--- /dev/null
+/** @file
+ Serial IO protocol as defined in the UEFI 2.0 specification.
+
+ Abstraction of a basic serial device. Targeted at 16550 UART, but
+ could be much more generic.
+
+ Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __SERIAL_IO_PROTOCOL_H__
+#define __SERIAL_IO_PROTOCOL_H__
+
+FILE_LICENCE ( BSD3 );
+
+#define EFI_SERIAL_IO_PROTOCOL_GUID \
+ { \
+ 0xBB25CF6F, 0xF1D4, 0x11D2, {0x9A, 0x0C, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0xFD } \
+ }
+
+///
+/// Protocol GUID defined in EFI1.1.
+///
+#define SERIAL_IO_PROTOCOL EFI_SERIAL_IO_PROTOCOL_GUID
+
+typedef struct _EFI_SERIAL_IO_PROTOCOL EFI_SERIAL_IO_PROTOCOL;
+
+
+///
+/// Backward-compatible with EFI1.1.
+///
+typedef EFI_SERIAL_IO_PROTOCOL SERIAL_IO_INTERFACE;
+
+///
+/// Parity type that is computed or checked as each character is transmitted or received. If the
+/// device does not support parity, the value is the default parity value.
+///
+typedef enum {
+ DefaultParity,
+ NoParity,
+ EvenParity,
+ OddParity,
+ MarkParity,
+ SpaceParity
+} EFI_PARITY_TYPE;
+
+///
+/// Stop bits type
+///
+typedef enum {
+ DefaultStopBits,
+ OneStopBit,
+ OneFiveStopBits,
+ TwoStopBits
+} EFI_STOP_BITS_TYPE;
+
+//
+// define for Control bits, grouped by read only, write only, and read write
+//
+//
+// Read Only
+//
+#define EFI_SERIAL_CLEAR_TO_SEND 0x00000010
+#define EFI_SERIAL_DATA_SET_READY 0x00000020
+#define EFI_SERIAL_RING_INDICATE 0x00000040
+#define EFI_SERIAL_CARRIER_DETECT 0x00000080
+#define EFI_SERIAL_INPUT_BUFFER_EMPTY 0x00000100
+#define EFI_SERIAL_OUTPUT_BUFFER_EMPTY 0x00000200
+
+//
+// Write Only
+//
+#define EFI_SERIAL_REQUEST_TO_SEND 0x00000002
+#define EFI_SERIAL_DATA_TERMINAL_READY 0x00000001
+
+//
+// Read Write
+//
+#define EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE 0x00001000
+#define EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE 0x00002000
+#define EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE 0x00004000
+
+//
+// Serial IO Member Functions
+//
+/**
+ Reset the serial device.
+
+ @param This Protocol instance pointer.
+
+ @retval EFI_SUCCESS The device was reset.
+ @retval EFI_DEVICE_ERROR The serial device could not be reset.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_RESET)(
+ IN EFI_SERIAL_IO_PROTOCOL *This
+ );
+
+/**
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ data buts, and stop bits on a serial device.
+
+ @param This Protocol instance pointer.
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
+ device's default interface speed.
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
+ serial interface. A ReceiveFifoDepth value of 0 will use
+ the device's default FIFO depth.
+ @param Timeout The requested time out for a single character in microseconds.
+ This timeout applies to both the transmit and receive side of the
+ interface. A Timeout value of 0 will use the device's default time
+ out value.
+ @param Parity The type of parity to use on this serial device. A Parity value of
+ DefaultParity will use the device's default parity value.
+ @param DataBits The number of data bits to use on the serial device. A DataBits
+ vaule of 0 will use the device's default data bit setting.
+ @param StopBits The number of stop bits to use on this serial device. A StopBits
+ value of DefaultStopBits will use the device's default number of
+ stop bits.
+
+ @retval EFI_SUCCESS The device was reset.
+ @retval EFI_DEVICE_ERROR The serial device could not be reset.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_SET_ATTRIBUTES)(
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN UINT64 BaudRate,
+ IN UINT32 ReceiveFifoDepth,
+ IN UINT32 Timeout,
+ IN EFI_PARITY_TYPE Parity,
+ IN UINT8 DataBits,
+ IN EFI_STOP_BITS_TYPE StopBits
+ );
+
+/**
+ Set the control bits on a serial device
+
+ @param This Protocol instance pointer.
+ @param Control Set the bits of Control that are settable.
+
+ @retval EFI_SUCCESS The new control bits were set on the serial device.
+ @retval EFI_UNSUPPORTED The serial device does not support this operation.
+ @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_SET_CONTROL_BITS)(
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN UINT32 Control
+ );
+
+/**
+ Retrieves the status of thecontrol bits on a serial device
+
+ @param This Protocol instance pointer.
+ @param Control A pointer to return the current Control signals from the serial device.
+
+ @retval EFI_SUCCESS The control bits were read from the serial device.
+ @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_GET_CONTROL_BITS)(
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ OUT UINT32 *Control
+ );
+
+/**
+ Writes data to a serial device.
+
+ @param This Protocol instance pointer.
+ @param BufferSize On input, the size of the Buffer. On output, the amount of
+ data actually written.
+ @param Buffer The buffer of data to write
+
+ @retval EFI_SUCCESS The data was written.
+ @retval EFI_DEVICE_ERROR The device reported an error.
+ @retval EFI_TIMEOUT The data write was stopped due to a timeout.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_WRITE)(
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN OUT UINTN *BufferSize,
+ IN VOID *Buffer
+ );
+
+/**
+ Writes data to a serial device.
+
+ @param This Protocol instance pointer.
+ @param BufferSize On input, the size of the Buffer. On output, the amount of
+ data returned in Buffer.
+ @param Buffer The buffer to return the data into.
+
+ @retval EFI_SUCCESS The data was read.
+ @retval EFI_DEVICE_ERROR The device reported an error.
+ @retval EFI_TIMEOUT The data write was stopped due to a timeout.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_READ)(
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN OUT UINTN *BufferSize,
+ OUT VOID *Buffer
+ );
+
+/**
+ @par Data Structure Description:
+ The data values in SERIAL_IO_MODE are read-only and are updated by the code
+ that produces the SERIAL_IO_PROTOCOL member functions.
+
+ @param ControlMask
+ A mask for the Control bits that the device supports. The device
+ must always support the Input Buffer Empty control bit.
+
+ @param TimeOut
+ If applicable, the number of microseconds to wait before timing out
+ a Read or Write operation.
+
+ @param BaudRate
+ If applicable, the current baud rate setting of the device; otherwise,
+ baud rate has the value of zero to indicate that device runs at the
+ device's designed speed.
+
+ @param ReceiveFifoDepth
+ The number of characters the device will buffer on input
+
+ @param DataBits
+ The number of characters the device will buffer on input
+
+ @param Parity
+ If applicable, this is the EFI_PARITY_TYPE that is computed or
+ checked as each character is transmitted or reveived. If the device
+ does not support parity the value is the default parity value.
+
+ @param StopBits
+ If applicable, the EFI_STOP_BITS_TYPE number of stop bits per
+ character. If the device does not support stop bits the value is
+ the default stop bit values.
+
+**/
+typedef struct {
+ UINT32 ControlMask;
+
+ //
+ // current Attributes
+ //
+ UINT32 Timeout;
+ UINT64 BaudRate;
+ UINT32 ReceiveFifoDepth;
+ UINT32 DataBits;
+ UINT32 Parity;
+ UINT32 StopBits;
+} EFI_SERIAL_IO_MODE;
+
+#define EFI_SERIAL_IO_PROTOCOL_REVISION 0x00010000
+#define SERIAL_IO_INTERFACE_REVISION EFI_SERIAL_IO_PROTOCOL_REVISION
+
+///
+/// The Serial I/O protocol is used to communicate with UART-style serial devices.
+/// These can be standard UART serial ports in PC-AT systems, serial ports attached
+/// to a USB interface, or potentially any character-based I/O device.
+///
+struct _EFI_SERIAL_IO_PROTOCOL {
+ ///
+ /// The revision to which the EFI_SERIAL_IO_PROTOCOL adheres. All future revisions
+ /// must be backwards compatible. If a future version is not backwards compatible,
+ /// it is not the same GUID.
+ ///
+ UINT32 Revision;
+ EFI_SERIAL_RESET Reset;
+ EFI_SERIAL_SET_ATTRIBUTES SetAttributes;
+ EFI_SERIAL_SET_CONTROL_BITS SetControl;
+ EFI_SERIAL_GET_CONTROL_BITS GetControl;
+ EFI_SERIAL_WRITE Write;
+ EFI_SERIAL_READ Read;
+ ///
+ /// Pointer to SERIAL_IO_MODE data.
+ ///
+ EFI_SERIAL_IO_MODE *Mode;
+};
+
+extern EFI_GUID gEfiSerialIoProtocolGuid;
+
+#endif
--- /dev/null
+/** @file
+ UGA Draw protocol from the EFI 1.10 specification.
+
+ Abstraction of a very simple graphics device.
+
+ Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __UGA_DRAW_H__
+#define __UGA_DRAW_H__
+
+FILE_LICENCE ( BSD3 );
+
+
+#define EFI_UGA_DRAW_PROTOCOL_GUID \
+ { \
+ 0x982c298b, 0xf4fa, 0x41cb, {0xb8, 0x38, 0x77, 0xaa, 0x68, 0x8f, 0xb8, 0x39 } \
+ }
+
+typedef struct _EFI_UGA_DRAW_PROTOCOL EFI_UGA_DRAW_PROTOCOL;
+
+/**
+ Return the current video mode information.
+
+ @param This The EFI_UGA_DRAW_PROTOCOL instance.
+ @param HorizontalResolution The size of video screen in pixels in the X dimension.
+ @param VerticalResolution The size of video screen in pixels in the Y dimension.
+ @param ColorDepth Number of bits per pixel, currently defined to be 32.
+ @param RefreshRate The refresh rate of the monitor in Hertz.
+
+ @retval EFI_SUCCESS Mode information returned.
+ @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
+ @retval EFI_INVALID_PARAMETER One of the input args was NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_UGA_DRAW_PROTOCOL_GET_MODE)(
+ IN EFI_UGA_DRAW_PROTOCOL *This,
+ OUT UINT32 *HorizontalResolution,
+ OUT UINT32 *VerticalResolution,
+ OUT UINT32 *ColorDepth,
+ OUT UINT32 *RefreshRate
+ );
+
+/**
+ Set the current video mode information.
+
+ @param This The EFI_UGA_DRAW_PROTOCOL instance.
+ @param HorizontalResolution The size of video screen in pixels in the X dimension.
+ @param VerticalResolution The size of video screen in pixels in the Y dimension.
+ @param ColorDepth Number of bits per pixel, currently defined to be 32.
+ @param RefreshRate The refresh rate of the monitor in Hertz.
+
+ @retval EFI_SUCCESS Mode information returned.
+ @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_UGA_DRAW_PROTOCOL_SET_MODE)(
+ IN EFI_UGA_DRAW_PROTOCOL *This,
+ IN UINT32 HorizontalResolution,
+ IN UINT32 VerticalResolution,
+ IN UINT32 ColorDepth,
+ IN UINT32 RefreshRate
+ );
+
+typedef struct {
+ UINT8 Blue;
+ UINT8 Green;
+ UINT8 Red;
+ UINT8 Reserved;
+} EFI_UGA_PIXEL;
+
+typedef union {
+ EFI_UGA_PIXEL Pixel;
+ UINT32 Raw;
+} EFI_UGA_PIXEL_UNION;
+
+///
+/// Enumration value for actions of Blt operations.
+///
+typedef enum {
+ EfiUgaVideoFill, ///< Write data from the BltBuffer pixel (SourceX, SourceY)
+ ///< directly to every pixel of the video display rectangle
+ ///< (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
+ ///< Only one pixel will be used from the BltBuffer. Delta is NOT used.
+
+ EfiUgaVideoToBltBuffer, ///< Read data from the video display rectangle
+ ///< (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
+ ///< the BltBuffer rectangle (DestinationX, DestinationY )
+ ///< (DestinationX + Width, DestinationY + Height). If DestinationX or
+ ///< DestinationY is not zero then Delta must be set to the length in bytes
+ ///< of a row in the BltBuffer.
+
+ EfiUgaBltBufferToVideo, ///< Write data from the BltBuffer rectangle
+ ///< (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
+ ///< video display rectangle (DestinationX, DestinationY)
+ ///< (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
+ ///< not zero then Delta must be set to the length in bytes of a row in the
+ ///< BltBuffer.
+
+ EfiUgaVideoToVideo, ///< Copy from the video display rectangle (SourceX, SourceY)
+ ///< (SourceX + Width, SourceY + Height) .to the video display rectangle
+ ///< (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
+ ///< The BltBuffer and Delta are not used in this mode.
+
+ EfiUgaBltMax ///< Maxmimum value for enumration value of Blt operation. If a Blt operation
+ ///< larger or equal to this enumration value, it is invalid.
+} EFI_UGA_BLT_OPERATION;
+
+/**
+ Blt a rectangle of pixels on the graphics screen.
+
+ @param[in] This - Protocol instance pointer.
+ @param[in] BltBuffer - Buffer containing data to blit into video buffer. This
+ buffer has a size of Width*Height*sizeof(EFI_UGA_PIXEL)
+ @param[in] BltOperation - Operation to perform on BlitBuffer and video memory
+ @param[in] SourceX - X coordinate of source for the BltBuffer.
+ @param[in] SourceY - Y coordinate of source for the BltBuffer.
+ @param[in] DestinationX - X coordinate of destination for the BltBuffer.
+ @param[in] DestinationY - Y coordinate of destination for the BltBuffer.
+ @param[in] Width - Width of rectangle in BltBuffer in pixels.
+ @param[in] Height - Hight of rectangle in BltBuffer in pixels.
+ @param[in] Delta - OPTIONAL
+
+ @retval EFI_SUCCESS - The Blt operation completed.
+ @retval EFI_INVALID_PARAMETER - BltOperation is not valid.
+ @retval EFI_DEVICE_ERROR - A hardware error occured writting to the video buffer.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_UGA_DRAW_PROTOCOL_BLT)(
+ IN EFI_UGA_DRAW_PROTOCOL * This,
+ IN EFI_UGA_PIXEL * BltBuffer, OPTIONAL
+ IN EFI_UGA_BLT_OPERATION BltOperation,
+ IN UINTN SourceX,
+ IN UINTN SourceY,
+ IN UINTN DestinationX,
+ IN UINTN DestinationY,
+ IN UINTN Width,
+ IN UINTN Height,
+ IN UINTN Delta OPTIONAL
+ );
+
+///
+/// This protocol provides a basic abstraction to set video modes and
+/// copy pixels to and from the graphics controller's frame buffer.
+///
+struct _EFI_UGA_DRAW_PROTOCOL {
+ EFI_UGA_DRAW_PROTOCOL_GET_MODE GetMode;
+ EFI_UGA_DRAW_PROTOCOL_SET_MODE SetMode;
+ EFI_UGA_DRAW_PROTOCOL_BLT Blt;
+};
+
+extern EFI_GUID gEfiUgaDrawProtocolGuid;
+
+#endif
--- /dev/null
+/** @file
+ Unicode Collation protocol that follows the UEFI 2.0 specification.
+ This protocol is used to allow code running in the boot services environment
+ to perform lexical comparison functions on Unicode strings for given languages.
+
+Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed and made available under
+the terms and conditions of the BSD License that accompanies this distribution.
+The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php.
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __UNICODE_COLLATION_H__
+#define __UNICODE_COLLATION_H__
+
+FILE_LICENCE ( BSD3 );
+
+#define EFI_UNICODE_COLLATION_PROTOCOL_GUID \
+ { \
+ 0x1d85cd7f, 0xf43d, 0x11d2, {0x9a, 0xc, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d } \
+ }
+
+#define EFI_UNICODE_COLLATION_PROTOCOL2_GUID \
+ { \
+ 0xa4c751fc, 0x23ae, 0x4c3e, {0x92, 0xe9, 0x49, 0x64, 0xcf, 0x63, 0xf3, 0x49 } \
+ }
+
+typedef struct _EFI_UNICODE_COLLATION_PROTOCOL EFI_UNICODE_COLLATION_PROTOCOL;
+
+
+///
+/// Protocol GUID name defined in EFI1.1.
+///
+#define UNICODE_COLLATION_PROTOCOL EFI_UNICODE_COLLATION_PROTOCOL_GUID
+
+///
+/// Protocol defined in EFI1.1.
+///
+typedef EFI_UNICODE_COLLATION_PROTOCOL UNICODE_COLLATION_INTERFACE;
+
+///
+/// Protocol data structures and defines
+///
+#define EFI_UNICODE_BYTE_ORDER_MARK (CHAR16) (0xfeff)
+
+//
+// Protocol member functions
+//
+/**
+ Performs a case-insensitive comparison of two Null-terminated strings.
+
+ @param This A pointer to the EFI_UNICODE_COLLATION_PROTOCOL instance.
+ @param Str1 A pointer to a Null-terminated string.
+ @param Str2 A pointer to a Null-terminated string.
+
+ @retval 0 Str1 is equivalent to Str2.
+ @retval >0 Str1 is lexically greater than Str2.
+ @retval <0 Str1 is lexically less than Str2.
+
+**/
+typedef
+INTN
+(EFIAPI *EFI_UNICODE_COLLATION_STRICOLL)(
+ IN EFI_UNICODE_COLLATION_PROTOCOL *This,
+ IN CHAR16 *Str1,
+ IN CHAR16 *Str2
+ );
+
+/**
+ Performs a case-insensitive comparison of a Null-terminated
+ pattern string and a Null-terminated string.
+
+ @param This A pointer to the EFI_UNICODE_COLLATION_PROTOCOL instance.
+ @param String A pointer to a Null-terminated string.
+ @param Pattern A pointer to a Null-terminated pattern string.
+
+ @retval TRUE Pattern was found in String.
+ @retval FALSE Pattern was not found in String.
+
+**/
+typedef
+BOOLEAN
+(EFIAPI *EFI_UNICODE_COLLATION_METAIMATCH)(
+ IN EFI_UNICODE_COLLATION_PROTOCOL *This,
+ IN CHAR16 *String,
+ IN CHAR16 *Pattern
+ );
+
+/**
+ Converts all the characters in a Null-terminated string to
+ lower case characters.
+
+ @param This A pointer to the EFI_UNICODE_COLLATION_PROTOCOL instance.
+ @param String A pointer to a Null-terminated string.
+
+**/
+typedef
+VOID
+(EFIAPI *EFI_UNICODE_COLLATION_STRLWR)(
+ IN EFI_UNICODE_COLLATION_PROTOCOL *This,
+ IN OUT CHAR16 *Str
+ );
+
+/**
+ Converts all the characters in a Null-terminated string to upper
+ case characters.
+
+ @param This A pointer to the EFI_UNICODE_COLLATION_PROTOCOL instance.
+ @param String A pointer to a Null-terminated string.
+
+**/
+typedef
+VOID
+(EFIAPI *EFI_UNICODE_COLLATION_STRUPR)(
+ IN EFI_UNICODE_COLLATION_PROTOCOL *This,
+ IN OUT CHAR16 *Str
+ );
+
+/**
+ Converts an 8.3 FAT file name in an OEM character set to a Null-terminated
+ string.
+
+ @param This A pointer to the EFI_UNICODE_COLLATION_PROTOCOL instance.
+ @param FatSize The size of the string Fat in bytes.
+ @param Fat A pointer to a Null-terminated string that contains an 8.3 file
+ name using an 8-bit OEM character set.
+ @param String A pointer to a Null-terminated string. The string must
+ be allocated in advance to hold FatSize characters.
+
+**/
+typedef
+VOID
+(EFIAPI *EFI_UNICODE_COLLATION_FATTOSTR)(
+ IN EFI_UNICODE_COLLATION_PROTOCOL *This,
+ IN UINTN FatSize,
+ IN CHAR8 *Fat,
+ OUT CHAR16 *String
+ );
+
+/**
+ Converts a Null-terminated string to legal characters in a FAT
+ filename using an OEM character set.
+
+ @param This A pointer to the EFI_UNICODE_COLLATION_PROTOCOL instance.
+ @param String A pointer to a Null-terminated string.
+ @param FatSize The size of the string Fat in bytes.
+ @param Fat A pointer to a string that contains the converted version of
+ String using legal FAT characters from an OEM character set.
+
+ @retval TRUE One or more conversions failed and were substituted with '_'
+ @retval FALSE None of the conversions failed.
+
+**/
+typedef
+BOOLEAN
+(EFIAPI *EFI_UNICODE_COLLATION_STRTOFAT)(
+ IN EFI_UNICODE_COLLATION_PROTOCOL *This,
+ IN CHAR16 *String,
+ IN UINTN FatSize,
+ OUT CHAR8 *Fat
+ );
+
+///
+/// The EFI_UNICODE_COLLATION_PROTOCOL is used to perform case-insensitive
+/// comparisons of strings.
+///
+struct _EFI_UNICODE_COLLATION_PROTOCOL {
+ EFI_UNICODE_COLLATION_STRICOLL StriColl;
+ EFI_UNICODE_COLLATION_METAIMATCH MetaiMatch;
+ EFI_UNICODE_COLLATION_STRLWR StrLwr;
+ EFI_UNICODE_COLLATION_STRUPR StrUpr;
+
+ //
+ // for supporting fat volumes
+ //
+ EFI_UNICODE_COLLATION_FATTOSTR FatToStr;
+ EFI_UNICODE_COLLATION_STRTOFAT StrToFat;
+
+ ///
+ /// A Null-terminated ASCII string array that contains one or more language codes.
+ /// When this field is used for UnicodeCollation2, it is specified in RFC 4646 format.
+ /// When it is used for UnicodeCollation, it is specified in ISO 639-2 format.
+ ///
+ CHAR8 *SupportedLanguages;
+};
+
+extern EFI_GUID gEfiUnicodeCollationProtocolGuid;
+extern EFI_GUID gEfiUnicodeCollation2ProtocolGuid;
+
+#endif
extern EFI_GUID efi_bus_specific_driver_override_protocol_guid;
extern EFI_GUID efi_component_name_protocol_guid;
extern EFI_GUID efi_component_name2_protocol_guid;
+extern EFI_GUID efi_console_control_protocol_guid;
extern EFI_GUID efi_device_path_protocol_guid;
extern EFI_GUID efi_dhcp4_protocol_guid;
extern EFI_GUID efi_dhcp4_service_binding_protocol_guid;
extern EFI_GUID efi_pci_io_protocol_guid;
extern EFI_GUID efi_pci_root_bridge_io_protocol_guid;
extern EFI_GUID efi_pxe_base_code_protocol_guid;
+extern EFI_GUID efi_serial_io_protocol_guid;
extern EFI_GUID efi_simple_file_system_protocol_guid;
extern EFI_GUID efi_simple_network_protocol_guid;
extern EFI_GUID efi_tcg_protocol_guid;
extern EFI_GUID efi_tcp4_service_binding_protocol_guid;
extern EFI_GUID efi_udp4_protocol_guid;
extern EFI_GUID efi_udp4_service_binding_protocol_guid;
+extern EFI_GUID efi_uga_draw_protocol_guid;
+extern EFI_GUID efi_unicode_collation_protocol_guid;
extern EFI_GUID efi_vlan_config_protocol_guid;
extern EFI_HANDLE efi_image_handle;
"ComponentName" },
{ &efi_component_name2_protocol_guid,
"ComponentName2" },
+ { &efi_console_control_protocol_guid,
+ "ConsoleControl" },
{ &efi_device_path_protocol_guid,
"DevicePath" },
{ &efi_driver_binding_protocol_guid,
"PciRootBridgeIo" },
{ &efi_pxe_base_code_protocol_guid,
"PxeBaseCode" },
+ { &efi_serial_io_protocol_guid,
+ "SerialIo" },
{ &efi_simple_file_system_protocol_guid,
"SimpleFileSystem" },
{ &efi_simple_network_protocol_guid,
"Udp4" },
{ &efi_udp4_service_binding_protocol_guid,
"Udp4Sb" },
+ { &efi_uga_draw_protocol_guid,
+ "UgaDraw" },
+ { &efi_unicode_collation_protocol_guid,
+ "UnicodeCollation" },
{ &efi_vlan_config_protocol_guid,
"VlanConfig" },
{ &efi_vlan_config_dxe_guid,
#include <ipxe/efi/Protocol/BusSpecificDriverOverride.h>
#include <ipxe/efi/Protocol/ComponentName.h>
#include <ipxe/efi/Protocol/ComponentName2.h>
+#include <ipxe/efi/Protocol/ConsoleControl/ConsoleControl.h>
#include <ipxe/efi/Protocol/DevicePath.h>
#include <ipxe/efi/Protocol/DevicePathToText.h>
#include <ipxe/efi/Protocol/Dhcp4.h>
#include <ipxe/efi/Protocol/PciIo.h>
#include <ipxe/efi/Protocol/PciRootBridgeIo.h>
#include <ipxe/efi/Protocol/PxeBaseCode.h>
+#include <ipxe/efi/Protocol/SerialIo.h>
#include <ipxe/efi/Protocol/SimpleFileSystem.h>
#include <ipxe/efi/Protocol/SimpleNetwork.h>
#include <ipxe/efi/Protocol/TcgService.h>
#include <ipxe/efi/Protocol/Tcp4.h>
#include <ipxe/efi/Protocol/Udp4.h>
+#include <ipxe/efi/Protocol/UgaDraw.h>
+#include <ipxe/efi/Protocol/UnicodeCollation.h>
#include <ipxe/efi/Protocol/VlanConfig.h>
/** @file
EFI_GUID efi_component_name2_protocol_guid
= EFI_COMPONENT_NAME2_PROTOCOL_GUID;
+/** Console control protocol GUID */
+EFI_GUID efi_console_control_protocol_guid
+ = EFI_CONSOLE_CONTROL_PROTOCOL_GUID;
+
/** Device path protocol GUID */
EFI_GUID efi_device_path_protocol_guid
= EFI_DEVICE_PATH_PROTOCOL_GUID;
EFI_GUID efi_pxe_base_code_protocol_guid
= EFI_PXE_BASE_CODE_PROTOCOL_GUID;
+/** Serial I/O protocol GUID */
+EFI_GUID efi_serial_io_protocol_guid
+ = EFI_SERIAL_IO_PROTOCOL_GUID;
+
/** Simple file system protocol GUID */
EFI_GUID efi_simple_file_system_protocol_guid
= EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID;
EFI_GUID efi_udp4_service_binding_protocol_guid
= EFI_UDP4_SERVICE_BINDING_PROTOCOL_GUID;
+/** UGA draw protocol GUID */
+EFI_GUID efi_uga_draw_protocol_guid
+ = EFI_UGA_DRAW_PROTOCOL_GUID;
+
+/** Unicode collation protocol GUID */
+EFI_GUID efi_unicode_collation_protocol_guid
+ = EFI_UNICODE_COLLATION_PROTOCOL_GUID;
+
/** VLAN configuration protocol GUID */
EFI_GUID efi_vlan_config_protocol_guid
= EFI_VLAN_CONFIG_PROTOCOL_GUID;
projects / thirdparty / ipxe.git / commitdiff
