PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
-PKG_SOURCE_DATE:=2025-02-17
-PKG_SOURCE_VERSION:=dd3577ec9f2d9d3ef5e35602d3fe731cb259ff39
-PKG_MIRROR_HASH:=0da921982b33a831dd19e570974a22ad2b1f3324397b1203a8a38d7d044b073a
+PKG_SOURCE_DATE:=2025-04-01
+PKG_SOURCE_VERSION:=c220fac7fdb35628ba53ff53ed36cf883a401161
+PKG_MIRROR_HASH:=26338b4f165eb2e90273cd61ed26715b99e496ccf738167e22ff9213ca42c973
PKG_FLAGS:=nonshared
include $(INCLUDE_DIR)/package.mk
netgear_sxk80 \
netgear_wax214 \
netgear_wax218 \
+ netgear_wax610 \
+ netgear_wax610y \
netgear_wax620 \
netgear_wax630 \
prpl_haze \
# 2. Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
#
# Board files should follow this name structure:
-# board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
+# board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq6018|ipq8074>
$(eval $(call generate-ipq-wifi-package,8devices_mango,8devices Mango))
$(eval $(call generate-ipq-wifi-package,aliyun_ap8220,Aliyun AP8220))
$(eval $(call generate-ipq-wifi-package,netgear_sxk80,Netgear SXK80))
$(eval $(call generate-ipq-wifi-package,netgear_wax214,Netgear WAX214))
$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
+$(eval $(call generate-ipq-wifi-package,netgear_wax610,Netgear WAX610))
+$(eval $(call generate-ipq-wifi-package,netgear_wax610y,Netgear WAX610Y))
$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
$(eval $(call generate-ipq-wifi-package,netgear_wax630,Netgear WAX630))
$(eval $(call generate-ipq-wifi-package,qihoo_360v6,Qihoo 360V6))
--- /dev/null
+#include "ipq6018.dtsi"
+#include "ipq6018-cp-cpu.dtsi"
+#include "ipq6018-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart3;
+ ethernet0 = &dp5;
+ label-mac-device = &dp5;
+
+ led-boot = &led_system_blue;
+ led-failsafe = &led_system_orange;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_blue;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ /*
+ * Netgear's U-Boot adds "ubi.mtd=rootfs root=mtd:ubi_rootfs"
+ * That fails to create a UBI block device, so add it here.
+ */
+ bootargs-append = " root=/dev/ubiblock0_1";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_orange: system-orange {
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_POWER;
+ function-enumerator = <0>;
+ gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_green: system-green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ function-enumerator = <1>;
+ gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_blue: system-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_POWER;
+ function-enumerator = <2>;
+ gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_lan_g {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <0>;
+ gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_lan_o {
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_2g_b {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <0>;
+ gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_2g_g {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <1>;
+ gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0radio";
+ };
+
+ led_5g_b {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <2>;
+ gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_5g_g {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <3>;
+ gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1radio";
+ };
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+
+ switch_lan_bmp = <ESS_PORT5>;
+ switch_mac_mode1 = <MAC_MODE_SGMII_PLUS>;
+
+ qcom,port_phyinfo {
+ port@5 {
+ port_id = <5>;
+ phy_address = <24>;
+ port_mac_sel = "QGMAC_PORT";
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio64";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio65";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+
+ qca8081_24: ethernet-phy@24 {
+ reg = <24>;
+ };
+};
+
+&dp5 {
+ status = "okay";
+ phy-handle = <&qca8081_24>;
+ label = "lan";
+};
+
+&blsp1_uart3 {
+ pinctrl-0 = <&serial_3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+
+ qcom,m3-dump-addr = <0x50100000>;
+};
DEVICE_VARS += TPLINK_SUPPORT_STRING
+define Build/wax610-netgear-tar
+ mkdir $@.tmp
+ mv $@ $@.tmp/nand-ipq6018-apps.img
+ md5sum $@.tmp/nand-ipq6018-apps.img | cut -c 1-32 > $@.tmp/nand-ipq6018-apps.md5sum
+ echo "WAX610" > $@.tmp/metadata.txt
+ echo "WAX610-610Y_V99.9.9.9" > $@.tmp/version
+ tar -C $@.tmp/ -cf $@ .
+ rm -rf $@.tmp
+endef
+
define Device/8devices_mango-dvk
$(call Device/FitImageLzma)
DEVICE_VENDOR := 8devices
endef
TARGET_DEVICES += netgear_wax214
+define Device/netgear_wax610-common
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Netgear
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@cp03-c1
+ SOC := ipq6010
+ KERNEL_IN_UBI := 1
+ IMAGES += ui-factory.tar
+ IMAGE/ui-factory.tar := append-ubi | qsdk-ipq-factory-nand | pad-to 4096 | wax610-netgear-tar
+endef
+
+define Device/netgear_wax610
+ $(Device/netgear_wax610-common)
+ DEVICE_MODEL := WAX610
+ DEVICE_PACKAGES := ipq-wifi-netgear_wax610
+endef
+TARGET_DEVICES += netgear_wax610
+
+define Device/netgear_wax610y
+ $(Device/netgear_wax610-common)
+ DEVICE_MODEL := WAX610Y
+ DEVICE_PACKAGES := ipq-wifi-netgear_wax610y
+endef
+TARGET_DEVICES += netgear_wax610y
+
define Device/qihoo_360v6
$(call Device/FitImage)
$(call Device/UbiFit)
projects / thirdparty / openwrt.git / commitdiff
