x80000000 0x3da00000>,
<0x0 0xc0000000 0x40000000>,
- <0x8 0x80000000 0x40000000>;
+ <0x8 0x80000000 0x80000000>;
};
gpio-keys {
"dout_fsys2_clkcmu_ethernet";
};
+ cmu_dpum: clock-controller@18c00000 {
+ compatible = "samsung,exynosautov9-cmu-dpum";
+ reg = <0x18c00000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_DPUM_BUS>;
+ clock-names = "oscclk", "bus";
+ };
+
+ sysmmu_dpum_0: sysmmu@18c80000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x18c80000 0x10000>;
+ interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D0_CLK>;
+ clock-names = "sysmmu";
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_dpum_1: sysmmu@18c90000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x18c90000 0x10000>;
+ interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D1_CLK>;
+ clock-names = "sysmmu";
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_dpum_2: sysmmu@18ca0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x18ca0000 0x10000>;
+ interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D2_CLK>;
+ clock-names = "sysmmu";
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_dpum_3: sysmmu@18cb0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x18cb0000 0x10000>;
+ interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D3_CLK>;
+ clock-names = "sysmmu";
+ #iommu-cells = <0>;
+ };
+
cmu_core: clock-controller@1b030000 {
compatible = "samsung,exynosautov9-cmu-core";
reg = <0x1b030000 0x8000>;
*
*/
+#include <dt-bindings/clock/samsung,exynosautov920.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/samsung,exynos-usi.h>
clock-output-names = "oscclk";
};
- /*
- * FIXME: Keep the stub clock for serial driver, until proper clock
- * driver is implemented.
- */
- clock_usi: clock-usi {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- clock-output-names = "usi";
- };
-
cpus: cpus {
#address-cells = <2>;
#size-cells = <0>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ cmu_peric0: clock-controller@10800000 {
+ compatible = "samsung,exynosautov920-cmu-peric0";
+ reg = <0x10800000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_PERIC0_NOC>,
+ <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
+ clock-names = "oscclk",
+ "noc",
+ "ip";
+ };
+
syscon_peric0: syscon@10820000 {
compatible = "samsung,exynosautov920-peric0-sysreg",
"syscon";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- clocks = <&clock_usi>, <&clock_usi>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
clock-names = "pclk", "ipclk";
status = "disabled";
interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_bus>;
- clocks = <&clock_usi>, <&clock_usi>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
clock-names = "uart", "clk_uart_baud0";
samsung,uart-fifosize = <256>;
status = "disabled";
interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
};
+ cmu_top: clock-controller@11000000 {
+ compatible = "samsung,exynosautov920-cmu-top";
+ reg = <0x11000000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>;
+ clock-names = "oscclk";
+ };
+
pinctrl_alive: pinctrl@11850000 {
compatible = "samsung,exynosautov920-pinctrl";
reg = <0x11850000 0x10000>;
pmu_system_controller: system-controller@17460000 {
compatible = "google,gs101-pmu", "syscon";
reg = <0x17460000 0x10000>;
+
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x3e9c>; /* PAD_CTRL_PWR_HOLD */
+ mask = <0x100>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
+ mask = <0x2>; /* SWRESET_SYSTEM */
+ value = <0x2>; /* reset value */
+ };
};
pinctrl_gpio_alive: pinctrl@174d0000 {
clock-frequency = <25000000>;
};
+ sc16is7xx_clk: clock-sc16is7xx {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
clocks = <&sc16is7xx_clk>;
interrupt-parent = <&gpio1>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-
- sc16is7xx_clk: clock-sc16is7xx {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- };
};
};
QORIQ_CLK_PLL_DIV(1)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
- big-endian;
bus-width = <4>;
status = "disabled";
};
QORIQ_CLK_PLL_DIV(1)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
- big-endian;
broken-cd;
bus-width = <4>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- num-viewport = <2>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
status = "disabled";
};
- rcpm: power-controller@1ee2140 {
+ rcpm: wakeup-controller@1ee2140 {
compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1ee2140 0x0 0x4>;
#fsl,rcpm-wakeup-cells = <1>;
cooling-levels = <1 128 192 255>;
};
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
sound {
#address-cells = <1>;
#size-cells = <0>;
clock-names = "mclk";
assigned-clocks = <&mclk>;
assigned-clock-rates = <1250000>;
+ AVDD-supply = <®_3p3v>;
+ CPVDD-supply = <®_3p3v>;
+ DBVDD-supply = <®_3p3v>;
+ DCVDD-supply = <®_3p3v>;
+ MICVDD-supply = <®_3p3v>;
};
};
};
};
- reboot {
- compatible = "syscon-reboot";
- regmap = <&rst>;
- offset = <0>;
- mask = <0x02>;
- };
-
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
its: msi-controller@6020000 {
compatible = "arm,gic-v3-its";
msi-controller;
+ #msi-cells = <1>;
reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
};
};
};
};
- rst: syscon@1e60000 {
- compatible = "syscon";
+ syscon@1e60000 {
+ compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd";
reg = <0x0 0x1e60000 0x0 0x10000>;
little-endian;
+
+ reboot {
+ compatible = "syscon-reboot";
+ offset = <0>;
+ mask = <0x02>;
+ };
};
sfp: efuse@1e80000 {
dmas = <&edma0 0 62>, <&edma0 0 60>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
- little-endian;
status = "disabled";
};
dmas = <&edma0 0 58>, <&edma0 0 56>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
- little-endian;
status = "disabled";
};
dmas = <&edma0 0 54>, <&edma0 0 2>;
dma-names = "tx", "rx";
spi-num-chipselects = <3>;
- little-endian;
status = "disabled";
};
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
reg = <0x01 0xf0000000 0x0 0x100000>;
#address-cells = <3>;
#size-cells = <2>;
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
device_type = "pci";
bus-range = <0x0 0x0>;
dma-coherent;
status = "disabled";
};
- rcpm: power-controller@1e34040 {
+ rcpm: wakeup-controller@1e34040 {
compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x1c>;
#fsl,rcpm-wakeup-cells = <7>;
enet1: ethernet@e2000 {
pcsphy-handle = <&pcsphy1>, <&qsgmiib_pcs1>;
+ pcs-handle = <&pcsphy1>, <&qsgmiib_pcs1>;
pcs-handle-names = "sgmii", "qsgmii";
};
enet4: ethernet@e8000 {
pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs2>;
+ pcs-handle = <&pcsphy4>, <&qsgmiib_pcs2>;
pcs-handle-names = "sgmii", "qsgmii";
};
enet5: ethernet@ea000 {
pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs3>;
+ pcs-handle = <&pcsphy5>, <&qsgmiib_pcs3>;
pcs-handle-names = "sgmii", "qsgmii";
};
};
&fpga {
- mdio-mux-emi1@54 {
+ mdio-mux@54 {
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio-parent-bus = <&mdio0>;
#address-cells = <1>;
clock-frequency = <0>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
- big-endian;
bus-width = <4>;
};
compatible = "fsl,qoriq-memory-controller";
reg = <0x0 0x1080000 0x0 0x1000>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- big-endian;
};
tmu: tmu@1f00000 {
#interrupt-cells = <2>;
};
- uqe: uqe@2400000 {
+ uqe: uqe-bus@2400000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe", "simple-bus";
qeic: qeic@80 {
compatible = "fsl,qe-ic";
reg = <0x80 0x80>;
- #address-cells = <0>;
interrupt-controller;
#interrupt-cells = <1>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
};
si1: si@700 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "fsl,ls1043-qe-si",
"fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
siram1: siram@1000 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "fsl,ls1043-qe-siram",
"fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
QORIQ_CLK_PLL_DIV(1)>;
};
- aux_bus: aux-bus {
+ aux_bus: bus {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
};
qdma: dma-controller@8380000 {
- compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+ compatible = "fsl,ls1043a-qdma", "fsl,ls1021a-qdma";
reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
<0x0 0x8390000 0x0 0x10000>, /* Status regs */
<0x0 0x83a0000 0x0 0x40000>; /* Block regs */
big-endian;
};
- rcpm: power-controller@1ee2140 {
+ rcpm: wakeup-controller@1ee2140 {
compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1ee2140 0x0 0x4>;
#fsl,rcpm-wakeup-cells = <1>;
/* these aliases provide the FMan ports mapping */
enet0: ethernet@e0000 {
pcsphy-handle = <&qsgmiib_pcs3>;
+ pcs-handle = <&qsgmiib_pcs3>;
pcs-handle-names = "qsgmii";
};
enet4: ethernet@e8000 {
pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+ pcs-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
pcs-handle-names = "sgmii", "qsgmii";
};
enet5: ethernet@ea000 {
pcsphy-handle = <&pcsphy5>, <&pcsphy5>;
+ pcs-handle = <&pcsphy5>, <&pcsphy5>;
pcs-handle-names = "sgmii", "qsgmii";
};
enet7: ethernet@f2000 {
pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>;
+ pcs-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>;
pcs-handle-names = "sgmii", "qsgmii", "xfi";
};
#address-cells = <1>;
#size-cells = <1>;
- mdio-mux-emi1 {
+ mdio-mux@54 {
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio-parent-bus = <&mdio0>;
#address-cells = <1>;
compatible = "fsl,qoriq-memory-controller";
reg = <0x0 0x1080000 0x0 0x1000>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- big-endian;
};
ifc: memory-controller@1530000 {
clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
- big-endian;
bus-width = <4>;
};
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
- big-endian;
};
edma0: dma-controller@2c00000 {
QORIQ_CLK_PLL_DIV(2)>;
};
- aux_bus: aux-bus {
+ aux_bus: bus {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
};
pcie_ep1: pcie_ep@3400000 {
- compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+ compatible = "fsl,ls1046a-pcie-ep";
reg = <0x00 0x03400000 0x0 0x00100000>,
<0x40 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
};
pcie_ep2: pcie_ep@3500000 {
- compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+ compatible = "fsl,ls1046a-pcie-ep";
reg = <0x00 0x03500000 0x0 0x00100000>,
<0x48 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
};
pcie_ep3: pcie_ep@3600000 {
- compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
+ compatible = "fsl,ls1046a-pcie-ep";
reg = <0x00 0x03600000 0x0 0x00100000>,
<0x50 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
big-endian;
};
- rcpm: power-controller@1ee2140 {
+ rcpm: wakeup-controller@1ee2140 {
compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1ee2140 0x0 0x4>;
#fsl,rcpm-wakeup-cells = <1>;
/* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
};
+
+ rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ /* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
+ interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
+ };
};
};
};
#gpio-cells = <2>;
gpio-controller;
- admin_led_lower {
+ admin-led-lower-hog {
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-low;
reg = <0x580000 0x40000>;
};
- partition@5C0000 {
+ partition@5c0000 {
label = "dpc";
- reg = <0x5C0000 0x40000>;
+ reg = <0x5c0000 0x40000>;
};
partition@600000 {
its: msi-controller@6020000 {
compatible = "arm,gic-v3-its";
msi-controller;
+ #msi-cells = <1>;
reg = <0x0 0x6020000 0 0x20000>;
};
};
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
};
pcie_ep1: pcie-ep@3400000 {
- compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+ compatible = "fsl,ls1088a-pcie-ep";
reg = <0x00 0x03400000 0x0 0x00100000>,
<0x20 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
};
pcie_ep2: pcie-ep@3500000 {
- compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+ compatible = "fsl,ls1088a-pcie-ep";
reg = <0x00 0x03500000 0x0 0x00100000>,
<0x28 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
};
pcie_ep3: pcie-ep@3600000 {
- compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+ compatible = "fsl,ls1088a-pcie-ep";
reg = <0x00 0x03600000 0x0 0x00100000>,
<0x30 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
<0x00000000 0x08340000 0 0x40000>; /* MC control reg */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */
dma-coherent;
#address-cells = <3>;
};
};
- rcpm: power-controller@1e34040 {
+ rcpm: wakeup-controller@1e34040 {
compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x18>;
#fsl,rcpm-wakeup-cells = <6>;
reg = <3 0 0x1000>;
ranges = <0 3 0 0x1000>;
- mdio-mux-emi1@54 {
+ mdio-mux@54 {
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio-parent-bus = <&emdio1>;
reg = <0x54 1>; /* BRDCFG4 */
its: msi-controller@6020000 {
compatible = "arm,gic-v3-its";
msi-controller;
+ #msi-cells = <1>;
reg = <0x0 0x6020000 0 0x20000>;
};
};
rstcr: syscon@1e60000 {
- compatible = "fsl,ls2080a-rstcr", "syscon";
+ compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd";
reg = <0x0 0x1e60000 0x0 0x4>;
- };
- reboot {
- compatible = "syscon-reboot";
- regmap = <&rstcr>;
- offset = <0x0>;
- mask = <0x2>;
+ reboot {
+ compatible = "syscon-reboot";
+ offset = <0x0>;
+ mask = <0x2>;
+ };
};
thermal-zones {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
<0x00000000 0x08340000 0 0x40000>; /* MC control reg */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */
dma-coherent;
#address-cells = <3>;
};
pcie1: pcie@3400000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+ compatible = "fsl,ls2080a-pcie";
reg-names = "regs", "config";
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "intr";
dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
};
pcie2: pcie@3500000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+ compatible = "fsl,ls2080a-pcie";
reg-names = "regs", "config";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "intr";
dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
};
pcie3: pcie@3600000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+ compatible = "fsl,ls2080a-pcie";
reg-names = "regs", "config";
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "intr";
dma-coherent;
num-viewport = <256>;
bus-range = <0x0 0xff>;
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
};
pcie4: pcie@3700000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+ compatible = "fsl,ls2080a-pcie";
reg-names = "regs", "config";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "intr";
dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
};
- rcpm: power-controller@1e34040 {
+ rcpm: wakeup-controller@1e34040 {
compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x18>;
#fsl,rcpm-wakeup-cells = <6>;
reg = <1>;
peer-hub = <&hub_3_0>;
reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
- vcc-supply = <®_vcc3v3>;
+ vdd-supply = <®_vcc3v3>;
};
hub_3_0: hub@2 {
reg = <2>;
peer-hub = <&hub_2_0>;
reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
- vcc-supply = <®_vcc3v3>;
+ vdd-supply = <®_vcc3v3>;
};
};
its: msi-controller@6020000 {
compatible = "arm,gic-v3-its";
msi-controller;
+ #msi-cells = <1>;
reg = <0x0 0x6020000 0 0x20000>;
};
};
timeout-sec = <30>;
};
- rcpm: power-controller@1e34040 {
+ rcpm: wakeup-controller@1e34040 {
compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x1c>;
#fsl,rcpm-wakeup-cells = <7>;
ppio-wins = <8>;
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
ppio-wins = <8>;
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
ppio-wins = <24>;
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
ppio-wins = <8>;
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
ppio-wins = <24>;
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
ppio-wins = <8>;
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>,
<0x00000000 0x08340000 0 0x40000>;
- msi-parent = <&its>;
+ msi-parent = <&its 0>;
/* iommu-map property is fixed up by u-boot */
iommu-map = <0 &smmu 0 0>;
dma-coherent;
assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
power-domains = <&pd IMX_SC_R_SPI_0>;
+ dmas = <&edma2 1 0 0>, <&edma2 0 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
power-domains = <&pd IMX_SC_R_SPI_1>;
+ dmas = <&edma2 3 0 0>, <&edma2 2 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
power-domains = <&pd IMX_SC_R_SPI_2>;
+ dmas = <&edma2 5 0 0>, <&edma2 4 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
power-domains = <&pd IMX_SC_R_SPI_3>;
+ dmas = <&edma2 7 0 0>, <&edma2 6 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
i2c0: i2c@5a800000 {
reg = <0x5a800000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
<&i2c0_lpcg IMX_LPCG_CLK_4>;
i2c1: i2c@5a810000 {
reg = <0x5a810000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
<&i2c1_lpcg IMX_LPCG_CLK_4>;
i2c2: i2c@5a820000 {
reg = <0x5a820000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
<&i2c2_lpcg IMX_LPCG_CLK_4>;
i2c3: i2c@5a830000 {
reg = <0x5a830000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
<&i2c3_lpcg IMX_LPCG_CLK_4>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_ADC_0>;
status = "disabled";
- };
+ };
adc1: adc@5a890000 {
compatible = "nxp,imx8qxp-adc";
assigned-clock-rates = <200000000>, <200000000>;
power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
<&pd IMX_SC_R_MJPEG_DEC_S0>;
- slot = <0>;
};
jpegenc: jpegenc@58450000 {
assigned-clock-rates = <200000000>, <200000000>;
power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
<&pd IMX_SC_R_MJPEG_ENC_S0>;
- slot = <0>;
};
img_jpeg_dec_lpcg: clock-controller@585d0000 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+lvds0_subsys: bus@56240000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x56240000 0x0 0x56240000 0x10000>;
+
+ qm_lvds0_lis_lpcg: qxp_mipi1_lis_lpcg: clock-controller@56243000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x56243000 0x4>;
+ #clock-cells = <1>;
+ clock-output-names = "lvds0_lis_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1>;
+ };
+
+ qm_lvds0_pwm_lpcg: qxp_mipi1_pwm_lpcg: clock-controller@5624300c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5624300c 0x4>;
+ #clock-cells = <1>;
+ clock-output-names = "lvds0_pwm_lpcg_clk",
+ "lvds0_pwm_lpcg_ipg_clk",
+ "lvds0_pwm_lpcg_32k_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+ };
+
+ qm_lvds0_i2c0_lpcg: qxp_mipi1_i2c0_lpcg: clock-controller@56243010 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x56243010 0x4>;
+ #clock-cells = <1>;
+ clock-output-names = "lvds0_i2c0_lpcg_clk",
+ "lvds0_i2c0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+ };
+
+ qm_pwm_lvds0: qxp_pwm_mipi_lvds1: pwm@56244000 {
+ compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+ reg = <0x56244000 0x1000>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ #pwm-cells = <3>;
+ power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+ status = "disabled";
+ };
+
+ qm_i2c0_lvds0: qxp_i2c0_mipi_lvds1: i2c@56246000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x56246000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <8>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_MIPI_1_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+ status = "disabled";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+lvds1_subsys: bus@57240000 {
+ compatible = "simple-bus";
+ interrupt-parent = <&irqsteer_lvds1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x57240000 0x0 0x57240000 0x10000>;
+
+ irqsteer_lvds1: interrupt-controller@57240000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x57240000 0x1000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <1>;
+ clocks = <&lvds1_lis_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_LVDS_1>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ };
+
+ lvds1_lis_lpcg: clock-controller@57243000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x57243000 0x4>;
+ #clock-cells = <1>;
+ clocks = <&lvds_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "lvds1_lis_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_LVDS_1>;
+ };
+
+ lvds1_pwm_lpcg: clock-controller@5724300c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5724300c 0x4>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_LVDS_1_PWM_0 IMX_SC_PM_CLK_PER>,
+ <&lvds_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "lvds1_pwm_lpcg_clk",
+ "lvds1_pwm_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>;
+ };
+
+ lvds1_i2c0_lpcg: clock-controller@57243010 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x57243010 0x4>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&lvds_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "lvds1_i2c0_lpcg_clk",
+ "lvds1_i2c0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+ };
+
+ lvds1_i2c1_lpcg: clock-controller@57243014 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x57243014 0x4>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&lvds_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "lvds1_i2c1_lpcg_clk",
+ "lvds1_i2c1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+ };
+
+ pwm_lvds1: pwm@57244000 {
+ compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+ reg = <0x57244000 0x1000>;
+ clocks = <&lvds1_pwm_lpcg IMX_LPCG_CLK_4>,
+ <&lvds1_pwm_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX_SC_R_LVDS_1_PWM_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ #pwm-cells = <3>;
+ power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>;
+ status = "disabled";
+ };
+
+ i2c0_lvds1: i2c@57246000 {
+ compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x57246000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <8>;
+ clocks = <&lvds1_i2c0_lpcg IMX_LPCG_CLK_0>,
+ <&lvds1_i2c0_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+ status = "disabled";
+ };
+
+ i2c1_lvds1: i2c@57247000 {
+ compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x57247000 0x1000>;
+ interrupts = <9>;
+ clocks = <&lvds1_i2c1_lpcg IMX_LPCG_CLK_0>,
+ <&lvds1_i2c1_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+ status = "disabled";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+mipi0_subsys: bus@56220000 {
+ compatible = "simple-bus";
+ interrupt-parent = <&irqsteer_mipi0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x56220000 0x0 0x56220000 0x10000>;
+
+ irqsteer_mipi0: interrupt-controller@56220000 {
+ compatible = "fsl,imx8qxp-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x56220000 0x1000>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <1>;
+ clocks = <&mipi0_lis_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_MIPI_0>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ };
+
+ mipi0_lis_lpcg: clock-controller@56223000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x56223000 0x4>;
+ #clock-cells = <1>;
+ power-domains = <&pd IMX_SC_R_MIPI_0>;
+ };
+
+ mipi0_pwm_lpcg: clock-controller@5622300c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5622300c 0x4>;
+ #clock-cells = <1>;
+ power-domains = <&pd IMX_SC_R_MIPI_0_PWM_0>;
+ };
+
+ mipi0_i2c0_lpcg_ipg_clk: clock-controller@56223014 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x56223014 0x4>;
+ #clock-cells = <1>;
+ clocks = <&mipi0_i2c0_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi0_i2c0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+ };
+
+ mipi0_i2c0_lpcg_ipg_s_clk: clock-controller@56223018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x56223018 0x4>;
+ #clock-cells = <1>;
+ clocks = <&dsi_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi0_i2c0_lpcg_ipg_s_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+ };
+
+ mipi0_i2c0_lpcg_clk: clock-controller@5622301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5622301c 0x4>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_MIPI_0_I2C_0 IMX_SC_PM_CLK_MISC2>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi0_i2c0_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+ };
+
+ mipi0_i2c1_lpcg_ipg_clk: clock-controller@56223024 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x56223024 0x4>;
+ #clock-cells = <1>;
+ clocks = <&mipi0_i2c1_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi0_i2c1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+ };
+
+ mipi0_i2c1_lpcg_ipg_s_clk: clock-controller@56223028 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x56223028 0x4>;
+ #clock-cells = <1>;
+ clocks = <&dsi_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi0_i2c1_lpcg_ipg_s_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+ };
+
+ mipi0_i2c1_lpcg_clk: clock-controller@5622302c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5622302c 0x4>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_MIPI_0_I2C_1 IMX_SC_PM_CLK_MISC2>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi0_i2c1_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+ };
+
+ pwm_mipi0: pwm@56224000 {
+ compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+ reg = <0x56224000 0x1000>;
+ clocks = <&mipi0_pwm_lpcg IMX_LPCG_CLK_4>,
+ <&mipi0_pwm_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX_SC_R_MIPI_0_PWM_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ #pwm-cells = <3>;
+ power-domains = <&pd IMX_SC_R_MIPI_0_PWM_0>;
+ status = "disabled";
+ };
+
+ i2c0_mipi0: i2c@56226000 {
+ compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x56226000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <8>;
+ clocks = <&mipi0_i2c0_lpcg_clk IMX_LPCG_CLK_0>,
+ <&mipi0_i2c0_lpcg_ipg_clk IMX_LPCG_CLK_0>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&mipi0_i2c0_lpcg_clk IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+ status = "disabled";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+mipi1_subsys: bus@57220000 {
+ compatible = "simple-bus";
+ interrupt-parent = <&irqsteer_mipi1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x57220000 0x0 0x57220000 0x10000>;
+
+ irqsteer_mipi1: interrupt-controller@57220000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x57220000 0x1000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <1>;
+ clocks = <&mipi1_lis_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_MIPI_1>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ };
+
+ mipi1_lis_lpcg: clock-controller@57223000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x57223000 0x4>;
+ #clock-cells = <1>;
+ clocks = <&dsi_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi1_lis_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1>;
+ };
+
+ mipi1_pwm_lpcg: clock-controller@5722300c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5722300c 0x4>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>,
+ <&dsi_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "mipi1_pwm_lpcg_clk",
+ "mipi1_pwm_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+ };
+
+ mipi1_i2c0_lpcg_clk: clock-controller@5722301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5722301c 0x4>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_MIPI_1_I2C_0 IMX_SC_PM_CLK_MISC2>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi1_i2c0_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+ };
+
+ mipi1_i2c0_lpcg_ipg_clk: clock-controller@57223014 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x57223014 0x4>;
+ #clock-cells = <1>;
+ clocks = <&mipi1_i2c0_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi1_i2c0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+ };
+
+ mipi1_i2c0_lpcg_ipg_s_clk: clock-controller@57223018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x57223018 0x4>;
+ #clock-cells = <1>;
+ clocks = <&dsi_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi1_i2c0_lpcg_ipg_s_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+ };
+
+ mipi1_i2c1_lpcg_ipg_clk: clock-controller@57223024 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x57223024 0x4>;
+ #clock-cells = <1>;
+ clocks = <&mipi1_i2c1_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi1_i2c1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+ };
+
+ mipi1_i2c1_lpcg_ipg_s_clk: clock-controller@57223028 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x57223028 0x4>;
+ #clock-cells = <1>;
+ clocks = <&dsi_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi1_i2c1_lpcg_ipg_s_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+ };
+
+ mipi1_i2c1_lpcg_clk: clock-controller@5722302c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5722302c 0x4>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_MIPI_1_I2C_1 IMX_SC_PM_CLK_MISC2>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi1_i2c1_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+ };
+
+ pwm_mipi1: pwm@57224000 {
+ compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+ reg = <0x57224000 0x1000>;
+ clocks = <&mipi1_pwm_lpcg IMX_LPCG_CLK_4>,
+ <&mipi1_pwm_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ #pwm-cells = <3>;
+ power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+ status = "disabled";
+ };
+
+ i2c0_mipi1: i2c@57226000 {
+ compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x57226000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <8>;
+ interrupt-parent = <&irqsteer_mipi1>;
+ clocks = <&mipi1_i2c0_lpcg_clk IMX_LPCG_CLK_0>,
+ <&mipi1_i2c0_lpcg_ipg_clk IMX_LPCG_CLK_0>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&mipi1_i2c0_lpcg_clk IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+ status = "disabled";
+ };
+};
mu_m0: mailbox@2d000000 {
compatible = "fsl,imx6sx-mu";
reg = <0x2d000000 0x20000>;
- interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
power-domains = <&pd IMX_SC_R_VPU_MU_0>;
status = "disabled";
mu1_m0: mailbox@2d020000 {
compatible = "fsl,imx6sx-mu";
reg = <0x2d020000 0x20000>;
- interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
power-domains = <&pd IMX_SC_R_VPU_MU_1>;
status = "disabled";
/ {
model = "Toradex Colibri iMX8DX Module";
};
+
+&thermal_zones {
+ pmic-thermal {
+ cooling-maps {
+ map0 {
+ cooling-device = <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpspi3>;
status = "okay";
-
- spidev0: spi@0 {
- reg = <0>;
- compatible = "rohm,dh2228fv";
- spi-max-frequency = <30000000>;
- };
};
&iomuxc {
enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
};
+ reg_1v5: regulator-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "1V5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
reg_audio: regulator-audio {
compatible = "regulator-fixed";
regulator-name = "3v3_aud";
assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
assigned-clock-rates = <24000000>;
AVDD-supply = <®_camera>; /* 2.8v */
+ DVDD-supply = <®_1v5>;
+ DOVDD-supply = <®_1v8>;
powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
compatible = "adi,adv7535";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hdmi_bridge>;
- reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
- reg-names = "main", "cec", "edid", "packet";
+ reg = <0x3d>, <0x3e>, <0x3c>, <0x3f>;
+ reg-names = "main", "edid", "cec", "packet";
adi,dsi-lanes = <4>;
avdd-supply = <®_hdmi>;
a2vdd-supply = <®_hdmi>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
- phy-handle = <&fec1_phy>;
+ phy-handle = <&fec1_phy_bcm>;
phy-supply = <&buck4_reg>;
fsl,magic-packet;
status = "okay";
#size-cells = <0>;
/* Atheros AR8031 PHY */
- fec1_phy: ethernet-phy@0 {
+ fec1_phy_ath: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
/*
reset-deassert-us = <10000>;
qca,keep-pll-enabled;
vddio-supply = <&vddio>;
+ status = "disabled";
vddio: vddio-regulator {
regulator-name = "VDDIO";
regulator-name = "VDDH";
};
};
+
+ /* Broadcom BCM54213PE PHY */
+ fec1_phy_bcm: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ /*
+ * Dedicated ENET_INT# and ENET_WOL# signals are
+ * unused, the PHY does not provide cable detect
+ * interrupt.
+ */
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ };
};
};
model = "Emtop Embedded Solutions i.MX8M Mini Baseboard V1";
compatible = "ees,imx8mm-emtop-baseboard", "ees,imx8mm-emtop-som",
"fsl,imx8mm";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ vddio-supply = <&vddio>;
+
+ vddio: vddio-regulator {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
+};
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
+ >;
+ };
};
};
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif1>;
- spdif-out;
- spdif-in;
+ audio-cpu = <&spdif1>;
+ audio-codec = <&spdif_out>, <&spdif_in>;
};
};
};
&rv3028 {
+ aux-voltage-chargeable = <1>;
trickle-resistor-ohms = <3000>;
};
/dts-v1/;
/plugin/;
-&{/} {
- compatible = "phytec,imx8mm-phygate-tauri-l";
-
-};
-
&gpio3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio3_hog>;
- uart4_rs485_en {
+ uart4-rs485-en-hog {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-low;
/dts-v1/;
/plugin/;
-&{/} {
- compatible = "phytec,imx8mm-phygate-tauri-l";
-
-};
-
&gpio3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio3_hog>;
- uart4_rs485_en {
+ uart4-rs485-en-hog {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-high;
/dts-v1/;
/plugin/;
-
-&{/} {
- compatible = "phytec,imx8mm-phygate-tauri-l";
-
-};
-
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
/* RTC */
&rv3028 {
+ aux-voltage-chargeable = <1>;
trickle-resistor-ohms = <3000>;
};
};
&i2c1 {
- clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
/ {
model = "Variscite VAR-SOM-MX8MM module";
- compatible = "variscite,var-som-mx8mm", "fsl,imx8mm";
chosen {
stdout-path = &uart4;
&{/} {
compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
+ reg_vana: regulator-2p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ reg_vddl: regulator-1p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
reg_cam: regulator-cam {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_cam>;
reg = <0x10>;
clocks = <&cam24m>;
VDIG-supply = <®_cam>;
+ VANA-supply = <®_vana>;
+ VDDL-supply = <®_vddl>;
port {
/* MIPI CSI-2 bus endpoint */
/dts-v1/;
/plugin/;
-&{/} {
- compatible = "gw,imx8mm-gw72xx-0x";
-};
-
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-low;
/dts-v1/;
/plugin/;
-&{/} {
- compatible = "gw,imx8mm-gw72xx-0x";
-};
-
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "rs485_en";
};
- rs485_hd {
+ rs485-hd-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-low;
/dts-v1/;
/plugin/;
-&{/} {
- compatible = "gw,imx8mm-gw72xx-0x";
-};
-
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "rs485_en";
};
- rs485_hd {
+ rs485-hd-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-high;
&{/} {
compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+ reg_vana: regulator-2p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ reg_vddl: regulator-1p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
reg_cam: regulator-cam {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_cam>;
reg = <0x10>;
clocks = <&cam24m>;
VDIG-supply = <®_cam>;
+ VANA-supply = <®_vana>;
+ VDDL-supply = <®_vddl>;
port {
/* MIPI CSI-2 bus endpoint */
};
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-low;
};
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "rs485_en";
};
- rs485_hd {
+ rs485-hd-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-low;
};
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "rs485_en";
};
- rs485_hd {
+ rs485-hd-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-high;
#include "imx8mm.dtsi"
#include "imx8mm-venice-gw700x.dtsi"
-#include "imx8mm-venice-gw7905.dtsi"
+#include "imx8mm-venice-gw75xx.dtsi"
/ {
- model = "Gateworks Venice GW7905-0x i.MX8MM Development Kit";
- compatible = "gateworks,imx8mm-gw7905-0x", "fsl,imx8mm";
+ model = "Gateworks Venice GW75xx-0x i.MX8MM Development Kit";
+ compatible = "gateworks,imx8mm-gw75xx-0x", "fsl,imx8mm";
chosen {
stdout-path = &uart2;
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
};
};
+ reg_1v5: regulator-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "1V5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
reg_audio: regulator-audio {
compatible = "regulator-fixed";
regulator-name = "3v3_aud";
assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
assigned-clock-rates = <24000000>;
AVDD-supply = <®_camera>; /* 2.8v */
+ DVDD-supply = <®_1v5>;
+ DOVDD-supply = <®_1v8>;
powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
compatible = "adi,adv7535";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hdmi_bridge>;
- reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
- reg-names = "main", "cec", "edid", "packet";
+ reg = <0x3d>, <0x3e>, <0x3c>, <0x3f>;
+ reg-names = "main", "edid", "cec", "packet";
adi,dsi-lanes = <4>;
avdd-supply = <®_hdmi>;
a2vdd-supply = <®_hdmi>;
"Line Out Jack", "LINEVOUTR";
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif1>;
- spdif-out;
- spdif-in;
+ audio-cpu = <&spdif1>;
+ audio-codec = <&spdif_out>, <&spdif_in>;
};
sound-micfil {
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
};
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector: endpoint {
+ remote-endpoint = <&hdmi_to_connector>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
};
};
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ hdmi_to_connector:endpoint {
+ remote-endpoint = <&hdmi_connector>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
&i2c2 {
clock-frequency = <384000>;
pinctrl-names = "default";
};
};
+&hdmi_pvi {
+ status = "okay";
+};
+
&i2c3 {
/* Connected to USB Hub */
usb-typec@52 {
status = "okay";
};
+&lcdif3 {
+ status = "okay";
+};
+
&micfil {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pdm>;
>;
};
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000010
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
pwms = <&pwm4 0 83 0>;
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "J17";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
panel: panel {
/* Compatible string is filled in by panel board DT Overlay. */
backlight = <&backlight>;
"", "SPI3_CS#", "", "", "", "", "", "";
};
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ ddc-i2c-bus = <&i2c5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&lcdif3 {
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
};
&sai3 {
- #clock-cells = <0>;
#sound-dai-cells = <0>;
assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
>;
};
+ pinctrl_hdmi: hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
+ >;
+ };
+
pinctrl_hog_feature: hog-feature-grp {
fsl,pins = <
/* GPIO5_IO03 */
<0x1 0x00000000 0 0xc0000000>;
};
+ native-hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "HDMI OUT";
+ type = "a";
+
+ port {
+ hdmi_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
pcie0_refclk: pcie0-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
status = "disabled";/* can2 pin conflict with pdm */
};
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
status = "okay";
};
+&lcdif3 {
+ status = "okay";
+};
+
&micfil {
#sound-dai-cells = <0>;
pinctrl-names = "default";
>;
};
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c2
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c2
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x10
+ >;
+ };
+
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010
/dts-v1/;
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include <dt-bindings/leds/leds-pca9532.h>
#include <dt-bindings/pwm/pwm.h>
#include "imx8mp-phycore-som.dtsi"
};
};
+ reg_vcc_5v_sw: regulator-vcc-5v-sw {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "VCC_5V_SW";
+ };
+
reg_can1_stby: regulator-can1-stby {
compatible = "regulator-fixed";
pinctrl-names = "default";
};
};
+/* TPM */
+&ecspi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ tpm: tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ reg = <0>;
+ spi-max-frequency = <38000000>;
+ };
+};
+
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
+ vcc-supply = <®_vcc_3v3_sw>;
};
leds@62 {
};
};
+&media_blk_ctrl {
+ /*
+ * The LVDS panel on this device uses 72.4 MHz pixel clock,
+ * set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB
+ * serializer and LCDIFv3 scanout engine can reach accurate
+ * pixel clock of exactly 72.4 MHz.
+ */
+ assigned-clock-rates = <500000000>, <200000000>,
+ <0>, <0>, <500000000>,
+ <506800000>;
+};
+
&snvs_pwrkey {
status = "okay";
};
+&pcie_phy {
+ clocks = <&hsio_blk_ctrl>;
+ clock-names = "ref";
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+ fsl,clkreq-unsupported;
+ status = "okay";
+};
+
+/* Mini PCIe */
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ vpcie-supply = <®_vcc_3v3_sw>;
+ status = "okay";
+};
+
&pwm3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
interrupt-parent = <&gpio4>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ aux-voltage-chargeable = <1>;
wakeup-source;
trickle-resistor-ohms = <3000>;
};
/* USB2 4-port USB3.0 HUB */
&usb3_phy1 {
+ vbus-supply = <®_vcc_5v_sw>;
status = "okay";
};
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ disable-wp;
vmmc-supply = <®_usdhc2_vmmc>;
+ vqmmc-supply = <&ldo5>;
bus-width = <4>;
status = "okay";
};
};
&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x80
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x80
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x80
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x00
+ >;
+ };
+
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
>;
};
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x60
+ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x60 /* open drain, pull up */
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x40
+ >;
+ };
+
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x12
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
+ * Author: Cem Tenruh <c.tenruh@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+ðphy1 {
+ status = "disabled";
+};
+
+&fec {
+ status = "disabled";
+};
device_type = "memory";
reg = <0x0 0x40000000 0 0x80000000>;
};
+
+ reg_vdd_io: regulator-vdd-io {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VDD_IO";
+ };
};
&A53_0 {
compatible = "atmel,24c32";
reg = <0x51>;
pagesize = <32>;
+ vcc-supply = <®_vdd_io>;
};
rv3028: rtc@52 {
assigned-clock-rates = <500000000>, <200000000>, <0>,
/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
<68900000>,
+ <500000000>,
/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
<964600000>;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Variscite Ltd.
+ */
+
+#include "imx8mp-var-som.dtsi"
+
+/ {
+ model = "Variscite VAR-SOM-MX8M-PLUS on Symphony-Board";
+ compatible = "variscite,var-som-mx8mp-symphony", "variscite,var-som-mx8mp", "fsl,imx8mp";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Variscite Ltd.
+ *
+ * Author: Tarang Raval <tarang.raval@siliconsignals.io>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx8mp.dtsi"
+
+/ {
+ model = "Variscite VAR-SOM-MX8M Plus module";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_POWER;
+ gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0xc0000000>,
+ <0x1 0x00000000 0 0xc0000000>;
+ };
+
+
+ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ off-on-delay-us = <12000>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ buck4: BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2: LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3: LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ /* GPIO expander */
+ pca9534: gpio@20 {
+ compatible = "nxp,pca9534";
+ reg = <0x20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9534>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+
+ usb3-sata-sel-hog {
+ gpio-hog;
+ gpios = <4 0>;
+ output-low;
+ line-name = "usb3_sata_sel";
+ };
+ };
+};
+
+/* Console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* SD-card */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL 0x400001c2
+ MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_pca9534: pca9534grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0xc0
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x1c0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x40
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x1c4
+ MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x10
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0xc0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
/plugin/;
&{/} {
- compatible = "gw,imx8mp-gw74xx", "fsl,imx8mp";
+ reg_vana: regulator-2p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ reg_vddl: regulator-1p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
reg_cam: regulator-cam {
pinctrl-names = "default";
reg = <0x10>;
clocks = <&cam24m>;
VDIG-supply = <®_cam>;
+ VANA-supply = <®_vana>;
+ VDDL-supply = <®_vddl>;
port {
/* MIPI CSI-2 bus endpoint */
#include "imx8mp.dtsi"
#include "imx8mp-venice-gw702x.dtsi"
-#include "imx8mp-venice-gw7905.dtsi"
+#include "imx8mp-venice-gw75xx.dtsi"
/ {
- model = "Gateworks Venice GW7905-2x i.MX8MP Development Kit";
- compatible = "gateworks,imx8mp-gw7905-2x", "fsl,imx8mp";
+ model = "Gateworks Venice GW75xx-2x i.MX8MP Development Kit";
+ compatible = "gateworks,imx8mp-gw75xx-2x", "fsl,imx8mp";
chosen {
stdout-path = &uart2;
};
};
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+ status = "okay";
+};
+
&backlight {
power-supply = <®_3p3v>;
};
status = "okay";
};
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+ status = "okay";
+};
+
/* Verdin UART_1 */
&uart1 {
status = "okay";
};
};
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+ status = "okay";
+};
+
&backlight {
power-supply = <®_3p3v>;
};
status = "okay";
};
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+ status = "okay";
+};
+
/* Verdin UART_1, connector X50 through RS485 transceiver */
&uart1 {
linux,rs485-enabled-at-boot-time;
};
};
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+ status = "okay";
+};
+
&backlight {
power-supply = <®_3p3v>;
};
vin-supply = <®_3p3v>;
};
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+ status = "okay";
+};
+
/* Verdin UART_1 */
&uart1 {
status = "okay";
&usdhc1 {
bus-width = <4>;
keep-power-in-suspend;
- max-frequency = <100000000>;
non-removable;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wifi_ctrl>;
};
};
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+ status = "okay";
+};
+
&backlight {
power-supply = <®_3p3v>;
};
vin-supply = <®_3p3v>;
};
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+ status = "okay";
+};
+
/* Verdin UART_1 */
&uart1 {
status = "okay";
};
};
+ sound_hdmi: sound-hdmi {
+ compatible = "fsl,imx-audio-hdmi";
+ model = "audio-hdmi";
+ audio-cpu = <&aud2htx>;
+ hdmi-out;
+ status = "disabled";
+ };
+
/* Carrier Board Supplies */
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_DUMMY>,
+ clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
<&clk IMX8MP_CLK_NAND_USDHC_BUS>,
<&clk IMX8MP_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_DUMMY>,
+ clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
<&clk IMX8MP_CLK_NAND_USDHC_BUS>,
<&clk IMX8MP_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_DUMMY>,
+ clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
<&clk IMX8MP_CLK_NAND_USDHC_BUS>,
<&clk IMX8MP_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
};
};
+ isp_0: isp@32e10000 {
+ compatible = "fsl,imx8mp-isp";
+ reg = <0x32e10000 0x10000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+ clock-names = "isp", "aclk", "hclk";
+ power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
+ fsl,blk-ctrl = <&media_blk_ctrl 0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ isp_1: isp@32e20000 {
+ compatible = "fsl,imx8mp-isp";
+ reg = <0x32e20000 0x10000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+ clock-names = "isp", "aclk", "hclk";
+ power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
+ fsl,blk-ctrl = <&media_blk_ctrl 1>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
dewarp: dwe@32e30000 {
compatible = "nxp,imx8mp-dw100";
reg = <0x32e30000 0x10000>;
compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
reg = <0x32e40000 0x10000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <266000000>;
+ clock-frequency = <250000000>;
clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
<&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
<&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
clock-names = "pclk", "wrap", "phy", "axi";
assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>,
<&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
<&clk IMX8MP_CLK_24M>;
- assigned-clock-rates = <266000000>;
power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
status = "disabled";
compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
reg = <0x32e50000 0x10000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <266000000>;
+ clock-frequency = <250000000>;
clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
<&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
<&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
clock-names = "pclk", "wrap", "phy", "axi";
assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>,
<&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
<&clk IMX8MP_CLK_24M>;
- assigned-clock-rates = <266000000>;
power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
status = "disabled";
clock-names = "apb", "axi", "cam1", "cam2",
"disp1", "disp2", "isp", "phy";
+ /*
+ * The ISP maximum frequency is 400MHz in normal mode
+ * and 500MHz in overdrive mode. The 400MHz operating
+ * point hasn't been successfully tested yet, so set
+ * IMX8MP_CLK_MEDIA_ISP to 500MHz for the time being.
+ */
assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
<&clk IMX8MP_CLK_MEDIA_APB>,
<&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
<&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+ <&clk IMX8MP_CLK_MEDIA_ISP>,
<&clk IMX8MP_VIDEO_PLL1>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
<&clk IMX8MP_SYS_PLL1_800M>,
<&clk IMX8MP_VIDEO_PLL1_OUT>,
- <&clk IMX8MP_VIDEO_PLL1_OUT>;
+ <&clk IMX8MP_VIDEO_PLL1_OUT>,
+ <&clk IMX8MP_SYS_PLL2_500M>;
assigned-clock-rates = <500000000>, <200000000>,
- <0>, <0>, <1039500000>;
+ <0>, <0>, <500000000>,
+ <1039500000>;
#power-domain-cells = <1>;
lvds_bridge: bridge@5c {
};
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif1>;
- spdif-out;
- spdif-in;
+ audio-cpu = <&spdif1>;
+ audio-codec = <&spdif_out>, <&spdif_in>;
+ };
+
+ hdmi_arc_in: hdmi-arc-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
};
sound-hdmi-arc {
compatible = "fsl,imx-audio-spdif";
model = "imx-hdmi-arc";
- spdif-controller = <&spdif2>;
- spdif-in;
+ audio-cpu = <&spdif2>;
+ audio-codec = <&hdmi_arc_in>;
};
};
/dts-v1/;
+#include <dt-bindings/usb/pd.h>
#include "imx8qm.dtsi"
/ {
reg = <0x00000000 0x80000000 0 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ vdev0vring0: memory@90000000 {
+ reg = <0 0x90000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: memory@90008000 {
+ reg = <0 0x90008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: memory@90010000 {
+ reg = <0 0x90010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: memory@90018000 {
+ reg = <0 0x90018000 0 0x8000>;
+ no-map;
+ };
+
+ rsc_table0: memory@900ff000 {
+ reg = <0 0x900ff000 0 0x1000>;
+ no-map;
+ };
+
+ vdev2vring0: memory@90100000 {
+ reg = <0 0x90100000 0 0x8000>;
+ no-map;
+ };
+
+ vdev2vring1: memory@90108000 {
+ reg = <0 0x90108000 0 0x8000>;
+ no-map;
+ };
+
+ vdev3vring0: memory@90110000 {
+ reg = <0 0x90110000 0 0x8000>;
+ no-map;
+ };
+
+ vdev3vring1: memory@90118000 {
+ reg = <0 0x90118000 0 0x8000>;
+ no-map;
+ };
+
+ rsc_table1: memory@901ff000 {
+ reg = <0 0x901ff000 0 0x1000>;
+ no-map;
+ };
+
+ vdevbuffer: memory@90400000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x90400000 0 0x100000>;
+ no-map;
+ };
+ };
+
+ lvds_backlight0: backlight-lvds0 {
+ compatible = "pwm-backlight";
+ pwms = <&qm_pwm_lvds0 0 100000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <80>;
+ };
+
+ lvds_backlight1: backlight-lvds1 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm_lvds1 0 100000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <80>;
+ };
+
+ mux-controller {
+ compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec_mux>;
+ select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+ orientation-switch;
+
+ port {
+ usb3_data_ss: endpoint {
+ remote-endpoint = <&typec_con_ss>;
+ };
+ };
+ };
+
reg_usdhc2_vmmc: usdhc2-vmmc {
compatible = "regulator-fixed";
regulator-name = "SD1_SPWR";
"LINPUT1", "Mic Jack",
"Mic Jack", "MICB";
};
+
+ imx8qm-cm4-0 {
+ compatible = "fsl,imx8qm-cm4";
+ clocks = <&clk_dummy>;
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&lsio_mu5 0 1
+ &lsio_mu5 1 1
+ &lsio_mu5 3 1>;
+ memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&vdev1vring0>, <&vdev1vring1>, <&rsc_table0>;
+ power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>;
+
+ fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
+ fsl,entry-address = <0x34fe0000>;
+ };
+
+ imx8qm-cm4-1 {
+ compatible = "fsl,imx8qm-cm4";
+ clocks = <&clk_dummy>;
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&lsio_mu6 0 1
+ &lsio_mu6 1 1
+ &lsio_mu6 3 1>;
+ memory-region = <&vdevbuffer>, <&vdev2vring0>, <&vdev2vring1>,
+ <&vdev3vring0>, <&vdev3vring1>, <&rsc_table1>;
+ power-domains = <&pd IMX_SC_R_M4_1_PID0>, <&pd IMX_SC_R_M4_1_MU_1A>;
+
+ fsl,resource-id = <IMX_SC_R_M4_1_PID0>;
+ fsl,entry-address = <0x38fe0000>;
+ };
+
};
&adc0 {
compatible = "st,l3g4200d-gyro";
reg = <0x69>;
};
+
+ ptn5110: tcpc@51 {
+ compatible = "nxp,ptn5110", "tcpci";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec>;
+ reg = <0x51>;
+ interrupt-parent = <&lsio_gpio4>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
+
+ usb_con1: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "source";
+ data-role = "dual";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec_dr_sw: endpoint {
+ remote-endpoint = <&usb3_drd_sw>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ typec_con_ss: endpoint {
+ remote-endpoint = <&usb3_data_ss>;
+ };
+ };
+ };
+ };
+ };
};
&i2c1 {
};
};
+&i2c1_lvds0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds0_lpi2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c1_lvds1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds1_lpi2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c0_mipi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mipi0_lpi2c0>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c0_mipi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mipi1_lpi2c0>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
pinctrl-0 = <&pinctrl_lpspi2 &pinctrl_lpspi2_cs>;
cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
status = "okay";
-
- spidev0: spi@0 {
- reg = <0>;
- compatible = "rohm,dh2228fv";
- spi-max-frequency = <30000000>;
- };
};
&lsio_mu5 {
status = "okay";
};
+&qm_pwm_lvds0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_lvds0>;
+ status = "okay";
+};
+
+&pwm_lvds1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_lvds1>;
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
status = "okay";
};
+&usb3_phy {
+ status = "okay";
+};
+
+&usbotg3 {
+ status = "okay";
+};
+
+&usbotg3_cdns3 {
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ usb3_drd_sw: endpoint {
+ remote-endpoint = <&typec_dr_sw>;
+ };
+ };
+};
+
&sai0 {
#sound-dai-cells = <0>;
assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
>;
};
+ pinctrl_mipi0_lpi2c0: mipi0_lpi2c0grp {
+ fsl,pins = <
+ IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020
+ IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020
+ IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19 0x00000020
+ >;
+ };
+
+ pinctrl_mipi1_lpi2c0: mipi1_lpi2c0grp {
+ fsl,pins = <
+ IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020
+ IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020
+ IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23 0x00000020
+ >;
+ };
+
pinctrl_flexspi0: flexspi0grp {
fsl,pins = <
IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021
>;
};
+ pinctrl_lvds0_lpi2c1: lvds0lpi2c1grp {
+ fsl,pins = <
+ IMX8QM_LVDS0_I2C1_SCL_LVDS0_I2C1_SCL 0xc600004c
+ IMX8QM_LVDS0_I2C1_SDA_LVDS0_I2C1_SDA 0xc600004c
+ >;
+ };
+
+ pinctrl_lvds1_lpi2c1: lvds1lpi2c1grp {
+ fsl,pins = <
+ IMX8QM_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL 0xc600004c
+ IMX8QM_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA 0xc600004c
+ >;
+ };
+
+ pinctrl_pwm_lvds0: pwmlvds0grp {
+ fsl,pins = <
+ IMX8QM_LVDS0_GPIO00_LVDS0_PWM0_OUT 0x00000020
+ >;
+ };
+
+ pinctrl_pwm_lvds1: pwmlvds1grp {
+ fsl,pins = <
+ IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT 0x00000020
+ >;
+ };
+
pinctrl_sai0: sai0grp {
fsl,pins = <
IMX8QM_SPI0_CS1_AUD_SAI0_TXC 0x0600004c
>;
};
+ pinctrl_typec: typecgrp {
+ fsl,pins = <
+ IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26 0x00000021
+ >;
+ };
+
+ pinctrl_typec_mux: typecmuxgrp {
+ fsl,pins = <
+ IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19 0x60
+ IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06 0x60
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2024 NXP
+ */
+
+&qm_lvds0_lis_lpcg {
+ clocks = <&lvds_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+};
+
+&qm_lvds0_pwm_lpcg {
+ clocks = <&clk IMX_SC_R_LVDS_0_PWM_0 IMX_SC_PM_CLK_PER>,
+ <&lvds_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+};
+
+&qm_lvds0_i2c0_lpcg {
+ clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&lvds_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+};
+
+&qm_pwm_lvds0 {
+ clocks = <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_4>,
+ <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_0>;
+};
+
+&qm_i2c0_lvds0 {
+ clocks = <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_0>,
+ <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_4>;
+};
+
+&lvds0_subsys {
+ interrupt-parent = <&irqsteer_lvds0>;
+
+ irqsteer_lvds0: interrupt-controller@56240000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x56240000 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <1>;
+ clocks = <&qm_lvds0_lis_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ };
+
+ lvds0_i2c1_lpcg: clock-controller@56243014 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x56243014 0x4>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&lvds_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "lvds0_i2c1_lpcg_clk",
+ "lvds0_i2c1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
+ };
+
+ i2c1_lvds0: i2c@56247000 {
+ compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x56247000 0x1000>;
+ interrupts = <9>;
+ clocks = <&lvds0_i2c1_lpcg IMX_LPCG_CLK_0>,
+ <&lvds0_i2c1_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
+ status = "disabled";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2024 NXP
+ */
+
+&mipi0_lis_lpcg {
+ clocks = <&dsi_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "mipi0_lis_lpcg_ipg_clk";
+};
+
+&mipi0_pwm_lpcg {
+ clocks = <&clk IMX_SC_R_MIPI_0_PWM_0 IMX_SC_PM_CLK_PER>,
+ <&dsi_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "mipi0_pwm_lpcg_clk",
+ "mipi0_pwm_lpcg_ipg_clk";
+};
\ No newline at end of file
clock-output-names = "spdif1_rx";
};
+ lvds_ipg_clk: clock-controller-lvds-ipg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "lvds0_ipg_clk";
+ };
+
+ dsi_ipg_clk: clock-controller-dsi-ipg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <120000000>;
+ clock-output-names = "dsi_ipg_clk";
+ };
+
+ mipi_pll_div2_clk: clock-controller-mipi-div2-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <432000000>;
+ clock-output-names = "mipi_pll_div2_clk";
+ };
+
/* sorted in register address */
#include "imx8-ss-cm41.dtsi"
#include "imx8-ss-audio.dtsi"
#include "imx8-ss-vpu.dtsi"
#include "imx8-ss-gpu0.dtsi"
+ #include "imx8-ss-mipi0.dtsi"
+ #include "imx8-ss-lvds0.dtsi"
+ #include "imx8-ss-mipi1.dtsi"
+ #include "imx8-ss-lvds1.dtsi"
#include "imx8-ss-img.dtsi"
#include "imx8-ss-dma.dtsi"
#include "imx8-ss-conn.dtsi"
#include "imx8qm-ss-conn.dtsi"
#include "imx8qm-ss-lsio.dtsi"
#include "imx8qm-ss-audio.dtsi"
+#include "imx8qm-ss-lvds.dtsi"
+#include "imx8qm-ss-mipi.dtsi"
* Author: Alexander Stein
*/
+&mu_m0 {
+ interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mu1_m0 {
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&vpu_core0 {
reg = <0x2d040000 0x10000>;
};
};
flexspi2: spi@29810000 {
- compatible = "nxp,imx8mm-fspi";
+ compatible = "nxp,imx8ulp-fspi";
reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
#address-cells = <1>;
* Copyright 2018-2021 Toradex
*/
+/* Colibri Analogue Inputs */
+&adc0 {
+ status = "okay";
+};
+
+/* Colibri PWM_A */
+&adma_pwm {
+ status = "okay";
+};
+
&colibri_gpio_keys {
status = "okay";
};
+&extcon_usbc_det {
+ status = "okay";
+};
+
/* Colibri Ethernet */
&fec1 {
status = "okay";
status = "okay";
};
+/* USB PHY for usbotg3 */
+&usb3_phy {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usbotg3 {
+ status = "okay";
+};
+
+&usbotg3_cdns3 {
+ status = "okay";
+};
+
+/* USB PHY for usbotg1 */
+&usbphy1 {
+ status = "okay";
+};
+
/* Colibri SDCard */
&usdhc2 {
status = "okay";
};
};
+/* Colibri Analogue Inputs */
+&adc0 {
+ status = "okay";
+};
+
+/* Colibri PWM_A */
+&adma_pwm {
+ status = "okay";
+};
+
&colibri_gpio_keys {
status = "okay";
};
+&extcon_usbc_det {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
status = "okay";
};
+/* USB PHY for usbotg3 */
+&usb3_phy {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usbotg3 {
+ status = "okay";
+};
+
+&usbotg3_cdns3 {
+ status = "okay";
+};
+
+/* USB PHY for usbotg1 */
+&usbphy1 {
+ status = "okay";
+};
+
/* Colibri SD/MMC Card */
&usdhc2 {
status = "okay";
};
};
+/* Colibri Analogue Inputs */
+&adc0 {
+ status = "okay";
+};
+
+/* Colibri PWM_A */
+&adma_pwm {
+ status = "okay";
+};
+
&colibri_gpio_keys {
status = "okay";
};
+&extcon_usbc_det {
+ status = "okay";
+};
+
/* Colibri FastEthernet */
&fec1 {
status = "okay";
status = "okay";
};
+/* USB PHY for usbotg3 */
+&usb3_phy {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usbotg3 {
+ status = "okay";
+};
+
+&usbotg3_cdns3 {
+ status = "okay";
+};
+
+/* USB PHY for usbotg1 */
+&usbphy1 {
+ status = "okay";
+};
+
/* Colibri SD/MMC Card */
&usdhc2 {
status = "okay";
};
};
+ extcon_usbc_det: usbc-det {
+ compatible = "linux,extcon-usb-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbc_det>;
+ id-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ reg_module_3v3_avdd: regulator-module-3v3-avdd {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3_AVDD_AUDIO";
+ };
+
+ reg_module_vref_1v8: regulator-module-vref-1v8 {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vref-1v8";
+ };
+
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_reg>;
+ gpio = <&lsio_gpio4 3 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usbh_vbus";
+ };
+
+ sound-card {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,name = "colibri-imx8x";
+
+ dailink_master: simple-audio-card,codec {
+ clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ sound-dai = <&sgtl5000_a>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai0>;
+ };
+ };
};
-/* TODO Analogue Inputs */
+/* Colibri Analogue Inputs */
+&adc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0>;
+ vref-supply = <®_module_vref_1v8>;
+};
-/* TODO Cooling maps for DX */
+/* Colibri PWM_A */
+&adma_pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_a>;
+};
&cpu_alert0 {
hysteresis = <2000>;
type = "critical";
};
-/* TODO flexcan1 - 3 */
-
-/* TODO GPU */
+&enet0_lpcg {
+ clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+ <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+ <&conn_axi_clk>,
+ <&clk IMX_SC_R_ENET_0 IMX_SC_C_DISABLE_50>,
+ <&conn_ipg_clk>,
+ <&conn_ipg_clk>;
+ clock-output-names = "enet0_lpcg_timer_clk",
+ "enet0_lpcg_txc_sampling_clk",
+ "enet0_lpcg_ahb_clk",
+ "enet0_lpcg_ref_50mhz_clk",
+ "enet0_lpcg_ipg_clk",
+ "enet0_lpcg_ipg_s_clk";
+};
/* On-module I2C */
&i2c0 {
pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>;
status = "okay";
+ /* USB HUB USB3803 */
+ usb-hub@8 {
+ compatible = "smsc,usb3803";
+ reg = <0x8>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>, <49152000>, <12000000>, <12000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3503a>;
+ bypass-gpios = <&gpio_expander_43 5 GPIO_ACTIVE_LOW>;
+ clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "refclk";
+ disabled-ports = <2>;
+ initial-mode = <1>;
+ intn-gpios = <&lsio_gpio3 4 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio_expander_43 4 GPIO_ACTIVE_LOW>;
+ };
+
+ sgtl5000_a: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ #sound-dai-cells = <0>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>, <49152000>, <12000000>, <12000000>;
+ clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ VDDA-supply = <®_module_3v3_avdd>;
+ VDDD-supply = <®_module_vref_1v8>;
+ VDDIO-supply = <®_module_3v3>;
+ };
+
/* Touch controller */
touchscreen@2c {
compatible = "adi,ad7879-1";
adi,conversion-interval = /bits/ 8 <255>;
status = "disabled";
};
+
+ gpio_expander_43: gpio@43 {
+ compatible = "fcs,fxl6408";
+ reg = <0x43>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "Wi-Fi_W_DISABLE",
+ "Wi-Fi_WKUP_WLAN",
+ "PWR_EN_+V3.3_WiFi_N",
+ "PCIe_REF_CLK_EN",
+ "USB_RESET_N",
+ "USB_BYPASS_N",
+ "Wi-Fi_PDn",
+ "Wi-Fi_WKUP_BT";
+ };
};
/* TODO i2c lvds0 accessible on FFC (X2) */
pinctrl-names = "default";
};
+/* VPU Mailboxes */
+&mu_m0 {
+ status="okay";
+};
+
+&mu1_m0 {
+ status="okay";
+};
+
/* TODO MIPI CSI */
/* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */
/* TODO on-module PCIe for Wi-Fi */
-/* TODO On-module i2s / Audio */
+/* On-module I2S */
+&sai0 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai0>;
+ status = "okay";
+};
+
+&thermal_zones {
+ pmic-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+ trips {
+ pmic_alert0: trip0 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ pmic_crit0: trip1 {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ pmic_cooling_map0: map0 {
+ trip = <&pmic_alert0>;
+ cooling-device = <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
+
+&usbotg1 {
+ adp-disable;
+ disable-over-current;
+ extcon = <&extcon_usbc_det &extcon_usbc_det>;
+ hnp-disable;
+ power-active-high;
+ srp-disable;
+ vbus-supply = <®_usbh_vbus>;
+};
+
+&usbotg3_cdns3 {
+ dr_mode = "host";
+};
/* On-module eMMC */
&usdhc1 {
no-1-8-v;
};
-/* TODO USB Client/Host */
+&vpu {
+ compatible = "nxp,imx8qxp-vpu";
+ status = "okay";
+};
-/* TODO USB Host */
+/* VPU Decoder */
+&vpu_core0 {
+ reg = <0x2d040000 0x10000>;
+ memory-region = <&decoder_boot>, <&decoder_rpc>;
+ status = "okay";
+};
-/* TODO VPU Encoder/Decoder */
+/* VPU Encoder */
+&vpu_core1 {
+ reg = <0x2d050000 0x10000>;
+ memory-region = <&encoder_boot>, <&encoder_rpc>;
+ status = "okay";
+};
&iomuxc {
/* On-module touch pen-down interrupt */
};
+ reg_vdd_12v: regulator-vdd-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_vref_1v8: regulator-adc-vref {
compatible = "regulator-fixed";
regulator-name = "vref_1v8";
off-on-delay-us = <12000>;
enable-active-high;
};
+
+ backlight_lvds: backlight-lvds {
+ compatible = "pwm-backlight";
+ pwms = <&adp5585 0 100000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <100>;
+ power-supply = <®_vdd_12v>;
+ enable-gpios = <&adp5585 9 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ bt_sco_codec: bt-sco-codec {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <1>;
+ };
+
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&bt_sco_codec 1>;
+ };
+ };
+
+ sound-micfil {
+ compatible = "fsl,imx-audio-card";
+ model = "micfil-audio";
+
+ pri-dai-link {
+ link-name = "micfil hifi";
+ format = "i2s";
+
+ cpu {
+ sound-dai = <&micfil>;
+ };
+ };
+ };
+
+ sound-xcvr {
+ compatible = "fsl,imx-audio-card";
+ model = "imx-audio-xcvr";
+
+ pri-dai-link {
+ link-name = "XCVR PCM";
+
+ cpu {
+ sound-dai = <&xcvr>;
+ };
+ };
+ };
};
&adc1 {
};
};
+&lpi2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ status = "okay";
+
+ inertial-meter@6a {
+ compatible = "st,lsm6dso";
+ reg = <0x6a>;
+ };
+};
+
&lpi2c2 {
- #address-cells = <1>;
- #size-cells = <0>;
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_lpi2c2>;
};
};
};
+
+ adp5585: io-expander@34 {
+ compatible = "adi,adp5585-00", "adi,adp5585";
+ reg = <0x34>;
+ vdd-supply = <&buck4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-reserved-ranges = <5 1>;
+ #pwm-cells = <3>;
+ };
};
&lpi2c3 {
- #address-cells = <1>;
- #size-cells = <0>;
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c3>;
status = "okay";
};
+&micfil {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_pdm>;
+ pinctrl-1 = <&pinctrl_pdm_sleep>;
+ assigned-clocks = <&clk IMX93_CLK_PDM>;
+ assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+ assigned-clock-rates = <49152000>;
+ status = "okay";
+};
+
&mu1 {
status = "okay";
};
status = "okay";
};
+&sai1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_sai1>;
+ pinctrl-1 = <&pinctrl_sai1_sleep>;
+ assigned-clocks = <&clk IMX93_CLK_SAI1>;
+ assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+ assigned-clock-rates = <12288000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
&usbotg1 {
dr_mode = "otg";
hnp-disable;
status = "okay";
};
+&xcvr {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_spdif>;
+ pinctrl-1 = <&pinctrl_spdif_sleep>;
+ assigned-clocks = <&clk IMX93_CLK_SPDIF>,
+ <&clk IMX93_CLK_AUDIO_XCVR>;
+ assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>,
+ <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+ assigned-clock-rates = <12288000>, <200000000>;
+ status = "okay";
+};
+
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
>;
};
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
+ MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
pinctrl_lpi2c2: lpi2c2grp {
fsl,pins = <
MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
>;
};
+ pinctrl_pdm: pdmgrp {
+ fsl,pins = <
+ MX93_PAD_PDM_CLK__PDM_CLK 0x31e
+ MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x31e
+ MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x31e
+ >;
+ };
+
+ pinctrl_pdm_sleep: pdmsleepgrp {
+ fsl,pins = <
+ MX93_PAD_PDM_CLK__GPIO1_IO08 0x31e
+ MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09 0x31e
+ MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e
+ MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e
+ MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x31e
+ MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x31e
+ >;
+ };
+
+ pinctrl_sai1_sleep: sai1sleepgrp {
+ fsl,pins = <
+ MX93_PAD_SAI1_TXC__GPIO1_IO12 0x51e
+ MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x51e
+ MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x51e
+ MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x51e
+ >;
+ };
+
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
>;
};
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__SPDIF_IN 0x31e
+ MX93_PAD_GPIO_IO23__SPDIF_OUT 0x31e
+ >;
+ };
+
+ pinctrl_spdif_sleep: spdifsleepgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e
+ MX93_PAD_GPIO_IO23__GPIO2_IO23 0x31e
+ >;
+ };
+
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx93.dtsi"
+
+/ {
+ model = "NXP i.MX93 14X14 EVK board";
+ compatible = "fsl,imx93-14x14-evk", "fsl,imx93";
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ alloc-ranges = <0 0x80000000 0 0x40000000>;
+ size = <0 0x10000000>;
+ linux,cma-default;
+ };
+
+ vdev0vring0: vdev0vring0@a4000000 {
+ reg = <0 0xa4000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@a4008000 {
+ reg = <0 0xa4008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: vdev1vring0@a4010000 {
+ reg = <0 0xa4010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: vdev1vring1@a4018000 {
+ reg = <0 0xa4018000 0 0x8000>;
+ no-map;
+ };
+
+ rsc_table: rsc-table@2021e000 {
+ reg = <0 0x2021e000 0 0x1000>;
+ no-map;
+ };
+
+ vdevbuffer: vdevbuffer@a4020000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa4020000 0 0x100000>;
+ no-map;
+ };
+ };
+
+ reg_can1_stby: regulator-can1-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can1-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6524_2 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can1_en>;
+ };
+
+ reg_can1_en: regulator-can1-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can1-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6524_2 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can2_stby: regulator-can2-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6524_2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can2_en>;
+ };
+
+ reg_can2_en: regulator-can2-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6524_2 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ off-on-delay-us = <12000>;
+ };
+
+ reg_vdd_12v: regulator-vdd-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "reg_vdd_12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_vref_1v8: regulator-adc-vref {
+ compatible = "regulator-fixed";
+ regulator-name = "vref_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&cm33 {
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu1 0 1>,
+ <&mu1 1 1>,
+ <&mu1 3 1>;
+ memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy2>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ eee-broken-1000t;
+ reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ realtek,clkout-disable;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_stby>;
+ status = "okay";
+};
+
+&lpi2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ status = "okay";
+
+ lsm6dsm@6a {
+ compatible = "st,lsm6dso";
+ reg = <0x6a>;
+ };
+};
+
+&lpi2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ status = "okay";
+
+ pcal6524_2: gpio@20 {
+ compatible = "nxp,pcal6524";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pcal6524: gpio@22 {
+ compatible = "nxp,pcal6524";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcal6524>;
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&lpi2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ status = "okay";
+};
+
+&lpuart1 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&mu1 {
+ status = "okay";
+};
+
+&mu2 {
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ disable-over-current;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ no-mmc;
+ status = "okay";
+};
+
+&wdog3 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX93_PAD_PDM_CLK__CAN1_TX 0x139e
+ MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO25__CAN2_TX 0x139e
+ MX93_PAD_GPIO_IO27__CAN2_RX 0x139e
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
+ MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <
+ MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
+ MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_pcal6524: pcal6524grp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e
+ MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e
+ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
+ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
+ MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
+ MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
+ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e
+ MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
+ MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e
+ MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e
+ MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e
+ MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e
+ MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e
+ MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ MX93_PAD_DAP_TDI__LPUART5_RX 0x31e
+ MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+};
};
&lpi2c2 {
- #address-cells = <1>;
- #size-cells = <0>;
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c2>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx93-kontron-osm-s.dtsi"
+
+/ {
+ model = "Kontron BL i.MX93 OSM-S";
+ compatible = "kontron,imx93-bl-osm-s", "kontron,imx93-osm-s", "fsl,imx93";
+
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ pwm-beeper {
+ compatible = "pwm-beeper";
+ pwms = <&tpm6 1 5000 0>;
+ };
+
+ reg_vcc_panel: regulator-vcc-panel {
+ compatible = "regulator-fixed";
+ gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VCC_PANEL";
+ };
+};
+
+&eqos { /* Second ethernet (OSM-S ETH_B) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos_rgmii>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id4f51.e91b";
+ reg = <1>;
+ reset-assert-us = <10000>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fec { /* First ethernet (OSM-S ETH_A) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_rgmii>;
+ phy-connection-type = "rgmii-id";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-id4f51.e91b";
+ reg = <1>;
+ reset-assert-us = <10000>;
+ reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&flexcan1 {
+ status = "okay";
+};
+
+&lpi2c2 {
+ status = "okay";
+
+ gpio_expander_dio: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "DIO1_OUT","DIO1_IN", "DIO2_OUT","DIO2_IN",
+ "DIO3_OUT","DIO3_IN", "DIO4_OUT","DIO4_IN";
+ interrupt-parent = <&gpio4>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&lpspi8 {
+ assigned-clocks = <&clk IMX93_CLK_LPSPI8>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+ assigned-clock-rates = <100000000>;
+ status = "okay";
+
+ eeram@0 {
+ compatible = "microchip,48l640";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&lpuart1 {
+ status = "okay";
+};
+
+&lpuart7 {
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&lpuart6 {
+ linux,rs485-enabled-at-boot-time;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&tpm6 {
+ status = "okay";
+};
+
+&usbotg1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+
+ usb1@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ };
+};
+
+&usbotg2 {
+ adp-disable;
+ hnp-disable;
+ srp-disable;
+ disable-over-current;
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+};
+
+&usdhc2 {
+ vmmc-supply = <®_vdd_3v3>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx93.dtsi"
+
+/ {
+ model = "Kontron OSM-S i.MX93";
+ compatible = "kontron,imx93-osm-s", "fsl,imx93";
+
+ aliases {
+ rtc0 = &rv3028;
+ rtc1 = &bbnsm_rtc;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ reg_usdhc2_vcc: regulator-usdhc2-vcc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "VCC_SDIO_A";
+ };
+
+ reg_vdd_carrier: regulator-vdd-carrier {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "VDD_CARRIER";
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&flexcan1 { /* OSM-S CAN_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&flexcan2 { /* OSM-S CAN_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1>;
+ gpio-line-names = "", "", "I2C_A_SCL", "I2C_A_SDA",
+ "UART_CON_RX", "UART_CON_TX", "UART_C_RX", "UART_C_TX",
+ "CAN_A_TX", "CAN_A_RX", "GPIO_A_0", "SPI_A_CS0",
+ "SPI_A_SDI", "SPI_A_SCK","SPI_A_SDO";
+};
+
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio2>;
+ gpio-line-names = "I2C_B_SDA", "I2C_B_SCL", "GPIO_B_1", "GPIO_A_2",
+ "UART_B_TX", "UART_B_RX", "UART_B_RTS", "UART_B_CTS",
+ "UART_A_TX", "UART_A_RX", "UART_A_RTS", "UART_A_CTS",
+ "SPI_B_CS0", "SPI_B_SDI", "SPI_B_SDO", "SPI_B_SCK",
+ "I2S_BITCLK", "I2S_MCLK", "GPIO_A_1", "I2S_A_DATA_OUT",
+ "I2S_A_DATA_IN", "PWM_2", "GPIO_A_3", "PWM_1",
+ "PWM_0", "CAN_B_TX", "I2S_LRCLK", "CAN_B_RX", "GPIO_A_4",
+ "GPIO_A_5";
+};
+
+&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio3>;
+ gpio-line-names = "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+ "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "SDIO_B_CLK", "SDIO_B_CMD", "SDIO_B_D0", "SDIO_B_D1",
+ "SDIO_B_D2", "SDIO_B_D3", "GPIO_A_6", "GPIO_A_7";
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio4>;
+ gpio-line-names = "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD4", "ETH_B_TXD3",
+ "ETH_B_TXD2", "ETH_B_TXD1", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+ "ETH_B_RX_CTL", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
+ "ETH_B_RXD2", "ETH_B_RXD3", "ETH_MDC", "ETH_MDIO",
+ "ETH_A_TXD3", "ETH_A_TXD2", "ETH_A_TXD1", "ETH_A_TXD0",
+ "ETH_A_TX_EN", "ETH_A_TX_CLK", "ETH_A_RX_CTL", "ETH_A_RX_CLK",
+ "ETH_A_RXD0", "ETH_A_RXD1", "ETH_A_RXD2", "ETH_A_RXD3",
+ "GPIO_B_0", "CARRIER_PWR_EN";
+};
+
+&lpi2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ status = "okay";
+
+ pca9451: pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ nxp,i2c-lt-enable;
+
+ regulators {
+ reg_vdd_soc: BUCK1 { /* dual phase with BUCK3 */
+ regulator-name = "+0V8_VDD_SOC (BUCK1)";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ reg_vddq_ddr: BUCK2 {
+ regulator-name = "+0V6_VDDQ_DDR (BUCK2)";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ reg_vdd_3v3: BUCK4 {
+ regulator-name = "+3V3 (BUCK4)";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdd_1v8: BUCK5 {
+ regulator-name = "+1V8 (BUCK5)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_dram: BUCK6 {
+ regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_snvs: LDO1 {
+ regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdd_ana: LDO4 {
+ regulator-name = "+0V8_VDD_ANA (LDO4)";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_sd: LDO5 {
+ regulator-name = "NVCC_SD (LDO5)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "onnn,n24s64b", "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ size = <8192>;
+ num-addresses = <1>;
+ };
+
+ rv3028: rtc@52 {
+ compatible = "microcrystal,rv3028";
+ reg = <0x52>;
+ };
+};
+
+&lpi2c2 { /* OSM-S I2C_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+};
+
+&lpi2c3 { /* OSM-S I2C_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+};
+
+&lpspi1 { /* OSM-S SPI_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpspi1>;
+ cs-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+};
+
+&lpspi8 { /* OSM-S SPI_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpspi8>;
+ cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&lpuart1 { /* OSM-S UART_CON */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+&lpuart2 { /* OSM-S UART_C */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+&lpuart6 { /* OSM-S UART_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart6>;
+};
+
+&lpuart7 { /* OSM-S UART_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart7>;
+};
+
+&tpm3 { /* OSM-S PWM_0 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm3>;
+};
+
+&tpm4 { /* OSM-S PWM_2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm4>;
+};
+
+&tpm6 { /* OSM-S PWM_1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm6>;
+};
+
+&usdhc1 { /* eMMC */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vmmc-supply = <®_vdd_3v3>;
+ vqmmc-supply = <®_vdd_1v8>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 { /* OSM-S SDIO_A */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ vmmc-supply = <®_usdhc2_vcc>;
+ cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 { /* OSM-S SDIO_B */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ vqmmc-supply = <®_vdd_1v8>;
+};
+
+&wdog3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet_rgmii: enetrgmiigrp {
+ fsl,pins = <
+ MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e /* ETH_MDC */
+ MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e /* ETH_MDIO */
+ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e /* ETH_A_(S)(R)(G)MII_RXD0 */
+ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e /* ETH_A_(S)(R)(G)MII_RXD1 */
+ MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e /* ETH_A_(R)(G)MII_RXD2 */
+ MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e /* ETH_A_(R)(G)MII_RXD3 */
+ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe /* ETH_A_(R)(G)MII_RX_CLK */
+ MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+ MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e /* ETH_A_(S)(R)(G)MII_TXD0 */
+ MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e /* ETH_A_(S)(R)(G)MII_TXD1 */
+ MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e /* ETH_A_(S)(R)(G)MII_TXD2 */
+ MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e /* ETH_A_(S)(R)(G)MII_TXD3 */
+ MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe /* ETH_A_(R)(G)MII_TX_CLK */
+ MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+ >;
+ };
+
+ pinctrl_eqos_rgmii: eqosrgmiigrp {
+ fsl,pins = <
+ MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e /* ETH_B_MDC */
+ MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e /* ETH_B_MDIO */
+ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e /* ETH_B_(S)(R)(G)MII_RXD0 */
+ MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e /* ETH_B_(S)(R)(G)MII_RXD1 */
+ MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e /* ETH_B_(R)(G)MII_RXD2 */
+ MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e /* ETH_B_(R)(G)MII_RXD3 */
+ MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x57e /* ETH_B_(R)(G)MII_RX_CLK */
+ MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e /* ETH_B_(R)(G)MII_RX_DV(_ER) */
+ MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e /* ETH_B_(S)(R)(G)MII_TXD0 */
+ MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e /* ETH_B_(S)(R)(G)MII_TXD1 */
+ MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e /* ETH_B_(S)(R)(G)MII_TXD2 */
+ MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e /* ETH_B_(S)(R)(G)MII_TXD3 */
+ MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x57e /* ETH_B_(R)(G)MII_TX_CLK */
+ MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e /* ETH_B_(R)(G)MII_TX_EN(_ER) */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX93_PAD_PDM_CLK__CAN1_TX 0x139e /* CAN_A_TX */
+ MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e /* CAN_A_RX */
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO25__CAN2_TX 0x139e /* CAN_B_TX */
+ MX93_PAD_GPIO_IO27__CAN2_RX 0x139e /* CAN_B_RX */
+ >;
+ };
+
+ pinctrl_gpio1: gpio1grp {
+ fsl,pins = <
+ MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e /* GPIO_A_0 */
+ >;
+ };
+
+ pinctrl_gpio2: gpio2grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO18__GPIO2_IO18 0x31e /* GPIO_A_1 */
+ MX93_PAD_GPIO_IO03__GPIO2_IO03 0x31e /* GPIO_A_2 */
+ MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e /* GPIO_A_3 */
+ MX93_PAD_GPIO_IO28__GPIO2_IO28 0x31e /* GPIO_A_4 */
+ MX93_PAD_GPIO_IO29__GPIO2_IO29 0x31e /* GPIO_A_5 */
+ MX93_PAD_GPIO_IO02__GPIO2_IO02 0x31e /* GPIO_B_1 */
+ >;
+ };
+
+ pinctrl_gpio3: gpio3grp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e /* GPIO_A_6 */
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e /* GPIO_A_7 */
+ >;
+ };
+
+ pinctrl_gpio4: gpio4grp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x31e /* GPIO_B_0 */
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
+ MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <
+ MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e /* I2C_A_SCL */
+ MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e /* I2C_A_SDA */
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO01__LPI2C3_SCL 0x40000b9e /* I2C_B_SCL */
+ MX93_PAD_GPIO_IO00__LPI2C3_SDA 0x40000b9e /* I2C_B_SDA */
+ >;
+ };
+
+ pinctrl_lpspi1: lpspi1grp {
+ fsl,pins = <
+ MX93_PAD_SAI1_TXC__LPSPI1_SIN 0x3fe /* SPI_A_SDI_(IO0) */
+ MX93_PAD_SAI1_RXD0__LPSPI1_SOUT 0x3fe /* SPI_A_SDO_(IO1) */
+ MX93_PAD_SAI1_TXD0__LPSPI1_SCK 0x3fe /* SPI_A_SCK */
+ MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x3fe /* SPI_A_CS0# */
+ >;
+ };
+
+ pinctrl_lpspi8: lpspi8grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x3fe /* SPI_B_SDI */
+ MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x3fe /* SPI_B_SDO */
+ MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x3fe /* SPI_B_SCK */
+ MX93_PAD_GPIO_IO12__GPIO2_IO12 0x3fe /* SPI_B_CS0# */
+ >;
+ };
+
+ pinctrl_lpuart1: lpuart1grp {
+ fsl,pins = <
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x31e /* UART_CON_RX */
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e /* UART_CON_TX */
+ >;
+ };
+
+ pinctrl_lpuart2: lpuart2grp {
+ fsl,pins = <
+ MX93_PAD_UART2_RXD__LPUART2_RX 0x31e /* UART_C_RX */
+ MX93_PAD_UART2_TXD__LPUART2_TX 0x31e /* UART_C_TX */
+ >;
+ };
+
+ pinctrl_lpuart6: lpuart6grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e /* UART_B_RX */
+ MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e /* UART_B_TX */
+ MX93_PAD_GPIO_IO07__LPUART6_RTS_B 0x31e /* UART_B_CTS */
+ MX93_PAD_GPIO_IO06__LPUART6_CTS_B 0x31e /* UART_B_RTS */
+ >;
+ };
+
+ pinctrl_lpuart7: lpuart7grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO09__LPUART7_RX 0x31e /* UART_A_RX */
+ MX93_PAD_GPIO_IO08__LPUART7_TX 0x31e /* UART_A_TX */
+ MX93_PAD_GPIO_IO11__LPUART7_RTS_B 0x31e /* UART_A_CTS */
+ MX93_PAD_GPIO_IO10__LPUART7_CTS_B 0x31e /* UART_A_RTS */
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e /* SDIO_A_PWR_EN */
+ >;
+ };
+
+ pinctrl_reg_vdd_carrier: regvddcarriergrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e /* CARRIER_PWR_EN */
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO20__SAI3_RX_DATA00 0x31e /* I2S_A_DATA_IN */
+ MX93_PAD_GPIO_IO19__SAI3_TX_DATA00 0x31e /* I2S_A_DATA_OUT */
+ MX93_PAD_GPIO_IO17__SAI3_MCLK 0x31e /* I2S_MCLK */
+ MX93_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e /* I2S_LRCLK */
+ MX93_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e /* I2S_BITCLK */
+ >;
+ };
+
+ pinctrl_tpm3: tpm3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO24__TPM3_CH3 0x57e /* PWM_0 */
+ >;
+ };
+
+ pinctrl_tpm4: tpm4grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO21__TPM4_CH1 0x57e /* PWM_2 */
+ >;
+ };
+
+ pinctrl_tpm6: tpm6grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO23__TPM6_CH1 0x57e /* PWM_1 */
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582 /* SDIO_A_CLK */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382 /* SDIO_A_CMD */
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382 /* SDIO_A_D0 */
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382 /* SDIO_A_D1 */
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382 /* SDIO_A_D2 */
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382 /* SDIO_A_D3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e /* SDIO_A_CLK */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e /* SDIO_A_CMD */
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e /* SDIO_A_D0 */
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e /* SDIO_A_D1 */
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e /* SDIO_A_D2 */
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e /* SDIO_A_D3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe /* SDIO_A_CLK */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe /* SDIO_A_CMD */
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe /* SDIO_A_D0 */
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe /* SDIO_A_D1 */
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe /* SDIO_A_D2 */
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe /* SDIO_A_D3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e /* SDIO_A_CD# */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 /* SDIO_B_CLK */
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 /* SDIO_B_CMD */
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 /* SDIO_B_D0 */
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 /* SDIO_B_D1 */
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 /* SDIO_B_D2 */
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 /* SDIO_B_D3 */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e /* SDIO_B_CLK */
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e /* SDIO_B_CMD */
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e /* SDIO_B_D0 */
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e /* SDIO_B_D1 */
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e /* SDIO_B_D2 */
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e /* SDIO_B_D3 */
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe /* SDIO_B_CLK */
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe /* SDIO_B_CMD */
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe /* SDIO_B_D0 */
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe /* SDIO_B_D1 */
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe /* SDIO_B_D2 */
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe /* SDIO_B_D3 */
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0xc6
+ >;
+ };
+};
aliases {
eeprom0 = &eeprom0;
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
rtc0 = &pcf85063;
rtc1 = &bbnsm_rtc;
};
};
&gpio1 {
+ gpio-line-names =
+ /* 00 */ "", "", "USB_C_ALERT#", "PMIC_IRQ#",
+ /* 04 */ "", "", "", "",
+ /* 08 */ "", "", "", "BM2_TEMP_EVENT_MOD#",
+ /* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "", "",
+ /* 28 */ "", "", "", "";
+
expander-irq-hog {
gpio-hog;
gpios = <12 GPIO_ACTIVE_LOW>;
};
};
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio2>;
+
+ gpio-line-names =
+ /* 00 */ "SPI6_PCS0#", "", "", "",
+ /* 04 */ "", "", "", "",
+ /* 08 */ "", "FAN_RPM", "MIPI_CSI_TRIGGER", "MIPI_CSI_SYNC",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "X1_11", "X1_21", "X1_17", "X1_13",
+ /* 20 */ "X1_15", "X1_9", "", "",
+ /* 24 */ "", "", "X1_7", "",
+ /* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ /* 00 */ "SD2_CD#", "", "", "",
+ /* 04 */ "", "", "", "SD2_RST#",
+ /* 08 */ "", "", "", "",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+ /* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ /* 00 */ "", "", "", "",
+ /* 04 */ "", "", "", "",
+ /* 08 */ "", "", "", "",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "", "",
+ /* 28 */ "", "DP_INT", "", "";
+};
+
&lpi2c3 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
};
+&pcf85063 {
+ /* RTC_EVENT# from SoM is connected on mainboard */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcf85063>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+ /* TEMP_EVENT# from SoM is connected on mainboard */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_temp_sensor_som>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
&tpm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm5>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
- hub_2_0: hub@1 {
+ hub_2_0: usb-hub@1 {
compatible = "usb424,2517";
reg = <1>;
reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
pinctrl_eqos: eqosgrp {
fsl,pins = <
/* PD | FSEL_2 | DSE X4 */
- MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e
- MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000051e
- /* PD | FSEL_2 | DSE X6 */
- MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
- MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
- MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
- MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
- /* PD | FSEL_3 | DSE X6 */
- MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe
- MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
+ MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e
+ /* SION | HYS | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000111e
+ /* HYS | FSEL_0 | DSE no drive */
+ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x1000
+ MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x1000
+ MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x1000
+ MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x1000
+ MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x1000
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x1400
/* PD | FSEL_2 | DSE X4 */
- MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e
- MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e
- MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e
- MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e
- MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e
+ MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e
+ MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e
+ MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e
+ MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e
+ MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e
/* PD | FSEL_3 | DSE X3 */
MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
>;
pinctrl_eqos_phy: eqosphygrp {
fsl,pins = <
- MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1306
+ /* HYS | FSEL_0 | DSE no drive */
+ MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1000
>;
};
fsl,pins = <
/* PD | FSEL_2 | DSE X4 */
MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e
- MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000051e
- /* PD | FSEL_2 | DSE X6 */
- MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
- MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
- MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
- MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
- /* PD | FSEL_3 | DSE X6 */
- MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe
- MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
+ /* SION | HYS | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000111e
+ /* HYS | FSEL_0 | DSE no drive */
+ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x1000
+ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x1000
+ MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x1000
+ MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x1000
+ MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x1000
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x1400
/* PD | FSEL_2 | DSE X4 */
MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x51e
MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x51e
pinctrl_fec_phy: fecphygrp {
fsl,pins = <
- MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1306
+ /* HYS | FSEL_0 | DSE no drive */
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1000
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
- MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
- MX93_PAD_PDM_CLK__CAN1_TX 0x139e
+ /* HYS | PU | FSEL_0 | DSE no drive */
+ MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x1200
+ /* PU | FSEL_3 | DSE X4 */
+ MX93_PAD_PDM_CLK__CAN1_TX 0x039e
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
- MX93_PAD_GPIO_IO25__CAN2_TX 0x139e
- MX93_PAD_GPIO_IO27__CAN2_RX 0x139e
+ /* HYS | PU | FSEL_0 | DSE no drive */
+ MX93_PAD_GPIO_IO27__CAN2_RX 0x1200
+ /* PU | FSEL_3 | DSE X4 */
+ MX93_PAD_GPIO_IO25__CAN2_TX 0x039e
+ >;
+ };
+
+ pinctrl_gpio2: gpio2grp {
+ fsl,pins = <
+ /* HYS | PD | FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO16__GPIO2_IO16 0x151e
+ MX93_PAD_GPIO_IO17__GPIO2_IO17 0x151e
+ MX93_PAD_GPIO_IO18__GPIO2_IO18 0x151e
+ MX93_PAD_GPIO_IO19__GPIO2_IO19 0x151e
+ MX93_PAD_GPIO_IO20__GPIO2_IO20 0x151e
+ MX93_PAD_GPIO_IO21__GPIO2_IO21 0x151e
+ MX93_PAD_GPIO_IO26__GPIO2_IO26 0x151e
+ >;
+ };
+
+ pinctrl_jtag: jtaggrp {
+ fsl,pins = <
+ MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x051e
+ MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x1200
+ MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x031e
+ MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x1200
>;
};
pinctrl_lpi2c3: lpi2c3grp {
fsl,pins = <
- MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
- MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ /* SION | HYS | OD | FSEL_3 | DSE X4 */
+ MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x4000199e
+ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x4000199e
>;
};
pinctrl_lpi2c5: lpi2c5grp {
fsl,pins = <
- MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e
- MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e
+ /* SION | HYS | OD | FSEL_3 | DSE X4 */
+ MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x4000199e
+ MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x4000199e
>;
};
pinctrl_lpspi6: lpspi6grp {
fsl,pins = <
- MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x3fe
- MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x3fe
- MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x3fe
- MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x3fe
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x011e
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x1400
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x051e
+ MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x051e
+ >;
+ };
+
+ pinctrl_pcf85063: pcf85063grp {
+ fsl,pins = <
+ MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x1000
+ >;
+ };
+
+ pinctrl_mipi_csi: mipicsigrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x051e /* MCLK */
+ MX93_PAD_GPIO_IO10__GPIO2_IO10 0x051e /* TRIGGER */
+ MX93_PAD_GPIO_IO11__GPIO2_IO11 0x1400 /* SYNC */
>;
};
pinctrl_pexp_irq: pexpirqgrp {
fsl,pins = <
- MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1306
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1000
>;
};
pinctrl_pwmfan: pwmfangrp {
fsl,pins = <
- MX93_PAD_GPIO_IO09__GPIO2_IO09 0x1306
+ /* HYS | PU | FSEL_0 | no DSE */
+ MX93_PAD_GPIO_IO09__GPIO2_IO09 0x1200
+ >;
+ };
+
+ pinctrl_temp_sensor_som: tempsensorsomgrp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | no DSE */
+ MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x1000
+ >;
+ };
+
+ pinctrl_tc9595: tc9595-grp {
+ fsl,pins = <
+ /* HYS | PD | FSEL_0 | no DSE */
+ MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x1400
>;
};
pinctrl_tpm5: tpm5grp {
fsl,pins = <
- MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e
+ MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e
>;
};
pinctrl_tpm6: tpm6grp {
fsl,pins = <
- MX93_PAD_GPIO_IO08__TPM6_CH0 0x57e
+ MX93_PAD_GPIO_IO08__TPM6_CH0 0x57e
>;
};
pinctrl_typec: typecgrp {
fsl,pins = <
- MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1306
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1000
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
- MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x011e
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX93_PAD_UART2_TXD__LPUART2_TX 0x31e
- MX93_PAD_UART2_RXD__LPUART2_RX 0x31e
- MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x51e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_UART2_RXD__LPUART2_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_UART2_TXD__LPUART2_TX 0x011e
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x011e
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
- MX93_PAD_GPIO_IO14__LPUART3_TX 0x31e
- MX93_PAD_GPIO_IO15__LPUART3_RX 0x31e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_GPIO_IO15__LPUART3_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO14__LPUART3_TX 0x011e
>;
};
pinctrl_uart6: uart6grp {
fsl,pins = <
- MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e
- MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_GPIO_IO05__LPUART6_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO04__LPUART6_TX 0x011e
>;
};
pinctrl_uart8: uart8grp {
fsl,pins = <
- MX93_PAD_GPIO_IO12__LPUART8_TX 0x31e
- MX93_PAD_GPIO_IO13__LPUART8_RX 0x31e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_GPIO_IO13__LPUART8_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO12__LPUART8_TX 0x011e
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
- MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x1000
>;
};
+ /* enable SION for data and cmd pad due to ERR052021 */
pinctrl_usdhc2_hs: usdhc2hsgrp {
fsl,pins = <
- /* HYS | PD | PU | FSEL_3 | DSE X5 */
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x17be
- /* HYS | PD | PU | FSEL_3 | DSE X4 */
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
- /* HYS | PD | PU | FSEL_3 | DSE X3 */
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
- /* PD | PU | FSEL_2 | DSE X3 */
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e
+ /* PD | FSEL_3 | DSE X5 */
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x05be
+ /* HYS | PU | FSEL_3 | DSE X4 */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
+ /* HYS | PU | FSEL_3 | DSE X3 */
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
+ /* FSEL_2 | DSE X3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e
>;
};
+ /* enable SION for data and cmd pad due to ERR052021 */
pinctrl_usdhc2_uhs: usdhc2uhsgrp {
fsl,pins = <
- /* HYS | PD | PU | FSEL_3 | DSE X6 */
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe
- /* HYS | PD | PU | FSEL_3 | DSE X4 */
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e
- /* PD | PU | FSEL_2 | DSE X3 */
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e
+ /* PD | FSEL_3 | DSE X6 */
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x05fe
+ /* HYS | PU | FSEL_3 | DSE X4 */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e
+ /* FSEL_2 | DSE X3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e
>;
};
};
aliases {
eeprom0 = &eeprom0;
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
rtc0 = &pcf85063;
rtc1 = &bbnsm_rtc;
};
};
&gpio1 {
+ gpio-line-names =
+ /* 00 */ "", "", "USB_C_ALERT#", "PMIC_IRQ#",
+ /* 04 */ "", "", "", "",
+ /* 08 */ "", "", "", "BM2_TEMP_EVENT_MOD#",
+ /* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "", "",
+ /* 28 */ "", "", "", "";
+
expander-irq-hog {
gpio-hog;
gpios = <12 GPIO_ACTIVE_LOW>;
};
};
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio2>;
+
+ gpio-line-names =
+ /* 00 */ "", "", "", "",
+ /* 04 */ "", "", "", "AFE_RESET#",
+ /* 08 */ "AFE_SYNC", "AFE_DRDY", "MIPI_CSI_TRIGGER", "MIPI_CSI_SYNC",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "X1_19", "X1_29", "X1_25", "X1_21",
+ /* 20 */ "X1_23", "X1_17", "", "",
+ /* 24 */ "AFE_INT#", "", "X1_15", "",
+ /* 28 */ "", "", "", "";
+};
+
&gpio3 {
+ gpio-line-names =
+ /* 00 */ "SD2_CD#", "", "", "",
+ /* 04 */ "", "", "", "SD2_RST#",
+ /* 08 */ "", "", "", "",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+ /* 28 */ "", "", "", "";
+
ethphy-eqos-irq-hog {
gpio-hog;
gpios = <26 GPIO_ACTIVE_LOW>;
input;
- line-name = "ENET0_IRQ#";
+ line-name = "ENET1_INT#";
};
ethphy-fec-irq-hog {
gpio-hog;
gpios = <27 GPIO_ACTIVE_LOW>;
input;
- line-name = "ENET1_IRQ#";
+ line-name = "ENET2_INT#";
+ };
+};
+
+&gpio4 {
+ gpio-line-names =
+ /* 00 */ "", "", "", "",
+ /* 04 */ "", "", "", "",
+ /* 08 */ "", "", "", "",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "", "",
+ /* 28 */ "", "DP_INT", "", "";
+
+ dp-int-hog {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "DP_INT";
};
};
#gpio-cells = <2>;
vcc-supply = <®_3v3>;
gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
- "LCD_BL_EN", "DP_EN",
+ "LCD_BLT_EN", "DP_EN",
"MIPI_CSI_EN", "MIPI_CSI_RST#",
"USER_LED1", "USER_LED2";
};
};
};
+&lpspi6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpspi6>, <&pinctrl_lpspi6_cs>;
+ cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&lpuart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
};
&pcf85063 {
- /* RTC_EVENT# is connected on MBa93xxLA */
+ /* RTC_EVENT# from SoM is connected on mainboard */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcf85063>;
interrupt-parent = <&gpio1>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
};
+&se97_som {
+ /* TEMP_EVENT# from SoM is connected on mainboard */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_temp_sensor_som>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
&tpm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm5>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
- hub_2_0: hub@1 {
+ hub_2_0: usb-hub@1 {
compatible = "usb424,2517";
reg = <1>;
reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
};
&iomuxc {
+ pinctrl_afe: afegrp {
+ fsl,pins = <
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO07__GPIO2_IO07 0x011e
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO08__GPIO2_IO08 0x051e
+ /* HYS | PD */
+ MX93_PAD_GPIO_IO09__GPIO2_IO09 0x1400
+ /* HYS */
+ MX93_PAD_GPIO_IO24__GPIO2_IO24 0x1000
+ >;
+ };
+
pinctrl_eqos: eqosgrp {
fsl,pins = <
/* PD | FSEL_2 | DSE X4 */
- MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e
- MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000051e
- /* PD | FSEL_2 | DSE X6 */
- MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
- MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
- MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
- MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
- /* PD | FSEL_3 | DSE X6 */
- MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe
- MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
+ MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e
+ /* SION | HYS | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000111e
+ /* HYS | FSEL_0 | DSE no drive */
+ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x1000
+ MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x1000
+ MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x1000
+ MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x1000
+ MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x1000
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x1400
/* PD | FSEL_2 | DSE X4 */
- MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e
- MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e
- MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e
- MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e
- MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e
+ MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e
+ MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e
+ MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e
+ MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e
+ MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e
/* PD | FSEL_3 | DSE X3 */
MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
>;
pinctrl_eqos_phy: eqosphygrp {
fsl,pins = <
- MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1306
+ /* HYS | FSEL_0 | DSE no drive */
+ MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1000
>;
};
fsl,pins = <
/* PD | FSEL_2 | DSE X4 */
MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e
- MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000051e
- /* PD | FSEL_2 | DSE X6 */
- MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
- MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
- MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
- MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
- /* PD | FSEL_3 | DSE X6 */
- MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe
- MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
+ /* SION | HYS | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000111e
+ /* HYS | FSEL_0 | DSE no drive */
+ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x1000
+ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x1000
+ MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x1000
+ MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x1000
+ MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x1000
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x1400
/* PD | FSEL_2 | DSE X4 */
MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x51e
MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x51e
pinctrl_fec_phy: fecphygrp {
fsl,pins = <
- MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1306
+ /* HYS | FSEL_0 | DSE no drive */
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1000
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
- MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
- MX93_PAD_PDM_CLK__CAN1_TX 0x139e
+ /* HYS | PU | FSEL_0 | DSE no drive */
+ MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x1200
+ /* PU | FSEL_3 | DSE X4 */
+ MX93_PAD_PDM_CLK__CAN1_TX 0x039e
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
- MX93_PAD_GPIO_IO25__CAN2_TX 0x139e
- MX93_PAD_GPIO_IO27__CAN2_RX 0x139e
+ /* HYS | PU | FSEL_0 | DSE no drive */
+ MX93_PAD_GPIO_IO27__CAN2_RX 0x1200
+ /* PU | FSEL_3 | DSE X4 */
+ MX93_PAD_GPIO_IO25__CAN2_TX 0x039e
+ >;
+ };
+
+ pinctrl_gpio2: gpio2grp {
+ fsl,pins = <
+ /* HYS | PD | FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO16__GPIO2_IO16 0x151e
+ MX93_PAD_GPIO_IO17__GPIO2_IO17 0x151e
+ MX93_PAD_GPIO_IO18__GPIO2_IO18 0x151e
+ MX93_PAD_GPIO_IO19__GPIO2_IO19 0x151e
+ MX93_PAD_GPIO_IO20__GPIO2_IO20 0x151e
+ MX93_PAD_GPIO_IO21__GPIO2_IO21 0x151e
+ MX93_PAD_GPIO_IO26__GPIO2_IO26 0x151e
+ >;
+ };
+
+ pinctrl_jtag: jtaggrp {
+ fsl,pins = <
+ MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x051e
+ MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x1200
+ MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x031e
+ MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x1200
>;
};
pinctrl_lpi2c3: lpi2c3grp {
fsl,pins = <
- MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
- MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ /* SION | HYS | OD | FSEL_3 | DSE X4 */
+ MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x4000199e
+ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x4000199e
>;
};
pinctrl_lpi2c5: lpi2c5grp {
fsl,pins = <
- MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e
- MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e
+ /* SION | HYS | OD | FSEL_3 | DSE X4 */
+ MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x4000199e
+ MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x4000199e
+ >;
+ };
+
+ pinctrl_lpspi6: lpspi6grp {
+ fsl,pins = <
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x1400
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x051e
+ MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x051e
+ >;
+ };
+
+ pinctrl_lpspi6_cs: lpspi6csgrp {
+ fsl,pins = <
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO00__GPIO2_IO00 0x011e
+ >;
+ };
+
+ pinctrl_mipi_csi: mipicsigrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x051e /* MCLK */
+ MX93_PAD_GPIO_IO10__GPIO2_IO10 0x051e /* TRIGGER */
+ MX93_PAD_GPIO_IO11__GPIO2_IO11 0x1400 /* SYNC */
>;
};
pinctrl_pcf85063: pcf85063grp {
fsl,pins = <
- MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x1306
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x1000
>;
};
pinctrl_pexp_irq: pexpirqgrp {
fsl,pins = <
- MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1306
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1000
>;
};
pinctrl_tc9595: tc9595-grp {
fsl,pins = <
- /* DP_IRQ */
- MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x1306
+ /* HYS | PD | FSEL_0 | no DSE */
+ MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x1400
+ >;
+ };
+
+ pinctrl_temp_sensor_som: tempsensorsomgrp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | no DSE */
+ MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x1000
>;
};
pinctrl_tpm5: tpm5grp {
fsl,pins = <
- MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e
+ MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e
>;
};
pinctrl_typec: typecgrp {
fsl,pins = <
- MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1306
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1000
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
- MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x011e
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX93_PAD_UART2_TXD__LPUART2_TX 0x31e
- MX93_PAD_UART2_RXD__LPUART2_RX 0x31e
- MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x51e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_UART2_RXD__LPUART2_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_UART2_TXD__LPUART2_TX 0x011e
+ MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x011e
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
- MX93_PAD_GPIO_IO14__LPUART3_TX 0x31e
- MX93_PAD_GPIO_IO15__LPUART3_RX 0x31e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_GPIO_IO15__LPUART3_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO14__LPUART3_TX 0x011e
>;
};
pinctrl_uart6: uart6grp {
fsl,pins = <
- MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e
- MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_GPIO_IO05__LPUART6_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO04__LPUART6_TX 0x011e
>;
};
pinctrl_uart8: uart8grp {
fsl,pins = <
- MX93_PAD_GPIO_IO12__LPUART8_TX 0x31e
- MX93_PAD_GPIO_IO13__LPUART8_RX 0x31e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_GPIO_IO13__LPUART8_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX93_PAD_GPIO_IO12__LPUART8_TX 0x011e
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
- MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
+ /* HYS | FSEL_0 | No DSE */
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x1000
>;
};
+ /* enable SION for data and cmd pad due to ERR052021 */
pinctrl_usdhc2_hs: usdhc2hsgrp {
fsl,pins = <
- /* HYS | PD | PU | FSEL_3 | DSE X5 */
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x17be
- /* HYS | PD | PU | FSEL_3 | DSE X4 */
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
- /* HYS | PD | PU | FSEL_3 | DSE X3 */
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
- /* PD | PU | FSEL_2 | DSE X3 */
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e
+ /* PD | FSEL_3 | DSE X5 */
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x05be
+ /* HYS | PU | FSEL_3 | DSE X4 */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
+ /* HYS | PU | FSEL_3 | DSE X3 */
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
+ /* FSEL_2 | DSE X3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e
>;
};
+ /* enable SION for data and cmd pad due to ERR052021 */
pinctrl_usdhc2_uhs: usdhc2uhsgrp {
fsl,pins = <
- /* HYS | PD | PU | FSEL_3 | DSE X6 */
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe
- /* HYS | PD | PU | FSEL_3 | DSE X4 */
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e
- /* PD | PU | FSEL_2 | DSE X3 */
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e
+ /* PD | FSEL_3 | DSE X6 */
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x05fe
+ /* HYS | PU | FSEL_3 | DSE X4 */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e
+ /* FSEL_2 | DSE X3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e
>;
};
};
};
};
- reg_v1v8: regulator-v1v8 {
- compatible = "regulator-fixed";
- regulator-name = "V_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- reg_v3v3: regulator-v3v3 {
- compatible = "regulator-fixed";
- regulator-name = "V_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
/* SD2 RST# via PMIC SW_EN */
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <®_v3v3>;
+ vin-supply = <&buck4>;
gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adc1 {
- vref-supply = <®_v1v8>;
+ vref-supply = <&buck5>;
};
&flexspi1 {
reg = <0x1b>;
};
+ pca9451a: pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9451>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ /* V_0V8_SOC - hw developer guide: 0.75 .. 0.9 */
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ /* V_DDRQ - 1.1 LPDDR4 or 0.6 LPDDR4X */
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ /* V_3V3 - EEPROM, RTC, ... */
+ buck4: BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V8 - SPI NOR, eMMC, RAM VDD1... */
+ buck5: BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V1 - RAM VDD2*/
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V8_BBSM, fix 1.8 */
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_0V8_ANA */
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_SD2 - 3.3/1.8V USDHC2 io Voltage */
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
pcf85063: rtc@51 {
compatible = "nxp,pcf85063a";
reg = <0x51>;
reg = <0x53>;
pagesize = <16>;
read-only;
- vcc-supply = <®_v3v3>;
+ vcc-supply = <&buck4>;
};
eeprom1: eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
- vcc-supply = <®_v3v3>;
+ vcc-supply = <&buck4>;
};
/* protectable identification memory (part of M24C64-D @57) */
eeprom@5f {
compatible = "atmel,24c64d-wl";
reg = <0x5f>;
- vcc-supply = <®_v3v3>;
+ vcc-supply = <&buck4>;
};
imu@6a {
compatible = "st,ism330dhcx";
reg = <0x6a>;
- vdd-supply = <®_v3v3>;
- vddio-supply = <®_v3v3>;
+ vdd-supply = <&buck4>;
+ vddio-supply = <&buck4>;
};
};
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1>;
pinctrl-2 = <&pinctrl_usdhc1>;
+ vmmc-supply = <&buck4>;
+ vqmmc-supply = <&buck5>;
bus-width = <8>;
non-removable;
no-sdio;
&iomuxc {
pinctrl_flexspi1: flexspi1grp {
fsl,pins = <
- MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x3fe
- MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x3fe
- MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x3fe
- MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x3fe
- MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x3fe
- MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x3fe
+ /* FSEL 3 | DSE X6 */
+ MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x01fe
+ MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x01fe
+ /* HYS | PU | FSEL 3 | DSE X6 */
+ MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x13fe
+ MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x13fe
+ /* HYS | FSEL 3 | DSE X6 (external PU) */
+ MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x11fe
+ MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x11fe
>;
};
pinctrl_lpi2c1: lpi2c1grp {
fsl,pins = <
- MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
- MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ /* SION | OD | FSEL 3 | DSE X4 */
+ MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x4000199e
+ MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x4000199e
>;
};
pinctrl_pca9451: pca9451grp {
fsl,pins = <
- MX93_PAD_I2C2_SDA__GPIO1_IO03 0x1306
+ /* HYS | PU */
+ MX93_PAD_I2C2_SDA__GPIO1_IO03 0x1200
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
- MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x1306
+ /* FSEL 2 | DSE X2 */
+ MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x106
>;
};
+ /* enable SION for data and cmd pad due to ERR052021 */
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
- /* HYS | PU | PD | FSEL_3 | X5 */
- MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be
- MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17be
- /* HYS | PU | FSEL_3 | X5 */
- MX93_PAD_SD1_CMD__USDHC1_CMD 0x13be
- /* HYS | PU | FSEL_3 | X4 */
- MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x139e
- MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x139e
- MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x139e
- MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x139e
- MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x139e
- MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x139e
- MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x139e
- MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x139e
+ /* PD | FSEL 3 | DSE X5 */
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x5be
+ /* HYS | FSEL 0 | no drive */
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1000
+ /* HYS | FSEL 3 | X5 */
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x400011be
+ /* HYS | FSEL 3 | X4 */
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000119e
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000119e
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000119e
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000119e
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000119e
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000119e
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000119e
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000119e
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
+ /* PU | FSEL 1 | DSE X4 */
MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e
>;
};
enable-method = "psci";
#cooling-cells = <2>;
cpu-idle-states = <&cpu_pd_wait>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l0>;
};
A55_1: cpu@100 {
enable-method = "psci";
#cooling-cells = <2>;
cpu-idle-states = <&cpu_pd_wait>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l1>;
};
+ l2_cache_l0: l2-cache-l0 {
+ compatible = "cache";
+ cache-size = <65536>;
+ cache-line-size = <64>;
+ cache-sets = <256>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+
+ l2_cache_l1: l2-cache-l1 {
+ compatible = "cache";
+ cache-size = <65536>;
+ cache-line-size = <64>;
+ cache-sets = <256>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+
+ l3_cache: l3-cache {
+ compatible = "cache";
+ cache-size = <262144>;
+ cache-line-size = <64>;
+ cache-sets = <256>;
+ cache-level = <3>;
+ cache-unified;
+ };
};
osc_32k: clock-osc-32k {
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
dmas = <&edma1 29 0 5>;
dma-names = "rx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
clock-names = "ipg", "phy", "spba", "pll_ipg";
dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
#include "imx95.dtsi"
/ {
serial0 = &lpuart1;
};
+ bt_sco_codec: audio-codec-bt-sco {
+ #sound-dai-cells = <1>;
+ compatible = "linux,bt-sco";
+ };
+
chosen {
stdout-path = &lpuart1;
};
reg = <0x0 0x80000000 0 0x80000000>;
};
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ pwms = <&tpm6 2 4000000 PWM_POLARITY_INVERTED>;
+ cooling-levels = <64 128 192 255>;
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
};
};
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3_SW";
+ };
+
+ reg_audio_pwr: regulator-audio-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "audio-pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&i2c4_gpio_expander_21 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_audio_slot: regulator-audio-slot {
+ compatible = "regulator-fixed";
+ regulator-name = "audio-wm8962";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&i2c4_gpio_expander_21 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ status = "disabled";
+ };
+
reg_m2_pwr: regulator-m2-pwr {
compatible = "regulator-fixed";
regulator-name = "M.2-power";
enable-active-high;
off-on-delay-us = <12000>;
};
+
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&bt_sco_codec 1>;
+ };
+ };
+
+ sound-micfil {
+ compatible = "fsl,imx-audio-card";
+ model = "micfil-audio";
+
+ pri-dai-link {
+ link-name = "micfil hifi";
+ format = "i2s";
+ cpu {
+ sound-dai = <&micfil>;
+ };
+ };
+ };
+
+ sound-wm8962 {
+ compatible = "fsl,imx-audio-wm8962";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
+ model = "wm8962-audio";
+ audio-cpu = <&sai3>;
+ audio-codec = <&wm8962>;
+ hp-det-gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ audio-routing = "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC",
+ "IN1R", "AMIC";
+ };
+};
+
+&flexspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi1_reset>;
+ reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <200000000>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ };
+};
+
+&lpi2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c4>;
+ status = "okay";
+
+ wm8962: audio-codec@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&scmi_clk IMX95_CLK_SAI3>;
+ DCVDD-supply = <®_audio_pwr>;
+ DBVDD-supply = <®_audio_pwr>;
+ AVDD-supply = <®_audio_pwr>;
+ CPVDD-supply = <®_audio_pwr>;
+ MICVDD-supply = <®_audio_pwr>;
+ PLLVDD-supply = <®_audio_pwr>;
+ SPKVDD1-supply = <®_audio_pwr>;
+ SPKVDD2-supply = <®_audio_pwr>;
+ gpio-cfg = < 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0000 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x0000 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
+ };
+
+ i2c4_gpio_expander_21: gpio@21 {
+ compatible = "nxp,pcal6408";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_pcal6408>;
+ vcc-supply = <®_3p3v>;
+ };
};
&lpi2c7 {
status = "okay";
};
+&micfil {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdm>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX95_CLK_PDM>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <49152000>;
+ status = "okay";
+};
+
&mu7 {
status = "okay";
};
status = "okay";
};
+&sai1 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX95_CLK_SAI1>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <12288000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&sai3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX95_CLK_SAI3>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <12288000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc1>;
};
&scmi_iomuxc {
+ pinctrl_flexspi1: flexspi1grp {
+ fsl,pins = <
+ IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe
+ IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x3fe
+ IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x3fe
+ IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x3fe
+ IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x3fe
+ IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x3fe
+ IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x3fe
+ IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4 0x3fe
+ IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5 0x3fe
+ IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6 0x3fe
+ IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7 0x3fe
+ >;
+ };
+
+ pinctrl_flexspi1_reset: flexspi1-reset-grp {
+ fsl,pins = <
+ IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x3fe
+ >;
+ };
+
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11 0x31e
+ >;
+ };
+
+ pinctrl_i2c4_pcal6408: i2c4pcal6498grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x31e
+ >;
+ };
+
pinctrl_i2c7_pcal6524: i2c7pcal6524grp {
fsl,pins = <
IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16 0x31e
>;
};
+ pinctrl_lpi2c4: lpi2c4grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e
+ IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e
+ >;
+ };
+
pinctrl_lpi2c7: lpi2c7grp {
fsl,pins = <
IMX95_PAD_GPIO_IO08__LPI2C7_SDA 0x40000b9e
>;
};
+ pinctrl_pdm: pdmgrp {
+ fsl,pins = <
+ IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK 0x31e
+ IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x31e
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0 0x31e
+ IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK 0x31e
+ IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC 0x31e
+ IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0 0x31e
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK 0x31e
+ IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC 0x31e
+ IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0 0x31e
+ IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1 0x31e
+ IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK 0x31e
+ IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC 0x31e
+ IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0 0x31e
+ IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1 0x31e
+ IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2 0x31e
+ IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3 0x31e
+ IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK 0x31e
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x31e
+ IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e
+ IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e
+ IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x31e
+ IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x31e
+ >;
+ };
+
+ pinctrl_tpm6: tpm6grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO19__TPM6_CH2 0x51e
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e
>;
};
};
+
+&thermal_zones {
+ a55-thermal {
+ trips {
+ atrip2: trip2 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ atrip3: trip3 {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ atrip4: trip4 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&atrip2>;
+ cooling-device = <&fan0 0 1>;
+ };
+
+ map2 {
+ trip = <&atrip3>;
+ cooling-device = <&fan0 1 2>;
+ };
+
+ map3 {
+ trip = <&atrip4>;
+ cooling-device = <&fan0 2 3>;
+ };
+ };
+ };
+};
+
+&tpm6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm6>;
+ status = "okay";
+};
* Copyright 2024 NXP
*/
+#include <dt-bindings/dma/fsl-edma.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
};
};
+ dummy: clock-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "dummy";
+ };
+
clk_ext1: clock-ext1 {
compatible = "fixed-clock";
#clock-cells = <0>;
firmware {
scmi {
compatible = "arm,scmi";
- mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>;
+ mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>, <&mu2 5 1>;
shmem = <&scmi_buf0>, <&scmi_buf1>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
};
- thermal-zones {
+ thermal_zones: thermal-zones {
a55-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
#address-cells = <1>;
#size-cells = <1>;
+ edma2: dma-controller@42000000 {
+ compatible = "fsl,imx95-edma5";
+ reg = <0x42000000 0x210000>;
+ #dma-cells = <3>;
+ dma-channels = <64>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+ clock-names = "dma";
+ };
+
+ edma3: dma-controller@42210000 {
+ compatible = "fsl,imx95-edma5";
+ reg = <0x42210000 0x210000>;
+ #dma-cells = <3>;
+ dma-channels = <64>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+ clock-names = "dma";
+ };
+
mu7: mailbox@42430000 {
compatible = "fsl,imx95-mu";
reg = <0x42430000 0x10000>;
clock-names = "per", "ipg";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
clock-names = "per", "ipg";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
clocks = <&scmi_clk IMX95_CLK_LPSPI3>,
<&scmi_clk IMX95_CLK_BUSWAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
clocks = <&scmi_clk IMX95_CLK_LPSPI4>,
<&scmi_clk IMX95_CLK_BUSWAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk IMX95_CLK_LPUART3>;
clock-names = "ipg";
+ dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk IMX95_CLK_LPUART4>;
clock-names = "ipg";
+ dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk IMX95_CLK_LPUART5>;
clock-names = "ipg";
+ dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk IMX95_CLK_LPUART6>;
clock-names = "ipg";
+ dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ flexcan2: can@425b0000 {
+ compatible = "fsl,imx95-flexcan";
+ reg = <0x425b0000 0x10000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+ <&scmi_clk IMX95_CLK_CAN2>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&scmi_clk IMX95_CLK_CAN2>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ status = "disabled";
+ };
+
+ flexcan3: can@42600000 {
+ compatible = "fsl,imx95-flexcan";
+ reg = <0x42600000 0x10000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+ <&scmi_clk IMX95_CLK_CAN3>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&scmi_clk IMX95_CLK_CAN3>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ status = "disabled";
+ };
+
+ flexspi1: spi@425e0000 {
+ compatible = "nxp,imx8mm-fspi";
+ reg = <0x425e0000 0x10000>, <0x28000000 0x8000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>,
+ <&scmi_clk IMX95_CLK_FLEXSPI1>;
+ clock-names = "fspi_en", "fspi";
+ assigned-clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+ assigned-clock-rates = <200000000>;
+ status = "disabled";
+ };
+
+ sai3: sai@42650000 {
+ compatible = "fsl,imx95-sai";
+ reg = <0x42650000 0x10000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+ <&scmi_clk IMX95_CLK_SAI3>, <&dummy>,
+ <&dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai4: sai@42660000 {
+ compatible = "fsl,imx95-sai";
+ reg = <0x42660000 0x10000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+ <&scmi_clk IMX95_CLK_SAI4>, <&dummy>,
+ <&dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 68 0 FSL_EDMA_RX>, <&edma2 67 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai5: sai@42670000 {
+ compatible = "fsl,imx95-sai";
+ reg = <0x42670000 0x10000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+ <&scmi_clk IMX95_CLK_SAI5>, <&dummy>,
+ <&dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 70 0 FSL_EDMA_RX>, <&edma2 69 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ xcvr: xcvr@42680000 {
+ compatible = "fsl,imx95-xcvr";
+ reg = <0x42680000 0x800>, <0x42680800 0x400>,
+ <0x42680c00 0x080>, <0x42680e00 0x080>;
+ reg-names = "ram", "regs", "rxfifo", "txfifo";
+ interrupts = /* XCVR IRQ 0 */
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ /* XCVR IRQ 1 */
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+ <&scmi_clk IMX95_CLK_SPDIF>,
+ <&dummy>,
+ <&scmi_clk IMX95_CLK_AUDIOXCVR>;
+ clock-names = "ipg", "phy", "spba", "pll_ipg";
+ dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk IMX95_CLK_LPUART7>;
clock-names = "ipg";
+ dmas = <&edma2 26 0 FSL_EDMA_RX>, <&edma2 25 0 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk IMX95_CLK_LPUART8>;
clock-names = "ipg";
+ dmas = <&edma2 28 0 FSL_EDMA_RX>, <&edma2 27 0 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clock-names = "per", "ipg";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
clock-names = "per", "ipg";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
clock-names = "per", "ipg";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
clock-names = "per", "ipg";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
clocks = <&scmi_clk IMX95_CLK_LPSPI5>,
<&scmi_clk IMX95_CLK_BUSWAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
clocks = <&scmi_clk IMX95_CLK_LPSPI6>,
<&scmi_clk IMX95_CLK_BUSWAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
clocks = <&scmi_clk IMX95_CLK_LPSPI7>,
<&scmi_clk IMX95_CLK_BUSWAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
clocks = <&scmi_clk IMX95_CLK_LPSPI8>,
<&scmi_clk IMX95_CLK_BUSWAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
#mbox-cells = <2>;
status = "disabled";
};
+
+ flexcan4: can@427c0000 {
+ compatible = "fsl,imx95-flexcan";
+ reg = <0x427c0000 0x10000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+ <&scmi_clk IMX95_CLK_CAN4>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&scmi_clk IMX95_CLK_CAN4>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ status = "disabled";
+ };
+
+ flexcan5: can@427d0000 {
+ compatible = "fsl,imx95-flexcan";
+ reg = <0x427d0000 0x10000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+ <&scmi_clk IMX95_CLK_CAN5>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&scmi_clk IMX95_CLK_CAN5>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ status = "disabled";
+ };
};
aips3: bus@42800000 {
#address-cells = <1>;
#size-cells = <1>;
+ edma1: dma-controller@44000000 {
+ compatible = "fsl,imx93-edma3";
+ reg = <0x44000000 0x200000>;
+ #dma-cells = <3>;
+ dma-channels = <31>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+ clock-names = "dma";
+ };
+
mu1: mailbox@44220000 {
compatible = "fsl,imx95-mu";
reg = <0x44220000 0x10000>;
clock-names = "per", "ipg";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX> ;
+ dma-names = "tx", "rx";
status = "disabled";
};
clock-names = "per", "ipg";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX> ;
+ dma-names = "tx", "rx";
status = "disabled";
};
clocks = <&scmi_clk IMX95_CLK_LPSPI1>,
<&scmi_clk IMX95_CLK_BUSAON>;
clock-names = "per", "ipg";
+ dmas = <&edma1 16 0 FSL_EDMA_RX>, <&edma1 17 0 0> ;
+ dma-names = "tx", "rx";
status = "disabled";
};
clocks = <&scmi_clk IMX95_CLK_LPSPI2>,
<&scmi_clk IMX95_CLK_BUSAON>;
clock-names = "per", "ipg";
+ dmas = <&edma1 18 0 FSL_EDMA_RX>, <&edma1 19 0 0> ;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk IMX95_CLK_LPUART1>;
clock-names = "ipg";
+ dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk IMX95_CLK_LPUART2>;
clock-names = "ipg";
+ dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ flexcan1: can@443a0000 {
+ compatible = "fsl,imx95-flexcan";
+ reg = <0x443a0000 0x10000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+ <&scmi_clk IMX95_CLK_CAN1>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&scmi_clk IMX95_CLK_CAN1>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ status = "disabled";
+ };
+
+ sai1: sai@443b0000 {
+ compatible = "fsl,imx95-sai";
+ reg = <0x443b0000 0x10000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>,
+ <&scmi_clk IMX95_CLK_SAI1>, <&dummy>,
+ <&dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ micfil: micfil@44520000 {
+ compatible = "fsl,imx95-micfil", "fsl,imx93-micfil";
+ reg = <0x44520000 0x10000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+ <&scmi_clk IMX95_CLK_PDM>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&dummy>;
+ clock-names = "ipg_clk", "ipg_clk_app",
+ "pll8k", "pll11k", "clkext3";
+ dmas = <&edma1 6 0 5>;
+ dma-names = "rx";
status = "disabled";
};
power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
status = "disabled";
};
+
+ netcmix_blk_ctrl: syscon@4c810000 {
+ compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon";
+ reg = <0x0 0x4c810000 0x0 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ assigned-clock-rates = <133333333>;
+ power-domains = <&scmi_devpd IMX95_PD_NETC>;
+ status = "disabled";
+ };
+
+ sai2: sai@4c880000 {
+ compatible = "fsl,imx95-sai";
+ reg = <0x0 0x4c880000 0x0 0x10000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>, <&dummy>,
+ <&scmi_clk IMX95_CLK_SAI2>, <&dummy>,
+ <&dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ power-domains = <&scmi_devpd IMX95_PD_NETC>;
+ dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ ddr-pmu@4e090dc0 {
+ compatible = "fsl,imx95-ddr-pmu", "fsl,imx93-ddr-pmu";
+ reg = <0x0 0x4e090dc0 0x0 0x200>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
};
reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>;
reset-assert-us = <500000>;
reset-deassert-us = <500>;
+ interrupt-parent = <&expander2>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
};
};
};
};
&i2c2 {
- clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
reg = <0x1f>;
};
+ /*
+ * TUSB8041 is at 0x41, but not connected by default
+ * Note: TUSB8041 only supports 100 kHz!
+ */
+
eeprom3: eeprom@57 {
compatible = "nxp,se97b", "atmel,24c02";
reg = <0x57>;
};
&i2c3 {
- clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_gpio>;
reg = <0xf0000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
pcsphy-handle = <&pcsphy6>;
+ pcs-handle = <&pcsphy6>;
};
mdio@f1000 {
reg = <0xf2000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
pcsphy-handle = <&pcsphy7>;
+ pcs-handle = <&pcsphy7>;
};
mdio@f3000 {
fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
ptp-timer = <&ptp_timer0>;
pcsphy-handle = <&pcsphy0>;
+ pcs-handle = <&pcsphy0>;
};
mdio@e1000 {
fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
ptp-timer = <&ptp_timer0>;
pcsphy-handle = <&pcsphy1>;
+ pcs-handle = <&pcsphy1>;
};
mdio@e3000 {
fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
ptp-timer = <&ptp_timer0>;
pcsphy-handle = <&pcsphy2>;
+ pcs-handle = <&pcsphy2>;
};
mdio@e5000 {
fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
ptp-timer = <&ptp_timer0>;
pcsphy-handle = <&pcsphy3>;
+ pcs-handle = <&pcsphy3>;
};
mdio@e7000 {
fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
ptp-timer = <&ptp_timer0>;
pcsphy-handle = <&pcsphy4>;
+ pcs-handle = <&pcsphy4>;
};
mdio@e9000 {
#size-cells = <1>;
ranges = <0 0 0 0x80000000>;
+ pinctrl: pinctrl@4009c240 {
+ compatible = "nxp,s32g2-siul2-pinctrl";
+ /* MSCR0-MSCR101 registers on siul2_0 */
+ reg = <0x4009c240 0x198>,
+ /* MSCR112-MSCR122 registers on siul2_1 */
+ <0x44010400 0x2c>,
+ /* MSCR144-MSCR190 registers on siul2_1 */
+ <0x44010480 0xbc>,
+ /* IMCR0-IMCR83 registers on siul2_0 */
+ <0x4009ca40 0x150>,
+ /* IMCR119-IMCR397 registers on siul2_1 */
+ <0x44010c1c 0x45c>,
+ /* IMCR430-IMCR495 registers on siul2_1 */
+ <0x440110f8 0x108>;
+
+ jtag_pins: jtag-pins {
+ jtag-grp0 {
+ pinmux = <0x0>;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <166>;
+ };
+
+ jtag-grp1 {
+ pinmux = <0x11>;
+ slew-rate = <166>;
+ };
+
+ jtag-grp2 {
+ pinmux = <0x40>;
+ input-enable;
+ bias-pull-down;
+ slew-rate = <166>;
+ };
+
+ jtag-grp3 {
+ pinmux = <0x23c0>,
+ <0x23d0>,
+ <0x2320>;
+ };
+
+ jtag-grp4 {
+ pinmux = <0x51>;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <166>;
+ };
+ };
+ };
+
uart0: serial@401c8000 {
compatible = "nxp,s32g2-linflexuart",
"fsl,s32v234-linflexuart";
};
&usdhc0 {
+ disable-wp;
status = "okay";
};
};
&usdhc0 {
+ disable-wp;
status = "okay";
};
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright 2021-2023 NXP
+ * Copyright 2021-2024 NXP
*
* Authors: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
* Ciprian Costea <ciprianmarian.costea@nxp.com>
#size-cells = <1>;
ranges = <0 0 0 0x80000000>;
+ pinctrl: pinctrl@4009c240 {
+ compatible = "nxp,s32g2-siul2-pinctrl";
+ /* MSCR0-MSCR101 registers on siul2_0 */
+ reg = <0x4009c240 0x198>,
+ /* MSCR112-MSCR122 registers on siul2_1 */
+ <0x44010400 0x2c>,
+ /* MSCR144-MSCR190 registers on siul2_1 */
+ <0x44010480 0xbc>,
+ /* IMCR0-IMCR83 registers on siul2_0 */
+ <0x4009ca40 0x150>,
+ /* IMCR119-IMCR397 registers on siul2_1 */
+ <0x44010c1c 0x45c>,
+ /* IMCR430-IMCR495 registers on siul2_1 */
+ <0x440110f8 0x108>;
+
+ jtag_pins: jtag-pins {
+ jtag-grp0 {
+ pinmux = <0x0>;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <166>;
+ };
+
+ jtag-grp1 {
+ pinmux = <0x11>;
+ slew-rate = <166>;
+ };
+
+ jtag-grp2 {
+ pinmux = <0x40>;
+ input-enable;
+ bias-pull-down;
+ slew-rate = <166>;
+ };
+
+ jtag-grp3 {
+ pinmux = <0x23c0>,
+ <0x23d0>,
+ <0x2320>;
+ };
+
+ jtag-grp4 {
+ pinmux = <0x51>;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <166>;
+ };
+ };
+ };
+
uart0: serial@401c8000 {
compatible = "nxp,s32g3-linflexuart",
"fsl,s32v234-linflexuart";
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright 2021-2023 NXP
+ * Copyright 2021-2024 NXP
*
* NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)
*/
&usdhc0 {
bus-width = <8>;
+ disable-wp;
status = "okay";
};
};
gic: interrupt-controller@7d001000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
};
cp0_mdio_pins: cp0-mdio-pins {
- marvell,pins = "mpp40", "mpp41";
+ marvell,pins = "mpp0", "mpp1";
marvell,function = "ge";
};
mt6357_pmic: pmic {
compatible = "mediatek,mt6357";
+ pmic_adc: adc {
+ compatible = "mediatek,mt6357-auxadc";
+ #io-channel-cells = <1>;
+ };
+
regulators {
mt6357_vproc_reg: buck-vproc {
regulator-name = "vproc";
interrupt-controller;
#interrupt-cells = <2>;
+ pmic_adc: adc {
+ compatible = "mediatek,mt6358-auxadc";
+ #io-channel-cells = <1>;
+ };
+
mt6358codec: mt6358codec {
compatible = "mediatek,mt6358-sound";
mediatek,dmic-mode = <0>; /* two-wires */
interrupt-controller;
#interrupt-cells = <2>;
+ pmic_adc: adc {
+ compatible = "mediatek,mt6359-auxadc";
+ #io-channel-cells = <1>;
+ };
+
mt6359codec: mt6359codec {
};
#pwm-cells = <2>;
};
+ serial@11002000 {
+ compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x100>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uart", "wakeup";
+ clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+ <&infracfg CLK_INFRA_UART0_CK>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ serial@11003000 {
+ compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x100>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uart", "wakeup";
+ clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+ <&infracfg CLK_INFRA_UART1_CK>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ serial@11004000 {
+ compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x100>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uart", "wakeup";
+ clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+ <&infracfg CLK_INFRA_UART2_CK>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
i2c@11007000 {
compatible = "mediatek,mt7981-i2c";
reg = <0 0x11007000 0 0x1000>,
status = "disabled";
};
+ spi@11009000 {
+ compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
+ reg = <0 0x11009000 0 0x1000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_CB_M_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_INFRA_SPI2_CK>,
+ <&infracfg CLK_INFRA_SPI2_HCK_CK>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi@1100a000 {
+ compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
+ reg = <0 0x1100a000 0 0x1000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_CB_M_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_INFRA_SPI0_CK>,
+ <&infracfg CLK_INFRA_SPI0_HCK_CK>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi@1100b000 {
+ compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_CB_M_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_INFRA_SPI1_CK>,
+ <&infracfg CLK_INFRA_SPI1_HCK_CK>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pio: pinctrl@11d00000 {
compatible = "mediatek,mt7981-pinctrl";
reg = <0 0x11d00000 0 0x1000>,
&dsi0 {
status = "okay";
- /delete-property/#size-cells;
- /delete-property/#address-cells;
/delete-node/panel@0;
- ports {
- port {
- dsi_out: endpoint {
- remote-endpoint = <&anx7625_in>;
- };
- };
- };
+};
+
+&dsi_out {
+ remote-endpoint = <&anx7625_in>;
};
&i2c0 {
backlight_lcd0: backlight_lcd0 {
compatible = "pwm-backlight";
pwms = <&pwm0 0 500000>;
- power-supply = <&bl_pp5000>;
+ power-supply = <®_vsys>;
enable-gpios = <&pio 176 0>;
brightness-levels = <0 1023>;
num-interpolated-steps = <1023>;
it6505_pp18_reg: regulator0 {
compatible = "regulator-fixed";
regulator-name = "it6505_pp18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
gpio = <&pio 178 0>;
enable-active-high;
+ vin-supply = <&pp1800_alw>;
};
lcd_pp3300: regulator1 {
regulator-boot-on;
};
- bl_pp5000: regulator2 {
- compatible = "regulator-fixed";
- regulator-name = "bl_pp5000";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
mmc1_fixed_power: regulator3 {
compatible = "regulator-fixed";
regulator-name = "mmc1_power";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ vin-supply = <&pp3300_alw>;
};
mmc1_fixed_io: regulator4 {
compatible = "regulator-fixed";
regulator-name = "mmc1_io";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ vin-supply = <&pp1800_alw>;
};
pp1800_alw: regulator5 {
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ vin-supply = <®_vsys>;
};
pp3300_alw: regulator6 {
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <®_vsys>;
};
/* system wide semi-regulated power rail from charger */
domain-supply = <&mt6358_vgpu_reg>;
};
-&soc_data {
- status = "okay";
-};
-
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
mfg_async: power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC {
reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>;
- clocks = <&topckgen CLK_TOP_MUX_MFG>;
- clock-names = "mfg";
#address-cells = <1>;
#size-cells = <0>;
#power-domain-cells = <1>;
phy-names = "dphy";
};
+ dpi0: dpi@14015000 {
+ compatible = "mediatek,mt8183-dpi";
+ reg = <0 0x14015000 0 0x1000>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DPI_IF>,
+ <&mmsys CLK_MM_DPI_MM>,
+ <&apmixedsys CLK_APMIXED_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
+ };
+
mutex: mutex@14016000 {
compatible = "mediatek,mt8183-disp-mutex";
reg = <0 0x14016000 0 0x1000>;
adsp_mem: memory@60000000 {
compatible = "shared-dma-pool";
- reg = <0 0x60000000 0 0xA00000>;
+ reg = <0 0x60000000 0 0x1000000>;
no-map;
};
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dpi_pins_default>;
pinctrl-1 = <&dpi_pins_sleep>;
- status = "okay";
+ /* TODO Re-enable after DP to Type-C port muxing can be described */
+ status = "disabled";
};
&dpi_out {
#include <dt-bindings/power/mt8186-power.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/mt8186-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
/ {
compatible = "mediatek,mt8186";
opp-900000000-3 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <850000>;
- opp-supported-hw = <0x8>;
+ opp-supported-hw = <0xcf>;
};
opp-900000000-4 {
opp-900000000-5 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <825000>;
- opp-supported-hw = <0x30>;
+ opp-supported-hw = <0x20>;
};
opp-950000000-3 {
opp-hz = /bits/ 64 <950000000>;
opp-microvolt = <900000>;
- opp-supported-hw = <0x8>;
+ opp-supported-hw = <0xcf>;
};
opp-950000000-4 {
opp-950000000-5 {
opp-hz = /bits/ 64 <950000000>;
opp-microvolt = <850000>;
- opp-supported-hw = <0x30>;
+ opp-supported-hw = <0x20>;
};
opp-1000000000-3 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <950000>;
- opp-supported-hw = <0x8>;
+ opp-supported-hw = <0xcf>;
};
opp-1000000000-4 {
opp-1000000000-5 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <875000>;
- opp-supported-hw = <0x30>;
+ opp-supported-hw = <0x20>;
};
};
status = "disabled";
};
+ lvts: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8186-lvts";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8186_INFRA_THERMAL_CTRL_RST>;
+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+ nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+ #thermal-sensor-cells = <1>;
+ };
+
+ svs: svs@1100bc00 {
+ compatible = "mediatek,mt8186-svs";
+ reg = <0 0x1100bc00 0 0x400>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ clock-names = "main";
+ nvmem-cells = <&svs_calibration>, <&lvts_efuse_data1>;
+ nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+ resets = <&infracfg_ao MT8186_INFRA_PTP_CTRL_RST>;
+ reset-names = "svs_rst";
+ };
+
pwm0: pwm@1100e000 {
compatible = "mediatek,mt8186-disp-pwm", "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ lvts_efuse_data1: lvts1-calib@1cc {
+ reg = <0x1cc 0x14>;
+ };
+
+ lvts_efuse_data2: lvts2-calib@2f8 {
+ reg = <0x2f8 0x14>;
+ };
+
+ svs_calibration: calib@550 {
+ reg = <0x550 0x50>;
+ };
+
gpu_speedbin: gpu-speedbin@59c {
reg = <0x59c 0x4>;
bits = <0 3>;
assigned-clocks = <&topckgen CLK_TOP_DPI>;
assigned-clock-parents = <&topckgen CLK_TOP_TVDPLL_D2>;
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_LOW 0>;
+ power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
status = "disabled";
port {
power-domains = <&spm MT8186_POWER_DOMAIN_IPE>;
};
};
+
+ thermal_zones: thermal-zones {
+ cpu-little0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts MT8186_LITTLE_CPU0>;
+
+ trips {
+ cpu_little0_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little0_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little0_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-little1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts MT8186_LITTLE_CPU1>;
+
+ trips {
+ cpu_little1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little1_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-little2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts MT8186_LITTLE_CPU2>;
+
+ trips {
+ cpu_little2_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little2_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little2_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cam-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts MT8186_CAM>;
+
+ trips {
+ cam_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cam_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cam_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nna-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts MT8186_NNA>;
+
+ trips {
+ nna_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ nna_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nna_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ adsp-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts MT8186_ADSP>;
+
+ trips {
+ adsp_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ adsp_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ adsp_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts MT8186_GPU>;
+
+ trips {
+ gpu_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpu_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-big0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&lvts MT8186_BIG_CPU0>;
+
+ trips {
+ cpu_big0_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_big0_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_big0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_big0_alert0>;
+ cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-big1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&lvts MT8186_BIG_CPU1>;
+
+ trips {
+ cpu_big1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_big1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_big1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_big1_alert0>;
+ cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
#include <dt-bindings/power/mediatek,mt8188-power.h>
+#include <dt-bindings/reset/mt8188-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
/ {
compatible = "mediatek,mt8188";
method = "smc";
};
+ thermal_zones: thermal-zones {
+ cpu-little0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU0>;
+
+ trips {
+ cpu_little0_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little0_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little0_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-little1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU1>;
+
+ trips {
+ cpu_little1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little1_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-little2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU2>;
+
+ trips {
+ cpu_little2_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little2_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little2_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-little3-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU3>;
+
+ trips {
+ cpu_little3_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little3_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little3_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little3_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-big0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU0>;
+
+ trips {
+ cpu_big0_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_big0_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_big0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_big0_alert0>;
+ cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-big1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU1>;
+
+ trips {
+ cpu_big1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_big1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_big1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_big1_alert0>;
+ cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ apu-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_APU>;
+
+ trips {
+ apu_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ apu_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ apu_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_GPU0>;
+
+ trips {
+ gpu_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpu_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_GPU1>;
+
+ trips {
+ gpu1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu1_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ adsp-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_ADSP>;
+
+ trips {
+ soc_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ soc_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ vdo-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_VDO>;
+
+ trips {
+ soc1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ soc1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ infra-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_INFRA>;
+
+ trips {
+ soc2_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc2_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ soc2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cam1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_CAM1>;
+
+ trips {
+ cam1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cam1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cam1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cam2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_CAM2>;
+
+ trips {
+ cam2_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cam2_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cam2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer: timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
compatible = "mediatek,mt8188-infracfg-ao", "syscon";
reg = <0 0x10001000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
pericfg: syscon@10003000 {
status = "disabled";
};
+ lvts_ap: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8188-lvts-ap";
+ reg = <0 0x1100b000 0 0xc00>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8188_INFRA_RST1_THERMAL_CTRL_RST>;
+ nvmem-cells = <&lvts_efuse_data1>;
+ nvmem-cell-names = "lvts-calib-data-1";
+ #thermal-sensor-cells = <1>;
+ };
+
spi1: spi@11010000 {
compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
#address-cells = <1>;
status = "disabled";
};
+ lvts_mcu: thermal-sensor@11278000 {
+ compatible = "mediatek,mt8188-lvts-mcu";
+ reg = <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8188_INFRA_RST1_THERMAL_MCU_RST>;
+ nvmem-cells = <&lvts_efuse_data1>;
+ nvmem-cell-names = "lvts-calib-data-1";
+ #thermal-sensor-cells = <1>;
+ };
+
i2c0: i2c@11280000 {
compatible = "mediatek,mt8188-i2c";
reg = <0 0x11280000 0 0x1000>,
#clock-cells = <1>;
};
+ efuse: efuse@11f20000 {
+ compatible = "mediatek,mt8188-efuse", "mediatek,efuse";
+ reg = <0 0x11f20000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ lvts_efuse_data1: lvts1-calib@1ac {
+ reg = <0x1ac 0x40>;
+ };
+ };
+
gpu: gpu@13000000 {
compatible = "mediatek,mt8188-mali", "arm,mali-valhall-jm";
reg = <0 0x13000000 0 0x4000>;
<&spm MT8188_POWER_DOMAIN_MFG3>,
<&spm MT8188_POWER_DOMAIN_MFG4>;
power-domain-names = "core0", "core1", "core2";
+ #cooling-cells = <2>;
status = "disabled";
};
pins-low-power-hdmi-disable {
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
<PINMUX_GPIO32__FUNC_GPIO32>,
- <PINMUX_GPIO33__FUNC_GPIO33>,
- <PINMUX_GPIO34__FUNC_GPIO34>,
- <PINMUX_GPIO35__FUNC_GPIO35>;
+ <PINMUX_GPIO33__FUNC_GPIO33>;
input-enable;
bias-pull-down;
};
+
+ pins-low-power-hdmi-rsel-disable {
+ pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+ <PINMUX_GPIO35__FUNC_GPIO35>;
+ input-enable;
+ bias-pull-down = <75000>;
+ };
};
&sound {
pins-low-power-hdmi-disable {
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
<PINMUX_GPIO32__FUNC_GPIO32>,
- <PINMUX_GPIO33__FUNC_GPIO33>,
- <PINMUX_GPIO34__FUNC_GPIO34>,
- <PINMUX_GPIO35__FUNC_GPIO35>;
+ <PINMUX_GPIO33__FUNC_GPIO33>;
input-enable;
bias-pull-down;
};
+ pins-low-power-hdmi-rsel-disable {
+ pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+ <PINMUX_GPIO35__FUNC_GPIO35>;
+ input-enable;
+ bias-pull-down = <75000>;
+ };
+
pins-low-power-pcie0-disable {
pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
<PINMUX_GPIO20__FUNC_GPIO20>,
pins-low-power-hdmi-disable {
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
<PINMUX_GPIO32__FUNC_GPIO32>,
- <PINMUX_GPIO33__FUNC_GPIO33>,
- <PINMUX_GPIO34__FUNC_GPIO34>,
- <PINMUX_GPIO35__FUNC_GPIO35>;
+ <PINMUX_GPIO33__FUNC_GPIO33>;
input-enable;
bias-pull-down;
};
+ pins-low-power-hdmi-rsel-disable {
+ pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+ <PINMUX_GPIO35__FUNC_GPIO35>;
+ input-enable;
+ bias-pull-down = <75000>;
+ };
+
pins-low-power-pcie0-disable {
pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
<PINMUX_GPIO20__FUNC_GPIO20>,
spi-max-frequency = <3000000>;
wakeup-source;
- keyboard-backlight {
- compatible = "google,cros-kbd-led-backlight";
- };
-
i2c_tunnel: i2c-tunnel {
compatible = "google,cros-ec-i2c-tunnel";
google,remote-bus = <0>;
&xhci1 {
status = "okay";
+ phys = <&u2port1 PHY_TYPE_USB2>;
rx-fifo-depth = <3072>;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
vbus-supply = <&usb_vbus>;
+ mediatek,u3p-dis-msk = <1>;
};
&xhci2 {
<0 0x11293e00 0 0x0100>;
reg-names = "mac", "ippc";
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
- phys = <&u2port1 PHY_TYPE_USB2>;
+ phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>,
<&topckgen CLK_TOP_SSUSB_XHCI_1P>;
assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
<CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+ mediatek,scp = <&scp>;
power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>;
clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
compatible = "mediatek,mt8195-dp-intf";
reg = <0 0x1c015000 0 0x1000>;
interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&vdosys0 CLK_VDO0_DP_INTF0>,
- <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+ clocks = <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+ <&vdosys0 CLK_VDO0_DP_INTF0>,
<&apmixedsys CLK_APMIXED_TVDPLL1>;
- clock-names = "engine", "pixel", "pll";
+ clock-names = "pixel", "engine", "pll";
status = "disabled";
};
reg = <0 0x1c113000 0 0x1000>;
interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
- clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
- <&vdosys1 CLK_VDO1_DPINTF>,
+ clocks = <&vdosys1 CLK_VDO1_DPINTF>,
+ <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
<&apmixedsys CLK_APMIXED_TVDPLL2>;
- clock-names = "engine", "pixel", "pll";
+ clock-names = "pixel", "engine", "pll";
status = "disabled";
};
* Authors:
* Fabien Parent <fparent@baylibre.com>
* Bernhard Rosenkränzer <bero@baylibre.com>
+ * Alexandre Mergnat <amergnat@baylibre.com>
*/
/dts-v1/;
reg = <0 0x43200000 0 0x00c00000>;
};
};
+
+ sound: sound {
+ compatible = "mediatek,mt8365-mt6357";
+ pinctrl-names = "default",
+ "dmic",
+ "miso_off",
+ "miso_on",
+ "mosi_off",
+ "mosi_on";
+ pinctrl-0 = <&aud_default_pins>;
+ pinctrl-1 = <&aud_dmic_pins>;
+ pinctrl-2 = <&aud_miso_off_pins>;
+ pinctrl-3 = <&aud_miso_on_pins>;
+ pinctrl-4 = <&aud_mosi_off_pins>;
+ pinctrl-5 = <&aud_mosi_on_pins>;
+ mediatek,platform = <&afe>;
+ };
+};
+
+&afe {
+ mediatek,dmic-mode = <1>;
+ status = "okay";
};
&cpu0 {
interrupts-extended = <&pio 145 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
+ mediatek,micbias0-microvolt = <1900000>;
+ mediatek,micbias1-microvolt = <1700000>;
};
&pio {
+ aud_default_pins: audiodefault-pins {
+ clk-dat-pins {
+ pinmux = <MT8365_PIN_72_CMDAT4__FUNC_I2S3_BCK>,
+ <MT8365_PIN_73_CMDAT5__FUNC_I2S3_LRCK>,
+ <MT8365_PIN_74_CMDAT6__FUNC_I2S3_MCK>,
+ <MT8365_PIN_75_CMDAT7__FUNC_I2S3_DO>;
+ };
+ };
+
+ aud_dmic_pins: audiodmic-pins {
+ clk-dat-pins {
+ pinmux = <MT8365_PIN_117_DMIC0_CLK__FUNC_DMIC0_CLK>,
+ <MT8365_PIN_118_DMIC0_DAT0__FUNC_DMIC0_DAT0>,
+ <MT8365_PIN_119_DMIC0_DAT1__FUNC_DMIC0_DAT1>;
+ };
+ };
+
+ aud_miso_off_pins: misooff-pins {
+ clk-dat-pins {
+ pinmux = <MT8365_PIN_53_AUD_CLK_MISO__FUNC_GPIO53>,
+ <MT8365_PIN_54_AUD_SYNC_MISO__FUNC_GPIO54>,
+ <MT8365_PIN_55_AUD_DAT_MISO0__FUNC_GPIO55>,
+ <MT8365_PIN_56_AUD_DAT_MISO1__FUNC_GPIO56>;
+ input-enable;
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+ };
+
+ aud_miso_on_pins: misoon-pins {
+ clk-dat-pins {
+ pinmux = <MT8365_PIN_53_AUD_CLK_MISO__FUNC_AUD_CLK_MISO>,
+ <MT8365_PIN_54_AUD_SYNC_MISO__FUNC_AUD_SYNC_MISO>,
+ <MT8365_PIN_55_AUD_DAT_MISO0__FUNC_AUD_DAT_MISO0>,
+ <MT8365_PIN_56_AUD_DAT_MISO1__FUNC_AUD_DAT_MISO1>;
+ drive-strength = <6>;
+ };
+ };
+
+ aud_mosi_off_pins: mosioff-pins {
+ clk-dat-pins {
+ pinmux = <MT8365_PIN_49_AUD_CLK_MOSI__FUNC_GPIO49>,
+ <MT8365_PIN_50_AUD_SYNC_MOSI__FUNC_GPIO50>,
+ <MT8365_PIN_51_AUD_DAT_MOSI0__FUNC_GPIO51>,
+ <MT8365_PIN_52_AUD_DAT_MOSI1__FUNC_GPIO52>;
+ input-enable;
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+ };
+
+ aud_mosi_on_pins: mosion-pins {
+ clk-dat-pins {
+ pinmux = <MT8365_PIN_49_AUD_CLK_MOSI__FUNC_AUD_CLK_MOSI>,
+ <MT8365_PIN_50_AUD_SYNC_MOSI__FUNC_AUD_SYNC_MOSI>,
+ <MT8365_PIN_51_AUD_DAT_MOSI0__FUNC_AUD_DAT_MOSI0>,
+ <MT8365_PIN_52_AUD_DAT_MOSI1__FUNC_AUD_DAT_MOSI1>;
+ drive-strength = <6>;
+ };
+ };
+
ethernet_pins: ethernet-pins {
phy_reset_pins {
pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>;
/*
* (C) 2018 MediaTek Inc.
* Copyright (C) 2022 BayLibre SAS
- * Fabien Parent <fparent@baylibre.com>
- * Bernhard Rosenkränzer <bero@baylibre.com>
+ * Authors: Fabien Parent <fparent@baylibre.com>
+ * Bernhard Rosenkränzer <bero@baylibre.com>
+ * Alexandre Mergnat <amergnat@baylibre.com>
*/
+
#include <dt-bindings/clock/mediatek,mt8365-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
reg = <0 0x19020000 0 0x1000>;
#clock-cells = <1>;
};
+
+ afe: audio-controller@11220000 {
+ compatible = "mediatek,mt8365-afe-pcm";
+ reg = <0 0x11220000 0 0x1000>;
+ #sound-dai-cells = <0>;
+ clocks = <&clk26m>,
+ <&topckgen CLK_TOP_AUDIO_SEL>,
+ <&topckgen CLK_TOP_AUD_I2S0_M>,
+ <&topckgen CLK_TOP_AUD_I2S1_M>,
+ <&topckgen CLK_TOP_AUD_I2S2_M>,
+ <&topckgen CLK_TOP_AUD_I2S3_M>,
+ <&topckgen CLK_TOP_AUD_ENGEN1_SEL>,
+ <&topckgen CLK_TOP_AUD_ENGEN2_SEL>,
+ <&topckgen CLK_TOP_AUD_1_SEL>,
+ <&topckgen CLK_TOP_AUD_2_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S0_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S1_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S2_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S3_SEL>;
+ clock-names = "top_clk26m_clk",
+ "top_audio_sel",
+ "audio_i2s0_m",
+ "audio_i2s1_m",
+ "audio_i2s2_m",
+ "audio_i2s3_m",
+ "engen1",
+ "engen2",
+ "aud1",
+ "aud2",
+ "i2s0_m_sel",
+ "i2s1_m_sel",
+ "i2s2_m_sel",
+ "i2s3_m_sel";
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_AUDIO>;
+ status = "disabled";
+ };
};
timer {
};
&xhci1 {
- phys = <&u2port1 PHY_TYPE_USB2>,
- <&u3port1 PHY_TYPE_USB3>;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
status = "okay";
};
/* USB2.0 M.2 Key-B */
&xhci1 {
+ phys = <&u2port1 PHY_TYPE_USB2>;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
mediatek,u3p-dis-msk = <0x01>;
status = "okay";
};
&xhci1 {
+ phys = <&u2port1 PHY_TYPE_USB2>;
/* MT7921's USB Bluetooth has issues with USB2 LPM */
usb2-lpm-disable;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
vbus-supply = <&vsys>;
+ mediatek,u3p-dis-msk = <1>;
status = "okay";
};
aliases {
serial0 = &uart0;
+ serial10 = &uart10;
+ serial12 = &uart12;
+ serial13 = &uart13;
+ serial14 = &uart14;
};
chosen {
};
};
-&uart0 {
- status = "okay";
-};
-
&clk {
assigned-clocks = <&clk CAPLL>,
<&clk DDRPLL>,
"integer",
"integer";
};
+
+&pinctrl {
+ uart-grp {
+ pinctrl_uart0: uart0-pins {
+ nuvoton,pins = <4 14 1>,
+ <4 15 1>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart10: uart10-pins {
+ nuvoton,pins = <7 4 2>,
+ <7 5 2>,
+ <7 6 2>,
+ <7 7 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart12: uart12-pins {
+ nuvoton,pins = <2 13 2>,
+ <2 14 2>,
+ <2 15 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart13: uart13-pins {
+ nuvoton,pins = <7 12 3>,
+ <7 13 3>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart14: uart14-pins {
+ nuvoton,pins = <7 14 2>,
+ <7 15 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart10>;
+ status = "okay";
+};
+
+&uart12 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart12>;
+ status = "okay";
+};
+
+&uart13 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart13>;
+ status = "okay";
+};
+
+&uart14 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart14>;
+ status = "okay";
+};
aliases {
serial0 = &uart0;
+ serial11 = &uart11;
+ serial12 = &uart12;
+ serial14 = &uart14;
+ serial16 = &uart16;
};
chosen {
};
};
-&uart0 {
- status = "okay";
-};
-
&clk {
assigned-clocks = <&clk CAPLL>,
<&clk DDRPLL>,
"integer",
"integer";
};
+
+&pinctrl {
+ uart-grp {
+ pinctrl_uart0: uart0-pins {
+ nuvoton,pins = <4 14 1>,
+ <4 15 1>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart11: uart11-pins {
+ nuvoton,pins = <11 0 2>,
+ <11 1 2>,
+ <11 2 2>,
+ <11 3 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart12: uart12-pins {
+ nuvoton,pins = <8 1 2>,
+ <8 2 2>,
+ <8 3 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart14: uart14-pins {
+ nuvoton,pins = <8 5 2>,
+ <8 6 2>,
+ <8 7 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart16: uart16-pins {
+ nuvoton,pins = <10 0 2>,
+ <10 1 2>,
+ <10 2 2>,
+ <10 3 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart11 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart11>;
+ status = "okay";
+};
+
+&uart12 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart12>;
+ status = "okay";
+};
+
+&uart14 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart14>;
+ status = "okay";
+};
+
+&uart16 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart16>;
+ status = "okay";
+};
ranges;
sys: system-management@40460000 {
- compatible = "nuvoton,ma35d1-reset";
+ compatible = "nuvoton,ma35d1-reset", "syscon";
reg = <0x0 0x40460000 0x0 0x200>;
#reset-cells = <1>;
};
clocks = <&clk_hxt>;
};
+ pinctrl: pinctrl@40040000 {
+ compatible = "nuvoton,ma35d1-pinctrl";
+ reg = <0x0 0x40040000 0x0 0xc00>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nuvoton,sys = <&sys>;
+ ranges = <0x0 0x0 0x40040000 0x400>;
+
+ gpioa: gpio@0 {
+ reg = <0x0 0x40>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPA_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiob: gpio@40 {
+ reg = <0x40 0x40>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPB_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpioc: gpio@80 {
+ reg = <0x80 0x40>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPC_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiod: gpio@c0 {
+ reg = <0xc0 0x40>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPD_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpioe: gpio@100 {
+ reg = <0x100 0x40>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPE_GATE>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiof: gpio@140 {
+ reg = <0x140 0x40>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPF_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiog: gpio@180 {
+ reg = <0x180 0x40>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPG_GATE>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpioh: gpio@1c0 {
+ reg = <0x1c0 0x40>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPH_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpioi: gpio@200 {
+ reg = <0x200 0x40>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPI_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpioj: gpio@240 {
+ reg = <0x240 0x40>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPJ_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiok: gpio@280 {
+ reg = <0x280 0x40>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPK_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiol: gpio@2c0 {
+ reg = <0x2c0 0x40>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPL_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiom: gpio@300 {
+ reg = <0x300 0x40>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPM_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpion: gpio@340 {
+ reg = <0x340 0x40>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPN_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
uart0: serial@40700000 {
compatible = "nuvoton,ma35d1-uart";
reg = <0x0 0x40700000 0x0 0x100>;
status = "okay";
};
+ serial@70006300 {
+ /delete-property/ reg-shift;
+ status = "okay";
+ compatible = "nvidia,tegra30-hsuart";
+ reset-names = "serial";
+
+ bluetooth {
+ compatible = "brcm,bcm43540-bt";
+ device-wakeup-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 5) IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wakeup";
+ };
+ };
+
+ i2c@7000c400 {
+ status = "okay";
+
+ power-sensor@40 {
+ compatible = "ti,ina3221";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ input@0 {
+ reg = <0x0>;
+ label = "VDD_IN";
+ shunt-resistor-micro-ohms = <20000>;
+ };
+
+ input@1 {
+ reg = <0x1>;
+ label = "VDD_GPU";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ input@2 {
+ reg = <0x2>;
+ label = "VDD_CPU";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+ };
+ };
+
i2c@7000c500 {
status = "okay";
nvidia,sys-clock-req-active-high;
};
+ mmc@700b0200 {
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+ power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+ vqmmc-supply = <&vdd_1v8>;
+ vmmc-supply = <&vdd_3v3_sys>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm4354-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 2) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+ };
+
/* eMMC */
mmc@700b0600 {
status = "okay";
status = "okay";
clock-frequency = <100000>;
+ power-sensor@42 {
+ compatible = "ti,ina3221";
+ reg = <0x42>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ input@0 {
+ reg = <0x0>;
+ label = "VDD_MUX";
+ shunt-resistor-micro-ohms = <20000>;
+ };
+
+ input@1 {
+ reg = <0x1>;
+ label = "VDD_5V_IO_SYS";
+ shunt-resistor-micro-ohms = <5000>;
+ };
+
+ input@2 {
+ reg = <0x2>;
+ label = "VDD_3V3_SYS";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+ };
+
+ power-sensor@43 {
+ compatible = "ti,ina3221";
+ reg = <0x43>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ input@0 {
+ reg = <0x0>;
+ label = "VDD_3V3_IO";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ input@1 {
+ reg = <0x1>;
+ label = "VDD_1V8_IO";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ input@2 {
+ reg = <0x2>;
+ label = "VDD_M2_IN";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+ };
+
exp1: gpio@74 {
compatible = "ti,tca9539";
reg = <0x74>;
bus-width = <4>;
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
vqmmc-supply = <&vddio_sdmmc>;
vmmc-supply = <&vdd_3v3_sd>;
regulator-name = "VDD_3V3_SD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
// SPDX-License-Identifier: GPL-2.0
-#include "tegra234.dtsi"
#include "tegra234-p3701.dtsi"
/ {
model = "NVIDIA Jetson AGX Orin";
compatible = "nvidia,p3701-0000", "nvidia,tegra234";
- bus@0 {
- i2c@3160000 {
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
-
- label = "module";
- vcc-supply = <&vdd_1v8_hs>;
- address-width = <8>;
- pagesize = <8>;
- size = <256>;
- read-only;
- };
- };
-
- spi@3270000 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <102000000>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- };
- };
-
- mmc@3400000 {
- status = "okay";
- bus-width = <4>;
- cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
- disable-wp;
- };
-
- mmc@3460000 {
- status = "okay";
- bus-width = <8>;
- non-removable;
- };
-
- padctl@3520000 {
- vclamp-usb-supply = <&vdd_1v8_ao>;
- avdd-usb-supply = <&vdd_3v3_ao>;
-
- ports {
- usb2-0 {
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb2-1 {
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb2-2 {
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb2-3 {
- vbus-supply = <&vdd_5v0_sys>;
- };
- };
- };
-
- rtc@c2a0000 {
- status = "okay";
- };
-
- pmc@c360000 {
- nvidia,invert-interrupt;
- };
- };
-
- vdd_5v0_sys: regulator-vdd-5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "VIN_SYS_5V0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_1v8_ls: regulator-vdd-1v8-ls {
- compatible = "regulator-fixed";
- regulator-name = "VDD_1V8_LS";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vdd_1v8_hs: regulator-vdd-1v8-hs {
- compatible = "regulator-fixed";
- regulator-name = "VDD_1V8_HS";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vdd_1v8_ao: regulator-vdd-1v8-ao {
- compatible = "regulator-fixed";
- regulator-name = "VDD_1V8_AO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vdd_3v3_ao: regulator-vdd-3v3-ao {
- compatible = "regulator-fixed";
- regulator-name = "VDD_3V3_AO";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_3v3_pcie: regulator-vdd-3v3-pcie {
- compatible = "regulator-fixed";
- regulator-name = "VDD_3V3_PCIE";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
- regulator-boot-on;
- enable-active-high;
- };
-
- vdd_12v_pcie: regulator-vdd-12v-pcie {
- compatible = "regulator-fixed";
- regulator-name = "VDD_12V_PCIE";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>;
- regulator-boot-on;
- };
-
thermal-zones {
tj-thermal {
polling-delay = <1000>;
// SPDX-License-Identifier: GPL-2.0
-#include "tegra234.dtsi"
#include "tegra234-p3701.dtsi"
/ {
compatible = "nvidia,p3701-0008", "nvidia,tegra234";
- bus@0 {
- i2c@3160000 {
+ thermal-zones {
+ tj-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <1000>;
status = "okay";
- eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- label = "module";
- vcc-supply = <&vdd_1v8_hs>;
- address-width = <8>;
- pagesize = <8>;
- size = <256>;
- read-only;
- };
- };
-
- spi@3270000 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <102000000>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- };
- };
-
- mmc@3460000 {
- status = "okay";
- bus-width = <8>;
- non-removable;
- };
-
- i2c@c240000 {
- status = "okay";
- };
-
- i2c@c250000 {
- power-sensor@41 {
- compatible = "ti,ina3221";
- reg = <0x41>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- input@0 {
- reg = <0x0>;
- label = "CVB_ATX_12V";
- shunt-resistor-micro-ohms = <2000>;
- };
-
- input@1 {
- reg = <0x1>;
- label = "CVB_ATX_3V3";
- shunt-resistor-micro-ohms = <2000>;
+ trips {
+ tj_trip_active0: active-0 {
+ temperature = <85000>;
+ hysteresis = <4000>;
+ type = "active";
};
- input@2 {
- reg = <0x2>;
- label = "CVB_ATX_5V";
- shunt-resistor-micro-ohms = <2000>;
+ tj_trip_active1: active-1 {
+ temperature = <105000>;
+ hysteresis = <4000>;
+ type = "active";
};
};
-
- power-sensor@44 {
- compatible = "ti,ina219";
- reg = <0x44>;
- shunt-resistor = <2000>;
- };
- };
-
- rtc@c2a0000 {
- status = "okay";
};
-
- pmc@c360000 {
- nvidia,invert-interrupt;
- };
- };
-
- bpmp {
- i2c {
- status = "okay";
-
- thermal-sensor@4c {
- status = "okay";
- reg = <0x4c>;
- vcc-supply = <&vdd_1v8_ao>;
- };
- };
-
- thermal {
- status = "okay";
- };
- };
-
- vdd_1v8_ao: regulator-vdd-1v8-ao {
- compatible = "regulator-fixed";
- regulator-name = "VDD_1V8_AO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vdd_1v8_hs: regulator-vdd-1v8-hs {
- compatible = "regulator-fixed";
- regulator-name = "VDD_1V8_HS";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vdd_1v8_ls: regulator-vdd-1v8-ls {
- compatible = "regulator-fixed";
- regulator-name = "VDD_1V8_LS";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vdd_3v3_ao: regulator-vdd-3v3-ao {
- compatible = "regulator-fixed";
- regulator-name = "vdd-AO-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_5v0_sys: regulator-vdd-5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "VIN_SYS_5V0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
};
};
// SPDX-License-Identifier: GPL-2.0
+#include "tegra234.dtsi"
+
/ {
compatible = "nvidia,p3701", "nvidia,tegra234";
};
};
+ i2c@3160000 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+
+ label = "module";
+ vcc-supply = <&vdd_1v8_hs>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
+ spi@3270000 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <102000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+ };
+
+ mmc@3460000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ padctl@3520000 {
+ vclamp-usb-supply = <&vdd_1v8_ao>;
+ avdd-usb-supply = <&vdd_3v3_ao>;
+
+ ports {
+ usb2-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-2 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+ };
+ };
+
i2c@c240000 {
status = "okay";
};
};
};
+
+ rtc@c2a0000 {
+ status = "okay";
+ };
+
+ pmc@c360000 {
+ nvidia,invert-interrupt;
+ };
+ };
+
+ bpmp {
+ i2c {
+ status = "okay";
+
+ thermal-sensor@4c {
+ compatible = "ti,tmp451";
+ status = "okay";
+ reg = <0x4c>;
+ vcc-supply = <&vdd_1v8_ao>;
+ };
+ };
+
+ thermal {
+ status = "okay";
+ };
+ };
+
+ vdd_1v8_ao: regulator-vdd-1v8-ao {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8_AO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd_1v8_hs: regulator-vdd-1v8-hs {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8_HS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd_1v8_ls: regulator-vdd-1v8-ls {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8_LS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_ao: regulator-vdd-3v3-ao {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_AO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_5v0_sys: regulator-vdd-5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "VIN_SYS_5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
};
};
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/sound/rt5640.h>
#include "tegra234-p3701-0000.dtsi"
-#include "tegra234-p3737-0000.dtsi"
/ {
model = "NVIDIA Jetson AGX Orin Developer Kit";
};
bus@0 {
+ aconnect@2900000 {
+ ahub@2900800 {
+ i2s@2901000 {
+ ports {
+ port@1 {
+ endpoint {
+ dai-format = "i2s";
+ remote-endpoint = <&rt5640_ep>;
+ };
+ };
+ };
+ };
+ };
+ };
+
serial@3100000 {
compatible = "nvidia,tegra194-hsuart";
reset-names = "serial";
status = "okay";
};
+ i2c@3160000 {
+ status = "okay";
+
+ eeprom@56 {
+ compatible = "atmel,24c02";
+ reg = <0x56>;
+
+ label = "system";
+ vcc-supply = <&vdd_1v8_sys>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
serial@31d0000 {
current-speed = <115200>;
status = "okay";
};
+ i2c@31e0000 {
+ status = "okay";
+
+ audio-codec@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+ clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
+ clock-names = "mclk";
+ realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
+ realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
+ realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
+ sound-name-prefix = "CVB-RT";
+
+ port {
+ rt5640_ep: endpoint {
+ remote-endpoint = <&i2s1_dap>;
+ mclk-fs = <256>;
+ };
+ };
+ };
+ };
+
+ pwm@3280000 {
+ status = "okay";
+ };
+
pwm@32a0000 {
assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
status = "okay";
};
+ pwm@32c0000 {
+ status = "okay";
+ };
+
+ pwm@32f0000 {
+ status = "okay";
+ };
+
+ mmc@3400000 {
+ status = "okay";
+ bus-width = <4>;
+ cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+ disable-wp;
+ };
+
hda@3510000 {
nvidia,model = "NVIDIA Jetson AGX Orin HDA";
status = "okay";
};
};
- pwm-fan {
+ fan: pwm-fan {
+ compatible = "pwm-fan";
cooling-levels = <66 215 255>;
+ pwms = <&pwm3 0 45334>;
+ #cooling-cells = <2>;
};
serial {
};
};
};
+
+ vdd_1v8_sys: regulator-vdd-1v8-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8_SYS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_PCIE";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ enable-active-high;
+ };
+
+ vdd_12v_pcie: regulator-vdd-12v-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_12V_PCIE";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+ regulator-boot-on;
+ };
};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/sound/rt5640.h>
-
-/ {
- compatible = "nvidia,p3737-0000";
-
- bus@0 {
- aconnect@2900000 {
- ahub@2900800 {
- i2s@2901000 {
- ports {
- port@1 {
- endpoint {
- dai-format = "i2s";
- remote-endpoint = <&rt5640_ep>;
- };
- };
- };
- };
- };
- };
-
- i2c@3160000 {
- status = "okay";
-
- eeprom@56 {
- compatible = "atmel,24c02";
- reg = <0x56>;
-
- label = "system";
- vcc-supply = <&vdd_1v8_sys>;
- address-width = <8>;
- pagesize = <8>;
- size = <256>;
- read-only;
- };
- };
-
- i2c@31e0000 {
- status = "okay";
-
- audio-codec@1c {
- compatible = "realtek,rt5640";
- reg = <0x1c>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
- clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
- clock-names = "mclk";
- realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
- realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
- realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
- sound-name-prefix = "CVB-RT";
-
- port {
- rt5640_ep: endpoint {
- remote-endpoint = <&i2s1_dap>;
- mclk-fs = <256>;
- };
- };
- };
- };
-
- pwm@3280000 {
- status = "okay";
- };
-
- pwm@32c0000 {
- status = "okay";
- };
-
- pwm@32f0000 {
- status = "okay";
- };
- };
-
- fan: pwm-fan {
- compatible = "pwm-fan";
- pwms = <&pwm3 0 45334>;
- #cooling-cells = <2>;
- };
-
- vdd_1v8_sys: regulator-vdd-1v8-sys {
- compatible = "regulator-fixed";
- regulator-name = "VDD_1V8_SYS";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-};
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/sound/rt5640.h>
#include "tegra234-p3701-0008.dtsi"
-#include "tegra234-p3740-0002.dtsi"
/ {
model = "NVIDIA IGX Orin Development Kit";
};
bus@0 {
+ aconnect@2900000 {
+ ahub@2900800 {
+ i2s@2901300 {
+ ports {
+ port@1 {
+ endpoint {
+ dai-format = "i2s";
+ remote-endpoint = <&rt5640_ep>;
+ };
+ };
+ };
+ };
+
+ i2s@2901500 {
+ ports {
+ port@1 {
+ endpoint {
+ bitclock-master;
+ frame-master;
+ };
+ };
+ };
+ };
+ };
+ };
+
serial@3100000 {
compatible = "nvidia,tegra194-hsuart";
reset-names = "serial";
i2c@31c0000 {
status = "okay";
+ rt5640: audio-codec@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA234_MAIN_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+ clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
+ clock-names = "mclk";
+
+ realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
+ realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
+ realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
+
+ sound-name-prefix = "CVB-RT";
+
+ port {
+ rt5640_ep: endpoint {
+ remote-endpoint = <&i2s4_dap>;
+ mclk-fs = <256>;
+ };
+ };
+ };
+
+ /* carrier board ID EEPROM */
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+
+ label = "system";
+ vcc-supply = <&vdd_1v8_ls>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
};
i2c@31e0000 {
status = "okay";
};
+ padctl@3520000 {
+ status = "okay";
+
+ pads {
+ usb2 {
+ lanes {
+ usb2-0 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-1 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-2 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-3 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ lanes {
+ usb3-0 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb3-1 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb3-2 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-0 {
+ mode = "otg";
+ usb-role-switch;
+ status = "okay";
+ };
+
+ usb2-1 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb2-2 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb2-3 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <2>;
+ status = "okay";
+ };
+
+ usb3-1 {
+ nvidia,usb2-companion = <0>;
+ status = "okay";
+ };
+
+ usb3-2 {
+ nvidia,usb2-companion = <1>;
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3550000 {
+ status = "okay";
+
+ phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+ phy-names = "usb2-0", "usb3-0";
+ };
+
+ usb@3610000 {
+ status = "okay";
+
+ phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+ <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+ <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
+ "usb3-0", "usb3-1", "usb3-2";
+ };
+
fuse@3810000 {
status = "okay";
};
i2c@c250000 {
status = "okay";
+
+ power-sensor@41 {
+ compatible = "ti,ina3221";
+ reg = <0x41>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ input@0 {
+ reg = <0x0>;
+ label = "CVB_ATX_12V";
+ shunt-resistor-micro-ohms = <2000>;
+ };
+
+ input@1 {
+ reg = <0x1>;
+ label = "CVB_ATX_3V3";
+ shunt-resistor-micro-ohms = <2000>;
+ };
+
+ input@2 {
+ reg = <0x2>;
+ label = "CVB_ATX_5V";
+ shunt-resistor-micro-ohms = <2000>;
+ };
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina219";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
};
host1x@13e00000 {
"CVB-RT DMIC1", "CVB-RT MIC",
"CVB-RT DMIC2", "CVB-RT MIC";
};
+
+ vdd_3v3_dp: regulator-vdd-3v3-dp {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_DP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3_sys>;
+ gpio = <&gpio TEGRA234_MAIN_GPIO(H, 6) 0>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ vdd_3v3_sys: regulator-vdd-3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_3v3_wifi: regulator-vdd-3v3-wifi {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_WIFI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA234_MAIN_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ enable-active-high;
+ };
};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/sound/rt5640.h>
-
-/ {
- compatible = "nvidia,p3740-0002";
-
- bus@0 {
- aconnect@2900000 {
- ahub@2900800 {
- i2s@2901300 {
- ports {
- port@1 {
- endpoint {
- dai-format = "i2s";
- remote-endpoint = <&rt5640_ep>;
- };
- };
- };
- };
-
- i2s@2901500 {
- ports {
- port@1 {
- endpoint {
- bitclock-master;
- frame-master;
- };
- };
- };
- };
- };
- };
-
- i2c@31c0000 {
- rt5640: audio-codec@1c {
- compatible = "realtek,rt5640";
- reg = <0x1c>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA234_MAIN_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
- clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
- clock-names = "mclk";
-
- realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
- realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
- realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
-
- sound-name-prefix = "CVB-RT";
-
- port {
- rt5640_ep: endpoint {
- remote-endpoint = <&i2s4_dap>;
- mclk-fs = <256>;
- };
- };
- };
-
- /* carrier board ID EEPROM */
- eeprom@55 {
- compatible = "atmel,24c02";
- reg = <0x55>;
-
- label = "system";
- vcc-supply = <&vdd_1v8_ls>;
- address-width = <8>;
- pagesize = <8>;
- size = <256>;
- read-only;
- };
- };
-
- padctl@3520000 {
- vclamp-usb-supply = <&vdd_1v8_ao>;
- avdd-usb-supply = <&vdd_3v3_ao>;
- status = "okay";
-
- pads {
- usb2 {
- lanes {
- usb2-0 {
- nvidia,function = "xusb";
- status = "okay";
- };
-
- usb2-1 {
- nvidia,function = "xusb";
- status = "okay";
- };
-
- usb2-2 {
- nvidia,function = "xusb";
- status = "okay";
- };
-
- usb2-3 {
- nvidia,function = "xusb";
- status = "okay";
- };
- };
- };
-
- usb3 {
- lanes {
- usb3-0 {
- nvidia,function = "xusb";
- status = "okay";
- };
-
- usb3-1 {
- nvidia,function = "xusb";
- status = "okay";
- };
-
- usb3-2 {
- nvidia,function = "xusb";
- status = "okay";
- };
- };
- };
- };
-
- ports {
- usb2-0 {
- mode = "otg";
- usb-role-switch;
- status = "okay";
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb2-1 {
- mode = "host";
- status = "okay";
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb2-2 {
- mode = "host";
- status = "okay";
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb2-3 {
- mode = "host";
- status = "okay";
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb3-0 {
- nvidia,usb2-companion = <2>;
- status = "okay";
- };
-
- usb3-1 {
- nvidia,usb2-companion = <0>;
- status = "okay";
- };
-
- usb3-2 {
- nvidia,usb2-companion = <1>;
- status = "okay";
- };
- };
- };
-
- usb@3550000 {
- status = "okay";
-
- phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
- <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
- phy-names = "usb2-0", "usb3-0";
- };
-
- usb@3610000 {
- status = "okay";
-
- phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
- <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
- <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
- <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
- <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
- <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
- <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
- phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
- "usb3-0", "usb3-1", "usb3-2";
- };
- };
-
- vdd_3v3_dp: regulator-vdd-3v3-dp {
- compatible = "regulator-fixed";
- regulator-name = "VDD_3V3_DP";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_3v3_sys>;
- gpio = <&gpio TEGRA234_MAIN_GPIO(H, 6) 0>;
- enable-active-high;
- regulator-always-on;
- };
-
- vdd_3v3_sys: regulator-vdd-3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "VDD_3V3_SYS";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vdd_3v3_wifi: regulator-vdd-3v3-wifi {
- compatible = "regulator-fixed";
- regulator-name = "VDD_3V3_WIFI";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio TEGRA234_MAIN_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
- regulator-boot-on;
- enable-active-high;
- };
-};
compatible = "nvidia,p3768-0000+p3767-0000", "nvidia,p3767-0000", "nvidia,tegra234";
model = "NVIDIA Jetson Orin NX Engineering Reference Developer Kit";
- aliases {
- serial1 = &uarta;
- serial2 = &uarte;
- };
-
bus@0 {
- serial@3100000 {
- compatible = "nvidia,tegra194-hsuart";
- reset-names = "serial";
- status = "okay";
- };
-
- serial@3140000 {
- compatible = "nvidia,tegra194-hsuart";
- reset-names = "serial";
- status = "okay";
- };
-
hda@3510000 {
nvidia,model = "NVIDIA Jetson Orin NX HDA";
};
aliases {
serial0 = &tcu;
+ serial1 = &uarta;
+ serial2 = &uarte;
};
chosen {
};
bus@0 {
+ serial@3100000 {
+ compatible = "nvidia,tegra194-hsuart";
+ reset-names = "serial";
+ status = "okay";
+ };
+
+ serial@3140000 {
+ compatible = "nvidia,tegra194-hsuart";
+ reset-names = "serial";
+ status = "okay";
+ };
+
i2c@3160000 {
status = "okay";
phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
};
+ pcie-ep@14160000 {/* C4 - End Point */
+ phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+ <&p2u_hsio_7>;
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+ reset-gpios = <&gpio
+ TEGRA234_MAIN_GPIO(L, 1)
+ GPIO_ACTIVE_LOW>;
+ nvidia,refclk-select-gpios = <&gpio_aon
+ TEGRA234_AON_GPIO(AA, 4)
+ GPIO_ACTIVE_HIGH>;
+ };
+
/* C7 - M.2 Key-M */
pcie@141e0000 {
status = "okay";
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA234_CLK_UARTA>;
resets = <&bpmp TEGRA234_RESET_UARTA>;
+ dmas = <&gpcdma 8>, <&gpcdma 8>;
+ dma-names = "rx", "tx";
status = "disabled";
};
status = "disabled";
};
+ pcie-ep@14160000 {
+ compatible = "nvidia,tegra234-pcie-ep";
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+ reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */
+ 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
+ 0x00 0x36080000 0x0 0x00040000 /* DBI space (256K) */
+ 0x21 0x40000000 0x3 0x00000000>; /* Address Space (12G) */
+ reg-names = "appl", "atu_dma", "dbi", "addr_space";
+ num-lanes = <4>;
+ clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+ clock-names = "core";
+ resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+ <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "intr";
+ nvidia,bpmp = <&bpmp 4>;
+ nvidia,enable-ext-refclk;
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE4R &emc>,
+ <&mc TEGRA234_MEMORY_CLIENT_PCIE4W &emc>;
+ interconnect-names = "dma-mem", "write";
+ iommus = <&smmu_niso0 TEGRA234_SID_PCIE4>;
+ dma-coherent;
+ status = "disabled";
+ };
+
pcie@14180000 {
compatible = "nvidia,tegra234-pcie";
power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BA>;
#include <dt-bindings/clock/qcom,apss-ipq.h>
#include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq5332.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
reg = <0x01800000 0x80000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #interconnect-cells = <1>;
clocks = <&xo_board>,
<&sleep_clk>,
<0>,
"dm_hs_phy_irq";
clocks = <&gcc GCC_USB0_MASTER_CLK>,
- <&gcc GCC_SNOC_USB_CLK>,
<&gcc GCC_USB0_SLEEP_CLK>,
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "core",
- "iface",
"sleep",
"mock_utmi";
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ interconnects = <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>,
+ <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>;
+ interconnect-names = "usb-ddr", "apps-usb";
status = "disabled";
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-ipq6018";
+ compatible = "qcom,rpm-ipq6018", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
regulators {
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-ipq9574";
+ compatible = "qcom,rpm-ipq9574", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
};
};
};
};
};
+
+ flash-led-controller@53 {
+ compatible = "silergy,sy7802";
+ reg = <0x53>;
+
+ enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&camera_rear_flash_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <0>, <1>;
+ };
+ };
};
&blsp_i2c3 {
bias-disable;
};
+ camera_rear_flash_default: camera-rear-flash-default-state {
+ pins = "gpio9", "gpio16", "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
gpio_keys_default: gpio-keys-default-state {
pins = "gpio107";
function = "gpio";
pinctrl-0 = <&tsp_int_default>;
pinctrl-names = "default";
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
};
};
constant-charge-voltage-max-microvolt = <4400000>;
};
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen@50 {
+ compatible = "imagis,ist3038";
+ reg = <0x50>;
+
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+
+ vdd-supply = <®_vdd_tsp_a>;
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&ts_int_default>;
+ pinctrl-names = "default";
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+ };
+};
+
®_motor_vdd {
gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>;
};
®_touch_key {
- status = "disabled";
+ status = "disabled"; /* Using Imagis touch key */
};
&sound {
touchscreen-size-x = <768>;
touchscreen-size-y = <1024>;
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
vcca-supply = <®_vdd_tsp>;
vdd-supply = <&pm8916_l6>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-samsung-j5-common.dtsi"
+
+/ {
+ reserved-memory {
+ /delete-node/ tz-apps@85500000;
+
+ /* Additional memory used by Samsung firmware modifications */
+ tz-apps@85800000 {
+ reg = <0x0 0x85800000 0x0 0x800000>;
+ no-map;
+ };
+ };
+
+ reg_vdd_tsp_a: regulator-vdd-tsp-a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_tsp_a";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ gpio = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&tsp_ldo_en_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&accelerometer {
+ vdd-supply = <&pm8916_l5>;
+ vddio-supply = <&pm8916_l5>;
+
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "-1";
+};
+
+&gpio_hall_sensor {
+ status = "disabled";
+};
+
+&i2c_muic {
+ /* GPIO pins vary depending on model variant */
+};
+
+&i2c_sensors {
+ /* GPIO pins vary depending on model variant */
+};
+
+&touchscreen {
+ vdd-supply = <®_vdd_tsp_a>;
+};
+
+&tlmm {
+ tsp_ldo_en_default: tsp-ldo-en-default-state {
+ pins = "gpio16";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-j3-common.dtsi"
+
+/ {
+ model = "Samsung Galaxy J3 (2016) (SM-J320YZ)";
+ compatible = "samsung,j3ltetw", "qcom,msm8916";
+ chassis-type = "handset";
+};
+
+&i2c_muic {
+ sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+};
+
+&i2c_sensors {
+ /* I2C2 */
+ sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+};
+
+&muic_i2c_default {
+ pins = "gpio0", "gpio1";
+};
+
+&sensors_i2c_default {
+ /* I2C2 */
+ pins = "gpio6", "gpio7";
+};
constant-charge-voltage-max-microvolt = <4400000>;
};
+&blsp_i2c5 {
+ touchscreen@50 {
+ compatible = "imagis,ist3038";
+ reg = <0x50>;
+
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+
+ vdd-supply = <®_vdd_tsp_a>;
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&tsp_int_default>;
+ pinctrl-names = "default";
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+ };
+};
+
&mpss_mem {
/* Firmware for rossa needs more space */
reg = <0x0 0x86800000 0x0 0x5800000>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-wingtech-wt865x8.dtsi"
+
+/ {
+ model = "Lenovo A6000 (Wingtech WT86518)";
+ compatible = "wingtech,wt86518", "qcom,msm8916";
+ chassis-type = "handset";
+
+ speaker_amp: audio-amplifier {
+ compatible = "awinic,aw8738";
+
+ pinctrl-0 = <&spk_ext_pa_default>;
+ pinctrl-names = "default";
+
+ mode-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+ sound-name-prefix = "Speaker Amp";
+ awinic,mode = <1>;
+ };
+};
+
+&blsp_i2c2 {
+ accelerometer@e {
+ compatible = "kionix,kxcj91008";
+ reg = <0xe>;
+
+ vdd-supply = <&pm8916_l6>;
+ vddio-supply = <&pm8916_l6>;
+
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+ };
+};
+
+&headphones_switch {
+ VCC-supply = <&pm8916_l17>;
+};
+
+&pm8916_bms {
+ power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+ qcom,fast-charge-safe-current = <900000>;
+ qcom,fast-charge-safe-voltage = <4300000>;
+
+ monitored-battery = <&battery>;
+
+ status = "okay";
+};
+
+&sound {
+ model = "wt88047";
+ widgets = "Speaker", "Speaker",
+ "Headphone", "Headphones";
+ pin-switches = "Speaker", "Headphones";
+ audio-routing = "Speaker", "Speaker Amp OUT",
+ "Speaker Amp IN", "HPH_R",
+ "Headphones", "Headphones Switch OUTL",
+ "Headphones", "Headphones Switch OUTR",
+ "Headphones Switch INL", "HPH_L",
+ "Headphones Switch INR", "HPH_R",
+ "AMIC1", "MIC BIAS Internal1",
+ "AMIC2", "MIC BIAS Internal2";
+ aux-devs = <&speaker_amp>, <&headphones_switch>;
+};
+
+&usb {
+ dr_mode = "peripheral";
+ extcon = <&pm8916_charger>;
+};
+
+&usb_hs_phy {
+ extcon = <&pm8916_charger>;
+};
+
+&tlmm {
+ spk_ext_pa_default: spk-ext-pa-default-state {
+ pins = "gpio119";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-wingtech-wt865x8.dtsi"
+
+/ {
+ model = "Lenovo A6010 (Wingtech WT86528)";
+ compatible = "wingtech,wt86528", "qcom,msm8916";
+ chassis-type = "handset";
+
+ /* left AW8736 */
+ speaker_amp_left: audio-amplifier-left {
+ compatible = "awinic,aw8738";
+
+ pinctrl-0 = <&spk_ext_pa_left_default>;
+ pinctrl-names = "default";
+
+ mode-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+ sound-name-prefix = "Speaker Amp L";
+ awinic,mode = <3>;
+ };
+
+ /* right AW8736 */
+ speaker_amp_right: audio-amplifier-right {
+ compatible = "awinic,aw8738";
+
+ pinctrl-0 = <&spk_ext_pa_right_default>;
+ pinctrl-names = "default";
+
+ mode-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+ sound-name-prefix = "Speaker Amp R";
+ awinic,mode = <3>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 16 GPIO_ACTIVE_LOW>;
+ label = "red";
+ default-state = "off";
+ retain-state-suspended;
+ };
+
+ led-1 {
+ gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+ label = "green";
+ default-state = "off";
+ retain-state-suspended;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb_id_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_i2c2 {
+ magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+ };
+
+ imu@68 {
+ compatible = "invensense,mpu6880";
+ reg = <0x68>;
+
+ interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&imu_default>;
+ pinctrl-names = "default";
+
+ mount-matrix = "1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "1";
+ };
+};
+
+&pm8916_codec {
+ qcom,micbias1-ext-cap;
+};
+
+&sound {
+ model = "wt86528";
+ widgets = "Speaker", "Speaker",
+ "Headphone", "Headphones";
+ pin-switches = "Speaker", "Headphones";
+ audio-routing = "Speaker", "Speaker Amp L OUT",
+ "Speaker", "Speaker Amp R OUT",
+ "Speaker Amp L IN", "HPH_L",
+ "Speaker Amp R IN", "HPH_R",
+ "Headphones", "Headphones Switch OUTL",
+ "Headphones", "Headphones Switch OUTR",
+ "Headphones Switch INL", "HPH_L",
+ "Headphones Switch INR", "HPH_R",
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+ aux-devs = <&speaker_amp_left>, <&speaker_amp_right>, <&headphones_switch>;
+};
+
+&usb {
+ extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&tlmm {
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio16", "gpio17";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ imu_default: imu-default-state {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spk_ext_pa_left_default: spk-ext-pa-left-default-state {
+ pins = "gpio119";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spk_ext_pa_right_default: spk-ext-pa-right-default-state {
+ pins = "gpio121";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb_id_default: usb-id-default-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/ {
+ aliases {
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ headphones_switch: audio-switch {
+ compatible = "simple-audio-amplifier";
+
+ pinctrl-0 = <&headphones_switch_default>;
+ pinctrl-names = "default";
+
+ enable-gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
+ sound-name-prefix = "Headphones Switch";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pm8916_pwm 0 100000>;
+
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <255>;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3400000>;
+ voltage-max-design-microvolt = <4350000>;
+ energy-full-design-microwatt-hours = <8740000>;
+ charge-full-design-microamp-hours = <2300000>;
+
+ ocv-capacity-celsius = <25>;
+ ocv-capacity-table-0 = <4328000 100>, <4266000 95>, <4208000 90>,
+ <4154000 85>, <4102000 80>, <4062000 75>, <3992000 70>,
+ <3960000 65>, <3914000 60>, <3870000 55>, <3840000 50>,
+ <3818000 45>, <3800000 40>, <3784000 35>, <3770000 30>,
+ <3756000 25>, <3736000 20>, <3714000 16>, <3696000 13>,
+ <3690000 11>, <3689000 10>, <3688000 9>, <3686000 8>,
+ <3682000 7>, <3670000 6>, <3639000 5>, <3592000 4>,
+ <3530000 3>, <3448000 2>, <3320000 1>, <3000000 0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ volume-up-button {
+ label = "Volume Up";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5306";
+ reg = <0x38>;
+
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+ vcc-supply = <&pm8916_l17>;
+ iovcc-supply = <&pm8916_l6>;
+
+ reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_uart2 {
+ status = "okay";
+};
+
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_bms {
+ monitored-battery = <&battery>;
+ status = "okay";
+};
+
+&pm8916_codec {
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+ qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+ qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_pwm {
+ pinctrl-0 = <&pwm_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pm8916_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8916_rpm_regulators {
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default>;
+ pinctrl-1 = <&sdc2_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ non-removable;
+
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&venus {
+ status = "okay";
+};
+
+&venus_mem {
+ status = "okay";
+};
+
+&wcnss {
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&tlmm {
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio107";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ headphones_switch_default: headphones-switch-default-state {
+ pins = "gpio120";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen_default: touchscreen-default-state {
+ touchscreen-pins {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ reset-pins {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
+
+&pm8916_mpps {
+ pwm_out: mpp4-state {
+ pins = "mpp4";
+ function = "digital";
+ power-source = <PM8916_MPP_VPH>;
+ output-low;
+ qcom,dtest = <1>;
+ };
+};
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8916";
+ compatible = "qcom,rpm-msm8916", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * msm8929-pm8916.dtsi describes common properties (e.g. regulator connections)
+ * that apply to most devices that make use of the MSM8929 SoC and PM8916 PMIC.
+ * Many regulators have a fixed purpose in the original reference design and
+ * were rarely re-used for different purposes. Devices that deviate from the
+ * typical reference design should not make use of this include and instead add
+ * the necessary properties in the board-specific device tree.
+ */
+
+#include "msm8929.dtsi"
+#include "pm8916.dtsi"
+
+&mdss_dsi0 {
+ vdda-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi0_phy {
+ vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi1 {
+ vdda-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi1_phy {
+ vddio-supply = <&pm8916_l6>;
+};
+
+&mpss {
+ pll-supply = <&pm8916_l7>;
+};
+
+&pm8916_codec {
+ vdd-cdc-io-supply = <&pm8916_l5>;
+ vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+ vdd-micbias-supply = <&pm8916_l13>;
+};
+
+&rpm_requests {
+ pm8916_rpm_regulators: regulators {
+ compatible = "qcom,rpm-pm8916-regulators";
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ /* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */
+ /* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */
+ pm8916_s3: s3 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on; /* Needed for L2 */
+ };
+ pm8916_s4: s4 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-always-on; /* Needed for L5/L7 */
+ };
+
+ /*
+ * Some of the regulators are unused or managed by another
+ * processor (e.g. the modem). We should still define nodes for
+ * them to ensure the vote from the application processor can be
+ * dropped in case the regulators are already on during boot.
+ *
+ * The labels for these nodes are omitted on purpose because
+ * boards should configure a proper voltage before using them.
+ */
+ l1 {};
+
+ pm8916_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on; /* Needed for LPDDR RAM */
+ };
+
+ /* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */
+
+ l4 {};
+
+ pm8916_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on; /* Needed for most digital I/O */
+ };
+
+ pm8916_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8916_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on; /* Needed for CPU PLL */
+ };
+
+ pm8916_l8: l8 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8916_l9: l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l10 {};
+
+ pm8916_l11: l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ pm8916_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8916_l13: l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ l14 {};
+ l15 {};
+ l16 {};
+ l17 {};
+ l18 {};
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8916_l8>;
+ vqmmc-supply = <&pm8916_l5>;
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8916_l11>;
+ vqmmc-supply = <&pm8916_l12>;
+};
+
+&usb_hs_phy {
+ v1p8-supply = <&pm8916_l7>;
+ v3p3-supply = <&pm8916_l13>;
+};
+
+&wcnss {
+ vddpx-supply = <&pm8916_l7>;
+};
+
+&wcnss_iris {
+ vddxo-supply = <&pm8916_l7>;
+ vddrfa-supply = <&pm8916_s3>;
+ vddpa-supply = <&pm8916_l9>;
+ vdddig-supply = <&pm8916_l5>;
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8929-pm8916.dtsi"
+#include "msm8939-wingtech-wt82918.dtsi"
+
+/ {
+ model = "Lenovo Vibe K5 (HD) (Wingtech WT82918)";
+ compatible = "wingtech,wt82918hd", "qcom,msm8929";
+ chassis-type = "handset";
+};
+
+&touchscreen {
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8939.dtsi"
+
+&opp_table {
+ /delete-node/ opp-550000000;
+};
};
};
};
+
+ flash-led-controller@53 {
+ compatible = "silergy,sy7802";
+ reg = <0x53>;
+
+ enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&camera_rear_flash_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <0>, <1>;
+ };
+ };
};
&blsp_i2c3 {
bias-disable;
};
+ camera_rear_flash_default: camera-rear-flash-default-state {
+ pins = "gpio9", "gpio16", "gpio51";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
pins = "gpio20";
function = "gpio";
};
};
- pwm_vibrator: pwm-vibrator {
+ pwm_vibrator: pwm {
compatible = "clk-pwm";
#pwm-cells = <2>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include "msm8939-wingtech-wt82918.dtsi"
+
+/ {
+ model = "Lenovo Vibe K5 (Wingtech WT82918)";
+ compatible = "wingtech,wt82918", "qcom,msm8939";
+ chassis-type = "handset";
+};
+
+&touchscreen {
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/ {
+ aliases {
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pm8916_pwm 0 100000>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <128>;
+ };
+
+ flash-led-controller {
+ compatible = "sgmicro,sgm3140";
+ enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&camera_front_flash_default>;
+ pinctrl-names = "default";
+
+ flash_led: led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ button-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_CHARGING;
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ retain-state-suspended;
+ };
+
+ led-1 {
+ gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ retain-state-suspended;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb_id_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ accelerometer@68 {
+ compatible = "invensense,icm20608";
+ reg = <0x68>;
+
+ interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&accelerometer_default>;
+ pinctrl-names = "default";
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen: touchscreen@38 {
+ compatible = "edt,edt-ft5306";
+ reg = <0x38>;
+
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+
+ vcc-supply = <&pm8916_l17>;
+ iovcc-supply = <&pm8916_l6>;
+
+ reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&blsp_uart2 {
+ status = "okay";
+};
+
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_pwm {
+ pinctrl-0 = <&pwm_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pm8916_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8916_rpm_regulators {
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default>;
+ pinctrl-1 = <&sdc2_sleep>;
+ pinctrl-names = "default", "sleep";
+ non-removable;
+ status = "okay";
+};
+
+&usb {
+ extcon = <&usb_id>, <&usb_id>;
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&wcnss {
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&tlmm {
+ accelerometer_default: accelerometer-default-state {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ camera_front_flash_default: camera-front-flash-default-state {
+ pins = "gpio31", "gpio32";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio107";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio36", "gpio69";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen_default: touchscreen-default-state {
+ reset-pins {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen-pins {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ usb_id_default: usb-id-default-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
+
+&pm8916_mpps {
+ pwm_out: mpp4-state {
+ pins = "mpp4";
+ function = "digital";
+ power-source = <PM8916_MPP_VPH>;
+ output-low;
+ qcom,dtest = <1>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include "msm8939-wingtech-wt82918.dtsi"
+
+/ {
+ model = "Lenovo Vibe K5 (HD) (Wingtech WT82918)";
+ compatible = "wingtech,wt82918hdhw39", "qcom,msm8939";
+ chassis-type = "handset";
+};
+
+&touchscreen {
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+};
smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- mboxes = <&apcs1_mbox 0>;
+ qcom,ipc = <&apcs1_mbox 8 0>;
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8936";
+ compatible = "qcom,rpm-msm8936", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8953";
+ compatible = "qcom,rpm-msm8953", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8976";
+ compatible = "qcom,rpm-msm8976", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
#thermal-sensor-cells = <1>;
};
+ restart@4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0x004ab000 0x4>;
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,msm8976-pinctrl";
reg = <0x01000000 0x300000>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * MSM8992 LG G4 (h815) device tree.
+ *
+ * Copyright (c) 2024, Alexander Reimelt <alexander.reimelt@posteo.de>
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/* different mapping */
+/delete-node/ &cont_splash_mem;
+
+/* disabled downstream */
+/delete-node/ &dfps_data_mem;
+
+/ {
+ model = "LG G4 (H815)";
+ compatible = "lg,h815", "qcom,msm8992";
+ chassis-type = "handset";
+
+ qcom,msm-id = <0xfb 0x0>;
+ qcom,pmic-id = <0x10009 0x1000a 0x0 0x0>;
+ qcom,board-id = <0xb64 0x0>;
+
+ /* psci is broken */
+ /delete-node/ psci;
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ spin-table@6000000 {
+ reg = <0x0 0x06000000 0x0 0x00001000>;
+ no-map;
+ };
+
+ ramoops@ff00000 {
+ compatible = "ramoops";
+ reg = <0x0 0x0ff00000 0x0 0x00100000>;
+ console-size = <0x20000>;
+ pmsg-size = <0x20000>;
+ record-size = <0x10000>;
+ ecc-size = <0x10>;
+ };
+
+ cont_splash_mem: fb@3400000 {
+ reg = <0x0 0x03400000 0x0 0x00c00000>;
+ no-map;
+ };
+
+ crash_fb_mem: crash-fb@4000000 {
+ reg = <0x0 0x04000000 0x0 0x00c00000>;
+ no-map;
+ };
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_sensor_default>;
+ pinctrl-names = "default";
+
+ label = "Hall Effect Sensor";
+
+ event-hall-sensor {
+ gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+ label = "hall effect sensor";
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-vol-up {
+ label = "volume up";
+ gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+};
+
+&CPU0 {
+ enable-method = "spin-table";
+};
+
+&CPU1 {
+ enable-method = "spin-table";
+};
+
+&CPU2 {
+ enable-method = "spin-table";
+};
+
+&CPU3 {
+ enable-method = "spin-table";
+};
+
+&CPU4 {
+ enable-method = "spin-table";
+};
+
+&CPU5 {
+ enable-method = "spin-table";
+};
+
+&pm8994_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_l1-supply = <&pmi8994_s1>;
+ vdd_l2_26_28-supply = <&pm8994_s3>;
+ vdd_l3_11-supply = <&pm8994_s3>;
+ vdd_l4_27_31-supply = <&pm8994_s3>;
+ vdd_l5_7-supply = <&pm8994_s5>;
+ vdd_l6_12_32-supply = <&pm8994_s5>;
+ vdd_l8_16_30-supply = <&vph_pwr>;
+ vdd_l9_10_18_22-supply = <&pmi8994_bby>;
+ vdd_l13_19_23_24-supply = <&pmi8994_bby>;
+ vdd_l14_15-supply = <&pm8994_s5>;
+ vdd_l17_29-supply = <&pmi8994_bby>;
+ vdd_l20_21-supply = <&pmi8994_bby>;
+ vdd_l25-supply = <&pm8994_s5>;
+ vdd_lvs1_2-supply = <&pm8994_s4>;
+
+ pm8994_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ /* sdhc1 vqmmc and bcm */
+ pm8994_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-system-load = <325000>;
+ regulator-allow-set-load;
+ };
+
+ pm8994_s5: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ /* sdhc2 vqmmc */
+ pm8994_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <22000>;
+ regulator-allow-set-load;
+ };
+
+ /* sdhc1 vmmc */
+ pm8994_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <570000>;
+ regulator-allow-set-load;
+ };
+
+ /* sdhc2 vmmc */
+ pm8994_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <800000>;
+ regulator-allow-set-load;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,rpm-pmi8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ pmi8994_s1: s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ /* S2 & S3 - VDD_GFX */
+
+ pmi8994_bby: boost-bypass {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
+};
+
+&sdhc1 {
+ mmc-hs400-1_8v;
+ vmmc-supply = <&pm8994_l20>;
+ vqmmc-supply = <&pm8994_s4>;
+ non-removable;
+ status = "okay";
+};
+
+&sdhc2 {
+ vmmc-supply = <&pm8994_l21>;
+ vqmmc-supply = <&pm8994_l13>;
+ cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&tlmm {
+ hall_sensor_default: hall-sensor-default-state {
+ pins = "gpio75";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
qcom,remote-pid = <6>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8994";
+ compatible = "qcom,rpm-msm8994", "qcom,smd-rpm";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8996";
+ compatible = "qcom,rpm-msm8996", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8998";
+ compatible = "qcom,rpm-msm8998", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
"gpll0";
};
+ lpass_q6_smmu: iommu@5100000 {
+ compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+ reg = <0x05100000 0x40000>;
+ clocks = <&gcc HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+ clock-names = "bus";
+
+ #global-interrupts = <0>;
+ #iommu-cells = <1>;
+ interrupts =
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&gcc LPASS_ADSP_GDSC>;
+ status = "disabled";
+ };
+
remoteproc_slpi: remoteproc@5800000 {
compatible = "qcom,msm8998-slpi-pas";
reg = <0x05800000 0x4040>;
#address-cells = <1>;
#size-cells = <0>;
- pon@800 {
+ pm8950_pon: pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x0800>;
mode-bootloader = <0x2>;
bias-pull-up;
linux,code = <KEY_POWER>;
};
+
+ pm8950_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ status = "disabled";
+ };
};
pm8950_temp: temp-alarm@2400 {
#address-cells = <1>;
#size-cells = <0>;
- pmi8950_pwm: pwm@b000 {
+ pmi8950_pwm: pwm {
compatible = "qcom,pmi8950-pwm";
- reg = <0xb000 0x100>;
#pwm-cells = <2>;
status = "disabled";
interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
<0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ovp", "short";
+ label = "backlight";
+
qcom,cabc;
qcom,external-pfet;
+
status = "disabled";
};
};
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-qcm2290";
+ compatible = "qcom,rpm-qcm2290", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
status = "okay";
};
+&sdc2_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
+
+&sdc2_cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc2_data {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
&sdhc_1 {
non-removable;
no-sd;
status = "okay";
};
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+ pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
+
+ vmmc-supply = <&vreg_l9c_2p96>;
+ vqmmc-supply = <&vreg_l6c_2p96>;
+
+ cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+};
+
&tlmm {
gpio-reserved-ranges = <32 2>, /* ADSP */
<48 4>; /* NFC */
+
+ sd_cd: sd-cd-state {
+ pins = "gpio91";
+ function = "gpio";
+ bias-pull-up;
+ };
};
&uart5 {
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-qcs404";
+ compatible = "qcom,rpm-qcs404", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
#include "sm8150.dtsi"
+&camcc {
+ power-domains = <&rpmhpd SA8155P_CX>;
+};
+
&dispcc {
power-domains = <&rpmhpd SA8155P_CX>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "sa8540p.dtsi"
#include "sa8540p-pmics.dtsi"
};
};
+ regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "USB2_VBUS";
+ gpio = <&pmm8540c_gpios 9 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb2_en>;
+ pinctrl-names = "default";
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ regulator-usb3-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "USB3_VBUS";
+ gpio = <&pmm8540e_gpios 5 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb3_en>;
+ pinctrl-names = "default";
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ regulator-usb4-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "USB4_VBUS";
+ gpio = <&pmm8540g_gpios 5 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb4_en>;
+ pinctrl-names = "default";
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ regulator-usb5-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "USB5_VBUS";
+ gpio = <&pmm8540g_gpios 9 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb5_en>;
+ pinctrl-names = "default";
+ enable-active-high;
+ regulator-always-on;
+ };
+
reserved-memory {
gpu_mem: gpu-mem@8bf00000 {
reg = <0 0x8bf00000 0 0x2000>;
status = "okay";
};
+&usb_2 {
+ status = "okay";
+};
+
&usb_2_hsphy0 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
};
};
+&pmm8540c_gpios {
+ usb2_en: usb2-en-state {
+ pins = "gpio9";
+ function = "normal";
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ output-enable;
+ power-source = <0>;
+ };
+};
+
+&pmm8540e_gpios {
+ usb3_en: usb3-en-state {
+ pins = "gpio5";
+ function = "normal";
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ output-enable;
+ power-source = <0>;
+ };
+};
+
+&pmm8540g_gpios {
+ usb4_en: usb4-en-state {
+ pins = "gpio5";
+ function = "normal";
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ output-enable;
+ power-source = <0>;
+ };
+
+ usb5_en: usb5-en-state {
+ pins = "gpio9";
+ function = "normal";
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ output-enable;
+ power-source = <0>;
+ };
+};
+
&tlmm {
pcie2a_default: pcie2a-default-state {
clkreq-n-pins {
status = "okay";
};
+&remoteproc_adsp {
+ firmware-name = "qcom/sa8775p/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp0 {
+ firmware-name = "qcom/sa8775p/cdsp0.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp1 {
+ firmware-name = "qcom/sa8775p/cdsp1.mbn";
+ status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+ firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+ status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+ firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+ status = "okay";
+};
+
&uart10 {
compatible = "qcom,geni-debug-uart";
pinctrl-0 = <&qup_uart10_default>;
#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
enable-method = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
next-level-cache = <&L2_0>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
enable-method = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
next-level-cache = <&L2_1>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
enable-method = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
next-level-cache = <&L2_2>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
L2_2: l2-cache {
compatible = "cache";
cache-level = <2>;
enable-method = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
next-level-cache = <&L2_3>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
L2_3: l2-cache {
compatible = "cache";
cache-level = <2>;
enable-method = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
next-level-cache = <&L2_4>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
L2_4: l2-cache {
compatible = "cache";
cache-level = <2>;
enable-method = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
next-level-cache = <&L2_5>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
L2_5: l2-cache {
compatible = "cache";
cache-level = <2>;
enable-method = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
next-level-cache = <&L2_6>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
L2_6: l2-cache {
compatible = "cache";
cache-level = <2>;
enable-method = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
next-level-cache = <&L2_7>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
L2_7: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
};
+
+ idle-states {
+ entry-method = "psci";
+
+ GOLD_CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "gold-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <549>;
+ exit-latency-us = <901>;
+ min-residency-us = <1774>;
+ local-timer-stop;
+ };
+
+ GOLD_RAIL_CPU_SLEEP_0: cpu-sleep-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "gold-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <702>;
+ exit-latency-us = <1061>;
+ min-residency-us = <4488>;
+ local-timer-stop;
+ };
+ };
+
+ domain-idle-states {
+ CLUSTER_SLEEP_GOLD: cluster-sleep-0 {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x41000044>;
+ entry-latency-us = <2752>;
+ exit-latency-us = <3048>;
+ min-residency-us = <6118>;
+ };
+
+ CLUSTER_SLEEP_APSS_RSC_PC: cluster-sleep-1 {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x42000144>;
+ entry-latency-us = <3263>;
+ exit-latency-us = <6562>;
+ min-residency-us = <9987>;
+ };
+ };
};
dummy-sink {
psci {
compatible = "arm,psci-1.0";
method = "smc";
+
+ CPU_PD0: power-domain-cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_0_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>,
+ <&GOLD_RAIL_CPU_SLEEP_0>;
+ };
+
+ CPU_PD1: power-domain-cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_0_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>,
+ <&GOLD_RAIL_CPU_SLEEP_0>;
+ };
+
+ CPU_PD2: power-domain-cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_0_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>,
+ <&GOLD_RAIL_CPU_SLEEP_0>;
+ };
+
+ CPU_PD3: power-domain-cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_0_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>,
+ <&GOLD_RAIL_CPU_SLEEP_0>;
+ };
+
+ CPU_PD4: power-domain-cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_1_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>,
+ <&GOLD_RAIL_CPU_SLEEP_0>;
+ };
+
+ CPU_PD5: power-domain-cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_1_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>,
+ <&GOLD_RAIL_CPU_SLEEP_0>;
+ };
+
+ CPU_PD6: power-domain-cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_1_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>,
+ <&GOLD_RAIL_CPU_SLEEP_0>;
+ };
+
+ CPU_PD7: power-domain-cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_1_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>,
+ <&GOLD_RAIL_CPU_SLEEP_0>;
+ };
+
+ CLUSTER_0_PD: power-domain-cluster0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_2_PD>;
+ domain-idle-states = <&CLUSTER_SLEEP_GOLD>;
+ };
+
+ CLUSTER_1_PD: power-domain-cluster1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_2_PD>;
+ domain-idle-states = <&CLUSTER_SLEEP_GOLD>;
+ };
+
+ CLUSTER_2_PD: power-domain-cluster2 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_SLEEP_APSS_RSC_PC>;
+ };
};
reserved-memory {
};
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp0 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp0_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp0_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp1 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <12>;
+
+ smp2p_cdsp1_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp1_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-gpdsp0 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP0 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <17>;
+
+ smp2p_gpdsp0_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_gpdsp0_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-gpdsp1 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <18>;
+
+ smp2p_gpdsp1_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_gpdsp1_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <2>;
status = "disabled";
};
+ pmu@9091000 {
+ compatible = "qcom,sa8775p-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+ reg = <0x0 0x9091000 0x0 0x1000>;
+ interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+ operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+ llcc_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <762000>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <1720000>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <2086000>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <2601000>;
+ };
+
+ opp-4 {
+ opp-peak-kBps = <2929000>;
+ };
+
+ opp-5 {
+ opp-peak-kBps = <5931000>;
+ };
+
+ opp-6 {
+ opp-peak-kBps = <6515000>;
+ };
+
+ opp-7 {
+ opp-peak-kBps = <7984000>;
+ };
+
+ opp-8 {
+ opp-peak-kBps = <10437000>;
+ };
+
+ opp-9 {
+ opp-peak-kBps = <12195000>;
+ };
+ };
+ };
+
+ pmu@90b5400 {
+ compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0x0 0x90b5400 0x0 0x600>;
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+ cpu_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <9155000>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <12298000>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <14236000>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <16265000>;
+ };
+ };
+
+ };
+
+ pmu@90b6400 {
+ compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0x0 0x90b6400 0x0 0x600>;
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+ };
+
llcc: system-cache-controller@9200000 {
compatible = "qcom,sa8775p-llcc";
reg = <0x0 0x09200000 0x0 0x80000>,
reg = <0x0 0x15000000 0x0 0x100000>;
#iommu-cells = <2>;
#global-interrupts = <2>;
+ dma-coherent;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
reg = <0x0 0x15200000 0x0 0x80000>;
#iommu-cells = <2>;
#global-interrupts = <2>;
+ dma-coherent;
interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>,
#freq-domain-cells = <1>;
};
+ remoteproc_gpdsp0: remoteproc@20c00000 {
+ compatible = "qcom,sa8775p-gpdsp0-pas";
+ reg = <0x0 0x20c00000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_gpdsp0_in 0 0>,
+ <&smp2p_gpdsp0_in 2 0>,
+ <&smp2p_gpdsp0_in 1 0>,
+ <&smp2p_gpdsp0_in 3 0>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>;
+ power-domain-names = "cx", "mxc";
+
+ interconnects = <&gpdsp_anoc MASTER_DSP0 0
+ &config_noc SLAVE_CLK_CTL 0>;
+
+ memory-region = <&pil_gdsp0_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_gpdsp0_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "gpdsp0";
+ qcom,remote-pid = <17>;
+ };
+ };
+
+ remoteproc_gpdsp1: remoteproc@21c00000 {
+ compatible = "qcom,sa8775p-gpdsp1-pas";
+ reg = <0x0 0x21c00000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_gpdsp1_in 0 0>,
+ <&smp2p_gpdsp1_in 2 0>,
+ <&smp2p_gpdsp1_in 1 0>,
+ <&smp2p_gpdsp1_in 3 0>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>;
+ power-domain-names = "cx", "mxc";
+
+ interconnects = <&gpdsp_anoc MASTER_DSP1 0
+ &config_noc SLAVE_CLK_CTL 0>;
+
+ memory-region = <&pil_gdsp1_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_gpdsp1_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "gpdsp1";
+ qcom,remote-pid = <18>;
+ };
+ };
+
ethernet1: ethernet@23000000 {
compatible = "qcom,sa8775p-ethqos";
reg = <0x0 0x23000000 0x0 0x10000>,
"ptp_ref",
"phyaux";
+ interconnects = <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "mac-mem", "cpu-mac";
+
power-domains = <&gcc EMAC1_GDSC>;
phys = <&serdes1>;
"ptp_ref",
"phyaux";
+ interconnects = <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "mac-mem", "cpu-mac";
+
power-domains = <&gcc EMAC0_GDSC>;
phys = <&serdes0>;
status = "disabled";
};
+
+ remoteproc_cdsp0: remoteproc@26300000 {
+ compatible = "qcom,sa8775p-cdsp0-pas";
+ reg = <0x0 0x26300000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP0>;
+ power-domain-names = "cx", "mxc", "nsp";
+
+ interconnects = <&nspa_noc MASTER_CDSP_PROC 0
+ &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_cdsp0_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp0_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x2141 0x04a0>,
+ <&apps_smmu 0x2161 0x04a0>,
+ <&apps_smmu 0x2181 0x0400>,
+ <&apps_smmu 0x21c1 0x04a0>,
+ <&apps_smmu 0x21e1 0x04a0>,
+ <&apps_smmu 0x2541 0x04a0>,
+ <&apps_smmu 0x2561 0x04a0>,
+ <&apps_smmu 0x2581 0x0400>,
+ <&apps_smmu 0x25c1 0x04a0>,
+ <&apps_smmu 0x25e1 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x2142 0x04a0>,
+ <&apps_smmu 0x2162 0x04a0>,
+ <&apps_smmu 0x2182 0x0400>,
+ <&apps_smmu 0x21c2 0x04a0>,
+ <&apps_smmu 0x21e2 0x04a0>,
+ <&apps_smmu 0x2542 0x04a0>,
+ <&apps_smmu 0x2562 0x04a0>,
+ <&apps_smmu 0x2582 0x0400>,
+ <&apps_smmu 0x25c2 0x04a0>,
+ <&apps_smmu 0x25e2 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x2143 0x04a0>,
+ <&apps_smmu 0x2163 0x04a0>,
+ <&apps_smmu 0x2183 0x0400>,
+ <&apps_smmu 0x21c3 0x04a0>,
+ <&apps_smmu 0x21e3 0x04a0>,
+ <&apps_smmu 0x2543 0x04a0>,
+ <&apps_smmu 0x2563 0x04a0>,
+ <&apps_smmu 0x2583 0x0400>,
+ <&apps_smmu 0x25c3 0x04a0>,
+ <&apps_smmu 0x25e3 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x2144 0x04a0>,
+ <&apps_smmu 0x2164 0x04a0>,
+ <&apps_smmu 0x2184 0x0400>,
+ <&apps_smmu 0x21c4 0x04a0>,
+ <&apps_smmu 0x21e4 0x04a0>,
+ <&apps_smmu 0x2544 0x04a0>,
+ <&apps_smmu 0x2564 0x04a0>,
+ <&apps_smmu 0x2584 0x0400>,
+ <&apps_smmu 0x25c4 0x04a0>,
+ <&apps_smmu 0x25e4 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x2145 0x04a0>,
+ <&apps_smmu 0x2165 0x04a0>,
+ <&apps_smmu 0x2185 0x0400>,
+ <&apps_smmu 0x21c5 0x04a0>,
+ <&apps_smmu 0x21e5 0x04a0>,
+ <&apps_smmu 0x2545 0x04a0>,
+ <&apps_smmu 0x2565 0x04a0>,
+ <&apps_smmu 0x2585 0x0400>,
+ <&apps_smmu 0x25c5 0x04a0>,
+ <&apps_smmu 0x25e5 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x2146 0x04a0>,
+ <&apps_smmu 0x2166 0x04a0>,
+ <&apps_smmu 0x2186 0x0400>,
+ <&apps_smmu 0x21c6 0x04a0>,
+ <&apps_smmu 0x21e6 0x04a0>,
+ <&apps_smmu 0x2546 0x04a0>,
+ <&apps_smmu 0x2566 0x04a0>,
+ <&apps_smmu 0x2586 0x0400>,
+ <&apps_smmu 0x25c6 0x04a0>,
+ <&apps_smmu 0x25e6 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x2147 0x04a0>,
+ <&apps_smmu 0x2167 0x04a0>,
+ <&apps_smmu 0x2187 0x0400>,
+ <&apps_smmu 0x21c7 0x04a0>,
+ <&apps_smmu 0x21e7 0x04a0>,
+ <&apps_smmu 0x2547 0x04a0>,
+ <&apps_smmu 0x2567 0x04a0>,
+ <&apps_smmu 0x2587 0x0400>,
+ <&apps_smmu 0x25c7 0x04a0>,
+ <&apps_smmu 0x25e7 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x2148 0x04a0>,
+ <&apps_smmu 0x2168 0x04a0>,
+ <&apps_smmu 0x2188 0x0400>,
+ <&apps_smmu 0x21c8 0x04a0>,
+ <&apps_smmu 0x21e8 0x04a0>,
+ <&apps_smmu 0x2548 0x04a0>,
+ <&apps_smmu 0x2568 0x04a0>,
+ <&apps_smmu 0x2588 0x0400>,
+ <&apps_smmu 0x25c8 0x04a0>,
+ <&apps_smmu 0x25e8 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@9 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <9>;
+ iommus = <&apps_smmu 0x2149 0x04a0>,
+ <&apps_smmu 0x2169 0x04a0>,
+ <&apps_smmu 0x2189 0x0400>,
+ <&apps_smmu 0x21c9 0x04a0>,
+ <&apps_smmu 0x21e9 0x04a0>,
+ <&apps_smmu 0x2549 0x04a0>,
+ <&apps_smmu 0x2569 0x04a0>,
+ <&apps_smmu 0x2589 0x0400>,
+ <&apps_smmu 0x25c9 0x04a0>,
+ <&apps_smmu 0x25e9 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@10 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <10>;
+ iommus = <&apps_smmu 0x214a 0x04a0>,
+ <&apps_smmu 0x216a 0x04a0>,
+ <&apps_smmu 0x218a 0x0400>,
+ <&apps_smmu 0x21ca 0x04a0>,
+ <&apps_smmu 0x21ea 0x04a0>,
+ <&apps_smmu 0x254a 0x04a0>,
+ <&apps_smmu 0x256a 0x04a0>,
+ <&apps_smmu 0x258a 0x0400>,
+ <&apps_smmu 0x25ca 0x04a0>,
+ <&apps_smmu 0x25ea 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@11 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <11>;
+ iommus = <&apps_smmu 0x214b 0x04a0>,
+ <&apps_smmu 0x216b 0x04a0>,
+ <&apps_smmu 0x218b 0x0400>,
+ <&apps_smmu 0x21cb 0x04a0>,
+ <&apps_smmu 0x21eb 0x04a0>,
+ <&apps_smmu 0x254b 0x04a0>,
+ <&apps_smmu 0x256b 0x04a0>,
+ <&apps_smmu 0x258b 0x0400>,
+ <&apps_smmu 0x25cb 0x04a0>,
+ <&apps_smmu 0x25eb 0x04a0>;
+ dma-coherent;
+ };
+ };
+ };
+ };
+
+ remoteproc_cdsp1: remoteproc@2a300000 {
+ compatible = "qcom,sa8775p-cdsp1-pas";
+ reg = <0x0 0x2A300000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP1>;
+ power-domain-names = "cx", "mxc", "nsp";
+
+ interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
+ &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_cdsp1_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp1_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <12>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x2941 0x04a0>,
+ <&apps_smmu 0x2961 0x04a0>,
+ <&apps_smmu 0x2981 0x0400>,
+ <&apps_smmu 0x29c1 0x04a0>,
+ <&apps_smmu 0x29e1 0x04a0>,
+ <&apps_smmu 0x2d41 0x04a0>,
+ <&apps_smmu 0x2d61 0x04a0>,
+ <&apps_smmu 0x2d81 0x0400>,
+ <&apps_smmu 0x2dc1 0x04a0>,
+ <&apps_smmu 0x2de1 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x2942 0x04a0>,
+ <&apps_smmu 0x2962 0x04a0>,
+ <&apps_smmu 0x2982 0x0400>,
+ <&apps_smmu 0x29c2 0x04a0>,
+ <&apps_smmu 0x29e2 0x04a0>,
+ <&apps_smmu 0x2d42 0x04a0>,
+ <&apps_smmu 0x2d62 0x04a0>,
+ <&apps_smmu 0x2d82 0x0400>,
+ <&apps_smmu 0x2dc2 0x04a0>,
+ <&apps_smmu 0x2de2 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x2943 0x04a0>,
+ <&apps_smmu 0x2963 0x04a0>,
+ <&apps_smmu 0x2983 0x0400>,
+ <&apps_smmu 0x29c3 0x04a0>,
+ <&apps_smmu 0x29e3 0x04a0>,
+ <&apps_smmu 0x2d43 0x04a0>,
+ <&apps_smmu 0x2d63 0x04a0>,
+ <&apps_smmu 0x2d83 0x0400>,
+ <&apps_smmu 0x2dc3 0x04a0>,
+ <&apps_smmu 0x2de3 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x2944 0x04a0>,
+ <&apps_smmu 0x2964 0x04a0>,
+ <&apps_smmu 0x2984 0x0400>,
+ <&apps_smmu 0x29c4 0x04a0>,
+ <&apps_smmu 0x29e4 0x04a0>,
+ <&apps_smmu 0x2d44 0x04a0>,
+ <&apps_smmu 0x2d64 0x04a0>,
+ <&apps_smmu 0x2d84 0x0400>,
+ <&apps_smmu 0x2dc4 0x04a0>,
+ <&apps_smmu 0x2de4 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x2945 0x04a0>,
+ <&apps_smmu 0x2965 0x04a0>,
+ <&apps_smmu 0x2985 0x0400>,
+ <&apps_smmu 0x29c5 0x04a0>,
+ <&apps_smmu 0x29e5 0x04a0>,
+ <&apps_smmu 0x2d45 0x04a0>,
+ <&apps_smmu 0x2d65 0x04a0>,
+ <&apps_smmu 0x2d85 0x0400>,
+ <&apps_smmu 0x2dc5 0x04a0>,
+ <&apps_smmu 0x2de5 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x2946 0x04a0>,
+ <&apps_smmu 0x2966 0x04a0>,
+ <&apps_smmu 0x2986 0x0400>,
+ <&apps_smmu 0x29c6 0x04a0>,
+ <&apps_smmu 0x29e6 0x04a0>,
+ <&apps_smmu 0x2d46 0x04a0>,
+ <&apps_smmu 0x2d66 0x04a0>,
+ <&apps_smmu 0x2d86 0x0400>,
+ <&apps_smmu 0x2dc6 0x04a0>,
+ <&apps_smmu 0x2de6 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x2947 0x04a0>,
+ <&apps_smmu 0x2967 0x04a0>,
+ <&apps_smmu 0x2987 0x0400>,
+ <&apps_smmu 0x29c7 0x04a0>,
+ <&apps_smmu 0x29e7 0x04a0>,
+ <&apps_smmu 0x2d47 0x04a0>,
+ <&apps_smmu 0x2d67 0x04a0>,
+ <&apps_smmu 0x2d87 0x0400>,
+ <&apps_smmu 0x2dc7 0x04a0>,
+ <&apps_smmu 0x2de7 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x2948 0x04a0>,
+ <&apps_smmu 0x2968 0x04a0>,
+ <&apps_smmu 0x2988 0x0400>,
+ <&apps_smmu 0x29c8 0x04a0>,
+ <&apps_smmu 0x29e8 0x04a0>,
+ <&apps_smmu 0x2d48 0x04a0>,
+ <&apps_smmu 0x2d68 0x04a0>,
+ <&apps_smmu 0x2d88 0x0400>,
+ <&apps_smmu 0x2dc8 0x04a0>,
+ <&apps_smmu 0x2de8 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@9 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <9>;
+ iommus = <&apps_smmu 0x2949 0x04a0>,
+ <&apps_smmu 0x2969 0x04a0>,
+ <&apps_smmu 0x2989 0x0400>,
+ <&apps_smmu 0x29c9 0x04a0>,
+ <&apps_smmu 0x29e9 0x04a0>,
+ <&apps_smmu 0x2d49 0x04a0>,
+ <&apps_smmu 0x2d69 0x04a0>,
+ <&apps_smmu 0x2d89 0x0400>,
+ <&apps_smmu 0x2dc9 0x04a0>,
+ <&apps_smmu 0x2de9 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@10 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <10>;
+ iommus = <&apps_smmu 0x294a 0x04a0>,
+ <&apps_smmu 0x296a 0x04a0>,
+ <&apps_smmu 0x298a 0x0400>,
+ <&apps_smmu 0x29ca 0x04a0>,
+ <&apps_smmu 0x29ea 0x04a0>,
+ <&apps_smmu 0x2d4a 0x04a0>,
+ <&apps_smmu 0x2d6a 0x04a0>,
+ <&apps_smmu 0x2d8a 0x0400>,
+ <&apps_smmu 0x2dca 0x04a0>,
+ <&apps_smmu 0x2dea 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@11 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <11>;
+ iommus = <&apps_smmu 0x294b 0x04a0>,
+ <&apps_smmu 0x296b 0x04a0>,
+ <&apps_smmu 0x298b 0x0400>,
+ <&apps_smmu 0x29cb 0x04a0>,
+ <&apps_smmu 0x29eb 0x04a0>,
+ <&apps_smmu 0x2d4b 0x04a0>,
+ <&apps_smmu 0x2d6b 0x04a0>,
+ <&apps_smmu 0x2d8b 0x0400>,
+ <&apps_smmu 0x2dcb 0x04a0>,
+ <&apps_smmu 0x2deb 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@12 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <12>;
+ iommus = <&apps_smmu 0x294c 0x04a0>,
+ <&apps_smmu 0x296c 0x04a0>,
+ <&apps_smmu 0x298c 0x0400>,
+ <&apps_smmu 0x29cc 0x04a0>,
+ <&apps_smmu 0x29ec 0x04a0>,
+ <&apps_smmu 0x2d4c 0x04a0>,
+ <&apps_smmu 0x2d6c 0x04a0>,
+ <&apps_smmu 0x2d8c 0x0400>,
+ <&apps_smmu 0x2dcc 0x04a0>,
+ <&apps_smmu 0x2dec 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@13 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <13>;
+ iommus = <&apps_smmu 0x294d 0x04a0>,
+ <&apps_smmu 0x296d 0x04a0>,
+ <&apps_smmu 0x298d 0x0400>,
+ <&apps_smmu 0x29Cd 0x04a0>,
+ <&apps_smmu 0x29ed 0x04a0>,
+ <&apps_smmu 0x2d4d 0x04a0>,
+ <&apps_smmu 0x2d6d 0x04a0>,
+ <&apps_smmu 0x2d8d 0x0400>,
+ <&apps_smmu 0x2dcd 0x04a0>,
+ <&apps_smmu 0x2ded 0x04a0>;
+ dma-coherent;
+ };
+ };
+ };
+ };
+
+ remoteproc_adsp: remoteproc@30000000 {
+ compatible = "qcom,sa8775p-adsp-pas";
+ reg = <0x0 0x30000000 0x0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ memory-region = <&adsp_rpc_remote_heap_mem>;
+ qcom,vmids = <QCOM_SCM_VMID_LPASS
+ QCOM_SCM_VMID_ADSP_HEAP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x3003 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x3004 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x3005 0x0>;
+ qcom,nsessions = <5>;
+ dma-coherent;
+ };
+ };
+ };
+ };
};
thermal-zones {
status = "okay";
};
+&pmc8180_pwrkey {
+ status = "okay";
+};
+
&pmc8180c_lpg {
status = "okay";
};
status = "okay";
};
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdda-pll-supply = <&vreg_l5e_0p88>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l16e_3p0>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdda-pll-supply = <&vreg_l5e_0p88>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l16e_3p0>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3c_1p2>;
+ vdda-pll-supply = <&vreg_l5e_0p88>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3c_1p2>;
+ vdda-pll-supply = <&vreg_l5e_0p88>;
+
+ status = "okay";
+};
+
&usb_prim_hsphy {
vdda-pll-supply = <&vreg_l5e_0p88>;
vdda18-supply = <&vreg_l12a_1p8>;
pon: pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x0800>;
- pwrkey {
+ pmc8180_pwrkey: pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
- pmc8180_gpios: gpio@c000 {
+ pmc8180_1_gpios: gpio@c000 {
compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pmc8180_gpios 0 0 10>;
+ gpio-ranges = <&pmc8180_1_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
#size-cells = <0>;
};
- pmic@8 {
+ pmc8180_2: pmic@8 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x8 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pmc8180_2_gpios: gpio@c000 {
+ compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ gpio-ranges = <&pmc8180_2_gpios 0 0 10>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
pmic@a {
vin-supply = <&vph_pwr>;
};
+ vreg_usb2_host_en: regulator-usb2-host-en {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2_host_en";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&pmc8180_1_gpios 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ regulator-always-on;
+ };
+
+ vreg_usb3_host_en: regulator-usb3-host-en {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3_host_en";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&pmc8180_2_gpios 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ regulator-always-on;
+ };
+
usbprim-sbu-mux {
compatible = "pericom,pi3usb102", "gpio-sbu-mux";
status = "okay";
};
+&pmc8180_pwrkey {
+ status = "okay";
+};
+
&pmc8180c_lpg {
status = "okay";
};
status = "okay";
};
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdda-pll-supply = <&vreg_l5e_0p88>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l16e_3p0>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdda-pll-supply = <&vreg_l5e_0p88>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l16e_3p0>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3c_1p2>;
+ vdda-pll-supply = <&vreg_l5e_0p88>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3c_1p2>;
+ vdda-pll-supply = <&vreg_l5e_0p88>;
+
+ status = "okay";
+};
+
&usb_prim_hsphy {
vdda-pll-supply = <&vreg_l5e_0p88>;
vdda18-supply = <&vreg_l12a_1p8>;
status = "disabled";
};
+ usb_mp_hsphy0: phy@88e4000 {
+ compatible = "qcom,sc8180x-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e4000 0 0x400>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_MP0_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_mp_hsphy1: phy@88e5000 {
+ compatible = "qcom,sc8180x-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e5000 0 0x400>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_MP1_BCR>;
+
+ status = "disabled";
+ };
+
usb_prim_qmpphy: phy@88e8000 {
compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
reg = <0 0x088e8000 0 0x3000>;
};
};
+ usb_mp_qmpphy0: phy@88eb000 {
+ compatible = "qcom,sc8180x-qmp-usb3-uni-phy";
+ reg = <0 0x088eb000 0 0x1000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb2_phy0_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_mp_qmpphy1: phy@88ec000 {
+ compatible = "qcom,sc8180x-qmp-usb3-uni-phy";
+ reg = <0 0x088ec000 0 0x1000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb2_phy1_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
usb_sec_qmpphy: phy@88ee000 {
compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
reg = <0 0x088ed000 0 0x3000>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ usb_mp: usb@a4f8800 {
+ compatible = "qcom,sc8180x-dwc3-mp", "qcom,dwc3";
+ reg = <0 0x0a4f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_SLEEP_CLK>,
+ <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ interconnects = <&aggre1_noc MASTER_USB3_2 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_2 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 59 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 46 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 71 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 68 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event_1", "pwr_event_2",
+ "hs_phy_1", "hs_phy_2",
+ "dp_hs_phy_1", "dm_hs_phy_1",
+ "dp_hs_phy_2", "dm_hs_phy_2",
+ "ss_phy_1", "ss_phy_2";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ resets = <&gcc GCC_USB30_MP_BCR>;
+
+ status = "disabled";
+
+ usb_mp_dwc3: usb@a400000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a400000 0 0xcd00>;
+ interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x60 0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_mp_hsphy0>,
+ <&usb_mp_qmpphy0>,
+ <&usb_mp_hsphy1>,
+ <&usb_mp_qmpphy1>;
+ phy-names = "usb2-0",
+ "usb3-0",
+ "usb2-1",
+ "usb3-1";
+ dr_mode = "host";
+ };
+ };
+
usb_prim: usb@a6f8800 {
compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
- interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
<&pdc 8 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "hs_phy_irq",
- "ss_phy_irq",
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
"dm_hs_phy_irq",
- "dp_hs_phy_irq";
+ "ss_phy_irq";
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
"xo";
resets = <&gcc GCC_USB30_SEC_BCR>;
power-domains = <&gcc USB30_SEC_GDSC>;
- interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 40 IRQ_TYPE_LEVEL_HIGH>,
+
+ interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
<&pdc 10 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
+ <&pdc 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>;
pins = "gpio143";
function = "gpio";
drive-strength = <2>;
- bias-pull-down;
+ bias-disable;
};
wake-n-pins {
- pins = "gpio145";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
+ pins = "gpio145";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
pcie3a_default: pcie3a-default-state {
pins = "gpio151";
function = "gpio";
drive-strength = <2>;
- bias-pull-down;
+ bias-disable;
};
wake-n-pins {
pins = "gpio141";
function = "gpio";
drive-strength = <2>;
- bias-pull-down;
+ bias-disable;
};
wake-n-pins {
};
};
+&camss {
+ vdda-phy-supply = <&vreg_l6d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+
+ ports {
+ port@0 {
+ csiphy0_lanes01_ep: endpoint@0 {
+ reg = <0>;
+ clock-lanes = <7>;
+ data-lanes = <0 1>;
+ remote-endpoint = <&ov5675_ep>;
+ };
+ };
+ };
+};
+
+&cci2 {
+ status = "okay";
+};
+
+&cci2_i2c1 {
+ camera@10 {
+ compatible = "ovti,ov5675";
+ reg = <0x10>;
+
+ reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_rgb_default>;
+
+ clocks = <&camcc CAMCC_MCLK3_CLK>;
+
+ orientation = <0>; /* Front facing */
+
+ avdd-supply = <&vreg_l6q>;
+ dvdd-supply = <&vreg_l2q>;
+ dovdd-supply = <&vreg_l7q>;
+
+ port {
+ ov5675_ep: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <450000000>;
+ remote-endpoint = <&csiphy0_lanes01_ep>;
+ };
+ };
+
+ };
+};
+
&dispcc0 {
status = "okay";
};
bias-disable;
};
+ cam_rgb_default: cam-rgb-default-state {
+ mclk-pins {
+ pins = "gpio17";
+ function = "cam_mclk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ sc-rgb-xshut-n-pins {
+ pins = "gpio15";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
edp_reg_en: edp-reg-en-state {
pins = "gpio25";
function = "gpio";
pins = "gpio143";
function = "gpio";
drive-strength = <2>;
- bias-pull-down;
+ bias-disable;
};
wake-n-pins {
- pins = "gpio145";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
+ pins = "gpio145";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
pcie3a_default: pcie3a-default-state {
pins = "gpio151";
function = "gpio";
drive-strength = <2>;
- bias-pull-down;
+ bias-disable;
};
wake-n-pins {
pins = "gpio141";
function = "gpio";
drive-strength = <2>;
- bias-pull-down;
+ bias-disable;
};
wake-n-pins {
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sdm660";
+ compatible = "qcom,rpm-sdm660", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
status = "okay";
};
+&remoteproc_mpss {
+ firmware-name = "qcom/sdx75/modem.mbn",
+ "qcom/sdx75/modem_dtb.mbn";
+ status = "okay";
+};
+
&sdhc {
cd-gpios = <&tlmm 103 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_2v95_vdd>;
no-map;
};
- qdss_mem: qdss@88800000 {
+ qdss_mem: qdss@88500000 {
+ reg = <0x0 0x88500000 0x0 0x300000>;
+ no-map;
+ };
+
+ qlink_logging_mem: qlink-logging@88800000 {
reg = <0x0 0x88800000 0x0 0x300000>;
no-map;
};
no-map;
};
- mpss_dsmharq_mem: mpss-dsmharq@88f00000 {
- reg = <0x0 0x88f00000 0x0 0x5080000>;
+ mpss_dsm_mem_2: mpss-dsm-2@88f00000 {
+ reg = <0x0 0x88f00000 0x0 0x2500000>;
+ no-map;
+ };
+
+ mpss_dsm_mem: mpss-dsm@8b400000 {
+ reg = <0x0 0x8b400000 0x0 0x2b80000>;
no-map;
};
};
mpssadsp_mem: mpssadsp@8e000000 {
- reg = <0x0 0x8e000000 0x0 0xf400000>;
+ reg = <0x0 0x8e000000 0x0 0xf100000>;
no-map;
};
reg = <0x0 0x01fc0000 0x0 0x30000>;
};
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sdx75-mpss-pas";
+ reg = <0 0x04080000 0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MSS>;
+ power-domain-names = "cx",
+ "mss";
+
+ memory-region = <&mpssadsp_mem>, <&q6_mpss_dtb_mem>,
+ <&mpss_dsm_mem>, <&mpss_dsm_mem_2>,
+ <&qlink_logging_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_modem_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_PING
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_PING>;
+ label = "mpss";
+ qcom,remote-pid = <1>;
+ };
+ };
+
sdhc: mmc@8804000 {
compatible = "qcom,sdx75-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0 0x08804000 0x0 0x1000>;
*/
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm4450-camcc.h>
+#include <dt-bindings/clock/qcom,sm4450-dispcc.h>
#include <dt-bindings/clock/qcom,sm4450-gcc.h>
+#include <dt-bindings/clock/qcom,sm4450-gpucc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#hwlock-cells = <1>;
};
+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sm4450-gpucc";
+ reg = <0x0 0x03d90000 0x0 0xa000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ camcc: clock-controller@ade0000 {
+ compatible = "qcom,sm4450-camcc";
+ reg = <0x0 0x0ade0000 0x0 0x20000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_CAMERA_AHB_CLK>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm4450-dispcc";
+ reg = <0x0 0x0af00000 0x0 0x20000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm4450-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ * Copyright (c) 2023 - 2024, Dang Huynh <danct12@riseup.net>
*/
/dts-v1/;
#include "sm6115.dtsi"
#include "pm6125.dtsi"
+#include "pmi632.dtsi"
#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
/ {
model = "F(x)tec Pro1X (QX1050)";
};
};
+ disp_elvdd_supply: disp-elvdd-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "disp_elvdd_supply";
+ };
+
+ disp_elvss_supply: disp-elvss-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "disp_elvss_supply";
+ };
+
+ disp_vcc_supply: disp-vcc-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "disp_vcc_supply";
+ };
+
+ disp_vci_supply: disp-vci-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "disp_vci_supply";
+ };
+
gpio-keys {
compatible = "gpio-keys";
- pinctrl-0 = <&vol_up_n>;
+ pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>;
pinctrl-names = "default";
+ hall-switch {
+ label = "Hall Switch";
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_KEYPAD_SLIDE>;
+ gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <90>;
+ wakeup-source;
+ };
+
+ key-camera {
+ label = "Camera Button";
+ linux,code = <KEY_CAMERA>;
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ };
+
key-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
};
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ capslock-led {
+ label = "green:capslock";
+ function = LED_FUNCTION_CAPSLOCK;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pca9534 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "kbd-capslock";
+ default-state = "off";
+ };
+ };
+
+ ts_vdd_supply: ts-vdd-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "ts_vdd_supply";
+ gpio = <&pca9534 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ ts_vddio_supply: ts-vddio-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "ts_vddio_supply";
+ gpio = <&pca9534 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
-&dispcc {
- /* HACK: disable until a panel driver is ready to retain simplefb */
- status = "disabled";
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn";
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ pca9534: gpio@21 {
+ compatible = "nxp,pca9534";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+ clock-frequency = <100000>;
+
+ touchscreen@14 {
+ compatible = "goodix,gt9286";
+ reg = <0x14>;
+
+ interrupts-extended = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>;
+
+ irq-gpios = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+ AVDD28-supply = <&ts_vdd_supply>;
+ VDDIO-supply = <&ts_vddio_supply>;
+
+ pinctrl-0 = <&ts_int_n>, <&ts_rst_n>;
+ pinctrl-names = "default";
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&pm6125_l18a>;
+ status = "okay";
+
+ panel: panel@0 {
+ compatible = "boe,bf060y8m-aj0";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+
+ elvdd-supply = <&disp_elvdd_supply>;
+ elvss-supply = <&disp_elvss_supply>;
+ vcc-supply = <&disp_vcc_supply>;
+ vci-supply = <&disp_vci_supply>;
+ vddio-supply = <&pm6125_l9a>;
+
+ pinctrl-0 = <&mdss_dsi_n &panel_en_n>;
+ pinctrl-names = "default";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
};
&pm6125_gpios {
};
};
+&pmi632_lpg {
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+};
+
+&pmi632_typec {
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "dual";
+ data-role = "dual";
+ self-powered;
+
+ typec-power-opmode = "default";
+ pd-disable;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pmi632_hs_in: endpoint {
+ remote-endpoint = <&usb_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pmi632_ss_in: endpoint {
+ remote-endpoint = <&usb_qmpphy_out>;
+ };
+ };
+ };
+ };
+};
+
+&pmi632_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <1000000>;
+ status = "okay";
+};
+
&pon_pwrkey {
status = "okay";
};
status = "okay";
};
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm6115/Fxtec/QX1050/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm6115/Fxtec/QX1050/cdsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm6115/Fxtec/QX1050/modem.mbn";
+ status = "okay";
+};
+
&rpm_requests {
regulators-0 {
compatible = "qcom,rpm-pm6125-regulators";
pm6125_l5a: l5 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <3056000>;
+ regulator-allow-set-load;
};
pm6125_l6a: l6 {
};
};
+&sdc2_state_off {
+ cd-pins {
+ pins = "gpio88";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&sdc2_state_on {
+ cd-pins {
+ pins = "gpio88";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&pm6125_l22a>;
+ vqmmc-supply = <&pm6125_l5a>;
+
+ status = "okay";
+};
+
&sleep_clk {
clock-frequency = <32764>;
};
&tlmm {
gpio-reserved-ranges = <0 4>, <14 4>;
+
+ key_camera_n: key-camera-n-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ panel_en_n: panel-en-n-state {
+ pins = "gpio65";
+ function = "gpio";
+ bias-disable;
+ };
+
+ ts_rst_n: ts-rst-n-state {
+ pins = "gpio71";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_int_n: ts-int-n-state {
+ pins = "gpio80";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdss_dsi_n: mdss-dsi-n-state {
+ pins = "gpio82";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ hall_sensor_n: hall-sensor-n-state {
+ pins = "gpio96";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
&ufs_mem_hc {
status = "okay";
};
-&usb_dwc3 {
- /delete-property/ usb-role-switch;
- maximum-speed = "high-speed";
- dr_mode = "peripheral";
+&usb_dwc3_hs {
+ remote-endpoint = <&pmi632_hs_in>;
};
&usb_hsphy {
status = "okay";
};
+&usb_qmpphy {
+ vdda-phy-supply = <&pm6125_l4a>;
+ vdda-pll-supply = <&pm6125_l12a>;
+ status = "okay";
+};
+
+&usb_qmpphy_out {
+ remote-endpoint = <&pmi632_ss_in>;
+};
+
+&wifi {
+ vdd-0.8-cx-mx-supply = <&pm6125_l8a>;
+ vdd-1.8-xo-supply = <&pm6125_l16a>;
+ vdd-1.3-rfa-supply = <&pm6125_l17a>;
+ vdd-3.3-ch0-supply = <&pm6125_l23a>;
+
+ qcom,ath10k-calibration-variant = "Fxtec_QX1050";
+
+ status = "okay";
+};
+
&xo_board {
clock-frequency = <19200000>;
};
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sm6115";
+ compatible = "qcom,rpm-sm6115", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sm6125";
+ compatible = "qcom,rpm-sm6125", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sm6375";
+ compatible = "qcom,rpm-sm6375", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
};
&ufs_mem_hc {
+ reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
+
vcc-supply = <&vreg_l19a_3p0>;
vcc-max-microamp = <600000>;
vccq2-supply = <&vreg_l12a_1p8>;
};
&gpu {
- /*
- * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
- * after display support is added on this board.
- */
- compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
status = "okay";
};
#include <dt-bindings/clock/qcom,videocc-sm8150.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sm8150.h>
+#include <dt-bindings/clock/qcom,sm8150-camcc.h>
#include <dt-bindings/thermal/thermal.h>
/ {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ camcc: clock-controller@ad00000 {
+ compatible = "qcom,sm8150-camcc";
+ reg = <0 0x0ad00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_CAMERA_AHB_CLK>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mdss: display-subsystem@ae00000 {
compatible = "qcom,sm8150-mdss";
reg = <0 0x0ae00000 0 0x1000>;
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
-#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
-#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
wsamacro: codec@3240000 {
compatible = "qcom,sm8250-lpass-wsa-macro";
reg = <0 0x03240000 0 0x1000>;
- clocks = <&audiocc LPASS_CDC_WSA_MCLK>,
- <&audiocc LPASS_CDC_WSA_NPL>,
+ clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&aoncc LPASS_CDC_VA_MCLK>,
<&vamacro>;
- clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
#clock-cells = <0>;
clock-output-names = "mclk";
status = "disabled";
};
- audiocc: clock-controller@3300000 {
- compatible = "qcom,sm8250-lpass-audiocc";
- reg = <0 0x03300000 0 0x30000>;
- #clock-cells = <1>;
- clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- clock-names = "core", "audio", "bus";
- };
-
vamacro: codec@3370000 {
compatible = "qcom,sm8250-lpass-va-macro";
reg = <0 0x03370000 0 0x1000>;
- clocks = <&aoncc LPASS_CDC_VA_MCLK>,
+ clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
#size-cells = <0>;
};
- aoncc: clock-controller@3380000 {
- compatible = "qcom,sm8250-lpass-aoncc";
- reg = <0 0x03380000 0 0x40000>;
- #clock-cells = <1>;
- clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- clock-names = "core", "audio", "bus";
- };
-
lpass_tlmm: pinctrl@33c0000 {
compatible = "qcom,sm8250-lpass-lpi-pinctrl";
reg = <0 0x033c0000 0x0 0x20000>,
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
};
+ refgen: regulator@88e7000 {
+ compatible = "qcom,sm8350-refgen-regulator",
+ "qcom,sm8250-refgen-regulator";
+ reg = <0x0 0x088e7000 0x0 0x84>;
+ };
+
usb_1_qmpphy: phy@88e8000 {
compatible = "qcom,sm8350-qmp-usb3-dp-phy";
reg = <0 0x088e8000 0 0x3000>;
reg-names = "mdss";
interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
- <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
- interconnect-names = "mdp0-mem", "mdp1-mem";
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem",
+ "cpu-cfg";
power-domains = <&dispcc MDSS_GDSC>;
resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
operating-points-v2 = <&dsi0_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
+ refgen-supply = <&refgen>;
phys = <&mdss_dsi0_phy>;
operating-points-v2 = <&dsi1_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
+ refgen-supply = <&refgen>;
phys = <&mdss_dsi1_phy>;
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
- <&pcie1_phy>,
+ <&pcie1_phy QMP_PCIE_PIPE_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
};
};
};
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>;
+
+ wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vreg_s5g_0p85>;
+ vddio-supply = <&vreg_l15b_1p8>;
+ vddaon-supply = <&vreg_s2g_0p85>;
+ vdddig-supply = <&vreg_s4e_0p95>;
+ vddrfa1p2-supply = <&vreg_s4g_1p25>;
+ vddrfa1p8-supply = <&vreg_s6g_1p86>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
};
&apps_rsc {
status = "okay";
};
+&pcieport0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
&pcie0_phy {
vdda-phy-supply = <&vreg_l1e_0p88>;
vdda-pll-supply = <&vreg_l3e_1p2>;
status = "okay";
};
+&pmk8550_gpios {
+ pmk8550_sleep_clk: sleep-clk-state {
+ pins = "gpio3";
+ function = "func1";
+ input-disable;
+ output-enable;
+ bias-disable;
+ power-source = <0>;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
bias-disable;
output-low;
};
+
+ wlan_en: wlan-en-state {
+ pins = "gpio80";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
};
&uart7 {
bluetooth {
compatible = "qcom,wcn7850-bt";
- vddio-supply = <&vreg_l15b_1p8>;
- vddaon-supply = <&vreg_s4e_0p95>;
- vdddig-supply = <&vreg_s4e_0p95>;
- vddrfa0p8-supply = <&vreg_s4e_0p95>;
- vddrfa1p2-supply = <&vreg_s4g_1p25>;
- vddrfa1p9-supply = <&vreg_s6g_1p86>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
max-speed = <3200000>;
-
- enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
- swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&bt_default>;
- pinctrl-names = "default";
};
};
compatible = "qcom,wcn7850-pmu";
pinctrl-names = "default";
- pinctrl-0 = <&wlan_en>, <&pmk8550_sleep_clk>;
+ pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>;
wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
- /*
- * TODO Add bt-enable-gpios once the Bluetooth driver is
- * converted to using the power sequencer.
- */
+ bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
vdd-supply = <&vreg_s5g_0p85>;
vddio-supply = <&vreg_l15b_1p8>;
bluetooth {
compatible = "qcom,wcn7850-bt";
- vddio-supply = <&vreg_l15b_1p8>;
- vddaon-supply = <&vreg_s4e_0p95>;
- vdddig-supply = <&vreg_s4e_0p95>;
- vddrfa0p8-supply = <&vreg_s4e_0p95>;
- vddrfa1p2-supply = <&vreg_s4g_1p25>;
- vddrfa1p9-supply = <&vreg_s6g_1p86>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
max-speed = <3200000>;
-
- enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
- swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&bt_default>;
- pinctrl-names = "default";
};
};
#power-domain-cells = <1>;
};
+ cci0: cci@ac15000 {
+ compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac15000 0 0x1000>;
+ interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+ pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+ pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@ac16000 {
+ compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac16000 0 0x1000>;
+ interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+ pinctrl-0 = <&cci1_0_default>;
+ pinctrl-1 = <&cci1_0_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci2: cci@ac17000 {
+ compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac17000 0 0x1000>;
+ interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_2_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+ pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+ pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci2_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci2_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camcc: clock-controller@ade0000 {
compatible = "qcom,sm8550-camcc";
reg = <0 0x0ade0000 0 0x20000>;
gpio-ranges = <&tlmm 0 0 211>;
wakeup-parent = <&pdc>;
+ cci0_0_default: cci0-0-default-state {
+ sda-pins {
+ pins = "gpio110";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio111";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci0_0_sleep: cci0-0-sleep-state {
+ sda-pins {
+ pins = "gpio110";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio111";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci0_1_default: cci0-1-default-state {
+ sda-pins {
+ pins = "gpio112";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio113";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci0_1_sleep: cci0-1-sleep-state {
+ sda-pins {
+ pins = "gpio112";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio113";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci1_0_default: cci1-0-default-state {
+ sda-pins {
+ pins = "gpio114";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio115";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci1_0_sleep: cci1-0-sleep-state {
+ sda-pins {
+ pins = "gpio114";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio115";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci2_0_default: cci2-0-default-state {
+ sda-pins {
+ pins = "gpio74";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio75";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci2_0_sleep: cci2-0-sleep-state {
+ sda-pins {
+ pins = "gpio74";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio75";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci2_1_default: cci2-1-default-state {
+ sda-pins {
+ pins = "gpio0";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio1";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci2_1_sleep: cci2-1-sleep-state {
+ sda-pins {
+ pins = "gpio0";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio1";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
hub_i2c0_data_clk: hub-i2c0-data-clk-state {
/* SDA, SCL */
pins = "gpio16", "gpio17";
compatible = "qcom,wcn7850-pmu";
pinctrl-names = "default";
- pinctrl-0 = <&wlan_en>;
+ pinctrl-0 = <&wlan_en>, <&bt_default>;
wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
- /*
- * TODO Add bt-enable-gpios once the Bluetooth driver is
- * converted to using the power sequencer.
- */
+ bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
vdd-supply = <&vreg_s4i_0p85>;
vddio-supply = <&vreg_l15b_1p8>;
bluetooth {
compatible = "qcom,wcn7850-bt";
- vddio-supply = <&vreg_l3c_1p2>;
- vddaon-supply = <&vreg_l15b_1p8>;
- vdddig-supply = <&vreg_s3c_0p9>;
- vddrfa0p8-supply = <&vreg_s3c_0p9>;
- vddrfa1p2-supply = <&vreg_s1c_1p2>;
- vddrfa1p9-supply = <&vreg_s6c_1p8>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
max-speed = <3200000>;
-
- enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
- swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&bt_default>;
- pinctrl-names = "default";
};
};
compatible = "qcom,wcn7850-pmu";
pinctrl-names = "default";
- pinctrl-0 = <&wlan_en>;
+ pinctrl-0 = <&wlan_en>, <&bt_default>;
wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
- /*
- * TODO Add bt-enable-gpios once the Bluetooth driver is
- * converted to using the power sequencer.
- */
+ bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
vdd-supply = <&vreg_s4i_0p85>;
vddio-supply = <&vreg_l15b_1p8>;
bluetooth {
compatible = "qcom,wcn7850-bt";
- clocks = <&rpmhcc RPMH_RF_CLK1>;
-
- vddio-supply = <&vreg_l3c_1p2>;
- vddaon-supply = <&vreg_l15b_1p8>;
- vdddig-supply = <&vreg_s3c_0p9>;
- vddrfa0p8-supply = <&vreg_s3c_0p9>;
- vddrfa1p2-supply = <&vreg_s1c_1p2>;
- vddrfa1p9-supply = <&vreg_s6c_1p8>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
max-speed = <3200000>;
-
- enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
- swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&bt_default>;
- pinctrl-names = "default";
};
};
#power-domain-cells = <1>;
};
+ cci0: cci@ac15000 {
+ compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac15000 0 0x1000>;
+ interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+ pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+ pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@ac16000 {
+ compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac16000 0 0x1000>;
+ interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+ pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+ pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci2: cci@ac17000 {
+ compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac17000 0 0x1000>;
+ interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_2_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+ pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+ pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci2_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci2_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camcc: clock-controller@ade0000 {
compatible = "qcom,sm8650-camcc";
reg = <0 0x0ade0000 0 0x20000>;
wakeup-parent = <&pdc>;
+ cci0_0_default: cci0-0-default-state {
+ sda-pins {
+ pins = "gpio113";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio114";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci0_0_sleep: cci0-0-sleep-state {
+ sda-pins {
+ pins = "gpio113";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio114";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci0_1_default: cci0-1-default-state {
+ sda-pins {
+ pins = "gpio115";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio116";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci0_1_sleep: cci0-1-sleep-state {
+ sda-pins {
+ pins = "gpio115";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio116";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci1_0_default: cci1-0-default-state {
+ sda-pins {
+ pins = "gpio117";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio118";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci1_0_sleep: cci1-0-sleep-state {
+ sda-pins {
+ pins = "gpio117";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio118";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci1_1_default: cci1-1-default-state {
+ sda-pins {
+ pins = "gpio12";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio13";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci1_1_sleep: cci1-1-sleep-state {
+ sda-pins {
+ pins = "gpio12";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio13";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci2_0_default: cci2-0-default-state {
+ sda-pins {
+ pins = "gpio112";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio153";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci2_0_sleep: cci2-0-sleep-state {
+ sda-pins {
+ pins = "gpio112";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio153";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci2_1_default: cci2-1-default-state {
+ sda-pins {
+ pins = "gpio119";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ scl-pins {
+ pins = "gpio120";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+ };
+
+ cci2_1_sleep: cci2-1-sleep-state {
+ sda-pins {
+ pins = "gpio119";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio120";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
hub_i2c0_data_clk: hub-i2c0-data-clk-state {
/* SDA, SCL */
pins = "gpio64", "gpio65";
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+ model = "Lenovo ThinkPad T14s Gen 6";
+ compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100";
+ chassis-type = "laptop";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-names = "default";
+
+ switch-lid {
+ gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+ <&tlmm 123 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Display-adjacent port */
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+ };
+ };
+
+ /* User-adjacent port */
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss1_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+ };
+ };
+ };
+
+ reserved-memory {
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_NVME_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn";
+ };
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* ELAN06E2 or ELAN06E3 */
+ touchpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&tpad_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+
+ /* TODO: second-sourced SYNA8022 or SYNA8024 touchpad @ 0x2c */
+
+ /* ELAN06F1 or SYNA06F2 */
+ keyboard@3a {
+ compatible = "hid-over-i2c";
+ reg = <0x3a>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&kybd_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* ILIT2911 or GTCH1563 */
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&ts0_default>;
+ pinctrl-names = "default";
+ };
+
+ /* TODO: second-sourced touchscreen @ 0x41 */
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp3 {
+ compatible = "qcom,x1e80100-dp";
+ /delete-property/ #sound-dai-cells;
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vreg_edp_3p3>;
+
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ mdss_dp3_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie6a {
+ perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-0 = <&pcie6a_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l1d_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pmc8380_3_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <1>;
+ input-disable;
+ output-enable;
+ };
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1e80100/LENOVO/21N1/qcadsp8380.mbn",
+ "qcom/x1e80100/LENOVO/21N1/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1e80100/LENOVO/21N1/qccdsp8380.mbn",
+ "qcom/x1e80100/LENOVO/21N1/cdsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <34 2>, /* Unused */
+ <44 4>, /* SPI (TPM) */
+ <72 2>, /* Secure EC I2C connection (?) */
+ <238 1>; /* UFS Reset */
+
+ tpad_default: tpad-default-state {
+ pins = "gpio3";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ ts0_default: ts0-default-state {
+ reset-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ output-high;
+ drive-strength = <16>;
+ };
+
+ int-n-pins {
+ pins = "gpio51";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ kybd_default: kybd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ bias-disable;
+ };
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ hall_int_n_default: hall-int-n-state {
+ pins = "gpio92";
+ function = "gpio";
+ bias-disable;
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6a_default: pcie6a-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie6a_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio191";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_0_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p8>;
+
+ status = "okay";
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_1_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
pinctrl-0 = <&nvme_reg_en>;
pinctrl-names = "default";
+
+ regulator-boot-on;
};
};
vdd3-supply = <&vreg_l14b_3p0>;
};
-&smb2360_2 {
- status = "disabled";
-};
-
&tlmm {
gpio-reserved-ranges = <34 2>, /* Unused */
<44 4>, /* SPI (TPM) */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "x1e80100.dtsi"
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-names = "default";
+
+ switch-lid {
+ gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
pmic-glink {
compatible = "qcom,x1e80100-pmic-glink",
"qcom,sm8550-pmic-glink",
compatible = "qcom,x1e80100-sndcard";
model = "X1E80100-CRD";
audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
- "TwitterLeft IN", "WSA WSA_SPK2 OUT",
+ "TweeterLeft IN", "WSA WSA_SPK2 OUT",
"WooferRight IN", "WSA2 WSA_SPK2 OUT",
- "TwitterRight IN", "WSA2 WSA_SPK2 OUT",
+ "TweeterRight IN", "WSA2 WSA_SPK2 OUT",
"IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"AMIC2", "MIC BIAS2",
pinctrl-names = "default";
pinctrl-0 = <&nvme_reg_en>;
+
+ regulator-boot-on;
+ };
+
+ vreg_wwan: regulator-wwan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDX_VPH_PWR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wwan_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
};
};
status = "okay";
};
+&pcie5 {
+ perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_wwan>;
+
+ pinctrl-0 = <&pcie5_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie5_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
&pcie6a {
perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
vdd3-supply = <&vreg_l14b_3p0>;
};
+&smb2360_2 {
+ status = "okay";
+};
+
&smb2360_2_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l8b_3p0>;
sound-name-prefix = "WooferLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
};
/* WSA8845, Left Tweeter */
reg = <0 1>;
reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
- sound-name-prefix = "TwitterLeft";
+ sound-name-prefix = "TweeterLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
};
};
sound-name-prefix = "WooferRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
};
/* WSA8845, Right Tweeter */
reg = <0 1>;
reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
- sound-name-prefix = "TwitterRight";
+ sound-name-prefix = "TweeterRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
};
};
bias-disable;
};
+ hall_int_n_default: hall-int-n-state {
+ pins = "gpio92";
+ function = "gpio";
+ bias-disable;
+ };
+
kybd_default: kybd-default-state {
pins = "gpio67";
function = "gpio";
};
};
+ pcie5_default: pcie5-default-state {
+ clkreq-n-pins {
+ pins = "gpio150";
+ function = "pcie5_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio149";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio151";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
pcie6a_default: pcie6a-default-state {
clkreq-n-pins {
pins = "gpio153";
bias-disable;
output-low;
};
+
+ wwan_sw_en: wwan-sw-en-state {
+ pins = "gpio221";
+ function = "gpio";
+ drive-strength = <4>;
+ bias-disable;
+ };
};
&uart21 {
pinctrl-0 = <&edp_reg_en>;
pinctrl-names = "default";
- regulator-always-on;
regulator-boot-on;
};
pinctrl-0 = <&nvme_reg_en>;
pinctrl-names = "default";
+
+ regulator-boot-on;
};
};
aux-bus {
panel {
- compatible = "edp-panel";
+ compatible = "samsung,atna45dc02", "samsung,atna33xc20";
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
power-supply = <&vreg_edp_3p3>;
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+
port {
edp_panel_in: endpoint {
remote-endpoint = <&mdss_dp3_out>;
status = "okay";
};
+&pmc8380_3_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <0>;
+ input-disable;
+ output-enable;
+ };
+};
+
&qupv3_0 {
status = "okay";
};
vdd3-supply = <&vreg_l14b_3p0>;
};
+&smb2360_2 {
+ status = "okay";
+};
+
&smb2360_2_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l8b_3p0>;
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart2;
+ i2c0 = &i2c0;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c7 = &i2c7;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pmk8550_pwm 0 5000000>;
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+ /* TODO: power-supply? */
+
+ pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+ pinctrl-names = "default";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_indicator_en>;
+
+ led-camera-indicator {
+ label = "white:camera-indicator";
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&tlmm 225 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ /* Reuse as a panic indicator until we get a "camera on" trigger */
+ panic-indicator;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+ <&tlmm 123 GPIO_ACTIVE_HIGH>;
+
+ /* Left-side rear port */
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+ };
+ };
+
+ /* Left-side front port */
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss1_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+ };
+ };
+ };
+
+ reserved-memory {
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_NVME_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j>;
+ vdd-l15-supply = <&vreg_s4c>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b: ldo1 {
+ regulator-name = "vreg_l1b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b: ldo2 {
+ regulator-name = "vreg_l2b";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b: ldo4 {
+ regulator-name = "vreg_l4b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b: ldo5 {
+ regulator-name = "vreg_l5b";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b: ldo6 {
+ regulator-name = "vreg_l6b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b: ldo7 {
+ regulator-name = "vreg_l7b";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b: ldo8 {
+ regulator-name = "vreg_l8b";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b: ldo9 {
+ regulator-name = "vreg_l9b";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b: ldo10 {
+ regulator-name = "vreg_l10b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b: ldo12 {
+ regulator-name = "vreg_l12b";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b: ldo13 {
+ regulator-name = "vreg_l13b";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b: ldo14 {
+ regulator-name = "vreg_l14b";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b: ldo15 {
+ regulator-name = "vreg_l15b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b: ldo16 {
+ regulator-name = "vreg_l16b";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b: ldo17 {
+ regulator-name = "vreg_l17b";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j>;
+ vdd-l2-supply = <&vreg_s1f>;
+ vdd-l3-supply = <&vreg_s1f>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c: smps4 {
+ regulator-name = "vreg_s4c";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c: ldo3 {
+ regulator-name = "vreg_l3c";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f>;
+ vdd-l2-supply = <&vreg_s1f>;
+ vdd-l3-supply = <&vreg_s4c>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d: ldo1 {
+ regulator-name = "vreg_l1d";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d: ldo2 {
+ regulator-name = "vreg_l2d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d: ldo3 {
+ regulator-name = "vreg_l3d";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f>;
+ vdd-l3-supply = <&vreg_s5j>;
+
+ vreg_l2e: ldo2 {
+ regulator-name = "vreg_l2e";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e: ldo3 {
+ regulator-name = "vreg_l3e";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j>;
+ vdd-l2-supply = <&vreg_s5j>;
+ vdd-l3-supply = <&vreg_s5j>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f: smps1 {
+ regulator-name = "vreg_s1f";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f: ldo1 {
+ regulator-name = "vreg_l1f";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f: ldo2 {
+ regulator-name = "vreg_l2f";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f: ldo3 {
+ regulator-name = "vreg_l3f";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c>;
+ vdd-l2-supply = <&vreg_s5j>;
+ vdd-l3-supply = <&vreg_s1f>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_s1i: smps1 {
+ regulator-name = "vreg_s1i";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i: smps2 {
+ regulator-name = "vreg_s2i";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i: ldo1 {
+ regulator-name = "vreg_l1i";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i: ldo2 {
+ regulator-name = "vreg_l2i";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i: ldo3 {
+ regulator-name = "vreg_l3i";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f>;
+ vdd-l2-supply = <&vreg_s5j>;
+ vdd-l3-supply = <&vreg_s1f>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j: smps5 {
+ regulator-name = "vreg_s5j";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j: ldo1 {
+ regulator-name = "vreg_l1j";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j: ldo2 {
+ regulator-name = "vreg_l2j";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j: ldo3 {
+ regulator-name = "vreg_l3j";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ memory-region = <&gpu_microcode_mem>;
+ firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn";
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ /* Something @39, @3e, @44 */
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* PS8830 USB retimer @8 */
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* Something @18, @2c, @2e */
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* Something @4f */
+};
+
+&i2c7 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* PS8830 USB retimer @8 */
+};
+
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp3 {
+ compatible = "qcom,x1e80100-dp";
+ /delete-property/ #sound-dai-cells;
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+
+ backlight = <&backlight>;
+ power-supply = <&vreg_edp_3p3>;
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ mdss_dp3_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j>;
+ vdda-pll-supply = <&vreg_l2j>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3i>;
+ vdda-pll-supply = <&vreg_l3e>;
+
+ status = "okay";
+};
+
+&pcie6a {
+ perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-0 = <&pcie6a_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l1d>;
+ vdda-pll-supply = <&vreg_l2j>;
+
+ status = "okay";
+};
+
+&pmc8380_3_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ input-disable;
+ output-enable;
+ };
+};
+
+&pmk8550_pwm {
+ status = "okay";
+};
+
+&pmk8550_gpios {
+ edp_bl_pwm: edp-bl-pwm-state {
+ pins = "gpio5";
+ function = "func3";
+ };
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1e80100/microsoft/Romulus/qcadsp8380.mbn",
+ "qcom/x1e80100/microsoft/Romulus/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1e80100/microsoft/Romulus/qccdsp8380.mbn",
+ "qcom/x1e80100/microsoft/Romulus/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d>;
+ vdd3-supply = <&vreg_l2b>;
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d>;
+ vdd3-supply = <&vreg_l14b>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <44 4>, /* SPI (TPM) */
+ <238 1>; /* UFS Reset */
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ ssam_state: ssam-state-state {
+ pins = "gpio91";
+ function = "gpio";
+ bias-disable;
+ };
+
+ pcie6a_default: pcie6a-default-state {
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie6a_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cam_indicator_en: cam-indicator-en-state {
+ pins = "gpio225";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&uart2 {
+ status = "okay";
+
+ embedded-controller {
+ compatible = "microsoft,surface-sam";
+
+ interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>;
+
+ current-speed = <4000000>;
+
+ pinctrl-0 = <&ssam_state>;
+ pinctrl-names = "default";
+ };
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3j>;
+ vdda12-supply = <&vreg_l2j>;
+
+ phys = <&smb2360_0_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l3e>;
+ vdda-pll-supply = <&vreg_l1j>;
+
+ status = "okay";
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3j>;
+ vdda12-supply = <&vreg_l2j>;
+
+ phys = <&smb2360_1_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l3e>;
+ vdda-pll-supply = <&vreg_l2d>;
+
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "x1e80100-microsoft-romulus.dtsi"
+
+/ {
+ model = "Microsoft Surface Laptop 7 (13.8 inch)";
+ compatible = "microsoft,romulus13", "qcom,x1e80100";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "x1e80100-microsoft-romulus.dtsi"
+
+/ {
+ model = "Microsoft Surface Laptop 7 (15 inch)";
+ compatible = "microsoft,romulus15", "qcom,x1e80100";
+};
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pmk8550_pwm: pwm {
+ compatible = "qcom,pmk8550-pwm";
+
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
};
/* PMC8380C */
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
+
smb2360_2_eusb2_repeater: phy@fd00 {
compatible = "qcom,smb2360-eusb2-repeater";
reg = <0xfd00>;
pinctrl-names = "default";
pinctrl-0 = <&nvme_reg_en>;
+
+ regulator-boot-on;
};
};
status = "okay";
};
-&smb2360_3 {
- status = "okay";
-};
-
&smb2360_0_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l2b_3p0>;
vdd3-supply = <&vreg_l14b_3p0>;
};
+&smb2360_2 {
+ status = "okay";
+};
+
&smb2360_2_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l8b_3p0>;
};
+&smb2360_3 {
+ status = "okay";
+};
+
&swr0 {
pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
pinctrl-names = "default";
sound-name-prefix = "SpkrLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
};
/* WSA8845, Right Speaker */
sound-name-prefix = "SpkrRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
};
};
*/
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
#include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
#include <dt-bindings/clock/qcom,x1e80100-gpucc.h>
<&sleep_clk>,
<0>,
<&pcie4_phy>,
- <0>,
+ <&pcie5_phy>,
<&pcie6a_phy>,
<0>,
<&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
i2c0: i2c@b80000 {
compatible = "qcom,geni-i2c";
- reg = <0 0xb80000 0 0x4000>;
+ reg = <0 0x00b80000 0 0x4000>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ uart2: serial@b88000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00b88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart2_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
spi2: spi@b88000 {
compatible = "qcom,geni-spi";
- reg = <0 0xb88000 0 0x4000>;
+ reg = <0 0x00b88000 0 0x4000>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
i2c4: i2c@b90000 {
compatible = "qcom,geni-i2c";
- reg = <0 0xb90000 0 0x4000>;
+ reg = <0 0x00b90000 0 0x4000>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
#phy-cells = <1>;
+ orientation-switch;
+
status = "disabled";
ports {
#clock-cells = <1>;
#phy-cells = <1>;
+ orientation-switch;
+
status = "disabled";
ports {
#clock-cells = <1>;
#phy-cells = <1>;
+ orientation-switch;
+
status = "disabled";
ports {
cnoc_main: interconnect@1500000 {
compatible = "qcom,x1e80100-cnoc-main";
- reg = <0 0x1500000 0 0x14400>;
+ reg = <0 0x01500000 0 0x14400>;
qcom,bcm-voters = <&apps_bcm_voter>;
config_noc: interconnect@1600000 {
compatible = "qcom,x1e80100-cnoc-cfg";
- reg = <0 0x1600000 0 0x6600>;
+ reg = <0 0x01600000 0 0x6600>;
qcom,bcm-voters = <&apps_bcm_voter>;
system_noc: interconnect@1680000 {
compatible = "qcom,x1e80100-system-noc";
- reg = <0 0x1680000 0 0x1c080>;
+ reg = <0 0x01680000 0 0x1c080>;
qcom,bcm-voters = <&apps_bcm_voter>;
pcie_south_anoc: interconnect@16c0000 {
compatible = "qcom,x1e80100-pcie-south-anoc";
- reg = <0 0x16c0000 0 0xd080>;
+ reg = <0 0x016c0000 0 0xd080>;
qcom,bcm-voters = <&apps_bcm_voter>;
pcie_center_anoc: interconnect@16d0000 {
compatible = "qcom,x1e80100-pcie-center-anoc";
- reg = <0 0x16d0000 0 0x7000>;
+ reg = <0 0x016d0000 0 0x7000>;
qcom,bcm-voters = <&apps_bcm_voter>;
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,x1e80100-aggre1-noc";
- reg = <0 0x16E0000 0 0x14400>;
+ reg = <0 0x016e0000 0 0x14400>;
qcom,bcm-voters = <&apps_bcm_voter>;
aggre2_noc: interconnect@1700000 {
compatible = "qcom,x1e80100-aggre2-noc";
- reg = <0 0x1700000 0 0x1c400>;
+ reg = <0 0x01700000 0 0x1c400>;
qcom,bcm-voters = <&apps_bcm_voter>;
pcie_north_anoc: interconnect@1740000 {
compatible = "qcom,x1e80100-pcie-north-anoc";
- reg = <0 0x1740000 0 0x9080>;
+ reg = <0 0x01740000 0 0x9080>;
qcom,bcm-voters = <&apps_bcm_voter>;
usb_center_anoc: interconnect@1750000 {
compatible = "qcom,x1e80100-usb-center-anoc";
- reg = <0 0x1750000 0 0x8800>;
+ reg = <0 0x01750000 0 0x8800>;
qcom,bcm-voters = <&apps_bcm_voter>;
usb_north_anoc: interconnect@1760000 {
compatible = "qcom,x1e80100-usb-north-anoc";
- reg = <0 0x1760000 0 0x7080>;
+ reg = <0 0x01760000 0 0x7080>;
qcom,bcm-voters = <&apps_bcm_voter>;
usb_south_anoc: interconnect@1770000 {
compatible = "qcom,x1e80100-usb-south-anoc";
- reg = <0 0x1770000 0 0xf080>;
+ reg = <0 0x01770000 0 0xf080>;
qcom,bcm-voters = <&apps_bcm_voter>;
mmss_noc: interconnect@1780000 {
compatible = "qcom,x1e80100-mmss-noc";
- reg = <0 0x1780000 0 0x5B800>;
+ reg = <0 0x01780000 0 0x5B800>;
qcom,bcm-voters = <&apps_bcm_voter>;
"mhi";
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,
- <0x02000000 0 0x70300000 0 0x70300000 0 0x3d00000>;
- bus-range = <0 0xff>;
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>,
+ <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x1d00000>;
+ bus-range = <0x00 0xff>;
dma-coherent;
linux,pci-domain = <6>;
- num-lanes = <2>;
+ num-lanes = <4>;
interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
};
pcie6a_phy: phy@1bfc000 {
- compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy";
- reg = <0 0x01bfc000 0 0x2000>;
+ compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy";
+ reg = <0 0x01bfc000 0 0x2000>,
+ <0 0x01bfe000 0 0x2000>;
clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>,
<&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
+ <&tcsr TCSR_PCIE_4L_CLKREF_EN>,
<&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>,
- <&gcc GCC_PCIE_6A_PIPE_CLK>;
+ <&gcc GCC_PCIE_6A_PIPE_CLK>,
+ <&gcc GCC_PCIE_6A_PIPEDIV2_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"rchng",
- "pipe";
+ "pipe",
+ "pipediv2";
resets = <&gcc GCC_PCIE_6A_PHY_BCR>,
<&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>;
power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>;
+ qcom,4ln-config-sel = <&tcsr 0x1a000 0>;
+
#clock-cells = <0>;
clock-output-names = "pcie6a_pipe_clk";
status = "disabled";
};
+ pcie5: pci@1c00000 {
+ device_type = "pci";
+ compatible = "qcom,pcie-x1e80100";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x7e000000 0 0xf1d>,
+ <0 0x7e000f40 0 0xa8>,
+ <0 0x7e001000 0 0x1000>,
+ <0 0x7e100000 0 0x100000>,
+ <0 0x01c03000 0 0x1000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config",
+ "mhi";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x7e200000 0x0 0x100000>,
+ <0x02000000 0x0 0x7e300000 0x0 0x7e300000 0x0 0x1d00000>;
+ bus-range = <0x00 0xff>;
+
+ dma-coherent;
+
+ linux,pci-domain = <5>;
+ num-lanes = <2>;
+
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 71 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 72 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 73 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
+ <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_5_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_5_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_5_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+ <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "noc_aggr",
+ "cnoc_sf_axi";
+
+ assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ interconnects = <&pcie_north_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "pcie-mem",
+ "cpu-pcie";
+
+ resets = <&gcc GCC_PCIE_5_BCR>,
+ <&gcc GCC_PCIE_5_LINK_DOWN_BCR>;
+ reset-names = "pci",
+ "link_down";
+
+ power-domains = <&gcc GCC_PCIE_5_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ phys = <&pcie5_phy>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
+
+ pcie5_phy: phy@1c06000 {
+ compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy";
+ reg = <0 0x01c06000 0 0x2000>;
+
+ clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
+ <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
+ <&tcsr TCSR_PCIE_2L_5_CLKREF_EN>,
+ <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_5_PIPE_CLK>,
+ <&gcc GCC_PCIE_5_PIPEDIV2_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe",
+ "pipediv2";
+
+ resets = <&gcc GCC_PCIE_5_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ power-domains = <&gcc GCC_PCIE_5_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie5_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
pcie4: pci@1c08000 {
device_type = "pci";
compatible = "qcom,pcie-x1e80100";
"mhi";
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x01000000 0 0x00000000 0 0x7c200000 0 0x100000>,
- <0x02000000 0 0x7c300000 0 0x7c300000 0 0x3d00000>;
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x7c200000 0x0 0x100000>,
+ <0x02000000 0x0 0x7c300000 0x0 0x7c300000 0x0 0x1d00000>;
bus-range = <0x00 0xff>;
dma-coherent;
assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
assigned-clock-rates = <19200000>;
- interconnects = <&pcie_south_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
+ interconnects = <&pcie_north_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
&cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>;
clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
<&gcc GCC_PCIE_4_CFG_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
+ <&tcsr TCSR_PCIE_2L_4_CLKREF_EN>,
<&gcc GCC_PCIE_4_PHY_RCHNG_CLK>,
- <&gcc GCC_PCIE_4_PIPE_CLK>;
+ <&gcc GCC_PCIE_4_PIPE_CLK>,
+ <&gcc GCC_PCIE_4_PIPEDIV2_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"rchng",
- "pipe";
+ "pipe",
+ "pipediv2";
resets = <&gcc GCC_PCIE_4_PHY_BCR>;
reset-names = "phy";
nsp_noc: interconnect@320c0000 {
compatible = "qcom,x1e80100-nsp-noc";
- reg = <0 0x320C0000 0 0xE080>;
+ reg = <0 0x320C0000 0 0xe080>;
qcom,bcm-voters = <&apps_bcm_voter>;
pinctrl-0 = <&wsa2_swr_active>;
pinctrl-names = "default";
+ resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA2_CGCR>;
+ reset-names = "swr_audio_cgcr";
qcom,din-ports = <4>;
qcom,dout-ports = <9>;
pinctrl-0 = <&rx_swr_active>;
pinctrl-names = "default";
+ resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+ reset-names = "swr_audio_cgcr";
qcom,din-ports = <1>;
qcom,dout-ports = <11>;
pinctrl-0 = <&wsa_swr_active>;
pinctrl-names = "default";
+ resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>;
+ reset-names = "swr_audio_cgcr";
qcom,din-ports = <4>;
qcom,dout-ports = <9>;
status = "disabled";
};
+ lpass_audiocc: clock-controller@6b6c000 {
+ compatible = "qcom,x1e80100-lpassaudiocc", "qcom,sc8280xp-lpassaudiocc";
+ reg = <0 0x06b6c000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
swr2: soundwire@6d30000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06d30000 0 0x10000>;
<GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "core", "wakeup";
label = "TX";
+ resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>;
+ reset-names = "swr_audio_cgcr";
pinctrl-0 = <&tx_swr_active>;
pinctrl-names = "default";
};
};
+ lpasscc: clock-controller@6ea0000 {
+ compatible = "qcom,x1e80100-lpasscc", "qcom,sc8280xp-lpasscc";
+ reg = <0 0x06ea0000 0 0x12000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
lpass_ag_noc: interconnect@7e40000 {
compatible = "qcom,x1e80100-lpass-ag-noc";
- reg = <0 0x7e40000 0 0xE080>;
+ reg = <0 0x07e40000 0 0xe080>;
qcom,bcm-voters = <&apps_bcm_voter>;
lpass_lpiaon_noc: interconnect@7400000 {
compatible = "qcom,x1e80100-lpass-lpiaon-noc";
- reg = <0 0x7400000 0 0x19080>;
+ reg = <0 0x07400000 0 0x19080>;
qcom,bcm-voters = <&apps_bcm_voter>;
lpass_lpicx_noc: interconnect@7430000 {
compatible = "qcom,x1e80100-lpass-lpicx-noc";
- reg = <0 0x7430000 0 0x3A200>;
+ reg = <0 0x07430000 0 0x3A200>;
qcom,bcm-voters = <&apps_bcm_voter>;
status = "disabled";
};
+ usb_mp_hsphy0: phy@88e1000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x088e1000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB3_MP0_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_mp_hsphy1: phy@88e2000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x088e2000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB3_MP1_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_mp_qmpphy0: phy@88e3000 {
+ compatible = "qcom,x1e80100-qmp-usb3-uni-phy";
+ reg = <0 0x088e3000 0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ power-domains = <&gcc GCC_USB3_MP_SS0_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb_mp_phy0_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_mp_qmpphy1: phy@88e5000 {
+ compatible = "qcom,x1e80100-qmp-usb3-uni-phy";
+ reg = <0 0x088e5000 0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ power-domains = <&gcc GCC_USB3_MP_SS1_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb_mp_phy1_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
usb_1_ss2: usb@a0f8800 {
compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
reg = <0 0x0a0f8800 0 0x400>;
};
};
+ usb_mp: usb@a4f8800 {
+ compatible = "qcom,x1e80100-dwc3-mp", "qcom,dwc3";
+ reg = <0 0x0a4f8800 0 0x400>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_SLEEP_CLK>,
+ <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr",
+ "noc_aggr_north",
+ "noc_aggr_south",
+ "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>;
+ assigned-clock-rates = <19200000>,
+ <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 52 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 51 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 54 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 53 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 55 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event_1", "pwr_event_2",
+ "hs_phy_1", "hs_phy_2",
+ "dp_hs_phy_1", "dm_hs_phy_1",
+ "dp_hs_phy_2", "dm_hs_phy_2",
+ "ss_phy_1", "ss_phy_2";
+
+ power-domains = <&gcc GCC_USB30_MP_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_MP_BCR>;
+
+ interconnects = <&usb_north_anoc MASTER_USB3_MP QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ wakeup-source;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ usb_mp_dwc3: usb@a400000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a400000 0 0xcd00>;
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&apps_smmu 0x1400 0x0>;
+
+ phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>,
+ <&usb_mp_hsphy1>, <&usb_mp_qmpphy1>;
+ phy-names = "usb2-0", "usb3-0",
+ "usb2-1", "usb3-1";
+ dr_mode = "host";
+
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,usb3_lpm_capable;
+
+ dma-coherent;
+ };
+ };
+
usb_1_ss0: usb@a6f8800 {
compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
mdss_dp0: displayport-controller@ae90000 {
compatible = "qcom,x1e80100-dp";
- reg = <0 0xae90000 0 0x200>,
- <0 0xae90200 0 0x200>,
- <0 0xae90400 0 0x600>,
- <0 0xae91000 0 0x400>,
- <0 0xae91400 0 0x400>;
+ reg = <0 0x0ae90000 0 0x200>,
+ <0 0x0ae90200 0 0x200>,
+ <0 0x0ae90400 0 0x600>,
+ <0 0x0ae91000 0 0x400>,
+ <0 0x0ae91400 0 0x400>;
interrupts-extended = <&mdss 12>;
mdss_dp1: displayport-controller@ae98000 {
compatible = "qcom,x1e80100-dp";
- reg = <0 0xae98000 0 0x200>,
- <0 0xae98200 0 0x200>,
- <0 0xae98400 0 0x600>,
- <0 0xae99000 0 0x400>,
- <0 0xae99400 0 0x400>;
+ reg = <0 0x0ae98000 0 0x200>,
+ <0 0x0ae98200 0 0x200>,
+ <0 0x0ae98400 0 0x600>,
+ <0 0x0ae99000 0 0x400>,
+ <0 0x0ae99400 0 0x400>;
interrupts-extended = <&mdss 13>;
mdss_dp2: displayport-controller@ae9a000 {
compatible = "qcom,x1e80100-dp";
- reg = <0 0xae9a000 0 0x200>,
- <0 0xae9a200 0 0x200>,
- <0 0xae9a400 0 0x600>,
- <0 0xae9b000 0 0x400>,
- <0 0xae9b400 0 0x400>;
+ reg = <0 0x0ae9a000 0 0x200>,
+ <0 0x0ae9a200 0 0x200>,
+ <0 0x0ae9a400 0 0x600>,
+ <0 0x0ae9b000 0 0x400>,
+ <0 0x0ae9b400 0 0x400>;
interrupts-extended = <&mdss 14>;
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
- assigned-clock-parents = <&mdss_dp2_phy 0>,
- <&mdss_dp2_phy 1>;
+ assigned-clock-parents = <&usb_1_ss2_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
operating-points-v2 = <&mdss_dp2_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
- phys = <&mdss_dp2_phy>;
+ phys = <&usb_1_ss2_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
#sound-dai-cells = <0>;
mdss_dp3: displayport-controller@aea0000 {
compatible = "qcom,x1e80100-dp";
- reg = <0 0xaea0000 0 0x200>,
- <0 0xaea0200 0 0x200>,
- <0 0xaea0400 0 0x600>,
- <0 0xaea1000 0 0x400>,
- <0 0xaea1400 0 0x400>;
+ reg = <0 0x0aea0000 0 0x200>,
+ <0 0x0aea0200 0 0x200>,
+ <0 0x0aea0400 0 0x600>,
+ <0 0x0aea1000 0 0x400>,
+ <0 0x0aea1400 0 0x400>;
interrupts-extended = <&mdss 15>;
<&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp1 */
<&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
- <&mdss_dp2_phy 0>, /* dp2 */
- <&mdss_dp2_phy 1>,
+ <&usb_1_ss2_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp2 */
+ <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&mdss_dp3_phy 0>, /* dp3 */
<&mdss_dp3_phy 1>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
#clock-cells = <0>;
};
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
spmi: arbiter@c400000 {
compatible = "qcom,x1e80100-spmi-pmic-arb";
reg = <0 0x0c400000 0 0x3000>,
bias-disable;
};
+ qup_uart2_default: qup-uart2-default-state {
+ cts-pins {
+ pins = "gpio8";
+ function = "qup0_se2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rts-pins {
+ pins = "gpio9";
+ function = "qup0_se2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tx-pins {
+ pins = "gpio10";
+ function = "qup0_se2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-pins {
+ pins = "gpio11";
+ function = "qup0_se2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
qup_uart21_default: qup-uart21-default-state {
- /* TX, RX */
- pins = "gpio86", "gpio87";
- function = "qup2_se5";
- drive-strength = <2>;
- bias-disable;
+ tx-pins {
+ pins = "gpio86";
+ function = "qup2_se5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-pins {
+ pins = "gpio87";
+ function = "qup2_se5";
+ drive-strength = <2>;
+ bias-disable;
+ };
};
};
<0 0x25a00000 0 0x200000>,
<0 0x25c00000 0 0x200000>,
<0 0x25e00000 0 0x200000>,
- <0 0x26000000 0 0x200000>;
+ <0 0x26000000 0 0x200000>,
+ <0 0x26200000 0 0x200000>;
reg-names = "llcc0_base",
"llcc1_base",
"llcc2_base",
"llcc5_base",
"llcc6_base",
"llcc7_base",
- "llcc_broadcast_base";
+ "llcc_broadcast_base",
+ "llcc_broadcast_and_base";
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 314>;
+ iommus = <&ipmmu_ds1 32>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 313>;
+ iommus = <&ipmmu_ds1 33>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 312>;
+ iommus = <&ipmmu_ds1 34>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 311>;
+ iommus = <&ipmmu_ds1 35>;
status = "disabled";
};
clocks = <&cpg CPG_MOD 615>;
power-domains = <&sysc R8A774A1_PD_A3VC>;
resets = <&cpg 615>;
+ iommus = <&ipmmu_vc0 16>;
};
fcpvb0: fcp@fe96f000 {
clocks = <&cpg CPG_MOD 607>;
power-domains = <&sysc R8A774A1_PD_A3VC>;
resets = <&cpg 607>;
+ iommus = <&ipmmu_vi0 5>;
};
fcpvd0: fcp@fea27000 {
resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+ <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+ <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+ <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+ <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+ <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+ <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+ <&ipmmu_mp 14>, <&ipmmu_mp 15>;
};
audma1: dma-controller@ec720000 {
resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+ <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+ <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+ <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+ <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+ <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+ <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+ <&ipmmu_mp 30>, <&ipmmu_mp 31>;
};
xhci0: usb@ee000000 {
max-frequency = <200000000>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 314>;
+ iommus = <&ipmmu_ds1 32>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 313>;
+ iommus = <&ipmmu_ds1 33>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 312>;
+ iommus = <&ipmmu_ds1 34>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 311>;
+ iommus = <&ipmmu_ds1 35>;
status = "disabled";
};
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 815>;
+ iommus = <&ipmmu_hc 2>;
status = "disabled";
};
clocks = <&cpg CPG_MOD 615>;
power-domains = <&sysc R8A774B1_PD_A3VP>;
resets = <&cpg 615>;
+ iommus = <&ipmmu_vp0 0>;
};
vspb: vsp@fe960000 {
clocks = <&cpg CPG_MOD 607>;
power-domains = <&sysc R8A774B1_PD_A3VP>;
resets = <&cpg 607>;
+ iommus = <&ipmmu_vp0 5>;
};
fcpvd0: fcp@fea27000 {
clocks = <&cpg CPG_MOD 603>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
};
fcpvd1: fcp@fea2f000 {
clocks = <&cpg CPG_MOD 602>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 602>;
+ iommus = <&ipmmu_vi0 9>;
};
fcpvi0: fcp@fe9af000 {
clocks = <&cpg CPG_MOD 611>;
power-domains = <&sysc R8A774B1_PD_A3VP>;
resets = <&cpg 611>;
+ iommus = <&ipmmu_vp0 8>;
};
csi20: csi2@fea80000 {
max-frequency = <200000000>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 314>;
+ iommus = <&ipmmu_ds1 32>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 313>;
+ iommus = <&ipmmu_ds1 33>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 311>;
+ iommus = <&ipmmu_ds1 35>;
status = "disabled";
};
clocks = <&cpg CPG_MOD 615>;
power-domains = <&sysc R8A774E1_PD_A3VP>;
resets = <&cpg 615>;
+ iommus = <&ipmmu_vp0 0>;
};
fcpf1: fcp@fe951000 {
clocks = <&cpg CPG_MOD 614>;
power-domains = <&sysc R8A774E1_PD_A3VP>;
resets = <&cpg 614>;
+ iommus = <&ipmmu_vp1 1>;
};
fcpvb0: fcp@fe96f000 {
clocks = <&cpg CPG_MOD 607>;
power-domains = <&sysc R8A774E1_PD_A3VP>;
resets = <&cpg 607>;
+ iommus = <&ipmmu_vp0 5>;
};
fcpvb1: fcp@fe92f000 {
clocks = <&cpg CPG_MOD 606>;
power-domains = <&sysc R8A774E1_PD_A3VP>;
resets = <&cpg 606>;
+ iommus = <&ipmmu_vp1 7>;
};
fcpvi0: fcp@fe9af000 {
clocks = <&cpg CPG_MOD 611>;
power-domains = <&sysc R8A774E1_PD_A3VP>;
resets = <&cpg 611>;
+ iommus = <&ipmmu_vp0 8>;
};
fcpvi1: fcp@fe9bf000 {
clocks = <&cpg CPG_MOD 610>;
power-domains = <&sysc R8A774E1_PD_A3VP>;
resets = <&cpg 610>;
+ iommus = <&ipmmu_vp1 9>;
};
fcpvd0: fcp@fea27000 {
clocks = <&cpg CPG_MOD 603>;
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
};
fcpvd1: fcp@fea2f000 {
clocks = <&cpg CPG_MOD 602>;
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 602>;
+ iommus = <&ipmmu_vi0 9>;
};
csi20: csi2@fea80000 {
clocks = <&cpg CPG_MOD 615>;
power-domains = <&sysc R8A7796_PD_A3VC>;
resets = <&cpg 615>;
+ iommus = <&ipmmu_vc0 16>;
};
fcpvb0: fcp@fe96f000 {
clocks = <&cpg CPG_MOD 607>;
power-domains = <&sysc R8A7796_PD_A3VC>;
resets = <&cpg 607>;
+ iommus = <&ipmmu_vi0 5>;
};
fcpvi0: fcp@fe9af000 {
clocks = <&cpg CPG_MOD 615>;
power-domains = <&sysc R8A77961_PD_A3VC>;
resets = <&cpg 615>;
+ iommus = <&ipmmu_vc0 16>;
};
fcpvb0: fcp@fe96f000 {
clocks = <&cpg CPG_MOD 607>;
power-domains = <&sysc R8A77961_PD_A3VC>;
resets = <&cpg 607>;
+ iommus = <&ipmmu_vi0 5>;
};
fcpvi0: fcp@fe9af000 {
resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+ <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+ <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+ <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+ <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+ <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+ <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+ <&ipmmu_mp 14>, <&ipmmu_mp 15>;
};
audma1: dma-controller@ec720000 {
resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+ <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+ <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+ <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+ <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+ <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+ <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+ <&ipmmu_mp 30>, <&ipmmu_mp 31>;
};
xhci0: usb@ee000000 {
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 815>;
+ iommus = <&ipmmu_hc 2>;
status = "disabled";
};
clocks = <&cpg CPG_MOD 615>;
power-domains = <&sysc R8A77965_PD_A3VP>;
resets = <&cpg 615>;
+ iommus = <&ipmmu_vp0 0>;
};
vspb: vsp@fe960000 {
clocks = <&cpg CPG_MOD 607>;
power-domains = <&sysc R8A77965_PD_A3VP>;
resets = <&cpg 607>;
+ iommus = <&ipmmu_vp0 5>;
};
fcpvd0: fcp@fea27000 {
clocks = <&cpg CPG_MOD 603>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
};
fcpvd1: fcp@fea2f000 {
clocks = <&cpg CPG_MOD 602>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 602>;
+ iommus = <&ipmmu_vi0 9>;
};
fcpvi0: fcp@fe9af000 {
clocks = <&cpg CPG_MOD 611>;
power-domains = <&sysc R8A77965_PD_A3VP>;
resets = <&cpg 611>;
+ iommus = <&ipmmu_vp0 8>;
};
cmm0: cmm@fea40000 {
clocks = <&cpg CPG_MOD 603>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
};
csi40: csi2@feaa0000 {
clocks = <&cpg CPG_MOD 813>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 813>;
+ iommus = <&ipmmu_ds1 34>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clocks = <&cpg CPG_MOD 603>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
};
csi40: csi2@feaa0000 {
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_ds1 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_ds1 1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_ds1 2>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_ds1 3>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_ds1 4>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_ds1 11>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
vin00: video@e6ef0000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 730>;
};
vin01: video@e6ef1000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 731>;
};
vin02: video@e6ef2000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 800>;
};
vin03: video@e6ef3000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 801>;
};
vin04: video@e6ef4000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef4000 0 0x1000>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 802>;
};
vin05: video@e6ef5000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef5000 0 0x1000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 803>;
};
vin06: video@e6ef6000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef6000 0 0x1000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 804>;
};
vin07: video@e6ef7000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef7000 0 0x1000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 805>;
};
vin08: video@e6ef8000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef8000 0 0x1000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 806>;
};
vin09: video@e6ef9000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef9000 0 0x1000>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 807>;
};
vin10: video@e6efa000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efa000 0 0x1000>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 808>;
};
vin11: video@e6efb000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efb000 0 0x1000>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 809>;
};
vin12: video@e6efc000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efc000 0 0x1000>;
interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 810>;
};
vin13: video@e6efd000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efd000 0 0x1000>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 811>;
};
vin14: video@e6efe000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efe000 0 0x1000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
};
vin15: video@e6eff000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6eff000 0 0x1000>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 813>;
};
vin16: video@e6ed0000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ed0000 0 0x1000>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 814>;
};
vin17: video@e6ed1000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ed1000 0 0x1000>;
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
};
vin18: video@e6ed2000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ed2000 0 0x1000>;
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 816>;
};
vin19: video@e6ed3000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ed3000 0 0x1000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 817>;
};
vin20: video@e6ed4000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ed4000 0 0x1000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 818>;
};
vin21: video@e6ed5000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ed5000 0 0x1000>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 819>;
};
vin22: video@e6ed6000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ed6000 0 0x1000>;
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 820>;
};
vin23: video@e6ed7000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ed7000 0 0x1000>;
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 821>;
};
vin24: video@e6ed8000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ed8000 0 0x1000>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 822>;
};
vin25: video@e6ed9000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ed9000 0 0x1000>;
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 823>;
};
vin26: video@e6eda000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6eda000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 824>;
};
vin27: video@e6edb000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6edb000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 825>;
};
vin28: video@e6edc000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6edc000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 826>;
};
vin29: video@e6edd000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6edd000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 827>;
};
vin30: video@e6ede000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ede000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 828>;
};
vin31: video@e6edf000 {
- compatible = "renesas,vin-r8a779a0";
+ compatible = "renesas,vin-r8a779a0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6edf000 0 0x1000>;
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 829>;
resets = <&cpg 709>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
};
dmac2: dma-controller@e7351000 {
resets = <&cpg 710>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>,
+ <&ipmmu_ds0 18>, <&ipmmu_ds0 19>,
+ <&ipmmu_ds0 20>, <&ipmmu_ds0 21>,
+ <&ipmmu_ds0 22>, <&ipmmu_ds0 23>;
};
mmc0: mmc@ee140000 {
clocks = <&cpg CPG_MOD 508>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 508>;
+ iommus = <&ipmmu_vi1 6>;
};
fcpvd1: fcp@fea11000 {
clocks = <&cpg CPG_MOD 509>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 509>;
+ iommus = <&ipmmu_vi1 7>;
};
vspd0: vsp@fea20000 {
};
isp0: isp@fed00000 {
- compatible = "renesas,r8a779a0-isp";
+ compatible = "renesas,r8a779a0-isp",
+ "renesas,rcar-gen4-isp";
reg = <0 0xfed00000 0 0x10000>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 612>;
};
isp1: isp@fed20000 {
- compatible = "renesas,r8a779a0-isp";
+ compatible = "renesas,r8a779a0-isp",
+ "renesas,rcar-gen4-isp";
reg = <0 0xfed20000 0 0x10000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 613>;
};
isp2: isp@fed30000 {
- compatible = "renesas,r8a779a0-isp";
+ compatible = "renesas,r8a779a0-isp",
+ "renesas,rcar-gen4-isp";
reg = <0 0xfed30000 0 0x10000>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 614>;
};
isp3: isp@fed40000 {
- compatible = "renesas,r8a779a0-isp";
+ compatible = "renesas,r8a779a0-isp",
+ "renesas,rcar-gen4-isp";
reg = <0 0xfed40000 0 0x10000>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 615>;
clock-frequency = <0>;
};
+ pcie0_clkref: pcie0-clkref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ pcie1_clkref: pcie1-clkref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
pmu_a76 {
compatible = "arm,cortex-a76-pmu";
interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
};
+ tsn0: ethernet@e6460000 {
+ compatible = "renesas,r8a779g0-ethertsn", "renesas,rcar-gen4-ethertsn";
+ reg = <0 0xe6460000 0 0x7000>,
+ <0 0xe6449000 0 0x500>;
+ reg-names = "tsnes", "gptp";
+ interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ clocks = <&cpg CPG_MOD 2723>;
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 2723>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a779g0",
"renesas,rcar-gen4-i2c";
status = "disabled";
};
+ pciec0: pcie@e65d0000 {
+ compatible = "renesas,r8a779g0-pcie",
+ "renesas,rcar-gen4-pcie";
+ reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>,
+ <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
+ <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>,
+ <0 0xfe000000 0 0x400000>;
+ reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config";
+ interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi", "dma", "sft_ce", "app";
+ clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>;
+ clock-names = "core", "ref";
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 624>;
+ reset-names = "pwr";
+ max-link-speed = <4>;
+ num-lanes = <2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>;
+ dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
+ snps,enable-cdm-check;
+ status = "disabled";
+ };
+
+ pciec1: pcie@e65d8000 {
+ compatible = "renesas,r8a779g0-pcie",
+ "renesas,rcar-gen4-pcie";
+ reg = <0 0xe65d8000 0 0x1000>, <0 0xe65da000 0 0x0800>,
+ <0 0xe65db000 0 0x2000>, <0 0xe65dd000 0 0x1200>,
+ <0 0xe65de200 0 0x0e00>, <0 0xe65df000 0 0x0400>,
+ <0 0xee900000 0 0x400000>;
+ reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config";
+ interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi", "dma", "sft_ce", "app";
+ clocks = <&cpg CPG_MOD 625>, <&pcie1_clkref>;
+ clock-names = "core", "ref";
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 625>;
+ reset-names = "pwr";
+ max-link-speed = <4>;
+ num-lanes = <2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00400000>,
+ <0x02000000 0 0xc0000000 0 0xc0000000 0 0x10000000>;
+ dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+ snps,enable-cdm-check;
+ status = "disabled";
+ };
+
+ pciec0_ep: pcie-ep@e65d0000 {
+ compatible = "renesas,r8a779g0-pcie-ep",
+ "renesas,rcar-gen4-pcie-ep";
+ reg = <0 0xe65d0000 0 0x2000>, <0 0xe65d2000 0 0x1000>,
+ <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
+ <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>,
+ <0 0xfe000000 0 0x400000>;
+ reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space";
+ interrupts = <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma", "sft_ce", "app";
+ clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>;
+ clock-names = "core", "ref";
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 624>;
+ reset-names = "pwr";
+ max-link-speed = <4>;
+ num-lanes = <2>;
+ max-functions = /bits/ 8 <2>;
+ status = "disabled";
+ };
+
+ pciec1_ep: pcie-ep@e65d8000 {
+ compatible = "renesas,r8a779g0-pcie-ep",
+ "renesas,rcar-gen4-pcie-ep";
+ reg = <0 0xe65d8000 0 0x2000>, <0 0xe65da000 0 0x1000>,
+ <0 0xe65db000 0 0x2000>, <0 0xe65dd000 0 0x1200>,
+ <0 0xe65de200 0 0x0e00>, <0 0xe65df000 0 0x0400>,
+ <0 0xee900000 0 0x400000>;
+ reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space";
+ interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma", "sft_ce", "app";
+ clocks = <&cpg CPG_MOD 625>, <&pcie1_clkref>;
+ clock-names = "core", "ref";
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 625>;
+ reset-names = "pwr";
+ max-link-speed = <4>;
+ num-lanes = <2>;
+ max-functions = /bits/ 8 <2>;
+ status = "disabled";
+ };
+
canfd: can@e6660000 {
compatible = "renesas,r8a779g0-canfd",
"renesas,rcar-gen4-canfd";
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_hc 0>;
status = "disabled";
};
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_hc 1>;
status = "disabled";
};
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_hc 2>;
status = "disabled";
};
};
vin00: video@e6ef0000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 730>;
};
vin01: video@e6ef1000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 731>;
};
vin02: video@e6ef2000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 800>;
};
vin03: video@e6ef3000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 801>;
};
vin04: video@e6ef4000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef4000 0 0x1000>;
interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 802>;
};
vin05: video@e6ef5000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef5000 0 0x1000>;
interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 803>;
};
vin06: video@e6ef6000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef6000 0 0x1000>;
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 804>;
};
vin07: video@e6ef7000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef7000 0 0x1000>;
interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 805>;
};
vin08: video@e6ef8000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef8000 0 0x1000>;
interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 806>;
};
vin09: video@e6ef9000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef9000 0 0x1000>;
interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 807>;
};
vin10: video@e6efa000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efa000 0 0x1000>;
interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 808>;
};
vin11: video@e6efb000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efb000 0 0x1000>;
interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 809>;
};
vin12: video@e6efc000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efc000 0 0x1000>;
interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 810>;
};
vin13: video@e6efd000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efd000 0 0x1000>;
interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 811>;
};
vin14: video@e6efe000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efe000 0 0x1000>;
interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
};
vin15: video@e6eff000 {
- compatible = "renesas,vin-r8a779g0";
+ compatible = "renesas,vin-r8a779g0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6eff000 0 0x1000>;
interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 813>;
clocks = <&cpg CPG_MOD 508>;
power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
resets = <&cpg 508>;
+ iommus = <&ipmmu_vi1 6>;
};
fcpvd1: fcp@fea11000 {
clocks = <&cpg CPG_MOD 509>;
power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
resets = <&cpg 509>;
+ iommus = <&ipmmu_vi1 7>;
};
vspd0: vsp@fea20000 {
};
isp0: isp@fed00000 {
- compatible = "renesas,r8a779g0-isp";
+ compatible = "renesas,r8a779g0-isp",
+ "renesas,rcar-gen4-isp";
reg = <0 0xfed00000 0 0x10000>;
interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>;
clocks = <&cpg CPG_MOD 612>;
};
isp1: isp@fed20000 {
- compatible = "renesas,r8a779g0-isp";
+ compatible = "renesas,r8a779g0-isp",
+ "renesas,rcar-gen4-isp";
reg = <0 0xfed20000 0 0x10000>;
interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>;
clocks = <&cpg CPG_MOD 613>;
groups = "hscif0_data", "hscif0_ctrl";
function = "hscif0";
};
+
+&pfc {
+ tsn0_pins: tsn0 {
+ mux {
+ groups = "tsn0_link", "tsn0_mdio", "tsn0_rgmii",
+ "tsn0_txcrefclk";
+ function = "tsn0";
+ };
+
+ link {
+ groups = "tsn0_link";
+ bias-disable;
+ };
+
+ mdio {
+ groups = "tsn0_mdio";
+ drive-strength = <24>;
+ bias-disable;
+ };
+
+ rgmii {
+ groups = "tsn0_rgmii";
+ drive-strength = <24>;
+ bias-disable;
+ };
+ };
+};
+
+&tsn0 {
+ pinctrl-0 = <&tsn0_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rgmii";
+ phy-handle = <&phy3>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ reset-post-delay-us = <4000>;
+
+ phy3: ethernet-phy@0 {
+ compatible = "ethernet-phy-id002b.0980",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
* Copyright (C) 2023 Renesas Electronics Corp.
* Copyright (C) 2024 Glider bv
*/
+/*
+ * [How to use Sound]
+ *
+ * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture
+ * at the same time. You need to switch the direction which is controlled
+ * by the GP0_01 pin via amixer.
+ *
+ * Playback (CN9500)
+ * > amixer set "MUX" "Playback" // for GP0_01
+ * > amixer set "DAC 1" 85%
+ * > aplay xxx.wav
+ *
+ * Capture (CN9501)
+ * > amixer set "MUX" "Capture" // for GP0_01
+ * > amixer set "Mic 1" 80%
+ * > amixer set "ADC 1" on
+ * > amixer set 'ADC 1' 80%
+ * > arecord xxx hoge.wav
+ */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "r8a779h0.dtsi"
ethernet0 = &avb0;
};
+ can_transceiver0: can-phy0 {
+ compatible = "nxp,tjr1443";
+ #phy-cells = <0>;
+ enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ max-bitrate = <5000000>;
+ };
+
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:921600n8";
};
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW47";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ key-2 {
+ gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW48";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ key-3 {
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW49";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+
+ led-2 {
+ gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+
+ led-3 {
+ gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ };
+ };
+
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
regulator-boot-on;
regulator-always-on;
};
+
+ sound_mux: sound-mux {
+ compatible = "simple-audio-mux";
+ mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ state-labels = "Playback", "Capture";
+ };
+
+ sound_card: sound {
+ compatible = "audio-graph-card2";
+ label = "rcar-sound";
+ aux-devs = <&sound_mux>; // for GP0_01
+
+ links = <&rsnd_port>; // AK4619 Audio Codec
+ };
+};
+
+&audio_clkin {
+ clock-frequency = <24576000>;
};
&avb0 {
};
};
+&can_clk {
+ clock-frequency = <40000000>;
+};
+
+&canfd {
+ pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ phys = <&can_transceiver0>;
+ };
+
+ channel1 {
+ status = "okay";
+ };
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
clock-frequency = <32768>;
};
+&gpio1 {
+ audio-power-hog {
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "Audio-Power";
+ };
+};
+
&hscif0 {
pinctrl-0 = <&hscif0_pins>;
pinctrl-names = "default";
};
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ codec@10 {
+ compatible = "asahi-kasei,ak4619";
+ reg = <0x10>;
+
+ clocks = <&rcar_sound>;
+ clock-names = "mclk";
+
+ #sound-dai-cells = <0>;
+ port {
+ ak4619_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint>;
+ };
+ };
+ };
+};
+
&mmc0 {
pinctrl-0 = <&mmc_pins>;
pinctrl-1 = <&mmc_pins>;
};
};
+ can_clk_pins: can-clk {
+ groups = "can_clk";
+ function = "can_clk";
+ };
+
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data";
+ function = "canfd0";
+ };
+
+ canfd1_pins: canfd1 {
+ groups = "canfd1_data";
+ function = "canfd1";
+ };
+
hscif0_pins: hscif0 {
groups = "hscif0_data", "hscif0_ctrl";
function = "hscif0";
function = "i2c0";
};
+ i2c3_pins: i2c3 {
+ groups = "i2c3";
+ function = "i2c3";
+ };
+
+ keys_pins: keys {
+ pins = "GP_5_0", "GP_5_1", "GP_5_2";
+ bias-pull-up;
+ };
+
mmc_pins: mmc {
groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
function = "mmc";
groups = "scif_clk2";
function = "scif_clk2";
};
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clkin", "audio_clkout";
+ function = "audio_clk";
+ };
+
+ sound_pins: sound {
+ groups = "ssi_ctrl", "ssi_data";
+ function = "ssi";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_clk_pins>, <&sound_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ /* audio_clkout */
+ clock-frequency = <12288000>;
+
+ ports {
+ rsnd_port: port {
+ rsnd_endpoint: endpoint {
+ remote-endpoint = <&ak4619_endpoint>;
+ bitclock-master;
+ frame-master;
+
+ /* see above [How to use Sound] */
+ playback = <&ssi0>;
+ capture = <&ssi0>;
+ };
+ };
+ };
};
&rpc {
clock-frequency = <0>;
};
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
status = "disabled";
};
+ canfd: can@e6660000 {
+ compatible = "renesas,r8a779h0-canfd",
+ "renesas,rcar-gen4-canfd";
+ reg = <0 0xe6660000 0 0x8500>;
+ interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
+ clocks = <&cpg CPG_MOD 328>,
+ <&cpg CPG_CORE R8A779H0_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A779H0_CLK_CANFD>;
+ assigned-clock-rates = <80000000>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+
+ channel1 {
+ status = "disabled";
+ };
+
+ channel2 {
+ status = "disabled";
+ };
+
+ channel3 {
+ status = "disabled";
+ };
+ };
+
avb0: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a779h0",
"renesas,etheravb-rcar-gen4";
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_hc 1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_hc 2>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a779h0", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 628>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 628>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a779h0", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 628>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 628>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a779h0", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 628>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 628>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a779h0", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 628>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 628>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a779h0", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 628>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 628>;
+ status = "disabled";
+ };
+
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a779h0",
"renesas,rcar-gen4-scif", "renesas,scif";
};
vin00: video@e6ef0000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 730>;
};
vin01: video@e6ef1000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 731>;
};
vin02: video@e6ef2000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 800>;
};
vin03: video@e6ef3000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 801>;
};
vin04: video@e6ef4000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef4000 0 0x1000>;
interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 802>;
};
vin05: video@e6ef5000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef5000 0 0x1000>;
interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 803>;
};
vin06: video@e6ef6000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef6000 0 0x1000>;
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 804>;
};
vin07: video@e6ef7000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef7000 0 0x1000>;
interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 805>;
};
vin08: video@e6ef8000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef8000 0 0x1000>;
interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 806>;
};
vin09: video@e6ef9000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6ef9000 0 0x1000>;
interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 807>;
};
vin10: video@e6efa000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efa000 0 0x1000>;
interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 808>;
};
vin11: video@e6efb000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efb000 0 0x1000>;
interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 809>;
};
vin12: video@e6efc000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efc000 0 0x1000>;
interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 810>;
};
vin13: video@e6efd000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efd000 0 0x1000>;
interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 811>;
};
vin14: video@e6efe000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6efe000 0 0x1000>;
interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
};
vin15: video@e6eff000 {
- compatible = "renesas,vin-r8a779h0";
+ compatible = "renesas,vin-r8a779h0",
+ "renesas,rcar-gen4-vin";
reg = <0 0xe6eff000 0 0x1000>;
interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 813>;
};
isp0: isp@fed00000 {
- compatible = "renesas,r8a779h0-isp";
+ compatible = "renesas,r8a779h0-isp",
+ "renesas,rcar-gen4-isp";
reg = <0 0xfed00000 0 0x10000>;
interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>;
clocks = <&cpg CPG_MOD 612>;
};
isp1: isp@fed20000 {
- compatible = "renesas,r8a779h0-isp";
+ compatible = "renesas,r8a779h0-isp",
+ "renesas,rcar-gen4-isp";
reg = <0 0xfed20000 0 0x10000>;
interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>;
clocks = <&cpg CPG_MOD 613>;
power-domains = <&cpg>;
#reset-cells = <1>;
status = "disabled";
+
+ usb0_vbus_otg: regulator-vbus {
+ regulator-name = "vbus";
+ };
};
ohci0: usb@11c50000 {
};
};
+ vspd: vsp@10870000 {
+ compatible = "renesas,r9a07g043u-vsp2", "renesas,r9a07g044-vsp2";
+ reg = <0 0x10870000 0 0x10000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(149) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_LCDC_CLK_A>,
+ <&cpg CPG_MOD R9A07G043_LCDC_CLK_P>,
+ <&cpg CPG_MOD R9A07G043_LCDC_CLK_D>;
+ clock-names = "aclk", "pclk", "vclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_LCDC_RESET_N>;
+ renesas,fcp = <&fcpvd>;
+ };
+
+ fcpvd: fcp@10880000 {
+ compatible = "renesas,r9a07g043u-fcpvd", "renesas,fcpv";
+ reg = <0 0x10880000 0 0x10000>;
+ clocks = <&cpg CPG_MOD R9A07G043_LCDC_CLK_A>,
+ <&cpg CPG_MOD R9A07G043_LCDC_CLK_P>,
+ <&cpg CPG_MOD R9A07G043_LCDC_CLK_D>;
+ clock-names = "aclk", "pclk", "vclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_LCDC_RESET_N>;
+ };
+
+ du: display@10890000 {
+ compatible = "renesas,r9a07g043u-du";
+ reg = <0 0x10890000 0 0x10000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(152) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_LCDC_CLK_A>,
+ <&cpg CPG_MOD R9A07G043_LCDC_CLK_P>,
+ <&cpg CPG_MOD R9A07G043_LCDC_CLK_D>;
+ clock-names = "aclk", "pclk", "vclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_LCDC_RESET_N>;
+ renesas,vsps = <&vspd 0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ };
+ };
+
irqc: interrupt-controller@110a0000 {
compatible = "renesas,r9a07g043u-irqc",
"renesas,rzg2l-irqc";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- reg = <0x0 0x11900000 0 0x40000>,
- <0x0 0x11940000 0 0x60000>;
+ reg = <0x0 0x11900000 0 0x20000>,
+ <0x0 0x11940000 0 0x40000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/G2UL SMARC EVK with ADV7513 transmitter
+ * connected to DU enabled.
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#define ADV7513_PARENT_I2C i2c1
+#include "rz-smarc-du-adv7513.dtsi"
+
+&pinctrl {
+ du_pins: du {
+ data {
+ pinmux = <RZG2L_PORT_PINMUX(11, 2, 6)>,
+ <RZG2L_PORT_PINMUX(13, 1, 6)>,
+ <RZG2L_PORT_PINMUX(13, 0, 6)>,
+ <RZG2L_PORT_PINMUX(13, 4, 6)>,
+ <RZG2L_PORT_PINMUX(13, 3, 6)>,
+ <RZG2L_PORT_PINMUX(12, 1, 6)>,
+ <RZG2L_PORT_PINMUX(13, 2, 6)>,
+ <RZG2L_PORT_PINMUX(14, 0, 6)>,
+ <RZG2L_PORT_PINMUX(14, 2, 6)>,
+ <RZG2L_PORT_PINMUX(14, 1, 6)>,
+ <RZG2L_PORT_PINMUX(16, 0, 6)>,
+ <RZG2L_PORT_PINMUX(15, 0, 6)>,
+ <RZG2L_PORT_PINMUX(16, 1, 6)>,
+ <RZG2L_PORT_PINMUX(15, 1, 6)>,
+ <RZG2L_PORT_PINMUX(15, 3, 6)>,
+ <RZG2L_PORT_PINMUX(18, 0, 6)>,
+ <RZG2L_PORT_PINMUX(15, 2, 6)>,
+ <RZG2L_PORT_PINMUX(17, 0, 6)>,
+ <RZG2L_PORT_PINMUX(17, 2, 6)>,
+ <RZG2L_PORT_PINMUX(17, 1, 6)>,
+ <RZG2L_PORT_PINMUX(18, 1, 6)>,
+ <RZG2L_PORT_PINMUX(18, 2, 6)>,
+ <RZG2L_PORT_PINMUX(17, 3, 6)>,
+ <RZG2L_PORT_PINMUX(18, 3, 6)>;
+ drive-strength = <2>;
+ };
+
+ sync {
+ pinmux = <RZG2L_PORT_PINMUX(11, 0, 6)>, /* HSYNC */
+ <RZG2L_PORT_PINMUX(12, 0, 6)>; /* VSYNC */
+ drive-strength = <2>;
+ };
+
+ de {
+ pinmux = <RZG2L_PORT_PINMUX(11, 1, 6)>; /* DE */
+ drive-strength = <2>;
+ };
+
+ clk {
+ pinmux = <RZG2L_PORT_PINMUX(11, 3, 6)>; /* CLK */
+ };
+ };
+};
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- reg = <0x0 0x11900000 0 0x40000>,
- <0x0 0x11940000 0 0x60000>;
+ reg = <0x0 0x11900000 0 0x20000>,
+ <0x0 0x11940000 0 0x40000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
};
power-domains = <&cpg>;
#reset-cells = <1>;
status = "disabled";
+
+ usb0_vbus_otg: regulator-vbus {
+ regulator-name = "vbus";
+ };
};
ohci0: usb@11c50000 {
#error "Cannot set as both PMOD_MTU3 and SW_RSPI_CAN are mutually exclusive"
#endif
+/* Please set SW_I2S0_I2S1. Default value is 0 */
+#define SW_I2S0_I2S1 0
+
#include "r9a07g044c2.dtsi"
#include "rzg2lc-smarc-som.dtsi"
#include "rzg2lc-smarc.dtsi"
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- reg = <0x0 0x11900000 0 0x40000>,
- <0x0 0x11940000 0 0x60000>;
+ reg = <0x0 0x11900000 0 0x20000>,
+ <0x0 0x11940000 0 0x40000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
};
power-domains = <&cpg>;
#reset-cells = <1>;
status = "disabled";
+
+ usb0_vbus_otg: regulator-vbus {
+ regulator-name = "vbus";
+ };
};
ohci0: usb@11c50000 {
status = "disabled";
};
+ i2c0: i2c@10090000 {
+ compatible = "renesas,riic-r9a08g045", "renesas,riic-r9a09g057";
+ reg = <0 0x10090000 0 0x400>;
+ interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A08G045_I2C0_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A08G045_I2C0_MRST>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@10090400 {
+ compatible = "renesas,riic-r9a08g045", "renesas,riic-r9a09g057";
+ reg = <0 0x10090400 0 0x400>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 272 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A08G045_I2C1_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A08G045_I2C1_MRST>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@10090800 {
+ compatible = "renesas,riic-r9a08g045", "renesas,riic-r9a09g057";
+ reg = <0 0x10090800 0 0x400>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A08G045_I2C2_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A08G045_I2C2_MRST>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@10090c00 {
+ compatible = "renesas,riic-r9a08g045", "renesas,riic-r9a09g057";
+ reg = <0 0x10090c00 0 0x400>;
+ interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A08G045_I2C3_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A08G045_I2C3_MRST>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
cpg: clock-controller@11010000 {
compatible = "renesas,r9a08g045-cpg";
reg = <0 0x11010000 0 0x10000>;
resets = <&cpg R9A08G045_IA55_RESETN>;
};
+ dmac: dma-controller@11820000 {
+ compatible = "renesas,r9a08g045-dmac",
+ "renesas,rz-dmac";
+ reg = <0 0x11820000 0 0x10000>,
+ <0 0x11830000 0 0x10000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 112 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 115 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 117 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 118 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 119 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD R9A08G045_DMAC_ACLK>,
+ <&cpg CPG_MOD R9A08G045_DMAC_PCLK>;
+ clock-names = "main", "register";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A08G045_DMAC_ARESETN>,
+ <&cpg R9A08G045_DMAC_RST_ASYNC>;
+ reset-names = "arst", "rst_async";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
sdhi0: mmc@11c00000 {
compatible = "renesas,sdhi-r9a08g045", "renesas,rzg2l-sdhi";
reg = <0x0 0x11c00000 0 0x10000>;
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- reg = <0x0 0x12400000 0 0x40000>,
- <0x0 0x12440000 0 0x60000>;
+ reg = <0x0 0x12400000 0 0x20000>,
+ <0x0 0x12440000 0 0x40000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2H(P) SoC
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g057-cpg.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "renesas,r9a09g057";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ audio_extal_clk: audio-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a55";
+ reg = <0>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@200 {
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@300 {
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ L3_CA55: cache-controller-0 {
+ compatible = "cache";
+ cache-unified;
+ cache-size = <0x100000>;
+ cache-level = <3>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ qextal_clk: qextal-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ rtxin_clk: rtxin-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ pinctrl: pinctrl@10410000 {
+ compatible = "renesas,r9a09g057-pinctrl";
+ reg = <0 0x10410000 0 0x10000>;
+ clocks = <&cpg CPG_CORE R9A09G057_IOTOP_0_SHCLK>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 96>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ power-domains = <&cpg>;
+ resets = <&cpg 0xa5>, <&cpg 0xa6>;
+ };
+
+ cpg: clock-controller@10420000 {
+ compatible = "renesas,r9a09g057-cpg";
+ reg = <0 0x10420000 0 0x10000>;
+ clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>;
+ clock-names = "audio_extal", "rtxin", "qextal";
+ #clock-cells = <2>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ sys: system-controller@10430000 {
+ compatible = "renesas,r9a09g057-sys";
+ reg = <0 0x10430000 0 0x10000>;
+ clocks = <&cpg CPG_CORE R9A09G057_SYS_0_PCLK>;
+ resets = <&cpg 0x30>;
+ status = "disabled";
+ };
+
+ ostm0: timer@11800000 {
+ compatible = "renesas,r9a09g057-ostm", "renesas,ostm";
+ reg = <0x0 0x11800000 0x0 0x1000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x43>;
+ resets = <&cpg 0x6d>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm1: timer@11801000 {
+ compatible = "renesas,r9a09g057-ostm", "renesas,ostm";
+ reg = <0x0 0x11801000 0x0 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x44>;
+ resets = <&cpg 0x6e>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm2: timer@14000000 {
+ compatible = "renesas,r9a09g057-ostm", "renesas,ostm";
+ reg = <0x0 0x14000000 0x0 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x45>;
+ resets = <&cpg 0x6f>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm3: timer@14001000 {
+ compatible = "renesas,r9a09g057-ostm", "renesas,ostm";
+ reg = <0x0 0x14001000 0x0 0x1000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x46>;
+ resets = <&cpg 0x70>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm4: timer@12c00000 {
+ compatible = "renesas,r9a09g057-ostm", "renesas,ostm";
+ reg = <0x0 0x12c00000 0x0 0x1000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x47>;
+ resets = <&cpg 0x71>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm5: timer@12c01000 {
+ compatible = "renesas,r9a09g057-ostm", "renesas,ostm";
+ reg = <0x0 0x12c01000 0x0 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x48>;
+ resets = <&cpg 0x72>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm6: timer@12c02000 {
+ compatible = "renesas,r9a09g057-ostm", "renesas,ostm";
+ reg = <0x0 0x12c02000 0x0 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x49>;
+ resets = <&cpg 0x73>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm7: timer@12c03000 {
+ compatible = "renesas,r9a09g057-ostm", "renesas,ostm";
+ reg = <0x0 0x12c03000 0x0 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x4a>;
+ resets = <&cpg 0x74>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog@11c00400 {
+ compatible = "renesas,r9a09g057-wdt";
+ reg = <0 0x11c00400 0 0x400>;
+ clocks = <&cpg CPG_MOD 0x4b>, <&cpg CPG_MOD 0x4c>;
+ clock-names = "pclk", "oscclk";
+ resets = <&cpg 0x75>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt1: watchdog@14400000 {
+ compatible = "renesas,r9a09g057-wdt";
+ reg = <0 0x14400000 0 0x400>;
+ clocks = <&cpg CPG_MOD 0x4d>, <&cpg CPG_MOD 0x4e>;
+ clock-names = "pclk", "oscclk";
+ resets = <&cpg 0x76>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@13000000 {
+ compatible = "renesas,r9a09g057-wdt";
+ reg = <0 0x13000000 0 0x400>;
+ clocks = <&cpg CPG_MOD 0x4f>, <&cpg CPG_MOD 0x50>;
+ clock-names = "pclk", "oscclk";
+ resets = <&cpg 0x77>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt3: watchdog@13000400 {
+ compatible = "renesas,r9a09g057-wdt";
+ reg = <0 0x13000400 0 0x400>;
+ clocks = <&cpg CPG_MOD 0x51>, <&cpg CPG_MOD 0x52>;
+ clock-names = "pclk", "oscclk";
+ resets = <&cpg 0x78>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ scif: serial@11c01400 {
+ compatible = "renesas,scif-r9a09g057";
+ reg = <0 0x11c01400 0 0x400>;
+ interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 536 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 537 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eri", "rxi", "txi", "bri", "dri",
+ "tei", "tei-dri", "rxi-edge", "txi-edge";
+ clocks = <&cpg CPG_MOD 0x8f>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg 0x95>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@14400400 {
+ compatible = "renesas,riic-r9a09g057";
+ reg = <0 0x14400400 0 0x400>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 507 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 506 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x94>;
+ resets = <&cpg 0x98>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@14400800 {
+ compatible = "renesas,riic-r9a09g057";
+ reg = <0 0x14400800 0 0x400>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 508 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x95>;
+ resets = <&cpg 0x99>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@14400c00 {
+ compatible = "renesas,riic-r9a09g057";
+ reg = <0 0x14400c00 0 0x400>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 511 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x96>;
+ resets = <&cpg 0x9a>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@14401000 {
+ compatible = "renesas,riic-r9a09g057";
+ reg = <0 0x14401000 0 0x400>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 513 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 512 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x97>;
+ resets = <&cpg 0x9b>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@14401400 {
+ compatible = "renesas,riic-r9a09g057";
+ reg = <0 0x14401400 0 0x400>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 515 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 514 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x98>;
+ resets = <&cpg 0x9c>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@14401800 {
+ compatible = "renesas,riic-r9a09g057";
+ reg = <0 0x14401800 0 0x400>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 517 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 516 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x99>;
+ resets = <&cpg 0x9d>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@14401c00 {
+ compatible = "renesas,riic-r9a09g057";
+ reg = <0 0x14401c00 0 0x400>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 519 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 518 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x9a>;
+ resets = <&cpg 0x9e>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@14402000 {
+ compatible = "renesas,riic-r9a09g057";
+ reg = <0 0x14402000 0 0x400>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 521 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 520 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x9b>;
+ resets = <&cpg 0x9f>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@11c01000 {
+ compatible = "renesas,riic-r9a09g057";
+ reg = <0 0x11c01000 0 0x400>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 523 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 522 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x93>;
+ resets = <&cpg 0xa0>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@14900000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x14900000 0 0x20000>,
+ <0x0 0x14940000 0 0x80000>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ sdhi0: mmc@15c00000 {
+ compatible = "renesas,sdhi-r9a09g057";
+ reg = <0x0 0x15c00000 0 0x10000>;
+ interrupts = <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xa3>, <&cpg CPG_MOD 0xa5>,
+ <&cpg CPG_MOD 0xa4>, <&cpg CPG_MOD 0xa6>;
+ clock-names = "core", "clkh", "cd", "aclk";
+ resets = <&cpg 0xa7>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sdhi1: mmc@15c10000 {
+ compatible = "renesas,sdhi-r9a09g057";
+ reg = <0x0 0x15c10000 0 0x10000>;
+ interrupts = <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xa7>, <&cpg CPG_MOD 0xa9>,
+ <&cpg CPG_MOD 0xa8>, <&cpg CPG_MOD 0xaa>;
+ clock-names = "core", "clkh", "cd", "aclk";
+ resets = <&cpg 0xa8>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sdhi2: mmc@15c20000 {
+ compatible = "renesas,sdhi-r9a09g057";
+ reg = <0x0 0x15c20000 0 0x10000>;
+ interrupts = <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xab>, <&cpg CPG_MOD 0xad>,
+ <&cpg CPG_MOD 0xac>, <&cpg CPG_MOD 0xae>;
+ clock-names = "core", "clkh", "cd", "aclk";
+ resets = <&cpg 0xa9>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2H EVK board
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "r9a09g057.dtsi"
+
+/ {
+ model = "Renesas RZ/V2H EVK Board based on r9a09g057h44";
+ compatible = "renesas,rzv2h-evk", "renesas,r9a09g057h44", "renesas,r9a09g057";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ mmc1 = &sdhi1;
+ serial0 = &scif;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x1 0xF8000000>;
+ };
+
+ memory@240000000 {
+ device_type = "memory";
+ reg = <0x2 0x40000000 0x2 0x00000000>;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vqmmc_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHI1 VccQ";
+ gpios = <&pinctrl RZG2L_GPIO(10, 2) GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios-states = <0>;
+ states = <3300000 0>, <1800000 1>;
+ };
+};
+
+&audio_extal_clk {
+ clock-frequency = <22579200>;
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+};
+
+&i2c6 {
+ pinctrl-0 = <&i2c6_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+};
+
+&i2c7 {
+ pinctrl-0 = <&i2c7_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+};
+
+&i2c8 {
+ pinctrl-0 = <&i2c8_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+};
+
+&ostm0 {
+ status = "okay";
+};
+
+&ostm1 {
+ status = "okay";
+};
+
+&ostm2 {
+ status = "okay";
+};
+
+&ostm3 {
+ status = "okay";
+};
+
+&ostm4 {
+ status = "okay";
+};
+
+&ostm5 {
+ status = "okay";
+};
+
+&ostm6 {
+ status = "okay";
+};
+
+&ostm7 {
+ status = "okay";
+};
+
+&pinctrl {
+ i2c0_pins: i2c0 {
+ pinmux = <RZG2L_PORT_PINMUX(3, 0, 1)>, /* I2C0_SDA */
+ <RZG2L_PORT_PINMUX(3, 1, 1)>; /* I2C0_SCL */
+ };
+
+ i2c1_pins: i2c1 {
+ pinmux = <RZG2L_PORT_PINMUX(3, 2, 1)>, /* I2C1_SDA */
+ <RZG2L_PORT_PINMUX(3, 3, 1)>; /* I2C1_SCL */
+ };
+
+ i2c2_pins: i2c2 {
+ pinmux = <RZG2L_PORT_PINMUX(2, 0, 4)>, /* I2C2_SDA */
+ <RZG2L_PORT_PINMUX(2, 1, 4)>; /* I2C2_SCL */
+ };
+
+ i2c3_pins: i2c3 {
+ pinmux = <RZG2L_PORT_PINMUX(3, 6, 1)>, /* I2C3_SDA */
+ <RZG2L_PORT_PINMUX(3, 7, 1)>; /* I2C3_SCL */
+ };
+
+ i2c6_pins: i2c6 {
+ pinmux = <RZG2L_PORT_PINMUX(4, 4, 1)>, /* I2C6_SDA */
+ <RZG2L_PORT_PINMUX(4, 5, 1)>; /* I2C6_SCL */
+ };
+
+ i2c7_pins: i2c7 {
+ pinmux = <RZG2L_PORT_PINMUX(4, 6, 1)>, /* I2C7_SDA */
+ <RZG2L_PORT_PINMUX(4, 7, 1)>; /* I2C7_SCL */
+ };
+
+ i2c8_pins: i2c8 {
+ pinmux = <RZG2L_PORT_PINMUX(0, 6, 1)>, /* I2C8_SDA */
+ <RZG2L_PORT_PINMUX(0, 7, 1)>; /* I2C8_SCL */
+ };
+
+ scif_pins: scif {
+ pins = "SCIF_TXD", "SCIF_RXD";
+ renesas,output-impedance = <1>;
+ };
+
+ sd1-pwr-en-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(10, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "sd1_pwr_en";
+ };
+
+ sdhi1_pins: sd1 {
+ sd1_dat_cmd {
+ pins = "SD1DAT0", "SD1DAT1", "SD1DAT2", "SD1DAT3", "SD1CMD";
+ input-enable;
+ renesas,output-impedance = <3>;
+ slew-rate = <0>;
+ };
+
+ sd1_clk {
+ pins = "SD1CLK";
+ renesas,output-impedance = <3>;
+ slew-rate = <0>;
+ };
+
+ sd1_cd {
+ pinmux = <RZG2L_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */
+ };
+ };
+};
+
+&qextal_clk {
+ clock-frequency = <24000000>;
+};
+
+&rtxin_clk {
+ clock-frequency = <32768>;
+};
+
+&scif {
+ pinctrl-0 = <&scif_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins>;
+ pinctrl-names = "default", "state_uhs";
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vqmmc_sdhi1>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+};
&phyrst {
status = "okay";
- usb0_vbus_otg: regulator-vbus {
- regulator-name = "vbus";
- };
};
&scif0 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common Device Tree for the RZ/G2UL SMARC EVK (and alike EVKs) with
+ * ADV7513 transmitter connected to DU enabled.
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+&{/} {
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "d";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7513_out>;
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ ports {
+ port@0 {
+ du_out_rgb: endpoint {
+ remote-endpoint = <&adv7513_in>;
+ };
+ };
+ };
+};
+
+&ADV7513_PARENT_I2C {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adv7513: adv7513@39 {
+ compatible = "adi,adv7513";
+ reg = <0x39>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+
+ avdd-supply = <®_1p8v>;
+ dvdd-supply = <®_1p8v>;
+ pvdd-supply = <®_1p8v>;
+ dvdd-3v-supply = <®_3p3v>;
+ bgvdd-supply = <®_1p8v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7513_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ adv7513_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+};
<RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
};
+ ssi1_pins: ssi1 {
+ pinmux = <RZG2L_PORT_PINMUX(46, 0, 1)>, /* BCK */
+ <RZG2L_PORT_PINMUX(46, 1, 1)>, /* RCK */
+ <RZG2L_PORT_PINMUX(46, 2, 1)>; /* TXD */
+ };
+
usb0_pins: usb0 {
pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
<RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
};
eth0_pins: eth0 {
- pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
- <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
- <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
- <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
- <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
- <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
- <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
- <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
- <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
- <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
- <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
- <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
- <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
- <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
- <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
- <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */
+ txc {
+ pinmux = <RZG2L_PORT_PINMUX(20, 0, 1)>; /* ET0_TXC */
+ power-source = <1800>;
+ output-enable;
+ };
+
+ mux {
+ pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+ <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+ <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+ <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+ <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+ <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+ <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+ <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+ <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+ <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+ <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+ <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+ <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+ <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */
+ power-source = <1800>;
+ };
+
+ irq {
+ pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */
+ };
};
eth1_pins: eth1 {
- pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */
- <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
- <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
- <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */
- <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
- <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
- <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
- <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
- <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
- <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
- <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
- <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
- <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
- <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
- <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */
- <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */
+ txc {
+ pinmux = <RZG2L_PORT_PINMUX(29, 0, 1)>; /* ET1_TXC */
+ power-source = <1800>;
+ output-enable;
+ };
+
+ mux {
+ pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */
+ <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
+ <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
+ <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
+ <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
+ <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
+ <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
+ <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
+ <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
+ <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
+ <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
+ <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
+ <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
+ <RZG2L_PORT_PINMUX(36, 0, 1)>; /* ET1_RXD3 */
+ power-source = <1800>;
+ };
+
+ irq {
+ pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */
+ };
};
gpio-sd0-pwr-en-hog {
};
};
};
+
+ sound_card {
+ compatible = "audio-graph-card";
+ label = "HDMI-Audio";
+ dais = <&i2s2_port>;
+ };
};
&cpu_dai {
remote-endpoint = <&hdmi_con_out>;
};
};
+
+ port@2 {
+ reg = <2>;
+ codec_endpoint: endpoint {
+ remote-endpoint = <&i2s2_cpu_endpoint>;
+ };
+ };
};
};
};
status = "okay";
};
+&ssi1 {
+ pinctrl-0 = <&ssi1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ i2s2_port: port {
+ i2s2_cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ dai-format = "i2s";
+
+ bitclock-master = <&i2s2_cpu_endpoint>;
+ frame-master = <&i2s2_cpu_endpoint>;
+ };
+ };
+};
+
&vccq_sdhi1 {
gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
};
&pinctrl {
eth0_pins: eth0 {
- pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
- <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
- <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
- <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
- <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
- <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
- <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
- <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
- <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
- <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
- <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
- <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
- <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
- <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
- <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
- <RZG2L_PORT_PINMUX(0, 0, 1)>; /* IRQ0 */
+ txc {
+ pinmux = <RZG2L_PORT_PINMUX(20, 0, 1)>; /* ET0_TXC */
+ power-source = <1800>;
+ output-enable;
+ };
+
+ mux {
+ pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+ <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+ <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+ <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+ <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+ <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+ <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+ <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+ <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+ <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+ <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+ <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+ <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+ <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */
+ power-source = <1800>;
+ };
+
+ irq {
+ pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* IRQ0 */
+ };
};
gpio-sd0-pwr-en-hog {
};
};
};
+
+#if (SW_I2S0_I2S1)
+ /delete-node/ sound;
+
+ sound_card {
+ compatible = "audio-graph-card";
+ label = "HDMI-Audio";
+ dais = <&i2s2_port>;
+ };
+#endif
};
#if (SW_SCIF_CAN || SW_RSPI_CAN)
};
#endif
+#if (!SW_I2S0_I2S1)
&cpu_dai {
sound-dai = <&ssi0>;
};
+#endif
&dsi {
status = "okay";
remote-endpoint = <&hdmi_con_out>;
};
};
+
+#if (SW_I2S0_I2S1)
+ port@2 {
+ reg = <2>;
+ codec_endpoint: endpoint {
+ remote-endpoint = <&i2s2_cpu_endpoint>;
+ };
+ };
+#endif
};
};
};
pinctrl-names = "default";
status = "okay";
+
+#if (SW_I2S0_I2S1)
+ i2s2_port: port {
+ i2s2_cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ dai-format = "i2s";
+
+ bitclock-master = <&i2s2_cpu_endpoint>;
+ frame-master = <&i2s2_cpu_endpoint>;
+ };
+ };
+#endif
};
#if (SW_RSPI_CAN)
};
eth0_pins: eth0 {
- pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */
- <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */
- <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */
- <RZG2L_PORT_PINMUX(1, 0, 1)>, /* ET0_TXC */
- <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */
- <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */
- <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */
- <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */
- <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */
- <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */
- <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */
- <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */
- <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */
- <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */
- <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */
- <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */
+ txc {
+ pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>; /* ET0_TXC */
+ power-source = <1800>;
+ output-enable;
+ };
+
+ mux {
+ pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */
+ <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */
+ <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */
+ <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */
+ <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */
+ <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */
+ <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */
+ <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */
+ <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */
+ <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */
+ <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */
+ <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */
+ <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */
+ <RZG2L_PORT_PINMUX(4, 1, 1)>; /* ET0_RXD3 */
+ power-source = <1800>;
+ };
+
+ irq {
+ pinmux = <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */
+ };
};
eth1_pins: eth1 {
- pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */
- <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */
- <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */
- <RZG2L_PORT_PINMUX(7, 0, 1)>, /* ET1_TXC */
- <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */
- <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */
- <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */
- <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */
- <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */
- <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */
- <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */
- <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */
- <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */
- <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */
- <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */
- <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */
+ txc {
+ pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>; /* ET1_TXC */
+ power-source = <1800>;
+ output-enable;
+ };
+
+ mux {
+ pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */
+ <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */
+ <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */
+ <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */
+ <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */
+ <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */
+ <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */
+ <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */
+ <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */
+ <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */
+ <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */
+ <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */
+ <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */
+ <RZG2L_PORT_PINMUX(10, 0, 1)>; /* ET1_RXD3 */
+ power-source = <1800>;
+ };
+
+ irq {
+ pinmux = <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */
+ };
};
sdhi0_emmc_pins: sd0emmc {
compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045";
aliases {
+ i2c1 = &i2c1;
mmc0 = &sdhi0;
#if SW_CONFIG3 == SW_OFF
mmc2 = &sdhi2;
clock-frequency = <24000000>;
};
+&i2c1 {
+ status = "okay";
+};
+
#if SW_CONFIG2 == SW_ON
/* SD0 slot */
&sdhi0 {
/ {
aliases {
+ i2c0 = &i2c0;
serial0 = &scif0;
mmc1 = &sdhi1;
};
};
};
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <1000000>;
+};
+
&pinctrl {
key-1-gpio-hog {
gpio-hog;
};
};
+ pcie_clk: clk-9fgv0841-pci {
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ #clock-cells = <0>;
+ };
+
reg_1p2v: regulator-1p2v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.2V";
status = "okay";
};
+&pcie0_clkref {
+ compatible = "gpio-gate-clock";
+ clocks = <&pcie_clk>;
+ enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ /delete-property/ clock-frequency;
+};
+
+&pciec0 {
+ reset-gpio = <&io_expander_a 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "px30-firefly-jd4-core.dtsi"
+
+/ {
+ compatible = "firefly,px30-jd4-core-mb", "firefly,px30-jd4-core",
+ "rockchip,px30";
+ model = "Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard";
+
+ aliases {
+ ethernet0 = &gmac;
+ mmc0 = &sdmmc;
+ mmc1 = &sdio;
+ mmc2 = &emmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ dc_12v: dc-12v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 2>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1500000>;
+ poll-interval = <100>;
+
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <18000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&blue_led>, <&green_led>;
+
+ blue-led {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ label = "px30-mb-jd4:blue:work";
+ linux,default-trigger = "heartbeat";
+ };
+
+ green-led {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+ label = "px30-mb-jd4:blue:diy";
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+ };
+
+ vcc5v0_baseboard: vcc5v0-baseboard-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_baseboard";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_rmii>;
+ snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 50000 50000>;
+ status = "okay";
+};
+
+&pinctrl {
+ leds {
+ blue_led: blue-led {
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ green_led: green-led {
+ rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <800>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ non-removable;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "okay";
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m1_xfer>;
+ status = "okay";
+};
+
+&usb20_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+ compatible = "firefly,px30-jd4-core", "rockchip,px30";
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_baseboard>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v0>;
+ vqmmc-supply = <&vccio_flash>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_log>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <0>;
+ clock-output-names = "xin32k";
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v0: vcc_rmii: DCDC_REG4 {
+ regulator-name = "vcc_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG5 {
+ regulator-name = "vcc3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v0: LDO_REG1 {
+ regulator-name = "vcc_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_1v0: LDO_REG3 {
+ regulator-name = "vdd_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc3v0_pmu: LDO_REG4 {
+ regulator-name = "vcc3v0_pmu";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: LDO_REG6 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG7 {
+ regulator-name = "vcc2v8_dvp";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <2800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG8 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v5_dvp: LDO_REG9 {
+ regulator-name = "vcc1v5_dvp";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcc3v3_lcd: SWITCH_REG1 {
+ regulator-name = "vcc3v3_lcd";
+ regulator-boot-on;
+ };
+
+ vcc5v0_host: SWITCH_REG2 {
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&io_domains {
+ vccio1-supply = <&vccio_sdio>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_3v0>;
+ vccio4-supply = <&vcc3v0_pmu>;
+ vccio5-supply = <&vcc_3v0>;
+ vccio6-supply = <&vccio_flash>;
+ status = "okay";
+};
+
+&pinctrl {
+ emmc {
+ emmc_reset: emmc-reset {
+ rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins =
+ <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v0_pmu>;
+ pmuio2-supply = <&vcc3v0_pmu>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
- supports-emmc;
mmc-pwrseq = <&emmc_pwrseq>;
non-removable;
vmmc-supply = <&vcc_3v3>;
power_led: led-0 {
label = "firefly:red:power";
- linux,default-trigger = "ir-power-click";
+ linux,default-trigger = "default-on";
default-state = "on";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
};
user_led: led-1 {
label = "firefly:blue:user";
- linux,default-trigger = "ir-user-click";
+ linux,default-trigger = "rc-feedback";
default-state = "off";
gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * (C) Copyright 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3328-nanopi-r2s.dts"
+
+/ {
+ compatible = "friendlyarm,nanopi-r2s-plus", "rockchip,rk3328";
+ model = "FriendlyElec NanoPi R2S Plus";
+
+ aliases {
+ mmc1 = &emmc;
+ };
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ status = "okay";
+};
compatible = "rockchip,rk3328-dw-hdmi";
reg = <0x0 0xff3c0000 0x0 0x20000>;
reg-io-width = <4>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI>,
<&cru SCLK_HDMI_SFC>,
<&cru SCLK_RTC32K>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
+ resets = <&cru SRST_MMC0>;
+ reset-names = "reset";
status = "disabled";
};
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
+ resets = <&cru SRST_SDIO>;
+ reset-names = "reset";
status = "disabled";
};
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
status = "disabled";
};
status = "disabled";
};
+ sdmmc_ext: mmc@ff5f0000 {
+ compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff5f0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT>,
+ <&cru SCLK_SDMMC_EXT_DRV>, <&cru SCLK_SDMMC_EXT_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_SDMMCEXT>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
usbdrd3: usb@ff600000 {
compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
reg = <0x0 0xff600000 0x0 0x100000>;
fan: fan@18 {
compatible = "ti,amc6821";
reg = <0x18>;
- #cooling-cells = <2>;
};
rtc_twi: rtc@6f {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/rk3399-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3399-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ compatible = "rockchip,rk3399";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ spi4 = &spi4;
+ spi5 = &spi5;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 { /* Cortex-A53 */
+ core0 {
+ cpu = <&cpu_l0>;
+ };
+ core1 {
+ cpu = <&cpu_l1>;
+ };
+ core2 {
+ cpu = <&cpu_l2>;
+ };
+ core3 {
+ cpu = <&cpu_l3>;
+ };
+ };
+
+ cluster1 { /* Cortex-A72 */
+ core0 {
+ cpu = <&cpu_b0>;
+ };
+ core1 {
+ cpu = <&cpu_b1>;
+ };
+ };
+ };
+
+ cpu_l0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <485>;
+ clocks = <&cru ARMCLKL>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l>;
+ };
+
+ cpu_l1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <485>;
+ clocks = <&cru ARMCLKL>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l>;
+ };
+
+ cpu_l2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <485>;
+ clocks = <&cru ARMCLKL>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l>;
+ };
+
+ cpu_l3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <485>;
+ clocks = <&cru ARMCLKL>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l>;
+ };
+
+ cpu_b0: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ clocks = <&cru ARMCLKB>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <436>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ i-cache-size = <0xC000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_cache_b>;
+
+ thermal-idle {
+ #cooling-cells = <2>;
+ duration-us = <10000>;
+ exit-latency-us = <500>;
+ };
+ };
+
+ cpu_b1: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ clocks = <&cru ARMCLKB>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <436>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ i-cache-size = <0xC000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_cache_b>;
+
+ thermal-idle {
+ #cooling-cells = <2>;
+ duration-us = <10000>;
+ exit-latency-us = <500>;
+ };
+ };
+
+ l2_cache_l: l2-cache-cluster0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+
+ l2_cache_b: l2-cache-cluster1 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
+ };
+
+ CLUSTER_SLEEP: cluster-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <2000>;
+ };
+ };
+ };
+
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopl_out>, <&vopb_out>;
+ };
+
+ dmc: memory-controller {
+ compatible = "rockchip,rk3399-dmc";
+ rockchip,pmu = <&pmugrf>;
+ devfreq-events = <&dfi>;
+ clocks = <&cru SCLK_DDRC>;
+ clock-names = "dmc_clk";
+ status = "disabled";
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+ };
+
+ pmu_a72 {
+ compatible = "arm,cortex-a72-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+ arm,no-tick-in-suspend;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ pcie0: pcie@f8000000 {
+ compatible = "rockchip,rk3399-pcie";
+ reg = <0x0 0xf8000000 0x0 0x2000000>,
+ <0x0 0xfd000000 0x0 0x1000000>;
+ reg-names = "axi-base", "apb-base";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ aspm-no-l0s;
+ bus-range = <0x0 0x1f>;
+ clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+ <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+ clock-names = "aclk", "aclk-perf",
+ "hclk", "pm";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sys", "legacy", "client";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+ <0 0 0 2 &pcie0_intc 1>,
+ <0 0 0 3 &pcie0_intc 2>,
+ <0 0 0 4 &pcie0_intc 3>;
+ max-link-speed = <1>;
+ msi-map = <0x0 &its 0x0 0x1000>;
+ phys = <&pcie_phy 0>, <&pcie_phy 1>,
+ <&pcie_phy 2>, <&pcie_phy 3>;
+ phy-names = "pcie-phy-0", "pcie-phy-1",
+ "pcie-phy-2", "pcie-phy-3";
+ ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+ <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
+ resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+ <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
+ <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
+ <&cru SRST_A_PCIE>;
+ reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+ "pm", "pclk", "aclk";
+ status = "disabled";
+
+ pcie0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie0_ep: pcie-ep@f8000000 {
+ compatible = "rockchip,rk3399-pcie-ep";
+ reg = <0x0 0xfd000000 0x0 0x1000000>,
+ <0x0 0xfa000000 0x0 0x2000000>;
+ reg-names = "apb-base", "mem-base";
+ clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+ <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+ clock-names = "aclk", "aclk-perf",
+ "hclk", "pm";
+ max-functions = /bits/ 8 <8>;
+ num-lanes = <4>;
+ resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+ <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
+ <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
+ <&cru SRST_A_PCIE>;
+ reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+ "pm", "pclk", "aclk";
+ phys = <&pcie_phy 0>, <&pcie_phy 1>,
+ <&pcie_phy 2>, <&pcie_phy 3>;
+ phy-names = "pcie-phy-0", "pcie-phy-1",
+ "pcie-phy-2", "pcie-phy-3";
+ rockchip,max-outbound-regions = <32>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqnb_cpm>;
+ status = "disabled";
+ };
+
+ gmac: ethernet@fe300000 {
+ compatible = "rockchip,rk3399-gmac";
+ reg = <0x0 0xfe300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "macirq";
+ clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+ <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
+ <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
+ <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_ref",
+ "clk_mac_refout", "aclk_mac",
+ "pclk_mac";
+ power-domains = <&power RK3399_PD_GMAC>;
+ resets = <&cru SRST_A_GMAC>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&grf>;
+ snps,txpbl = <0x4>;
+ status = "disabled";
+ };
+
+ sdio0: mmc@fe310000 {
+ compatible = "rockchip,rk3399-dw-mshc",
+ "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe310000 0x0 0x4000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+ max-frequency = <150000000>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
+ resets = <&cru SRST_SDIO0>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ sdmmc: mmc@fe320000 {
+ compatible = "rockchip,rk3399-dw-mshc",
+ "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe320000 0x0 0x4000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
+ max-frequency = <150000000>;
+ assigned-clocks = <&cru HCLK_SD>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ power-domains = <&power RK3399_PD_SD>;
+ resets = <&cru SRST_SDMMC>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ sdhci: mmc@fe330000 {
+ compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+ reg = <0x0 0xfe330000 0x0 0x10000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
+ arasan,soc-ctl-syscon = <&grf>;
+ assigned-clocks = <&cru SCLK_EMMC>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+ clock-names = "clk_xin", "clk_ahb";
+ clock-output-names = "emmc_cardclock";
+ #clock-cells = <0>;
+ phys = <&emmc_phy>;
+ phy-names = "phy_arasan";
+ power-domains = <&power RK3399_PD_EMMC>;
+ disable-cqe-dcmd;
+ status = "disabled";
+ };
+
+ usb_host0_ehci: usb@fe380000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfe380000 0x0 0x20000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
+ <&u2phy0>;
+ phys = <&u2phy0_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@fe3a0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfe3a0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
+ <&u2phy0>;
+ phys = <&u2phy0_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ehci: usb@fe3c0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfe3c0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
+ <&u2phy1>;
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ohci: usb@fe3e0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfe3e0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
+ <&u2phy1>;
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ debug@fe430000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0 0xfe430000 0 0x1000>;
+ clocks = <&cru PCLK_COREDBG_L>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu_l0>;
+ };
+
+ debug@fe432000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0 0xfe432000 0 0x1000>;
+ clocks = <&cru PCLK_COREDBG_L>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu_l1>;
+ };
+
+ debug@fe434000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0 0xfe434000 0 0x1000>;
+ clocks = <&cru PCLK_COREDBG_L>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu_l2>;
+ };
+
+ debug@fe436000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0 0xfe436000 0 0x1000>;
+ clocks = <&cru PCLK_COREDBG_L>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu_l3>;
+ };
+
+ debug@fe610000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0 0xfe610000 0 0x1000>;
+ clocks = <&cru PCLK_COREDBG_B>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu_b0>;
+ };
+
+ debug@fe710000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0 0xfe710000 0 0x1000>;
+ clocks = <&cru PCLK_COREDBG_B>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu_b1>;
+ };
+
+ usbdrd3_0: usb@fe800000 {
+ compatible = "rockchip,rk3399-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+ <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+ <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk", "aclk_usb3_rksoc_axi_perf",
+ "aclk_usb3", "grf_clk";
+ resets = <&cru SRST_A_USB3_OTG0>;
+ reset-names = "usb3-otg";
+ status = "disabled";
+
+ usbdrd_dwc3_0: usb@fe800000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe800000 0x0 0x100000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
+ <&cru SCLK_USB3OTG0_SUSPEND>;
+ clock-names = "ref", "bus_early", "suspend";
+ dr_mode = "otg";
+ phys = <&u2phy0_otg>, <&tcphy0_usb3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ power-domains = <&power RK3399_PD_USB3>;
+ status = "disabled";
+ };
+ };
+
+ usbdrd3_1: usb@fe900000 {
+ compatible = "rockchip,rk3399-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
+ <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+ <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk", "aclk_usb3_rksoc_axi_perf",
+ "aclk_usb3", "grf_clk";
+ resets = <&cru SRST_A_USB3_OTG1>;
+ reset-names = "usb3-otg";
+ status = "disabled";
+
+ usbdrd_dwc3_1: usb@fe900000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe900000 0x0 0x100000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>,
+ <&cru SCLK_USB3OTG1_SUSPEND>;
+ clock-names = "ref", "bus_early", "suspend";
+ dr_mode = "otg";
+ phys = <&u2phy1_otg>, <&tcphy1_usb3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ power-domains = <&power RK3399_PD_USB3>;
+ status = "disabled";
+ };
+ };
+
+ cdn_dp: dp@fec00000 {
+ compatible = "rockchip,rk3399-cdn-dp";
+ reg = <0x0 0xfec00000 0x0 0x100000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>;
+ assigned-clock-rates = <100000000>, <200000000>;
+ clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+ <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
+ clock-names = "core-clk", "pclk", "spdif", "grf";
+ phys = <&tcphy0_dp>, <&tcphy1_dp>;
+ power-domains = <&power RK3399_PD_HDCP>;
+ resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
+ <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
+ reset-names = "spdif", "dptx", "apb", "core";
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+
+ ports {
+ dp_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_dp>;
+ };
+
+ dp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_dp>;
+ };
+ };
+ };
+ };
+
+ gic: interrupt-controller@fee00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+
+ reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
+ <0x0 0xfef00000 0 0xc0000>, /* GICR */
+ <0x0 0xfff00000 0 0x10000>, /* GICC */
+ <0x0 0xfff10000 0 0x10000>, /* GICH */
+ <0x0 0xfff20000 0 0x10000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+ its: msi-controller@fee20000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0xfee20000 0x0 0x20000>;
+ };
+
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
+ };
+
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu_b0 &cpu_b1>;
+ };
+ };
+ };
+
+ saradc: saradc@ff100000 {
+ compatible = "rockchip,rk3399-saradc";
+ reg = <0x0 0xff100000 0x0 0x100>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
+ #io-channel-cells = <1>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_P_SARADC>;
+ reset-names = "saradc-apb";
+ status = "disabled";
+ };
+
+ crypto0: crypto@ff8b0000 {
+ compatible = "rockchip,rk3399-crypto";
+ reg = <0x0 0xff8b0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>;
+ clock-names = "hclk_master", "hclk_slave", "sclk";
+ resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>;
+ reset-names = "master", "slave", "crypto-rst";
+ };
+
+ crypto1: crypto@ff8b8000 {
+ compatible = "rockchip,rk3399-crypto";
+ reg = <0x0 0xff8b8000 0x0 0x4000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>;
+ clock-names = "hclk_master", "hclk_slave", "sclk";
+ resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>;
+ reset-names = "master", "slave", "crypto-rst";
+ };
+
+ i2c1: i2c@ff110000 {
+ compatible = "rockchip,rk3399-i2c";
+ reg = <0x0 0xff110000 0x0 0x1000>;
+ assigned-clocks = <&cru SCLK_I2C1>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ff120000 {
+ compatible = "rockchip,rk3399-i2c";
+ reg = <0x0 0xff120000 0x0 0x1000>;
+ assigned-clocks = <&cru SCLK_I2C2>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ff130000 {
+ compatible = "rockchip,rk3399-i2c";
+ reg = <0x0 0xff130000 0x0 0x1000>;
+ assigned-clocks = <&cru SCLK_I2C3>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@ff140000 {
+ compatible = "rockchip,rk3399-i2c";
+ reg = <0x0 0xff140000 0x0 0x1000>;
+ assigned-clocks = <&cru SCLK_I2C5>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@ff150000 {
+ compatible = "rockchip,rk3399-i2c";
+ reg = <0x0 0xff150000 0x0 0x1000>;
+ assigned-clocks = <&cru SCLK_I2C6>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@ff160000 {
+ compatible = "rockchip,rk3399-i2c";
+ reg = <0x0 0xff160000 0x0 0x1000>;
+ assigned-clocks = <&cru SCLK_I2C7>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart0: serial@ff180000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff180000 0x0 0x100>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
+ status = "disabled";
+ };
+
+ uart1: serial@ff190000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff190000 0x0 0x100>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "disabled";
+ };
+
+ uart2: serial@ff1a0000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff1a0000 0x0 0x100>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2c_xfer>;
+ status = "disabled";
+ };
+
+ uart3: serial@ff1b0000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff1b0000 0x0 0x100>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_xfer>;
+ status = "disabled";
+ };
+
+ spi0: spi@ff1c0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1c0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 10>, <&dmac_peri 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ff1d0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1d0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 12>, <&dmac_peri 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@ff1e0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1e0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 14>, <&dmac_peri 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@ff1f0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1f0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 18>, <&dmac_peri 19>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@ff200000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_bus 8>, <&dmac_bus 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ thermal_zones: thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_alert1: cpu_alert1 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ gpu_alert0: gpu_alert0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ gpu_crit: gpu_crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert0>;
+ cooling-device =
+ <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ tsadc: tsadc@ff260000 {
+ compatible = "rockchip,rk3399-tsadc";
+ reg = <0x0 0xff260000 0x0 0x100>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&cru SCLK_TSADC>;
+ assigned-clock-rates = <750000>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ rockchip,grf = <&grf>;
+ rockchip,hw-tshut-temp = <95000>;
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&otp_pin>;
+ pinctrl-1 = <&otp_out>;
+ pinctrl-2 = <&otp_pin>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
+ qos_emmc: qos@ffa58000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa58000 0x0 0x20>;
+ };
+
+ qos_gmac: qos@ffa5c000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa5c000 0x0 0x20>;
+ };
+
+ qos_pcie: qos@ffa60080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa60080 0x0 0x20>;
+ };
+
+ qos_usb_host0: qos@ffa60100 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa60100 0x0 0x20>;
+ };
+
+ qos_usb_host1: qos@ffa60180 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa60180 0x0 0x20>;
+ };
+
+ qos_usb_otg0: qos@ffa70000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa70000 0x0 0x20>;
+ };
+
+ qos_usb_otg1: qos@ffa70080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa70080 0x0 0x20>;
+ };
+
+ qos_sd: qos@ffa74000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa74000 0x0 0x20>;
+ };
+
+ qos_sdioaudio: qos@ffa76000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa76000 0x0 0x20>;
+ };
+
+ qos_hdcp: qos@ffa90000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa90000 0x0 0x20>;
+ };
+
+ qos_iep: qos@ffa98000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa98000 0x0 0x20>;
+ };
+
+ qos_isp0_m0: qos@ffaa0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffaa0000 0x0 0x20>;
+ };
+
+ qos_isp0_m1: qos@ffaa0080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffaa0080 0x0 0x20>;
+ };
+
+ qos_isp1_m0: qos@ffaa8000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffaa8000 0x0 0x20>;
+ };
+
+ qos_isp1_m1: qos@ffaa8080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffaa8080 0x0 0x20>;
+ };
+
+ qos_rga_r: qos@ffab0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab0000 0x0 0x20>;
+ };
+
+ qos_rga_w: qos@ffab0080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab0080 0x0 0x20>;
+ };
+
+ qos_video_m0: qos@ffab8000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab8000 0x0 0x20>;
+ };
+
+ qos_video_m1_r: qos@ffac0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffac0000 0x0 0x20>;
+ };
+
+ qos_video_m1_w: qos@ffac0080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffac0080 0x0 0x20>;
+ };
+
+ qos_vop_big_r: qos@ffac8000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffac8000 0x0 0x20>;
+ };
+
+ qos_vop_big_w: qos@ffac8080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffac8080 0x0 0x20>;
+ };
+
+ qos_vop_little: qos@ffad0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffad0000 0x0 0x20>;
+ };
+
+ qos_perihp: qos@ffad8080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffad8080 0x0 0x20>;
+ };
+
+ qos_gpu: qos@ffae0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffae0000 0x0 0x20>;
+ };
+
+ pmu: power-management@ff310000 {
+ compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xff310000 0x0 0x1000>;
+
+ /*
+ * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
+ * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
+ * Some of the power domains are grouped together for every
+ * voltage domain.
+ * The detail contents as below.
+ */
+ power: power-controller {
+ compatible = "rockchip,rk3399-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* These power domains are grouped by VD_CENTER */
+ power-domain@RK3399_PD_IEP {
+ reg = <RK3399_PD_IEP>;
+ clocks = <&cru ACLK_IEP>,
+ <&cru HCLK_IEP>;
+ pm_qos = <&qos_iep>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_RGA {
+ reg = <RK3399_PD_RGA>;
+ clocks = <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>;
+ pm_qos = <&qos_rga_r>,
+ <&qos_rga_w>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VCODEC {
+ reg = <RK3399_PD_VCODEC>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ pm_qos = <&qos_video_m0>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VDU {
+ reg = <RK3399_PD_VDU>;
+ clocks = <&cru ACLK_VDU>,
+ <&cru HCLK_VDU>,
+ <&cru SCLK_VDU_CA>,
+ <&cru SCLK_VDU_CORE>;
+ pm_qos = <&qos_video_m1_r>,
+ <&qos_video_m1_w>;
+ #power-domain-cells = <0>;
+ };
+
+ /* These power domains are grouped by VD_GPU */
+ power-domain@RK3399_PD_GPU {
+ reg = <RK3399_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
+ };
+
+ /* These power domains are grouped by VD_LOGIC */
+ power-domain@RK3399_PD_EDP {
+ reg = <RK3399_PD_EDP>;
+ clocks = <&cru PCLK_EDP_CTRL>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_EMMC {
+ reg = <RK3399_PD_EMMC>;
+ clocks = <&cru ACLK_EMMC>;
+ pm_qos = <&qos_emmc>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_GMAC {
+ reg = <RK3399_PD_GMAC>;
+ clocks = <&cru ACLK_GMAC>,
+ <&cru PCLK_GMAC>;
+ pm_qos = <&qos_gmac>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_SD {
+ reg = <RK3399_PD_SD>;
+ clocks = <&cru HCLK_SDMMC>,
+ <&cru SCLK_SDMMC>;
+ pm_qos = <&qos_sd>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_SDIOAUDIO {
+ reg = <RK3399_PD_SDIOAUDIO>;
+ clocks = <&cru HCLK_SDIO>;
+ pm_qos = <&qos_sdioaudio>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_TCPD0 {
+ reg = <RK3399_PD_TCPD0>;
+ clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+ <&cru SCLK_UPHY0_TCPDPHY_REF>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_TCPD1 {
+ reg = <RK3399_PD_TCPD1>;
+ clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+ <&cru SCLK_UPHY1_TCPDPHY_REF>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_USB3 {
+ reg = <RK3399_PD_USB3>;
+ clocks = <&cru ACLK_USB3>;
+ pm_qos = <&qos_usb_otg0>,
+ <&qos_usb_otg1>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VIO {
+ reg = <RK3399_PD_VIO>;
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3399_PD_HDCP {
+ reg = <RK3399_PD_HDCP>;
+ clocks = <&cru ACLK_HDCP>,
+ <&cru HCLK_HDCP>,
+ <&cru PCLK_HDCP>;
+ pm_qos = <&qos_hdcp>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_ISP0 {
+ reg = <RK3399_PD_ISP0>;
+ clocks = <&cru ACLK_ISP0>,
+ <&cru HCLK_ISP0>;
+ pm_qos = <&qos_isp0_m0>,
+ <&qos_isp0_m1>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_ISP1 {
+ reg = <RK3399_PD_ISP1>;
+ clocks = <&cru ACLK_ISP1>,
+ <&cru HCLK_ISP1>;
+ pm_qos = <&qos_isp1_m0>,
+ <&qos_isp1_m1>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VO {
+ reg = <RK3399_PD_VO>;
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3399_PD_VOPB {
+ reg = <RK3399_PD_VOPB>;
+ clocks = <&cru ACLK_VOP0>,
+ <&cru HCLK_VOP0>;
+ pm_qos = <&qos_vop_big_r>,
+ <&qos_vop_big_w>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VOPL {
+ reg = <RK3399_PD_VOPL>;
+ clocks = <&cru ACLK_VOP1>,
+ <&cru HCLK_VOP1>;
+ pm_qos = <&qos_vop_little>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
+ };
+
+ pmugrf: syscon@ff320000 {
+ compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
+ reg = <0x0 0xff320000 0x0 0x1000>;
+
+ pmu_io_domains: io-domains {
+ compatible = "rockchip,rk3399-pmu-io-voltage-domain";
+ status = "disabled";
+ };
+ };
+
+ spi3: spi@ff350000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff350000 0x0 0x1000>;
+ clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart4: serial@ff370000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff370000 0x0 0x100>;
+ clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_xfer>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@ff3c0000 {
+ compatible = "rockchip,rk3399-i2c";
+ reg = <0x0 0xff3c0000 0x0 0x1000>;
+ assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ff3d0000 {
+ compatible = "rockchip,rk3399-i2c";
+ reg = <0x0 0xff3d0000 0x0 0x1000>;
+ assigned-clocks = <&pmucru SCLK_I2C4_PMU>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@ff3e0000 {
+ compatible = "rockchip,rk3399-i2c";
+ reg = <0x0 0xff3e0000 0x0 0x1000>;
+ assigned-clocks = <&pmucru SCLK_I2C8_PMU>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@ff420000 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420000 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@ff420010 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420010 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@ff420020 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420020 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@ff420030 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420030 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3a_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ status = "disabled";
+ };
+
+ dfi: dfi@ff630000 {
+ reg = <0x00 0xff630000 0x00 0x4000>;
+ compatible = "rockchip,rk3399-dfi";
+ rockchip,pmu = <&pmugrf>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_DDR_MON>;
+ clock-names = "pclk_ddr_mon";
+ };
+
+ vpu: video-codec@ff650000 {
+ compatible = "rockchip,rk3399-vpu";
+ reg = <0x0 0xff650000 0x0 0x800>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vepu", "vdpu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "hclk";
+ iommus = <&vpu_mmu>;
+ power-domains = <&power RK3399_PD_VCODEC>;
+ };
+
+ vpu_mmu: iommu@ff650800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff650800 0x0 0x40>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3399_PD_VCODEC>;
+ };
+
+ vdec: video-codec@ff660000 {
+ compatible = "rockchip,rk3399-vdec";
+ reg = <0x0 0xff660000 0x0 0x480>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
+ <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
+ clock-names = "axi", "ahb", "cabac", "core";
+ iommus = <&vdec_mmu>;
+ power-domains = <&power RK3399_PD_VDU>;
+ };
+
+ vdec_mmu: iommu@ff660480 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
+ clock-names = "aclk", "iface";
+ power-domains = <&power RK3399_PD_VDU>;
+ #iommu-cells = <0>;
+ };
+
+ iep_mmu: iommu@ff670800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff670800 0x0 0x40>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ rga: rga@ff680000 {
+ compatible = "rockchip,rk3399-rga";
+ reg = <0x0 0xff680000 0x0 0x10000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
+ clock-names = "aclk", "hclk", "sclk";
+ resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
+ reset-names = "core", "axi", "ahb";
+ power-domains = <&power RK3399_PD_RGA>;
+ };
+
+ efuse0: efuse@ff690000 {
+ compatible = "rockchip,rk3399-efuse";
+ reg = <0x0 0xff690000 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE1024NS>;
+ clock-names = "pclk_efuse";
+
+ /* Data cells */
+ cpu_id: cpu-id@7 {
+ reg = <0x07 0x10>;
+ };
+ cpub_leakage: cpu-leakage@17 {
+ reg = <0x17 0x1>;
+ };
+ gpu_leakage: gpu-leakage@18 {
+ reg = <0x18 0x1>;
+ };
+ center_leakage: center-leakage@19 {
+ reg = <0x19 0x1>;
+ };
+ cpul_leakage: cpu-leakage@1a {
+ reg = <0x1a 0x1>;
+ };
+ logic_leakage: logic-leakage@1b {
+ reg = <0x1b 0x1>;
+ };
+ wafer_info: wafer-info@1c {
+ reg = <0x1c 0x1>;
+ };
+ };
+
+ dmac_bus: dma-controller@ff6d0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff6d0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC0_PERILP>;
+ clock-names = "apb_pclk";
+ };
+
+ dmac_peri: dma-controller@ff6e0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff6e0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC1_PERILP>;
+ clock-names = "apb_pclk";
+ };
+
+ pmucru: clock-controller@ff750000 {
+ compatible = "rockchip,rk3399-pmucru";
+ reg = <0x0 0xff750000 0x0 0x1000>;
+ clocks = <&xin24m>;
+ clock-names = "xin24m";
+ rockchip,grf = <&pmugrf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&pmucru PLL_PPLL>;
+ assigned-clock-rates = <676000000>;
+ };
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3399-cru";
+ reg = <0x0 0xff760000 0x0 0x1000>;
+ clocks = <&xin24m>;
+ clock-names = "xin24m";
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks =
+ <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+ <&cru PLL_NPLL>,
+ <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+ <&cru PCLK_PERIHP>,
+ <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+ <&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+ <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+ <&cru ACLK_VIO>, <&cru ACLK_HDCP>,
+ <&cru ACLK_GIC_PRE>,
+ <&cru PCLK_DDR>,
+ <&cru ACLK_VDU>;
+ assigned-clock-rates =
+ <594000000>, <800000000>,
+ <1000000000>,
+ <150000000>, <75000000>,
+ <37500000>,
+ <100000000>, <100000000>,
+ <50000000>, <600000000>,
+ <100000000>, <50000000>,
+ <400000000>, <400000000>,
+ <200000000>,
+ <200000000>,
+ <400000000>;
+ };
+
+ grf: syscon@ff770000 {
+ compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xff770000 0x0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ io_domains: io-domains {
+ compatible = "rockchip,rk3399-io-voltage-domain";
+ status = "disabled";
+ };
+
+ mipi_dphy_rx0: mipi-dphy-rx0 {
+ compatible = "rockchip,rk3399-mipi-dphy-rx0";
+ clocks = <&cru SCLK_MIPIDPHY_REF>,
+ <&cru SCLK_DPHY_RX0_CFG>,
+ <&cru PCLK_VIO_GRF>;
+ clock-names = "dphy-ref", "dphy-cfg", "grf";
+ power-domains = <&power RK3399_PD_VIO>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy0: usb2phy@e450 {
+ compatible = "rockchip,rk3399-usb2phy";
+ reg = <0xe450 0x10>;
+ clocks = <&cru SCLK_USB2PHY0_REF>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ clock-output-names = "clk_usbphy0_480m";
+ status = "disabled";
+
+ u2phy0_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+
+ u2phy0_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ status = "disabled";
+ };
+ };
+
+ u2phy1: usb2phy@e460 {
+ compatible = "rockchip,rk3399-usb2phy";
+ reg = <0xe460 0x10>;
+ clocks = <&cru SCLK_USB2PHY1_REF>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ clock-output-names = "clk_usbphy1_480m";
+ status = "disabled";
+
+ u2phy1_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+
+ u2phy1_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ status = "disabled";
+ };
+ };
+
+ emmc_phy: phy@f780 {
+ compatible = "rockchip,rk3399-emmc-phy";
+ reg = <0xf780 0x24>;
+ clocks = <&sdhci>;
+ clock-names = "emmcclk";
+ drive-impedance-ohm = <50>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ pcie_phy: pcie-phy {
+ compatible = "rockchip,rk3399-pcie-phy";
+ clocks = <&cru SCLK_PCIEPHY_REF>;
+ clock-names = "refclk";
+ #phy-cells = <1>;
+ resets = <&cru SRST_PCIEPHY>;
+ reset-names = "phy";
+ status = "disabled";
+ };
+ };
+
+ tcphy0: phy@ff7c0000 {
+ compatible = "rockchip,rk3399-typec-phy";
+ reg = <0x0 0xff7c0000 0x0 0x40000>;
+ clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+ <&cru SCLK_UPHY0_TCPDPHY_REF>;
+ clock-names = "tcpdcore", "tcpdphy-ref";
+ assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+ assigned-clock-rates = <50000000>;
+ power-domains = <&power RK3399_PD_TCPD0>;
+ resets = <&cru SRST_UPHY0>,
+ <&cru SRST_UPHY0_PIPE_L00>,
+ <&cru SRST_P_UPHY0_TCPHY>;
+ reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ tcphy0_dp: dp-port {
+ #phy-cells = <0>;
+ };
+
+ tcphy0_usb3: usb3-port {
+ #phy-cells = <0>;
+ };
+ };
+
+ tcphy1: phy@ff800000 {
+ compatible = "rockchip,rk3399-typec-phy";
+ reg = <0x0 0xff800000 0x0 0x40000>;
+ clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+ <&cru SCLK_UPHY1_TCPDPHY_REF>;
+ clock-names = "tcpdcore", "tcpdphy-ref";
+ assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+ assigned-clock-rates = <50000000>;
+ power-domains = <&power RK3399_PD_TCPD1>;
+ resets = <&cru SRST_UPHY1>,
+ <&cru SRST_UPHY1_PIPE_L00>,
+ <&cru SRST_P_UPHY1_TCPHY>;
+ reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ tcphy1_dp: dp-port {
+ #phy-cells = <0>;
+ };
+
+ tcphy1_usb3: usb3-port {
+ #phy-cells = <0>;
+ };
+ };
+
+ watchdog@ff848000 {
+ compatible = "rockchip,rk3399-wdt", "snps,dw-wdt";
+ reg = <0x0 0xff848000 0x0 0x100>;
+ clocks = <&cru PCLK_WDT>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ rktimer: rktimer@ff850000 {
+ compatible = "rockchip,rk3399-timer";
+ reg = <0x0 0xff850000 0x0 0x1000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+ clock-names = "pclk", "timer";
+ };
+
+ spdif: spdif@ff870000 {
+ compatible = "rockchip,rk3399-spdif";
+ reg = <0x0 0xff870000 0x0 0x1000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_bus 7>;
+ dma-names = "tx";
+ clock-names = "mclk", "hclk";
+ clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_bus>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s0: i2s@ff880000 {
+ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff880000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_bus 0>, <&dmac_bus 1>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
+ pinctrl-names = "bclk_on", "bclk_off";
+ pinctrl-0 = <&i2s0_8ch_bus>;
+ pinctrl-1 = <&i2s0_8ch_bus_bclk_off>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s1: i2s@ff890000 {
+ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff890000 0x0 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_bus 2>, <&dmac_bus 3>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_2ch_bus>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s2: i2s@ff8a0000 {
+ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff8a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_bus 4>, <&dmac_bus 5>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ vopl: vop@ff8f0000 {
+ compatible = "rockchip,rk3399-vop-lit";
+ reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+ assigned-clock-rates = <400000000>, <100000000>;
+ clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ iommus = <&vopl_mmu>;
+ power-domains = <&power RK3399_PD_VOPL>;
+ resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vopl_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vopl_out_mipi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mipi_in_vopl>;
+ };
+
+ vopl_out_edp: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&edp_in_vopl>;
+ };
+
+ vopl_out_hdmi: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&hdmi_in_vopl>;
+ };
+
+ vopl_out_mipi1: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&mipi1_in_vopl>;
+ };
+
+ vopl_out_dp: endpoint@4 {
+ reg = <4>;
+ remote-endpoint = <&dp_in_vopl>;
+ };
+ };
+ };
+
+ vopl_mmu: iommu@ff8f3f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff8f3f00 0x0 0x100>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+ clock-names = "aclk", "iface";
+ power-domains = <&power RK3399_PD_VOPL>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vopb: vop@ff900000 {
+ compatible = "rockchip,rk3399-vop-big";
+ reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+ assigned-clock-rates = <400000000>, <100000000>;
+ clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ iommus = <&vopb_mmu>;
+ power-domains = <&power RK3399_PD_VOPB>;
+ resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vopb_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vopb_out_edp: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&edp_in_vopb>;
+ };
+
+ vopb_out_mipi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_in_vopb>;
+ };
+
+ vopb_out_hdmi: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&hdmi_in_vopb>;
+ };
+
+ vopb_out_mipi1: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&mipi1_in_vopb>;
+ };
+
+ vopb_out_dp: endpoint@4 {
+ reg = <4>;
+ remote-endpoint = <&dp_in_vopb>;
+ };
+ };
+ };
+
+ vopb_mmu: iommu@ff903f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff903f00 0x0 0x100>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+ clock-names = "aclk", "iface";
+ power-domains = <&power RK3399_PD_VOPB>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ isp0: isp0@ff910000 {
+ compatible = "rockchip,rk3399-cif-isp";
+ reg = <0x0 0xff910000 0x0 0x4000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_ISP0>,
+ <&cru ACLK_ISP0_WRAPPER>,
+ <&cru HCLK_ISP0_WRAPPER>;
+ clock-names = "isp", "aclk", "hclk";
+ iommus = <&isp0_mmu>;
+ phys = <&mipi_dphy_rx0>;
+ phy-names = "dphy";
+ power-domains = <&power RK3399_PD_ISP0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ isp0_mmu: iommu@ff914000 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3399_PD_ISP0>;
+ rockchip,disable-mmu-reset;
+ };
+
+ isp1: isp1@ff920000 {
+ compatible = "rockchip,rk3399-cif-isp";
+ reg = <0x0 0xff920000 0x0 0x4000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_ISP1>,
+ <&cru ACLK_ISP1_WRAPPER>,
+ <&cru HCLK_ISP1_WRAPPER>;
+ clock-names = "isp", "aclk", "hclk";
+ iommus = <&isp1_mmu>;
+ phys = <&mipi_dsi1>;
+ phy-names = "dphy";
+ power-domains = <&power RK3399_PD_ISP1>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ isp1_mmu: iommu@ff924000 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3399_PD_ISP1>;
+ rockchip,disable-mmu-reset;
+ };
+
+ hdmi_sound: hdmi-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "hdmi-sound";
+ status = "disabled";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s2>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+ };
+
+ hdmi: hdmi@ff940000 {
+ compatible = "rockchip,rk3399-dw-hdmi";
+ reg = <0x0 0xff940000 0x0 0x20000>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_HDMI_CTRL>,
+ <&cru SCLK_HDMI_SFR>,
+ <&cru SCLK_HDMI_CEC>,
+ <&cru PCLK_VIO_GRF>,
+ <&cru PLL_VPLL>;
+ clock-names = "iahb", "isfr", "cec", "grf", "ref";
+ power-domains = <&power RK3399_PD_HDCP>;
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_hdmi>;
+ };
+ hdmi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ mipi_dsi: dsi@ff960000 {
+ compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0x0 0xff960000 0x0 0x8000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
+ <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
+ clock-names = "ref", "pclk", "phy_cfg", "grf";
+ power-domains = <&power RK3399_PD_VIO>;
+ resets = <&cru SRST_P_MIPI_DSI0>;
+ reset-names = "apb";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+
+ mipi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+
+ mipi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ mipi_dsi1: dsi@ff968000 {
+ compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0x0 0xff968000 0x0 0x8000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>,
+ <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>;
+ clock-names = "ref", "pclk", "phy_cfg", "grf";
+ power-domains = <&power RK3399_PD_VIO>;
+ resets = <&cru SRST_P_MIPI_DSI1>;
+ reset-names = "apb";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi1_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi1_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi1>;
+ };
+
+ mipi1_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi1>;
+ };
+ };
+
+ mipi1_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ edp: dp@ff970000 {
+ compatible = "rockchip,rk3399-edp";
+ reg = <0x0 0xff970000 0x0 0x8000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
+ clock-names = "dp", "pclk", "grf";
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_hpd>;
+ power-domains = <&power RK3399_PD_EDP>;
+ resets = <&cru SRST_P_EDP_CTRL>;
+ reset-names = "dp";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_edp>;
+ };
+
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ gpu: gpu@ff9a0000 {
+ compatible = "rockchip,rk3399-mali", "arm,mali-t860";
+ reg = <0x0 0xff9a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&cru ACLK_GPU>;
+ #cooling-cells = <2>;
+ dynamic-power-coefficient = <2640>;
+ power-domains = <&power RK3399_PD_GPU>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3399-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio0: gpio@ff720000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff720000 0x0 0x100>;
+ clocks = <&pmucru PCLK_GPIO0_PMU>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio1: gpio@ff730000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff730000 0x0 0x100>;
+ clocks = <&pmucru PCLK_GPIO1_PMU>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio2: gpio@ff780000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff780000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO2>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio3: gpio@ff788000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff788000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO3>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio4: gpio@ff790000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff790000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_none_13ma: pcfg-pull-none-13ma {
+ bias-disable;
+ drive-strength = <13>;
+ };
+
+ pcfg_pull_none_18ma: pcfg-pull-none-18ma {
+ bias-disable;
+ drive-strength = <18>;
+ };
+
+ pcfg_pull_none_20ma: pcfg-pull-none-20ma {
+ bias-disable;
+ drive-strength = <20>;
+ };
+
+ pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_18ma: pcfg-pull-up-18ma {
+ bias-pull-up;
+ drive-strength = <18>;
+ };
+
+ pcfg_pull_up_20ma: pcfg-pull-up-20ma {
+ bias-pull-up;
+ drive-strength = <20>;
+ };
+
+ pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+ bias-pull-down;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_down_8ma: pcfg-pull-down-8ma {
+ bias-pull-down;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_down_12ma: pcfg-pull-down-12ma {
+ bias-pull-down;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_down_18ma: pcfg-pull-down-18ma {
+ bias-pull-down;
+ drive-strength = <18>;
+ };
+
+ pcfg_pull_down_20ma: pcfg-pull-down-20ma {
+ bias-pull-down;
+ drive-strength = <20>;
+ };
+
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ pcfg_input_enable: pcfg-input-enable {
+ input-enable;
+ };
+
+ pcfg_input_pull_up: pcfg-input-pull-up {
+ input-enable;
+ bias-pull-up;
+ };
+
+ pcfg_input_pull_down: pcfg-input-pull-down {
+ input-enable;
+ bias-pull-down;
+ };
+
+ clock {
+ clk_32k: clk-32k {
+ rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+ };
+ };
+
+ cif {
+ cif_clkin: cif-clkin {
+ rockchip,pins =
+ <2 RK_PB2 3 &pcfg_pull_none>;
+ };
+
+ cif_clkouta: cif-clkouta {
+ rockchip,pins =
+ <2 RK_PB3 3 &pcfg_pull_none>;
+ };
+ };
+
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins =
+ <4 RK_PC7 2 &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ rgmii_pins: rgmii-pins {
+ rockchip,pins =
+ /* mac_txclk */
+ <3 RK_PC1 1 &pcfg_pull_none_13ma>,
+ /* mac_rxclk */
+ <3 RK_PB6 1 &pcfg_pull_none>,
+ /* mac_mdio */
+ <3 RK_PB5 1 &pcfg_pull_none>,
+ /* mac_txen */
+ <3 RK_PB4 1 &pcfg_pull_none_13ma>,
+ /* mac_clk */
+ <3 RK_PB3 1 &pcfg_pull_none>,
+ /* mac_rxdv */
+ <3 RK_PB1 1 &pcfg_pull_none>,
+ /* mac_mdc */
+ <3 RK_PB0 1 &pcfg_pull_none>,
+ /* mac_rxd1 */
+ <3 RK_PA7 1 &pcfg_pull_none>,
+ /* mac_rxd0 */
+ <3 RK_PA6 1 &pcfg_pull_none>,
+ /* mac_txd1 */
+ <3 RK_PA5 1 &pcfg_pull_none_13ma>,
+ /* mac_txd0 */
+ <3 RK_PA4 1 &pcfg_pull_none_13ma>,
+ /* mac_rxd3 */
+ <3 RK_PA3 1 &pcfg_pull_none>,
+ /* mac_rxd2 */
+ <3 RK_PA2 1 &pcfg_pull_none>,
+ /* mac_txd3 */
+ <3 RK_PA1 1 &pcfg_pull_none_13ma>,
+ /* mac_txd2 */
+ <3 RK_PA0 1 &pcfg_pull_none_13ma>;
+ };
+
+ rmii_pins: rmii-pins {
+ rockchip,pins =
+ /* mac_mdio */
+ <3 RK_PB5 1 &pcfg_pull_none>,
+ /* mac_txen */
+ <3 RK_PB4 1 &pcfg_pull_none_13ma>,
+ /* mac_clk */
+ <3 RK_PB3 1 &pcfg_pull_none>,
+ /* mac_rxer */
+ <3 RK_PB2 1 &pcfg_pull_none>,
+ /* mac_rxdv */
+ <3 RK_PB1 1 &pcfg_pull_none>,
+ /* mac_mdc */
+ <3 RK_PB0 1 &pcfg_pull_none>,
+ /* mac_rxd1 */
+ <3 RK_PA7 1 &pcfg_pull_none>,
+ /* mac_rxd0 */
+ <3 RK_PA6 1 &pcfg_pull_none>,
+ /* mac_txd1 */
+ <3 RK_PA5 1 &pcfg_pull_none_13ma>,
+ /* mac_txd0 */
+ <3 RK_PA4 1 &pcfg_pull_none_13ma>;
+ };
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins =
+ <1 RK_PB7 2 &pcfg_pull_none>,
+ <1 RK_PC0 2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins =
+ <4 RK_PA2 1 &pcfg_pull_none>,
+ <4 RK_PA1 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins =
+ <2 RK_PA1 2 &pcfg_pull_none_12ma>,
+ <2 RK_PA0 2 &pcfg_pull_none_12ma>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins =
+ <4 RK_PC1 1 &pcfg_pull_none>,
+ <4 RK_PC0 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c4 {
+ i2c4_xfer: i2c4-xfer {
+ rockchip,pins =
+ <1 RK_PB4 1 &pcfg_pull_none>,
+ <1 RK_PB3 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c5 {
+ i2c5_xfer: i2c5-xfer {
+ rockchip,pins =
+ <3 RK_PB3 2 &pcfg_pull_none>,
+ <3 RK_PB2 2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c6 {
+ i2c6_xfer: i2c6-xfer {
+ rockchip,pins =
+ <2 RK_PB2 2 &pcfg_pull_none>,
+ <2 RK_PB1 2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c7 {
+ i2c7_xfer: i2c7-xfer {
+ rockchip,pins =
+ <2 RK_PB0 2 &pcfg_pull_none>,
+ <2 RK_PA7 2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c8 {
+ i2c8_xfer: i2c8-xfer {
+ rockchip,pins =
+ <1 RK_PC5 1 &pcfg_pull_none>,
+ <1 RK_PC4 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s0 {
+ i2s0_2ch_bus: i2s0-2ch-bus {
+ rockchip,pins =
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>,
+ <4 RK_PA0 1 &pcfg_pull_none>;
+ };
+
+ i2s0_2ch_bus_bclk_off: i2s0-2ch-bus-bclk-off {
+ rockchip,pins =
+ <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>,
+ <4 RK_PA0 1 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_bus: i2s0-8ch-bus {
+ rockchip,pins =
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD4 1 &pcfg_pull_none>,
+ <3 RK_PD5 1 &pcfg_pull_none>,
+ <3 RK_PD6 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>,
+ <4 RK_PA0 1 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off {
+ rockchip,pins =
+ <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD4 1 &pcfg_pull_none>,
+ <3 RK_PD5 1 &pcfg_pull_none>,
+ <3 RK_PD6 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>,
+ <4 RK_PA0 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s1 {
+ i2s1_2ch_bus: i2s1-2ch-bus {
+ rockchip,pins =
+ <4 RK_PA3 1 &pcfg_pull_none>,
+ <4 RK_PA4 1 &pcfg_pull_none>,
+ <4 RK_PA5 1 &pcfg_pull_none>,
+ <4 RK_PA6 1 &pcfg_pull_none>,
+ <4 RK_PA7 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off {
+ rockchip,pins =
+ <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PA4 1 &pcfg_pull_none>,
+ <4 RK_PA5 1 &pcfg_pull_none>,
+ <4 RK_PA6 1 &pcfg_pull_none>,
+ <4 RK_PA7 1 &pcfg_pull_none>;
+ };
+ };
+
+ sdio0 {
+ sdio0_bus1: sdio0-bus1 {
+ rockchip,pins =
+ <2 RK_PC4 1 &pcfg_pull_up>;
+ };
+
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins =
+ <2 RK_PC4 1 &pcfg_pull_up>,
+ <2 RK_PC5 1 &pcfg_pull_up>,
+ <2 RK_PC6 1 &pcfg_pull_up>,
+ <2 RK_PC7 1 &pcfg_pull_up>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins =
+ <2 RK_PD0 1 &pcfg_pull_up>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins =
+ <2 RK_PD1 1 &pcfg_pull_none>;
+ };
+
+ sdio0_cd: sdio0-cd {
+ rockchip,pins =
+ <2 RK_PD2 1 &pcfg_pull_up>;
+ };
+
+ sdio0_pwr: sdio0-pwr {
+ rockchip,pins =
+ <2 RK_PD3 1 &pcfg_pull_up>;
+ };
+
+ sdio0_bkpwr: sdio0-bkpwr {
+ rockchip,pins =
+ <2 RK_PD4 1 &pcfg_pull_up>;
+ };
+
+ sdio0_wp: sdio0-wp {
+ rockchip,pins =
+ <0 RK_PA3 1 &pcfg_pull_up>;
+ };
+
+ sdio0_int: sdio0-int {
+ rockchip,pins =
+ <0 RK_PA4 1 &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <4 RK_PB0 1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <4 RK_PB0 1 &pcfg_pull_up>,
+ <4 RK_PB1 1 &pcfg_pull_up>,
+ <4 RK_PB2 1 &pcfg_pull_up>,
+ <4 RK_PB3 1 &pcfg_pull_up>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <4 RK_PB4 1 &pcfg_pull_none>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <4 RK_PB5 1 &pcfg_pull_up>;
+ };
+
+ sdmmc_cd: sdmmc-cd {
+ rockchip,pins =
+ <0 RK_PA7 1 &pcfg_pull_up>;
+ };
+
+ sdmmc_wp: sdmmc-wp {
+ rockchip,pins =
+ <0 RK_PB0 1 &pcfg_pull_up>;
+ };
+ };
+
+ suspend {
+ ap_pwroff: ap-pwroff {
+ rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
+ };
+
+ ddrio_pwroff: ddrio-pwroff {
+ rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
+ };
+ };
+
+ spdif {
+ spdif_bus: spdif-bus {
+ rockchip,pins =
+ <4 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ spdif_bus_1: spdif-bus-1 {
+ rockchip,pins =
+ <3 RK_PC0 3 &pcfg_pull_none>;
+ };
+ };
+
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins =
+ <3 RK_PA6 2 &pcfg_pull_up>;
+ };
+ spi0_cs0: spi0-cs0 {
+ rockchip,pins =
+ <3 RK_PA7 2 &pcfg_pull_up>;
+ };
+ spi0_cs1: spi0-cs1 {
+ rockchip,pins =
+ <3 RK_PB0 2 &pcfg_pull_up>;
+ };
+ spi0_tx: spi0-tx {
+ rockchip,pins =
+ <3 RK_PA5 2 &pcfg_pull_up>;
+ };
+ spi0_rx: spi0-rx {
+ rockchip,pins =
+ <3 RK_PA4 2 &pcfg_pull_up>;
+ };
+ };
+
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins =
+ <1 RK_PB1 2 &pcfg_pull_up>;
+ };
+ spi1_cs0: spi1-cs0 {
+ rockchip,pins =
+ <1 RK_PB2 2 &pcfg_pull_up>;
+ };
+ spi1_rx: spi1-rx {
+ rockchip,pins =
+ <1 RK_PA7 2 &pcfg_pull_up>;
+ };
+ spi1_tx: spi1-tx {
+ rockchip,pins =
+ <1 RK_PB0 2 &pcfg_pull_up>;
+ };
+ };
+
+ spi2 {
+ spi2_clk: spi2-clk {
+ rockchip,pins =
+ <2 RK_PB3 1 &pcfg_pull_up>;
+ };
+ spi2_cs0: spi2-cs0 {
+ rockchip,pins =
+ <2 RK_PB4 1 &pcfg_pull_up>;
+ };
+ spi2_rx: spi2-rx {
+ rockchip,pins =
+ <2 RK_PB1 1 &pcfg_pull_up>;
+ };
+ spi2_tx: spi2-tx {
+ rockchip,pins =
+ <2 RK_PB2 1 &pcfg_pull_up>;
+ };
+ };
+
+ spi3 {
+ spi3_clk: spi3-clk {
+ rockchip,pins =
+ <1 RK_PC1 1 &pcfg_pull_up>;
+ };
+ spi3_cs0: spi3-cs0 {
+ rockchip,pins =
+ <1 RK_PC2 1 &pcfg_pull_up>;
+ };
+ spi3_rx: spi3-rx {
+ rockchip,pins =
+ <1 RK_PB7 1 &pcfg_pull_up>;
+ };
+ spi3_tx: spi3-tx {
+ rockchip,pins =
+ <1 RK_PC0 1 &pcfg_pull_up>;
+ };
+ };
+
+ spi4 {
+ spi4_clk: spi4-clk {
+ rockchip,pins =
+ <3 RK_PA2 2 &pcfg_pull_up>;
+ };
+ spi4_cs0: spi4-cs0 {
+ rockchip,pins =
+ <3 RK_PA3 2 &pcfg_pull_up>;
+ };
+ spi4_rx: spi4-rx {
+ rockchip,pins =
+ <3 RK_PA0 2 &pcfg_pull_up>;
+ };
+ spi4_tx: spi4-tx {
+ rockchip,pins =
+ <3 RK_PA1 2 &pcfg_pull_up>;
+ };
+ };
+
+ spi5 {
+ spi5_clk: spi5-clk {
+ rockchip,pins =
+ <2 RK_PC6 2 &pcfg_pull_up>;
+ };
+ spi5_cs0: spi5-cs0 {
+ rockchip,pins =
+ <2 RK_PC7 2 &pcfg_pull_up>;
+ };
+ spi5_rx: spi5-rx {
+ rockchip,pins =
+ <2 RK_PC4 2 &pcfg_pull_up>;
+ };
+ spi5_tx: spi5-tx {
+ rockchip,pins =
+ <2 RK_PC5 2 &pcfg_pull_up>;
+ };
+ };
+
+ testclk {
+ test_clkout0: test-clkout0 {
+ rockchip,pins =
+ <0 RK_PA0 1 &pcfg_pull_none>;
+ };
+
+ test_clkout1: test-clkout1 {
+ rockchip,pins =
+ <2 RK_PD1 2 &pcfg_pull_none>;
+ };
+
+ test_clkout2: test-clkout2 {
+ rockchip,pins =
+ <0 RK_PB0 3 &pcfg_pull_none>;
+ };
+ };
+
+ tsadc {
+ otp_pin: otp-pin {
+ rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otp_out: otp-out {
+ rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins =
+ <2 RK_PC0 1 &pcfg_pull_up>,
+ <2 RK_PC1 1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins =
+ <2 RK_PC2 1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins =
+ <2 RK_PC3 1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins =
+ <3 RK_PB4 2 &pcfg_pull_up>,
+ <3 RK_PB5 2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2a {
+ uart2a_xfer: uart2a-xfer {
+ rockchip,pins =
+ <4 RK_PB0 2 &pcfg_pull_up>,
+ <4 RK_PB1 2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2b {
+ uart2b_xfer: uart2b-xfer {
+ rockchip,pins =
+ <4 RK_PC0 2 &pcfg_pull_up>,
+ <4 RK_PC1 2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2c {
+ uart2c_xfer: uart2c-xfer {
+ rockchip,pins =
+ <4 RK_PC3 1 &pcfg_pull_up>,
+ <4 RK_PC4 1 &pcfg_pull_none>;
+ };
+ };
+
+ uart3 {
+ uart3_xfer: uart3-xfer {
+ rockchip,pins =
+ <3 RK_PB6 2 &pcfg_pull_up>,
+ <3 RK_PB7 2 &pcfg_pull_none>;
+ };
+
+ uart3_cts: uart3-cts {
+ rockchip,pins =
+ <3 RK_PC0 2 &pcfg_pull_none>;
+ };
+
+ uart3_rts: uart3-rts {
+ rockchip,pins =
+ <3 RK_PC1 2 &pcfg_pull_none>;
+ };
+ };
+
+ uart4 {
+ uart4_xfer: uart4-xfer {
+ rockchip,pins =
+ <1 RK_PA7 1 &pcfg_pull_up>,
+ <1 RK_PB0 1 &pcfg_pull_none>;
+ };
+ };
+
+ uarthdcp {
+ uarthdcp_xfer: uarthdcp-xfer {
+ rockchip,pins =
+ <4 RK_PC5 2 &pcfg_pull_up>,
+ <4 RK_PC6 2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins =
+ <4 RK_PC2 1 &pcfg_pull_none>;
+ };
+
+ pwm0_pin_pull_down: pwm0-pin-pull-down {
+ rockchip,pins =
+ <4 RK_PC2 1 &pcfg_pull_down>;
+ };
+
+ vop0_pwm_pin: vop0-pwm-pin {
+ rockchip,pins =
+ <4 RK_PC2 2 &pcfg_pull_none>;
+ };
+
+ vop1_pwm_pin: vop1-pwm-pin {
+ rockchip,pins =
+ <4 RK_PC2 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins =
+ <4 RK_PC6 1 &pcfg_pull_none>;
+ };
+
+ pwm1_pin_pull_down: pwm1-pin-pull-down {
+ rockchip,pins =
+ <4 RK_PC6 1 &pcfg_pull_down>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins =
+ <1 RK_PC3 1 &pcfg_pull_none>;
+ };
+
+ pwm2_pin_pull_down: pwm2-pin-pull-down {
+ rockchip,pins =
+ <1 RK_PC3 1 &pcfg_pull_down>;
+ };
+ };
+
+ pwm3a {
+ pwm3a_pin: pwm3a-pin {
+ rockchip,pins =
+ <0 RK_PA6 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3b {
+ pwm3b_pin: pwm3b-pin {
+ rockchip,pins =
+ <1 RK_PB6 1 &pcfg_pull_none>;
+ };
+ };
+
+ hdmi {
+ hdmi_i2c_xfer: hdmi-i2c-xfer {
+ rockchip,pins =
+ <4 RK_PC1 3 &pcfg_pull_none>,
+ <4 RK_PC0 3 &pcfg_pull_none>;
+ };
+
+ hdmi_cec: hdmi-cec {
+ rockchip,pins =
+ <4 RK_PC7 1 &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie_clkreqn_cpm: pci-clkreqn-cpm {
+ rockchip,pins =
+ <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_clkreqnb_cpm: pci-clkreqnb-cpm {
+ rockchip,pins =
+ <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ };
+};
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/usb/pd.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "OPEN AI LAB EAIDK-610";
status = "okay";
rt5651: audio-codec@1a {
- compatible = "rockchip,rt5651";
+ compatible = "realtek,rt5651";
reg = <0x1a>;
clocks = <&cru SCLK_I2S_8CH_OUT>;
clock-names = "mclk";
/dts-v1/;
#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
+#include "rk3399-base.dtsi"
/ {
model = "Rockchip RK3399 Evaluation Board";
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/usb/pd.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Firefly-RK3399 Board";
*/
#include <dt-bindings/input/input.h>
-#include "rk3399.dtsi"
-#include "rk3399-op1-opp.dtsi"
+#include "rk3399-op1.dtsi"
/ {
aliases {
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Hugsun X99 TV BOX";
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
aliases {
/dts-v1/;
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Kobol Helios64";
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Leez RK3399 P710";
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
aliases {
* Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
*/
+#include "rk3399.dtsi"
+
/ {
cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-/ {
- cluster0_opp: opp-table-0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp00 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <825000 825000 1250000>;
- clock-latency-ns = <40000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <825000 825000 1250000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <850000 850000 1250000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <925000 925000 1250000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1000000 1000000 1250000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1125000 1125000 1250000>;
- };
- };
-
- cluster1_opp: opp-table-1 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp00 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <825000 825000 1250000>;
- clock-latency-ns = <40000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <825000 825000 1250000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <825000 825000 1250000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <875000 875000 1250000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <950000 950000 1250000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1025000 1025000 1250000>;
- };
- opp06 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <1100000 1100000 1250000>;
- };
- opp07 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1200000 1200000 1250000>;
- };
- };
-
- gpu_opp_table: opp-table-2 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <825000 825000 1150000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <297000000>;
- opp-microvolt = <825000 825000 1150000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <825000 825000 1150000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <875000 875000 1150000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <925000 925000 1150000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = <1100000 1100000 1150000>;
- };
- };
-};
-
-&cpu_l0 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l1 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l2 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l3 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_b0 {
- operating-points-v2 = <&cluster1_opp>;
-};
-
-&cpu_b1 {
- operating-points-v2 = <&cluster1_opp>;
-};
-
-&gpu {
- operating-points-v2 = <&gpu_opp_table>;
-};
#include <dt-bindings/interrupt-controller/irq.h>
#include "dt-bindings/usb/pd.h"
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Orange Pi RK3399 Board";
#include <dt-bindings/usb/pd.h>
#include <dt-bindings/leds/common.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Pine64 Pinebook Pro";
backlight: edp-backlight {
compatible = "pwm-backlight";
power-supply = <&vcc_12v>;
- pwms = <&pwm0 0 740740 0>;
+ pwms = <&pwm0 0 125000 0>;
};
bat: battery {
compatible = "simple-battery";
- charge-full-design-microamp-hours = <9800000>;
+ charge-full-design-microamp-hours = <10000000>;
voltage-max-design-microvolt = <4350000>;
voltage-min-design-microvolt = <3000000>;
};
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Pine64 PinePhone Pro";
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc3v3_sys>;
gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
};
/* MIPI DSI panel 2.8v supply */
regulator-max-microvolt = <2800000>;
vin-supply = <&vcc3v3_sys>;
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
};
vibrator {
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
aliases {
es8388: es8388@11 {
compatible = "everest,es8388";
reg = <0x11>;
- clock-names = "mclk";
clocks = <&cru SCLK_I2S_8CH_OUT>;
#sound-dai-cells = <0>;
};
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Firefly ROC-RK3399-PC Board";
/dts-v1/;
#include <dt-bindings/leds/common.h>
-#include "rk3399.dtsi"
-#include "rk3399-t-opp.dtsi"
+#include "rk3399-t.dtsi"
/ {
model = "Radxa ROCK 4C+";
};
};
+ rk809-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Analog RK809";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rk809>;
+ };
+ };
+
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk809 1>;
interrupt-parent = <&gpio1>;
interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
+ clock-names = "mclk";
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
clock-output-names = "rk808-clkout1", "rk808-clkout2";
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
+ pinctrl-0 = <&pmic_int_l>, <&i2s_8ch_mclk>;
rockchip,system-power-controller;
+ #sound-dai-cells = <0>;
wakeup-source;
vcc1-supply = <&vcc5v0_sys>;
status = "okay";
};
+&i2s0 {
+ status = "okay";
+};
+
+&i2s0_8ch_bus {
+ rockchip,pins =
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>;
+};
+
+&i2s0_8ch_bus_bclk_off {
+ rockchip,pins =
+ <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>;
+};
+
&i2s2 {
status = "okay";
};
};
};
+ i2s0 {
+ i2s_8ch_mclk: i2s-8ch-mclk {
+ rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
+ };
+ };
+
leds {
user_led1: user-led1 {
rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
*/
/dts-v1/;
+#include "rk3399-t.dtsi"
#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-t-opp.dtsi"
/ {
model = "Radxa ROCK 4SE";
};
};
-&pinctrl {
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
&sdio0 {
status = "okay";
vddio-supply = <&vcc_1v8>;
};
};
-
-&vcc5v0_host {
- enable-active-high;
- gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
-};
* Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
*/
-/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
/ {
aliases {
*/
/dts-v1/;
+#include "rk3399-op1.dtsi"
#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-op1-opp.dtsi"
/ {
model = "Radxa ROCK Pi 4A+";
*/
/dts-v1/;
+#include "rk3399.dtsi"
#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Radxa ROCK Pi 4A";
*/
/dts-v1/;
+#include "rk3399-op1.dtsi"
#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-op1-opp.dtsi"
/ {
model = "Radxa ROCK Pi 4B+";
*/
/dts-v1/;
+#include "rk3399.dtsi"
#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Radxa ROCK Pi 4B";
*/
/dts-v1/;
+#include "rk3399.dtsi"
#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-opp.dtsi"
/ {
model = "Radxa ROCK Pi 4C";
* Copyright (c) 2018 Linaro Ltd.
*/
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
+#include "rk3399.dtsi"
/ {
aliases {
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk808 1>;
- clock-names = "ext_clock";
+ clock-names = "txco";
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
aliases {
status = "okay";
rt5651: rt5651@1a {
- compatible = "rockchip,rt5651";
+ compatible = "realtek,rt5651";
reg = <0x1a>;
clocks = <&cru SCLK_I2S_8CH_OUT>;
clock-names = "mclk";
#include "dt-bindings/pwm/pwm.h"
#include "dt-bindings/input/input.h"
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
/ {
compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
* Copyright (c) 2022 Radxa Limited
*/
+#include "rk3399-base.dtsi"
+
/ {
cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
*/
-#include <dt-bindings/clock/rk3399-cru.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/power/rk3399-power.h>
-#include <dt-bindings/thermal/thermal.h>
+#include "rk3399-base.dtsi"
/ {
- compatible = "rockchip,rk3399";
+ cluster0_opp: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
- gpio4 = &gpio4;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c7;
- i2c8 = &i2c8;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- spi0 = &spi0;
- spi1 = &spi1;
- spi2 = &spi2;
- spi3 = &spi3;
- spi4 = &spi4;
- spi5 = &spi5;
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu-map {
- cluster0 { /* Cortex-A53 */
- core0 {
- cpu = <&cpu_l0>;
- };
- core1 {
- cpu = <&cpu_l1>;
- };
- core2 {
- cpu = <&cpu_l2>;
- };
- core3 {
- cpu = <&cpu_l3>;
- };
- };
-
- cluster1 { /* Cortex-A72 */
- core0 {
- cpu = <&cpu_b0>;
- };
- core1 {
- cpu = <&cpu_b1>;
- };
- };
- };
-
- cpu_l0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- enable-method = "psci";
- capacity-dmips-mhz = <485>;
- clocks = <&cru ARMCLKL>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <100>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&l2_cache_l>;
- };
-
- cpu_l1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- enable-method = "psci";
- capacity-dmips-mhz = <485>;
- clocks = <&cru ARMCLKL>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <100>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&l2_cache_l>;
- };
-
- cpu_l2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x2>;
- enable-method = "psci";
- capacity-dmips-mhz = <485>;
- clocks = <&cru ARMCLKL>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <100>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&l2_cache_l>;
- };
-
- cpu_l3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x3>;
- enable-method = "psci";
- capacity-dmips-mhz = <485>;
- clocks = <&cru ARMCLKL>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <100>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&l2_cache_l>;
- };
-
- cpu_b0: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <0x0 0x100>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- clocks = <&cru ARMCLKB>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <436>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- i-cache-size = <0xC000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <256>;
- next-level-cache = <&l2_cache_b>;
-
- thermal-idle {
- #cooling-cells = <2>;
- duration-us = <10000>;
- exit-latency-us = <500>;
- };
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <825000 825000 1250000>;
+ clock-latency-ns = <40000>;
};
-
- cpu_b1: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <0x0 0x101>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- clocks = <&cru ARMCLKB>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <436>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- i-cache-size = <0xC000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <256>;
- next-level-cache = <&l2_cache_b>;
-
- thermal-idle {
- #cooling-cells = <2>;
- duration-us = <10000>;
- exit-latency-us = <500>;
- };
- };
-
- l2_cache_l: l2-cache-cluster0 {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- cache-size = <0x80000>;
- cache-line-size = <64>;
- cache-sets = <512>;
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <825000 825000 1250000>;
};
-
- l2_cache_b: l2-cache-cluster1 {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- cache-size = <0x100000>;
- cache-line-size = <64>;
- cache-sets = <1024>;
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <850000 850000 1250000>;
};
-
- idle-states {
- entry-method = "psci";
-
- CPU_SLEEP: cpu-sleep {
- compatible = "arm,idle-state";
- local-timer-stop;
- arm,psci-suspend-param = <0x0010000>;
- entry-latency-us = <120>;
- exit-latency-us = <250>;
- min-residency-us = <900>;
- };
-
- CLUSTER_SLEEP: cluster-sleep {
- compatible = "arm,idle-state";
- local-timer-stop;
- arm,psci-suspend-param = <0x1010000>;
- entry-latency-us = <400>;
- exit-latency-us = <500>;
- min-residency-us = <2000>;
- };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <925000 925000 1250000>;
};
- };
-
- display-subsystem {
- compatible = "rockchip,display-subsystem";
- ports = <&vopl_out>, <&vopb_out>;
- };
-
- dmc: memory-controller {
- compatible = "rockchip,rk3399-dmc";
- rockchip,pmu = <&pmugrf>;
- devfreq-events = <&dfi>;
- clocks = <&cru SCLK_DDRC>;
- clock-names = "dmc_clk";
- status = "disabled";
- };
-
- pmu_a53 {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
- };
-
- pmu_a72 {
- compatible = "arm,cortex-a72-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
- arm,no-tick-in-suspend;
- };
-
- xin24m: xin24m {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xin24m";
- #clock-cells = <0>;
- };
-
- pcie0: pcie@f8000000 {
- compatible = "rockchip,rk3399-pcie";
- reg = <0x0 0xf8000000 0x0 0x2000000>,
- <0x0 0xfd000000 0x0 0x1000000>;
- reg-names = "axi-base", "apb-base";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- aspm-no-l0s;
- bus-range = <0x0 0x1f>;
- clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
- <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
- clock-names = "aclk", "aclk-perf",
- "hclk", "pm";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sys", "legacy", "client";
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie0_intc 0>,
- <0 0 0 2 &pcie0_intc 1>,
- <0 0 0 3 &pcie0_intc 2>,
- <0 0 0 4 &pcie0_intc 3>;
- max-link-speed = <1>;
- msi-map = <0x0 &its 0x0 0x1000>;
- phys = <&pcie_phy 0>, <&pcie_phy 1>,
- <&pcie_phy 2>, <&pcie_phy 3>;
- phy-names = "pcie-phy-0", "pcie-phy-1",
- "pcie-phy-2", "pcie-phy-3";
- ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
- <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
- resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
- <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
- <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
- <&cru SRST_A_PCIE>;
- reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
- "pm", "pclk", "aclk";
- status = "disabled";
-
- pcie0_intc: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1000000 1000000 1250000>;
};
- };
-
- pcie0_ep: pcie-ep@f8000000 {
- compatible = "rockchip,rk3399-pcie-ep";
- reg = <0x0 0xfd000000 0x0 0x1000000>,
- <0x0 0xfa000000 0x0 0x2000000>;
- reg-names = "apb-base", "mem-base";
- clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
- <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
- clock-names = "aclk", "aclk-perf",
- "hclk", "pm";
- max-functions = /bits/ 8 <8>;
- num-lanes = <4>;
- resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
- <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
- <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
- <&cru SRST_A_PCIE>;
- reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
- "pm", "pclk", "aclk";
- phys = <&pcie_phy 0>, <&pcie_phy 1>,
- <&pcie_phy 2>, <&pcie_phy 3>;
- phy-names = "pcie-phy-0", "pcie-phy-1",
- "pcie-phy-2", "pcie-phy-3";
- rockchip,max-outbound-regions = <32>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqnb_cpm>;
- status = "disabled";
- };
-
- gmac: ethernet@fe300000 {
- compatible = "rockchip,rk3399-gmac";
- reg = <0x0 0xfe300000 0x0 0x10000>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "macirq";
- clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
- <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
- <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
- <&cru PCLK_GMAC>;
- clock-names = "stmmaceth", "mac_clk_rx",
- "mac_clk_tx", "clk_mac_ref",
- "clk_mac_refout", "aclk_mac",
- "pclk_mac";
- power-domains = <&power RK3399_PD_GMAC>;
- resets = <&cru SRST_A_GMAC>;
- reset-names = "stmmaceth";
- rockchip,grf = <&grf>;
- snps,txpbl = <0x4>;
- status = "disabled";
- };
-
- sdio0: mmc@fe310000 {
- compatible = "rockchip,rk3399-dw-mshc",
- "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xfe310000 0x0 0x4000>;
- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
- max-frequency = <150000000>;
- clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
- <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- fifo-depth = <0x100>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- resets = <&cru SRST_SDIO0>;
- reset-names = "reset";
- status = "disabled";
- };
-
- sdmmc: mmc@fe320000 {
- compatible = "rockchip,rk3399-dw-mshc",
- "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xfe320000 0x0 0x4000>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
- max-frequency = <150000000>;
- assigned-clocks = <&cru HCLK_SD>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
- <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- fifo-depth = <0x100>;
- power-domains = <&power RK3399_PD_SD>;
- resets = <&cru SRST_SDMMC>;
- reset-names = "reset";
- status = "disabled";
- };
-
- sdhci: mmc@fe330000 {
- compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
- reg = <0x0 0xfe330000 0x0 0x10000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
- arasan,soc-ctl-syscon = <&grf>;
- assigned-clocks = <&cru SCLK_EMMC>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
- clock-names = "clk_xin", "clk_ahb";
- clock-output-names = "emmc_cardclock";
- #clock-cells = <0>;
- phys = <&emmc_phy>;
- phy-names = "phy_arasan";
- power-domains = <&power RK3399_PD_EMMC>;
- disable-cqe-dcmd;
- status = "disabled";
- };
-
- usb_host0_ehci: usb@fe380000 {
- compatible = "generic-ehci";
- reg = <0x0 0xfe380000 0x0 0x20000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
- <&u2phy0>;
- phys = <&u2phy0_host>;
- phy-names = "usb";
- status = "disabled";
- };
-
- usb_host0_ohci: usb@fe3a0000 {
- compatible = "generic-ohci";
- reg = <0x0 0xfe3a0000 0x0 0x20000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
- <&u2phy0>;
- phys = <&u2phy0_host>;
- phy-names = "usb";
- status = "disabled";
- };
-
- usb_host1_ehci: usb@fe3c0000 {
- compatible = "generic-ehci";
- reg = <0x0 0xfe3c0000 0x0 0x20000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
- <&u2phy1>;
- phys = <&u2phy1_host>;
- phy-names = "usb";
- status = "disabled";
- };
-
- usb_host1_ohci: usb@fe3e0000 {
- compatible = "generic-ohci";
- reg = <0x0 0xfe3e0000 0x0 0x20000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
- <&u2phy1>;
- phys = <&u2phy1_host>;
- phy-names = "usb";
- status = "disabled";
- };
-
- debug@fe430000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe430000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_L>;
- clock-names = "apb_pclk";
- cpu = <&cpu_l0>;
- };
-
- debug@fe432000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe432000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_L>;
- clock-names = "apb_pclk";
- cpu = <&cpu_l1>;
- };
-
- debug@fe434000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe434000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_L>;
- clock-names = "apb_pclk";
- cpu = <&cpu_l2>;
- };
-
- debug@fe436000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe436000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_L>;
- clock-names = "apb_pclk";
- cpu = <&cpu_l3>;
- };
-
- debug@fe610000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe610000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_B>;
- clock-names = "apb_pclk";
- cpu = <&cpu_b0>;
- };
-
- debug@fe710000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe710000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_B>;
- clock-names = "apb_pclk";
- cpu = <&cpu_b1>;
- };
-
- usbdrd3_0: usb@fe800000 {
- compatible = "rockchip,rk3399-dwc3";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
- <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
- <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
- clock-names = "ref_clk", "suspend_clk",
- "bus_clk", "aclk_usb3_rksoc_axi_perf",
- "aclk_usb3", "grf_clk";
- resets = <&cru SRST_A_USB3_OTG0>;
- reset-names = "usb3-otg";
- status = "disabled";
-
- usbdrd_dwc3_0: usb@fe800000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xfe800000 0x0 0x100000>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
- <&cru SCLK_USB3OTG0_SUSPEND>;
- clock-names = "ref", "bus_early", "suspend";
- dr_mode = "otg";
- phys = <&u2phy0_otg>, <&tcphy0_usb3>;
- phy-names = "usb2-phy", "usb3-phy";
- phy_type = "utmi_wide";
- snps,dis_enblslpm_quirk;
- snps,dis-u2-freeclk-exists-quirk;
- snps,dis_u2_susphy_quirk;
- snps,dis-del-phy-power-chg-quirk;
- snps,dis-tx-ipgap-linecheck-quirk;
- power-domains = <&power RK3399_PD_USB3>;
- status = "disabled";
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1125000 1125000 1250000>;
};
};
- usbdrd3_1: usb@fe900000 {
- compatible = "rockchip,rk3399-dwc3";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
- <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
- <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
- clock-names = "ref_clk", "suspend_clk",
- "bus_clk", "aclk_usb3_rksoc_axi_perf",
- "aclk_usb3", "grf_clk";
- resets = <&cru SRST_A_USB3_OTG1>;
- reset-names = "usb3-otg";
- status = "disabled";
+ cluster1_opp: opp-table-1 {
+ compatible = "operating-points-v2";
+ opp-shared;
- usbdrd_dwc3_1: usb@fe900000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xfe900000 0x0 0x100000>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>,
- <&cru SCLK_USB3OTG1_SUSPEND>;
- clock-names = "ref", "bus_early", "suspend";
- dr_mode = "otg";
- phys = <&u2phy1_otg>, <&tcphy1_usb3>;
- phy-names = "usb2-phy", "usb3-phy";
- phy_type = "utmi_wide";
- snps,dis_enblslpm_quirk;
- snps,dis-u2-freeclk-exists-quirk;
- snps,dis_u2_susphy_quirk;
- snps,dis-del-phy-power-chg-quirk;
- snps,dis-tx-ipgap-linecheck-quirk;
- power-domains = <&power RK3399_PD_USB3>;
- status = "disabled";
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <825000 825000 1250000>;
+ clock-latency-ns = <40000>;
};
- };
-
- cdn_dp: dp@fec00000 {
- compatible = "rockchip,rk3399-cdn-dp";
- reg = <0x0 0xfec00000 0x0 0x100000>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
- assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>;
- assigned-clock-rates = <100000000>, <200000000>;
- clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
- <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
- clock-names = "core-clk", "pclk", "spdif", "grf";
- phys = <&tcphy0_dp>, <&tcphy1_dp>;
- power-domains = <&power RK3399_PD_HDCP>;
- resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
- <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
- reset-names = "spdif", "dptx", "apb", "core";
- rockchip,grf = <&grf>;
- #sound-dai-cells = <1>;
- status = "disabled";
-
- ports {
- dp_in: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- dp_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_dp>;
- };
-
- dp_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_dp>;
- };
- };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <825000 825000 1250000>;
};
- };
-
- gic: interrupt-controller@fee00000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interrupt-controller;
-
- reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
- <0x0 0xfef00000 0 0xc0000>, /* GICR */
- <0x0 0xfff00000 0 0x10000>, /* GICC */
- <0x0 0xfff10000 0 0x10000>, /* GICH */
- <0x0 0xfff20000 0 0x10000>; /* GICV */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
- its: msi-controller@fee20000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- #msi-cells = <1>;
- reg = <0x0 0xfee20000 0x0 0x20000>;
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <825000 825000 1250000>;
};
-
- ppi-partitions {
- ppi_cluster0: interrupt-partition-0 {
- affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
- };
-
- ppi_cluster1: interrupt-partition-1 {
- affinity = <&cpu_b0 &cpu_b1>;
- };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <875000 875000 1250000>;
};
- };
-
- saradc: saradc@ff100000 {
- compatible = "rockchip,rk3399-saradc";
- reg = <0x0 0xff100000 0x0 0x100>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
- #io-channel-cells = <1>;
- clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
- clock-names = "saradc", "apb_pclk";
- resets = <&cru SRST_P_SARADC>;
- reset-names = "saradc-apb";
- status = "disabled";
- };
-
- crypto0: crypto@ff8b0000 {
- compatible = "rockchip,rk3399-crypto";
- reg = <0x0 0xff8b0000 0x0 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>;
- clock-names = "hclk_master", "hclk_slave", "sclk";
- resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>;
- reset-names = "master", "slave", "crypto-rst";
- };
-
- crypto1: crypto@ff8b8000 {
- compatible = "rockchip,rk3399-crypto";
- reg = <0x0 0xff8b8000 0x0 0x4000>;
- interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>;
- clock-names = "hclk_master", "hclk_slave", "sclk";
- resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>;
- reset-names = "master", "slave", "crypto-rst";
- };
-
- i2c1: i2c@ff110000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff110000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C1>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@ff120000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff120000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C2>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c3: i2c@ff130000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff130000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C3>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c5: i2c@ff140000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff140000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C5>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c6: i2c@ff150000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff150000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C6>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c7: i2c@ff160000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff160000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C7>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c7_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart0: serial@ff180000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff180000 0x0 0x100>;
- clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer>;
- status = "disabled";
- };
-
- uart1: serial@ff190000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff190000 0x0 0x100>;
- clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_xfer>;
- status = "disabled";
- };
-
- uart2: serial@ff1a0000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff1a0000 0x0 0x100>;
- clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart2c_xfer>;
- status = "disabled";
- };
-
- uart3: serial@ff1b0000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff1b0000 0x0 0x100>;
- clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_xfer>;
- status = "disabled";
- };
-
- spi0: spi@ff1c0000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff1c0000 0x0 0x1000>;
- clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_peri 10>, <&dmac_peri 11>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi1: spi@ff1d0000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff1d0000 0x0 0x1000>;
- clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_peri 12>, <&dmac_peri 13>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi2: spi@ff1e0000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff1e0000 0x0 0x1000>;
- clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_peri 14>, <&dmac_peri 15>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi4: spi@ff1f0000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff1f0000 0x0 0x1000>;
- clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_peri 18>, <&dmac_peri 19>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi5: spi@ff200000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff200000 0x0 0x1000>;
- clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_bus 8>, <&dmac_bus 9>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- thermal_zones: thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <100>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsadc 0>;
-
- trips {
- cpu_alert0: cpu_alert0 {
- temperature = <70000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_alert1: cpu_alert1 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit: cpu_crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cpu_alert1>;
- cooling-device =
- <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <950000 950000 1250000>;
};
-
- gpu_thermal: gpu-thermal {
- polling-delay-passive = <100>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsadc 1>;
-
- trips {
- gpu_alert0: gpu_alert0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- gpu_crit: gpu_crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&gpu_alert0>;
- cooling-device =
- <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1025000 1025000 1250000>;
};
- };
-
- tsadc: tsadc@ff260000 {
- compatible = "rockchip,rk3399-tsadc";
- reg = <0x0 0xff260000 0x0 0x100>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
- assigned-clocks = <&cru SCLK_TSADC>;
- assigned-clock-rates = <750000>;
- clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
- clock-names = "tsadc", "apb_pclk";
- resets = <&cru SRST_TSADC>;
- reset-names = "tsadc-apb";
- rockchip,grf = <&grf>;
- rockchip,hw-tshut-temp = <95000>;
- pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&otp_pin>;
- pinctrl-1 = <&otp_out>;
- pinctrl-2 = <&otp_pin>;
- #thermal-sensor-cells = <1>;
- status = "disabled";
- };
-
- qos_emmc: qos@ffa58000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa58000 0x0 0x20>;
- };
-
- qos_gmac: qos@ffa5c000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa5c000 0x0 0x20>;
- };
-
- qos_pcie: qos@ffa60080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa60080 0x0 0x20>;
- };
-
- qos_usb_host0: qos@ffa60100 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa60100 0x0 0x20>;
- };
-
- qos_usb_host1: qos@ffa60180 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa60180 0x0 0x20>;
- };
-
- qos_usb_otg0: qos@ffa70000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa70000 0x0 0x20>;
- };
-
- qos_usb_otg1: qos@ffa70080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa70080 0x0 0x20>;
- };
-
- qos_sd: qos@ffa74000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa74000 0x0 0x20>;
- };
-
- qos_sdioaudio: qos@ffa76000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa76000 0x0 0x20>;
- };
-
- qos_hdcp: qos@ffa90000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa90000 0x0 0x20>;
- };
-
- qos_iep: qos@ffa98000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa98000 0x0 0x20>;
- };
-
- qos_isp0_m0: qos@ffaa0000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffaa0000 0x0 0x20>;
- };
-
- qos_isp0_m1: qos@ffaa0080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffaa0080 0x0 0x20>;
- };
-
- qos_isp1_m0: qos@ffaa8000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffaa8000 0x0 0x20>;
- };
-
- qos_isp1_m1: qos@ffaa8080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffaa8080 0x0 0x20>;
- };
-
- qos_rga_r: qos@ffab0000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffab0000 0x0 0x20>;
- };
-
- qos_rga_w: qos@ffab0080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffab0080 0x0 0x20>;
- };
-
- qos_video_m0: qos@ffab8000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffab8000 0x0 0x20>;
- };
-
- qos_video_m1_r: qos@ffac0000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffac0000 0x0 0x20>;
- };
-
- qos_video_m1_w: qos@ffac0080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffac0080 0x0 0x20>;
- };
-
- qos_vop_big_r: qos@ffac8000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffac8000 0x0 0x20>;
- };
-
- qos_vop_big_w: qos@ffac8080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffac8080 0x0 0x20>;
- };
-
- qos_vop_little: qos@ffad0000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffad0000 0x0 0x20>;
- };
-
- qos_perihp: qos@ffad8080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffad8080 0x0 0x20>;
- };
-
- qos_gpu: qos@ffae0000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffae0000 0x0 0x20>;
- };
-
- pmu: power-management@ff310000 {
- compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
- reg = <0x0 0xff310000 0x0 0x1000>;
-
- /*
- * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
- * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
- * Some of the power domains are grouped together for every
- * voltage domain.
- * The detail contents as below.
- */
- power: power-controller {
- compatible = "rockchip,rk3399-power-controller";
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* These power domains are grouped by VD_CENTER */
- power-domain@RK3399_PD_IEP {
- reg = <RK3399_PD_IEP>;
- clocks = <&cru ACLK_IEP>,
- <&cru HCLK_IEP>;
- pm_qos = <&qos_iep>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_RGA {
- reg = <RK3399_PD_RGA>;
- clocks = <&cru ACLK_RGA>,
- <&cru HCLK_RGA>;
- pm_qos = <&qos_rga_r>,
- <&qos_rga_w>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_VCODEC {
- reg = <RK3399_PD_VCODEC>;
- clocks = <&cru ACLK_VCODEC>,
- <&cru HCLK_VCODEC>;
- pm_qos = <&qos_video_m0>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_VDU {
- reg = <RK3399_PD_VDU>;
- clocks = <&cru ACLK_VDU>,
- <&cru HCLK_VDU>,
- <&cru SCLK_VDU_CA>,
- <&cru SCLK_VDU_CORE>;
- pm_qos = <&qos_video_m1_r>,
- <&qos_video_m1_w>;
- #power-domain-cells = <0>;
- };
-
- /* These power domains are grouped by VD_GPU */
- power-domain@RK3399_PD_GPU {
- reg = <RK3399_PD_GPU>;
- clocks = <&cru ACLK_GPU>;
- pm_qos = <&qos_gpu>;
- #power-domain-cells = <0>;
- };
-
- /* These power domains are grouped by VD_LOGIC */
- power-domain@RK3399_PD_EDP {
- reg = <RK3399_PD_EDP>;
- clocks = <&cru PCLK_EDP_CTRL>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_EMMC {
- reg = <RK3399_PD_EMMC>;
- clocks = <&cru ACLK_EMMC>;
- pm_qos = <&qos_emmc>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_GMAC {
- reg = <RK3399_PD_GMAC>;
- clocks = <&cru ACLK_GMAC>,
- <&cru PCLK_GMAC>;
- pm_qos = <&qos_gmac>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_SD {
- reg = <RK3399_PD_SD>;
- clocks = <&cru HCLK_SDMMC>,
- <&cru SCLK_SDMMC>;
- pm_qos = <&qos_sd>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_SDIOAUDIO {
- reg = <RK3399_PD_SDIOAUDIO>;
- clocks = <&cru HCLK_SDIO>;
- pm_qos = <&qos_sdioaudio>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_TCPD0 {
- reg = <RK3399_PD_TCPD0>;
- clocks = <&cru SCLK_UPHY0_TCPDCORE>,
- <&cru SCLK_UPHY0_TCPDPHY_REF>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_TCPD1 {
- reg = <RK3399_PD_TCPD1>;
- clocks = <&cru SCLK_UPHY1_TCPDCORE>,
- <&cru SCLK_UPHY1_TCPDPHY_REF>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_USB3 {
- reg = <RK3399_PD_USB3>;
- clocks = <&cru ACLK_USB3>;
- pm_qos = <&qos_usb_otg0>,
- <&qos_usb_otg1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_VIO {
- reg = <RK3399_PD_VIO>;
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- power-domain@RK3399_PD_HDCP {
- reg = <RK3399_PD_HDCP>;
- clocks = <&cru ACLK_HDCP>,
- <&cru HCLK_HDCP>,
- <&cru PCLK_HDCP>;
- pm_qos = <&qos_hdcp>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_ISP0 {
- reg = <RK3399_PD_ISP0>;
- clocks = <&cru ACLK_ISP0>,
- <&cru HCLK_ISP0>;
- pm_qos = <&qos_isp0_m0>,
- <&qos_isp0_m1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_ISP1 {
- reg = <RK3399_PD_ISP1>;
- clocks = <&cru ACLK_ISP1>,
- <&cru HCLK_ISP1>;
- pm_qos = <&qos_isp1_m0>,
- <&qos_isp1_m1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_VO {
- reg = <RK3399_PD_VO>;
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- power-domain@RK3399_PD_VOPB {
- reg = <RK3399_PD_VOPB>;
- clocks = <&cru ACLK_VOP0>,
- <&cru HCLK_VOP0>;
- pm_qos = <&qos_vop_big_r>,
- <&qos_vop_big_w>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_VOPL {
- reg = <RK3399_PD_VOPL>;
- clocks = <&cru ACLK_VOP1>,
- <&cru HCLK_VOP1>;
- pm_qos = <&qos_vop_little>;
- #power-domain-cells = <0>;
- };
- };
- };
+ opp06 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <1100000 1100000 1250000>;
};
- };
-
- pmugrf: syscon@ff320000 {
- compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
- reg = <0x0 0xff320000 0x0 0x1000>;
-
- pmu_io_domains: io-domains {
- compatible = "rockchip,rk3399-pmu-io-voltage-domain";
- status = "disabled";
+ opp07 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1200000 1200000 1250000>;
};
};
- spi3: spi@ff350000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff350000 0x0 0x1000>;
- clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart4: serial@ff370000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff370000 0x0 0x100>;
- clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_xfer>;
- status = "disabled";
- };
-
- i2c0: i2c@ff3c0000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff3c0000 0x0 0x1000>;
- assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
- assigned-clock-rates = <200000000>;
- clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c4: i2c@ff3d0000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff3d0000 0x0 0x1000>;
- assigned-clocks = <&pmucru SCLK_I2C4_PMU>;
- assigned-clock-rates = <200000000>;
- clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c8: i2c@ff3e0000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff3e0000 0x0 0x1000>;
- assigned-clocks = <&pmucru SCLK_I2C8_PMU>;
- assigned-clock-rates = <200000000>;
- clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c8_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- pwm0: pwm@ff420000 {
- compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
- reg = <0x0 0xff420000 0x0 0x10>;
- #pwm-cells = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- clocks = <&pmucru PCLK_RKPWM_PMU>;
- status = "disabled";
- };
-
- pwm1: pwm@ff420010 {
- compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
- reg = <0x0 0xff420010 0x0 0x10>;
- #pwm-cells = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm1_pin>;
- clocks = <&pmucru PCLK_RKPWM_PMU>;
- status = "disabled";
- };
-
- pwm2: pwm@ff420020 {
- compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
- reg = <0x0 0xff420020 0x0 0x10>;
- #pwm-cells = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm2_pin>;
- clocks = <&pmucru PCLK_RKPWM_PMU>;
- status = "disabled";
- };
-
- pwm3: pwm@ff420030 {
- compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
- reg = <0x0 0xff420030 0x0 0x10>;
- #pwm-cells = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm3a_pin>;
- clocks = <&pmucru PCLK_RKPWM_PMU>;
- status = "disabled";
- };
-
- dfi: dfi@ff630000 {
- reg = <0x00 0xff630000 0x00 0x4000>;
- compatible = "rockchip,rk3399-dfi";
- rockchip,pmu = <&pmugrf>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_DDR_MON>;
- clock-names = "pclk_ddr_mon";
- };
-
- vpu: video-codec@ff650000 {
- compatible = "rockchip,rk3399-vpu";
- reg = <0x0 0xff650000 0x0 0x800>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "vepu", "vdpu";
- clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
- clock-names = "aclk", "hclk";
- iommus = <&vpu_mmu>;
- power-domains = <&power RK3399_PD_VCODEC>;
- };
-
- vpu_mmu: iommu@ff650800 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff650800 0x0 0x40>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
- clock-names = "aclk", "iface";
- #iommu-cells = <0>;
- power-domains = <&power RK3399_PD_VCODEC>;
- };
-
- vdec: video-codec@ff660000 {
- compatible = "rockchip,rk3399-vdec";
- reg = <0x0 0xff660000 0x0 0x480>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
- <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
- clock-names = "axi", "ahb", "cabac", "core";
- iommus = <&vdec_mmu>;
- power-domains = <&power RK3399_PD_VDU>;
- };
-
- vdec_mmu: iommu@ff660480 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
- clock-names = "aclk", "iface";
- power-domains = <&power RK3399_PD_VDU>;
- #iommu-cells = <0>;
- };
-
- iep_mmu: iommu@ff670800 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff670800 0x0 0x40>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
- clock-names = "aclk", "iface";
- #iommu-cells = <0>;
- status = "disabled";
- };
-
- rga: rga@ff680000 {
- compatible = "rockchip,rk3399-rga";
- reg = <0x0 0xff680000 0x0 0x10000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
- clock-names = "aclk", "hclk", "sclk";
- resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
- reset-names = "core", "axi", "ahb";
- power-domains = <&power RK3399_PD_RGA>;
- };
-
- efuse0: efuse@ff690000 {
- compatible = "rockchip,rk3399-efuse";
- reg = <0x0 0xff690000 0x0 0x80>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&cru PCLK_EFUSE1024NS>;
- clock-names = "pclk_efuse";
+ gpu_opp_table: opp-table-2 {
+ compatible = "operating-points-v2";
- /* Data cells */
- cpu_id: cpu-id@7 {
- reg = <0x07 0x10>;
+ opp00 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <825000 825000 1150000>;
};
- cpub_leakage: cpu-leakage@17 {
- reg = <0x17 0x1>;
+ opp01 {
+ opp-hz = /bits/ 64 <297000000>;
+ opp-microvolt = <825000 825000 1150000>;
};
- gpu_leakage: gpu-leakage@18 {
- reg = <0x18 0x1>;
+ opp02 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <825000 825000 1150000>;
};
- center_leakage: center-leakage@19 {
- reg = <0x19 0x1>;
+ opp03 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <875000 875000 1150000>;
};
- cpul_leakage: cpu-leakage@1a {
- reg = <0x1a 0x1>;
+ opp04 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <925000 925000 1150000>;
};
- logic_leakage: logic-leakage@1b {
- reg = <0x1b 0x1>;
+ opp05 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1100000 1100000 1150000>;
};
- wafer_info: wafer-info@1c {
- reg = <0x1c 0x1>;
- };
- };
-
- dmac_bus: dma-controller@ff6d0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff6d0000 0x0 0x4000>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
- #dma-cells = <1>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC0_PERILP>;
- clock-names = "apb_pclk";
- };
-
- dmac_peri: dma-controller@ff6e0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff6e0000 0x0 0x4000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
- #dma-cells = <1>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC1_PERILP>;
- clock-names = "apb_pclk";
- };
-
- pmucru: clock-controller@ff750000 {
- compatible = "rockchip,rk3399-pmucru";
- reg = <0x0 0xff750000 0x0 0x1000>;
- clocks = <&xin24m>;
- clock-names = "xin24m";
- rockchip,grf = <&pmugrf>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- assigned-clocks = <&pmucru PLL_PPLL>;
- assigned-clock-rates = <676000000>;
- };
-
- cru: clock-controller@ff760000 {
- compatible = "rockchip,rk3399-cru";
- reg = <0x0 0xff760000 0x0 0x1000>;
- clocks = <&xin24m>;
- clock-names = "xin24m";
- rockchip,grf = <&grf>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- assigned-clocks =
- <&cru PLL_GPLL>, <&cru PLL_CPLL>,
- <&cru PLL_NPLL>,
- <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
- <&cru PCLK_PERIHP>,
- <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
- <&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
- <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
- <&cru ACLK_VIO>, <&cru ACLK_HDCP>,
- <&cru ACLK_GIC_PRE>,
- <&cru PCLK_DDR>,
- <&cru ACLK_VDU>;
- assigned-clock-rates =
- <594000000>, <800000000>,
- <1000000000>,
- <150000000>, <75000000>,
- <37500000>,
- <100000000>, <100000000>,
- <50000000>, <600000000>,
- <100000000>, <50000000>,
- <400000000>, <400000000>,
- <200000000>,
- <200000000>,
- <400000000>;
};
+};
- grf: syscon@ff770000 {
- compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
- reg = <0x0 0xff770000 0x0 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- io_domains: io-domains {
- compatible = "rockchip,rk3399-io-voltage-domain";
- status = "disabled";
- };
-
- mipi_dphy_rx0: mipi-dphy-rx0 {
- compatible = "rockchip,rk3399-mipi-dphy-rx0";
- clocks = <&cru SCLK_MIPIDPHY_REF>,
- <&cru SCLK_DPHY_RX0_CFG>,
- <&cru PCLK_VIO_GRF>;
- clock-names = "dphy-ref", "dphy-cfg", "grf";
- power-domains = <&power RK3399_PD_VIO>;
- #phy-cells = <0>;
- status = "disabled";
- };
-
- u2phy0: usb2phy@e450 {
- compatible = "rockchip,rk3399-usb2phy";
- reg = <0xe450 0x10>;
- clocks = <&cru SCLK_USB2PHY0_REF>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- clock-output-names = "clk_usbphy0_480m";
- status = "disabled";
-
- u2phy0_host: host-port {
- #phy-cells = <0>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "linestate";
- status = "disabled";
- };
-
- u2phy0_otg: otg-port {
- #phy-cells = <0>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "otg-bvalid", "otg-id",
- "linestate";
- status = "disabled";
- };
- };
-
- u2phy1: usb2phy@e460 {
- compatible = "rockchip,rk3399-usb2phy";
- reg = <0xe460 0x10>;
- clocks = <&cru SCLK_USB2PHY1_REF>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- clock-output-names = "clk_usbphy1_480m";
- status = "disabled";
-
- u2phy1_host: host-port {
- #phy-cells = <0>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "linestate";
- status = "disabled";
- };
+&cpu_l0 {
+ operating-points-v2 = <&cluster0_opp>;
+};
- u2phy1_otg: otg-port {
- #phy-cells = <0>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "otg-bvalid", "otg-id",
- "linestate";
- status = "disabled";
- };
- };
+&cpu_l1 {
+ operating-points-v2 = <&cluster0_opp>;
+};
- emmc_phy: phy@f780 {
- compatible = "rockchip,rk3399-emmc-phy";
- reg = <0xf780 0x24>;
- clocks = <&sdhci>;
- clock-names = "emmcclk";
- drive-impedance-ohm = <50>;
- #phy-cells = <0>;
- status = "disabled";
- };
+&cpu_l2 {
+ operating-points-v2 = <&cluster0_opp>;
+};
- pcie_phy: pcie-phy {
- compatible = "rockchip,rk3399-pcie-phy";
- clocks = <&cru SCLK_PCIEPHY_REF>;
- clock-names = "refclk";
- #phy-cells = <1>;
- resets = <&cru SRST_PCIEPHY>;
- reset-names = "phy";
- status = "disabled";
- };
- };
+&cpu_l3 {
+ operating-points-v2 = <&cluster0_opp>;
+};
- tcphy0: phy@ff7c0000 {
- compatible = "rockchip,rk3399-typec-phy";
- reg = <0x0 0xff7c0000 0x0 0x40000>;
- clocks = <&cru SCLK_UPHY0_TCPDCORE>,
- <&cru SCLK_UPHY0_TCPDPHY_REF>;
- clock-names = "tcpdcore", "tcpdphy-ref";
- assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
- assigned-clock-rates = <50000000>;
- power-domains = <&power RK3399_PD_TCPD0>;
- resets = <&cru SRST_UPHY0>,
- <&cru SRST_UPHY0_PIPE_L00>,
- <&cru SRST_P_UPHY0_TCPHY>;
- reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
- rockchip,grf = <&grf>;
- status = "disabled";
+&cpu_b0 {
+ operating-points-v2 = <&cluster1_opp>;
+};
- tcphy0_dp: dp-port {
- #phy-cells = <0>;
- };
+&cpu_b1 {
+ operating-points-v2 = <&cluster1_opp>;
+};
- tcphy0_usb3: usb3-port {
- #phy-cells = <0>;
- };
- };
-
- tcphy1: phy@ff800000 {
- compatible = "rockchip,rk3399-typec-phy";
- reg = <0x0 0xff800000 0x0 0x40000>;
- clocks = <&cru SCLK_UPHY1_TCPDCORE>,
- <&cru SCLK_UPHY1_TCPDPHY_REF>;
- clock-names = "tcpdcore", "tcpdphy-ref";
- assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
- assigned-clock-rates = <50000000>;
- power-domains = <&power RK3399_PD_TCPD1>;
- resets = <&cru SRST_UPHY1>,
- <&cru SRST_UPHY1_PIPE_L00>,
- <&cru SRST_P_UPHY1_TCPHY>;
- reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
- rockchip,grf = <&grf>;
- status = "disabled";
-
- tcphy1_dp: dp-port {
- #phy-cells = <0>;
- };
-
- tcphy1_usb3: usb3-port {
- #phy-cells = <0>;
- };
- };
-
- watchdog@ff848000 {
- compatible = "rockchip,rk3399-wdt", "snps,dw-wdt";
- reg = <0x0 0xff848000 0x0 0x100>;
- clocks = <&cru PCLK_WDT>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
- };
-
- rktimer: rktimer@ff850000 {
- compatible = "rockchip,rk3399-timer";
- reg = <0x0 0xff850000 0x0 0x1000>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
- clock-names = "pclk", "timer";
- };
-
- spdif: spdif@ff870000 {
- compatible = "rockchip,rk3399-spdif";
- reg = <0x0 0xff870000 0x0 0x1000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_bus 7>;
- dma-names = "tx";
- clock-names = "mclk", "hclk";
- clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
- pinctrl-names = "default";
- pinctrl-0 = <&spdif_bus>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s0: i2s@ff880000 {
- compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
- reg = <0x0 0xff880000 0x0 0x1000>;
- rockchip,grf = <&grf>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_bus 0>, <&dmac_bus 1>;
- dma-names = "tx", "rx";
- clock-names = "i2s_clk", "i2s_hclk";
- clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
- pinctrl-names = "bclk_on", "bclk_off";
- pinctrl-0 = <&i2s0_8ch_bus>;
- pinctrl-1 = <&i2s0_8ch_bus_bclk_off>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s1: i2s@ff890000 {
- compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
- reg = <0x0 0xff890000 0x0 0x1000>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_bus 2>, <&dmac_bus 3>;
- dma-names = "tx", "rx";
- clock-names = "i2s_clk", "i2s_hclk";
- clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1_2ch_bus>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s2: i2s@ff8a0000 {
- compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
- reg = <0x0 0xff8a0000 0x0 0x1000>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_bus 4>, <&dmac_bus 5>;
- dma-names = "tx", "rx";
- clock-names = "i2s_clk", "i2s_hclk";
- clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- vopl: vop@ff8f0000 {
- compatible = "rockchip,rk3399-vop-lit";
- reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>;
- interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
- assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
- assigned-clock-rates = <400000000>, <100000000>;
- clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
- clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
- iommus = <&vopl_mmu>;
- power-domains = <&power RK3399_PD_VOPL>;
- resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
- reset-names = "axi", "ahb", "dclk";
- status = "disabled";
-
- vopl_out: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vopl_out_mipi: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&mipi_in_vopl>;
- };
-
- vopl_out_edp: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&edp_in_vopl>;
- };
-
- vopl_out_hdmi: endpoint@2 {
- reg = <2>;
- remote-endpoint = <&hdmi_in_vopl>;
- };
-
- vopl_out_mipi1: endpoint@3 {
- reg = <3>;
- remote-endpoint = <&mipi1_in_vopl>;
- };
-
- vopl_out_dp: endpoint@4 {
- reg = <4>;
- remote-endpoint = <&dp_in_vopl>;
- };
- };
- };
-
- vopl_mmu: iommu@ff8f3f00 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff8f3f00 0x0 0x100>;
- interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
- clock-names = "aclk", "iface";
- power-domains = <&power RK3399_PD_VOPL>;
- #iommu-cells = <0>;
- status = "disabled";
- };
-
- vopb: vop@ff900000 {
- compatible = "rockchip,rk3399-vop-big";
- reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
- assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
- assigned-clock-rates = <400000000>, <100000000>;
- clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
- clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
- iommus = <&vopb_mmu>;
- power-domains = <&power RK3399_PD_VOPB>;
- resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
- reset-names = "axi", "ahb", "dclk";
- status = "disabled";
-
- vopb_out: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vopb_out_edp: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&edp_in_vopb>;
- };
-
- vopb_out_mipi: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&mipi_in_vopb>;
- };
-
- vopb_out_hdmi: endpoint@2 {
- reg = <2>;
- remote-endpoint = <&hdmi_in_vopb>;
- };
-
- vopb_out_mipi1: endpoint@3 {
- reg = <3>;
- remote-endpoint = <&mipi1_in_vopb>;
- };
-
- vopb_out_dp: endpoint@4 {
- reg = <4>;
- remote-endpoint = <&dp_in_vopb>;
- };
- };
- };
-
- vopb_mmu: iommu@ff903f00 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff903f00 0x0 0x100>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
- clock-names = "aclk", "iface";
- power-domains = <&power RK3399_PD_VOPB>;
- #iommu-cells = <0>;
- status = "disabled";
- };
-
- isp0: isp0@ff910000 {
- compatible = "rockchip,rk3399-cif-isp";
- reg = <0x0 0xff910000 0x0 0x4000>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_ISP0>,
- <&cru ACLK_ISP0_WRAPPER>,
- <&cru HCLK_ISP0_WRAPPER>;
- clock-names = "isp", "aclk", "hclk";
- iommus = <&isp0_mmu>;
- phys = <&mipi_dphy_rx0>;
- phy-names = "dphy";
- power-domains = <&power RK3399_PD_ISP0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
- };
-
- isp0_mmu: iommu@ff914000 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
- clock-names = "aclk", "iface";
- #iommu-cells = <0>;
- power-domains = <&power RK3399_PD_ISP0>;
- rockchip,disable-mmu-reset;
- };
-
- isp1: isp1@ff920000 {
- compatible = "rockchip,rk3399-cif-isp";
- reg = <0x0 0xff920000 0x0 0x4000>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_ISP1>,
- <&cru ACLK_ISP1_WRAPPER>,
- <&cru HCLK_ISP1_WRAPPER>;
- clock-names = "isp", "aclk", "hclk";
- iommus = <&isp1_mmu>;
- phys = <&mipi_dsi1>;
- phy-names = "dphy";
- power-domains = <&power RK3399_PD_ISP1>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
- };
-
- isp1_mmu: iommu@ff924000 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
- clock-names = "aclk", "iface";
- #iommu-cells = <0>;
- power-domains = <&power RK3399_PD_ISP1>;
- rockchip,disable-mmu-reset;
- };
-
- hdmi_sound: hdmi-sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "hdmi-sound";
- status = "disabled";
-
- simple-audio-card,cpu {
- sound-dai = <&i2s2>;
- };
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
- };
- };
-
- hdmi: hdmi@ff940000 {
- compatible = "rockchip,rk3399-dw-hdmi";
- reg = <0x0 0xff940000 0x0 0x20000>;
- reg-io-width = <4>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_HDMI_CTRL>,
- <&cru SCLK_HDMI_SFR>,
- <&cru SCLK_HDMI_CEC>,
- <&cru PCLK_VIO_GRF>,
- <&cru PLL_VPLL>;
- clock-names = "iahb", "isfr", "cec", "grf", "ref";
- power-domains = <&power RK3399_PD_HDCP>;
- rockchip,grf = <&grf>;
- #sound-dai-cells = <0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdmi_in: port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdmi_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_hdmi>;
- };
- hdmi_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_hdmi>;
- };
- };
-
- hdmi_out: port@1 {
- reg = <1>;
- };
- };
- };
-
- mipi_dsi: dsi@ff960000 {
- compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
- reg = <0x0 0xff960000 0x0 0x8000>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
- <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
- clock-names = "ref", "pclk", "phy_cfg", "grf";
- power-domains = <&power RK3399_PD_VIO>;
- resets = <&cru SRST_P_MIPI_DSI0>;
- reset-names = "apb";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi_in: port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_mipi>;
- };
-
- mipi_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_mipi>;
- };
- };
-
- mipi_out: port@1 {
- reg = <1>;
- };
- };
- };
-
- mipi_dsi1: dsi@ff968000 {
- compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
- reg = <0x0 0xff968000 0x0 0x8000>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>,
- <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>;
- clock-names = "ref", "pclk", "phy_cfg", "grf";
- power-domains = <&power RK3399_PD_VIO>;
- resets = <&cru SRST_P_MIPI_DSI1>;
- reset-names = "apb";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
- #phy-cells = <0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi1_in: port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi1_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_mipi1>;
- };
-
- mipi1_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_mipi1>;
- };
- };
-
- mipi1_out: port@1 {
- reg = <1>;
- };
- };
- };
-
- edp: dp@ff970000 {
- compatible = "rockchip,rk3399-edp";
- reg = <0x0 0xff970000 0x0 0x8000>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
- clock-names = "dp", "pclk", "grf";
- pinctrl-names = "default";
- pinctrl-0 = <&edp_hpd>;
- power-domains = <&power RK3399_PD_EDP>;
- resets = <&cru SRST_P_EDP_CTRL>;
- reset-names = "dp";
- rockchip,grf = <&grf>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_in: port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_edp>;
- };
-
- edp_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_edp>;
- };
- };
-
- edp_out: port@1 {
- reg = <1>;
- };
- };
- };
-
- gpu: gpu@ff9a0000 {
- compatible = "rockchip,rk3399-mali", "arm,mali-t860";
- reg = <0x0 0xff9a0000 0x0 0x10000>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "job", "mmu", "gpu";
- clocks = <&cru ACLK_GPU>;
- #cooling-cells = <2>;
- dynamic-power-coefficient = <2640>;
- power-domains = <&power RK3399_PD_GPU>;
- status = "disabled";
- };
-
- pinctrl: pinctrl {
- compatible = "rockchip,rk3399-pinctrl";
- rockchip,grf = <&grf>;
- rockchip,pmu = <&pmugrf>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio0: gpio@ff720000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff720000 0x0 0x100>;
- clocks = <&pmucru PCLK_GPIO0_PMU>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
-
- gpio-controller;
- #gpio-cells = <0x2>;
-
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
-
- gpio1: gpio@ff730000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff730000 0x0 0x100>;
- clocks = <&pmucru PCLK_GPIO1_PMU>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
-
- gpio-controller;
- #gpio-cells = <0x2>;
-
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
-
- gpio2: gpio@ff780000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff780000 0x0 0x100>;
- clocks = <&cru PCLK_GPIO2>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
-
- gpio-controller;
- #gpio-cells = <0x2>;
-
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
-
- gpio3: gpio@ff788000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff788000 0x0 0x100>;
- clocks = <&cru PCLK_GPIO3>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
-
- gpio-controller;
- #gpio-cells = <0x2>;
-
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
-
- gpio4: gpio@ff790000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff790000 0x0 0x100>;
- clocks = <&cru PCLK_GPIO4>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
-
- gpio-controller;
- #gpio-cells = <0x2>;
-
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
-
- pcfg_pull_up: pcfg-pull-up {
- bias-pull-up;
- };
-
- pcfg_pull_down: pcfg-pull-down {
- bias-pull-down;
- };
-
- pcfg_pull_none: pcfg-pull-none {
- bias-disable;
- };
-
- pcfg_pull_none_12ma: pcfg-pull-none-12ma {
- bias-disable;
- drive-strength = <12>;
- };
-
- pcfg_pull_none_13ma: pcfg-pull-none-13ma {
- bias-disable;
- drive-strength = <13>;
- };
-
- pcfg_pull_none_18ma: pcfg-pull-none-18ma {
- bias-disable;
- drive-strength = <18>;
- };
-
- pcfg_pull_none_20ma: pcfg-pull-none-20ma {
- bias-disable;
- drive-strength = <20>;
- };
-
- pcfg_pull_up_2ma: pcfg-pull-up-2ma {
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pcfg_pull_up_8ma: pcfg-pull-up-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- pcfg_pull_up_18ma: pcfg-pull-up-18ma {
- bias-pull-up;
- drive-strength = <18>;
- };
-
- pcfg_pull_up_20ma: pcfg-pull-up-20ma {
- bias-pull-up;
- drive-strength = <20>;
- };
-
- pcfg_pull_down_4ma: pcfg-pull-down-4ma {
- bias-pull-down;
- drive-strength = <4>;
- };
-
- pcfg_pull_down_8ma: pcfg-pull-down-8ma {
- bias-pull-down;
- drive-strength = <8>;
- };
-
- pcfg_pull_down_12ma: pcfg-pull-down-12ma {
- bias-pull-down;
- drive-strength = <12>;
- };
-
- pcfg_pull_down_18ma: pcfg-pull-down-18ma {
- bias-pull-down;
- drive-strength = <18>;
- };
-
- pcfg_pull_down_20ma: pcfg-pull-down-20ma {
- bias-pull-down;
- drive-strength = <20>;
- };
-
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- pcfg_output_low: pcfg-output-low {
- output-low;
- };
-
- pcfg_input_enable: pcfg-input-enable {
- input-enable;
- };
-
- pcfg_input_pull_up: pcfg-input-pull-up {
- input-enable;
- bias-pull-up;
- };
-
- pcfg_input_pull_down: pcfg-input-pull-down {
- input-enable;
- bias-pull-down;
- };
-
- clock {
- clk_32k: clk-32k {
- rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
- };
- };
-
- cif {
- cif_clkin: cif-clkin {
- rockchip,pins =
- <2 RK_PB2 3 &pcfg_pull_none>;
- };
-
- cif_clkouta: cif-clkouta {
- rockchip,pins =
- <2 RK_PB3 3 &pcfg_pull_none>;
- };
- };
-
- edp {
- edp_hpd: edp-hpd {
- rockchip,pins =
- <4 RK_PC7 2 &pcfg_pull_none>;
- };
- };
-
- gmac {
- rgmii_pins: rgmii-pins {
- rockchip,pins =
- /* mac_txclk */
- <3 RK_PC1 1 &pcfg_pull_none_13ma>,
- /* mac_rxclk */
- <3 RK_PB6 1 &pcfg_pull_none>,
- /* mac_mdio */
- <3 RK_PB5 1 &pcfg_pull_none>,
- /* mac_txen */
- <3 RK_PB4 1 &pcfg_pull_none_13ma>,
- /* mac_clk */
- <3 RK_PB3 1 &pcfg_pull_none>,
- /* mac_rxdv */
- <3 RK_PB1 1 &pcfg_pull_none>,
- /* mac_mdc */
- <3 RK_PB0 1 &pcfg_pull_none>,
- /* mac_rxd1 */
- <3 RK_PA7 1 &pcfg_pull_none>,
- /* mac_rxd0 */
- <3 RK_PA6 1 &pcfg_pull_none>,
- /* mac_txd1 */
- <3 RK_PA5 1 &pcfg_pull_none_13ma>,
- /* mac_txd0 */
- <3 RK_PA4 1 &pcfg_pull_none_13ma>,
- /* mac_rxd3 */
- <3 RK_PA3 1 &pcfg_pull_none>,
- /* mac_rxd2 */
- <3 RK_PA2 1 &pcfg_pull_none>,
- /* mac_txd3 */
- <3 RK_PA1 1 &pcfg_pull_none_13ma>,
- /* mac_txd2 */
- <3 RK_PA0 1 &pcfg_pull_none_13ma>;
- };
-
- rmii_pins: rmii-pins {
- rockchip,pins =
- /* mac_mdio */
- <3 RK_PB5 1 &pcfg_pull_none>,
- /* mac_txen */
- <3 RK_PB4 1 &pcfg_pull_none_13ma>,
- /* mac_clk */
- <3 RK_PB3 1 &pcfg_pull_none>,
- /* mac_rxer */
- <3 RK_PB2 1 &pcfg_pull_none>,
- /* mac_rxdv */
- <3 RK_PB1 1 &pcfg_pull_none>,
- /* mac_mdc */
- <3 RK_PB0 1 &pcfg_pull_none>,
- /* mac_rxd1 */
- <3 RK_PA7 1 &pcfg_pull_none>,
- /* mac_rxd0 */
- <3 RK_PA6 1 &pcfg_pull_none>,
- /* mac_txd1 */
- <3 RK_PA5 1 &pcfg_pull_none_13ma>,
- /* mac_txd0 */
- <3 RK_PA4 1 &pcfg_pull_none_13ma>;
- };
- };
-
- i2c0 {
- i2c0_xfer: i2c0-xfer {
- rockchip,pins =
- <1 RK_PB7 2 &pcfg_pull_none>,
- <1 RK_PC0 2 &pcfg_pull_none>;
- };
- };
-
- i2c1 {
- i2c1_xfer: i2c1-xfer {
- rockchip,pins =
- <4 RK_PA2 1 &pcfg_pull_none>,
- <4 RK_PA1 1 &pcfg_pull_none>;
- };
- };
-
- i2c2 {
- i2c2_xfer: i2c2-xfer {
- rockchip,pins =
- <2 RK_PA1 2 &pcfg_pull_none_12ma>,
- <2 RK_PA0 2 &pcfg_pull_none_12ma>;
- };
- };
-
- i2c3 {
- i2c3_xfer: i2c3-xfer {
- rockchip,pins =
- <4 RK_PC1 1 &pcfg_pull_none>,
- <4 RK_PC0 1 &pcfg_pull_none>;
- };
- };
-
- i2c4 {
- i2c4_xfer: i2c4-xfer {
- rockchip,pins =
- <1 RK_PB4 1 &pcfg_pull_none>,
- <1 RK_PB3 1 &pcfg_pull_none>;
- };
- };
-
- i2c5 {
- i2c5_xfer: i2c5-xfer {
- rockchip,pins =
- <3 RK_PB3 2 &pcfg_pull_none>,
- <3 RK_PB2 2 &pcfg_pull_none>;
- };
- };
-
- i2c6 {
- i2c6_xfer: i2c6-xfer {
- rockchip,pins =
- <2 RK_PB2 2 &pcfg_pull_none>,
- <2 RK_PB1 2 &pcfg_pull_none>;
- };
- };
-
- i2c7 {
- i2c7_xfer: i2c7-xfer {
- rockchip,pins =
- <2 RK_PB0 2 &pcfg_pull_none>,
- <2 RK_PA7 2 &pcfg_pull_none>;
- };
- };
-
- i2c8 {
- i2c8_xfer: i2c8-xfer {
- rockchip,pins =
- <1 RK_PC5 1 &pcfg_pull_none>,
- <1 RK_PC4 1 &pcfg_pull_none>;
- };
- };
-
- i2s0 {
- i2s0_2ch_bus: i2s0-2ch-bus {
- rockchip,pins =
- <3 RK_PD0 1 &pcfg_pull_none>,
- <3 RK_PD1 1 &pcfg_pull_none>,
- <3 RK_PD2 1 &pcfg_pull_none>,
- <3 RK_PD3 1 &pcfg_pull_none>,
- <3 RK_PD7 1 &pcfg_pull_none>,
- <4 RK_PA0 1 &pcfg_pull_none>;
- };
-
- i2s0_2ch_bus_bclk_off: i2s0-2ch-bus-bclk-off {
- rockchip,pins =
- <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD1 1 &pcfg_pull_none>,
- <3 RK_PD2 1 &pcfg_pull_none>,
- <3 RK_PD3 1 &pcfg_pull_none>,
- <3 RK_PD7 1 &pcfg_pull_none>,
- <4 RK_PA0 1 &pcfg_pull_none>;
- };
-
- i2s0_8ch_bus: i2s0-8ch-bus {
- rockchip,pins =
- <3 RK_PD0 1 &pcfg_pull_none>,
- <3 RK_PD1 1 &pcfg_pull_none>,
- <3 RK_PD2 1 &pcfg_pull_none>,
- <3 RK_PD3 1 &pcfg_pull_none>,
- <3 RK_PD4 1 &pcfg_pull_none>,
- <3 RK_PD5 1 &pcfg_pull_none>,
- <3 RK_PD6 1 &pcfg_pull_none>,
- <3 RK_PD7 1 &pcfg_pull_none>,
- <4 RK_PA0 1 &pcfg_pull_none>;
- };
-
- i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off {
- rockchip,pins =
- <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD1 1 &pcfg_pull_none>,
- <3 RK_PD2 1 &pcfg_pull_none>,
- <3 RK_PD3 1 &pcfg_pull_none>,
- <3 RK_PD4 1 &pcfg_pull_none>,
- <3 RK_PD5 1 &pcfg_pull_none>,
- <3 RK_PD6 1 &pcfg_pull_none>,
- <3 RK_PD7 1 &pcfg_pull_none>,
- <4 RK_PA0 1 &pcfg_pull_none>;
- };
- };
-
- i2s1 {
- i2s1_2ch_bus: i2s1-2ch-bus {
- rockchip,pins =
- <4 RK_PA3 1 &pcfg_pull_none>,
- <4 RK_PA4 1 &pcfg_pull_none>,
- <4 RK_PA5 1 &pcfg_pull_none>,
- <4 RK_PA6 1 &pcfg_pull_none>,
- <4 RK_PA7 1 &pcfg_pull_none>;
- };
-
- i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off {
- rockchip,pins =
- <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>,
- <4 RK_PA4 1 &pcfg_pull_none>,
- <4 RK_PA5 1 &pcfg_pull_none>,
- <4 RK_PA6 1 &pcfg_pull_none>,
- <4 RK_PA7 1 &pcfg_pull_none>;
- };
- };
-
- sdio0 {
- sdio0_bus1: sdio0-bus1 {
- rockchip,pins =
- <2 RK_PC4 1 &pcfg_pull_up>;
- };
-
- sdio0_bus4: sdio0-bus4 {
- rockchip,pins =
- <2 RK_PC4 1 &pcfg_pull_up>,
- <2 RK_PC5 1 &pcfg_pull_up>,
- <2 RK_PC6 1 &pcfg_pull_up>,
- <2 RK_PC7 1 &pcfg_pull_up>;
- };
-
- sdio0_cmd: sdio0-cmd {
- rockchip,pins =
- <2 RK_PD0 1 &pcfg_pull_up>;
- };
-
- sdio0_clk: sdio0-clk {
- rockchip,pins =
- <2 RK_PD1 1 &pcfg_pull_none>;
- };
-
- sdio0_cd: sdio0-cd {
- rockchip,pins =
- <2 RK_PD2 1 &pcfg_pull_up>;
- };
-
- sdio0_pwr: sdio0-pwr {
- rockchip,pins =
- <2 RK_PD3 1 &pcfg_pull_up>;
- };
-
- sdio0_bkpwr: sdio0-bkpwr {
- rockchip,pins =
- <2 RK_PD4 1 &pcfg_pull_up>;
- };
-
- sdio0_wp: sdio0-wp {
- rockchip,pins =
- <0 RK_PA3 1 &pcfg_pull_up>;
- };
-
- sdio0_int: sdio0-int {
- rockchip,pins =
- <0 RK_PA4 1 &pcfg_pull_up>;
- };
- };
-
- sdmmc {
- sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins =
- <4 RK_PB0 1 &pcfg_pull_up>;
- };
-
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <4 RK_PB0 1 &pcfg_pull_up>,
- <4 RK_PB1 1 &pcfg_pull_up>,
- <4 RK_PB2 1 &pcfg_pull_up>,
- <4 RK_PB3 1 &pcfg_pull_up>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins =
- <4 RK_PB4 1 &pcfg_pull_none>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins =
- <4 RK_PB5 1 &pcfg_pull_up>;
- };
-
- sdmmc_cd: sdmmc-cd {
- rockchip,pins =
- <0 RK_PA7 1 &pcfg_pull_up>;
- };
-
- sdmmc_wp: sdmmc-wp {
- rockchip,pins =
- <0 RK_PB0 1 &pcfg_pull_up>;
- };
- };
-
- suspend {
- ap_pwroff: ap-pwroff {
- rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
- };
-
- ddrio_pwroff: ddrio-pwroff {
- rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
- };
- };
-
- spdif {
- spdif_bus: spdif-bus {
- rockchip,pins =
- <4 RK_PC5 1 &pcfg_pull_none>;
- };
-
- spdif_bus_1: spdif-bus-1 {
- rockchip,pins =
- <3 RK_PC0 3 &pcfg_pull_none>;
- };
- };
-
- spi0 {
- spi0_clk: spi0-clk {
- rockchip,pins =
- <3 RK_PA6 2 &pcfg_pull_up>;
- };
- spi0_cs0: spi0-cs0 {
- rockchip,pins =
- <3 RK_PA7 2 &pcfg_pull_up>;
- };
- spi0_cs1: spi0-cs1 {
- rockchip,pins =
- <3 RK_PB0 2 &pcfg_pull_up>;
- };
- spi0_tx: spi0-tx {
- rockchip,pins =
- <3 RK_PA5 2 &pcfg_pull_up>;
- };
- spi0_rx: spi0-rx {
- rockchip,pins =
- <3 RK_PA4 2 &pcfg_pull_up>;
- };
- };
-
- spi1 {
- spi1_clk: spi1-clk {
- rockchip,pins =
- <1 RK_PB1 2 &pcfg_pull_up>;
- };
- spi1_cs0: spi1-cs0 {
- rockchip,pins =
- <1 RK_PB2 2 &pcfg_pull_up>;
- };
- spi1_rx: spi1-rx {
- rockchip,pins =
- <1 RK_PA7 2 &pcfg_pull_up>;
- };
- spi1_tx: spi1-tx {
- rockchip,pins =
- <1 RK_PB0 2 &pcfg_pull_up>;
- };
- };
-
- spi2 {
- spi2_clk: spi2-clk {
- rockchip,pins =
- <2 RK_PB3 1 &pcfg_pull_up>;
- };
- spi2_cs0: spi2-cs0 {
- rockchip,pins =
- <2 RK_PB4 1 &pcfg_pull_up>;
- };
- spi2_rx: spi2-rx {
- rockchip,pins =
- <2 RK_PB1 1 &pcfg_pull_up>;
- };
- spi2_tx: spi2-tx {
- rockchip,pins =
- <2 RK_PB2 1 &pcfg_pull_up>;
- };
- };
-
- spi3 {
- spi3_clk: spi3-clk {
- rockchip,pins =
- <1 RK_PC1 1 &pcfg_pull_up>;
- };
- spi3_cs0: spi3-cs0 {
- rockchip,pins =
- <1 RK_PC2 1 &pcfg_pull_up>;
- };
- spi3_rx: spi3-rx {
- rockchip,pins =
- <1 RK_PB7 1 &pcfg_pull_up>;
- };
- spi3_tx: spi3-tx {
- rockchip,pins =
- <1 RK_PC0 1 &pcfg_pull_up>;
- };
- };
-
- spi4 {
- spi4_clk: spi4-clk {
- rockchip,pins =
- <3 RK_PA2 2 &pcfg_pull_up>;
- };
- spi4_cs0: spi4-cs0 {
- rockchip,pins =
- <3 RK_PA3 2 &pcfg_pull_up>;
- };
- spi4_rx: spi4-rx {
- rockchip,pins =
- <3 RK_PA0 2 &pcfg_pull_up>;
- };
- spi4_tx: spi4-tx {
- rockchip,pins =
- <3 RK_PA1 2 &pcfg_pull_up>;
- };
- };
-
- spi5 {
- spi5_clk: spi5-clk {
- rockchip,pins =
- <2 RK_PC6 2 &pcfg_pull_up>;
- };
- spi5_cs0: spi5-cs0 {
- rockchip,pins =
- <2 RK_PC7 2 &pcfg_pull_up>;
- };
- spi5_rx: spi5-rx {
- rockchip,pins =
- <2 RK_PC4 2 &pcfg_pull_up>;
- };
- spi5_tx: spi5-tx {
- rockchip,pins =
- <2 RK_PC5 2 &pcfg_pull_up>;
- };
- };
-
- testclk {
- test_clkout0: test-clkout0 {
- rockchip,pins =
- <0 RK_PA0 1 &pcfg_pull_none>;
- };
-
- test_clkout1: test-clkout1 {
- rockchip,pins =
- <2 RK_PD1 2 &pcfg_pull_none>;
- };
-
- test_clkout2: test-clkout2 {
- rockchip,pins =
- <0 RK_PB0 3 &pcfg_pull_none>;
- };
- };
-
- tsadc {
- otp_pin: otp-pin {
- rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- otp_out: otp-out {
- rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
- };
- };
-
- uart0 {
- uart0_xfer: uart0-xfer {
- rockchip,pins =
- <2 RK_PC0 1 &pcfg_pull_up>,
- <2 RK_PC1 1 &pcfg_pull_none>;
- };
-
- uart0_cts: uart0-cts {
- rockchip,pins =
- <2 RK_PC2 1 &pcfg_pull_none>;
- };
-
- uart0_rts: uart0-rts {
- rockchip,pins =
- <2 RK_PC3 1 &pcfg_pull_none>;
- };
- };
-
- uart1 {
- uart1_xfer: uart1-xfer {
- rockchip,pins =
- <3 RK_PB4 2 &pcfg_pull_up>,
- <3 RK_PB5 2 &pcfg_pull_none>;
- };
- };
-
- uart2a {
- uart2a_xfer: uart2a-xfer {
- rockchip,pins =
- <4 RK_PB0 2 &pcfg_pull_up>,
- <4 RK_PB1 2 &pcfg_pull_none>;
- };
- };
-
- uart2b {
- uart2b_xfer: uart2b-xfer {
- rockchip,pins =
- <4 RK_PC0 2 &pcfg_pull_up>,
- <4 RK_PC1 2 &pcfg_pull_none>;
- };
- };
-
- uart2c {
- uart2c_xfer: uart2c-xfer {
- rockchip,pins =
- <4 RK_PC3 1 &pcfg_pull_up>,
- <4 RK_PC4 1 &pcfg_pull_none>;
- };
- };
-
- uart3 {
- uart3_xfer: uart3-xfer {
- rockchip,pins =
- <3 RK_PB6 2 &pcfg_pull_up>,
- <3 RK_PB7 2 &pcfg_pull_none>;
- };
-
- uart3_cts: uart3-cts {
- rockchip,pins =
- <3 RK_PC0 2 &pcfg_pull_none>;
- };
-
- uart3_rts: uart3-rts {
- rockchip,pins =
- <3 RK_PC1 2 &pcfg_pull_none>;
- };
- };
-
- uart4 {
- uart4_xfer: uart4-xfer {
- rockchip,pins =
- <1 RK_PA7 1 &pcfg_pull_up>,
- <1 RK_PB0 1 &pcfg_pull_none>;
- };
- };
-
- uarthdcp {
- uarthdcp_xfer: uarthdcp-xfer {
- rockchip,pins =
- <4 RK_PC5 2 &pcfg_pull_up>,
- <4 RK_PC6 2 &pcfg_pull_none>;
- };
- };
-
- pwm0 {
- pwm0_pin: pwm0-pin {
- rockchip,pins =
- <4 RK_PC2 1 &pcfg_pull_none>;
- };
-
- pwm0_pin_pull_down: pwm0-pin-pull-down {
- rockchip,pins =
- <4 RK_PC2 1 &pcfg_pull_down>;
- };
-
- vop0_pwm_pin: vop0-pwm-pin {
- rockchip,pins =
- <4 RK_PC2 2 &pcfg_pull_none>;
- };
-
- vop1_pwm_pin: vop1-pwm-pin {
- rockchip,pins =
- <4 RK_PC2 3 &pcfg_pull_none>;
- };
- };
-
- pwm1 {
- pwm1_pin: pwm1-pin {
- rockchip,pins =
- <4 RK_PC6 1 &pcfg_pull_none>;
- };
-
- pwm1_pin_pull_down: pwm1-pin-pull-down {
- rockchip,pins =
- <4 RK_PC6 1 &pcfg_pull_down>;
- };
- };
-
- pwm2 {
- pwm2_pin: pwm2-pin {
- rockchip,pins =
- <1 RK_PC3 1 &pcfg_pull_none>;
- };
-
- pwm2_pin_pull_down: pwm2-pin-pull-down {
- rockchip,pins =
- <1 RK_PC3 1 &pcfg_pull_down>;
- };
- };
-
- pwm3a {
- pwm3a_pin: pwm3a-pin {
- rockchip,pins =
- <0 RK_PA6 1 &pcfg_pull_none>;
- };
- };
-
- pwm3b {
- pwm3b_pin: pwm3b-pin {
- rockchip,pins =
- <1 RK_PB6 1 &pcfg_pull_none>;
- };
- };
-
- hdmi {
- hdmi_i2c_xfer: hdmi-i2c-xfer {
- rockchip,pins =
- <4 RK_PC1 3 &pcfg_pull_none>,
- <4 RK_PC0 3 &pcfg_pull_none>;
- };
-
- hdmi_cec: hdmi-cec {
- rockchip,pins =
- <4 RK_PC7 1 &pcfg_pull_none>;
- };
- };
-
- pcie {
- pcie_clkreqn_cpm: pci-clkreqn-cpm {
- rockchip,pins =
- <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie_clkreqnb_cpm: pci-clkreqnb-cpm {
- rockchip,pins =
- <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- };
+&gpu {
+ operating-points-v2 = <&gpu_opp_table>;
};
/dts-v1/;
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
#include <arm/rockchip/rockchip-radxa-dalang-carrier.dtsi>
#include "rk3399pro-vmarc-som.dtsi"
};
&i2c2 {
- pintctrl-names = "default";
+ pinctrl-names = "default";
pinctrl-0 = <&i2c2m1_xfer>;
status = "okay";
};
&i2c2 {
- pintctrl-names = "default";
+ pinctrl-names = "default";
pinctrl-0 = <&i2c2m1_xfer>;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&pmucru CLK_RTC_32K>;
- clock-names = "ext_clock";
- device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
- host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ clock-names = "txco";
+ device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include "rk3566.dtsi"
+
+/ {
+ model = "LCKFB Taishan Pi RK3566";
+ compatible = "lckfb,tspi-rk3566", "rockchip,rk3566";
+
+ aliases {
+ mmc0 = &sdmmc0;
+ mmc1 = &sdhci;
+ mmc2 = &sdmmc1;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops: ramoops@110000 {
+ compatible = "ramoops";
+ reg = <0 0x110000 0 0xf0000>;
+ console-size = <0x80000>;
+ ftrace-size = <0x00000>;
+ pmsg-size = <0x50000>;
+ record-size = <0x20000>;
+ };
+ };
+
+ adc_keys: adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-recovery {
+ label = "recovery";
+ linux,code = <KEY_RESTART>;
+ press-threshold-microvolt = <108>;
+ };
+ };
+
+ hdmi_con: hdmi-con {
+ compatible = "hdmi-connector";
+ type = "d";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ rgb_led_r: rgb-led-r {
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "status-red";
+ };
+
+ rgb_led_g: rgb-led-g {
+ gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "status-green";
+ };
+
+ rgb_led_b: rgb-led-b {
+ gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_BLUE>;
+ label = "status-blue";
+ };
+ };
+
+ multi_leds: multi-led {
+ compatible = "leds-group-multicolor";
+ color = <LED_COLOR_ID_RGB>;
+ label = "status-rgb";
+ function = LED_FUNCTION_INDICATOR;
+ leds = <&rgb_led_r>, <&rgb_led_g>, <&rgb_led_b>;
+ };
+
+ vcc12v0_dcin: regulator-12v0-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v0_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc3v3_sys: regulator-3v3-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v0_dcin>;
+ };
+
+ vcc5v0_host: regulator-5v0-vcc-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Analog RK809";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rk809>;
+ };
+ };
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&combphy2 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+ assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ clock-names = "mclk";
+ clocks = <&cru I2S1_MCLKOUT_TX>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+ rockchip,system-power-controller;
+ #sound-dai-cells = <0>;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-name = "vdd_npu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-name = "vdda0v9_image";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-name = "vcca1v8_image";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-name = "vcc3v3_sd";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+
+ codec {
+ rockchip,mic-in-differential;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ /* Touch Screen */
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4m0_xfer>;
+ status = "okay";
+ /* Camera */
+};
+
+&i2s0_8ch {
+ status = "okay";
+ /* HDMI */
+};
+
+&i2s1_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+ /* PMIC */
+};
+
+&i2s2_2ch {
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+ /* AP6212 Bluetooth */
+};
+
+&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hp-detect {
+ hp_det: hp-det {
+ rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_host_wake_h: wifi-host-wake-l {
+ rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_1v8>;
+ vccio7-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&pmugrf {
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x200>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-loader = <BOOT_BL_DOWNLOAD>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ };
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "okay";
+ /* Channel 0: Recovery Button */
+ /* Channel 1: Hardware ID */
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ max-frequency = <150000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vcc_1v8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_h>;
+ };
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth: bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk809 1>;
+ clock-names = "lpo";
+ max-speed = <3000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_sys>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_sys>;
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb2phy1_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
- supports-emmc;
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-M1S";
+ compatible = "hardkernel,odroid-m1s", "rockchip,rk3566";
+
+ aliases {
+ ethernet0 = &gmac1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc0;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_led>, <&sys_led>;
+
+ led_pwr: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ led_sys: led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc3v3_lcd: regulator-3v3-vcc-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwren>;
+ regulator-name = "vcc3v3_lcd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_pcie: regulator-3v3-vcc-pcie {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwren>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_sys: regulator-3v3-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_host_pwren>;
+ regulator-name = "vcc5v0_usb2_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb2_otg: regulator-5v0-vcc-usb2-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_otg_pwren>;
+ regulator-name = "vcc5v0_usb2_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb3_host: regulator-5v0-vcc-usb3-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_host_pwren>;
+ regulator-name = "vcc5v0_usb3_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Analog RK809";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rk809>;
+ };
+ };
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&combphy2 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+ clock_in_out = "input";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m1_miim
+ &gmac1m1_tx_bus2
+ &gmac1m1_rx_bus2
+ &gmac1m1_rgmii_clk
+ &gmac1m1_rgmii_bus
+ &gmac1m1_clkinout>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1390000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+ assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+ #clock-cells = <1>;
+ clocks = <&cru I2S1_MCLKOUT_TX>;
+ clock-names = "mclk";
+ clock-output-names = "rk809-clkout1", "rk809-clkout2";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+ #sound-dai-cells = <0>;
+ system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-name = "vdd_npu";
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-name = "vdda0v9_image";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-name = "vcca1v8_image";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-name = "vcc3v3_sd";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2s0_8ch {
+ status = "okay";
+};
+
+&i2s1_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclktx
+ &i2s1m0_lrcktx
+ &i2s1m0_sdi0
+ &i2s1m0_sdo0>;
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie2x1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20_pins>;
+ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pinctrl {
+ lcd {
+ lcd_pwren: lcd-pwren {
+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ pwr_led: pwr-led {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sys_led: sys-led {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie20_pins: pcie20-pins {
+ rockchip,pins =
+ <1 RK_PB0 4 &pcfg_pull_none>,
+ <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PB1 4 &pcfg_pull_none>;
+ };
+
+ pcie_pwren: pcie-pwren {
+ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ usb2_host_pwren: usb2-host-pwren {
+ rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb2_otg_pwren: usb2-otg-pwren {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb3_host_pwren: usb3-host-pwren {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_3v3>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_3v3>;
+ vccio7-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ sd-uhs-sdr50;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb3_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb2_otg>;
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb2phy1_host {
+ phy-supply = <&vcc5v0_usb2_host>;
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ phy-supply = <&vcc5v0_usb2_host>;
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
compatible = "brcm,bcm43438-bt";
clocks = <&rk817 1>;
clock-names = "lpo";
- device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
- host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+ device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
pinctrl-names = "default";
+ shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
vbat-supply = <&vcc_wl>;
vddio-supply = <&vcca_1v8_pmu>;
};
};
&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
+ shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
vbat-supply = <&vcc_3v3>;
vddio-supply = <&vcc_1v8>;
};
};
&usb_host0_xhci {
- dr_mode = "peripheral";
status = "okay";
};
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
- max-frequency = <150000000>;
no-sdio;
no-mmc;
+ sd-uhs-sdr50;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
vmmc-supply = <&vcc3v3_sd>;
&gmac0_rx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus>;
- snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- /* Reset time is 15ms, 50ms for rtl8211f */
- snps,reset-delays-us = <0 15000 50000>;
- tx_delay = <0x3c>;
- rx_delay = <0x2f>;
status = "okay";
};
&gmac1m1_rx_bus2
&gmac1m1_rgmii_clk
&gmac1m1_rgmii_bus>;
- snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- /* Reset time is 15ms, 50ms for rtl8211f */
- snps,reset-delays-us = <0 15000 50000>;
- tx_delay = <0x4f>;
- rx_delay = <0x26>;
status = "okay";
};
reg = <0x1>;
pinctrl-0 = <ð_phy0_reset_pin>;
pinctrl-names = "default";
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
};
};
reg = <0x1>;
pinctrl-0 = <ð_phy1_reset_pin>;
pinctrl-names = "default";
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
};
};
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
- supports-emmc;
status = "okay";
};
};
};
+&can0 {
+ compatible = "rockchip,rk3568v3-canfd", "rockchip,rk3568v2-canfd";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0m0_pins>;
+ status = "okay";
+};
+
+&can1 {
+ compatible = "rockchip,rk3568v3-canfd", "rockchip,rk3568v2-canfd";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can1m1_pins>;
+ status = "okay";
+};
+
&combphy0 {
status = "okay";
};
/ {
model = "Hardkernel ODROID-M1";
- compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
+ compatible = "hardkernel,odroid-m1", "rockchip,rk3568";
aliases {
ethernet0 = &gmac0;
/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include "rk3568.dtsi"
/ {
model = "Qnap TS-433-4G NAS System 4-Bay";
compatible = "qnap,ts433", "rockchip,rk3568";
+
+ aliases {
+ ethernet0 = &gmac0;
+ mmc0 = &sdhci;
+ rtc0 = &rtc_rv8263;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <©_button_pin>, <&reset_button_pin>;
+ pinctrl-names = "default";
+
+ key-copy {
+ label = "copy";
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_COPY>;
+ };
+
+ key-reset {
+ label = "reset";
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdd1_led_pin>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdd2_led_pin>;
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdd3_led_pin>;
+ };
+
+ led-3 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdd4_led_pin>;
+ };
+ };
+
+ dc_12v: regulator-dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc3v3_pcie: regulator-vcc3v3-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc3v3_sys: regulator-vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_host: regulator-vcc5v0-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_otg: regulator-vcc5v0-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_otg_en>;
+ regulator-name = "vcc5v0_otg";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_usb: regulator-vcc5v0-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+};
+
+/* connected to usb_host0_xhci */
+&combphy0 {
+ status = "okay";
+};
+
+/* connected to sata1 */
+&combphy1 {
+ status = "okay";
+};
+
+/* connected to sata2 */
+&combphy2 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
};
&gmac0 {
assigned-clock-rates = <0>, <125000000>;
clock_in_out = "output";
phy-handle = <&rgmii_phy0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
&gmac0_tx_bus2
&gmac0_rx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus>;
- rx_delay = <0x2f>;
- tx_delay = <0x3c>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
status = "okay";
};
&i2c0 {
+ status = "okay";
+
pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ system-power-controller;
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ wakeup-source;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-name = "vdd_npu";
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-name = "vdda0v9_image";
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-name = "vcca1v8_image";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-name = "vcc3v3_sd";
+ /*
+ * turning this off, breaks access to both
+ * PCIe controllers, refclk generator perhaps
+ */
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1390000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
};
};
&i2c1 {
status = "okay";
- rtc@51 {
+ rtc_rv8263: rtc@51 {
compatible = "microcrystal,rv8263";
reg = <0x51>;
wakeup-source;
};
+
+ /* eeprom for vital-product-data on the mainboard */
+ eeprom@54 {
+ compatible = "giantec,gt24c04a", "atmel,24c04";
+ reg = <0x54>;
+ label = "VPD_MB";
+ num-addresses = <2>;
+ pagesize = <16>;
+ read-only;
+ };
+
+ /* eeprom for vital-product-data on the backplane */
+ eeprom@56 {
+ compatible = "giantec,gt24c04a", "atmel,24c04";
+ reg = <0x56>;
+ label = "VPD_BP";
+ num-addresses = <2>;
+ pagesize = <16>;
+ read-only;
+ };
};
&mdio0 {
};
&pcie30phy {
+ data-lanes = <1 2>;
status = "okay";
};
+/* Connected to a JMicron AHCI SATA controller */
&pcie3x1 {
- /* The downstream dts has: rockchip,bifurcation, XXX: find out what this is about */
reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+/* Connected to the 2.5G NIC for the upper network jack */
+&pcie3x2 {
+ num-lanes = <1>;
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pinctrl {
+ keys {
+ copy_button_pin: copy-button-pin {
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ reset_button_pin: reset-button-pin {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ hdd1_led_pin: hdd1-led-pin {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ hdd2_led_pin: hdd2-led-pin {
+ rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ hdd3_led_pin: hdd3-led-pin {
+ rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ hdd4_led_pin: hdd4_led-pin {
+ rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_otg_en: vcc5v0-otg-en {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ vccio4-supply = <&vcc_1v8>;
+ vccio6-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata2 {
status = "okay";
};
status = "okay";
};
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+/*
+ * Connected to an MCU, that provides access to more LEDs,
+ * buzzer, fan control and more.
+ */
+&uart0 {
+ status = "okay";
+};
+
/*
* Pins available on CN3 connector at TTL voltage level (3V3).
* ,_ _.
&uart2 {
status = "okay";
};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+/* connected to usb_host0_xhci */
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_otg>;
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+/* connected to usb_host1_ehci/ohci */
+&usb2phy1_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+/* connected to usb_host0_ehci/ohci */
+&usb2phy1_otg {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+/* right port backside */
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+/* front port */
+&usb_host0_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* left port backside */
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
cpu-supply = <&vdd_cpu>;
};
-&display_subsystem {
- status = "disabled";
-};
-
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
phy-supply = <&vcc3v3_pcie30x1>;
};
+&display_subsystem {
+ status = "disabled";
+};
+
&pcie2x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie20_reset_h>;
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device tree overlay for the WolfVision PF5 Visualizer display.
+ *
+ * Copyright (C) 2024 WolfVision GmbH.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "rk3568-wolfvision-pf5-display.dtsi"
+
+&st7789 {
+ compatible = "jasonic,jt240mhqs-hwt-ek-e3",
+ "sitronix,st7789v";
+ rotation = <270>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device tree overlay base for the WolfVision PF5 displays.
+ *
+ * Copyright (C) 2024 WolfVision GmbH.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rk3568-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+
+&{/} {
+ display_backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 255>;
+ default-brightness-level = <255>;
+ num-interpolated-steps = <255>;
+ power-supply = <&vcc3v3_sd>;
+ pwms = <&pwm10 0 1000000 0>;
+ };
+
+ display_spi: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+ miso-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_spi>;
+ sck-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+
+ st7789: panel@0 {
+ compatible = "sitronix,st7789v";
+ reg = <0>;
+ assigned-clocks = <&cru PLL_VPLL>;
+ assigned-clock-rates = <700000000>;
+ backlight = <&display_backlight>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdc_clock &lcdc_data18 &lcd_rstn>;
+ power-supply = <&vcc3v3_sw>;
+ reset-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <100000>;
+
+ port {
+ panel_in_vp2: endpoint {
+ remote-endpoint = <&vp2_out_rgb>;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ st1624: touchscreen@55 {
+ compatible = "sitronix,st1624", "sitronix,st1633";
+ reg = <0x55>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_int &touch_rstn>;
+ wakeup-source;
+ };
+};
+
+&pinctrl {
+ display: display-pinctrl {
+ lcd_rstn: lcd-rstn-pinctrl {
+ rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ lcd_spi: lcd-spi-pinctrl {
+ rockchip,pins =
+ /* lcd_sdo */
+ <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>,
+ /* lcd_csn */
+ <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>,
+ /* lcd_scl */
+ <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
+ /* lcd_sdi */
+ <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ touchscreen: touchscreen-pinctrl {
+ touch_int: touch-int-pinctrl {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ touch_rstn: touch-rstn-pinctrl {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm10m1_pins>;
+ status = "okay";
+};
+
+&vp2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp2_out_rgb: endpoint@ROCKCHIP_VOP2_EP_RGB0 {
+ reg = <ROCKCHIP_VOP2_EP_RGB0>;
+ remote-endpoint = <&panel_in_vp2>;
+ };
+};
};
};
+ can0: can@fe570000 {
+ compatible = "rockchip,rk3568v2-canfd";
+ reg = <0x0 0xfe570000 0x0 0x1000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_CAN0>, <&cru PCLK_CAN0>;
+ clock-names = "baud", "pclk";
+ resets = <&cru SRST_CAN0>, <&cru SRST_P_CAN0>;
+ reset-names = "core", "apb";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0m0_pins>;
+ status = "disabled";
+ };
+
+ can1: can@fe580000 {
+ compatible = "rockchip,rk3568v2-canfd";
+ reg = <0x0 0xfe580000 0x0 0x1000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_CAN1>, <&cru PCLK_CAN1>;
+ clock-names = "baud", "pclk";
+ resets = <&cru SRST_CAN1>, <&cru SRST_P_CAN1>;
+ reset-names = "core", "apb";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can1m0_pins>;
+ status = "disabled";
+ };
+
+ can2: can@fe590000 {
+ compatible = "rockchip,rk3568v2-canfd";
+ reg = <0x0 0xfe590000 0x0 0x1000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_CAN2>, <&cru PCLK_CAN2>;
+ clock-names = "baud", "pclk";
+ resets = <&cru SRST_CAN2>, <&cru SRST_P_CAN2>;
+ reset-names = "core", "apb";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can2m0_pins>;
+ status = "disabled";
+ };
+
combphy0: phy@fe820000 {
compatible = "rockchip,rk3568-naneng-combphy";
reg = <0x0 0xfe820000 0x0 0x100>;
};
};
+&rng {
+ status = "okay";
+};
+
&usb_host0_xhci {
phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
phy-names = "usb2-phy", "usb3-phy";
status = "disabled";
};
+ rng: rng@fe388000 {
+ compatible = "rockchip,rk3568-rng";
+ reg = <0x0 0xfe388000 0x0 0x4000>;
+ clocks = <&cru CLK_TRNG_NS>, <&cru HCLK_TRNG_NS>;
+ clock-names = "core", "ahb";
+ resets = <&cru SRST_TRNG_NS>;
+ status = "disabled";
+ };
+
i2s0_8ch: i2s@fe400000 {
compatible = "rockchip,rk3568-i2s-tdm";
reg = <0x0 0xfe400000 0x0 0x1000>;
/* sdio_clk_m1 */
<3 RK_PA5 2 &pcfg_pull_none>,
/* sdio_cmd_m1 */
- <3 RK_PA4 2 &pcfg_pull_none>,
+ <3 RK_PA4 2 &pcfg_pull_up>,
/* sdio_d0_m1 */
- <3 RK_PA0 2 &pcfg_pull_none>,
+ <3 RK_PA0 2 &pcfg_pull_up>,
/* sdio_d1_m1 */
- <3 RK_PA1 2 &pcfg_pull_none>,
+ <3 RK_PA1 2 &pcfg_pull_up>,
/* sdio_d2_m1 */
- <3 RK_PA2 2 &pcfg_pull_none>,
+ <3 RK_PA2 2 &pcfg_pull_up>,
/* sdio_d3_m1 */
- <3 RK_PA3 2 &pcfg_pull_none>;
+ <3 RK_PA3 2 &pcfg_pull_up>;
};
};
cache-unified;
next-level-cache = <&l3_cache>;
};
+ };
- l3_cache: l3-cache {
- compatible = "cache";
- cache-size = <3145728>;
- cache-line-size = <64>;
- cache-sets = <4096>;
- cache-level = <3>;
- cache-unified;
- };
+ /*
+ * The L3 cache belongs to the DynamIQ Shared Unit (DSU),
+ * so it's represented here, outside the "cpus" node
+ */
+ l3_cache: l3-cache {
+ compatible = "cache";
+ cache-size = <3145728>;
+ cache-line-size = <64>;
+ cache-sets = <4096>;
+ cache-level = <3>;
+ cache-unified;
};
display_subsystem: display-subsystem {
};
};
+ vpu121: video-codec@fdb50000 {
+ compatible = "rockchip,rk3588-vpu121", "rockchip,rk3568-vpu";
+ reg = <0x0 0xfdb50000 0x0 0x800>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vdpu";
+ clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ clock-names = "aclk", "hclk";
+ iommus = <&vpu121_mmu>;
+ power-domains = <&power RK3588_PD_VDPU>;
+ };
+
+ vpu121_mmu: iommu@fdb50800 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdb50800 0x0 0x40>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-names = "aclk", "iface";
+ clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ power-domains = <&power RK3588_PD_VDPU>;
+ #iommu-cells = <0>;
+ };
+
+ rga: rga@fdb80000 {
+ compatible = "rockchip,rk3588-rga", "rockchip,rk3288-rga";
+ reg = <0x0 0xfdb80000 0x0 0x180>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_RGA2>, <&cru HCLK_RGA2>, <&cru CLK_RGA2_CORE>;
+ clock-names = "aclk", "hclk", "sclk";
+ resets = <&cru SRST_RGA2_CORE>, <&cru SRST_A_RGA2>, <&cru SRST_H_RGA2>;
+ reset-names = "core", "axi", "ahb";
+ power-domains = <&power RK3588_PD_VDPU>;
+ };
+
+ vepu121_0: video-codec@fdba0000 {
+ compatible = "rockchip,rk3588-vepu121";
+ reg = <0x0 0xfdba0000 0x0 0x800>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_JPEG_ENCODER0>, <&cru HCLK_JPEG_ENCODER0>;
+ clock-names = "aclk", "hclk";
+ iommus = <&vepu121_0_mmu>;
+ power-domains = <&power RK3588_PD_VDPU>;
+ };
+
+ vepu121_0_mmu: iommu@fdba0800 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdba0800 0x0 0x40>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_JPEG_ENCODER0>, <&cru HCLK_JPEG_ENCODER0>;
+ clock-names = "aclk", "iface";
+ power-domains = <&power RK3588_PD_VDPU>;
+ #iommu-cells = <0>;
+ };
+
+ vepu121_1: video-codec@fdba4000 {
+ compatible = "rockchip,rk3588-vepu121";
+ reg = <0x0 0xfdba4000 0x0 0x800>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_JPEG_ENCODER1>, <&cru HCLK_JPEG_ENCODER1>;
+ clock-names = "aclk", "hclk";
+ iommus = <&vepu121_1_mmu>;
+ power-domains = <&power RK3588_PD_VDPU>;
+ };
+
+ vepu121_1_mmu: iommu@fdba4800 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdba4800 0x0 0x40>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_JPEG_ENCODER1>, <&cru HCLK_JPEG_ENCODER1>;
+ clock-names = "aclk", "iface";
+ power-domains = <&power RK3588_PD_VDPU>;
+ #iommu-cells = <0>;
+ };
+
+ vepu121_2: video-codec@fdba8000 {
+ compatible = "rockchip,rk3588-vepu121";
+ reg = <0x0 0xfdba8000 0x0 0x800>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_JPEG_ENCODER2>, <&cru HCLK_JPEG_ENCODER2>;
+ clock-names = "aclk", "hclk";
+ iommus = <&vepu121_2_mmu>;
+ power-domains = <&power RK3588_PD_VDPU>;
+ };
+
+ vepu121_2_mmu: iommu@fdba8800 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdba8800 0x0 0x40>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_JPEG_ENCODER2>, <&cru HCLK_JPEG_ENCODER2>;
+ clock-names = "aclk", "iface";
+ power-domains = <&power RK3588_PD_VDPU>;
+ #iommu-cells = <0>;
+ };
+
+ vepu121_3: video-codec@fdbac000 {
+ compatible = "rockchip,rk3588-vepu121";
+ reg = <0x0 0xfdbac000 0x0 0x800>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_JPEG_ENCODER3>, <&cru HCLK_JPEG_ENCODER3>;
+ clock-names = "aclk", "hclk";
+ iommus = <&vepu121_3_mmu>;
+ power-domains = <&power RK3588_PD_VDPU>;
+ };
+
+ vepu121_3_mmu: iommu@fdbac800 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdbac800 0x0 0x40>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_JPEG_ENCODER3>, <&cru HCLK_JPEG_ENCODER3>;
+ clock-names = "aclk", "iface";
+ power-domains = <&power RK3588_PD_VDPU>;
+ #iommu-cells = <0>;
+ };
+
av1d: video-codec@fdc70000 {
compatible = "rockchip,rk3588-av1-vpu";
reg = <0x0 0xfdc70000 0x0 0x800>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "rk3588-coolpi-cm5.dtsi"
+
+/ {
+ model = "CoolPi CM5 GenBook";
+ compatible = "coolpi,pi-cm5-genbook", "coolpi,pi-cm5", "rockchip,rk3588";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en>;
+ power-supply = <&vcc12v_dcin>;
+ pwms = <&pwm6 0 25000 0>;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <9800000>;
+ voltage-max-design-microvolt = <4350000>;
+ voltage-min-design-microvolt = <3000000>;
+ };
+
+ charger: dc-charger {
+ compatible = "gpio-charger";
+ charger-type = "mains";
+ gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ heartbeat_led: led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ wlan_led: led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ };
+
+ charging_red: led-2 {
+ function = LED_FUNCTION_CHARGING;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <7000000>;
+ regulator-max-microvolt = <7000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <7000000>;
+ regulator-max-microvolt = <7000000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_lcd: vcc3v3-lcd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_lcd";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdpwr_en>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pwren>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_usb_host0: vcc5v0_usb30_host: vcc5v0-usb-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwren>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4m3_xfer>;
+
+ cw2015@62 {
+ compatible = "cellwise,cw2015";
+ reg = <0x62>;
+
+ cellwise,battery-profile = /bits/ 8 <
+ 0x17 0x67 0x69 0x63 0x63 0x62 0x62 0x5F
+ 0x52 0x73 0x4C 0x5A 0x5B 0x4B 0x42 0x3A
+ 0x33 0x2D 0x29 0x28 0x2E 0x31 0x3C 0x49
+ 0x2C 0x2C 0x0C 0xCD 0x30 0x51 0x50 0x66
+ 0x74 0x74 0x75 0x78 0x41 0x1B 0x84 0x5F
+ 0x0B 0x34 0x1C 0x45 0x89 0x92 0xA0 0x13
+ 0x2C 0x55 0xAB 0xCB 0x80 0x5E 0x7B 0xCB
+ 0x2F 0x00 0x64 0xA5 0xB5 0x10 0x18 0x21
+ >;
+
+ cellwise,monitor-interval-ms = <3000>;
+ monitored-battery = <&battery>;
+ power-supplies = <&charger>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5m3_xfer>;
+
+ touchpad: touchpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
+ hid-descr-addr = <0x0020>;
+ };
+};
+
+&gmac0 {
+ status = "disabled";
+};
+
+/* M.2 E-Key */
+&pcie2x1l0 {
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
+ status = "okay";
+};
+
+&pcie2x1l2 {
+ status = "disabled";
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+/* M.2 M-Key ssd */
+&pcie3x4 {
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+ status = "okay";
+};
+
+&pinctrl {
+ lcd {
+ lcdpwr_en: lcdpwr-en {
+ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bl_en: bl-en {
+ rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb_pwren: usb-pwren {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ usb_otg_pwren: usb-otg-pwren {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ usb_host_pwren: usb-host-pwren {
+ rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wifi {
+ bt_pwron: bt-pwron {
+ rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pcie_clkreq: pcie-clkreq {
+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pcie_rst: pcie-rst {
+ rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ wifi_pwron: wifi-pwron {
+ rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pcie_wake: pcie-wake {
+ rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm6 {
+ pinctrl-0 = <&pwm6m1_pins>;
+ status = "okay";
+};
+
+&sdmmc {
+ status = "disabled";
+};
+
+&sfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim2_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <100000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&usbdp_phy0 {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_usb_host0>;
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_usb>;
+ status = "okay";
+};
+
+&usbdp_phy1 {
+ status = "okay";
+};
+
+/* For Keypad */
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+/* Type C port */
+&usb_host0_xhci {
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+ status = "okay";
+};
+
+/* connected to a HUB for camera and BT */
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+/* USB A out */
+&usb_host1_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Thomas McKahan
+ * Copyright (c) 2024 Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "rk3588-nanopc-t6.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPC-T6 LTS";
+ compatible = "friendlyarm,nanopc-t6-lts", "rockchip,rk3588";
+
+ /* provide power for on-board USB 2.0 hub */
+ vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb20_host_pwren>;
+ pinctrl-names = "default";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "vcc5v0_usb20_host";
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&pinctrl {
+ usb {
+ usb20_host_pwren: usb20-host-pwren {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_usb20_host>;
+};
+
+&usbdp_phy1 {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
/*
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
* Copyright (c) 2023 Thomas McKahan
+ * Copyright (c) 2024 Linaro Ltd.
*
*/
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/usb/pd.h>
-#include "rk3588.dtsi"
+#include "rk3588-nanopc-t6.dtsi"
/ {
model = "FriendlyElec NanoPC-T6";
compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
- aliases {
- mmc0 = &sdhci;
- mmc1 = &sdmmc;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- sys_led: led-0 {
- gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
- label = "system-led";
- linux,default-trigger = "heartbeat";
- pinctrl-names = "default";
- pinctrl-0 = <&sys_led_pin>;
- };
-
- usr_led: led-1 {
- gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
- label = "user-led";
- pinctrl-names = "default";
- pinctrl-0 = <&usr_led_pin>;
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- pinctrl-names = "default";
- pinctrl-0 = <&hp_det>;
-
- simple-audio-card,name = "realtek,rt5616-codec";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
-
- simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
- simple-audio-card,hp-pin-name = "Headphones";
-
- simple-audio-card,widgets =
- "Headphone", "Headphones",
- "Microphone", "Microphone Jack";
- simple-audio-card,routing =
- "Headphones", "HPOL",
- "Headphones", "HPOR",
- "MIC1", "Microphone Jack",
- "Microphone Jack", "micbias1";
-
- simple-audio-card,cpu {
- sound-dai = <&i2s0_8ch>;
- };
- simple-audio-card,codec {
- sound-dai = <&rt5616>;
- };
- };
-
- vcc12v_dcin: vcc12v-dcin-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc12v_dcin";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- /* vcc5v0_sys powers peripherals */
- vcc5v0_sys: vcc5v0-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- /* vcc4v0_sys powers the RK806, RK860's */
- vcc4v0_sys: vcc4v0-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc4v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <4000000>;
- regulator-max-microvolt = <4000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc-1v1-nldo-s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- vin-supply = <&vcc4v0_sys>;
- };
-
- vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_pcie20";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_3v3_s3>;
- };
-
- vbus5v0_typec: vbus5v0-typec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&typec5v_pwren>;
- regulator-name = "vbus5v0_typec";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_m2_1_pwren>;
- regulator-name = "vcc3v3_pcie2x1l0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc3v3_pcie30: vcc3v3-pcie30-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_m2_0_pwren>;
- regulator-name = "vcc3v3_pcie30";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc3v3_sd_s0: vcc3v3-sd-s0-regulator {
- compatible = "regulator-fixed";
- enable-active-low;
- gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
- regulator-boot-on;
- regulator-max-microvolt = <3300000>;
- regulator-min-microvolt = <3300000>;
- regulator-name = "vcc3v3_sd_s0";
- vin-supply = <&vcc_3v3_s3>;
- };
-
vdd_4g_3v3: vdd-4g-3v3-regulator {
compatible = "regulator-fixed";
enable-active-high;
};
};
-&combphy0_ps {
- status = "okay";
-};
-
-&combphy1_ps {
- status = "okay";
-};
-
-&combphy2_psu {
- status = "okay";
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b2 {
- cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_b3 {
- cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&gpio0 {
- gpio-line-names = /* GPIO0 A0-A7 */
- "", "", "", "",
- "", "", "", "",
- /* GPIO0 B0-B7 */
- "", "", "", "",
- "", "", "", "",
- /* GPIO0 C0-C7 */
- "", "", "", "",
- "HEADER_10", "HEADER_08", "HEADER_32", "",
- /* GPIO0 D0-D7 */
- "", "", "", "",
- "", "", "", "";
-};
-
-&gpio1 {
- gpio-line-names = /* GPIO1 A0-A7 */
- "HEADER_27", "HEADER_28", "", "",
- "", "", "", "HEADER_15",
- /* GPIO1 B0-B7 */
- "HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23",
- "HEADER_24", "HEADER_22", "", "",
- /* GPIO1 C0-C7 */
- "", "", "", "",
- "", "", "", "",
- /* GPIO1 D0-D7 */
- "", "", "", "",
- "", "", "HEADER_05", "HEADER_03";
-};
-
-&gpio2 {
- gpio-line-names = /* GPIO2 A0-A7 */
- "", "", "", "",
- "", "", "", "",
- /* GPIO2 B0-B7 */
- "", "", "", "",
- "", "", "", "",
- /* GPIO2 C0-C7 */
- "", "CSI1_11", "CSI1_12", "",
- "", "", "", "",
- /* GPIO2 D0-D7 */
- "", "", "", "",
- "", "", "", "";
-};
-
-&gpio3 {
- gpio-line-names = /* GPIO3 A0-A7 */
- "HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36",
- "HEADER_37", "", "DSI0_12", "",
- /* GPIO3 B0-B7 */
- "HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16",
- "HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12",
- /* GPIO3 C0-C7 */
- "DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13",
- "", "", "", "",
- /* GPIO3 D0-D7 */
- "", "", "", "",
- "", "DSI1_10", "", "";
-};
-
-&gpio4 {
- gpio-line-names = /* GPIO4 A0-A7 */
- "DSI1_08", "DSI1_14", "", "DSI1_12",
- "", "", "", "",
- /* GPIO4 B0-B7 */
- "", "", "", "",
- "", "", "", "",
- /* GPIO4 C0-C7 */
- "", "", "", "",
- "CSI0_11", "CSI0_12", "", "",
- /* GPIO4 D0-D7 */
- "", "", "", "",
- "", "", "", "";
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0m2_xfer>;
- status = "okay";
-
- vdd_cpu_big0_s0: regulator@42 {
- compatible = "rockchip,rk8602";
- reg = <0x42>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_big0_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1050000>;
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc4v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_big1_s0: regulator@43 {
- compatible = "rockchip,rk8603", "rockchip,rk8602";
- reg = <0x43>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_big1_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1050000>;
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc4v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c2 {
- status = "okay";
-
- vdd_npu_s0: regulator@42 {
- compatible = "rockchip,rk8602";
- reg = <0x42>;
- rockchip,suspend-voltage-selector = <1>;
- regulator-name = "vdd_npu_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc4v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c6 {
- clock-frequency = <200000>;
- status = "okay";
-
- fusb302: typec-portc@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-0 = <&usbc0_int>;
- pinctrl-names = "default";
- vbus-supply = <&vbus5v0_typec>;
-
- connector {
- compatible = "usb-c-connector";
- data-role = "dual";
- label = "USB-C";
- power-role = "dual";
- try-power-role = "sink";
- source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- op-sink-microwatt = <1000000>;
- };
- };
-
- hym8563: rtc@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-output-names = "hym8563";
- pinctrl-names = "default";
- pinctrl-0 = <&hym8563_int>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
- wakeup-source;
- };
-};
-
-&i2c7 {
- clock-frequency = <200000>;
- status = "okay";
-
- rt5616: codec@1b {
- compatible = "realtek,rt5616";
- reg = <0x1b>;
- clocks = <&cru I2S0_8CH_MCLKOUT>;
- clock-names = "mclk";
- #sound-dai-cells = <0>;
- assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
- assigned-clock-rates = <12288000>;
-
- port {
- rt5616_p0_0: endpoint {
- remote-endpoint = <&i2s0_8ch_p0_0>;
- };
- };
- };
-
- /* connected with MIPI-CSI1 */
-};
-
-&i2c8 {
- pinctrl-0 = <&i2c8m2_xfer>;
-};
-
-&i2s0_8ch {
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_lrck
- &i2s0_mclk
- &i2s0_sclk
- &i2s0_sdi0
- &i2s0_sdo0>;
- status = "okay";
-
- i2s0_8ch_p0: port {
- i2s0_8ch_p0_0: endpoint {
- dai-format = "i2s";
- mclk-fs = <256>;
- remote-endpoint = <&rt5616_p0_0>;
- };
- };
-};
-
-&pcie2x1l0 {
- reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc_3v3_pcie20>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie2_0_rst>;
- status = "okay";
-};
-
-&pcie2x1l1 {
- reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie2_1_rst>;
- status = "okay";
-};
-
-&pcie2x1l2 {
- reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc_3v3_pcie20>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie2_2_rst>;
- status = "okay";
-};
-
-&pcie30phy {
- status = "okay";
-};
-
-&pcie3x4 {
- reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie30>;
- status = "okay";
-};
-
&pinctrl {
- gpio-leds {
- sys_led_pin: sys-led-pin {
- rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- usr_led_pin: usr-led-pin {
- rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- headphone {
- hp_det: hp-det {
- rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- hym8563 {
- hym8563_int: hym8563-int {
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pcie {
- pcie2_0_rst: pcie2-0-rst {
- rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie2_1_rst: pcie2-1-rst {
- rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie2_2_rst: pcie2-2-rst {
- rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie_m2_0_pwren: pcie-m20-pwren {
- rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie_m2_1_pwren: pcie-m21-pwren {
- rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
usb {
pin_4g_lte_pwren: 4g-lte-pwren {
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
-
- typec5v_pwren: typec5v-pwren {
- rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- usbc0_int: usbc0-int {
- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&pwm1 {
- pinctrl-0 = <&pwm1m1_pins>;
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&avcc_1v8_s0>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- no-sdio;
- no-sd;
- non-removable;
- max-frequency = <200000000>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
- disable-wp;
- no-mmc;
- no-sdio;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc3v3_sd_s0>;
- vqmmc-supply = <&vccio_sd_s0>;
- status = "okay";
-};
-
-&spi2 {
- status = "okay";
- assigned-clocks = <&cru CLK_SPI2>;
- assigned-clock-rates = <200000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
- num-cs = <1>;
-
- pmic@0 {
- compatible = "rockchip,rk806";
- spi-max-frequency = <1000000>;
- reg = <0x0>;
-
- interrupt-parent = <&gpio0>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
- <&rk806_dvs2_null>, <&rk806_dvs3_null>;
-
- system-power-controller;
-
- vcc1-supply = <&vcc4v0_sys>;
- vcc2-supply = <&vcc4v0_sys>;
- vcc3-supply = <&vcc4v0_sys>;
- vcc4-supply = <&vcc4v0_sys>;
- vcc5-supply = <&vcc4v0_sys>;
- vcc6-supply = <&vcc4v0_sys>;
- vcc7-supply = <&vcc4v0_sys>;
- vcc8-supply = <&vcc4v0_sys>;
- vcc9-supply = <&vcc4v0_sys>;
- vcc10-supply = <&vcc4v0_sys>;
- vcc11-supply = <&vcc_2v0_pldo_s3>;
- vcc12-supply = <&vcc4v0_sys>;
- vcc13-supply = <&vcc_1v1_nldo_s3>;
- vcc14-supply = <&vcc_1v1_nldo_s3>;
- vcca-supply = <&vcc4v0_sys>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- rk806_dvs1_null: dvs1-null-pins {
- pins = "gpio_pwrctrl1";
- function = "pin_fun0";
- };
-
- rk806_dvs2_null: dvs2-null-pins {
- pins = "gpio_pwrctrl2";
- function = "pin_fun0";
- };
-
- rk806_dvs3_null: dvs3-null-pins {
- pins = "gpio_pwrctrl3";
- function = "pin_fun0";
- };
-
- regulators {
- vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_gpu_s0";
- regulator-enable-ramp-delay = <400>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_cpu_lit_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_log_s0: dcdc-reg3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <750000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_log_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <750000>;
- };
- };
-
- vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-init-microvolt = <750000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_vdenc_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_ddr_s0: dcdc-reg5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <900000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_ddr_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <850000>;
- };
- };
-
- vdd2_ddr_s3: dcdc-reg6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vdd2_ddr_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_2v0_pldo_s3: dcdc-reg7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_2v0_pldo_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <2000000>;
- };
- };
-
- vcc_3v3_s3: dcdc-reg8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_3v3_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vddq_ddr_s0: dcdc-reg9 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vddq_ddr_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v8_s3: dcdc-reg10 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_1v8_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- avcc_1v8_s0: pldo-reg1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "avcc_1v8_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v8_s0: pldo-reg2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_1v8_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- avdd_1v2_s0: pldo-reg3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-name = "avdd_1v2_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v3_s0: pldo-reg4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vcc_3v3_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vccio_sd_s0: pldo-reg5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vccio_sd_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- pldo6_s3: pldo-reg6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "pldo6_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vdd_0v75_s3: nldo-reg1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
- regulator-name = "vdd_0v75_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <750000>;
- };
- };
-
- vdd_ddr_pll_s0: nldo-reg2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-name = "vdd_ddr_pll_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <850000>;
- };
- };
-
- avdd_0v75_s0: nldo-reg3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
- regulator-name = "avdd_0v75_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_0v85_s0: nldo-reg4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-name = "vdd_0v85_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_0v75_s0: nldo-reg5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
- regulator-name = "vdd_0v75_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
};
};
-&tsadc {
- status = "okay";
-};
-
-&uart2 {
- pinctrl-0 = <&uart2m0_xfer>;
- status = "okay";
-};
-
&u2phy2_host {
phy-supply = <&vdd_4g_3v3>;
- status = "okay";
-};
-
-&u2phy3_host {
- status = "okay";
-};
-
-&u2phy2 {
- status = "okay";
-};
-
-&u2phy3 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Thomas McKahan
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPC-T6";
+ compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ };
+
+ adc-keys-0 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-maskrom {
+ label = "Mask Rom";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <2000>;
+ };
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_receiver_pin>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sys_led: led-0 {
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ label = "system-led";
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sys_led_pin>;
+ };
+
+ usr_led: led-1 {
+ gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ label = "user-led";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usr_led_pin>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_det>;
+
+ simple-audio-card,name = "realtek,rt5616-codec";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
+
+ simple-audio-card,widgets =
+ "Headphone", "Headphones",
+ "Microphone", "Microphone Jack";
+ simple-audio-card,routing =
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "MIC1", "Microphone Jack",
+ "Microphone Jack", "micbias1";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&rt5616>;
+ };
+ };
+
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ /* vcc5v0_sys powers peripherals */
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ /* vcc4v0_sys powers the RK806, RK860's */
+ vcc4v0_sys: vcc4v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc4v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <4000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-1v1-nldo-s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc4v0_sys>;
+ };
+
+ vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_pcie20";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vbus5v0_typec: vbus5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&typec5v_pwren>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vbus5v0_typec";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_m2_1_pwren>;
+ regulator-name = "vcc3v3_pcie2x1l0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_m2_0_pwren>;
+ regulator-name = "vcc3v3_pcie30";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sd_s0: vcc3v3-sd-s0-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc3v3_sd_s0";
+ vin-supply = <&vcc_3v3_s3>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&gpio0 {
+ gpio-line-names = /* GPIO0 A0-A7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO0 B0-B7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO0 C0-C7 */
+ "", "", "", "",
+ "HEADER_10", "HEADER_08", "HEADER_32", "",
+ /* GPIO0 D0-D7 */
+ "", "", "", "",
+ "IR receiver [PWM3_IR_M0]", "", "", "";
+};
+
+&gpio1 {
+ gpio-line-names = /* GPIO1 A0-A7 */
+ "HEADER_27", "HEADER_28", "", "",
+ "", "", "", "HEADER_15",
+ /* GPIO1 B0-B7 */
+ "HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23",
+ "HEADER_24", "HEADER_22", "", "",
+ /* GPIO1 C0-C7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO1 D0-D7 */
+ "", "", "", "",
+ "", "", "HEADER_05", "HEADER_03";
+};
+
+&gpio2 {
+ gpio-line-names = /* GPIO2 A0-A7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO2 B0-B7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO2 C0-C7 */
+ "", "CSI1_11", "CSI1_12", "",
+ "", "", "", "",
+ /* GPIO2 D0-D7 */
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names = /* GPIO3 A0-A7 */
+ "HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36",
+ "HEADER_37", "", "DSI0_12", "",
+ /* GPIO3 B0-B7 */
+ "HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16",
+ "HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12",
+ /* GPIO3 C0-C7 */
+ "DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13",
+ "", "", "", "",
+ /* GPIO3 D0-D7 */
+ "", "", "", "",
+ "", "DSI1_10", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = /* GPIO4 A0-A7 */
+ "DSI1_08", "DSI1_14", "", "DSI1_12",
+ "", "", "", "",
+ /* GPIO4 B0-B7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO4 C0-C7 */
+ "", "", "", "",
+ "CSI0_11", "CSI0_12", "", "",
+ /* GPIO4 D0-D7 */
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c6 {
+ clock-frequency = <200000>;
+ status = "okay";
+
+ fusb302: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&usbc0_int>;
+ pinctrl-names = "default";
+ vbus-supply = <&vbus5v0_typec>;
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ power-role = "source";
+ source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_hs: endpoint {
+ remote-endpoint = <&usb_host0_xhci_drd_sw>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_ss: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ usbc0_sbu: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_sbu>;
+ };
+ };
+ };
+ };
+ };
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+ };
+};
+
+&i2c7 {
+ clock-frequency = <200000>;
+ status = "okay";
+
+ rt5616: codec@1b {
+ compatible = "realtek,rt5616";
+ reg = <0x1b>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+
+ port {
+ rt5616_p0_0: endpoint {
+ remote-endpoint = <&i2s0_8ch_p0_0>;
+ };
+ };
+ };
+
+ /* connected with MIPI-CSI1 */
+};
+
+&i2c8 {
+ pinctrl-0 = <&i2c8m2_xfer>;
+};
+
+&i2s0_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+
+ i2s0_8ch_p0: port {
+ i2s0_8ch_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&rt5616_p0_0>;
+ };
+ };
+};
+
+&pcie2x1l0 {
+ reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3_pcie20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_rst>;
+ status = "okay";
+};
+
+&pcie2x1l1 {
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_1_rst>;
+ status = "okay";
+};
+
+&pcie2x1l2 {
+ reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3_pcie20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_2_rst>;
+ status = "okay";
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x4 {
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie30>;
+ status = "okay";
+};
+
+&pinctrl {
+ gpio-leds {
+ sys_led_pin: sys-led-pin {
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usr_led_pin: usr-led-pin {
+ rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ ir-receiver {
+ ir_receiver_pin: ir-receiver-pin {
+ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie2_0_rst: pcie2-0-rst {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2_1_rst: pcie2-1-rst {
+ rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2_2_rst: pcie2-2-rst {
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_m2_0_pwren: pcie-m20-pwren {
+ rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_m2_1_pwren: pcie-m21-pwren {
+ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ typec5v_pwren: typec5v-pwren {
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usbc0_int: usbc0-int {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-0 = <&pwm1m1_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&avcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ no-mmc;
+ no-sdio;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd_s0>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+/* optional on non-LTS, populated on LTS version */
+&sfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim1_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&spi2 {
+ status = "okay";
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ num-cs = <1>;
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ spi-max-frequency = <1000000>;
+ reg = <0x0>;
+
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+ system-power-controller;
+
+ vcc1-supply = <&vcc4v0_sys>;
+ vcc2-supply = <&vcc4v0_sys>;
+ vcc3-supply = <&vcc4v0_sys>;
+ vcc4-supply = <&vcc4v0_sys>;
+ vcc5-supply = <&vcc4v0_sys>;
+ vcc6-supply = <&vcc4v0_sys>;
+ vcc7-supply = <&vcc4v0_sys>;
+ vcc8-supply = <&vcc4v0_sys>;
+ vcc9-supply = <&vcc4v0_sys>;
+ vcc10-supply = <&vcc4v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc4v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc4v0_sys>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_log_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_2v0_pldo_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "avcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "avdd_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "avdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy2_host {
+ status = "okay";
+};
+
+&u2phy3_host {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_typec_ss: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_ss>;
+ };
+
+ usbdp_phy0_typec_sbu: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usbc0_sbu>;
+ };
+ };
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "host";
+ status = "okay";
+ usb-role-switch;
+
+ port {
+ usb_host0_xhci_drd_sw: endpoint {
+ remote-endpoint = <&usbc0_hs>;
+ };
+ };
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
};
};
+ rfkill {
+ compatible = "rfkill-gpio";
+ label = "rfkill-pcie-wlan";
+ radio-type = "wlan";
+ shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ };
+
sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
compatible = "everest,es8388";
reg = <0x11>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
- clock-names = "mclk";
AVDD-supply = <&vcc_1v8_s0>;
DVDD-supply = <&vcc_1v8_s0>;
HPVDD-supply = <&vcc_3v3_s0>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
- clock-names = "mclk";
AVDD-supply = <&avcc_1v8_codec_s0>;
DVDD-supply = <&avcc_1v8_codec_s0>;
HPVDD-supply = <&vcc_3v3_s0>;
};
cooling-maps {
- map1 {
+ map0 {
trip = <&package_fan0>;
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
};
- map2 {
+ map1 {
trip = <&package_fan1>;
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
};
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
- regulator-init-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588s.dtsi"
+
+/ {
+ model = "Gameforce Ace";
+ chassis-type = "handset";
+ compatible = "gameforce,ace", "rockchip,rk3588s";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc_keys: adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <60>;
+
+ button-vol-up {
+ label = "VOLUMEUP";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <17000>;
+ };
+
+ button-vol-down {
+ label = "VOLUMEDOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <417000>;
+ };
+ };
+
+ /* Joystick range values based on hardware observation. */
+ adc_joystick: adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&saradc 2>, <&saradc 3>,
+ <&saradc 4>, <&saradc 5>;
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <40>;
+ abs-fuzz = <30>;
+ abs-range = <0 4095>;
+ linux,code = <ABS_RX>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <40>;
+ abs-fuzz = <30>;
+ abs-range = <0 4095>;
+ linux,code = <ABS_RY>;
+ };
+
+ axis@2 {
+ reg = <2>;
+ abs-flat = <40>;
+ abs-fuzz = <30>;
+ abs-range = <0 4095>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis@3 {
+ reg = <3>;
+ abs-flat = <40>;
+ abs-fuzz = <30>;
+ abs-range = <0 4095>;
+ linux,code = <ABS_X>;
+ };
+ };
+
+ /* Trigger range values based on hardware observation. */
+ adc_triggers: adc-trigger {
+ compatible = "adc-joystick";
+ io-channels = <&ti_adc 6>,
+ <&ti_adc 7>;
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <15>;
+ abs-fuzz = <15>;
+ abs-range = <890 1530>;
+ linux,code = <ABS_HAT2X>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <15>;
+ abs-fuzz = <15>;
+ abs-range = <1010 1550>;
+ linux,code = <ABS_HAT2Y>;
+ };
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-0 = <&hp_detect>;
+ pinctrl-names = "default";
+ simple-audio-card,aux-devs = <&_headphone>, <&_speaker>;
+ simple-audio-card,bitclock-master = <&masterdai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&masterdai>;
+ simple-audio-card,hp-det-gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "rockchip,es8388-codec";
+ simple-audio-card,pin-switches = "Headphones", "Speaker";
+ simple-audio-card,routing =
+ "Speaker Amplifier INL", "LOUT2",
+ "Speaker Amplifier INR", "ROUT2",
+ "Speaker", "Speaker Amplifier OUTL",
+ "Speaker", "Speaker Amplifier OUTR",
+ "Headphones Amplifier INL", "LOUT1",
+ "Headphones Amplifier INR", "ROUT1",
+ "Headphones", "Headphones Amplifier OUTL",
+ "Headphones", "Headphones Amplifier OUTR",
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
+
+ masterdai: simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&lcd_bl_en>;
+ pinctrl-names = "default";
+ pwms = <&pwm13 0 25000 PWM_POLARITY_INVERTED>;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3700000>;
+ constant-charge-current-max-microamp = <2500000>;
+ constant-charge-voltage-max-microvolt = <8750000>;
+ voltage-min-design-microvolt = <7400000>;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&btn_pins_ctrl>;
+ pinctrl-names = "default";
+
+ button-a {
+ gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+ label = "EAST";
+ linux,code = <BTN_EAST>;
+ };
+
+ button-b {
+ gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "SOUTH";
+ linux,code = <BTN_SOUTH>;
+ };
+
+ button-down {
+ gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
+ label = "DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>;
+ };
+
+ button-home {
+ gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "FUNCTION";
+ linux,code = <BTN_MODE>;
+ };
+
+ button-l1 {
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+ label = "L1";
+ linux,code = <BTN_TL>;
+ };
+
+ button-left {
+ gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
+ label = "DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>;
+ };
+
+ button-menu {
+ gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
+ label = "HOME";
+ linux,code = <KEY_HOME>;
+ };
+
+ button-r1 {
+ gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "R1";
+ linux,code = <BTN_TR>;
+ };
+
+ button-right {
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>;
+ };
+
+ button-select {
+ gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_LOW>;
+ label = "SELECT";
+ linux,code = <BTN_SELECT>;
+ };
+
+ button-start {
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ label = "START";
+ linux,code = <BTN_START>;
+ };
+
+ button-thumbl {
+ gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "THUMBL";
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+ label = "THUMBR";
+ linux,code = <BTN_THUMBR>;
+ };
+
+ button-up {
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "DPAD-UP";
+ linux,code = <BTN_DPAD_UP>;
+ };
+
+ button-x {
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "NORTH";
+ linux,code = <BTN_NORTH>;
+ };
+
+ button-y {
+ gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_LOW>;
+ label = "WEST";
+ linux,code = <BTN_WEST>;
+ };
+ };
+
+ gpio_leds: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ green_led: led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ red_led: led-1 {
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_CHARGING;
+ };
+ };
+
+ amp_headphone: headphone-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&headphone_amplifier_en>;
+ pinctrl-names = "default";
+ sound-name-prefix = "Headphones Amplifier";
+ };
+
+ pwm_fan: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-levels = <0 120 150 180 210 240 255>;
+ fan-supply = <&vcc5v0_sys>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PB2 IRQ_TYPE_EDGE_RISING>;
+ pulses-per-revolution = <4>;
+ pwms = <&pwm12 0 50000 PWM_POLARITY_INVERTED>;
+ };
+
+ pwm_gpio33: pwm-33 {
+ compatible = "pwm-gpio";
+ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vib_right_h>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ };
+
+ pwm_gpio132: pwm-132 {
+ compatible = "pwm-gpio";
+ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vib_left_h>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clock-names = "ext_clock";
+ clocks = <&rtc_hym8563>;
+ pinctrl-0 = <&wifi_enable_h>;
+ pinctrl-names = "default";
+ post-power-on-delay-ms = <200>;
+ power-off-delay-us = <5000000>;
+ reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+ };
+
+ amp_speaker: speaker-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&speaker_amplifier_en>;
+ pinctrl-names = "default";
+ sound-name-prefix = "Speaker Amplifier";
+ VCC-supply = <&vcc5v0_spk>;
+ };
+
+ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1100000>;
+ regulator-min-microvolt = <1100000>;
+ regulator-name = "vcc_1v1_nldo_s3";
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_lcd0_n: vcc3v3-lcd0-n-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vcc_lcd_h>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc3v3_lcd0_n";
+ vin-supply = <&vcc_3v3_s3>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&sd_s0_pwr>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc_3v3_sd_s0";
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc5v0_spk: vcc5v0-spk-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vcc5v0_spk_pwr>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "vcc5v0_spk";
+ vin-supply = <&vcc5v0_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "vcc5v0_sys";
+ };
+
+ vibrator_l: vibrator-l {
+ compatible = "pwm-vibrator";
+ pwm-names = "enable";
+ pwms = <&pwm_gpio132 0 20000000 0>;
+ };
+
+ vibrator_r: vibrator-r {
+ compatible = "pwm-vibrator";
+ pwm-names = "enable";
+ pwms = <&pwm_gpio33 0 20000000 0>;
+ };
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0m2_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <550000>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <550000>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-max-microvolt = <950000>;
+ regulator-min-microvolt = <550000>;
+ regulator-name = "vdd_npu_s0";
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ touchscreen@14 {
+ compatible = "goodix,gt911";
+ reg = <0x14>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+ irq-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&touch_int>, <&touch_rst>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+ touchscreen-inverted-x;
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ touchscreen-swapped-x-y;
+ };
+};
+
+&i2c4 {
+ pinctrl-0 = <&i2c4m2_xfer>;
+ status = "okay";
+
+ ti_adc: adc@48 {
+ compatible = "ti,ads1015";
+ reg = <0x48>;
+ #address-cells = <1>;
+ #io-channel-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ };
+
+ channel@7 {
+ reg = <7>;
+ };
+ };
+
+ imu@68 {
+ compatible = "invensense,mpu6880";
+ reg = <0x68>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&i2c6 {
+ pinctrl-0 = <&i2c6m3_xfer>;
+ status = "okay";
+
+ rtc_hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&hym8563_int>, <&clk32k_in>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+
+ /* Battery profile from BSP device tree. */
+ battery@62 {
+ compatible = "cellwise,cw2015";
+ reg = <0x62>;
+
+ cellwise,battery-profile = /bits/ 8
+ <0x18 0x0A 0x76 0x6A 0x6A 0x6A 0x68 0x66
+ 0x62 0x5E 0x5A 0x58 0x5F 0x59 0x46 0x3D
+ 0x35 0x2D 0x28 0x21 0x29 0x38 0x44 0x50
+ 0x1A 0x85 0x07 0xAE 0x14 0x28 0x48 0x56
+ 0x66 0x66 0x66 0x6A 0x3E 0x1A 0x6C 0x3D
+ 0x09 0x38 0x1A 0x49 0x7B 0x96 0xA2 0x15
+ 0x3B 0x77 0x9A 0xB1 0x80 0x87 0xB0 0xCB
+ 0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>;
+ cellwise,monitor-interval-ms = <5000>;
+ monitored-battery = <&battery>;
+ status = "okay";
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ es8388: audio-codec@11 {
+ compatible = "everest,es8388";
+ reg = <0x11>;
+ assigned-clock-rates = <12288000>;
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ AVDD-supply = <&vcc_3v3_s3>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ DVDD-supply = <&vcc_1v8_s3>;
+ HPVDD-supply = <&vcc_3v3_s3>;
+ PVDD-supply = <&vcc_1v8_s3>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+};
+
+&package_thermal {
+ polling-delay = <1000>;
+
+ trips {
+ package_fan0: package-fan0 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ package_fan1: package-fan1 {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&package_fan0>;
+ cooling-device = <&pwm_fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map2 {
+ trip = <&package_fan1>;
+ cooling-device = <&pwm_fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+/*
+ * Attempts to use an M.2 SATA in this slot worked intermittently
+ * with the correct nodes enabled in device-tree, but eventually
+ * resulted in a destroyed board. Advise caution.
+ */
+&pcie2x1l1 {
+ pinctrl-0 = <&pcie_rst>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pinctrl {
+ audio-amplifier {
+ headphone_amplifier_en: headphone-amplifier-en {
+ rockchip,pins =
+ <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ hp_detect: headphone-detect {
+ rockchip,pins =
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ speaker_amplifier_en: speaker-amplifier-en {
+ rockchip,pins =
+ <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins =
+ <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins =
+ <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins =
+ <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ charger {
+ boost_enable_h: boost-enable-h {
+ rockchip,pins =
+ <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ charger_int_h: charger-int-h {
+ rockchip,pins =
+ <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins =
+ <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gpio-btns {
+ btn_pins_ctrl: btn-pins-ctrl {
+ rockchip,pins =
+ <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gpio-leds {
+ led_pins: led-pins {
+ rockchip,pins =
+ <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ lcd_bl_en {
+ lcd_bl_en: lcd-bl-en {
+ rockchip,pins =
+ <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie-pins {
+ pcie_rst: pcie-rst {
+ rockchip,pins =
+ <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sd-pwr {
+ sd_s0_pwr: sd-s0-pwr {
+ rockchip,pins =
+ <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ spk-pwr {
+ vcc5v0_spk_pwr: vcc5v0-spk-pwr {
+ rockchip,pins =
+ <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ touch {
+ touch_int: touch-int {
+ rockchip,pins =
+ <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ touch_rst: touch-rst {
+ rockchip,pins =
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb-typec {
+ usbc0_int: usbc0-int {
+ rockchip,pins =
+ <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ vcc3v3-lcd {
+ vcc_lcd_h: vcc-lcd-h {
+ rockchip,pins =
+ <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ vibrator {
+ vib_left_h: vib-left-h {
+ rockchip,pins =
+ <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vib_right_h: vib-right-h {
+ rockchip,pins =
+ <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ wifi_host_wake_irq: wifi-host-wake-irq {
+ rockchip,pins =
+ <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm12 {
+ pinctrl-0 = <&pwm12m1_pins>;
+ status = "okay";
+};
+
+&pwm13 {
+ pinctrl-0 = <&pwm13m1_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&sdio {
+ #address-cells = <1>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ max-frequency = <150000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
+ sd-uhs-sdr104;
+ #size-cells = <0>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-0 = <&wifi_host_wake_irq>;
+ pinctrl-names = "default";
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ no-sdio;
+ no-mmc;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_sd_s0>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&spi2 {
+ #address-cells = <1>;
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>;
+ pinctrl-names = "default";
+ #size-cells = <0>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ pinctrl-names = "default";
+ spi-max-frequency = <1000000>;
+ system-power-controller;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <400>;
+ regulator-max-microvolt = <950000>;
+ regulator-min-microvolt = <550000>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <950000>;
+ regulator-min-microvolt = <550000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_logic_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <750000>;
+ regulator-min-microvolt = <675000>;
+ regulator-name = "vdd_logic_s0";
+ regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <950000>;
+ regulator-min-microvolt = <550000>;
+ regulator-name = "vdd_vdenc_s0";
+ regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_ddr_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2000000>;
+ regulator-min-microvolt = <2000000>;
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "avcc_1v8_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-name = "avdd_1v2_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vccio_sd_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3_pldo6: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3_pldo6";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <750000>;
+ regulator-min-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <850000>;
+ regulator-min-microvolt = <850000>;
+ regulator-name = "vdd_ddr_pll_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <837500>;
+ regulator-min-microvolt = <837500>;
+ regulator-name = "avdd_0v75_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&uart9 {
+ pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rtc_hym8563>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_l>;
+ pinctrl-names = "default";
+ shutdown-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+ };
+};
assigned-clock-rates = <12288000>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
AVDD-supply = <&vcc_3v3_s3>;
- clock-names = "mclk";
clocks = <&cru I2S0_8CH_MCLKOUT>;
DVDD-supply = <&vcc_1v8_s3>;
HPVDD-supply = <&vcc_3v3_s3>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588s.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-M2";
+ compatible = "hardkernel,odroid-m2", "rockchip,rk3588s";
+
+ aliases {
+ ethernet0 = &gmac1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_led>, <&sys_led>;
+
+ led_pwr: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led_sys: led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-levels = <0 192 224 255>;
+ fan-supply = <&vcc5v0_sys>;
+ pwms = <&pwm0 0 22222 0>;
+ };
+
+ vcc_1v1_nldo_s3: regulator-1v1-vcc-nldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc4v0_sys>;
+ };
+
+ vcc3v3_lcd: regulator-3v3-vcc-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwren>;
+ regulator-name = "vcc3v3_lcd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc3v3_pcie: regulator-3v3-vcc-pcie {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwren>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc_3v3_s0: regulator-3v3-vcc-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc4v0_sys: regulator-4v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc4v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <4800000>;
+ regulator-max-microvolt = <4800000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_pwren>;
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_host_pwren>;
+ regulator-name = "vcc5v0_usb2_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb3_host: regulator-5v0-vcc-usb3-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_host_pwren>;
+ regulator-name = "vcc5v0_usb3_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb3_typec: regulator-5v0-vcc-usb3-typec {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_typec_pwren>;
+ regulator-name = "vcc5v0_usb3_typec";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcca: regulator-5v0-vcca {
+ compatible = "regulator-fixed";
+ regulator-name = "vcca";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc12v_dcin: regulator-12v0-vcc-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3_s0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_miim
+ &gmac1_tx_bus2
+ &gmac1_rx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus
+ &gmac1_clkinout>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8m2_xfer>;
+ status = "okay";
+
+ usbc0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vcc5v0_usb3_typec>;
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc0_role_switch: endpoint {
+ remote-endpoint = <&usb_host0_xhci_role_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc0_orientation_switch: endpoint {
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usbc0_dp_altmode_mux: endpoint {
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcf8563_int>;
+ wakeup-source;
+ };
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <1>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&package_thermal {
+ polling-delay = <1000>;
+
+ trips {
+ package_fan0: package-fan0 {
+ hysteresis = <2000>;
+ temperature = <60000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ cooling-device = <&fan 1 THERMAL_NO_LIMIT>;
+ trip = <&package_fan0>;
+ };
+ };
+};
+
+&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20x1_pins>;
+ reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pinctrl {
+ lcd {
+ lcd_pwren: lcd-pwren {
+ rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ pwr_led: pwr-led {
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sys_led: sys-led {
+ rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie20x1_pins: pcie20x1-pins {
+ rockchip,pins =
+ <1 RK_PA0 4 &pcfg_pull_none>,
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PA1 4 &pcfg_pull_none>;
+ };
+
+ pcie_pwren: pcie-pwren {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ regulator {
+ vcc5v0_pwren: vcc5v0-pwren {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rtc {
+ pcf8563_int: pcf8563-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb2_host_pwren: usb2-host-pwren {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb3_host_pwren: usb3-host-pwren {
+ rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb3_typec_pwren: usb3-typec-pwren {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usbc0_int: usbc0-int {
+ rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0m2_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sd;
+ no-sdio;
+ non-removable;
+ vmmc-supply = <&vcc_3v3_s0>;
+ vqmmc-supply = <&vcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ no-mmc;
+ no-sdio;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&spi2 {
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0>, <&spi2m2_pins>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ spi-max-frequency = <1000000>;
+ system-power-controller;
+
+ vcc1-supply = <&vcc4v0_sys>;
+ vcc2-supply = <&vcc4v0_sys>;
+ vcc3-supply = <&vcc4v0_sys>;
+ vcc4-supply = <&vcc4v0_sys>;
+ vcc5-supply = <&vcc4v0_sys>;
+ vcc6-supply = <&vcc4v0_sys>;
+ vcc7-supply = <&vcc4v0_sys>;
+ vcc8-supply = <&vcc4v0_sys>;
+ vcc9-supply = <&vcc4v0_sys>;
+ vcc10-supply = <&vcc4v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc4v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcca>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: dcdc-reg1 {
+ regulator-name = "vdd_gpu_s0";
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: dcdc-reg2 {
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_logic_s0: dcdc-reg3 {
+ regulator-name = "vdd_logic_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: dcdc-reg4 {
+ regulator-name = "vdd_vdenc_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-name = "vdd_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-name = "vdd2_ddr_s3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-name = "vcc_3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-name = "vddq_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-name = "vcc_1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg1 {
+ regulator-name = "vcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_1v8_s0: pldo-reg2 {
+ regulator-name = "vcca_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdda_1v2_s0: pldo-reg3 {
+ regulator-name = "vdda_1v2_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_3v3_s0: pldo-reg4 {
+ regulator-name = "vcca_3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-name = "vccio_sd_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3_pldo6: pldo-reg6 {
+ regulator-name = "vcc_1v8_s3_pldo6";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-name = "vdd_0v75_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdda_ddr_pll_s0: nldo-reg2 {
+ regulator-name = "vdda_ddr_pll_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdda_0v75_s0: nldo-reg3 {
+ regulator-name = "vdda_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <837500>;
+ regulator-max-microvolt = <837500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v85_s0: nldo-reg4 {
+ regulator-name = "vdda_0v85_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ /* Schematics show not in use */
+ nldo-reg5 {
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_usb2_host>;
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_usb3_host>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ usb_host0_xhci_role_switch: endpoint {
+ remote-endpoint = <&usbc0_role_switch>;
+ };
+ };
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host2_xhci {
+ status = "okay";
+};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orientation_switch>;
+ };
+
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usbc0_dp_altmode_mux>;
+ };
+ };
+};
regulator-max-microvolt = <12000000>;
};
+ vcc3v3_wf: vcc3v3-wf-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_wf";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pow_en>;
+ pinctrl-names = "default";
+ vin-supply = <&vcc5v0_sys>;
+ };
+
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_host";
};
};
+&combphy0_ps {
+ status = "okay";
+};
+
&combphy2_psu {
status = "okay";
};
};
};
+&pcie2x1l2 {
+ pinctrl-0 = <&pcie20x1m0_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_wf>;
+ status = "okay";
+};
+
&pinctrl {
leds {
io_led: io-led {
};
};
+ pcie {
+ pow_en: pow-en {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
power {
vcc_5v0_en: vcc-5v0-en {
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
-
- wifibt {
- wl_reset: wl-reset {
- rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- wl_dis: wl-dis {
- rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_output_high>;
- };
-
- wl_wake_host: wl-wake-host {
- rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- bt_dis: bt-dis {
- rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_output_high>;
- };
-
- bt_wake_host: bt-wake-host {
- rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
};
&pwm3 {
&usb_host0_ehci {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&wl_reset &wl_dis &wl_wake_host &bt_dis &bt_wake_host>;
};
&usb_host0_ohci {
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Spreadtrum SC2731 PMIC dts file
*
* Copyright (C) 2018, Spreadtrum Communications Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
&adi_bus {
nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
};
- fgu@a00 {
+ fuel-gauge@a00 {
compatible = "sprd,sc2731-fgu";
reg = <0xa00>;
bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Spreadtrum SC9836 openphone board DTS file
*
* Copyright (C) 2014, Spreadtrum Communications Inc.
- *
- * This file is licensed under a dual GPLv2 or X11 license.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Spreadtrum SC9836 SoC DTS file
*
* Copyright (C) 2014, Spreadtrum Communications Inc.
- *
- * This file is licensed under a dual GPLv2 or X11 license.
*/
#include "sharkl64.dtsi"
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Spreadtrum SC9860 SoC
*
* Copyright (C) 2016, Spreadtrum Communications Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#size-cells = <2>;
ranges;
- sdio0: sdio@20300000 {
+ sdio0: mmc@20300000 {
compatible = "sprd,sdhci-r11";
reg = <0 0x20300000 0 0x1000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sdio", "enable";
clocks = <&aon_clk CLK_SDIO0_2X>,
<&apahb_gate CLK_SDIO0_EB>;
+ clock-names = "sdio", "enable";
assigned-clocks = <&aon_clk CLK_SDIO0_2X>;
assigned-clock-parents = <&rpll CLK_RPLL_390M>;
no-mmc;
};
- sdio3: sdio@20600000 {
+ sdio3: mmc@20600000 {
compatible = "sprd,sdhci-r11";
reg = <0 0x20600000 0 0x1000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sdio", "enable";
clocks = <&aon_clk CLK_EMMC_2X>,
<&apahb_gate CLK_EMMC_EB>;
+ clock-names = "sdio", "enable";
assigned-clocks = <&aon_clk CLK_EMMC_2X>;
assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Spreadtrum Sharkl64 platform DTS file
*
* Copyright (C) 2014, Spreadtrum Communications Inc.
- *
- * This file is licensed under a dual GPLv2 or X11 license.
*/
/ {
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Spreadtrum SP9860g board
*
* Copyright (C) 2017, Spreadtrum Communications Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
compatible = "sprd,sdhci-r11";
reg = <0x1100000 0x1000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sdio", "enable";
clocks = <&ap_clk CLK_SDIO0_2X>,
<&apapb_gate CLK_SDIO0_EB>;
+ clock-names = "sdio", "enable";
assigned-clocks = <&ap_clk CLK_SDIO0_2X>;
assigned-clock-parents = <&pll1 CLK_RPLL>;
status = "disabled";
compatible = "sprd,sdhci-r11";
reg = <0x1400000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sdio", "enable";
clocks = <&ap_clk CLK_EMMC_2X>,
<&apapb_gate CLK_EMMC_EB>;
+ clock-names = "sdio", "enable";
assigned-clocks = <&ap_clk CLK_EMMC_2X>;
assigned-clock-parents = <&pll1 CLK_RPLL>;
status = "disabled";
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Spreadtrum Whale2 platform peripherals
*
* Copyright (C) 2016, Spreadtrum Communications Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#include <dt-bindings/clock/sprd,sc9860-clk.h>
"sprd,sc9836-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART0_EB>,
- <&ap_clk CLK_UART0>, <&ext_26m>;
+ <&ap_clk CLK_UART0>,
+ <&ext_26m>;
+ clock-names = "enable", "uart", "source";
status = "disabled";
};
"sprd,sc9836-uart";
reg = <0x100000 0x100>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART1_EB>,
- <&ap_clk CLK_UART1>, <&ext_26m>;
+ <&ap_clk CLK_UART1>,
+ <&ext_26m>;
+ clock-names = "enable", "uart", "source";
status = "disabled";
};
"sprd,sc9836-uart";
reg = <0x200000 0x100>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART2_EB>,
- <&ap_clk CLK_UART2>, <&ext_26m>;
+ <&ap_clk CLK_UART2>,
+ <&ext_26m>;
+ clock-names = "enable", "uart", "source";
status = "disabled";
};
"sprd,sc9836-uart";
reg = <0x300000 0x100>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART3_EB>,
- <&ap_clk CLK_UART3>, <&ext_26m>;
+ <&ap_clk CLK_UART3>,
+ <&ext_26m>;
+ clock-names = "enable", "uart", "source";
status = "disabled";
};
};
/* For backwards compatibility: */
#dma-channels = <32>;
dma-channels = <32>;
- clock-names = "enable";
clocks = <&apahb_gate CLK_DMA_EB>;
+ clock-names = "enable";
};
- sdio3: sdio@50430000 {
+ sdio3: mmc@50430000 {
compatible = "sprd,sdhci-r11";
reg = <0 0x50430000 0 0x1000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sdio", "enable", "2x_enable";
clocks = <&aon_prediv CLK_EMMC_2X>,
- <&apahb_gate CLK_EMMC_EB>,
- <&aon_gate CLK_EMMC_2X_EN>;
+ <&apahb_gate CLK_EMMC_EB>,
+ <&aon_gate CLK_EMMC_2X_EN>;
+ clock-names = "sdio", "enable", "2x_enable";
assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
assigned-clock-parents = <&clk_l0_409m6>;
compatible = "sprd,hwspinlock-r3p0";
reg = <0 0x40500000 0 0x1000>;
#hwlock-cells = <1>;
- clock-names = "enable";
clocks = <&aon_gate CLK_SPLK_EB>;
+ clock-names = "enable";
};
eic_debounce: gpio@40210000 {
reg = <0 0x40310000 0 0x1000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
timeout-sec = <12>;
- clock-names = "enable", "rtc_enable";
clocks = <&aon_gate CLK_APCPU_WDG_EB>,
- <&aon_gate CLK_AP_WDG_RTC_EB>;
+ <&aon_gate CLK_AP_WDG_RTC_EB>;
+ clock-names = "enable", "rtc_enable";
};
};
/* For backwards compatibility: */
#dma-channels = <32>;
dma-channels = <32>;
- clock-names = "enable", "ashb_eb";
clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
- <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+ <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+ clock-names = "enable", "ashb_eb";
};
};
};
bootph-pre-ram;
compatible = "ti,j721e-esm";
reg = <0x00 0x420000 0x00 0x1000>;
+ /* Interrupt sources: rti0, rti1, rti15, wrti0, rti2, rti3 */
ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
};
bootph-pre-ram;
compatible = "ti,j721e-esm";
reg = <0x00 0x4100000 0x00 0x1000>;
+ /* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0 */
ti,esm-pins = <0>, <1>, <2>, <85>;
};
thermal-sensors = <&wkup_vtm0 0>;
trips {
+ main0_alert: main0-alert {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
main0_crit: main0-crit {
temperature = <105000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&main0_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
main1_thermal: main1-thermal {
thermal-sensors = <&wkup_vtm0 1>;
trips {
+ main1_alert: main1-alert {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
main1_crit: main1-crit {
temperature = <105000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&main1_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
};
mcu {
compatible = "ti,cc1352p7";
- reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
+ bootloader-backdoor-gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&main_gpio0 14 GPIO_ACTIVE_HIGH>;
vdds-supply = <&vdd_3v3>;
};
};
next-level-cache = <&L2_0>;
operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 135 0>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
next-level-cache = <&L2_0>;
operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 136 0>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
next-level-cache = <&L2_0>;
operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 137 0>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
next-level-cache = <&L2_0>;
operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 138 0>;
+ #cooling-cells = <2>;
};
};
pinctrl-single,function-mask = <0xffffffff>;
};
+ main_esm: esm@420000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x0 0x420000 0x0 0x1000>;
+ bootph-pre-ram;
+ /* Interrupt sources: rti0, rti1, wrti0, rti4, rti2, rti3 */
+ ti,esm-pins = <192>, <193>, <195>, <204>, <209>, <210>;
+ };
+
main_timer0: timer@2400000 {
compatible = "ti,am654-timer";
reg = <0x00 0x2400000 0x00 0x400>;
clocks = <&k3_clks 204 2>;
power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
};
+
+ e5010: jpeg-encoder@fd20000 {
+ compatible = "ti,am62a-jpeg-enc", "img,e5010-jpeg-enc";
+ reg = <0x00 0xfd20000 0x00 0x100>,
+ <0x00 0xfd20200 0x00 0x200>;
+ reg-names = "core", "mmu";
+ clocks = <&k3_clks 201 0>;
+ power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
status = "disabled";
};
+ mcu_esm: esm@4100000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x0 0x4100000 0x0 0x1000>;
+ bootph-pre-ram;
+ /* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0 */
+ ti,esm-pins = <0>, <1>, <2>, <85>;
+ };
+
/*
* The MCU domain timer interrupts are routed only to the ESM module,
* and not currently available for Linux. The MCU domain timers are
<0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
<0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
<0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
+ <0x00 0x0fd20000 0x00 0x0fd20000 0x00 0x00000100>, /* JPEGENC0_CORE */
+ <0x00 0x0fd20200 0x00 0x0fd20200 0x00 0x00000200>, /* JPEGENC0_CORE_MMU */
<0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
<0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
<0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
main_esm: esm@420000 {
compatible = "ti,j721e-esm";
reg = <0x00 0x420000 0x00 0x1000>;
- ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
bootph-pre-ram;
+ /* Interrupt sources: rti0, rti1, wrti0 rti2, rti3, rti15 */
+ ti,esm-pins = <224>, <225>, <227>, <241>, <242>, <248>;
};
main_timer0: timer@2400000 {
mcu_esm: esm@4100000 {
compatible = "ti,j721e-esm";
reg = <0x00 0x4100000 0x00 0x1000>;
- ti,esm-pins = <0>, <1>, <2>, <85>;
- status = "reserved";
bootph-pre-ram;
+ /* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0, wrti0 */
+ ti,esm-pins = <0>, <1>, <2>, <85>, <86>;
};
/*
&main_gpio1 {
gpio-ranges = <&main_pmx0 0 94 32>, <&main_pmx0 42 137 5>,
<&main_pmx0 47 143 3>, <&main_pmx0 50 149 2>;
+ gpio-reserved-ranges = <32 10>;
ti,ngpio = <52>;
};
wkup_uart0_pins_default: wkup-uart0-default-pins {
pinctrl-single,pins = <
- AM62PX_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */
- AM62PX_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */
AM62PX_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */
AM62PX_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */
>;
bootph-pre-ram;
compatible = "ti,j721e-esm";
reg = <0x00 0x420000 0x00 0x1000>;
- ti,esm-pins = <160>, <161>;
+ /* Interrupt sources: rti0, rti1, rti8, rti9, rti10, rti11 */
+ ti,esm-pins = <160>, <161>, <162>, <163>, <164>, <165>;
};
main_uart0: serial@2800000 {
assigned-clock-parents = <&k3_clks 13 9>;
clock-names = "fck";
power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
dmas = <&main_pktdma 0xC500 15>,
<&main_pktdma 0xC501 15>,
phys = <&phy_gmii_sel 1>;
mac-address = [00 00 00 00 00 00];
ti,syscon-efuse = <&main_conf 0x200>;
+ status = "disabled";
};
cpsw_port2: port@2 {
label = "port2";
phys = <&phy_gmii_sel 2>;
mac-address = [00 00 00 00 00 00];
+ status = "disabled";
};
};
};
usbss0: cdns-usb@f900000 {
- compatible = "ti,am64-usb";
+ compatible = "ti,am64-usb", "ti,j721e-usb";
reg = <0x00 0xf900000 0x00 0x100>;
power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 161 9>, <&k3_clks 161 1>;
bootph-pre-ram;
compatible = "ti,j721e-esm";
reg = <0x00 0x4100000 0x00 0x1000>;
- ti,esm-pins = <0>, <1>;
+ /* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0 */
+ ti,esm-pins = <0>, <1>, <2>, <85>;
};
};
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&cpsw_rgmii1_pins_default>;
+ status = "okay";
};
&cpsw3g_mdio {
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy1>;
-};
-
-&cpsw_port2 {
- status = "disabled";
+ status = "okay";
};
&mailbox0_cluster2 {
#include "k3-pinctrl.h"
&main_pmx0 {
- gpmc0_pins_default: gpmc0-pins-default {
+ gpmc0_default_pins: gpmc0-default-pins {
bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */
};
&main_gpio0 {
- gpio0-36 {
+ gpmc0-hog {
bootph-all;
gpio-hog;
gpios = <36 0>;
&gpmc0 {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&gpmc0_pins_default>;
+ pinctrl-0 = <&gpmc0_default_pins>;
#address-cells = <2>;
#size-cells = <1>;
bootph-all;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
+ status = "okay";
};
&cpsw_port1 {
bootph-all;
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
+ status = "okay";
};
&cpsw_port2 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy3>;
+ status = "okay";
};
&cpsw3g_mdio {
&tscadc0 {
/* ADC is reserved for R5 usage */
status = "reserved";
+
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
};
&ospi0 {
model = "PHYTEC phyBOARD-Electra-AM64x RDK";
aliases {
+ ethernet1 = &icssg0_emac0;
+ ethernet2 = &icssg0_emac1;
mmc1 = &sdhci1;
serial2 = &main_uart0;
serial3 = &main_uart1;
standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
};
+ /* Dual Ethernet application node on PRU-ICSSG0 */
+ ethernet {
+ compatible = "ti,am642-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_rgmii1_pins_default>, <&icssg0_rgmii2_pins_default>;
+
+ interrupt-parent = <&icssg0_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ sram = <&oc_sram>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ dmas = <&main_pktdma 0xc100 15>, /* egress slice 0 */
+ <&main_pktdma 0xc101 15>, /* egress slice 0 */
+ <&main_pktdma 0xc102 15>, /* egress slice 0 */
+ <&main_pktdma 0xc103 15>, /* egress slice 0 */
+ <&main_pktdma 0xc104 15>, /* egress slice 1 */
+ <&main_pktdma 0xc105 15>, /* egress slice 1 */
+ <&main_pktdma 0xc106 15>, /* egress slice 1 */
+ <&main_pktdma 0xc107 15>, /* egress slice 1 */
+ <&main_pktdma 0x4100 15>, /* ingress slice 0 */
+ <&main_pktdma 0x4101 15>; /* ingress slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+
+ ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg0_mii_g_rt>;
+ ti,mii-rt = <&icssg0_mii_rt>;
+ ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg0_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg0_phy1>;
+ phy-mode = "rgmii-id";
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ ti,syscon-rgmii-delay = <&main_conf 0x4100>;
+ };
+
+ icssg0_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg0_phy2>;
+ phy-mode = "rgmii-id";
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ ti,syscon-rgmii-delay = <&main_conf 0x4104>;
+ };
+ };
+ };
+
keys {
compatible = "gpio-keys";
autorepeat;
>;
};
+ clkout0_pins_default: clkout0-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0274, PIN_OUTPUT, 5) /* (A19) EXT_REFCLK1.CLKOUT0 */
+ >;
+ };
+
gpio_keys_pins_default: gpio-keys-default-pins {
pinctrl-single,pins = <
AM64X_IOPAD(0x0044, PIN_INPUT, 7) /* (T18) GPMC0_AD2.GPIO0_17 */
>;
};
+ icssg0_mdio_pins_default: icssg0-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0200, PIN_INPUT, 0) /* (P2) PRG0_MDIO0_MDIO */
+ AM64X_IOPAD(0x0204, PIN_OUTPUT, 0) /* (P3) PRG0_MDIO0_MDC */
+ AM64X_IOPAD(0x01A8, PIN_OUTPUT, 7) /* (V1) PRG0_PRU0_GPO18.GPIO1_18 */
+ AM64X_IOPAD(0x01AC, PIN_OUTPUT, 7) /* (W1) PRG0_PRU0_GPO19.GPIO1_19 */
+ >;
+ };
+
+ icssg0_rgmii1_pins_default: icssg0-rgmii1-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0160, PIN_INPUT, 2) /* (Y1) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+ AM64X_IOPAD(0x0164, PIN_INPUT, 2) /* (R4) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+ AM64X_IOPAD(0x0168, PIN_INPUT, 2) /* (U2) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+ AM64X_IOPAD(0x016c, PIN_INPUT, 2) /* (V2) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+ AM64X_IOPAD(0x0170, PIN_INPUT, 2) /* (AA2) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+ AM64X_IOPAD(0x0178, PIN_INPUT, 2) /* (T3) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+ AM64X_IOPAD(0x018c, PIN_OUTPUT, 2) /* (Y3) PRG0_PRU0_GPO11.PRG0_RGMII1_TD0 */
+ AM64X_IOPAD(0x0190, PIN_OUTPUT, 2) /* (AA3) PRG0_PRU0_GPO12.PRG0_RGMII1_TD1 */
+ AM64X_IOPAD(0x0194, PIN_OUTPUT, 2) /* (R6) PRG0_PRU0_GPO13.PRG0_RGMII1_TD2 */
+ AM64X_IOPAD(0x0198, PIN_OUTPUT, 2) /* (V4) PRG0_PRU0_GPO14.PRG0_RGMII1_TD3 */
+ AM64X_IOPAD(0x019c, PIN_OUTPUT, 2) /* (T5) PRG0_PRU0_GPO15.PRG0_RGMII1_TX_CTL */
+ AM64X_IOPAD(0x01a0, PIN_OUTPUT, 2) /* (U4) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+ >;
+ };
+
+ icssg0_rgmii2_pins_default: icssg0-rgmii2-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x01b0, PIN_INPUT, 2) /* (Y2) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+ AM64X_IOPAD(0x01b4, PIN_INPUT, 2) /* (W2) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+ AM64X_IOPAD(0x01b8, PIN_INPUT, 2) /* (V3) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+ AM64X_IOPAD(0x01bc, PIN_INPUT, 2) /* (T4) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+ AM64X_IOPAD(0x01c0, PIN_INPUT, 2) /* (W3) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+ AM64X_IOPAD(0x01c8, PIN_INPUT, 2) /* (R5) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+ AM64X_IOPAD(0x01dc, PIN_OUTPUT, 2) /* (W4) PRG0_PRU1_GPO11.PRG0_RGMII2_TD0 */
+ AM64X_IOPAD(0x01e0, PIN_OUTPUT, 2) /* (Y4) PRG0_PRU1_GPO12.PRG0_RGMII2_TD1 */
+ AM64X_IOPAD(0x01e4, PIN_OUTPUT, 2) /* (T6) PRG0_PRU1_GPO13.PRG0_RGMII2_TD2 */
+ AM64X_IOPAD(0x01e8, PIN_OUTPUT, 2) /* (U6) PRG0_PRU1_GPO14.PRG0_RGMII2_TD3 */
+ AM64X_IOPAD(0x01ec, PIN_OUTPUT, 2) /* (U5) PRG0_PRU1_GPO15.PRG0_RGMII2_TX_CTL */
+ AM64X_IOPAD(0x01f0, PIN_OUTPUT, 2) /* (AA4) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+ >;
+ };
+
main_i2c1_pins_default: main-i2c1-default-pins {
pinctrl-single,pins = <
AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* (C18) I2C1_SCL */
};
};
+&icssg0_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_mdio_pins_default &clkout0_pins_default>;
+ status = "okay";
+
+ icssg0_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ reset-gpios = <&main_gpio1 18 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ };
+
+ icssg0_phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
+ reg = <0x2>;
+ tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ reset-gpios = <&main_gpio1 19 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ };
+};
+
&main_i2c1 {
status = "okay";
pinctrl-names = "default";
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
+ status = "okay";
};
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
+ status = "okay";
};
&cpsw_port2 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy1>;
+ status = "okay";
};
&cpsw3g_mdio {
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_default_pins>;
+ status = "okay";
};
&cpsw3g_mdio {
&cpsw_port1 {
phy-mode = "rgmii-id";
phy-handle = <ðernet_phy0>;
-};
-
-&cpsw_port2 {
- status = "disabled";
+ status = "okay";
};
&icssg1_mdio {
aliases {
ethernet0 = &cpsw_port1;
+ ethernet1 = &icssg1_emac0;
+ ethernet2 = &icssg1_emac1;
i2c1 = &mcu_i2c0;
mmc1 = &sdhci1;
serial0 = &mcu_uart0;
};
};
+ icssg1_eth: icssg1-eth {
+ compatible = "ti,am642-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pru_icssg1_rgmii1_pins>, <&pru_icssg1_rgmii2_pins>;
+ interrupt-parent = <&icssg1_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+ dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */
+ <&main_pktdma 0xc201 15>, /* egress slice 0 */
+ <&main_pktdma 0xc202 15>, /* egress slice 0 */
+ <&main_pktdma 0xc203 15>, /* egress slice 0 */
+ <&main_pktdma 0xc204 15>, /* egress slice 1 */
+ <&main_pktdma 0xc205 15>, /* egress slice 1 */
+ <&main_pktdma 0xc206 15>, /* egress slice 1 */
+ <&main_pktdma 0xc207 15>, /* egress slice 1 */
+ <&main_pktdma 0x4200 15>, /* ingress slice 0 */
+ <&main_pktdma 0x4201 15>; /* ingress slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+ sram = <&oc_sram>;
+ firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-txpru1-prueth-fw.elf";
+ ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+ ti,mii-g-rt = <&icssg1_mii_g_rt>;
+ ti,mii-rt = <&icssg1_mii_rt>;
+ ti,iep = <&icssg1_iep0>, <&icssg1_iep1>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg1_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg1_phy0c>;
+ phy-mode = "rgmii-id";
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ icssg1_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg1_phy03>;
+ phy-mode = "rgmii-id";
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+
fan0: pwm-fan {
compatible = "pwm-fan";
pinctrl-names = "default";
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&cpsw_pins>;
+ status = "okay";
};
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
-};
-
-&cpsw_port2 {
- status = "disabled";
+ status = "okay";
};
&cpsw3g_mdio {
status = "okay";
};
+&icssg1_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pru_icssg1_mdio_pins>;
+ status = "okay";
+
+ /* phy-mode is fixed up to rgmii-rxid by prueth driver to account for
+ * the SoC integration, so the only rx-internal-delay and no
+ * tx-internal-delay is set for the PHYs.
+ */
+
+ icssg1_phy03: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x3>;
+ reset-gpios = <&main_gpio1 47 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ icssg1_phy0c: ethernet-phy@c {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0xc>;
+ reset-gpios = <&main_gpio1 51 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+};
+
+
&main_gpio0 {
pinctrl-names = "default";
pinctrl-0 = <&main_gpio0_digital_pins>,
* Common bits of the IOT2050 Basic and Advanced variants, PG2
*/
-&mcu_r5fss0 {
- /* lock-step mode not supported on PG2 boards */
- ti,cluster-mode = <0>;
-};
-
&main_pmx0 {
cp2102n_reset_pin_default: cp2102n-reset-default-pins {
pinctrl-single,pins = <
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_SPEED_LAN;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_SPEED_LAN;
+ };
+ };
};
icssg0_eth1_phy: ethernet-phy@1 {
reg = <1>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_SPEED_LAN;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_SPEED_LAN;
+ };
+ };
};
};
+
+&mcu_r5fss0 {
+ /* lock-step mode not supported on iot2050 boards */
+ ti,cluster-mode = <0>;
+};
};
};
+ main_esm: esm@700000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x00 0x700000 0x00 0x1000>;
+ bootph-pre-ram;
+ /* Interrupt sources: rti0, rti1, rti2, rti3 */
+ ti,esm-pins = <224>, <225>, <226>, <227>;
+ };
+
serdes0: serdes@900000 {
compatible = "ti,phy-am654-serdes";
reg = <0x0 0x900000 0x0 0x2000>;
ranges = <0x0 0x0 0x00100000 0x1c000>;
serdes0_clk: clock@4080 {
- compatible = "ti,am654-serdes-ctrl", "syscon";
+ compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd";
reg = <0x4080 0x4>;
serdes0_mux: mux-controller {
};
serdes1_clk: clock@4090 {
- compatible = "ti,am654-serdes-ctrl", "syscon";
+ compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd";
reg = <0x4090 0x4>;
serdes1_mux: mux-controller {
ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
<0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
<0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
- <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */
- <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
+ <0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>, /* FSS data region 1 */
+ <0x4 0x00000000 0x4 0x00000000 0x4 0x00000000>; /* FSS data region 0/3 */
ospi0: spi@47040000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x0 0x47040000 0x0 0x100>,
- <0x5 0x00000000 0x1 0x0000000>;
+ <0x5 0x00000000 0x1 0x00000000>;
interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
ospi1: spi@47050000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x0 0x47050000 0x0 0x100>,
- <0x7 0x00000000 0x1 0x00000000>;
+ <0x7 0x00000000 0x1 0x00000000>;
interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
};
};
+ mcu_esm: esm@40800000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x00 0x40800000 0x00 0x1000>;
+ bootph-pre-ram;
+ /* Interrupt sources: mrti0, mrti1 */
+ ti,esm-pins = <104>, <105>;
+ };
+
mcu_rti1: watchdog@40610000 {
compatible = "ti,j7-rti-wdt";
reg = <0x0 0x40610000 0x0 0x100>;
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
- <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
<0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
- <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
- <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
- <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
+ <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>,
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>;
cbass_mcu: bus@28380000 {
compatible = "simple-bus";
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
- <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */
- <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
- <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */
cbass_wakeup: bus@42040000 {
compatible = "simple-bus";
compatible = "siemens,iot2050-basic", "ti,am654";
model = "SIMATIC IOT2050 Basic";
};
-
-&mcu_r5fss0 {
- /* lock-step mode not supported on this board */
- ti,cluster-mode = <0>;
-};
/dts-v1/;
/plugin/;
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
#include "k3-pinctrl.h"
<&main_udmap 0xc107>, /* egress slice 1 */
<&main_udmap 0x4100>, /* ingress slice 0 */
- <&main_udmap 0x4101>, /* ingress slice 1 */
- <&main_udmap 0x4102>, /* mgmnt rsp slice 0 */
- <&main_udmap 0x4103>; /* mgmnt rsp slice 1 */
+ <&main_udmap 0x4101>; /* ingress slice 1 */
dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
"tx1-0", "tx1-1", "tx1-2", "tx1-3",
"rx0", "rx1";
<&main_udmap 0xc207>, /* egress slice 1 */
<&main_udmap 0x4200>, /* ingress slice 0 */
- <&main_udmap 0x4201>, /* ingress slice 1 */
- <&main_udmap 0x4202>, /* mgmnt rsp slice 0 */
- <&main_udmap 0x4203>; /* mgmnt rsp slice 1 */
+ <&main_udmap 0x4201>; /* ingress slice 1 */
dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
"tx1-0", "tx1-1", "tx1-2", "tx1-3",
"rx0", "rx1";
};
};
};
+
+ transceiver1: can-phy0 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcan0_gpio_pins_default>;
+ standby-gpios = <&main_gpio1 47 GPIO_ACTIVE_LOW>;
+ };
+
+ transceiver2: can-phy1 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcan1_gpio_pins_default>;
+ standby-gpios = <&main_gpio1 67 GPIO_ACTIVE_LOW>;
+ };
};
&main_pmx0 {
AM65X_IOPAD(0x012c, PIN_INPUT, 2) /* (AG26) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */
>;
};
+
+ mcan0_gpio_pins_default: mcan0-gpio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x023c, PIN_INPUT, 7) /* (V25) PRG0_PRU0_GPIO18:GPIO1_47 */
+ >;
+ };
+
+ mcan1_gpio_pins_default: mcan1-gpio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x028c, PIN_INPUT, 7) /* (Y26) PRG0_PRU1_GPIO18.GPIO1_67 */
+ >;
+ };
+};
+
+&wkup_pmx0 {
+ mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x00ac, PIN_INPUT_PULLUP, 0) /* (W2) MCU_MCAN0_RX */
+ AM65X_WKUP_IOPAD(0x00a8, PIN_OUTPUT_PULLUP, 0) /* (W1) MCU_MCAN0_TX */
+ >;
+ };
+
+ mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x00c4, PIN_INPUT_PULLUP, 1) /* (AD3) WKUP_GPIO0_5.MCU_MCAN1_RX */
+ AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT_PULLUP, 1) /* (AC3) WKUP_GPIO0_4.MCU_MCAN1_TX */
+ >;
+ };
};
&icssg0_mdio {
pinctrl-names = "default";
pinctrl-0 = <&icssg1_iep0_pins_default>;
};
+
+&m_can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_pins_default>;
+ phys = <&transceiver1>;
+ status = "okay";
+};
+
+&m_can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan1_pins_default>;
+ phys = <&transceiver2>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IOT2050 M.2 variant, overlay for B-key PCIE0_LANE0 + E-key PCIE1_LANE0
+ * Copyright (c) Siemens AG, 2022-2024
+ *
+ * Authors:
+ * Chao Zeng <chao.zeng@siemens.com>
+ * Jan Kiszka <jan.kiszka@siemens.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&pcie0_rc {
+ num-lanes = <1>;
+ phys = <&serdes0 PHY_TYPE_PCIE 1>;
+ phy-names = "pcie-phy0";
+ reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pcie1_rc {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IOT2050 M.2 variant, overlay for B-key USB3.0 + E-key PCIE1_LANE0
+ * Copyright (c) Siemens AG, 2022-2024
+ *
+ * Authors:
+ * Chao Zeng <chao.zeng@siemens.com>
+ * Jan Kiszka <jan.kiszka@siemens.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&serdes0 {
+ assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>;
+};
+
+&pcie0_rc {
+ status = "disabled";
+};
+
+&pcie1_rc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&minipcie_pins_default>;
+
+ num-lanes = <1>;
+ phys = <&serdes1 PHY_TYPE_PCIE 0>;
+ phy-names = "pcie-phy0";
+ reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&dwc3_0 {
+ assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+ <&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */
+ phys = <&serdes0 PHY_TYPE_USB3 0>;
+ phy-names = "usb3-phy";
+};
+
+&usb0 {
+ maximum-speed = "super-speed";
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * https://beagley-ai.org/
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-j722s.dtsi"
+
+/ {
+ compatible = "beagle,am67a-beagley-ai", "ti,j722s";
+ model = "BeagleBoard.org BeagleY-AI";
+
+ aliases {
+ serial0 = &wkup_uart0;
+ serial2 = &main_uart0;
+ mmc1 = &sdhci1;
+ rtc0 = &rtc;
+ };
+
+ chosen {
+ stdout-path = &main_uart0;
+ };
+
+ memory@80000000 {
+ /* 4G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+ <0x00000008 0x80000000 0x00000000 0x80000000>;
+ device_type = "memory";
+ bootph-pre-ram;
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure_tfa_ddr: tfa@9e780000 {
+ reg = <0x00 0x9e780000 0x00 0x80000>;
+ no-map;
+ };
+
+ secure_ddr: optee@9e800000 {
+ reg = <0x00 0x9e800000 0x00 0x01800000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0100000 0x00 0xf00000>;
+ no-map;
+ };
+ };
+
+ vsys_5v0: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ bootph-all;
+ };
+
+ vdd_3v3: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_5v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_mmc1: regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_mmc1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_3v3_sd_pins_default>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>;
+ bootph-all;
+ };
+
+ vdd_sd_dv: regulator-4 {
+ compatible = "regulator-gpio";
+ regulator-name = "tlv71033";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_sd_dv_pins_default>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ vin-supply = <&vsys_5v0>;
+ gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ bootph-all;
+ };
+
+ vsys_io_1v8: regulator-5 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_io_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_io_1v2: regulator-6 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_io_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_default>;
+
+ led-0 {
+ gpios = <&main_gpio0 11 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-1 {
+ gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ default-state = "on";
+ };
+ };
+};
+
+&main_pmx0 {
+ main_i2c0_pins_default: main-i2c0-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */
+ J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */
+ >;
+ bootph-all;
+ };
+
+ main_uart0_pins_default: main-uart0-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */
+ J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */
+ >;
+ bootph-all;
+ };
+
+ vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x0244, PIN_OUTPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */
+ >;
+ bootph-all;
+ };
+
+ main_mmc1_pins_default: main-mmc1-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */
+ J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */
+ J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */
+ J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */
+ J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */
+ J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */
+ J722S_IOPAD(0x0240, PIN_INPUT, 7) /* (B24) MMC1_SDCD.GPIO1_48 */
+ >;
+ bootph-all;
+ };
+
+ mdio_pins_default: mdio-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */
+ J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
+ >;
+ };
+
+ rgmii1_pins_default: rgmii1-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */
+ J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */
+ J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */
+ J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */
+ J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */
+ J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */
+ J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */
+ J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */
+ J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */
+ J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */
+ J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
+ J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
+ >;
+ };
+
+ led_pins_default: led-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x002c, PIN_OUTPUT, 7) /* (K26) OSPI0_CSn0.GPIO0_11 */
+ J722S_IOPAD(0x0030, PIN_OUTPUT, 7) /* (K23) OSPI0_CSn1.GPIO0_12 */
+ >;
+ };
+
+ pmic_irq_pins_default: pmic-irq-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B23) EXTINTn */
+ >;
+ };
+
+ vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x0254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */
+ >;
+ };
+};
+
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins_default>;
+ status = "okay";
+};
+
+&cpsw3g_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins_default>;
+ status = "okay";
+
+ cpsw3g_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,min-output-impedance;
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&cpsw3g_phy0>;
+ status = "okay";
+};
+
+&main_gpio1 {
+ status = "okay";
+};
+
+&main_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart0_pins_default>;
+ bootph-all;
+ status = "okay";
+};
+
+&mcu_pmx0 {
+ wkup_uart0_pins_default: wkup-uart0-default-pins {
+ pinctrl-single,pins = <
+ J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */
+ J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */
+ J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */
+ J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */
+ >;
+ bootph-all;
+ };
+
+ wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+ pinctrl-single,pins = <
+ J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */
+ J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */
+ >;
+ bootph-all;
+ };
+};
+
+&wkup_uart0 {
+ /* WKUP UART0 is used by Device Manager firmware */
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_uart0_pins_default>;
+ bootph-all;
+ status = "reserved";
+};
+
+&wkup_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_i2c0_pins_default>;
+ clock-frequency = <100000>;
+ bootph-all;
+ status = "okay";
+
+ tps65219: pmic@30 {
+ compatible = "ti,tps65219";
+ reg = <0x30>;
+ buck1-supply = <&vsys_5v0>;
+ buck2-supply = <&vsys_5v0>;
+ buck3-supply = <&vsys_5v0>;
+ ldo1-supply = <&vdd_3v3>;
+ ldo3-supply = <&vdd_3v3>;
+ ldo4-supply = <&vdd_3v3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ bootph-all;
+ system-power-controller;
+ ti,power-button;
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "VDDSHV5_SDIO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-allow-bypass;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "VDD_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "VDDA_PHY_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "VDDA_PLL_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ rtc: rtc@68 {
+ compatible = "dallas,ds1340";
+ reg = <0x68>;
+ };
+};
+
+&sdhci1 {
+ /* SD/MMC */
+ vmmc-supply = <&vdd_mmc1>;
+ vqmmc-supply = <&vdd_sd_dv>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc1_pins_default>;
+ disable-wp;
+ cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+ cd-debounce-delay-ms = <100>;
+ bootph-all;
+ ti,fails-without-test-cd;
+ status = "okay";
+};
pinctrl-single,pins = <
J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
+ J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
reg = <0x680000 0x40000>;
};
- partition@740000 {
+ partition@6c0000 {
label = "ospi.env.backup";
- reg = <0x740000 0x40000>;
+ reg = <0x6c0000 0x40000>;
};
partition@800000 {
<&mcu_r5fss0_core1_memory_region>;
};
+&main_r5fss0 {
+ ti,cluster-mode = <0>;
+};
+
+&main_r5fss1 {
+ ti,cluster-mode = <0>;
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer3 {
+ status = "reserved";
+};
+
+&main_timer4 {
+ status = "reserved";
+};
+
+&main_timer5 {
+ status = "reserved";
+};
+
&main_r5fss0_core0 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
};
+&main_r5fss0 {
+ ti,cluster-mode = <0>;
+};
+
+&main_r5fss1 {
+ ti,cluster-mode = <0>;
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer3 {
+ status = "reserved";
+};
+
+&main_timer4 {
+ status = "reserved";
+};
+
+&main_timer5 {
+ status = "reserved";
+};
+
+&main_timer6 {
+ status = "reserved";
+};
+
+&main_timer7 {
+ status = "reserved";
+};
+
+&main_timer8 {
+ status = "reserved";
+};
+
+&main_timer9 {
+ status = "reserved";
+};
+
+&main_r5fss2 {
+ ti,cluster-mode = <0>;
+};
+
&main_r5fss0_core0 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
};
};
- mux0: mux-controller {
+ mux0: mux-controller-0 {
compatible = "gpio-mux";
#mux-state-cells = <1>;
mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>;
};
- mux1: mux-controller {
+ mux1: mux-controller-1 {
compatible = "gpio-mux";
#mux-state-cells = <1>;
mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
<&mcu_r5fss0_core1_memory_region>;
};
+&main_r5fss0 {
+ ti,cluster-mode = <0>;
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
&main_r5fss0_core0 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
no-map;
};
- c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+ c66_0_dma_memory_region: c66-dma-memory@a6000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa6000000 0x00 0x100000>;
no-map;
no-map;
};
- c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+ c66_1_dma_memory_region: c66-dma-memory@a7000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa7000000 0x00 0x100000>;
no-map;
<0x0 0x47034000 0x0 0x47034000 0x0 0x100>, /* HBMC Control */
<0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
<0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
- <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* HBMC/OSPI0 Memory */
- <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
+ <0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>, /* FSS data region 1 */
+ <0x4 0x00000000 0x4 0x00000000 0x4 0x00000000>; /* FSS data region 0/3 */
hbmc_mux: mux-controller@47000004 {
compatible = "reg-mux";
hbmc: hyperbus@47034000 {
compatible = "ti,am654-hbmc";
reg = <0x00 0x47034000 0x00 0x100>,
- <0x05 0x00000000 0x01 0x0000000>;
+ <0x05 0x00000000 0x01 0x00000000>;
power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 102 0>;
assigned-clocks = <&k3_clks 102 5>;
ospi0: spi@47040000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x0 0x47040000 0x0 0x100>,
- <0x5 0x00000000 0x1 0x0000000>;
+ <0x5 0x00000000 0x1 0x00000000>;
interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
ospi1: spi@47050000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x0 0x47050000 0x0 0x100>,
- <0x7 0x00000000 0x1 0x00000000>;
+ <0x7 0x00000000 0x1 0x00000000>;
interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
no-map;
};
- c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+ c66_0_dma_memory_region: c66-dma-memory@a6000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa6000000 0x00 0x100000>;
no-map;
no-map;
};
- c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+ c66_1_dma_memory_region: c66-dma-memory@a7000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa7000000 0x00 0x100000>;
no-map;
<&mcu_r5fss0_core1_memory_region>;
};
+&main_r5fss0 {
+ ti,cluster-mode = <0>;
+};
+
+&main_r5fss1 {
+ ti,cluster-mode = <0>;
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer12 {
+ status = "reserved";
+};
+
+&main_timer13 {
+ status = "reserved";
+};
+
+&main_timer14 {
+ status = "reserved";
+};
+
+&main_timer15 {
+ status = "reserved";
+};
+
&main_r5fss0_core0 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
};
+&main_r5fss0 {
+ ti,cluster-mode = <0>;
+};
+
+&main_r5fss1 {
+ ti,cluster-mode = <0>;
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer12 {
+ status = "reserved";
+};
+
+&main_timer13 {
+ status = "reserved";
+};
+
+&main_timer14 {
+ status = "reserved";
+};
+
+&main_timer15 {
+ status = "reserved";
+};
+
&main_r5fss0_core0 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
- <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
- <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>;
cbass_mcu_wakeup: bus@28380000 {
compatible = "simple-bus";
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
- <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
- <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
- <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */
};
};
};
&exp1 {
- p15 {
+ p15-hog {
/* P15 - EXP_MUX2 */
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
- <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
- <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>;
ospi0: spi@47040000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
};
};
- mux0: mux-controller {
+ mux0: mux-controller-0 {
compatible = "gpio-mux";
#mux-state-cells = <1>;
mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>;
};
- mux1: mux-controller {
+ mux1: mux-controller-1 {
compatible = "gpio-mux";
#mux-state-cells = <1>;
mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
<&mcu_r5fss0_core1_memory_region>;
};
+&main_r5fss0 {
+ ti,cluster-mode = <0>;
+};
+
+&main_r5fss1 {
+ ti,cluster-mode = <0>;
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer3 {
+ status = "reserved";
+};
+
+&main_timer4 {
+ status = "reserved";
+};
+
+&main_timer5 {
+ status = "reserved";
+};
+
&main_r5fss0_core0 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
- <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
- <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>;
cbass_mcu_wakeup: bus@28380000 {
compatible = "simple-bus";
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
- <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
- <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
- <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */
};
aliases {
serial0 = &wkup_uart0;
serial2 = &main_uart0;
+ serial3 = &main_uart5;
mmc0 = &sdhci0;
mmc1 = &sdhci1;
};
no-map;
};
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0000000 0x00 0x100000>;
+ no-map;
+ };
+
wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
+ mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c7x_0_dma_memory_region: c7x-dma-memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_0_memory_region: c7x-memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c7x_1_dma_memory_region: c7x-dma-memory@a4000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_1_memory_region: c7x-memory@a4100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: ipc-memories@a5000000 {
+ reg = <0x00 0xa5000000 0x00 0x1c00000>;
+ alignment = <0x1000>;
+ no-map;
+ };
};
vmain_pd: regulator-0 {
clocks = <&audio_refclk1>;
};
};
+
+ transceiver0: can-phy0 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+ standby-gpios = <&mcu_gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver1: can-phy1 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ };
+
+ transceiver2: can-phy2 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ standby-gpios = <&exp1 17 GPIO_ACTIVE_HIGH>;
+ };
};
&main_pmx0 {
+ main_mcan0_pins_default: main-mcan0-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x1dc, PIN_INPUT, 0) /* (C22) MCAN0_RX */
+ J722S_IOPAD(0x1d8, PIN_OUTPUT, 0) /*(D22) MCAN0_TX */
+ >;
+ };
+
main_i2c0_pins_default: main-i2c0-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */
bootph-all;
};
+ main_uart5_pins_default: main-uart5-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x0108, PIN_INPUT, 3) /* (J27) UART5_RXD */
+ J722S_IOPAD(0x010c, PIN_OUTPUT, 3) /* (H27) UART5_TXD */
+ >;
+ };
+
vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0120, PIN_INPUT, 7) /* (F27) MMC2_CMD.GPIO0_70 */
bootph-all;
};
+&main_uart5 {
+ /* MAIN UART 5 is used by System firmware */
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart5_pins_default>;
+ status = "reserved";
+};
+
&mcu_pmx0 {
+ mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+ pinctrl-single,pins = <
+ J722S_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (D8) MCU_MCAN0_RX */
+ J722S_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (B2) MCU_MCAN0_TX */
+ >;
+ };
+
+ mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+ pinctrl-single,pins = <
+ J722S_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (B1) MCU_MCAN1_RX */
+ J722S_MCU_IOPAD(0x03C, PIN_OUTPUT, 0) /*(C1) MCU_MCAN1_TX */
+ >;
+ };
+
+ mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+ pinctrl-single,pins = <
+ J722S_MCU_IOPAD(0x0030, PIN_OUTPUT, 7) /* (C3) MCU_GPIO0_12 */
+ >;
+ };
+
wkup_uart0_pins_default: wkup-uart0-default-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */
bootph-all;
};
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_wkup_r5_0: mbox-wkup-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+
+ mbox_c7x_0: mbox-c7x-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster3 {
+ status = "okay";
+
+ mbox_main_r5_0: mbox-main-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_c7x_1: mbox-c7x-1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0 {
+ status = "okay";
+};
+
+&main_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+};
+
+&c7x_0 {
+ mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
+ memory-region = <&c7x_0_dma_memory_region>,
+ <&c7x_0_memory_region>;
+ status = "okay";
+};
+
+&c7x_1 {
+ mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
+ memory-region = <&c7x_1_dma_memory_region>,
+ <&c7x_1_memory_region>;
+ status = "okay";
+};
+
&serdes_ln_ctrl {
idle-states = <J722S_SERDES0_LANE0_USB>,
<J722S_SERDES1_LANE0_PCIE0_LANE0>;
0 0 0 0
>;
};
+
+&mcu_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_pins_default>;
+ phys = <&transceiver0>;
+ status = "okay";
+};
+
+&mcu_mcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan1_pins_default>;
+ phys = <&transceiver1>;
+ status = "okay";
+};
+
+&main_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan0_pins_default>;
+ phys = <&transceiver2>;
+ status = "okay";
+};
+
+&mcu_gpio0 {
+ status = "okay";
+};
dr_mode = "otg";
};
};
+
+ main_r5fss0: r5fss@78400000 {
+ compatible = "ti,am62-r5fss";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x78400000 0x00 0x78400000 0x8000>,
+ <0x78500000 0x00 0x78500000 0x8000>;
+ power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+
+ main_r5fss0_core0: r5f@78400000 {
+ compatible = "ti,am62-r5f";
+ reg = <0x78400000 0x00008000>,
+ <0x78500000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ resets = <&k3_reset 262 1>;
+ firmware-name = "j722s-main-r5f0_0-fw";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <262>;
+ ti,sci-proc-ids = <0x04 0xff>;
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
+
+ c7x_0: dsp@7e000000 {
+ compatible = "ti,am62a-c7xv-dsp";
+ reg = <0x00 0x7e000000 0x00 0x00200000>;
+ reg-names = "l2sram";
+ resets = <&k3_reset 208 1>;
+ firmware-name = "j722s-c71_0-fw";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <208>;
+ ti,sci-proc-ids = <0x30 0xff>;
+ status = "disabled";
+ };
+
+ c7x_1: dsp@7e200000 {
+ compatible = "ti,am62a-c7xv-dsp";
+ reg = <0x00 0x7e200000 0x00 0x00200000>;
+ reg-names = "l2sram";
+ resets = <&k3_reset 268 1>;
+ firmware-name = "j722s-c71_1-fw";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <268>;
+ ti,sci-proc-ids = <0x31 0xff>;
+ status = "disabled";
+ };
+};
+
+/* MCU domain overrides */
+
+&mcu_r5fss0_core0 {
+ firmware-name = "j722s-mcu-r5f0_0-fw";
+};
+
+/* Wakeup domain overrides */
+
+&wkup_r5fss0_core0 {
+ firmware-name = "j722s-wkup-r5f0_0-fw";
};
&main_conf {
&main_gpio1 {
gpio-ranges = <&main_pmx0 7 101 25>, <&main_pmx0 42 137 5>,
<&main_pmx0 47 143 3>, <&main_pmx0 50 149 2>;
+ gpio-reserved-ranges = <0 7>, <32 10>;
ti,ngpio = <73>;
};
<&mcu_r5fss0_core1_memory_region>;
};
+&main_r5fss0 {
+ ti,cluster-mode = <0>;
+};
+
+&main_r5fss1 {
+ ti,cluster-mode = <0>;
+};
+
+&main_r5fss2 {
+ ti,cluster-mode = <0>;
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer3 {
+ status = "reserved";
+};
+
+&main_timer4 {
+ status = "reserved";
+};
+
+&main_timer5 {
+ status = "reserved";
+};
+
+&main_timer6 {
+ status = "reserved";
+};
+
+&main_timer7 {
+ status = "reserved";
+};
+
+&main_timer8 {
+ status = "reserved";
+};
+
+&main_timer9 {
+ status = "reserved";
+};
+
&main_r5fss0_core0 {
status = "okay";
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
serdes1_pcie0_link: phy@0 {
reg = <0>;
- cdns,num-lanes = <2>;
+ cdns,num-lanes = <4>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
- resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+ resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>,
+ <&serdes_wiz1 3>, <&serdes_wiz1 4>;
};
};
watchdog0: watchdog@2200000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2200000 0x00 0x100>;
- clocks = <&k3_clks 348 1>;
+ clocks = <&k3_clks 348 0>;
power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 348 0>;
assigned-clock-parents = <&k3_clks 348 4>;
watchdog1: watchdog@2210000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2210000 0x00 0x100>;
- clocks = <&k3_clks 349 1>;
+ clocks = <&k3_clks 349 0>;
power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 349 0>;
assigned-clock-parents = <&k3_clks 349 4>;
watchdog2: watchdog@2220000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2220000 0x00 0x100>;
- clocks = <&k3_clks 350 1>;
+ clocks = <&k3_clks 350 0>;
power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 350 0>;
assigned-clock-parents = <&k3_clks 350 4>;
watchdog3: watchdog@2230000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2230000 0x00 0x100>;
- clocks = <&k3_clks 351 1>;
+ clocks = <&k3_clks 351 0>;
power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 351 0>;
assigned-clock-parents = <&k3_clks 351 4>;
watchdog4: watchdog@2240000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2240000 0x00 0x100>;
- clocks = <&k3_clks 352 1>;
+ clocks = <&k3_clks 352 0>;
power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 352 0>;
assigned-clock-parents = <&k3_clks 352 4>;
watchdog5: watchdog@2250000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2250000 0x00 0x100>;
- clocks = <&k3_clks 353 1>;
+ clocks = <&k3_clks 353 0>;
power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 353 0>;
assigned-clock-parents = <&k3_clks 353 4>;
watchdog6: watchdog@2260000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2260000 0x00 0x100>;
- clocks = <&k3_clks 354 1>;
+ clocks = <&k3_clks 354 0>;
power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 354 0>;
assigned-clock-parents = <&k3_clks 354 4>;
watchdog7: watchdog@2270000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2270000 0x00 0x100>;
- clocks = <&k3_clks 355 1>;
+ clocks = <&k3_clks 355 0>;
power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 355 0>;
assigned-clock-parents = <&k3_clks 355 4>;
watchdog8: watchdog@22f0000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x22f0000 0x00 0x100>;
- clocks = <&k3_clks 360 1>;
+ clocks = <&k3_clks 360 0>;
power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 360 0>;
assigned-clock-parents = <&k3_clks 360 4>;
watchdog9: watchdog@2300000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2300000 0x00 0x100>;
- clocks = <&k3_clks 356 1>;
+ clocks = <&k3_clks 356 0>;
power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 356 0>;
assigned-clock-parents = <&k3_clks 356 4>;
watchdog10: watchdog@2310000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2310000 0x00 0x100>;
- clocks = <&k3_clks 357 1>;
+ clocks = <&k3_clks 357 0>;
power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 357 0>;
assigned-clock-parents = <&k3_clks 357 4>;
watchdog11: watchdog@2320000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2320000 0x00 0x100>;
- clocks = <&k3_clks 358 1>;
+ clocks = <&k3_clks 358 0>;
power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 358 0>;
assigned-clock-parents = <&k3_clks 358 4>;
watchdog12: watchdog@2330000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2330000 0x00 0x100>;
- clocks = <&k3_clks 359 1>;
+ clocks = <&k3_clks 359 0>;
power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 359 0>;
assigned-clock-parents = <&k3_clks 359 4>;
watchdog13: watchdog@23c0000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x23c0000 0x00 0x100>;
- clocks = <&k3_clks 361 1>;
+ clocks = <&k3_clks 361 0>;
power-domains = <&k3_pds 361 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 361 0>;
assigned-clock-parents = <&k3_clks 361 4>;
watchdog14: watchdog@23d0000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x23d0000 0x00 0x100>;
- clocks = <&k3_clks 362 1>;
+ clocks = <&k3_clks 362 0>;
power-domains = <&k3_pds 362 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 362 0>;
assigned-clock-parents = <&k3_clks 362 4>;
watchdog15: watchdog@23e0000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x23e0000 0x00 0x100>;
- clocks = <&k3_clks 363 1>;
+ clocks = <&k3_clks 363 0>;
power-domains = <&k3_pds 363 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 363 0>;
assigned-clock-parents = <&k3_clks 363 4>;
watchdog16: watchdog@23f0000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x23f0000 0x00 0x100>;
- clocks = <&k3_clks 364 1>;
+ clocks = <&k3_clks 364 0>;
power-domains = <&k3_pds 364 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 364 0>;
assigned-clock-parents = <&k3_clks 364 4>;
watchdog17: watchdog@2540000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2540000 0x00 0x100>;
- clocks = <&k3_clks 365 1>;
+ clocks = <&k3_clks 365 0>;
power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 365 0>;
assigned-clock-parents = <&k3_clks 366 4>;
watchdog18: watchdog@2550000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0x2550000 0x00 0x100>;
- clocks = <&k3_clks 366 1>;
+ clocks = <&k3_clks 366 0>;
power-domains = <&k3_pds 366 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 366 0>;
assigned-clock-parents = <&k3_clks 366 4>;
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
- <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
- <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
- <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */
- <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
+ ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00000100>, /* FSS Control */
+ <0x00 0x47040000 0x00 0x47040000 0x00 0x00000100>, /* OSPI0 Control */
+ <0x00 0x47050000 0x00 0x47050000 0x00 0x00000100>, /* OSPI1 Control */
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */
ospi0: spi@47040000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x00 0x47040000 0x00 0x100>,
- <0x05 0x0000000 0x01 0x0000000>;
+ <0x05 0x00000000 0x01 0x00000000>;
interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
ospi1: spi@47050000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x00 0x47050000 0x00 0x100>,
- <0x07 0x0000000 0x01 0x0000000>;
+ <0x07 0x00000000 0x01 0x00000000>;
interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
- <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
- <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>;
cbass_mcu_wakeup: bus@28380000 {
bootph-all;
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
- <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
- <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
- <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */
};
};
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
- clocks = <&pismu TMPV770X_CLK_PIUART0>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PIUART0>, <&pismu TMPV770X_CLK_PIUART0>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
- clocks = <&pismu TMPV770X_CLK_PIUART1>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PIUART1>, <&pismu TMPV770X_CLK_PIUART1>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
- clocks = <&pismu TMPV770X_CLK_PIUART2>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PIUART2>, <&pismu TMPV770X_CLK_PIUART2>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
- clocks = <&pismu TMPV770X_CLK_PIUART2>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PIUART2>, <&pismu TMPV770X_CLK_PIUART2>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&pismu TMPV770X_CLK_PISPI1>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PISPI1>, <&pismu TMPV770X_CLK_PISPI1>;
+ clock-names = "sspclk", "apb_pclk";
status = "disabled";
};
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&pismu TMPV770X_CLK_PISPI1>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PISPI1>, <&pismu TMPV770X_CLK_PISPI1>;
+ clock-names = "sspclk", "apb_pclk";
status = "disabled";
};
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&pismu TMPV770X_CLK_PISPI2>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PISPI2>, <&pismu TMPV770X_CLK_PISPI2>;
+ clock-names = "sspclk", "apb_pclk";
status = "disabled";
};
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&pismu TMPV770X_CLK_PISPI3>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PISPI3>, <&pismu TMPV770X_CLK_PISPI3>;
+ clock-names = "sspclk", "apb_pclk";
status = "disabled";
};
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&pismu TMPV770X_CLK_PISPI4>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PISPI4>, <&pismu TMPV770X_CLK_PISPI4>;
+ clock-names = "sspclk", "apb_pclk";
status = "disabled";
};
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&pismu TMPV770X_CLK_PISPI5>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PISPI5>, <&pismu TMPV770X_CLK_PISPI5>;
+ clock-names = "sspclk", "apb_pclk";
status = "disabled";
};
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&pismu TMPV770X_CLK_PISPI6>;
- clock-names = "apb_pclk";
+ clocks = <&pismu TMPV770X_CLK_PISPI6>, <&pismu TMPV770X_CLK_PISPI6>;
+ clock-names = "sspclk", "apb_pclk";
status = "disabled";
};
&pcie {
status = "okay";
+ phys = <&psgtr 0 PHY_TYPE_PCIE 0 0>;
};
&psgtr {
clock-frequency = <25000000>;
};
+&sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ no-mmc;
+ no-sdio;
+ disable-wp;
+};
+
&uart0 {
status = "okay";
};
status = "disabled";
};
+ dmac: dma-controller@4330000 {
+ compatible = "snps,axi-dma-1.01a";
+ reg = <0x04330000 0x1000>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk CLK_SDMA_AXI>, <&clk CLK_SDMA_AXI>;
+ clock-names = "core-clk", "cfgr-clk";
+ #dma-cells = <1>;
+ dma-channels = <8>;
+ snps,block-size = <1024 1024 1024 1024
+ 1024 1024 1024 1024>;
+ snps,priority = <0 1 2 3 4 5 6 7>;
+ snps,dma-masters = <2>;
+ snps,data-width = <4>;
+ status = "disabled";
+ };
+
plic: interrupt-controller@70000000 {
reg = <0x70000000 0x4000000>;
interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
clock-frequency = <25000000>;
};
+&emmc {
+ bus-width = <4>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ wp-inverted;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ mcu: syscon@17 {
+ compatible = "sophgo,sg2042-hwmon-mcu";
+ reg = <0x17>;
+ #thermal-sensor-cells = <1>;
+ };
+};
+
+&sd {
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ wp-inverted;
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
+
+/ {
+ thermal-zones {
+ soc-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+ thermal-sensors = <&mcu 0>;
+
+ trips {
+ soc_active1: soc-active1 {
+ temperature = <30000>;
+ hysteresis = <8000>;
+ type = "active";
+ };
+
+ soc_active2: soc-active2 {
+ temperature = <58000>;
+ hysteresis = <12000>;
+ type = "active";
+ };
+
+ soc_active3: soc-active3 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+
+ soc_hot: soc-hot {
+ temperature = <80000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+ };
+ };
+
+ board-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+ thermal-sensors = <&mcu 1>;
+
+ trips {
+ board_active: board-active {
+ temperature = <75000>;
+ hysteresis = <8000>;
+ type = "active";
+ };
+ };
+ };
+ };
+};
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
+ interrupt-parent = <&intc>;
ranges;
+ i2c0: i2c@7030005000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x70 0x30005000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkgen GATE_CLK_APB_I2C>;
+ clock-names = "ref";
+ clock-frequency = <100000>;
+ interrupts = <101 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rstgen RST_I2C0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@7030006000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x70 0x30006000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkgen GATE_CLK_APB_I2C>;
+ clock-names = "ref";
+ clock-frequency = <100000>;
+ interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rstgen RST_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@7030007000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x70 0x30007000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkgen GATE_CLK_APB_I2C>;
+ clock-names = "ref";
+ clock-frequency = <100000>;
+ interrupts = <103 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rstgen RST_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@7030008000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x70 0x30008000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkgen GATE_CLK_APB_I2C>;
+ clock-names = "ref";
+ clock-frequency = <100000>;
+ interrupts = <104 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rstgen RST_I2C3>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@7030009000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x70 0x30009000 0x0 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkgen GATE_CLK_APB_GPIO>,
+ <&clkgen GATE_CLK_GPIO_DB>;
+ clock-names = "bus", "db";
+
+ port0a: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@703000a000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x70 0x3000a000 0x0 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkgen GATE_CLK_APB_GPIO>,
+ <&clkgen GATE_CLK_GPIO_DB>;
+ clock-names = "bus", "db";
+
+ port1a: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <97 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio2: gpio@703000b000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x70 0x3000b000 0x0 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkgen GATE_CLK_APB_GPIO>,
+ <&clkgen GATE_CLK_GPIO_DB>;
+ clock-names = "bus", "db";
+
+ port2a: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <98 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
pllclk: clock-controller@70300100c0 {
compatible = "sophgo,sg2042-pll";
reg = <0x70 0x300100c0 0x0 0x40>;
uart0: serial@7040000000 {
compatible = "snps,dw-apb-uart";
reg = <0x00000070 0x40000000 0x00000000 0x00001000>;
- interrupt-parent = <&intc>;
interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <500000000>;
clocks = <&clkgen GATE_CLK_UART_500M>,
resets = <&rstgen RST_UART0>;
status = "disabled";
};
+
+ emmc: mmc@704002a000 {
+ compatible = "sophgo,sg2042-dwcmshc";
+ reg = <0x70 0x4002a000 0x0 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <134 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkgen GATE_CLK_EMMC_100M>,
+ <&clkgen GATE_CLK_AXI_EMMC>,
+ <&clkgen GATE_CLK_100K_EMMC>;
+ clock-names = "core",
+ "bus",
+ "timer";
+ status = "disabled";
+ };
+
+ sd: mmc@704002b000 {
+ compatible = "sophgo,sg2042-dwcmshc";
+ reg = <0x70 0x4002b000 0x0 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkgen GATE_CLK_SD_100M>,
+ <&clkgen GATE_CLK_AXI_SD>,
+ <&clkgen GATE_CLK_100K_SD>;
+ clock-names = "core",
+ "bus",
+ "timer";
+ status = "disabled";
+ };
};
};
assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
<&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
assigned-clock-rates = <49500000>, <198000000>;
- status = "okay";
ports {
#address-cells = <1>;
&csi2rx {
assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
assigned-clock-rates = <297000000>;
- status = "okay";
ports {
#address-cells = <1>;
};
&phy0 {
- rx-internal-delay-ps = <1900>;
- tx-internal-delay-ps = <1500>;
+ rx-internal-delay-ps = <1500>;
motorcomm,rx-clk-drv-microamp = <2910>;
motorcomm,rx-data-drv-microamp = <2910>;
motorcomm,tx-clk-adj-enabled;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
+ spi0 = &spi0;
};
chosen {
clock-frequency = <32768>;
};
-&apb_clk {
- clock-frequency = <62500000>;
-};
-
-&sdhci_clk {
- clock-frequency = <198000000>;
-};
-
-&uart_sclk {
- clock-frequency = <100000000>;
-};
-
&dmac0 {
status = "okay";
};
&uart0 {
status = "okay";
};
+
+&spi0 {
+ status = "okay";
+};
clock-frequency = <32768>;
};
-&apb_clk {
- clock-frequency = <62500000>;
-};
-
-&sdhci_clk {
- clock-frequency = <198000000>;
-};
-
-&uart_sclk {
- clock-frequency = <100000000>;
-};
-
&dmac0 {
status = "okay";
};
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
+ spi0 = &spi0;
};
chosen {
&uart0 {
status = "okay";
};
+
+&spi0 {
+ status = "okay";
+};
*/
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/thead,th1520-clk-ap.h>
/ {
compatible = "thead,th1520";
#clock-cells = <0>;
};
- apb_clk: apb-clk-clock {
- compatible = "fixed-clock";
- clock-output-names = "apb_clk";
- #clock-cells = <0>;
- };
-
- uart_sclk: uart-sclk-clock {
- compatible = "fixed-clock";
- clock-output-names = "uart_sclk";
- #clock-cells = <0>;
- };
-
- sdhci_clk: sdhci-clock {
- compatible = "fixed-clock";
- clock-frequency = <198000000>;
- clock-output-names = "sdhci_clk";
- #clock-cells = <0>;
- };
-
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
<&cpu3_intc 3>, <&cpu3_intc 7>;
};
+ spi0: spi@ffe700c000 {
+ compatible = "thead,th1520-spi", "snps,dw-apb-ssi";
+ reg = <0xff 0xe700c000 0x0 0x1000>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk CLK_SPI>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart0: serial@ffe7014000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7014000 0x0 0x100>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART0_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe7080000 0x0 0x10000>;
interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdhci_clk>;
+ clocks = <&clk CLK_EMMC_SDIO>;
clock-names = "core";
status = "disabled";
};
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe7090000 0x0 0x10000>;
interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdhci_clk>;
+ clocks = <&clk CLK_EMMC_SDIO>;
clock-names = "core";
status = "disabled";
};
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe70a0000 0x0 0x10000>;
interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdhci_clk>;
+ clocks = <&clk CLK_EMMC_SDIO>;
clock-names = "core";
status = "disabled";
};
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7f00000 0x0 0x100>;
interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART1_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7f04000 0x0 0x100>;
interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART3_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
reg = <0xff 0xe7f34000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clk CLK_GPIO2>;
portc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
reg = <0xff 0xe7f38000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clk CLK_GPIO3>;
portd: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
reg = <0xff 0xec005000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clk CLK_GPIO0>;
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
reg = <0xff 0xec006000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clk CLK_GPIO1>;
portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
compatible = "snps,dw-apb-uart";
reg = <0xff 0xec010000 0x0 0x4000>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART2_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
+ clk: clock-controller@ffef010000 {
+ compatible = "thead,th1520-clk-ap";
+ reg = <0xff 0xef010000 0x0 0x1000>;
+ clocks = <&osc>;
+ #clock-cells = <1>;
+ };
+
dmac0: dma-controller@ffefc00000 {
compatible = "snps,axi-dma-1.01a";
reg = <0xff 0xefc00000 0x0 0x1000>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb_clk>, <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>, <&clk CLK_PERI_APB_PCLK>;
clock-names = "core-clk", "cfgr-clk";
#dma-cells = <1>;
dma-channels = <4>;
timer0: timer@ffefc32000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32000 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
timer1: timer@ffefc32014 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32014 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
timer2: timer@ffefc32028 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32028 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
timer3: timer@ffefc3203c {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc3203c 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
compatible = "snps,dw-apb-uart";
reg = <0xff 0xf7f08000 0x0 0x4000>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART4_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
compatible = "snps,dw-apb-uart";
reg = <0xff 0xf7f0c000 0x0 0x4000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART5_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
timer4: timer@ffffc33000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33000 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
timer5: timer@ffffc33014 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33014 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
timer6: timer@ffffc33028 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33028 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
timer7: timer@ffffc3303c {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc3303c 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
projects / thirdparty / u-boot.git / commitdiff
